The URL can be used to link to this page

BRES2017-0189 Revisions 1 & 2+ eev 441 (se ON 78-495 CALLE TAMPICO T�D / "i VOICE (760) 777- 2 LA QUINTA, CALIFORNIA 92253 DESIGN & DEVELOPMENT DEPARTMENT BUILDING PERMIT Permit Type/Subtype: BUILDING RESIDENTIAL/ADDITION Application Number: BRES2017-0189 Property Address: 80295 VIA MIRASOL APN: 777090023 Application Description: PISCO / ADDITION AND REMODEL Property Zoning: Application Valuation: $0.00 Applicant: FEDDERLY & ASSOCIATES 78206 VARNER ROAD STE D #248 PALM DESERT, CA 92211 LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 {commencing with Section 7000) of Division 3 of the Business and Professions Code, and my License is in full force and effect. License Class: B License No.: 762889 Date: Contractor: 19 OI h RtJ 11.0ElDEILAiG4Tl0 w V.0 I hereby affirm under P1111ty of perjury that I A exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit 0 construct, er, mpjove, dTolish, 1% any structure, prior to its issuance, q� s t 11% ' cant tbC per eSflf[ ri signed statement that he or she is I c%n d'pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: (_) I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale. (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_) I, as owner of the property, am exclusively contracting with licensed contractors to construct the project. (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). () I am exempt under Sec. B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Lender's FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date: 1/7/2019 Owner: WALTER J. PISCO 6000 S.E. 20TH ST MERCER ISLAND, WA 98040 Contractor: FEDDERLY & ASSOCIATES 78206 VARNER ROAD STE D #248 PALM DESERT, CA 92211 (760)773-5205 Llc. No.: 762889 WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and wlll malntdi �kk�asation i ancl, it SeCti " L�i Cpda� a of t For tr}�i Ifnit Is Issued. w men nurance carrier and policynumber are: Carrier: HARTFORD CASUALTY IN5URANCE COMPANY Policy Number: tiFy th�a in the p rf�vAFnance the work f h'"��,t�1i'sfr, r iJi i *Mvct a alt rsOn In r s to hec�e l�Ej�el t+5 [ 011 "so corn pensatiA la o allfornia, an agree that, if I should become subject to the workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith comply with those provisions. �� Date: WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT: Application is hereby made to the Building Official for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application , the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction; and hereby authorize representatives of this city to enter upon the above -mentioned property for inspection purposes. Date: Signature (Applicant or Agent): ° !0+ r9 S? -� z �79C Application Number: BRES2017-0189 Property Address: 80295 VIA MIRASOL APN: 777090023 Application Description PISCO / ADDITION AND REMODEL Property Zoning: Application Valuation: $0.00 Applicant: FEDDERLY & ASSOCIATES 78206 VARNER ROAD STE D #248 PALM DESERT, CA 92211 Owner: WALTER J. PISCO 6000 S.E. 20TH ST MERCER ISLAND, WA 98040 Contractor: FEDDERLY & ASSOCIATES 78206 VARNER ROAD STE D #248 PALM DESERT, CA 92211 (760)773-5205 Llc. No.: 762889 Date: 1/7/2019 Detail: ADDITION + REMODEL. 562 SF OF CONDITIONED SPACE ADDED. ADD PANTRY AND WINE ROOM, EXPAND KITCHEN/LIVING ROOM AREAS. RELOCATE STAIRWAY AT ENTRY AND EXPAND OFFICE AT SECOND STORY + NEW OUTDOOR LIVING AREAS AT BACK OF HOME. THIS PERMIT DOES NOT INCLUDE REPLACEMENT OR ALTERATION OF MECHANICAL EQUIPMENT, WATER HEATERS OR MAIN ELECTRICAL SERVICE EQUIPMENT. 2016 CALIFORNIA BUILDING CODES. REA a. Do(,S wtrz Pcked up 01k a p�Vi0u5 d66G bud plaas wept Kot gIV( U +u 4IAcW. FINANCIAL DESCRIPTION ACCOUNT CITY AMOUNT ADDITION, EA ADDITIONAL 500 SF 101-0000-42400 0 $65.36 DESCRIPTION ACCOUNT CITY AMOUNT ADDITION, EA ADDITIONAL 500 SF PC 101-0000-42600 0 $18.24 DESCRIPTION ACCOUNT CITY AMOUNT ADDITION, FIRST 100 SF 101-0000-42400 0 $127.68 DESCRIPTION ACCOUNT CITY AMOUNT ADDITION, FIRST 100 SF PC 101-0000-42600 0 $179.36 Total Paid for ADDITION: $390.64 DESCRIPTION ACCOUNT CITY AMOUNT RE -INSPECTION FEE 101-0000-42400 0 $78.02 DESCRIPTION ACCOUNT CITY AMOUNT RE -INSPECTION FEE 101-0000-42400 0 $78.02 DESCRIPTION ACCOUNT CITY AMOUNT RE -INSPECTION FEE 101-0000-42400 0 $80.05 DESCRIPTION ACCOUNT QTY AMOUNT RE -INSPECTION FEE 101-0000-42400 0 $80.05 Total Paid for ADMINISTRATIVE: $316.14 DESCRIPTION ACCOUNT CITY AMOUNT HOURLY CHARGE - CITY BUILDING STAFF 101-0000-42600 0.75 $120.00 DESCRIPTION ACCOUNT CITY AMOUNT HOURLY CHARGE - CITY BUILDING STAFF 101-0000-42600 1 $160.00 DESCRIPTION ACCOUNT CITY AMOUNT HOURLY CHARGE - ESGIL CIVIL ENGINEER 101-0000-42600 4 $420.00 DESCRIPTION ACCOUNT CITY AMOUNT HOURLY CHARGE - ESGIL CIVIL ENGINEER 101-0000-42600 2 $210.00 Total Paid for BLDG CITY STAFF - PER HOUR: $910.00 DESCRIPTION ACCOUNT CITY AMOUNT Credit Card Fee 101-0000-43505 0 $1.40 DESCRIPTION ACCOUNT CITY AMOUNT Credit Card Fee 101-0000-43505 0 $1.40 DESCRIPTION ACCOUNT CITY AMOUNT Credit Card Fee 101-0000-43505 0 $1.44 DESCRIPTION ACCOUNT CITY AMOUNT Credit Card Fee 101-0000-43505 0 $4.32 DESCRIPTION ACCOUNT CITY AMOUNT Credit Card Fee 101-0000-43505 0 $3.78 DESCRIPTION ACCOUNT CITY AMOUNT Credit Card Fee 101-0000-43505 0 $2.16 Total Paid for Credit Card Fee: $14.50 DESCRIPTION ACCOUNT QTY AMOUNT RESIDENTIAL, EA ADDITION 1,000SF 101-0000-42403 0 $77.52 DESCRIPTION ACCOUNT QTY AMOUNT RESIDENTIAL, EA ADDITION 1,000SF, PC 101-0000-42600 0 $31.92 DESCRIPTION ACCOUNT CITY AMOUNT RESIDENTIAL, FIRST 1,000SF 101-0000-42403 0 $152.00 DESCRIPTION ACCOUNT QTY AMOUNT RESIDENTIAL, FIRST 1,000SF, PC 101-0000-42600 0 $50.16 Total Paid for ELECTRICAL - NEW CONSTRUCTION: $311.60 DESCRIPTION ACCOUNT QTY AMOUNT EXHAUST HOOD In1-"^00-42402 iV1 VV 0 $12.67 DESCRIPTION ACCOUNT CITY AMOUNT EXHAUST HOOD PC 101-0000-42600 0 $5.07 DESCRIPTION ACCOUNT QTY AMOUNT OTHER MECHANICAL EQUIPMENT 101-0000-42402 0 $38.00 DESCRIPTION ACCOUNT QTY AMOUNT OTHER MECHANICAL EQUIPMENT PC 101=0000-42600 0 $38.00 DESCRIPTION ACCOUNT QTY AMOUNT VENT FAN 101-0000-42402 0 $63.35 DESCRIPTION ACCOUNT QTY AMOUNT VENT FAN PC 101-0000-42600 0 $25.35 Total Paid for MECHANICAL: $182.44 DESCRIPTION ACCOUNT CITY AMOUNT PATIO COVER EA ADDITIONAL 101-0000-42400 0 $50.67 DESCRIPTION ACCOUNT CITY AMOUNT PATIO COVER EA ADDITIONAL PC 101-0000-42600 0 $38.00 DESCRIPTION ACCOUNT CITY AMOUNT PATIO COVER, DESIGNED 101-0000-42404 0 $139.84 DESCRIPTION ACCOUNT QTY AMOUNT PATIO COVER, DESIGNED PC 101-0000-42600 0 $176.32 Total Paid for PATIO COVER / COVERED PORCH / LATTICE: $404.83 DESCRIPTION ACCOUNT QTY AMOUNT BUILDING SEWER 101-0000-42401 0 $25.33 DESCRIPTION ACCOUNT QTY AMOUNT BUILDING SEWER PC 101-0000-42600 0 $17.73 DESCRIPTION ACCOUNT QTY AMOUNT 1 FIXTURE/TRAP 101-0000-42401 0 $329.42 DESCRIPTION ACCOUNT CITY AMOUNT FIXTURE/TRAP PC 101-0000-42600 0 $329.42 DESCRIPTION ACCOUNT CITY AMOUNT GAS SYSTEM, 5+ OUTLETS 101-0000-42401 0 $38.00 DESCRIPTION ACCOUNT CITY AMOUNT GAS SYSTEM, 5+ OUTLETS PC 101-0000-42600 0 $25.33 DESCRIPTION ACCOUNT CITY AMOUNT WATER SYSTEM INST/ALT/REP 101-0000-42401 0 $12.67 DESCRIPTION ACCOUNT CITY AMOUNT WATER SYSTEM INST/ALT/REP PC 101-0000-42600 0 $12.67 Total Paid for PLUMBING FEES: $790.57 DESCRIPTION ACCOUNT CITY AMOUNT REMODEL, EA ADDITIONAL 500 SF 101-0000-42400 0 $273.60 DESCRIPTION ACCOUNT CITY AMOUNT REMODEL, EA ADDITIONAL 500 SF PC 101-0000-42600 0 $218.88 DESCRIPTION ACCOUNT CITY AMOUNT REMODEL, FIRST 100 SF 101-0000-42400 0 $51.68 DESCRIPTION ACCOUNT CITY AMOUNT REMODEL, FIRST 500 SF PC 101-0000-42600 0 $141.36 Total Paid for REMODEL: $685.52 DESCRIPTION ACCOUNT CITY AMOUNT SMI - RESIDENTIAL 101-0000-20308 0 $0.50 Total Paid for STRONG MOTION INSTRUMENTATION SMI: $0.50 DESCRIPTION ACCOUNT CITY AMOUNT TECHNOLOGY ENHANCEMENT FEE 502-0000-43611 0 $5.00 Total Paid for TECHNOLOGY ENHANCEMENT FEE: $5.00 9—le U I W PI:12 M i 7 (iSWAV%017r-" PLAN LOCATION: Project Address: `1 Project Description: Pool, Remodel, Add't, Elect, Plumb, Mech APN #: 1TO S` ; a__- -4 bN)A 0 `'1 Applicant Name: Address: 1 7y 0 A City, ST, Zip: Lc�✓\ t S £+ Telephone: 767 3 Email: Valuation of Project $ Contractor Name: � T C S� ll�' New SFD Construction: Address: [�" A._5 �� { Conditioned Space SF City, St, Zip Garage SF Telephone: Patio/Porch SF Email: Fire Sprinklers SF State Lic: City Bus Lic: Arch/Eng Name: Construction Type: Occupancy: Address: Grading: City, St, Zip Telephone: Bedrooms: Stories: F#Units: Email: State Lic: City Bus Lic: Property Owner's Name: New Commercial / Tenant Improvements: Address: Total Building SF City, ST, Zip Construction Type: Occupancy: Telephone: Email: 78495 CALLE TAMPICO LA QU I NTA, CA 92253 760-777-7000 OFFICE USE ONLY # Submittal Plan Sets Req'd -Rec'd Structural Calcs Truss Calcs Title 24 Calcs Soils Report Grading Plan (PM10) Landscape Plan Subcontractor List Grant Deed HOA Approval School Fees Burrtec Debris Plan Planning approval Public Works approval Fire approval City Business License Building Permit Number. &�'�5�1 —Qlfq Project Description: Remodel Exempt: O (Materials may contain hazardous wastes and are not subject to recycling provisions) Construction Debris Management Plan Plan Submittal Job Site owners Name Number, Street, or PO Box City, State, Postal Code Owner's Phone Number Owner's E-Mail Address Project Manager's Name Project Manager's Phone Number Project Manager's E-mail Address Builder / Contn Number, Street or PO City, State, Postal C Project Square 8/30/2017 80295 Via Mirasol Pisco, Walter 6000 SE 20th Mercer Island, WA 98040 Nicole Charon 760-773-5205, x107 nicole_c_Ofedderly.com Fedderly & Associates 78206 Varner Rd., Ste. D, #248 Palm Desert, CA 92211 1,169 City Approval By ��- Date of City Approval 3Q Materials To Be Discarded: Product Trash Asphalt Brick/Block Cardboard Commingled Concrete Drywall Donated / Reuse' 'Describe Items Tons 2.22 Mot recyclable 0.00 Recyclable 0.39 Recyclable 0.00 Recyclable 0.09 Recyclable 0.07 Recyclable 0.00 Recyclable Totals- Recycle Trash 3.9 1 2.2 Product Masonry (broken) Plaster Scrap Metal Tile (floor) Tile (roof) Wood Landscape Debris Tons 0.00 Recyclable 0.23 Recyclable 0.00 Recyclable 0.20 Recyclable Projected Diversion: 63.7% Recyclable Recyclable I understand it is