Loading...
BRES2018-040978-495 CALLE TAMPICO Tit!/ D 4 QuiKm LA QUINTA, CALIFORNIA 92253 DESIGN & DEVELOPMENT DEPARTMENT BUILDING PERMIT Permit Type/Subtype: BUILDING RESIDENTIAL/DWELLING - SINGLE FAMILY DETACHED Application Number: BRES2018-0409 Property Address: 52075 AVENIDA NAVARRO APN: 773234015 Application Description: STEMMER / 1,738SF DWELLING Property Zoning: Application Valuation: $200,000.00 VOICE (760) 777-7125 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date: 5/10/2019 Owner: HOUSING AUTHORITY OF CITY OF P 0 BOX 1504 LA QUINTA, CA 0 Applicant: � � Contractor: JOE W STEMMER JR D CJ� L� JOE W STEMMER JR 42215 WASHINGTON ST #355 42215 WASHINGTON ST #355 PALM DESERT, CA 92211 MAY 10 2019 D PALM DESERT, CA 92211 0 (760)880-3525 CITY OF LA QUINTA Llc. No.: 605857 DESIGN & DEVELOPMENT DEPARTMENT LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 {commencing with Section 7000} of Divisio 3 of the Business and Professions Code, and my License is in full force and effect. License Cla s: License No.: 7 pates 1 Contraeto OWNER-B IL ER DECLARATION I hereby affirm under penalty of perjury at I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption, Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: (_) I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale. (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_) I, as owner of the property, am exclusively contracting with licensed contractors to construct the project. (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). (_) I am exempt under Sec. . B_&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: Lender's Address: WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: CarriitpT Policy Number:_ .'I certify that in the performance of the work for which this permit is issued, shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree at if I shoal ecome subject to the workers' compensation provisions of Sectio 37 of th or Code, I shall forthwith comply wit11,07 tho provisions. Data? r ) Appllca WARNING: FAILURE TO SECURE WOR E 'COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO RIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT: Application is hereby made to the Building Official for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application , the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above informati n is correct. I agree to comply with all city and county ordinances and state laws rel in to building construction, and hereby authorize representatives of this cittf t1ente a above- mentionedonropfrty for inspection purposes. Signature (Applicant or Date: 5/10/2019 Application Number: BRES2018-0409 Property Address: 52075 AVENIDA NAVARRO APN: 773234015 Application Description STEMMER / 1,738SF DWELLING Property Zoning: Application Valuation: $200,000.00 Applicant: JOE W STEMMER 1R 42215 WASHINGTON ST#355 PALM DESERT, CA 92211 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - y Owner: HOUSING AUTHORITY OF CITY OF P 0 BOX 1504 LA QUINTA, CA 0 Contractor: JOE W STEMMER JR 42215 WASH INGTON ST #355 PALM DESERT, CA 92211 (760)880-3525 Lic. No.:605857 -------------------------------------- Detail: 1,738 SF DWELLING - THIS PERMIT DOES NOT INCLUDE POOL, SPA, BLOCK WALLS OR DRIVEWAY APPROACH. 2016 CALIFORNIA BUILDING CODES. ;V,_lh%�71;t1�i l�ll�l'iki`•�i�:.�i°')r ;;"�)?{���: FINANCIAL INFORMATION DESCRIPTION ACCOUNT CITY AMOUNT BSAS SB1473 FEE 101-0000-20306 0 $8.00 Total Paid for BUILDING STANDARDS ADMINISTRATION BSA: $8.00 DESCRIPTION ACCOUNT CITY AMOUNT DIF - CIVIC CENTER 252-0000-43200 0 $796.00 DESCRIPTION ACCOUNT CITY AMOUNT DIF - COMMUNITY CENTER 254-0000-43200 0 $129.00 DESCRIPTION ACCOUNT CITY AMOUNT DIF - FIRE PROTECTION 257-0000-43200 0 $366.00 DESCRIPTION ACCOUNT CITY AMOUNT DIF - LIBRARIES 253-0000-43200 0 $344.00 DESCRIPTION ACCOUNT CITY AMOUNT DIF - PARK MAINTENANCE 256-0000-43200 0 $40.00 DESCRIPTION ACCOUNT CITY AMOUNT DIF - PARKS/REC 251-0000-43200 0 $2,048.00 DESCRIPTION ACCOUNT CITY AMOUNT DIF - STREET MAINTENANCE 255-0000-43200 0 $116.00 DESCRIPTION ACCOUNT CITY AMOUNT DIF - TRANSPORTATION 250-0000-43200 0 $2,842.00 Total Paid for DIF - SINGLE FAMILY ATTACHED: $6,681.00 DESCRIPTION ACCOUNT CITY AMOUNT TEMP POWER SERVICE 101-0000-42403 0 $26.68 DESCRIPTION ACCOUNT CITY AMOUNT TEMP POWER SERVICE PC 101-0000-42600 0 $18.68 Total Paid for ELECTRICAL: $45.36 DESCRIPTION ACCOUNT CITY AMOUNT RESIDENTIAL, EA ADDITION 1,000SF 101-0000-42403 0 $27.22 DESCRIPTION ACCOUNT CITY AMOUNT RESIDENTIAL, EA ADDITION 1,000SF, PC 101-0000-42600 0 $11.20 DESCRIPTION ACCOUNT CITY AMOUNT RESIDENTIAL, FIRST 1,000SF 101-0000-42403 0 $160.10 DESCRIPTION ACCOUNT CITY AMOUNT RESIDENTIAL, FIRST 1,000SF, PC 101-0000-42600 0 $52.83 Total Paid for ELECTRICAL - NEW CONSTRUCTION: $251.35 DESCRIPTION ACCOUNT CITY AMOUNT RESIDENTIAL PRECISE GRADING - CUSTOM HOME LOT <=7KSF 101-0000-42408 0 $40.02 DESCRIPTION ACCOUNT CITY AMOUNT RESIDENTIAL PRECISE GRADING - CUSTOM HOME LOT <=7KSF PC 101-0000-42600 0 $40.02 Total Paid for GRADING: $80.04 DESCRIPTION ACCOUNT I CITY AMOUNT CONDENSER/COMPRESSOR 101-0000-42402 0 $40.02 DESCRIPTION ACCOUNT CITY AMOUNT CONDENSER/COMPRESSOR PC 101-0000-42600 0 $26.68 DESCRIPTION ACCOUNT CITY AMOUNT EXHAUST HOOD 101-0000-42402 0 $13.34 DESCRIPTION ACCOUNT CITY AMOUNT EXHAUST HOOD PC 101-0000-42600 0 $5.34 DESCRIPTION ACCOUNT CITY AMOUNT FURNACE 101-0000-42402 0 $40.02 DESCRIPTION ACCOUNT CITY AMOUNT FURNACE PC 101-0000-42600 0 $26.68 DESCRIPTION ACCOUNT CITY AMOUNT VENT FAN 101-0000-42402 0 $40.02 DESCRIPTION ACCOUNT CITY AMOUNT VENT FAN PC 101-0000-42600 0 $16.02 Total Paid for MECHANICAL: $208.12 DESCRIPTION ACCOUNT CITY AMOUNT MULTI -SPECIES RESIDENTIAL 8.1-14 UNITS - 2018 UPDATE 101-0000-20310 0 $537.00 Total Paid for MULTI -SPECIES RESIDENTIAL: $537.00 DESCRIPTION ACCOUNT CITY AMOUNT NEW CONSTRUCTION PERMIT 101-0000-42400 0 $642.75 Total Paid for NEW CONSTRUCTION PERMIT: $642.75 DESCRIPTION ACCOUNT CITY AMOUNT NEW CONSTRUCTION PLAN CHECK 101-0000-42600 0 $1,360.26 Total Paid for NEW CONSTRUCTION PLAN CHECK: $1,360.26 DESCRIPTION ACCOUNT CITY AMOUNT PLAN CHECK DEPOSIT- RESIDENTIAL 101-0000-42600 1 $750.00 Total Paid for PLAN CHECK DEPOSIT - RESIDENTIAL: $750.00 DESCRIPTION ACCOUNT CITY AMOUNT BACKFLOW DEVICE 101-0000-42401 0 $13.34 DESCRIPTION ACCOUNT CITY AMOUNT BACKFLOW DEVICE PC 101-0000-42600 0 $5.34 DESCRIPTION ACCOUNT CITY AMOUNT BUILDING SEWER 101-0000-42401 0 $26.68 DESCRIPTION ACCOUNT CITY AMOUNT BUILDING SEWER PC 101-0000-42600 0 $18.68 DESCRIPTION ACCOUNT CITY AMOUNT FIXTURE/TRAP 101-0000-42401 0 $160.08 DESCRIPTION ACCOUNT CITY AMOUNT FIXTURE/TRAP PC 101-0000-42600 0 $160.08 DESCRIPTION ACCOUNT CITY AMOUNT GAS SYSTEM, 1-4 OUTLETS 101-0000-42401 0 $13.34 DESCRIPTION ACCOUNT CITY AMOUNT GAS SYSTEM, 1-4 OUTLETS PC 101-0000-42600 0 $26.68 DESCRIPTION ACCOUNT CITY AMOUNT WATER HEATER/VENT 101-0000-42401 0 $13.34 DESCRIPTION ACCOUNT CITY AMOUNT WATER HEATER/VENT PC 101-0000-42600 0 $8.00 ' Total Paid for PLUMBING FEES: $445.56 DESCRIPTION ACCOUNT CITY AMOUNT RECORDS MANAGEMENT FEE - MAJOR 101-0000-42416 0 $21.00 Total Paid for RECORDS MANAGEMENT FEE - MAJOR: $21.00 DESCRIPTION ACCOUNT CITY AMOUNT SMI - RESIDENTIAL 101-0000-20308 0 $26.00 Total Paid for STRONG MOTION INSTRUMENTATION SMI: $26.00 DESCRIPTION ACCOUNT CITY AMOUNT TECHNOLOGY ENHANCEMENT FEE 502-0000-43611 0 $5.00 Total Paid for TECHNOLOGY ENHANCEMENT FEE: $5.00 DESCRIPTION ACCOUNT CITY AMOUNT SINGLE FAMILY DETACHED 2018 UPDATE 224-0000-20320 0 $2,310.00 Total Paid for TUMF - RESIDENTIAL: $2,310.00 PERMIT # t J �SZOI p PLAN LOCATION: Project Address: 52075 Avenida Navarro Project Description: Pool, Remodel, Add't, Elect, Plumb, Mech APN #: 773-234-015 new SFR Applicant Name: Joe W. Stemmer Jr. Construction, INC Address: 42215 Washington St, #355 ST, Zip: Palm Desert, CA 92211 Telephone: 760-880-3525 Email. jstemmer@dc.rr.com Valuation of Project $ 200,000. Contractor Name: Joe W. Stemmer Jr. Construction, INC New SFD Construction: Address:42215 Washington St, #355 Conditioned Space 1738 SF City, St, Zip Palm Desert, CA 92211 Garage 520 SF Telephone: 760-880-3525 Patio/Porch SF Email:istemmer@dc.rr.com Fire Sprinklers 2258 SF State Lie: B605857 City Bus Lic:763387 Arch/Eng Name: GLS Design Construction Type: Frame Occupancy: SFR Address:74991 Joni Dr. #9 Grading: City, St, Zip Palm Desert, CA 92260 Telephone: 760-340-3528 Bedrooms: 4 Stories:1 # Units: l Email: g1s0g1sarchitecture.corn State Lie: C 1199 1 City Bus Lie: Property Owner's Name: New Commercial / Tenant Improvements: Address: Total Building SF City, ST, Zip Construction Type: Occupancy: Telephone: Email: 78495 CALLE TAMPICO LA QUINTA, CA 92253 760-777-7000 CERTIFICATE OF COMPLIANCE �,�►{° S Desert Sands Unified School District 47950 Dune Palms Road ""3iL'h1VkFJ(''E yO ':OiA4l WE! 1£ Date: 5/1/2019 La Quinta, CA 92253 s '''° ral �Y No.: 19-01317-1 (760)771-8515 Owner: Joe Stemmer Email: Address: 52-075 Avenida Navarro Jurisdiction: La Quinta City: La Quinta Tract #: Type: Single Family Residential Lot # Street No. Street Name Sq. Feet APN Permit No. 52-075 Avenida Navarro 1738 773-234-015 C q N UJ o so U g 2d CA 2C Comments: At the present time, the Desert Sands Unified School District does not collect fees on garages/carports, covered patios/walkways, residential additions under 500 square feet, detached accessory structures (spaces that do not contain facilities for living, sleeping, cooking eating, or sanitation) or replacement mobile homes. It has been determined that the above -named owner is exempt from paying school fees at this time due to the following reason: EXEMPTION NOT APPLICABLE This certifies that school facility Tess imposed pursuant to Education Code Section 17620 and Government Code 65995 Et Seq. in the amount of $3.79 X 1738 S.F. or $6,587.02 have been paid for the property listed above and that building permits and/or Certificates of Occupancy for this square footage in the proposed project may now be issued. Fees Paid By: C ass Joe Sternmer Check No.: 504240164 Bank Name/Recipient of Certificate Telephone: 760-880-3525 Funding: Residential By Scott L. Bailey Superintendent Fee Collected/ Exempted by: Arianne Catano Certificate Fees Due: $6,587.02 Original Payment(s) Rec'd: $0.00 New Payment Rec'd: $6,587.02 Over/Under: $0.00 NOTICE: Pursuant to Government Code Section 66020(d)(1), this will serve to notify you that the 90-day approval period in which you may protest the fees or other payment identified above will begin to run from the date on which the building or installation permit for this project is issued, or from the date on which those amounts are paid to the District(s) or to another public entity authorized to collect them on the District('s) behalf, whichever is earlier. Notice to Building Department: THIS DOCUMENT VALID ONLY IF IMPRINTED WITH EMBOSSED SEAL. DOC # 2019-0079863 RECORDING REQUESTED BY Stewart Title AND WHEN RECORDED MAIL DOCUMENT TO: NAME La Quinta Housing Authority 5 k=� 78495 Calle Tampico w:narss CITY, STATE La Quinta, CA 92253 ZIP CODE 7156? 