09-1060 (RER)P.O. BOX 1504
78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
Application Number:
Property -Address;
APN:
Application description:
Property Zoning:
Application valuation:
Applicant:
6whMAW✓
09-00001060
56242 PEBBLE .BEACH
775-131-093- - -
REMODEL - RESIDENTIAL
LOW DENSITY RESIDENTIAL
11000
Architect or Engineer:
t �
4
BUILDING & SAFETY DEPARTMENT
BUILDING PERMIT
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with
Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect.
license Clas . B License No.: 684857
/
v Date: Contract
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the
following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with,Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031 .5 by
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).:
(_) I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
Contractors' State License Law does not apply to an owner of property who builds or improves thereon,
and who does the work himself or herself through his or her own employees, provided that the
improvements are not intended or offered for sale. If, however, the building or improvement is sold within
one year. of completion, the owner -builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.).
(_) I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed
pursuant to the Contractors' State License Law.).
( 1 1 am exempt under Sec. , B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name: _
Lender's Address:
LQPE%NlIT
Owner:
KEN GREENAN
56242 PEBBLE BEADH
LA QUINTA, CA 92253
Contractor:
EDWARDS CONSTRUCTION INC'
51455 DESERT CLUB DRIVE
LA QUINTA, CA 92253
(760)777-8202
Lic. No.: 684857
VOICE.(760) 777-7012
FAX (760) 777-7011.,,,
INSPECTIONS (760) 777-7153
Date: 10/30/09
a U
OCT 0 2099
CITY OF LA QUINTA
WORKER'S COMPENSATION DECLARATION '
I hereby affirm under penalty of perjury one of the fallowing declarations:
_ I have and will maintain a certificate'of consent to self -insure for workers' compensation, as provided
for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued.
I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
Code, for the performance of the work for which this permit is issued. My workers' compensation
insurance carrier and policy number are:
Carrier GRANITE STATE Policy Number WC 555-61-55
I certify that, in the performance of the work for which this permit is issued, I shall not employ any
person in any manner so as to become subject to the workers' compensation laws of California,
and agree that, if I should become subject to the workers' compensation provisions of Section
�OL]pf phe Labore.tall forthwith comply with those provisions. .
Date: Applic
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND S L
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
conditions and restrictions set forth on this application. -
1 . Each person upon whose behalf this application is made, each person at whose request and for
whose benefit work is performed under or pursuant to any permit issued as a result of this application,
the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
of La Quinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not commenced
within 180,days from date of issuance of such permit, or cessation of work for 180 days will subject
permit to cancellation.
I certify that I have read this application and state that the above information is correct. I agree to comply with all
city and county dmances and state laws relating to building construction, and hereby authorize representatives
of this cou y enter u on the above- ed property for inspection purposes.
Date: ignature (Applicant or Ag
Application Number . . . . . 09-00001060 .,
Structure Information 109 SF ADDITION TO DEN
Construction Type . .
. . . TYPE V, UNPROTECTED
Occupancy Type . . .
. . . DWELLG/LODGING/CONG <=10
Flood Zone . .
. . . NON -AO FLOOD ZONE
Other struct info . .
. . . CODE EDITION
2007
--------------------------------------
# BEDROOMS.
--------------------------------------
.00
Permit . . . . . .
BUILDING PERMIT
Additional desc .. .
109 SF ATRIUM CONY. TO DEN
Permit Fee . . . .
126.00 Plan Check Fee
81.90
Issue Date . . . .
Valuation . .
. . .11000
Expiration Date
4/28/10
Qty Unit Charge
Per
Extension
BASE FEE
45.00
9.00 9.0000
-------------------------------------------------------
THOU. BLDG 2,001-25,000
--------------------
81.00
Permit . . . .ELECT
- ADD/ALT/REM
Additional desc . .
Permit Fee
29.25 Plan Check Fee
7.31
Issue Date . . . .
Valuation
0
Expiration Date
4/28/10
Qty Unit.Charge
Per
Extension
BASE FEE
15.00
19.00 .7500
-----------------------------------------------------------------------------
PER ELEC DEVICE/FIXTURE 1ST 20
14.25
Permit . . .
MECHANICAL
Additional desc .
Permit.Fee . . . .
19.50 Plan Check Fee
4.88
Issue Date
Valuation
0
Expiration Date
4/28/10
Qty Unit Charge
Per
Extension
BASE FEE
15.00
1.00 4.5000
---------------------------------------------------
EA MECH VENT INST/ DUCT ALT
-------------------------
4.50
Permit . . .
PLUMBING
Additional desc . .
Permit Fee . . . .
21.00 Plan Check Fee
5.25
Issue Date . . . .
Valuation
0
Expiration Date
4/28/10
Qty Unit Charge
Per
Extension.
