BELC2017-005778-495 CALLE,TAMPJCO . :,_ D VOICE (760) 777-7125
LA QUINTA, CALIFORNIA 92253 FAX (760) 777-7011DESIGN & DEVELOPMENT DEPARTMENT INSPECTIONS (760) 777-7153
BUILDING PERMIT
Date: 7/6/2017
Application Number: BELC2017-0057 Owner:
Property Address: 78046 CALLE BARCELONA OLD TOWN ARTISAN STUDIO
APN: 770153004 78-134 CALLE TAMPICO, SUITE 160
Application Description: GRUND / ADDITIONAL ELE SERVIC QQO ANE® LA QUINTA, CA, 92201,
Property Zoning:
Application Valuation: $20,000.00
Applicant: JUL 0 6 2017
pp Contractor:
D C ELECTRIC SERVICES D C ELECTRIC SERVICES
P 0 Box 5790 CIS OF LA QUIM'A P 0 BOX 5790
LA QUINTA, CA 92248 LA QUINTA, CA 92248
DESIGN AND DEVELOPMENT DEPARTMEN
(760)578-9348
Llc. No.: 979936
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter
9 (commencing with Section 7000) of Division 3 of the Business and Professions Code,
and my License is in full force and effect.
License Class: C10 License No.: 97993
Tok ✓ srlI Co tractor.
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State
License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any
city or county that requires a permit to construct, alter, improve, demolish, or repair
any structure, prior to its issuance, also requires the applicant for the permit to file a
signed statement that he or she is licensed pursuant to the provisions of the
Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division
3 of the Business and Professions Code) or that he or she is exempt therefrom and the
basis for the alleged exemption. Any violation of Section 7031.S by any applicant for a
permit subjects the applicant to a civil penalty of not more than five hundred dollars
($500).:
(_) 1, as owner of the property, or my employees with wages as their sole
compensation, will do the work, and the structure is not intended or offered for sale.
(Sec. 7044, Business and Professions Code: The Contractors' State License Law does not
apply to an owner of property who builds or improves thereon, and who does the work
himself or herself through his or her own employees, provided that the improvements
are not intended or offered for sale. If, however, the building or improvement is sold
within one year of completion, the owner -builder will have the burden of proving that
he or she did not build or improve for the purpose of sale.).
(_) I, as owner of the property, am exclusively contracting with licensed contractors
to construct the project. (Sec. 7044, Business and Professions Code: The Contractors'
State License Law does not apply to an owner of property who builds or improves
thereon, and who contracts for the projects with a contractor(s) licensed pursuant to
the Contractors' State License Law.).
(_) I am exempt under Sec. . B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for
the performance of the work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Na
Lender's Addn
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
I have and will maintain a certificate of consent to self -insure for workers'
compensation, as provided for by Section 3700 of the Labor Code, for the performance
of the work for which this permit is issued.
I have and will maintain workers' compensation insurance, as required by
Section 3700 of the Labor Code, for the performance of the work for which this permit
is issued. My workers' compensation insurance carrier and policy number are:
Carrier: PREFERRED EMPLOYERS INSURANCE COMPANY Policy Number:
I certify that in the performance of the work for which this permit is issued, I
shall not employ any person in any manner so as to become subject to the workers'
compensation laws of California, and agree that, if I should become subject to the
workers' compensation provisions of Section 3700 o e Labor Code, I shall forthwith
comply with t ose p ovisions. QJ/ Ma�Z�61--
7 � plica t: N
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL,
AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO
ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF
COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE,
INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT: Application is hereby made to the Building Official for a permit subject to
the conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose
request and for whose benefit work is performed under or pursuant to any permit
issued as a result of this application , the owner, and the applicant, each agrees to, and
shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and
employees for any act or omission related to the work being performed under or
following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is
not commenced within 180 days from date of issuance of such permit, or cessation of
work for 180 days will subject permit to cancellation.
I certify that I have read this application and state that the above information is correct.
I agree to comply with all city and county ordinances and state laws relating to building
construction, and hereby authorize representatives of this city to enter upon the
above -men one property for inspection purposes.
Date: Signature (Applicant or Agent):
Date: 7/6/2017
Application Number: BELC2017-0057
Property Address: 78046 CALLE BARCELONA
APN: 770153004
Application Description: GRUND / ADDITIONAL ELECTRICAL SERVICE 400A PANEL
Property Zoning:
Application Valuation: $20,000.00
Owner:
OLD TOWN ARTISAN STUDIO
78-134 CALLE TAMPICO, SUITE 160
LA QUINTA, CA, 92201,
Applicant: Contractor:
D C ELECTRIC SERVICES D C ELECTRIC SERVICES ,
P O BOX 5790 P 0 BOX 5790
LA QUINTA, CA 92248, LA QUINTA, CA 92248
(760)578-9348
Llc. No.: 979936
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Detail: AN ADDITIONAL 400 AMP SERVICE FOR KILN ROOM EQUIPMENT. S KILNS INSTALLED WITH EXHAUST FAN VOLTAGES REQUIRES AN ADDITONAL
SERVICE PER CEC 230.2(C3)(D)
SPECIAL NOTE FOR LABELING 230.2(E)IDENTIFICATION.
WHERE A BUILDING OR STRUCTWE IS SUPPLIED BY MORE THAN ONE SERVICE, OR ANY COMBINATION OF BRANCH CIRCUITS, FEEDERS, AND SERVICES, A
PERMANENT PLAQUE OR DIRECTORY SHALL BE INSTALLED AT EACH SERVICE DISCONNECT LOCATION DENOTING ALL OTHER SERVICES, FEEDERS, AND
BRANCH CIRCUITS SUPPLYING THAT BUILDING OR STRUCTURE AND THE AREA SERVED BY EACH.
FINANCIAL INFORMATION
DESCRIPTION ACCOUNT QTY AMOUNT
BSAS SB1473'FEE
101-0000-20306 0 $1.00
Total Paid for BUILDING STANDARDS ADMINISTRATION BSA: $1.00
DESCRIPTION
ACCOUNT
QTY
AMOUNT
SERVICES
101-0000-42403
0
$25.33
DESCRIPTION
ACCOUNT
QTY
AMOUNT
SERVICES PC
101-0000-42600
0
$12.67
Total Paid for ELECTRICAL: $38.00
DESCRIPTION"
ACCOUNT
QTY
AMOUNT
PERMIT ISSUANCE -
101-0000-42404
0
$96.27
Total Paid for PERMIT ISSUANCE: $96.27
DESCRIPTION
ACCOUNT
QTY
AMOUNT
TECHNOLOGY ENHANCEMENT FEE
502-0000-43611
0
$5.00
Total Paid for TECHNOLOGY ENHANCEMENT FEE: $S.00
Bin # City of La Quinta
Building &' Safety Division ,
Permit # S EL t" l �„ s' 78-495 Calle Tampico
La Quinta, CA 92253 - (760) 777-7012
Building Permit Application and Tracking Sheet
Project Address: 8014(Q A Owner's Name: V( (,Y%sY
A. P. Number:
Address: 7i00 4 (Q ('&, G �! R� Cftov.,&
Legal Description:
City, ST, Zip: LA I*j CA q LZ,53
Contractor: C
�.
Te le h one:
P 7 1
7
Address: Pam.?��
Project Description:
City, ST, Zip:
Te one:7 5"? �l
le h P
'f
State Lic. #: s C.10
City Lic. #;
Arch., Engr., Designer -
Address:
City, ST, Zip:
Telephone: h one:
=>::::>:::�:::>:->.;•;. �
�`%�.:z:::>::>:::>:::<:;<::::?r: l:•»:.:;->:.:;><
Construction n o T e: P
cu an
Y cy:
P
State Lic.
pro-
lect type (circle one): New Add> n Alter Repair Demo
Name of Contact Person:
W V21
A CO-0
Sq. Ft:
# Stories:
# Units:
# of Contact Person:
I'VTelephone S"'
Estimated Value of Project:T zo r,
APPLICANT: DO NOT WRITE BELOW THIS LINE
#
Submittal
Req'd
Rec'd
TRACKING
PERMIT FEES
Plan Sets
Plan Check submitted
Item
Amount
Structural Calcs.
Reviewed, ready for corrections
Plan Check Deposit
Truss Calcs.
Called Contact Person
Plan Check Balance
Title 24 Calcs.
Plans picked up
Construction
Flood plain plan
Plans resubmitted
Mechanical
Grading plan
2- Review, ready for correctionsfissue
Electrical
Subcontactor List
Called Contact Person
Plumbing
Grant Deed
Plans picked up
S.M.I.
H.O.A.-Approval
Plans resubmitted
Grading
IN HOUSE:-
'"' Review, ready for correctionstissue
Developer Impact Fee
Planning Approval
Called Contact Person
A.I.P.P.
Pub. Wks. Appr
Date of permit issue
School Fees
Total Permit Fees
JUN 2 3 2017
CITY OF LA QUINTA
COMMUNITY DEVELOPMENT
1;709.
gib•
—IT ,7
R E C E-TV E D
JUN 2 3 2017
CITY OF LA QUINTA
COMMUNITY DEVELOPMENT
4
av �,
usa.siemens.com/COMPAS
SIEMENS TRANSMITTAL LETTER Date: 6/15/2017
To: T.L.R. ENTERPRISES INC
83311 AVE 45
INDIO, CA, 92201
US
Job Name: OTAS
Quote Name: OTAS
Quote Number: cruzdx00c_06151700_00_00_000
Distributor: T.L.R. ENTERPRISES INC
Drawings are for: Approval❑✓ Record❑
Please find enclosed 1 Copy of the below listed materials for the above referenced job.