72,q - d2o-o/ 7 GRANT DEED Title of Document 03/08/2019 01:18 PM Fees: $20.00 Page 1 of 3 Recorded in Official Records County of Riverside Peter Aldana Assessor -County Clerk -Recorder "This document was electronically submitted to the County of Riverside for recording— Receipted by: MARIA #309 SPACE ABOVE FOR RECORDER'S USE ONLY Pursuant to Senate Bill 2 — Building Homes and Jabs Act (Government Code Section 27388.1 (GC)), effective January 1, 2018, a fee of seventy-five dollars ($75.00) shall be paid at the time of recording of every real estate instrument, paper, or notice required or permitted by law to be recorded, except those expressly exempted From payment of recording fees, per each single transaction per parcel of real property. The fee imposed by this section shall not exceed two hundred twenty-five dollars ($225.00). REASON FOR EXEMPTION: ® Exempt as Transfer of real property subject to imposition of documentary transfer tax. ❑ Exempt from fee under GC 27388.1 (a) (2); recorded concurrently "in connection with" a transfer subject to the imposition of documentary transfer tax (DTT). ❑ Exempt as Transfer of real property that is a residential dwelling to an owner -occupier. ❑ Exempt from fee under GC 27388.1 (a) (2); recorded concurrently "in connection with" a transfer of real property that is a residential dwelling to an owner -occupier. ❑ Exempt from fee under GC 27388.1 (a) (1); exceeds maximum fee of $225,00, ❑ Exempt from fee under GC 27388.1 (a) (1); not related to real property. THE FOLLOWING EXEMPTIONS APPLY TO CERTAIN COUNTIES INCLUDING KERN, MARIN, PLUMAS, SAN DIEGO AND SAN FRANCISCO COUNTIES: ❑ Exempt from fee under GC 27388A (a) (2); recorded "in connection with" a transfer subject to the imposition of documentary transfer tax (DTT) which was paid on document recorded on _.. _. as Document No. of the Official County Records, or ❑ Exempt from fee under GC 27388.1 (a) (1); recorded "in connection with" a transferwhere the maximum fee of $225 was reached with documents recorded on _ _ as Document No, of the Official County Records, ❑ Exempt from fee under GC 27388.1 (a) (2); recorded "in connection with" a transfer that is a residential dwelling to an owner -occupier with documents recorded on _ as Document No. .-,of the Official County Records I hereby declare under penalty of perjury that the information provided above is true and correct to the best of my knowledge and understanding. Executed this 8th day of March _ 2fft 9UPC- I V ED At Riverside CA city___ 5tato 10 2019 Signature CM OF LA QUINT'A DESIGN AND DEVELOPMENT DEPARTMENT RECORDING REQUESTED BY Stewart Title AND WHEN RECORDED MAIL DOCUMENT TO: NAME La Quinta Housing Authority STREET (, ADDRESS 78495 Calle Tampico CITY, STATE& La Quinta, CA 92253 ZIP�2ODE 0-0/7 00 GRANT DEED Title of Document SPACE ABOVE FOR RECORDER'S USE ONLY e Pursuant to Senate Bill 2 — Building Homes and Jobs Act (Government Code Section 273$8.1 (GC)), effective January 1,e time of recording of every real estate instrument, paper, or 2018. a fee of seventy-five dollars ($75.00) shall be paid at the notice required or permitted by law to be recorded, except those expressly exempted from payment of recording fees, per each single transaction per parcel of real property. The fee Imposed by this section shall not exceed two hundred twenty-five dollars ($225.00). REASON FOR EXEMPTION: ® Exempt as Transfer of real property subject to imposition of documentary transfer tax. ❑ Exempt from fee under GC 27388.1 (a) (2); recorded concurrently "in connection with" a transfer subject to the imposition of documentary transfer tax (DTT). ❑ Exempt as Transfer of real property that is a residential dwelling to an owner -occupier. ❑ Exempt from fee under GC 27388.1 (a) (2); recorded concurrently "in connection with" a transfer of real property that is a residential dwelling to an owner -occupier. ❑ Exempt from fee under GC 27388.1 (a) (1); exceeds maximum fee of $225.00. ❑ Exempt from fee under GC 27388.1 (a) (1); not related to real property. THE FOLLOWING E]tEMPTfONS APPLY TO CERTAIN COUNTfE5 INCLUDING KERN MARIN PLUMAS SAN DIEGO AND SAN 1-KANCI5CO COUNTIES: ❑ Exempt from fee under GC 27388.1 (a) (2); recorded "in connection with" a transfer subject to the imposition of documentary transfer tax (DTT) which was paid on document recorded on — .- —_ of the Official County Records, or as Document No. ❑ Exempt from fee under GC 27388.1 (a) (1); recorded "in connection with" a transfer where the maximum fee of $225 was reached with documents recorded on as Document No. Records. of the Official County ❑ Exempt from fee under GC 27388.1 (a) (2); recorded "in connection with" a transfer that is a residential dwelling to an owner -occupier with documents recorded on as Document No. County Records. - of the Official I hereby declare under penalty of perjury that the information provided above is true and correct to the best of my knowledge and understanding. Executed this 8th day of_March At Riverside 2019 CA City State Signature '4. RECORDING REQUESTED BY: < Tv- MAIL TAX STATEMENTS AND WHEN RECORDED MAIL TO: LA QUINTA HOUSING AUTHORITY 78495 CALLE TAMPICO LA QUINTA, CA 92253 APN: 773-234-015 SPACE ABOVE fI IIS UNE iS FUR RECORDER'S USE EXEMPT FROM RECORDERS FEE PURSUANT TO GOVERNMENT CODE SECTIONS 27383 AND 6103 GRANT DEED For valuable consideration, receipt of which is hereby acknowledged, LA QUINTA HOUSING AUTHORITY, a Public Body Corporate and Politic hereby GRANT(S) to JOE W. STEMMER, JR. CONSTRUCTION, a California corporation the real property situated in the County of Riverside, State of California, more particularly described as follows: LOT 4, BLOCK 93 OF SANTA CARMELITA AT VALE LA QUINTA, UNIT NO. 11, AS PER MAP RECORDED -IN BOOK 18, PAGE 75 OF MAPS, RECORDS OF RIVERSIDE COUNTY, CALIFORNIA LA QUINTA HOUSING AUTHORITY, a Public Body Dated: 02 ATTEST: Monika Radeva,*thority cretary APPROVED AS TO FORM RUTAN & TUCKER, LLP William H. Ihrke, Authority Counsel MAIL TAX STATEMENTS AS DIRECTED ABOVE A notary public or other officer completing this certificate verifies only the identity of the individual who signed the document to which this certificate is attached, and not the truthfulness, accuracy, or validity of that document. STATE OF CALIFORNIA ) COUNTY OF �ySZ�I� ) SS On Rat malq before me, Angela Ferreira, Notary Public, personally appeared Frank J Spevacek, who proved to me on the basis of satisfactory evidence to be the person whose name is subscribed to the within instrument and acknowledged to me that he executed the same in his authorized capacity, and that by his signature on the instrument the person, or the entity upon behalf of which the person acted, executed the instrument. I certify under PENALTY OF PERJURY under the laws of the State of California that the foregoing paragraph is true and correct. WITNESS my hand and official seal Signature �EkK C -'�— - 1 ANGELA FERREIRA-' Commission # 2104060 z Notary Public -California ~ Riverside County M Comm. Expires Apr 17, 2019 BOE-502-A (P1) REV. 12 (05-13) PRELIMINARY CHANGE OF OWNERSHIP REPORT To be completed by transferee (buyer) prior to a transfer of subject property, in accordance with section 480.3 of the Revenue and Taxation Code, A Preliminary Change of Ownership Report must be filed with each conveyance in the County Recorder's office for the county where the property is located, NAME AND MAILING ADDRESS OF BUYER/TRANSFEREE ASSESSOR'S PARCEL NUMBER (Make necessary corrections to the printed name and mailing address) 773-234-015-6 TRA: 020-017 Joe W. Stemmer, Jr. Construction Inc., a California SELLER/TRANSFEROR Corporation , La Quinta Housing Authority, a public body, corporate _and politic pe" 1 BUYER'S DAYTIME TELEPHONE NUMBER ( 760 ) 880-3525 BUYER'S EMAIL ADDRESS jstemmer@dc.rr.com STREET ADDRESS OR PHYSICAL LOCATION OF REAL PROPERTY: Vacant Land APN 773-234-015-6 , La Quinta, CA 92253 MAIL PROPERTY TAX INFORMATION TO (NAME) Joe W. Stemmer, Jr. Construction Inc., a California Corporation ADDRESS CITY STATE ZIP CODE 42215 Washington Street Palm Desert 92211 ❑ YES 0 NO This property is intended as my principal residence. If YES, please indicate the date of MO DAY YEAR occupancy or intended occupancy. PART 1. TRANSFER INFORMATION Please complete all statements YES HQ This section contains possible exclusions from reassessment for certain types of transfers. ❑ A. This transfer is solely between spouses (addlHon or removal of a spouse, death of a spouse, divorce settlement, etc.) ❑ B. This transfer is solely between domestic partners currently