LQPERA1IT
_,r... ,4ZP
LQPER,%IIT
Application Number 09-00001060
Permit . . . . . . -PLUMBING
Qty Unit Charge Per
Extension
BASE FEE
15.00
1.00 6.0000 EA PLB ROOF DRAIN
6.00
----------------------------------------------------------------------------
Special.Notes and Comments
109 SF ATRIUM CONVERSION TO DEN (LIVING"
AREA) TYPE V -B CONSTRUCTION R-3
OCCUPANCY. **DEN IS NOT APPROVED AS A
SLEEPING ROOM** 2007 CODES
----------------------------------------------------------------------------
Other Fees . . . . . . . . .BLDG STDS ADMIN
(SB1473)
1.00
ENERGY REVIEW
FEE
8.19
STRONG MOTION
(SMI) - RES
1.10
Fee summary Charged Paid
------------------------------
Credited
----------
Due
-----------------
Permit Fee Total 195.75 .00
.00
195.75
Plan Check Total' 99.34 .00
.00
99.34
Other Fee Total 10.29 .00
.00
10.29,
Grand Total 305.38 .00'
.00
305.38
r
Bin, #
`
City of La Quinta
Building a Safety Division ,0
P.O. Box 1504, 78-495 Calle Tampico,
La Quinta, CA 92253 - (760) 777-7012
-Building Permit Application and'Tracking Sheet
Permit #
`O �O
Project Address:' 5-6- z'
Owner's Name:
A. P. Number: z--7 7
Address: 9�> 'rj 4-z ( �)
Legal Description: VY4 IT -407 TP. Zo-7 ('7
Contractor:�^
City, ST, Zip: L4 too/ "-w e'er
�I
Telephone:`` -7'7: % �j20'ZFIV
Project Description:
City, ST, Zip: J A dag1 FJ M C,f 7 725 3
t�"'(� 1 V'i'i r,'( •
Telephone: -7776707--
o
State Lic. #:4-- o
�,7 .r
City Lic. #:
_
Designer:
Address: 7-7-6
City, ST, Zip:$—
Telephone: Z S�jp
Construction Type:Occupancy:
Project type (circle one): New Add'`n Alter Repair' - Demo
State Lic. #: p _
Name of Contact Person: L
Sq. Ft.:AMP
(�� #Stories: /'
# Units:
Telephone # of Contact Person: 5146 ?iQ Sb
Estimated Value of Project: Q�Q
APPLICANT: DO NOT WRITE BELOW THIS LINE
#
Submittal
Req'd
Rec°d
TRACKING.
PERMIT FEES
Plan Sets
p�
Plan Check submitted
Item
Amount
Structural Calcs.
d
Reviewed, ready, f corrections
0/1
Plan Check Deposit
Truss Calcs.
Called Contact PersonPlan
14-
Check Balance
Energy. Calcs.
Of
Plans picked up
Construction
Flood plain plan.
Plans resubmitted
Mechanical
Grading. plan
2"d Review, ready for corrections/issue
Electrical
Subcontactor List
Called Contact Person
Plumbing
.
Grant Deed
Plans picked up
S.M.I.
H.O.A. Approval
Plans resubmitted
Grading
IN HOUSE:-
''d Review, ready for corrections/issue
Developer Impact Fee
Planning Approval
Called Contact Person
A.I.P.P.
Pub. Wks. Appr
Date of permit issue +
School Fees77—
_
Total Permit Fees
/ v/ / Z. .V -.o . N f- ( /U1 ac oc .
I
Coachella Valley Unified School District
83-733 Avenue 55, Thermal, CA 92274
(760) 398-5909 — Fax (760) 398-1224
This Box For District Use Only
DEVELOPER FEES PAID
AREA:
AMOUNT
LEVEL ONE AMOUNT:
LEVEL TWO AMOUNT:
MMGATIONAMOUNr:
COMM4ND.AMOUNT:
DATE:
RECEIPT:
CHECK k:
INITIALS:
CERTIFICATE OF COMPLIANCE
(California Education Code 17620)
Project Name: Ken & Brenda Greenan (PGA West) Date: 10/21/09
Owner's Name: Ken an Brenda Greenan Phone No.
Project Address: 56-242 Pebble Beach, La Quinta, CA 92253
Project Description: Atrium Conversion to Living of Existing SFD
APN: 775-131-093 Tract #: Lot #'s: Unit 407
Type of Development: Residential ao Commercial Industrial
Total Square Feet of Building Area: .-J09 sq. ft.
Certification of Applicant/Owners: The person signing certifies that the above information is correct and makes this statement under
penalty of perjury and further represents that he/she is authorized to sign on behalf of the owner/developer.
Dated: 10/21/09
Signature:
ssssssssssssssssssssssssssssssssssssssss*ss*s**ss*sssssssssssssssssssss
SCHOOL DISTRICT'S REQUIREMENTS FOR THE ABOVE PROJECT HAVE BEEN OR WILL BE SATISFIED IN
ACCORDANCE WITH ONE OF THE FOLLOWING: (CIRCLE ONE)
Education Code
17620
Number of Sq.Ft.
Amount per Sq.Ft.
Amount Collected
Gov. Code Project
65995 Approval
109 sq. ft.
$ 0.00
$ 0.00
Building Permit Application Completed: Yes/No
By: Jamie T. Brown, Asst. Supt., Business Services
Certificate issued by: Leticia C. Torres, Facilities Analyst
Agreement Existing Not Subject to Fee
Prior to 1/1/87 Requirement
Note: Per AB -181 Any room addition or conversion to an
existing dwelling unit of 500 sq. ft or less is exempt from
developer fees.
Section 66020 of the Government Code asserted by Assembly Bill 3081, effective January 1;1997, requires that this District provide (1) a written notice to the
project appellant, at the time of payment of school fees, mitigation payment or other exactions ("Fees"), of the 90 -day period to protest the imposition of these
Fees and (2) the amount of the fees. Therefore, in accordance with section 66020 of the Government code and other applicable law, this Notice shall serve to
advise you that the 90 -day protest period in regard to such Fees or the validity thereof, commences with the payment of the fees or performance of any other
requirements as described in section 66020 of the Government code. Additionally, the amount of the fees imposed is as herein set forth, whether payable at this
time or in whole or in part prior to issuance of a Certificate of Occupancy. As in the latter, the 90 days starts on the date hereof. This Certificate of
Compliance is valid for thirty (30) days from the date of issuance. Extension will be granted only for good cause, as determined by the School District, and up
to three (3) such extensions may be granted.