Contents:
Molded Case Breakers JPanelboards
Approval Drawings:
Upon the return of 1 Copy of "Approved " or "No Exceptions Noted" drawings with release, it will be considered fact that the
material as shown meets the requirements of the plans and specifications. For drawings returned indicating "Approved as
Noted" or "Exceptions as Noted", the cost of any additional equipment not included in the original quotation will be reflected in
the total invoice price. Any changes other than those shown on these returned drawings will not be considered the
responsibility of Siemens. It must be noted that these drawings and descriptive literature incorporate Siemens' interpretation of
the plans and specifications and are subject to corrections of errors. The above material is on "Hold for Release" status and
will not be released until the receipt of signed submittals having one of the above notations with formal release. These
drawings along with release should be returned as soon as possible so as not to cause any delays in shipping and/or
escalation that might be incurred due to these delays.
Record Drawings:
These drawings reflect the products manufactured by Siemens for this job.
Submitted By:
David Cruz
Desert Electric Supply
74875 Velie Way
Phone: 760-568-5991
E Mail: DavidC@DesertElectric.com
Fax:
SIEMENS
To: T.L.R. ENTERPRISES INC
83311 AVE 45
INDIO, CA 92201
USA
Attention:
Job Name:
OTAS
Quote Name:
OTAS
Quote #:
cruzdx00c 06151700 00 00 000
Bid Date:
06/15/2017
Proposal
OCf 4Kf6lERR1t.SU V>lY•-
From: Desert Electric Supply
74875 Velie Way
Palm Desert, CA
USA
David Cruz
Tel. No.: 760-568-5991
DavidC@DesertElectric.com
Siemens Industry, Inc. (Company) agrees to sell to Purchaser and Purchaser agrees to purchase from the
Company the goods described below. Written quotations are valid for 30 calendar days from price approval date
unless otherwise stated in the quotation. Quotations are subject to change by Siemens Industry, Inc. at any time
upon written notice to Purchaser. Quoted Lead times refer to the manufacturing cycles, in working days, at time of
quotations and are subject to change.
Quote Notes:
Line #: Qty Description
20000 1 MAIN--JXD22B400
JXD22B400-JXD2 @ 65K, 240 VAC, 2Pole, Frame Amperage:400A, Non
Interchangeable Trip, Trip Amperage:400A, THERMAL MAGNETIC, Lugs Line:#3/0-
500KCMIL CU / #4/0-500 AL, Lugs Load:#3/0-500KCMIL CU / #4/0-500 AL,
Enclosure:TYPE 3R, Enclosure -Neutral, Padlocking Device, Field Assembly.
Quoted Lead Time: 3-5 Working Days
1 - JXD226400
1 - BREAKER JD 2P 400A 240V 65KA FX NIL
4 - BREAKER JD/LD AUCU LUGS 500KCMIL
1 - BREAKER JD ENCLOSURE Neutral
1 - BREAKER JD/LD/LMD PADLOCK DEVICE
1 - BREAKER JD ENCLOSURE TYP 3R
21000 1 DIST—PANELBOARD P1
Quoted Lead Time: 7 Working Days
1 - SECTION
P1A42ML400ATSN, System Voltage: 120/240 10 3W GND Neutral AC, IR
@ 10,000 AIC, Top Feed, Surface Mount, Bus Rating: 400A, Bus Material:
Aluminum, Plating: Tin, NEMA 1 INDOOR; Series Rated.
1 - INTERIOR W/ 400A MAIN LUG
1 - (1)4/0-600Kcmil
1 - Card Holder-Std Plastic Sleeve
1 - Seismically Qualified
1 - Certification - UL
1 - Std AI/Cu Gnd Connector
28 - BUBQD PROVISION
4 - 50A /2P-BL
1 - 70A /2P-BL
cruzdx00c 06151700 00 00 000 1 6/15/2017
SIEMENS
Proposal C
ocs.Qur.,. Y,lecauc., S UY,IIY•
4 - 40A /1 P-BL
Enclosure, Catalog Number B62
Front, Catalog Number S62B
Global Notes:
Bidding this bill of Material only, only items listed here are included. Subject to approval unless otherwise noted. NOT
responsible for engineering errors and ommisions.
1. FOB - Factory, Freight Prepaid & Charge.
2. Drawing for approval available after order received & release to production.
3. No studies or analysis are included unless noted otherwise.
4. Price based on this Complete BOM only.
5. Quote is good for 30 days.
***NOTE: Special shipping instructions such as Lift gate truck, Flat bed, etc are subject to additional fees NOT included in
this B.O.M.***
***NOTE: FUSES ARE NOT INCLUDED UNLESS OTHERWISE NOTED.***
*****APPLICABLE TAXES EXTRA*****
Price Policy: Standard quote is valid for 30 days from price approval date.
Payment: Per Siemens distributor's terms.
Shipping: Shipment of goods will be made after receipt of all the following at Company's production facility:
(a) Purchase Order / Electronic PO, (b) Technical Information, and if required (c) Drawing
Approval.
Freight: Freight allowed on orders over $1000.00 provided Seller selects the Route Option: BESTRT - Best
Route.
Delivery: FOB Shipping Point, unless stated otherwise.
Other: This proposal is subject to credit approval and US government regulation. It is also based on the
Company's interpretation of the plans and specifications and is subject to correction for errors in
such plans or specifications. This document and any other documents specifically referred to as
being a part hereof constitute the entire agreement on the subject matter and it shall not be
modified except in writing signed by both parties.
THIS PROPOSAL IS BASED UPON SIEMENS STANDARD TERMS AND CONDITIONS OF
SALE ATTACHED HERETO AND INCLUDED HEREIN. Company hereby objects to any additional
or different terms set forth in Purchaser's request for proposal, specifications, purchase order, or
any other document of Purchaser. Acceptance of additional or different terms must be specifically
assented to in writing by Company.
NUCLEAR - Buyer represents and warrants that the goods covered by this contract shall not be
used in or in connection with a nuclear facility or application. 'If Buyer is unable to make such
representation and warranty, then Buyer agrees to indemnify and hold harmless Siemens and to
waive and require its insurers to waive all right of recovery against Siemens for any damage, loss,
destruction, injury or death resulting from a "nuclear incident", as that term is defined in the Atomic
Energy Act of 1954, as amended, whether or not due to Siemens' negligence.
cruzdx00c 06151700 00 00 000 2 6/15/2017
SIEMENS Proposal
OCCKn E�E<Tit�<.Su. vl�v.
SIEMENS STANDARD TERMS AND CONDITIONS OF SALE FOR PRODUCTS
Version 1. 1/Restrieted Date: 07/01/2016
1. APPLICABLE TERMS. This Agreement governs the sale of equipment, components, parts, and materials provided by Siemens
("Products"). Any applicable addenda, these terms, Siemens proposal, price quote, purchase order, or acknowledgement issued by Siemens
form the parties' final agreement ("Agreement"). In the event of a conflict between these documents, precedence shall apply in accordance
with the order listed in the previous sentence. Siemens' proposal, offer or acceptance is conditioned on Buyer's acceptance of this Agreement.
Any additional or conflicting terms in Buyer's request for proposal, specifications, purchase order or any other written or oral communication
are not binding on Siemens unless separately signed by Siemens. Siemens' failure to object to Buyer's additional or conflicting terms does not
operate as a waiver of any terms contained in this Agreement.
2. PRICING & PAYMENT. Prices and payment terms are: (i) as stated in Siemens' proposal, or if none are stated; (ii) Siemens'
standard prices in effect when Siemens receives Buyer's purchase order; or if neither (i) or (ii) apply, then Siemens' standard prices in effect
when the Products ship.
(a) Payment. Unless stated in Siemens' proposal, all payments are due net thirty (30) days from the invoice date in United States Dollars.
(b) Credit Approval. All orders are subject to credit approval by Siemens. Siemens may modify, suspend or withdraw the credit amount or
payment terms at any time. If there is doubt as to Buyer's financial condition, Siemens may withhold manufacturing or shipment, require cash
payments, or require other satisfactory security. Siemens may recover shipped Products from the carrier pending such assurances.
(c) Installment Shipment. Where Products are delivered in shipments or only part of a shipment fails to comply with this Agreement, the Buyer
may only reject the non -compliant portion. Buyer will separately pay for each shipment. If Siemens holds or stores Products for Buyer, it shall
do so at Buyer's sole risk and expense.
(d) Taxes, Shipping, Packing, Handling. Unless stated in writing by Siemens, Siemens' prices exclude charges for freight, unloading, storage,
insurance, taxes, excises, fees, duties or other government charges related to the Products. Buyer will pay these amounts or reimburse Siemens.
If Buyer claims a tax or other exemption or direct payment permit, Buyer will provide a valid exemption certificate or permit and indemnify,
defend and hold Siemens harmless from any taxes, costs and penalties arising from same. Siemens' prices include the costs of its standard
domestic packing only. Any packing deviation, including U.S. Government sealed packing, will be charged to Buyer. Increases, changes
(including in application), adjustments or surcharges which may be incurred are for Buyer's account.
(e) Late Payments. Late payments shall bear interest at an annual percentage rate of twelve percent (12%) or the highest rate allowed bylaw,
whichever is lower.
(f) Disputed Invoice. If Buyer disputes all or any portion of an invoice, it must first deliver written notice to Siemens of the disputed amount
and the basis for the dispute within twenty-one (21) days of receiving the invoice. Failure of Buyer to timely notify Siemens of any dispute
constitutes a waiver of Buyer's claim. If Buyer only disputes a portion of the invoice, Buyer must pay the undisputed portion in accordance
with Article 2(a). Upon resolution of the dispute, Buyer must pay the invoice or the remainder of the invoice, plus any accrued interest on the
late payment.
(g) Suspension/Termination Right. Siemens may suspend work if an undisputed invoice is more than thirty (30) days past due. Siemens may
terminate this Agreement if an undisputed invoice is more than sixty (60) days past due. Unless prohibited by law, Siemens may also terminate
this Agreement immediately in the event of a material adverse change in Buyer's financial condition including, but not limited to, bankruptcy,
insolvency, liquidation or similar financial condition.
