The URL can be used to link to this page

08-1560 (RC)Tit!t 4�� P.O. BOX 1504 VOICE (760) 777-7012 78-495 CALLE TAMPICO FAX (760) 777-7011 LA QUINTA, CALIFORNIA 92253 BUILDING & SAFETY DEPARTMENT INSPECTIONS (760) 777-7153 BUILDING PERMIT Date: 12/23/08 Application Number: 08-00001560 Owner: Property Address: 45280 SEELEY DR EISENHOWER MEDICAL CENTER APN: 604-040-094- - - 39000 BOB HOPE DRIVE Application description: REMODEL - COMMERCIAL RANCHO MIRAGE, CA 92270 Property Zoning: TOURIST COMMERCIAL (760) 773-1449 Application valuation: 4224960 Contractor: Applicant: Architect or Engineer: WDL CONSTRUCTION 4 �f 74075 EL PASEO, SUITE B3 DEC6` PALM DESERT, CA 92260 / (760) 674-9553 CITY OFLJI�B��' Lic. No.: 741137 FI'VA\j(, LICENSED CONTRACTOR'S DECLARATION 1 hereby affirm under penalty of perjury that I am. licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect. License Class: B License No.: 741137 %e-5ate: �l Zy-&Vlllontractor: OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: 1—) 1, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_ 1 1, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). (_ 1 I am exempt under Sec. , B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: _ Lender's Address: LQPERMIT WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as. provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 1 have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier STATE FUND Policy Number 1424883-2008 I certify that, in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if I should become subject to the workers' compensation provisions of Section f 3700ofthe Labor Code, I shall forthwith comply with those provisions. O/ ®Applicant: WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of is county to enter upon the above-mentioned propertor spection purp ate •A"No Signature (Applicant or Agent): S � Application Number . . . . . 08-00001560 ------ Structure Information 2ND & 3RD FLR T.I. ----- Other struct info . . . . . CODE EDITION 2007 FIRE SPRINKLERS YES MIXED-USE OCCUPANCY B/A-3/S-1 OCCUPANT LOAD .00 ---------------------------------------------------------------------------- 2ND FLOOR SQUARE FOOTAGE 13256.00 Permit . . . BUILDING PERMIT Additional desc . . 2ND.3RD FLOOR T.I. Permit Fee . . . . 9989.50 Plan Check Fee 6493.18 Issue Date . . . . Valuation . . . . 4224960 Expiration Date . . 6/21/09 Qty Unit Charge Per Extension BASE FEE 3539.50 3225.00 ---------------------------------------------------------------------------- 2.0000 THOU BLDG 1,000,001 - UP 6450.00 Permit . . . ELECT - ADD/ALT/REM Additional desc . . Permit Fee . . . . 762.05 Plan Check Fee 190.51 Issue Date . . . . Valuation . . . . 0 Expiration Date . . 6/21/09 Qty Unit Charge Per Extension BASE FEE 15.00 20.00 .7500 PER ELEC DEVICE/FIXTURE 1ST 20 15.00 3.00 3.0000 EA ELEC PWR APP <=1 9.00 7.00 18.5000 EA ELEC SVC <=600V/<=200A 129.50 1319.00 ---------------------------------------------------------------------------- .4500 EA ELEC DEVICE/FIXTURE >20 593.55 Permit . . . MECHANICAL Additional desc . . Permit Fee . . . . 102.00 Plan Check Fee 25.50 Issue Date . . . . Valuation . . . . 0 Expiration Date 6/21/09 Qty Unit Charge Per Extension BASE FEE 15.00 15.00 4.5000 EA MECH VENT INST/ DUCT ALT 67.50 3.00 ---------------------------------------------------------------------------- 6.5000 EA MECH VENT FAN 19.50 Permit . . . . . . PLUMBING Additional desc . LQPERMIT Application Number . . . . 08-00001560 Permit . . . . . . PLUMBING Permit Fee . . . . 582.00 Plan Check Fee 145.50 Issue Date . . . . Valuation . . . . 0 Expiration Date . . 6/21/09 Qty Unit Charge Per Extension BASE FEE 15.00 94.00 6.0000 EA PLB FIXTURE 564.00 1.00 3.0000 EA PLB WATER INST/ALT/REP 3.00 ---------------------------------------------------------------------------- Special Notes and Comments 2ND & 3RD FLOOR T.I.[2ND =13,256 SF B/A-3 OCC, 3RD = 25,619 SF B OCC.) TYPE II-1HR SHELL (per 2001 CODE) 2ND FLR OCC.LOAD = 218, 3RD FLR OCC. LOAD = 256. 2007 CODES **PERMIT DOES NOT INCLUDE SURGERY CENTER AREA OF 13,919 SF - 2ND FLR** ---------------------------------------------------------------------------- Other Fees . . . . . . . . . ACCESSIBILITY PLAN REVIEW 649.32 ENERGY REVIEW FEE 649.32 STRONG MOTION (SMI) - COM 887.24 Fee summary Charged Permit Fee _Total 11435.55 Plan Check Total 6854.69 Other Fee Total 2185.88 Grand Total 20476.12 LQPERMIT Paid Credited Due ---------- ---------- ---------- .00 .00 11435.55 .00 .00 6854.69 .00 .00 2185.88 .00 .00 20476.12 Bin # Qy of La QUinta Building 8F Safety Division P.O. Box 1504, 78-495 Calle Tampico La Quinta, CA 92253 - (760) 777-7012 Building Permit Application and Tracking Sheet Permit # (�(� ®�� 0 Project Address: 45-280 Seeley Drive Owner's Name: Eisenhower Medical Center A.P.Number: 6.04-094 & 604-040-095 Address: 39000 Bob Hope Drive 2nd & 3rd Floor Tenant ImprovemeLe alDescri Description: City,ST ZiP; Rancho Mirage, CA 92270 Contractor WDL Construction Telephone: 760. 773 . 1273 Address: 74075 El Paseo, Ste B3 Project Description: 2nd & 3rd Floor Tenant City,ST,Zip: Palm Desert, CA 92260 Improvement within a t e ry 7 60. 7 Telephone: 6 4.9553 a r x. 2 ce approx. 9 5 bu i. l d i. n n� 1 2, State Lic. # : 741137 City Lic. #; 4 9 6 6 Arch., Engr., Designer: Boulder Associates Address: 1426 Pearl Street, Ste 300 r' City, ST, Zip: Boulder, CO 80302 Telephone: one. 303.499.7795 - ::• Construction on TY e• BccuPane P y. oStoteLtc.#C-20140 Project type (circle one • New Add'n Alter Repairair Dem Name of Contact Person: James Lenhart Sq. Ft.: 52,812i #Stories: 2 T# units: NSA Telephone # of Contact Person: 3 0 3.. 4 9 9. 7 7 9 5 Estimated Value of Project: $ 4, 2 2 4, 9 6 0. 0 0 APPLICANT: DO NOT WRITE BELOW THIS LINE # Submittal Req'd Recd TRACKING PERMIT FEES Plan Sets Plan Check submitted Item Amount Structural Cales. Reviewed, ready for corrections Plan Check Deposit Truss Cales. Called Contact Person Plan Check Balance Title 24 Cales. Plans picked up Construction Flood plain plan Plans resubmitted Mechanical Grading plan 2n° Review, ready for corrections/issue Electrical Subcontactor List Called Contact Person Plumbing Grant Deed Plans picked up S.M.I. H.O.A. Approval Plans resubmitted Grading IN HOUSE:- '"` Review, ready for corrections/issue Developer Impact Fee Planning Approval Called Contact Person A.I.P.P. Pub. Wks. Appr Date of permit issue School Fees Total Permit Fees APPLICATION ADIDRE .'SsAas By ELECTRICAL SQ. FT. LTV 'CDD .;APPROVAL ENGINEER. APP. VALUATION. sQov wx T CoMrs -AS A A St. -FLOOR nd TOILETS' 2'.. FLOOR R5 BI -DET r.OVERED 1HS OWERS GARAGE BATHTUBS. TYPE CONST Imo, e sl SINKS: OCCUPANCY BAR.'S 11,T -K. A/C. '.'BBQf FIRE. SPRINKLER 14 e-& OVEN OF BEDROOM RANGE FLOOD ZONE.: DRINKING CODE EDITION WASHER ROOF TYPE DRYER WATER HEATER MECHANICALl ROOF DRAINS w FLOOR DRAINS VENT FANS KITCHEN SINK # EXHAUST HOOD ZTEG SINK A/C -<3 TON LALIM.": -,SINK A/C >3 TON FIREPLACE VM TT -Inn ELECTRICAL SQ. FT. LTV 'CDD .;APPROVAL ENGINEER. APP. Water Service 7 Lavatory Bidet 7 Toilet 2 Tub or Shower Sink (kitchen, bar, laundry) Dishwasher Clothes Washer Urinal 9 Floor Drain Floor Sink Drinking Fountain 57 Commercial Sink Roof & Overflow Drain Sq. Ft. of House & Garage Sq. Ft. of Apartments Sq. Ft. of Other Bldgs. Main Service <200 amps Main Service > 200 amps 7 Subpanel Ceiling Fan 3 Exhaust Fan Electric Range/Oven Hood/Fan/Light Combo. Clothes Washer Electric Clothes Dryer Dishwasher Refrigerator Freezer. Ice Maker Trash Compactor Time Clock Exhaust Fan Oven/Range Dryer Vent Evaporative Cooler Evap. Cooler/Duct System Wall/Ceiling Heater FAU/Gravity Furnace <100 BTU FAU/Gravity Furnace >100 BTU Condenser Unit to 3 ton Boiler/Compressor to 3 HP Condenser Unit - 3.5 to 15 ton Boiler/Comp. - 3.5 to 15 HP Condenser Unit -16 to 30 ton Boiler/Compressor -16 to 30 HP City of La Quinta Fixture Count Plumbing Gas Pipe Outlets Water Heater & Vent Lawn Sprinkler 1AVB/15 heads Solenoid Valve Backflow Valve <2" Backflow Valve >2" Spklr. System <50 heads Spklr. System 51 —100 heads Spklr. System >101 heads Septic System (tank & pit) Interceptor (grease, sand, oil) Building Sewer Cesspool, Seepage Pit Electrical Temporary Power Pole Additional Dist. Pole Temporary Lighting System 1 Outlet/Light — first 20 1319 Outlet/Light — 21 & over Electric Sign —1 circuit Electric Sign — Add. Circuits Bussway Footage 3 Motor —to 1 HP Motor — 2 to 10 HP Motor —11 to 50 HP Motor —101 and over Trans/Gen — 2 to 10 KVA Trans/Gen —11 to 50 KVA Trans/Gen — 51 to 100 KVA Trans/Gen —101 KVA & over Piggyback Service Mechanical Condenser Unit — 31-50 ton Boiler/Compressor — 31 to 50 HP Condenser Unit >50 ton Boiler/Compressor >51 HP Air Handling Unit <10M CFM Air Handling Unit >10M CFM Residential Incinerator Commercial Incinerator Commercial Hood Type 1 or 2 Comm. Hood Fire Spklr. System Solar Panel <4x10 Solar Water Piping System Water Control Valve All Other Appliances Tjht 4 4QalN1a P.O. Box 1504 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 To: Greg Butler, Building & Safety Manager BUILDING & SAFETY DEPARTMENT (760) 777-7012 FAX (760) 777-7011 To CDD:September 11, 2008 From: Les Johnson, Director -Planning Due Date: September 22,2008 Permit #: 08-1560 Status: 2nd Review ZXY Building Plans Approval (This is an approval to issue a Building Permit) The Planning Department has reviewed the Building Plans for the following project: Description: Address or General Location: Applicant Contact: T.I. 2nd & 3rd Floor Medical Office 45-280 Seeley Drive James Lenhart (303)499-7795 The Planning Department finds that: ❑ ...these Building Plans do not require Planning Department approval. ® ...these Building Plans are approved by the Planning Department. ❑ ...these Building Plans require corrections. Please forward a copy of the attached corrections to the applicant. When the corrections are made please return them to the Planning Department for review. C( Les Johnson, Director -Planning Date John R. Hawkins Fire Chief Proudly serving the unincorporated areas of Riverside County and the Cities of- Banning f Banning Beaumont Calimesa Canyon Lake 4• Coachella 4. Desert Hot Springs 4. Indian Wells 4. Indio Lake Elsinore 4• La Quinta 4. Moreno Valley 4• Palm Desert Perris 4. Rancho Mirage Rubidoux CSD 4• San Jacinto Temecula Board of Supervisors Bob Buster, District I John Tavaglione, District 2 Jeff Stone, District 3 Roy Wilson, District 4 Marion Ashley, District 5 RIVERSIDE COUNTY FIRE DEPARTMENT In cooperation with the California Department of Forestry and Fire Protection 210 West San Jacinto Avenue • Perris, California 92570 . (951) 940-6900 • Fax (951) 940-6910 September 16, 2008 RE: TENANT IMPROVEMENT PLAN CHECK LAQ-08-TI-048 Eisenhower Ambulatory Care Center Third TI 45-280 Seeley Dr. La. Quinta, CA You have been issued a release for a tenant improvement on an existing building. THIS IS NOT AN OCCUPANCY PERMIT. It is prohibited to use/process or store any materials in this occupancy that would classify it as an "H" occupancy per Sec. 307 of the 20007 UBC. THE FOLLOWING CONDITIONS MUST BE MET PRIOR TO INSPECTION: Install door hardware and exit signs as per Chapter 10 of the 2007 UBC. If this facility has existing supervised automatic fire sprinklers and if sprinklers are relocated / added plans are required and shall be submitted for approval A minimum 2A10BC Fire Extinguisher, (State Fire Marshal Approved) must be mounted in a visible location within 75' walking distance from any point in your. building or suite. Fire extinguishers can be installed by a licensed extinguisher company with a State Fire Marshal service tag attached to the extinguisher, or purchased from a retail store with a sales receipt attached. A licensed fire extinguisher company must service extinguisher yearly. ELECTRICAL PANEL BOX: All breakers must be labeled and a clearance of -36 inches must be maintained around the panel at all times. OTHER REQUIREMENTS: Approved building address shall be placed in such a position to be plainly visible and legible from the street. Said numbers shall contrast with their background. A durable sign stating "This door to remain unlocked during business hours" shall be placed on or adjacent to the front exit door. The sign shall be in letters not less than one inch high on a contrasting background. Provide exit Illumination at all exit discharge locations and exit enclosures (Stairwells). Illumination shall be illuminated at all times the building space served by the means of egress is occupied. Applicant/installer shall be responsible to contact the Fire Department to schedule inspections. -A re -inspection feewillbe required if more than one (1) inspection is necessary. Requests for inspections are to be made at least 72 hours in advance and may be arranged by calling (760) 863-8886. All questions regarding the meaning of these conditions should be referred to the Fire Department Planning & Engineering Staff at (760) 863-8886. Sincerely, By: JStubble Fire Safety Specialist R Ell, El )"'r" V T V 0 LUDO L cn cn r; rTl Ci z c) rTi rn Ct) o Co Z;5 ss— , 111Z t TITLE 24 REPORT Title 24 Report for: Eisenhower Ambulatory Care Center 45-280 Seeley Drive La Quinta, CA Project Designer: Curtis Chong 1426 Pearl Street, Suite 300 Boulder, CO 80302 303.499.7795 , Tr, Report Prepared By: � OCT 7 7� �1� 2008 f Glynnis Cassan JBA Consulting Engineers 3070 Bristol St., Suite 580 Costa Mesa, CA 92626 (714) 751-3354 Date:04 t �� 10/17/2008 The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC - www.energysoft.com. EnergyPro 4.4 by EnergySoft Job Number: 07.0021 User Number: 5678 I TABLE OF CONTENTS I Cover Page Table of Contents Form ENV -1 -C Certificate of Compliance Form ENV -3-C Overall Envelope Method Form ENV -4-C Skylight Fraction of Daylit Area Form LTG -1-C Certificate of Compliance Form LTG -2-C Indoor Lighting Schedule Form LTG -4-C Lighting Controls Credit Worksheet Form LTG -5-C Indoor Lighting Power Allowance Form MECH-1-C Certificate of Compliance Form MECH-2-C Air & Water System Requirements Form MECH-3-C Mechanical Ventilation Form MECH-4-C HVAC Misc. Prescriptive Requirements 4.4 by EnergySoft Job Number: 07.0021 1 2 3 18 93 94 99 106 108 110 112 121 126 User Number: 5678 ICERTIFICATE OF COMPLIANCE (Part 1 of 2) ENVA -C I PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 PROJECT ADDRESS 45-280 Seeley Drive La Quinta Building Permit # PRINCIPAL DESIGNER - ENVELOPE TELEPHONE Curtis Chong 303.499.7795 DOCUMENTATION AUTHOR TELEPHONE Checked by/Date JBA Consulting Engineers (714) 751-3354 Enforcement Agency Use GENERAL INFORMATION DATE OF PLANS BUILDING CONDITIONED FLOOR AREA CLIMATE ZONE 8.22.07 83,806 sy.Ft. 15 BUILDING TYPE 7 NONRESIDENTIAL ❑ HIGH RISE RESIDENTIAL ❑ HOTEL/MOTEL GUEST ROOM ❑ RELOCATABLE- Indicate:❑ Specific Climate -list: or ❑ All Climates PHASE OF CONSTRUCTION 0 NEW CONSTRUCTION ❑ ADDITION ❑ ALTERATION ❑ UNCONDITIONED (File Affidavit) METHOD OF ENVELOPE ❑ COMPONENT(ENV-2-C) ❑X OVERALL ENVELOPE(ENV-3-C) ❑ PERFORMANCE COMPLIANCE STATEMENT OF COMPLIANCE This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations. This certificate applies only to building envelope requirements. The documentation preparer hereby certifies that the document is acc to d com DOCUMENTATION AUTHOR SIGNATURE7; DATE Glynnis Cassan 10.11 - Zo The Principal Envelope Designer hereby certifies that the propose bu' ing esi presented in this set of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this permit application. The proposed building has been designed to meet the envelope requirements contained in Sections 110, 116 through 118, and 140, 142, 143 or 149 of Title 24, Part 6. Please check one: ❑ I hereby affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code to sign this document as the person responsible for its preparation; and that I am licensed in the state of California as a civil engineer or mechanical engineer, or I am a licensed architect. ❑ I affirm that I am eligible under the exemption to Division 3 of the Business and Professions Code by Section 5537.2 or 6737.3 to sign this document as the person responsible for its preparation; and that I am a licensed contractor performing this work. ❑ I affirm that I am eligible under Division 3 of the Business and Professions Code to sign this document because it pertains to a structure or type of work described as exempt pursuant to Business and Professions Code Sections 5537, 5538, and 6737.1. PRINCIPAL ENVELOPE DESIGNER - NAME SIGNATURE DATE LIC. # Curtis Chong ENVELOPE MANDATORY MEASURES Indicate location on plans of Note Block for Mandatory Measures ENVELOPE COMPLIANCE FORMS & WORKSHEETS Check box if worksheet is included For detailed instructions on the use of this and all Energy Efficiency Standards compliance forms, please refer to the Nonresidential Manual published b the California Energy Commission. IRIENV-1-C: Certificate of Compliance. Required on plans for all submittals. Part 2 maybe incorporated in schedules on plans. ❑ENV -2-C: Used Envelope Component compliance method IXIENV-3-C: Used with Overall Envelope Compliance method [KIENV-4-C: Optional. Use for minimum skylight requirements for large enclosed spaces EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:3 of 146 CERTIFICATE OF COMPLIANCE (Part 2 of 2) ENVA -C1 PROJECT NAME DATE Eisenhower Ambulatory Care Center _ 10/17/2008 OPAQUE SURFACES Surface #Type Area U -Fac. Insulation Cay. Cont. Act. Azm. Tilt Con d! Status Joint Appendix IV Reference Location / Comments 1 Roof 130; 0.079 R-30 R-0.0 0 0 New 05-A7 I.T. ROOM 2 Roof 262 0.079 R-30 R-0.0 0 0 New 05-A7 VESTIBULE 3 Wall 34 0.183 R-19 R-0.0 225 90 New 11-A5 VESTIBULE 4 Wall 18 0.183 R-19 R-0.0 315 90 New 11-A5 VESTIBULE 5 Wall 36 0.183 R-19 R-0.0 45 90 New 11-A5 VESTIBULE 6 Wall 32C 0.183 R-19 R-0.0 90 90 New 11-A5 MECHANICAL ROOM 7 Door 50 0.700 None R-0.0 90 90 New 28-A2 MECHANICAL ROOM 8 Wall 385 0.183 R-19 R-0.0 180 90 New 11-A5 SERVICES 9 Wall 1041 0.183 R-19 R-0.0 270 90 New 11-A5 _BLDG. BLDG -.SERVICES 10 Wall 260 0.183 R-19 R-0.0 90 90 New 11-A5 BLDG. SERVICES 11 Wall 384 0.183 R-19 R-0.0 180 90 New 11-A5 BLDG. SERVICES 12 Roof 95 0.079 R-30 R-0.0 0 0 New 05-A7 ELEC. ROOM 13 Wall 260 0.183 R--19 R-0.0 90 90 New 11-A5 BLDG. SERVICES 14 Wall 384 0.183 R-19 R-0.0 180 90 New 11-A5 BLDG. SERVICES 15 Roof 846 0.079 R-30 R-0.0 0 0 New 05-A7 BLDG. SERVICES 16 Wall 112 0.183 R-19 R-0.0 270 90 New 11-A5 1ST FLR. MRI EQT. 17 Wall 941 0.183 R-19 R-0.0 180_ 90 New 11-A5 1ST FLR. MRI EQT. 18 Wall 230 2.183 0.183 R-19 R-0.0 90 90 New 11-A5 1ST FLR. LOUNGE 19 Wall R-19 R-0.0 180 90 New 11-A5 1ST FLR. LOUNGE 20 Roof 15 0.079 R-30 R-0.0 0 0 New 05-A7 1ST FLR. LOUNGE - N, L, A. R (New, txlsting, Alterea, Removed) FENESTRATION SURFACES F More than or equal to 10,000 sq.ft. of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default J -factors from Standards Table 116-A and B. Certificate shall he filed in the rnntrartnr's nroiect nffice durinn nnnstn irfinn and in the K,ildinn mananer's nffice after ennctn intinn # ape Area Act. Cond. U -Fac' SHGC2 Azm_. Stat. Location/ Glazing Type Comments 1 Window Rear (SW) 46 0.300 NFRC 0.36 NFRC 225 New Double Metal Low -E VESTIBULE 2 Window Right (NW) 108 0.300 NFRC 0.36 NFRC 315 New Double Metal Low -E VESTIBULE 3 Window Front (NE) 46 0.300 NFRC 0.36 NFRC 45 New Double Metal Low -E VESTIBULE 4 Window Rear (S) 26 0.300 NFRC 0.36 NFRC 180 New Double MetalLow-E 1ST FLR. LOUNGE 5 Window Rear (S) 26 0.300 NFRC 0.36 NFRC 180 New Double Metal Low -E IST FLR. LOUNGE 6 Window Rear (S) 26 0.300 NFRC 0.36 NFRC 180 New Double Metal Low -E 1ST FLR. LOUNGE 7 Window Rear (S) 26 0.300 NFRC 0.36 NFRC 180 New Double Metal Low -E 1ST FLR. LOUNGE 8 ---- dight Front (N) 15 0.300 NFRC 0.36 NFRC 0 New -------- Double Metal Low -E 1ST FLR. LOBBY 9 Window Rear (S) 26 0.300 NFRC 0.36 NFRC 180 New Double Metal Low -E 1ST FLR. OFFICES 10 Wind ndow Rear (S) 26_0.300 _ NFRC 0.36 NFRC 180 New _ Double Metal Low -E 1ST FLR. OF 11 Window Rear (S) 26 0.300 NFRC 0.36 NFRC 180 New Double Metal Low -E 1ST FLR. MED. AREA 12 Window Rear (S) 26 0.300 NFRC 0.36 NFRC 180New Double Metal Low -E 1ST FLR. MED. AREA 13 Window Right (\W--13 0.300 NFRC 0.36 NFRC 270 _ New Double Metal Low -E IST FLR. LOUNGE (-i) u -Tactor i ype: i -m -A Lterauit i arae from 5tanrlaras, I able Nl-1 Detault I able from the AGM Manual Appendix, NFRC Labeled value. (2) SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING ## Exterior Shade Type _._ SHGC Window H t. Wd. g Overhannnnnnna Left FinRight Fin Dist. _Len. Hgt. Dist. Len. Hgt_-_ Len. H_gt. LExt.RExt. 1 None 0.76 2 None 0._76 3 None _ 0.76 4 _ None 0.76 5 _ 6 None 0.76 7 None 0.7_6 8 -- - None - ----------- 1.00 _ 9 None ----- -- 0.76 - _ - 10 None 0.76 ---------------- - 11 12 -13 None None 0.76 0.76 0.76 _..---- -- None -..------- ----- --- ----- ---- ------ MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES I- I The proposed building is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a ceiling height greater than 15 feet, and an LPD for general lighting of at least 0.5 WIft2. See Section 143(c). If this box is checked, ENV -4-C must be filled out. when submitting under the Prescriptive Compliance Approach. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 4 of 146 CERTIFICATE OF COMPLIANCE (Part 2 of 2) ENV -1 -C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 OPAQUE SURFACES 71 # Surface Type Area U -Fac. Insulation Cay. Cont. Act. Am. Tilt C ond *7 Status Joint Appendix IV Reference Location I Comments 21 Wall 82 0.183 R-19 R-0.0 180 90 New 11-A5 IST FLR. LOUNGE 22 Wall 120 0.183 R-19 R-0.0 90 90 New 11-A5 1ST FLR. LOUNGE 23 Roof 2,793; 0.079 R-30 R-0.0 0 0 New 05-A7 1ST FLR. LOBBY 24 Roof 5 0.079 _ R-30 R-0.0 0 0 New 05-A7 1ST FLR. COOR/RR 25 Wall 145 0.183 R-19 R-0.0 90 90 New 11-A5 IST FLR. COOR/RR 26 Roof 11 0.079 R-30 R-0.01 0 0 New 05-A7 1ST FLR. COOR/RR 27 Wall 60 0.183 R-19 R-0.01 90 90 New 11-A5 1ST FLR. COOR/RR 28 Door 2 0.700 None R-0.0 90 90 New 28-A2 1ST FLR. COOR/RR 29 Wall 58 0.183 R-19 R-0.0 180 90 New 11-A5 1ST FLR. COOR/RR 30 Door 2 0.700 None R-0.0 180 90 New 28-A2 1ST FLR. COOR/RR 31 Wall 5 0.183 R-19 R-0.0 90 90 New 11-A5 1ST FLR. COOR/RR 32 Door 20 0.700 None R-0.0 90 90 New 28-A2 1ST FLR. COOR/RR 33 Door 2C 0.700 None R-0.0 90 90 New 28-A2 IST FLR. COOR/RR 34 Roof 41 0.079 R-30 R-0.01 0 0 New 05-A7 1ST FLR. CO_OR/RR 35 Wall 7 0.1_83 R-19 R-0.0 90 90 New 11-A5 1ST FLR. COOR/RR 36 Door 2 0.700 None R-0.0 90 90 New 28-A2 1ST FLR. COOR/RR 37 Roof 136 0.079 R-30 R-0.0_0 0 New 05-A7 IST FLR. STORAGE 38 Wall 147 0.183 R-19 R-0.0 180 90 New 11-A5 1ST FLR. OFFICES 39 Roof 12 0.079 R-30 R-0.0 0 0 New 05-A7 IST FLR. OFFICES 40 lWall 162 0.183 R-19 R-0.0 90 90 New 11-A5 1ST FLR. OFFICES N. E, A, R (New, Existing, Altered, Removed) FENESTRATION SURFACES More than or equal to 10,000 sq.ft. of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default Ll -factors from Standards Table 116-A and B. Certificate shall be filed in the contractor's project office during construction and in the building managers office after construction # Type Area U -Fac' ---------- - Act. SHGC' Am. - Cond. __Stat. Glazing Type Location/ Comments ---- ---------- 14 Window Left (SE 34 0.300 NFRC 0.36 NFRC 135 New Double Metal Low -E 1ST FLR. COOR/RR 15 Window Front (NE) 78 0.300 NFRC _6361R_FRC 45 New Double Metal Low -E 1ST FLR. COOK/RR 16 Window Right (NW) 34 0.300 NFRC 0.36 INFRC 315_ New Double Metal Low -E 1ST FLR. COOR/RR 17 Window Front (N) 40 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E 1ST FLR. WAITING 18 Window Front (N 40 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E 1ST FLR. WAITING 19 Window Left (E) 40 0.300 NFRC 0.36 NFRC 90 New Double Metal Low -E 1ST FLR. WAITING 20 Window Left (E) 45 0.300 NFRC 0.36 NFRC 90 New Double Metal Low -E IST FLR. MED. AREA 21 Window Rear (S) 45 0.3_00 NFRC 0.36 NFRC 180 New Double Metal Low -E 1ST FLR. MED. AREA 22 Window Rear (S) 92 0.300 NFRC NERC 0.36 - 0.36 NFRC 180 - - - NFRC 270 New - .. New Double Metal Low -E -___.