BSIG2017-000178-495 CALLE TAMP`ICO
LA QUINTA, CALIFORNIA 92253
DESIGN & DEVELOPMENT DEPARTMENT
BUILDING PERMIT
VOICE (760)777-7125
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Date: 1/9/2017
Application Number:
Property Address:
APN:
Application Description
Property Zoning:
Application Valuation:
BSIG2017-0001 Owner:
78474 HIGHWAY 111 RICK WILKERSON
604050041 370 HIGHWAY ill
BELLA NAILS ON MONUMENT SIGAPPY Q ® QUINTA, CA 92253
$1,500.00 01D
JAN p 9 2011
Applicant: ontractor:
PD GROUP DBA SIGNARAMA PD GROUP DBA SIGNARAMA
41945 BOARDWALK SUITE L CI� OF �AQUINTA ' BOARDWALK SUITE L
PALM DESERT, CA 92211 PALM DESERT, CA 92211
DESIGN AND DEVELOPMENT DEPART(
(760)776-9907
Llc. No.: 830131
LICENSED CONTRACTOR'S DECLARATION I WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter
I hereby affirm under penalty of perjury one ofthe following declarations: '
9 (commencing with Section 7000) of Division 3 of the Business and Professions Code,
I have and will maintain a certificateof consent to self -insure for workers'
and my License is in full force and effect.
compensation, as provided for by Section 3700of the Labor Code, for the performance
License Clas •D42 C45 License No.: 830131
of the work for which this permit is issued.
�J �1 a
I have and will maintain workers' compensation insurance, as required by
Date's)`" % ` C'Contr/ 1 , 7
Section 3700 of the Labor Code, for the performance of the work for which this permit
is issued. My workers' compensation insurance carrier and policy number are:
OWNER -BUILDER DECLARATION
Carrier: STATE COMPENSATION INSURANCE FU JD Policy Number: 9111087
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State
License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any
I certify that in the performance of the work for which this permit is issued, I
city or county that requires a permit to construct, alter, improve, demolish, or repair
shall not employ any person in any manner so as to become subject to the workers'
any structure, prior to its issuance, also requires the applicant for the permit to file a
compensation laws of California, and agree that, if I should become subject to the
signed statement that he or she is licensed pursuant to the provisions of the
workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith
Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division
comply with those provisions:
3 of the Business and Professions Code) or that he or she is exempt therefrom and the
basis for the alleged exemption. Any violation of Section 7031.5 by any applicant fora
Date:_ O / d r -Applicant: -
permit subjects the applicant to a civil penalty of not more than five hundred dollars
J p
($500).:
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL,
(� I, as owner of the property, or my employees with wages as their sole
AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO
compensation, will do the work, and the structure is not intended or offered for sale.
ONE HUNDRED THOUSAND DOLLARS ($100,00Qi. IN ADDITION TO THE COST OF
(Sec. 7044, Business and Professions Code: The Contractors' State License Law does not
COMPENSATION, DAMAGES AS PROVIDED FOR <N SECTION 3706 OF THE LABOR CODE,
apply to an owner of property who builds or improves thereon, and who does the work
INTEREST, AND ATTORNEY'S FEES.
himself or herself through his or her own employees, provided that the improvements
are not intended or offered for sale. If, however, the building or improvement is sold
APPLICANT ACKNOWILEDGEMENT
within one year of completion, the owner -builder will have the burden of proving that
IMPORTANT: Application is hereby made to the:Building Official for a permit subject to
he or she did not build or improve for the purpose of sale.).
the conditions and restrictions set forth on this application.
( ) I, as owner of the property, am exclusively contracting with licensed contractors
1. Each person upon whose behalf this application is made, each person at whose
to construct the project. (Sec. 7044, Business and Professions Code: The Contractors'
request and for whose benefit work is performed under or pursuant to any permit .
State License Law does not apply to an owner of property who builds or improves
issued as a result of this application , the owner, and the applicant, each agrees to, and
thereon, and who contracts for the projects with a contractor(s) licensed pursuant to
shall defend, indemnify and hold harmless the Oty of La Quinta, its officers, agents, and
the Contractors' State License Law.).
employees for any act or omission related to the work being performed under or
(� I am exempt under Sec. . B.&P.C. for this reason
following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is
not commenced within 180 days from date of issuance of such. permit, or cessation of
Date: Owner:
work for 180 days will subject permit to cancellation.