registered with the California Secretary of State (addition or removal of a partner, death of a partner, termination settlement, etc.). ❑ *C. This is a transfer: ❑ between parent(s) and child(ren)❑ from grandparent(s) to grandchildren) ❑ *D. This transfer is the result of a cotenant's death. Date of death ❑ 111 *E. This transaction is to replace a principal residence by a person 55 years of age or older. Within the same county? I-]YesEll No ❑ F. This transaction is to replace a principal residence by a person who is severely disabled as defined by Revenue and Taxation Code Section 69.5. Within the same county? ❑ Yes El No ❑ G. This transaction is only a correction of the name(s) of the person(s) holding title to the property (e.g., a name change upon marriage), If YES, please explain: _ ❑ H. The recorded document creates, terminates, or reconveys a lender's interest in the property. ❑ I. This transaction is recorded only as a requirement for financing purposes or to create, terminate, or reconvey a security interest (e.g. cosigner), If YES, please explain _ ❑ J. The recorded document substitutes a trustee of a trust, mortgage, or other similar document. ❑ E K. This is a transfer of property, ❑ E 1, to/from a revocable trust that may be revoked by the transferor and is for the benefit of ❑ the transferor, and/or ❑ the transferor's spouse ❑ registered domestic partner. ❑ E 2. to/from a trust that may be revoked by the creator/grantor/trustor who is also a joint tenant, and which names the other joint tenant(s) as beneficiaries when the creator/grantor/trustor dies. ❑ 3, to/from an irrevocable trust for the benefit of the ❑ creator/grantor/trustor and/or ❑ grantor's/trustor's spouse ❑ grantor's/trustor's registered domestic partner. ❑ L. This property is subject to a lease with a remaining lease term of 35 years or more including written options. ❑ M. This is a transfer between parties in which proportional interests of the transferor(s) and transferee(s) in each and every parcel being transferred remain exactly the same after the transfer. ❑ N. This is a transfer subject to subsidized low-income housing requirements with governmentally imposed restrictions, ❑ q1- *O. This transfer is to the first purchaser of a new building containing an active solar energy system. *Please refer to the Instructions for Part 1, Please provide any other information that will help the Assessor understand the nature of the transfer. THIS DOCUMENT IS NOT SUBJECT TO PUBLIC INSPECTION BOE-502-A (P2) REV. 12 (05-13) PART 2. OTHER TRANSFER INFORMATION Check and complete as applicable. A. Date of transfer if other than recording date: B. Type of transfer: ✓ Purchase ❑ Foreclosure ❑ Gift ❑ Trade or exchange ❑ Merger, stock, or partnership acquisition (Form BOE-100-B) ❑ Contract of Sale. Date of contract: ❑ Inheritance. Date of death: ❑ Sale/leaseback ❑ Creation of lease ❑ Assignment of a lease ❑ Termination of a lease. Date lease began: Original term in years (including written options): Remaining term in years (including written options): ❑ Other. Please explain: C. Only a partial interest in the property transferred. ❑ YES ❑ NO If YES, indicate the percentage transferred PART 3. PURCHASE PRICE AND TERMS OF SALE Check and complete as applicable. A. Total purchase price $ 60.000.0D B.. Cash down payment or value of trade or exchange excluding closing costs Amount $ C. First deed of trust @ % interest for years. Monthly payment $ Amount $ ❑ FHA (_ Discount Points) ❑ Cal -Vet ❑ VA (_Discount Points) ❑ Fixed rate ❑ Variable rate ❑ Bank/Savings & Loan/Credit Union ❑ Loan carried by seller ❑ Balloon payment $ ❑ Due date: D. Second deed of trust @ % interest for years. Monthly payment $ Amount $ ❑ Fixed rate ❑ Variable rate ❑ Bank/Savings & Loan/Credit Union ❑ Loan carried by seller ❑ Balloon payment $ ❑ Due date: E. Was an Improvement Bond or other public financing assumed by the buyer? ❑ YES ❑ NO Outstanding balance $ F. Amount, if any, of real estate commission fees paid by the buyer which are not included in the purchase price $ G. The property was purchased: ❑ Through real estate broker. Broker name: Phone number:( } ✓ Direct from seller ❑ From a family member — Relationship ❑ Other. Please explain- H. Please explain any special terms, seller concessions, broker/agent fees waived, financing, and any other information (e,g., buyer assumed the existing loan balance) that would assist the Assessor in the valuation of your property. PART 4. PROPERTY INFORMATION Check and complete as applicable. A. Type of property transferred: ❑ Single-family residence ❑ Co-op/Own-your-own Manufactured {tome ❑ Multiple -family residence, Number of units: ❑ Condominium nlmproved lot ❑ Other Description: (i.e., timber, mineral, water rights, etc.) El Timeshare Commercial/Industrial B. ❑ YES [�, NO Personal/business property, or incentives, provided by seller to buyer are included in the purchase price, Examples of personal property are furniture, farm equipment, machinery, etc. Examples of incentives are club memberships, etc, Attach list if available. If YES, enter the value of the personal/business property: $ Incentives $ C. ❑ YES [l-NO A manufactured home is included in the purchase price. If YES, enter the value attributed to the manufactured home: $ ❑ YES A NO The manufactured home is subject to local property tax price. If NO, enter decal number: D. Cl YES dM,,NO The property produces rental or other income. If YES, the income is from: ❑ Lease/rent ❑ Contract ❑ Mineral rights ❑ Other: E. The condition of the property at the time of sale was: ❑ Good ❑ Average ❑ Fair ❑ Poor Please describe: CERTIFICATION I certify Tiliq rdoclA j that the foregoing and sllinformation hereon, hicluding any accompanying statements ordocuments, is truo and torte t tb I R�rny knowledge and belief SI A UR , ANSI= OR CORPORATE OFFICER DATE ,,,,i Tint EPHONE aF 1J(JYEmTfANsF1EREE1LEGAL REPRESENTATIVE/CORPORATE OrFiCER (PLEASE PRINT y 7L I =-MAIL ADDRESS The Assessor's office may contact you for additional information regarding this transaction. • '.� III k74� kLARRY W. WARD Recorder P O. Box 751 COUNTY OF RIVERSIDE Riverside, CA 92502-0751 I = ASSESSOR -COUNTY CLERK -RECORDER (951) 486-7000 Website: www rivcrsideacr coin DOCUMENTARY TRANSFER TAX AFFIDAVIT WARNING ANY PERSON WHO MAKES ANY MATERIAL MISREPRESENTATION OF FACT FOR THE PURPOSE OF AVOIDING ALL OR ANY PART OF THE DOCUMENTARY TRANSFER TAX IS GUILTY OF A MISDEMEANOR UNDER SECTION 5 OF ORDINANCE 516 OF THE COUNTY OF RIVERSIDE AND IS SUBJECT TO PROSECUTION FOR SUCH OFFENSE. ASSESSOR'S PARCEL NO. 773 --234 --015 I declare that the documentary transfer tax for this Property Address: varaol land _ _` transaction is: $66 2 If this transaction is exempt from Documentary Transfer Tax, the reason must be identified below. I CLAIM THAT THIS TRANSACTION IS EXEMPT FROM DOCUMENTARY TRANSFER TAX BECAUSE: (The Sections listed below are taken from the Revenue and Taxation Code with the exception of items 9 and 10 which are taken from Riverside County Ordinance 516). Please check one or explain in "Other". I . ___Section 1 191 1. The consideration or value of the property, exclusive of any liens and encumbrances is $100.00 or less and there is no additional consideration received by the grantor. 2. Section 1 1911. The conveyance transfers to a revocable living trust by the grantor or from a revocable living trust to a beneficiary. 3. Section 1 1921, The conveyance was given to secure a debt. 4. Section 1 1922. The conveyance is to a governmental entity or political subdivision, 5. Section 11925. The transfer is between individuals and a legal entity or partnership, or between legal entities and does not change the proportional interests held. 6. Section 1 1926. The conveyance is to a grantee who is the foreclosing beneficiary and the consideration paid by the foreclosing beneficiary does not exceed the unpaid debt. 7. Section 1 1927. The conveyance relates to a dissolution of marriage or legal separation. (A spouse must sign a written recital in order to claim this exemption. This form may be used for that purpose.) 8. Section 1 1930. The conveyance is an inter vivos gift* or a transfer by death. *Please be aware that information stated on this document may be given to and used by governmental agencies, including the Internal Revenue Service. Also, certain gifts in excess of the annual Federal gift tax exemption may trigger a Federal Gift Tax. In such cases, the Transferor (donor/grantor) may be required to rile Form 709 (Federal Cift Tax Return) with the Internal Revenue Service. 9. Section 8. The easement is Lo.Lperpetual, permanent, or for life. 10. Section 9, The document is a lease for a term of less than (35) years (including written options.) 1 I . Other (Include explanation and legal authority) I DECLARE UNDER PENALTY OF PERJURY THAT THE FOREGOING IS TRUE AND CORRECT, Executed this 8th day of March 201g_ at —Riverside —CA — City Swte si at re' of A rant _Sfe ll Name of Firm (if appli able) For Recorder's Use: K_CMWfQrd� Printed Name of Affiant 1187{} P er e-St,41.0.0 J1:W_erside____ OAg2905— Address of Affiant (including Ctly. Srtate, and Zip Code) Telephone Number of Affiant (including area code) This form is subject to the California Public Records Act (Government Code 6250 et. seq.) Affix PCOR Label Here Building Permit Number: i Project Description. ISFR Exempt: (Materials may contain hazardous wastes and are not subject to recycling provisions) Construction Debris Management Plan Plan Submittal Date Job Site Address Owner's Name Number, Street, or PO Box City, State, Postal Code Owner's Phone Number Owner's E-Mail Address Project Manager's Name Project Manager's Phone Number I r✓iolecY ivianager's E-n,oii Address Builder / Contractor Number, Street or PO Box City, State, Postal Code Project Square Footage 5/9/2019 52075 Avenida Navarro Joe Stemmer Jr. 74478 Hwy 111 #355 Palm Desert, CA. 92260 760-880-3525 jstemnter;'a)dc,rf.