11-0405 (AR)P.O. BOX 1504
78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
Application Number: 11-00000.04.0.5
Property Address: 55632 OAK TREE
APN: 775 -231 -009 -
Application description: ADDITION - RESIDENTIAL,
Property Zoning: LOW DENSITY RESIDENTIAL
Application valuation: 35000
Tay/
"
BUILDING & SAFETY DEPARTMENT
BUILDING PERMIT
Architect or Engineer:
alo
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury at am licensed under provisions of Chapter 9 (commencing with
Section 7000) of Division 3 of the Bus, ess a dProfessionals Code, and my License is in full force and effect.
License Class: B License No.: 594043
ate: A ontract.r:
• OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjur that I am exempt from the Contractor's State License Law for the
following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or'she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).:
(_ 1 I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
Contractors' State License Law does not apply to an owner of property who builds or improves thereon,
and who does the work himself or herself through his or her, own employees, provided that the
improvements are not intended or offered for sale. If, however, the building or improvement is sold within
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
.improve for the purpose of sale.).
(_ 1 1, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
property who builds or improves thereon, and who contracts for the projects with a contractorls) licensed
pursuant to the Contractors' State License Law.).
1 _ 1 I am exempt under Sec. , B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name: A
Lender's Address: T
LQPERMIT
VOICE (760) 777-7012.
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Date: 7/21/11
Owner:
VERSHURE RICHARD & MAUREEN
11 HUNTER AVENUE U'
ARMONK, NY 10504 D lJ t
j 2 r, 2011
JUL
Contractor: F Cl�y{pTA
7CIS CONSTRUCTION & MAINT C{�1(Q�. �GP.
48236 VISTA DE NOPAL • f{Lyt!SC'L
LA QUINTA, CA 92253
(760)564-5811
Lic. No.: 594043
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
_ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided
for by Section 3700 of.the Labor Code, for the performance of the work for which this permit is
issued.
I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
Code, for the performance of the work for which this permit is issued. My workers' compensation
insurance carrier and policy number are:
Carrier STATE FUND Policy Number 0026211-2008
_ I certify that, in the AORKERS,
of the work for which this permit is issued, I shall not employ any
person in any mabecome subject to the workers' compensation laws of California,
and agree that, im sub* to the workers' compensation provisions of Section
3700 of the LabII f hw' comply with those provisions.
Date: ` tSECURE
nt:
WARNING: FAIL RE' C PENSATION COVERAGE IS UNLAWFUL, AND SHALL
SUBJECT AN EMPLOYER TO CALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose request and for
whose benefit work is performed under or pursuant to any permit issued as a result of this application,
the owner, and the applicant, each agrees to, and shall defend, indemnity and hold harmless the City
of La Ouinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit. ' '
2. Any permit issued as a result of this application becomes null and void if work is not commenced
within 180 days from date.of issuance of such permit, or cessation of work for 180 days will subject
permit to cancellation.
I certify at 1 have read this application and state that the ove i formation is correct. I agree to comply with all
city county ordinances a state laws relating to bull ng con ruction, and hereby authorize representatives
of �s 1ounty to enter up the above-mentioned prope for i p tion poses.
Date: �—!'+I ignature (Applicant or Agent):
Application Number . . . 11-00000405
LQPERMIT
Structure Information
Construction Type
TYPE V, UNPROTECTED
Occupancy Type . .
. . . DWELLG/LODGING/LONG <=10
Other struct info . .
. . . CODE EDITION 2010
-------------------------------------------------=-----------------
1ST FLOOR SQUARE FOOTAGE
51.00
---------
Permit . . .
BUILDING PERMIT
Additional desc .
Permit Fee . . . .
317.00 Plan Check Fee
206.05
Issue Date . . . .
Valuation
35000
Expiration Date
1/17/12
Qty Unit Charge
Per
Extension
BASE FEE
252.00
10.00 6.5000
-----------------------------------------------------------=----------------
THOU BLDG 25,001-50,000
65.00
Permit . . .
ELECT - ADD/ALT/REM
Additional desc . .
Permit Fee.
43.53 Plan Check. Fee
10.88
Issue Date . . . .
Valuation
0
Expiration Date
1%17/12
Qty Unit Charge
Per
Extension
BASE FEE
15.00
35.00 .0350
ELEC NEW RES - 1 OR 2 FAMILY
1.23
25.00 .7500
PER ELEC DEVICE/FIXTURE IST 20
18:75
19.00 .4500
----------------------------------------------------------------------------
EA ELEC DEVICE/FIXTURE >20
8.55
Permit . .
MECHANICAL"
Additional des& .
Permit Fee
24.00• Plan Check Fee
6.00
Issue Date
Valuation . . . .
0
Expiration Date
1/17/12
Qty Unit Charge
Per
Extension
BASE FEE
15.00
2.00 4.5000
--------------------------
EA. MECH-VENT INST/ DUCT ALT =
---------------------------------------
9.00
-----------
Permit . . .
PLUMBING
Additional desc .
'Permit Fee . . . .
27.00 Plan Check Fee
6.75
Issue Date . . . .
Valuation . . . .
0
Expiration Date
1/17/12
LQPERMIT
.C -
Application Number . . . . . 11-00000405
Permit . . . . . . PLUMBING
Qty Unit Charge Per
Extension
BASE FEE
15.00
1.00 6.0000 EA PLB FIXTURE
6.00
1.00 3..0000 EA PLB WATER INST/ALT/REP
3.00
1.00 3.0000 EA PLB FIXTURE DRAIN/VENT
REP/ALT
3.00
--------------------------------------------------------------------=-------
Special Notes and Comments
51 SF ADDITION & REMODEL TO KITCHEN.
PERMIT INCLUDES.LIGHTING, ELECTRICAL,
PLUMBING AND MECHANICAL. 2010 CODES.