MV:c/mydoes/devfees/certificate of compliance form tablesTO USE.doc 1/16/03 T
th4ei L�re4,ek
STRUCTURAL AND CIVIL ENGINEERING
DENISE R. POELTLER, INC.
77.725 Enfield Lane • Unit #130 • Palm Desert, California 92211
drpfly@aol.com
10 November 2009
Mr. Tom Hartung, Building Director
CITY OF LA QUINTA
Department of Building and Safety
78495 Calle Tampico
La Quinta, CA 92253
RE: GREENAN ATRIUM ENCLOSURE
Address: 56-242 Pebble Beach, Pete Dye Course
Subject: Structural Observation
Dear Mr. Hartung:
I have observed the structural elements and lateral load path for the structure referenced
above and found them in substantial conformance with the structural documents prepared
by my firm.
Respectfully submitted, �OPR R PSlO,yq•``
OFol
M: No. 33446
* Exp. 6 -30 -to -
Denise R. Poeltler s� It't0"0i
R.C.E. 33446 �- qT CIVI1-�n�`}I<!
W.O. 09-167
cc: Mr. Bob Edwards, BOB EDWARDS CONSTRUCTION, Inc.
PHONE (760) 772-4411 0 FAX (760) 772-4409
l
TITLE 24 REPORT
Title 24 Report for:
Mr. & Mrs. Ken Greenan
56-242 Pebble Beach
La Quinta, Ca 92253
Project Designer:
Robert A. Pitchford, Design & Drafting
77-622 Country Club Suite, O
Palm Desert, CA 92211
(760) 346-2856
Report Prepared.By:
Jon Scott
Scott Design & Title 24
77085 Michigan Dr' '
Palm Desert,, CA 92211 CITY OF LA QUINTA
(760) 200-4780 BUILDING & SAFETY DEPT.
APPROVED -
FOR CONSTRUCTION
DATE BY14-0
Job Number:
Date: OCT 21 2009
10/20/2009 By
he EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
uthorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC - www.energysoft.com. .
EnergyPro 4.4 by EnergySoft Job Number: User Number: 6712
TABLE OF CONTENTS
Cover Page
Table of Contents
Form CF -1 R Certificate of Compliance
Form MF -1 R Mandatory Measures Summary
HVAC System Heating and Cooling Loads Summary
Room Load Summary
Room Heating Peak Loads
Room Cooling Peak Loads
1
2
3
6
8
9
10
12
EnergyPro 4.4 by EnergySoft Job Number: User Number: 6712
Certificate Of Compliance : Residential (Part 1 of 3) CF -1 R
8�MrsKen -Greenan
Type Frame Area U -Fac. Cay.
1012-0120-9
Bnot- Wood- 2,Z -Q 049 R-19
tett Title
-Wall W--oad_ Fit _Ql 10_ _R-11
Date
Wall_ Word_ 300_ _0..1 i n R-11
R-00 115 C)Q
'"TR949_Lebble-Be.ach La -Quints
R_n n isn 9
Wall Wand- _6.65 0 110 _R-11
Project Address
\ALaIL- .tLood 62 -0110_ -11-R-0
Building Permit #
wall Wood_ -398_ _0_Li0_ -11
X0-0 9959Il
_&c_atMe_s.ion & Title_ 24
9.0
(760) 200-4780
_R-0..0_ 25 _99
-\ALall_ )N_oosi_ _3.3- 0110 -R--U
Documentation Author
Telephone Plan Check/Date
_Et1eL y2pp
C A_M.MateZoae 15 I Field Check/Date
Compliance Method
Climate Zone
TDV Standard
Proposed
Compliance
_ kBtu/sf- r) Design
Design
Margin
Space Heating 5.67
3.83
1.84
Space Cooling 166.76
142.89
23.86
Fans 22.49
19.20
3.28
Domestic Hot Water 10.79
10.79
0.00
Pumps 0.00
0.00
0.00
Totals 205.71
176.72
28.99
Percent better than Standard:
14.1%
BUILDING COMPLIES - NO HERS VERIFICATION REQUIRED
Building Type: (Jd Single Family
❑ Addition
Total Conditioned Floor Area:
2,381
ft2
❑ Multi Family
n Existing + Add/Alt
Existing Floor Area:
2,272
ft2
Building Front Orientation:
(NW) 295 deg
Raised Floor Area:
0
ft2
Fuel Type:
Natural Gas
Slab on Grade Area:
2,381
ft2
Fenestration:
Average Ceiling Height:
10.0
ft
Area: 366 ft2 Avg. U: 0.79
Number of Dwelling Units:
1.00
Ratio: 15.4% Avg. SHGC: 0.59
Number of Stories:
1
0UILDING ZONE INFORMATION
# of Thermostat
Vent
ne Name Floor Area Volume
Units Zone Type Type
Hgt.
Area
HVAC 1 R 2 Fxicting X381 93 RR10
x_00_ Conditioned- -Setback-
2
-nla
OPAQUE SURFACES Insulation Act.
Type Frame Area U -Fac. Cay.
