Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
BRES2019-0053
78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 Permit Type/Subtype: Application Number: Property Address: APN: Application Description: Property Zoning: Application Valuation: Applicant: SKIP LENCH P.O. BOX 450 LA QUINTA, CA 92247 Twyl 4 4 Q91A& DESIGN & DEVELOPMENT DEPARTMENT BUILDING PERMIT BUILDING RESIDENTIAL/REMODEL BRES2019-0053 53225 AVENIDA HERRERA 774053023 COOGAN / NEW KITCHEN REMODEL AND FIREPLACE REMOVAL $25,000.00 VOICE (760) 777-7125 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date: 5/29/2019 Owner: NANCY COOGAN 53225 AVENIDA HERRERA LA QUINTA, CA 92253 D / /� \ a Contractor: /���v\ RICHARD GONZALES DBA RG CONSTRUCTION 82788 OLEANDER AVENUE MAY 2 9 2019 I N DIO, CA 92201 H 0 (619)778-2231 CITY OF LA QUINTA Llc. No.: 1020500 DESIGN & DEVELOPMENT DEPARTMENT LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 {commencing with Section 70001 of Division 3 of the Business and Professions Code, and my License is in full force and effect. License Class: B License No.: 1020500 Date: / Contractor: %1��/u.�f C]0 OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: (_) I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale. (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold , within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_) I, as owner of the property, am exclusively contracting with licensed contractors to construct the project. (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). (_) I am exempt under Sec. B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name:_ Lender's Address WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier: EXEMPT Policy Number: ,44 1 certify that in the performanc2 of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if I should become subject to the workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith comply with those provisions. Date: SDI Applicant: WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT: Application is hereby made to the Building Official for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application , the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and employees for any act or omission related to the work being performed under or following issuance ofthis permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above - mentioned property for inspection purposes. Date: 2F Signature (Applicant or Agent). ^ l6 Date: 5r29J2M Application Number: Property Address: APN: Application Description: Property Zoning: Application Valuation: Applicant: SKIP LENCH P.O. BOX 450 LA QUINTA, CA 92247 BRES2019-0053 53225 AVENIDA HERRERA 774053023 COOGAN / NEW KITCHEN REMODEL AND FIREPLACE REMOVAL $25,000.00 Owner: NANCY COOGAN 53225 AVENIDA HERRERA LA QUINTA, CA 92253 Contractor: RICHARD GONZALES DBA RG CONSTRUCTION 82788 OLEANDER AVENUE INDIO, CA 92201 (619)778-2231 Llc. No.: 1020500 Detail: 294 SF ADDITION FOR NEW KITCHEN AREA, WITH 487 SF REMODEL, AND REMOVAL OF EXISTING FIREPLACE. 2016 CALIFORNIA BUILDINGCODES. FINANCIAL INFORMATION DESCRIPTION ACCOUNT CITY AMOUNT BSAS SB1473 FEE 101-0000-20306 0 $1.00 DESCRIPTION ACCOUNT CITY AMOUNT BSAS SB1473 FEE 101-0000-20306 0 $1.00 Total Paid for BUILDING STANDARDS ADMINISTRATION BSA: $2.00 DESCRIPTION ACCOUNT CITY AMOUNT DEVICES, FIRST 20 101-0000-42403 0 $26.68 DESCRIPTION ACCOUNT CITY AMOUNT DEVICES, FIRST 20 PC 101-0000-42600 0 $26.68 DESCRIPTION ACCOUNT QTY AMOUNT DEVICES/FIXTURES, ADDITIONAL 101-0000-42403 0 $64.08 DESCRIPTION ACCOUNT I CITY AMOUNT DEVICES/FIXTURES, ADDITIONAL PC 101-0000-42600 0 $16.08 Total Paid for ELECTRICAL: $133.52 DESCRIPTION ACCOUNT CITY AMOUNT 101-0000-42600 ($20.94) DESCRIPTION ACCOUNT CITY AMOUNT 101-0000-42600 ($13.34) DESCRIPTION ACCOUNT CITY AMOUNT 101-0000-42600 ($5.34) DESCRIPTION ACCOUNT CITY AMOUNT 101-0000-42600 ($13.34) DESCRIPTION ACCOUNT CITY AMOUNT 101-0000-42600 ($5.34) DESCRIPTION ACCOUNT CITY AMOUNT AIR HANDLER 101-0000-42402 0 $40.02 DESCRIPTION ACCOUNT CITY AMOUNT AIR HANDLER PC 101-0000-42600 0 $13.34 DESCRIPTION ACCOUNT CITY AMOUNT CONDENSER/COMPRESSOR 101-0000-42402 0 $40.02 DESCRIPTION ACCOUNT CITY AMOUNT CONDENSER/COMPRESSOR PC 101-0000-42600 0 $5.74 DESCRIPTION ACCOUNT CITY AMOUNT CONDENSER/COMPRESSOR PC 101-0000-42600 0 $20.94 DESCRIPTION ACCOUNT CITY AMOUNT EXHAUST HOOD 101-0000-42402 0 $13.34 DESCRIPTION ACCOUNT CITY AMOUNT EXHAUST HOOD PC 101-0000-42600 0 $5.34 DESCRIPTION ACCOUNT CITY AMOUNT VENT FAN 101-0000-42402 0 $13.34 DESCRIPTION ACCOUNT CITY AMOUNT VENT FAN PC 101-0000-42600 0 $5.34 Total Paid for MECHANICAL: $99.12 DESCRIPTION ACCOUNT CITY AMOUNT PLAN CHECK DEPOSIT - ADDITION/REMODEL 101-0000-42600 1 $125.00 Total Paid for PLAN CHECK DEPOSIT - ADDITION/REMODEL: $125.00 DESCRIPTION ACCOUNT CITY AMOUNT 101-0000-42600 ($13.34) DESCRIPTION ACCOUNT QTY AMOUNT ($13.34) 101-0000-42600 DESCRIPTION ACCOUNT QTY AMOUNT 101-0000-42600 ($26.68) DESCRIPTION ACCOUNT CITY AMOUNT 101-0000-42600 ($13.34) DESCRIPTION ACCOUNT QTY AMOUNT FIXTURE/TRAP 101-0000-42401 0 $13.34 DESCRIPTION ACCOUNT QTY AMOUNT FIXTURE/TRAP PC 101-0000-42600 0 $13.34 DESCRIPTION ACCOUNT QTY AMOUNT GAS SYSTEM, 1-4 OUTLETS 101-0000-42401 0 $13.34 DESCRIPTION ACCOUNT CITY AMOUNT GAS SYSTEM, 1-4 OUTLETS PC 101-0000-42600 0 $26.68 Total Paid for PLUMBING FEES: $0.00 DESCRIPTION ACCOUNT CITY AMOUNT RECORDS MANAGEMENT FEE - MAJOR 101-0000-42416 0 $21.00 Total Paid for RECORDS MANAGEMENT FEE - MAJOR: $21.00 DESCRIPTION ACCOUNT CITY AMOUNT REMODEL, EA ADDITIONAL 500 SF 101-0000-42400 0 $48.02 DESCRIPTION ACCOUNT CITY AMOUNT REMODEL, EA ADDITIONAL 500 SF PC 101-0000-42600 0 $38.42 DESCRIPTION ACCOUNT QTY AMOUNT REMODEL, FIRST 100 SF 101-0000-42400 0 $54.43 DESCRIPTION ACCOUNT CITY AMOUNT REMODEL, FIRST 500 SF PC 101-0000-42600 0 $148.89 Total Paid for REMODEL: $289.76 DESCRIPTION ACCOUNT CITY AMOUNT SMI - RESIDENTIAL 101-0000-20308 0 $3.25 Total Paid for STRONG MOTION INSTRUMENTATION SMI: $3.25 DESCRIPTION ACCOUNT CITY AMOUNT TECHNOLOGY ENHANCEMENT FEE 502-0000-43611 0 $5.00 Total Paid for TECHNOLOGY ENHANCEMENT FEE: $5.00 e+& (2"&a Project Address: r j� Applicant Name: 4:�5� Address: City, ST, Zip: ry Q. �aSv Telephone: �� -� 6:� Email: k) GddGp ;rdarhO cwa"( )- Arch/Eng Name: Address: , Z)p City, St, Zip Telephone: Email: E-Av-r,4 trt _ , State Lie: City Bus Lie: /'� Property Owner's Name: Address: City, ST, Zip Telephone: Email: PERMIT # I SIC PLAN LOCATION: L+-ff�ADescription: 2 0 1ef r ©Ca5 ation of Project C�sp ton Type: Grading: Bedrooms: I Stories 't, Elect, Plumb, Mech Occupancy: # Units: New Commercial / Tenant Improvements: J� Total Building SF Construction Type: Occupancy; 78495 CALLE TAMPICO LA QUINTA, CA 92253 760-777-7000 Coachella Valley Unified School District 83-733 Avenue 55, Thermal, CA 92274 (760) 398-5909 — Fax (760) 398-1224 Project Name: Nancy Ct60gan This Box For District Use Only DEVELOPER FEES PAID AREA: AMOUNT LEVEL ONE AMOUNT LEVEL TWO AMOUNT: MITIGATION AMOUNT: I COMM/rND. AMOUNr DATE: RECEIPT: CF[ECK #. INITIALS CERTIFICATE OF COMPLIANCE (California Education Code 17620) Date: May 29, 2019 Owner's Name: Nancy Coogan Phone No. Project Address: 53225 Avenida Herrera, La Quinta, CA 92253 Project Description: Room Addition APN: 774-053-023 Tract #: Type of Development: Residential X7 Commercial Total Square Feet of Building Area: 294 sq_ft. Lot #'s: Industrial Certification of Applicant/Owners: The person signing certifies that the above information is correct and makes this statement under penalty of perjury and further represents that he/she is authorized to sign on behalf of the owner/developer. Dated: / ( Signature: *********************************************************************** SCHOOL DISTRICT'S REQUIREMENTS FOR THE ABOVE PROJECT HAVE BEEN OR WILL BE SATISFIED IN ACCORDANCE WITH ONE OF THE FOLLOWING: (CIRCLE ONE) Education Code 17620 Number of Sq.Ft. Amount per Sq.Ft. Amount Collected Gov. Code Project 65995 Approval 294 EXEMPT 0.00 Building Permit Application Completed: Yes/No By: Larry Moen, Director of Facilities Certificate issued by: Leticia Torres, Facilities Ana Agreement Existing Not Subject to Fee Prior to 1/1/87 Requirement Note: Pursuant to A.B 181 any room additions or enclosures of.500 $.f. or less are exempt from developer fees. Any mobile homes being relocated or replaced within the same school district's jurisdictoin are exempt from developer fees. Section 66020 of the Government Code asserted by Assembly Bill 3081, effective January 1, 1997, requires that this District provide (1) a written notice to the project appellant, at the time of payment of school fees, mitigation payment or other exactions ("Fees"), of the 90-day period to protest the imposition of these Fees and (2) the amount of the fees. Therefore, in accordance with section 66020 of the Government code and other applicable law, this Notice shall serve to advise you that the 90-day protest period in regard to such Fees or the validity thereof, commences with the payment of the fees or performance of any other requirements as described in section 66020 of the Government code. Additionally, the amount of the fees imposed is as herein set forth, whether payable at this time or in whole or in part prior to issuance of a Certificate of Occupancy. As in the latter, the 90 days starts on the date hereof. This Certificate of Compliance is valid for thirty (30) days from the date of issuance. Extension will be granted only for good cause, as determined by the School District, and up to three (3) such extensions may be granted. \IA:,: ill,(,-,- !iW,Icc :-,I I I1.,lhc'', ", Kill _ 1111111 ill"d il-cd :-:'iIll, 11/2010 VMEsGil DATE: 5/24/ 19 ❑ APPLICANT ✓I rJURIS. JURISDICTION: City of La Quinta PLAN CHECK #.: BRES2019-0053 SET: II PROJECT ADDRESS: 53225 Avenida Herrera PROJECT NAME: Addition and Remodel for Coogan Residence ® The plans transmitted herewith have been corrected where necessary and substantially comply with the jurisdiction's building codes. ❑ The plans transmitted herewith will substantially comply with the jurisdiction's codes when minor deficiencies identified below are resolved and checked by building department staff. ❑ The plans transmitted herewith have significant deficiencies identified on the enclosed check list and should be corrected and resubmitted for a complete recheck. ❑ The check list transmitted herewith is for your information. ❑ The applicant's copy of the check list is enclosed for the jurisdiction to forward to the applicant contact person. ❑ The applicant's copy of the check list has been sent to. ® EsGil staff did not advise the applicant that the plan check has been completed. ❑ EsGil staff did advise the applicant that the plan check has been completed. Person contacted: Date contacted: 51 z� (by: ) t Mav Telephone ❑ REMARKS: By: Rich Moreno EsGil Fax In Person 5/17/19 Telephone #: Email: Enclosures: 9320 Chesapeake Drive, Suite 208 ♦ San Diego, California 92123 ♦ (858) 560-1468 ♦ Fax (858) 560-1576 Building Permit Number: Project Description: Room addition & remodel Exempt: ❑ (Materials may contain hazardous wastes and are not subject to recycling provisions) Construction Debris Management Plan Plan Submittal Datel 5/6/2019 Job Site Address) 53225 Avenida Herrera Owner's Name Number, Street, or PO Box City, State, Postal Code Owner's Phone Number Owner's E-Mail Address Steve & Nancy Coogan 53225 Avenida Herrera La Quinta, CA, 92253 206-379-1383 Project Manager's Name A. P. Lench Project Manager's Phone Number 760-578-1077 Project Manager's E-mail Address lenchdesign@aol.com Builder / Contractor Owner/Builder Number, Street or PO Box: Steve Coogan City, State, Postal Code 53225 Avenida Herrera Project Square Footage Approx. 781 sq ft (added=294 sf/remodel=487 sf) City Approval By Renado Gouldlock-DEC/Burrtec Wastef Date of City Approval o5 la Materials To Be Discarded: Product Tons Trash 2.50 Not recyclable Asphalt 0.00 Recyclable Brick/Block 0.00 Recyclable Cardboard 0.00 Recyclable Commingled 0.00 Recyclable Concrete 3.25 Recyclable Drywall 0.40 Recyclable Donated / Reuse" 0.00 Recyclable *Describe Items Totals: Recycle Trash 4.9 — 2,5 Product Masonry (broken) Plaster Scrap Metal Tile (floor) Tile (roof) Wood Landscape Debris Tons 0.00 Recyclable 0.35 Recyclable 0.00 Recyclable 0.10 Recyclable 0.04 Recyclable 0.75 Recyclable 0.00 Recyclable Projected Diversion: 66.17% I understand It is the property owner's responsibility to submit copies of weight tickets or receipts to the District Environmental Coordinator as these hauls occur. I hereby certify that completion, implementation and adherence of the Debris Management Plan (DMP) for the above named project shall guarantee that at least 65% of the Jcbsite waste is diverted from landfilling. The remaining material will be recycled or reused. I will divert, for recycling or re -use, remaining materials generated from the first day of the project through the completion of the project in accordance with this plan. This DMP is issued in the name of the property owner(s) and shall remain their property throughout the construction and/or demolition project. A contractor serving as agent of the owner may obtain a DMP for the owner. However, the DMP is still issued in the name of the property owner(s) and the owner retains legal responsibility for ensuring that the provisions of the DMP are adhered to. The property owner(s) and general contractor shall be kept informed of the diversion progress through bi-monthly reports. If self -hauling, all refuse material from this project site must be taken to an approved recycler or transfer Owner / Developer / Project Manager / Superintendant Date I BUILDING ENERGY ANALYSIS REPORT s� z2s Av614 \M PROJECT: Coogan Residence 53-225 Avenida Herrera La Quinta, CA 92253 Project Designer: Lench Design Studio, Inc. P.O. Box 450 La Quinta, Ca 92253 1]jF-c:szv9- 00S3 Report Prepared by: Joan Hacker Insu-form, Inc. 43585 Monterey Avenue, Suite 7 Palm Desert, Ca 92260 760-345-1352 Job Number: Date: 5/8/2019 CITY OF LA QUINTA BUILDING DIVISION REVIEWED FOR CODE COMPLIANCE / DATE I The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2016 Building Energy Efficiency Standards. This program developed by EnergySoft Software — www.energysoft.com. CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD Project Name: Single Fam Detached Calculation Date/Time: 10:24, Wed, May 06. 