-----------------------------------------------------------------------------
Other -Fees . . . . . . . . . BLDG STDS ADMIN (SB1473)
2.00
ENERGY REVIEW FEE
20.61
STRONG MOTION (SMI)
-RES
3.50
Fee summary Charged Paid Credited
------------------------------
Due
---------------------------
Permit Fee Total 411.53 .00
.00
411.53
Plan Check Total 229.68 .00
.00
229.68
Other Fee Total 26.11 .00
.00
26.11
Grand Total 667.32 .00
.00
667.32
LQPERMIT
r
Bin # P
City of La Quinta
Building 8r Safety Division
P.O. Box 1504, 78-495 Calle Tampico
La Qulnta, CA 92253 - (760) 777-7012
Building Permit Application and Tracking Sheet
Permit #(o)
O
Project Address: SS . Z MIFJB Owner's Name: 90
A. P. Number: 7 7 S• ?s3 I • Get - 4 Address: 2 A te- -rge
Legal Description: U01—r-17 /(4rTI5 City, ST, Zip:
G
Contractor:Telephone: �(� 2'ZS ��• � :>::�:;�.;�:.,�.;�:::;��
Address:t►m ��
Project Description:
City, ST, Zip:(,�y� �1 TGtt�.J
Telephone:
:: :�:'4'':•E;::.;'.:;•F:.F ��C4r!°s A C7.
State Lic. # : City Lic. #;
Arch., Engr., Designer:
Address: 4<-V °
City., ST, Zip: v��.. cl-z
Telephone: 7&b, S`18. . �Q'% ><:: •nJ''' > `r.s; ' '<: Construction Type: Occupancy:
State Lic. #: i3 {F:.?>33.'.c<><a k<'s a"E "s Project type (circle one) New Add'n Alter Repair Demo
Name of Contact Person: AC�/ Pti Sq. Ft.:rj/
# St ries:
#Units:
Telephone # of Contact Person: Estimated Value of Project:
APPLICANT: DO NOT WRITE BELOW THIS LINE
#
Submittal
Req'd
Recd TRACKING
PERMIT FEES
Plan Sets
Plan Check submitted
Item
Amount
Structural Calcs.
Reviewed, ready for orrecdo
Plan Check Deposit
Truss Cates.
Called Contact Person
$
Plan Check Balance.
Tide 24 Calcs.
Plans picked up
Construction
Flood plain plan
Plans resubmitted/0
Mechanical
Grading plan
2•" Review, ready fo corrections ssue
51^0
Electrical
Subcontactor List
Called Contact Person
Plumbing
Grant Deed
Plans picked up
d��
S.M.I.
H.O.A. Approval
Plans resubmitted
Grading
IN HOUSE:-
''" Review, ready fo correctlo Issue
Developer Impact Fee
Planning Approval
Called Contact Person I yt ice,
Z•
A.I.P.P.
Pub. Wks. Appr
Date of i99ae-irie$46
School FeesL
p
b
J
Total Permit Fees
. �2
ql zo -q OAS 444cZ s/. .
&/a N4&6"411 p &/jAIL7 ate- 4?// 6 JW c 6/�6
Z� 2- *cam•.► -f- t -�. cel • . tic .d `Y L41
�� Oft
Coachella Valley Unified. School District
.83-733 Avenue 55, Thermal, CA 92274
(760) 398-5909 — Fax (760) 398-1224
This Box For District Use Only
DEVELOPER FEES PAID
AREA:
AMOUNT
LEVELONEAMOUNT:
LEVELTWOAMOUNT:
MITIGATION AMOUNT:
COMM/IND. AMOUNT:
DATE:
RECEIPT:
CHECK #:
INITIALS:
CERTIFICATE OF COMPLIANCE
(California Education Code 17620)
Project Name:
Owner's Name: Richard & Maureen Vershure
Project Address: 55-632 Oak Tree, La Quinta, CA 92253
Project Description: Addition to Existing
Date: July 21, 2011
Phone No.
APN: 775 -231 -009 -----Tract #: Lot #'s:
Type of Development: Residential XX Commercial
Total Square Feet of Building Area: 51
Certification of Applicant/Owners: The person signing certifies thatn
C
penalty of perjury and further represents that he/she is authorized to sic
Dated: Signature:
Industrial
information is correct and makes this statement under
f of the owner/developer.
LD 10-1
SCHOOL DISTRICT'S REQUIREMENTS FOR THE ABOVE PROJECV HAVE BEEN OR WILL BE SATISFIED IN
ACCORDANCE WITH ONE OF THE FOLLOWING: (CIRCLE ONE)
Education Code Gov. Code Project Agreement Existing Not Subject to Fee
17620 65995 Approval Prior to 1/1/87 Requirement
Number of Sq.Ft. 51
Amount per Sq.Ft. 0.00
Amount Collected $0.00
Building Permit Application Completed: Yes/No
By: Jamie T. Brown, Asst. Supt., Business Services
Certificate issued by: Marcela Valdez, Construction Analyst Signature:
NOTICE OF 90 DAY PERIOD FOR PROTEST OF FEES AND STATEMENT OF FEES
Section 66020 of the Government Code asserted by Assembly Bill 3081, effective January 1, 1997, requires that this District provide (1) a wrl n notice to the
project appellant, at the time of payment of school fees, mitigation payment or other exactions ("Fees"), of the 90 -day period to protest the impo it'
of these
Fees and (2) the amount of the fees. Therefore, in accordance with section 66020 of the Government code and other applicable law, this Notice hall serve to
advise you that the 90 -day protest period in regard to such Fees or the validity thereof, commences with the payment of the fees or per" ce of any other
requirements as described in section 66020 of the Government code. Additionally, the amount of the fees imposed is as herein set forth, whether payable at this
time or in whole or in part prior to issuance of a Certificate of Occupancy. As in the latter, the 90 days starts on the date hereof. This Certificate of
Compliance is valid for thirty (30) days from the date of issuance. Extension will be granted only for good cause, as determined by the School District, and up
to three (3) such extensions may be granted.
