Loading...
BRES2017-0112J 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 T,iht 4 4v Qum& DESIGN & DEVELOPMENT DEPARTMENT Application Number: BRES2017-0112 Property Address: 57720 BALLYBUNION APN: 762360005 Application Description: MORGAN / ENCLOSE EXISITNG 126 SQ Property Zoning: workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith Application Valuation: $10,180.80N Applicant: CADD WORKS INC �� ' cant: 31475 CALLE HELENE V �` THOUSAND PALMS, CA 92276 WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, BUILDING PERMIT of PA40 ✓C�v Q LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, and my License is in full force and effect. License Class: _ License No.: 912777 (Date: .— ctor: VOICE (760) 777-7125 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date; 6/1/2017 Owner: KANJI KIRIMA s3 25 CHENEY STIN, CA 92253 Contractor: HIGUERA CONSTRUCTION 82267 BLISS AVENUE INDIO, CA 92201 (760)469-6074 LIc. No.: 912777 WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self-irisure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: OWNER -BUILDER DECLARATION Carrier: EXEMPT Policy Number: I hereby affirm under penalty of perjury that I am exempt from the Contractor's State I certify that in the performance of the work for which this permit is issued, I License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any shall not employ any person in any manner so as to become subject to the workers' city or county that requires a permit to construct, alter, improve, demolish, or repair compensation laws of California, and agree that, if I should become subject to the any structure, prior to its issuance, also requires the applicant for the permit to file a workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith signed statement that he or she is licensed pursuant to the provisions of the comply with those provisions. Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the �� ' cant: basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a V �` permit subjects the applicant to a civil penalty of not more than five hundred dollars WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, ($500).: AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO (_j I, as owner of the property, or my employees with wages as their sole ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF compensation, will do the work, and the structure is not intended or offered for sale. COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not INTEREST, AND ATTORNEY'S FEES. apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements APPLICANT ACKNOWLEDGEMENT are not intended or offered for sale. If, however, the building or improvement is sold IMPORTANT: Application is hereby made to the Building Official for a permit subject to within one year of completion, the owner -builder will have the burden of proving that the conditions and restrictions set forth on this application. he or she did not build or improve for the purpose of sale.). 1. Each person upon whose behalf this application is made, each person at whose ' (� I, as owner of the property, am exclusively contracting with licensed contractors request and for whose benefit work is performed under or pursuant to any permit ' to construct the project. (Sec. 7044, Business and Professions Code: The Contractors' issued as a result of this application , the owner, and the applicant, each agrees to, and State License Law does not apply to an owner of property who builds or improves shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and thereon, and who contracts for the projects with a contractor(s) licensed pursuant to employees for any act or omission related to the work being performed under or the Contractors' State License Law.). following issuance of this permit. )I am exempt under Sec. . B.&P.C. for this reason 2. Any permit issued as a result of this application becomes null and void if work is not'commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: Lender's Add I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above-mentioned property for inspection purposes.. 0 -------- D ature (Applicant or Agent) Date: 6/1/2017 Application Number: BRES2017-0112 Owner: Property Address: 57720 BALLYBUNION KANJI KIRIMA APN:• 762360005 2425 CHENEY Application Description: MORGAN./ ENCLOSE EXISITNG 126 SQ FT PATIO TUSTIN, CA 92253 Property Zoning: Application Valuation: $10,180.80 Applicant: Contractor: CADD WORKS INC HIGUERA CONSTRUCTION 31475 CALLE HELENE 82267 BLISS AVENUE THOUSAND PALMS, CA 92276 INDIO, CA 92201 (760)469-6074 Llc. No.: 912777 Detail: ENCLOSE EXISITNG 126 SQ FT PATIO. CONVERT PATIO TO SITTING AREA. PER 2016 CRC FINANCIAL INFORMATION DESCRIPTION . ACCOUNT QTY, AMOUNT BSAS SB1473 FEE 101-0000-20306 0 $1.00 Total Paid for BUILDING STANDARDS ADMINISTRATION BSA: $1.00 DESCRIPTION ACCOUNT QTY AMOUNT RESIDENTIAL, FIRST 1,000SF 101-0000-42403 0 $152.00 DESCRIPTION ACCOUNT QTY AMOUNT RESIDENTIAL, FIRST 1,000SF, PC 101-0000-42600 0 $50.16 Total Paid for ELECTRICAL - NEW -CONSTRUCTION: $202.16 DESCRIPTION ACCOUNT QTY AMOUNT REMODEL, EA ADDITIONAL 500 SF 101-0000-42400 0 $22.80 DESCRIPTION ACCOUNT QTY AMOUNT REMODEL, EA ADDITIONAL 500 SF PC 101-0000-42600 0 $18.24 DESCRIPTION ACCOUNT QTY AMOUNT REMODEL, FIRST 100 SF 101-0000-42400 0 $51.68 DESCRIPTION' ACCOUNT, QTY AMOUNT REMODEL, FIRST 500 SF PC 101-000042600 10 $141.36 Total Paid for REMODEL: $234.08 DESCRIPTION ACCOUNT QTY AMOUNT $MI - RESIDENTIAL .101-0000-20308 • 0 $1.32 Total Paid for STRONG MOTION INSTRUMENTATION SMI: $1.32 DESCRIPTION ACCOUNT QTY AMOUNT TECHNOLOGY ENHANCEMENT FEE 502-0000-43611 0 $5.00 Total Paid for TECHNOLOGY ENHANCEMENT FEE: $5.00 I Permit #{ SPgT,�2oI `t'— 003E Project_ Address:, -3.10 64 LL Qty' of U Q uin to r Building 8£ Safety Division 78-495 Calle Tampico La Quinta, CA 92253 - (760) 777-7012' ' Building Permit Application and Tracking Sheet VI 10 N�Owller s-Name?W/c N A. P. Numbers"` : '- Address: Legal Description: City;.ST Zip: --Contracto7 W51hGo —Tele fi � .r. Address.