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for
the performance of the work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Na
Lender's
I certify that I have read this application and state that the above information is correct.
I agree to comply with all city and county ordinances and state laws relating to building
construction, and hereby authorize representati+es of this city to enter upon the
above -menti sed property for inspection purposes.
Date 9 )7—Signature-(Applicant or Agent):
Dater 1/9/2017
Application Number: BSIG2017-0001
Owner:
. Property Address: 78474 HIGHWAY 111
RICK WILKERSON
APN: 604050041
78370 HIGHWAY 111
Application Description: BELLA NAILS ON MONUMENT SIGN POINT HAPPY
LA QUINTA, CA 9253
Property Zoning:
Application Valuation: $1,500.00
Applicant:
Contractor:
PD GROUP DBA SIGNARAMA
PD GROUP DBA S13NARAMA'
41945 BOARDWALK SUITE L
41945 BOARDWALK SUITE L
PALM DESERT, CA 92211
PALM DESERT, CA92211
(760)776-9907
-----------------------------------------------------------------------------------------------
Llc. No.: 830131
Detail: (2) CHANNEL LETTER LED SIGNS ATTACHED TO MONUMENT SIGN AT POINT HAPPY [BELLA NAILS] SIGN PERMIT NC. 2016--0072 [CF] 2016 ENERGY,
.2016 CALIFORNIA BUILDING CODES.
DESCRIPTION ACCOUNT IQTY AMOUNT .
BSAS SB1473 FEE 101-0000-20306 0 $1.00
Total Paid for BUILDING STANDARDS ADMINISTRATIO[' BSA: $1.00
DESCRIPTION
ACCOUNT
QTY
AMOUNT
DEVICES, FIRST 20
101-0000-42403
0
$25.33
DESCRIPTION
ACCOUNT
QTY
AMOUNT
DEVICES, FIRST 20 PC
101-0000-42600
0
$25.33
Total Paid for ELECTF.ICAL: $50.66
DESCRIPTION
ACCOUNT
QTY
AMOUNT
WALL/AWNING SIGN, FIRST
101-0000-42404
0
$25.84
DESCRIPTION
ACCOUNT
QTY
AMOUNT
WALL/AWNING SIGN, FIRST PC
101-0000-42600
'0
$91.20
Total Paid for SIGN: $117.04
Bin #
Permit; ✓
Project Address:
City of fa Quinta
Building a Safety Division
78-495 Calfe Tampico
La Quinta, CA 92253 - ('760) 777-701,2
Building Permit Application and Tracking Sheet
IWAII ( Owner's Name:
A. P. Number: 3,
Address: P�7 7 o
Legal Description:
City, ST, Zip: LG—
ontract r: S—
—/
C�
Telephone:Address:
�1 ��
Project Description: fic, vfL� C
City, ST, Zip: PA U vV%
Telephone: O 7 6 0
1 l`
State Lic. # : 83c)
City Lie. #.-f 76D 9/
Arch., Engr., Designer:
Address:
City, ST, Zip:
Telephone:
atmY.
traction Type: Occupancy:
P
Lic. #.
ProJ Repair Demo
�ect nPa circle one AddnAIt-Stale
Name of Contact Person:
Sq. Ft-:
# Stories:
URe�ts:
Telephone # of Contact Person:
Estimated Value of Project:
# Submittal Req'd
APPLICANT: DO NOT WRITE BELOW THIS LINE
Rcc'd TRACKING PERMIT FEES
Plan Sets
Plan Check submitted
Item
Amount
Structural Calcs.
Reviewed, ready for corrections
Plan Check Deposie
Truss Calcs.
Called Contact ;person
Platt Check Balance.
Title 24 Calcs.
Plans picked up
Construction '
Flood plain plan
Plans resubmitted
Mechanical
Grading plan
2" Review, ready for corrcctionsfissue
Electrical
Subcontact'or List
Called Contact Person
Plumbing
Grant Dccd
Plans picked up
S.M.I.