1:. IE.(IriiC41 h t , -moi. i0I 11/2010
t.r?Yi � ,, r
'.� Mt
PGA WEST..
RESIDENTIAL ASSOCIATION, INC.
March 4, 2011
Mr. & Mrs. Richard Vershure
55-632 Oak Tree
La Quinta, CA 9_2?53 -
RE: 55-632 Oak Tree - Enclose Exterior Covered Patio
Dear Mr. & Mrs. Vershure,
M
Page 1 of 2
ne Architecctwal Committee has reviewed your A•chitectu;•ai vaiiauoc rcyuesL. The l.rupust'-d
exterior modifications to your unit as shown on drawings dated August 18, 2010, sheets CS, 1-5'
and RMA, prepared by Lench Design Studio, Ine. are acceptable. T:ne interior rer vations a,*e
not part of our review. The requirement to maintain the existing structural imegrity and
compliance .Nith the building code is the homeowner's and their respective architect and
engineer. The Homeowner's Association C C&R' the +rdnitem-al Guidelines and the
lViaintenance and Indemnity Agreement armyIbis vatiartee. The. follrv. ir_g cor�T ,t� and
requirements are applicable;
1. The HOA must be in receipt of contractor's current insurance certificates prior to the start
of any work. The certificates are to be provided to the HOA directly from the insurance
carrier. As of today, the HOA has not received proof of general liability, workers
compensation and auto for 7 C's Construction.
2. Provide a copy of the City of La Quinta building department permit prior to starting any
work.-
3.
ork.3. Contact the Maintenance Manager, William Aceves, prior to starting any work, to inspect
roof area adjacent to the new work.
4. The contractor is not allowed te.stockpile any materia', equipment or construction debris
in the streeL
5. The street glitters are not to be used for concrete and constraction.material clean up. The
street is to be broom -washed, as needed each day during construction. Neither debris nor
dirt is to be washed down the gutter.
6. The street and work area are to be kept clean daily.
The contraztor is to observe all Association rules and regulations.
S. The centractor to repair andror replace -any damaged irrigation, .landscape, hardseape,
lights or street surface to the satisfaction of the HOA.
9. New stucco joints to existing to have proper paper, lathing tie-ins to prevent water
intrusion.
10. New paint to be Weathemtaster Vista 1900 or equal hybrid elastomeri: paint. Contact
the HOA for }faint color.
A1. Confirm the routing of gas supple for the cook top if it is a ;as unit.
54-320 Southern Hills, Le Quinta, California 92253-5665, Telephone 760-771-1234 FAX 760-771-5125
Z -d
Page 2 of 2
12. Upon completion, the homeowner is required to provide a signed copy of the city
inspection card along with the Notice of Completion form and the Contractor's Notice of
Completion Certification letter (enclosed).
13. A reasonable construction time is 90 days.
14. Any work requiring penetration or routing of lines in areas outside of the work area
should be noted by the HOA maintenance manager for his information.
15. Prior to the start of any work, the HOA must be in receipt of your contactor' 3 current
proof of insurance documents; which are to .be provide .directly from the contractor's
insurance carrier(s) and a copy of the contractor's stare license.
16. Mainienance and fndemni1y Agreement to be signed at the beginning and reviewed at the
conclusion of the project All applicable'improvements' shall be listed on the agreement
and recorded with the County of Riverside.
If 1 may be of ftrtlter assistance.—please contact me at the 140A office; (760) 771-134,
Extension 15.
Cordially
oil
Kelly McGalliard b
Operations Manager
For tate Architectural Committee
KM-'bvf
Enc. 1
cc: Architectural Committee
ggd
a
BUILDING ENERGY ANALYSIS REPORT
PROJECT:
Vershure Residence
55-632 Oak Tree
La Quinta, CA
Project Designer:
Report Prepared by:
Joan D. Hacker
Insu-form, Inc.
77-810 Las Montanas Road, Suite 201
Palm Desert, Ca 92211
760-345-1352
r
�l APR 1 j 2011
Job Number
Date:
4/19/2011
t ,,
O tf(GVl
CITY OF LA QUINTA
BUILDING & SAFETY DEPT.
APPROVED
FOR CONSTRUCTION
)AT [94 � 61 BY laii
The EnergyPro computer program has been used to perform the calculations summarized in this compliance eport. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2008 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC — www.energysoft.com.
EnergyPro 5.1 by EnergySoft User Number: 2655 RunCode: 2011-04-19710:44:35 ID:
TABLE OF CONTENTS I
Cover Page 1
Table of Contents 2
Form CF -1 R Certificate of Compliance 3
Form MF -1 R Mandatory Measures Summary 10
HVAC System Heating and Cooling Loads Summary 13
EnergyPro 5.1 by EnergySoR Job Number: ID: User Number: 2655
PERFORMANCE CERTIFICATE: Residential Part 1 of 5
CF -1 R
Project Name
Vershure Residence
Building Type m Single Family O Addition Alone
❑ Multi Family ® Existing+ Addition/Alteration
Date
4/19/2011
Project Address
55-632 Oak Tree La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. Floor Area
2,8
Addition
51
# of Stories
1
FIELD INSPECTION ENERGY CHECKLIST
❑ Yes ❑ No HERS Measures -- If Yes, A CF -4R must be provided per Part 2 of 5 of this form.
❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details.