-\ j' C Fk l.' t H G0E 0Project Descrripffon< 6 S h . ho �nC- aTe P b U 7 3 �Sfate I ic. # 1 G r✓ • City Lic'. #;L/ _ i Arch., Engr., Designer: PR Address: rK 2 4 2017 City, ST, Zip: e: Telephone:hon State Lic _ i. CITY OF LA QUINTA ane : Construction Type: Occupancy: d d n Alter Repairair DemoJtYPe circle one)New A Name of Contact Perso! n:7 ' Sq. Ft.: # Stories: # Units: Telephone of Contact Person: —7 0 ' — ( �Estimated.Value of Project: O U APPLICANT: DO NOT WRITE BELOW THIS LINE # Submittal Req'd Rcc'd TRACKING PERMIT FEES Plan Sets Plan Check submitted Item • Amount'. Structural Calcs. Reviewed, ready for corrections Plan Check Deposit Truss Calcs.. Called Contact Person Plan Check Balance. Title 24 Calcs. Plans picked up Construction ' Flood plain plan Plans resubmitted Mechanical Grading plan 2°" Review, ready for corrcctions/issue Electrical . Subcontactor List Called Contact Person Plumbing Grant Deed . Plans picked up S.M.I. EL II.O.A. Approval Plans resubmitted Grading IN IiOUSE:- Jrd Review, ready for corrcctions/issue Developer Impact Fee Planning Approval Called Contact Person A.I.P.P. Pub. Wks. Appr Dale of permit issue School Fees, l Total Permit Fees r - e - Notice; of Architectural Review .May 5:, 20 17 RE1I VE D MAY 3 12017 Mark & Shelley 'M-organ 1910 Cathay Way . I CITY OF LA QUINTA Sacramento, CA. 0864, COMMUNITY DEVELOPMENT ppipion,�577,20;RAll Unidn,(SuhiniftSBX) R64. AfthitoctUril.A 41' �yb 'Dear Mr. & Mrs'. Morgan;. The Architectural-: Revi ew Committee has reviewed your app5ddilon. to enclose a portion of. the rear covered patio at your residence. am. :' leased to� inform you that the Committee has approved y. p our application as, siuknuitted with the condition 'that you submit final:stamped plans prior. to :commencing improvements. If any changes are made by the City you will.need submit a summary of changes, to the Architectural Review. Qomftuii tt'ee.p*n*or to commencement. Please note that the Architectural -Guidelines -state the following: Rowing: Section 7.7, (a) Stockpiling of W - Materials. Mat'al d li ' djo:or. gerieratedbywoikon.a pa)Aicular Lot should be.neatl stockpiledon qp s�. _,enver.e. such-. Lot and shall, be incorporated :into the. work of Improvements ordiscarded/t moved. within a reasonable time. '.Where. possible. such 'materials shall be:sctcened from view of thepdblic and neighboring: properties.*,: Section 7.8. DiSD.osal.of Debris, Any debns.generated.from -aj ob­tq must be ... 41 removed from the., site,. No - material may , epacc in or=ar the street,. Common Area, neighboring Lots or any other portion of the -property c Declaration Supplemental De6larati6ns.: py.e.r.ed by the De If a portable restroom. is needed, notify the Association as the location for the:restroom wilt need:'to be: determined-bytheManagen. Portablerestrooms:must be''tan:in -color. Golf Course Property Access — A 0 p ppr valpf architectural change plans by the Architectural .Committee does not include, any riglit.ofaccess by.Owner's contractor or subcontractor through golf course property. To request permission to access Lot through golf course property the Owner must:contact golf course management at PGA WEST at. 760-895-8064 regardipg,a. temporary access license. Access without written pernilssion,could be deenjed criminal trespass. Enclosed is an Exhibit C — the Compliance Review Request form. Please complete this. form -after the work is completed and: return . 11. .6r.fax to the address below so the completed .project can be .1 't : b y ma inspected. qsvected. The Management Trust — DesertDivision 39755' Berkey Drive; Suite: &.Palm Desert,, CA 92211 .Phone*. (760) -776-5100 Fax: (769) __176-5.111 mmmLpgqwesffqLr�wa com If. you 'have-: anye . s qp tions, :please :00tit-Att KAri. Martin. at 760495-04-5 r by email at Sincer.6lyll., F&Ihe A rchiledur .gl Copipfitleo PGA WEST-Fidk Fairways Association ...�Lql.-. Assie: Gertz,: Alvl, CA General Manager The Mahagdffi ntTrust,. -rt, e e.,s,e Division Lot.-File AvoldtocwAt Committee: BUILDING ENERGY ANALYSIS REPORT I PROJECT: Residence Addition 57720 Ballybunion La Quinta, CA 92253 Project Designer: CADDworks, inc. 31475 Calle Helene Thousand Palms, CA 912 (760) 272-5183 4 CITY OF LA QUINTA BUILDING & SAFETY DEPT. APPROVED FOR CONSTRUCTinN Report Prepared b Ricardo Aguilar DATE CADD Works Inc. 31475 Calle Helene Thousand Palms, CA 92276 (760) 272-5183 Job Number: 57720 Date: 4/24/2017 t-7!57. 5r, RECEIVED APR 2 4 2017 CITY OF LA QUINTA COMMUNITY DEVELOPMENT The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2016 Building Energy Efficiency Standards. This program developed by EnergySoft Software — www.energysoft.com. I TABLE OF CONTENTS I Cover Page Table of Contents Form CF -1 R -ADD -02-E Certificate of Compliance Form MF -1 R Mandatory Measures Summary IEnergyPro 7.1 by EnergySoft Job Number: ID: 57720 User Number: 5999 1 2 3 12 Prescriptive Residential Additions 300 Ft2 or Less, or Additions. That Do Not Require HERS Field Verification CEC CFIR ADD -02 E (Revised 04/16) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE CF1R-ADD-02-E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 1 of 9) Project Name: Residence Addition I Date Prepared: 4/24/2017 This compliance document is only applicable to additions 300 ft or less, or additions that do not require HERS field verification for compliance. When HERS verification is required, a CFIR-ADD-01 shall first be registered with a HERS Provider Data Registry. Alterations to Space Conditioning Systems that are exempt from HERS verification requirements may use the CFIR-ADD-02 and CF2R- ADD -02 Compliance Documents. Possible exemptions from duct leakage testing include: less than 40 ft of ducts were added or replaced; or the existing duct system was insulated with asbestos; or the existing duct system was previously tested and passed by a . HERS Rater. If space conditioning systems are altered and are not exempt from HERS verification, then a CFIR-ADD-01 must be completed and registered with a HERS Provider Data Registry. Additions or alterations that utilize close Cell Spray Polyurethane Foam (ccSPF) with a density of 1.5 to less than 2.5 pounds per cubic foot having an R -value other than 5.8 per inch, or Open Cell Spray Polyurethane Foam (ocSPF) with a density of 0.4 to less than 1.5 pounds per cubic foot having an R -value of 3.6 per inch, shall complete and register a CFIR ADD -01 with a HERS Provider Data Registry. If more than one person has responsibility for installation of the items on this certificate, each person shall prepare and sign a certificate applicable to the portion of construction for which they are responsible. Alternatively, the person with chief responsibility for construction shall prepare and sign this certificate for the entire construction. All applicable Mandatory Measures shall be met. Temporary labels shall not be removed before verification by the building inspector. A. General Information 01 Project Name: Residence Addition 02 Date Prepared: 4/24/2017 03 Project Location: 57720 Ballybunion 04 Building Front Orientation (deg): (SE) 135 deg 05 CA City: La Quinta 06 Number of Dwelling Units with Additions: 1 07 Zip Code: 92253 08 Fuel Type: Natural Gas 09 Climate Zone: 15 10 Total Conditioned Floor Area (ft) (Addition): 126.0 11 Building Type: Single Family 12 Slab Area (ft): 126 13 Project Scope: Addition: CFA = 126.0 sqft CA Building Energy Efficiency Standards - 2016 Residential Compliance April 2016 RrescriDtive Residential Additions 300 Ft2 or Less, or Additions That Do Not Require HERS Field Verification CEC-CFIR-ADD-02-E Revised 04/16 CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE CF1R-ADD-02-E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 2 of 9) Project Name: Residence Addition Date Prepared 4/24/2017 B. Opaque Surface Details — Framed (Section 150.2(a)) 01 02 03 04 05 06 07 08 09 10 11 Tag/ID Assembly Type Frame Type Frame Depth (inches) Frame Spacing (inches) Proposed Required Comments Cavity R -value Continuous Insulation R -value U -Factor Appendix JA4 Reference U -Factor Table Cell 1 Wall Wood 2x6 @ 16 in. O.C. 21 0.0 0.069 4.3. 