� Joe Stemmer Jr. 760-880-3525 stemma mer,-idc.rr.com Joe Stemmer Jr. 42215 Washington St. #355 Palm Desert, CA. 92211 Approx. 1,715 sq ft RECEIVED MAY 10 2019 CITY Of LA QUINTA DESIGN AND DEVELOPMENT DEPARTMENT City Approval By 1 , r• � ti Renado Gouldlock,DEC/Burrtec Waste it • �1 s; r Date of City Approval 05 /' p9 Materials To Be Discarded: Product Tons Trash 7.00 Not recyclable Product Tons Asphalt 0,00 Recyclable Masonry (broken) 0.00 Recyclable Brick/Block 0.00 Recyclable Plaster 2.00 Recyclable Cardboard 0.00 Recyclable Scrap Metal 0,00 Recyclable Commingled 0.00 Recyclable Tile (floor) 0,00 Recyclable Concrete 7.75 Recyclable Tile (roof) 0.25 Recyciable Drywall 0.75 Recyclable Wood 2.75 Recyclable Donated / Reuse" 0.00 Recyclable Landscape Debris 0,00 Recyclable Describe items Totals: Ree Cle Trash Projected Diversion: 13.5 7.0 65.85% I understand it is the property owner's responsibility to submit copies of weight tickets or receipts to the District Environmental Coordinator as these hauls occur. I hereby certify that completion, implementation and adherence of the Debris Management Plan (DMP) for the above named project shall guarantee that at least 65% of the jobsite waste is diverted from landfilling. The remaining material will be recycled or reused. I will divert, for recycling or re -use, remaining materials generated from the first day of the project through the completion of the project in accordance with this plan. This DMP is issued in the name of the party owner(s) and shall remain their property throughout the construction and/or demolition proje A conlrac r ;a ing as agent of the owner may obtain a DMP for the owner. However, the DMP is still issued iri the na a of ta t(s) and the owner retains legal responsibility for ensuring that the provisions of the 4krnont dhe to. Tr(s) and general contractor shall be kept informed of the dlversio progress through repo s f sese matEi�erial from this project site must be taken to an appr ved ��lcler or transfer 1L r /" ` 1. "Iveloper I Prupen into pat@ I BUILDING ENERGY ANALYSIS REPORT CITY OF LA QUINTA BUILDING DIVISION REVIEWED FOR CODE COMPLIANCE DAT BY �. PROJECT: STEMMER RESIDENCE 52075 AVENIDA NAVARRO LA Q U I NTA, CA 92253 Project Designer: RUBEN ROMERO 74991 JONI DR #9 PALM DESERT, CA 92260 Report Prepared by: Armando Chavez 44890 SEELEY LA Q U I NTA, CA 92253 760 278.1840 Job Number: 2017-GLS-096 Date: 12/13/2018 JAN S 4 2019 The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2016 Building Energy Efficiency Standards This program developed by EnergySoft Software — www.energysoft.com. i TABLE OF CONTENTS I Cover Page 1 Table of Contents 2 Form CF-1 R-PRF-01-E Certificate of Compliance 3 Form RMS-1 Residential Measures Summary 11 Form MF-1 R Mandatory Measures Summary 12 HVAC System Heating and Cooling Loads Summary 16 EnergyPro 7.1 by EnergySoft Job Number: ID: 2017-GLS-096 User Number: 20648 1 CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD Project Name: STEMMER RESIDENCE Calculation Date/Time: 10:24, Thu, Dec 13, 2018 Calculation Description: Title 24 Analysis Input File Name: 101 - 52075 AVENIDA NAVARR0.ribd16x CF1 R-PRF-01 Page 1 of 8 GENERAL INFORMATION 01 Project Name STEMMER RESIDENCE 02 Calculation Description Title 24 Analysis 03 Project Location 52075 AVENIDA NAVARRO 04 City LA QUINTA 05 Standards Version Compliance 2017 06 Zip Code 92253 07 Compliance Manager Version BEMCmpMgr 2016.3.1 (1149) 08 Climate Zone CZ15 09 Software Version CBECC-Res 2016.3.1 (1019) 10 Building Type Single Family 11 Front Orientation (deg/Cardinal) 90 12 Project Scope Newly Constructed 13 Number of Dwelling Units 1 14 Total Cond. Floor Area (ft) 1738 15 Number of Zones 1 16 Slab Area (ft2) 1738 17 Number of Stories 1 18 Addition Cond. Floor Area(ft2) n/a 19 Natural Gas Available Yes 20 Addition Slab Area (ft2) n/a 21 Glazing Percentage (%) 19.3% COMPLIANCE RESULTS 01 Building Complies with Computer Performance 02 This building incorporates features that require field testing and/or verification by a certified HERS rater under the supervision of a CEC-approved HERS provider. 03 This building incorporates one or more Special Features shown below ENERGY USE SUMMARY 04 05 06 07 08 Energy Use (kTDV/ft2-yr) Standard Design Proposed Design Compliance Margin Percent Improvement Space Heating 0.40 2.19 -1.79 -447.5% Space Cooling 94.44 80.38 14.06 14.9% IAQ Ventilation 1.25 1.25 0.00 0.0% Water Heating 7.24 11.85 -4.61 -63.7% Photovoltaic Offset - 0.00 0.00 ---- Compliance Energy Total 103.33 95.67 7.66 7.4% Registration Number: 218-P010328866A-000-000-0000000-0000 Registration Date/Time: 2018-12-13 10:30:42 HERS Provider: CaICERTS inc CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-11302018-1149 Report Generated at: 2018-12-13 10:25:11 CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD Project Name: STEMMER RESIDENCE Calculation Date/Time: 10:24, Thu, Dec 13, 2018 Calculation Description: Title 24 Analysis Input File Name: 101 - 52075 AVENIDA NAVARRO.ribd16x ENERGY DESIGN RATING CF1 R-PRF-01 Page 2 of 8 Energy Design Rating (EDR) is an alternate way to express the energy performance of a building using a scoring system where 100 represents the energy performance of the Residential Energy Services (RESNET) reference home characterization of the 2006 International Energy Conservation Code (IECC) with California modeling assumptions. A score of zero represents the energy performance of a building that combines high levels of energy efficiency with renewable generation to"zero out' its TDV energy. Because EDR includes consideration of components not regulated by Title 24, Part 6 (such as domestic appliances and consumer electronics), it is not used to show compliance with Part 6 but may instead be used by local jurisdictions pursuing local ordinances under Title 24, Part 11 (CALGreen). As a Standard Design building under the 2016 Building Energy Efficiency Standards is significantly more efficient than the baseline EDR building, the EDR of the Standard Design building is provided for Information. Similarly, the EDR score of the Proposed Design is provided separately from the EDR value of installed PV so that the effects of efficiency and renewable energy can both be seen EDR of Standard Efficiency EDR of Proposed Efficiency I EDR Value of Proposed PV + Battery Final Proposed EDR 55.4 52.5 1 0.0 1 52.5 ❑ Design meets Tier 1 requirement of 15% or greater code compliance margin (CALGreen A4.203.1.2.1) and QII verification prerequisite. ❑ Design meets Tier 2 requirement of 30% or greater code compliance margin (CALGreen A4.203.1.2.2) and QII verification prerequisite. ❑ Design meets Zero Net Energy (ZNE) Design Designation requirement for Single Family in climate zone CZ15 (CALGreen A4.203.1.2.3) including on -site photovoltaic (PV) renewable energy generation sufficient to achieve a Final Energy Design Rating (EDR) of zero or less. The PV System and QII must be verified. Notes: • PV generation will be use REQUIRED SPECIAL FEATURES The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis. • Cool roof • Insulation below roof deck • Window overhangs and/or fins HERS FEATURE SUMMARY The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is provided in the building components tables below. Building -level Verifications: • IAQ mechanical ventilation Cooling System Verifications: • Minimum Airflow • Fan Efficacy Watts/CFM HVAC Distribution System Verifications: • Duct Sealing Domestic Hot Water System Verifications: • --None -- BUILDING - FEATURES INFORMATION 01 02 03 04 05 06 07 Number of Dwelling Number of Ventilation Number of Water Project Name Conditioned Floor Area (ft2) Units Number of Bedrooms Number of Zones Cooling Systems Heating Systems STEMMER RESIDENCE 1738 1 3 1 0 1 Registration Number: 218-Po10328866A-000-000-0000000-0000 Registration Date/Time: 2018-12-13 10:30:42 HERS Provider: CaICERTS inc CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-11302018-1149 Report Generated at: 2018-12-13 10:25:11 CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD CF1R-PRF-01 Project Name: STEMMER RESIDENCE Calculation Date/Time: 10:24, Thu, Dec 13, 2018 Page 3 of 8 Calculation Description: Title 24 Analysis Input File Name: 101 - 52075 AVENIDA NAVARRO.ribd16x ZONE INFORMATION 01 02 03 04 05 06 07 Zone Floor Area Avg. Ceiling Zone Name Zone Type HVAC System Name (ftZ) Height Water Heating System 1 Water Heating System 2 Z1 Conditioned HVAC-Z11 1738 10 DHW Sys 1 n/a OPAQUE SURFACES 01 02 03 04 05 06 07 08 Name Zone Construction Azimuth Orientation Gross Area (ft) Window & Door Area (ft2) Tilt (deg) N- 482 Z1 R-15 Wall+ 1 EPS 0 Right 482 119.976 90 E- 400 Z1 R-15 Wall+ 1 EPS 90 Front 400 88 90 S - 482 Z1 R-15 Wall+ 1 EPS 180 Left 482 85 90 W -400 Z1 R-15 Wall+ 1 EPS 270 Back 400 66 90 N - 50 Z1 R-15 Wall+ 1 EPS 0 Right 50 0 90 E -46 Z1 R-15 Wall+ 1 EPS 90 Front 46 0 90 S - 50 Z1 R-15 Wall+ 1 EPS 180 Left 50 0 90 W- 46 Z1 R-15 Wall+ 1 EPS 270 Back 46 0 90 1738 Z1 R-38 Roof Attic n/a n/a 1738 n/a n/a ATTIC 01 02 03 04 05 06 07 08 Name Construction Type Roof Rise Roof Reflectance Roof Emittance Radiant Barrier Cool Roof Attic Z1 Attic RoofZ1 Ventilated 0.2 0.86 0.88 No Yes Registration Number: 218-P010328866A-000-000-0000000-0000 Registration Date/Time: 2018-12-13 10:30:42 HERS Provider: CaICERTS inc. CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-11302018-1149 Report Generated at: 2018-12-13 10:25:11 CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD Project Name: STEMMER RESIDENCE Calculation Date/Time: 10:24, Thu, Dec 13, 2018 Calculation Description: Title 24 Analysis Input File Name: 101 - 52075 AVENIDA