3. DELIVERY; TITLE; RISK OF LOSS. Products will be delivered F.O.B. Siemens point of shipment with title and risk of loss or
damage passing to Buyer at that point. Buyer is responsible for all transportation, insurance and related expenses. The related expenses shall
include any taxes, duties or documentation fees. Siemens may make partial shipments. Any shipping, delivery and installation dates are
estimated dates only. Siemens is not liable for any loss or expense incurred by Buyer or Buyer's customers if Siemens fails to meet its delivery
schedule.
4. DEFERMENT AND CANCELLATION. Buyer has no right to defer shipment but may cancel this Agreement on thirty (30) days
written notice if Siemens has not already performed. If Buyer cancels this Agreement, it shall pay all cancellation charges including, without
limitation: (i) the full price for any finished Product; (ii) for partially completed product, the portion of the price determined to be due by
Siemens based on its percentage of completion of the Product; (iii) reasonable overhead and profit; and (iv) any payments due subcontractors
and/or suppliers for any materials, components or products ordered which cannot be cancelled, refunded, or redirected for other beneficial use.
5. TRANSPORTATION AND STORAGE. (a) When Products are ready for shipment, Siemens will: (i) inform Buyer, and Buyer
will then promptly give shipping instructions to Siemens; (ii) determine the method of transportation and shipment routing; and (iii) ship the
cruzdx00c 06151700 00 00 000 3 6/15/2017
SIEMENS Proposal
Products with freight prepaid by normal transportation. If Buyer fails to provide timely shipping instructions, Siemens will ship the Products
by normal transportation means to Buyer or to a storage location selected by Siemens. Buyer will pay or reimburse any excess transportation
charges for special or expedited transportation.
(b) If Products are placed into storage, delivery occurs and risk of loss transfers to Buyer when the Products are placed on the carrier for
shipment to the storage location. If the Products are to be stored in the facility where manufactured, delivery occurs and risk of loss transfers to
Buyer when placed in the storage location.
Buyer will pay all Siemens' storage expenses, including but not limited to, preparation for and placement into storage, handling, freight,
storage, inspection, preservation, maintenance, taxes and insurance, upon receipt of an invoice(s) from Siemens. When conditions permit and
upon payment to Siemens of all amounts due, Buyer must arrange, at its expense, to remove the Products from storage. Buyer bears the risk of
loss, damage or destruction to Products in storage.
6. FORCE MAJEURE / DELAYS. If Siemens' performance is delayed by any cause beyond its reasonable control (regardless of
whether the cause was foreseeable), including without limitation acts of God, strikes, labor shortage or disturbance, fire, accident, war or civil
disturbance, delays of carriers, cyber-attacks, terrorist attacks, failure of normal sources of supply, or acts or inaction of government, Siemens'
time of performance will be extended by a period equal to the length of the delay plus any consequences of the delay. Siemens will notify
Buyer within a reasonable time after becoming aware of any such delay.
7. BUYER'S REQUIREMENTS. Siemens' performance is contingent upon Buyer timely fulfilling all of its obligations under this
Agreement. These obligations include the Buyer supplying all documents and approvals needed for Siemens to perform, including but not
limited to technical information and data, drawing and document approvals, and necessary commercial documentation. Siemens may request a
change order for an equitable adjustment in prices and times for performance, as well as for any additional costs or any delay resulting from the
failure of Buyer or Buyer's contractors, successors or assigns to meet these obligations.
8. INDEMNITY. Siemens and Buyer (each as an "Indemnitor") shall indemnify the other ("Indemnitee") from and against all third
party claims alleging bodily injury, death or damage to a third party's tangible property, but only to the extent caused by the Indemnitor's
negligent acts or omissions. If the injury or damage is caused by the parties' joint or contributory negligence, the loss and/or expenses shall be
home by each party in proportion to its degree of fault. No part of the Product(s) or Buyer's site is considered third party property.
Indemnitee shall provide the Indemnitor with prompt written notice of any third party claims covered by this Article. Indemnitor has the
unrestricted right to select and hire counsel and the exclusive right to conduct the legal defense and/or settle the claim on the Indemnitee's
behalf The Indemnitee shall not make any admission(s) which might be prejudicial to the Indemnitor and shall not enter into a settlement
without the express permission of the Indemnitor.
9. WARRANTIES. (a) Warranties. Siemens warrants that: (i) each Product is free from defects in material and workmanship; (ii)
each Product materially conforms to Siemens' specifications that are attached to, or expressly incorporated into this Agreement; and (iii) at the
time of delivery, Siemens has title to each Product free and clear of liens and encumbrances (collectively, the "Warranties"). The Warranties
do not apply to software furnished by Siemens. The sole and exclusive warranties for any software are set forth in the applicable Software
License/Warranty Addendum.
(b) Conditions to the Warranties. The Warranties are conditioned on: (i) no repairs, modifications or alterations being made to the Product
other than by Siemens or its authorized representatives; (ii) Buyer handling, using, storing, installing, operating and maintaining the Product in
compliance with any parameters or instructions in any specifications attached to, or incorporated into this Agreement; (iii) compliance with all
generally accepted industry standards; (iv) Buyer discontinuing use of the Product after it has, or should have had, knowledge of any defect; (v)
Buyer providing prompt written notice of any warranty claims within the warranty period described below; (vi) at Siemens' discretion, Buyer
either removing and shipping the Product or non -conforming part thereof to Siemens, at Buyer's expense, or granting Siemens reasonable
access to the Products to assess the warranty claims; (vii) Product not having been subjected to accident (including force majeure), alteration,
abuse or misuse; and (viii) Buyer not being in default of any payment obligation.
(c) Exclusions from Warranty Coverage. The Warranties do not apply to any equipment not provided by Siemens under this Agreement.
Any Product that is described as being experimental, developmental, prototype, or pilot is specifically excluded from the Warranties and is
provided to Buyer "as is" with no warranties of any kind. Normal wear and tear is excluded, including any expendable items that comprise part
of the Product (such as fuses, light bulbs and lamps). Siemens does not warrant or guarantee that any Product will be secure from cyber threats,
hacking or similar malicious activity. Products that are networked, connected to the internet, or otherwise connected to computers or other
devices must be appropriately protected by Buyer and/or end user against unauthorized access.
(d) Warranty Period. Buyer must provide written notice of any claims for breach of Warranties by the earlier of twelve (12) months from initial
operation of the Product or eighteen (18) months from shipment. Additionally, absent written notice within the warranty period, any use or
possession of the Product after expiration of the warranty period is conclusive evidence that the Warranties have been satisfied.
(e) Remedies. Buyers sole and exclusive remedies for breach of the Warranties are limited, at Siemens' discretion, to repair or replacement of
the Product, or its non -conforming parts, within a reasonable time period, or refund of all or part of the purchase price. The warranty on
cruzdx00c 06151700 00 00 000 4 6/15/2017
SIEMENS Proposal
repaired or replaced parts is limited to the remainder of the original warranty period. Unless Siemens agrees otherwise in writing, Buyer will be
responsible for any costs associated with: (i) gaining access to the Product; (ii) removal, disassembly, replacement, installation, or
reinstallation of any equipment, materials or structures to permit Siemens to perform its warranty obligations; (iii) transportation to and from
the Siemens factory or repair facility; and (iv) damage to equipment components or parts resulting in whole or in part from non-compliance by
the Buyer with Article 9(b) or from their deteriorated condition. All exchanged Products replaced under this Warranty will become the
property of Siemens.
(i) Transferability. The Warranties are only transferable during the warranty period and only to the Product's initial end -user.
(g) THE WARRANTIES IN THIS ARTICLE 9 ARE SIEMENS' SOLE AND EXCLUSIVE WARRANTIES AND ARE SUBJECT TO THE
LIMJTS OF LIABILITY IN ARTICLE 10 BELOW. SIEMENS MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
COURSE OF DEALING AND USAGE OF TRADE.
10. LE%UT'ATION OF LIABILITY. NOTWITHSTANDING ANYTHING IN THIS AGREEMENT TO THE CONTRARY,
SIEMENS IS NOT LIABLE, WHETHER BASED IN CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT
LIABILITY, INDEMNITY OR ANY OTHER LEGAL OR EQUITABLE THEORY, FOR: LOSS OF USE, REVENUE, SAVINGS, PROFIT,
INTEREST, GOODWILL OR OPPORTUNITY, COSTS OF CAPITAL, COSTS OF REPLACEMENT OR SUBSTITUTE USE OR
PERFORMANCE, LOSS OF INFORMATION AND DATA, LOSS OF POWER, VOLTAGE IRREGULARITIES OR FREQUENCY
FLUCTUATION, CLAIMS ARISING FROM BUYER'S THIRD PARTY CONTRACTS, OR FOR ANY TYPE OF INDIRECT, SPECIAL,
LIQUIDATED, PUNITIVE, EXEMPLARY, COLLATERAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR FOR ANY OTHER
LOSS OR COST OF A SDAILAR TYPE.
SIEMENS' MAXIMUM LIABILITY UNDER THIS AGREEMENT IS THE ACTUAL PURCHASE PRICE RECEIVED BY SIEMENS FOR
THE PRODUCT THAT GAVE RISE TO THE CLAIM.
BUYER AGREES THAT THE EXCLUSIONS AND LIMITATIONS IN THIS ARTICLE 10 WILL PREVAIL OVER ANY CONFLICTING
TERMS AND CONDITIONS IN THIS AGREEMENT AND MUST BE GIVEN FULL FORCE AND EFFECT, WHETHER OR NOT ANY
OR ALL SUCH REMEDIES ARE DETERMINED TO HAVE FAILED OF THEIR ESSENTIAL PURPOSE. THESE LIMITATIONS OF
LIABILITY ARE EFFECTIVE EVEN IF SIEMENS HAS BEEN ADVISED BY BUYER OF THE POSSIBILITY OF SUCH DAMAGES.
