BSIG2017-002178-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
Permit Type/Subtype:
Application Number:
Property Address:
APN:
Application Description:
Property Zoning:
Application Valuation:
Applicant: ' .
PD GROUP DBA SIGNARAMA
41945 BOARDWALK SUITE L
PALM DESERT, CA 92211
DESIGN & DEVELOPMENT DEPARTMENT
BUILDING PERMIT
SIGN/
8SIG2017-0021
78445 HIGHWAY 111
604050059
CITY NAILS & SPA / CHANNEL
$3,000.00
JIY 1 0
DEC 14 2017
CiT110FiA puiPrrA
COC1P1� DE,J`, OFhicf 1TO�=FART,,Ic"PIT
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter
9 (commencing with Section 7000) of Division 3, of the Business and Professions Code,
and my License is in full force and effect.
License Cl=14
License No.: 830131
a�/ Connttractor: 1 A
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's -State
License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any
city or county that requires a permit to construct, alter, improve, demolish, or repair
any structure, prior to its issuance, also requires the applicant for the permit to file a
signed statement that he or she is licensed pursuant to the provisions of the
Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division
3 of the Business and Professions Code) or that he or she is exempt therefrom and the
basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for A
permit subjects the applicant to a civil penalty of not more than five hundred dollars
($500).:
(_) I, as owner of the property, or my employees with wages as their sole
compensation, will do the work, and the structure is not intended or offered for sale.
(Sec. 7044, Business and Professions Code: The Contractors' State License Law does not
apply to an owner of property who builds or improves thereon, and who does the work
himself or herself through his or her own employees, provided that the improvements
are not intended or offered for sale. If, however, the building or improvement is sold
within one year of completion, the owner -builder will have the burden of proving that
he or she did not build or improve for the purpose of sale.).
(_) I, as owner of the property, am exclusively contracting with licensed contractors
to construct the project. (Sec. 7044, Business and Professions Code: The Contractors'
State License Law does not apply to an owner of property who builds or improves
thereon, and who contracts for the projects with a contractor(s) licensed pursuant to
the Contractors' State License Law.).
(_) I am exempt under Sec. . B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for
the performance of the work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's Address:
VOICE (760) 777-7125
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Date: 12/13/2017
Owner:
HARSCH INV REALTY
1121 SALMON ST4TH FL
PORTLAND, OR 9.-253
Contractor:
PD GROUP DBA SIuNARAMA
41945 BOARDWALK SUITE L
PALM DESERT, CA92211
(760)776-9907
Llc. No.: 830131
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of -he following declarations
I have and will maintain a certificate of consent to self -insure for workers'
compensation, as provided for by Section 3700 of the Labor Code, for the performance
of the work for which this permit is issued.
I have and will maintain workers' compensation insurance, as required by
Section 3700 of the Labor Code, for the performance of the work for which this permit
is issued. My workers' compensation insurance =arrier and policy number are:
Carrier: ACE AMERICAN INSURANCE COMPANY Policy Number: RWCC64396857 .
_ I certify that in the performance of tl-m work for which this permit is issued, I
shall not employ any person In any manner so a=_ to become subject to the workers'
compensation laws of California, and agree that, if I should become subject to the
workers' compensation provisions of Section 37CO of the Labor Code, I shall forthwith
comply wWjt77MM�V=ppliciint:
ose provisions.
DatDat^Pt
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL,
AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO
ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF
COMPENSATION, DAMAGES AS PROVIDED FOR 111 SECTION 3706 OF THE LABOR CODE,
INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT: Application is hereby made to the Euilding Official for a permit subject to
the conditions and restrictions set forth on this application.
1. Each person upon whose behalf this applicaton is made, each person at whose
request and for whose benefit work is performed'under or pursuant to any permit
issued as a result of this application , the owner, and the applicant, each agrees to, and
shall defend, indemnify and hold harmless the Citj of La Quinta, its officers, agents, and
employees for any act or omission related to the work being performed under or
following issuance of this permit.
2. Any permit Issued as a result of this application becomes null and void if work is
not commenced within 180 days from date of issLance of such permit, or cessation of
work for 180 days will subject permit to cancellati in.
I certify that I have read this application and state that the above information is correct.
