Loading...
06-1954 (RC)P.O. BOX 1504^� VOICE (760) 777-7012 78-495 CALLE TAMPICO FAX (760) 777-7011 LA QUINTA, CALIFORNIA 92253 BUILDING & SAFETY DEPARTMENT INSPECTIONS (760) 777-7153 BUILDING PERMIT Date: 7/25/06 Application Number: 06-00001954 Owner: Property Address: 79800 HIGHWAY 111 STE 110 99C ONLY STORES APN: 649-020-040- - - C/O JEFF GOLD Application description: REMODEL - COMMERCIAL 4000 E UNION PACIFIC AVE Property Zoning: REGIONAL COMMERCIAL COMMERCE, CA 90023 D d a Application valuation: 6000 Contractor: JUL 2 6 1006 Applicant: Architect or Engineer: RICLYN CONSTRUCTION INC. U !J PO BOX 336 THOUSAND PALMS, CA 92276 CITY OF INA 5 TA I ^_ (760)343-5500 EDEPT. �i( Lic. No.: 87113 LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect. License Class: B _Lic o.: 871135 ate: % / ontraaor: p OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031 .5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: (_ 1 1, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_) I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.).. I—) I am exempt under Sec. , B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: Lender's Address: LQPERMIT WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided , for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. X_ I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: - Carrier STATE FUND Policy Number 229-0022523 _ I certify that, in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if 1 should become subject to the workers' compensation provisions of Section 3700 of the Labor ni shall forthw/ith•o— p1y'WRT�[ se provisions. pp/C licant: _ 1n �)� WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety -for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La'Ouinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction-aauthorize representatives of this scc-oouu t to enter upon the above-mentioned property r inspection nFpos r� ure (Applicant or Agent): Application Number . . . . . 06-00001954 ------ Structure Information TI IN EXISTING SHELL BLDG ----- Other struct info . . . . . CODE EDITION. 01BMP04E05EN FIRE SPRINKLERS YES MIXED-USE OCCUPANCY B OCCUPANT LOAD .00 ---------------------------------------------------------------------------- 1ST FLOOR SQUARE FOOTAGE 1356.00 Permit BUILDING PERMIT Additional desc . . Permit Fee 81.00 Plan Check Fee 52.65 Issue Date . . . . Valuation 6000 Expiration Date 1/21/07 Qty Unit Charge Per Extension BASE FEE 45.00 4.00 9.0000 ---------------------------------------------------------------------------- THOU BLDG 2,001-25,000 36.00 Permit . . . ELECT - ADD/ALT/REM Additional.desc . Permit Fee . . . . 42.12 Plan Check Fee 10.53 Issue Date . . . . Valuation . . . . 0 Expiration Date 1/21/07 Qty Unit Charge Per Extension BASE FEE 15.00 1356.00 .0200 ---------------------------------------------------------------------------- ELEC GARAGE OR NON-RESIDENTIAL 27.12 Permit MECHANICAL Additional desc . Permit Fee . . . . 19.50 Plan Check Fee 4.88 Issue Date . . . . Valuation 0 Expiration Date 1/21/07 - Qty Unit Charge Per Extension BASE FEE 15.00 1.00 4.5000 -------------------------------------------------------`--------------------- EA MECH VENT INST/ DUCT ALT 4.50 Permit . . . PLUMBING Additional desc . Permit Fee . . . . 88.50 Plan Check Fee-. 22.13 Issue Date . . . . Valuation . . . 0 Expiration Date 1/21/07 Qty Unit Charge Per Extension . LQPERMIT Application Number . . . . 06-00001954 Permit . . . . . PLUMBING Qty Unit Charge Per Extension BASE FEE 15.00 8.00 6.0000 EA PLB FIXTURE 48.00 1.00 15.0000 EA PLB BUILDING SEWER 15.00 1.00 7.5000 EA PLB'WATER HEATER/VENT 7.50 1.00` 3.0000 EA PLB WATER INST/ALT/REP 3.00 ---------------------------------------------------------------------------- Special Notes and Comments NAIL SALON T.I. "FANCY NAILS" "B" OCCUPANCY, TYPE V -N CONSTR. 38 OCCUPANT LOAD,2001 CBC,CMC,CPC, 2004 CEC, 2005 ENERGY CODES ------------------------------- -------------------------------------------- Other Fees .. . . . . . . . . ACCESSIBILITY PLAN REVIEW 5.27 ENERGY REVIEW FEE 5.27 Fee summary Charged Paid Credited ------------------------------------- Due -------------------- Permit Fee Total 231.12 .00 .00 231.12 Plan Check Total 90.19 .00 .00 90.19 Other Fee Total 10.54 .00 .00 10.54 Grand Total 331.85 .00 .00 331.85 LQPERMIT UNLIMITED & RELIABLE NEW CUSTOM HOMES • ROOM ADDITIONS DOOR INSTALLATIONS • REMODELS P O Box 336 Thousand Paps CA 92276 760-343-5500 FAX 760-343-7260 July 26, 2006 City of La Quinta 78495 Calle Tampico ` La Quinta CA 92253 Re: Authorized signer To whom it may concern; Erin. Ortiz is an authorized signator for Riclyn Construction Inc. Please allow her to pull permits and/or sign fog Riclyn Construction. If you have any questions, please call our office at (760) 343-5000. Sincerely,- 'Rick incerely;'Rick Page Secretary y , vn l� c ltwe 7�9L 4 jo �,4,t�,r�y per; o� To PLAN c�eEKlN1� -. Bin # City of La Quinta Building U Safety Division P.O. Box 1504, 78-495 Calle Tampico U Quinta, CA 92253 - (760) 777-7012 Building Permit Application and Tracking Sheet Permit .