1 -A6 0.051 R-21 Wall 2 Roof Wood 2x4 @ 24 in. O.C. 38 0.0 0.025 4.2. -A21 0.043 R-38 Roof Attic Tile 3 Wall Wood 2x6 @ 16 in. O.C. 21 0.0 0.069 4.3.1-A6 0.069_ R-21 Wall CA Building Energy Efficiency Standards - 2016 Residential Compliance April 2016 Prescriptive Residential Additions 300 Ft2 or Less, or Additions That Do Not Require HERS Field Verification CEC CF1R ADD -02-E (Revised 04/16) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE CF1R-ADD-02-E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 3 of 9) Project Name: Residence Addition Date Prepared: 4/24/2017 C. Opaque Surface Details — Non -framed (Section 150.1(c)1) 01 02 03 04 05 06 07 08 09 10 11 Tag/ID Assembly Type Assembly Materials Thickness (inches) Proposed Required Comments Core Insulation R -value Continuous Insulation R -value U -Factor Appendix 1A4 Reference U -Factor from Package A Table Cell R -value U -factor R -value U -factor Table Cell R -value U -factor R -value U -factor D. Opaque Surface Details — Mass Walls (Section 150.1(c)1) 01 02 03 04 05 06 07 08 1 09 10 11 Tag/ID Walls Above Grade Mass Type Mass Thickness (inches) Furring Strip Thickness (inches) Proposed Required Interior Insulation Exterior Insulation Appendix 1A4 Reference Interior Insulation Exterior Insulation R -value U -factor R -value U -factor Table Cell R -value U -factor R -value U -factor CA Building Energy Efficiency Standards - 2016 Residential Compliance April 2016 Prescriptive Residential Additions 300 Ft2 or Less, or Additions That Do Not Require HERS Field Verification CEC-CFIR-ADD-02-E Revised 04/16 CALIFORNIA ENERGY COMMISSION — CERTIFICATE OF COMPLIANCE CFIR-ADD-02-E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 4 of 9) Project Name: Residence Addition Date Prepared: 4/24/2017 E. Slab Insulation (Table 150.1-A) 01 01 02 03 04 05 06 Floor Type Proposed Required Comments Insulation R -value A radiant barrier is required (for Climate Zones 2-15) • Radiant barriers shall meet specific eligibility and installation criteria to receive energy credit for compliance with the Building Energy Efficiency Standards for low-rise residential buildings. Refer to RA4.2.1 • The emittance of the radiant barrier shall be less than or equal to 0.05 as tested in accordance with ASTM C1371 or ASTM E408. • For Prescriptive Compliance the attic shall be ventilated to provide a minimum free ventilation area of not less than one square foot of vent area for each 300 ft2 of attic floor area with no less than 30 percent upper vents. Ridge vents or gable end vents are recommended to achieve the best performance. The material should be cut to allow for full airflow to the venting. Insulation U -factor Insulation R -value Insulation U -factor Unheated Slab -on -Grade 0 0.730 Note:. • Heated slab floors require mandatory slab insulation (see Table 110.8-A). F. Radiant Barrier (Section 150.1(c)2) 01 02 Radiant Barrier installed below the roof deck and on all gable end walls Comments All New Roof areas with Attics Radiant Barrier required in this Climate Zone A radiant barrier is required (for Climate Zones 2-15) • Radiant barriers shall meet specific eligibility and installation criteria to receive energy credit for compliance with the Building Energy Efficiency Standards for low-rise residential buildings. Refer to RA4.2.1 • The emittance of the radiant barrier shall be less than or equal to 0.05 as tested in accordance with ASTM C1371 or ASTM E408. • For Prescriptive Compliance the attic shall be ventilated to provide a minimum free ventilation area of not less than one square foot of vent area for each 300 ft2 of attic floor area with no less than 30 percent upper vents. Ridge vents or gable end vents are recommended to achieve the best performance. The material should be cut to allow for full airflow to the venting. CA Building Energy Efficiency Standards - 2016 Residential Compliance April 2016 Prescriptive Residential Additions 300 Ft2 or Less, or Additions That Do Not Require HERS Field Verification CEC-CHR-ADD-02-E (Revised'04/16) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE CF111-ADD-02-E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 5 of 9) Project Name: Residence Addition Date Prepared: 4/24/2017 1. G. Roofing Products (Cool Roof) (Section 150.1(c)11) 01 02 03 04 05 06 07 08 09 10 11 12 Mass Roof 25lb/ft2 or Greater Roof Pitch Method of Compliance Product Type CRRC Product ID Number Proposed Required Initial Solar Reflectance Aged Solar Reflectance Thermal Emittance SRI (Optional) Aged Solar Reflectance Thermal Emittance SRI (Optional) Orientations ft2 Area Only ftZ Maximum Maximum Maximum Maximum The Greater The Greater Addition Allowed Allowed Allowed Allowed Comments Type ft2 U -factor U -factor SHGC SHGC Maximum Maximum Calculated Maximum Calculated Maximum (Windows) (Skylights) (Windows) (Skylights) Calculated Calculated based on Allowed ft based on Allowed ft Allowed % Allowed % 126.0 37.8 75.0 Notes: • Any roof area covered by building integrated photovoltaic panels and solar thermal panels are exempt from the above Cool Roof requirements. • Liquid field applied coatings must comply with installation criteria from section 110.8(i)4. H. Fenestration/Glazing Allowed Areas and Efficiencies (Section 150.2(a)1) 01 02 1 03 04 1 05 06 07 08 09 10 Maximum Allowed Maximum Allowed Fenestration Area for All West -Facing Fenestration Orientations ft2 Area Only ftZ Maximum Maximum Maximum Maximum The Greater The Greater Addition Allowed Allowed Allowed Allowed Comments Type ft2 U -factor U -factor SHGC SHGC Maximum Maximum Calculated Maximum Calculated Maximum (Windows) (Skylights) (Windows) (Skylights) Calculated Calculated based on Allowed ft based on Allowed ft Allowed % Allowed % 126.0 37.8 75.0 60.0 60.0 0.320 0.320 0.250 0.250 CA Building Energy Efficiency Standards - 2016 Residential Compliance April 2016 Prescriptive Residential Additions 300 Ft2 or Less, or Additions That Do Not Require HERS Field Verification CEC-CF1 R -ADD -02-E (Revised 04/16) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE CF1R-ADD-02-E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 6 of 9) Project Name: Residence Addition I Date Prepared: 4/24/2017 I. Fenestration Proposed Areas and Efficiencies Note: If meeting Exception 1 to 150.1(c)3A, Installing15 3ft2 glass in door, it is assumed to meet the minimum required U -factor (0.32) & SHGC (0.25). If meeting Exception 1 to 150.1(c)3A, Installing <_ 3ft2 tubular skylight, it is assumed to meet the minimum required U -factor (0.55) & SHGC (0.30). 