2019 Calculation Description: Title 24 Analysis Input File Name: Coogan Exist Addition.ribdl6x CF1 R-PRF-01 Page 1 of 7 GENERAL INFORMATION 01 Project Name Single Fam Detached 02 Calculation Description Title 24 Analysis 03 Project Location 53-225 Avenida Herrera 04 City La Quinla 06 Standards Version Compliance 2017 06 Zip Code 92253 07 Compliance Manager Version BEMCmpMgr 2016.3,1 (1149) 08 Climate Zone CZ15 09 Software Version Energy Pro 7.2 10 Building Type Single Family 11 Front Orientation (deg/Cardinal) 270 12 Project Scope Addition and/or Alteration 13 Number of Dwelling Units 1 14 Total Cond. Floor Area (ft) 1506 15 Number of Zones 2 16 Slab Area (ft) 1506 17 Number of Stories 1 18 Addition Cond. Floor Area (ftz) 294 19 Natural Gas Available Yes 20 Addition Slab Area (ftz) 294 21 Glazing Percentage (%) 15.2 COMPLIANCE RESULTS 01 Building Compiles with Computer Performance 02 This building DOES NOT require HERS Verification 03 This building Incorporates one or more Special Features shown below ENERGY USE SUMMARY 04 06 06 07 08 Energy Use (kTDVlft2-yr) Standard Design Proposed Design Compliance Margin Percent Improvement Space Heating 12.10 13.82 -1.72 -14.2 Space Cooling 30073 299.81 0.92 0 3 IAQ Ventilation 0.00 0.00 0.00 0.0 Water Heating 826 7.13 1.13 13.7 Photovoltaic Offset •••• 0.00 0.00 Compliance Energy Energy Total 321.09 320.76 0.33 0.1 REQUIRED SPECIAL FEATURES The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis. • Window overhangs and/or fins Registration Number: Registration Date/Time: CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-06232018-1149 HERS Provider: Report Generated at: 2019-05-08 10:24:54 CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD Project Name: Single Fam Detached Calculation Date/Time: 10:24. Wed, May 08, 2019 Calculation Description: Title 24 Analysis Input File Name: Coogan Exist Addition. ribd 1 6x C F 1 R-PR F-01 Page 2 of 7 HERS FEATURE SUMMARY The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is provided in the building components tables below. Building -level Verifications: -None-- Cooling System Verifications: - None -- HVAC Distribution System Verifications: - None •• Domestic Hot Water System Verifications: None -- BUILDING - FEATURES INFORMATION 01 02 03 04 06 06 07 Project Name Conditioned Floor Area (ft2) Number of Dwelling Units Number of Bedrooms Number of Zones Number of Ventilation Cooling Systems Number of Water Heating Systems Single Fam Detached 1506 1 3 2 0 1 ZONE INFORMATION 01 02 03 04 06 06 07 Zone Name Zone Type HVAC System Name Zone Floor Area (ft2) Avg, Ceiling Height Water Heating System 1 Water Heating System 2 Existing Living Conditioned Living Zonal 1212 9 DHW Sys 1 n/a Addition Living Conditioned Living Zonal 294 9 DHW Sys 1 n/a Registration Number: Registration Date/Time: CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-06232018-1149 HERS Provider: Report Generated at: 2019-05-06 10:24*54 CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD Project Name: Single Fam Detached Calculation Date/Time: 10:24, Wed, May 08. 2019 Calculation Description: Title 24 Analysis Input File Name: Coogan Exist Addition. ribd16x CF1R-PRF-01 Page 3 of 7 OPAQUE SURFACES 01 02 03 04 05 O6 07 OB 09 10 11 Name Zone Construction Azimuth Orientation Gross Area (ft2) Window & Door Area (ft') Tilt (deg) Wall Exception Status Verified Existing Condition Front Wall Existing Living Default Wall 1978 to 1991 270 Front 800 106,7 90 n/a Existing No Leff Wall Existing Living Default Wall 197E to 1991 0 Left 600 0 90 n/a Existing No Rear Wall Existing Living Default Wall 1978 to 1991 90 Back 600 320028 90 1 nla Existing No Right Wall Existing Living Default Wall 1978 to 1991 180 Right 500 0 90 n/a Existing No Interior Surface Existing Living, -Addition Living Default Wall 1978 to 19911 1 0 n/a Existing No Roof Existing Living Default Roof 1978 to Pres 1212 n/a Existing No Front Wall 2 Addition Living R-15 Wall 270 Front 126 18 90 none New n/a Left Wall 2 Addition Living R-15 Wall 0 Left 208 72 90 none New n/a Rear Wall 2 Addition Living R-15 Wall 90 Back 126 0 90 none New n/a Right Wall 2 Addition Living R-15 Wall 180 Right 1 0 90 none New n/a Roof 2 Addition Living R-38 Roof Attic 294 n/a New n/a ATTIC 01 02 03 04 05 06 07 08 09 10 Name Construction Type Roof Rise Roof Reflectance Roof Emittance Radiant Barrier Cool Roof Status Verified Existing Condition Attic Existing Living Attic RoofExisting Living Ventilated 0 0.1 0.85 No No Existing No Attic Addition Living Attic RoofAddition Living Ventilated 0 0.1 085 Yes No New No Registration Number: Registration Date/Time: CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-06232018-1149 HERS Provider: Report Generated at: 2019-05-08 10:24:54 CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD Project Name: Single Fam Detached Calculation Date/Time: 10:24. Wed, May 08. 2019 Calculation Description: Title 24 Analysis Input File Name: Coogan Exist Addition.ribdl6x CF1R-PRF-01 Page 4 of 7 FENESTRATION I GLAZING 01 02 03 04 05 06 07 08 09 10 11 Name Surface (Orlentation-Azimuth) Width (ft) Height (ft) Multiplier Area (ft2) U-factor SHGC Exterior Shading Status Verified Existing Condition Window Front Wall (Front-270) 10.0 6.8 0.981 66.7 0.71 0.73 Insect Screen (default) Existing No Window 2 Front Wall (Front-270) 5.0 4.0 1 20.0 0.71 073 Insect Screen (default) Existing No Window 3 Front Wall (Front-270) 30 6.8 0.98 20.0 0.40 026 Insect Screen (default) New n/a Window 4 Rear Wall (Back-90) 80 30 1 24 0 0.71 073 Insect Screen (default) Existing No Window 5 Rear Wall (Back-90) 6.0 1.3 1.026 80 0.40 0.26 Insect Screen (default) New n/a Window 6 Front Wall 2 (Front-270) 4.0 4.5 1 18.0 0.40 026 Insect Screen (default) New n/a Window 7 Left Wall 2 (Left-0) 4.0 4.5 1 1 18.0 0.40 0.26 Insect Screen (default) New n/a Window 8 Left Wall 2 (Left-0) 8.0 4.5 1 36.0 0.40 0.26 Insect Screen (default) New n/a Window 9 Left Wall 2 (Left-0) 4.0 45 1 18.0 040 J 0,26 Insect Screen (default) New n/a OVERHANGS AND FINS 01 02 03 04 05 06 07 08 o9 10 11 12 13 14 Overhang Left Fin Right Fin Window Depth Dist Up Left Extent Right Extent Flap Hit. Depth Top Up Dist L Bot Up Depth Top Up Olst R Bot Up Window 2 0.1 2 2 0 0 0 0 0 0 0 0 0 Window 2 2 0.1 2 2 0 0 0 0 0 0 0 0 0 Window 3 2 01 2 2 0 0 0 0 0 0 0 0 0 Window 2 0.1 2 2 0 0 0 0 0 0 0 0 0 Window 5 2 0.1 2 2 0 0 0 0 1 0 0 0 0 0 Wndow6 2 0.1 2 2 0 0 0 0 0 0 0 0 0 Wndow7 2 0.1 2 2 0 0 0 0 0 0 0 0 0 Window 8 2 0.1 2 2 0 0 0 0 0 0 0 0 0 Window 2 0.1 2 2 0 0 0 0 0 0 0 0 0 Registration Number: Registration Datelfime: CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-06232018-1149 HERS Provider: Report Generated at: 2019-05-08 10:24:54 CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD CF1R-PRF-01 Project Name: Single Fam Detached Calculation Date/Time: 10:24, Wed, May OB, 2019 Page 5 of 7 Calculation Description: Title 24 Analysis Input File Name: Coogan Exist Addition.ribd16x OPAQUE SURFACE CONSTRUCTIONS 01 02 03 04 05 06 07 Total Cavity Winter Design Construction Name Surface Type Construction Type Framing R-value U-factor Assembly Layers • Cavity/Frame: no insul. /2x4 Top Chrd 2x4 Top Chord of Roof Truss 24 Roof Deck.: Wood Siding/sheathing/decking Attic RoofExisling Living Attic Roofs Wood Framed Ceiling in, OX, none 0 644 Roofing: Light Roof (Asphalt Shingle) • Inside Finish: Gypsum Board • Cavity/Frame: R-11 /2x4 Default Wall 1978 to 1991 Exterior Walls Wood Framed Wall 2x4 @ 16 in. 0 C R 11 0.110 Exterior Finish: 3 Coat Stucco • Inside Finish: Gypsum Board Ceilings (below Cavity/Frame: R-9 1 /2x4 Default Roof 1978 to Pres attic) Wood Framed Ceiling 