I agree to comply with all city and county ordinan=es and state laws relating to building
construction, and hereby authorize representatives of this city to enter upon the
above-ment'oned property for in�spectioon" purposes.
Date: - �,I 7 � ignat5 n ure (Applicant or agent):
9
g
Date: 12/13/2017
Application Number: BSIG2017-0021
Owner:
Property Address: 78445 HIGHWAY 111
HARSCH INV REA-TY
APN: 604050059
1121 SALMON ST 4TH FL
Application Description: CITY NAILS & SPA/ CHANNEL LETTER SIGN
PORTLAND, OR 9.1253
Property Zoning:
Application Valuation: $3,000.00
Applicant:
Contractor:
PD GROUP DBA SIGNARAMA
PD GROUP DBA S GNARAMA
41945 BOARDWALK SUITE L
41945 BOARDWALK SUITE L
PALM DESERT, CA 92211
PALM DESERT, CA 92211
(760)776-9907
--------------------------------------------------------
Llc. No.: 830131 -
---------------------
-
Detail: CITY NAILS & SPA CHANNEL LETTER SIGN. PER 2016 CALIFORNIA BUILDING CODE
---------------
9
g
FINANCIAL
DESCRIPTION ACCOUNT CITY AMOUNT
BSAS SB1473 FEE
101-0000-20306 0 $1.00
Total Paid for BUILDING STANDARDS ADMINISTRATION BSA: $1.00
DESCRIPTION
ACCOUNT
CITY
AMOUNT
DEVICES, FIRST 20
101-0000-42403.
0
$3.25
Total Paid for ELECT3ICAL: $3.25
DESCRIPTION
ACCOUNT
CITY
AMOUNT
RECORDS MANAGEMENT FEE
101-0000-42416
0
$10.00
Total Paid for RECORDS MANAGEMENT FEE: $10.00
DESCRIPTION
ACCOUNT
QTY
AMOUNT
WALL/AWNING SIGN, FIRST
101-0000-42404
0
$53.06
Total Paid for -SIGN: $53.06
DESCRIPTION
ACCOUNT
QTY
AMOUNT,
TECHNOLOGY ENHANCEMENT FEE
502-0000-43611
0
$5.00
Total.Paid for TECHNOLOGY ENHANCEMENIr FEE: $5.00
TOTALS:
0
r
' ~
.............. . ..cLr :,P car tir.k r. . ... ... ...
PERMIT # //l�l/C/ 1 T", Zl
PLAN LOCATION:
Project Address: "� Z ' -b < L� I I
Project Description: Pool, Remodel, Add't, Elect, Plumb, Mech
APN #: v UA , 7i ✓1
1.2� I I�AJ % 1
Patio/Porch SF
Email: 13, r� t✓ PO t .G ,J Q mow) CIS\
Applicant Name:13, LU�
State Lic: C� �G ' City Bus Lic: C1 Iv Sel f
Address: i S i g 'fJ I.,�L
State Lic: City Bus Lic:
City, ST, Zip. P, u",
Telephone: 76 o
Email:` ��ANv,
t �'1-ir. yne' r
Valuation of Project
Contractor Name: 51 G -N �{► �o�
New SFD Construction:
Address: 41, �Lfs a
Conditioned Space SF
Q
City, St, Zip ✓-1- �S'-`'1.L6 (
Garage SF
Telephone: '760 — �7 g _ 6 .S
Patio/Porch SF
Email: 13, r� t✓ PO t .G ,J Q mow) CIS\
Fire Sprinklers SF
State Lic: C� �G ' City Bus Lic: C1 Iv Sel f
05 °-3
Arch/Eng Name:
Construction Type: Occupancy:
Address:
Grading:
City, St, Zip
Construction Type: Occupancy:
Telephone:
Bedrooms:
Stories:
# Units:
Email:
State Lic: City Bus Lic:
Property Owner's Name:
New Commercial / Tenant Improvements:
Address: -5 V G�' G �7t� /-� qA, f �
Total Building SF
City, ST, Zip u y 23
Construction Type: Occupancy:
Telephone:
E-mail:
78495 CALLE TAMPICO
LA QUINTA, CA 92253
760-777-7000
OFFICE USE ONLY
Submittal
Req'd
-Rec'd'
Plan Sets
Structural Calcs
Truss Calcs
Title 24 Calcs
Soils Report
Grading Plan (PM 10)
Landscape Plan
Subcontractor List -
Grant Deed
HOA Approval
School Fees
Burrtec Debris Plan
Planning approval
Public Works approval
Fire approval
City Business License
STATE OF CALIFORNIA
-'SIGN LIGHTING
CEC-NRCC-LTS-01-E Revised 08)16
CERTIFICATE OF COMPLIANCE
Sign Lighting
L, S
CALIFORNIA ENERGY
Dace Prepared: %
• s
AMISSION
N RCC-LTS-01-E
(Page 1 of S)
A. General Information
NOTES:
Project Address: -��—. y�� / )� / � L'
/ � � Gti�/ �,.�i�'•� �
2. The Mandatory Measures (sign lighting controls) ore required for compliance with the sign ligh'ing Standards. If the person
responsible for installing the sign lighting power is not also responsible for the sign lighting control, then the owner of the sign,
Location of Sign -k—Outdoor Signs
❑ Indoor Signs
Phase of Sign Construction New Signs
C] Sign Alterations