H.O.A. Approval
Plans resubmitted
Grading
IN ROUSE:-
Review, ready for corrections/issue
Developer Impact Pee
Planning Approval
Called Contact Person
A.I.P.P.
Pub. Wks. Appr
Date of permit issue
School Fees,
Total Permit Fees
LS
83 -701V w ll 1 Z-At,, r�L
.Pon of gn Outdoor Signs
❑Indoor Signs
se of Sign Construction MZNew Signs
e of Lighting Control j4c 1ur(l Q New Lighting Controls
D Sign Alterations
O Replaced Lighting Controls D Not Installing Lighting Controls
; Certificate of Compliance Includes the following co
nponents (check all that,apply)
Mandatory Measures (Lighting Controls) O Miaxi
um Allowed Lighting Power O Specific Lighting Sources
Mandatory Sign Lighting Controls
)TES:
The some responsible person may install both
the sign lighting power and the sign lighting controls, or, a different responsible
person moy install the sign lighting controls t
on the responsible person insto/ling the sign lighting powe:.
The Mandatory Measures (sign lighting con
rots) are required for compliance with the sign lighting Standards. If the person
responsible for installing the sign lighting pot
ver is not olso responsible for the sign lighting controls, the1n the owner of the sign,
general contractor, or architect shall be responsible
to have the sign lighting controls installed.
If more than one person has responsibility
for compliance, each responsible person shall prepare a-Id sign a Certificate of
Compliance and on Installation Certificate applicable
to the portion of construction for which they are responsible; alternatively,
the person with chief responsibility for const
uction shall prepare and sign the Certificate of Compliance Declaration Statement
for the entire construction.
Statements of Responsibility: Any person signing
the Certificate of Compliance Declaration Statement on this NRCC-LTS-01-E
all complete Part la. Check Yes or No for all of
Lhe following statements:
I have responsibility for installing the sign lighting
controls
I Yes, complete parts la and lb of this form
O No, complete part la of this form
There are no existing sign lighting controls atid
I will be installing compliant sign lighting controls
,El Yes
O No
There are no existing sign lighting controls a
d someone else will be responsible to install compliant sign lighting controls
Yes
O No
There are existing sign lighting controls that
Jo not comply with the applicable provision of §110.9 and 4130.3 and I.will be
installing compliant sign lighting controls
O Yes
IS No
There are existing sign lighting controls that
Jo not comply with the applicable provision of §110.9 and 3130.3 and someone
else will be responsible to install compliant sign
lighting controls
O Yes
No
iuilding Energy Efficiency Standards - 2013 Nonresid ndal Compliance June 2014
ivlanda'tory Sign lighting Controls
h? percon signing the Certificate of Compliance
Declaration Statement on this NRCC-LTS-01-E is responsiVe for complying with
sign lighting control requirements, that perso
i shall answer all of the following questions:
here are construction documents, indicate where
on the building plans the
indatory measures (sign lighting control) note I
ilock can be located:
§130.3(a)l. All Indoor sign lighting is control
ed with an automatic time -switch control or astronomical time-
Y
N
NA
switch control.
❑
m
❑
§130.3(a)2A. All outdoor sign lighting is controlled
with a photocontrol in addition to an automatic time-
Y
N
NA
switch control, or an astronomical time -switch
control.
❑
❑
EXCEPTION to Section 130.3(a)2A: Outdoor
signs in tunnels, and signs in large permanently covered outdoor
Y
NA
areas that are intended to be continuously I
t, 24 hours per day and 365 days per year.
❑
§130.3(a)28. All outdoor sign lighting that is
ON both day and night is controlled with a dimmer that provides
the ability to automatically reduce sign lighting
power by a minimum of 65 percent during nighttime hours.
Y
N
NA
Signs that are illuminated at night and form
re than 1 hour during daylight hours shall be considered ON both
❑
❑
b
day and night.
EXCEPTION to Section 130.3(a)2B: Outdoor
igns in tunnels and large covered areas that are intended t.:) be
Y
NA
illuminated both day and night.