Cont. Azm. Tilt
Bnot- Wood- 2,Z -Q 049 R-19
R-0 0 n 0
-Wall W--oad_ Fit _Ql 10_ _R-11
g -on 115_ 9Q
Wall_ Word_ 300_ _0..1 i n R-11
R-00 115 C)Q
Wall_ Wood- 2n _0 11n R-11
R_n n isn 9
Wall Wand- _6.65 0 110 _R-11
X0.0 905_ 90
\ALaIL- .tLood 62 -0110_ -11-R-0
Q_ -2952Q
wall Wood_ -398_ _0_Li0_ -11
X0-0 9959Il
Wall Wnnd 22 n lin R-11-R-Qn34.0_
9.0
\Qlall- Wood_ __Z6a3_ _0110_ R-11
_R-0..0_ 25 _99
-\ALall_ )N_oosi_ _3.3- 0110 -R--U
_R-0_0_ -25_ 90
B GL_ W od- 89 -O-.35- R_3n
-Wall Wood- 85 n 102 -R-13_
Gains Condition
Y / N Status JA IV Reference Location / Comments
Existing- .01-A4
Existing-aesldeace
Removed- 0g -A2
Existing_ 09-Q2
ExistmgJResidence
Existing RQsidenn-
Fxicting_ 09-A2
Existing -Residence
Fxicting 09-A2
Exis1bg3e.side.nce
Removed 09-A2
ExistinnRResidErice
Existing_ n9 -A2
Existiag-aesiden.ce
Existing_ 09-A2
Existiag-aesideoce
Existing 09-A2
ExistftJ3.e81dEIlCe
RemoxerL 0.9-A2
Existing_aesidence
New 02-A1n
Atdum
New n9 -A3
Atrium
EnergyPro 4.4 by EnergySoft User Number: 6712 Job Number: Page:3 of 14 1
Certificate Of Compliance : Residential (Part 2 of 3) CF -1 R
10/20/2009
Title Date
FENESTRATION SURFACES
True Cond. Location/
# Type Area U-Factorl SHGCz Azm. Tilt Stat. Glazinq Type Comments
1- Window Rear (SE _ 64.0n 790 116_A n sa
2
Window
Rear (SE)
18.5
0.790 116-A 0_59
3
Window
Rear (SE)
40.2
0.790 116-A 0.59
4
Window
Rear (SE)
96.0
0.790 116-A 0.59
5
Window
Rear (S)
7.5
0.790 116-A 0.59
6
Window
Rioht (SW)
20.0
0.790 116-A 0_59
Z
Window Right (SW)
20.0 x..79 116-A _0.59
8
Window
Right (SW)
20.0
0.790 116-A 0.59
6
Window
Right (SSW)
22.5 0_790 A 0.59
10_
Window Right(SW)
22.5 0.7991116-A 4.59
11
Window
Front (NW)
64.0
0.790 116-A 0_59
12
Window
Front (NW)
22.5
0.790 116-A 0_59
13
Windoxv
Front (NWS
24.5 0_790,16 059
14
Window
Front (NW,)
10.1
0.790 116-A 0_59
15
Window
Front (N)
10.0
0.790 116-A 0.59
16
Window
Left (NE)
7.2
0.790 116-A 0_59
17
Window
Left (NE)
48.0
0.790 116-A 0.59
18
Skylight
Front (W)
24.0
0.790 116-A 0_59
116_B
115_-9.0-Rem.oyedDuallAMA Tinted
-cistingBesidenee
116-B
115
90 Existing_Dual Metal Tinted
Existing
Residence
116-B
115
90 Existing Dual Metal Tinted
Existing
Residence
116-6
115
90 Existing Dual Metal Tinted
Existing
Residence
116-B
160
90 Existing Dual Metal Tinted
Existing
Residence
116-B
205
90 Existing Dual Metal Tinted
Existing
Residence
116-B
2005
90 Existing Dual Metal Tinted
Existing
Residence
116-8
205
90 Existing Dual Metal Tinted
Existing
Residence
116-B
205
90 Existing_Dual Metal Tinted
Existing
Residence
116-B
205
90 Existing Dual Metal Tinted
Existing
Residence
116-B
295
90 RemovedDual Metal Tinted
Existing
Residence
116-B
295
90 Existing Dual Metal Tinted
Existing
Residence
116-B.
_2.9r,
99- Exisling_DuaLMetaLIinted
-Existing Residence
116-B
295
90 Existing Dual Metal Tinted
Existing
Residence
116-B
340
90 Existing Dual Metal Tinted
Existing
Residence
116-B
25
90 Existing Dual Metal Tinted
Existing
Residence
_116B
25
90 RemovedDual Metal Tinted
Existing
Residence
116-B
270
0 New Dual Metal Tinted
Atrium
1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 1168.
INTERIOR AND EXTERIOR SHADING Window Overhang Left Fin Right Fin
#
Exterior Shade Type
SHGC Hgt. Wd. Len. Hgt. LExt. REA Dist. Len. Hgt. Dist. Len. Hgt.
1
Bug Screen
0.76
2
Bug Screen
0.76
3
Bug Screen
0.76
9
Bug Screen
0.76
Existing
Bug Screen
0.76
Bug Screen
0.76
7
Bug Screen
0.76
8
Bug Screen
0.76
9
Bug Screen
0.76
10
Bug Screen
0.76
Ti
Bug Screen
0.76
12
Bug Screen
0.76
13
Bug Screen
_
0.76
14
Bug Screen
0.76
15
Bug Screen
0.76
16
Bug Screen
_
0.76
17
Bug Screen
0.76
18
None
1.00
THERMAL MASS FOR HIGH MASS DESIGN
Area Thick. Heat Inside Condition Location/
Type (sf) (in.) Cap. Cond. R -Val. JA IV Reference Status Comments
PERIMETER LOSSES Insulation Condition Location/
Tvoe Length R -Val. Location JA IV Reference Status Comments
Slab Perimeter
182
None No Insulation
26-A1
Existing
Existing Residence
Slab Perimeter
80
None No Insulation
26-A1
Existing
Existing Residence
,mWab Perimeter
9
None No Insulation
26-A1
Existing
Atrium
Run Initiation Time: 10/20/09 15:51:56 Run Code: 1256079116
EnergyPro 4.4 by EnergySoft User Number: 6712 Job Number: Page:4 of 14
Certificate Of Compliance : Residential (Part 3 of 3) CF -1 R
r. & Mrs. Ken Greenan
ritle
HVAC SYSTEMS
10/20/2009
Date
Heating Minimum Cooling Minimum Condition Thermostat
Location Type Eff Type Eff Status Type
HVAC 1 & 2 Existing Central Furnace 78% AFUE Split Air Conditioner 10.0 SEER Existing Setback
HVAC DISTRIBUTION
Duct
Location Heatinq Coolinq Location
HVAC 1 & 2 Existing Ducted Ducted Attic
Hydronic Piping Pipe Pipe Insul.