the property owner's responsibility to submit copies of weight tickets or receipts to the District Environmental Coordinator as these hauls occur. I hereby certify that completion, implementation and adherence of the Debris Management Plan (DMP) for the above named project shall guarantee that at least 50% of the jobsile waste is diverted from landlilling_ The remaining material will be recycled or reused. I will divert, for recycling or re -use, remaining materials generated from the first day of the pmjecl through the completion of the project in accordance with this plan. This DMP is issued in the name of the properly owner(s) and shall remain their property throughout the construction and/or demolition project. A contractor serving as agent of the owner may obtain a DMP for the owner. However, the DMP is still issued in the name of the property owners) and the owner retains legal responsibility for ensuring that the provisions of the DMP are adhered to. The property owner(s) and general contractor shall be kept informed of the diversion progress tnrough bi-monthly reports. If self -hauling, all refuse material from this project site must be taken to an approved recycler or transfer station. Owner / Developer / Project Manager / Superintendent Date EsGil Corporation In Partnership with Government for Bui(ding Safety DATE: September PO, 2017 JURISDICTION: La Quinta PLAN CHECK NO.: BRES2017-0189 SET: II PROJECT ADDRESS: 80295 Via Mirasol PROJECT NAME: Addition & Remodel for Pisco Residence ❑ APPLICANT �JURIS. ❑ PLAN REVIEWER ❑ FILE ® The plans transmitted herewith have been corrected where necessary and substantially comply with the jurisdiction's building codes. ❑ The plans transmitted herewith will substantially comply with the jurisdiction's codes when minor deficiencies identified below are resolved and checked by building department staff. [ The plans transmitted herewith have significant deficiencies identified on the enclosed check list and should be corrected and resubmitted for a complete recheck. [� The check list transmitted herewith is for your information. The plans are being held at EsGil Corporation until corrected plans are submitted for recheck. The applicant's copy of the check list is enclosed for the jurisdiction to forward to the applicant contact person. The applicant's copy of the check list has been sent to: ® EsGil Corporation staff did not advise the applicant that the plan check has been completed. ❑ EsGil Corporation staff did advise the applicant that the plan check has been completed. Person contacted: Telephone #: Date contacted: I" (bEmail: Mail Telephone Fax In Person ® REMARKS: STRUCTURAL CHECK ONLY By: Abe Doliente Enclosures: EsGil Corporation ❑ GA ❑ EJ ❑ MB ❑ PC 9/13/17 9320 Chesapeake Drive, Suite 208 ♦ San Diego, California 92123 ♦ (858) 560-1468 ♦ Fax (858) 560-1576 I BUILDING ENERGY ANALYSIS REPORT 1 PROJECT: Pisco Residence Addition/Remodel Lot 4, 80-295 Via Mirasol, The Hideaway La Quinta, CA 92253 Project Designer: Fedderly & Associates 387747 Nopales Road Palm Desert, CA 92211 (760) 773-5205 Report Prepared by: Jon d. Scott Scott Design and Title 24, Inc, 74-818 Velie Way STE 8 Palm Desert, CA 92260 (760) 200-4780 Job Number: Date: 9/8/2017 FRE-52VI 7- bl M CITY OF LA QUANTA BUILDING & SAFETY DEPT. APPROVED FOR CONSTRUCTION DATE �►Tgy O Flee REC!-,-IVFD SEP 1 1 2017 CITY OF LA QUINTA COMMUNITY DEVELOPMENT The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2016 Building Energy Efficiency Standards. This program developed by EnergySoft Software — www.energysoft.com. TABLE OF CONTENTS Cover Page Table of Contents Form CF-1 R-PRF-01-E Certificate of Compliance Form RMS-1 Residential Measures Summary Form MF-1 R Mandatory Measures Summary HVAC System Heating and Cooling Loads Summary Room Load Summary Room Heating Peak Loads Room Cooling Peak Loads EnergyPro 7.1 by EnergySoft Job Number. ID: User Number: 6712 1 2 3 13 15 19 20 21 25 CERTI' TE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE HOD CF IRF-01 Project Name: Pisco Calculation Description: Title 24 Analysis COMPLIANCE RESULTS Calculation Date/Time: 11:19, Fri, Sep 08, 2017 Input File Name: Pisco-Fedderly-17.ribd16x Page 1 of 10 01 Building Complies with Computer Performance 02 This building incorporates features that require field testing and/or verification by a certified HERS rater under the supervision of a CEC-approved HERS provider. This compliance analysis is valid only for permit applications through October 24, 2017 REQUIRED SPECIAL FEATURES The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis. NO SPECIAL FEATURES REQUIRED Registration Number: 217-P010309787B-000-000-0000000-0000 Registration Date/Time: HERS Provider: CaiCERTS inc. CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-07312017-695 Report Generated at: 2017-09-08 11:20:35 CERTI ,TE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE HOD CF )RF-01 Project Name: Pisco Calculation Date/Time: 11:19, Fri, Sep 08, 2017 Page 2 of 10 Calculation Description: Title 24 Analysis Input File Name: Pisco-Feddedy-17.ribd16x HERS FEATURE SUMMARY The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is provided in the building components tables below. Building -level Verifications: • --None— Cooling System Verifications: • -- None -- HVAC Distribution System Verifications: • Duct Sealing Domestic Hot Water System Verifications: • -- None -- BUILDING - FEATURES INFORMATION 01 02 03 04 05 06 07 Project Name Conditioned Floor Area (ft2) Number of Dwelling Units Number of Bedrooms Number of Zones Number of Ventilation Cooling Systems Number of Water Heating Systems Pisco 6216 1 5 4 0 1 ZONE INFORMATION 01 02 03 04 05 06 07 Zone Floor Area Avg. Ceiling Zone Name Zone Type HVAC System Name (ft2) Height Water Heating System 1 Water Heating System 2 Residence -1st Fir I Conditioned HVAC1 4805 9 DHW Sys 1 n/a 1st Fir. Addition Conditioned HVAC1 457 9 DHW Sys 1 n/a Exist. Second Floor Conditioned HVAC1 849 9 DHW Sys 1 n/a 2nd Fir. Addition Conditioned HVAC1 105 9 DHW Sys 1 n/a Registration Number: 217-P010309787B-000-000-0000000-0000 Registration Date/Time: HERS Provider: CaICERTS inc. CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-07312017-695 Report Generated at: 2017-09-08 11:20:35 CERTI TE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE HOD CF IRF-01 Project Name: Pisco Calculation Date/Time: 11:19, Fri, Sep 08, 2017 Page 3 of 10 Calculation Description: Title 24 Analysis Input File Name: Pisco-Feddedy-17.ribdl6x OPAQUE SURFACES 01 02 03 04 05 06 07 08 09 10 Verified Window & Door Tilt Existing Name Zone Construction Azimuth Orientation Gross Area (ft) Area (ft) (deg) Status Condition 60 Wall Residence-1 st Fir R-19 Wall 60 Left 1140 234 90 Existing No 150d Wall Residence -1st Fir R-19 Wall 150 Back 1386 667.6 90 Existing No 240d Wall Residence -1st Fir R-19 Wall 240 Right 1159 234.9 90 Altered N/A 330d Wall Residence -1st Fir R-19 Wall 330 Front 1254 247.8 90 Existing No Roof Residence -1st Fir R-38 Roof Attic 4397 Existing No 60d Wall 1st Fir. Addition R-21 Wall (W.21.2x6.16) 60 Left 520 196 90 New N/A 150d Wall 2 1st Fir. Addition R-21 Wall (W.21.2x6.16) 150 Back 221.6 72 90 New N/A 240d Wall 2 1st Fir. Addition R-21 Wall (W.21.2x6.16) 240 Right 290 57.5 90 New N/A 330d Wall 2 1st Fir. Addition R-21 Wall (W.21.2x6.16) 330 Front 1010 155.8 90 New N/A Roof 2 1 st Fir. Addition R-38 Roof Attic 457 New N/A 60d Wall 2 Exist. Second Floor R-19 Wall 60 Left 441 101 90 Existing No 150d Wall 3 Exist. Second Floor R-19 Wall 150 Back 324 70 90 Existing No 240d Wall 3 Exist. Second Floor R-19 Wall 240 Right 450 28 90 Existing No 330d Wall 3 Exist. Second Floor R-19 Wall 330 Front 486 134.5 90 Existing No Roof 3 Exist. Second Floor R-38 Roof Attic 849 Existing No Raised Floor Exist. Second Floor R-19 Floor (F. 1 9.2x8.16) 441 Existing No 60d Wall 3 2nd Fir. Addition R-21 Wall (W.21.2x6.16) 60 Left 44 0 90 New N/A 150d Wall 4 2nd Fir. Addition R-21 Wall (W.21.2x6.16) 150 Back 44 0 90 New N/A 240d Wall 4 2nd Fir. Addition R-21 Wall (W.21.2x6.16) 240 Right 44 0 90 New N/A 330d Wall 4 2nd Fir. Addition R-21 Wall (W.21.2x6.16) 330 Front 44 0 90 New N/A Roof 4 2nd Fir. Addition R-38 Roof Attic 105 New N/A Registration Number: 217-P010309787B-000-000-0000000-0000 Registration Dateffime: HERS Provider: CaICERTS inc. CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-07312017-695 Report Generated at: 2017-09-08 11:20:35 CERTI ATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE Project Name: Pisco Calculation Description: Title 24 Analysis 'HOD Calculation Date/Time: 11:19, Fri, Sep 08, 2017 Input File Name: Pisco-Fedderly-17.ribd16x CF 'RF-01 Page 4 of 10 ATTIC 01 02 03 04 05 06 07 08 09 10 Name Construction Type Roof Rise Roof Reflectance Roof Emittance Radiant Barrier Cool Roof Status Verified Existing Condition Attic Residence -1st Fir Attic RoofResidence-1st Fir Ventilated 3 0.1 0.85 No No Existing No Attic 1st Fir. Addition Attic Roof1st Fir. Addition Ventilated 1 0.1 0.85 1No No New No Attic Exist. Second Floor Attic RoofExist. Second Floor Ventilated 1 0.1 0.85 No No Existing No Attic 2nd Fir. Addition Attic Roof2nd Fir. Addition Ventilated 1 0.1 0.85 No No New No Registration Number: 217-Po10309787B-000-000-0000000-0000 Registration DateMme: HERS Provider: CaICERTS inc. CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-07312017-695 Report Generated at: 2017-09-08 11:20:35 CERTI TE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE HOD CF )RF-01 Project Name: Pisco Calculation Date/Time: 11:19, Fri, Sep 08, 2017 Page 5 of 10 Calculation Description: Title 24 Analysis Input File Name: Pisco-Fedderly-17.ribd16x FENESTRATION / GLAZING 01 02 03 04 05 06 07 08 09 10 11 Verified Name Surface (Orientation -Azimuth) Width(ft) Height (ft) Multiplier Area (ft) U-factor Existing SHGC Exterior Shading Status Condition 13 60 Wall (Left-60) - 1 48.0 0.32 0.25 1 Insect Screen (default) Altered N/A K 60 Wall (Left-60) -- 1 25.0 0.32 0.25 Insect Screen (default) Altered N/A L 60 Wall (Left-60) - - 1 65.0 0.32 0.25 Insect Screen (default) Altered N/A 132 60 Wall (Left-60) - 1 48.0 0.32 0.25 Insect Screen (default) Altered N/A 133 60 Wall (Left-60) ---- - 