____ ___-- Double Metal Low -E 1ST FLR. MED. AREA ____ 1ST FLR. MED. AREA 23 - - Window Right g (W) 22 --- - 0.300 24 Window Right (W) 45 0.300 NFRC 0 36NFRC 270 New Double Metal Low -E 1ST FLR. MED. AREA 25 Window Rear (S) 22 _63 60 NFRC 0 36 NFRC 180 New Double Metal Low -E 1ST FLR. MED. AREA 26 Window Right (W) 13 0.300 NFRC 0 36 NFRC 270 New Double Metal Low -E 1ST FLR. MED. AREA (1) LI -factor Type: 116-A Default Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value. (2) SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING ## Exterior Shade T __ ---YNe SHGC Window H t. Wd. g Overhang Left_ Fin Right Fin Len. Hgt. LExt.RExt. Dist. Len. H_gt__._._ Dist_Len. Hgt. Won 14 None_ 0.76 15 None - -- 0.76 _ 16 None _01-76- -- 17 None 0.76 18 None 19 None 0.76 _ 20 None 0.76 21 None 0.76 22 None 0.76 23 None 24 None 25 None 26 None 0.76 0.76 0.76 0.76 MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES -I The proposed building is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 1112, a ceiling height greater than 15 feet, and an LPD for general lighting of at least 0.5 W/ft2. See Section 143(c). If this box is checked, ENV -4-C must be filled out. when submitting under the Prescriptive Compliance Approach. Pro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:5 of 146 CERTIFICATE OF COMPLIANCE (Part 2 of 2) ENV-1-C� PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 ES # Surface Type Area U -Fac. Insulation Cay. Cont. Act. Am. Tilt Cond: Status Joint Appendix IV Reference Location / Comments 41 42 Wall Roof 205 1,038 0.183 0.079 R-19 R-30 R-0.0 R-0.0 180 0 90 0 New New 11-A5 05-A7 _ 1ST FLR. MED. AREA 1ST FLR. MED. AREA 43 Wall 15 0.183 R-19 R-0.0 270 90 New 11-A5 IST FLR. LOUNGE 44 Roof 108: 0.079 R-30 R-0.0 0 0 New 05-A7 IST FLR. OFFICES 45 Wall 11 0.183 R-19 R-0.01 270 90 _ New 11-A5 1ST FLR. OFFICES 46 Wall 34 0.183 R-19 R-0.01 135 90 1 New 11-A5 1ST FLR. COOR/RR 47 Wall 73 0.183 R-19 R-0.01 45 90 1 New 11-A5 1ST FLR. COOR/RR 48 Wall 34 0.183 R-19 R-0.0 315 90 New 11-A5 1ST FLR. COOR/RR 49 Wall 513 0.183 R-19 R-0.0 270 90 New 11-A5 1ST FLR. COOR/RR 50 Wall 19 0.183 R-19 R-0.0 0 90 New 11-A5 1ST FLR. COOR/RR 51 Roof_ 60 0.079 R-30 R-0.0 0 0 New 05-A7 1ST FLR. COOR/RR 52 Wall 97 0.183 R-19 R-0.0 270 90 New 11-A5 1ST FLR. COOR/RR 53 Roof 6 0.079 R-30 R-0.0 0 0 New 05-A7 1ST FLR. COOR/RR 54 Wall 97 0.183 R-19 R-0.0 270 90 New 11-A5 IST FLR. COOR/RR 55 Roof 113 0.079 R-30 R-0.0 0 0 New 05-A7 1ST FLR. STORAGE 56 Roof 1,364 0.079 R-30 R-0.0 0 0 New 05-A7 IST FLR. WAITING 57 Wall 1 i 0.183 R-19 R-0.0 45 90 New 11-A5 1ST FLR. WAITING 58 Wall 394 0.183 R-19 R-0.0 0 90 New 11-A5 1ST FLR. WAITING 59 Wall 95 0.183 R-19 R-0.0 90 90 New 11-A5 1ST FLR. WAITING 60 Wall 17 0.183 R-19 R-0.0 90 90 New 11-A5 1ST FLR. MED. AREA - N, t, A. R (New, txlsting, Altered, Removea) FENESTRATION SURFACES More than or equal to 10,000 sq.ft. of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default 1.1 -factors from Ctanrlarrlc Tahlc 11F -A and R r:eAifirofu ehnll M R.A in Iho rnn ror nr a n. , n ..1„ --- ., ,.. ,- - ,., a -„ ,......,�., # Ty_pe Area U -Fac' Act.Cond. Location/ SHGC' Am.Stat. Glazing Type Comments 27 Window Right W) 13-03 00 NFRC 0.36 NFRC 270 New Double Metal Low -E 1ST FLR. MED. AREA 28 Window Right (W) 13 0.300 NFRC 0.36 NFRC 270 New Double Metal Low -E 1ST FLR. MED. AREA 29 Window Right (W) 13 0.300 NFRC 0.36 _ NFRC 270 _ New Double Metal Low -E 1ST FLR. MED. AREA 30 Window Rear (S) -110-3-0-0 NFRC 0.36 NFRC 180 New Double Metal Low -E 2ND FL. CONFRENCE 31 32 Window Rear (S) 11 Window Rear (S) 1 0_.300 V. NFRC NFRC 0.36 0.36 NFRC 180 New Double Metal Low -E 2ND FL. CONFRENCE NFRC_ 180 New Double Metal Low -E 2ND FL. CONFRENCE 33 Window Rear (S) 11 0.300 NFRC 0.36 NFRC 180 New Double Metal Low -E 2ND FL. CONFRENCE 34 Window Left (E) 18 0.300 NFRC 0.36 NFRC 90 New Double Metal Low -E 2ND FL. CONFRENCE 35 36 Window Left (E)_ 18 0.300 --- 0.300 NFRC -- - NFRC 0.36 NFRC 90 New Double Metal Low -E 2ND FL. CONFRENCE -- NFRC 90 New Double Metal Low -E 2ND FL. CONFRENCE Window Left (E) 18 - . -- 0.36 37 Window Rear (S) 21 0.300 NFRC 0.36 NFRC 180 New Double Metal Low_ -E 2ND FL. CONFRENCE 38 ndow Left (E) 69 0.300 NFRC 0.36 NFRC 90 New Double Metal Low -E 2ND FL. CONFRENCE 39 Window Left (E) 69 0.300 NFRC 0.36 NFRC 90 New Double Metal Low -E 2ND FL. CONFRENCE ( 1) u-ractor I ype: i -lo-A ueraua I axle from Jtanaafas, I able NI -1 uerault I able from the AGM Manual Appendix, NFRC Labeled value. (2) SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING Exterior Shade Type SHGC Window Hgt_Wd_ Overhang Left Fin Right Fin_ _Dist. Len Hgt. Len. Hat. _LExt.R_ E_xt, Dist. -Len. Hgt. 27 None 28 None 29 None _0.76 30 None _0.76 0.76 _ 31 None 0.76 32 None 0.76 33 None 0.76 34 None 0.76 _ 35 36 None 0.76 None -b.76- 37 None 0.76--- 36- None 0.76 39 None 0.76 MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES The proposed building is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a ceiling height greater than 15 feet, and an LPD for general lighting of at least 0.5 W/ft2. See Section 143(c). If this box is checked, ENV -4-C must be filled out. when submitting under the Prescriptive Compliance Approach. II EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page.6 of 146 CERTIFICATE OF COMPLIANCE (Part 2 of 2) ENV -1-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 OPAQUE SURFACES Surface #7 Type Area I U -Fac. Insulation Cay. Cont. Act. Azm. Tilt Cond: Status Joint Appendix IV Reference Location / Comments 61 Roof 190 0.079 R-30 R-0.0 0 0 New 05-A7 1ST FLR. MED. AREA 62 Wall 10 0.183 R-19 R-0.0 180 90 New 11-A5 1ST FLR. MED. AREA 63 Roof 454 0.079 R-30 R-0.0 0 0 New 05-A7 IST FLR. MED. AREA 64 Wall 24 0.183 R-19 R-0.0 90 90 New 11-A5 1ST FLR. MED. AREA 65 Wall 28 0.183 R-19 R-0.0 180 90 New 11-A5 1ST FLR. MED. AREA 66 Roof 454 0.079 R-30 R-0.0 0 0 New 05-A7 1ST FLR. MED. AREA 67 Wall 24 0.183 R-19 R-0.0 180 90 New 11-A5 1ST FLR. MED. AREA 68 Wall 264 0.183 R-19 R-0.0 270 90 New 11-A5 1ST FLR. MED. AREA 69 Wall 15 0.183 R-19 R-0.0 270 90 New 11-A5 1ST FLR. MED. AREA 70 Wall 10 0.183 R-19 R-0.0 270 90 New 11-A5 1ST FLR. MED. AREA 71 Wall 3 0.183 R-19 R-0.0 180 90 New 11-A5 1ST FLR. MED. AREA 72 Wall 160 0.183 R-19 R-0.0 0 90 New 11-A5 1ST FLR. MED. AREA 73 Wall 186 0.183 R-19 R-0.0 270 90 New 11-A5 1ST FLR. MED. AREA 74 Wall 8 0.183 R-19 R-0.0 270 90 New 11-A5 1ST FLR. MED. AREA 75 Wall 46 0.183 R-19 R-0.01 270 90 New 11-A5 1ST FLR. MED. AREA 76 Wall 9 0.183 R-19 R-0.01 270 90 New 11-A5 1ST FLR. MED. AREA 77 Door 27 0.700 None R-0.0 270 90 New 28-A2 1ST FLR. MED. AREA 78 Wall 673 0.183 R-19 R-0.0 180 90 New 11-A5 2ND FL. CONFRENCE 79 Wall 527 0.183 R-19 R-0.0 90 90 New 11-A5 2ND FL. CONFRENCE 80 Wall 20 0.183 R-19 R-0.0 180 90 New 11-A5 ND FL. CONFRENCE N, E, A, R (New, Existing, Altered, Removed) FENESTRATION SURFACES - More than or equal to 10,000 sq.ft. of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default U -factors from q- - A. T.hle 11R_G - R r`or1'�firalo elinll L.n filed in tho rnnfrnrtnr'e n nffro rV,�rinn rnneln �rtinn nnrl in the h��ilrVinn m nFFro �ftor rnnc}n iMinn # Type Area U -Fac' SHGC2 Act. Cond. Azm. Stat. Glazing�pe Location/ Comments 40 Window Front (N 69 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E 2ND FL. CONFRENCE 41 Window Front (N) 18 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E 2ND FL. CONFRENCE 42 Window Left (E) 18 -03 -00 -14F -RU 0.36 NFRC 90 New Double Metal Low -E 2ND FL. EX. DEMO - 43 44 -- - Window Right (\A 21 Window Left (E) 21-6366 0.300 NFRC NFRC 0.36 0.36 NFRC NFRC 270 New 90 New -- - Double Metal Low -E Double Metal Low -E 2ND FLR. LOBBY 2ND FLR. LOBBY 45 Window Left 69 0.300 NFRC 0.36 NFRC 90 New Double Metal Low -E 2ND FLR. LOBBY -46- _(_E) Window Front (N) 69 0.300 NFRC 0.36 NFRC 0_New Double Metal Low -E 2ND FLR. LOBBY 47 Window Front (N) 69 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E 2ND FLR. LOBBY 48 Window Front (N) 69 0.300 NFRC 0.36 NFRC 0_ New Double Metal Low -E_ 2ND FLR. LOBBY 49 Window Front (N) 69 0.300 NFRC 0.36 NFRC 0_New Double Metal Low -E 2ND FLR. LOBBY 50 Window Front (N) 18 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E 2ND FLR. LOBBY Front (N) 18 0.300 NFRC 0.36 NFRC 0 New. Double Metal Low -E 2ND FLR. LOBBY kWindow ------------------ Window Rear -(S) 18 - 0.300 - NFRC 0.36 NFRC 180 New Double Metal Low -E 2ND FL. OFFICE (1) u -tactor type: 110-A uetaun I able from Standards, I able NI -1 Uetault I able trom the AGM manual Appendix, NrRc Labeled value. (2) SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING ## Exterior Shade Type SHGC Window Overhang Hgt. Wd. Len. Hgt. LExt.RExt Left -Fin _-. Right Fin --Dist. Len_H-gt. _Dist_Len._Hgt__ 40 None_ 0.76 41 None_ 42 None _0.76_ 0.76 43 None_ 0_76_ _ 44 None 0.76 -45 .._ _....- None - -- 0.76_ - -- 46 None 0.76 47 None 0.76 48 None 0.76 49 None 0.76 50 None 51 None 0.76 0.76 52 None 0.76 MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES The proposed building is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a ceiling height greater than 15 feet, and an LPD for general lighting of at least 0.5 W/ft2. See Section 143(c). If this box is checked, ENV -4-C must be filled out. when submitting under the Prescriptive Compliance Approach. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:7 of 146 CERTIFICATE OF COMPLIANCE (Part2 of 2) ENV -1 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 OPAQUE SURFACES # Surface Type I Area U -Fac. Insulation Cay. Cont. Act. Azm. Tilt Cond: Status Joint Appendix IV Reference Location / Comments 81 Wall 14 0.183 R-19 R-0.0 90 90 New 11-A5 2ND FL. CONFRENCE 82 Wall 14C 0.183 R-19 R-0.0 0 90 55 11-A5 2ND FL. CONFRENCE 83 Wall 174 0.183 R-19 R-0.0 90 90 _New New 11-A5 2ND FL. EX. DEMO 84 Wall 26 0.183 R-19 R-0.0 180 90 New 11-A5 2ND FL. HALL/SUPP. 85 Wall 150 0.183 R-19 R-0.0 0 90 New 11-A5 2ND FL. OFFICE 86 Wall 140 0.183 R-19 R-0.0 90 90 New 11-A5 2ND FL. OFFICE 87 Roof 28 0.079 R-30 R-0.01 0 0 New 05-A7 2ND FLR. RESTROOM 88 Wall 42 0.183 R-19 R-0.0 270 90 New 11-A5 2ND FLR. LOBBY 89 Wall 10 0.183 R-19 R-0.0 90 90 New 11-A5 2ND FLR. LOBBY 90 Wall 572 0.183 R-19 R-0.0 0 90 New 11-A5 2ND FLR. LOBBY 91 Wall 57 0.183 R-19 R-0.0 180 90 New 11-A5 2ND FL. OFFICE 92 Wall 135 0.183 R-19 R-0.0 180 90 New 11-A5 2ND FL. OFFICE 93 Wall 65 0.183 R-19 R-0.0 180 90 New 11-A5 2ND FL. HALL/SUPP. 94 Wall 10 0.183 R-19 R-0.0 180 90 New 11-A5 2ND FL. WAITING 95 Wall 14 0.183 R-19 R-0.0 180 90 New 11-A5 2ND FL. MED. AREA 96 Wall 31$ 0.183 R-19 R-0.0 270 90 New 11-A5 2ND FLR. TEN. SPC. 97 Wall 422 0.183 R-19 _ R-0.0 270 90 New 11-A5 2ND FLR. TEN. SPC. 98 Wall 51 0.183 R-19 R-0.0 180 90 New 11-A5 2ND FLR. TEN. SPC. 99 Wall 34910.183 R-19 R-0.0 270 90 New 11-A5 2ND FLR. TEN. SPC. 100 Wall 1,53 0.183 R-19 R70.0 90 New 11-A5 2ND FLR. TEN. SPC. N, E, A, R (New, Existing, Altered, Removed) FENESTRATION SURFACES More than or equal to 10,000 sq.ft. of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default U -factors from Standards Tahle 116-A and R r:rrtifirate shall ho florl in tho nntmrtnr's nr,i,rt nffira ri-inn r,n,tr.,rtinn and in tha Ndirlinn m nffira after rnnstnirtinn # Type Area _U_ -Fac' SHGC2 Act. Azm. Cond. Stat. GlazingType Location/ Comments 53 Window Rear (S) 18 0.300 NFRC 0.36 NFRC 180 New Double Metal Low -E 2ND FL. OFFICE 54 Window Rear (S) 18 0.300 NFRC 0.36 NFRC 180_ New Double Metal Low -E 2ND FL. WAITING 55 Window Rear (S) 18 0.300 NFRC 0.36 NFRC 180 New Double Metal Low -E 2ND FL. WAITING 56 Window Right (W) 18 0.300 NFRC 0.36 NFRC 270 New Double Metal Low -E 2ND FLR. TEN. SPC. 57 Window Right 18 0.300 NFRC 0.36 NFRC 270 New Double Metal Low -E 2ND FLR. TEN. SPC. 58 Window Rear (S) 18 0.300 NFRC 0.36 NFRC 180 New Double Metal Low -E 2ND FLR. TEN. SPC. 59 Window Rear (S) 18 0.300 NFRC 0.36 NFRC 180 New _ Double Metal Low -E 2ND FLR. TEN. SPC. 60 Window Rear (S) 18 0.300 NFRC 0.36 NFRC 180 New Double Metal Low -E 2ND FLR. TEN. SPC. 61 Window Rear (S) 18 __0.300 0.300 0.300 0.300 _NFRC NFRC NFRC NFRC NFRC 0.36 0.36 0.36 0.36 0.36 NFRC NFRC180_ NFRC NFRC NFRC _ 180 180 270 270 New New New New New Double Metal Low -E -- ... - ----------- Double Metal Low -E Double Metal Low -E Double Metal Low -E Double Metal Low -E 2ND FLR. TEN. SPC. - --- - --- 2ND FLR. TEN. SPC. 2ND FLR. TEN. SPC. 2ND FLR. TEN. SPC. 2ND FLR. TEN. SPC. - 62 63 4 6ndow 65 -- - Window Rear (S) 18 Window Rear (S) 18 Wi Right (W) 180.300 Winight (In)1. dow R 8 (1)u -tactor I ype: I Ib -A Default Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value. (2) SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING ## Exterior Shade Type _ a _- _ _ SHGC _-_ Window H t. Wd. .9 ____Len. Overhang___ Left_ Fin Right Fin Hit. LExt.RE-x_t. _Dist._Len._-Hgt. _Dist. Len.._HHgt 53 None 0._76 _ 54 _None 0.76_ _ 55 None 0.76_ 56 None 0.76 57 None 0.76 _ 58 None 0.76 59 None 0.76_ 60 None 0.76 61 None 0.76 62 None 63 None 64 None 0.76 0.76- 0.76 -------- ---- --- 65 None 0.76 MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES The proposed building is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a ceiling height greater than 15 feet, and an LPD for general lighting of at least 0.5 W1ft2. See Section 143(c). If this box is checked, ENV -4-C must be filled out. when submitting under the Prescriptive Compliance Approach. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:8 of 146 CERTIFICATE OF COMPLIANCE (Part 2 of 2) ENVA-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 OPAQUE SURFACES # Surface Type Area U -Fac. Insulation Cay. Cont. I Act. Azm. Tilt Cond: Joint Appendix IV Reference Location / Comments 101 Wall 588 0.183 R-19 R-0.0 270 90 _Status New 11-A5 2ND FLR. TEN. SPC. 102 Roof 96-0.079 2ND FLR. TEN. SPC. R-30 R-0.0 0 0 New 05-A7 VAV 340 103 Roof 10 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 340 104 Wall 74 0.183 R-19 01 New 270 90 New 11-A5 VAV 339 105 Door 20 0.700 None _R-0.0 R-0.0 270 90 New 28-A2 VAV 339 106 Roof 1,324 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 339 107 Wall 189 0.183 R-19 R-0.01 270 90 New 11-A5 VAV 338 108 Wall 16 0.183 R -19R-0.01 270 New 180 New 180 90 New 11-A5 VAV 338 109 Roof 479 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 338 110 Roof 90 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 337 111 Wall 60 0.183 R-19 R-0.0 270 90 New 11-A5 VAV 337 112 Wall 3 0.183 R-19 R-0.0 270 90 New 11-A5 VAV 337 113 Roof 92 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 337 114 Wall 73 0.183 R-19 R-0.0 270 90 New 11-A5 VAV 337 115 Roof 80 0.079 R-30 R-0.01 0 0 New 05-A7 VAV 337 116 Roof 764, 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 336 117 Wall 154 0.183 R-19 R-0.0 270 90 New 11-A5 VAV 335 118 Roof 289 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 335 119 Wall 74 0.183 R-19 R-0.0 270 90 New 11-A5 VAV 334 120 Door 20 0.700 None R-0.0 270 1 90 New 28-A2 JVAV 334 " N, E, A, R (New, Existing, Altered, Removed) FENESTRATION SURFACES �) More than or equal to 10,000 sq.ft. of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default U -factors from Cfanrf-k T.H. 11 ri-A and R (:prtifira}p shall hp fil-I in the nn}rarfnr ort n irp rinrinn r ncfn irfinn and in the h,,i lrli nn m nffirp affar rnncfri intinn # Type Area U -Fac' _SHGC2 Act. Cond. Azm. Stat. Glazing�pe -Metal Location/ Commen__ts 66 Window Front N 18 0.300 NFRC 0.36 NFRC 0 New Double Low -E 2ND FLR. TEN. SPC. 67 Window Front (N) 18 0.300 NFRC 0.36 NFRC_ 0 New Double Metal Low -E 2ND FLR. TEN. SPC. 68 Window Front (N) 18 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E 2ND FLR. TEN. SPC. -TEN. 69 Window Front (N) 18 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E 2ND FLR. SPC. 70 Window Front (N 18 0.300 NFRC 0.36 NFRC 01 New Double Metal Low -E 2ND FLR. TEN. SPC. 71 Window Front (N) 18 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E 2ND FLR. TEN. SPC. 72 Window Front (N) 18 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E 2ND FLR. TEN. S_PC. 73 Window Front (N) 18 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E 2ND FLR. TEN. SPC. - 74 75 ---- - --- Window Right (W) 18 Window Right 18 -- 0.300 0.300 --- - NFRC 0.36 NFRC 0.36 NFRC NFRC 270 New ------ --------- 270 New - -- Double Metal Low -E -_ - et --- - -- Double Metal_Low-E 2ND FLR. TEN. SPC. - 2ND FLR. TEN. SPC. 76 _g__(W) Window Right (W) 81' Window Rear(S) 124 0.300 0.300 NFRC 0.36 NFRC 0.36 NFRC NFRC 270 New 180 New Double Metal Low -E Double Metal Low -E VAV 338 VAV 338 -- 77 78 Window Right (W) - - 5>DI 0.300 NFRC 0.36 NFRC 270 New Double Metal Low -E -- VAV 337 ( 1 ) U -factor Type: 116-A Default Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value. (2) SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING # Exterior Shade Type SHGC Window Hgt. Wd. Overhang Left Fin -Right Fin_ Dist. Len_Hgt.. Len. _Hat. _L_Ext._RExt._ Dist.._ Len_Hgt.- ISNone_ 0.76 67 None 0._76 68 None 0.76 __ _ 69 None 0.76 70 None 0.76 71 None 0.76 72 None 0.76 73 None 0.76 - 74 .. - None ---------- 0.76 --- - -- - 75 None 0.76 ----- --- -- -------- 76 77 - None - --- --0.76 - 0.76-- - -- -- --- - ---- _. - - --- - _. --- --- ----- -- -------- --- --- ---- - - - - - --------- L7A_j -None----- None. ---- - 0.76 - --------------- ------------------- -- .--- ---------- MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES The proposed building is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a ceiling height greater than 15 feet, and an LPD for general lighting of at least 0.5 WIft2. See Section 143(c). If this box is checked, ENV -4-C must be filled out. when submitting under the Prescriptive Compliance Approach. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:9 of 146 CERTIFICATE OF COMPLIANCE (Part 2 & 2) ENV -1-C PROJECT NAME Eisenhower Ambulatory Care Center Type Area U -Fac' SHGC2 DATE 10/17/2008 OPAQUE SURFACES Glazing Type Location/ Comments 79 Window Right ( 74 0.300 NFRC 0.36 NFRC 2M New Double Metal Low -E VAV 337 80 Window Right (W) 89 0.300 NFRC 0.36 NFRC 270 New Surface # Type Area U -Fac. Insulation Cay. Cont. Act. Am. Tilt Cond: Status i Joint Appendix IV Reference Location / Comments 121 Roof 1 154 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 334 122 Roof 138 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 333 123 Wall 73 0.183 R-19 R-0.0 270 90 New 11-A5 VAV 333 124 Wall 130 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 332 125 Roof 139 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 332 126_ Roof 265 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 332 127 Wall M, 0.183 R-19 R-0.0 270 90 New 11-A5 VAV 332 128 Door 20 0.700 None R-0.0 270 90 New 28-A2 VAV 332 129 Wall 143 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 332 130,Wall 36 0.183 R-19 R-0.0 90 90 New 11-A5 VAV 331 131,Wall 116 0.183 R-19 R-0.01 180 90 New 11-A5 VAV 331 1321Roof 9 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 331 _ 133 Wall 11 0.183 R-19 R-0.0 270 90 New 11-A5 VAV 331 134 Roof 93 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 331 135 Roof 7, 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 330 136 Roof 74 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 330 13_7 Roof 94 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 330 138 Roof 96 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 3_30 139 Roof 9 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 330 140 Roof 96 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 330 N, E, A, R (New, Existing, Altered, Removed) FENESTRATION SURFACES r Morethan or equal to 10,000 sq.ft. of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default U -factors from e��.. -t T-1. 41a_n _ a reti4-1. -11 - _ e 1., a -... ,. ... -- ..... - i., a -Mi....--- �Wi eft.,-Or...fi- # Type Area U -Fac' SHGC2 Act. Am. Cond. Stat. Glazing Type Location/ Comments 79 Window Right ( 74 0.300 NFRC 0.36 NFRC 2M New Double Metal Low -E VAV 337 80 Window Right (W) 89 0.300 NFRC 0.36 NFRC 270 New Double Metal Low -E VAV 337 81 Window Right (W) 219 0.300 NFRC 0.36 NFRC 270 _ New Double Metal Low -E VAV 335 82 Window Right ( 89 0.300 NFRC 0.36 NFRC 270 New Double Metal Low -E VAV 333 83 Rear (S 20 0.300 NFRC 0.36 NFRC 180 New Double Metal Low -E VAV 328 84 _Window Window Rear (S) 20 0.300 NFRC 0.36 NFRC 180 New Double Metal Low -E VAV K8 85 Window (N) 20 0.300 NFRC 0.36 NFRC 0 New Low -E VAV 325 - 86 _Front Window Front (N) 20 0.300 NFRC 0.36 NFRC 0 New _Double_Metal Metal Low -E VAV 325 87 88 Window Front (N) 20 0.300 20 0.300 NFRC 0.36 NFRC 0.36 NFRC NFRC _ 0 0 New _ New _Double Double Metal Low -E VAV 325 Window Front (N) Double Metal Low -E VAV 325 89 Window Rear (S) 20 0.300 NFRC 0.36 NFRC 180 New Double Metal Low -E VAV 321 90 Window Rear (S) 20 0.300 NFRC 0.36 NFRC 180 New Double Metal Low -E VAV 321 91 Window Front (N) 20 0.300INFRCI 0.36 NFRC 0 New Double Metal Low -E VAV 318 (1) U -tactor I ype: 116-A Detault I able from Standards, Table NI -1 Default Table from the AGM Manual Appendix, NFRC Labeled value. (2) SHGC Type: 116-8 Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING ##Exterior _ a _ Shade Type SHGC ______ Window H t. Wd. 9_ _ Overhang Left Fin Right Fin_ Len. Hot. LExt_RExt. Dist. Len. -Hat. _Dist. Len. Hgt- 79 None 0.76 80 None 0.76 81 None 0.76 82 None 0.76 83 None 0.76 84 None 85 None 86 None 87 None 0.76 88 89 90 None 0.76 None 0.76 0.76 None --- -- 91 -- -- --- None .. 0.76 --------- - ---- - - -- - - ---- -- --- - MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES The proposed building is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a ceiling height greater than 16 Teet, ana an LFU Tor general lighting of at least 0.5 WIft2. See Section 143(c). If this box is checked, ENV -4-C must be filled out, when submitting under the Prescriptive Compliance Approach. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 10 of 146 CERTIFICATE OF COMPLIANCE (Part 2 of 2) ENVA-C �7_ ECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 OPAQUE SURFACES # Surface Tie Area U -Fac. Insulation Cay. Cont. Act. Azm. Tilt Cond: Joint Appendix IV Reference Location / Comments 141 Roof 96 0.079 R-30 R-0.0 0 0 _Status New 05-A7 VAV 330 142 Roof 94 0.079 R-30 R-0.0 0 0 NewX05-A7 VAV 317 VAV 330 143 Roof 96 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 329 144 Roof 145 Roof 93 96 0.079 0.079 R-30 R-30 R-0.0 R-0.0 0 0 0 0 1 New New 105-A7 05-A7 VAV 329 VAV 329 146IRoof 96 0.079 R-30 R-0.0 0 0 _ New 05-A7 IVAV 329 147 Roof 95 0.6-79-R-30 VAV 310 R-0.0 0 0 New 05-A7 VAV 329 148 Roof 96 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 329 149 Wall 57, 0.183 R-19 R-0.01 180 90 New 11-A5 VAV 328 150 Roof 86; 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 328 151 Wall 94 0.183 R-19 R-0.0 180 90 New 11-A5 VAV 328 152 Roof 971 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 328 153 Roof 140 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 328 154 Roof 96, 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 327 155 Roof 96 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 327 156 Roof 157 Roof 96_ 96, 0.079 0.079__ R-30 R-30 R-0.0 R-0.0 0 0 0 0 New 05-A7 05-A7 VAV 327 VAV 327 158 Roof 96 0.079 R-30 R-0.0 0 0 __New New 05-A7 VAV 327 159 Roof 9 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 327 160 Roof 96 0.079 R-30 R-0.01 0 0 New 05-A7 VAV 326 N, E, A, R (New, Existing, Altered, Removed) FENESTRATION SURFACES 1-1 More than or equal to 10,000 sq.ft. of site -built fenestration area must include a label certificate either issued by NFRC o, provide a CEC Default Label Certificate using the default LI -factors from I.H. 11. A - o reAf--1. - e i.. a ... - a n( . near rno--firm _# Type Area Act. Cond. U -Fac' SHGC2 Azm. Stat. Glazing Type Location/ Comments 92 Window Front (N) 20 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E VAV 318 93 Window Front (N) 20-6.366 NFRC 0.36 NFRC 0 New Double Metal Low -E VAV 318 94 Window Front (N) 20 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E VAV 317 95 Window (N) 20 0.300 NFRC 0.36 NFRC 0 New Double Met Low -E VAV 317 96 _Front Window Front (N) 20 0.300 NFRC 0.36 FR NC 0 New Double Metal Low -E VAV 317 97 Window Front (N) 181 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E VAV 312 98 Window Front (N) 129 0.30_0 NFRC 0.36 NFRC New Double Metal Low -E VAV 311 99 Window Rear (S) 20 0.300 NFRC 0.36 _0 NFRC 180 New Double Metal Low -E VAV 310 100 101 VUndow Rear (S) 20 0.300 0.300 NFRC 0.36 NFRC 0.36 NFRC _ 180 _ New NFRC 180 Double Metal Low -E - - --_ Double Metal Lo_w-E VAV 310 --_V_31 - --- - ---- -- - --- VUndow Rear (S) 20 VAV_310 102 Window Rear (S) 20 0.300 NFRC 0.36 _New NFRC 180 New Double Metal Low- E VAV 310 103 Window Rear (S) 107 0.300 NFRC 0.36 NFRC 1801 New Double Metal Low -E VAV 309 104 Window Left (E) 69 0.300 NFRC 0.36 NFRC90L_New Double Metal Low -E VAV 309 (1) D -tactor 1 ype: 916-A Detault I able from Standards, Table NI -1 Default Table from the AGM Manual Appendix, NFRC Labeled value. (2) SHGC Type: 116-8 Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING ## Exterior Shade Type - SHGC Window Hgt. Wd. Overhang Left Fin Right fin Dist. Len_HHgt. Len. Hgt LExt.RExt._._ - Dist. Len. H- gt. 92 None 0.76 93 None 94 _ _0.76 0.76 95 _None None 0.76 _ 96 None 0.76 - 97 None 0.76 ----- --------------- 98 None - -0.76 - -- ------ 99 None 0.76 100 None 0.76 101 None 0.76 102 103 104 j None None None 0.76 0.76 0.76 MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES Theproposed building is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a ceiling height greater than 15 feet, and an LPD for general lighting of at least 0.5 WIft2. See Section 143(c). If this box is checked, ENV -4-C must be filled out. when submitting under the Prescriptive Compliance Approach. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 11 of 146 CERTIFICATE OF COMPLIANCE (Part 2 of 2) ENVA-C PROJECT NAME DATE Eisenhower Ambulatory Care Center _ _ _ 10/17/2008 -A OPAQUE SURFACES Surface # Type Area U -Fac. Insulation Act. Cay. Cont. l Azm. Tilt Cond: Status Joint Appendix IV Reference Location / Comments 161 Roof 96 0.079 R-30 R_-0.0 0 0 New 05-A7 VAV 326 162 Roof 96 0.079 R-30 _ R-0.0 0 0 New 05-A7 VAV 326 163 Roof 96 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 326 1641Roof 92 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 326 1651Roof 96 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 326 166 Wall 51 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 325 167Roof 96 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 325 168 Wall 841 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 325 169 Roof 63; 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 325 170 Roof 88 0.079 R-30 R-0.0 0 0 New_ 05-A7 VAV 325 171 Wall 8 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 325 172 Roof 88 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 325 1731Wall 84 0:183_ R-19 R-0.0 0 90 New 11-A5 VAV 325 174 Roof 8 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 325 1751Wall 84 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 325 176 Roof 85 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 325 177 Wall 84 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 325 178 Roof 85 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 324 179 Wall 90 0.183 R-19 R-0.0 180 90 New 11-A5 VAV 324 180 Roof 69 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 324 N, E, A, R (New, Existing, Altered, FMore than or equal to 10,000 sq.ft. of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default U -factors from I Standards Tahle 116-A anti R r- ifiratc shall ha filod in fho rnnfrnr}nr'c -i- Heim Anrinn --r-inn - in the ;lA mnnnn . ffir neer rnneln,rlinn #Type 105 106 Wndow Left (E) window Left (E) Area 20 20 _ U -Fac' SHGC' 0.300 NFRC 0.36 NFRC 0.300 NFRC 0.36 INFRC Act. Azm. 90 90 Cond. Stat. Glazing_Type New Double Metal Low -E New Double Metal Low -E Location/ -Comments VAV 308 VAV 308 107 Window Left (E) 20 0.300 NFRC 0.36 INFRC 90 New Double Metal Low -E VAV 308 108 Window Left (E) 20 0.300 NFRC 0.36 NFRC 90 New Double Metal Low -E VAV 308 109 Window Front (N 206 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E VAV 303 110 Wndow Left (E) 82 0.300 NFRC 0.36 NFRC 90 New Double Metal Low -E VAV 301 111 Window Front (N) 93 0.300 NFRC 0.36_ NFRC 0 New Double Metal Low -E VAV 301 112 Window Left (E) 39 0.300 NFRC 0.36 NFRC 90 New Double Metal Low -E VAV 101 113 Window Left (E) 39 0.300 0.300 NFRC 0.36 NFRC NFRC 0.36 NFRC 90 90 New Double Metal Low -E New Double Metal Low -E VAV 101 114 Window Left _(E)_____29 VAV 102 115 Window Left (E) 39 0.300 NFRC 0.36 NFRC 90 New Double_M_etal Low -E_ VAV 102 116 Window Front (N) 39 0.300 NFRC 0.36 NFRC_ 0 New Double Metal Low -E _ VAV 103 1ndow 17Wi Front (N) 39 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E VAV 103 (1) U -tactor I ype: I lb -A Detault Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value. (2) SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING ## Exterior Shade Type SHGC Window Hgt. Wd. Overhang Left Fin Right Fin _ Dlst.-Len. HHH�t. Len. Hgt. LExt.RExt. -_ Dist. Len._H�t. 105_ None 106 None _0.76 0.76 107 None 0.76 108 --------------- _ None -- 0.76 _ 1 09 110_ None --- 0.76 - --- - - None 0.76 111 None 0.76 112 None 0.76 113 114 115 116 None 0.76 0.13 ---- 0.13 0.76 7.2 4.0 -- 8.9 4.5 Roll -down Awning-_____ ___ Roll -down Awning _ None 28.5 3.0 11.2 5.3 _ --_.... - -- ---- 28.5 3.0 5.2 11.0 ------ ---- -- - - ---- - - 117 None 0.76 MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES Theproposed building is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a ceiling height greater than 15 feet, and an LPD for general lighting of at least 0.5 WIft2. See Section 143(c). If this box is checked, ENV -4-C must be filled out. when submitting under the Prescriptive Compliance Approach. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 12 of 146 CERTIFICATE OF COMPLIANCE (Part 2 of 2) ENV -1-C (PROJECT NAME DATE l Eisenhower Ambulatory Care Center _ 10/17/2008 OPAQUE SURFACES Surface # Type Area I U -Fac. Insulation Cay. Cont. Act. Azm. Tilt Cond: Status Joint Appendix IV Reference Location / Comments 181 Roof 60 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 324 182 Roof 72 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 323 183Roof 96 0.079 R-30 R-0.0 0 1 0 New 05-A7 VAV 323 184 Roof 961 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 323 185 Roof 96 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 323 186 Roof 9 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 322 187 Roof 96, 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 322 188 Roof 96 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 322 189 Wall 9 0.183 R-19 R-0.0 180 90 New 11-A5 VAV 321 190 Roof 9 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 321 191 Wall 8E 83 R-19 R-0.0 180 90 New 11-A5 VAV 321 192 Roof 92 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 321 193 Roof 64 _0.079 R-30 R-0.0 0 0 New 05-A7 VAV 320 194 Roof 64 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 319 195 Roof 83 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 318 196 Wall 84 0.183 R-19 R-0.00 90 New 11-A5 VAV 318 197 Roof 11 4 0.079 R-30 R-0.0_ 0 0 New 05-A7 VAV 318 198 Wall 113 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 318 199 Roof 154 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 318 200 Wall I 16 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 318 Existing, Altered, Removed) LIMore than or equal to 10,000 sq. ft. of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default U -factors from Standards Table 116-A and B. Certificate shall be filed in the contractor's project office during construction and in the building manager's office after construction # Ty_pe # Area _U -Fac' SHGC2 TAct. Azm. Cond. Stat. Glazing Type Right Fin Location/ Comments 118 Wndow Front (N) 39 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E 119 VAV 103 119 Window Front (N) 39 0.300 NFRC 0.36 NFRC 0 New Double Metal Low_ -E VAV 103 120 Window Front (N) 39 0.300 NFRC 0.36 NFRC 0 New Double Metal Low -E VAV 104 121 Window Front (N) 39 0.300 NFRC0.36 NFRC 0 New Double Metal Low -E VAV 104 MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES (1) 1 -1 -factor Type: 116-A Default Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value. (2) SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING # Exterior Shade Type SHGC Window Hgt. Wd. Overhang Left Fin_ Right Fin Len. Hat. L_Ext.RExt. _Dist. Len. Hgt. Dist._Len. Hgt_ 118 None 0.76 119 None 0.76 120 None _ 0.76 121 None 0.76 MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES The proposed building is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a ceiling height greater than 15 feet, and an LPD for general lighting of at least 0.5 WIft2. See Section 143(c). If this box is checked, ENV -4-C must be filled out. when submitting under the Prescriptive Compliance Approach. 