System Name Length Diameter Thick.
Duct Condition Ducts
R -Value Status Tested?
4.2 Existing No
WATER HEATING SYSTEMS Rated
Tank
Energy
Tank Insul.
Water Heater # in Input
Cap.
Condition Factor
Standby R -Value
System Name Type Distribution Syst. (Btu/hr).
(gal)
Status or RE
Loss (%) Ext.
Standard Gas 50 gal or Less Small Gas No Pipe Insulation 1 40,000
50
Existing 0.57
n/a n/a
Multi -Family Central Water Heating Details
Hot Water Pump Hot Water Piping Length ft Add 1/2"
Control # HP Type In Plenum Outside Buried Insulation
REMARKS
COMPLIANCE STATEMENT
This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of
Regulations, and the administrative regulations to implement them.This certificate has been signed by the individual with overall design responsibility.
The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality,
and building envelope sealing require installer testing and certification and field verification by an approved HERS rater.
Designer or Owner (per Business & Professions Code)
Name:
Title/Firm: Robert A. Pitchford D n & Draftin
Address: 77-622 Co CI ite
Palm D
jifsert, 1
Telephone: 7
(signatur (dat
Enforcement Agency
Name:
Title/Firm:
Address:
Telephone:
lWignature) (date)
Documentation Author
Name: Jon Scott
Title/Firm: Scott Design & Title 24
Address: 77085 Michigan Dr.
Palm Desert, CA 92211
Telephone: 760 200-4780
_to
(signature) (date)
11
Mandatory Measures Summary: Residential (Page 1 of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance
• requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit
documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether
they are shown elsewhere in the documents or on this checklist only.
•
DESCRIPTION Check or initial applicable boxes or check NA if not applicable and included with the
permit application documentation.
N/A
DESIGNER
ENFORCE -
MENT
Building Envelope Measures
❑
❑X
❑
+§ 150(a): Minimum R-19 in wood ceiling insulation or equivalent LI -factor in metal frame ceiling.
❑
Q
❑
§ 150(b): Loose fill insulation manufacturer's labeled R -Value:
❑
❑
❑
+§ 150(c): Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not
❑
❑X
❑
apply to exterior mass walls).
❑
❑X
❑
•§ 150(d): Minimum R-13 raised floor insulation in framed floors or equivalent U -factor.
❑
❑
❑
§ 150(e): Installation of Fireplaces, Decorative Gas Appliances and Gas Logs.
❑
❑X
❑
1. Masonry and factory -built fireplaces have:
❑
❑X
❑
a. closable metal or glass door covering the entire opening of the firebox
❑
❑x
❑
b. outside air intake with damper and control, flue damper and control
❑
Q
❑
2. No continuous burning gas pilot lights allowed.
❑
❑X
❑
§ 150(f): Air retarding wrap installed to comply with §151 meets requirements specified in the ACM Residential Manual.
❑
❑
❑
§ 150(g): Vapor barriers mandatory in Climate Zones 14 and 16 only.
❑
❑
❑
§ 150(1): Slab edge insulation - water absorption rate for the insulation alone without facings no greater than 0.3%, water vapor
❑
❑
❑
permeance rate no greater than 2.0 perm/inch.
❑
❑
❑
§ 118: Insulation specified or installed meets insulation installation quality standards. Indicate type and include
❑
El
11CF-6R
Form:
❑
❑
❑
§ 116-17: Fenestration Products, Exterior Doors, and Infiltration/Exfiltration Controls.
1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage.
❑
❑X
❑
2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain
❑
❑
❑
Coefficient (SHGC), and infiltration certification.
❑
❑X
❑
3. Exterior doors and windows weatherstripped; all joints and penetrations caulked and sealed.
❑
❑X
❑
Space Conditioning, Water Heating and Plumbing System Measures
§ 110-13: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission.
❑
❑X
❑
§ 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE, SMACNA or ACCA.
❑
❑X
❑
§ 150(i): Setback thermostat on all applicable heating and/or cooling systems.
❑
❑X
❑
§ 1506): Water system pipe and tank insulation and cooling systems line insulation.
1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with insulation
❑
❑
❑
having an installed thermal resistance of R-12 or greater.
2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks have R-12 external
❑
❑
❑
insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value.
3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness:
1. First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire
❑
❑
❑
length of recirculating sections of hot water pipes shall be insulated to Table 150B.
2. Cooling system piping (suction, chilled water, or brine lines), piping insulated between heating source and
❑
❑
❑
indirect hot water tank shall be insulated to Table 150-B and Equation 150-A.
4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A.
❑
❑
❑
5. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance,
❑
❑
❑
and wind.
6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed
❑
❑
❑
entirely in conditioned space.
7. Solar water -healing systems/collectors are certified by the Solar Rating and Certification Corporation.
❑
❑
❑
EnergyPro 4.4 by EnergySoft User Number: 6712 Job Number:
Page:6 of 14
Mandatory Measures Summary: Residential (Page 2 of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance
• requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit
documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether
they are shown elsewhere in the documents or on this checklist only.