1 48.0 0.32 0.25 Insect Screen (default) Altered N/A GG 150d Wall (Back-150) - 1 16.8 0.32 0.25 Insect Screen (default) Altered N/A 9 150d Wall (Back-150) - - 1 210.0 0.32 0.25 Insect Screen (default) Altered N/A GG 2 150d Wall (Back-150) ---- - 1 16.8 0.32 0.25 Insect Screen (default) Altered N/A 10 150d Wall (Back-150) - - 1 200.0 0.32 0.25 Insect Screen (default) Altered N/A GG 3 150d Wall (Back-150) - - 1 16.8 0.32 0.25 Insect Screen (default) Altered N/A H 150d Wall (Back-150) - 1 30.4 0.32 0.25 Insect Screen (default) Altered N/A 12 150d Wall (Back-150) -- 1 48.0 0.32 0.25 Insect Screen (default) Altered N/A H 2 150d Wall (Back-150) -- - 1 30.4 0.32 0.25 Insect Screen (default) Altered N/A J 150d Wall (Back-150) - - 1 12.0 0.32 0.25 Insect Screen (default) Altered N/A M 150d Wall (Back-150) - - 1 43.2 0.32 0.25 Insect Screen (default) Altered N/A M 2 150d Wall (Back-150) - - 1 43.2 0.32 0.25 Insect Screen (default) Altered N/A Q 240d Wall (Right-240) - - 1 27.5 0.32 0.25 Insect Screen (default) Altered N/A 6 240d Will (Right-240) - ---- 1 24.0 0.32 0.25 Insect Screen (default) Altered N/A R 240d Wall (Right-240) ---- - 1 4.0 0.32 0.25 Insect Screen (default) Altered N/A R 2 240d Wall (Right-240) --- - 1 4.0 0.32 0.25 Insect Screen (default) Altered N/A R 3 240d Wall (Right-240) - - 1 4.0 0.32 0.25 Insect Screen (default) Altered N/A S 240d Wall (Right-240) - - 1 46.4 0.32 0.25 Insect Screen (default) Altered N/A T 240d Wall (Right-240) -- -- 1 53.0 0.32 0.25 Insect Screen (default) Altered N/A 11 240d Wall (Right-240) -- - - 1 72.0 0.32 0.25 Insect Screen (default) Altered N/A 18 330d Wall (Front-330) - - 1 24.0 0.32 0.25 Insect Screen (default) Altered N/A AA 330d Wall (Front-330) --- 1 12.5 0.32 0.25 Insect Screen (default) Altered N/A U 330d Wall (Front-330) -- 1 50.0 0.32 0.25 Insect Screen (default) Altered N/A AA 2 330d Wall (Front-330) - - 1 12.5 0.32 0.25 Insect Screen (default) Altered N/A Registration Number: 217-P010309787B-000-000-0000000-0000 Registration Date/Time: HERS Provider: CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-07312017-695 CaICERTS inc. Report Generated at: 2017-09-08 11:20:35 CERTI ATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE 'HOD CI ?RF-01 Project Name: Pisco Calculation Date/Time: 11:19, Fri, Sep 08, 2017 Page 6 of 10 Calculation Description: Title 24 Analysis Input File Name: Pisco-Feddedy-17.ribd16x U 2 330d Wall (Front-330) - - 1 50.0 0.32 0.25 Insect Screen (default) Altered N/A AA 3 330d Wall (Front-330) -- - 1 12.5 0.32 0.25 Insect Screen (default) Altered N/A U 3 330d Wall (Front-330) ---- 1 50.0 0.32 0.25 Insect Screen (default) Altered N/A P 330d Wall (Front-330) - - 1 6.3 0.32 0.25 Insect Screen (default) Altered N/A N 330d Wall (Front-330) - 1 15.0 0.32 0.25 Insect Screen (default) Altered N/A N 2 330d Wall (Front-330) - 1 15.0 0.32 0.25 Insect Screen (default) Altered N/A B 60d Wall (Left-60) --- 1 55.0 0.32 0.25 Insect Screen (default) New N/A V 60d Wall (Left-60) - - 1 45.0 0.32 0.25 Insect Screen (default) New N/A 8 60d Wall (Left-60) - 1 96.0 0.32 0.25 Insect Screen (default) New N/A 7 150d Wall 2 (Back-150) - - 1 72.0 0.32 0.25 Insect Screen (default) New N/A G 240d Wall 2 (Right-240) - -- 1 1.5 0.32 0.25 Insect Screen (default) New N/A F 240d Wall 2 (Right-240) - - 1 32.0 0.32 0.25 Insect Screen (default) New N/A 62 240d Wall 2 (Right-240) -- -- 1 24.0 0.32 0.25 Insect Screen (default) New N/A F 2 330d Wall 2 (Front-330) - 1 32.0 0.32 0.25 Insect Screen (default) New N/A B 2 330d Wall 2 (Front-330) - -- 1 55.0 0.32 0.25 Insect Screen (default) New N/A 1 330d Wall 2 (Front-330) - - 1 50.0 0.32 0.25 Insect Screen (default) New N/A BB 330d Wall 2 (Front-330) - - 1 17.0 0.32 0.25 Insect Screen (default) New N/A A 330d Wall 2 (Front-330) - 1 1.8 0.32 0.25 Insect Screen (default) New N/A CC 60d Wall 2 (Left-60) - - 1 15.0 0.32 0.25 Insect Screen (default) Altered N/A CC 2 60d Wall 2 (Left-60) - 1 15.0 0.32 0.25 Insect Screen (default) Altered N/A B 3 60d Wall 2 (Left-60) -- - 1 55.0 0.32 0.25 Insect Screen (default) Altered N/A FF 60d Wall 2 (Left-60) - - 1 16.0 0.32 0.25 Insect Screen (default) Altered N/A GG 4 150d Wall 3 (Back-150) - -- 1 17.5 0.32 0.25 Insect Screen (default) Altered N/A GG 5 150d Wall 3 (Back-150) - 1 17.5 0.32 0.25 Insect Screen (default) Altered N/A GG 6 150d Wall 3 (Back-150) - - 1 17.5 0.32 0.25 Insect Screen (default) Altered N/A GG 7 150d Wall 3 (Back-150) - - 1 17.5 0.32 0.25 Insect Screen (default) Altered N/A FF 2 240d Wall 3 (Right-240) 1 16.0 0.32 0.25 Insect Screen (default) Altered N/A EE 240d Wall 3 (Right-240) - 1 4.0 0.32 0.25 Insect Screen (default) Altered N/A EE 2 240d Wall 3 (Right-240) -- - 1 4.0 0.32 0.25 Insect Screen (default) Altered N/A EE 3 240d Wall 3 (Right-240) -- - 1 4.0 0.32 0.25 Insect Screen (default) Altered N/A 23 330d Wall 3 (Front-330) - 1 42.0 0.32 0.25 Insect Screen (default) Altered N/A B 4 330d Wall 3 (Front-330) - 1 55.0 0.32 0.25 Insect Screen (default) Altered N/A AA 4 330d Wall 3 (Front-330) - -- 1 12.5 0.32 0.25 Insect Screen (default) Altered N/A Registration Number: 217-P010309787B-000-000-0000000-0000 Registration DateRme: HERS Provider: CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-07312017-695 CaICERTS inc. Report Generated at: 2017-09-08 11:20:35 CERTI! TE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE HOD CF IRF-01 Project Name: Pisco Calculation Date/Time: 11:19, Fri, Sep 08, 2017 Page 7 of 10 Calculation Description: Title 24 Analysis Input File Name: Pisco-Fedderly-17.ribdl6x AA 5 330d Wall 3 (Front-330) --- 1 12.5 0.32 0.25 Insect Screen (default) Altered N/A AA 6 330d Wall 3 (Front-330) — -- 1 12.5 0.32 0.25 Insect Screen (default) Altered N/A OPAQUE SURFACE CONSTRUCTIONS 01 02 03 04 05 06 07 Construction Name Surface Type Construction Type Framing Total Cavity R-value Winter Design U-value Assembly Layers • Cavity/Frame: no insul. /2x4 Top Chrd Attic RoofResidence-1st Fir Attic Roofs Wood Framed Ceiling 2x4 Top Chord of Roof Truss @ 24 in. O.C. Roof Deck: Wood Siding/sheathing/decking none 0.644 Roofing: Light Roof (Asphalt Shingle) Ceilings (below • Inside Finish: Gypsum Board R-38 Roof Attic attic) Wood Framed Ceiling 2x4 @ 16 in. O.C. R 38 0.025 Cavity/Frame: R-9.1 /2x4 Over Ceiling Joists: R-28.9 insul. Inside Finish: Gypsum Board R-19 Wall Exterior Walls Wood Framed Wall 2x6 @ 16 in. O.C. R 23 0.066 Cavity / Frame: R-23 / 2x6 Exterior Finish: 3 Coat Stucco • Cavity/Frame: no insul. /2x4 Top Chrd Attic Roofl st Fir. Addition Attic Roofs Wood Framed Ceiling 2x4 Top Chord of Roof Truss @ 24 in. O.C. Roof Deck: Wood Siding/sheathing/decking none 0.644 Roofing: Light Roof (Asphalt Shingle) • Inside Finish: Gypsum Board R-21 Wall (W21.2x6.16) Exterior Walls Wood Framed Wall 2x6 @ 16 in. O.C. R 21 0.069 • Cavity/Frame: R-21 /2x6 Exterior Finish: 3 Coat Stucco • Cavity/Frame: no insul. /2x4 Top Chrd Attic RoofExist. Second Floor Attic Roofs Wood Framed Ceiling 2x4 Top Chord of Roof Truss @ 24 in. O.C. Roof Deck: Wood Siding/sheathing/decking none 0.644 Roofing., Light Roof (Asphalt Shingle) Floors Over • Floor Surface: Carpeted R-19 Floor (F.19.2x8.16) Crawlspace Wood Framed Floor 2x8 @ 16 in. O.C. R 19 0.047 Floor Deck: Wood Siding/sheathing/decking Cavity /Frame: R-19 /2x8 • Cavity /Frame: no insul. /2x4 Top Chrd Attic Roof2nd Fir. Addition Attic Roofs Wood Framed Ceiling 2x4 Top Chord of Roof Truss @ 24 in. O.C. Roof Deck.' Wood Siding/sheathing/decking none 0.644 Roofing: Light Roof (Asphalt Shingle) SLAB FLOORS 01 02 03 04 05 06 07 08 09 Name Zone Perimeter Area Verified Carpeted Existing (ft) (ft) Edge Insul. R-value Fraction Heated Status Condition Slab Residence -1st Fir 4805 536 None 0.8 No Existing No Slab 2 1st Fir. Addition 457 71 None 0.8 No New No Slab 3 2nd Fir. Addition 105 71 None 0.8 No New No Registration Number: 217-Po10309787B-000-000-0000000-0000 Registration Date/Time: HERS Provider: CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-07312017-695 CaICERTS inc. Report Generated at: 2017-09-08 11:20:35 CERTII TE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE -IOD CF IRF-01 Project Name: Pisco Calculation Date/Time: 11:19, Fri, Sep 08, 2017 Page 8 of 10 Calculation Description: Title 24 Analysis Input File Name: Pisco-Feddedy-17.ribdl6x BUILDING ENVELOPE - HERS VERIFICATION 01 02 03 04 Quality Insulation Installation (QII) Quality Installation of Spray Foam Insulation Building Envelope Air Leakage CFM50 Not Required Not Required Not Required --- WATER HEATING SYSTEMS 01 02 03 04 05 06 07 08 Solar Name System Type Distribution Type Water Heater Number of Heaters Fraction N Status Verified Existing Condition DHW Sys 1 DHW Standard DHW Heater 1 2 Annual Existing No WATER HEATERS 01 02 03 04 05 06 07 08 09 10 11 Tank Energy Tank Insulation Tank Location or Heater Number Volume Factor or Input R-value Standby Loss / Ambient Name Element Type Tank Type of Units (gal) Efficiency Rating/Pilot (Int/Ext) Recovery Eff NEEA Heat Pump Type Condition DHW Heater 1 Gas Small Storage 2 75 0.58 EF 60000 Btu/hr n/a n/a n/a n/a SPACE CONDITIONING SYSTEMS 01 02 03 04 05 06 07 08 09 Heating System Cooling System Name System Type Name Ducted Name Ducted Distribution System Fan System I Floor Area Served Status Verified Existing Condition HVAC1 Other Heating and Heating Yes Cooling Yes Air Distribution HVAC Fan Cooling System Component 1 Component 1 System 1 1 6216 Existing No HVAC - HEATING UNIT TYPES 01 02 03 04 Name System Type Number of Units Efficiency Heating Component 1 CntrlFumace 4 80 AFUE HVAC - COOLING UNIT TYPES 01 02 03 04 05 06 07 08 Efficiency Name System Type Number of Units EER SEER Zonally Controlled Compressor Type HERS Verification Cooling Component 1 SplitAirCond 4 10 12 Not Zonal Single Speed Cooling Component 1-hers-cool Registration Number: 217-P010309787B-000-000-0000000-0000 Registration Date/Time: HERS Provider: CaICERTS inc. CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-07312017-695 Report Generated at: 2017-09-08 11:20:35 CERTI ATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE 'HOD CF ')RF-01 Project Name: Pisco Calculation Date/Time: 11:19, Fri, Sep 08, 2017 Page 9 of 10 Calculation Description: Title 24 Analysis Input File Name: Pisco-Feddedy-17.ribd16x HVAC COOLING - HERS VERIFICATIONx 01 02 03 04 05 06 Verified Refrigerant Name Verified Airflow Airflow Target Verified EER Verified SEER Charge Cooling Component 1-hers-cool Not Required n/a Not Required Not Required Not Required HVAC - DISTRIBUTION SYSTEMS 01 02 03 04 05 06 07 08 09 10 Insulation Supply Duct Return Duct Verified Existing HERS Name Type Duct Leakage R-value Location Location Bypass Duct Status Condition Verification Air Distribution Ducts located in attic Air Distribution System 1 (Ventilated and Sealed and tested 8.0 Attic Attic None Altered No System Unventilated) 1-hers-dist HVAC DISTRIBUTION - HERS VERIFICATION 01 02 03 04 05 06 Duct Leakage Duct Leakage Verified Duct Design Name Verification Target (%) Verified Duct Location Return Supply Air Distribution System 1-hers-dist Required 5.0 _ Registration Number: 217-P010309787B-000-000-0000000-0000 Registration Date/Time: HERS Provider: CaICERTS inc. CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-07312017-695 Report Generated at: 2017-09-08 11:20:35 CERTI TE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE Project Name: Pisco Calculation Description: Title 24 Analysis DOCUMENTATION AUTHOR'S DECLARATION STATEMENT 1. 