# 1q I l ,Project Address:'Owner's Name: �%( r` zJ LC A. P. Number: Address: Legal Description: City, ST, Zip: Contractor: / Address: Telephone: Project Description: City, ST, Zip: Telephone: State Lic. # : // City Lic. #: �R.k 1Lvp 11A AMA, r— C IV il,c L SA. Lb ` Arch., Engr., Designer: b Address: I City, ST, Zip: Telephone: —' g _ State Lic. #: Name of Contact Person! 0 S �W Construction Type: Occupancy: Project type (circle one): New Addn Alter Repair Demo Sq. Ft.: S # Stories: C7 # Units: Telephone # of Contact Person: 7 (,p p Estimated Value of Project: o o d v APPLICANT: DO NOT WRITE BELOW THIS LINE # 1 Submittal Req'd Recd TRACKING. PERMIT FEES Sets Plan Check submitted Item Plan Check Deposit Amount Structural Calcs. Reviewed, ready for corrections f f Truss Calcs. Called Contact Person / Plan Check Balance Energy Calcs. Plans picked up ��� Construction Flood plain plan Plans resubmitted Mechanical Grading. plan' 2nd Review, ready for cor ctionsrssffwm Electrical' Subcontactor.List Called Contact Pe on plumbing Grant Deed Plans picked.up S.M.I. H.O.A. Approval Plans resubmitted Grading IN ROUSE:- ''" Review, ready for corrections/issue Developer Impact Fee Planning Approval Called Contact Person k A.I.P.P. Pub. Wks. Appr Date of permit issue School Fees / i Total Permit Fees Proudly serving the unincorporated areas of Riverside County and the Cities of: Banning Beaumont Cahmesa Canyon Lake Coachella 4 - Desert Hot Springs o� Indian Wells Indio .o Lake Elsinore `- La Quints Moreno valley Palm Desert Perris Rancho Mirage San Jacinto Temecula Board of Supervisors Bob Buster, District 1 John Tavaglione, District 2 Jeff Stone, District 3 Roy Wilson, District 4 Marion Ashley, District 5 RIVERSIDE COUNTY FIRE DEPARTMENT 210 West San Jacinto Avenue • Perris, California 92570 • (951) 940-6900 • Fax (951) 940-6910 City of La Quinta Building Department RE The Riverside.Co t .Fire De artment is grant' g the Fire clearance for the following location q Eno �e / v Please call if yo should have questions 760-863-8886 LM Respectfully Terry DeSoucy Fire Systems I spec c M May 3, 2006 O N S T A N A City of La Quinta Building Department R U C T I O N G E M E N T OWNER: 99 Cent Only Stores/Jefferson Plaza CONTRACTOR: Johnson -Benedetti Construction Management, Inc. PERMIT #: 05-5543 Bldg C JOB ADDRESS: 79800 Hwy 111, La Quinta, CA Suite 110 — Fancy Nails RE: Change in Schedule C In ADA bathroom, Finish Plumbing and FRP provided and installed. No longer responsible for 6 x 6 Quarry Tile floor with 6" cove in bathroom. ohnson— :ment, Inc. i Brian Benedetti Owner T 333 N. Palm Canyon Dr. Ste. 207 • Palm Springs, CA 92262 • Phone (760) 318-3995 9 Fax (760) 318-6134 ' — TITLE 24 REPORT Title 24 Report for: Fancy Nails 79800 Hwy_ 111 Suite 110 La Quinta, CA Project Designer: Gabriel Lujan 45175 Panorama Drive Suite A Palm Desert, CA 92260 760.674.8100 Report Prepared By: Dave Border Desert City's Plan Review & Title 24's 30209 San EI Jay Cathedral City, CA 92361W OF LA QUANTA (760) 864-7311 .BUILDING & SAFETY DEPT. APPROVED FOR CONSTRUCTION • DA � iDG BY �-• Job Number: Nail Salon Date: 6/16/2006 The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC - www.energysoft.com. EnergyPro 4.1 by EnergySoft Job Number. Nail Salon User Number: 6774 if of Of rFleF, C*pq TABLE OF CONTENTS Cover Page 1 Table of Contents 2 Nonresidential Performance Title 24 Forms 3 Form LTG -7-C Room Cavity Ratio Worksheet 9 Form LTG -MM Lighting Mandatory Measures 10 Lighting Inspection Checklist 11 EnergyPro 4.1 by EnergySoft Job Number: Nail Salon User Number: 6774 PERFORMANCE CERTIFICATE OF COMPLIANCE Part 1 of 3 PERF - PROJECT NAME Fancy Nails This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the DATE 6/16/2006 PROJECT ADDRESS 79800 Hwy 111 Suite 110 La QUlnta DATE OF PLANS SIGs IL� BUILDING CONDITIONED FLOOR AREA PRINCIPAL DESIGNER - ENVELOPE Gabriel Lujan TELEPHONE 760.674.8100 Building Permit# DOCUMENTATION AUTHOR Desert City's Plan Review & Title 24's TELEPHONE (760) 864-7311 Checked by/Date Enforcement Agency Use GENERAL INFORMATION This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations. This certificate applies only to a Building using the performance compliance approach. The documentation preparer hereby certifies that the documentation is accurate and complete. DATE OF