THE WAIVERS AND DISCLAIMERS OF LIABILITY, RELEASES FROM LIABILITY AND LIMITATIONS ON LIABILITY
EXPRESSED IN THIS ARTICLE 10 EXTEND TO SIEMENS' AFFILIATES, PARTNERS, PRINCIPALS, SHAREHOLDERS,
DIRECTORS, OFFICERS, EMPLOYEES, SUPPLIERS, AGENTS, AND SUCCESSORS AND ASSIGNS.
11. PATENT AND COPYRIGHT INFRINGEMENT. Siemens will, at its option and expense, defend or settle any suit or
proceeding brought against Buyer based on an allegation that any Product or use thereof for its intended purpose constitutes an infringement of
any Patent Cooperation Treaty country member's patent or misappropriation of a third parry's trade secret or copyright in the country where the
Product is delivered by Siemens. Buyer will promptly give Siemens written notice of the suit or proceeding and the authority, information, and
assistance needed to defend the claims. Siemens shall have the full and exclusive authority to defend and settle such claim(s) and will pay the
damages and costs awarded in any suit or proceeding so defended. Buyer shall not make any admission(s) which might be prejudicial to
Siemens and shall not enter into a settlement without Siemens' consent. Siemens is not responsible for any settlement made without its prior
written consent. If the Product, or any part thereof, as a result of any suitor proceeding so defended is held to constitute infringement or its use
by Buyer is enjoined, Siemens will, at its option and expense, either: (i) procure for Buyer the right to continue using said Product; (ii) replace
it with substantially equivalent non -infringing Product; or (iii) modify the Product so it is non -infringing.
Siemens will have no duty or obligation under this Article 11 if the Product is: (i) supplied according to Buyer's design or instructions and
compliance therewith has caused Siemens to deviate from its normal course of performance; (ii) modified by Buyer or its contractors after
delivery; or (iii) combined by Buyer or its contractors with devices, methods, systems or processes not furnished hereunder and by reason of
said design, instruction, modification, or combination a suit is brought against Buyer. In addition, if by reason of such design, instruction,
modification or combination, a suit or proceeding is brought against Siemens, Buyer must protect Siemens in the same manner and to the same
extent that Siemens has agreed to protect Buyer under this Article 11.
THIS ARTICLE I I IS AN EXCLUSIVE STATEMENT OF SIEMENS' DUTIES AND BUYER'S REMEDIES RELATING TO PATENTS,
TRADE SECRETS AND COPYRIGHTS, AND DIRECT OR CONTRIBUTORY INFRINGEMENT THEREOF.
12. CONFIDENTIALITY. (a) Both during and after the tern of this Agreement, the parties will treat as confidential all information
obtained from the disclosing party and all information compiled or generated by the disclosing party under this Agreement for the receiving
party, including but not limited to business information, manufacturing information, technical data, drawings, flow charts, program listings,
software code, and other software, plans and projections. Neither party may disclose or refer to the work to be performed under this Agreement
in any manner that identifies the other party without advance written permission. However, Siemens has the right to share confidential
information with its affiliates and subcontractors, provided those recipients are subject to the same confidentiality obligations set forth herein.
(b) Nothing in this Agreement requires a party to treat as confidential any information which: (i) is or becomes generally known to the public,
without the fault of the receiving party; (ii) is disclosed to the receiving party, without obligation of confidentiality, by a third party having the
cruzdx00c 06151700 00 00 000 5 6/15/2017
SIEMENS Proposal
Oq Ct'i 6 LltTM IC, s u➢, 0, lY.
right to make such disclosure; (iii) was previously known to the receiving party, without obligation of confidentiality, which fact can be
demonstrated by means of documents which are in the possession of the receiving party upon the date of this Agreement; (iv) was
independently developed by receiving party or its representatives, as evidenced by written records, without the use of discloser's confidential
information; or (v) is required to be disclosed by law, except to the extent eligible for special treatment under an appropriate protective order,
provided that the party required to disclose by law will promptly advise the originating party of any requirement to make such disclosure to
allow the originating party the opportunity to obtain a protective order and assist the originating party in so doing.
(c) It is Siemens' policy not to unlawfully or improperly receive or use confidential information, including trade secrets, belonging to others.
This policy precludes Siemens from obtaining, directly or indirectly from any employee, contractor, or other individual rendering services to
Siemens confidential information of a prior employer, client or any other person which such employee, contractor, or individual is under an
obligation not to disclose. Buyer agrees to abide by this policy.
13. COMPLIANCE WITH LAWS. The parties agree to comply with all applicable laws and regulations, including but not limited to
those relating to the manufacture, purchase, resale, exportation, transfer, assignment or use of the Products.
14. CHANGES IN WORK No change will be made to the scope of work unless Buyer and Siemens agree in writing to the change
and any resulting price, schedule or other contractual modifications. If any change to any law, rule, regulation, order, code, standard or
requirement impacts Siemens' obligations or performance under this Agreement, Siemens may request a change order for an equitable
adjustment in the price and time of performance.
15. NON -WAIVER Any waiver by a party of strict compliance with this Agreement must be in writing, and any failure by the parties
to require strict compliance in one instance will not waive its right to insist on strict compliance thereafter.
16. MODIFICATION OF TERMS. This Agreement may only be modified by a written instrument signed by authorized
representatives of both parties.
17. ASSIGNMENT. Neither party may assign all or part of this Agreement, or any rights or obligations under this Agreement, without
the prior written consent of the other; but either party may assign its rights and obligations, without recourse or consent, to any parent, wholly
owned subsidiary, or affiliate or affiliate's successor organization (whether as a result of reorganization, restructuring or sale of substantially all
of a party's assets). However, Buyer shall not assign this Agreement to: a competitor of Siemens; an entity in litigation with Siemens; or an
entity lacking the financial capability to satisfy Buyer's obligations. Any assignee expressly assumes the performance of any obligation
assigned. Siemens may grant a security interest in this Agreement and/or assign proceeds of this Agreement without Buyer's consent.
18. APPLICABLE LAW AND JURISDICTION. This Agreement is governed by and construed in accordance with the laws of the
State of Delaware, without regard to its conflict of laws principles. The application of the United Nations Convention on Contracts for the
International Sale of Goods is excluded. BOTH SIEMENS AND BUYER KNOWINGLY, VOLUNTARILY AND IRREVOCABLY WAIVE
ALL RIGHTS TO A JURY TRIAL IN ANY ACTION OR PROCEEDING RELATED IN ANY WAY TO THIS AGREEMENT. Each party
agrees that claims and disputes arising out of this Agreement must be decided exclusively in a federal or state court of competent jurisdiction
located in a state in which either Buyer or Siemens maintains its principal place of business. Each party submits to the personal jurisdiction of
such courts for the purpose of litigating any claims or disputes.
19. SEVERABIIdTY. If any provision of this Agreement is held invalid, illegal or unenforceable, the remaining provisions will not in
any way be affected or impaired. A court may modify the invalid, illegal or unenforceable provision to reflect, as closely as possible, the
parties' original intent.
20. EXPORT / IMPORT COMPLIANCE. Buyer acknowledges that Siemens is required to comply with applicable export / import
laws and regulations relating to the sale, export, import, transfer, assignment, disposal and use of the Products, including any export / import
license requirements. Buyer agrees that Products will not at any time directly or indirectly be used, exported, imported, sold, transferred,
assigned or otherwise disposed of in a manner which will result in non-compliance with any export / import laws and regulations. Siemens'
continuing performance hereunder is conditioned on compliance with such export / import laws and regulations at all times.
21. PRODUCT RETURNS. Prior to the return of any Product to Siemens, Buyer must identify the Product or portion thereof and
obtain written authorization and shipping instructions from Siemens. Siemens has the right, in its sole discretion, to permit or reject any such
return. Siemens' authorization to return any Product to Siemens does not relieve Buyer of its obligation to pay for such Product. Upon receipt,
inspection, and acceptance of the Product by Siemens, Siemens will issue a credit memo to Buyer, less applicable re -stocking fees. Siemens
reserves the right to reject any hazardous material.
22. NUCLEAR. Unless expressly authorized in writing by Siemens, the Products must not be used in or in connection with a nuclear
facility or application. If Buyer uses any Product in connection with any nuclear facility or activity, it does so at its own risk and Buyer will
indemnify, defend and hold Siemens harmless, and waives and will require its insurers to waive all right of recovery against Siemens for any
damage, loss, destruction, injury or death resulting from a "nuclear incident," as defined in the Atomic Energy Act of 1954, as amended,
whether or not due to Siemens' negligence. Siemens' consent to Buyer's use of the Product in connection with any nuclear facility or
application will be subject to additional terms and conditions that Siemens deems necessary to protect its interests.
cruzdx00c 06151700 00 00 000 6 6/1 b/2U1 /
SIEMENS
Proposal
23. SURVIVAL. The articles titled "Patent and Copyright Infringement," "Limitation of Liability,"Confidentiality," "Delivery; Title;
Risk of Loss," "Export / Import Compliance," and "Nuclear" survive termination, expiration or cancellation of this Agreement.
PURCHASEWs ACCEPTANCE Siemens Industry, Inc.
The foregoing is hereby accepted. By
(Name of Purchaser)
By
Title
Date
Siemens Industry, Inc.