1 certify that this Certificate of Compliance documentation is accurate and complete. Documentation Author Name: Tim Scott Company: Scott Design and Title 24, Inc. Address: 77085 Michigan Drive City/State/Zip: Palm Desert, CA 92211 RESPONSIBLE PERSON'S DECLARATION STATEMENT HOD Calculation Date/Time: 11:19, Fri, Sep 08, 2017 Input File Name: Pisco-Feddedy-17.ribd16x Documentation Author Signature: Signature Date: CEA/HERS Certification Identification (If applicable), Phone: 760-200-4780 CF IRF-01 Page 10 of 10 I certify the following under penalty of perjury, under the laws of the State of California: 1. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance. 2. 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of Regulations. 3. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents, worksheets, calculations. plans and specifications submitted to the enforcement agency for approval with this building permit application. Responsible Designer Name: Responsible Designer Signature: Tim Scott I Terri-5elozlTi Company: Date Signed: Scott Design and Title 24, Inc. Address: License: 77085 Michigan Drive na City/State/Zip: Phone: Palm Desert, CA 92211 760-200-4780 Digitally signed by CaICERTS. This digital signature is provided in order to secure the content of this registered document, and in no way implies Registration Provider responsibility for the accuracy of the information. Registration Number: 217-P010309787B-000-000-0000000-0000 Registration Date/Time: CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-07312017-695 I. Easy to Verify at CaICERTS.com HERS Provider: CaICERTS inc. Report Generated at: 2017-09-08 11:20:35 RESIDENTIAL MEASURES SUMMARY RMS-1 Project Name Building Type m Single Family ❑ Addition Alone Date Pisco Residence Addition/Remodel ❑ Multi Family m Existing+ Addition/Alteration 9/8/2017 Project Address California Energy Climate Zone Total Cond. Favor Area Addition # of Units Lot 4, 80-295 Via Mirasol, The Hideaway CA Climate Zone 15 6,216 562 1 INSULATION Area Construction Type Cavity (ft) Special Features Status Roof Wood Framed Attic R 38 5,246 Existing Wall Wood Framed R 23 3,998 Existing Wall Wood Framed R 23 924 Altered Slab Unheated Slab -on -Grade - no insulation 4,805 Perim = 536' Existing Demising Wood Framed - no insulation 980 New Roof Wood Framed Attic R 38 562 New Wall Wood Framed R 21 1,736 New Slab Unheated Slab -on -Grade - no insulation 562 Perim = 142' New FENESTRATION To#aJ Area: 2,199 Gfazin Percents e: 35.4 ° New1Al#ered Average U•Factor. 0.32 Orientation Area fl2} U-Fac SHGC Overhang Sidefins Exterior Shades Status Left (NE) 531.0 0.320 0.25 none none Bug Screen Altered Rear (SE) 809.6 0.320 0.25 none none Bug Screen Altered Right (SM 320.4 0.320 0.25 none none Bug Screen Altered Front (NK9 538.1 0.320 0.25 none none Bug Screen Altered HVAC SYSTEMS Qty. Heating 4 Central Furnace HVAC DISTRIBUTION Location Heati HVAC Ducted WATER HEATING Qtv. Tvbe Min. Eff Cooling Min. Eff 80% AFUE Split Air Conditioner 12.0 SEER Ig Cooling Duct Location Ducted Attic Gallons Min. Eff Distribution Thermostat Status Setback Existing Duct R-Value Status 8.0 Altered Status Ene Pro 7.1 U EneeqySoft User Number: 6712 ID. Paue 13 of 33 RESIDENTIAL MEASURES SUMMARY RMS-1 Project Name Building Type 10 Single Family ❑ Addition Alone Date Pisco Residence Addition/Remodel ❑ Multi Family m Existing+ Addition/Alteration 9/8/2017 Project Address California Energy Climate Zone Total Cond, Floor Area Addition # of Units Lot 4, 80-295 Via Mirasol, The Hideaway CA Climate Zone 15 6,216 562 1 INSULATION Area Construction Type Cavity feSpecial Features Status Floor Wood Framed w/Crawl Space R 19 441 Existing FENESTRATION I Total Area: 2,1991 Glazing Parcentage: 35.4 % I New/Altered Average U-Factor 0.32 Orientation Area(ft) U-Fac SHGC Overhang Sidefins Exterior Shades Status HVAC SYSTEMS Qty. Heating Min. Eff Coolin HVAC DISTRIBUTION Location Heating Coolin Min. Eff Duct Location WATER HEATING Qty. Type Gallons Min. Eff Distribution Thermostat Status Duct R-Value Status Status 6712 ID: Paae 14 ', 2016 Low -Rise Residential Mandatory Measures Summary NOTE: Low-rise residential buildings subject to the Energy Standards must comply with all applicable mandatory measures, regardless of the compliance approach used. Review the respective section for more information. `Exceptions may apply. Building Envelope Measures: § 110.6(a)l: Air Leakage. Manufactured fenestration, exterior doors, and exterior pet doors must limit air leakage to 0.3 cfm/ftz or less when tested per NFRC-400orASTM E283 orAAMANDMAICSA 101/I.S.2/A440-201I. § 110.5(8)5: Labeling. Fenestration products must have a label meeting the requirements of § 10-111(a). § 110.6(b): Field fabricated exterior doors and fenestration products must use U-factors and solar heat gain coefficient (SHGC) values from TABLES 110.6-A and 110.6-B for compliance and must be caulked andfor weatherstri § 110.7: Air Leakage. All joints, penetrations, and other openings in the building envelope that are potential sources of air leakage must be caulked, gasketed. or weather strinoed. § 110.8(a): Insulation Certification by Manufacturers. Insulation specified or installed must meet Standards for Insulating Material. § 110.8(g): Insulation Requirements for Heated Slab Floors. Heated slab floors must be insulated per the requirements of § 110.8(g). § 110.8(i): Roofing Products Solar Reflectance and Thermal Emittance. The thermal emittance and aged solar reflectance values of the roofing material must meet the requirements of J 110.8 i when the installation of a cool roof is specified on the CF1 R. § 110.80): Radiant Barrier. A radiant barrier must have an emittance of 0.05 or less and be certified to the Department of Consumer Affairs. Ceiling and Rafter Roof Insulation. Minimum R-22 insulation in wood -frame ceiling; or the weighted average U-factor must not exceed 0.043. Minimum R-19 or weighted average U-factor of 0.054 or less in a rafter roof alteration. Attic access doors must have permanently attached § 150.0(a): insulation using adhesive or mechanical fasteners. The attic access must be gasketed to prevent air leakage. Insulation must be installed in direct contact with a continuous roof or ceiling which is sealed to limit infiltration and exfiltration as specified in § 110.7,.Including but not limited to placig insulation either above or below the roof deck or on top of a drywall oeifin .' § 150.0(b): Loose -fill Insulation. Loose fill insulation must meet the manufacturer's required density for the labeled R-value. Wall Insulation. Minimum R-13 insulation in 2x4 inch wood framing wall or have a U-factor of 0.102 or less (R-19 in 2x6 or U-factor of 0.074 or § 150.0(c): less). Opaque non -framed assemblies must have an overall assembly U-factor not exceeding 0.102, equivalent to an installed value of R-13 in a wood framed assembiv.' § 150.0(d): Raised -floor Insulation. Minimum R-19 insulation in raised wood framed floor or 0.037 maximum U-factor.' § 150.0(f): Slab Edge Insulation. Slab edge insulation must meet all of the following: have awater absorption rate, for the insulation material alone without facings, no greater than 0.3%; have a water vapor permeance no greater than 2.0 perm/inch; be protected from physical damage and UV light deterioralion� and, when installed as pad of a heated slab floor, meet the requirements of 110.8 § 150.0(g)l: Vapor Retarder. In Climate Zones 1-16, the earth floor of unvented crawl space must be covered with a Class I or Class II vapor retarder. This requirement also applies to controlled ventilation crawls ace for buildings complying with the exception to § 150.0 d . § 150.0(g)2: Vapor Retarder. In Climate Zones 14 and 16, a Class I or Class II vapor retarder must be installed on the conditioned space side of all insulation in all exterior walls, vented attics, and unvented attics with air -permeable insulation. 150.0 Fenestration Products. Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors must have a § (q)' maximum U-factor of 0.58, or the weighted averse U-factor of all fenestration must not exceed 0.58.' Fireplaces, Decorative Gas Appliances, and Gas Log Measures: § 150.0(e)lA: Closable Doors. Masonry or factory -built fireplaces must have a closable metal or glass door covering the entire opening of the firebox. § 150.0(e)l B: Combustion Intake. Masonry or factory -built fireplaces must have a combustion outside air intake, which Is at least six square inches in area and is equipped with a readily accessible, operable, and fight -fitting damper or oombustion-air control device.' § 150.0(e)1C: Flue Damper. Masonry or factory -built fireplaces must have a flue damper with a readily accessible control.' § 150.0(e)2: Pilot Light. Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside of the bulldfng, are prohibiled. Space Conditioning, Water Heating, and Plumbing System Measures: § 110.0-§ 110.3: Certification. Heating, ventilation and air conditioning (HVAC) equipment, water heaters, showerheads, faucets, and all other regulated appliances must be certified by the manufacturer to the Enerav Commission.' § 110.2(a): HVAC Efficiency. Equipment must meet the applicable efficiency requirements in TABLE 110.2-A through TABLE 110.2-K.' Controls for Heat Pumps with Supplementary Electric Resistance Heaters. Heat pumps with supplementary electric resistance heaters § 110.2(b): must have controls that prevent supplementary heater operation when the heating load can be met by the heat pump alone; and in which the cut -on temperature for compression heating is higher than the cut -on temperature for supplementary heating, and the cut-off temperature for comiaression heating is higher than the cut-off temperaturefor suppLmentary heating.' § 110.2(c): Thermostats. All unitary heating or cooling systems not controlled by a central energy management control system (EMCS) must have a setback thermostat.' Water Heating Recirculation Loops Serving Multiple Dwelling Units. Water heating recirculation loops Serving multiple dwelling units must § 110.3(c)5: meet the air release valve, backflow prevention, pump priming, pump isolation valve, and recirculation loop connection requirements of § § 110.3(c)7: Isolation Valves. Instantaneous water heaters with an input rating greater than 6.8 kBTUihr (2 kW) must have isolation valves with hose bibbs or other fittings on both cold water and hot water lines of water healing systems to allow for water lank flushing when the valves are closed. § 110.5: Pilot Lights. Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces; household cooking appliances (appli- ances without an electrical supj2ly voltage connection with pilot lights that consume less than 150 Btu/hr are exempt); and of and spa heaters.' Building Cooling and Heating Loads. Heating and/or cooling loads are calculated in accordance with ASHRAE Handbook, Equipment § 150.0(h)1: Volume, Applications Volume, and Fundamentals Volume; SMACNA Residential Comfort System Installation Standards Manual; orACCA Manual J usinq desicn conditions specified in 6150.0fh12. § 150.0(h)3A: 2016 Low -Rise Residential Mandatory Measures Su Clearances. Installed air conditioner and heat pump outdoor condensing units must have a clearance of at least 5 feet from the outlet of any § 150.0(h)3B: Liquid Line Drier. Installed air conditioner and heat pump systems must be equipped with liquid line filter driers if required, as specified by manufacture's instructions. § 150.00)1: Storage Tank Insulation. Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water -heating systems, must have R-12 external insulation or R-16 internal insulation where the internal insulation R-value is indicated on the exterior of the tank. Water piping and cooling system line insulation. For domestic hot water system piping, whether buried or unburied, all of the following must be insulated according to the requirements of TABLE 120.3-A: the first 5 feet of hot and cold water pipes from the storage tank; all piping with a § 150.00)2A: nominal diameter of 314 inch or larger; all piping associated with a domestic hot water recirculation system regardless of the pipe diameter; piping from the heating source to storage tank or between tanks; piping buried below grade; and all hot water pipes from the heating source to kitchen fixtures' § 150.00)2B: Water piping and cooling system line insulation. All domestic hot water pipes that are buried below grade must be installed in a water proof and non -crushable casing or sleeve.' § 150.00)2C: water piping and cooling system line insulation. Pipe for cooling system lines must be insulated as specified in § 150.0032A. Distribution piping for steam and h dronic heating systems or hot waters stems must meet the requirements in TABLE 120.3-A' § 150.00)3: Insulation Protection. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Insulation Protection. Insulation exposed to weather must be installed with a cover suitable for outdoor service. For example, protected by § 150.00)3A: aluminum, sheet metal, painted canvas, or plastic cover. The cover must be water retardant and provide shielding from solar radiation that can cause degradation of the material. § 150.0(j)3B: Insulation Protection. Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space must have a Class I or Class II vaiorfetarder. Gas or Propane Systems. Systems using gas or propane water heaters to serve individual dwelling units must include all of the following: a § 150.0(n)1: 120V electrical receptacle within 3 feet of the water heater; a Category III or IV vent, or a Type B vent with straight pipe between the outside termination and the space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the water heater, and allows natural draining without ump assistance: and a gas su I line wish a oa acit of a[ least 200,000 Btulhr. § 150.0(n)2: Recirculating Loops. Recirculating loops serving multiple dwelling units must meet the requirements of § 110.3(c)5. § 150.0(n)3: Solar Water -heating Systems. Solar water -heating systems and collectors must be certified and rated by the Solar Rating and Certification C❑radiation ISRCC) or by a listing agency that is approved by the Executive Director. Ducts and Fans Measures: § 110.8(d)3: Ducts. Insulation installed on an existing space -conditioning duct must comply with § 604.0 of the California Mechanical Code (CMC). If a contractor installs the insulation, the contractor must to the customer, in writin , that the insulation meets this requirement. CMC Compliance. All air -distribution system ducts and plenums must be installed, sealed, and insulated to meet the requirements of CMC §§ 601.0, 602.0, 603.0, 604.0. 605.0 and ANSIISMACNA-006-2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition. Portions of supply -air and return -air ducts and plenums must be insulated to a minimum installed level of R-6.0 (or higher if required by CMC § 605.0) or a minimum installed level of R4.2 when entirely in conditioned space as confirmed through field verification and diagnostic testing § 150.0(m)1: (RA3.1.4.3.8). Connections of metal ducts and inner core of flexible ducts must be mechanically fastened, Openings must be sealed with mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than % inch, the combination of mastic and either mesh or tape must be used. Building cavities, support platforms for air handlers, and plenums designed or constructed with materials other than sealed sheet metal, duct board or flexible duct must not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and su 3,100rt latforms must not be compressed to cause reductions in the cross -sectional area of the ducts: Factory -Fabricated Duct Systems. Factory -fabricated duct systems must comply with applicable requirements for duct construction, § 150.0(m)2: connections, and closures; joints and seams of duct systems and their components must not be sealed with cloth back rubber adhesive duct tapes unless such tape is used in combination with mastic and draw bands. § 150.0(m)3: Field -Fabricated Duct Systems. Field -fabricated duct systems must comply with applicable requirements for: pressure sensitive tapes, mastics, sealants, and other requirements specified for duct construction. § 150.0(m)7: Backdraft Dampers. All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or automatic dampers. § 150.0(m)8: Gravity Ventilation Dampers. Gravity ventilating systems serving conditioned space must have either automatic or readily accessible, manually operated dampers in all openings to the outside except combustion inlet and outlet air openings and elevator shaft vents. Protection of Insulation. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, and § 150.0(m)9: wind. Insulation exposed to weather must be suitable for outdoor service. For example, protected by aluminum, sheet metal, painted canvas, or plastic cover. Cellular foam insulation must be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation. § 150.0(m)10: Porous Inner Core Flex Duct. Porous inner core flex duct must have a non -porous layer between the inner core and outer vapor barrier. Duct System Sealing and Leakage Test. When space conditioning systems use forced air duct systems to supply conditioned air to an § 150.0(m)11: occupiable space, the ducts must be sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, In accordance with 150.0 m 11and Reference Residential radix RA3. Air Filtration. Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal § 150.0(m)12: conditioning component, except evaporative coolers, must be provided with air filter devices that meet the design, installation, efficiency, pressure dro , and in elinq r uiremenfs of § 150.0 m 12. 2016 Low -Rise Residential Mandato I Measures Summa ninDuct System Sizing and Air Filter Grille Sizing. Spacescore ItrobegHSPP), orsystems ha permanentlyat use forced anstalled statiir ducts to o pressure p obe (PSPP) ply cooling to an inithe space must have a hole for the placement of a mustatic pre p § 150.0(m)13: supply plenum. The space conditioning system must also demonstrate airflow ? 