PLANS SIGs IL� BUILDING CONDITIONED FLOOR AREA 1,560 Sq.Ft. consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this CLIMATE ZONE 15 BUILDING TYPE ® NONRESIDENTIAL HIGH RISE RESIDENTIAL [:] HOTELIMOTEL GUEST ROOM PHASE OF CONSTRUCTION NEW CONSTRUCTION ADDITION F—] EXISTING + ADDITION/ALTERATION STATEMENT OF COMPLIANCE This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations. This certificate applies only to a Building using the performance compliance approach. The documentation preparer hereby certifies that the documentation is accurate and complete. DOCUMENTATION AUTHOR Dave Border%&640 SIGs IL� DATE �p The Principal Designer hereby certifys that the proposed building design represented in this set of construction docum nts i consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this permit application. The proposed building as designed meets the energy efficiency requirements contained in sections 110, 116, through 118, and 140, 142, 143 or 149 of Title 24, Part 6. ENV. LTG. MECH. ❑ F� ❑ 1. 1 hereby affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code to sign this document as the person responsible for its preparation; and that I am licensed in the State of California as a civil engineer, mechanical engineer, or I am a licensed architect. ❑ ❑ El 2. 1 affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code Section 5537.2 or 6737.3 to sign this document as the person responsible for its preparation; and that I am a licensed contractor performing this work. ❑ ❑ ❑ 3. 1 affirm that I am eligible under Division 3 of the Business and Professions Code to sign this document because it pertains to a structure or type of work described as exempt pursuant to Business and Professions Code Sections 5537, 5538, and 6737.1. (These sections of the Business and Professions Code are printed in full in the Nonresidential Manual.) ENVELOPE COMPLIANCE Indicate location on plans of Note Block for Mandatory Measures Envelope Compliance Not In The Scope Of IS U ml a Required Forms PRINCIPAL ENVELOPE DESIGNER - NAME SIGNATURE LIC. NO. DATE LIGHTING COMPLIANCE Indicate location on plans of Note Block for Mandatory Measures LTG -1, LTG -2 Required Forms PRINCIPAL LIGHTING DESIGNER - NAME SI. ATU LIC. NO. DATE Gabriel Wan MECHANICAL COMPLIANCE Indicate location on plans of Note Block for Mandatory Measures Mechanical Compliance Not In the Scope Of Required Forms This Submittal PRINCIPAL MECHANICAL DESIGNER - NAME SIGNATURE LIC. NO. DATE EnergyPro 4.1 by EnergySoft User Number. 6774 Job Number: Nail Salon Page:3 of 11 1 PERFORMANCE CERTIFICATE OF COMPLIANCE Pall 2 of 3 PERF -1 PROJECT NAME DATE ANNUAL TDV ENERGY USE SUMMARY kBtu/s ft- r Standard ENERGY COMPONENT Design Space Heating 3.23 Space Cooling 315.49 Indoor Fans 131.75 Heat Rejection 0.00 Pumps & Misc. 0.00 Domestic Hot Water 19.58 Lighting 6x.34 Receptacle 122.06 Process o.o0 TOTALS: 658.45 Percent better than Standard: Proposed Compliance Design Margin 4.34 -1.11 301.07 14.43 123.22 8.53 0.00 0.00 0.00 0.00 19.25 0.34 13.27 53.07 122.06 0.00 0.00 0.00 583.20 75.25 11.4% 11.4% excluding process) BUILDING COMPLIES GENERAL INFORMATION Building Orientation Number of Stories Number of Systems Number of Zones S 180 deg Conditioned Floor Area Unconditioned Floor Area Conditioned Footprint Area Fuel Type 1,560 sgft. sgft. sgft. 1 0 1 1,560 1 Natural Gas Orientation Front Elevation (s) Left Elevation (W) Rear Elevation (N) Right Elevation (E) Total Roof Gross Area sgft. sqn. sgft. sqn.0 sgft. sqn.E= Glazing Area Glazing sgft. sgft. sgft. sqn. sgft. sqn. Ratio 388 120 30.9% 1,040 0 0.0% 388 0 0.0% 1,040 0.0°i° 2,856 120 1,560 0.0% Standard Proposed Lighting Power Density 1.000 W/sgft. 0.200 W/sgft. Prescriptive Env. Heat Loss 731 Btu/h 915 Btu/h Prescriptive Env. Heat Gain 47,740 Btu/n-F 57,325 Btu/h-F Remarks: Run Initiation Time: 06/16/06 10:21:04 Run Code: 1150478464 EnergyPro 4.1 by EnergySoft User Number. 6774 Job Number. Nail Salon PageA of 11 PERFORMANCE CERTIFICATE OF COMPLIANCE Part 3 of 3 PERF -1 PROJECT NAME FancyNails DATE 6/16/2006 ZONE INFORMATION System Name Zone Name Occupancy Type Floor Area (sqft.) Inst. LPD (W/sf)1 Ctrl. Allowed LPD Proc. Credits Area Tailored Loads (W/sf)2 (W/S3 (W/SQ4 (W/sf) HVAC System Salon Barber and Beauty Shop 1,560 -0.20 Notes: 1. See LTG -2-C 2. See LTG -4-C 3. See LTG -5-C (items marked with asterisk, see LTG -2 -C by others) (by others) 4. See LTG -6•C Items above require special documentation EXCEPTIONAL CONDITIONS COMPLIANCE CHECKLIST The local enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The local enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. The Zone "Salon" has a North/East/South Display Perimeter Credit of 113 ft. The Zone "Salon " has a West Display Perimeter Credit of 65 ft. I ne exceptional features listed in this performance approach application have specifically been reviewed. Adequate written justification and documentation for their use have been provided by the applicant. Authorized Siqnature or Stamp I EnergyPro 4.1 by EnergySoft User Number. 