1 ❑
§130.3(a)3. Demand kesponsive Electronic
Message Center Control. An Electronic Message Center (EMC)
Y
N
N/A
having a new connected lighting power load
greater than 1S kW has a control installed that is capable of
❑
❑
reducing the lighting power by a minimum or
30 percent when receiving a demand response signal.
EXCEPTION to Section 130.3(a)3: Lighting for
EMCs that is not permitted by a health or life safety statute,
Y
NA
ordinance, or regulation to be reduced by 31
percent.
❑
Id Inspector Notes:
uilding Energy Efficiency Standards - 2013 Nonresidential Compliance lune 2014
Jla..irn jyR Allowed LightingPower Method of ompliance
tificate of Compliance and Field Inspection Energy Checklist
Complete this part if there are signs using the maximum allowed lighting power method of complianc=e. (Complete part 3 of
this Certificate of Compliance if there are signs using the Specific lighting sources method of complia-)ce)
A
B
I
D E F G
H
I
J
ymbol
OPTIONAL— Ener y
Complies
Filed Inspector
r Code
Description or the Sign
Verified label (se .
Allotted Watts
Desl�n Wats
Y/N
Check that sign
instructions belo )
complies
_0
C
N
%A
N
v
v T t0
ra c
J` 3
�
3 LL
-0 x
✓
C
`=
N
iOl
O •� N
0 a
..`O..
rp 1;
in
XX
c
Qvw
a
q
I- 3
E
0
eV�s e, 0N.
❑
f ,
) 2-
v
❑
Lam, <, ---
D
❑
❑
❑
❑
❑
❑
,❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
A
Symbol or code used on the plans (when pL ins are required) and other documents.
B
A description of the sign, or location of sign on the building: and the location of sign on construction documen s.
OPTIONAL - Check this box only if this sign I as a permanent, pre-printed, factory -installed, ENERGY VERIFIED label, confirming that the
sign complies with the Section 140.8 of the California 2013 Title 24, Part 6 Standards, using the Maximum Allowed Lighting Power
method of compliance. The only labels tha will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized by
C
Underwriters Laboratories (UL) or other Prc duct Certification Body accredited to ISO/IEC Guide 65 by the Ame•ican National Standards
Institute in accordance with ISO/IEC 17011. Surveillance by the Accredited Certification Body shall be an ongoi-Ig annual inspection
program carried out by a Type A Inspection body in accordance with ISO/IEC 17020. For signs with such an ENERGY VERIFIED label,
columns 'D' through'I' are not required to lie filled out. Note: Using an ENERGY VERIFIED label is an optional method to validate
compliance. An ENERGY VERIFIED label is not needed for compliance.
D
The sign area in square feet.
E
List "I" if the sign is internally illuminated. List "E" if the sign is externally illuminated.
F
Allowed watts per square foot. Enter 12 if, he sign is listed as "I" in column E. Enter 2.3 if sign is listed as "E" in column E.
G
Multiply the square footage in column D tir ies the allowed Lighting Power Density (LPD = watts) in column F.
H
Show the total installed watts in the sign, a determined according to the applicable provisions of §130(c).
I
Enter Y if the number in column H is less th n or equal to the number in column G. Otherwise, the sign does not comply.
1
This page doubles as a field inspection chec dist.
I Inspector Notes:
uilding Energy Efficiency Standards - 2013 Nonresi
ntial Compliance
June 2014
$pgci_fic LiRhtinQ Source Method of Compliance e�3 LSA l v C.LS
!reificate- of Compliance and Field Inspection E iergy Checklist
Complete this part if there are signs using the Specific lighting source method of compliance. (Complete part 2 of this Certificate
of Compliance if there are signs using themaximum allowed
lighting power method of compliance)
A
B
C
D
E
OPTIONAL
Specific light source used for
Field Inspector
ymbol
ENERGY VERIFIED
compliance
Check that Sign
or
Description
label
Shall include only lighting;
Complies
Code
(see instructions
technologies listed below
below)
list all that apply
D
�
O
�
O
�
O
0
Symbol or code used on the plans (when plans are required) and other documents.