SIEMENS STANDARD TERMS AND CONDITIONS OF SALE FOR PRODUCTS
July 1, 2016 (Versionl.1/Restricted)
cruz&00c 06151700 00 00 000 7 6/15/2017
SIEMENS
Project Name: OTAS
Quote #: cruzdx00c 06151700 00 00 000
CONTENTS: JXD2213400 BREAKER JD 2P 400A 240V 65KA FX NL
Drawings are for: Approval ❑✓ Record ❑
Engineer:
Contractor:
Distributor:. T.L.R. ENTERPRISES INC
Date:
Submitted By: David Cruz
Tel. No.: 760-568-5991
Fax No.:
Desert Electric Supply
74875 Velie Way
Palm Desert, CA,
SIEMENS
JD & LD Frame
Information and
Instruction Guide
wi
3.
biieu-n !P;tA 0273C
Information and Instructions
General Information
General
JD and LD-Frame Sentron" Series Circuit breakers, as shown
on pages 5 and 6, are for use in individual enclosures, switch-
boards and paneiboards. They are available as thermal mag-
netic with interchangeable trip units (types JD6(-A), HJD6(-A),
HHJD6, LD6(-A), HLD6(-A), HHLD6), thermal magnetic with
non -interchangeable trip units (types JXD2(-A), JXD6(-A),
HJXD6(-A), HHJXD6, LXD6(-A), HLXD6(-A), HHLXD6), current
limiting with non -interchangeable trip units (types CJD6 and
CLD6) instantaneous magnetic trip only (motor circuit protec-
tors - types JXD6-ETI, LXD6-ETI, CJD6-ETI, CLD6-ETI) and
molded case switches (types JXD2, JXD6, LXD6, CJD6,
CLD6). For 100 percent applications see pages 46 thru 50.
CJD6 and CLD6 circuit breakers combine thermal magnetic
construction for overload protection and an additional set of
"blow -apart" contacts in conjunction with the Sentron Series
standard "blow -apart" contacts. This arrangement provides for
current limiting protection under high fault interrupting condi-
tions as outlined in the National Electric Code, Article 240-11 O
and UL 4892 standards. CJD6 and CLD6 circuit breakers are
fuseless and therefore require no blown fuses to be located
and replaced should a high current fault occur. The common
trip feature of the circuit breaker is completely retained so that
all poles of the circuit breaker open when caused to trip due
to an overload or short circuit.
Pressure wire connectors, suitable for use with aluminum or
copper wire, are available for all JD and LD-Frame circuit
breakers. Rear connection studs or plug-in connector assem-
blies are also available (2 and 3-pole). The latter mounting
arrangement permits removal of the circuit breaker from a cir-
cuit without removing wiring leads. Special features such as a
shunt trip, auxiliary and alarm switches and undervoltage trip
devices are available for field adaptation. The installation and
removal of these devices is to be accomplished by qualified
personnel only. These devices are mounted internally and
Underwriters Laboratories listed, page 53. Information con-
cerning these special devices is found on pages 26-29 and 51
Thermal Magnetic
JXD2(-A), JD6(-A), JXD6(-A), HJD6(-A), HJXD6(-A), HHJD6,
HHJXD6, CJD6, LD6(-A), LXD6(-A), HLD6(-A), HLXD6(-A),
HHLD6, HHLXD6, CLD6 type circuit breakers provide com-
plete overload and short circuit protection when applied within
their design parameters. Overload and short circuit tripout is
accomplished by time -delay thermal trip elements and instan-
taneous magnetic trip devices. Nominal instantaneous trip
values are externally adjustable with eight trip points as
shown at the top of the next column.
D National Electric Code (240-11)
"A current limiting overcurrent protective device, which, when interrupting
currents in its current limiting range, will reduce the current flowing in the
faulted circuit to a magnitude substantially less than that obtainable in the
same circuit, if the device were replaced with a solid conductor having com-
parable impedance."
® Underwriters Laboratories (UL 489, Par. 2.5)
"A circuit breaker that does not employ a fusible element and that when
operating within its current limiting range, limits the let -through Izt to a value
less than the R of a 112 cycle wave of the symmetrical prospective current."
Breaker
Nominal Instantaneous Values
Ampere
Rating
Low
2
3
4
5
6
7
High
200-300
1250
1 1430
1610
1790
1960
2140
2320
2500
350-450
2000
2290
2570
2860
3140
3430
3710
4000
500-600
3000
3430
3860
4290
4710
5140
5570
6000
Circuit breakers are calibrated at the factory, under controlled
temperature conditions for applications at 40°C (104°F) ambi-
ent to meet requirements as outlined in UL 489 Standard for
molded case circuit breakers. The cover on the trip unit is
sealed to prevent access to the trip elements. Alterations
of the calibration of these elements should not be attempted.
Removal of the special sealed line cover voids the Under-
writers Laboratories, Inc. listing for -hat specific circuit
breaker. Catalog information is located on pages 46-50.
Molded Case Switch
A molded case switch is available in the JXD2, JXD6, LXD6,
CJD6, CLD6 type circuit breakers. This device employs the
same operating mechanism as the thermal magnetic and
magnetic only units. A preset instantaneous function is factory
installed to allow the switch to trip a -id protect itself at a high
fault condition. No overload or law fault current protection is
provided. This protection must be supplied by separate over -
current devices. Catalog information is located on pages 46-50.
Interrupting Ratings -Symmetrical RMS
Amperes (kA) Based on UL 489 Standards
The interrupting ratings of the JD anc LD-Frame circuit break-
ers are based on circuits adjusted to -he rated short circuit (at
specified voltage) before the insertion of the circuit breaker.
RMS Symmetrical Amperes WA)
UL A.I.R. kA
IEC A.I.R. kA
Breaker
Volts AC
Volts DC
Volts AC (50/60 Hz)
Type
720/240
380/415
500
240
48t1
600
250
`
ocu)
(lcs)
(ICU)
(Ws)
(ICU)
(Ics)
JXD2(-A)
65
-
-
30(2-P)
-
-
-
-
-
-
JD6(-A),
JXD6(-A)
65
35
25
30(2-')
25(3-P)
65
33
40
20
30
15
LD6(-A),
LXD6(-A)
HJD6(-A)
HLD6(-A)
100
65
35
30(2-P)
35(3-P)
100
50
65
33
42
21
HJXD6(-A)
HLXD6(-A)
HHJD6,
200
100
50
-
-
200
100
100
50
65
33
HHLD6
CJD6
CLD6
200
150
100
30(2-P)
50(3-P)
200*
*Meets IEC 157-Pl Interruption levels
Information and Instructions
r e
a
t Operation and Maintenance
Instantaneous Trip Circuit Breaker Operation: '
ETI motor circuit interrupters, types JX66-ETI, LXD6-ETI, With the mechanism latched and the contacts open, the oper-
CJD6-ETI,'CLD6-ETI (adjustable instantaneous magnetic trip •ating handle will be in the OFF position. Moving the handle to
only) are designed for use in welding circuits, motor circuits the ON position closes the contacts and establishes a circuit
and combination starters where short circuit protection only is through the breaker. Under overload or short circuit conditions
required. When.used in combination `starters, they serve in . ` sufficient to automatically trip or open the breaker, the oper--
conjunction with motor protective relays to offer'complete ating handle,moves to a position between ON and OFF. To '
protection. The relays guard against motor overloads and the relatch the circuit breaker after automatic operation, move the
circuit breaker provides short circuit protection. Catalog infor- . operating handle to the extreme OFF position. The circuit
mation is located on page 50: breaker is now ready for reclosing.
Instantaneous •Trip Adjustments The overcenter toggle mechanism is trip free of the operating
handle. The circuit breaker, therefore, cannot be held closed
MotoTFulb" E11�Tr�p';SetUngOampere '>•;.. by means of the handle should a tripping condition exist. After,
'waa amperes adjusrmerrc ' ±amperes? .. �} �pjg automatic operation, the handle assumes an intermediate
z'
�..
95-110
Low
1250
110-124
2
1430
400
124-138 .
3
1610
Low
138-151
4
1790
JXD621_400
151-165
5
. 1960
JXD631_400 `
165-178.
6
2140
CJD62L400
178-192
7 -
2320
CJD63L400-
192-227
High
2500
-154-176
Low
2000
176-198
2 f
2290
400 '
198-220
3
2570
Standard
220-242
4
2860
JxD62H400 '
242-264
5
3140
JXD63H400
264-285
6 -
3430
CJD62H400
285-308
7
3710
CJD63H400 ,
308-326
High
4000
155-176
Low
2000
176-198
2
2290
600
198-220
3
2570 ,
Low '
220-242
4
2860
LXD52L600
242-264
5
.3140
LXD63L600
264-285
6
3430
CLD62L600
285-308
7
3710
CLD631_600
308-326
High
4000
231-264
Low
3000
264-292 _
2 •
3430
600
292-330
3
3800 'r
Standard
330362
4
4290
LXD62H600
362-395
5
4710
LXD63H600
395-428
6
5140
CLD62H600
428-462
7-
5570
CLD63H600
462-490
High
6000
O All values calibrated within guidelines of LIL 489.
The instantaneous settings indicated are based on 11 times
full load motor current — use of this table must take into con-
sideration that any setting should be done in accordance with
applicable sections of the NEC to assure proper short circuit
protection as well as the ability to allow the motor to start
without nuisance tripping.
position between ON and OFF, displaying a clear indication of
tripping.
Maintenance
Experience has shown that properly applied molded case cir-
cuit breakers normally do not require maintenance. However,
some industrial users may choose to establish an inspection
and'maintenance procedure to be carried ouf on a regular ,
basis. For detailed information, consult applicable NEMA
publications or your local Siemens sales office.
.� E
i ! --- .-- - -
�
Breaker
! • it i. Outline
A �
• LOAD �'
Wiring Diagram for 500V do 3-Pole—
Ungrounded Systems Only
4 Figure 1 ,
JD and LD-Frame Outline DrawingsT-2 and 3 Pole(z
Types JXD2(-A), JD6(-A), JXD6(-A), HJD6(-A), HJXD6(-A), HHJD6, HHJXD6,
LD6(-A), LXD6(-A), HLD6(-A), HLXD6(-A), HHLD6, HHLXD6, JXD6-ETI, LXD6-ETI
Removable
Terminal
Shield
11 1009.75
Push -To -Trip
Button
-7.48
2.49 2.50
TO I Typ
3.01
2.