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 13 of 146 CERTIFICATE OF COMPLIANCE (Part 2 of 2) ENVA-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 l OPAQUE SURFACES # Surface Type Area U -Fac. Insulation Cay. Cont. Act. Am. Tilt Cond: Status Joint Appendix IV Reference Location / Comments 201 Wall 33 0.183 R-0.0 0 90 New 11-A5 VAV 317 202 Roof 295 0.079 _R-19 R-30 R-0.0 0 0 New 05-A7 VAV 317 203 Roof 45 0.0791 R-30 R-0.0 0 0 New 05-A7 VAV 316 204 Roof 1,98 "' 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 315 205 Roof 1,98 0.079 R-30 R-0.01 0 0 New 05-A7 VAV 314 206 Roof 416' 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 313 207 Wall 27 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 312 208 Roof 316 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 312 209 Wall 193 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 311 210 Roof 45 0.079' R-30 R-0.0 0 0 New 05-A7 VAV 311 211 Roof 50 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 310 212 Roof 80 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 310 213 Wall 84 0.183 R-19 R-0.0 180 90 New 11-A5 VAV 310 214 Roof 80 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 310 215 Wall 84 0.183 R-19 R-0.0 180 90 New 11-A5 VAV 310 216 Wall 84 0.183 R-19 R-0.0 180 90 New 11-A5 VAV 310 217 Roof 80 0.079 R-30 0 0 New 05-A7 VAV 310 218 Roof 11 0.079 R-30 _R-0.0 R-0.0 0 0 New 05-A7 VAV 310 _ 219 Wall 14q 0.183 R-19 R-0.0 180 90 New 11-A5 VAV 310 220 Roof 1 521 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 309 N, E, A, R (New, Existing, Altered, Removed) FENESTRATION SURFACES cyua ,' ,�,vw sy. u. <rl mw-uupt iellCMltlUUll G1CG must Il llalllltl G IGUtlI cel lalGE1C BlU lel IssUBU Uy IVr RV al fJIVVIUtl a IJCI. UCIGUIt LduCl l.Cl Oucate umi iy ulc ama�u �-ia�tv,a u�,u Standards Table 116-A and B. Certificate shall be filed in the contractor's Droiect office durina construction and in the buildina manaaer's office after construction Area I U -Fac' I SHGC2 IAZm.I Stat. IGlazina Tvae I Com (11 ll -factor Tyne116-A Default Tnhla from Rt,md—i, T.H. NI -1 nafa It Tahlc from fhc Ar:AA Anncndw NFRr. I ahalcri vale is (2) SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING Window _ Overhang Left Fin Fight Fin # 'Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt RExt.Dist. Len. H.gt Dist. Len. Hgt. MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES Theproposed building is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a ceiling height greater than 15 feet, and an LPD for general lighting of at least 0.5 W/ft2. See Section 143(c). If this box is checked, ENV -4-C must be filled out. when submitting under the Prescriptive Compliance Approach. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page 14 of 146 CERTIFICATE OF COMPLIANCE (Part 2 of 2) ENV-1-C� PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 OPAQUE SURFACES Surface # pe T Area U -Fac. Insulation Cay. Cont. Act. Azm. Tilt Cond: Status Joint Appendix IV Reference I Location / Comments 221 Wall 621 0.183 R-19 R-0.0 180 90 New 11-A5 VAV 309 222 Wall 17i 0.183 R-19 R-0.0 90 90 New 11-A5 VAV 309 223 Roof 218 0.079 R_-30 R-0.0 0 0 New 05-A7 VAV 309 224 Wall 11 0.183 R-19 R-0.0 90 90 New 11-A5 VAV 308 225 Roof 109 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 308 226 Wall 117 0.183 R-19 R-0.0 90 90 New 11-A5 VAV 308 227 Roof 102 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 308 228 Roof 185 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 308 229 Wall 192 0.183 R-19 R-0.0 90 90 New 11-A5 VAV 308 230,Roof 117 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 307 2311 Roof 84 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 307 2321Roof 10 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 307 233 Roof 84 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 307 234 Roof 106 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 307 235 Roof 270 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 307 236 Roof 237 Roof 46 0.079 466 0.079 R-30 R-30 R-0.0 R-0.0 0 0 0 0 New New 05-A7 05-A7 VAV 306 VAV 306 238 Roof 228 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 306 239 Roof 18 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 306 240 Roof 46 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 306 N, L. A, K (New, Existing, Altered, Removed) LI <yuai ,u ,u,vuu ay.i.. ui a�w-uu�i, ,<ii<a�i a�iuii ai ca uivar i�iuiuuc a iauc� uci riiivare e,�i ....... uy ,vr— ui Standards Table 116-A and B. Certificate shall be filed in the contractor's project office during construction and in the building manager's office after construction Act. Cond. Location/ # Twe Area U -Fac' SHGC2 Azm. Stat. Glazina Tvve Comments (11 ti -factor TVDe: 116-A Default Table from Standards. Tnhle NI -1 Default Tahle frnm tha AC:M Manual AnnendiY NFR(. I ahel-1 —1— (2) SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING Window Overhang Left FinRight Fin ## Exterior Shade HGC Type SH t. Wd. , 9 Len. Hat. _LExt RExt, _Dist. Len.Hat. Dist, Len. Hgt. MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES The proposed building is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 11:2, a ceiling height greater than 15 feet, and an LPD for general lighting of at least 0.5 M2. See Section 143(c). If this box is checked, ENV -4-C must be filled out. when submitting under the Prescriptive Compliance Approach. 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 15 of 146 CERTIFICATE OF COMPLIANCE (Part 2 of 2) ENVA -C PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 OPAQUE SURFACES # Surface e Area U -Fac. Insulation Cay. Cont. Act. Azm. Tilt Cond: Status Joint Appendix IV Reference Location / Comments 241 Roof 96 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 305 242 Roof _ 96; 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 305 243 Roof 96 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 305 244 Roof 1 91 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 305 245 Roof 90 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 305 246 Roof 96 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 305 247 Roof 6 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 305 248 Roof 3E 0.079 R-30 R-0.0 0 0 1 New 05-A7 VAV 304 249 Roof 294 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 304 250 Wall 30 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 303 251 Roof 501 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 303 252 Roof 32 0.079 R-30 R-0.0 0 0 New 05 A7 VAV 302 253 Roof 64 0.079 R-30 R_-0.0 0 0 New 05-A7 VAV 302 254 Wall 12 0.183 R-19 R-0.0 90 90 New 11-A5 VAV 301 255 Wall 14 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 301 256 Roof 32 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 301 257 Roof 2f 0.079 R-30 R-0.0 0 0 New 05-A7 3RD FLR._RR/JAN. 258 Roof 13 0.079 R-30 R-0.0 0 0 New 05-A7 3RD FLR. RR/JAN. 259 Roof 0.079 R-30 R-0.0 0 0 New 05-A7 13RD FLR. RR/JAN. 260 Roof 13 0.079 R-30 R-0.0 0 0 New 05-A7 IVAV 101 N, E, A, R (New, Existing, Altered, Removed) FENESTRATION SURFACES eyua� w w,uuu sy.u. ui sne-uum �enesuauon area must "'ue a iauei cennicare eller i ueu uy rvrrt or Provwe a 1.1 ueiauu �aue1 i,ennmmc umi iy ui. Standards Table 116-A and B. Certificate shall be filed in the contractor's_ project office during constructi_o_n and in the building manager's office after construction �Act�. Cond. Location/ �I # Tvoe Area U -Fac' SHGC` IAzm.l Stat. Glazina Tvne Comments (1) U -factor Type: 116-A Default Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value. (2) SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING Window Overhang Left -F -in Right Fin ## Exterior Shade Type SHGC H t. Wd. _ Yp_ 9Len. Hit. LExt.RExt_Dist. _Len. Hgt. __Dist. _Len. Hat. MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES The proposed building is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a ceiling height greater than 15 feet, and an LPD for general lighting of at least 0.5 WIft2. See Section 143(c). If this box is checked, ENV -4-C must be filled out. when submitting under the Prescriptive Compliance Approach. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 16 of 146 CERTIFICATE OF COMPLIANCE (Part 2 of 2) ENVA -C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 OPAQUE SURFACES #Surface T Area U -Fac. Insulation Cay. Cont. Act. Am. Tilt Cond: Status Joint Appendix IV Reference Location / Comments 261 _pe Wall 98 0.183 R-19 R-0.0 90 90 New 11-A5 VAV 101 262 Roof 50 0.079 R-30 R-0.0 0 New 05-A7 VAV 102 263 Wall 13 0.183 R-19 R-0.0 _0 90 90 New 11-A5 VAV 102 264 Wall 25 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 102 265 Roof 80 0.079 R-30 R-0.0 0 0 _ New 05-A7 VAV 106 266 Roof 129 0.0791 R-30 R-0.0 0 0 New 05-A7 VAV 106 267 Roof 6 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 106 268 Roof 74 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 105 269 Roof 501 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 105 270 Roof 34 0.079 R-30 -R-0.01 0 0 New 05-A7 VAV 108 271 Roof 24, 0.079 R-30 R-0.01 0 New 05-A7 VAV 103 272 Wall 3V 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 103 273 Roof 7(' 0. 079 R-30 R-0.0 0 0 New 05-A7 VAV 104 274 Wall 7 0.183 R-19 R-0.0 0 90 New 11-A5 VAV 104 275 Roof 77 0.079 R-30 R-0.0 0 0 New 05-A7 VAV 107 276 Roof 4 0.079 R-30 R-0.0 0 0 New 05-A7 1ST FLR. RESTROOM N, E, A, R (New, Existing, Altered, More than or equal to 10,000 sq.ft. of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default u -tactors trom Standards Table 116-A and B. Certificate shall be filed in the contractor's project office during construction and in the building manager's office after construction Act. Cond. Location/ # Tv pe Area U -Fac' SHGC2 Azm. Stat. Glazingl_Type Comments tit u -maul ype. - "' 'Ne `-Mawnoaros, i aDie N1- i ueraun i aDie rrom me Aummanual ,Appenaix, rvr KI, Laoeiea value. (2) SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING Window Overhang Left Fin_ Right Fin ## Exterior Shade Type SHGC H t. Wd. Yp. 9Len. Hat. LExt.RExt. _Dist. Len_. H_gt._Dist._Len._Hg, MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES The proposed building is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a ceiling height greater than 15 feet, and an LPD for general lighting of at least 0.5 WIft2. See Section 143(c). If this box is checked, ENV -4-C must be filled out. when submitting under the Prescriptive Compliance Approach. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 17 of 146 OVERALL ENVELOPE METHOD (Part 1 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008l WINDOW AREA CALCULATION A. DISPLAY PERIMETER O I ftx 6 ft = 0 ft2 DISPLAY AREA B. GROSS EXTERIOR WALL AREA 26,133 ft x 0.40 = 10,4531 ft' 40% GROSS WALL AREA C. ENTER LARGER OF A OR B 26,133[::::::=10,453 ftz MAXIMUM STND. AREA D. ENTER PROPOSED WINDOW AREA 4,631 ft� PROPOSED AREA E. WINDOW WALL RATIO = Proposed Window Area Divided by Gross Exterior Wall Area = 17.72% F. WEST DISPLAY PERIMETER O ftx 6 ft = 0 ftZ WEST DISPLAY AREA G. WEST EXTERIOR WALL AREA 6,312 ftx 0.40 = 2525 ft'40% WEST WALL AREA H. ENTER THE LARGER OF F AND G 6,312 2,525 W MAX. STND. WEST AREA 1. ENTER PROPOSED WEST WINDOW AREA 1 ,004 ft2 PROPOSED WEST AREA J. WEST WINDOW WALL RATIO= Proposed West Window Area Divided by West Exterior Wall Area =15.91 Combined Values for North, East and South Walls K. WE/S DISPLAY PERIMETER (A - F) O ft x 6 ft = 0 ftZ WE/S DISPLAY AREA L. WE/S EXTERIOR WALL AREA (B - G) 19,820 ftx 0.40 = 7,928 ft2 40% NIE/S AREA M. ENTER LARGER OF K OR L 19,820 7,928 ftZ MAX. STAND. N/E/S AREA N. PROPOSED N/EIS WINDOW AREA (D -1) 3,626 fe PROPOSED N/E/S AREA WINDOW ADJUSTMENT O. IF D > C and/or if I > H, PROCEED TO CALCULATION STEPS 1 OR 2, AS APPROPRIATE, FOR THE WINDOW AREA ADJUSTMENT. IF NOT, GO TO THE SKYLIGHT AREA TEST, ENV -3-C, PART 2 OF 7. 1. IF I < H: Use the calculated Window adjustment for all walls. MAXIMUM STANDARD PROPOSED WINDOW WINDOW AREA (from C) AREA (from D) ADJUSTMENT FACTOR 2. IF I > H: Calculate one window adjustment factor (WAF) for the West wall. a. Calculate the WAF for the West wall. MAX. STANDARD WEST PROPOSED WEST WEST WINDOW AREA (from H) AREA (from 1) ADJUSTMENT FACTOR _ --------- —1 — I----------------- b. If N > M: Calculate the WAF for the North, East and South walls. MAX. STANDARD N/E/S PROPOSED N/EIS N/E/S WINDOW AREA (from M) AREA (from N) ADJUSTMENT FACTOR GO TO PART 7 TO CALCULATE ADJUSTED AREAS. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:18 of 146 COVERALL ENVELOPE METHOD (Part 2 of 7) ENV -3-C I PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 A. ATRIUM HEIGHT 141 ft GROSS STANDARD ALLOWED ROOF AREA SKYLIGHT AREA B. IF <= 55 FT F34,265 ftZx 0.05 = 1,713 f' C. IF > 55 FT� ftZx 0.10 = ftZ D. PROPOSED SKYLIGHT AREA 1 151 ftZ IF THE PROPOSED SKYLIGHT AREA IS GREATER THAN THE STANDARD SKYLIGHT AREA, PROCEED TO THE NEXT CALCULATION FOR THE SKYLIGHT AREA ADJUSTMENT. IF NOT, GO TO PART 3 OF 7. 1. IF PROPOSED SKYLIGHT AREA >= STANDARD SKYLIGHT AREA: PROPOSED SKYLIGHT AREA SKYLIGHT STANDARD SKYLIGHT AREA (IF E = 0 ENTER 1) ADJUSTMENT FACTOR GO TO PART 7 TO CALCULATE ADJUSTED AREAS. I- EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 19 of 146 OVERALL ENVELOPE METHOD (Part 3 of 7) ENV -3 -Cl JOVERALL ENVELOPE METHOD (Part 3 of 7) ENV -3-C I OVERALL ENVELOPE METHOD (Part 3 of 7) ENV -3-C JOVERALL ENVELOPE METHOD (Part 3 of 7) ENV -3-C I PROJECT NAME DATE A B I C D E F G H ASSEMBLY NAME (e.g. Wall -1, Floor -1) PROPOSED STANDARD AREA HEAT CAP. U- FACT' ACM J.A. IV Ref. UA (B X D) AREA* (Adjusted) U- FACT. UA (F X G) North Wall 160 0.183 11-A5 29.2 160 0.217 34.6 West Wall 186 0.183111-A5 34.0 186 0.217 40.3 Window 13 0.300 3.9 13 0.470 6.1 Window 13 0.300 3.9 13 0.470 6.1 West Wall 86 0.183 11-A5 15.7 86 0.217 18.6 Window 13 0.300 3.9 13 0.470 6.1 West Wall 46 0.183 11-A5 8.5 46 0.217 10.1 Window 131 0.300 3.9 13 0.470 6.1 West Wall 99 0.183 11-A5 18.1 99 0.217 21.5 South Wall 673 0.183 11-A5 123.1 673 0.217 146.0 Window 11 0.300 3.3 11 0.470 5.1 Window 11 0.3001 3.3 11 0.470 5.1 Window 11 0.300 3.3 11 0.470 5.1 Window 11 0.300 3.3 11 0.470 5.1 East Wall 527 0.183 11-A5 96.5 527 0.217 114.4 Window 18 0.300 5.4 18 0.470 1 8.4 Window 18 0.300 5.4 18 0.470 8.4 Window 18 0.300 5.4 18 0.470 8.4 South Wall 20 0.183 11-A5 3.8 20 0.217 4.4 Window 21 0.300 6.3 21 0.470 9.9 East Wall 141 0.183 11-A5 25.8 141 0.217 30.6 Window 69 0.300 20.8 69 0.470 32.6 Window 69 0.300 20.8 69 0.470 32.6 North Wall 140 0.183 11-A5 25.7 140 0.217 30.4 Window 69 0.300 20.8 69 0.470 32.6 Window 18 0.300 5.4 18 0.470 8.4 East Wall 174 0.183 11-A5 31.8 174 0.217 37.7 Window 18 0.300 5.4 18 0.470 8.4 South Wall 26 0.183 11-A5 4.8 26 0.217 5.6 North Wall 11 150 0.183 11-A5 27.41 150 0.217 32.4 1) In climate zones 1 and 16 the insulating R -value of continuous insulation materials installed above the roof waterproof membrane shall be multiplied times 0.8 before choosing the table column for determining assebmly U -factor. See Footnotes, Tables IVA through IVY in the Joint Appendices. If Window and/or Skylight Area Adjustment is Required, use Adjusted Areas from Part 7 of 7. 568 This Page Total Building Total 8,554 7,990 EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:23 of 146 OVERALL ENVELOPE METHOD (Part 3 of 7) ENV -3 -Cl (OVERALL ENVELOPE METHOD (Part 3 of 7) ENV -3-C I OVERALL ENVELOPE METHOD (Part 3 of 7) ENV-3-C OVERALL ENVELOPE METHOD (Part 3 of 7) ENV -3 -Cl OVERALL ENVELOPE METHOD (Part 3 of 7) ENV -3 -Cl OVERALL ENVELOPE METHOD (Part 3 of 7) ENV -3-C OVERALL ENVELOPE METHOD (Part 3 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 OVERALL HEAT LOSS A B C D E F G H ASSEMBLY NAME (e.g. Wall -1, Floor -1) PROPOSED STANDARD AREA HEAT CAP. U- FACT'. ACM J.A. IV Ref. UA (B X D) AREA* (Adjusted) U- FACT. UA (F X G) South Wall 84 0.183 11-A5 15.4 84 0.217 18.3 Window 20 0.300 5.9 20 0.470 9.3 Roof 80 0.079 05-A7 6.3 80 0.051 4.1 South Wall 84 0.183 11-A5 15.4 84 0.217 18.3 Window 20 0.300 5.9 20 0.470 .9.3 South Wall 84 0.183 11-A5 15.4 84 0.217 18.3 Window 20 0.300 5.9 20 0.470 9.3 Roof 80 0.079 05-A7 6.3 80 0.0511 4.1 Roof 1171 0.079105-A7 9.2 117 0.051 6.0 South Wall 146 0.183 11-A5 26.7 146 0.217 31.7 Window 20 0.300 5.9 20 0.470 9.3 Roof 52 0.079 05-A7 4.1 52 0.051 2.6 South Wall 62 0.183111-A5 11.4 62 0.217 13.5 Window 107 0.300 32.0 107 0.470 50.1 East Wall 171 0.183 11-A5 31.3 171 0.217 37.2 Window 69 0.300 20.8 69 0.470 32.6 Roof 218 0.079 05-A7 17.2 218 0.051 11.1 East Wall 117 0.183 11-A5 21.4 117 0.217 25.3 Window 201 0.300 5.9 20 0.470 9.3 Roof 109 0.079 05-A7 8.6 109 0.051 5.6 East Wall 117 0.183 11-A5 21.4 117 0.217 25.3 Window 20 0.300 5.9 20 0.470 9.3 Roof 102 0.079105-A7 8.1 102 0.0511 5.2 Roof 185 0.079 05-A7 14.6 185 0.051 9.4 East Wall 192 0.183 11-A5 35.1 192 0.217 41.6 Window 20 0.300 5.9 20 0.470 9.3 Window 20 0.300 5.9 20 0.4701 9.3 Roof 117 0.079 05-A7 9.3 117 0.051 6.0 Roof 84 0.079 05-A7 6.6 84 0.051 4.3 Roof 107 0.079105-A7 8.5 107 0.051 5.5 1) In climate zones 1 and 16 the insulating R -value of continuous insulation materials installed above the roof waterproof membrane shall be multiplied times 0.8 before choosing the table column for determining assebmly U -factor. See Footnotes, Tables IVA through IVY in the Joint Appendices. If Window and/or Skylight Area Adjustment is Required, use Adjusted Areas from Part 7 of 7. 39s3 This Page Total 450 Building Total 8,554 JI 7,990 - EnergyPro [A by EnergySoft User Number: 5678 Job Number: 07.0021 Page:30 of 146 JOVERALL ENVELOPE METHOD (Part 3 of 7) ENV -3-C I PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 OVERALL HEAT LOSS A B C I D E F G H ASSEMBLY NAME (e.g. Wall -1, Floor-1)AREA PROPOSED STANDARD HEAT CAP. U- FACT' ACM J.A. IV Ref. UA (B X D) AREA* (Adjusted) u- FACT. UA (F X G) Roof 84 0.079 05-A7 6.6 84 0.051 4.3 Roof 106 0.079 05-A7 8.4 106 0.051 5.4 Roof 270 0.079 05-A7 21.3 270 0.051 13.8 Roof 46 0.079 05-A7 3.7 46 0.051 2.4 Roof 46 0.079 05-A7 3.7 46 0.051 2.4 Roof 228 0.079 05-A7 18.0 228 0.051 11.6 Roof 18 0.079 05-A7 1.4 18 0.051 0.9 Roof 460 0.079 05-A7 36.4 460 0.051 23.5 Roof 96 0.079 05-A7 7.6 96 0.051 4.9 Roof 96 0.079 05-A7 7.6 96 0.051 4.9 Roof 96 0.079 05-A7 7.6 96 0.051 4.9 Roof 91 0.079 05-A7 7.2 91 0.051 4.6 Roof 90 0.079 05-A7 7.1 90 0.051 4.6 Roof 96 0.079 05-A7 7.6 96 0.051 4.9 Roof 61 0.079 05-A7 4.8 61 0.051 3.1 Roof 38 0.079 05-A7 3.0 38 0.051 1.9 Roof 294 0.079 05-A7 23.2 294 0.051 15.0 North Wall 309 0.183 11-A5 56.5 309 0.217 67.0 Window 206 0.300 61.8 206 0.470 96.8 Roof 503 0.079 05-A7 39.8 503 0.051 25.7 Roof 32 0.079 05-A7 2.5 32 0.051 1.6 Roof 641 0.079 05-A7 50.6 641 0.051 32.7 East Wall 122 0.183 11-A5 22.4 122 0.217 26.6 Window 82 0.300 24.5 82 0.470 38.4 North Wall 140 0.183 11-A5 25.5 140 0.217 30.3 Window 93 0.300 27.9 93 0.470 43.8 Roof 322 0.079 05-A7 25.5 322 0.0511 16.4 Roof 28 0.079 05-A7 2.2 28 0.051 1.4 Roof 132 0.079 05-A7 10.5 132 0.051 6.7 Roof 133 0.079105-A7 10.5 133 0.051 6.8 1) In climate zones 1 and 16 the insulating R -value of continuous insulation materials installed above the roof waterproof membrane shall be multiplied times 0.8 before choosing the table column for determining assebmly U -factor. See Footnotes, Tables IV.1 through IVY in the Joint Appendices. If Window and/or Skylight Area Adjustment is Required, use Adjusted Areas from Part 7 of 7. 535 This Page Total 507 Building Total [::::8,554 7,990 EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page31 of 146 JOVERALL ENVELOPE METHOD (Part 3 of 7) ENV -3-C JOVERALL ENVELOPE METHOD (Part 4 of 7) ENV -3-C I PROJECT NAME I Eisenhower Ambulatory Care Center 1 DATE 10/17/2008 VERALL HEAT GAIN FROM CONDUCTION A B C I D I E F G H I J ASSEMBLY NAME (e.g. Wall -1, Floor -1) PROPOSED STANDARD AREA TF HEAT CAP. U- FACT. ACM J.A. IV Ref. HEAT GAIN (BxCxE) AREA* (Adjusted) U. FACT. TF HEAT GAIN (GxHxi) Roof 130 55 0.079 05-A7 565 130 0.051 55 365 Roof 262 55 0.079 05-A7 1,137 262 0.051 55 734 S/W Wall 34 55 0.183 11-A5 347 34 0.217 55 412 Window 46 55 0.300 752 46 0.470 55 1,179 N/W Wall 182 55 0.183 11-A5 1,829 182 0.217 55 2,169 Window 108 55 0.300 1,774 108 0.470 55 2,779 N/E Wall 36 55 0.183 11-A5 359 36 0.217 55 425 Window 46 55 0.300 752 46 0.470 55 1,179 East Wall 320 55 0.183 11-A5 3,226 320 0.217 55 3,825 South Wall 385 55 0.183 11-A5 3,873 385 0.217 55 4,593 West Wall 104 55 0.183 11-A5 1,047 104 0.217 55 1,241 East Wall 260 55 0.183 11-A5 2,617 260 0.217 55 3,103 South Wall 384 55 0.183 11-A5 3,860 384 0.217 55 4,577 Roof 95 55 0.079 05-A7 413 95 0.051 55 266 East Wall 260 55 0.183 11-A5 2,617 260 0.217 55 3,103 South Wall 384 55 0.183 11-A5 3,860 384 .0.217 55 4,577 Roof 846 55 0.079 05-A7 3,675 846 0.051 55 2,372 West Wall 112 55 0.183 11-A5 1,131 112 0.217 551,341 South Wall 94 55 0.183 11-A5 949 94 0.217 55 1,125 East Wall 230 55 0.183 11-A5 2,310 230 0.217 55 2,739 South Wall 297 55 0.183 11-A5 2,989 297 0.217 55 3,545 Window 26 55 0.300 421 26 0.470 55 659 Window 26 55 0.300 421 26 0.470 55 659 Roof 156 55 0.079 05-A7 679 156 0.051 55 438 South Wall 82 55 0.183 11-A5 829 82 0.217 55 983 Window 26 55 0.300 421 26 0.470 55 659 Window 26 55 0.300 421 26 0.470 55 659 East Wall 120 55 0.183 11-A5 1,204 120 0.217 55 1,427 Roof 2,793 55 0.079 05-A7 12,135 2,793 0.051 55 7,834 Skylight (Glass w/Curb) 11 15155 0.300 249 15 1.180 55 980 1) In climate zones 1 and 16 the insulating R -value of continuous If Window and/or Skylight Area Adjustment is insulation materials installed above the roof waterproof membrane Required, use Adjusted Areas from Part 6 of 7. 56,861 59,950 shall be multiplied times 0.8 before choosing the table column for Subtotal Subtotal determining assembly U -factor. See footnotes, Tables IV.1 through IV.7 in the Joint Appendices. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 73 of 146 OVERALL ENVELOPE METHOD (Part 4 of 7) ENV -3-C PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 VERALL HEAT GAIN FROM CONDUCTION A B C I D E F G H I J ASSEMBLY NAME (e.g. Wall -1, Floor -1) PROPOSED STANDARD AREA TF HEAT CAP. U- FACT. ACM J.A. IV Ref. HEAT GAIN (BxCxE) AREA* (Adjusted) U- FACT. TF HEAT GAIN (GxHxl) Roof 51 55 0.079 05-A7 222 51 0.051 55 144 East Wall 145 55 0.183 11-A5 1,459 145 0.217 55 1,731 Roof 110 55 0.079, 05-A7 478 110 0.051 55 309 East Wall 60 55 0.183 11-A5 607 60 0.217 55 720 SOUTH WALL 58 55 0.183 11-A5 579 58 0.217 55 686 . EAST WALL 51 55 0.183 11-A5 513 51 0.217 55 609 Roof 417 55 0.079105-A7 1,812 417 0.051 55 1,170 EAST WALL 711 55 0.183 11-A5 715 71 0.217 55 847 Roof 136 55 0.079 05-A7 589 136 0.051 55 380 South Wall 147 55 0.183 11-A5 1,482 147 0.217 55 1,757 Window 26 55 0.300 421 26 0.470 55 659 Window 26 55 0.300 421 26 0.470 55 659 Roof 120 55 0.079105-A7 520 120 0.051 55 335 EAST WALL 162 55 0.183 11-A5 1,636 162 0.217 55 1,939 South Wall 205 55 0.183 11-A5 2,065 205 0.217 55 2,449 Window 26 55 0.300 421 26 0.470 55 .659 Window 26 55 0.3001 421 26 0.470 55 659 Roof 1,038 55 0.079 05-A7 4,510 1,038 0.051 55 2,911 West Wall 158 55 0.183 11-A5 1,591 158 0.217 55 1,887 Window 13 55 0.300 215 13 0.470 55 336 Roof 108 55 0.079105-A7 468 108 0.051 55 302 West Wall 119 55 0.183 11-A5 1,197 119 0.217 55 1,419 S/E Wall 34 55 0.183 11-A5 341 34 0.217 55 404 Window 34 55 0.300 557 34 0.470 55 872 N/E Wall 73 55 0.183 11-A5 733 73 0.217 55 869 Window 78 55 0.300 1,287 78 0.470 55 2,016 N/W Wall 34 55 0.183 11-A5 341 34 0.217 55 404 Window 34 55 0.300 557 34 0.470 55 872 West Wall 513 55 0.183 11-A5 5,166 513 0.217 55 6,126 NorthWall 192 55 0.183 11-A5 1,933 192 0.217 55 2,293 1) In climate zones 1 and 16 the insulating R -value of continuous `If Window and/or Skylight Area Adjustment is insulation materials installed above the roof waterproof membrane Required, use Adjusted Areas from Part 6 of 7. 33,254 36,424 shall be multiplied times 0.8 before choosing the table column for Subtotal Subtotal determining assembly U -factor. See footnotes, Tables IV.1 through IV.7 in the Joint Appendices. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 34 of 146 JOVERALL ENVELOPE METHOD (Part 4 of 7) ENV -3-C I PROJECT NAME � Eisenhower Ambulatory Care Center DATE 10/17/2008 �-VER-ALL HEAT GAIN FROM CONDUCTION A B C D E F G H I J ASSEMBLY NAME (e.g. Wall -1, Floor -1) PROPOSED STANDARD AREA TF HEAT CAP. U- FACT. ACM J.A. IV Ref. HEAT GAIN (BxCxE) (Adjusted) AREA* U- FACT. TF HEAT GAIN (GxHxl) Roof 60 55 0.079 05-A7 262 60 0.051 55 169 West Wall 97 55 0.183 11-A5 973 97 0.217 55 1,154 Roof 60 55 0.079 05-A7 262 60 0.051 55 169 West Wall 97 55 0.183 11-A5 973 97 0.217 55 1,154 Roof 113 55 0.079 05-A7 493 113 0.051 55 318 Roof 1,364 55 0.079 05-A7 5,928 1,364 0.051 55 3,827 N/E Wall 11 55 0.183 11-A5 109 11 0.217 55 129 North Wall 394 55 0.183 11-A5 3,971 394 0.217 55 4,708 Window 40 55 0.300 653 40 0.470 55 1,024 Window 40 55 0.300 653 40 0.470 55 1,024 West Wall 95 55 0.183 11-A5 959 95 0.217 55 1,137 Window 40 55 0.3001 653 40 0.470 55 1,024 East Wall 17 55 0.183 11-A5 168 17 0.217 55 199 Roof South Wall 1901 103 55 55 0.079 0.183 05-A7 11-A5 824 1,037 1901 103 0.051 0.217 55 55 532 1,229 Roof 454 55 0.079 05-A7 1,974 454 0.051 55 1,274 East Wall 241 55 0.183 11-A5 2,426 241 0.217 55 2,876 Window 45 55 0.300 749 45 0.470 55 1,174 South Wall 288 55 0.183 11-A5 2,900 288 0.217 55 3,438 Window 45 55 0.300 749 45 0.470 55 1,174 Roof 454 55 0.079 05-A7 1,974 454 0.051 55 1,274 South Wall 242 55 0.183 11-A5 2,431 242 0.217 55 2,882 Window 92 55 0.300 1,518 92 0.47055 2,378 West Wall 264 55 0.183 11-A5 2,661 264 0.217 55 3,156 Window 22 55 0.300 363 22 0.470 55 569 West Wall West Wall 151 106 55 55 0.183 0.183 11-A5 11-A5 1,518 1,065 151 106 0.217 0.217 55 55 1,800 1,263 Window 45 55 0.300 742 45 0.47055 1,163 South Wall 35 55 0.183 11-A5 355 35 0.217 55 421 Window 22 55 0.300 363 22 0.470 55 569 -- - --- --- --- ---- -- 1) In climate zones 1 and 16 the insulating R -value of continuous *If Window and/or Skylight Area Adjustment is 39,707 43,209 insulation materials installed above the roof waterproof membrane Required, use Adjusted Areas from Part 6 of 7. shall be multiplied times 0.8 before choosing the table column for Subtotal Subtotal determining assembly U -factor. See footnotes, Tables IV.1 through IV.7 in the Joint Appendices. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 35 of 146 OVERALL ENVELOPE METHOD (Part 4 of 7) ENV -3-C PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 VERALL HEAT GAIN FROM CONDUCTION A B C I D E F G H I J ASSEMBLY NAME (e.g. Wall -1, Floor -1) PROPOSED STANDARD AREA TF HEAT CAP. IFACT. Ul- ACM J.A. IV Ref. HEAT GAIN (BxCxE) AREA* (Adjusted) U- FACT. TF HEAT GAIN (GXHXI) North Wall 160, 55 0.183 11-A5 1,605 160 0.217 55 1,904 West Wall 186 55 0.183 11-A5 1,869 186 0.217 55 2,216 Window 13 55 0.300 215 13 0.470 55 336 Window 13 55 0.300 215 13 0.470 55 336 West Wall 86 55 0.183 11-A5 862 86 0.217 55 1,022 Window 13 55 0.300 215 13 0.470 55 336 West Wall 46 55 0.183 11-A5 468 46 0.217 55 555 Window 13 55 0.300 215 13 0.470 55 336 West Wall 99 55 0.183 11-A5 996 99 0.217 55 1,182 South Wall 673 55 0.183 11-A5 6,771 673 0.217 55 8,029 Window 11 55 0.300 180 11 0.470 55 282 Window 11 55 0.300 180 11 0.470 55 282 Window 11 55 0.300 180 11 0.470 55 282 Window 11 55 0.300 180 11 0.470 55 282 East Wall 527 55 0.183 11-A5 5,308 527 0.217 55 6,295 Window 18 55 0.3001 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 South Wall 20 55 0.183 11-A5 206 20 0.217 55 245 Window 21 55 0.3001 348 21 0.470 55 545 East Wall 141 55 0.183 11-A5 1,418 141 0.217 55 1,682 Window 69 55 0.300 1,143 69 0.470 55 1,791 Window 69 55 0.300 1,143 69 0.470 55 1,791 North Wall 140 55 0.183 11-A5 1,412 140 0.217 55 1,674 Window 69 55 0.300 1,143 690.470 55 1,791 Window 18 55 0.300 295 18 0.470 55 463 East Wall 174 55 0.183 11-A5 1,750 174 0.217 55 2,075 Window 18 55 0.300 295 18 0.470 55 463 South Wall 26 55 0.183 11-A5 262 26 0.217 55 310 North Wall 150 55 0.183 11-A5 1,505 150 0.217 55 1,784 1) In climate zones 1 and 16 the insulating R -value of continuous If Window and/or Skylight Area Adjustment is insulation materials installed above the roof waterproof membrane Required, use Adjusted Areas from Part 6 of 7. 31,265 39,676 shall be multiplied times 0.8 before choosing the table column for Subtotal Subtotal determining assembly U -factor. See footnotes, Tables IVA through IV.7 in the Joint Appendices. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 36 of 146 OVERALL ENVELOPE METHOD (Part 4 of 7) ENV -3-C PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 1 VERALL HEAT GAIN FROM CONDUCTION A B C I D I E F G H I J ASSEMBLY NAME (e.g. Wall -1, Floor -1) PROPOSED STANDARD AREA TF HEAT CAP. U- FACT. ACM J.A. IV Ref. HEAT GAIN (BxCxE) AREA* (Adjusted) U- FACT. TF HEAT GAIN (GxHxl) East Wall 140 55 0.18311-A5 1,407 140 0.217 55 1,668 Roof 28 55 0.079 05-A7 120 28 0.051 55 77 West Wall 42 55 0.183 11-A5 420 42 0.217 55 498 Window 21 55 0.300 348 21 0.470 55 545 East Wall 102 55 0.183 11-A5 1,031 102 0.217 55 1,222 Window 21 55 0.300 348 21 0.470 55 545 Window 69 55 0.300 1,143 69 0.470 55 1,791 North Wall 572 55 0.183 11-A5 5,757 572 0.217 55 6,827 Window 69 55 0.300 1,143 69 0.470 55 1,791 Window 69 55 0.300 1,143 69 0.470 55 1,791 Window 69 55 0.300 1,143 69 0.470 55 1,791 Window 69 55 0.300 1,143 69 0.470 55 1,791 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 0.3001 295 18 0.470 55 463 South Wall 57 55 0.183 11-A5 570 57 0.217 55 676 South Wall 135 55 0.183 11-A5 1,360 135 0.217 55 1,613 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 South Wall 65 55 0.183 11-A5 654 65 0.217 55 776 South Wall 107 55 0.183 11-A5 1,079 107 0.217 55 1,279 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 South Wall 143 55 0.183 11-A5 1,439 143 0.217 55 1,707 West Wall 315 55 0.183 11-A5 3,172 315 0.217 55 3,762 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 West Wall 42255 0.183 11-A5 4,252 422 0.217 55 5,043 South Wall 517 55 0.183 11-A5 5,200 517 0.217 55 6,166 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 1) In climate zones 1 and 16 the insulating R -value of continuous"If Window and/or Skylight Area Adjustment is insulation materials installed above the roof waterproof membrane Required, use Adjusted Areas from Part 6 7. 35,828 _ 45,988 shall be multiplied times 0.8 before choosing the table column for Subtotal Subtotal determining assembly U -factor. See footnotes, Tables IVA through IV.7 in the Joint Appendices. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 37 of 146 OVERALL ENVELOPE METHOD (Part 4 of 7) ENV -3-C PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 OVERALL HEAT GAIN FROM CONDUCTION A B C I D I E F G H I J ASSEMBLY NAME (e.g. Wall -1, Floor -1) PROPOSED STANDARD AREA TF HEAT CAP. U- FACT. ACM J.A. IV Ref. HEAT GAIN (BxCxE) AREA (Adjusted) U- FACT. TF HEAT GAIN (GxHxl) Window 18 55 0.300 295 18 0.470 55 463 Window 18155 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 West Wall 349 55 0.183 11-A5 3,515 349 0.217 55 4,168 Window 18 55 1 1 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 North Wall 1,536 55 0.183 11-A5 15,459 1,536 0.217 55 18,331 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 .0.300 295 18 0.470 55 463 West Wall 588 55 0.183 11-A5 5,920 588 0.217 55 7,020 Window 18 55 0.300 295 18 0.470 55 463 Window 18 55 0.300 295 18 0.470 55 463 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 101 55 0.079 05-A7 437 101 0.051 55 282 West Wall 74 55 0.183 11-A5 741 74 0.217 55 878 Roof 1,324 55 0.079 05-A7 5,755 1,324 0.051 55 3,715 West Wall 189 55 0.183 11-A5 1,902 189 0.217 55 2,256 Window 8155 0.300 1,332 810.470 55 2,087 South Wall 162 55 0.183 11-A5 1,636 162 0.217 55 1,939 Window 124 55 0.300 2,038 124 0.470 55 3,192 Roof 479 55 2,081 479 0.05155 1,344 Roof 90 55 ------O-.079-05-A7 0.079 05-A7 390 90 0.051 55 252 West Wall 60 55 0.183 11-A5 609 60 0.217 55 722 1) in climate zones 1 and 16 the insulating R -value of continuous If Window and/or Skylight Area Adjustment is insulation materials installed above the roof waterproof membrane Required, use Adjusted Areas from Part 6 of 7. 46,959 53,860 shall be multiplied times 0.8 before choosing the table column for Subtotal Subtotal determining assembly U -factor. See footnotes, Tables IV.1 through IV.7 in the Joint Appendices. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 38 of 146 OVERALL ENVELOPE METHOD (Part 4 of 7) ENV -3-C PROJECT NAME � Eisenhower Ambulatory Care Center DATE 10/17/2008 VERALL HEAT GAIN FROM CONDUCTION A B C D E F G I H I I I J ASSEMBLY NAME (e.g. Wall -1, Floor -1) PROPOSED STANDARD AREA TF HEAT CAP. U- FACT. ACM J.A. IV Ref. HEAT GAIN (BxCxE) AREA* (Adjusted) U- FACT. TF HEAT GAIN (GxHxl) Window 50 55 0.300 825 50 0.470 55 1,292 West Wall 36 55 0.183 11-A5 367 36 0.217 55 436 Window 74 55 0.300 1,221 74 0.470 55 1,913 Roof 92 55 0.079 05-A7 401 92 0.051 55 259 West Wall 73 55 0.183 11-A5 737 73 0.217 55 874 Window 89 55 0.300 1,473 89 0.470 55 2,308 Roof 80 55 0.079 05-A7 348 80 0.051 55 225 Roof 764 55 0.079 05-A7 3,320 764 0.051 55 2,143 West Wall 154 55 0.183 11-A5 1,549 154 0.217 55 1,836 Window 219 55 0.300 3,618 219 0.470 55 5,668 Roof 289 55 0.079 05-A7 1,255 289 0.051 55 810 West Wall 74 55 0.183 11-A5 741 74 0.217 55 878 Roof 1,154 55 0.079 05-A7 5,016 1,154 0.051 55 3,238 Roof 138 55 0.079 05-A7 599 138 0.051 55 387 West Wall 73 55 0.183 11-A5 737 73 0.217 55 874 Window 89 55 0.300 1,473 89 0.470 55 2,308 North Wall 130 55 0.183 11-A5 1,308 130 0.217 55 1,552 Roof 139 55 0.079 05-A7 605 139 0.051 55 390 Roof 265 55 0.079 05-A7 1,152 265 0.051 55 744 West Wall 302 55 0.183 11-A5 3,037 302 0.217 55 3,601 North Wall 143 55 0.183 11-A5 1,439 143 0.217 55 1,707 East Wall 36 55 0.183 11-A5 360 36 0.217 55 427 South Wall 116 55 0.183 11-A5 1,165 116 0.217 55 1,381 Roof 91 55 0.079 05-A7 396 91 0.051 55 256 South Wall 116 55 0.183 11-A5 1,165 116 0.217 55 1,381 Roof 93 55 0.079 05-A7 405 93 0.051 55 261 Roof 72 55 0.079 05-A7 314 72 0.051-55-- 203 Roof 74 55 0.079 05-A7 319 74 0.051 55 206 Roof 94 55 0.079 05-A7 407 94 0.051 55 263 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 1) In climate zones 1 and 16 the insulating R -value of continuous *If Window and/or Skylight Area Adjustment is insulation materials installed above the roof waterproof membrane Required, use Adjusted Areas from Part 6 of 7, 36,171 38,091 shall be multiplied times 0.8 before choosing the table column for Subtotal Subtotal determining assembly U -factor. See footnotes, Tables IV.1 through IV.7 in the Joint Appendices, EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 39 of 146 OVERALL ENVELOPE METHOD (Part 4 of 7) ENV -3-C PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 VERALL HEAT GAIN FROM CONDUCTION A B C I D I E F G H I J ASSEMBLY NAME (e.g. Wall -1, Floor -1) PROPOSED STANDARD AREA TF HEAT CAP. U- FACT. ACM J.A. IV Ref. HEAT GAIN (BxCxE) AREA* (Adjusted) U- FACT. TF HEAT GAIN (GxHxl) Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 94 55 0.079 05-A7 411 94 0.051 55 265 Roof 96 55 0.079105-A7 418 96 0.051 55 270 Roof 93 55 0.079 05-A7 405 93 0.051 55 261 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 95 55 0.079 05-A7 413 95 0.051 55 266 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 South Wall 57 55 0.183 11-A5 573 57 0.2171 55 679 Window 20 55 0.300 327 20 0.470 55 512 Roof 86 55 0.079 05-A7 374 86 0.051 55 241 South Wall 94 55 0.183 11-A5 946 94 0.217 55 1,121 Window 20 55 0.300 327 20 0.470 55 512 Roof 97 55 0.079 05-A7 421 97 0.051 55 272 Roof 140 55 0.079 05-A7 608 140 0.051 55 393 Roof 95 55 0.079 05-A7 413 95 0.051 55 266 Roof 96 55 0.0791 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 93 55 0.079 05-A7 405 93 0.051 55 261 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 92 55 0.079 05-A7 400 92 0.051 55 258 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 North Wall 51 55 0.183 11-A5 510 51 0.217 55 605 1) In climate zones 1 and 16 the insulating R -value of continuous `If Window and/or Skylight Area Adjustment is insulation materials installed above the roof waterproof membrane Required, use Adjusted Areas from Part 6 of 7. 13,2191 10,232 shall be multiplied times 0.8 before choosing the table column for Subtotal Subtotal determining assembly U -factor. See footnotes, Tables IVA through IV.7 in the Joint Appendices. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:40 of 146 OVERALL ENVELOPE METHOD (Part 4 of 7) ENV -3-C PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 VERALL HEAT GAIN FROM CONDUCTION A B C I D I E 1 J NAME Wall -1, Floor -1) PROPOSEDARDHEATASSEMBLY AREA TF HEAT CAP.FACT. U- ACM J.A. IV Ref. T. =FA TF GAIN(e.g. (GxHxl)Roof 96 55 0.079 05-A7 51 55 270 North Wall 84 55 0.183 11-A5 850 84 0.217 55 1,009 Roof 63 55 0.079 05-A7 272 63 0.051 55 176 Roof 88 55 0.079 05-A7 382 88 0.051 55 247 North Wall 84 55 0.183 11-A5 847 84 0.217 55 .1,005 Window 20 55 0.300 327 20 0.470 55 512 Roof 88 55 0.079 05-A7 382 88 0.051 55 247 North Wall 84 55 0.183 11-A5. 847 84 0.217 55 1,005 Window 20 55 0.300 327 20 0.470 55 512 Roof 86 55 0.079 05-A7 373 86 0.051 55 241 North Wall 84 55 0.183 11-A5 847 84 0.217 55 1,005 Window 20 55 0.300 327 20 0.470 55 512 Roof 85 55 0.079 05-A7 369 85 0.051 55 238 North Wall 84 55 0.183 11-A5 847 84 0.217 55 1,005 Window 20 55 0.300 327 20 0.470 55 512 Roof 85 .55 0.079 05-A7 371 85 0.051 55 240 South Wall 90 55 0.183 11-A5 903 90 0.217 55 1,071 Roof 69 55 0.079 05-A7 300 69 0.051 55 194 Roof 60 55 0.079 05-A7 261 60 0.051 55 168 Roof 72 55 0.079 05-A7 312 72 0.051 55 202 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.05155 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 South Wall 91 55 0.183 11-A5 913 91 0.217 55 1,083 Window 20 55 0.300 327 20 0.470 55 512 Roof 99 55 0.079 05-A7 431 99 0.051 55 278 South Wall 88 55 0.183 11-A5 887 88 0.217 55 1,051 1) In climate zones 1 and 16 the insulating R -value of continuous If Window and/or Skylight Area Adjustment is 14,957 ( 14,911 insulation materials installed above the roof waterproof membrane Required, use Adjusted Areas from Part 6 of 7. -- shall be multiplied times 0.8 before choosing the table column for Subtotal Subtotal determining assembly U -factor. See footnotes, Tables IV.1 through IV.7 in the Joint Appendices. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:41 of 146 OVERALL ENVELOPE METHOD (Part 4 of 7) ENV -3-C PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 VERALL HEAT GAIN FROM CONDUCTION A B C I D E F G H I I J ASSEMBLY NAME (e.g. Wall -1, Floor -1) PROPOSED STANDARD AREA TF HEAT CAP. U- FACT. ACM J.A. IV Ref. HEAT GAIN (BxCxE) AREA* (Adjusted) U- FACT. TF HEAT GAIN (GxHxl) Window 20 55 0.300 327 20 0.470 55 512 Roof 92 55 0.079 05-A7 401 92 0.051 55 259 Roof 641 55 0.079 05-A7 2,785 641 0.051 55 1,798 Roof 641 55 0.079 05-A7 2,785 641 0.051 55 1,798 Roof 83 55 0.079 05-A7 362 83 0.051 55 234 North Wall 84 55 0.183 11-A5 847 84 0.217 55 1,005 Window 20 55 0.300 327 20 0.470 55 512 Roof 114 55 0.079 05-A7 496 114 0.051 55 320 North Wall 113 55 0.183 11-A5 1,135 113 0.217 55 1,346 Window 20 55 0.300 327 20 0.470 55 512 Roof 154 55 0.079 05-A7 669 154 0.051 55 432 North Wall 162 55 0.183 11-A5 1,633 162 0.217 55 1,936 Window 20 55 0.3001 327 20 0.470 55 512 South Wall 337 55 0.183 11-A5 3,393 337 0.217 55 4,023 Window 20 55 0.300 327 20 0.470 55 512 Window 20 55 0.300 327 20 0.470 55 512 Window 20 55 0.300 327 20 0.470 55 512 Roof 295 55 0.079 05-A7 1,284 295 0.05155 829 Roof 452 55 0.079 05-A7 1,965 452 0.051 55 1,268 Roof 1,982 55 0.079 05-A7 8,611 1,982 0.051 55 5,559 Roof 1,982 55 0.079 05-A7 8,611 1,982 0.051 55 5,559 Roof 416 55 0.079 05-A7 1,806 416 0.051 55 1,166 North Wall 271 55 0.183 11-A5 2,728 271 0.217 55 3,235 Window 18155 0.300 2,982 181 0.470 55 4,671 Roof 316 55 0.079 05-A7 1,373 316 0.051 55 886 North Wall 193 55 0.183 11-A5 1,947 193 0.217 55 2,308 Window 129 55 0.300 2,128 129 0.470 55 3,335 Roof 455 55 0.079 05-A7 1,979 455 0.051 55 1,277 Roof 50 55 0.079 05-A7 219 50 0.051 55 142 Roof 80 55 0.079 05-A7 346 80 0.051 55 224 -- -.. — - --- _ - - ----------- ----- 1) In climate zones 1 and 16 the insulating R -value of continuous If Window and/or Skylight Area Adjustment is 1) insulation materials installed above the roof waterproof membrane Required, use Adjusted Areas from Part 6 of 7. �_ 521773 47,193 shall be multiplied times 0.8 before choosing the table column for Subtotal Subtotal determining assembly U -factor. See footnotes, Tables IV.1 through IV.7 in the Joint Appendices, EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 42 of 146 OVERALL ENVELOPE METHOD (Part 4 of 7) ENV -3-C PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 VERALL HEAT GAIN FROM CONDUCTION A B C I D E F G H I J ASSEMBLY NAME (e.g. Wall -1, Floor -1) PROPOSED STANDARD AREA TF HEAT CAP. U- FACT. ACM J.A. IV Ref. HEAT GAIN (BxCxE) AREA* (Adjusted) U- FACT. TF HEAT GAIN (GxHxl) South Wall 84 55 0.183 11-A5 847 84 0.217 55 1,005 Window 20 55 0.300 327 20 0.470 55 512 Roof 80 55 0.079 05-A7 348 80 0.051 55 224 South Wall 84 55 0.183 11-A5 847 84 0.217 55 1,005 Window 20 55 0.3001 327 20 0.470 55 512 South Wall 84 55 0.183 11-A5 847 84 0.217 55 1,005 Window 20 55 0.300 327 20 0.470 55 512 Roof 80 55 0.079 05-A7 348 80 0.051 55 224 Roof 117 55 0.079 05-A7 507 117 0.051 55 327 South Wall 146 55 0.18331 1-A5 1,469 146 0.217 55 1,742 Window 20 55 0.300 327 20 0.470 55 512 Roof 52 55 0.079 05-A7 225 52 0.051 55 145 South Wall 62 55 0.183 11-A5 627 62 0.217 55 744 Window 107 55 0.300 1,761 107 0.470 55 2,758 East Wall 171 55 0.183 11-A5 1,723 171 0.217 55 2,043 Window 691 55 0.300 1,143 69 0.470 55 1,791 Roof 55 0.079 05-A7 947 218 0.05155 611 East Wall ;218 55 0.183 11-A5 1,175 117 0.217 55 1,393 Window 55 0.300 327 20 0.470 55 512 Roof 1091 55 0.079 05-A7 473 109 0.051 55 305 East Wall 117 55 0.183 11-A5 1,175 117 0.217 55 1,393 Window 20 55 0.300 327 20 0.470 55 512 Roof 102 55 0.079 05-A7 444 102 0.051 55 287 Roof 185 55 0.079 05-A7 803 185 0.051 55 518 East Wall 192 55 0.183 11-A5 1,930 192 0.217 55 2,289 Window 20 55 0.300 327 20 0.470 55 512 Window 20 55 0.300 327 20 0.470 55 512 Roof 117 55 0.079 05-A7 509 117 0.051 55 328 Roof 84 55 0.079 05-A7 365 84 0.051 55 235 Roof 107 55 0.079 05-A7 467 107 0.051 55 301 1) In climate zones land 16 the insulating R -value of continuous If Window and/or Skylight Area Adjustment is insulation materials installed above the roof waterproof membrane Required, use Adjusted Areas from Part 6 of 7. 21,594 24,77.1 shall be multiplied times 0.8 before choosing the table column for Subtotal Subtotal determining assembly U -factor. See footnotes, Tables IV.1 through IVY in the Joint Appendices, L EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 43 of 146 OVERALL ENVELOPE METHOD (Part 4 of 7) ENV -3-C PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 VERALL HEAT GAIN FROM CONDUCTION A B C I D E F G H I J ASSEMBLY NAME (e.g. Wall -1, Floor -1) PROPOSED STANDARD AREA TF HEAT CAP. U- FACT. ACM J.A. IV Ref. HEAT GAIN (BxCxE) AREA* (Adjusted) U- FACT. TF HEAT GAIN (GxHxl) Roof 84 55 0.079 05-A7 363 84 0.051 55 234 Roof 106 55 0.079 05-A7 460 106 0.051 55 297 Roof 270 55 0.079 05-A7 1,173 270 0.051 55 757 Roof 46 55 0.079 05-A7 202 46 0.051 55 130 Roof 46 55 0.079 05-A7 202 46 0.051 55 130 Roof 228 55 0.079 05-A7 990 228 0.051 55 639 Roof 18 55 0.079 05-A7 79 18 0.051 55 51 Roof 460 55 0.079 05-A7 2,001 460 0.0511 55 1,292 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 91 55 0.079 05-A7 395 91 0.051 55 255 Roof 901 55 0.079 05-A7 393 90 0.051 55 254 Roof 96 55 0.079 05-A7 418 96 0.051 55 270 Roof 61 55 0.079 05-A7 265 61 0.051 55 171 Roof 38 55 0.079 05-A7 163 38 0.051 55 105 Roof 294 55 0.07905,-A7 1,278 294 0.051 55 825 North Wall 30955 0.183 11-A5 3,108 309 0.217 55 3,686 Window 206 55 0.300 3,399 206 0.470 55 5,325 Roof 503 55 0.079 05-A7 2,187 503 0.051 55 1,412 Roof 32 55 0.079 05-A7 139 32 0.051 55 90 Roof 641 55 0.079 05-A7 2,785 641 0.051 55 1,798 East Wall 122 55 0.183 11-A5 1,232 122 0.217 55 1,461 Window 82 55 0.300 1,348 82 0.470 55 2,112 North Wall 140 55 0.183 11-A5 1,405 140 0.217 55 1,666 Window 93 55 0.300 1,536 93 0.470 55 2,407 Roof 322 55 0.079 05-A7 1,401 322 0.051 55 905 Roof 28 55 0.079 05-A7 120 28 0.051 55 77 Roof 132 55 0.079 05-A7 575 132 0.051 55 371 Roof 133 55 0.079 05-A7 579 133 0.051 55 374 1) In climate zones 1 and 16 the insulating R -value of continuous If Window and/or Skylight Area Adjustment is insulation materials installed above the roof waterproof membrane Required, use Adjusted Areas from Part 6 of 7. 29,451 27,904 shall be multiplied times 0.8 before choosing the table column for Subtotal Subtotal determining assembly U -factor. See footnotes, Tables IV.1 through IVY in the Joint Appendices. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 44 of 146 OVERALL ENVELOPE METHOD (Part 4 of 7) ENV - PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 VERALL HEAT GAIN FROM CONDUCTION A B C I D E F G H I J ASSEMBLY NAME (e.g. Wall -1, Floor -1) PROPOSED STANDARD AREA TF HEAT CAP. U- FACT. ACM J.A. IV Ref. HEAT GAIN (BxCxE) AREA* (Adjusted) U- FACT. TF HEAT GAIN (GxHxl) EAST WALL 98 55 0.183 11-A5 984 98 0.217 55 1,166 Window 39 55 0.300 648 39 0.470 55 1,016 Window 39 55 0.300 648 39 0.470 55 1,016 Roof 502 55 0.079 05-A7 2,180 502 0.051 55 1,407 EAST WALL 131 55 0.183 11-A5 1,321 131 0.217 55 1,566 Drive Thru Window 29 55 0.300 477 29 0.470 55 747 Under Awning Window 39 55 0.300 648 39 0.470 55 1,016 NORTH WALL 258 55 0.183 11-A5 2,598 258 0.217 55 3,080 Roof 801 55 0.079 05-A7 348 80 0.051 55 224 Roof 129 55 0.079 05-A7 559 129 0.051 55 361 Roof 61 55 0.079 05-A7 265 61 0.051 55 171 Roof 74 55 0.079 05-A7 321 74 0.051 55 207 Roof 502 55 0.079 05-A7 2,180 502 0.051 55 1,407 Roof 341 55 0.079 05-A7 1,481 341 0.051 55 956 Roof 242 55 0.079 05-A7 1,050 242 0.051 55 678 NORTH WALL 318 55 0.183 11-A5 3,198 318 0.217 55 3,792 Window 39 55 0.300 648 39 0.470 55 1,016 Window 39 55 0.300 648 39 0.470 55 1,016 Window 39 55 0.300 648 39 0.470 55 1,016 Window 39 55 0.300 648 39 0.470 55 1,016 Roof 76 55 0.079 05-A7 328 76 0.051 55 212 NORTH WALL 71 55 0.183 11-A5 717 71 0.217 55 850 Window 39 55 0.300 648 39 0.470 55 1,016 Window 3955 0.300 648 39 0.470 55 1,016 Roof 778 55 0.079 05-A7 3,379 778 0.051 55 2,181 Roof 42 55 0.079 05-A7 180 42 0.051 55 116 1) In climate zones 1 and 16 the insulating R -value of continuous If Window and/or Skylight Area Adjustment is insulation materials installed above the roof waterproof membrane Required, use Adjusted Areas from Part 6 of 7. 27400 28,266 shall be multiplied times 0.8 before choosing the table column for Subtotal Subtotal determining assembly U -factor. See footnotes, Tables IV,1 through IV.7 in the Joint Appendices. I- EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 45 of 146 (Part 5 of 7) ENV -3-C ;PROJECT NAME DATE _ Eisenhower Ambulatory Care Center 10/17/2008 ROOF ABSORPTANCE CALCULATION R-30 Metal Roof Deck CHECK APPLICABLE BOXES Case 1 - Proposed YES NO 1. CRRC-1 Certified? 2. Is the thermal emittance > 0.75? 3. Enter the initial reflectance pia value: 4. Calculate a -P = 0.94 - 0.7p Ri.P.P Go to 2. Go to 3. X Go to 8. Go to 5. Go to 4. Insert value in calculation. Enter calculated value in Column F below. p Ri,P.P = a P -P = Case 2 - CRRC-1 Tested A f "0- a 0 5. Enter initial reflectance & emittance values from CRRC-1 6. Calculate pRi.P,PP = - 0.448 + 1.121 p im+ 0.524 E "n 7. Calculate a P-= 0.94 - 0.7p Rt. p,., D Emi, = Go to 6. Insert values in calculation. Go to 7. Insert value in calculation. Enter calculated value in Column F below. p i"it = p Ri.p,Pp = a P,"P = 8. Not CRRC-1 Tested K For nonresidential low -sloped roofs: For all other roofs: a pr, = 0.87 Enter default value in Column F below. a p, = 0.73 Enter default value in Column F below. Standard absorptance values for Column J are either ASSEMBLY NAME For nonresidential low -sloped roofs: For all other roofs: a sId = 0.45 Enter standard value in Column J below. a.d = 0.73 Enter standard value in Column J below. OVERALL HEAT GAIN FROM RADIATION OPAQUE SURFACES A f "0- a 0 B C D E F G H �J K PROPOSED STANDARD ASSEMBLY NAME U. HEAT GAIN AREA" HEAT GAIN (e.g. Roof -1) 0. AREA SF WF FACTOR Absorp (BxCxDxExF) (ADJUSTED) U -Factor Absorp (CxDxHxlxJ) Roof X 130 123 0.92 0.079 0.87 1,011 130 0_051 0.45 338 Roof ___2_62__12_3 0.92__O. 07__87 x.035 _262 _0-_051-0-45 --680- Roof X 95 123 0.92 0.079 0.87 739 95 0.051 0.45 247 Roof _ X 846 123 0.92 0.079 0.87 6,578 846 0.051 0.45 2,197 Roof X 156 123 0.92 0.079 0.87 1,216 156 0.051 0.45 406 Roof X 2,793 123 0.92 0 079 0.87 21_,721 ------2-793 0.051 0.45 7.253 Roof X 51 123 0.92 0.079 0.87 398 51 0.051 0.45 133 Roof -X_ __-110 123 0.92_ 0.079 0.87 856- 1.100.051 0.45 286. Roof __. X 417 123 0.92 _0:079 0.87 -._ 3,243 _ -417 0.051 0.45 1,083- Roof----__- _------------X_-_---136 123 0.92-.__ 0.079__ 0.87 1,054136--__0.051---- ___0.45--__-----_-352 Roof X 120 123 0.92 0.079 0.87 930 1201''0.051 0.45 311 39,78 Subtotals are entered under "Subtotal" _ 13,2841 SUBTOTAL in COLUMNS I and M of ENV -3-C, Part SUBTOTAL 6of7. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number. 07.0021 Page: 46 of 146 (Part 5 of 7) ENV -3-C �PROJECT NAME DATE ___ Eisenhower Ambulatory Care Center 10/17/2008 _ ROOF ABSORPTANCE CALCULATION OPAQUE SURFACES CHECK APPLICABLE BOXES Case 1 - Proposed YES NO 1. CRRC-1 Certified? 2. Is the thermal emittance > 0.75? 3. Enter the initial reflectance p im value: 4. Calculate a P -P = 0.94 - 0.7 p Ri. p1p Go to 2. Go to 3. Go to 8. Go to 5. Go to 4. Insert value in calculation. Enter calculated value in Column F below. p Ri,P11P = a P- = Case 2 - CRRC-1 Tested A 5. Enter initial reflectance & emittance values from CRRC-1 6. Calculate pR,.p.Pp = - 0.448 + 1.121 p mit+ 0.524 E mit 7. Calculate a P- = 0.94 - 0.7 p Ri,PI.P B C E,„ = Go to 6. Insert values in calculation. Go to 7. Insert value in calculation. Enter calculated value in Column F below. P iPd = p R,.pl, = a P.P = 8. Not CRRC-1 Tested I For nonresidential low -sloped roofs: For all other roofs: a wPp = 0.87 Enter default value in Column F below. a PAPP = 0.73 Enter default value in Column F below. Standard absorptance values for Column J are either _ _J STANDARD For nonresidential low -sloped roofs: For all other roofs: a .d = 0.45 Enter standard value in Column J below. a:m = 0.73 Enter standard value in Column J below. OVERALL HEAT GAIN FROM RADIATION OPAQUE SURFACES A $ .0 o B C D E F G H I K _ PROPOSED _ _J STANDARD ASSEMBLY NAME (e.g. Roof -1) AREA SF WF U- FACTOR Absorp HEAT GAIN (BxCxDxExF) AREA' (ADJUSTED) U -Factor Absorp HEAT GAIN (CxDxHxlxJ) Roof X 1 038 123 0.92 0.079 0.87 8,072 1 038 0.051 0.45 2,695 oof - 108 60 123 123 0.92 0_,_o 0� 83 108 0.05,_--0-45- Roof X 0.92 0.079 0.87 470 60 0.051 0.45 157 Roof X 60 123 0.92 0.079 0.87 470 60 0.051 0.45 157 Roof X 113 123_. 0.92 0.079 0.87 882 113 0.051 0.45 295_ _ Roof _X____ 1 364 12_3 0.92 _0,079 0.87 10,612 1 364 0_051 0.45 3,543. Roof X 190 123 0.92 0.079 _ 0.87 1 475 190 0051 0.45 492_ Roof Roof _,-__-- __- Roof.--_-_-_- _---------.--__- Roof -X454 X X- X _1230.92 -. 454 123 _ _-_-- 28.123. 96 123 _ 0.92 0.92_-_ 0.92 0.079_ 0.079 _ 0.079__ 0.079 0.873,53.3_ 0.87 0.87. 0.87 __3,533 _-_-215 749 30,84 SUBTOTAL 454_ 0.051 _._0.45_ 454 _ 0.051 _ 0:45 -_ _----_- _281-_0.051 96 0.051 11 1 0.45 Subtotals are entered under "Subtotal" in COLUMNS I and M of ENV -3-C, Part 6of7. 1,1.80 1,180 _72 250 F-10,3001 SUBTOTAL EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 47 of 146 (Part 5 of 7) ENV -3-C PROJECT NAME (DATE Eisenhower Ambulatory Care Center ( 10/17/2008 ROOF ABSORPTANCE CALCULATION OPAQUE SURFACES CHECK APPLICABLE BOXES Case 1 - Proposed YES NO 1. CRRC-1 Certified? 2. Is the thermal emittance > 0.75? 3. Enter the initial reflectance p+", value: 4. Calculate a P, -P = 0.94 - 0.7 p R.p,.p Go to 2. Go to 3. Go to 8. Go to 5. Go to 4. Insert value in calculation. Enter calculated value in Column F below. p RI.P,.p = a POP = Case 2 - CRRC-1 Tested a 0 5. Enter initial reflectance & emittance values from CRRC-1 6. Calculate p R,,Prpp = - 0.448 + 1.121 p nt + 0.524 E "„ 7. Calculate a Prop = 0.94 - 0.7p Ri.p.p E E = Go to 6. Insert values in calculation. Go to 7. Insert value in calculation. Enter calculated value in Column F below. p mi, = p Ri. pwp = a P -P = J 8. Not CRRC-1 Tested i0T PROPOSED For nonresidential low -sloped roofs: For all other roofs: a P -P = 0.87 Enter default value in Column F below. a P,.p = 0.73 Enter default value in Column F below. Standard absorptance values for Column J are either For nonresidential low -sloped roofs: For all other roofs: a- = 0.45 Enter standard value in Column J below. a:,d = 0.73 Enter standard value in Column J below. OVERALL HEAT GAIN FROM RADIATION OPAQUE SURFACES AC a 0 D E F G H �1 J K i0T PROPOSED STANDARD ASSEMBLY NAME U- HEAT GAIN AREA` HEAT GAIN (e.g. Roof -1) O N AREA SF WF FACTOR Absorp (BxCxDxExF) (ADJUSTED) U -Factor Absorp (CxDxHxlxJ) Roof X 101 123 0.92 0.079 0.87 782 101 0.051 0.45 261 Roof x324__123 0.92 .979 0 8L _1_0,., 3_0j, 3,725 1,324 --0-0-5t- -0.4 440 Roof X 479 123 0.92 0.079 0.87 479 0.051 0.45 1,244 Roof _ X 90 123 0.92 0.079 0.87 698 90 0.051 0.45 233 Roof X 92 123 0.92 0.079 0.87 719 92 0.051 0.45 240_ Roof _ X 80 123 0.92 0.079 0.87 624 80_0_051 0.4.5 _ 208_ Roof _ _-_ X 764 123 _ 0.92 0.079 0.87 _ 5,942764 _0.051 _0.45 1,984 Roof X289 123 _ 0.920.079 _ 0_87 -------- 2,247-_ ----- __ 2890.05_1 0._45 _ 750- Roof ------ __X__ 1,154 _123_ 0.92 0,079 _ 0.87 8,979 ___1,154_ 0.051_ _0.45 2,998_ Roof __--------_-..----_-_-__ _ _X- 138 123_ 0.92 0.079 -_0.87_- _--- 1,073_ -- - 1380.0510.45_.._----____--_ 358 Roof _____ ___.__. _ -_. X_ 139 123 0.92_ _0.079_ 0.87_ 1,083 139___ 0.051__ 0.45___ -____362 36,1721 Subtotals are entered under "Subtotal" 12,078 SUBTOTAL in COLUMNS I and M of ENV -3-C, Part SUBTOTAL 6of7. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:48 of 146 (Part 5 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 ROOF ABSORPTANCE CALCULATION OPAQUE SURFACES CHECK APPLICABLE BOXES Case 1 - Proposed YES NO 1. CRRC-1 Certified? 2. Is the thermal emittance > 0.75? 3. Enter the initial reflectance p in,t value: 4. Calculate a Po, = 0.94 - 0.7 p Rl,,r., Go to 2. Go to 3. Go to 8. Go to 5. Go to 4. Insert value in calculation. Enter calculated value in Column F below. p m. Po, = a P -P = Case 2 - CRRC-1 Tested ��, c ��°, N B C S. Enter initial reflectance & emittance values from CRRC-1 6. Calculate pR.,,o, _ - 0.448 + 1.121 p �, + 0.524 Emil 7. Calculate a PAPP = 0.94 - 0.7 p Ri. p.p E in,t = Go to 6. Insert values in calculation. Go to 7. Insert value in calculation. Enter calculated value in Column F below. p nt p R.P,PP = a PP, = 8. Not CRRC-1 Tested PROPOSED For nonresidential low -sloped roofs: For all other roofs: a P,PP = 0.87 Enter default value in Column F below. a P, = 0.73 Enter default value in Column F below. Standard absorptance values for Column J are either AREA SF For nonresidential low -sloped roofs: For all other roofs: a :id = 0.45 Enter standard value in Column J below. a sed = 0.73 Enter standard value in Column J below. OVERALL HEAT GAIN FROM RADIATION OPAQUE SURFACES A ��, c ��°, N B C D E F G H J K PROPOSED _I __T STANDARD ASSEMBLY NAME (e.g. Roof -1) AREA SF WF U- FACTOR Absorp HEAT GAIN (BxCxDxExF) AREA* (ADJUSTED) U -Factor Absorp HEAT GAIN (CxDxHxlxJ) Roof X 265 123 0.92 0.079 0.87 __2,9_Q2_265 0.051 0.45 688 Root -5__. 9 -,L23 0.92 ,079 -0--87-- 70991 ,05 -0 45 _ 23 Roof X 93 123 0.92 0.079 0.87 725 93 0.051 0.45 242 Roof X 72 123 0.92 0.079 0.87 562 72 0.051 0.45 188 Roof X 74 123 0.92 0.079 1 0.87 572 74 0.051 0.45 191 Roof X 94 123 0.92 0.079 0,87 729 94 0.45 243 Roof X 123 0.079 0.87 748 _ 960.051 _0.051 0.45 _ 250 Roof Roof _ Roof Roof _ X_ X _X------ X _._96 96 123 96.123 96 123_ 94 123 _0.92 _0.92 _0_92 0.92.___ 0.92 0.079_ 0.07.9 0.079 0.079 _ 0,_87 0._87_. 0.87 0.87 _._748 _ 96 _ 0.051 0.45_-- 748_ 961_._0.051 0.45_ 748 96 0.051___0.45__ 735 94 0.051 0.45 9,086 Subtotals are entered under "Subtotal" SUBTOTAL in COLUMNS I and M of ENV -3-C, Part 6of7. 250_ 250 250 245 __.-3,034 SUBTOTAL EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 49 of 146 (Part 5 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulates Care Center 10/17/2008 ROOF ABSORPTANCE CALCULATION OPAQUE SURFACES CHECK APPLICABLE BOXES Case 1 - Proposed YES NO 1. CRRC-1 Certified? 2. Is the thermal emittance > 0.75? 3. Enter the initial reflectance p " d value: 4. Calculate a,., = 0.94 - 0.7 p R.P,oP Go to 2. Go to 3. Go to 8. Go to S. Go to 4. Insert value in calculation. Enter calculated value in Column F below. p R, Plop = a,oP, = Case 2 - CRRC-1 Tested _�, c „ B CD 5. Enter initial reflectance & emittance values from CRRC-1 6. Calculate PKPIP = - 0.448 + 1.121 p i.it+ 0.524 E " 7. Calculate a-= 0.94 - 0.7 p RI.P,PP E E.Pd = Go to 6. Insert values in calculation. Go to 7. Insert value in calculation. Enter calculated value in Column F below. p im = p Ri.P,op = a Plop = 8. Not CRRC-1 Tested PROPOSED For nonresidential low -sloped roofs: For all other roofs: a Plop = 0.87 Enter default value in Column F below. a Plop = 0.73 Enter default value in Column F below. Standard absorptance values for Column J are either AREA SF For nonresidential low -sloped roofs: For all other roofs: a.d = _ 0.45 Enter standard value in Column J below. a Md = 0.73 Enter standard value in Column J below. OVERALL HEAT GAIN FROM RADIATION OPAQUE SURFACES A _�, c „ B CD E F G H I J K PROPOSED -STANDARD ASSEMBLY NAME (e.g. Roof -1)o AREA SF WF U- FACTOR Absorp HEAT GAIN (BxCxDxExF) AREA` (ADJUSTED) U -Factor AbSOrp HEAT GAIN (CxDxHxlxJ) Roof X 96 123 0.92 0.079 0.87 748 96 0.051 0.45 250 Roof --X----9a-1-2-3 0.92 0� 0� 729 _ 93 -9.95 .0.45 42 Roof X 96 123 0.92 0.079 0.87 748 96 0.051 0.45 250 Roof X 96 123 0.92 0.079 0.87 748 96 0.051 0.45 250 Roof X 95 123 0.92 0.079 0.87 739 95 0.051 0.45 247 Roof X_ 96 123 0_92 0.079 0_.87 96 0.051 0_45 250 Roof X 86 123 0.92 0.079 0.87 -_7.48.. 669 86 0.051 0.45 _ 223 Roof Roof ---_-___- Roof,---,-,-- __X _ X X __-- 97 1.23 140.1.2.3 -_96 123__ 0.92 _ 0.92 0.92 0.079 --0.079 0.079--- _ 0.87 _-0.87 0.87 _ 754 97 0.051 _0.45__. ---- 1,089.._. 140_0.051 -_0.45 95---0.051 - - 0.45l---- 748 - - _ _ 960.051 _ _ 0.45 8,456 Subtotals are entered under "Subtotal" SUBTOTAL in COLUMNS I and M of ENV -3-C, Part 6of7. 252 ------364_ -- -247- 250 2,823 SUBTOTAL EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 50 of 146 (Part 5 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 ROOF ABSORPTANCE CALCULATION OPAQUE SURFACES I CHECK APPLICABLE BOXES Case 1 - Proposed YES NO 1. CRRC-1 Certified? 2. Is the thermal emittance > 0.75? 3. Enter the initial reflectance p mi, value: 4. Calculate apr., = 0.94 - 0.7 p Ri.p, Go to 2. Go to 3. Go to 8. Go to S. Go to 4. Insert value in calculation. Enter calculated value in Column F below. p Ri.P.P = a P -P = Case 2 - CRRC-1 Tested Af 5. Enter initial reflectance & emittance values from CRRC-1 6. Calculate pR.P.PP = - 0.448 + 1.121 p,nd+ 0.524 Eind 7. Calculate a P, -P = 0.94 - 0.7 p R.p.p B ( Emd = Go to 6. Insert values in calculation. Go to 7. Insert value in calculation. Enter calculated value in Column F below. p nt = p R..p,PP = a POP = H 8. Not CRRC-1 Tested J K For nonresidential low -sloped roofs: For all other roofs: a P- = 0.87 Enter default value in Column F below. �ap-p = 0.73 Enter default value in Column F below. Standard absorptance values for ColumnJ are either ASSEMBLY NAME (e.g. Roof -1) For nonresidential low -sloped roofs: For all other roofs: a sm = 0.45 Enter standard value in Column J below. a std = 0.73 Enter standard value in Column J below. OVERALL HEAT GAIN FROM RADIATION OPAQUE SURFACES Af c 0 o N B ( D E F G H I J K PROPOSED STANDARD ASSEMBLY NAME (e.g. Roof -1) AREA SF WF _ U- FACTOR Absorp HEAT GAIN (BxCxDxExF) AREA" (ADJUSTED) U -Factor Absorp HEAT GAIN (CxDxHxlxJ) Roof X 96 123 0.92 0.079 0.87 748 96 0,051 0.45 250 Ro9f 96 123 0.92 __-0,07 _87 748 96 0.051_ 145- 50_ Roof X 96 1230.92 0.079 0.87 748 96 0.051 0.45 250 Roof X 93 123 0.92 0.079 0.87 725 93 0.051 0.45 242 Roof _ X 96. 123 0_92 0.079 0.87 748 96 0.051 0.45 250_ Roof X 96 123 _ 0.92 0.079 0.87 7.4.8 96 0,051 0.45 250 _ _ Roof X 96 123_ 0_92 0.079_ 0.87 748 96 0.051_ _. 0.45 250 _ Roof Roof_ Roof- -- ----- ..------ Roof _ X _X -X--------96-.1230.92- X _ 96 123 92 _123 96 123 0.92 _0.92 0.92 0.079 _ 0.079 0.079._ 0.079 _- 0.87 0_.87, - 0.87 ----- 0.87 748 _- 716 748..__.... 748 8,174 SUBTOTAL 96 0.051 0.45 92_ 0.051 -0.45 __-96--0.051- _. 0.45 ---_._.250 96 0.051 0.45 Subtotals are entered under "Subtotal" in COLUMNS I and M of ENV -3-C, Part 6of7. 250 239- 250 ( _2,729 SUBTOTAL EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 51 of 146 I (Part 5 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 ROOF ABSORPTANCE CALCULATION OPAQUE SURFACES CHECK APPLICABLE BOXES Case 1 - Proposed YES NO 1. CRRC-1 Certified? 2. Is the thermal emittance > 0.75? 3. Enter the initial reflectance p wt value: 4. Calculate a P, = 0.94 - 0.7 p R.p., Go to 2. Go to 3. Go to 8. Go to 5. Go to 4. Insert value in calculation. Enter calculated value in Column F below. p R,P.P = a P, = Case 2 - CRRC-1 Tested F G 5. Enter initial reflectance & emittance values from CRRC-1 6. Calculate pR.PIP = - 0.448 + 1.121 pia + 0.524 Ewt 7. Calculate a P -P = 0.94 - 0.7 p RtP K E+ = Go to 6. Insert values in calculation. Go to 7. Insert value in calculation. Enter calculated value in Column F below. p 'd = p Rt, plop = a prop = 8. Not CRRC-1 Tested AREA SF For nonresidential low -sloped roofs: For all other roofs: a prep = 0.87 Enter default value in Column F below. a POP = 0.73 Enter default value in Column F below. Standard absorptance values for Column J are either HEAT GAIN (BxCxDxExF) AREA* (ADJUSTED) For nonresidential low -sloped roofs: For all other roofs: a:m = 0.45 Enter standard value in Column J below. a.d = 0.73 Enter standard value in Column J below. OVERALL HEAT GAIN FROM RADIATION OPAQUE SURFACES A 0- n o N E F G H T I J K PROPOSED STANDARD ASSEMBLY NAME (e.g. Roof -1) AREA SF WF U- FACTOR Absorp HEAT GAIN (BxCxDxExF) AREA* (ADJUSTED) U -Factor Absorp HEAT GAIN (CxDXHXIXJ) Roof X 63 123 0.92 0.079 0.87 488 63 0.051 0.45 163 Roof 8$ 12 0.92 0 07 _0,8-7 68.4_-_-_ _8$ ---0--05-1-- 0,_45 229 Roof X 88 123 0.92 0.079 0.87 684 88 0.051 0.45 229 Roof X 86 123 0.92 0.079 0.87 668 86 0.051 0.45 223 Roof _ X_ 85 123 0_.92 0.079 0.87 661 85 0.051 0.45 221 Roof X 85 123 0.92 0.079 0.87 664 85-_0.051 0._4.5 222 _Roof X 69 123 0.92 0.079 0._87 _ 537 69. 0.051 0.45 179 Roof _Roof Roof-- - -- -- Roof X60.1230.92 X72123_0_92 -X..- X - ---96.123_ 96 123 _ 0.92 0.92 0_.079 _0.079 _ 0.079 0.079-0.8711 0.87 _0.87 0.87 _ 46760_ 0.051 0.45_ 559720.051 0.45.__ - -----748 -- - -- 96 --- 0.051- 748 96 0.051 0.45 6,90 - Subtotals are entered under "Subtotal" SUBTOTAL in COLUMNS I and M of ENV -3-C, Part 6of7. __156_ _ 187 250 2,307 SUBTOTAL EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 52 of 146 (Part 5 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 ROOF ABSORPTANCE CALCULATION OPAQUE SURFACES CHECK APPLICABLE BOXES Case 1 - Proposed YES NO 1. CRRC-1 Certified? 2. is the thermal emittance > 0.75? 3. Enter the initial reflectance pw, value: 4. Calculate a, = 0.94 - 0.7p Rl.prop Go to 2. Go to 3. Go to 8. Go to 5. Go to 4. Insert value in calculation. Enter calculated value in Column F below. p RI,P.P = lapoop = Case 2 - CRRC-1 Tested A 5. Enter initial reflectance & emittance values from CRRC-1 6. Calculate pR;,p, = - 0.448 + 1.121 p i,it+ 0.524 Eiot 7. Calculate aP,op = 0.94 - 0.7 p R.P.p B C I E na = Go to 6. Insert values in calculation. Go to 7. Insert value in calculation. Enter calculated value in Column F below. p ioi, = pR.prop = a P -P = 8. Not CRRC-1 Tested 1 J For nonresidential low -sloped roofs: For all other roofs: a P -P = 0.87 Enter default value in Column F below. a Prop = 0.73 Enter default value in Column F below. Standard absorptance values for Column J are either _ STANDARD For nonresidential low -sloped roofs: For all other roofs: a ,w = 0.45 Enter standard value in Column J below. a.d = 0.73 Enter standard value in Column J below. OVERALL HEAT GAIN FROM RADIATION OPAQUE SURFACES A E _�, 0_ 0 aKAREASF B C I D E F G H 1 J K PROPOSED _ STANDARD ASSEMBLY NAME. (e.g. Roof -1) WF U- FACTOR Absorp HEAT GAIN (BxCxDxExF) AREA* (ADJUSTED) U -Factor Absorp HEAT GAIN (CxDxHxlxJ) Roof X 123 0.92 0.079 0.87 748 96 0.051 0.45 250 Roof - _ 23 0.92 07 .87 48 96 043Roof X 123 0.92 0.079 0.87 748 96 0.051 0.45 250 Roof X 123 0.92 0.079 0.87 748 96 0.051 0.45 250 Roof X 123 0.92 0.079 0.87 772 99 0.051 0.45 258 Roof X 92 123 0.92 0.079 0.87 71992 0.051 0.45 240 Roof X 641_123 092 0.079 0.87 4,985 6410.051 _0_45 1,665 Roof X641_123 83 123 0.92 0.92 0.079_ 0.079 0.87 0.87 4,985__-___64.1__OA51____0,45 649 83 0.051 Roof X 0.45 217 Roof ---------- ---- --- Roof -_ _-_ - -_ _. X- -X_ ----114 123 154 123_ _0. 92"... .0.92_- 0.079 -_ 0.079__ 0.8171-1-1''..- 0.87_ _ - 888 1,198 17,18 SUBTOTAL - ------114 .._ _0.051 0.45 - __- 154 0.051 -_ 045 _--- Subtotals are entered under "Subtotal" in COLUMNS I and M of ENV -3-C, Part 6of7. - -- - 297. ---- 400 5,739 SUBTOTAL EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 53 of 146 (Part 5 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulator Care Center 10/17/2008 ROOF ABSORPTANCE CALCULATION OPAQUE SURFACES CHECK APPLICABLE BOXES Case 1 -Proposed YES NO 1. CRRC-1 Certified? 2. Is the thermal emittance > 0.75? 3. Enter the initial reflectance p iii, value: 4. Calculate a pPp = 0.94 - 0.7 p Ri.prop Go to 2. Go to 3. Go to 8. Go to 5. Go to 4. Insert value in calculation. Enter calculated value in Column F below. p Ri.pl, = a p.pp = A$ Case 2 - CRRC-1 Tested B C D 5. Enter initial reflectance & emittance values from CRRC-1 6. Calculate PKPIP = - 0.448 + 1.121 p n + 0.524 Emit 7. Calculate aP.,= 0.94 - 0.7 p Ri,pap G E = Go to 6. Insert values in calculation. Go to 7. Insert value in calculation. Enter calculated value in Column F below. p , = p Ri.p,,p = a P"P = 8. Not CRRC-1 Tested PROPOSED STANDARD For nonresidential low -sloped roofs: For all other roofs: a P- = 0.87 Enter default value in Column F below. a P -P = 0.73 Enter default value in Column F below. Standard absorptance values for Column J are either SF WF For nonresidential low -sloped roofs: For all other roofs: a ra = 0.45 Enter standard value in Column J below. a .d = 0.73 Enter standard value in Column J below. OVERALL HEAT GAIN FROM RADIATION OPAQUE SURFACES A$ 0_, .0 H B C D E F G H I J K PROPOSED STANDARD ASSEMBLY NAME (e.g. Roof -1) AREA SF WF U- FACTOR Absorp HEAT GAIN (BxCxDxExF) AREA* (ADJUSTED) U -Factor Absorp HEAT GAIN (CxDxHxlxJ) Roof X 295 123 0.92 0.079 0.87 2,297 295 0.051 0.45 767 Roof_ 452 123 0.92 ,079 87 51 45 0,051 94- t174 Roof X 1,982 123 0.92 0.079 0.87 15,414 1,982 0.051 0.45 5,147. Roof X 1,982 123 0.92 0.079 0.87 15,414 1,982 0.051 0.45 5,147 Roof X 416 123 0.92 0.87 3,232 416 0.051 1,079_ Roof X 316 123 0.920.079 _0.079 0_87 2,457 316 0.051 _0_45 0.45 _820_ _Roof X 455. 123 0.92 _ 0.079 _0.87 3,542 455 0.051 0_45 1 183_ _ Roof 50.123. 0.92 _ 0.92 0.079 0.079 0.87 393_ 50 0.051_ 0.45 13.1 _ Roof _X_ X 80 123 0.87 _- 620 80 0.051 0.45 ..._ _ _ 207 Roof -- -------___--X_ Roof X ....----.80 123___0.92__,___0_.079____,_,0.87 80 123 0.92 0.079 0.87 622. 622 l_ _ 48,13' SUBTOTAL --- 80___--0,0510.45 __.-- 80 0.051 0.45 Subtotals are entered under "Subtotal" in COLUMNS I and M of ENV -3-C, Part 6of7. 208 208 SUBTOTAL EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 54 of 146 (Part 5 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 ROOF ABSORPTANCE CALCULATION RADIATION OPAQUE SURFACES CHECK APPLICABLE BOXES Case 1 - Proposed YES NO 1. CRRC-1 Certified? 2. Is the thermal emittance > 0.75? 3. Enter the initial reflectance p inift value: 4. Calculate a prep = 0.94 - 0.7 p Ri. prpp Go to 2. Go to 3. Go to 8. Go to 5. Go to 4. Insert value in calculation. Enter calculated value in Column F below. p Ri.pr, a prop = Case 2 - CRRC-1 Tested A 5. Enter initial reflectance & emittance values from CRRC-1 6. Calculate pRl.p,pp = - 0.448 + 1.121 p ni + 0.524 Emit 7. Calculate a prop = 0.94 - 0.7 p Ri,p.p B C Ew, = Go to 6. Insert values in calculation. Go to 7. Insert value in calculation. Enter calculated value in Column F below. pint = p Ri,p,.p = a P', = 8. Not CRRC-1 Tested I J For nonresidential low -sloped roofs: For all other roofs: a pipe = 0.87 Enter default value in Column F below. �ap = 0.73 Enter default value in Column F below. Standard absorptance values for Column J are either _ STANDARD For nonresidential low -sloped roofs: For all other roofs: a .d = 0.45 �a.d = 0.73 Enter standard value in Column J below. Enter standard value in Column J below. OVERALL HEAT GAIN FROM RADIATION OPAQUE SURFACES A !E .0 o N B C D E F G H I J K PROPOSED _ STANDARD ASSEMBLY NAME (e.g. Roof -1) AREA SF WF U- FACTOR Absorp HEAT GAIN (BxCxDxExF) AREA" (ADJUSTED) U -Factor Absorp HEAT GAIN (CxDxHxlxJ) Roof X 117 123 0.92 0.079 0.87 908 117 0.051 0.45 303 _oQf52 1.2_ 0.92 O 07_9 0,87 _-402_ 5 ,05 --0.45- _13, - Roof X 218 123 0.92 0.079 0.87 1,695 218 0.051 0.45 566 Roof X 109 1.23 0.92 0.079 0.87 847 109 0.051 0.45 283 Roof X 102 123 0.92 0.079 0.87 796 102 0.051 0.45 266 Roof X 1.85 123 0_92 0.079 0:87 _ 1,437 _ 185 0.051 _0.45 480 Roof _ X 117 0_92 0.079 117 0.051 0.45 304 _..__._ Roof _ _84 107. _1.23 1.23 123 0..92 -0.87911 0.87- 0.87 ---_ - 653 835 84 - 0.45 0.45 -__-----218 279 ---__-_-- -_- ----._-_. Roof_- -X X _..__0.079 0.079 -- _ 107 --0.051 - 0.051 _ _ _ Roof X _-.__-84 123_- 106 123 _092 0.92 0.92 _ _ 0.079_--- 0.079 -0.87-- 0.87 _----_ - 650 8231 9,95 SUBTOTAL ._ _ _ _------_-84 -0.051-- -- ---0.45.__ 106 0.051 0.45 Subtotals are entered under "Subtotal" in COLUMNS I and M of ENV -3-C, Part 6of7. _- __--_-_217_ 275 3,325 SUBTOTAL EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 55 of 146 (Part 5 of 7) ENV -3-C PROJECT NAME latory DATE Eisenhower AmbuCare Center 10/17/2008 ROOF ABSORPTANCE CALCULATION OPAQUE SURFACES CHECK APPLICABLE BOXES Case 1 - Proposed YES NO 1. CRRC-1 Certified? 2. Is the thermal emittance > 0.75? 3. Enter the initial reflectance p,nft value: 4. Calculate ap. , = 0.94 - 0.7 p R.p,op Go to 2. Go to 3. Go to 8. Go to 5. Go to 4. Insert value in calculation. Enter calculated value in Column F below. pR.p,p= a P -P = Case 2 - CRRC-1 Tested A f3 .0 0; 5. Enter initial reflectance & emittance values from CRRC-1 6. Calculate pR,.P.PP = - 0.448 + 1.121 p mit + 0.524 E im 7. Calculate a P -P = 0.94 - 0.7 p R. p D mit Go to 6. Insert values in calculation. Go to 7. Insert value in calculation. Enter calculated value in Column F below. p im = p R,p,op = a PPP = I 8. Not CRRC-1 Tested K For nonresidential low -sloped roofs: For all other roofs: a PPP = 0.87 Enter default value in Column F below. a P, = 0.73 Enter default value in Column F below. Standard absorptance values for Column J are either ASSEMBLY NAME (e.g. Roof -1) AREA For nonresidential low -sloped roofs: For all other roofs: a :.d = 0.45 Enter standard value in Column J below. �.a std = 0.73 Enter standard value in Column J below. OVERALL HEAT GAIN FROM RADIATION OPAQUE SURFACES A f3 .0 0; B C D E F G H I J K PROPOSED STANDARD ASSEMBLY NAME (e.g. Roof -1) AREA SF WF U- FACTOR Absorp HEAT GAIN (BxCxDxExF) AREA* (ADJUSTED) U -Factor Absorp HEAT GAIN (CxDxHxlxJ) Roof X 270 123 0.92 0,079 0.87 2,099 270 0.051 0.45 701 -Roof--46 A23 0.92 0.079____0_B7__362 362 46 _0 05 045 121 Roof X 46 123 0.92 0.079 0.87 46 0.051 0.45 121 Roof X 228 _123 0.92 0.079 0.87 1 772 228 0.051 0.45 592 Roof X 18 123 0.92 0.079 0.87 141 18 0.051 0.45 47 Roof _ X 460 123 0.92 _ 0.079 0_87 _ 3,582 460 0.051 0.45 1,196 Roof X 96 123 0.92 0.079 0.87 748 96 0.051 0.45 250 Roof __ __-_-___ 96 123_0.92___0.079 0._079_ -_0.87 7489.60.051 0_..45 .-_-._.__25.0, 250_ Roof _X_._ X-_ 123 0.92 748__- Roof------- - _X__.__-._91 X _96 _123 -- 90.123 0.92-- _0.92_ 0.079___ _ 0.079 _0.87 _ 0.87 - --- 0.87 707 -- 704_ 11,973 SUBTOTAL _96_-_0.0510_45 910._051 _._ 0..45_ _. -------.90 - 0.051 - 045--. Subtotals are entered under "Subtotal" in COLUMNS I and M of ENV -3-C, Part 6of7. ________ 236 - - 235 3,998 SUBTOTAL EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 56 of 146 (Part 5 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 ROOF ABSORPTANCE CALCULATION OPAQUE SURFACES CHECK APPLICABLE BOXES _ Case 1 - Proposed YES NO 1. CRRC-1 Certified? 2. Is the thermal emittance > 0.75? 3. Enter the initial reflectance p a value: 4. Calculate a POP = 0.94 - 0.7 P R,pl.p Go to 2. Go to 3. Go to 8. Go to 5. Go to 4. Insert value in calculation. Enter calculated value in Column F below. p R.P,.p o a Prop = Case 2 - CRRC-1 Tested A f 6�, .0 5. Enter initial reflectance & emittance values from CRRC-1 6. Calculate pR.P,PP = - 0.448 + 1.121 p init+.0.524 EPR 7. Calculate a P -P = 0.94 - 0.7 p RtPPP D T E+ = Go to 6. Insert values in calculation. Go to 7. Insert value in calculation. Enter calculated value in Column F below. p mit _ p RiPrPP = a Prop = I 8. Not CRRC-1 Tested K For nonresidential low -sloped roofs: For all other roofs: a P, -P = 0.87 Enter default value in Column F below. a PAPP = 0.73 Enter default value in Column F below. Standard absorptance values for Column J are either ASSEMBLY NAME (e.g. Roof -1) For nonresidential low -sloped roofs: For all other roofs: a .�a = 0.45 Enter standard value in Column J below. a =d = 0.73 Enter standard value in Column J below. OVERALL HEAT GAIN FROM RADIATION OPAQUE SURFACES A f 6�, .0 B C D T E F G H I J K PROPOSED _ STANDARD ASSEMBLY NAME (e.g. Roof -1) WF U- FACTOR Absorp HEAT GAIN (BxCxDxExF) AREA" (ADJUSTED) U -Factor Absorp HEAT GAIN (CxDxHxlxJ) Roof X 96 123 0.92 0.079 0.87 748 96 0.051 0.45 250 Roof -----61 123 0_92 0,07_9 87 476 4 0,.051 045 15 Roof X 38 123 0.92 0.079 0.87 292 38 0.051 0.45 98 Roof X 294 123 0.92 0.079 0.87 2,287 294 0.051 0.45 764 Roof X 503 123 0.92 0.079 0.87 3,914 503 0.051 0.45 1,307 _Roof X 32 123 0.92 0.079 0.87 250._ 32 0.051 0.45 83 Roof- _ X 641 123 0_92 _0.079- 0.87 4,985 _ 6410.051 0.45 _ 1665 322 -123---_0.92---O.0-79-0,.87----.-2,508- _322 ---0.051-_ _ _ 0.45_ 838_ Roof X 28 123 0.92 0.079 0.87 215 28 0.051 0.45 72 Roof --_---------_----_ X_ ----132 123-- 0.92-_ _._ 0.079 _0.87-- -_-__-_-1,029. -- _ 132 _ 0,051 ----__.0.45 344. Roof - X _ 133123 0.92_ -_ 0.079--- 0.87- -__ -_ 1,037 ---133 __.0.051 -_ 0.45 _ 346 17,74 Subtotals are entered under "Subtotal" [- 5,9241 _-..._ SUBTOTAL in COLUMNS I and M of ENV -3-C, Part SUBTOTAL 6of7. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 57 of 146 I (Part 5 of 7) ENV -3-C I PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008_ ROOF ABSORPTANCE CALCULATION OPAQUE SURFACES CHECK APPLICABLE BOXES Case 1 - Proposed YES NO 1. CRRC-1 Certified? 2. Is the thermal emittance > 0.75? 3. Enter the initial reflectance pint value: 4. Calculate a PAPP = 0.94 - 0.7p RI. PPP Go to 2. Go to 3. Go to 8. Go to 5. Go to 4. Insert value in calculation. Enter calculated value in Column F below. p Rt POP = a P,op = Case 2 - CRRC-1 Tested A fN 0M a 3 o �'� 5. Enter initial reflectance & emittance values from CRRC-1 6. Calculate pR,.Plop = - 0.448 + 1.121P init+ 0.524 Einit 7. Calculate a,.p = 0.94 - 0.7p Ri. p D E "d = Go to 6. Insert values in calculation. Go to 7. Insert value in calculation. Enter calculated value in Column F below. p init = p RI.PlIp = a P, = 8. Not CRRC-1 Tested J K For nonresidential low -sloped roofs: For all other roofs: a P- = 0.87 Enter default value in Column F below. a p -P = 0.73 Enter default value in Column F below. Standard absorptance values for Column J are either ASSEMBLY NAME (e.g. Roof -1) For nonresidential low -sloped roofs: For all other roofs: a - = 0.45 Enter standard value in Column J below. a.Id = 0.73 Enter standard value in Column J below. OVERALL HEAT GAIN FROM RADIATION OPAQUE SURFACES A fN 0M a 3 o �'� B C D E F G H I J K PROPOSED STANDARD ASSEMBLY NAME (e.g. Roof -1) AREA SF WF U- FACTOR Absorp HEAT GAIN (BxCxDxExF) AREA* (ADJUSTED) U -Factor Absorp HEAT GAIN (CxDxHxlxJ) Roof X 502 123 0_92 0.079 0.87 3_902 502 0.051 0.45 1,303 Roof _50 123 0.92 007 -87 __622 80 __05J__ 45 _208 Roof X 129 123 0.92 0.079 0.87 1,001 129 0.051 0.45 334 Roof X 61 123 0.92 0.079 0.87 474 61 0.051 0.45 158 Roof X 74 123 0.92 0.079 0.87 574 74 0.051 0.45 192 Roof . _ X__ 502 123 0_92 _0.079 0.87 3 902 _502_0.051 0.45 1,303, Roof X 341 123 0.92 0.079 0.87 _ 2,651 3410.051 0_45 885 Roo_f X242 123 123 0.920.0790.87 0.92 0.079 0.87 1,879_ 58776 242 0.051 0.051 0.45627_ 0.45 196 Roof X 76 Roof________ Roof - ---- -- -- X X- 778 123.. -- _42 123_ _0.92_. _0.92 __ 0.079-_-_ 0.079 - __0.87_ -0.87_ _______6,048_________778__ 323- 21,964 SUBTOTAL ----42 -0.051_._ - 0.45 Subtotals are entered under "Subtotal" in COLUMNS I and M of ENV -3-C, Part 6of7. 108 SUBTOTAL EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 58 of 146 (OVERALL ENVELOPE METHOD (Part 6 of 7) ENV -3 -CI PROJECT NAME DATE Eisenhower Ambulatory Care Center I 10/17/2008 OVERALL HEAT GAIN FROM RADIATION FENESTRATION SURFACES A B C I D I E I F G I H I J K L M INDOW/SKYLIGHT NAME e.g. Wind -1, Sky -1) ORIENT. WEIGHTING( FACTOR PROPOSED STANDARD AREA SF SHGC OVERHANG HEAT GAP$ (BxCxDxExH) AREA 3 (ADJUSTED) RSHG 4 orSHGC SF HEAT GAIN (BxJxKxL) H V HN OHF Window S 1.27 46123 Part 6 Subtotal 0.36 from Part 6 of 7. 2,564 46 0.36 123 2,564 Window W 1.05 108 123 0.36 4,998 108 0.36 123 4,998 Window N 0.61 46 123 0.36 1,232 46 0.51123 1,745 Window S 1.27 26123 1,434 26 0.36 123 1,434 Window S 1.27 26' 123 0.36 1,434 26 0.36 123 1,434 Window S 1.27 26123 0.36 1.434 26 0.36 123 1,434 Window S Skylight H 1.27 2.29 26 15! 123 123 0.36 0.36 1,434 1 531 26 15 0.36 0.46 123 123 1,434 1,956 Window S 1.27 2 123 0.36 1,434 26 0.36 123 1,434 VAndow S 1.27 2 123 0.36 1,434 26 0.36 123 1,434 Window S 1.27 2 123 0.36 1,434 26 0.36 123 1434 Window S 1.27 2 123 0.36 1,434 26 0.36 123 1,434 Window W 1.05 1 123Q 604 13 0.36 123 604 Window E 1.07 34123 0.36 1,599 34 0.36 123 1,599 Window -N 0.61 7& 123 _0.36 2_107 --_-___ 78 0.51 123 2,985 Window W 1.05 34123 0.36-F- 1,569 34 0.36 123 1,569 Window N 0.61 -.40 123 0.36 1,070 40 0.51123 1,515 Window N 0.61 40 123_ 0.36 1,070 40 0.51123 1,515 Window E 1.07 40 123 0_36 876 40 0.36. 123 1 876 Window 1.07 5 123 _0.36 1 2.151 45 0.36 123 2,151 Window S 1.27 45 1230.36 2,553 45 0.36 123 2 553 Wnddw__S_ 1.27 92 123 -_0,36 5,17.4 92 0_36 123 5,174 Window W 1.05 22123 0.36 1,023 22 0.36 123 1,023 Window _ 1.05 45 123 .0 36----- 0.36 2,092 45 0.36 123 Window S 1.27 22123 _ 1,237 22 0_36 123 ___2,092 1,237 Window W105 Window _ W 1.05 13 1 123 123 0.36_ 0_36 -_ 604 13 123 123 604 604 .__ 604 13 -0_36 0 36 Window W 1.05 13123 0.36 _ -_ 604 13 0.36 123 604 1. From Fenestration Surfaces ENV -1-C, Part 2, Column G, or when Column 439,439 470,476 H has a "C' identifier, calculate using the center of glass value SHGCc in part 4 Subtotal -- - - Part 4 Subtotal - --- - SHGCfen = .08 + (0.86xSHGCc) and enter value. 2. Proposed Heat Gain, Column I may be no greater than Standard Heat Part 5 Subtotal 266,379 Part 5 Subtotal �- 88,948 Gain Column M. 3. If Window and/or Skylight Area Adjustment is required, use adjusted area Part 6 Subtotal 192,8331 Part 6 Subtotal L 213,391 from Part 6 of 7. 4. Only SHGC is used for Skylights 898,652 Total Heat Gain 772,814 EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number 07.0021 Page.59 of 146 OVERALL ENVELOPE METHOD (Part 6 of 7) ENV -3-C PROJECT NAME latory DATE Eisenhower AmbuCare Center 10/17/2008 OVERALL HEAT GAIN FROM RADIATION FENESTRATION SURFACES A B C D E F G H I J I K L M WINDOW/SKYLIGHT NAME e. Wind -1, Sky -1) ORIENT. 9• Y ) � WEIGHTING FACTOR PROPOSED STANDARD AREA SF 1 SHGC OVERHANG HEAT xGAIWExH) (BxCxDxExH) AREA 3 (ADJUSTED) RSHG a or SHGC SF HEAT GAIN (BxJxKxL) H V HN OHF Window W 1.05 13123 Part 6 Subtotal 0.36 from Part 6 of 7. 604 13 0.36 123 604 Window S 1.27 1 123 0.36 613 11 0.36 123 613 Window S 127 1 123 0.36 613 11 0.36 123 613 Window S 1.27 1 1236 613 11 0.36 123 613 Window S 1.27 11 1230.36 613 11 0.36 123 613 Wiii ndow E 1.07 18123 0 .36 848 18 0.36 123 848 Window E 1.07 18123 0.36 848 18 0.36 123 848 Window E 1.07 1 123 0.36 848 18 0.36 123 848 Window S 127 2 123 0.36 1,187 21 0.36 123 1,187 Window E 1.07 69 123 0.36 3 283 69 0.36 123 3,283 Window E 1.07 69 123 0.36 3,283 69 0.36 123 3,283 Window N 0.61 6 123 0.36 1,872 69 0.51123 2,652 Window N 0.61 1 123 0.36 483 18 0.51123 685 Window E 1.07 1 123 0.36 848 18 0.36 123 848 Window W 1.05 2 123 0.36 981 21 0.36 123 981 Window - E 1.07 2 123 0.36 1,000 21 0.36 123 1,000 Window E 1.07 69 123 0.36 3,283 69 0.36 123 3 283 Vndow N_0.61 gg 123 0,36 -_ 1,872 _69 0.51123 2,652 Window N 0.61 _69 123 0.36 1,872 69 - 0.51 123 2,652 Window _N- 0.61 6g 123 -0.3 1,872- _ 69 0.51 123 2,652 Window N 0.61 69 123 0.36 1,872 69 0.51 123 2,6U2 Window N__ Window N 0.61 0.61 18 18 123 1123 0.36 0.36 _ 48.3. _- 18 0.51 123 6-8-5 483 18 0.51123 685 Window--- _ S- _1.27 18 123 0_36 - 1,007 _ 18 0.36 123 1,007 Window S- 1.27 18 123 0.36 1,007 18 0.36 123 1007 WindowS_ 1.27 1 123 Window --___S--_--1.27 18 123 0.36 1,007 18 0.36 123 1,007 Window W 1.05 1 123 0.361 _ - 832 - 18 -__ 0.36 123 832 1. From Fenestration Surfaces ENV -1-C, Part 2, Column G, or when Column ---- part 4 Subtotal 439,439 E- Subtotal ------ 470,476 H has a "C" identifier, calculate using the center of glass value SHGCc in -- -- Part 4 - -- - - SHGCfen = .08 + (0.86xSHGCc) and enter value. 