Type of Lighting Control 10 New Lighting Controls
❑ Replaced Lighting Controls ❑ Not Installing Lighting Controls
This Certificate of Compliance includes the following components
(check all that apply):
❑ Mandatory Measures (Lighting Controls) ❑ Maximum Allowed Lighting Power ❑ Specific Lighting Sources
1. Mandatory Sign Lighting Controls
NOTES:
1: The same responsible person may install both the sign lighting power and the sign lighting controls, or a different responsible
person may install. the sign lighting controls than the responsible person installing the sign lighting power.
2. The Mandatory Measures (sign lighting controls) ore required for compliance with the sign ligh'ing Standards. If the person
responsible for installing the sign lighting power is not also responsible for the sign lighting control, then the owner of the sign,
general contractor, or architect shall be responsible to have the sign lighting controls installed.
3. if more than one person has responsibility for compliance, each responsible person shall prepare and sign a Certificate of
Compliance and an Installation Certificate applicable to the portion of construction for which they are responsible; alternatively,
the person with chief responsibility for construction shall prepare and sign the Certificate of Compliance Declaration Statement
for the entire construction (e.g. a C-10 contractor may complete parts la and lb on -one comp•'iance document and a C-45
contractor may complete parts 2a and 2b on a separate compliance document — the Responsible Designer shall submit the two
compliance documents together for the some complete installation).
I Fjave responsibility for installing the sign lighting controls:
Yes, I have responsibility for the sign lighting controls, and will ❑ No, I do not have responsibility for installing the sign lighting controls.
complete parts la and lb of this compliance document Someone else will complete parts la and lb o- this compliance document.
la. Check Yes or No for all of the following statements:
1
There are existing sign lighting controls that comply with the applicable provisions of §110.9 and §1.30.3
❑ Yes no
There are no existing sign lighting controls and 1 will be installing sign lighting controls that comply with the applicable
2
provisions of §110.9 and §130.3
1--,
❑ Yes ❑ No
There are existing sign lighting controls that do not comply with the applicable provisions of §110.9 and §130.3 and I will be
3
installing sign lighting controls that comply with the applic provisions of §110.9 and §130.3
❑ Yes No
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance August 2016
STATE OF CALIFORNIA
SIGN LIGHTING .
CEC-NRCC-LTS-01-E(Revised 08/16)
CERTIFICATE OF COMPLIANCE
Sign Lighting
Project Nomo:
ENERGY COMMISSION a
N RCC-LTS-01-E
(Page 2 of 5)
1b. Mandatory Sign Lighting Controls
If the person signing the Certificate of Compliance Declaration Statement on this NRCC-LTS-01-E is responsible for complying with
the sign lighting control requirements, that person shall answer all of the following questions:
If there are construction documents, indicate where on the building plans the
mandatory measures (sign lighting control) note block can be located:
1 §130.3(a)1. All indoor sign lighting is controlled with an automatic time -switch control or astrono.rical time-
Y N NA
switch control.
O O
§130.3(a)2A. All outdoor sign lighting is controlled with a photocontrol in addition to an automatic time
Y N NA
2 switch control, or an astronomical time -switch control.O
O
EXCEPTION to Section
130.3(a)2A: Outdoor signs in tunnels, and signs in large permanently cover?d outdoor
Y
NA
areas that are intended to be continuously lit, 24 hours per day and 365 days per year.