01 02 03 04 05 06 07 08 09 10 11 12 13 14 Tag/I D Fenestration Type Frame Type Dynamic Glazing Orientation N, S, W, E or Roof Number of Panes Proposed Fenestration Area ft Proposed West Facing Fenestration Area ft Proposed U -factor Source Proposed SHGC Source Exterior Shading Device Combined SHGC from CF1R-ENV-03 1 New Non -Metal (SE) 2 192.0 0.280 NFRC 0.25 NFRC n/a 0.25 2 New Non -Metal (NE) 2 30.0 0.300 NFRC 0.25 NFRC n/a 0.25 15 Total Proposed Fenestration Area 222.0 16 Maximum Allowed Fenestration Area 75.0 17 Compliance Statement Total Proposed Fenestration Area <_ Maximum Allowed Fenestration Area ❑ Yes Q No 18 Total Proposed West -Facing Fenestration Area 0.0 19 Maximum Allowed West -Facing Fenestration Area 60.0 20 Compliance Statement I Total Proposed West -Facing Fenestration Area <_ Maximum Allowed West -Facing Fenestration Area 13 Yes ❑ No 21 Proposed Fenestration U -factor (Windows) 0.283 22 Required Fenestration U -factor (Windows) 0.320 23 Compliance Statement Proposed Fenestration U -factor <_ Required Fenestration U -factor 12 Yes ❑ No 24 Proposed Fenestration SHGC (Windows) 0.250 25 Required Fenestration SHGC (Windows) 0.250 26 Compliance Statement Proposed Fenestration SHGC 5 Required Fenestration SHGC El Yes ❑ No 27 Proposed Fenestration U -factor (Skylights) 0.283 28 Required Fenestration U -factor (Skylights) 0.320 29 Compliance Statement I Proposed Fenestration U -factor <_ Required Fenestration U -factor aYes ❑ No 30 Proposed Fenestration SHGC (Skylights) 0.250 31Required Fenestration SHGC (Skylights) 0.250 32 Compliance Statement I Proposed Fenestration SHGC!g Required Fenestration SHGC ® Yes ❑ No CA Building Energy Efficiency Standards - 2016 Residential Compliance April 2016 t2 Prescriptive Residential Additions 300 For Less, or Additions That Do Not Require HERS Field Verification T CEC-CFIR-ADD-02-E Revised 04/16 CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE CFIR-ADD-02-E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 7 of 9) Project Name: Residence Addition Date Prepared: 4/24/2017 J. Space Conditioning (SC) Systems — Heating/Cooling (Prescriptive Section 150.2(b)) Alterations to Space Conditioning Systems shall be exempt from HERS verification requirements as prerequisite for use of the CF1R-ADD-02 and CF2R-ADD-02 Compliance Documents. If new space conditioning systems are installed or existing systems are altered and are not exempt from HERS verification, then a CF1R-ADD-01 shall be completed and registered with a HERS Provider Data Registry. In each row below for each dwelling unit in the building, check the box that indicates the exemption from HERS verification compliance: ❑ a: space conditioning system was not altered; ❑ b: less than 40 ft of ducts were added or replaced; ❑ c: (exempt from duct leakage testing) if: the existing duct system was insulated with asbestos; ❑ d: (exempt from duct leakage testing) if: the existing duct system was previously tested and passed by a HERS Rater. 01 02 03 04 Dwelling Unit Name SC System Identification or Name SC System Location or Area Served Exemption from HERS Verification Sitting Area HVAC System 126 0 a ❑ b ❑ c ❑ d 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 11 0 0 0 0 0 0 0 0 ❑c 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ❑b 0 0 0 0 0 0 CA Building Energy Efficiency Standards - 2016 Residential Compliance April 2016 Prescriptive Residential Additions 300 Ft2 or Less, or Additions That Do Not Require HERS Field Verification CEC CF1R ADD -02 E (Revised 04/16) CALIFORNIA ENERGY COMMISSION — CERTIFICATE OF COMPLIANCE CF1R-ADD-02-E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 8 of 9) Project Name: Residence Addition I Date Prepared4/24/201.7 K. Water Heating Systems (Section 150.2(a)1D) List water heaters and boilers for both domestic hot water (DHW) heaters and hydronic space heating. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 Dwelling Unit Name Water Heating System Identification or Name Water Heating System Location or Area Served Water Heating System Type Water Heater Type # Water Heaters in System Water Heater Storage Volume (gal) Fuel Type Rated Input Type Rated Input Value Heating Efficiency Type Heating Efficiency Value Standby Loss I%) Exterior Insulation R -Value Back -Up Solar Savings Fraction CA Building Energy Efficiency Standards - 2016 Residential Compliance April 2016 Prescriptive Residential Additions 300 Ft2 or Less, or Additions That Do Not Require HERS Field Verification CEC-CFIR-ADD-02-E Revised 04/16 CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE CF1R-ADD-02-E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 9 of 9) Project Name: Residence Addition Date Prepare/24/2017 DOCUMENTATION AUTHOR'S DECLARATION STATEMENT 1. 1 certify that this Certificate of Compliance documentation is accurate and complete. Documentation Author Name: Ricardo Aguilar Documentation Author Signature: Company: CADD Works Inc. Signature Date: 4/24/2017 Address: 31475 Calle Helene CEA/ HERS Certification Identification (if applicable): City/State/Zip: Thousand Palms, CA 92276 Phone. (760) 272-5183 RESPONSIBLE PERSON'S DECLARATION STATEMENT I certify the following under penalty of perjury, under the laws of the State of California: 1. The information provided on this Certificate of Compliance is true and correct. 2. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design identified on this Certificate of Compliance (responsible designer). 3. That the energy features and performance specifications, materials, components, and manufactured devices for the building design or system design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of Regulations. 4. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application. 5. 