A narrative description of the sign, or location of stn on the building; and the location of sign on construction documents
OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory -installed ENERGY VERIFIED label, confirming that this sign
complies with the Section 140.8 of the California 013 Title 24, Part 6 Standards, using the Specific Lighting Source Method of Compliance. The
only labels that will be recognized for this purposf are ENERGY VERIFIED Certification Marks authorized by Underwriters Laboratories (UL) or
other Product Certification Body accredited to IS IEC Guide 65 by the American National Standards Institute in aeordance with ISO/IEC
17011. Surveillance by the Accredited Certificatioi i Body shall bean ongoing annual inspection program carried out by a Type A Inspection body
in accordance with ISO/IEC 17020. For signs with uch an ENERGY VERIFIED label, column 'D' is not required to be filled out. Note: Using an
ENERGY VERIFIED label is an optional method to validate compliance. An ENERGY VERIFIED label is not needed for Compliance.
Specific Light Source Compliance Method. The si n(s) identified above use only the following lighting technologies
List all applicable numbers (1 through 9) that app in column D above for each row.
2
High pressure sodium tamps
Metal halide lamps that are pulse start or ceramic served by a ballast that has a minimum efficiency of 88 percent or
2
greater. Ballast efficiency is the measured output wattage to the lamp divided by the measured operating input wattage
when tested according to ANSI 082.6-2 05.
Metal halide lamps that are pulse start that are 320 watts or smaller, are not 250 watt or 175 watt gamps, and are served by
a ballast that has a minimum efficiency of 80 percent.
3
Ballast efficiency is the measured outpu wattage to the lamp divided by the measured operating i-iput wattage when tested
according to ANSI C82.6-2005.
Neon or cold cathode lamps with transform r or power supply efficiency greater than or equal to a minimum efficiency of 75 percent
4
when the transformer or nower supply ratec output current is less than 50 mA. The ratio of the output wattage to the input wattage is at
100 percent tubing load.
Neon or cold cathode lamps with transformi r or power supply efficiency greater than or equal to a minimum efficiency of 68 percent
5
when the transformer or power supply rate output current is 50 mA or greater. The ratio of the output watt age to the input wattage is at
100 percent tubing load.
Fluorescent lighting systems meeting one of the following requirements: A. Use only lamps with a minimum color rendering Index (CRI) of
6
80; or B. Use only electronic ballasts with a f indamental output frequency not less than 20 kHz.
7
Light emitting diodes (LEDs) with a power supply having an efficiency of 80 percent or greater;
Single voltage external power supplies that i re designed to convert 120 volt AC input into lower voltage DC or AC output, and have a
8
nameplate output power less than or equal 1 o 250 watts, shall comply with the applicable requirements of the Appliance Efficiency
Regulations (Title 20).
9
Compact fluorescent lamps that do not cont in a medium screw base sockets (E24/E26).
This page doubles as a field inspection checklist.
ield Inspector Notes:
Building Energy Efficiency Standards - 2013 Nonresidential Compliance June 2014
W
r
` e
]Ct+CtJM -NTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance
Jocvmehtation is accurate and complete.
>ne'Gmentation Authof Name:
3 L-1— S
Documentation Author Signatur
:ompany: n
Signature Dale:
sddress:
CEA/ HERS Certification Identification (if a plicable):
:i;y/State/Zip:
Phone:
RESPONSIBLE PERSON'S DECLARATION STATEMEN
I certify the following under penalty of perjury,
under the laws of the State of California:
1. The information provided on this Certificate of
ompliance is true and correct.
2. 1 am eligible under Division 3 of the Business and
Professions Code to accept responsibility for the building design, or system design
identified on this Certificate of Compliance (res
onsible designer).
3. The energy features and performance specifica
ions, materials, components, and manufactured devices for the building design or system
design identified on this Certificate of Complia
ce conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
4. The building design features or system design features
identified on this Certificate of Compliance are consistent with the information
provided on other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to the enforcement
agency for approval with this building permit application.
5. 1 will ensure that completed signed copy of this
Certificate of Compliance shall be made available with the building permit(s) issued for the
building, and made available to the enforcement
agency for all applicable inspections. I understand that a compLted signed copy of this
Certificate of Compliance is required to be incl
ded with the documentation the builder provides to the building;owner at occupancy.