60
.63 Typ 85
1.42 2.50 2.50
Front View
�-2.50---J-2.50
End View
Line End
.281 Dia. Mounting Holes, ' .47 -1
.531 Dia. x 1.55 Deep .09-
Counterbore, 4 Holes I
Thick --Q3"Tper
.68
4.00 "-50'TriPped-
T 4 -
16*50
Reset
Magnetic
Trip 4.94
Adjustment I
-F .31
1.83
Removable
Terminal
Shield
Load End
Typ
1.52 1-49
.26 Typ-1
t
1.1311 J/
Ref
Detail A
Handle Operating Forces
-4.00 A
- 1.15
.65
78
Typ
s99=
A
--.38
Handle
.50 .31
Wirxeway
A34
(0 Ty
p
3.06
1.56
Typ
6 .78
.26 Typ TYP
1.15
L
B
Side View
pp®ratia
" 'J
:: :LP!Frarpe.0b.)
OFF to ON
44
44
ON to OFF
50
44
TRIPPED to RESET
60
60
w An orawing aimensions are snown in incries.
0 Two and 3-pole breakers are the same physical size. Current carrying parts
are omitted from the center in 2-pole breakers.
k,
JD and LD-Frame Outiline Drawings-2 and 3 Poled
Types CJD6, CLD6, CJD6-ETI, CLD6-ET1
Line End
a7 a.00
Removable - .281 Dia. Mounting Holes, A
Terminal 7.48 531 Dia. X 1.55 Deep _09 1.15 7Shield Counterbore, 6 Holes
2.49 -►�.- 2.50 -.I 65
Typ
Typ I Typ I
50 Thick I _78
13.5°Taper
� Lx 1
is 30°
t
4.
{:..
.68
s Lmkt�111
? 21° 30'
1 11.00 On14° 50'i 9.75 4.00 PPed t`+38
3.0112° 15'HandlePush-To-Trip 31 s c aButton Sqt ` Rese16* O Off ThE?' �iSfkl T Wirewal
a �''a�3� x��E,,•0'� i�yf y
-Magnetic
Ma netic
TriP
a; t w�o
17.86 Adjustment
nt - 31 3.21otf�uc.i.s'1jj
rY,r ti� tj'pYTt¢ztT«
, 3.062.60
k t . Ltd
i 3
Removable I t
t a a f r a Terminal i , ®: �t i ® 11.80 :i •= T x z;'t;::
Shield ' i
4. *sx i iE of
6.86 ci s:F`ic it tc i s 1SNiY� Tc
�kir B.-
k 6.66 i�x;4�>•t� i...�.;
.yif !•� i ik 't0 .. .G�:- -
a t� t. t t. < t t ^i it t aa{ . .:;.. 15°
5G ap ft.. L
rtl y 4 1 x S® 3 1.56 Typ
L� y''n ..K•e, t - I I 78
.63 TYP -►� 1.42 �-- 2.50 I I 2.50 Removable Terminal - Shield 65 Typ
-►I.85 k- Side VICW 1.15 26 Typ
B
Front View 1.50
I 26 Typ �1.521 1- 49 .88 5/16-18 Unc-2B
2.88
i i 1
.06 I' .06 . ' 1.30 Re
_ 5°Taper Typ96
OTH
��n�
Ref ;aG,`a, 1.25
W1Detail A 3/8-16 Unc-28
a 1.78
5.43h
Ref Detail B.
y, Handle Operating Forces
-wfa> ,leca rx. if,s- •i? ,d
1.13UJI
I I
- 2.50_ , _2.50 -►�
��rOjperatron�'��
��' J D.=.Fa�e�(Ib9) `
xrcicLa:.. rnf3.
LD-Franiehllb
OFF to ON
44
44
ON to OFF
50
44
TRIPPED to RESET
60
60
0All drawing dimensions are shown in inches.
End View ® Two and 3-pole breakers are the same physical size. Current carrying parts
6 are omitted from the center in 2-pole breakers.
Pressure Wire Connectors
Hazardous Voltage.
Will cause death or severe injury.
Turn power off supplying switchboard
or panel before installing.
A Safety Instructions
General
Each connector kit contains a solderless connector and associ-
ated hardware for making one line or load connection.
Installation
NOTE: Trip unit must be installed in circuit breaker prior
to mounting load end connector.
A. Tighten mounting screws (1) to securely attach connector.
pSee table for torque values.
B. Tighten set screws (2) securely to prevent overheating of
conductor and connector. See table for torque values.
f
1y„
Connector
Circuit Breaker
Connector
Set Screw
Mounting Screw
For Use With
Catalog Numbers
Ampere Rating
Wire Range
Torque (in-lbs.)
Torque (in-lbs.)
Frames
" `
200-600
(1-2) #3/0-500 kcmil (Cu)
300
132
JD-LD
•. .
(1-2) #4/0-500 kcmil (Al)
300
TA2J6500
250-600
(1) #500-750 kcmil (Al)
500
228
JD-LD
(1) #500-600 kcmil (Cu)
500
TA1L6750
200 600
(1) #3/0 600 kcmil (Cu)
500
228
JD LD
i
TC1J6600
200-600
(1-2) #3/0-500 kcmil (Cu)
300
132
JD-LD
TC2J6500
T
LD-Frame Time Current Curve
Type CLD6
I
,.
•�7.11
..i...�.��aM.._.....—■Y—
■owns1■B
...
...
CHARACTERISTIC CURVE
''
rninal. Tested in open aa Who Muent in all P-te'.
.
NEOUSTRIPTABLE
Bill
11101
�■pnr��ii::
mmulmimmH��1�:�.:��
:■B��l�1T[ME-CURRENT
" ]BE
:::I
aIO�A:::N:::NMgMN:::IN::n
Nu■■■IMIIAN■r■■■■rr■���Orr.or■■
■rr11�'.■/■n1/■lrlrr■.■■■■r1
■r■1
■Nlllr!■■■■■■L■IN.
■■■!1I■■!1
■%11i191
1'li�i'
CII
In,
iiiila:%ii
111111�IIIIIN1111■■IIIIIINIn
...
_r---
■Nq■�C■r
��—_r--■_r.o���—.r.■__--■
�■Nr■■Nr
■mN■r■
wN■■■■
a■■r■
RATING
NOMINAL IN NRTES
TAPE
"I
;;
..■■■�■��■■■■■■■
Nrrl�r.la■nlr..
"
500
__--■r�l--■LASM
_ .-■_
_r--■a--■
..
„
■r■r■NNI'�N\M
■■nr■■r�r■iI�rMN■rr■���uN■■Nunn■
�rHNNMNMgM■Nrr■■■■■■
.. RATING400
/■
I�1��Iw�a/rlH�N�■o1■NrL
■■i/H■■i■■fUlil:�
■n1■■rriDO
■■■:1�1\■■\III■■1■■■1■
„
�III�\1■�►`HI��IIIM■MIII�lIn
1,8100
111lI■�\II
I�11111■■IIMIIIII
II
•;
uu■M�q■■.r■■ANr00
on
ME ME
Nq■rM1�rvNnNr■■■��MNNquNrn
■Mllr�r■�'■■rr1►f■.r1��HNrrINlr170
"
nommi�mm
■rr1��■■,rrr1/■r�1■■.■■■rH■■"MamNrr1■■rr1�a.■ENH■■rr1
i■`\OEM
i%11■ugqulNiir■i:■n■i�gMii�■:�a■�■
'
v IN.■■��■!1■■!\���■N!!I■■!lIN.■■■!!IN!lIN.■■■!■1■■!!1
,
■niln■■■:1■■11�'t•■n111■■1■1��■■nll■■111��■■■YHn11
11111M■■11011111:wWN11/Nllw■�1■■�1�■■�IInGIfl
,
111�■Illllilllll■_■__IIIHII_■_I_111n11I1■■111111�1
BC=Na1�G
man
�C
:CG::�CG::�CGGG::OG:::�=�C■G�:GG�.:'
.
.
-]MEN
CNN
--is
ii:::�■—■iiM
"In'"
■rr■�MNNn■1
NN■r1
�■NI■■r■■■■rn■■r—■r■IN■r■■■■■r■�rr�■Nrr■■N■r■
■
iiiiiiiiiiii■iiiiiriii�iiii■i�iiilnl
!rH■■lrlr�.��
H■/■!!IN■lINI.H■rllrl■r/r1
uiii■ililiiiiiiiniiliiiniiliiiiiiiiiiii111iiuiiiaiil
'
N■■q■�N:N��■r���::���M�LNYC■:��gNN�Yv�:���_!WM■H���■�■��
MICRON
IS
■ALL:�L.■�■..11:�:LL:�_L:■!:LLL:LLn��IJ'L:LLI'�:L.R'L�■�■L■LLLL�:LL=
��n::�q���■����::�uNIgN1RRNl:CIN
■■nIN��Nrr1
■■rrr
�irr�/■rr1■■rr11�/1■■■rrnnrll�■r./■n1/■rr
N::��!■�
■uiii■i�iliiiiilii■ii�niriiiii■iiiiiiiiiiiiiiiiiiiiili
�:
IINI■■11111111111■■NIv11H11�■��■u�Ul■■/INIIIIIII
.,, .
■■rr.a�MMrr■NNrr■IUN�MNNrMNNrr!
Ir■NMr■MNNr■■NN■■
::::CND::
Iul'::m:lmLL
IN
onrr■■rrNMNrrr1N■r■r■
NNq■NMgMNNrr
INNr■■r■N
■.
`■Nu
MNN■■1�=■Nn■■■■■■■�rra1■Nr�
q■
r
n1 =■Nq
un■NNIr■Nluu
■■■■
NV
..
.