1 will ensure that a registered copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the building, and made available to the enforcement agency for all applicable inspections. I understand that a registered copy of this Certificate of Compliance is required to be included with the documentation the builder provides to the building owner at occupancy. Responsible Designer Name: Ricardo Aguilar Responsible Designer Signature: C1 Company: CADDworks, inc. Date Signed: 2 •2s1 Address: 31475 Calle Helene license: '5Cj City/State/Zip: Thousand Palms, CA 92276 Phone: (760) 272-5183 For assistance or questions regarding the Energy Standards, contact the Energy Hotline at: 1-800-772-3300. CA Building Energy Efficiency Standards - 2016 Residential Compliance April 2016 2016 Low -Rise Residential Mandatory Measures Summary NOTE: Low-rise residential buildings subject to the Energy Standards must comply with all applicable mandatory measures, regardless of the compliance approach used. Review the respective section for more information. *Exceptions may apply. Mrininal nR/20161 Building Envelope Measures: Air Leakage. Manufactured fenestration, exterior doors, and exterior pet doors must limit air leakage to 0.3 cfm/ft2 or less when tested per § 110.6(a)l: NFRC400 or ASTM E283 or AAMA/WDMA/CSA 10l/I.S.2/A440-2011.' § 110.6(a)5: Labeling. Fenestration products must have a label meeting the requirements of § 10-111(a). Field fabricated exterior doors and fenestration products must use LI -factors and solar heat gain coefficient (SHGC) values from TABLES § 110.6(b): 110.6-A and 110.6-13 for compliance and must be caulked and/or weatherstri ed.' Air Leakage. All joints, penetrations, and other openings in the building envelope that are potential sources of air leakage must be caulked, § 110.7: asketed, or weather stripped. § 110.8(a): Insulation Certification by Manufacturers. Insulation specified or installed must meet Standards for Insulating Material. § 110.8(g): Insulation Requirements for Heated Slab Floors. Heated slab floors must be insulated per the requirements of § 110.8(g). Roofing Products Solar Reflectance and Thermal Emittance. The thermal emittance and aged solar reflectance values of the roofing § 110.8(i): material must meet the requirements of 110.8(i) when the installation of a cool roof is specified on the CF1 R. § 110.80): Radiant Barrier. A radiant barrier must have an emittance of 0.05 or less and be certified to the Department of Consumer Affairs. Ceiling and Rafter Roof Insulation. Minimum R-22 insulation in wood -frame ceiling; or the weighted average U -factor must not exceed 0.043. Minimum R-19 or weighted average U -factor of 0.054 or less in a rafter roof alteration. Attic access doors must have permanently attached § 150.0(a): insulation using adhesive or mechanical fasteners. The attic access must be gasketed to prevent air leakage. Insulation must be installed in direct contact with a continuous roof or ceiling which is sealed to limit infiltration and exfiltration as specified in § 110.7, including but not limited to placing insulation either above or below the roof deck or on top of a drywall ceiling.* § 150.0(b): Loose -fill Insulation. Loose fill insulation must meet the manufacturer's required density for the labeled R -value. Wall Insulation. Minimum R-13 insulation in 2x4 inch wood framing wall or have a U -factor of 0.102 or less (R-19 in 2x6 or U -factor of 0.074 or § 150.0(c): less). Opaque non -framed assemblies must have an overall assembly U -factor not exceeding 0.102, equivalent to an installed value of R-13 in a wood framed assembly! § 150.0(d): Raised -floor Insulation. Minimum R-19 insulation in raised wood framed floor or 0.037 maximum U -factor.' § 150.010. Slab Edge Insulation. Slab edge insulafion must meet all of the following: have a water absorption rate, for the insulation material alone without facings, no greater than 0.3%; have a water vapor permeance no greater than 2.0 permfinch; be protected from physical damage and UV light deterioration; and, when installed as part of a heated slab floor, meet the requirements of § 11 0.8 . Vapor Retarder. In Climate Zones 1-16, the earth floor of unvented crawl space must be covered with a Class I or Class II vapor retarder. This § 150.0(g)l: requirement also applies to controlled ventilation crawls ace for buildings complying with the exception to § 150.0(d). Vapor Retarder. In Climate Zones 14 and 16, a Class I or Class II vapor retarder must be installed on the conditioned space side of all § 150.0(g)2: insulation in all exterior walls, vented attics, and unvented attics with air -permeable insulation. Fenestration Products. Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors must have a 150.0 § (q)' maximum U -factor of 0.58; or the weighted averse U -factor of all fenestration must not exceed 0.58.' Fireplaces, Decorative Gas Appliances, and Gas Log Measures: § 150.0(e)1A: Closable Doors. Masonry or factory -built fireplaces must have a closable metal or glass door covering the entire opening of the firebox. Combustion Intake. Masonry or factory -built fireplaces must have a combustion outside air intake, which is at least six square inches in area § 150.0(e)113: and is equipped with a readily accessible, operable, and tight -fitting damper or combustion -air control device.' § 150.0(e)1C: Flue Damper. Masonry or factory -built fireplaces must have a flue damper with a readily accessible control.' Pilot Light. Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside of § 150.0(e)2: the building, are prohibited. Space Conditioning, Water Heating, and Plumbing System Measures: Certification. Heating, ventilation and air conditioning (HVAC) equipment, water heaters, showerheads, faucets, and all other regulated § 110.0-§ 110.3: appliances must be certified by the manufacturer to the Energy Commission.' § 110.2(a): HVAC Efficiency. Equipment must meet the applicable efficiency requirements in TABLE 110.2-A through TABLE 110.2-K.' Controls for Heat Pumps with Supplementary Electric Resistance Heaters. Heat pumps with supplementary electric resistance heaters must have controls that prevent supplementary heater operation when the heating load can be met by the heat pump alone; and in which the § 110.2(b): cut -on temperature for compression heating is higher than the cut -on temperature for supplementary heating, and the cut-off temperature for compression heating is higher than the cut-off temperature for supplementary heating., Thermostats. All unitary heating or cooling systems not controlled by a central energy management control system (EMCS) must have a § 110.2(c): setback thermostat.' Water Heating Recirculation Loops Serving Multiple Dwelling Units. Water heating recirculation loops serving multiple dwelling units must § 110.3(c)5: meet the air release valve, backflow prevention, pump priming, pump isolation valve, and recirculation loop connection requirements of § 110.3(c)5. Isolation Valves. Instantaneous water heaters with an input rating greater than 6.8 kBTU/hr (2 kW) must have isolation valves with hose bibbs § 110.3(c)7: or other fittings on both cold water and hot water lines of water heating systems to allow for water tank flushing when the valves are closed. Pilot Lights. Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces; household cooking appliances (appli- § 110.5: ances without an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt); and pool and spa heaters.' Building Cooling and Heating Loads. Heating and/or cooling loads are calculated in accordance with ASHRAE Handbook, Equipment § 150.0(h)l: Volume, Applications Volume, and Fundamentals Volume; SMACNA Residential Comfort System Installation Standards Manual; or ACCA Manual J using design conditions specified in § 150.0(h)2. 