Responsible Designer Name:—Responsible
�
cj rz c ,.) e
Designer Signature:
Company:
Date Signed:
Address:License:
�..+(9�aS� 13o>aR,�t,.�;�-c-1C
vlrG I!
'j-830 .
City/State/Zip:
Pqi�, ()E:! GP—T- Ct4 Z
(l
phone: -
coO Q- Ll tiG
Building Energy Efficiency Standards - 2013' Nonres
dential Compliance June 2014
42"
coI—BELLA NAILS
Internally Illuminated
Reverse Channel Letters
Depth: 3"
Face Color: Red
Return Color: Red
Mounting: Back
-
Standoff: 1.5"
L.E.D. Color: Red
• us -18,
.Y fr
LLA. NART�
1' a.
lvt
�.
qK fJ
'
siTotal Signage 1.8 S.F.g garama- Contractors Lic # 830131 C45, C61/D42
The way to grow your business.
41945 BOARDWALK, SUITE L Workers Comp. # 1938807
PALM DESERT, CA 92211
PH 760.776.9907 / FX 760.776.9844 City Lic. #97005491
j —_—
Ty OF
I SO DIIIq, NT)
Q Fes• DSp7-
FDR`j�.
nn Q�9S�'�UDTf�yr�V
DATE ( `�I I-
sy
Customer:
Bella Nails
Address:
78370 Hwy 111, Suite 180
La Quinta, CA. 92253
DWg. No.: 82151
Date: 12-28-2016
Designer. JT
Salesperson: BS
E
CHANNEL LETTER SECTION/
LED, HALO ILLUMINATION
3" ALUMINUM RETURNS
EACH LETTER FASTENED BY
MINIMUM OF 4 # 10 SCREWS
WITH STUCCO APPROVED
EXIST Mc
ROCK
ANCHORS
MONUMENT
/ 063 ALUMINUM FACE
HOUSE
POWER [�
D
LE,D. MODULES
DISCONNECT
SWITCH
3/16-PniYC.'ARROMATE
BACKS
WIRE NUTS
LOW VOLIAGE WIRE
r
L.E.D.
DRIVERRIVER
LETTERS PEGGED OFF WALL
WITH 1-1/2"SPACERS
ALL WALL PENETRATIONS TO BE SEALED WITH ILL LISTED SILICONE SEALANT
U.L. 46
NEC ELECTRICAL CODE 2010
THIS SIGN 15 INTENDED TO BE INSTALLED IN ACCORDANCE WITH REQUIREMENTS OF
ARTICLE 600 ON THE NATIONAL ELECTRIC CODE AND OR OTHER APPLICABLE LOCAI CODF5.
THIS INCLUDES PROPER GROUNDING AND BONDING OF THE SIGN.
CHANNEL LETTER CONNECTION DETAIL HOUSE
POWER
LETTER I I CHANNEL LETTER I I CHANNEL LETTER I I CHANNEL LETTER I I CHANNEL LEITER
U.L. LINED AND LABELED
COMPLIES WITH 2013 CA ELECTRIC CODE, ARTICLE 600 -
Telephone: 760 xxx-xxxx Jobsite:
Fax: 7== Highway 111 Northwest Entrance
78370 Hwy 111
La Quinta, CA. 92253
SOUTHWEST ELEVATION
Rev.. 1
Customer Approval:
Landlord Approval:
YOUR SIGNATURE ACKNOWLEDGES FULL APPROVAL OF DESIGN CONTENT
AND LAYOUT, RELEASING SIGN A`RAMA FROM RESPONSIBILITY IN REGARD
TO INCORRECT DESIGN AND INFORMATION. THE COLORS SHOWN ARE ONLY
REPRESENTATIVE OF ACTUAL FMS COLOR CALL OUTS. FINAL COLOR WILL
BE MATCHED AS CLOSE AS POSSBLE, COMMENSURATE WITH MATERIALS USED.
THIS DESIGN IS PROPRIETARY PROPERTY AND MAY NOT BE USED WITHOUT
THE EXPRESSED WRITTEN CONSENT OF SIGN A`RAMA.
0