�J
DESCRIPTION Instructions: Check or initial applicable boxes when completed or check NIA if not ENFORCE -
applicable. N/A DESIGNER MENT
Space Conditioning, Water Heating and Plumbing System Measures: (continued)
§ 150(m): Ducts and Fans
1. All ducts and plenums installed, sealed and insulated to meet the requirements of the CMC Sections 601, 602, 603, 604, ❑ ❑ ❑
605, and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minumum installed level of
R-4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system
that meets the applicable requirements of UL 181, UL 181A, or UL 181 B or aerosol sealant that meets the requirements
of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh or
tape shall be used.
2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed ❑ ❑ ❑
sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support
platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions
in the cross-sectional area of the ducts.
3. Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive
❑
❑
❑
duct tapes unless such tape is used in combination with mastic and draw bands.
❑
❑
❑
❑
❑
❑
❑
4. Exhaust fan systems have back draft or automatic dampers.
❑
❑
❑
5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operating
❑
❑
❑
dampers.
❑
❑
❑
6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment
❑
❑
❑
maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water
❑
retardant and provides shielding from solar radiation that can cause degradation of the material.
❑ .
❑
❑
7. Flexible ducts cannot have porous inner cores.
§ 114: Pool and Spa Heating Systems and Equipment
1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the
heater, weatherproof operating instructions, no electric resistance heating and no pilot light.
2. System is installed with:
a. At least 36" of pipe between filter and heater for future solar heating.
b. Cover for outdoor pools or outdoor spas.
3. Pool system has directional inlets and a circulation pump time switch.
§ 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously
burning pilot light. (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr)
§ 118 (i): Cool Roof material meets specified criteria
Lighting Measures
§ 150(k)l: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table
150-C, and do not contain a medium screw base socket (E24/E26). Ballasts for lamps 13 Watts or greater are electric
and have an output frequency no less than 20 kHz.
§ 150(k)l: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C,
luminaire has factory installed HID ballast.
§ 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined
in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires,
provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires.
§ 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires.
OR are controlled by an occupant sensor(s) certfied to comply with Section 119(d).
§ 150(k)4: Permanently installed luminaires located other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms
shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are controlled
by an occupant sensor that complies with Section 119(d) that does not turn on automatically or have an always on option.
§ 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are
certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals.
§ 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the
same lot shall be high efficacy luminaires (not including lighting around swimming pools/water features or other Article 680
locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d).
§ 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147.
Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146.
§ 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more
dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section 119(d).
❑ ❑
❑ ❑
N
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑ .
❑
❑
❑
❑
❑
❑
❑
❑
JEnergyPro 4.4 by EnergySoft User Number: 6712 Job Number: Page:7 of 14
1HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY
PROJECT NAME DATE
Mr. & Mrs. Ken Greenan 10/20/2009
STEM NAME FLOOR AREA
HVAC 1 & 2 Existing 2,381
ENGINEERING CHECKS ISYSTEM LOAD
Number of Systems 1 2 COIL COOLING PEAK COIL HTG. PEAK
Heating System CFM Sensible Latent CFM I Sensible
Output per System
89,000
Total Room Loads
Return Vented Lighting
Return Air Ducts
Return Fan
Ventilation
Supply Fan
Supply Air Ducts
TOTAL SYSTEM LOAD
Total Output (Btuh)
178,000
Output (Btuh/sgft)
74.8
Cooling System
Output per System 46,500
Total Output (Btuh) 93,000
Total Output (Tons) 7.8
Total Output (Btuh/sgft) 39.1
Total Output (sgft/Ton) 307.2
Air System
CFM per System
1,550
Airflow (cfm)
3,100
Airflow (cfmisgft)
1.30
Airflow (cfm/Ton)
400.0
Outside Air (%)
0.0
2,320
44,362
759
841
44,798
0
8,917
6,417
0
0
0
0
0
0
0
0
0
8,917
6,417
PMENT SELECTION
62,199]6:7777;9 57 633
Existing 4 Ton
76,405
3,332
Total Adjusted System Output
(Adiusted for Peak Design Conditions)
76,405
3,332
178,000
178,000
Outside Air (cfm/sgft) 0.00 TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am
Note: values above given at ARI conditions
EATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak
26.0 of 68.1OF 68.1 OF 122.0 OF
0
Outside Airol
Supply Air Ducts
0 cfm 120.1 of
Supply Fan Heating Coil
3100 cfm ROOMS
68.1 of 70.0 of
Return Air Ducts
(COOLING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Coolina Peak) I
110.0 / 72.5 of 77.8 / 62.1 of 77.8 / 62.1oF 54.7 / 53.4 of
O Supply Air Ducts
Outside Air
0 cfm Supply Fan Cooling Coil 57.4 / 54.5 of
3100 cfm 45.1% R.H. ROOMS
77.8/62.1 of 75.1 61.2 OF
Return Air DuctsOF I
I
EnergyPro 4.4 by EnergySoft User Number: 6712 Job Number: Page:8 of 14
4
r
L
4
ROOM LOAD SUMMARY
PROJECT NAME
Mr. & Mrs. Ken Greenan
DATE
10/20/2009
STEM NAME
HVAC 1 & 2 Existing
FLOOR AREA
2,381
ROOM LOAD SUMMARY
ROOM COOLING PEAK
COIL COOLING PEAK
COIL HTG. PEAK
ZONE NAME
ROOM NAME
Mult.