INSULATION
Construction Type
Area Special
Cavity Features see Part 2 of 5 Status
Slab Unheated Slab -on -Grade
None 2, 838 Perim = 86' Existing
Wall Wood Framed
R-13 969 Existing
Door Opaque Door
None 20 Existing
Roof Wood Framed Attic
R-22 2,838 Existing
Slab Unheated Slab -on -Grade
None 51 Perim = 15' New
Wall Wood Framed
R-13 154 New
Roof Wood Framed Attic
R-38 51 New
FENESTRATION U-
Orientation Area Factor
Exterior
SHGC Overhang Sidefins Shades Status
Front (W) 25.0 0.710
0.73 2.0 none Bug Screen Existing
Front (W) 20.0 0.710
0.73 2.0 none Bug Screen Existing
Front (W) 30.0 0.710
0.73 2.0 none Bug Screen Existing
Left (N) 4.0 0.710
0.73 2.0 none Bug Screen Existing
Left (N) 35.0 0.710
0.73 2.0 none Bug Screen Existing
Left (N) 40.0 0.710
0.73 2.0 none Bug Screen Existing
Left (N) 20.0 0.710
0.73 2.0 none Bug Screen Existing
Left (N) 20.0 0.710
0.73 2.0 none Bug Screen Existing
Rear (E) 21.0 0.710
0.73 2.0 none Bug Screen Existing
Rear (E) 4.0 0.710
0.73 2.0 none Bug Screen Existing
Rear (E) 15.0 0.710
0.73 2.0 none Bug Screen Existing
HVAC SYSTEMS
Ot . Heating Min. Eff Cooling Min. Eff Thermostat Status
2 Central Furnace 78% AFUE Split Air Conditioner 12.0 SEER Setback
Existing
HVAC DISTRIBUTION
Location Heating
Duct
Cooling Duct Location R -Value Status
Living Zone Ducted
Ducted Attic, Ceiling Ins, vented 4.2
Existing
WATER HEATING
Ot . Type Gallons Min. Eff Distribution Status
Ener Pro 5.1 by Ener Soft User Number: 2655 RunCode: 2011-04-19T10:44:35 ID:
Pa e 3 of 13
PERFORMANCE CERTIFICATE: Residential Part 1 of 5
CF -1 R
Project Name
Vershure Residence
Building Type m Single Family O Addition Alone
❑ Multi Family ® Existing+ Addition/Alteration
Date
4/19/2011
Project Address
55-632 Oak Tree La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. Floor Area
2,889
Addition
51
# of Stories
1
FIELD INSPECTION ENERGY CHECKLIST
❑ Yes IZI No HERS Measures -- If Yes, A CF -4R must be provided per Part 2 of 5 of this form.
❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details.
INSULATION
Construction Type
Area Special
Cavity Features see Part 2 of 5 Status
FENESTRATION U-
Orientation Area Factor
Exterior
SHGC Overhang Sidefins Shades Status
Rear (E) 93.4 0.710
0.73 2.0 none Bug Screen Existing
Rear (E) 40.0 0.710
0.73 2.0 none Bug Screen Existing
Right (S) 30.0 0.710
0.73 2.0 none Bug Screen New
Right (S) 13.5 0.710
0.73 2.0 none Bug Screen Existing
Right (S) 10.0 0.710
0.73 2.0 none Bug Screen Existing
Rear (E) 53.4 0.710
0.73 2.0 none Bug Screen New
HVAC SYSTEMS
Qty. Heating Min. Eff Cooling Min. Eff Thermostat Status
HVAC DISTRIBUTION
Location Heating
Duct
Cooling Duct Location R -Value Status
WATER HEATING
Qty. Type Gallons Min. Eff Distribution Status
Ener Pro 5.1 by Ener Soft User Number: 2655 RunCode: 2011-04-19710:44:35 ID:
Pa e 4 of 13
PERFORMANCE CERTIFICATE: Residential Part 2 of 5 CF -1 R
Project Name
Vershure Residence
Building Type ® Single Family ❑ Addition Alone
1 ❑ Multi Family ® Existing+ Addition/Alteration
Date
4/19/2011
SPECIAL FEATURES INSPECTION CHECKLIST
The enforcement agency should pay special attention to the items specified in this checklist. These items require special written
justification and documentation, and special verification to be used with the performance approach. The enforcement agency
determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of
the special justification and documentation submitted.
HERS REQUIRED VERIFICATION
Items in this section require field testing and/or verification by a certified HERS Rater. The inspector must receive a
completed CF -4R form for each of the measures listed below for final to be given.
EnergyPro 5.1 by Energ ySoft User Number: 2655 RunCode: 2011-0419710:44:35 ID: Page 5 of 13
PERFORMANCE CERTIFICATE: Residential Part 3 of 5 CF -1 R
Project Name
Building Type m Single Family ❑ Addition Alone
Date
VerShure Residence
1 ❑ Multi Family m Existing+ Addition/Alteration
1411912011
ANNUAL ENERGY USE SUMMARY
Standard Proposed Margin
TDV kBtu/ft2- r
Space Heating 4.67 3.83 0.85
Space Cooling 124.53 120.09 4.43
Fans 27.02 26.02 1.00
Domestic Hot Water 14.14 14.14 0.00
Pumps 0.00 0.00 0.00
Totals 170.36 164.08 6.28
Percent Better Than Standard: 3.7%
BUILDING COMPLIES - NO HERS VERIFICATION REQUIRED
Fenestration
Building Front Orientation: (vv) 270 deg Ext. Walls/Roof Wall Area Area
Number of Dwelling Units: 1.00 (w) 360 75
Fuel Available at Site: Natural Gas (N) 350 119
Raised Floor Area: 0 (E) 522 227
Slab on Grade Area: 2,889 (S) 385 54
Average Ceiling Height: 9.0 Roof 2,889 0
Fenestration Average U -Factor: 0.71 TOTAL: 474
Average SHGC: 0.73 Fenestration/CFA Ratio: 16.4%
REMARKS
STATEMENT OF COMPLIANCE
This certificate of compliance lists the building features and specifications needed
to comply with Title 24, Parts 1 the Administrative Regulations and Part 6 the
Efficiency Standards of the California Code of Regulations.