2016 Low -Rise Residential Mandatory Measures Summary Clearances. Installed air conditioner and heat pump outdoor condensing units must have a clearance of at least 5 feet from the outlet of any § 150.0(h)3A: dryer vent. Liquid Line Drier. Installed air conditioner and heat pump systems must be equipped with liquid line filter driers if required, as specified by § 150.0(h)3B: manufacturer's instructions. Storage Tank Insulation. Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water -heating systems, must have § 150.00)1: R-12 external insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the tank. Water piping and cooling system line insulation. For domestic hot water system piping, whether buried or unburied, all of the following must be insulated according to the requirements of TABLE 120.3-A: the first 5 feet of hot and cold water pipes from the storage tank; all piping with a § 150.00)2A: nominal diameter of 3/4 inch or larger; all piping associated with a domestic hot water recirculation system regardless of the pipe diameter; piping from the heating source to storage tank or between tanks; piping buried below grade; and all hot water pipes from the heating source to kitchen fixtures' - Water piping and cooling system line insulation. All domestic hot water pipes that are buried below grade must be installed in a water proof § 150.00)2B: and non -crushable casing or sleeve.' Water piping and cooling system line insulation. Pipe for cooling system lines must be insulated as specified in § 150.00)2A. Distribution § 150.00)2C: piping for steam and h dronic heating systems or hot waters stems must meet the requirements in TABLE 120.3-A.' § 150.00)3: Insulation Protection. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Insulation Protection. Insulation exposed to weather must be installed with a cover suitable for outdoor service. For example, protected by § 150.00)3A: aluminum, sheet metal, painted canvas, or plastic cover. The cover must be water retardant and provide shielding from solar radiation that can cause degradation of the material. Insulation Protection. Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space must have a § 150.00)36: Class I or Class II vapor retarder. Gas or Propane Systems. Systems using gas or propane water heaters to serve individual dwelling units must include all of the following: a 120V electrical receptacle within 3 feet of the water heater; a Category III or IV vent, or a Type B vent with straight pipe between the outside § 150.0(n)l: termination and the space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the water heater, and allows natural draining without pump assistance; and a gas supply line with a capacity of at least 200,000 Btu/hr. § 150.0(n)2: Recirculating Loops. Recirculating loops serving multiple dwelling units must meet the requirements of § 110.3(c)5. § 150.0(n)3: Solar Water -heating Systems. Solar water -heating systems and collectors must be certified and rated by the Solar Rating and Certification Corporation SRCC or by a listing agency that is approved by the Executive Director. Ducts and Fans Measures: § 110.8(d)3: Ducts. Insulation installed on an existing space -conditioning duct must comply with § 604.0 of the California Mechanical Code (CMC). If a contractor installs the insulation, the contractor must certify to the customer, in writing, that the insulation meets this requirement. CMC Compliance. All air -distribution system ducts and plenums must be installed, sealed, and insulated to meet the requirements of CMC §§ 601.0, 602.0, 603.0, 604.0, 605.0 and ANSI/SMACNA-006-2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition. Portions of supply -air and return -air ducts and plenums must be insulated to a minimum installed level of R-6.0 (or higher if required by CMC § 605.0) or a minimum installed level of R-4.2 when entirely in conditioned space as confirmed through field verification and diagnostic testing (RA3.1.4.3.8). Connections of metal ducts and inner core of flexible ducts must be mechanically fastened. Openings must be sealed with § 150.0(m)l: mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh or tape must be used. Building cavities, support platforms for air handlers, and plenums designed or constructed with materials other than sealed sheet metal, duct board or flexible duct must not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms must not be compressed to cause reductions in the cross-sectional area of the ducts.' Factory -Fabricated Duct Systems. Factory -fabricated duct systems must comply with applicable requirements for duct construction, § 150.0(m)2: connections, and closures; joints and seams of duct systems and their components must not be sealed with cloth back rubber adhesive duct tapes unless such tape is used in combination with mastic and draw bands. § 150.0(m)3: Field -Fabricated Duct Systems. Field -fabricated duct systems must comply with applicable requirements for: pressure -sensitive tapes, mastics, sealants, and other requirements specified for duct construction. Backdraft Dampers. All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or § 150.0(m)7: automatic dampers. Gravity Ventilation Dampers. Gravity ventilating systems serving conditioned space must have either automatic or readily accessible, § 150.0(m)8: manually operated dampers in all openings to the outside, except combustion inlet and outlet air openings and elevator shaft vents. Protection of Insulation. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Insulation exposed to weather must be suitable for outdoor service. For example, protected by aluminum, sheet metal, painted canvas, or § 150.0(m)9: plastic cover. Cellular foam insulation must be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation. § 150.0(m)10: Porous Inner Core Flex Duct. Porous inner core flex duct must have a non -porous layer between the inner core and outer vapor barrier. Duct System Sealing and Leakage Test. When space conditioning systems use forced air duct systems to supply conditioned air to an § 150.0(m)l1: occupiable space, the ducts must be sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in accordance with § 150.0 m 11 and Reference Residential Appendix RA3. Air Filtration. Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal § 150.0(m)12: conditioning component, except evaporative coolers, must be provided with air filter devices that meet the design, installation, efficiency, pressure drop, and labeling requirements of § 150.0 m 12. 