6774 Job Number: Nail Salon Page:5 of 11 1 CERTIFICATE OF COMPLIANCE (Part 1 of 3) LTG -1 -C PROJECT NAME DATE Fancy Nails 6/16/2006 INSTALLED INDOOR LIGHTING POWER FOR CONDITIONED AND UNCONDITIONED SPACES INSTALLED WATTS INSTALLED LIGHTING, CONDITIONED SPACES (From LTG -2-C) 312 PORTABLE LIGHTING (From LTG -3-C) 0 LIGHTING CONTROL CREDIT, CONDITIONED SPACES (From LTG -4-C) 0 CONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 312 INSTALLED LIGHTING, UNCONDITIONED SPACES (From LTG -2-C) 0 LIGHTING CONTROL CREDIT, UNCONDITIONED SPACES (From LTG -4-C) 0 UNCONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 0 ALLOWED INDOOR LIGHTING POWER FOR CONDITIONED SPACES ❑ COMPLETE BUILDING METHOD (From LTG -5-C) ALLOWED ❑ AREA CATEGORY METHOD (From LTG -5-C) WATTS ❑ TAILORED METHOD (From LTG -5-C) ALLOWED LIGHTING POWER 312 ALTERNATE COMPLIANCE ❑X PERFORMANCE METHOD ❑ COMMMON LIGHTING SYSTEM (From LTG -8-C) ALLOWED INDOOR LIGHTING POWER FOR UNCONDITIONED SPACES From LTG -5-C) 0 MANDATORY INDOOR AND DAYLIGHTING AUTOMATIC CONTROLS CONTROL LOCATION CONTROL IDENTIFICATION CONTROLTYPE (Auto Time Switch, Dimming, etc.) Check if SPACE CONTROLLED Daylighting NOTE TO FIELD EnergyPro 4.1 by EnergySoft User Number. 6774 Job Number. Nail Salon Page:6 of 11 1 CERTIFICATE OF COMPLIANCE (Part 3 of 3) LTG-1-C PROJECT NAME Fancy Nails DATE 6/16/_2006 Designer: This form is to be used by the designer and attached to the plans. Listed below are all the acceptance tests for lighting systems. The designer is required to check the boxes by all acceptance tests that apply and list all equipment that require an acceptance test. If all equipment of a certain type requires a test, list the equipment description and the number of systems to be tested in parentheses. The NJ number designates the Section in the Appendix of the Nonresidential ACM Manual that describes the test. Also indicate the person responsible for performing the tests (i.e. the installing contractor, design professional or an agent selected by the owner). Since this form will be part of the plans, completion of this section will allow the responsible party to budget for the scope of work appropriately. Building Departments: Before an occupancy permit is granted for a newly constructed building or space, or a new lighting system system serving a building or space is operated for normal use, all control devices serving the building or space shall be certified as meeting the.Acceptance Requirements for Code Compliance. In addition a Certificate of Acceptance, LTG-1-A, Forms shall be submitted to the building department that: A. Certifies plans, specifications, installation certificates, and operating and maintenance information meet the requirements of§10-103(b) and Title 24 Part 6. Test Descri tion Test Performed BY: O LTG-2-A: Lighting Control Acceptance Document - Occupancy Sensor Acceptance - Manual Daylight Controls Acceptance - Automatic Time Switch Control Acceptance Equipment requiring acceptance testing O LTG-3-A: Automatic Daylighting Controls Acceptance Document Equipment requiring acceptance testing EnergyPro4.1 by EnergySoft User Number: 6774 Job Number: Nail Salon Page:7 of 11 U I N 6 J N O r W J W V/'V'A 0 `Z i V J N w O O c Z ca Z fC LL LU Q z N N O O N M M M M aL N U) z a E 0 z 0 m E z' N v N_ Installed M Watts (G x 1) Number of •p Luminaires d CEC zo N1 = Default? C Watts per Luminaire Number of LL Ballast per Luminaire Watts w per H Lamp m Number of 0 Lamps per fA CL Luminaire R _ J U Lamp Type O O N O M . C N O L Q U O ._ O • Cl F O J '0 a) rn 0 3 a� E TTI - M z N N O O N M M M M aL N U) z a E 0 z 0 m E z' N v ROOM CAVITY RATIO WORKSHEET (RCR>=3.5) LTG -7-C NAME Fancy Nails AUTHOR DATE ENFORCEMENT AGENCY BY Y TE A B C D E F Room Name Task/Activity Description Room Length (L) ft Room Width (V) ft Room Cavity Height (H) (ft) Room Cay. Ratio 5xHx(L+W) /(Lxw) A B C D E F Room Name Task/Activity Description Room Area (A) M Room Perimeter (P) (ft) Room Cavity Height (H) (ft) Room Cay. Ratio 2.5 x H x P /A EnergyPro 4.1 by EnergySoft User Number. 