CFM
SENSIBLE
LATENT
CFM
SENSIBLE
LATENT
CFM
SENSIBLE
Existinq Residence
Existing Residence
1
2,047
38,376
9
2,047
38,376
9
804
42,819
Atrium
Atrium
1
273
5,986
750
273
5,986
750
37
1,978
PAGE TOTAL 1 2,320 44,362 759 841 44,798
TOTAL 1 2,320 44,362 759 841 44,798
EnergyPro 4.4 by EnergySoft User Number: 6712 Job Number: Page:9 of 14
ROOM HEATING PEAK LOADS
ro.ect Title Date
r. & Mrs. Ken Greenan 10/20/2009
Room Information Desi n Conditions
Room Name Existing Residence Time of Peak Jan 12 am
Floor Area 2,272 Outdoor Dry Bulb Temperature 26°F
Indoor Dry Bulb Temperature 70°F
Conduction Area U -Value pT of Btu/hr
lot
2,272.0
X
x
x
X
x
X
X
X
x
x
x
x
X
X
x
X
x
X
X
X
x
x
x
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0.0490
X
X
x
x
x
X
x
X
X
X
X
x
x
X
X
x
x
X
X
X
x
X
x
X
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
44
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
4,898
300.3
0.1100
44
1,453
18.5
0.7900
44
643
40.2
0.7900
44
1,397
96.0
0.7900
44
3,337
19.5
0.1100
44
94
7.5
0.7900
44
261
665.0
0.1100
44
3,219
20.0
0,7900
44
695
20.0
0.7900
44
695
20.0
0.7900
44=
g
22.5
0.7900
44
782
22.5
0.7900
44
782
397.9
0.1100
44=
1,926
22.5
0.7900
44=782
24.5
0.7900
44
852
10.1
Q
44
5
22.0
0.1100
44
1
10.0
0.7900
44
348
762.8
0.1100
44
3,692
7.2
0.7900
44=
5.0
5,846
perimeter = 182.0
0.7300
44
perimeter = 80.0
0.7300
44
2,570
Items shown with an asterisk ('f) denote conduction through an interior surface to another room.
Infiltration: 1 1.00 x 1.064 x 2 272 x 10.00 x 0.403 / 6] x
chedule Air Sensible Area Ceiling Height ACH
Fraction
Page Total: 1 35,6751
44 = 7 144
ICST
TOTAL HOURLY HEAT LOSS FOR ROOM 11 42,819
EnergyPro 4.4 by EnergySoft User Number: 6712 Job Number: Page: 10 of 14
ROOM HEATING PEAK LOADS I
roject Title Date
r. & Mrs. Ken Greenan 10/20/2009
Room Information Desi n Conditions
Room Name Atrium Time of Peak Jan 12 am
Floor Area 109 Outdoor Dry Bulb Temperature 26°F
Indoor Dry Bulb Temperature 70°F
Conduction Area U -Value QT OF Btu/hr
Slab -On -G
85.0
X
X
X
X
x
X
X
x
X
X
x
X
X
X
X
X
X
x
x
X
X
X
X
x
X
X
x
x
x
X
X
X
X
X
X
X
X
X
X
0.0350
X
X
x
x
X
X
X
x
X
X
X
x
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
x
X
X
X
X
X
44
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
131
24.0
0.7900
44
834
85.0
0.1020
44
381
perimeter = 9.0
0.7300
44
289
Items shown with an asterisk (") denote conduction through an interior surtace to another room. Page Total: I 1,636
Infiltration: rF _100x 1.064 X 109 X 10.00 X 0.403 / 60] x 44 = 343
`schedule Air Sensible Area Ceiling Height ACH ILT
Fraction
TOTAL HOURLY HEAT LOSS FOR ROOM 1,978
EnergyPro 4.4 by EnergySoft User Number: 6712 Job Number: Page: 11 of 14
RESIDENTIAL- ROOM COOLING LOAD SUMMARY
roject Title Date
r. & Mrs. Ken Greenan 10/20/2009
Room Information Desi n Conditions
Room Name: Existing Residence Outdoor Dry Bulb Temperature: ill 0F
Floor Area: 2,272 sf Outdoor Web Bulb Temperature: 730F
Indoor Dry Bulb Temperature: 75 of Outdoor Daily Range: 340F
Opaque Surfaces Orientation Area U -Factor CLTD 1 Btu/hr
•
•
1991
104*2
Default Wall 1978 to 1991
Default Wall 1978 to 1991
N
2,272.0
X
X
X
X
X
X
X
x
x
X
X
X
0.0490
X
X
X
X
X
X
x
X
x
X
x
x
56.0
=
=
=
=
=
=
=
=
=
=
=
=
SE
300.3
0.1100
31.9
S
19.5
0.1100
28.2
SW
665.0
0.1100
28.8
NW
397.9
0.1100
31.5
N
22.0
0.1100
27.8
(NE)
762.8
0.1100
26.3
0.0
37.7
20.0
45.3
SW
0.0
37.7
20.0
45.3
SW
0.0
37.7
20.0
45.3
SW
0.0
37.7
22.5
I
SW
Items shown with an asterisk (') denote conduction through an interior surface to another room.