■■rHrn.■//�urH■1�■lrlr.n.■■rH/■ror�n�■■!ri■nIN.■/■rr1/■rr1
.
lM.::1■■
■■�I��G■ul■:
■■11,0111
HIM
:I�n■■
111■
�11
NUMM■N
111��
11�■■��
li�!1
��II�1G1
NII
IIIH■■HI�IIIII�11■■HII011lli�.'i.`�
►1�111�■�11�111�
.,'
,.
N■mIN■■MN■uuNM■�■rMNm■uMrr►'1'■1�
■■rr11N��■■rr1■■rrlNlrlr�/■rr1■■rr1�r>,���i1ur1■■rrl�nn■■rr1■■rn
uuu■N■rru■M■■rroor■
;`
.,
NlIB■■■!!1■■■■IN.■■■!!I■■!ll�f.\�II!!1■UlIN.■■■!■1■!!!I
mom
•
..
NN■■■■M�MNN■■■NN■■■NM�MNNr■■■Nrr■�iMMa1�n■■Nr■nNM■rMNN■r
/■
r/
■
rrlN��
■r■/■rt1�17•M1
r1■
r1
.
rri
Nnn■
■..
■■����:■�00::!■I�.■:�.■1■■ltlNl■■101�■I■:�lI�C■0:!■I��l�
..
■■■:Ian■■■::1■■::Ian■■■::1■■::1�1■■C��I:1■■■:I�n■■■::1■■:■1....
Nllw■■�Ilil��lll�■■�IIII�IIII�I■■�IIIII��III�■■�11
oilI
..
NII1�■11111111111■■11111111111■11111111111111■■INIIIIIIII
..
TD-7107 Multiples of Circuit Breaker Continuous Current Rating
23
Shunt Trip and Undervoltage Trip
Electrical Check
Shunt Trip
A. Reset and turn circuit breaker ON.
B. Attach test circuit to accessory leads. When the test volt-
age reaches 55 percent or more of the rated coil voltage,
the circuit breaker should trip.
C. With breaker TRIPPED or OFF, check to make sure coil cir-
cuit has opened.
Shunt
Trip
Limit Switch Closed
When Breaker
is Closed
r——
— — — — — —— --i
I
I
i
I
i
i
I
i
I
I
i
i
Customer
I
i
Supply I
Electrical Data For Shunt Trip
Coil
Inrush Current
Catalog
TAt
Rated Voltage
.
Voltage
(Amperes)'
Number .
60 Cycles AC
12
S19JLD6
24
S17JLD6
48
S1BJLD6
120
Consult
S01 JLD6
208
Sales
S02JLD6
240
Office
S03JLD6
277
S15JLD6
480
SO4JLD6
600
S06JLD6
DC
12
S16JLD6
24
Consult
S07JLD6
48
Sales
S09JLD6
125
Office
S11JLD6
250
S13JLD6
Undervoltage Trip
A. With breaker in TRIPPED position, connect test circuit to
accessory leads. Energize undervoltage trip device at 85
percent of the marked rated voltage of the coil. Reset and
turn breaker handle ON.
B. Reduce voltage to 35 percent of rated coil voltage. Circuit
breaker must trip.
r ——— — — — — —— ——i
I i
I I
I i
I Customer i
i Supply i
I- - - - - - - - - - - - - -I
Electrical Data For Undervoltage (UV) Trip(DO
Catalog
Coil
Sealed -in. Current
Number
Volta 9a
At Rated Voltage
t UV Trip
(Amperes)
Tri
1 UV p
Plus
Only
1 Aux. Sw.
60 Cycles AC
120
U01JLD62A
U01JLD6
208
UO2JLD62A
UO2JLD6
240
Consult
UO3JLD62A
UO3JLD6
277
Sales
U16JLD64A
U16JLD6
480
Office
U06JLD64A
U06JLD6
6000
N/A
U08JLD6
DC
24
U13JLD62A
U13JLD6
48
Consult
U14JLD62A
U14JLD6
125
Sales
U1OJLD62A
UIOJLD6
2500
Office
U12JLD62A
U12JLD6
O Resistor to be mounted externally of circuit breaker and connected by
installer.
O All auxiliary switch ratings are the same as auxiliary switch kit A01 FD64.
0 Kit includes a 30k ohm, 25 watt resistor (Clarostat Cat. No. VP-25-K or
equivalent)
® Kit includes a 2.5k ohm, 25 watt resistor (Clarostat Cat. No. VP-25-K or
equivalent).
28
Auxiliary Switch and Bell Alarm Switch
Electrical Check
Auxiliary Switch Kits
Catalog
Number
Number of
Switches
Ampere Rating of Switch
Volts AC
Volts DC
120
240
480
125
250
A01JLD64
A02JLD64
1
2
10
10
10
10
10
10
0.5
0.5 1
0.25
0.25
Switch Identification (All With Three Leads)
Wire
Markings
Wire
Color
Switch Terminals or Contacts
ColC1
White
C - Common terminal
A or Al
Black
N.O. - Contact open when breaker is open,
closed when breaker is closed.
B or Bt
Red
N.C. - Contact closed when breaker is open,
open when breaker is closed.
Accessory units that employ a combination will have the same wiring colors or
identifiers. A double auxiliary switch combination will use wiring markings A -Al,
B-81 and C-Cl.
Auxiliary Switch 10
A. Use a buzzer or light indicator attached to switch leads A
and C. With breaker in ON position, a light or buzzing noise
should be observed.
B. Move handle to OFF position. Indicator light or buzzer
should turn off.
C. Attach test to leads B and C. Light or buzzer should
turn on.
D. Repeat Steps A through C using leads Al, B1 and C1.
E. Move handle to ON position. Indicator light or buzzer
should turn off.
,O Should the indicator not function properly during "check" procedure, check
for incorrect installation or wiring.
Bell Alarm Switch Kits
Number of
Ampere Rating of Switch
Volts AC
Volts DC
Catalog
Auxiliary
Number
Switches
125
1 240
480
125
250
BOIJLD64
0
10
10
10
.5
.25
A01JLD64B
1
10
10
10
.5
.25
A02JLD646
2
10
10
10
.5
.25
Bell Alarm
Switch
A C B
Bell Alarm Identification (All With Three Leads)
Wire
Markings
Wire
Color
Switch Terminals or Contacts
C
White
C - Common terminal
A
Yellow
N.C. - Normally closed contact
(Closed when circuit breaker is tripped.)
B
Brown
N.O. - Normally open contact
(Open when circuit breaker is tripped.)
Bell Alarm Switch 01
A. Use a buzzer or light indicator attached to switch leads A
and C. With breaker in ON position, trip breaker by
depressing red trip button. Indicator light or buzzer should
operate.
B. Reset breaker to OFF. Indicator light or buzzer should
turn off.
C. Move breaker handle to ON. Indicator light or buzzer
should remain off.
29
Siemens Energy & Automation, Inc. For Nearest Sales Office
Power Distribution & Controls Division 1-800-964-4114 or 800-241-4453
3333 Old Milton Parkway www.sea.siemens.com/ For Product Information
Alpharetta, GA 30005 sales/salesoffices.html www.sea.siemens.com/power/
SIEMENS
Project Name: OTAS
Quote #: , cruzdx00c_06151700_00_00_000
CONTENTS: TYZ:PANELBOARD PANELBOARD P1
Drawings are for: Approval Z Record ❑
Engineer:
Contractor:
Distributor: T.L.R. ENTERPRISES INC
Date:
Submitted By: David Cruz
Tel. No.: 760-568-5991
Fax No..
Desert Electric Supply
74875 Velie Way
Palm Desert, CA,
DESIGNATION(S): DIST
PANELBOARD NOTES
62
1
3
5
7
9
11
13
15
17
19
211.0 21
23
25
27
29
31
33
35
37
39
41
MLO
400 A
BL 1 50A/2P 50Al2P 2 BL
3 4
BL 5 50A/2P 50Al2P 6 BL
7 8
0 70A/2P OA/1 P 10 BL
11 40Ah P 12 BL
BL 10 Alt P 40All P 14 BL
15 PROV PROV 16
17 PROV PROV 18
16 PROV PROV 20
21 PROV PROV 22
23 PROV PROV 24
25 PROV PROV 26 "
27 PROV PROV 28
29 PROV PROV 30
31 PROV PROV 32
33 PROV PROV 34
35 PROV PROV 36
37 PROV PROV 38
39 PROV PROV 60
411 PROV PROV 02
5.75 Deep 20.0
2*
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
SECTION :1 OF 1
PANEL TYPE :P1
CATALOG NUMBER :P1A42ML400ATSN
ENCLOSURE :1 Indoor
SYSTEM VOLTAGE :120/240 10 3W GND Neutral AC
IR RATING :10 K AIC
MAIN BUS :400 A
BUS MATERIAL :Tin Plated Aluminum
FEED :Top
MOUNTING :Surface
SE LABEL :No
SERIES RATED :Yes
CONDUIT AREA :N/A
'INDICATES POSITIONING NUMBERS TO HELP WITH THE
MANUAL PLACEMENT OF BREAKERS ON THE MECHANICAL VIEW
PANELBOARD COMPONENTS
Main:
1 - 400A MAIN LUG
1-(1)4/"OOKcmil
• Branches:
28 - BL/BOD PROVISION
4 - 50A /2P-BL
1 - 70A /2P-BL
4-40AAP-BL
Options :