6774 Job Number: Nail Salon LIGHTING MANDATORY MEASURES LTG -MM NAME Fancv Nails DATE 6/16/2006 DESCRIPTION Designer Enforcement §131(d)1 For every floor, all interior lighting systems shall be equipped with a separate automatic control to shut off the lighting. This automatic control shall meet the requirements of Section 119 and may be an occupancy sensor, automatic time switch, or other device capable of automatically shutting off the lighting. §131(d)20verride for Building Lighting Shut-off: The automatic building shut-off system is provided with a manual, accessible override switch in sight of the lights. The area of override is not to exceed 5,000 square feet. §119(h) Automatic Control Devices Certified: All automatic control devices *specified are certified, all alternate equipment shall be certified and installed as directed by the manufacturer. FX §111 §111 Fluorescent Ballast and Luminaires Certified: All fluorescent fixtures specified for the project are certified and listed In the Directory. All installed fixtures shall be certified. §132 Tandem Wiring for One and Three Lamp Fluorescent Fixtures: All one and three lamp fluorescent fixtures are tandem wired with two lamp ballasts where required by Standards Section 132; or all one and three lamp fluorescent fixtures are specified with electronic high -frequency ballasts and are exempt from tandem wiring requirements. §131(a) Individual Room/Area Controls: Each room and area in this building is equipped with a separate switch or occupancy sensor device for each area with floor -to - ceiling walls. §131(b) Uniform Reduction for Individual Rooms: All rooms and areas greater than 100 square feet and more than 0.8 watts per square foot of lighting load shall be controlled with bl-level switching for uniform reduction of lighting within the room. §131(c) Daylight Area Control: All rooms with windows and skylights that are greater than 250 square feet and that allow for the effective use of daylight in the area shall have 50% of the lamps in each daylit area controlled by a separate switch; or the effective use of daylight cannot be accomplished because the windows are continuously shaded by a building on the adjacent lot. Diagram of shading during different times of the year is included on plans. ® §131(e) Display Lighting. Display lighting shall be separately switched on circuits that are 20 amps or less. EnergyPro 4.1 by EnergySoft User Number: 6774 Job Number. Nail Salon Page: 10 of 11 LIGHTING INSPECTION CHECKLIST LTG -11 PROJECT NAME INSPECTION DATE Fancy Nails 6/16/2006 FIXTURE CODE TYPE DESCRIPTION LAMP TYPE LAMP QUANT. NUMBER OF FIXTURES WATTS PER FIXTURE FIELD NOTES 2 4 ft Fluorescent T8 ElecRO F32T8 2 6 48.0 4 4 ft Fluorescent T8 ElecRO F32T8 4 14 91.0 Type DESCRIPTION MH METAL HALIDE INC INCANDESCENT INC/LV INCANDESCENT LOW VOLTAGE CFL COMPACTFLUORESCENT FL FLUORESCENT O OTHER EnergyPro4.1 by EnergySoft r User Number. 6774 Job Number: Nail Salon Paae:11 of 11 1 Designed for use as a recovery heater having its own storage tank for deionized water. FEATURES ASME TANK CONSTRUCTION - Type 3161 stainless steel construction, 125 psi working pressure (65 thru 120 gallons), 150 psi working pressure (5 thru 50 gallons): FOAM INSULATED - To meet rigorous state codes. STAINLESS STEEL IMMERSION.HEATERS - Heavy-duty medium watt'density elements (threefimmersion heater) have stainless steel sheathing- and prewired leads: provide excellent protection against oxidation and scaling. Input ranges from 3KW to 90KW available (see accompanying chart). STANDARD VOLTAGES- 208,240 and 480 volt single and three phase.' Single phase 208 and 240 are convertible to three phase. All 208 and 240 volt at 24KW and below are supplied phase convertible (single to three and vice versa). 277 volt single phase also available. Consult factory for 120 volt power circuit availability. TERMINAL BLOCK - To accept copper or aluminum leads (on units with more than one contactor). IMMERSION THERMOSTAT - Close differential immersion MEETS OR EXCEEDS THE REQUIREMENTS type thermostat provides the:accurate temperatur cora OF required for commercial applicationss-(adjustable t ougb, range of 95° to 180°F). - t BUILDING & S EpA C EC .120. VOLT. CONTROL CIRCUIT 120 volt contr I circuit A P P R OV E WIpowered by fused transformer. FO � C I STR� I I 'MAGNETIC CONTACTORS Heavy-duty UL r t�c� 0 6 100,000 cycles. rr POWER,CIRCUIT. FUSING (120 amp current draw and above) - Meets National Electric Code and UL requirements that water heaters must have internal fusing when current ..draw exceeds 120 amps. OPTIONAL INTERNATIONAL VOLTAGES -380,415,575 and 600 volts three-phase available. OTHER STANDARD FEATURES • Simplified circuitry, color -coded for ease of service Immersion' manual reset'high limit • Hinged control compartment door •: ASME T & P relief valve. 