1. Cooling Load Temperature Difference (CLTD)
Fenestration
Window Existing
Window Existing
Window Existing
Window Existing
Window Existing
Window Existing
Window Existing
Window Existing
Window Existing
Window Existing
rage 1 otal
Orientation
Shaded
Area
X
X
X
x
x
x
x
x
x
x
X
GLF
+
+ ;
+
+
+
+
+
+
+
+
+
Unshaded
Area
x
x
X
x
X
x
X
X
X
x
X
Page
GLF
=
=
=
=
=
=
=
=
=
SE
0.0
37.7
18.5
53.3
SE
0.0
37.7
40.2
53.3
SE
0.0
37.7
96.0
53.3
S
0.0
37.7
7.5
43.8
SW
0.0
37.7
20.0
45.3
SW
0.0
37.7
20.0
45.3
SW
0.0
37.7
20.0
45.3
SW
0.0
37.7
22.5
45.3
SW
0.0
37.7
22.5
45.3
NW
0.0
37.7
22.5
Total
6,234
1,053
61
2,105
1,377
67
2,210
13,1071
Btu/hr
Internal Gain Btu/hr
Occupants 2 Occupants X 230 Btuh/OCC. _ 460
E ui ment 1 Dwelling Units X 1,6001 Btuh 1,600
Infiltration: 1.064 X 0.88 X 160.31 X = 5428
Air Sensible CFM ELA DT
TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 38,376
Latent Gain Btu/hr
Occupants 2Occupants x 200 Btuh/occ. = 400
Infiltration: 4 771 X 0.88 X 160.31 X 0.00058 = 391
Air Latent CFM ELA pW
TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 9
EnergyPro 4.4 by EnergySoft User Number: 6712 Job Number: Page: 12 of 14
RESIDENTIAL ROOM COOLING LOAD SUMMARY
roject Title
r. & Mrs. Ken Greenan -rate/20/2009
Room Information Desi n Conditions
Room Name: Existing Residence Outdoor Dry Bulb Temperature: 111°F
Floor Area: 2,272 sf Outdoor Web Bulb Temperature: 730F
Indoor Dry Bulb Temperature: 75 of Outdoor Daily Range: 340F
•
•
vNayuc oui ra;.ca
Orientation Area
Items shown with an asterisk (') denote conduction through an interior surface to another room.
1. Cooling Load Temperature Difference (CLTD)
Fenestration
ndow
U -Factor CLTD 1 Btu/hr
X
X
X
X
X
x
X
x
X
x
X
x
x
x
X
X
X
X
X
X
X
X
X
X
x
X
X
x
x
x
X
x
x
x
x
=
=
=
=
=
=
=
=
=
=
=
+
+
+
+
+
+
+
+
+
+
+
Unshaded
Area
x
x
x
x
x
x
x
X
x
x
x
Page
GLF
=
=
=
=
=
=
=
=
=
=
=
Btu/hr
NW
0.0
37.7
24.5
63.8
1,563
NW
0.0
37.7
10.1
63.8
645
N
0.0
37.7
10.0
46.1
461
NE
0.0
37.7
7.2
48.2
- --
Page Total 0
Orientation
Shaded
Area
x
X
X
x
x
x
X
x
x
x
x
GLF
+
+
+
+
+
+
+
+
+
+
+
Unshaded
Area
x
x
x
x
x
x
x
X
x
x
x
Page
GLF
=
=
=
=
=
=
=
=
=
=
=
Btu/hr
NW
0.0
37.7
24.5
63.8
1,563
NW
0.0
37.7
10.1
63.8
645
N
0.0
37.7
10.0
46.1
461
NE
0.0
37.7
7.2
48.2
347
Total
3,0171
Internal Gain Btu/hr
Occu ants 2
Occup
ants x 230 Btuh/occ. = 460
p p
E uipment 1 Dwelling Units X 1,6001 Btuh = 1,6001
Infiltration: 1.064 x 0.88 x 160.31 x = 5428
Air Sensible CFM ELA 4sT
TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 38,376
Latent Gain _ Btu/hr
Occupants �2 Occupants x 1 200 Btuh/OCC. = 400
Infiltration: 4 771 x 0.88 x 160.31 x 0.00058 = 391
Air Latent CFM ELA pW
TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 9
EnergyPro 4.4 by EnergySoft User Number: 6712 Job Number: Page: 13 of 14
RESIDENTIAL ROOM COOLING LOAD SUMMARY
roject Title Date
1111mr. & Mrs. Ken Greenan 110/20/2009
Room Information Desi n Conditions
Room Name: Atrium Outdoor Dry Bulb Temperature: 111OF
Floor Area: 109 sf Outdoor Web Bulb Temperature: 730F
Indoor Dry Bulb Temperature: 78'FOutdoor Daily Range: 340F
I*
0
Opaque Surfaces
R-30 Roof(13.30.2x12.16)
R-13 Wall
Orientation Area U -Factor CLTD 1
W 85.0 X 0.0350 X 56.0 =
NE 85.0 X 0.1020 X 26.3 =
x x =
x x =
x x =
x x =
x x =
x x =
x x =
x x =
x x =
x x =
Items shown with an asterisk (') denote conduction through an interior surface to another room.
1. Cooling Load Temperature Difference (CLTD)
Fenestration
rage I oial
Btu/hr
167
228
395
Shaded Unshaded
Orientation Area GLF Area GLF Btu/hr
(Sky) 0.0 x 38.4 + 24.0 x 118.3 = 2,840
x + x =
x + x =
x + x =
X + x =
x + X =
x + x =
x + x =
X + X —
x + x =
x + x =
Page Total 2 sao
Internal Gain Btu/hr
Occu ants B4 Occupants X 230 Btuh/OCC. = 920
E ui ment 1 DwellingUnits X 1,6001 Btuh 1 1,6001
Infiltration: 1.o6a X 0.86 x 7.69 X
Air Sensible CFM ELA OT
TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 5,986
Latent Gain Btu/hr
Occupants F4 Occupants X 1 200 Btuh/oCC. = 800
Infiltration: 4 771 x 0.86 x 7.69 x 0.00158 = -50
Air Latent CFM ELA pW
TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 750
EnergyPro 4.4 by EnergySoft User Number: 6712 Job Number: Page: 14 of 14