2016 Low -Rise Residential Mandatory Measures Summary Duct System Sizing and Air Filter Grille Sizing. Space conditioning systems that use forced air ducts to supply cooling to an occupiable space must have a hole for the placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPP) in the supply plenum. The space conditioning system must also demonstrate airflow, z 350 CFM per ton of nominal cooling capacity through the return § 150.0(m)13: grilles, and an air -handling unit fan efficacy <_ 0.58 W/CFM as confirmed by field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3.3. This applies to both single zone central forced air systems and every zone for zonally controlled central forced airs stems.' Ventilation for Indoor Air Quality. All dwelling units must meet the requirements of ASHRAE Standard 62.2. Neither window operation nor §150.0(0): continuous operation of central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of providing whole -building ventilation. Field Verification and Diagnostic Testing. Whole -building ventilation airflow must be confirmed through field verification and diagnostic § 150.0(o)1A: testing, in accordance with Reference Residential Appendix RA3.7. Pool and Spa Systems and Equipment Measures: Certification by Manufacturers. Any pool or spa heating system or equipment must be certified to have all of the following: a thermal efficiency that complies with the Appliance Efficiency Regulations; an on-off switch mounted outside of the heater that allows shutting off the heater § 110.4(a): without adjusting the thermostat setting; a permanent weatherproof plate or card with operating instructions; and must not use electric resistance heating.* Piping. Any pool or spa heating equipment must be installed with at least 36 inches of pipe between the filter and the heater, or dedicated § 110.4(b)1: suction and return lines, or built-in or built-up connections to allow for future solar heating. § 110.4(b)2: Covers. Outdoor pools or spas that have a heat pump or gas heater must have a cover. Directional inlets and time switches for pools. Pools must have directional inlets that adequately mix the pool water, and a time switch that § 110.4(b)3: will allow all pumps to be set or programmed to run only during off-peak electric demand periods. § 110.5: Pilot Light. Natural gas pool and spa heaters must not have a continuously burning pilot light. Pool Systems and Equipment Installation. Residential pool systems or equipment must meet the specified requirements for pump sizing, flow 150.0 § (p)' rate, piping, filters, and valves.' Lighting Measures: Lighting Controls and Components. All lighting control devices and systems, ballasts, and luminaires must meet the applicable requirements § 110.9: of § 110.9.' JAB High Efficacy Light Sources. To qualify as a JAB high efficacy light source for compliance with § 150.0(k), a residential light source must § 110.9(e): be certified to the Energy Commission according to Reference Joint Appendix JAB. § 150.0(k)1A: Luminaire Efficacy. All installed luminaires must be high efficacy in accordance with TABLE 150.0-A. Blank Electrical Boxes. The number of electrical boxes that are more than 5 feet above the finished floor and do not contain a luminaire or § 150.0(k)1 B: other device must be no greater than the number of bedrooms. These electrical boxes must be served by a dimmer, vacancy sensor control, or fan speed control. Recessed Downlight Luminaires in Ceilings. Luminaires recessed into ceilings must meet all of the requirements for. insulation contact (IC) § 150.0(k)1C: labeling; air leakage; sealing; maintenance; and socket and light source as described in § 150.0(k)1C. A JA8-2016-E light source rated for elevated temperature must be installed by final inspection in all recessed downli ht luminaires in ceilings. Electronic Ballasts. Ballasts for fluorescent lamps rated 13 watts or greater must be electronic and must have an output frequency no less than § 150.0(k)1 D: 20 kHz. Night Lights. Permanently installed night lights and night lights integral to installed luminaires or exhaust fans must be rated to consume no § 150.0(k)1 E: more than 5 watts of power per luminaire or exhaust fan as determined in accordance with § 130.0(c). Night lights do not need to be controlled by vacancy sensors. Lighting Integral to Exhaust Fans. Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods) § 150.0(k)1 F: must meet the applicable requirements of § 150.0(k).* Screw based luminaires. Screw based luminaires must not be recessed downlight luminaires in ceilings and must contain lamps that comply § 150.0(k)1 G: with Reference Joint Appendix JAB. Installed lamps must be marked with "JA8-2016" or "JA8-2016-E" as specified in Reference Joint Appendix JA8.' § 150.0(k)1 H: Enclosed Luminaires. Light sources installed in enclosed luminaires must be JAS compliant and must be marked with "JA8-2016-E." § 150.0(k)2A: Interior Switches and Controls. All forward phase cut dimmers used with LED light sources must comply with NEMA SSL 7A. § 150.0(k)2B: Interior Switches and Controls. Exhaust fans must be switched separately from lighting systems! Interior Switches and Controls. Luminaires must be switched with readily accessible controls that permit the luminaires to be manually § 150.0(k)2C: switched ON and OFF. § 150.0(k)2D: Interior Switches and Controls. Controls and equipment must be installed in accordance with manufacturer's instructions. Interior Switches and Controls. No control must bypass a dimmer or vacancy sensor function if the control is installed to comply with § 150.0(k)2E: 150.0(k). § 150.0(k)2F: Interior Switches and Controls. Lighting controls must comply with the applicable requirements of § 110.9. Interior Switches and Controls. An energy management control system (EMCS) may be used to comply with dimmer requirements if it: § 150.0(k)2G: functions as a dimmer according to § 110.9; meets the Installation Certificate requirements of § 130.4; meets the EMCS requirements of § 130.5 ; and meets all other requirements in § 150.0(k)2. Interior Switches and Controls. An EMCS may be used to comply with vacancy sensor requirements in § 150.0(k) if it meets all of the § 150.0(k)2H: following: it functions as a vacancy sensor according to § 110.9; the Installation Certificate requirements of § 130.4; the EMCS requirements of § 130.5(f); and all other requirements in § 150.0(k)2. Interior Switches and Controls. A multiscene programmable controller may be used to comply with dimmer requirements in § 150.0(k) if it § 150.0(k)21: provides the functionality of a dimmer according to § 110.9, and complies with all other applicable requirements in § 150.0(k)2. 