0 u'ra-Power SUPREME COMMERCIAL ELECTRIC DEIONIZED WATER HEATERS DSED-5 thru 120 LIMITED WARRANTY OUTLINE If the tank should leak anytime during the first three years, under the terms of the warranty. A. O. Smith will repair or replace the heater; installation, labor,. handling and local delivery extra. THIS OUTLINE IS NOTA WARRANTY. For complete information, consult the written warranty orA. O. Smith Water Products Company. , Warranty does not apply to product installed outside of the United States of America or its territorial possessions and Canada. Revised July 2003.. / - / A 202.5 4 r. S DSED-5 thru 50 3/4 NPT AL OUTLET 3/4 NPT RELIEF VALVE OPENING -Q'-Q INLET C DRAIN .OPENING FIELD WIRE L ENTRANCE �B HI -LIMIT ACCESS HINGED ACCESS A DOOR DRAIN 3/4 NPT INLET OPENING -_ D T DSED-65 thru 120 1 1/4 NPT OUTLET / 314 NPT RELIEF 1 VALVE OPENING • a C — —O - 45° DRAIN OPENING INLET CE FIELD WIRE ENTRANCE L--- B I HI -LIMIT ACCESS HINGED ACCESS A DOOR 1 1/4 NPT INLET DRAIN OPENING., • o- D I MEETS OR EXCEEDS CURRENT REQUIREMENTS OFASHRAE 90.1-1999 ALL DIMENSIONS IN INCHES A. O. Smith Model Nominal Gallon Capacity Maximum KW Input Maximum Number of* Immersion Heaters Height A Width (Dia.) B Depth C D Inspection O enin Inlet Outlet Opening Relief Opening Approx. Ship. Wt - Lbs. DSED-5 5 3 1 201/4 161/4 201/8 5 Optional 4" x 6" 3/4 3/4 82 DSED-10 10 6 261/8 183/4 223/4 7 116 DSED-20 20 18 2 27 201/2 25 8 146 DSED-30 30 24 36 201/2 25 8 162 DSED-40 40 36 451/2 201/2 25 81/4 206 DSED-50 50 90 5 541/2 201/2 25 8 3/4 236 DSED-65 65 90 531/2 .261/2 31 113/4 1 1/4 294 DSED-80 80 90 521/4 28 323/8 12 310 DSED-100 100 90 61 28 323/8 12 354 DSED-120 119 90 65 30 34.25 123/4 420 `Each immersion heater contains three electric elements. The relief opening is now 3/4" in all cases. RECOVERY RATE IN GALLONS PER HOUR" - Temperature Rise °F Standard KW Input Btu/ 'Hour 30° 40° 50° 60° 70° 80° 90° 100° 110° 120°F33CA8, ° 140° 3 10,239 41 31 24 20 17 15 13 12 11 10 12.5 25.0 37.5 50.0 62.5 75.0 100.0 125.0 150.0 187.5 225.0 250.0 312.5 375.0 9 6 20,478 82 62 49 41 35 31 27 25 22 21 3 18 9 30,717 123 92 74 62 53 46 41 37 34 31 90- 26 12 40,956 164 123 98 82 70 61 55 49 45 41 35 15 51,195 205 154 123 102 88 77 68 61 56 51 47 44 18 61,434 246 184 148 123 105 92 82 74 67 62 57 53 - 24 81,912 328 246 197 164 140 123 109 98 90 82 76 70 30 102,390 410 308 246 205 176 154 137 123 112 103 95 88 36 122,868 492 369 295, 246 211 184 164 148 134 123 113 105 45 153,585 615 461 369 307 263 230 205 184 168 154 142 132 54 184,302 738 554 443 359 316 277 246 221 201 185 170 158 60-- 204,780 819 615 492 410 351 307 273 246 223 205 189 176 75-- 255,975 1025 768 615 512 439 384 341 307 279 256 236 219 90" 307,170 1229 922 738 615 527 461 410 369 335 307 284 263 Figured at 1 KW (3413 Btu) = 4.1 gallons at 100°F temperature rise. To determine recovery rate per minute, divide recovery rate per hour by 60. NSF ratings may be obtained by multiplying above figures by 0.98. " Available on 50 gallon models or larger. STANDARD KW INPUTS Standard Immersion Heaters- Number of 50A Contactors Full Load Current In Amperes KW Ratings No. of Wattage 208V 240V 480V Single Phase Three Phase 208V 240V 277V 480V 208V 240V 480V 3 6 9 12 15 1 1 1 1 1 3,000 6,000 9,000 12,000 15,000 1 1 1 14.4 28.8 43.3 57.7 72.1 86.5 115.4 144.2 173.1 216.3 N/A N/A N/A N/A 12.5 25.0 37.5 50.0 62.5 75.0 100.0 125.0 150.0 187.5 225.0 250.0 312.5 375.0 10.8 21.2 32.5 43.3 54.2 65.0 86.6 108.3 130.0 162.5 194.9 216.6 270.8 324.9 6.3 12.5 18.8 25.0 31.3 37.5 50.0 62.5 75.0 93.8 112.5 125 156 188 8.3 16.7 25.0 33.3 41.6 50.0 66.6 83.3 99.9 124.9 149.9 166.7 208.4 1 250 7.2 14.4 21.7 28.9 36.1 43.3 57.7 '72.2 86.6 108.3 129.9 145 181 1 217 3.6 7.2 10.8 14.4 18.0 21.7 28.9 36.1 43.3 54.1 65.0 .72 90 1. 108 18 24 30 `1 2 2 18,000 12,000 15,000 2 2 36 45 54 -2 3 3 18,000 15,000 18,000 3 3 2 60- 4 15,000 4 4 75-- 5 15,000 5 5 3 90- 5 18,000 - 208V models use one additional immersion heater. -` Available on 50 gallon models or larger. Each immersion heater contains three electric elements. A 202.7 OPTIONAL EQUIPMENT & CONSTRUCTION 150 OR 160 PSI WORKING PRESSURE — Available when required. Must be specified at time of order. HANDHOLE CLEANOUT — 4" x 6" size. CONTROL OPTIONS: OVERRIDE SWITCHES —A simple form of load control allows all or part of unit input to be controlled manually. Up to one override switch per contactor is available. INDICATING/PILOT LIGHTS — For indicating element operation and/or switch closure. Up to one indicating light available for each switch 'and/or contactor is available. THERMOSTAT STEP — The simplest form of modulation. Allows elements to be stepped on in groups or individually by specifying additional thermostats (up to 1 per contactor). SEQUENCER—Two or three step time delay sequencer provides for stepping of elements