The documentation author hereby certifies that the documentation is accurate and complete.
Documentation Author
Company Insu-form, Inc.
I 4/19/2011
Address 77-810 Las Montanas Road, Suite 201 Name Joan D. Hacker
Cit /State/Zip Palm Desert, Ca 92211 Phone 760-345-1352 sisIdy Date
The individual with overall design responsibility hereby certifies that the proposed building design represented in this set
of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and
with any other calculations submitted with this permit application, and recognizes that compliance using duct design,
duct sealing, verification of refrigerant charge, insulation installation quality, and building envelope sealing require
installer testing and certification and field verification by an approved HERS rater.
Designer or Owner (per Business & Professions Code)
Company (J50 )cd
Address V'D TBS. y� � Named Q�'
City/State/Zip ./J ,1"�3j[` Phone 10 igned License# Date
(yam
Ener Pro 5.1 by Ene Soft User Number.' 2655 RunCode: 2011-04-19T10:44:35 ID: Page 6 of 13
CERTIFICATE OF COMPLIANCE:
Residential Part 4 of 5 CF -1 R
Project Name
Vershure Residence
Building Type m Single Family ❑ Addition Alone
❑ Multi Family m Existing+ Addition/Alteration
Date
1411912011
OPAQUE SURFACE DETAILS
Surface
Type Area
LlInsulation
Factor Cavi Exterior Frame Interior Frame Azm
Joint Appendix
Tilt Status 4 Location/Comments
Slab
2,838
0.730 None
0
180 Existing 4.4.7-A1
Existing Living
Wall
265
0.102 R-13
270
90 Existing 4.3.1-A3
Existing Living
Door
20
1.450 None
270
90 Existing 4.5.1-A1
Existing Living
Wall
231
0.102 R-13
0
90 Existing 4.3.1-A3
Existing Living
Wall
1771
0.102 R-13
90
90 Existing 4.3.1-A3
Existing Living
Wall
297
0.102.R-13
180
90 Existing 4.3.1-A3
Existing Living
Roof
2,838
0.043 R-22
270
0 Existing 4.2.1-A6
Existing Living
Wall
260
0.102 R-13
90
90 Removec 4.3.1-A3
Existing Living
Wall
230
0.102 R-13
180
90 Removec 4.3.1-A3
Existing Living
Slab
51
0.730 None
0
180 New 4.4.7-A1
Addition
Wall
119
0.102 R-13
90
90 New 4.3.1-A3
Addition
Wall
351
0.102 R-13
180
90 New 4.3.1-A3
Addition
Roof
511
0.025 R-38
270
0 New 4.2.1-A21
Addition
--------------------
FENESTRATION SURFACE DETAILS
ID
I Type
Area Ll -Factor'
SHGC2
Azm Status
Glazing Type
Location/Comments
1
Window
25.0 0.710 1 Default
0.73 1 Default
270 Existing
Double Metal Clear
Existing Living
2
Window
20.0 0.710 Default
0.73 Default
270 Existing
Double Metal Clear
Existing Living
3
Window
30.0 0.710 Default
0.73 Default
270 Existing
Double Metal Clear
Existing Living
4
Window
4.0 0.710 Default
0.73 Default
0 Existing
Double Metal Clear
Existing Living
5
Window
35.0 0.710 Default
0.73 Default
0 Existing
Double Metal Clear
Existing Living
6
Window
40.0 0.710 Default
0.73 Default
0 Existing
Double Metal Clear
Existing Living
7
Window
20.0 0.710 Default
0.73 Default
0 Existing
Double Metal Clear
Existing Livin
8
Window
20.0 0.710 Default
0.73 Default
0 Existing
Double Metal Clear
Existing Living
9
Window
21.0 0.710 Default
0.73 Default
90 Existing
Double Metal Clear
Existing Living
10
Window
4.0 0.710 Default
0.73 Default
90 Existing
Double Metal Clear
Existing Living
11
Window
40.0 0.710 Default
0.73 Default
90 Removed Double Metal Clear
Existing Living
12
Window
15.0 0.710 Default
0.73 Default
90 Existing
Double Metal Clear
Existing Living
13
Window
93.4 0.710 Default
0.73 Default
90 Existing
Double Metal Clear
Existing Living
14
Window
40.0 0.710 Default
0.73 Default
90 Existing
Double Metal Clear
Existing Living
15
Window
40.0 0.710 1 Default
0.73 Default
180 Removed Double Metal Clear
Existing Living
16
Window
30.0 0.710 Default
1 0.73 Default
180 New
Double Metal Clear
I Existing Living
(1) U -Factor Type: 116-A = Default Table from Standards, NFRC = Labeled Value
2 SHGC Type: 116-B = Default Table from Standards, NFRC = Labeled Value
EXTERIOR SHADING DETAILS
ID
Exterior Shade Type SHGC
Window
H t Wd
Ove hanq Left Fin
Len H t LExt RExt Dist Len
Right Fin
H t Dist Len H t
1
Bug Screen
0.76
5.0 5.0
2.0 0.1
2.0 2.0
2
Bug Screen
0.76
5.0 2.0
2.0 0.1
2.0 2.0
3
Bug Screen
0.76
5.0 6.0
2.0 0.1
2.0 2.0
4
Bug Screen
0.76
1.0 4.0
2.0 0.1
2.0 2.0
5
Bug Screen
0.76
5.0 7.0
2.0 0.1
2.0 2.0
6
Bug Screen
0.76
6.8 6.0
2.0 0.1
2.0 2.0
7
Bug Screen
0.76
5.0 4.0
2.0 0.1
2.0 2.0
8
Bug Screen
0.76
5.0 4.0
2.0 0.1
2.0 2.0
9
Bug Screen
0.76
3.0 7.0
2.0 0.1
2.0 2.0
10
Bug Screen
0.76
1.0 4.0
2.0 0.1
2.0 2.0
11
Bug Screen
0.76
6.8 6.0
2.0 0.1
2.0 2.0
12
Bug Screen
0.76
3.0 5.0
2.0 0.1
2.0 2.0
13
Bug Screen