O
§130.3(a)28. All outdoor sign lighting that iS ON both day and night is controlled with a dimmer twat provides
the ability to automatically reduce sign lighting power by a minimum of 65% during nighttime hou.-s. Signs that
are illuminated at night and'for more than 1 hour during
Y
N
NA
3
daylight hours shall be -considered ON bo:h-day and
night.
O
O
EXCEPTION to Section 130.3(a)2B: Outdoor signs in tunnels and large covered areas that are intended to be
Y
N
illuminated both day and night.
O
§130.3(a)3. Demand Responsive Electronic Message -Center Control. An Electronic Message Center (EMC)
having a new connected lighting power load than
YN
4
greater 15 kW has a control installed that is capable of
reducing the lighting power by a minimum of 30% when receiving a demand response signal.
O
O
N/A
EXCEPTION to Section 130.3(a)3: Lighting for EMCs that is not permitted by a health or life safety :.tatute,
ordinance, or regulation to be reduced by
Y
NA
Field
30%.
Inspector Notes:
O
:yam
lAr
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance
August 2016
STATE OF CALIFORNIA
SIGN LIGHTFNG
CEC-NRCC-LTS-01-E(Revised 08/16)
CERTIFICATE OF COMPLIANCE
Sign Lighting
vraiea name: b
ENERGY COMMIAgInN 46
NRCC-LTS-01-E
(Page 3 of 5)
2. Mandatory Sign Lighting Measures
I have responsibility for installing the sign lighting
❑ Yes, I have responsibility for the sign lighting, and will complete ❑ No, I do not have responsibility for installi'hg the sign lighting. Someone
parts 2a and 2b of this compliance document else will complete parts 2a and 2b of this compliance document.
2a. Maximum Allowed Lighting Power Method of Compliance
Certificate of Compliance and Field Inspection Energy Checklist.
Complete this part if there are signs using the maximum allowed lighting power method of compliance. ;Complete part 2b of this
Certificate of Compliance if there are signs using the Specific Lighting Sources method of compliance),
A B C D E F G H I 1
Field
OPTIONAL —
Symbol or Energy Verified Field
Code
Description of the Sign Label (see Allotted Watts Design Complies Inspector
instructions Watts Y/N Check that
below) Sign Complies
0
N
_ UJw .i.-' N � VI
>� 0. d M x
C c r.E a)m '13 x c
` HoC0 N x II II p y .a
In C W _ a v Q 0 E
1'2-
L`� ❑ 0 ❑
❑ 0 i ❑
❑ 0 ❑
❑ D ❑
❑ D O
I
❑ 0 ❑
❑ 0 ❑
❑ o ❑
A Symbol or code used on the plans (when plans are required) and other documents.
B A description of the sign, or location of sign on the building; and the location of sign on construction documents.
OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory -installed, ENERGY VERIFIED label, confirming that
the sign complies with the Section 140.8 of the California 2016 Title 24, Part 6 Standards, using the Maximum Allowed Lighting
Power method of compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks
C authorized by Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO;IEC Guide 65 by the American
National Standards Institute in accordance with ISO/IEC 17011. Surveillance by the Accredited Certi-ication Body shall be an
ongoing annual inspection program carried out by a Type A Inspection body in accordance with ISO; IEC 17020. For signs with such
an ENERGY VERIFIED label, columns 'D' through 'I' are not required to be filled out. Note: Using an ENERGY VERIFIED label is an
optional method to validate compliance. An ENERGY VERIFIED label is not needed for compliance.
D The sign area in square feet.
E List "I" if the sign is internally illuminated. List "E" if the sign is externally illuminated.
F Allowed watts per square foot. Enter 12 if the sign is listed as "I" in column E. Enter 2.3 if sign is listed as "E" in column E.
G Multiply the square footage in column D times the allowed Lighting Power Density (LPD = watts) in column F.
H Show the total installed watts in the sign, as determined according to the applicable provisions of §:30(c).