350 CFM per ton of nominal cooling capacity through the return grilles, and an air -handling unit fan efficacy < 0.58 WICFM as confirmed by field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3.3. This applies to both single zone central forced air systems and every zone for zonally controlled central forced airs stems.' Ventilation for Indoor Air Quality. All dwelling units must meet the requirements of ASHRAE Standard 62.2. Neither window operation nor §150.0(0): continuous operation of central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of rovidin whole-buiidin ventilation. § 150.0(o)1A: Field Verification and Diagnostic Testing. Whole -building ventilation airflow must be confirmed through field verification and diagnostic festin , in accordance with Reference Residential A endix RAV. Pool and Spa Systems and Equipment Measures: Certification by Manufacturers. Any pool or spa heating system or equipment must be certified to have all of the following: a thermal efficiency § 110.4(a): that complies with the Appliance Efficiency Regulations; an an -off switch mounted outside of the heater that allows shutting off the heater without adjusting the thermostat setting; a permanent weatherproof plate or card with operating instructions; and must not use electric resistance heatin .' Piping. Any pool or spa heating equipment must be installed with at least 36 inches of pipe between the filter and the heater. or dedicate suction and return lines, or built-in or built u conneclians to allow for future solar heatin § 110.4(b)1; . § 110.4(b)2: Covers. Outdoor pools or spas that have a heat pump or gas heater must have a cover. § 110.4(b)3: Directional inlets and time switches for pools. Pools must have directional inlets that adequately mix the pool water, and a time switch that will allow all um to be set or r rammed to run onl durn' off- -peak electric demand periods. § 110.5: Pilot Light. Natural gas pool and spa heaters must not have a continuously burning pilot light. Pool Systems and Equipment Installation. Residential pool systems or equipment must meet the specified requirem 150.0ents for pump sizing, flow § (p)' rate. 6jNna. filters, and valves,' Lighting Measures: Lighting Controls and Components. All lighting control devices and systems, ballasts, and luminaires must meet the applicable requirements § 110.9: JA8 High Efficacy Light Sources. To qualify as a JA8 high efficacy light source for compliance with § 150.0(k), a residential light source must be certified to the Ener Commission aocordin to Reference Joint Appendix JA8. § 150.0(k)1A: Luminalre Efficacy. All installed luminaires must be high efficacy in accordance with TABLE 150.0-A. Blank Electrical Boxes. The number of electrical boxes that are more than 5 feet above the finished floor and do not contain a luminaire or § 150.0(k)1 B: other device must be no greater than the number of bedrooms. These electrical boxes must be served by a dimmer, vacancy sensor control, or fans 3eed control. Recessed Downlight Luminaires in Ceilings. Luminaires recessed into ceilings must meet all of the requirements for: insulation contact (IC) § 150,0(k)1C: labeling; air leakage; sealing; maintenance; and socket and light source as described in § 150,0(k)1C. A JA8-2016-E light source rated for elevated lem erasure must be installed b final ins ection in all recessed downli ht luminaires 'in ceilin s. § Electronic Ballasts. ballasts for fluorescent lamps rated Q watts or greater must be electronic and must have an output frequency no less than 150.0(k)1 D: 20 kHz. Night Lights. Permanently in night lights and night lights integral to installed luminaires or exhaust fans must be rate to consume no § 150.0(k)1 E: more than 5 watts of power per luminaire or exhaust fan as determined in accordance with § 130.0(c). Night lights do not need to be controlled bir vacancY sensors. 150,0 k 1 F: Lighting Integral to Exhaust Fans. Lighting integral to exhaust fans (except when instn exhaust hoods by the manufacturer in kitche § () must meet the a licable r uirements of 150.0 k .' ight luminaires in ceilings and must contain lamps that comply Screw based luminaires. Screw based luminaires must not be recessed downl § 150.0(k)1G: with Reference Joint Appendix JA8. Installed lamps must be marked with'JA8-2016' or "JA8-2016-E" as specified In Reference Joint Appendix JA8.' § 150.0(k)1 H: Enclosed Luminaires. Light sources installed in enclosed luminaires must be JA8 compliant and must be marked with'JA8-2016-E. t comply with NEMA SSL 7A. § 150.0(k)2A: Interior Switches and Controls. All forward phase cut dimmers used with LED light sources mus § 150.0(k)2B: Interior Switches and Controls. Exhaust fans must be switched separately from lighting systems.' § 150.0(k)2C: Interior Switches and Controls. Luminaires must be switched with readily accessible controls that permit the luminaires to be manually switched GN and OFF. § 150.0(k)2D: Interior Switches and Controls. Controls and equipment must be installed in accordance with manufacturer's instructions. Interior Switches and Controls. N❑ control must bypass a dimmer or vacancy sensor function if the control is installed to comply with § 150.0(k)2E: i50 0 k § 150.0(k)2F: Interior Switches and Controls. Lighting controls must comply with the applicable requirements of § 110.9. Interior Switches and Controls. An energy management control system (FMCS) may be used to comply with dimmer requirements if it § 150.0(k)2G: functions as a dimmer according to § 110.9; meets the Installation Certificate requirements of § 130.4; meets the EMCS requirements of § 130.5 ; and meets all other re uirements in 150.0 11112. Interior Switches and Controls. An EMCS may be used to comply with vacancy sensor requirements in § 150.0(k) if it meets all the u § 150.0(k)2H: following: it functions as a vacancy sensor according to § 110.9; the Installation Certificate requirements of § 130.4; the EMCS requirements of § 130.5 ;and all other requirements in 150.0 k 2. § 150.0(k)21: Interior Switches and Controls. A multiscene programmable controller may De used to comply with dimmer requirements in § 150.0(k) if it r,rnvides the functionality of a dimmer acoordin to 110.9. and com lip with all other a licable re uirements in 150.0 k 2. rnmary arikk 16 Low -Rise Residential Mandato Measures a ueju 20rooms, and utility rooms, at least one luminaire in each of these spaces muss Interior Switches and Controls. In bathrooms, garages, laundry liant with § 150.0(k)2J: sensors must contrat all luminaires required to have light sources comp be controlled b a vacanc sensor. Interior Switches and Controls. Dimmers or vacancy § 150.0(k)2K: Reference Joint A endix JAB, eXce t luminaires in tc�asmust be shwitched separately lightingfromuos lastherlsystems.a § 150.0(k)2L: Interior Switches and Controls. Undercabinet fig 9 rmanently mounted to a residential building, or la other Residential Outdoor Lighting. For single-tamily residential buildings, outdoor lighting pe 150.0 k 3Ai (ON and OFF switch) and the requirements in either item buildings on the same lot, mustt mioetsenthe sor) o atom §tn item(§ ( ) d 150.0 k 3Aiii (photo control and automatic time switch control, astranamicai time clock, °t § 150.0(k)3A: § 150.0(k)3Aii (photocell an with FMCS . culdoo r site must comply Outdoor t[ghting. For tow -rise multifamily re sdand re d�en�tiail carporisrwithtless thanof ne eigvate ht vehicles a site balconies Residential lighting for residential parking lot § 150.0(k)3B: and porches; and outdoor Jig g regulated by w rise residential buildings with four or more dwe9lli 93Qt; 2 y30i4h140.7 and 41.0. either 150.0 k 3A or with the a lido ter uirements in 110.9,130.0, 130.2.13 014.140, and Residential Outdoor Lighting. For licable re uirements in 11 § 150.0(k)3C: 150.0 k 3B or 150.0 k 3D must com 1 with the a 140.7.and 141.0. Outdoor lighting for residential parking lots and residential carports with a total of eight or more Residential outdoor Lighting. ficable re I with 140.8; or must consume no more than 5 watts of § 150.0(k)3D: vehicles or site must cc m I witthe ainiernaHy itluminatedtaddress s gn mustcomplyy 130.§, Intern fly illuminated addresssigns. 150.0(k)4: era es for eight or more vehicles must comply with the § ewer as determined accordin to i30A o Residential Garages for Eight or More Vehicles. Lighting for r130 Idiingsalnia9o111Lw-rise multifamily residential building where the total interior § 150.0(k)5: a licable r uirements for nonresidentialfti Family Res'dentlal 30 0 13101 ,13 low-ri a and 14l A. Interior Cornm°n Areas of Low-rise M permanently installed lighting for the interior common areas in that common area in a single building equals 20 percent or less of the floor area, p buitdin must be hi h eifica luminaires and controlled b an occu ant sense permanently installed lighting in that building must: of Low-rise Multi -Family Residential Buildings. areaap low -al multifamily residential building where the total interior Interior Common Aregas percent of the f at least common area in a single building equals more than 0 9 P 30.0, 130.1, 140.6 and 141.0; and rower in each space by § 150.0(k)6B: i Comply with the applicable requirements in § occupant sensors that reduce the lighting p 'it. Lighting installed in corridors and stairwells must be controlled Ii P ress. rcenl. The occu ant sensors must be ca able of turnip the li h1 full on and off from all dssi red albs of tin ress a re the 50 residences and who Solar Ready Buildings: must comply with the to faros. residences located in subdivisions with ten yes �nfflrcement agency Single Family Residences. Sing y for the residences has been deemed complete § 110.10(a)1: application far a tentative subdivision map 110.10(d). re uirements of 110.10 b thou h 1rise lin l • with the requirements of § 110._.,jy through § Pathway, smoke with access, p § 110.10(a)2: Low-rise Multifamily Buildings. Low rise multi family buildings must comply requirements adapted by a local Sol in Title 24, Part 9 or other Pails of Title 24 °r hen 5 fast and are no less than 80 square feet Minimum Area.ami s°Jar tons must have a led um fatal area as described below. The le ortin Orly z�e must �mP areas ventilation, and spacing requirements as spec jurisdiction. The solar zone total area must he comprised of areas that have no less t is tat area no less than 250 with roof areas less than or equal to 10,000 square feet °r no less than i60 square feet each for buildings With foota each for buildings and have a to § 110.10(b)1: greater than 10.000 square feet For single family residences the solar zone must be located on the tool or oveled o the 1a iof w11h the building project, and have a total area no less buildings th8 solar zone must be located on the roof ar overhang of the building, or on the cool or overhang square feet. For taw rise multi -family of anoth )erce + of th located roof area of he buildI feet of er building,in 250 cludinr Oallmsk li hi area than 15 s!o ed roofs must be oriented between 110 degrees rectutal fea270 tures, and roof north. § 110.10(b)2: Orientation. All sections of the