in groups or individually (maximum of 1 step per contactor). TIME CLOCK — Seven day clock may be programmed for up to 14 on/off operations per week. Skip a day feature allows for weekend shutdown. IMMERSION AUTO RESET HIGH LIMIT — Adjustable automatic reset type. Provides additional protection against high temperature conditions. SAFETY DOOR INTERLOCK — Prevents openings of control panel door when heater power supply is energized. NOTE: Once door is open, the heater may be energized if necessary for service diagnosis. POWER CIRCUIT FUSING — Sub -divides internal circuitry with maximum of 60 amp. fuses. Supplied as standard when required by NEC and UL. ALARM HORN - Horns may be furnished to warn of any condition in the heater for which sensors have been specified. SUGGESTED SPECIFICATION The heater shall be a glass -lined Dura -Power Deionized Supreme Commercial Electric Model No. as manufactured by A. O. Smith Corporation. Heater should be rated at KW, volts, phase, 50/60 cycle AC and constructed in accordance with ASME Code, shall bear appropriate symbol and be listed with the National Board as required. Heater shall be listed with Underwriters' Laboratories. The tank shall be constructed from corrosion resistant type 3161 stainless steel. In addition to the tank, all internal wetted surfaces shall be stainless steel, Teflon, Gaylon; nickel or chrome. The entire vessel is to be enclosed in a round steel enclosure with baked enamel finish. Control compartment to be hinged and shall house 120 volt control circuit transformer, transformer fusing, magnetic contactor(s), immersion style operating thermostat(s), high limit thermostat(s), element fusing per N.E.C., and commercial grade stainless steel sheathed flange mounted elements with prewired terminal leads. Temperature controls include limiting switch which will require resetting manually in the event the temperature reaches 1903F. Foam insulation shall exceed latest requirements of ASH RAE 90.1-1999 for heat loss efficiency. Heater shall include ASME T & P relief valve. A LUL.0 A.O. Smith Water Products Co., Inc. On Line A. O. Smith www.aosmithwaterheaters.com Water Products Company Ashland City, TN For Technical Information and A Division of A. O. Smith Corporation Automated Fax Service, A. O. Smith Corporation reserves the right to make product changes Phone: 800-527-1953 or improvements at any time without notice. U A. U. Smith Corp., 2003 Printed in U.S.A.. Certificate of OccupancyO p U = ry T-Vf 4 Z4P B L L.,weouhn �4 � G� OF'T1Building & Safety Department This Certificate is issued pursuant to the requirements of Section 109 of the California Building i R Code, certifying that, at the time of issuance, . this structure was in compliance with the provisions of the Building Code and the various ordinances of the City regulating building construction and/or use. BUILDING ADDRESS: 79-800 HIGHWAY 111, STE. 110 Use classification: COMMERCIAL - "FANCY NAILS" Building Permit No.: 06-1954 Occupancy Group: R1 Type of Construction: V-N Land Use Zone: CR ; Owner of Building: 99 C ONLY STORES Address: 4000 UNION PACIFIC AVE. N f: City, ST, ZIP: COMMERCE, CA 90023 By: DANIEL P. CRAWFORD, JR. -7-64-t Date: AUGUST 25, 2006 Building Official i POST IN A CONSPICUOUS PLACE 7111- T* � d Ali ni 4 Vx� f �`Y' >� F r�z a tv�� ' :.i. b �,� r � �1�f •u �i '���a•���' L g' y ¢ ��°-fid- 3 �r-' ��9 ° . 4 "Tl - _ � � 'kM-•E✓�?"�.r�� • s �� �\\� ' r'�a� 'fit �' h�'F`' �'L�:s'� , /! � - �*'�y.��"`"ia �' ` n..°�`�+-4 �a�. .;p1t��„P�t•.�-�'�'��'� r w ��" .§Y a ,Y�'srm >a h�. • ° rs � "�,av' i•u�ITJYr1:'►��r.��rp� t�-,�' ° 00 'li� L-, J _ 4 a }} • f " 3 e-. ��� �} »dam �`...��,^.'' S .. - ., ., J `J`�'=^!/`�' • r r ° •hv '� � �: '-._ '. ,, ter..,.-.._.�, - - � �,�__�—._t' __ ... fir)% t ..�Jyy � _ -i`�., r•,,e � r�`- _:� a` I . �. ;� � °` - - tYi �^� t ��tS...e \� by �.,>t c•, -p FT �c-: r a ,. LDINO CPT. r i V ; �' r w .r t 5`� 7 - ,�<�_;,� •{ it ,ti.. t .�—�. 1 r .1..,� r '�af -.:w,. �. n. �. tt r � � - �Sz$ � :�. 3 : �:� 1,®_ E.. ,3'it . , a ``F4y• , Z "<r''. �..3.. - � . �^• a _�.<,;r -' -j.- 4_ ! ,-.f '--��' -' �°�', i ! x e. t'''•l„ it '.s -, ^-1��� ° �`i --* _ _ u+, ..:'�� L �e � �„ -u✓.' �. ..phi ' � i '' t x 6 .� , -,..Y" r •-,A � ...��.... `. u.,.*r" .� ��L�,s., ���' �`'!� _ _ o f°� r � �_,. >� �.�..'.� E��.V i-a.,f�,'��,�c1°S v. X'?��.a } ,{rr3'� e¢- - Lotus 0 u .r White 6231 � `5391 676 5389 4, -� R—ME UALUIE_S-, �i _ CSlRJL•476 l•CAfi.JrT.� o 'D O Salon Depot [=rani e Tulip Copyright 2004 LC w�.lctradingcorp._< FR 1/ P.f1;; GOP, a i 1 �i _ CSlRJL•476 l•CAfi.JrT.