Enter Y if the number in column H is less than or equal to the number in column G. Otherwise, the 9gn does not comply:
1 I This page doubles as a field inspection checklist.
Inspector Notes:
CA Building Energy Efficiency Standards . 2016 Nonresidential Compliance
August 2016
STATE OF CALIFORNIA
SIGN LIGHTING
CERTIFICATE OF COMPLIANCE
Sign Lighting
Project Name:
Date vrepareC:
6 ENERGY COMmm.gintj
NRCC-LTS-OS-E
(Page 4 of 5)
2b. Specific Lighting Source Method of Compliance
Certificate of Compliance and Field Inspection Energy Checklist
Complete this part if there are signs using the Specific Lighting Source method of compliance. (Complete part 2 of this Certificate of
Compliance if there are signs using the maximum allowed lighting power method of compliance)
A B C. D E
OPTIONAL
ENERGY Specific light source used for
Symbol VERIFIED compliance Field Inspector
or Description label Shall include only lighting Check that Sign
Code (see technologies listed below' Complies
instructions (list all that app.y)
below)
❑ ❑
❑ ❑
El ❑.
A Symbol or code used on the plans (when plans are required) and other documents.
B A narrative description of the sign, or location of sign on the building; and the location of sign on construct on documents
OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory -installed ENERGY VERIFIE ) label, confirming that this sign
complies with the Section 140.8 of the California 2016 Title 24, Part 6 Standards, using the Specific Lighting -Source Method of Compliance.
The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized by Underwriters Laboratories
C (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National Standard: Institute in accordance with
ISO/IEC 17011. Surveillance by the Accredited Certification Body shall be an ongoing annual inspection program carried out by a Type A
Inspection body in accordance with ISO/IEC 17020. For signs with such an ENERGY VERIFIED label, column ')' is not required to be filled
out. Note: Using an ENERGY VERIFIED label is an optional method to validate compliance. An ENERGY VERIFIED label is not needed for
compliance.
Specific Light Source Compliance Method. The sign(s) identified above use only the following lighting technologies:
List all applicable numbers (1 through 9) that apply in column D above for each row.
1 High pressure sodium lamps
Metal halide lamps that are pulse start or ceramic served by a ballast that has a minimum ef=iciency of 88% or greater.
2 Ballast efficiency is the measured output wattage to the lamp divided by the measured operating input wattage when
tested according to ANSI C82.6-2005.
Metal halide lamps that are pulse start that are 320 watts or smaller, are not 250 watt or 175 watt lamps, and are
3 served by a ballast that has a minimum efficiency of 80%.
Ballast efficiency is the measured output wattage to the lamp divided by the measured operating input wattage when
tested according to ANSI C82.6-2005.
D Neon or cold cathode lamps with transformer or power supply efficiency greater than or equal to a mirimum efficiency of 75% when
4 the transformer or power supply rated output current is less than 50 mA. The ratio of the output wattage to the input wattage is at
100% tubing load.
Neon or cold cathode lamps with transformer or power supply efficiency greater than or equal to a minimum efficiency of 68% when
5 the transformer or power supply rated output current is 50 mA or greater. The ratio of the output wattage to the input wattage is at
100% tubing load.
6 s Fluorescent lighting systems meeting one of the following requirements: A.) Use only lamps with a minimum color rendering index
(CRI) of 80; or B,) Use only electronic ballasts with a fundamental output frequency not less than 20 kHz.
7 Light emitting diodes (LEDs) with a power supply having an efficiency of 80% or greater.
Single voltage external power supplies that are designed to convert 120 volt AC input into lower voltage DC or AC output, and have a
8 nameplate output power less than or equal to 250 watts, shall comply with the applicable requirements of the Appliance Efficiency
Regulations (Title 20).
9 Compact fluorescent lamps that do not contain a medium screw base sockets (E24/E26).
E This page doubles as a field inspection checklist.
Field Inspector Notes:
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance
August 2016
STATE OF CALIFORNIA
SIGN LIGHTPNG
CERTIFICATE OF COMPLIANCE
Sign Lighting .
Project Name:
0.1 %:, 7
04e Prepared:
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. - I certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name: /'-14 tt f Documentation Author Signature:
ac
OMISSION 0
NRCC-LTS-01-E
(Page 5 of 5)
Company: <--�—
�� Signature Date. ;
Address: - )q 1-7
CEA Certlrication Identification (if app icabl=):
City/State/Zip:
L W� Phone:
P rtn.� C, ZZ l l --/0 - 6
RESPONSIBLE PERSON'S DECLARATION STAfEMENT
I certify the following under penalty of perjury, under. the laws of the State of California:
I. The information provided on this Certificate of Compliance is true and correct.
2. I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building d !sign or system design identified
on this Certificate of Compliance (responsible designer).