2x4 @ 16 in. O.C. R 19 0.049 Over Ceiling Joists: R-9 9 insul • Inside Finish: Gypsum Board • Cavity/Frame: R-11 /2x4 Default Wall 1978 to 19911 Interior Walls Wood Framed Wall 2x4 @ 16 in. O.C. R 11 0 099 Other Side Finish: Gypsum Board • Cavity/Frame: no insul /2x4 Top Chrd 2x4 Top Chord of Roof Truss @ 24 Roof Deck: Wood Siding/sheathing/decking Attic RoofAddition Living Attic Roofs Wood Framed Ceiling in. O.C. none 0.644 Roofing: Light Roof (Asphalt Shingle) • Inside Finish: Gypsum Board Cavity/Frame: R-15/2x4 R-15 Wall Exterior Walls Woad Framed Wall 2x4 @ 16 in. O.C. R 15 0.095 Exterior Finish: 3 Coal Stucco • Inside Finish: Gypsum Board Ceilings (below Cavity/Frame: R-292/2x12 R-38 Roof Attic attic) Wood Framed Ceiling 2x12 @ 16 in. O.C. R 38 0 027 Over Ceiling Joists: R-B 8 insul SLAB FLOORS 01 02 03 1 04 05 06 07 08 09 Verified Perimeter Carpeted Existing Name Zone Area (ft) (R) Edge Insul. R-value Fraction Heated Status Condition Slab -on -Grade Existing Living 1212 858 None 1 No Existing No Slab -on -Grade 2 Addition Living 294 158 None 1 No New No BUILDING ENVELOPE - HERS VERIFICATION 01 02 03 04 Quality Insulation Installation (QII) Quality Installation of Spray Foam Insulation Building Envelope Air Leakage CFM60 Not Required Not Required Not Required nia Registration Number: Registration Dateltime: HERS Provider: CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-06232018-1149 Report Generated at: 2019-05-08 10:24:54 CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD CF1R-PRF-01 Project Name: Single Fam Detached Calculation Date/Time: 10:24, Wed, May 08, 2019 Page 6 of 7 Calculation Description: Title 24 Analysis Input File Name: Coogan Exist Addition.ribdl6x WATER HEATING SYSTEMS 01 02 03 04 05 06 07 08 Name System Type Distribution Type Water Heater Number of Heaters Solar Fraction (%) Status Verified Existing Condition DHW Sys 1 DHW Standard DHW Heater 1 1 0 Altered No WATER HEATERS 01 02 03 04 05 06 07 08 09 10 11 12 Name Heater Element Type Tank Type Number of Units Tank Volume (gal) Uniform Energy Factor / Energy Factor / Efficiency Input Rating I Pilot I Thermal Efficiency Tank Insulation R-value (Int/Ext) Standby Loss / Recovery Eff First Hour Rating I Flow Rate NEEA Heat Pump Brand I Model Tank Location or Ambient Condition DHW Heater 1 Gas Small Instantaneous 1 0 100000 R95 EF <= 200 kBtu/hr 0 n/a n/a n/a n/a SPACE CONDITIONING SYSTEMS 01 02 03 04 05 06 07 08 SC Sys Name System Type Heating Unit Name Cooling Unit Name Fan Name Distribution Name Status Verified Existing Condition Living Zonel Other Heating and Cooling System Healing Component 1 Cooling Component 1 HVAC Fan 1 Air Distribution System 1 Existing No HVAC - DISTRIBUTION SYSTEMS 01 02 03 04 05 06 07 08 09 10 Name Type Duct Leakage Insulation R-value Supply Duct Location Return Duct Location Bypass Duct Status Verified Existing Condition HERS Verification Air Distribution System 1 Ducts located in attic (Ventilated and Unventilated) Existing (not specified) 2.1 Attic Attic None Existing No n/a IAQ (Indoor Air Quality) FANS 01 02 03 04 05 06 Dwelling Unit IAQ CFM IAQ Watts/CFM IAQ Fan Type IAQ Recovery Effectiveness(%) HERS Verification SFam IAQVentRpl 0 0.25 Default 0 Not Required Registration Number: Registration Dale/Time: HERS Provider: CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-0623201 B-1149 Report Generated at: 2019-05-06 10*24:54 CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD CF1R-PRF-01 Project Name: Single Fam Detached Calculation Daterrime: 10:24, Wed, May 08, 2019 Page 7 of 7 Calculation Description: Title 24 Analysis Input File Name: Coogan Exist Addition.ribdl6x DOCUMENTATION AUTHOR'S DECLARATION STATEMENT 1. 1 certify that this Certificate of Compliance documentation is accurate and complete. Documentation Author Name: D rn tatirm Aulhor Signature: Joan Hacker zul� ' �71/a. Company: lVgnature Date: Insu-form, Inc. 5/8/2019 Address: CEA/HERS Certification Identification (If applicable): 43585 Monterey Avenue, Suite 7 Cily/statei�:m Desert, Ca 92260 Phone: 760-345-1352 RESPONSIBLE PERSON'S DECLARATION STATEMENT I certify the following under penally of perjury, under the laws of the State of California: 1. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance. 2. 1 certify that the energy features and performance specifications identified on this Certificate of COmpliance conform to the re upments of Title 24, Part 1 and P7hLorms Code of Regulations.3 The building design features or system design features identified on this Certificate of ComWianca sre mnaistant , ormallonprptidad on o1h ppllcabla ocumenls, worksheets, calculations, plans and specifications submitted to the enforcement agency for approval wtltl this b o e it applicatbn. Responsible Designer Name: Responsible 0 SI aturor. A. P. Lench II Company: Lench Design Studio, Inc. Date Sdg • Address: P.O. Box 450 Lic se: City/Stale+71D: La Quinta, Ca 92253 Phone: Registration Number: Registration Daterrime: HERS Provider: CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-06232018-1149 Report Generated at: 2019-05-08 10:24:54 RESIDENTIAL MEASURES SUMMARY RMS-1 Project Name Coogan Residence Project Address 53-225 Avenida Herrera La Quinta Building Type 10 Single Family ❑ Addition Alone ❑ Multi Family 10 Existing+ Addition/Alteration yDae 8/2019 California Energy Climate Zone Total Cond. Floor Area CA Climate Zone 15 1,506 Addition# 294 of Units 1 INSULATION Construction Type Area Cavity ftz S ecial Features Status Wall Wood Framed R 11 693 Existing Wall Wood Framed R 11 600 Existing Wall Wood Framed R 11 768 Existing Roof Wood Framed Attic R 19 1,212 Existing Wall Wood Framed R 11 500 Existing Demising Wood Framed R 11 1 Existing Slab Unheated Slab -on -Grade - no insulation 1,212 Perim = 858' Existing Wall Wood Framed R 15 371 New FENESTRATION I Totat Area: 229 Glazing Percentage: 15.2% 1 New/Altered Average U-Factor; 0.40 Orientation Area ftz U-Fac SHGC Overhang Sidefins Exterior Shades Status Front 86.7 0.710 0.73 2.0 none Bug Screen Existing Front (W) 38.0 0.400 0.26 2.0 none Bug Screen New Rear (E) 24.0 0.710 Rear (E) 8.0 0.400 0.73 2.0 none Bug Screen 0.26 2.0 none Bug Screen Existing New Left (N) 720 0.400 0.26 2.0 none Bug Screen New HVAC SYSTEMS Qty. Heating Min. Eff Cooling Min. Eff Thermostat Status 1 Central Furnace 78% AFUE Split Air Conditioner 12.0 SEER Setback Existing HVAC DISTRIBUTION Location Heating Duct Cooling Duct Location R-Value Status Living Zone Ducted Ducted Attic 2.1 Existing WATER HEATING Qty. Type Gallons Min. Eff Distribution Status 1 Small Instantaneous Gas 0 0.95 Standard Altered EnerpvPro 7.2 by EneravSoft User Number.