NAVARR0.ribd16x CFI R-PRF-01 Page 4 of 8 FENESTRATION / GLAZING 01 02 03 04 05 06 07 08 09 10 Height Area Name Type Surface (Orientation -Azimuth) Width (ft) (ft) Multiplier (ft) U-factor SHGC Exterior Shading 12080 - 5 Window N- 482 (Right-0) 12.0 8.0 1 96.0 0.33 0.25 Insect Screen (default) 12020 - 6 Window N- 482 (Right-0) 12.0 6.0 0.333 24.0 0.33 0.25 Insect Screen (default) 8080 -4 Window E- 400 (Front-90) - - 1 64.0 0.33 0.25 Insect Screen (default) 4050 - 1 Window S - 482 (Left-180) 4.0 5-0 1 20.0 0.33 0.25 Insect Screen (default) 5080 - 2 Window S - 482 (Left-180) 5.0 8.0 1 40.0 0.33 0.25 Insect Screen (default) 5050 - 3 Window S - 482 (Left-180) -- 1 25.0 0.33 0.25 Insect Screen (default) 5050 - 7 Window W -400 (Back-270) - - - 1 25.0 0.33 0.25 Insect Screen (default) 4020 - 8 Window W -400 (Back-270) ---- ---- 1 8.0 0.33 0.25 Insect Screen (default) 5050 - 9 Window W -400 (Back-270) ---- - - 1 25.0 0.33 0.25 Insect Screen (default) 4020 - 10 Window W -400 (Back-270) - - 1 8.0 0.33 0.25 Insect Screen (default) OVERHANGS AND FINS 01 02 03 04 05 06 07 08 09 10 11 12 13 14 Overhang Left Fin Right Fin Left Right Window Depth Dist Up Extent Extent Flap Ht. Depth Top Up Dist L Bot Up Depth Top Up Dist R Bot Up 12080 - 5 6 0.1 6 6 0 0 0 0 0 0 0 0 0 12020 - 6 6 0.1 6 6 0 0 0 0 0 0 0 0 0 4050 - 1 2 0.1 2 2 0 0 0 0 0 0 0 0 0 5080 - 2 2 0.1 2 2 0 0 0 0 0 0 0 0 0 Registration Number: 218-P010328866A-000-000-0000000-0000 Registration Date/Time: 2018-12-13 10:30:42 HERS Provider: CaICERTS inc. CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-11302018-1149 Report Generated at: 2018-12-13 10:25:11 CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD CFIR-PRF-01 Project Name: STEMMER RESIDENCE Calculation Date/Time: 10:24, Thu, Dec 13, 2018 Page 5 of 8 Calculation Description: Title 24 Analysis Input File Name: 101 - 52075 AVENIDA NAVARRO.ribdl6x OPAQUE SURFACE CONSTRUCTIONS 01 02 03 04 05 06 07 Total Cavity Winter Design Construction Name Surface Type Construction Type Framing R-value U-factor Assembly Layers - Cavity/Frame: R-11 /2x4 Top Chrd 2x4 Top Chord of Roof Truss @ 24 Roof Deck: Wood Siding/sheathing/decking Attic RoofZ1 Attic Roofs Wood Framed Ceiling in. O.C. R 11 0.088 Roofing: Light Roof (Asphalt Shingle) • Inside Finish: Gypsum Board Ceilings (below Cavity/Frame: R-9.1 /2x4 R-38 Roof Attic attic) Wood Framed Ceiling 2x4 @ 24 in. O.C. R 38 0.025 Over Ceiling Joists: R-28.9 insul. • Inside Finish: Gypsum Board • Cavity / Frame: R-15 / 2x4 • Sheathing / Insulation: R4 Sheathing R-15 Wall+ 1 EPS Exterior Walls 1 Wood Framed Wall 2x4 @ 16 in. O.C. R 15 0.064 Exterior Finish: 3 Coat Stucco SLAB FLOORS 01 02 03 04 05 06 07 Name Zone Area (ft2) Perimeter (ft) Edge Insul. R-value & Depth Carpeted Fraction Heated 17382 Z1 1738 0.1 None 0.8 No BUILDING ENVELOPE - HERS VERIFICATION 01 Quality Insulation Installation (QII) Not Required 02 Quality Installation of Spray Foam Insulation Not Required 03 Building Envelope Air Leakage Not Required 04 CFM50 n/a WATER HEATING SYSTEMS I 01 02 03 04 05 06 Name System Type Distribution Type Water Heater Number of Heaters Solar Fraction (%) DHW Sys 1 DHW Standard DHW Heater 1 (1) 1 0% WATER HEATERS 01 02 03 04 05 06 07 08 09 10 11 12 Input Rating / Tank Standby Heater Tank Uniform Energy Pilot I Insulation Loss / First Hour NEEA Heat Pump Tank Location Element Number Volume Factor / Energy Thermal R-value Recovery Rating / Brand / Model / or Ambient Name Type Tank Type of Units (gal) Factor / Efficiency Efficiency (Int/Ext) Eff Flow Rate Other Condition DHW Heater 1 Gas Small Storage 1 1 50 0.62 EF — 75 kBtu/hr R-0/R-0 0 n/a n/a n/a Registration Number: 218-Po10328866A-000-000-0000000-0000 Registration Date/Time: 2018-12-13 10:30:42 HERS Provider: CaICERTS inc. CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-11302018-1149 Report Generated at: 2018-12-13 10:25:11 CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD Project Name: STEMMER RESIDENCE Calculation Description: Title 24 Analysis Calculation Date/Time: 10:24, Thu, Dec 13, 2018 Input File Name: 101 - 52075 AVENIDA NAVARRO.ribd16x CF1 R-PRF-01 Page 6 of 8 SPACE CONDITIONING SYSTEMS 01 02 03 04 05 06 SC Sys Name System Type Heating Unit Name Cooling Unit Name Fan Name Distribution Name HVAC-Z11 Other Heating and Cooling System Heating Component 1 Cooling Component 1 HVAC Fan 1 Air Distribution System 1 HVAC - HEATING UNIT TYPES 01 02 03 04 Name System Type Number of Units Efficiency Heating Component 1 CntrlFurnace 1 80 AFUE HVAC - COOLING UNIT TYPES 01 02 03 04 05 06 07 08 Efficiency Name System Type Number of Units EER SEER Zonally Controlled Compressor Type HERS Verification Cooling Component 1 Pk AirCond I 11 14 Not Zonal Single Speed Cooling Component g p 9 1-hers-cool HVAC COOLING - HERS VERIFICATION 01 02 03 04 05 06 Name Verified Airflow Airflow Target Verified EER Verified SEER Verified Refrigerant Charge Cooling Component 1-hers-cool Required 350 Not Required Not Required Not Required HVAC - DISTRIBUTION SYSTEMS 01 02 03 04 05 06 07 Name Type Duct Leakage Insulation R-value Duct Location Bypass Duct HERS Verification Air Distribution System 1 DuctsAttic Sealed and tested 8 Attic None Air Distribution System 1-hers-dist HVAC DISTRIBUTION - HERS VERIFICATION 01 02 03 04 05 06 07 08 Name Duct Leakage Verification Duct Leakage Target (%) Verified Duct Location Verified Duct Design Buried Ducts Deeply Buried Ducts Low -leakage Air Handier Air Distribution System 1-hers-dist Required 5.0 Not Required Not Required Not Required Not Required n/a Registration Number: 218-P010328866A-000-000-0000000-0000 Registration Date/Time: 2018-12-13 10:30:42 HERS Provider: CaICERTS inc. CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-11302018-1149 Report Generated at: 2018-12-13 10:25:11 CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD Project Name: STEMMER RESIDENCE Calculation Date/Time: 10:24, Thu, Dec 13, 2018 Calculation Description: Title 24 Analysis Input File Name: 101 - 52075 AVENIDA NAVARR0.ribd16x CF1 R-PRF-01 Page 7 of 8 HVAC-FAN SYSTEMS 01 02 03 04 Name Type Fan Power (Watts/CFM) HERS Verification HVAC Fan 1 Single Speed PSC Furnace Fan 0.58 HVAC Fan 1-hers-fan HVAC FAN SYSTEMS - HERS VERIFICATION 01 02 03 Name Verified Fan Watt Draw Required Fan Efficiency (Watts/CFM) HVAC Fan 1-hers-fan Required 0.58 IAQ (Indoor Air Quality) FANS 01 02 03 04 05 06 Dwelling Unit IAQ CFM IAQ Watts/CFM IAQ Fan Type IAQ Recovery Effectiveness(%) HERS Verification SFam IAQVentRpt 47 0.25 Default 0 Required PROJECT NOTES ALL EXISTING AND PROPOSED INPUT DATA USED IN THIS CALCULATION WAS PROVIDED BY THE PLANS PREPARER. ANY ALTERATION OR DEVIATION FROM THIS CALCULATION WILL BE GENERAL CONTRACTOR RESPONSABILITY. Registration Number: 218-P010328866A-000-000-0000000-0000 Registration Date/Time: 2018-12-13 10,30:42 HERS Provider: CaICERTS inc. CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-11302018-1149 Report Generated at: 2018-12-13 10:25:11 CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD Project Name: STEMMER RESIDENCE Calculation Date/Time: 10:24, Thu, Dec 13, 2018 Calculation Description: Title 24 Analysis Input File Name: 101 - 52075 AVENIDA NAVARRO.ribd16x CF1 R-PRF-01 Page 8 of 8 DOCUMENTATION AUTHOR'S DECLARATION STATEMENT 1. 1 certify that this Certificate of Compliance documentation is accurate and complete. Documentation Author Name: Documentation Author Signaturr- ARMANDO CHAVEZ - Company: Signature Date: TITLE 24 OF THE DESERT 2018-12-13 10:30:26 Address: CEA/HERS Certification Identification (If applicable): 74800 Shirley #62 N.A. City/State/Zip: Phone: PALM DESERT, CA 92260 760-278-1840 RESPONSIBLE PERSON'S DECLARATION STATEMENT I certify the following under penalty of perjury, under the laws of the State of California: 1. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance. 2 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of Regulations. 3 The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application. Responsible Designer Name: Responsible Designer Signature - Ruben Romero Company: Date Signed: GLS ARCHITECTURE GROUP INC 2018-12-13 10:30:42 Address: License: 74491 JONI DR SUITE #9 N.A. City/State/Zip: Phone: Palm Desert, CA 92260 760-340-3528 Digitally signed by CaICERTS. This digital signature is provided in order to secure the content of this registered document and in noway implies Registration Provider responsibility for the accuracy of the information. Easy to Verify at CaICERTS com Registration Number: 218-P010328866A-000-000-0000000-0000 Registration Date/Time: 2018-12-13 10:30:42 HERS Provider: CaICERTS inc CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-11302018-1149 Report Generated at: 2018-12-13 10:25:11 RESIDENTIAL MEASURES SUMMARY RMS-1 Project Name STEMMER RESIDENCE Project Address 52075 AVENIDA NA VARRO LA QUINTA Building Type 10 Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration California Energy Climate Zone Total Cond. Floor Area Addition CA Climate Zone 15 1,738 n/a Date 11211312018 # of Units 1 INSULATION Construction Type Area Cavity ft) Special Features Status Roof Wood Framed Attic Slab Unheated Slab -on -Grade R 38 1,738 Add=R-11.0 Cool Roof - no insulation 1,738 Perim = 0' New New Wall Wood Framed R 15 1,597 Add=R-4.0 New Door Opaque Door - no insulation 24 New FENESTRATION Orientation Area ft2 I Total Area: 335Glazing Percentage: 19.3% New/Altered Average U-Factor: U-Fac SHGC Overhang Sidefins Exterior Shades 0.33 Status Right (N) 120.0 Front (E) 64.0 0.330 0.25 6.0 none Bug Screen 0.330 0.25 none none Bug Screen New New Left (S) 60.0 0.330 0.25 2,0 none Bug Screen New Left (S) 25.0 0.330 0.25 none none Bug Screen New Rear (M 66.0 0.330 0.25 none none Bug Screen New HVAC SYSTEMS Qty. Heating Min. Eff Cooling Min. Eff Thermostat Status 1 Central Furnace 