solar zone located on steep_-sloped but not limited to: vents, chimneys, Shading. The solar zone must not contain any obstructions, g ro is above a solar zone must be located at least twice the § 110.10(b)3A: mounted ex ui men.: Shading. Any obstruction located on the oat or any other part of the building the► p 1 si n loads for roof § I10.10(b)3B: distance, measured in the horizontal plane, of the height difference between the highest point of the obsWction and the horizontal projection o eas of the foot the nearest oint of the solar zone, measured in the vertical Zane• pathway for rat Design Loads on Constnactian f3ocumenotsifF°ion. cl on documen seated as solar zm metering equipment and a p Y Structural point of § 110.10(b)4: dead load and roof live load must be clear. indicate oint of interconnection with t°f electricalservice lhefsolar one lalthe watenhea4ne s stem. laterconnection Pathways. The construction documents must indicate: a location for sere ors aIle 1p a b though nit § 110.10(c): routing of conduit from the solar zone to the p interconnection' be the main service anal � and a athwa for routin . A copy of the construction documents or a comparable document indicating the information from § 1 DocumentationP § 110.10(d): i 10.10 c must be rovided to the occu ant. trice anal must have a reserved space to atlawoa ihend f from the double pole circuit location or Main Electrical Service Panel. The main electrical service panel must have a minimum busbar ratineg II 2 amps. Main Electrical Service Panel. The main electricals P 0 e 2: breaker fora future solar electric installation. a "For vedFutspace ce must be: posttioned at the Opposite § 110.1 ( ) main circuit location; and ermane HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY I ProjeCt Name Date Pisco Residence Addition/Remodel 9/8/2017 System Name Floor Area HVAC 6,216 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 4 COIL COOLING PEAK COIL HTG. PEAK Heating System CFM Sensible Latent CFM Sensible Output perSystem 89.000 Total Room Loads 5,803 98,612 7.883 2,498 95,372 Total Output Btuh 356.000 Return Vented Lighting 0 Output Btuhls ft 57.3 Return Air Ducts 4,646 3,641 Cooling System Return Fan 0 0 Out ut perSystem 57,800 Ventilation 932 35,180 11,504 932 43,236 Total output i3tuh 231,200 Supply Fan 0 0 Total Output Tons 19,3 Supply Air Ducts 4,646 3,641 Total Output Btuhls ft 37.2 Total Out ut s ftfion 322.6 TOTAL SYSTEM LOAD 143,086 19,394 145,889 Air System CFM per System_ 2,000 HVAC EQUIPMENT SELECTION Airflow cfm 8,000 Existing HVAC 180,414 29,482 356,000 Airflow cfm1s ft 1.29 Airflow cfm/Ton 415.2 Outside Air °% 11.7 % Total Adjusted System Output (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK 180,414 29,482 Aug 3M 356,000 Jan 1 AM Outside Air cfm/s ft 0.15 Note: values above silven at ARI condltions HEATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26 OF 64 OF 106 OF 106 OF ❑' 0. M Outside Air 932 cfm Heating Coil Supply Fan 8,000 cfm 106 °F ROOM 70 OF 70 OF 0 COOLING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Cooling Peak 112/78OF 81/66°F 59/58°F 59/58°F d Outside AirAr 932 cfm Cooling Coil Supply Fan / 59 OF 8,000 8,000 cfm 53.6 % ROOM ffl 77 / 65 OF 76 / 64 IF T I I U EnergyPro 7.1 by EnergySoR User Number: 6712 /D: Page 19 of 33 ROOM LOAD SUMMARY Project Name Dale Pisco Residence Addition/Remodel 9/8/2017 System Name Floor Area HVAC 6,216 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG, PEAK Zone Name Room Name Mult. CFM Sensible Latent CFM Sensible Latent CFM Sensible Residence -1st Fir Existing 1st Floor 1 3,798 64,531 6,099 3,798 64,531 6,099 1.681 64,188 1stFlr.Addition Addition -1st Floor 1 1,019 17,319 580 1,019 17,319 580 405 15,456 Exist. Second Floor Exist. 2nd Floor 1 929 15,789 1,078 929 15,789 1,078 328 IZ531 2nd Flr, Addition Addition-2ndt Floor 1 57 973 133 57 973 133 84 3,197 PAGE TOTAL H5803 96,612 7,889 2,498 95,372 TOTAL" 98,612 7,889 2,498 95,372 ' Total includes ventilation load for zonal systems, EnemyPro 7.1 by Ene Soft User Number. 6712 ID: Page 20 of 33 ROOM HEATING PEAK LOADS Project Name Pisco Residence Addition/Remodel Date 9/8/2017 ROOM INFORMATION DESIGN CONDITIONS Room Name Existing 1st Floor Floor Area 4,805.00 ft' Indoor Dry Bulb Temperature 70 OF Time of Peak Jan 1 AM Outdoor Dry Bulb Temperature 26 OF Conduction 1.064 Area X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X to Calling U•Value AT 'F = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 44 Btu/hr R-38 Roof Attic 4,397.0 0.0260 X 44 5,030 R-19 Wall 3,554.7 0.0670 X 44 10,479 Clad Wood Windows 1,384.3 0.3200 X 44 19,491 Slab -On -Grade perm = 536.0 0.7300 X 44 17,216 "R-0 Interior Wall 209.0 0.3560 X 0 0 X X X X X X X X X X X X X X X X X X X X X X X X X X Page Total / 60 ] X AT Items shown with an asterisk (') denote conduction Infiltration:[ 1.00 X Schedule Air Sensible Fraction through an interior surface X 4,805 X Area another room 9.00 X 0.355 Height ACH 52,217 = 11,971 TOTAL HOURLY HEAT LOSS FOR ROOM 64,188 Energ Pro 7.1 by Energy5oft User Number: 6712 It]: Pa a 21 of 33 ROOM HEATING PEAK LOADS Pisco Residence Addition/Remodel ROOM INFORMATION I DESIGN CONDITIONS Room Name Addition -1st Floor Time of Peak Floor Area 457.00 ft2 Outdoor Dry Bulb Temperature Indoor Dry Bulb Temperature 70 OF Conduction Area U-Value AT *F Date 9/8/2017 R-38 Roof Attic R-21 Wall (W.21.2x6.16) 1.064 457.0 X 1,560.3 X 481.3 X perim = 71.0 X 0.0260 X X X X X X X X X X X X X X X X X X 44 = = = = = = = = = = = = - = = = = = = = = = _ = = = = = = = = 44 0.0690 44 Clad Wood Windows Slab -On -Grade 0.3200 44 0.7300 44 "R-0 Interior Wall 457.0 X 0.3560 0 X X X X X X X X X X X X X X X X X X X X X X X� X X X X X X X X X X X X X X X X Items shown with an asterisk (") denote conduction Infiltration:[ E 1.00 X Sche'di,sn Air Sensible Fraction through an Interior surface to X 457 X Area Ceiling another room 9.00 X 0.355 Height ACH Page Total / 60 X AT = TOTAL HOURLY HEAT LOSS FOR ROOM Jan 1 AM 26 OF Btu/hr 523 4,737 6,777 2,281 0 14,317 1,139 15,456 22 of 33 ROOM HEATING PEAK LOADS Project Name Date Pisco Residence Addition/Remodel 9/8/2017 ROOM INFORMATION DESIGN CONDITIONS Room Name Exist. 2nd Floor Time of Peak Jan 1 AM Floor Area 849.00 ftZ Outdoor Dry Bulb Temperature 26 OF Indoor Dry Bulb Temperature 70 °F Conduction R-38 Roof Attic R-19 Wall Clad Wood Windows R-19 Floor (F. 19.2x8. 16) "R-0 Interior Wall Area LI-value AT °F X X X X X X X X X X X X X X X X X X X X X X x X X X x X X X X 0.0260 X X X X X X X X X X X X X X X X X X X X x X x x X X x X X x X 44 = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 0.0670 44 0.3200 44 0.0370 44 0.3560 0 _ Items shown with an asterisk (') denote conduction through an interior surface to another room Page Total L Infiltration:[ 1.00 X 1.064 X 849 X 9.00 X 0.355 / 60 ] X 44 = Schedule Air Sensible Area Ceiling Height ACH AT Fraction Btu/hr 971 4,031 4,696 718 0 10,416 1 2,1151 TOTAL HOURLY HEAT LOSS FOR ROOM 12,531I I trnergyPro 7.1 by Energy$oft user Number: 6712 in- 0- 013 -F 77 ROOM HEATING PEAK LOADS Project Name Pisco Residence AdditionlRemodel Date 91812017 ROOM INFORMATION DESIGN CONDITIONS Room Name Addition-2ndt Floor Floor Area 105.00 ft' Indoor Dry Bulb Temperature 70 OF Time of Peak Jan 1 AM Outdoor Dry Bulb Temperature 26 OF Conduction Area X X X X x x x x x x x x X X X X X X X X X x x x x x x x x x to Ceiling U-Value 0.0260 X X X X xL_ x x x x x� x x XE X X X X X X X X x x x x x x x x x AT OF = = = = = = = _ = = = = = = = = = = = = = = = = = = 44 Btulhr R-36 Roof Attic 105.0 44 120 R-21 Wall (W.21.2x6.16) 176.0 0.0690, 44 534 Slab -On -Grade perim = 71.0 0.7300 44 Z281 R-0 Interior wall 105.0 0.3560 0_ 0 Items shown with an asterisk (') denote conduction Infiltration:[ 1.00 X 1.064 Schedule Air Sensible Fraction through an interior surface X 105 X Area another room 9.00 X 0.355 Height ACH Page Total / 60 ] X AT 2,935 262 TOTAL HOURLY HEAT LOSS FOR ROOM 3,197 EnergyPro 7.1 by EnergySoft User Number. 6712 la: Page 24 of 33 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Pisco Residence Addition/Remodel ROOM INFORMATION DESIGN CONDITIONS Room Name Existing 1st Floor Outdoor Dry Bulb Temperature Floor Area 4, 805.00 ft' Outdoor Wet Bulb Temperature Indoor Dry Bulb Temperature 76 OF Outdoor Daifv Ranae: Opaque Surfaces R-38 Roof Attic R-19 Wall R-19 Wall R-19 Wall R-19 Wall *R-0 Interior Wall Orientation Items shown with an asterisk (*) denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Fenestration 13 K L 13 13 GG 9 GG 10 Orientation (NE) (NE) (NE) (NE) (NE) (SE) (SE) (SE) (SE) Bate 9/8/2017 Area X X X X X X X xf x U-Factor X X X X X X X X x CLTD' = = = = = = = = = 4,397.0 0.0260 56.0 906.0 0.0670 30.3 718.4 0.0670 29.3 924.1 0.0670 31.7 1,006.2 0.0670 29.3 209.0 0.3560 0.0 Page Total Shaded Unshaded 112 OF 78 OF 34 OF Btu/hr 6,402 1,841 1,412 1,961 1.976 1 13,5921 Area X X X X X X X X X GLF + + + + + + + + + Area X X X X X X X X X GLF = = = = = = = = = 0.0 15.7 48, 0 26.0 0.0 15.7 25.0 26.0 0.0 15.7 65.0 26.0 0.0 15.7 48.0 26.0 0.0 15.7 48.0 26.0 0.0 15.7 16.8 19.5 0.0 15.7 210.0 19.5 0.0 15.7 16.8 19.5 0.0 15.7 200.0 19.5 Page Total Btu/hr 1,247 650 1,689 1,247 1,247 328 4,102 328 3,907 14,745 Internal Gain Btu/hr Occupants 14.4 Occupants X 2451 Btuh/occ. - 3. Equipment 4,805 Floor Area X _ 0.50 w/sqft = Infiltration: 1,064 X 1.19 X 198.18 X 36 = Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 64,531 Latent Gain Btu/hr Occupants 14.4 Occupants X 155 Btuh/occ. 2,234 Infiltration: 4,771 X 1.79 X 198.18 X 0.00344 3,864 Air Sensible CFM ELA AIN TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 2,234 EnergyPro 7.1 by_EnergySoff User Number: 6712 Id;. Paoe 25 of 33 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Pisco Residence Addition/Remodel DESIGN CONDITIONS ROOM INFORMATION Room Name Floor Area Indoor Dry Bulb Temperature ue Surfaces Existing 1st Floor Outdoor Dry Bulb Temperature 4, 805.00 ftz Outdoor Wet Bulb Temperature 76 'F1 Outdoor Daily Range: Orientation Date 9/8/2017 Area U-Factor -� CLTD' X x = X X = X X = X X = - - -- X X = X X = X X = X X = X X = Page Total Items shown with an asterisk (") denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLI D) charlad Unshaded Fenestration GG H 12 Orientation Area GLF Area GLF 0.0 XI+ 16.8 X 19.5 = 0.0 X+ 30.4 X 19.5 = 0.0 X+ 48.0 X 19.5 = 0.0 X+ 30.4 X 19.5 = 0.0 X+ 12.0 X 19.5 = 0.0 X+ 43.2 X 19.5 = 0.0 X+ 43.2 X 19.5= 0.0 X + 27.5 X 22.1 = 0.0 X + 24.0 X 22.1 = Page Total Internal Gain _ 14.4 Occupants X 245 Btuh/occ. - Occu ants 0.50 = E ui ment 4,805 Floor Area X w/sgft Infiltration: 1.064 X 1.19 X ELA 8.18 X ❑T 3fi Air Sensible CFM TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM Latent Gain 14.4 Occupants X 155 Btuh/occ. Occupants 4,771 X 1.19 X 198.18 X 0.00344 = Infiltration: Air Sensible CFM ELA OW 112 OF 78 OF 34 OF Btulhr Btulhr 328 594 938 594 234 844 844 607 530 5,51P Btulhr 64, 531 Btulhr 3, 864 2, 234 TOTAL HOURLY LATENT HEAT GAIN FOR RODM RESIDENTIAL ROOM COOLING LOAD SUMMARY Date Project Name 9/8/2017 Pisco Residence Addition/Remodel DESIGN CONDITIONS ROOM INFORMATION 112 OF Room Name Existing 1st Floor Outdoor Dry Bulb Temperature 78 OF 76 4,805.00 ft' Outdoor Wet Bulb Temperature 34 °F Floor Area IF Outdoor Rail Range: Indoor Dry Bulb Tem erature Surfaces Orientation Area U-Factor CLTD' Btulhr X X = X X = X X = X X = X UX X = X X = X X X = X X - Page Total Items shown with an asterisk (") denote conduction through an interior surface to another room 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration R R R s T 11 18 AA U Orientation Area GLF Area GLF 0.0 X115,7+ 4.0 X 0.0 X+ 4.0 X 0.0 X+ 4.0 X 22.1 = 0.0 X+ 46.4 X 22.1 = 0.0 X+ 53.0 X 22.1 = 0.0 X+ 72.0 X 22.1 = 0.0 X0.0 + 24.0 X 23.7 = X + 12.5 X 23.7 = 0.0 X + 50.0 X 23.7 = Page Total Internal Gain �245 Btuh/occ. dccE,,nt s 14.4 Occupants X w/sqft F ui 4,605 Floor Area X 1.19 1.064 X X 198.18 X 36 x Infiltration: FL,e AT Air Sensible CFM TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM Latent Gain 155 Btuh/occ. Qccu ants _ 14.4 J Occupants X Ll 4,771 X 7.19 X 198.18 X �OY00344 = Infiltration: ELq Air Sensible CFM TOTAL HOURLY LATENT HEAT GAIN FOR ROOM Btulhr 88 88 1,024 1,169 1,589 569 296 1,186 Btulhr 3,532 18, 200 9, 028 64,531 Btulhr 2,234 3,864 2,234 77 27 of 33 RESIDENTIAL ROOM COOLING LOAD SUMMARY Date Project Name 9/8/2017 Pisco Residence Addition/Remodel DESIGN CONDITIONS ROOM INFORMATION 112 °F Room Name Existing 1st Floor Outdoor Dry Bulb Temperature 78 OF Floor Area 4,805.00 ftZ Outdoor Wet Bulb Temperature 34 °F Indoor Dry Bulb Tem erature 76 °F Outdoor Dail Ran e: Orientation Area U-Factor CLTD' a ue Surfaces X X X X = X X = X X = MU X X = X X = X X = X X = X X Page Total asterisk (`) denote conduction through an interior surface to another room. Items shown with an 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Orientation Area GLF Area GLF Fenestration 0.0 X 15.7 + 12.5 X 23 7 = AA 0.0 X 15.7 + 50.0 X 2a 7 = U 0.0 X 15.7 + 12.5 X 23.7 - - AA (NM 0.0 X 15.7 + 50.0 X 23.7 = - U 0.0 X 15.7 + 6.3 X 23.7 = P U X 15.7 + 15.0 X =N0.0 23.7 =0.0 X 15.7 + 15.0 X23.7 = N = X + X X + X = Page Total Internal Gain X 245 Btuhlocc. 14.4 Occupants Occupants X 0.50 w/sgft _ 4,805 Floor Area E. ui ment 1.064 X 1.19 X 8.18 X ` Infiltration: �� AT Air Sensible CFM TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM Latent Gain 155 Btuhlocc. Occupants 14.4 Occupants X 1.19 4,771 X X 998.18 X 0.00344 = Infiltration: Et.A AVv Air Sensible CF M TOTAL HOURLY LATENT HEAT GAIN FOR ROOM Btulhr Btulhr 296 1,186 296 1,186 149 356 356 Btulhr 3, 532 8,200 9,028 64,531 Btulhr 2,234 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Pisco Residence Addition/Remodel DESIGN GOIVDITlONS ROOM INFORMATION=AdditionOutdoor Dry Bulb Temperature Room NameOutdoor Wet Bulb Temperature Floor AreaOutdoor Dail V Ran e: Indoor Dry Bulb Temperature Opaque Surfaces R-38 Roof Attic R-21 Wall (W.21.2x6.16) R-21 Wall (W 21.2x6.16) R-21 Wall (W21.2x6.16) R-21 Wall (W 21.2x6.16) *R-0 Interior Wall Orientation 9/8/2017 U-Factor CLTD� Area 56.0 X X 30.3 = X X 29.3 = X X 31.7 = 047X100260X X X 29.3 = X X 0. XX _ XX = X X = Page Total 112 OF 78 OF 34 OF Btulhr 665 678 1 Items shown with an asterisk (*) denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded GLF Area GLF Btulhr Fenestration Orientation Area 15.7 + 55.0 X 26 0 = 1,429 B 0 0 X 15.7 45.0 X 26.0 = 1,169 V 0.0 X + 96.0 X 26.0 2,495 0.0 X 15.7 + 72.0 X 19.5 = 1,406 8 0.0 X 15.7 + 22.1 = 33 7 U 0.0 X 15.7 + 1.5 X 22.1F0.0 706 G X 15.7 + 32.0 X X 15.7 + 24.0 X 22.1 = 53060.0 0.0 X 15.7 + 32.0 XF 23.7 = 759 15.7 + 55.0 X 23.7 - 1,3040.0 XB Page Total 9,83 Btulhr Internal Gain EEEEE�l Btuh/occ. _ 1.4 Occupants X _ ocou ants X w/sgft - a57 Floor Area Equipment VJ✓ 1.19 X 18.85 X 3fi m Infiltration: 1.064 X AT Air Sensible CFM ELA 17,319 TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM Btu/hr Latent Gain 213 X 155J Btuh/occ. 1.4 _� Occupants - - - - Qccupants 368 4, 771 X 1.19 X ELA 8.85 X ❑W 0344 r Infiltration: CFM Air Sensible 21� TOTAL HOURLY LATENT HEAT GAIN FOR ROOM Pa a 29 of 33 rQ: RESIDENTIAL ROOM COOLING LOAD SUMMARY Date Project !Name 9/8/2017 Pisco Residence Addition/Remodel DESIGN CONDITIONS ROOM INFORMATION 112 OF Room Name Addition -1st Floor Outdoor Dry Bulb Temperature 78 OF 457.00 ftz Outdoor Wet Bulb Temperature 34 OF Floor Area 76 OF Outdoor Daily Range: Indoor Dry Bulb Temperature Orientation Area U-Factor CLTD' Btulhr I a ue Surfaces X X X X = X XIr = X X X X= X X= X X= X X= X X 4 Page Total 0 Items shown with an asterisk (") denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (Cl Shaded Unshaded Orientation Area GLF Area GLF Btulhr 1,186 Fenestration 0.0 X 15.7 + 50.0 X 23.7 = 1 (NM 0.0 X 15.7 + 17.0 X 23.7 = 403 BB (NMVV) 0.0 X 15.7 + 1.8 X 23.7 = 43 A (NM X X + X + X X + X X + X X + X = X + X = Page TotalEl.63 Btulhr Internal Gain 245 Btuh/occ. Occu ants 1.4 Occupants X = Eauivment 4.4 Floor Area X 0.50: w/sgft 1.064 X 1.19 X 18.85 X 36 Infiltration: ELq AT Air Sensible CFM 17,319 TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM Btulhr Latent Gain _L 213 1.4 Occupants X 155 Btuh/occ. Qccupants 368 Infiltration: 4, 771 X 1.19 X i 8.85 X ❑W 0344 = Air Sensible CFM ELA 215 TOTAL HOURLY LATENT HEAT GAIN FOR ROOM Pa a 30 of 33 FnPmvPm 7A by Ene+- ZiOu User Number: 6712 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Pisco Residence Addition/RemOdel DESIGN CONDITIONS ROOM INFORMATION Exist. 2nd Floor Outdoor Dry Bulb Temperature Room Name 849,00 ftz out Wet Bulb Temperature Floor Area 76 °F Outdoor Dall Ran e: Indoor Dry Bulb Tem stature Opaque Surfaces R-38 Roof Attic R-19 Wall R-19 Wall R-19 Wall R-19 Wall R-19 Floor (F.19.2x8.16) "R-0 Interior Wall Orientation Date 9/8/2017 Area U-Factor CLTD1 849.0 X 0.0260 X 56.0 = 340.0 X 0.0670 X 30.3 = 254.0 X 0.0670 X 29.3 = 422.0 X 0.0670 X 31.7 = 351.5 X 0.0670 X 29.3 = 441.0 X 0.0370 X h 19.0 = 209.0 X 0.3560 X j 0.0 = X X L X X = Page Total 112 OF 78 OF 34 OF Btulhr 1,236 691 499 895 690 310 0 4, 32, Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Orientation Area GLF Area GLF 26.0 = Btulhr 390 Fenestration 0 0 X 15.7 + 15.0 X cc 0.0 X 15.7 + 15.0 X 26.0 = 390 cc 0.0 X 15.7 + 55.0 X 26.0 = 1,429 6 15.7 0.0 X + 16.0 X 26.0 = 416 FF 0 0 X 15.7 + 17.5 X 19.5 = 342 GG 0 0 X 15.7 U + 17.5 X _ 19.5 - 342 GG 0 0 15.7 X + 17.5 X 19.5 - 342 GG 0.0 X 15.7 + 17.5 X 19.5 = 342 GG 15.7 0.0 X + 16.0 X22.1 a 353 Page Total 4,345 rFF Btulhr Internal Gain Occupants X EE� 245 Btuh/occ. = = 624 1,449 occu ants X Ed 0.50 w/sgftF Floor Area ui ment 36 = 1.064 X 1.19 X 5.02 X AT 1,595 Infiltration: ELA Air Sensible CFM 15,789 SENSIBLE HEAT GAIN FOR ROOM TOTAL HOURLY Btulhr Latent Gain X- 155 gtuh/ocC. = 395 2.5 Occupants occu ants _ 35.02 X 0,00344 4, 771 X 1.1 J X L� AW = 683 Infiltration: ELA Air Sensible Ci=M 39E LATENT HEAT GAIN FOR ROOM TOTAL HOURLY aanP 31 of 33 p RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Pisco Residence Addition/Remodel DE51GN ComnITIONS ROOM INFORMATION Exist. 2nd Floor Outdoor Dry Bulb Temperature Room Name Floor Area Indoor Dry Bulb nriaritatiOn Surfaces 849.00 ft2 Outdoor Wet Bulb Temperature 76 °F outdoor Dail Ran e: I I.Factor Date 9/8/2017 112 OF 78 OF 34 OF CLTD' Btulhr �Y X X X X X X X X X N�_. Page Total through an interior surface to another room. Items shown with an asterisk (")denote conduction Difference (CLTM Shaded Unshaded Temperature 1. Coaling Load Temp GLF Area GLF ientation Area 15.7 + 4.0 XM22 22.1 0-0 X 4.0 X 0.0 X 15.7 + 4.0 X = % 0.0 X 15.7 + 15.7 42.0 X= 0.0 X + 15.7 + 55.0 X = [M[M 0.0 X 15.7 12.5 = 0.0 X + 15.7 + 12.5 = M 0.0 X + 12.5 = M 0.0 X X + Page Total EEEE��72,45 Btuhlocc.iternai Galn,,,,,, X Occupants Btuh/ 7ccu ants X 849 Floor Area ui meat 1064 X 1.19 X Et A 5 p2 X ❑T 3fi Infiltration: Air SensibleCFM TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM Latent Gain Occupants X 1� Btuh/occ. 2.5 occu ants 35 r?2 X 0.00344 — 4,771 X 1.19 X ❑W Infiltration: CFM ELA Air Sensible TOTAL HOURLY LATENT HEAT GAIN FOR ROOM to: Btulhr 88 88 88 996 1,304296 1296 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Pisco Residence AdditionlRemodel CESIGN CONDITIONS ROOM INFORMATION Addrtian-2ndt Ftaor Outdoor Dry Bulb Temperature Room Name 105.00 ftZ out Wet Bulb Temperature ` Floor Area 76 °F ❑utdoor Dail Ran e: iwinnr Dry Bulb Tem erature CLTD' r)rientation D a ue 5ur{aces R-38 Roof Attic R-21 Wall (W21.24.16) R-21 Wall (W21.2x6.16) R-21 Wall (W.21.2x6.16) R-21 Wall (W.21.2x6.16) -R-0 Interior Wall Area X X X 0105,1,X X X X X X i i-Factor Date 9/8/2017 112 °F 78 OF 34 OF X 56.0 = X 30.3 = 29.3 = X 31.7 = X X 29.3 = X 0.0 = X - X - X �-- - Page Total Btulhr 1 51 Items shown with an asterisk (`) denote conduction through an interior surface to another room. Unshaded 1. Cooling Load Temperature Difference (CLTD) Shaded GLF Btulhr Area Fenestration Area GLF = + X X + X = X + X X + X X + X = X + X = X + X = X X 0+ X = X + X = Page Total Btulhr 7 Internal Gain 245 Btuhlocc. _ 17 E.3Occupants X CcE 0.50 wlsgft Floor Area X E ut 4.33 X 36 = i_Q64 X 1.79 X � �T Infiltration: CFM EI A Air sensible 9 TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM Btulhr 1551 gtuhlocC. Latent Gain X - - 0.3 Occupants occu ants 0.00344 - 1.19 X---4.33 X�_ 4,771 X Infiltration: Air Sensible CFM TOTAL HOURLY LATENT HEAT GAIN FOR ROOM Pa a 33 0 I[7: 7.1 by Fne Soft User Numder: 6712