- 2655 ID: Page 10 of 16 RESIDENTIAL MEASURES SUMMARY RMS-1 Project Name Coogan Residence Project Address 53-225 Avenida Herrera La Quinta Building Type m Single Family ❑ Addition Alone ❑ Multi Family m Existing+ Addition/Alteration Date 51812019 California Energy Climate Zone CA Climate Zone 15 Tota l Cond. Floor Area 1,506 Addition 294 # of Units 1 INSULATION Construction Type Area Cavity (fe) Special Features Status Roof Wood Framed Attic R 38 294 New Slab Unheated Slab -on -Grade no insulation 294 Perim = 158' New FENESTRATION I Total Area: 229 Glazing Percentage: 15.2% New/Altered Average U-Factor: Orientation Area ft2U-Fac SHGC Overhang Sidefins Exterior Shades 0.40 Status HVAC SYSTEMS Qty. Heating Min. Eff Cooling Min. Eff Thermostat Status HVAC DISTRIBUTION Location Heating Duct Cooling Duct Location R-Value Status WATER HEATING Qty. Type Gallons Min. Eff Distribution Status Enera Pro 7.2 by EnergySoft User Number: 2655 ID: Pa a 11 of 16 2016 Low -Rise Residential Mandatory Measures Summary NOTE: Low-rise residential buildings subject to the Energy Standards must comply with all applicable mandatory measures, regardless of the compliance approach used. Review the respective section for more information. "Exceptions may apply. Building Envelope Measures: § 110.6(a)l: Air Leakage. Manufactured fenestration, exterior doors, and exterior pet doors must limit air leakage to 0.3 cfm/ftz or less when tested per NFRC-400 or ASTM E283 or AAMA/WDMA/CSA 101/I5.21A440.2011: § 110.6(a)5: Labeling. Fenestration products must have a label meeting the requirements of § 10-111(a),. § 110.6(b): Field fabricated exterior doors and fenestration products must use U-factors and solar heat gain coefficient (SHGC) values from TABLES 110.E-A and 110.E-13 for compliance and must be caulked and/or weatherstsi § 110.7: Air Leakage. Alljoints, penetrations, and other openings in the building envelope that are potential sources of air leakage must be caulked. asketed, or weather stri ed. § 110.8(a): Insulation Certification by Manufacturers. Insulation specified or installed must meet Standards for Insulating Material. § 110.8(g): Insulation Requirements for Heated Slab Floors. Heated slab floors must be insulated per the requirements of § I10.8(g). § 110.8(i): Roofing Products Solar Reflectance and Thermal Emittance, The thermal emittance and aged solar reflectance values of the roofing material must meet the requirements of 5 110,8(1) when the installation of a cool roof is specified on the CF1 R. § 110.8ft Radiant Barrier. A radiant barrier must have an emittance of 0.05 or less and be certified to the Department of Consumer Affairs. Ceiling and Rafter Roof Insulation, Minimum R-22 insulation in wood -frame ceiling; or the weighted average U-factor must not exceed 0,043. Minimum R-19 or weighted average U-factor of 0.054 or less in a rafter roof alteration, Attic access doors must have permanently attached § 150.0(a): insulation using adhesive or mechanical fasteners. The attic access must be gasketed to prevent air leakage. Insulation must be installed in direct contact with a continuous roof or ceiling which is sealed to limit infiltration and exfiltration as specified in § 1103, including but no0imited to Nading insulation either above or below the roof deck or on top,of a drywall. cellirl : § 150.0(b): Loose -fill Insulation. Loose fill insulation must meet the manufacturer's required density for the labeled R-value. Above Grade Wall Insulation, Minimum R-13 insulation in 2x4 inch wood framing wall or have a U-factor of 0.102 or less (R-19 in 2x6 or U- § 150.0(c): factor of 0.074 or less). Opaque non -framed assemblies must have an overall assembly U-factor not exceeding 0.102, equivalent to an installed value of R-13 in a WOW framed assembly.* § 150.0(d); Raised -floor Insulation. Minimum R-19 insulation in raised wood framed floor or 0.037 maximum U-factor.' § 150.0(f): Slab Edge Insulation. Slab edge insulation must meet all of the following: have a water absorption rate, for the insulation material alone without facings, no greater than 0.3%; have a water vapor permeance no greater than 2.0 perm/inch; be protected from physical damage and UV light deterioration; and, when installed as part of a heated slab floor, meet the requirements of § 11 0.8. Vapor Retarder. In Climate Zones 1-16, the earth floor of unvented crawl space must be covered with a Class 1 or Class II vapor retarder. This § 150.0(g)l: requirement also appliesio controlled ventilation crawl spacefor buildings tomI in with the exception toi 150.0 d . Vapor Retarder, In Climate Zones 14 and 16, a Class I or Class 11 vapor retarder must be installed on the conditioned space side of all § 150.0(g)2: insulation in all exterior walls, vented attics, and unvented attics with air - permeable insulation. Fenestration Products. Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors must have a § 150,0(q): maximum U-factor of 0.58; or the weiahied average U-factor of all fenestration must not exceed 0.58.' Fireplaces, Decorative Gas Appliances, and Gas Log Measures: § 150.0(e)1A: Closable Doors. Masonry or factory -built fireplaces must have a closable metal or glass door covering the entire opening of the firebox. § 150.0(e)1 B; Combustion Intake. Masonry or factory -built fireplaces must have a combustion outside air intake, which is at least six square inches in area and is equipped with a readily accessible. operable. and lighi-lit(ing damper or combustion -air control device: § 150.0(e)1 C: Flue Damper, Masonry or factory -built fireplaces must have a flue damper with a readily accessible control,' § 150.0(e)2: Pilot Light. Continuous burning pilot lights and the use of indoor air for cooling a fireboxjacket, when that indoor air is vented to the outside of the building, are prohibited. Space Conditioning, Water Heating, and Plumbing System Measures: § 110.0-§ 110.3: Certification. Heating, ventilation and air conditioning (HVAC) equipment, water heaters, showerheads, faucets, and all other regulated arjohances must be certified by the manufacturer to the Energy Commission.' § 110.2(a): HVAC Efficiency. Equipment must meet the applicable efficiency requirements in TABLE 110.2-A through TABLE 110.2-K: Controls for Heat Pumps with Supplementary Electric Resistance Heaters. Heal pumps with supplementary electric resistance heaters § 110.2(b): must have controls that prevent supplementary heater operation when the heating load can be met by the heat pump alone; and in which the cut -on temperature for Compression heating is higher than the cut -on temperature for supplementary heating, and the cut-off temperature for compression hugn is hl her than the cut-off tempefature for supplementary heating.' § 110.2(c): Thermostats. All unitary heating or cooling systems not controlled by a central energy management control system (EMCS) must have a setback thermostat: Water Heating Recirculation Loops Serving Multiple Dwelling Units. Water heating recirculation loops serving multiple dwelling units must § 110.3(c)5: meet the air release valve, backflow prevention, pump priming, pump isolation valve, and recirculation loop connection requirements of § 110.3 c 5, § 110.3(c)7: Isolation Valves. Instantaneous water heaters with an input rating greater than 6.8 kBTU/hr (2 kW) must have isolation valves with hose bibbs or other fillips on both cold water and hot water lines of water heating systems to allow for water lank flushing when the valves are closed, § 110.5: Pilot Lights. Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces; household cooking appliances (appli- ances without an electrical supply voltage connection with pilot lights that consume less than 150 Bttrlhr are exempt),• and pool ands heaters: Building Cooling and Heating Loads. Heating and/or cooling loads are calculated in accordance with ASHRAE Handbook, Equipment § 150.0(h)1: Volume, Applications Volume, and Fundamentals Volume; SMACNA Residential Comfort System Installation Standards Manual; or ACCA Manual J using design conditions specified in § 150.0(h)2. ,a 2016 Low -Rise Residential Mandatory Measures Summary § 150.0(h)3A: Clearances. Installed air conditioner and heat pump outdoor condensing units must have a clearance of at least 5 feet from the outlet of any dryer vent. § 150.0(h)3B: Liquid Line Drier. Installed air conditioner and heat pump systems must be equipped with liquid line filter driers if required, as specified by manufacturer's instructions. § 150.00)1: Storage Tank Insulation. Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water -heating systems, must have R-12 external insulation or R-16 internal insulation where the internal insulation R-value is indicated on the exterior of the tank. Water piping and cooling system line insulation. For domestic hot water system piping, whether buried or unburied, all of the following must be insulated according to the requirements of TABLE 120.3-A: the first 5 feet of hot and cold water pipes from the storage tank; all piping with a § 150.06)2A: nominal diameter of 314 inch or larger; all piping associated with a domestic hot water recirculation system regardless of the pipe diameter; piping from the heating source to storage tank or between tanks; piping buried below grade; and all hot water pipes from the heating source to kitchen fixtures.' Water piping and cooling system line insulation. All domestic hot water pipes that are buried below grade must be installed in a water proof § 150.00)2B: and non -crushable casing or sleeve.' J Water piping and cooling system line insulation. Pipe for cooling system lines must be insulated as specified in § 150.00)2A. Distribution § 150.0(j)2C; piping for steam and h dronic heatin_q systems or hot waters stems must meet the requirements in TABLE 120.3-A.' § 150.O0)3: Insulation Protection. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Insulation Protection. Insulation exposed to weather must be installed with a cover suitable for outdoor service. For example, protected by § 150.00)3A: aluminum, sheet metal, painted canvas, or plastic cover. The cover must be water retardant and provide shielding from solar radiation that can cause degradation of the material. Insulation Protection. Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space must have a § 150.00)3B: Class I or Class II vapor retarder. Gas or Propane Systems. Systems using gas or propane water heaters to serve individual dwelling units must include all of the following: a 120V electrical receptacle within 3 feet of the water heater; a Category III or IV vent, or a Type B vent with straight pipe between the outside § 150,0(n)l: termination and the space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the water heater, and allows natural draining without pymp assislance; and a gas supply line with a capacity of at least 200,000 Rlulhr. § 150.0(n)2: Recirculating Loops. Recirculating loops serving multiple dwelling units must meet the requirements of § 110,3(c)5. Solar Water -heating Systems. Solar water -heating systems and collectors must be certified and rated by the Solar Rating and Certification § 150.0(n)3: Corporation SRC@ or by a listing agency that is approved.by the Executive Director, Ducts and Fans Measures: Ducts. Insulation installed on an existing space -conditioning duct must comply with § 604.0 of the California Mechanical Code (CMC). If a § 110.8(d)3: contractor installs the insulation, the contractor must certify to the customer, in writinq, that the insulation meets this re. uirement. CMC Compliance. All air -distribution system ducts and plenums must be installed, sealed, and insulated to meet the requirements of CMC §§ 601.0, 602.0, 603.0, 604.0, 605.0 and ANSIISMACNA-006-2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition. Portions of supply -air and return -air ducts and plenums must be insulated to a minimum installed level of R-6.0 (or higher if required by CMC § 605.0) or a minimum installed level of R-4.2 when entirely in conditioned space as confirmed through field verification and diagnostic testing (RA3.1.4.3.8), Connections of metal ducts and inner core of flexible ducts must be mechanically fastened. Openings must be sealed with § 150.0(m)l: mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181 B or aerosol sealant that imeets the requirements of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh or tape must be used. Building cavities, support platforms for air handlers, and plenums designed or constructed with materials other than sealed sheet metal, duct board or flexible duct must not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms must not be compressed to cause reductions in the Gross -sectional area of the ducts.' Factory -Fabricated Duct Systems. Factory -fabricated duct systems must comply with applicable requirements for duct construction, § 150.0(m)2: connections, and closures; joints and seams of duct systems and their components must not be sealed with cloth back rubber adhesive duct tapes unless such tape is used in combination with mastic and draw bands. § 150.0(m)3: Field -Fabricated Duct Systems. Field -fabricated duct systems must comply with applicable requirements for: pressure -sensitive tapes, mastics, sealants, and other requirements §2eciried for duct construction.. Backdraft Dampers. All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or § 150.0(m)7: automatic dampers. Gravity Ventilation Dampers. Gravity ventilating systems serving conditioned space must have either automatic or readily accessible, § 150.0(m)8: manually operated dam ers in all o enin s to the outside, except combustion inlet and outlet air openings and elevator shaft vents. Protection of Insulation. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Insulation exposed to weather must be suitable for outdoor service. For example, protected by aluminum, sheet metal, painted canvas, or § 150.0(m)9: plastic cover. Cellular foam insulation must be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation. § 150,0(m)10: Porous Inner Core Flex Duct. Porous inner core flex duct must have a non -porous layer between the inner core and outer vapor barrier. Duct System Sealing and Leakage Test. When space conditioning systems use forced air duct systems to supply conditioned air to an § 150,0(m)11: occupiable space, the ducts must be sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in accordance with 5 1 50.0m 11 and Reference Residential endfx RA3. Air Filtration, Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal § 150.0(m)l 2: conditioning component, except evaporative coolers, must be provided with air filter devices that meet the design, installation, efficiency, pressure drop, and labeling requirements of § 150.0 m 12. 