0.76
6.8 14.0
2.0 0.1
2.0 2.0
14
Bug Screen
0.76
6.8 6.0
2.0 0.1
2.0 2.0
15
Bug Screen
0.76
5.0 8.0
2.0 0.1
2.0 2.0
16
IBug Screen
0.76
5.0 6.0
2.0 0.1
2.0 2.0
EnergyPro
5.1 by Ener Soft User Number.- 2655 Runcode: 2011-04-19710:44:35 ID:
Pae 7 of 13
CERTIFICATE OF COMPLIANCE: Residential Part 4 of 5 CF -1 R
Project Name
Vershure Residence
Building Type m Single Family ❑ Addition Alone
❑ Multi Family m Existing+ Addition/Alteration
Date
4/19/2011
OPAQUE SURFACE DETAILS
Surface U- Insulation Joint Appendix
Type Area Factor Cavity Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments
FENESTRATION SURFACE DETAILS
ID Type Area U -Factor SHGC2 Azm Status Glazing Type Location/Comments
17 Window 13.5 0.710 Default 0.73 Default 180 Existing Double Metal Clear Existing Living
18 Window 10.0 0.710 Default 0.73 Default 180 Existing Double Metal Clear Existing Living
19 Window 53.4 0.710 Default 0.73 Default 90 New Double Metal Clear Addition
(1) U -Factor Type: 116-A = Default Table from Standards, NFRC = Labeled Value
2 SHGC Type: 116-B = Default Table from Standards, NFRC = Labeled Value
EXTERIOR SHADING DETAILS
Window Ove hang Left Fin Right Fin
ID Exterior Shade Type SHGC Hat Wd Len Hat LExt RExt Dist Len Hat Dist Len Hat
17 Bug Screen 0.76 3.0 4.5 2.0 0.1 2.0 2.0
18 Bug Screen 0.76 2.0 5.0 2.0 0.1 2.0 2.0
19 Bug Screen 0.76 6.8 8.0 2.0 0.1 2.0 2.0
Ener Pro 5.1 by EnerqySoft User Number: 2655 RunCode: 2011-04-19710:44:35 ID: Page 8 of 13
CERTIFICATE OF COMPLIANCE: Residential Part 5 of 5) CF-1 R
Project Name
Vershure Residence
Building Type ❑ Single Family ❑ Addition Alone
❑ Multi Family ❑ Existing+ Addition/Alteration
Date
4/19/2011
BUILDING ZONE INFORMATION
System Name Zone Name
Floor Area ft
New Existing Altered Removed Volume Year Built
Living Zone Existing Living
2,838
25,542 1981
Addition
51
459
Totals 1 511 2,8381 01 0
HVAC SYSTEMS
System Name Qty. I Heating Type
Min. Eff. Cooling Type Min. Eff. Thermostat Type Status
Living Zone 2 Central Furnace
78% AFUE Split Air Conditioner 12.0 SEER Setback
Existing
HVAC DISTRIBUTION
System Name Heating
Duct
Cooling Duct Location R-Value
Ducts
Tested? Status
Living Zone Ducted
Ducted Attic, Ceiling Ins, vented 4.2
❑ Existing
WATER HEATING SYSTEMS
S stem Name
Qty.
Type
Distribution
Rated
Input
Btuh
Tank
Cap.
al
Energy
Factor
or RE
Standby
Loss or
Pilot
Ext.
Tank
Insul. R-
Value
Status
Standard Gas 50 gal or Le
1
Small Gas
No Pipe Insulation
40,000
50
0.53
n/a
n/a
Existing
MULTI-FAMILY WATER
HEATING
DETAILS
HYDRONIC
HEATING
SYSTEM
PIPING
Control
Hot Water Piping Length
ft
0
0
.Z6
¢ —
System Name
Pipe
Length_
Pipe
Diameter
Insul.
Thick.
Qty. HP
Plenum Outside Buried
Ener Pro 5.1 by Ener Soft User Number.' 2655
RunCode: 2011-04-19710:44:35 ID:
Page 9 of 13
MANDATORY MEASURES SUMMARY: Residential Pae 1 of 3 MF -1 R
Project Name
Vershure Residence
Date
1 4/19/2011
NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of
the compliance approach used. More stringent energy measures listed on the Certificate of Compliance (CF -1 R, CF -1 R -ADD, or CF -
1 R -ALT Form) shall supersede the items marked with an asterisk (*) below. This Mandatory Measures Summary shall be incorporated
into the permit documents, and the applicable features shall be considered by all parties as minimum component performance
specifications whether they are shown elsewhere in the documents or in this summary. Submit all applicable sections of the MF -1 R
Form with plans.
Building Envelope Measures:
116 (a)1: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage.
§116(a)4: Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, certified Solar Heat Gain
Coefficient SHGC and infiltration that meets the requirements of 10-111 (a).
117: Exterior doors and windows are weather-stripped; all joints and penetrations are caulked and sealed.
118(a): Insulationspecified or installed meets Standards for Insulating Material. Indicate type and include on CF -6R Form.
§118(1): The thermal emittance and solar reflectance values of the cool roofing material meets the requirements of §118(1) when the
installation of a Cool Roof is specified on the CF -1 R Form.
*§1 50 a : Minimum R-19 insulation in wood -frame ceiling orequivalent U -factor.
150(b): Loose fill insulation shall conform with manufacturer's installed design labeled R -Value.
*§150(c): Minimum R-13 insulation in wood -frame wall orequivalent Ll -factor.
*§1 50 d : Minimum R-13 insulation in raised wood -frame floor orequivalent LI -factor.