3: The energy features and performance specifications, materials, components, and manufactured devices for the building design or system
design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 Df the. California Code of
Regulations.
4. The building design features or system design features identified on this Certificate of Compliance are consistent with the information
provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement
agency for approval with this building permit application.
S. I will ensure that a completed signed copy of this Certificate of Compliance shall be made available with the tuilding permit(s) issued for the
building, and made available to the enforcement agency for all applicable inspections. I understand that a completed signed copy of this
Certificate of Compliance is re uired to be included with the documentation the build
Responsible Designer Name: er erovides to thp buildling owner at occupancy.
k�L
J / Responsible Designer Signature:
Company:
Address
Irk
r
L
Date Signed:
-2-11`&-7
-
license:
Phone: / � a
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance ,
August 2016
204.7 "
F
30" Spk4"
L NAMLS&
White acrylic w/ blue routed out letter vinyl Black trim and returns
Red acrylic faces
Illuminated
Acrylic Faced Channel Letters
Depth: 3.5"
Face Color: Red / Blue / White
Return Color: Black
Trim Cap Color: Black
Mounting: Back
Standoff: Flush
CHANNEL LETTER & LIGHT BOX SECTION
INTERNALLY ILLUMINATED L.E.D.
3.5",040 ALUMINUM
/ RETURNS
I TRIMCAP
ACRYLIC FACES
LE,D, MODULE
LOW VOLTAGE WIRE
WIRE NUTS
EACH LETTER FASTENED BY A
MINIMUM OF 4 #10 SCRFWS
WITH STUCCO APPROVED
ANCHORS
,#8 SHEET METAL SCREW
ALL WALL PLNE IRA]IONS TO BE SEA[ ED WITH UL LISTED SILICONE SEALANT
U.L. 48
NEC ELECTRICAL CODE 2010
THI5 SIGN 15 INTENDED TO BE IN5TALLED IN ACCORDANCE WITH REQUIREMENTS OF
ARTICLE 600 ON THE NATIONAL ELECTRIC CODE AND OR OTHER APPLICABLE LOCAL CODE5.
TH15 INCLUDES PROPER GROUNDING AND BONDING OF THE SIGN.
CHANNEL LETTER CONNECTION DETAIL_POWERHOU5E
TRANSFORMER
MOUNTING TUCTURE
CHANNEL LETTER CHANNEL LETTER CHANNEL LETTER CHANNEL LETTER CHANNEL LETTER
U.L. LISTED AND LABELED
COMPLIES WITH 2013 CA ELECTRIC CODE, ARTICLE 600
Frontage: 50 Linear Feet
Customer:
Telephone: 760-771-4672
Jobsite: Customer Approval:
-
City Nails & Spa
Fax: 760-xxx-xxm
Same
Address:
78-445 Hwy 111
Landlord Approval:
fi-
Total Signage 42.6 S.F.
La Quinta, CA 92253
East ELEVATION
SIGN*A*RAMA
Contractors LIC # 830131 C45, C61/D42
Dwg. No.: 87949
Rev : 1
YOUR SIGNATURE ACKNOWLEDGES FULL APPROVAL OF DESIGN CONTENT
Workers Com #1938807
p'
Date: 12-5-17
AND LAYOUT, RELEASING SIGN*A*RAMA FROM RESPONSIBILITY IN REGARD
TO INCORRECT DESIGN AND INFORMA TION. THE COLORS SHOWN ARE ONLY
REPRESENTATIVE OFACTUAL PMS COLOR CALL OUTS. FINAL COLOR WILL
41-945 Boardwalk, Ste. L
GA
Palm Desert CA. 92211
Designer.
9
BE MATCHED AS CLOSEAS POSSIBLE, COMMENSURATE WITH MATERIALS USED.
PH 760-776-9907 • FX 760-776-9844
City Llc. #97005491
Salesperson: BS
THIS DESIGN IS PROPRIETARY PROPERTYAND MAY NOT BE USED WITHOUT
THE EXPRESSED WRITTEN CONSENT OF SIGN*A*RAMA.