3 1 2016 Low -Rise Residential Mandatory Measures Summary Duct System Sizing and Air Filter Grille Sizing. Space conditioning systems that use forced air ducts to supply cooling to an occupiable space must have a hole for the placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPP) in the § 150.0(m)13: supply plenum. The space conditioning system must also demonstrate airflow z 350 CFM per ton of nominal cooling capacity through the return grilles, and an air -handling unit fan efficacy :5 0.58 WICFM as confirmed by field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3.3. This applies to both single zone central forced air systems and every zone for zonally controlled central forced airs terns.' Ventilation for Indoor Air Quality. All dwelling units must meet the requirements of ASHRAE Standard 62.2. Neither window operation nor §150.0(o): continuous operation of central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of rovidin whole -building ventilation. § 150,0(o)1A: Field Verification and Diagnostic Testing. Whole -building ventilation airflow must be confirmed through field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3.7. Pool and Spa Systems and Equipment Measures: Certification by Manufacturers. Any pool or spa heating system or equipment must be certified to have all of the following: a thermal efficiency § 110.4 (a) that complies with the Appliance Efficiency Regulations; an on -off switch mounted outside of the heater that allows shutting off the heater without adjusting the thermostat setting; a permanent weatherproof plate or card with operating instructions; and must not use electric resistance heating.' § 110.4(b)1: Piping. Any pool or spa heating equipment must be installed with at least 36 inches of pipe between the filter and the heater, or dedicated suction and return lines, or built-in or built-up connections to allow for future solar heating. § 110.4(b)2: Covers. Outdoor pools or spas that have a heat pump or gas heater must have a cover. § 110.4(b)3: Directional inlets and time switches for pools. Pools must have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or programmed to run only during off-peak electric demand periods. § 110.5: Pilot Light. Natural gas pool and spa heaters must not have a continuously burning pilot light, Pool Systems and Equipment Installation. Residential pool systems or equipment must meet the specified requirements for pump sizing, flow § 150.0 (p)' rate, i in , filters and valves.' Lighting Measures: Lighting Controls and Components. All lighting control devices and systems, ballasts, and luminaires must meet the applicable requirements § 110.9: of § 110.9.' JAB High Efficacy Light Sources. To qualify as a JAB high efficacy light source for compliance with § 150.0(k), a residential light source must § 110.9(e): be certified to the Energy Commission according to Reference Joint Appendix JAB. § 150.0(k)1 A: Luminaire Efficacy. All installed luminaires must be high efficacy in accordance with TABLE 150.0-A. Blank Electrical Boxes. The number of electrical boxes that are more than 5 feet above the finished floor and do not contain a luminaire or § 150.0(k)1 B: other device must be no greater than the number of bedrooms. These electrical boxes must be served by a dimmer, vacancy sensor control, or fan speed control. Recessed Downlight Luminaires in Ceilings. Luminaires recessed into ceilings must meet all of the requirements for: insulation contact (IC) § 150.0(k)1 C: labeling; air leakage; sealing; maintenance; and socket and light source as described in § 150.0(k)1 C. A JA8-2016-E light source rated for elevated temperature must be installed by final inspection in all recessed downli ht luminaires in ceilings, § 150.0(k)l D: Electronic Ballasts. Ballasts for fluorescent lamps rated 13 watts or greater must be electronic and must have an output frequency no less than 20 kHz. Night Lights. Permanently installed night lights and night lights integral to installed luminaires or exhaust fans must be rated to consume no § 150.0(k)1 E: more than 5 watts of power per luminaire or exhaust fan as determined in accordance with § 130.0(c). Night lights do not need to be controlled by vacancy sensors. Lighting Integral to Exhaust Fans. Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods) § 150.0(k)1 Ft must meet the applicable requirements of § 150.0(k .' Screw based luminaires. Screw based luminaires must not be recessed downlight luminaires in ceilings and must contain lamps that comply § 150.0(k)1 G: with Reference Joint Appendix JA8. Installed lamps must be marked with "JA8-2016" or "JA8-2016-E" as specified in Reference Joint Appendix JA8' § 150.0(k)1 H: Enclosed Luminaires. Light sources installed in enclosed luminaires must be JAB compliant and must be marked with "JA8-2016-E." § 150.0(k)2A: Interior Switches and Controls. All forward phase cut dimmers used with LED light sources must comply with NEMA SSL 7A, § 150.0(k)2B: Interior Switches and Controls. Exhaust fans must be switched separately from lighting systems.' § 150.0(k)2C: Interior Switches and Controls. Luminaires must be switched with readily accessible controls that permit the luminaires to be manually switched ON and OFF, § 150.0(k)2D: Interior Switches and Controls. Controls and equlpmertt must be installed in accordance with manufacturer's instructions. § 150.0(k)2E: Interior Switches and Controls. No control must bypass a dimmer or vacancy sensor funclion if the control is installed to comply with § 150.0 k , § 150,0(k)2F: Interior Switches and Controls. Lighting controls must comply with the applicable requirements of § 110.9. Interior Switches and Controls. An energy management control system (FMCS) may be used to comply with dimmer requirements if it: § 150.0(k)2G: functions as a dimmer according to § 110.9; meets the Installation Certificate requirements of § 130.4; meets the EMCS requirements of § 130.5 ; and meets all other requirements in § 150.0(k)2. Interior Switches and Controls. An EMCS may be used to comply with vacancy sensor requirements in § 150,0(k) if it meets all of the § 150.0(k)21-1: following: it functions as a vacancy sensor according to § 110.9; the Installation Certificate requirements of § 130.4; the EMCS requirements of § 130.5 ; and all other requirements in § 1 50.0k 2. § 150.0(k)21: Interior Switches and Controls. A multiscene programmable controller may be used to comply with dimmer requirements in § 150.0(k) if it provides the functionality of a dimmer according to § 110.9, and complies with all other applicable requirements in § 150.0(k)2. 2016 Low -Rise Residential Mandatory Measures Summary § 150.0(k)2J: Interior Switches and Controls. In bathrooms, garages, laundry rooms, and utility rooms, at least one luminaire in each of these spaces must be controlled by a vacancy sensor. § 150.0(k)2K: Interior Switches and Controls. Dimmers or vacancy sensors must control all luminaires required to have light sources compliant with Reference Joint Appendix JAB. except luminaires in closets less than 70 square feet and luminaires in hallways: § 150.0(k)2L: Interior Switches and Controls. Undercabinet lighting must be switched separately from other lighting systems. Residential Outdoor Lighting. For single-family residential buildings, outdoor lighting permanently mounted to a residential buildling, or to other § 150.0(k)3A: buildings on the same lot, must meet the requirement in item § 150.0(k)3Ai (ON and OFF switch) and the requirements in either item § 150.0(k)3Aii (photocell and motion sensor) or item § 150.0(k)3M (photo control and automatic time switch control, astronomical time clock, or EM Residential Outdoor Lighting. For low-rise multifamily residential buildings, outdoor lighting for private patios, entrances, balconies, § 150.0(k)3B: and porches; and outdoor lighting for residential parking lots and residential carports with less than eight vehicles per site must comply with either § 150.0 3A or with the applicable requirementslin §§ 110.9,130.0.130.2,130.4, 140.7 and 141.0. § 150.0(k)3C: Residential Outdoor Lighting, For low-rise residential buildings with four or more dwelling units, outdoor lighting not regulated by 150,0(k)39 or § 150.0 k 3'D mustcbmplV with the applicable requirements in §§ 110.9, 130.0,130.Z, 130.4, 140.7 and 141.0. § 150.0(k)3D: Residential Outdoor Lighting. Outdoor lighting for residential parking lots and residential carports with a total of eight or more vehicles per site must comply with the applicable requirements In §§ 110.9, 130.0, 130.2, 130.4. 