80% AFUE Packaged Air Condition 14.0 SEER Setback HVAC DISTRIBUTION Duct Location Heating Cooling Duct Location R-Value New Status HVAC-Z1 Ducted WATER HEATING Qty. Type Ducted Attic 8.0 Gallons Min. Eff Distribution New Status 1 Small Storage Gas 50 0.62 Standard New EnerqyPro 7 1 by Ener vSoft User Number: 20648 ID: 2017-GLS-096 Pa a 11 of 16 2016 Low -Rise Residential Mandatory Measures Summary NOTE: Low-rise residential buildings subject to the Energy Standards must comply with all applicable mandatory measures, regardless of the compliance approach used. Review the respective section for more information. *Exceptions may apply. un rnai uuauia Building Envelope Measures: § 110.6(a)l: Air Leakage. Manufactured fenestration, exterior doors, and exterior pet doors must limit air leakage to 0.3 cfm/ft' or less when tested per NFRC-400 or ASTM E283 or AAMA/WDMA/CSA 101/I.S.2/A440-2011." § 110.6(a)5: Labeling. Fenestration products must have a label meeting the requirements of § 10-111(a). Field fabricated exterior doors and fenestration products must use U-factors and solar heat gain coefficient (SHGC) values from TABLES § 110.6(b): 110.6-A and 110.6-B for compliance and must be caulked and/or weatherstri ed,' § 110.7: Air Leakage. All joints, penetrations, and other openings in the building envelope that are potential sources of air leakage must be caulked, asketed, or weather stripped. § 110.8(a): Insulation Certification by Manufacturers. Insulation specified or installed must meet Standards for Insulating Material. § 110.8(g): Insulation Requirements for Heated Slab Floors. Heated slab floors must be insulated per the requirements of § 110.8(g). § 110.8(i): Roofing Products Solar Reflectance and Thermal Emittance. The thermal emittance and aged solar reflectance values of the roofing material must meet the requirements of § 110.8 i when the installation of a cool roof is specified on the CF1 R. § 110.80): Radiant Barrier. A radiant barrier must have an emittance of 0.05 or less and be certified to the Department of Consumer Affairs. Ceiling and Rafter Roof Insulation. Minimum R-22 insulation in wood -frame ceiling; or the weighted average U-factor must not exceed 0.043. Minimum R-19 or weighted average U-factor of 0.054 or less in a rafter roof alteration. Attic access doors must have permanently attached § 150.0(a): insulation using adhesive or mechanical fasteners. The attic access must be gasketed to prevent air leakage. Insulation must be installed in direct contact with a continuous roof or ceiling which is sealed to limit infiltration and exfiltration as specified in § 110.7, including but not limited to placing insulation either above or below the roof deck or on top of a drywall ceiling.* § 150.0(b): Loose -fill Insulation. Loose fill insulation must meet the manufacturer's required density for the labeled R-value, Wall Insulation. Minimum R-13 insulation in 2x4 inch wood framing wall or have a U-factor of 0.102 or less (R-19 in 2x6 or U-factor of 0.074 or § 150.0(c): less). Opaque non -framed assemblies must have an overall assembly U-factor not exceeding 0.102, equivalent to an installed value of R-13 in a wood framed assembly.* § 150.0(d): Raised -floor Insulation. Minimum R-19 insulation in raised wood framed floor or 0.037 maximum U-factor.' § 150.0(f): Slab Edge Insulation. Slab edge insulation must meet all of the following: have a water absorption rate, for the insulation material alone without facings, no greater than 0.3%; have a water vapor permeance no greater than 2.0 perm/inch; be protected from physical damage and UV light deterioration; and, when installed as part of a heated slab floor, meet the requirements of § 110.8 . Vapor Retarder. In Climate Zones 1-16, the earth floor of unvented crawl space must be covered with a Class I or Class II vapor retarder. This § 150.0(g)l: requirement also applies to controlled ventilation crawls ace for buildings complying with the exception to § 150.0(d). Vapor Retarder. In Climate Zones 14 and 16, a Class I or Class II vapor retarder must be installed on the conditioned space side of all § 150.0(g)2: insulation in all exterior walls, vented attics, and unvented attics with air -permeable insulation. 150.0 § (q)' Fenestration Products. Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors must have a maximum U-factor of 0.58; or the weighted averse U-factor of all fenestration must not exceed 0.58' Fireplaces, Decorative Gas Appliances, and Gas Log Measures: § 150.0(e)l A: Closable Doors. Masonry or factory -built fireplaces must have a closable metal or glass door covering the entire opening of the firebox. Combustion Intake. Masonry or factory -built fireplaces must have a combustion outside air intake, which is at least six square inches in area § 150.0(e)l B: and is equipped with a readily accessible, operable, and tight -fitting damper or combustion -air control device.' § 150.0(e)l C: Flue Damper. Masonry or factory -built fireplaces must have a flue damper with a readily accessible control,' Pilot Light. Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside of § 150.0(e)2: the building, are prohibited. Space Conditioning, Water Heating, and Plumbing System Measures: § 110.0-§ 110.3: Certification. Heating, ventilation and air conditioning (HVAC) equipment, water heaters, showerheads, faucets, and all other regulated appliances must be certified by the manufacturer to the Energy Commission.' § 110.2(a): HVAC Efficiency. Equipment must meet the applicable efficiency requirements in TABLE 110.2-A through TABLE 110.2-K." Controls for Heat Pumps with Supplementary Electric Resistance Heaters. Heat pumps with supplementary electric resistance heaters § 110.2(b): must have controls that prevent supplementary heater operation when the heating load can be met by the heat pump alone; and in which the cut -on temperature for compression heating is higher than the cut -on temperature for supplementary heating, and the cut-off temperature for compression heating is higher than the cut-off temperature for supplementary heating.* § 110.2(c): Thermostats. All unitary heating or cooling systems not controlled by a central energy management control system (EMCS) must have a setback thermostat.' Water Heating Recirculation Loops Serving Multiple Dwelling Units. Water heating recirculation loops serving multiple dwelling units must § 110.3(c)5: meet the air release valve, backflow prevention, pump priming, pump isolation valve, and recirculation loop connection requirements of § 110.3(c)5. § 110.3(c)7: Isolation Valves. Instantaneous water heaters with an input rating greater than 6.8 kBTU/hr (2 kW) must have isolation valves with hose bibbs or other fittings on both cold water and hot water lines of water heating systems to allow for water tank flushing when the valves are closed. Pilot Lights. Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces; household cooking appliances (appli- § 110.5: ances without an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt); and pool and spa heaters." Building Cooling and Heating Loads. Heating and/or cooling loads are calculated in accordance with ASHRAE Handbook, Equipment § 150.0(h)l : Volume, Applications Volume, and Fundamentals Volume; SMACNA Residential Comfort System Installation Standards Manual; or ACCA Manual J using design conditions specified in § 150.0(h)2. 2016 Low -Rise Residential Mandatory Measures Summary § 150.0(h)3A: Clearances. Installed air conditioner and heat pump outdoor condensing units must have a clearance of at least 5 feet from the outlet of any dryer vent. § 150.0(h)3B: Liquid Line Drier. Installed air conditioner and heat pump systems must be equipped with liquid line filter driers if required, as specified by manufacturer's instructions. § 150.00)1: Storage Tank Insulation. Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water -heating systems, must have R-12 external insulation or R-16 internal insulation where the internal insulation R-value is indicated on the exterior of the tank. Water piping and cooling system line insulation. For domestic hot water system piping, whether buried or unburied, all of the following must be insulated according to the requirements of TABLE 120,3-A: the first 5 feet of hot and cold water pipes from the storage tank; all piping with a § 150.00)2A: nominal diameter of 3/4 inch or larger; all piping associated with a domestic hot water recirculation system regardless of the pipe diameter; piping from the heating source to storage tank or between tanks; piping buried below grade; and all hot water pipes from the heating source to kitchen fixtures.' § 150.0(j)2B: Water piping and cooling system line insulation. All domestic hot water pipes that are buried below grade must be installed in a water proof and non -crushable casing or sleeve.' § 150,00)2C: Water piping and cooling system line insulation. Pipe for cooling system lines must be insulated as specified in § 150.00)2A. Distribution piping for steam and h dronic heating systems or hot waters stems must meet the requirements in TABLE 120.3-A.` § 150.00)3: Insulation Protection. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Insulation Protection. Insulation exposed to weather must be installed with a cover suitable for outdoor service. For example, protected by § 150.00)3A: aluminum, sheet metal, painted canvas, or plastic cover. The cover must be water retardant and provide shielding from solar radiation that can cause degradation of the material. § 150.00)3B: Insulation Protection. Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space must have a Class I or Class II vapor retarder. Gas or Propane Systems. Systems using gas or propane water heaters to serve individual dwelling units must include all of the following: a § 150.0(n)1: 120V electrical receptacle within 3 feet of the water heater; a Category III or IV vent, or a Type B vent with straight pipe between the outside termination and the space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the water heater, and allows natural draining without pump assistance; and a gas supply line with a capacity of at least 200,000 Btu/hr. § 150.0(n)2: Recirculating Loops. Recirculating loops serving multiple dwelling units must meet the requirements of § 110.3(c)5. § 150,0(n)3: Solar Water -heating Systems. Solar water -heating systems and collectors must be certified and rated by the Solar Rating and Certification Corporation SRCC or by a listing agency that is approved by the Executive Director. Ducts and Fans Measures: § 110.8(d)3: Ducts. Insulation installed on an existing space -conditioning duct must comply with § 604.0 of the California Mechanical Code (CIVIC). If a contractor installs the insulation, the contractor must certify to the customer, in writing, that the insulation mats this requirement. CMC Compliance. All air -distribution system ducts and plenums must be installed, sealed, and insulated to meet the requirements of CIVIC §§ 601.0, 602.0, 603.0, 604.0, 605.0 and ANSI/SMACNA-006-2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition. Portions of supply -air and return -air ducts and plenums must be insulated to a minimum installed level of R-6.0 (or higher if required by CIVIC § 605.0) or a minimum installed level of R-4,2 when entirely in conditioned space as confirmed through field verification and diagnostic testing § 150.0(m)1: (RA3.1.4.3,8), Connections of metal ducts and inner core of flexible ducts must be mechanically fastened. Openings must be sealed with mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than inch, the combination of mastic and either mesh or tape must be used. Building cavities, support platforms for air handlers, and plenums designed or constructed with materials other than sealed sheet metal, duct board or flexible duct must not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platfoLms must not be compressed to cause reductions in the cross -sectional area of the ducts.' Factory -Fabricated Duct Systems. Factory -fabricated duct systems must comply with applicable requirements for duct construction, § 150.0(m)2: connections, and closures; joints and seams of duct systems and their components must not be sealed with cloth back rubber adhesive duct tapes unless such to a is used in combination with mastic and draw bands. § 150.0(m)3: Field -Fabricated Duct Systems. Field -fabricated duct systems must comply with applicable requirements for: pressure -sensitive tapes, mastics sealants, and other requirements specified for duct construction, § 150.0(m)7: Backdraft Dampers. All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or automatic dampers, § 150,0(m)8: Gravity Ventilation Dampers. Gravity ventilating systems serving conditioned space must have either automatic or readily accessible, manually operated dampers in all o enin s to the outside, except combustion inlet and outlet air o enin s and elevator shaft vents. Protection of Insulation. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, and § 150.0(m)9: wind. Insulation exposed to weather must be suitable for outdoor service. For example, protected by aluminum, sheet metal, painted canvas, or plastic cover. Cellular foam insulation must be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation. § 150.0(m)10: Porous Inner Core Flex Duct. Porous inner core flex duct must have a non -porous layer between the inner core and outer vapor barrier. Duct System Sealing and Leakage Test. When space conditioning systems use forced air duct systems to supply conditioned air to an § 150.0(m)11: occupiable space, the ducts must be sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in accordance with § 150.0 m 11 and Reference Residential Appendix RA3. Air Filtration. Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal § 150.0(m)12: conditioning component, except evaporative coolers, must be provided with air filter devices that meet the design, installation, efficiency, pressure drop,and labeling requirements of § 150.0 m 12. 2016 Low -Rise Residential Mandatory Measures Summary Duct System Sizing and Air Filter Grille Sizing. Space conditioning systems that use forced air ducts to supply cooling to an occupiable space must have a hole for the placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPP) in the § 150.0(m)13: supply plenum. The space conditioning system must also demonstrate airflow >_ 350 CFM per ton of nominal cooling capacity through the return grilles, and an air -handling unit fan efficacy <_ 0.58 WICFM as confirmed by field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3.3. This applies to both single zone central forced air systems and every zone for zonally controlled central forced airs stems.' Ventilation for Indoor Air Quality. All dwelling units must meet the requirements of ASHRAE Standard 62.2. Neither window operation nor §150.0(o): continuous operation of central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of providing whole -building ventilation. § 150.0(o)1A: Field Verification and Diagnostic Testing. Whole -building ventilation airflow must be confirmed through field verification and diagnostic testing. in accordance with Reference Residential Ap2endix RA3.7. Pool and Spa Systems and Equipment Measures: Certification by Manufacturers. Any pool or spa heating system or equipment must be certified to have all of the following: a thermal efficiency § 110.4(a): that complies with the Appliance Efficiency Regulations; an on -off switch mounted outside of the heater that allows shutting off the heater without adjusting the thermostat setting; a permanent weatherproof plate or card with operating instructions; and must not use electric resistance heating.* § 110.4(b)1: Piping. Any pool or spa heating equipment must be installed with at least 36 inches of pipe between the filter and the heater, or dedicated suction and return lines, or built-in or built-up connections to allow for future solar heating. § 110.4(b)2: Covers. Outdoor pools or spas that have a heat pump or gas heater must have a cover. § 110.4(b)3: Directional inlets and time switches for pools. Pools must have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or programmed to run only during off-peak electric demand periods. § 110.5: Pilot Light. Natural gas pool and spa heaters must not have a continuously burning pilot light. Pool Systems and Equipment Installation. Residential pool systems or equipment must meet the specified requirements for pump sizing, flow 150.0 § (p)' rate, piping, filters, and valves.' Lighting Measures: § 110.9: Lighting Controls and Components. All lighting control devices and systems, ballasts, and luminaires must meet the applicable requirements of § 110.9.. § 110.9(e): JA8 High Efficacy Light Sources. To qualify as a JA8 high efficacy light source for compliance with § 150.0(k), a residential light source must be certified to the Energy Commission according to Reference Joint Appendix JA8. § 150.0(k)1A: Luminaire Efficacy. All installed luminaires must be high efficacy in accordance with TABLE 150.0-A. Blank Electrical Boxes. The number of electrical boxes that are more than 5 feet above the finished floor and do not contain a luminaire or § 150.0(k)1 B: other device must be no greater than the number of bedrooms. These electrical boxes must be served by a dimmer, vacancy sensor control, or fan speed control. Recessed Downlight Luminaires in Ceilings. Luminaires recessed into ceilings must meet all of the requirements for: insulation contact (IC) § 150.0(k)1C: labeling; air leakage; sealing; maintenance; and socket and light source as described in § 150.0(k)1C. A JA8-2016-E light source rated for elevated temperature must be installed by final inspection in all recessed downli ht luminaires in ceilings. § 150.0(k)1 D: Electronic Ballasts. Ballasts for fluorescent lamps rated 13 watts or greater must be electronic and must have an output frequency no less than 20 kHz. Night Lights. Permanently installed night lights and night lights integral to installed luminaires or exhaust fans must be rated to consume no § 150.0(k)1 E: more than 5 watts of power per luminaire or exhaust fan as determined in accordance with § 130.0(c). Night lights do not need to be controlled by vacancy_sensors. § 150.0(k)1 F: Lighting Integral to Exhaust Fans. Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods) must meet the applicable requirements of § 150.0(k).* Screw based luminaires. Screw based luminaires must not be recessed downlight luminaires in ceilings and must contain lamps that comply § 150.0(k)1 G: with Reference Joint Appendix JA8. Installed lamps must be marked with "JA8-2016" or "JA8-2016-E" as specified in Reference Joint Appendix JA8.' § 150.0(k)1 H: Enclosed Luminaires. Light sources installed in enclosed luminaires must be JA8 compliant and must be marked with "JA8-2016-E." § 150.0(k)2A: Interior Switches and Controls. All forward phase cut dimmers used with LED light sources must comply with NEMA SSL 7A. § 150.0(k)2B: Interior Switches and Controls. Exhaust fans must be switched separately from lighting systems." § 150.0(k)2C: Interior Switches and Controls. Luminaires must be switched with readily accessible controls that permit the luminaires to be manually switched ON and OFF, § 150.0(k)2D: Interior Switches and Controls. Controls and equipment must be installed in accordance with manufacturer's instructions. § 150.0(k)2E: Interior Switches and Controls. No control must bypass a dimmer or vacancy sensor function if the control is installed to comply with 150.0(k). § 150.0(k)2F: Interior Switches and Controls. Lighting controls must comply with the applicable requirements of § 110.9. Interior Switches and Controls. An energy management control system (EMCS) may be used to comply with dimmer requirements if it: § 150.0(k)2G: functions as a dimmer according to § 110.9; meets the Installation Certificate requirements of § 130.4; meets the EMCS requirements of § 130.5 and meets all other requirements in § 150.0(k)2. Interior Switches and Controls. An EMCS may be used to comply with vacancy sensor requirements in § 150.0(k) if it meets all of the § 150.0(k)2H: following: it functions as a vacancy sensor according to § 110.9; the Installation Certificate requirements of § 130.4; the EMCS requirements of § 130.5 f ; and all other requirements in § 150.0(k)2. § 150.0(k)21: Interior Switches and Controls. A multiscene programmable controller may be used to comply with dimmer requirements in § 150.0(k) if it provides the functionality of a dimmer according to § 110.9, and complies with all other applicable requirements in § 150.0(k)2. 