2. Proposed Heat Gain, Column I may be no greater than Standard Heat P266,379 Part 5 Subtotal Part 5 Subtotal 88,948 Gain Column M. 3. If Window and/or Skylight Area Adjustment is required, use adjusted area Part 6 Subtotal 192,833 Part 6 Subtotal 213,391 from Part 6 of 7. 4. Only SHGC is used for Skylights 898,652 Total Heat Gain 772,814 EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number 07.0021 Page 60 of 146 OVERALL ENVELOPE METHOD (Part 6 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 OVERALL HEAT GAIN FROM RADIATION FENESTRATION SURFACES A B C I D E F G H I J K L M INDOW/SKYLIGHT NAME e.g. Wind -1, Sky -1) ORIENT. WEIGHTING FACTOR PROPOSED STANDARD AREA SF �SHGC t OVERHANG HEAT GAIW (BxCxDxExH) AREA 3 (ADJUSTED) RSHG 4 orSHG SF HEAT GAIN (BxJxKxL) H V H/V OHF Window W 1.05 18 1123 Part 6 Subtotal 0.36 from Pan 6 of 7. 832 18 0.36 123 832 Window S 1.27 18123 0.36 1007 18 0.36 123 1,007 Window S 1.27 18 123 0.36 1,007 18 0.36 123 1,007 Window S 1.27 1.0071 18 0.36 123 1,007 Window S 1.27 18_123 18! 123 0.36 1,007 18 0.36 123 1,007 Window S 1.27 18123 0.36 1,007 18 0.36 123 1,007 Window S 127 18 123 0.36 1,007 18 0.36 123 1,007 Window W 1.05 18123 0.36 832 18 0.36 123 832 Window W 1.05 18 123 0.36 832 18 0.36 123 832 Window N 0.61 18123 0.36 483 18 0.51123 685 Wndow N Window N 0.61 0.61 18x1.23 18123 0.36 0.36 483 483 18 18 0.51123 0.51123 685 685 Window N 0.61 18 123 _Q_36 4831 18 0.51 123 685 Wndow N 0.61 18 123 0.36 483 18 0.51123 685 Window N 0.61 18 123 0.36 483 18 0.51123 685 Wndow N 0.61 18123 0.36 483 18 0.51123 685 Wndow N 0.61 18 123 0.36 483 18 0.51123 685 Wndow- W Wndow W 1.05 1.05 18123 18 123 0.36 0.36 _ _8_32 832 18 18 036-123 0.36 123 832 832 Window- W 1.05 123 _36 3 754 81 0.36 123 3,754 Window S 1.27 124 123 6,945 124 0.36 123 _ 6,945 Window W 1.05 5.-_-123 _-_0.36. _0-.36 _-.2,325 3,441 50 _0.36 123 ----------2,325 Window W 1.05 74 123 0.36 74 0.36 123 3 441 Window _ W 1,05 89 123 0.36-. 4,152 89 0_36 123 ___4,152 Wndow W 1.05 219' 123 0.36 10,194 219 0.36_123 10,194 Wndow- ------ 1.27 ---- $ 2q 123. 123 0.36--- 0.36 4,152 ---89 20 -- 0.36 0.36. 123 123- _W...__1.05-- Wndow _ S_ -- 1-,113_ 1,113 Window S 1.27 201123 0.36 _ 1,113 1-- 20 0.36 123 1,113 1. From Fenestration Surfaces ENV -1-C, Part 2, Column G, or when Column part 4 Subtotal 439,439 Part 4 Subtotal r 470,476 H has a "C identifier, calculate using the center of glass value SHGCc in - - - - SHGCfen = .08 + (0.86xSHGCc) and enter value. 266,379 88,948 2. Proposed Heat Gain, Column I may be no greater than Standard Heat Part 5 Subtotal Part 5 Subtotal Gain Column M. 3. If Window and/or Skylight Area Adjustment is required, use adjusted area Part 6 Subtotal 1921833 Part 6 Subtotal 213,391 from Pan 6 of 7. 4. Only SHGC is used for Skylights 898,652 Total Heat Gain 772814 EnergyPro 4.4 by EnergySoft User Number 5678 Job Number 07.0021 Page 61 of 146 OVERALL ENVELOPE METHOD (Part 6 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 OVERALL HEAT GAIN FROM RADIATION FENESTRATION SURFACES A B CTD E F G H '', I J K L M WINDOW/SKYLIGHT NAME e.g. Wind -1, Sky -1) ORIENT. WEIGHTING FACTOR PROPOSED STANDARD AREA SF �SHGCJH OVERHANG HEAT GAIN2 (BxCxDxExH) AREA 3 (ADJUSTED) RSHG q or SHGC SF HEAT GAIN (BxJxKxL) 88,948 _ V HIV OHF Window N 0.61 20123 Part 6 Subtotal 0.36 from Part 6 of 7. 535 20 0.51123 772,814 758 Window N 0.61 20123 0.36 535 20 0.51123 758 Window N 0.61 20123 0.36 535 20 0.51123 758 Window N 0.61 20123 0.361 535 20 0.51123 758 Window S 1.27 20123 0.36 1,113 20 0.36 123 1,113 VVindow S 1.27 2C 123 0.36 1113 20 0.36 123 1,113 Window N 0.61 20, 123 0.36 535 20 0.51123 758 Window N 0.61 20123 0.36 535 20 0.51123 758 VVindow N 0.61 20123 0.36 535 20 0.51123 758 Window N 0.61 20123 0.36 535 20 0.51123 758 Window N 0.61 2 123 0.36 535 20 0.51123 758 Window N 0.61 20123 0.36 535 20 0.51123 758 VVindow N 0.61 18 123 0.36 4,881 181 0.51 123 6-915 Window N 0.61 129 123 0.36 3,484 129 0.51 123 4,936 VVindow S 1.27 20.123 0.36 1-113 20 _ 0.36 123 1,113 VVindow S 1.27 20 123 0.361 1,113 20 0.36 123 1,113 VVindow S 1.27 20 123 0.36 1,113 20 0.36 123 1,113 _Window-_ S__127 20 123 1,113 20 0.3.6. 123 _ 1,113 VVindow _ S 1.27 107 123 _0.36 0.36 60-00 107 0.36 123 6,000 Wind E 1_07 9 12.3 0..36 3,283 69 0.36 123 3,283 Window E 1.07 20123 0.36 938 20 20 0.36 _ 0.36 123 123 938 938 Window _ E 1.07 2123 .0..36. 0.36 _ 93g_ Window E 1.07 2 123 - 938 20 0.36 123 938 Window E 1.07 20_123 _O,3B 938_ 20 0.36 12_3_ 938 Window _ N VVindow E 0.61 1.07 206 82 123 123 0.36 0.36 _ 5,564 3,871 206 82 _ 0.51 0.36 123 123_ 7 883 3,871 VVindow _ _N 9a 123 0.36_ __- 2,515 93_ 0_51 123 3,562 VVindow E _0_61_ 1.07 39123 0.36 1,862 39 0.36 123 1,862 1. From Fenestration Surfaces ENV -1-C, Part 2, Column G, or when Column 439,439-1 470,476 H has a "C identifier, calculate using the center of glass value SHGCc in Part 4 Subtotal - Part 4 Subtotal - -- --- SHGCfen = .08 + (0.86xSHGCc) and enter value. 2. Proposed Heat Gain, Column I may be no greater than Standard Heat 266,379 Part 5 Subtotal _ _ _ Part 5 Subtotal 88,948 _ Gain Column M. I192 3. If Window and/or Skylight Area Adjustment is required, use adjusted area Part 6 Subtotal , 833 Part 6 Subtotal _ 213,391 from Part 6 of 7. 4. Only SHGC is used for Skylights 898,652 Total Heat Gain 772,814 EnergyPro 4.4 by EnergySoft User Number 5678 Job Number -07.0021 Page 62 of 146 OVERALL ENVELOPE METHOD (Part 6 of 7) ENV -3-C PROJECT NAME mDATE Eisenhower Abulatory Care Center _ _ 10/17/2008 -�] OVERALL HEAT GAIN FROM RADIATION FENESTRATION SURFACES A B C D E I F I G I H I J K L M INDOWISKYLIGHT NAME e.g. Wind -1, Sky -1) ORIENT. WEIGHTING1 FACTOR PROPOSED STANDARD AREA SF �SHGCIH OVERHANG HEAT GAIW (BxCxDxExH) AREA 3 (ADJUSTED) RSHG q or SHGC SF HEAT GAIN (BxJxKxL) V I HIV OHF Window E 1.07 3G123 from Part 6 of 7. 0.36 4. Only SHGC is used for Skylights 898,652 1,862 39 0.36 123 1,862 Drive Thru Window E 1.07 29 123 0.36 28.5 10.2 2.78 1.00 1,369 29 0.36 123 1,369 Under Awning Window E Window N 1.07 0.61 �39�123 3�9' 123 0.3628.511.92.41 0.36 1.00 1,862 1.0621 39 0.36 123 1,862 39 0.51 1231 1,504 Window N 0.61 39 123 0.36 1,062 39 0.51 123 1,504 Window N 0.61 39123 0.36 1,062 39 0.51123 1,504 Window N 0.61 39 123 0.361 1,062 39 0.51123 1504 Window N Window N 0.61 0.61 39 39 123 123 0.36 0.36 1,062 1,062 39 39 0.51123 0.51 123 1,504 1,504 1. From Fenestration Surfaces ENV -1-C, Part 2, Column G, or when Column 439,439 470,476 H has a "C' identifier, calculate using the center of glass value SHGCc in part 4 Subtotal Part 4 Subtotal - --- SHGCfen = .08 + (0.86xSHGCc) and enter value. 266 379 88,948 2. Proposed Heat Gain, Column I may be no greater than Standard Heat Part 5 Subtotal Part 5 Subtotal Gain Column M. 3. If Window and/or Skylight Area Adjustment is required, use adjusted area Part 6 Subtotal (_ 192,8331 Part 6 Subtotal 213 391 from Part 6 of 7. 4. Only SHGC is used for Skylights 898,652 Total Heat Gain 772,814 EnergyPro 4.4 by EnergySoft User Number 5678 Job Number 07.0021 Page 63 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 1 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS X❑ CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION D E E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N E S W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:64 of 146 TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATIONS XI CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:64 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS 0 CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATIONGROSS D E E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) AREA DOOR AREA WINDOW AREA N E S W ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ TOTALS N/A TOTALS N/A KYLI HT AREA ADJUSTMENT CALCULATIONS X❑ CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:65 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS 0 CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N I E I S I W I ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:66 of 146 TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATIONS IX -1 CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:66 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N E S W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:67 of 146 TOTALS N/A SKYLIGHT AREA ADJUSTMENT CALCULATIONS o CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:67 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS X❑ CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION D E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N I E I S IW ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:( of 146 TOTALS N/A KYLI HT AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 2 of 7) A B C ROOF NAME GROSS SKYLIGHT (e.g. Roof -1, Roof -2) AREA AREA D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:( of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS a CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION D E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA [N—FEJ [N—FES W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1:11:1 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1:11:11:1 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1:11:1 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:69 of 146 TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 2 of 7) A B C ROOF NAME GROSS SKYLIGHT (e.g. Roof -1, Roof -2) AREA AREA D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:69 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS IX -1 CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION I E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N I E I S jwj ❑o❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑FIFE ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:70 of 146 TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATIONS 0 CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:70 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 1 of 7) RIENTATION E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA �JNI EI S I W ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:71 of 146 TOTALS N/A KYLI HT AREA ADJUSTMENT CALCULATION a CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:71 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N I E I S I W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:72 of 146 TOTALS N/A KYLI HT AREA ADJUSTMENT CALCULATION u CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:72 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS 0 CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION D E E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wail -2) GROSS AREA DOOR AREA WINDOW AREA N I E I S I W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 071:17 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1:11:1 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ TOTALS I N/A EnergyPro 4A by EnergySoft User Number: 5678 Job Number: 07.0021 Page:73of 146 TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS I N/A EnergyPro 4A by EnergySoft User Number: 5678 Job Number: 07.0021 Page:73of 146 OVERALL ENVELOPE METHOD Part 7 of 7 ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N I E I S W ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑ ❑❑❑❑ ❑❑❑❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:74 of 146 TOTALS N/A [SKYLIGHT AREA ADJUSTMENT CALCULATION u CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:74 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS ❑ CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) _ A B C D WALL NAME (e.g. Wall -11 Wall -2) GROSS AREA DOOR AREA WINDOW AREA N I E I S I W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1:11:1 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:75 of 146 TOTALS N/A KYLI HT AREA ADJUSTMENT CALCULATION CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:75 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS ❑ CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N E S W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑❑❑❑ ❑❑❑❑ 1:11:11-1 F] ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:76 of 146 TOTALS N/A KYLI HT AREA ADJUSTMENT CALCULATION CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:76 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS 0 CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N E S W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ TOTALS N/A Energy Pro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:77 of 146 TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATION CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A Energy Pro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:77 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 1 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS IX -1 CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION E F SKYLIGHT ADJUST. FACTOR (From Part 1) E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N E S W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑o❑ ❑❑❑❑ ❑❑❑❑ TOTALS NLAL EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:78 of 146 TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 2 of 7) A B C ROOF NAME GROSS SKYLIGHT (e.g. Roof -1, Roof -2) AREA AREA D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) TOTALS NLAL EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:78 of 146 JOVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -CI PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 1 of 7) IENTATION D E E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA MNNE S W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑❑❑❑ ❑ ❑ ❑ ❑ ❑❑❑❑ 1:11:11-1 F-1 ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ 1:11:11:1 F-1 ❑❑❑❑ ❑❑❑❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number 07.0021 Page 79 of 146 TOTALS N/A KYLI HT AREA ADJUSTMENT CALCULATION X❑ CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number 07.0021 Page 79 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS Al CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATIONGROSS D E E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) AREA DOOR AREA WINDOW AREA N E I S W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑ TOTALS N/A TOTALS N/A KYLI HT AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF'NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:80 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS u CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N I E I S W1 ❑ ❑ ❑ ❑ ❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:81 of 146 TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATION U CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:81 of 146 JOVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -CI PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS X❑ CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N I E I S W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1:11:1 ❑ ❑ TOTALS N/A TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATIONS X CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by Energysoft User Number: 5678 Job Number: 07.0021 Page:82 of 146 JOVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS X❑ CHECK IF NOT APPLICABLE (See Part 1 of 7) D E E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA FORIENTATION N E S W ❑ ❑ ❑ ❑ 1:11:11-11:1 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑❑❑❑ TOTALS I N/A EnergyPro 4.4 by Energysoft User Number: 5678 Job Number: 07.0021 Page:83 of 146 TOTALS N/A KYLI HT AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS I N/A EnergyPro 4.4 by Energysoft User Number: 5678 Job Number: 07.0021 Page:83 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION D E E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N I E I S I W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1:11:11:1 ❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ TOTALS I N/A TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATIONS 0 CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS I N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:84 of 146 JOVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION D E E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N E S W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:85 of 146 TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATION u CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:85 of 146 [OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS u CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION D E E F G WINDOW ADJUST. F om Part 1ACTOR ( ) ADJUSTED WINDOW E (D XE ) ADJUSTED WALL AREA EAC B ( ) A B C D WALL NAME (e.g. Wall -11 Wall -2) GROSS AREA DOOR AREA WINDOW AREA N E S W ❑ ❑ ❑ ❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:86 of 146 TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATIONS X❑ CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:86 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS u CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N I E I S IW ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1:11:1 ❑ ❑ ❑ ❑ ❑ ❑ 1:11:1 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1:11:1 ❑ ❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:87 of 146 TOTALS N/A KYLI HT AREA ADJUSTMENT CALCULATION CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:87 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS u CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION D E E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N I E I S I W ❑ ❑ ❑ ❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ TOTALS N/A TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:88 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS ❑ CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION D E E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N I E I S IW 1:11-1 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑ TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:89 of 146 TOTALS I N/A KYLI HT AREA ADJUSTMENT CALCULATIONS 0 CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:89 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS XI CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION D E E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N E S W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1:10 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1:11:1 ❑ ❑ 1:11:11-11-1 ❑ ❑ ❑ ❑ TOTALS N/A TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATIONS ❑X CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOFNAMEGROSS (e.g. Roof -1, Roof -2) AREA SKYLIGHT AREA TOTALS N/A I EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:90 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION D E E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N E S W ❑ 1:11-1 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1:11:1 ❑ ❑ ❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑ TOTALS N/A TOTALS N/A KYLI HT AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A I EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:91 of 146 OVERALL ENVELOPE METHOD (Part 7 of 7) ENV -3 -Cl PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 WINDOW AREA ADJUSTMENT CALCULATIONS CHECK IF NOT APPLICABLE (See Part 1 of 7) ORIENTATION D E E F G WINDOW ADJUST. FACTOR (From Part 1) ADJUSTED WINDOW AREA (D X E) ADJUSTED WALL AREA B - (F + C) A B C D WALL NAME (e.g. Wall -1, Wall -2) GROSS AREA DOOR AREA WINDOW AREA N E S W ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ ❑❑❑❑ TOTALS N/A TOTALS N/A KYLIGHT AREA ADJUSTMENT CALCULATIONS 0 CHECK IF NOT APPLICABLE (See Part 2 of 7) D E F SKYLIGHT ADJUST. FACTOR (From Part 1) ADJUSTED SKYLIGHT AREA (C X D) ADJUSTED ROOF AREA (B - E) A B C ROOF NAME (e.g. Roof -1, Roof -2) GROSS AREA SKYLIGHT AREA TOTALS N/A EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:92 of 146 ENVELOPE COMPLIANCE (Part 1 of 2) ENV -4-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 AREA FOR LARGE ENCLOSED SPACES This worksheet applies to buildings with an enclosed space > 25,000 ft' with a ceiling height >15 ft and an LPD for the space for general lighting :0.5 W/ft2 A. Enter proposed daylit area as indicated on plans Proposed daylit area is indicated on pages_ of the plans B. Floor Area: 1 ft2 x 0.50 = Criterion 1: Proposed Daylit Area is equal to or greater than Minimum Daylit Area. C. Select the appropriate box based on the LPD in W/ft z: ❑ LPD >1.4 ❑1.0<LPD <1.4 ®0.5<LPD <1.0 Enter 3.6%-> Enter 3.3%-> Enter 3.0%-> D. Minimum skylight area: Enter the product B x C then divide by 100 E. Enter the proposed total skylight area in the large enclosed space Criterion 2: Proposed skylight area is equal to or greaterthan minimum skylight area. Criterion 3: Haze rating of skylight glazing or skylight diffuser is greater than 90%. Document and page number wit haze specification of skylight: Large enclosed space complies with Criteria 1, 2, and 3 above [Sections 143(C)1, 2, and 3]. 0 Proposed Daylit Area 0 Minimum Dalit Area 3.0 Skylight-Daylit Fraction 0 Minimum Skylight Area 0 Proposed Skylight Area EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:93 of 146 CERTIFICATE OF COMPLIANCE (Part 1 of 4) LTG -1-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 PROJECT ADDRESS 45-280 Seeley Drive La Quinta ---- Building Permit # PRINCIPAL DESIGNER - LIGHTING TELEPHONE Dwayne G. Miller 714.751.3354 DOCUMENTATION AUTHOR TELEPHONE Checked by/Date JBA Consulting Engineers (714) 751-3354 Enforcement Agency Use GENERAL INFORMATION DATE OF PLANS BUILDING CONDITIONED FLOOR AREA CLIMATE ZONE 8.22.07 83,806sq.Ft. 15 BUILDING TYPE [X] NONRESIDENTIAL ❑ HIGH RISE RESIDENTIAL ❑ HOTEL/MOTEL GUEST ROOM ❑X CONDITIONED SPACES UNCONDITIONED SPACES ❑ INDOOR & OUTDOOR SIGNS PHASE OF CONSTRUCTION [X] NEW CONSTRUCTION ❑ ADDITION ❑ ALTERATION METHOD OF LIGHTING ❑ COMPLETE BUILDING ❑X AREA CATEGORY ❑ TAILORED ❑ PERFORMANCE COMPLIANCE ❑ COMMON LIGHTING STATEMENT OF COMPLIANCE This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations. This certificate applies only to building lighting requirements. The documentation preparer hereby certifies that the documentation is acNate ate and c DOCUMENTATION AUTHOR SIGNATURE DATE Glynnis Cassan _ 01 to -11 8 The Principal Lighting Designer hereby certifies that the proposed bui din de gn Wresented in this set of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this permit application. The proposed building has been designed to meet the lighting requirements contained in Sections 110, 119, 130 - 132, 146, 148 & 149 of Title 24, Part 6. ❑ The plans & specifications meet the requirements of Part 6 (Sections 10-103a). ❑ The installation certificates meet the requirements of Part 6 (10-103a 3). ❑ The operation & maintenance information meet the requirements of Part 6 (10-103c). Please Check One: (These sections of the Business and Professions Code are printed in full in the Nonresidential Manual.) ❑ I hereby affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code to sign this document as the person responsible for its preparation; and that I am licensed in the State of California as a civil engineer or electrical engineer, or I am a licensed architect. ❑ I affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code by Section 5537.2 or 6737.3 to sign this document as the person responsible for its preparation; and that I am a licensed contractor performing this work. ❑ I affirm that I am eligible under the exemption to Division 3 of the Business and Professions Code to sign this document because it pertains to a structure or type of work described as exempt pursuant to Business anProfessions Code Sections 5537, 5538 and 6737.1. PRINCIPAL LIGHTING DESIGNER - NAME SIGNA�7/ DATE LIC. # Dwa ne G. Miller �—� l0 2°• 10 E 1504 - LIGHTING MANDATORY MEASURES Indicate location on plans of Note Block for Mandatory Measures _ LIGHTING COMPLIANCE FORMS & WORKSHEETS Check box if worksheet is included IXILTG-1-C, Parts 1 of 4 and 2 of 4: Certificate of Compliance. Part 1 of 4 and 2 of 4 are required for all submittals IXILTG-1-C, Part 3 of 4: Certificate of Compliance. Part 3 of 4 submittal is required only if Control Credits are claimed IxILTG-1-C, Part 4 of 4: Certificate of Compliance. Part 4 of 4 submittal is required when lighting controls are installed IxILTG-2-C: Indoor Lighting Schedule CILTG-3-C: Portable Lighting Worksheet IXiLTG-4-C: Lighting Controls Credit Worksheet IxILTG-5-C: Indoor Lighting Power Allowance 1- ILTG-6-C: Tailored Method Worksheet L I LTG -7-C: Room Cavity Ratio Worksheet C -I LTG -8-C: Common Lighting Systems Method Worksheet I ILTG-9-C: Line Voltage Track Lighting Worksheet -- - ---- ---------- ---- - - ---- - — ------ ---- -- --- --- -- - - EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page. 94 of 146 CERTIFICATE OF COMPLIANCE (Part 2 of 4) LTG -1 -CI PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 INSTALLED INDOOR LIGHTING POWER FOR CONDITIONED AND UNCONDITIONED SPACES INSTALLED LIGHTING, UNCONDITIONED SPACES (From LTG -2-C) 1,690 LIGHTING CONTROL CREDIT, UNCONDITIONED SPACES (From LTG -4-C) .0 UNCONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 1,690 ALLOWED INDOOR LIGHTING POWER FOR CONDITIONED SPACES ❑ COMPLETE BUILDING METHOD (From LTG -5-C) ALLOWED ❑X AREA CATEGORY METHOD (From LTG -5-C) WATTS ❑ TAILORED METHOD (From LTG -5-C) ALLOWED LIGHTING POWER 89,457 ALTERNATE COMPLIANCE ❑ PERFORMANCE METHOD ❑ COMMMON LIGHTING SYSTEM (From LTG -8-C) ALLOWED INDOOR LIGHTING POWER FOR UNCONDITIONED SPACES From LTG -5-C) 1,317 MANDATORY INDOOR AND DAYLIGHTING AUTOMATIC CONTROLS CONTROL LOCATION CONTROL CONTROLTYPE (Room #) IDENTIFICATION (Auto Time Switch, Dimming, etc.) Check if NOTE TO SPACE CONTROLLED Daylighting FIELD INSTALLED WATTS INSTALLED LIGHTING, CONDITIONED SPACES (From LTG -2-C) 76,196 PORTABLE LIGHTING (From LTG -3-C) 26 LIGHTING CONTROL CREDIT, CONDITIONED SPACES (From LTG -4-C) 888 CONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 75,334 INSTALLED LIGHTING, UNCONDITIONED SPACES (From LTG -2-C) 1,690 LIGHTING CONTROL CREDIT, UNCONDITIONED SPACES (From LTG -4-C) .0 UNCONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 1,690 ALLOWED INDOOR LIGHTING POWER FOR CONDITIONED SPACES ❑ COMPLETE BUILDING METHOD (From LTG -5-C) ALLOWED ❑X AREA CATEGORY METHOD (From LTG -5-C) WATTS ❑ TAILORED METHOD (From LTG -5-C) ALLOWED LIGHTING POWER 89,457 ALTERNATE COMPLIANCE ❑ PERFORMANCE METHOD ❑ COMMMON LIGHTING SYSTEM (From LTG -8-C) ALLOWED INDOOR LIGHTING POWER FOR UNCONDITIONED SPACES From LTG -5-C) 1,317 MANDATORY INDOOR AND DAYLIGHTING AUTOMATIC CONTROLS CONTROL LOCATION CONTROL CONTROLTYPE (Room #) IDENTIFICATION (Auto Time Switch, Dimming, etc.) Check if NOTE TO SPACE CONTROLLED Daylighting FIELD CERTIFICATE OF COMPLIANCE (Part 3 of 4) LTG -1-C. PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 CONTROLS FOR CREDIT IN CONDITIONED AND UNCONDITIONED SPACES CONTROL LOCATION (Room # or Dwg. #) CONTROL IDENTIFICATION CONTROL TYPE (Occupant, Daylight, Dimming, etc.) LUMINAIRES CONTROLLED NOTE TO FIELD TYPE # OF LUMINAIRES CHK-IN/ Dimming - Manual Y 3 2RECCEPT. IMAGING WAIT 100/101 Dimming - Manual Y 3 IMAGING WAIT 100/101 Dimming - Manual H 2 LAB WAIT/CHK-IN Dimming- Manual H 5 MEN'S RN&AIT 119 Dimming - Manual H 2 WOMEN'S SUB -WAIT Dimming- Manual H 2 RADJOppf�11Nl/1G. WAIT Dimming- Manual H 4 RAD./ONCWAIT Dimming - Manual AA 5 CT & XO 013 -WAIT Dimming - Manual H 4 URG. CARE��144100-01/103- Dimming- Manual K 4 CONFRENCE A210 Dimming - Manual P/P1 19 CONFRENCE A210 Dimming - Manual FF/FF1 2 CONFRENCE A204 Dimming - Manual F 2 OFFICE A202 Dimming - Manual F 3 OFFICE A205 Dimming - Manual F 3 WAITING A200/ REC. Dimming- Manual F 5 WAITING REC. Dimming- Manual R 5 2A200/ REC. B20g'?fpW2K/COPY Dimming- Manual F 1 OFFICE CONSULT C205 Occ Sensor - — 250 s ft M 2 OFFICE C201 