2616 Low -Rise Residential Mandatory Measures Summary Interior Switches and Controls. In bathrooms, garages, laundry rooms, and utility rooms, at least one luminaire in each of these spaces must § 150.0(k)2J: be controlled by a vacancy sensor. Interior Switches and Controls. Dimmers or vacancy sensors must control all luminaires required to have light sources compliant with § 150.0(k)2K: Reference Joint Appendix JAB, except luminaires in closets less than 70 square feet and luminaires in hallways.' § 150.0(k)2L: Interior Switches and Controls. Undercabinet lighting must be switched separately from other lighting systems. Residential Outdoor Lighting. For single-family residential buildings, outdoor lighting permanently mounted to a residential building, or to other buildings on the same lot, must meet the requirement in item § 150.0(k)3Ai (ON and OFF switch) and the requirements in either item § 150.0(k)3A: § 150.0(k)3Aii (photocell and motion sensor) or item § 150.0(k)3Aiii (photo control and automatic time switch control, astronomical time clock, or EMCS. Residential Outdoor Lighting. For low-rise multifamily residential buildings, outdoor lighting for private patios, entrances, balconies, § 150.0(k)3B: and porches; and outdoor lighting for residential parking lots and residential carports with less than eight vehicles per site must comply with either § 150.0(k)3A or with the applicable requirements in §§ 110.9, 130.0, 130.2, 130.4, 140.7 and 141.0. Residential Outdoor Lighting. For low-rise residential buildings with four or more dwelling units, outdoor lighting not regulated by § 150.0(k)3C: 150.0(k)3B or § 150.0(k)3D must comply with the applicable requirements in §§ 110.9, 130.0, 130.2;130.4,140.7 and 141.0. § 150.0(k)3D: Residential Outdoor Lighting. Outdoor lighting for residential parking lots and residential carports with a total of eight or more vehicles per site must comply with the applicable requirements in §§ 110.9, 130.0, 130.2, 130.4, 140.7, and 141.0. Internally illuminated address signs. Internally illuminated address signs must comply with § 140.8; or must consume no more than 5 watts of § 150.0(k)4: ower as determined according to § 130.0(c). Residential Garages for Eight or More Vehicles. Lighting for residential parking garages for eight or more vehicles must comply with the § 150.0(k)5: applicable requirements for nonresidential garages in §§ 110.9, 130.0, 130.1, 130.4, 140.6, and 141.0. Interior Common Areas of Low-rise Multi -Family Residential Buildings. In a low-rise multifamily residential building where the total interior § 150.0(k)6A: common area in a single building equals 20 percent or less of the floor area, permanently installed lighting for the interior common areas in that building must be high efficacy luminaires and controlled by an occupant sensor. Interior Common Areas of Low-rise Multi -Family Residential Buildings. In a low-rise multifamily residential building where the total interior common area in a single building equals more than 20 percent of the floor area, permanently installed lighting in that building must: § 150.0(k)6B: i. Comply with the applicable requirements in §§ 110.9, 130.0,130.1, 140.6 and 141.0; and ii. Lighting installed in corridors and stairwells must be controlled by occupant sensors that reduce the lighting power in each space by at least 50 percent. The occupant sensors must be capable of turning the light fully on and off from all designed paths of ingress and egress. Solar Ready Buildings: Single Family Residences. Single family residences located in subdivisions with ten or more single family residences and where the § 110.10(a)1: application for a tentative subdivision map for the residences has been deemed complete by the enforcement agency must comply with the requirements of § 110.10 b through § 110.10 e . § 110.10(a)2: Low-rise Multi -family Buildings. Low-rise multi -family buildings must comply with the requirements of § 110.10(b) through § 110.10(d). Minimum Area. The solar zone must have a minimum total area as described below. The solar zone must comply with access, pathway, smoke ventilation, and spacing requirements as specified in Title 24, Part 9 or other Parts of Title 24 or in any requirements adopted by a local jurisdiction. The solar zone total area must be comprised of areas that have no dimension less than 5 feet and are no less than 80 square feet each for buildings with roof areas less than or equal to 10,000 square feet or no less than 160 square feet each for buildings with roof areas § 110.10(b)l: greater than 10,000 square feet. For single family residences the solar zone must be located on the roof or overhang of the building and have a total area no less than 250 square feet. For low-rise multi -family buildings the solar zone must be located on the roof or overhang of the building, or on the roof or overhang of another structure located within 250 feet of the building, or on covered parking installed with the building project, and have a total area no less than 15 percent of the total roof area of the building excluding any skylight area.' § 110.10(b)2: Orientation. All sections of the solar zone located on steep -sloped roofs must be oriented between 110 degrees and 270 degrees of true north. Shading. The solar zone must not contain any obstructions, including but not limited to: vents, chimneys, architectural features, and roof § 110.10(b)3A: mounted equipment.* Shading. Any obstruction located on the roof or any other part of the building that projects above a solar zone must be located at least twice the § 110.10(b)3B: distance, measured in the horizontal plane, of the height difference between the highest point of the obstruction and the horizontal projection of the nearest point of the solar zone, measured in the vertical lane.' Structural Design Loads on Construction Documents. For areas of the roof designated as solar zone, the structural design loads for roof § 110.10(b)4: dead load and roof live load must be clearly indicated on the construction documents. Interconnection Pathways. The construction documents must indicate: a location for inverters and metering equipment and a pathway for § 110.10(c): routing of conduit from the solar zone to the point of interconnection with the electrical service (for single family residences the point of interconnection will be the main service panel); and a pathway for routing of plumbing from the solar zone to the water -heating system. Documentation. A copy of the construction documents or a comparable document indicating the information from § 110.10(b) through § 110.10(d): 110.10 c must be provided to the occupant. § 110.10(e)l: Main Electrical Service Panel. The main electrical service panel must have a minimum busbar rating of 200 amps. Main Electrical Service Panel. The main electrical service panel must have a reserved space to allow for the installation of a double pole circuit § 110.10(e)2: breaker for a future solar electric installation. The reserved space must be: positioned at the opposite (load) end from the input feeder location or main circuit location; and permanently marked as "For Future Solar Electric".