2016 Low -Rise Residential Mandatory Measures Summary Interior Switches and Controls. In bathrooms, garages, laundry rooms, and utility rooms, at least one luminaire in each of these spaces must § 150.0(k)2J: be controlled by a vacancy sensor. Interior Switches and Controls. Dimmers or vacancy sensors must control all luminaires required to have light sources compliant with § 150.0(k)2K: Reference Joint A endix JA8, except luminaires in Closets less than 70 square feet and luminaires in hallways.' § 150.0(k)2L: Interior Switches and Controls. Undercabinet lighting must be switched separately from other lighting systems. Residential Outdoor Lighting. For single-family residential buildings, outdoor lighting permanently mounted to a residential building, or to other buildings on the same lot, must meet the requirement in item § 150.0(k)3Ai (ON and OFF switch) and the requirements in either item § 150.0(k)3A: § 150.0(k)3Aii (photocell and motion sensor) or item § 150.0(k)3Aiii (photo control and automatic time switch control, astronomical time clock, or EMCS. Residential Outdoor Lighting. For low-rise multifamily residential buildings, outdoor lighting for private patios, entrances, balconies, § 150.0(k)3B: and porches; and outdoor lighting for residential parking lots and residential carports with less than eight vehicles per site must comply with either 150.0 k 3A or with the applicable requirements in §§ 110.9, 130.0, 130.2. 130.4 140.7 and 141.0. Residential Outdoor Lighting. For low-rise residential buildings with four or more dwelling units, outdoor lighting not regulated by § 150.0(k)3C: 150.0 k 3B or § 150.0 k 3D must comply with the applicable requirements in 110.9. 130.0,130.2,130.4.140.7 and 141.0. Residential Outdoor Lighting. Outdoor lighting for residential parking lots and residential carports with a total of eight or more § 150,0(k)3D: vehicles per site must comply with the applicable requirementsin§§ 110.9, 130.0, 130.2 130.4 140.7 and 141.0. Internally illuminated address signs. Internally illuminated address signs must comply with § 140.8; or must consume no more than 5 watts of § 150.0(k)4: er as determined aocording to § 130.0 C , Residential Garages for Eight or More Vehicles. Lighting for residential parking garages for eight or more vehicles must comply with the § 150.0(k)5: applicable requirements for nonresidential ara es in 110.9, 130.0, 130.1 130A,140.6, and 141.0. Interior Common Areas of Low-rise Multi -Family Residential Buildings. In a low-rise multifamily residential building where the total interior § 150.0(k)6A: common area in a single building equals 20 percent or less of the floor area, permanently installed lighting for the interior common areas in that building must be high efficacy luminaires and controlled by an occupant sensor. Interior Common Areas of Low-rise Multi -Family Residential Buildings. In a low-rise multifamily residential building where the total interior common area in a single building equals more than 20 percent of the floor area, permanently installed lighting in that building must: § 150.0(k)6B: i, Comply with the applicable requirements in §§ 110.9, 130.0, 130.1, 140.6 and 141.0; and ii. Lighting installed in corridors and stairwells must be controlled by occupant sensors that reduce the lighting power in each space by at least 50 percent. The occupant sensors must be capable of turning the light fully on and off from all designed paths of ingress and egress. Solar Ready Buildings: Single Family Residences. Single family residences located in subdivisions with ten or more single family residences and where the § 110.10(a)1: application for a tentative subdivision map for the residences has been deemed complete by the enforcement agency must comply with the requirements of § 11 0.10b through § 110,10 e . § 110.10(a)2: Low-rise Multi -family Buildings. Low-rise multi -family buildings must comply with the requirements of § 110.10(b) through § 110.10(d), Minimum Area. The solar zone must have a minimum total area as described below. The solar zone must comply with access, pathway, smoke ventilation, and spacing requirements as specified in Title 24, Part 9 or other Parts of Title 24 or in any requirements adopted by a local jurisdiction. The solar zone total area must be comprised of areas that have no dimension less than 5 feet and are no less than 80 square feet each for buildings with roof areas less than or equal to 10,000 square feet or no less than 160 square feet each for buildings with roof areas § 110.10(b)1: greater than 10,000 square feet. For single family residences the solar zone must be located on the roof or overhang of the building and have a total area no less than 250 square feet. For low-rise multi -family buildings the solar zone must be located on the roof or overhang of the building, or on the roof or overhang of another structure located within 250 feet of the building, or on covered parking installed with the building project, and have a total area no less than 15 percent of the total roof area of the building excluding any skylight area." § 110.10(b)2: Orientation. All sections of the solar zone located on steep -sloped roofs must be oriented between 110 degrees and 270 degrees of true north. Shading. The solar zone must not contain any obstructions, including but not limited to: vents, chimneys, architectural features, and roof § 110.10(b)3A: mounted equipment.' Shading. Any obstruction located on the roof or any other part of the building that projects above a solar zone must be located at least twice the § 110.10(b)313: distance, measured in the horizontal plane, of the height difference between the highest point of the obstruction and the horizontal projection of the nearest point of the solar zone, measured in the vertical lane' Structural Design Loads on Construction Documents. For areas of the roof designated as solar zone, the structural design loads for roof § 110,10(b)4: dead load and roof live load must be clearly indicated on the construction documents. Interconnection Pathways. The construction documents must indicate: a location for inverters and metering equipment and a pathway for § 110.10(c): routing of conduit from the solar zone to the point of interconnection with the electrical service (for single family residences the point of interconnection will be the main servicepanel); and a pathway for routing of plumbing from the solar zone to the water -heating system. Documentation. A copy of the construction documents or a comparable document indicating the information from § 110.10(b) through § 110.10(d): 110.10 c must beprovided to the occu ant. § 110.10(e)1: Main Electrical Service Panel. The main electrical service panel must have a minimum busbar rating of 200 amps. Main Electrical Service Panel. The main electrical service panel must have a reserved space to allow for the installation of a double pole circuit § 110.10(e)2: breaker for a future solar electric installation. The reserved space must be: positioned at the opposite (load) end from the input feeder location or main circuit location; and permanently marked as "For Future Solar Electric". HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name Date STEMMER RESIDENCE 12/13/2018 System Name Floor Area HVAC-Z1 1,738 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 1 COIL COOLING PEAK CFM Sensible COIL HTG. Latent CFM PEAK Sensible Heating System _ Output perSystem 55,000 Total Room Loads 822 19,948 Return Vented Lighting 0 Return Air Ducts 1,152 Return Fan 0 Ventilation 0 0 Supply Fan 0 Supply Air Ducts 1,152 TOTAL SYSTEM LOAD 1 22,251 2,121 384 0 0 2,121 16,282 800 Total Output Btuh 55,000 Output Btuh/s ft 31.6 Cooling System 0 Output perSystem 58,000 0 Total Output (Btuh) 58,000 0 Total Output Tons 4•8 800 Total Output Btuh/s ft 33.4 17,882 Total Output s ft/Ton 359.6 Air System CFM perSystem 5,700 HVAC EQUIPMENT SELECTION Airflow cfm 5,700 4WCY406OB1000C 37,635 12,081 55,000 Airflow (cfm/s ft) 3.28 Airflow cfm/Ton 1,179.3 Outside Air %) 0.0% Total Adjusted System Output (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK 37,635 12,081 55,000 Jan 1 AM Outside Air (cfm/s ft) 0.00 Note: values above given at ARI conditions Aug 3 PM HEATING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Heating Peak 26 OF 70 OF 70 OF 110 OF ,tj Outside Air 0 cfm Supply Fan Heating Coil 110 OF 5,700 cfm 1 ROOM 70 OF 70 OF j COOLING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Cooling Peak) 111 / 78 °F 78 / 62 OF 78 / 62 OF 55 / 54 OF Outside Air Ar 0 cfm Supply Fan Cooling Coil 55 / 54 OF 5,700 cfm 41.6% ROOM 78 / 62 IF 78 / 62 IF T_ EnergyPro 7 1 by EnergySoft User Number: 20648 ID: 2017-GLS-096 Page 16 of 16