150(f): Air retarding wrap is tested, labeled and installed according to ASTM E1677-95 2000 when specified on the CF -1 R Form.
1 50 : Mandatory Vapor barrier installed in Climate Zones 14 or 16.
§150(1): Water absorption rate for slab edge insulation material alone without facings is no greater than 0.3%; water vapor permeance
rate is no greater than 2.0 erm/inch and shall be protected from physical damage and UV light deterioration.
Fireplaces, Decorative Gas Appliances and Gas Log Measures:
150 a 1A: Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox.
§150(e)1 B: Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is
equipped with a with a readily accessible, operable, and tight -fitting damper and or a combustion -air control device.
§150(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the
outside of the building, are prohibited.
Space Conditioning, Water Heating and Plumbing System Measures:
§110-§113: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified by the Energy
Commission.
§113(c)5: Water heating recirculation loops serving multiple dwelling units and High -Rise residential occupancies meet the air release
valve, backflow prevention, pump isolation valve, and recirculation loop connection requirements of §113(c)5.
§115: Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances
(appliances with an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool and
spa heaters.
150(h): Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA.
§1500): Heating systems are equipped with thermostats that meet the setback requirements of Section 112(c).
§1500)1A: Storage gas water heaters rated with an Energy Factor no greater than the federal minimal standard are externally wrapped
with insulation having an installed thermal resistance of R-12 or greater.
§1500)1 B: Unfired storage tanks, such as storage tanks or backup tanks for solar water -heating system, or other indirect hot water
tanks have R-12 external insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the
tank.
§1500)2: First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire length of
recirculating sections of hot water pipes are insulated per Standards Table 150-13.
§150(j)2: Cooling system piping (suction, chilled water, or brine lines),and piping insulated between heating source and indirect hot
water tank shall be insulated to Table 150-B and Equation 150-A.
§1500)2: Pipe insulation for steam hydronic heating systems or hot water systems >15 psi, meets the requirements of Standards Table
123-A.
150(j)3A: Insulation is protected from damage, including that due to sunlight, moisture equipment maintenance and wind.
§1 500)3A: Insulation for chilled water piping and refrigerant suction lines includes a vapor retardant or is enclosed entirely in
conditioned space.
150(j)4: Solar water -heating systems and/or collectors are certified by the Solar Rating and Certification Corporation.
EnergyPro 5.1 by EnergySoff User Number: 2655 RunCode: 2011-04-19710:44:35 ID: Page 10 of 13
MANDATORY MEASURES SUMMARY: Residential (Page 2 of 3 MF -1 R
Project Name
Date
Vershure Residence
1411912011
§150(m)1: All air -distribution system ducts and plenums installed, are sealed and insulated to meet the requirements of CMC Sections
601, 602, 603, 604, 605 and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minimum installed level of R-
4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the
applicable requirements of UL 181, UL 181A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is
used to seal openings reater than 1/4 inch the combination of mastic and either mesh or tape shall be used
§150(m)1: Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed
sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may
contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area
of the ducts.
§150(m)2D: Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes
unless such tape is used in combination with mastic and draw bands.
150(m)7: Exhaust fans stems have back draft or automatic dampers.
§150(m)8: Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated
dampers.
§150(m)9: Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar
radiation that can cause de radation of the material.
150 m 10: Flexible ducts cannot have porous inner cores.
§150(o): All dwelling units shall meet the requirements of ANSI/ASHRAE Standard 62.2-2007 Ventilation and Acceptable Indoor Air
Quality in Low -Rise Residential Buildings. Window operation is not a permissible method of providing the Whole Building Ventilation
required in Section 4 of that Standard.
Pool and Spa Heating Systems and Equipment Measures:
§114(a): Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency
Regulations; an on-off switch mounted outside of the heater; a permanent weatherproof plate or card with operating instructions; and
shall not use electric resistance heating ora pilot light.
§114(b)1: Any pool or spa heating equipment shall be installed with at least 36" of pipe between filter and heater, or dedicated suction
and return lines or built-up connections for future solar heating.
114(b)2: Outdoor pools ors as that have a heat pump or gas heater shall have a cover.
§114(b)3: Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or
programmed to run only during off-peak electric demand periods.
150 : Residential pool systems orequipment meet the pump sizing, flow rate, piping, filters, and valve requirements of §150
Residential Lighting Measures:
§150(k)1: High efficacy luminaires or LED Light Engine with Integral Heat Sink has an efficacy that is no lower than the efficacies
contained in Table 150-C and is not a low efficacy luminaire asspecified by §150 k 2.
§150(k)3: The wattage of permanently installed luminaires shall be determined asspecified by §130(d).
§150(k)4: Ballasts for fluorescent lamps rated 13 Watts or greater shall be electronic and shall have an output frequency no less than
20 kHz.
§150(k)5: Permanently installed night lights and night lights integral to a permanently installed luminaire or exhaust fan shall contain
only high efficacy lamps meeting the minimum efficacies contained in Table 150-C and shall not contain a line -voltage socket or line -
voltage lamp holder; OR shall be rated to consume no more than five watts of power as determined by §130(d), and shall not contain a
medium screw -base socket.
150(k)6: LiQhting integral to exhaust fans, in rooms other than kitchens, shall meet the applicable requirements of §150(k).
150(k)7: All switching devices and controls shall meet the requirements of §150(k)7.
§150(k)8: A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy.
EXCEPTION: Up to 50 watts for dwelling units less than or equal to 2,500 ft2 or 100 watts for dwelling units larger than 2,500 ft2 may be
exempt from the 50% high efficacy requirement when: all low efficacy luminaires in the kitchen are controlled by a manual on occupant
sensor, dimmer, energy management system (EMCS), or a multi -scene programmable control system; and all permanently installed
luminaries in garages, laundry rooms, closets greater than 70 square feet, and utility rooms are high efficacy and controlled by a
manual -on occupant sensor.