140.7, and 141.0. Internally illuminated address signs. Internally illuminated address signs must comply with § 140.8; or must consume no more than 5 watts of § 150.0(k)4: power as determined according to § 130.0(c). Residential Garages for Eight or More Vehicles. Lighting for residential parking garages for eight or more vehicles must comply with the § 150.0(k)5: applicable requirements for nonresidential garages in §5 110.9,130.0,.130.1, 130.4, 140.6, and 141.0. Interior Common Areas of Low-rise Multi -Family Residential Buildings. In a low-rise multifamily residential building where the total interior § 150,0(k)6A: common area in a single building equals 20 percent or less of the floor area, permanently installed lighting for the interior common areas in that building must be high efficacy luminaires and controlled by an occupant sensor. Interior Common Areas of Low-rise Multi -Family Residential Buildings. In a low-rise multifamily residential building where the total interior common area in a single building equals more than 20 percent of the floor area, permanently installed lighting in that building must: § 150.0(k)6B: i. Comply with the applicable requirements in §§ 110.9, 130.0, 130.1, 140.6 and 141.0; and ii, Lighting installed in corridors and stairwells must be controlled by occupant sensors that reduce the lighting power in each space by at least 50 percent. The occupant sensors must be capable of turninq the li ht fully on and off from all designed paths of ingress and egress. Solar Ready Buildings: Single Family Residences. Single family residences located in subdivisions with ten or more single family residences and where the § I10.10(a)l: application for a tentative subdivision map for the residences has been deemed complete by the enforcement agency must comply with the requirements of § 110.10(b) through § 110,10 e . § 110.10(a)2: Low-rise Multi -family Buildings. Low-rise multi -family buildings must comply with the requirements of § I10.10(b) through § 110.10(d). Minimum Area. The solar zone must have a minimum total area as described below. The solar zone must comply with access, pathway, smoke ventilation, and spacing requirements as specified in Title 24, Part 9 or other Parts of Title 24 or in any requirements adopted by a local jurisdiction. The solar zone total area must be comprised of areas that have no dimension less than 5 feet and are no less than 80 square feet each for buildings with roof areas less than or equal to 10,000 square feet or no less than 160 square feet each for buildings with roof areas § 110.10(b)1: greater than 10,000 square feet. For single family residences the solar zone must be located on the roof or overhang of the building and have a total area no less than 250 square feet. For low-rise multi -family buildings the solar zone must be located on the roof or overhang of the building, or on the roof or overhang of another structure located within 250 feet of the building, or on covered parking installed with the building project, and have a total area no less than 15 percent of the total roof area of the building excluding any skylight area.- § 110.10(b)2: Orientation. All sections of the solar zone located on steep -sloped roofs must be oriented between 110 degrees and 270 degrees of true north. § 110.10(b)3A: Shading. The solar zone must not contain any obstructions, including but not limited to: vents, chimneys, architectural features, and roof mounted equipment.* Shading. Any obstruction located on the roof or any other part of the building that projects above a solar zone must be located at least twice the § 110,10(b)3B: distance, measured in the horizontal plane, of the height difference between the highest point of the obstruction and the horizontal projection of the nearestpoint of the solar zone, measured in the vertical lane' § 110.10(b)4: Structural Design Loads on Construction Documents. For areas of the roof designated as solar zone, the structural design loads for roof dead load and roof live load must be clearly indicated on the construction documents. Interconnection Pathways. The construction documents must indicate: a location for inverters and metering equipment and a pathway for § 110.10(c): routing of conduit from the solar zone to the point of interconnection with the electrical service (for single family residences the point of interconnection will be the main service panel),, and a pathway for routing of plumbing from the solar zone to the water -heating system. § 110.10(d): Documentation. A copy of the construction documents or a comparable document indicating the information from § 110.10(b) through § 110.10(c) must be provided to the occupant, § 110.10(e)1: Main Electrical Service Panel. The main electrical service panel must have a minimum busbar rating of 200 amps. Main Electrical Service Panel. The main electrical service panel must have a reserved space to allow for the installation of a double pole circuit § 110.10(e)2: breaker for a future solar electric installation. The reserved space must be: positioned at the opposite (load) end from the input feeder location or main circuit location; and permanently marked as "For Future Solar Electric" HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name Coogan Residence System Name Living Zone ENGINEERING CHECKS SYSTEM LOAD Number of S stems 1 Heating System Output per 5 tem 80,000 Total Room Low Return Vented Lighth Return Air Duc Return F: Ventilab Supply F, Supply Air Duc TOTAL SYSTEM LO/ Total Output Btuh 80,000 ft Output Btuh/s 53.1 CoolingSystem Output per System 58,000 Total Output Stuh 58,000 Total Out ut Tons 4.8 Total Output ft u! Btuh/s 38.5 Total Output s ftfTon 311.6 Air System Date 5/8/2019 Floor loor Area 1,506 COIL COOLING PEAK COIL HTG. PEAK CFM Sensible Latent CFM Sensible Is 2,348 29,041 1,410 1,810 57.821 9 is n 0 3,758 6,168 0 0 ,n o 0 01 0 0 in is ,D 0 3,758 36,558 1,4101 0 6,168 70.157 CFM per System 2.2101 HVAC EQUIPMENT SELECTION Airflow cfm 2,210 Existing 34,848 19,997 Airflow cfmis ft 1.47 Airflow cfmITon 457.2 Outside Air °Io 0.0% Total Adjusted System Output 34,849 19,997 0.00 (Adjusted for Peak Design conditions) Outside Air {cfmfs ft Note: values above Riven at ARI conditions TIME OF SYSTEM PEAK Aug 3 PM HEATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26 OF 68 OF 68 OF 102 OF Outside Air 0 cfm Supply Fan Heating Coil 100, 2.210 cfm ROOM 68 OF COOLING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Coo 112/78OF 80/69°F 80/69°F 65/64°F Outside Air =_� 0 cfm Supply Fan Cooling Coil 2,210 cfm 80/69°F Pea 80,000 80,000 Jan 1 70 OF 66/64°F 61.3% ROOM 78/68°F