� o 'D O Salon Depot [=rani e Tulip Copyright 2004 LC w�.lctradingcorp._< FR ' P.f1;; GOP, ago TM SpaMate Legen, AMS -5 Salon Depot 13916-A Brookhurst St., /`A ^-.1 7q - $' 0 WHIRLPOOL SPA 0 or SpaMate 'm Legend � N C Q ao AMS-5ooD1H Orthopedic designed chair back and seat for the ultimate in comfort.The SpaMate LegendTM comes with an easy to use remote motorized chair with reclining back, and front to rear motion. Extra -wide seating for a true "first class accomodations"feeling. Upholstered in UltraLeather HPTM fabric for the feel of real leather, but far better suited for commercial applications where sanitary conditions are &h paramount. A low profile, slim -line design, the SpaMate legend AMS-500TWI is a mere 31" wide. Ideal for those with limited floor space. Exclusive to AmeriSpa, SpaMate LegendTMAMS-500D SpaTronicsTM Digital Control System with LED Display: • Temperature Monitoring: LED temperature readout allows the user to accurately adjust the water temperature for even the most sensitive of clients. • Auto Timer. One touch control activates both the whirlpool and the built in 20-15-10 minute count down timer. Promotes better time management of appointments and services. • Standard Drain Discharge Pump: Automatically drains the spa basin of wastewater and shuts itself off. Shlatsu style Rollerball massage system provides a relaxing, soothing massage for your clients. Fully auto- mated or user selectable. SpaMate Legend AMS-500ATm uses Airswitch Activation to control whirlpool. Gravity drain only. SpaMate Legend AMS-500D"Auses 6 specifically positioned jets (4 sidewall, 2 bottom) to provide direct massage to the ankles and bottoms of the feet.The massaging action helps to improve the circulation. Jets are 100% draining, ensuring cleanliness. SpaMate Legend AMS-500ATM uses 4 jets (2 siciewall, 2 bottom) only. Extra large tub allows the technician to work directly in the basin for a variety of pedicure services. Optional Equipment Optional SpaTronicsTM Media System with PowerTrayTm. Features a 6.8" TFT -LCD Screen, DVD playback, CD, SCVD, VCD, and MP-3.Open architecture design for future innovations from AmeriSpa, LLC. Warranty for DVD player is provided by DVD manufacturer only. Ultra low noise whirlpool system is designed to make the pedicure service a relaxing and peaceful experience. High quality Hand Shower for rinsing legs, feet, cleaning, and disinfecting the spa. The SpaMate LegendTm is constructed of High Density Poly Ethylene (HPDE) which is not affected by acetone or ketone based chemicals. Imponents used in the manufacture of the SpaMate I- are either/or UPC, IAPMO, ANSI listed. LSpeclficationsT_ u_ T., L. - ShippingWeight;r_:280pounds:*, Base:. .531Lx31'Wx1T H:..,. ' S Spa Overall:. 53"Lx31'Wx50'H(72•Lwithchairfully-Illed) aasinCapadq_:, 6USGallons Shell Materiaal:High Density Polyethylene (HDPE) ' Pump Motor..c -x.10.0 amps, 115 VAC,60 H7(220VA60 Hz AU, EU) Discharge Pump:;�3.2 amps,115VAC,60Nz(220VAC 50 Hz AU,EU) 'ElectrtalReq':%^20amps,120VAC,60Hz(220/240VACSOHzAU,EU); AmeriSpa, LLC. �p� (" 2539 Mercantile Dr. Bldg 3,4&5 • Rancho Cordova, CA 95.742 • USA Amery+pa t" Toll Free: (USA) 888.533.0238 • Intl: 916.859.0859 • Fax: 916.859.0881 • Email: sales@amerispa.com WHIRLPOOL 8 0200 Mwspa LLCM epaisnbw and Pricy s4ettodine wow naiu;5psaro Is P&A Paftmea* o a vadwu or Pmri5w LLC SpaMate LM.,d 6 tadw i.ofArtm'Spaandlvou* a w, eHlaud Wth attic cwf.: SpaMate LegendT" AMS -500 Series Our top-of-the-line pedicure spa features our Bio-SmartTM Ready digital control system, high torque ultra low noise whirlpool system, soothing rollerball massage and luxurious extra -wide seating for that totally relaxing and safe pedicure service experience your clients deserve. The AMS -500 D spa has six powerful yet soothing jets: 2 in front of the feet, 2 at the side of the feet and ankles and 2 flow -rate adjustable at the bottom of the feet. Built-in discharge drain pump simplifies waste line connections. Our AMS -500 A is now equipped with the Bio-SmartTM Ready digital control system, but does not include discharge drain pump (gravity drain only) and has only 4 jets, 2 front and 2 bottom. SiaAcat� Legend; "wherebeau y is more SpaMate AMS -500 A&D are UL Listed. Classified in accordance with sal w.ammeri pa.com on ANSI/ASME Al 12.19.7M 1995 Terms of Use All AmeriSpa's products are manufactured in the U.S.A. AmeriSpa®, LLC 2539 Mercantile Dr. ©1996-2004 AmeriSpa, LLC. All specifications and prices subject to change Rancho Cordova, CY A Only) 1-888-� US without notice. Bio-SmartTM System is Patent Pending. AmeriSpa®, Bio- ( I S 1-916-859-08 SmartTM and SpaMate LegendTM are trademarks of AmeriSpa®, LLC. The ()1-916-859-08f water "A" icon is a registered service mark of AmeriSpa®, LLC. Ameri- (Fax) http://www.amerispa.com/ams_500.html - 6/15/2006