§150(k)9: Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of
illuminated cabinet.
EnergyPro 5.1 by EnergySoft User Number: 2655 RunCode: 2011-04-19710:44:35 ID: Page 11 of 13
MANDATORY MEASURES SUMMARY: Residential (Page 3 of 3 MF -1 R
Project Name
Date
Vershure Residence
4/19/2011
§150(k)10: Permanently installed luminaires in bathrooms, attached and detached garages, laundry rooms, closets and utility rooms
shall be high efficacy.
EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by a manual -on
occupant sensor certified to comply with the applicable requirements of §119.
EXCEPTION 2: Permanently installed low efficacy luminaires in closets less than 70 square feet are not required to be controlled by a
manual -on occupancy sensor.
§150(k)l 1: Permanently installed luminaires located in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms,
closets, and utility rooms shall be high efficacy luimnaires. EXCEPTION 1: Permanently installed low efficacy luminaires shall be
allowed provided they are controlled by either a dimmer switch that complies with the applicable requirements of §119, or by a manual -
on occupant sensor that complies with the applicable requirements of §119. EXCEPTION 2: Lighting in detached storage building less
than 1000 square feet located on a residential site is not required to comply with §150 k 11.
§150(k)12: Luminaires recessed into insulated ceilings shall be listed for zero clearance insulation contact (IC) by Underwriters
Laboratories or other nationally recognized testing/rating laboratory; and have a label that certifies the lumiunaire is airtight with air
leakage less then 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; and be sealed with a gasket or caulk between
the luminaire housing and ceiling.
§150(k)13: Luminaires providing outdoor lighting, including lighting for private patios in low-rise residential buildings with four or more
dwelling units, entrances, balconies, and porches, which are permanently mounted to a residential building or to other buildings on the
same lot shall be high efficacy. EXCEPTION 1: Permanently installed outdoor low efficacy luminaires shall be allowed provided that
they are controlled by a manual on/off switch, a motion sensor not having an override or bypass switch that disables the motion sensor,
and one of the following controls: a photocontrol not having an override or bypass switch that disables the photocontrol; OR an
astronomical time clock not having an override or bypass switch that disables the astronomical time clock; OR an energy management
control system (EMCS) not having an override or bypass switch that allows the luminaire to be always on EXCEPTION 2: Outdoor
luminaires used to comply with Exceptionl to §150(k)l3 may be controlled by a temporary override switch which bypasses the motion
sensing function provided that the motion sensor is automatically reactivated within six hours. EXCEPTION 3: Permanently installed
luminaires in or around swimming pool, water features, or other location subject to Article 680 of the California Electric Code need not
be high efficacy luminaires.
§150(k)l4: Internally illuminated address signs shall comply with Section 148; OR not contain a screw -base socket, and consume no
more than five watts of power as determined according to 130 d .
§150(k)15: Lighting for parking lots and carports with a total of for 8 or more vehicles per site shall comply with the applicable
requirements in Sections 130, 132, 134, and 147. Lighting for parking garages for 8 or more vehicles shall comply with the applicable
requirements of Sections 130, 131, 134, and 146.
§150(k)16: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more
dwelling units shall be high efficacy luminaires. EXCEPTION: Permanently installed low efficacy luminaires shall be allowed provided
that they are controlled by an occupant sensors certified to comply with the applicable requirements of 119.
EnergyPro 5.1 by EnergySoft User Number: 2655 RunCode: 2011-04-19710:44:35 /D: Page 12 of 13
HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY
Project Name
Vershure Residence
Date
4/19/2011
System Name
Living Zone
Floor Area
2,889
ENGINEERING CHECKS
SYSTEM LOAD
Number of Systems
2
COIL COOLING
CFM Sensible
Total Room Loads 2,428 50,763
Return Vented Lighting 0
Return Air Ducts 4,304
Return Fan 0
Ventilation 0 0
Supply Fan 0
Supply Air Ducts 4,304
TOTAL SYSTEM LOAD 1 59,371
PEAK COIL HTG.
PEAK
Heating System
Latent CFM
Sensible
Output per System 53,000
3,641 976
37,774
Total Output Btuh 106,000
Output Btuh/s ft 36.7
2,684
Cooling System
0
Output per System 42,000
07 0
0
Total Output Btuh 84,000
3,641
0
Total Output Tons 7.0
2,684
Total Output Btuh/s ft 29.1
Total Output s ft/Ton 412.7
43,141
Air System
CFM per System
1,300
HVAC EQUIPMENT SELECTION
Airflow cfm
2,600
Existing HVAC 62,957
10,670
106,000
Airflow cfm/s ft 0.90
Airflow cfm/Ton 371.4
Outside Air %
0.0%
Total Adjusted System Output 1 62,957
(Adjusted for Peak Design conditions)
TIME OF SYSTEM PEAK
10,670 1 106,000
Aug 3 PM Jan 1 AM
Outside Air cfm/s ft 0.00
Note: values above given at ARI conditions
HEATING SYSTEM PSYCHROMETRICS
Airstream Temperatures at Time of Heating Peak
26 OF 69 OF
Outside Air
0 cfm Supply Fan
2,600 cfm
69 OF
A
69 OF 107 OF
Heating Coil
4 1 3
106 OF
ROOM
70 OF
COOLING SYSTEM PSYCHROMETICS Airstream Temperatures at Time of Cooling Peak
112/78°F 80/64°F
Outside Air Ar
0, cfm
80/64°F
80/64°F 57/56°F
c
c
Supply Fan Cooling Coil 58 / 56 OF
..... ........_...........
2,600 cfm.
45.6% ROOM
78/64°F
EnergyPro 5.1 by EnergySoft User Number: 2655 RunCode: 2011-0419710:44:35 /D:
Page 13 of 13