1-Card Holder-Std Plastic Sleeve
1-Seismically Oualified
1-NP Location - Trim
1-Certification - UL
1-Std AI/Cu Gnd Connector
OTAS
0 cruzdx00c 6-15.2017
10. REVISIONS DRAWN BY DATE Siemens Industry, Inc.
cruzdx00 DIST
6.15.2017
cruzdx000c 06151700_00_00_000-21000-1
PANELBOARD NOTES
400A
(1)4/0-600KCMIL/PH AND N
BL 5oA/2P 3 E -
s
BL 50A/2P 7 <-
9
BL 70A/2P 11
BL 40A/1 P 13 -
PROV 15 <
PROV 17 <
PROV 19 <
PROV 21 <
PROV 23 <
PROV 25 <
PROV 27 <
PROV 29 <
PROV 31 <
PROV 33 <
PROV 35 <
PROV 37
PROV 39 E
PROV 41
2
4
BL 50Al2P
6
8
BL 50Al2P
= 10
BL 40AM P
— 12
BL 40A/1 P
— 14
BL 40A/1 P
= 16
PROV
= 18
PROV
20
PROV
— 22
PROV
�24
PROV
= 26
PROV
28
PROV
30
PROV
= 32
PROV
34
PROV
36
PROV
38
PROV
40
PROV
-'�>42
PROV
SECTION
:1 OF 1
PANEL TYPE
:P1
CATALOG NUMBER
:P1A42ML400ATSN
ENCLOSURE
:1Indoor
SYSTEM VOLTAGE
:120/240 10 3W GND Neutral AC
IR RATING
:10 K AIC
MAIN BUS
:400 A
BUS MATERIAL
:Tin Plated Aluminum
FEED
:Top
MOUNTING
:Surface
SE LABEL
:No
SERIES RATED
:Yes
CONDUIT AREA
:WA
'INDICATES POSITIONING NUMBERS TO HELP WITH THE
MANUAL PLACEMENT OF BREAKERS ON THE MECHANICAL VIEW
ABBREVIATIONS
'MLO' MAIN LUGS ONLY
OTAS
T.L.R. ENTERPRISES INC
cruzdx00 DIST
6.15.2017
cruzdx00c_06151700_00 00_000.21000-2
Siemens Industry, Inc. w�
Meter Socket / Enclosure Combination Cabinets
CT Rated
U122013(closed) U122013(open)
Application
• Removable test switch perch included
• Includes provisions to install model 6019/6067 CT mounts
• Receive ANSI C12.10 watthour meters
• Overhead and/or underground feed (see chart)
• Surface mount
Construction
• Ring type
• NEMA Type 38
• ANSI 61 gray E-coat finish
• Aluminum snap ring included
Standards
• UL 414 Listed
• ANSI C12.7
• EUSERC 313
• EUSERC 314
PartNPC Catalog Amp service Connections
Number Number Rating Jews Type Access Line load Neutral
*05150040
121815 20 5
10
OH/UG
114.010
114.010
#14 -110
78205150020'
121816 t20�.."'_ �,�., 6,,��;;10
. '
OHNG•:
= i14;i10!
: #14-#10 j
#14-#t0
78205150050
121818 20 8
10
OH/UG
#14 - 010
#14 • #10
#10
.014410
78205150080122013'
�w20''' _ ,r;13 1300_H/UG!' �'" : #14#10.
.-. #14 -#1D
%14, #10
78205122735
122015 20 15
30
OH/UG
114 • #10
#14.010
114.110
78�05150090 ,r.122018 x�Y;. �-- ^="'+TO p''-�, 8
0or30
� OH/UG
H4:-#10
3 #14-/10 :'.
#14-#10
78205149000
U121814 • 20 4
10
UG
114410
#14.010
014.010
�782051490t0' .:
(1iZ1815;3"'-'r�'Z0 �E• 5��'f'10l _.,N�`.
UG ° •
•. `r#1 f 0 :-#14�'%10.` v
#14 � 0�
78205149020
U121816_• 20 6
10
UG..
014-11110
014410
014-110
78205149030 U121818' '�►. •ZO .' 8
110or301
-=,UG-:' #14`-i10 r' #1410Pf#1�4110
78205149D40
U122013 • 20 13
30
UG
014 410
014 -110
114 - #10
7820514904SU12Z015;,1053000 ":•14 0 ' '_ i#14-#10 " .#14-i10 .
78205149DSO
U122018 • 20 8
10 or 30
UG
014 - #10
014 - 010
#14.010
Paritin Catalog - OverallOhnenslons, L Top Knockout
Number Number Height Width Depth Dimension Provision layout
782051� 50040�-121815 24- ' 11- 1511/16, H Hub Fig.1.,
78205150020 :',t121616 +'t&42'F :i24`�,,,, ;: 211=5"'
H78Z05150050 121818 42" 24" 11"t/16` HHub Fig.1
78205t5D080 22013:' ,c HHub -- .-="�"'Fig.2 ---
78105122735 122015
42" 24` 11"
1511/16" H Hub Fig. 2
78205150090 :722D1't,• ,
--" '' Z4:r=--^� 1 15II 7 HHub �fi .2
42 g�L�,l_ _e�_ _. �..Li .
78205149000 U121814•
52" 24" 11"
25'1/16" None Fig.1
78205149010�-fir U1218i5,' 52` _ ••u ;24711"
25ht/is` ' Non'-'�"��Fi 1
7B205149020 U121816"
52" 24' 11'
25hh/t6" None Fig. 1
7820514903121818,".'512A&
►11�
25h�/t8' °None ` x r` fi9!tf..-_
-78205149040 1.11122111113 •
52" 36" 11"
25hh/W - None Fig.2
78205t49045 U122015•T,52'
a.i36" r 11'
15tt/ts"-'.• None. ' . Fig 2 ;
70205149050 U1220180
52" 36" 11
25th/t6' None Fig.2
B-Line
by , E:T•N l
' Items beginning with "U" comply with EUSERC 314, all other items comply with EUSERC 313.
Data subject to change without notice. Consult local utility for -area acceptance. All dimensions are in inches,
71
Meter Mountng Equipment
Meter Socket / Enclosure -Combination. Cabinets
CT Rated
(U)121814 SS - Stainless Steel
(U)121815
(U1121816
(U)121818 _
(U1122O13
• IUI122O15
(U)122O18
4 1
r -
Teat Switch Perth
1114
-
y�
t
-
O
q-
'
\20110-327apped Doles 0 places)
This enclosure is assembled with the test switch
r
installed at a factory offset distmtca from the
r
corer (see Figure 11. U a greeter offset is desired.
Test Switch Parchhutructical
followthese instructions:
,
Body
Brackot
'p'•TONntlal
Body
Bracket
1, Uotanondremwmiheacrewahotdingtae•
#Kr„
-
'p-•20 ttut Nl • Toque ai in71Da
Torque AS iMbs
Perch
t p-•t9 Nut III • Torque s5 ireAbs`.
perch to die bracket remove the parch.
loosen end remove the nuts an the bracket .
Penh
Perch
studs.lSee Figure XI
_
•
2. Remove end rotate the brackets 190 degrees
t
Figure X
T
figure
end relocate beck ant o bracket uuda. lSee
fig are
Filmy) Then (ertenthenun back anthe '
_
bracket studs mM toquo them to /5 iMbs.
_.
ela]iScram 14)
Body
e1032Screw; (4) '_
1 PlacetheparchanthobracketsoM tenon
Torque 15 Wbs
Torque 35 indbs
with the screws. And toque screws to 75
<
Wlba.ISao Figure Zl
Data subject to change without notice. Consult local utility for area acceptance. All dimensions are in inches. Q •
u L1ne
' Meter Mounting Equipment
- 72
}
VA-W
•' CT Mounting Bases
6019 HE
6019HELS 5019HEL
Application
• For use with CT rated enclosures
• For use with ANSI C12.11 bar type
current transformers
Construction
• Bar mounts are studs on` A-
centers (lone & load)
Standards
• UL 414 Listed
• ANSI C12.7
• EUSERC 328A (6019 stud/stud)
• EUSERC 328E (6019 luOug)
• EUSERC 329A (6067 stud/stud)
• EUSERC 3298 (6067 lug/lug)
Pawtin Catalog Amp 8of C.T. Service — Phase/NeutralConductms --
Number Number Rating Provisions Type Access AIC Line toed
78205137750 6019 A "�f, AOO�j ,' ` ; T =10 ar 30/3W` t OH/UG r _ 'I OK �: Studs `.�k Studs
78205137755 6019 E 8W 2 10 or 3O/3W OH/UG 10K Studs Studs
�7820514U822 - --fi HA 1y'4, 4000 "� 2 = 10 0 30/3W p , OHN6 . sr ` 50K$'" Studs ;; •Studs
78205108761'" _ 6919 HAL 400 w 2 10 or 30i3W{ ,tOiWG 50K :� i4'_ 600 MCM /4 600 MW74
" 182U5i 11459 6014 HAIS�i� .i-p 4OOT' 2 0 0� 30/3W. OHAJ t� K `°" Studs. t4 - 600 MCM.
7820514GO26 601i HE 1800 2 10 or 30/3W MUG 50K Studs studs
178205108608�W19HEL80DIF:•2]00r30/3WOHNG t=r'^ 50KMCM
rr_ --
78205111461 6019 HELS 800 2 10 or 30/3W OH/UG 50K Studs 14 - 600 MCM
10K�',;rC, Studs A' Studs `Q"
78205137765' 6067 E 800 3 30/4W' OH/UG 10K Studs Studs '
78205140776 "> 6061 HA =-4 23 "�► x � :..13P1/4W `• . OHNG K -r; Studs l'" tads
78205108698 6967 HAL 400 3 30/4W 01-1_N13 50K Y4 - 600 MCM /4 - 600 MCM
78205111452 6067 H_ALS 40D :' 3 �, + 30/4W + OH/UG `' t 50K 3' =, Studs - ='"1 A -.600 MCM
78205140780 6067 NEE 800 3 ':30/4W .-,OH/UG 50K Studs Studs
600
78 MCM ', /4-600
MCM
Z05101177 rs ra 6067 HEEL
78205111464 6067 HEELS 800 3 30/4W OH/UG 50K Studs 04 - 600 MCM
B-Line
`by+E_T•N'
All lugs accept three (3) wires per phaselneutral
Data subject to change without notice. Consult local utility for area acceptance. All dimensions are in inches.,.
77
Meter Mounting Equipment