Occ Sensor - — 250 s ft A/A1 2 TECH WORK B212 Occ Sensor - — 250 s ft A/A1 2 DRESSING 8209 Dimming - Manual W 1 DRESSING B208 Dimming - Manual W 1 HALL B203 204, 211 Dimming - Manual F 4 WAITING 8200 Dimming - Manual P/P1 1 WAITING 8200 Dimming - Manual F 4 Dimming- Manual P/P1 5 B3p�3DgHAL6L 321 324 PHYSfC%9ARI2'53'&HM Occ Sensor - — 250 s ft A/A1 1 PHYSICIBAfgV2'S2 OFFICE Occ Sensor - — 250 s ft A/A1 1 PHYSICIAN2'Sp OFFICE Occ Sensor - — 250 s ft A/A1 1 HALL 3N324A 32413 Dimming - Manual F 4 EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:96 of 146 1 CERTIFICATE OF COMPLIANCE (Part 3 of 4) LTG - PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 CONTROLS FOR CREDIT IN CONDITIONED AND UNCONDITIONED SPACES CONTROL LOCATION (Room # or Dwg. #) CONTROL IDENTIFICATION CONTROL TYPE (Occupant, Daylight, Dimming, etc.) LUMINAIRES CONTROLLED NOTE TO FIELD TYPE # OF LUMINAIRES HALL Dimming - Manual P/P1 5 ggp4 1 g2g 33g RESIb3ENT'S20FFICE Dimming - Manual F 2 RESIDE�gI3g�5OFFICE Occ Sensor - <= 250 sqft M 2 PHYSIC OFFICE Occ Sensor - — 250 s ft A/A1 1 FA33N3'S2 PHYSICIA3N OFFICE Occ Sensor - <= 250 s ft A/A1 1 9S PHYSICIgANSpp OFFICE Occ Sensor - <= 250 s ft A/A1 1 PHYSICf,4 19 OFFICE. Occ Sensor - <= 250 s ft A/A1 1 PHYSICIAAgN 9 OFFICE Occ Sensor - <= 250 s ft A/A1 1 PHYSICIBA3N 9 OFFICE Oce Sensor - <= 250 s ft A/A1 1 PHYSICIgAgN3'S7 OFFICE Occ Sensor - <= 250 s ft A/A1 1 REC/CPY33/��KRK 300- Dimming- Manual F 3 REC/CPY3R ORK 300- Dimming- Manual F 2 PHYSICIgA3N0'S3 OFFICE Occ Sensor - <= 250 s ft A/A1 1 ADMIN. OFFICE A302 Occ Sensor - <= 250 s ft A/A1 2 WAITING 322 Dimming - Manual F 2 WAITING 322 Dimming - Manual P/P1 2 WAITING 321,HALL 312 Dimming - Manual Z 6 WAITING 321,HALL 312 Dimming - Manual P/P1 2 PHYSICIAN'S OFFICE Occ Sensor - <=250 s ft A/A1 1 PHYSICI��A;3gg 9 OFFICE Occ Sensor - <=250 s ft A/A1 1 TREADMILL D312 Dimming - Manual F 3 OFFICE D304 Occ Sensor - <= 250 s ft SS 3 OFFICE D304 Dimming - Manual F 3 WAITING D300 Dimming - Manual PP 21 PHARMACY WAITING Dimming - Manual JJ 10 PHARMARWAITING Dimming - Manual H 1 PHARMA� WAITING Dimming - Manual AA 8 100 CERTIFICATE OF COMPLIANCE (Part 4 of 4) LTG-1-C PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 Designer: This form is to be used by the designer and attached to the plans. Listed below are all the acceptance tests for lighting systems. The designer is required to check the boxes by all acceptance tests that apply and list all equipment that require an acceptance test. If all equipment of a certain type requires a test, list the equipment description and the number of systems to be tested in parentheses. The NJ number designates the Section in the Appendix of the Nonresidential ACM Manual that describes the test. Also indicate the person responsible for performing the tests (i.e. the installing contractor, design professional or an agent selected by the owner). Since this form will be part of the plans, completion of this section will allow the responsible party to budget for the scope of work appropriately. Building Departments: Before an occupancy permit is granted for a newly constructed building or space, or a new lighting system system serving a building or space is operated for normal use, all control devices serving the building or space shall be certified as meeting the Acceptance Requirements for Code Compliance. In addition a Certificate of Acceptance, LTG-1-A, Forms shall be submitted to the building department that: A. Certifies plans, specifications, installation certificates, and operating and maintenance information meet the requirements of§10-103(b) and Title 24 Part 6. Test Descri tion Test Performed By: ❑ LTG-2-A: Lighting Control Acceptance Document - Occupancy Sensor Acceptance - Manual Daylight Controls Acceptance - Automatic Time Switch Control Acceptance Equipment requiring acceptance testing ❑ LTG-3-A: Automatic Daylighting Controls Acceptance Document Equipment requiring acceptance testing EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:98 of 146 1 INDOOR LIGHTING SCHEDULE (Part 1 of 2) LTG -2-C I PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 INSTALLED LIGHTING POWER FOR CONDITIONED SPACES Luminaire Lamps/Ballasts Installed Watts C D E F G H I J r Cc na 'O < N -a O C7 C C .� 01 a: m-0 3N v.a Dm -o Sat7. T. -o m m Name Type Description m `� ° y m `, o m Yes No En A (2) 4 ft Fluorescent T8 Energy Savings Elec F32T8 2 30 1.0 54.0 X 7 378 A (3) 4 ft Fluorescent T8 Energy Savings Elec 3 3 30 1.0 79.0 X 16 1,264 A/A1 (2) 4 ft Fluorescent T8 Energy Savings Elec 32T8 2 30 1.0 54.0 X 8 432 A-1 (3) 4 ft Fluorescent T8 Energy Savings Elec =32T8 3 30-11.0079.0 X 118 9,3.2_.2 Al (2) 4 ft Fluorescent T8 Energy Savings Elec 2T8 2 30 1.0 54.0 X 2 108 Al (3) 4 ft Fluorescent T8 Energy Savings Elec 32 3 30 1.0 79.0 X_ 24 1,896 A2 F) 4 ft Fluorescent T8 Energy Savings _ lec =32T8 2 30 1.0 54.0 X 3 16_2 A2 (3) 4 ft Fluorescent T8 Energy Savings Elec 318 3 30 1.0 79.0 X 8 632 A2/A3 (3) 4 ft Fluorescent T8 Energy Savings Elec 32T8 3 30 1.0 79.0 X 34 2,686 A4/A5 (3) 4 It Fluorescent T8 Energy Savings Elec 2T8 3 30 1.0 79.0 X 4 316 AA F) 13w Compact Fluorescent Triple 4 Pin lec - FM 13W/GX24q-1 2 13 2.0 25.0 X _ 4 100_ AA 35w Low Voltage Halogen hft-La _ 1 35 1.0 38.0 X 17 646 B (2) 2 ft Fluorescent T8 Elec 17Ta 2 17 1.0 33.0 X 1 33_ B (2) 2ft Fluorescent T8 Rapid Start _ �17T 2 17 1.0 45.0_ X 1 45 61 (2) 2 ft Fluorescent T8 Elec 17TH 2 17_ 1.0 33.0 X 33 61 (2) 2ft Fluorescent T8 Rapid Start _1 1778 2- 17 1.0 45.0 2 90_ BB (1) 13w Compact Fluorescent Triple 4 Pin _X Alec FM 13W/GX244 -1 1 131.0 14.0 X 12 168 C (2) 4 ft Fluorescent T8 Energy Savings Elec 732T -B--2- 30 1.0 54.0 X 16 864 C/C1 (2) 4 ft Fluorescent T8 Energy Savings Elec2T 2 30 1.0 54.0 X 22 1.188 C1 (2) 4 ft Fluorescent T8 Energy Savings __. Elec =32T8 --2-301.0 54.0 X ----34- ._ 1,836 CC 1.3W LED PLEXINEON 3-VVatt_LEp 1 1 1.02-.0X 13 26 (1) 18w C ompact Fluorescent Quad 2 Pin _ _..- FQ18W/G24d_2 1 1_8 1.0 25.0 5 1.25_ D (1) 3 ft Fluorescent T8 Elec _X -------F25 TH 1_ 25 1.0__2.7_.0__X_ 1 27 D/D1 (1) 26w Compact Fluorescent Triple 4 Pin Elec --.- ---_- F-TR26W/GX24q-3 -----1 26 1..0 _ 28.0 -X -- ---9 ----252 PAGE TOTAL 22,629 BUILDING TOTAL (sum of all pages) 76,196 PORTABLE LIGHTING (From LTG -3-C) CONTROL CREDIT (From LTG4-C) f _ _ 88-8 ADJUSTED ACTUAL WATTS 7-5-,-33 4 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 99 of 146 INDOOR LIGHTING SCHEDULE (Part 1 of 2) LTG -2-C I PROJECT NAME DATE Eisenhower Ambulatory Care Center I 10/17/2008 INSTALLED LIGHTING POWER FOR CONDITIONED SPACES Luminaire Lamps/Ballasts Installed Watts C -D--F E F G H I J r �v cWC: X33 r mo`< aEr- �.�3 c �,a`� O C7 r 3 c ag w 03 CD -0 �Nm ° 3m � �^m �'� �m L v, =m v�=5 x�v Name Type Description a m `, m nR ° m a� Yes No m a -4 a D/D1 F) 4 ft Fluorescent T8 Energy Savings F) F32T8 2 30 1.0 54.0 X 45 2,430 DD (1) 50w Lng Cmpt T5 Fluorescent Twin Elec 0W/2 1 50 1.0 54.0 X 1 54 DD 250w Surface Mount Incandescent 50W 1 250 250.0 X 1 250 DD 35w Low Voltage Halogen Mag 5 Watt Lamp 1 35 1.039.0 X 3 117 F (1) 3 ft Fluorescent T8 Elec _F2- 1 25 1.0 27.0 X 7 189 F 35w Low Voltage Halogen 12/attL_a_m. p 1 35 1.0 38.0 X 46 1.748 F 35w Low Voltage Halogen Mag 5 Watt Lamp 1 35 1.0 39.0 X 1 39 F/F1 (1) 26w Compact Fluorescent Quad 2 Pin Q26 -W/ -Q2 1 26 1.0 37.0 X 21 777 F/F1 (1) 32w Compact Fluorescent Triple 4 Pin Elec CFTR32WGX24q-3 1 32 1.0 35.0 X 40 1 400 FF (1) 24w/27w Lng Cmpt T5 Fluorescent Twin T24W/2(3-11 1 24 1.0 32.0 X 28 896 FF/FF1 F) 26w Compact Fluorescent Triple 4 Pin FTR26W/GX24g-3 2 26 1.055.0 X 2 110 G (1) 26w Compact Fluorescent Quad 2 Pin EQ261N1G24d- 1 26 1. 1 37 G 35w Low Voltage Halogen Mag ----3-7.QX -2 _5 Watt damp 1 _35 1.0 39.0 X 33 1 287 G/G1 (1) 26w Compact Fluorescent Quad Pin EQ26W/_G24d-3 1 26 1.0 37.0 X 10 370 G/G1 P) 26w Compact Fluorescent Triple 4 Pin lee FTR26W/GX24 -3 1 _ 26 1.0 28.0 X 79 2.212 G1 (1) 26w Compact Fluorescent Quad 2 Pin F_Q26WG24d-3 1 26_ 1.0_ 37.0 X 4 148 GG (1) 13w Compact Fluorescent Triple 4 Pin Alec FM 13W/GX24q-1 1 13 1.01 14.0 X _8 112 GG (2) 13w Compact Fluorescent Quad 2 Pin Ql3WLG24d- 2 13 2.0 36.0 X 17 612_ H (2) 36w/39w Lng Cmpt T5 Fluorescent Twin Elec T36W/.2G11 2 36 1.0 70.0 X 2 140 H 35w Low Voltage Halogen --R/-Hl - - - 5 watt_)_amp 1---.,-35 10 38.0 X 20 _ 760 (1) 26w- Compact Fluorescent Triple 4 Pin F_TR26WLGX24g-3 1 26_1.0 37.0 _X 7 259_ HH (1) 28w Linear Fluorescent T5 Elec 28T5 _ 1_ 28 1_.0_ 30.0 X 81 2.430 J Haln 35w Low Voltage oge - ___ . _-g-- _5 watt Lamp _ 35 1.0_38.0,_X___ 8 304 J 35__ H__al_ w Low Voltage ogen Ma --1 35 -Watt Lamp ------1a __.____35_-_1.0 _39.0 _X 1-0-- 390 PAGE TOTAL 17,071 BUILDING TOTAL (sum of all pages) _ 76,196 PORTABLE LIGHTING (From LTG -3-C) ---------26 CONTROL CREDIT (From LTG-4-C)H88 ADJUSTED ACTUAL WATTS 1--7-533 4 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:100 of 146 INDOOR LIGHTING SCHEDULE (Part 1 of 2) LTG -2-C PROJECT NAME Eisenhower Ambulatory Care Center DATE10/17/2008 INSTALLED LIGHTING POWER FOR CONDITIONED SPACES Luminaire Lamps/Ballasts Installed Watts C D E F G H I J =c B'�a 115 CD r a� CD -0 =�.-6 �mm 'O C �v° c �.-a CD 3'mv N vm C7 5'03 -n zy Xvm N (D Name Type Description _2 m `� `� ° � Yes No W `@ �- a J/J1 (1) 26w Compact Fluorescent Quad Pin CFQ26W/G24d-3 1 26 1.0 37.0 X 24 888 J/J1 (1) 26w Compact Fluorescent Triple 4 Pin Elec FTR26W/Gxz4�_ 1 26 1.0 28.0 X 166 4,648 J1 (1) 26w Compact Fluorescent Quad 2 Pin FQ26W/G24d-3 1 26 1.0 37.0 X 4 148 JJ (1) 14w Linear Fluorescent T5 Elec 14T5 1 14 1.0 18.0 X 10 180 JJ 50w Low Voltage Halogen 5MaKLaM_p____1 50 1.0 54.0'X 4 216 K (2) 36w/39w Lng Cmpt T5 Fluorescent Twin . 136 1W 2_G 2 36 1.0_ 66.0 X 4 264 K 35w Low Voltage Halogen 5 watt Lam 1 35 1.01 38.0 X 4 152 K/K1 (1) 18w Compact Fluorescent Triple 4 Pin Elec EMW�GX24sl _ 1 18 1.0 21.01 X 12 252 KK (1) 32w Compact Fluorescent Triple 4 Pin - Elec _ FTR32WGX24q-3 132 1.0 35.0 X 2 70 L (1) 26w Compact Fluorescent Quad 2 Pin F-WOWMA -3 1 26_ 1.0 37.0 - X 6 222 L 50w Low Voltage Halogen o watt Lamp 1 50 1.0__. 54.0 X 6 324 L L - 1 12 12.0 X 2 24 UL1 P) w Compact Fluorescent Triple 4 Pin lec__ _ _ FTR26W/GX24g 3 1 26 1.0 28.0 2 56 L/L1 (2) 28w Linear Fluorescent T5 Elec _X ._ sT� 2 28 1.0 60.0 X L1 (1) 26w Compact Fluorescent Quad 2 Pin _2_____T20 _FQ26W/G24d-3 1 26 1.0 37.0 X 23_ 851 I.A1 (1) 26w Compact Fluorescent Quad 2 Pin _ _ __ .E02.6_W1G24d_3 26 1-.0__-37,0 X 4 148 L A2 Q__u_-___ (1) 26w Compact Fluorescent ad 2 Pin _1 _ FQ26W-/G24d-3 1 26 1.0 37.0 X 8 296 LA3 TOKISTAR XENON LINEAR COVE - . - - -LIGHT V_ 1 5 1.0 5.0 X 56 280 LL (2) 24w Linear Fluorescent T5 HO Elec _2 _ H 2 24 1.0 52.0 X 104 LL (2) 39w Linear Fluorescent T5 HO Elec _2 _39T5 2 39 1.0act 8_5.0_X__ 170 M (1) 26w CompFluorescent Quad 2 Pin _____2_ _ _FQ26W/G2_4d-_ 1 26 1.037.0 X 26 962 M (1) 36w/39w Lng Cmpt T5 Fluorescent -twin _ ___T36=2G11 1-361.0 51.0 X 3 153' M (2) 28w Linear Fluorescent T5 Elec --- --28T5 2 28 1.0 X 4 240 _60.0 _ --_---- --------___- _ - -1 12 1-.0 _-_12.0- _X _7_-- _84 PAGE TOTAL 10,8521 BUILDING TOTAL (sum of all pages) 76,196 PORTABLE LIGHTING (From LTG -3-C) � __26 CONTROL CREDIT (From LTG -4-C) 858 ADJUSTED ACTUAL WATTS 75,3341 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Paue:101 of 146 INDOOR LIGHTING SCHEDULE (Part 1 of 2) LTG -2-C I PROJECT NAME DATE � Eisenhower Ambulatory_ Care Center 10/17/2008 INSTALLED LIGHTING POWER FOR CONDITIONED SPACES Luminaire Lamps/Ballasts Installed Watts C D E F G H I J _ N r 'ANN (D 'O 5-0 Er N CDD) u! �'tnQ (D �'N� N •'S co dm C () - �Oz N - x - (D Name -M/Ml Type Description -.-0 - Yes No CD (n (2) 28w Linear Fluorescent T5 Elec F28T5 2 28 1.0 60.0 X 1 23 1.3801 M1 (1) 26w Compact Fluorescent Quad 2 Pin 2�I!G_2A" 1 26 1. 0 37.0 X 2 74 MM (1) 55w Lng Cmpt T5 Fluorescent Twin Elec T55W/2G11 1 55 1.0 58.0 X 1 58 N (1) 26w Compact Fluorescent Quad 2 Pin . FQ26W/G24d-3 1 261 1.0 37.0 X 1.073 N (2) 13w Compact Fluorescent Triple 4 Pin _29. - Elec FM13W/G�2�q-1 2 13 2.0 25.0 X 27 675 N (2) 28w Linear Fluorescent T5 Elec _z T 2 28 1.0 60.0 X 8 480 N/N1 (2) 28w Linear Fluorescent T5 Elec 28T5 2 28 1.0 60.0 X 62 N1 (1) 26w Compact Fluorescent Quad 2 Pin -.3,720 -FQ2 1 26_ 1.0 37.0 X 2 74 NN 50w Low Voltage Halogen -(1)26w o watt Lamp 150 1.0 54.0 X 16 864 P/P1 Compact Fluorescent Quad 2 Pin 2_6WLG24d 1 26 1.0 37.0 6 2_22 P/P1 35w Low Voltage Halogen _X 51 5 watt Lamp 135 1.0 38.0 X 36 1.368 (1) 26w Compact Fluorescent Quad 2 Pin - 26WLG24 - 1 26 1.0 37.0 X 8 PP COLOR KINETICS QLX 4W/LINEAR ____2W FOOT _ _ 1 4_ 5.0 X 21 105 Q (2) 13w Compact Fluorescent Twin 2 Pin -- - F-TJ3- r/Gx2 2 13 2.0 34.0 X 5 170_ Q 25w LED _ 5 Watt LED 1 5 1.0 2.5.0 3 75 Q 50w Low Voltage Halogen _ _X --5G-Watt Lamp 1 50 1.0 54.0 X 13-----702- Q 50w Low Voltage Halogen Mag _ o watt Laam 1 50 1.0 2 55.0 X 110 QQ 35w Low Voltage Halogen - 5 watL amp 1 35 1.0 38.0 X 2 76 R (1) 18w Compact Fluorescent Triple 4 Pin - Elec QF_M1 a\8 MX 24-q-2 1 18 1.0 21.0 X 10 210 - R (1) 18w Long Compt Fluorescent T5 Twin Pm Elec __- T18W/2G11 1 18 24._0_ X 20 480_ R 35w Low Voltage Halogen _1.0 5 Watt -Lamp _ 1 35 1.038.0 X 13 _ 494 R R 1 4 4.4 364 14602- S (1) 24w/27w Lng Cmpt T5 Fluorescent _X ttwin Elec __ -____ T24W/2G11 1_ 24 1.0 27.0 X 1._0 270_ S (1) 26w Compact Fluorescent Quad 2 Pin _ -- -------------__-- FQ2sw�Gz4d 1___-_261.0 37.0_X_ - -- 2 --__-74 PAGE TOTAL 14,652 __- BUILDING TOTAL (sum of all pages) 76,196 PORTABLE LIGHTING (From LTG -3-C) _. 26 CONTROL CREDIT (From LTG -4-C) L 888 ADJUSTED ACTUAL WATTS 75,334 EnergyPro 4.4 by EnergySoft _ User Number: 5678 Job Number: 07.0021 Page: 102 of 146 INDOOR LIGHTING SCHEDULE (Part 1 of 2) LTG -2-C I PROJECT NAME DATE l Eisenhower Ambulatory Care Center 10/17/2008 INSTALLED LIGHTING POWER FOR CONDITIONED SPACES Luminaire Lamps/Ballasts Installed Watts C D E F G H I J N C 1U C 3 B C N'O < C 111 I E. N B C C '6 < 0 _ n r C Z 5. C CC� <,N.. N0 5�CD 3 ;* �.m+� �(�# Cn •� ,- SR x=N Name Type Description m o m Yes No m a S S S 1 2 2.0 X 9 18 SS (1) 13w Compact Fluorescent Triple 4 Pin Elec 13W/GX24q-1 1 13 1.0 14.0 X 3 42 T (2) 13w Compact Fluorescent Triple 4 Pin Elec FM 13W/GX24 -1 2 13 2.0 25.0 X 45 1,125 T 3w LED Watt LED 1 3 1.0 6.0 X 14 84 T 50w Low Voltage Halogen O Watt_L 1 50 1.01 54.0 X 2 108 TT 50w Low Voltage Halogen wasi�Lamp 1 50 1.054.0 X1 5 270 U (1) 18w Compact Fluorescent Quad 2 Pin F 18W/G24d-2 1 18 1.0 25.0 X 12 300 U (1) 21w Linear Fluorescent T5 Elec 1T 1 21. 1.0 27.0 X 75 2.025 U 60w Surface Mount Incandescent ow 1 60 60.0 X 3 180 UC (1) 28w Linear Fluorescent T5 Elec 8� 1 28 1.0 30.0_X_ 2 60 UU 42w Low Voltage Halogen 2 watt Lamo 1 42 1.0 45.0 X 2 --90 V 75w Low Voltage Halogen aft Lam 1 75 1.0 80.0 X 6 480 V v - - 60 23 1.0 1 1.380_ W 50w Low Voltage Halogen _X att-La _ 150 1.0 54.0 X 13 702 W (1) 36w/39w Lng Cmpt T5 Fluorescent Twin Elec T36W/2G11 1 36 1.0 37.0 X_ 10 370 W 20w Low Voltage Halogen 0 Watt_Lamp 1---_2,0-_1.0_23.0_X 2 __46 W 5w LED Watt LED 1 5 1.0 8.0 X 27 216_ X 100w Surface Mount Incandescent 10DW 1 100 100.0 X 1 100 X 35w Low Voltage Halogen _ -(2)2 5_Watt Lamp 1 _ 35 1.0 38.0__X__ 3 114 X/X1 Fluorescent ft T8 Elec _ 17T8 2 1.033.0 X 132 Y 35w Low Voltage Halogen -17 _4 ._ 3.5. -Watt -Lamp ---1 35 1.0 38.0 X 6 Y 35w Low Voltage Halogen Mag .2.28 ____ 5 Watt Lamp 1 35_ 1.0_39 0 12 468. YY 50w Low VoltageHalogen _X_ 50 -Watt -Lamp Lamp _ 1 _ 50 1_.0 54.0 _X 3 162 Z (1) 18w Compact Fluorescent Triple 4 Pin al___ 1.01-25.0.-X 1--56-- 1 ,400 PAGE TOTAL F 10,100 BUILDING TOTAL (sum of all pages) 176,196 PORTABLE LIGHTING (From LTG -3-C) CONTROL CREDIT (From LTG -4-C) _____ _ _888 ADJUSTED ACTUAL WATTS [---75,-3 34 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 103 of 146 INDOOR LIGHTING SCHEDULE (Part 1 of 2) LTG -2-C I PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 INSTALLED LIGHTING POWER FOR CONDITIONED SPACES Luminaire Lamps/Ballasts Installed Watts C D E F G H I J Name Type Description �r �° � cis' 3 3 vN W m `, ° v� SCD ctpc 3.in 3 �� m `, ° c 3 o �N v m' CD vm cn Yes No r = Z c 5o !2 Cr `@° G)��» x N M CD CL Z P) 4 ft Fluorescent T8 Energy Savings lec F32T8 1 30 1.01 29.0 X 1 18 522 Z 42w Low Voltage Halogen aitLa 1 42 1.0 45.0 X 6 270 ZZ XENON CASEWORK LIGHT (TOTAL) XENON LAMP 1 100 1.0 100.0 X 1 100 PAGE TOTAL 8921 BUILDING TOTAL (sum of all pages) 76,19 66 ---------- PORTABLE LIGHTING (From LTG -3-C) 261 CONTROL CREDIT (From LTG -4-C) H8H ADJUSTED ACTUAL WATTS [--75,3 34 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 104 of 146 INDOOR LIGHTING SCHEDULE (Part 2 of 2) LTG -2-C] PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 INSTALLED LIGHTING POWER FOR UNCONDITIONED SPACES Luminaire Lamps/Ballasts Installed Watts C D E F G H I J Name Type Description 0 -03 59a c 0Z 3'yQ N 6 � CD m o 3 -oma V� c am= 3. iv 3 3�a W.0 CD m ° 3.-0 Sc� 0 N `° 59 C7 cm G. Yes No r 3• c v°,a — 59 N x 59 .-m (D n D/D1 _ �2e4 It Fluorescent T8 Energy Savings F32T8 2 30 1.0 54.0 X 2 108 F1 (1) 26w Compact Fluorescent Quad 2 Pin FQ2sAMG2 1 26 1.0 37.0 X 15 555 P1 (1) 26w Compact Fluorescent Quad 2 Pin FQ26W/G24d-3 1 26 1.0 37.0 X 2 74 U _ (1) 18w Compact Fluorescent Quad 2 Pin FQ18W/G24d-2 1 18 1.0 25.0 X 2 50 Z (1) 4 ft Fluorescent T8 Energy Savings Electo 1 30 1.0 29.0 X 3 87 ZZ (1) 36w/39w Lng Cmpt T5 Fluorescent Twin T36w/2G 1 1 36 1.0 51.0 16 816 _X PAGE TOTAL BUILDING TOTAL (sum of all pages)1 ,690 CONTROL CREDIT (From LTG -4-C) O ADJUSTED ACTUAL WATTS [____1_,690. 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 105 of 146 LIGHTING CONTROLS CREDIT WORKSHEET (Part 1 of 2) LTG -4-C CONTROL CREDITS FOR CONDITIONED SPACES PROJECT NAMEDATE _ Eisenhower Ambulatory Care Center __.__10/17/2008 A B C D E I F I G H I J ROOM # DAYLIGHTING CONTROL ZONE ID LIGHTING ROOM WATTS OF LIGHTING CREDIT WINDOW SKYLIGHT CONDITIONED CONTROL PLAN AREA WALL GLAZING EFFECTIVE CONTROL ADJUST. WATTS AREAS DESCRIPTION REF. (SF) RATIO VLT APERTURE' LIGHTING FACTOR' (H X 1) CHK-FN/EPT. 102//106 Dimming -Manual Y 346 114 0.10 11 IMAGING WAIT 100/101 Dimming - Manual Y 1,008 114 0.10 11 IMAGING WAIT 100/101 Dimming - Manual H 1,008 76 0.10 8 LAB WAIT/CHK-IN 100/101 Dimming - Manual H 793 190 0.10 19 MEN'S SUB -WAIT 119 Dimming - Manual H 132 76 0.10 8 WOMEN'S SUB -WAIT 2 Dimming - Manual H 154 76 0.10 8 RAD•100/101WAIT Dimming -Manual H 506 152 0.10 15 RAD•100/101WAIT Dimming -Manual AA 506 190 0.10 19 CT & XRAY SUB-WAIT Dimming - Manual H 233 152 0.10 15 RG. CARE 00- 01/103-04 Dimming -Manual K 1 364 152 0.10 15 CONFRENCE A210 Dimming - Manual P/P1 2,406 722 0.10 72 CONFRENCE A210 Dimming - Manual 2 406 110 0.10 11 CONFRENCE A204 Dimming - Manual F 352 76 0.10 8 OFFICE A202 Dimming - Manual F 130 114 0.10 11 OFFICE A205 Dimming - Manual F 112 114 0.10 11 -WAITTN 20 0�7 RFC. -D mming - I�ianua A� F 519 190 0.10 19 WAITIN A 0 00/ REC. 201 Dimming -Manual R 519 120 0.101.2 REC. 6262 2K/COPY Dimming - Manual F 154 38 0.10 4 OFFICE CONSULT C205 Occ Sensor - - 250 sgft M_ 111 120 0.20 24 OFFICE C201 Occ Sensor <=250 A/A1 143 158 0.20 32 TECH WORK 8212 Occ Sensor - - 250 120 158 0.20 32 -Sart-_A/Al _ DRESSING 8209 Dimming - Manual W 64 23 0.10 2 DRESSING B208 Dimming - Manual W 56 23 0.10 2 HALL B203, 204, 211 Dimming - Manual F 3_28 1.52 0.10 1.5 WAITING 8200 Dimming - Manual P/P1 315 38 0.10 4 WAITING B200 - Dimming - Manual F 315 15_20.10 15 HALL B302,309,316,321,324p/pl --- -- Dimming -Manual P/P1 1 324 190 0.10 19_ PHYSICIAN'S OFFICE -- - 8323 _- Occ Sensor - <= 250 _ --Soft - A/A1 _ _ 79 -_- 0.20 _ 16 PHYSICIAN'S FFICE O Occ Sensor - - 250 ___ _90 _ 0.20 ____B322 ----sgft__ -A/A1.-----92 - --- 79,____ -16 1) From Equation 146-A 2) From Table 146-A PAGE TOTAL 454 BUILDING TOTAL _888.. Enter in LTG -2-C: Lighting Control Credit 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 106 of 146 LIGHTING CONTROLS CREDIT WORKSHEET (Part 1 of 2) LTG -4-C CONTROL CREDITS FOR CONDITIONED SPACES PROJECT NAME DATE Eisenhower Ambulatolry Care Center 10/17/2008 A B C D E F G H I_ J ROOM # DAYLIGHTING CONTROL ZONE ID LIGHTING ROOM WATTS OF LIGHTING CREDIT WINDOW SKYLIGHT CONDITIONED CONTROL PLAN AREA WALL GLAZING EFFECTIVE CONTROL ADJUST. WATTS AREAS DESCRIPTION REF. (SF) RATIO VLT APERTURE' LIGHTING FACTOR' (H X 1) PHYSICIAN'S OFFICE Occ Sensgft- <= 250 A/A1 80 79 0.20 16 HALL 324,324A,324B Dimming - Manual F 764 152 0.10 15 HALL A304,315,322,329,336 Dimming - Manual P/P 1 1,154 190 0.10 19 RESIDENT'S OFFICE A3 5 Dimming - Manual F 138 76 0.10 8 RESIDEA3 5OFFICE Occ Sensor sgft <- 250 M 138 120 0.20 24 PHYSICIAN'S B332 Occ Sensor <= 250 A/A1 86 79 0.20 16 PHYSICIAN'S S OFFICE A Occ Sensor - <= 250 A/A1 $$ 79 0.20 16 PHYSICIAN'S A310 OFFICE Occ Sen <- 250 sgft A/A1 88 79 0.20 16 PHYSICIAN9 OFFICE A Occ Sensor sgft <- 250 A/A1 86 79 0.20 16 PHYSICIAN'S 0 Occ Sensor <= 250 A/A1 85 79 0.20 16 PHYSICIAN'S<= OFFICE Occ Sensor 250 A/A1 99 79 0.20 16 B PHYSICIAN'S<= OFFICE B337 Occ Sensor 250 A/A1 92 79 0.20 16 REC/CP 30 BORK 300- Dimming - Manual F 641 114 0.10 11 REC/CP 30 ORK 300- Dimming - Manual F 641 76 0.10 8 PHYSICIAN'S OFFICE Occ Sensor - <= 250 0.20 16 A303 soft A/A1 83 79 U-NEIN-OFFIO-E A30Y Occ Sensgft- <= 250 A/A1 114 158 0.20 3.2 WAITING 322 Dimming - Manual F 9_91 76_ 0.10 8 WAITING 322 Dimming - Manual P/P1 991 76 0.10 8 WAITING 321,HALL 312 Dimming - Manual Z 9_91 270 0.1027 WAITING 321,HALL 312 Dimming - Manual P/P1 991 76 0.10 8 PHYSICIAN'S OFFICE _C318 __ Occ Sensor - <= 250 sgrt A/A1 80 79 0.20 16 PHYSICIC316 OFFICE Occ Sensor <= 250 A/A1 80 _ 79 0.20 16 TREADMILL D312 - -- Dimming - Manual F 218 114 0.10 11 OFFICE D304 Occ Sensor - <= 250 _s9n SS 185 42 0.20 _8 OFFICE D304 Dimming -Manual F 185 _ _ 114 0.10 11 WAITING D300 Dimming - Manual PP 322 105 0.10 10 ---- PHARMAIYOWAITING Dimming - Manual JJ 778 _ --- 180 -------- 0.10 18 PHARMA1 OYWAITING Dimming -Manual H 778 38 0.10 4 PHARMAIYOWAITING Dimming -Manual AA 778 304 0.10 30 1) From Equation 146-A 2) From Table 146-A PAGE TOTAL 434 BUILDING TOTAL _ Enter in LTG -2-C: Lighting Control Credit EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 107 of 146 INDOOR LIGHTING POWER ALLOWANCE LTG -S -C PROJECT NAME DATE Eisenhower Ambulatory Care Center i 10/17/2008 rA—LLOWED LIGHTING POWER (Choose OneMethod) COMPLETE BUILDING METHOD - CONDITIONED SPACES WATTS PER SF WATTS PER SF COMPLETE BLDG. AREA ALLOWED WATTS Electrical, Mechanical Room BUILDING CATEGORY (From Section 146 Table 146-13) 1,882 1,317 AREA CATEGORY METHOD - CONDITIONED SPACES WATTS PER SF AREA (SF) ALLOWED WATTS AREA CATEGORY (From Section 146 Table 146-C) Electrical, Mechanical Room 0.70 6,284 4,399 Lobby, Main Entry 1.50 7,043 10,565 Lounge, Recreation 1.10 1,108 1,218 Locker/Dressing Room 0.80 401 321 Waiting Area 1.10 10,706 11,777 Corridor/Restroom/Support 0.60 14,821 8,893 0 D Commercial, Industrial Stora e 0.60 806 484 Office 1.20 18,601 22,321 Medical and Clinical Care 1.20 19,928 23,913 Convention/Conference/Meeting 1.40 3,236 4,531 PAGE TOTAL 82,934 88,421 BUILDING TOTAL 83,806 89,457 AREA WATTS TAILORED METHOD - CONDITIONED SPACES TOTAL ALLOWED WATTS (From LTG -6-C or from computer run.) D UNCONDITIONED SPACES Complete Building and Area Catagory Methods Category (From Section 146 Table 146 -B&C) WATTS PER SF AREA (SF) ALLOWED WATTS Electrical, Mechanical Room 0.70 1,882 1,317 PAGE TOTAL BUILDING TOTAL 1 ,882 1=31 AREA WATTS TAILORED METHOD - UNCONDITIONED SPACES TOTAL UNCONDITIONED SPACES ALLOWED WATTS (From LTG -5-C and LTG -6-C) 0 D EnergyPro 4.4 by Energysoft User Number: 5678 Job Number: 07.0021 Page: 108 of 146 INDOOR LIGHTING POWER ALLOWANCE LTG-5-Cj PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 ALL WED LIGHTING POWER (Choose OneMethod) COMPLETE BUILDING METHOD - CONDITIONED SPACES WATTS PER SF COMPLETE BLDG. AREA ALLOWED WATTS BUILDING CATEGORY (From Section 146 Table 146-B) AREA CATEGORY METHOD - CONDITIONED SPACES AREA (SF) ALLOWED WATTS AREA CATEGORY (From Section 146 Table 146-C) WATTS PER SF Kitchen, Food Preparation 1.60 273 437 Exercise, Gymnasium 1.00 599 599 PAGE TOTAL 872 1 ,036 BUILDING TOTAL 83,806 89,457 AREA WATTS TAILORED METHOD - CONDITIONED SPACES TOTAL ALLOWED WATTS D (From LTG -6-C or from computer run.) UNCONDITIONED SPACES Complete Building and Area Catagory Methods Category (From Section 146 Table 146 -B&C) WATTS PER SF AREA (SF) ALLOWED WATTS PAGE TOTAL BUILDING TOTAL,317 D O AREA WATTS TAILORED METHOD - UNCONDITIONED SPACES TOTAL UNCONDITIONED SPACES ALLOWED WATTS (From LTG -5-C and LTG -6-C) BUJ EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:109 of 146 CERTIFICATE OF COMPLIANCE (Part 1 of 2) MECH-1-C PROJECT NAME DATE OF PLANSBUILDING DATE Eisenhower Ambulatory Care Center 8.22.07 10/17/2008 PROJECT ADDRESS BUILDING TYPE 'LX NONRESIDENTIAL ❑ HIGH RISE RESIDENTIAL ❑ HOTEL/MOTEL GUEST ROOM PHASE OF CONSTRUCTION O NEW CONSTRUCTION ❑ ADDITION ❑ ALTERATION ❑ UNCONDITIONED (File Affidavit) 45-280 Seeley Drive La Quinta COMPLIANCE Building Permit # PRINCIPAL DESIGNER - MECHANICAL TELEPHONE Parts 1 and 6 of the California Code of Regulations. This certificate applies only to building mechanical requirements. Edward P. Butera 714.751.3354 SIGNATU RE DOCUMENTATION AUTHOR TELEPHONE Checked by/Date JBA Consulting Engineers (714) 751-3354 Enforcement Agency GENERAL INFORMATION DATE OF PLANSBUILDING CONDITIONED FLOOR AREA CLIMATE ZONE 8.22.07 83,806sq.Ft. 15 BUILDING TYPE 'LX NONRESIDENTIAL ❑ HIGH RISE RESIDENTIAL ❑ HOTEL/MOTEL GUEST ROOM PHASE OF CONSTRUCTION O NEW CONSTRUCTION ❑ ADDITION ❑ ALTERATION ❑ UNCONDITIONED (File Affidavit) METHOD OF MECHANICAL ® PRESCRIPTIVE ❑ PERFORMANCE COMPLIANCE PROOF OF ENVELOPE COMPLIANCE ❑ PREVIOUS ENVELOPE PERMIT ❑ ENVELOPE COMPLIANCE ATTACHED STATEMENT OF COMPLIANCE This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations. This certificate applies only to building mechanical requirements. The documentation preparer hereby certifies that the documentation is acc ate and complete. DOCUMENTATION AUTHOR SIGNATU RE DATE Glynnis Cassan 10 -►?-2�8 The Principal Mechanical Designer hereby certifies that the proposed building sig presented in this set of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this permit application. The proposed building has been designed to meet the mechanical requirements contained in the applicable parts of Sections 100, 101, 102, 110 through115, 120 through 125, 142, 144, and 145. ❑ The plans & specifications meet the requirements of Part 1 (Sections 10-103a). ❑ The installation certificates meet the requirements of Part 1 (10-103a 3). ❑ The operation & maintenance information meets the requirements of Part 1 (10-103c). Please check one: (These sectionsof the Business and Professions Code are printed in full in the Nonresidential Manual.) ❑ I hereby affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code to sign this document as the person responsible for its preparation; and that I am licensed in the State of California as a civil engineer, or mechanical engineer or I am a licensed architect. ❑ I affirm that I am eligible under the exemption to Division 3 of the Business and Professions Code by Section 5537.2 or 6737.3 to sign this document as the person responsible for its preparation; and that I am a licensed contractor performing this work. D I affirm that I am eligible under the exemption to Division 3 of the Business and Professions Code to sign this document because it pertains to a structure or type of work described pursuant to Business and Professions Code sections 5537, 5538, and 6737.1. PRINCIPAL MECHANICAL DESIGNER - NAME SIGNATURE DATE LIC. # / b ` r` - 6S t1)9gz4 Edward P. Butera INSTRUCTIONS TO APPLICANT Cx! MECH-1-C: Certificate of Compliance. Part 1, 2, 3 of 3 are required on plans for all submittals. IX! MECH-2-C: Air/Water/Service/Water Pools Requirements. Part 1 of 3, 2 of 3, 3 of 3 are required for all submittals, but may be on plans. IN MECH-3-C: Mechanical Ventilation and Reheat is required for all submittals with mechanical ventilation, but may be on plans. A MECH-4-C: HVAC Misc. Prescriptive Requirements is required for all prescriptive submittals, but may be on plans. C I MECH-5-C: Mechanical Equipment Details are required for all performance submittals. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 110 of 146 CERTIFICATE OF COMPLIANCE (Part 2 of 2) MECH-1-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 Designer: This form is to be used by the designer and attached to the plans. Listed below are all the acceptance tests for mechanical systems. The designer is required to check the boxes by all acceptance tests that apply and list all equipment that requires an acceptance test. If all equipment of a certain type requires a test, list the equipment description and the number of systems to be tested in parentheses. The NJ number designates the Section in the Appendix of the Nonresidential ACM Manual that describes the test. Also indicate the person responsible for performing the tests (i.e. the installing contractor, design professional or an agent selected by the owner). Since this form will be part of the plans, completion of this section will allow the responsible party to budget for the scope of work appropriately. Building Departments: SYSTEM ACCEPTANCE. Before an occupancy permit is granted for a newly constructed building or space, or a new space -conditioning system serving a building or space is operated for normal use, all control devices serving the building or space shall be certified as meeting the Acceptance Requirements for Code Compliance. In addition a Certificate of Acceptance, MECH-1-A Form shall be submitted to the building department that certifies plans, specifications, installation rartifiratos anri nnoratinn anti mnintonnnro infnrmntinn moat tho roni dromontc of Rortinn 1 n-1 n4th1 nnri Titlo 9d Part R STATEMENT OF COMPLIANCE ❑ MECH-2-A: Ventilation System Acceptance Document -Variable Air Volume Systems Outdoor Air Acceptance -Constant Air Volume Systems Outdoor Air Acceptance Equipment requiring acceptance testing Test required on all New systems both New Construction and Retrofit. MECH-3-A: Packaged HVAC Systems Acceptance Document Equipment requiring acceptance testing Test required on all New systems both New Construction and Retrofit. ❑ MECH-4-A: Air -Side Economizer Acceptance Document Equipment requiring acceptance testing Test required on all New systems both New Construction and Retrofit. Units with economizers that are installed at the factory and certified with the commission do not require equipment testing but do require construction inspection. Cj MECH-5-A: Air Distribution Acceptance Document Equipment requiring acceptance testing This test required If the unit serves 5,000 ft2 of space or less and 25% or more of the ducts are in nonconditioned or semiconditioned space like an attic. New systems that meet the above requirements. Retrofit systems that meet the above requirements and either extend ducts, replace ducts or replace the packaged unit. ❑ MECH-6-A: Demand Control Ventilation Acceptance Document Equipment requiring acceptance testing All new DCV controls installed on new or existing packaged systems must be tested. ❑ MECH-7-A: Supply Fan Variable Flow Control Acceptance Document Equipment requiring acceptance testing All new VA fan volume controls installed on new or existing systems must be tested [1 MECH-8-A: -Hydronic System Control Acceptance Document -Variable Flow Controls Applies to chilled and hot water systems. -Automatic Isolation Controls Applies to new boilers and chillers and the primary pumps are connected to a common header. -Supply Water Temperature Reset Controls Applies to new constant flow chilled and hot water systems that have a design capacity greater than or equal to 500,000 Btu/hr. -Water-loop Heat Pump Controls Applies to all new waterloop heat pump systems where the combined loop pumps are greater than 5 hp. -Variable Frequency Controls Applies to all new distribution pumps on new variable flow chilled, hydronic heat pump or condenser water systems where the pumps motors are greater than 5 hp. _ Equipment requiring acceptance testing Page:111 of 146 EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 AIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM FEATURES ITEM OR SYSTEM TAG(S) Number of Systems T-24 MANDATORY MEASURES Section Heating Equipment Efficiency Cooling Equipment Efficiency Heat Pump Thermostat Furnace Controls Natural Ventilation Minimum Ventilation VAV Minimum Position Control Demand Control Ventilation Time Control Setback and Setup Control Outdoor Damper Control Isolation Zones Pipe Insulation Duct Insulation PRESCRIPTIVE MEASURES Calculated Heating Capacity x 1.43 2 Proposed Heating Capacity 2 Calculated Sensible Cooling Capacity x 1.212 Proposed Sensible Cooling Capacity 2 Fan Control DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset AIR SYSTEMS, Central or Single Zone DFC-1 DFC-2 DFC-3 1 1 1 1 Reference on Plans or Specification 1 112(a) n/a n/a n/a 1120 12.5 SEER / 10.9 EER 12.5 SEER / 10.9 EER 12.5 SEER / 10.9 EER 112(b) n/a n/a n/a 112(c), 115(a) n/a n/a n/a 121(b) Yes Yes Yes 121(b) 20 cfm 20 cfm 20 cfm 121 cam No No No 121(c) No No No 121(c) 122 a Programmable Switch Programmable Switch Programmable Switch 122(e) Heating & Cooling Required Heating & Cooling Required Heating & Cooling Required 122(f) Auto Auto Auto 122(g) n/a n/a n/a 123 124 R-8.0 R-8.0 R-8.0 144 (a & b 3,661 btuh 1,371 btuh 2,016 btuh 144 a& b _ 0 btuh 0 btuh 0 btuh 144 (a & b) 1,699 btuh 1,752 btuh 2,630 btuh 14"a & b 15,076 btuh 15,075 btuh 15,164 btuh 144 c, Constant Volume Constant Volume Constant Volume 144 (c) 144 (c) Yes Yes Yes 144 d No No No 144 -(PL- No Economizer No Economizer No Economizer 1440 Constant Temp Constant Temp Constant Temp_ 144 (f) Constant Temp Constant Temp Constant Temp 144 (k) _ No No _ No Duct Sealing for Prescriptive Compliance 1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/W in the column. 2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1. 3: Enter Yes if System is: Constant Volume, Single Zone; Serves < 5,000 sqft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance, see PERF -1 for performance method duct sealing requirements. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 112 of 146 AIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-C PROJECT NAME DATE Eisenhower Ambulatory are Center 10/17/2008 SYSTEM FEATURES ITEM OR SYSTEM TAG(S) Number of Systems T-24 MANDATORY MEASURES Section Heating Equipment Efficiency Cooling Equipment Efficiency Heat Pump Thermostat Furnace Controls Natural Ventilation Minimum Ventilation VAV Minimum Position Control Demand Control Ventilation Time Control Setback and Setup Control Outdoor Damper Control Isolation Zones Pipe Insulation Duct Insulation PRESCRIPTIVE MEASURES Calculated Heating Capacity x 1.43 2 Proposed Heating Capacity 2 Calculated Sensible Cooling Capacity x 1.212 Proposed Sensible Cooling Capacity 2 Fan Control DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset Duct Sealing for Prescriptive Compliance 1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1. AIR SYSTEMS, Central or Single Zone FC -1 FC -2 FC -3 1 1 1 Reference on Plans or Specification t 112(a) n/a n/a n/a 112(aa) n/a n/a n/a 112(b) n/a n/a n/a 112(c), 115(a) n/a n/a n/a 121(b) No No Yes 121(b) 11 cfm 18 cfm 39 cfm 121 c No No No 121(c) No No Yes 121 c , 1�ej No Economizer No Economizer Programmable Switch 122(e) Heating & Cooling Required Heating & Cooling Required Heating & Cooling Required 122 Constant Temp Constant Temp Constant Temp 122(g) n/a n/a n/a 123 YES YES YES 124 R-8.0 R-8.0 R-8.0 144 a & n/a n/a n/a 144 a & b 0 btuh 0 btuh 22,600 btuh 144 Sa & b n/a n/a n/a 144 (a & 13,800 btuh 44,300 btuh 15,100 btuh 144 (c Constant Volume Constant Volume Constant Volume 144 (c) 144jc) No No _N_ o 144�d) _- No No No 144 a No Economizer No Economizer No Economizer 144 (f) Constant Temp Constant Temp_ Constant Temp 144 (f) Constant Temp Constant Temp Constant Temp 144 (k) No No No 3: Enter Yes if System is: Constant Volume, Single Zone; Serves < 5,000 sqft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance, see PERF -1 for performance method duct sealing requirements. pro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 113 of 146 JAIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-CI PROJECT NAME Eisenhower Ambulator DATE Care Center 10_/17_/2.008 SYSTEM FEATURES ITEM OR SYSTEM TAG(S) Number of Systems T-24 MANDATORY MEASURES Section Heating Equipment Efficiency Cooling Equipment Efficiency Heat Pump Thermostat Furnace Controls Natural Ventilation Minimum Ventilation VAV Minimum Position Control Demand Control Ventilation Time Control Setback and Setup Control Outdoor Damper Control Isolation Zones Pipe Insulation Duct Insulation PRESCRIPTIVE MEASURES Calculated Heating Capacity x 1.43 2 Proposed Heating Capacity 2 Calculated Sensible Cooling Capacity x 1.212 Proposed Sensible Cooling Capacity 2 Fan Control DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset Duct Sealing for Prescriptive Compliance AIR SYSTEMS, Central or Single Zone FC -4 FC -5 FC -5A 1 1 1 Reference on Plans or Specification t 112(a) n/a n/a n/a 112(a) n/a n/a n/a 112(b) n/a n/a n/a 112(c), 115(a) n/a n/a n/a 121(b) No No No 121(b) 170 cfm 50 cfm 255 cfm 121 c No No No 121(c) No No No 121(c), 122(e) No Economizer No Economizer No Economizer 122(e) Heating & Cooling Required Heating & Cooling Required Heating & Cooling Required 122 Constant Temp Constant Temp Constant Temp 122(g) n/a n/a n/a 123 YES YES YES 124 R-8.0 R-8.0 R 144 (a & b) n/a n/a n/a 144 a & b 0 btuh 0 btuh 27,500 btuh 144 (ate n/a n/a n/a 1440 & b) 57,100 btuh 13,800 btuh 21,800 btuh 144A Constant Volume Constant Volume Constant Volume 144 (c) 144 (c)___ No No No 144 d No No No 144 (e) No Economizer No Economizer No Economizer 144 (D Constant Temp Constant Temp Constant Temp 144 (f) Constant Temp Constant Temp Constant Temp 144 (k) No No No 1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1. 3: Enter Yes if System is: Constant Volume, Single Zone; Serves < 5,000 sqft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance, see PERF -1 for performance method duct sealing requirements. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Pa! iClSMET1 AIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-C PROJECT NAME DATE Eisenhower Ambulatory_ Care Center 10/17/2008 , SYSTEM FEATURES ITEM OR SYSTEM TAG(S) Number of Systems T-24 MANDATORY MEASURES Section Heating Equipment Efficiency Cooling Equipment Efficiency Heat Pump Thermostat Furnace Controls Natural Ventilation Minimum Ventilation VAV Minimum Position Control Demand Control Ventilation Time Control Setback and Setup Control Outdoor Damper Control Isolation Zones Pipe Insulation Duct Insulation PRESCRIPTIVE MEASURES Calculated Heating Capacity x 1.43 2 Proposed Heating Capacity 2 Calculated Sensible Cooling Capacity x 1.212 Proposed Sensible Cooling Capacity 2 Fan Control DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset Duct Sealing for Prescriptive Compliance 1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1. AIR SYSTEMS, Central or Single Zone FC -6 FC -7 FC 7A 1 1 1 Reference on Plans or Specification 1 112(a) n/a n/a n/a 112(a) n/a n/a n/a 112(b) n/a n/a n/a 112(c), 115(a) n/a n/a n/a 121(b) No No No 121(b) 17 cfm 16 cfm 177 cfm 121 c No No No 121(c) Yes Yes No 121(c), 122(e) Programmable Switch Programmable Switch No Economizer 122(e) Heating & Cooling Required Heating & Cooling Required Heating & Cooling Required 122 Auto Auto Constant Temp 122(g) n/a n/a n/a 123 YES YES YES 124 R-8.0 R-8.0 R-8.0 144__(a &_P) n/a n/a n/a 144 a & b 0 btuh 0 btuh 27,400 btuh 144 a & b n/a n/a n/a 144 a & b 13,800 btuh 18,200 btuh 21,800 btuh 144 c Constant Volume Constant Volume Constant Volume 144 (c) No 144 No No No 144 Ce No Economizer No Economizer No Economizer 144 Constant Temp Constant Temp Constant Temp 144 (f) Constant Temp Constant Temp Constant Temp 144 (k)— --- No — -- — ----No _ N 3: Enter Yes if System is: Constant Volume, Single Zone; Serves < 5,000 sqft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance, see PERF -1 for performance method duct sealing requirements. 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 115 of 146 AIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-C PROJECT NAME DATE Eisenhower Ambulatory_ Care Center 10/17/2008 SYSTEM FEATURES ITEM OR SYSTEM TAG(S) Number of Systems T-24 MANDATORY MEASURES Section Heating Equipment Efficiency Cooling Equipment Efficiency Heat Pump Thermostat Furnace Controls Natural Ventilation Minimum Ventilation VAV Minimum Position Control Demand Control Ventilation Time Control Setback and Setup Control Outdoor Damper Control Isolation Zones Pipe Insulation Duct Insulation PRESCRIPTIVE MEASURES Calculated Heating Capacity x 1.43 2 Proposed Heating Capacity 2 Calculated Sensible Cooling Capacity x 1.212 Proposed Sensible Cooling Capacity 2 Fan Control DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset Duct Sealing for Prescriptive Compliance 1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1. AIR SYSTEMS, Central or Single Zone FC -8 FC -9 FC -10 1 1 1 t 1 Reference on Plans or Specification 1 112(a) n/a n/a n/a 112(a) n/a n/a n/a 112(b) n/a n/a n/a 112(c), 115(a) n/a n/a n/a 121(b) No No No 121(b) 14 cfm 127 cfm 28 cfm 121 c No No No 121(c) Yes No No 121(c), 122(e) Programmable Switch No Economizer No Economizer 122(e) Heating & Cooling Required Heating & Cooling Required Heating & Cooling Required 122 Auto Constant Temp Constant Temp 122(g) n/a n/a n/a 123 YES YES YES 124 1 R-8.0 R-8.0 144 a & b n/a n/a n/a 144 a& b 0 btuh 0 btuh 0 btuh 144 (a & b) n/a n/a n/a 144Aa & b� 13,800 btuh 18,000 btuh btuh 144 c Constant Volume Constant Volume _24,017 Constant Volume 144 (c) -144-(c) No No No 144(d) No _ No No 144 e No Economizer No Economizer No Economizer 144 M Constant Temp_ _ Constant Temp Constant Tem -p_ 144 (f) Constant Temp Constant Temp Constant Temp 144 (k) No No No 3: Enter Yes if System is: Constant Volume, Single Zone; Serves < 5,000 sqft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance see PERF -1 for performance method duct sealing requirements. 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 116 of 146 IR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-C 777-PAmbulatorysenhower DATE Care Center — 10/17/2008 SYSTEM FEATURES ----- ITEM OR SYSTEM TAG(S) Number of Systems T-24 MANDATORY MEASURES Section Heating Equipment Efficiency Cooling Equipment Efficiency Heat Pump Thermostat Furnace Controls Natural Ventilation Minimum Ventilation VAV Minimum Position Control Demand Control Ventilation Time Control Setback and Setup Control Outdoor Damper Control Isolation Zones Pipe Insulation Duct Insulation PRESCRIPTIVE MEASURES Calculated Heating Capacity x 1.43 2 Proposed Heating Capacity 2 Calculated Sensible Cooling Capacity x 1.212 Proposed Sensible Cooling Capacity 2 Fan Control DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset Duct Sealing for Prescriptive Compliance 1: For each central and sin le AIR SYSTEMS, Central or Single Zone AH -1 AH -2 AH -3 1 1 1 Reference on Plans or Specification 1 a & b n/a n/a n/a a & b P144 n/a n/a n/a a & b) n/a n/a n/a a & b) n/a r(c)No n/a n/a 144 c 144 (c) Yes Yes Yes 1144K- 90 cfm 1742 cfm 2142 cfm 144 dam_ No No Yes 144 e) — 144A_ No No Yes 121(c),122_(e) Programmable Switch Pro rammable Switch Pro rammable Switch 122(e) Heating & Cooling Required Heating & Cooling Required Heating & Cooling Required 122(D.Auto Auto Auto 122(g) n/a n/a n/a 123 YES YES YES 124 R-8.0 R-8.0 R-8.0 a & b n/a n/a n/a a & b P144 487,000 btuh 395,300 btuh 261,100 btuh a & b) n/a n/a n/a a & b) _ 399,500 btuh 385,300 btuh 224,800 btu 144 c 144 (c) Variable Speed SEE PLAN Variable Speed SEE PLAN Variable Speed SEE PLAN 1144K- Yes Yes Yes 144 dam_ No No Yes -- 144 e) — 144A_ __— No Economizer Constant Tem No Economizer Constant Temp Diff_. Te_m_p (Integrated Coldest Zone 144 (f) — — —Constant Temp Constant Temp Warmest Zone 144 (k) NoNo — -- -- No g zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1. 3: Enter Yes if System is: Constant Volume, Single Zone; Serves < 5,000 sgft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance, see PERF -1 for performance method duct sealing requirements. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 _ aae'117 of 1da AIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM FEATURES ITEM OR SYSTEM TAG(S) Number of Systems T-24 MANDATORY MEASURES Section Heating Equipment Efficiency Cooling Equipment Efficiency Heat Pump Thermostat Furnace Controls Natural Ventilation Minimum Ventilation VAV Minimum Position Control Demand Control Ventilation Time Control Setback and Setup Control Outdoor Damper Control Isolation Zones Pipe Insulation Duct Insulation PRESCRIPTIVE MEASURES Calculated Heating Capacity x 1.43 2 Proposed Heating Capacity 2 Calculated Sensible Cooling Capacity x 1.212 Proposed Sensible Cooling Capacity 2 Fan Control DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset Duct Sealing for Prescriptive Compliance 1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1. AIR SYSTEMS, Central or Single Zone AH -4 AH -5 AH -6 1 1 1 Reference on Plans or Specification 1 112(a) n/a n/a n/a 112(a) n/a n/a n/a 112(b) n/a n/a n/a 112(c), 115(a) n/a n/a n/a 121(b) Yes Yes Yes 121(b) 2464 cfm 3282 cfm 490 cfm 121 c No Yes Yes 121(c) Yes Yes No 121(c),122 e Programmable Switch Programmable Switch Programmable Switch 122(e) Heating & Cooling Required Heating & Cooling Required Heating & Cooling Required 122(D'Auto Warmest Zone Auto Auto 122(g) n/a n/a n/a 123 YES YES 124 R-8.0 R-8.0 R-8.0 144 (a & b)_ n/a n/a n/a 144a & b _ 370,900 btuh 534,500 btuh 79,000 btuh 144 (a & b) n/a n/a n/a 144 a & b)_ 310,900 btuh 451,800 btuh 114,000 btuh_ 144 c Variable Speed Variable Speed Variable Speed 144 (c) SEE PLAN SEE PLAN 144Ac) Yes Yes Yes 144 d No Yes Yes 144je) No Economizer No Economizer No Economizer Coldest Zone Coldest Zone Coldest Zone 144 (f) Warmest Zone Warmest Zone Warmest Zone 144 (k) No No No 3: Enter Yes if System is: Constant Volume, Single Zone; Serves < 5,000 sgft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance, see PERF -1 for performance method duct sealing requirements. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 118 of 146 WATER SIDE SYSTEM REQUIREMENTS Part 2 of 2 MECH-2-C PROJECT NAME Eisenhower Ambulatory Care Center DATE 10/17/2008 SYSTEM FEATURES 2 WATER SIDE SYSTEMS: Chillers, Towers, Boilers, Hydronic Loops ITEM OR SYSTEM TAG(S) CH -1 CH -2 CT -1 & CT -2 Number of Systems 1 1 2 T-24 MANDATORY MEASURES Section Reference on Plans or Specification' Equipment Efficiency 112(a) 0.529 kW/ton 0.529 kW/ton 10 F App Pipe Insulation 123 iping CHW Piping n/a PRESCRIPTIVE MEASURES Calculated Capacity 144 (a& b) 272 tons 272 tons 640 tons Proposed Capacity 144 (a & b) 320 tons 320 tons n/a Tower Fan Controls 144 h n/a n/a Variable -Speed -Fan Tower Flow Controls 144 h n/a n/a Wetbulb-Reset Variable Flow System Design 144 Q) Required Required n/a Chiller and Boiler Isolation 144 @ Re uired Required n/a CHW and HHW Reset Controls 144 Q) Required Required n/a WLHP Isolation Valves 144 n/a n/a Required VSD on CHW, CW & WLHP Pumps > 5 144 Required Required Required HP DP Sensor Location 144 0) 1: For each chiller, cooling tower, boiler, and hydronic loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/K in the column. 2: Water side systems include wet side system using other liquids such as glycol or brine. Service Hot Water, Pool Heating ITEM OR SYSTEM TAG(S) DHW Heater Number of Systems 2 MANDATORY MEASURES Reference on Plans or Specification' Water Heater Certification 113 (a) WH -1 & WH -2 Water Heater Efficiency 113 (b) 84% Service Water Heating Installation 113 (c) Pool and Spa Efficiency and Control 114 (a) n/a Pool and Spa Installation 114 (b) n/a Pool Heater - No Pilot Light 115 (c) n/a Spa Heater - No Pilot Light 115 (d) n/a 1: For each water heater, pool heat and domestic water loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/K ins the column. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:119 of 146 WATER SIDE SYSTEM REQUIREMENTS Part 2 of 2 MECH-2-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM FEATURES ITEM OR SYSTEM TAG(S) Number of Systems MANDATORY MEASURES Equipment Efficiency Pipe Insulation PRESCRIPTIVE MEASURES Calculated Capacity Proposed Capacity Tower Fan Controls Tower Flow Controls Variable Flow System Design Chiller and Boiler Isolation CHW and HHW Reset Controls WLHP Isolation Valves VSD on CHW, CW & WLHP Pumps > 5 HP DP Sensor Location 1: For each chiller, cooling tower, boiler, and hydronic loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Water side systems include wet side system using other liquids such as glycol or brine. Service Hot Water, Pool Heating ITEM OR SYSTEM TAG(S) Number of Systems MANDATORY MEASURES Reference on Plans or Specification' Water Heater Certification 2 WATER SIDE SYSTEMS: Chillers, Towers, Boilers, Hydronic Loops Water Heater Efficiency B-1 & B-2 Service Water Heating Installation 2 T-24 114 (a) Section Reference on Plans or Specification 112(a) 87% 123 HW Pi in 144 (a & b) 1,341,619 btuh 144 (a & b) 2,610,000 btuh 144 h Required 144 h n/a 144 0) 144 Required 144 Q) Required 144 ' n/a 144 n/a 144 n/a 1: For each chiller, cooling tower, boiler, and hydronic loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Water side systems include wet side system using other liquids such as glycol or brine. Service Hot Water, Pool Heating ITEM OR SYSTEM TAG(S) Number of Systems MANDATORY MEASURES Reference on Plans or Specification' Water Heater Certification 113 (a) Water Heater Efficiency 113 (b) Service Water Heating Installation 113 (c) Pool and Spa Efficiency and Control 114 (a) Pool and Spa Installation 114 (b) Pool Heater - No Pilot Light 115 (c) Spa Heater - No Pilot Light 115 (d) 1: For each water heater, pool heat and domestic water loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" ins the column. L EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page:120 of 146 MECHANICAL VENTILATION MECH-3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 PRESCRIPTIVE REHEAT LIMITATION (Section 144(d)) MECHANICAL VENTILATION Section 121(b)2) AREA BASIS OCCUPANCY BASIS V_AV MINIMUM A B C D E F G H I J K L M N ZONE/SYSTEM n O yDa �1 N L v 0 0 a c W.00 rD ID -n' E °o .. _ W ,�3 X D o m -A 2 �c �3 O O• ID •� o 9 man N fD 3 M p3'v3m X0 X C7 �-n -n 3 ,. �,A O X O L1 M L - D �p n�cDln 'Il .. N D 7 o� �' ° TI y 3� v a_ T. K 3 n �1W 3X W a? c� c3 O X n H -Oi� T? 3 yv :a 'a 0 3 » • D z CD z D I.T. ROOM 13 0.15 20 20 20 DFC-1 Total 20 20 I.T. ROOM 13E 0.15 20 20 20 DFC-2 Total 20 20 I.T. ROOM 13C 0.151 20 20 20 DFC-3 Total 20 20 ELEC. ROOM 7E 0.15 11 11 11 FC -1 Total 11 11 ELEV. EQUIP. 11 0.15 18 18 18 FC -2 Total 18 18 VESTIBULE 262 0.15 39 39 39 FC -3 Total 39 39 MECHANICAL ROOM 1,131 0.15 170 170 170 FC -4 Total 170 170 ELEC. ROOM 332 0.15 50 50 50 FC -5 Total 50 50 BLDG. SERVICES 1,703 0.15 255 255 255 FC -5A Total 255 255 ELEC. ROOM 112 0.15 17 17 17 FC -6 Total 17 17 ELEV. EQUIP. 10 0.15 16 16 16 FC -7 Total 16 16 BLDG. SERVICES 1,17E--0.15 177 177 177 FC -7A Total 177 177 ELEC. ROOM 9 0.15 14 14 14 C Minimum ventilation rate per Section 121, Table 121-A E Based on fixed seat or the greater of the expected number of occupants and 50% of the CBC occupant load for egress purposes for spaces. without fixed seating.— H Required Ventilation Air (REO'D V.A.) is the larger of the ventilation rates calculated on and AREA or OCCUPANCY BASIS (column D or G). Must be greater than or equal to H, or use Transfer Air (column N) to make up the difference. J Design fan supply cfm (Fan CFM) x 30%; or K Condition area (ft. sq.) x 04 cfm/ft. sq.; or ------------------ L Maximum of Columns H, J, K, or 300 cfm _ M This must be less than or equal to Column L and greater that or equal to the sum of Columns H + N. N Transfer air must be provided where the Required Ventilation Air (column 1) is greater than the Design Minimum Air (column M). Where required, transfer air must be greater than or equal to the difference between the Required Ventilation Air (column 1) and the Design Minimum Air (column M), column H - M. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 121 of 146 MECHANICAL VENTILATION MECH-3-CI r77 NAME DATE Eisenhower Ambulatny Care Center 10/17/2008 PRESCRIPTIVE REHEAT LIMITATION (Section 144(d)) MECHANICAL VENTILATION Section 121 b 2 AREA BASIS OCCUPANCY BASIS VAV MINIMUM A B C D E F G H I J K L M N ZONE/SYSTEM yDa _ Ty„ 3 u, mMCi17 tp -n~3 0 .' �D3 t7M_n °1 C3 SA �' o M'0 O �� Q m0� �C'�n `3 OSA O �O " y n(� �IwN iC n' N\ n0� �iN 3C0 �a L^. H x a O a' •� c c G7 K ONO n=— T - o O3 '+' ti. D D FC -8 Total 14 14 BLDG. SERVICES 84 0.15 127 127 127 FC -9 Total 127 127 IST FLR. MRI EQT. 18C 0.15 28 28 28 FC -10 Total 28 28 1ST FLR. LOUNGE 532 0.50 266 266 266 1ST FLR. DRESSING 13E 0.15 20 20 20 1ST FLR. WAITING 2,938 0.15 441 441 441 1ST FLR. LOBBY 4,50 0.15 675 675 675 1ST FLR. COOR/RR 4,324 0.15 649 649 649 1ST FLR. STORAGE 527 0.15 79 79 79 1ST FLR. OFFICES 1,042 0.15 156 156 156 1ST FLR. MED. AREA 4,69 0.15 704 704 704 AH -1 Total 2,990 2,990 IST FLR. DRESSING 146 0.15 22 22 22 IST FLR. LOUNGE 154 0.50 77 77 77 1ST FLR. OFFICES 85C 0.15 127 127 127 1ST FLR. COOR/RR 3,465 0.15 520 520 520 1ST FLR. STORAGE 28C 0.15 42 42 42 1ST FLR. WAITING 1,746 0.15 262 262 262 1ST FLR. MED. AREA 4,61 0.15 692 692 692 AH -2 Total 1,742 1,742 2ND FL. CONFRENCE 2,75 0.50 1,379 1,379 1,379 2ND FL. KITCHEN 27 0.15 41 41 41 ND FL. EX. DEMO 330 0.15 49 49 49 C Minimum ventilation rateper Section 121, Table 121-A E Based on fixed seat or the greater of the expected number of occupants and 50% of the CBC occupant load for egress purposes for spaces without fixed seating._____ H Required Ventilation Air (REQ'D V.A.) is the larger of the ventilation rates calculated on and AREA or OCCUPANCY BASIS (column D or G). I Must be greater than or equal to H, or use Transfer Air (column N) to make up the difference. J Design fan supply cfm (Fan CFM) x 30%; or K Condition areaft. s - - -----------------�-__ _ __________ ( q.) x 04 cfm/ft. sq.: or -- -.. _. ---- — ----------- ------ L Maximum of Columns H, J, K, or 300 cfm M This must be less than or equal to Column Land greater that or equal to the sum of Columns H + N. N Transfer air must be provided where the Required Ventilation Air (column 1) is greater than the Design Minimum Air (column M). Where required, transfer air must be greater than or equal to the difference between the Required Ventilation Air (column 1) and the Design Minimum Air (column M), column H - M. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 122 of 146 MECHANICAL VENTILATION MECH-3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 PRESCRIPTIVE REHEAT LIMITATION (Section 144(d)) MECHANICAL VENTILATION Section 121 M2) A AREA B BASIS C D OCCUPANCY E BASIS F G H I VAV MINIMUM J K L M N ZONE/SYSTEM 0 D a a iv a n 0~� o o _ W'� Cr 5 n A -n m Z m 3 '6 � m o 0 m a f� O� ?r. ' m c 3 -n C T M _ � d A O �� G1 < D n= 0 3 M f0 '� n' o, n fD ° C O y E 0 3 � O P. c o C N C O__ -n y � 3 �' D iD D 2ND FL. HALL/SUPP. 50 0.15 76 76 76 2ND FL. OFFICE 242 0.15 36 36 36 2ND FL. WAITING 51S 0.15 78 78 78 ND FLR. COOR. 1,08 0.15 162 162 162 432 432 ND FLR. RESTROOM 31E 0.15 47 47 47 127 300 ND FLR. LOBBY 274 274 274 730 729 AH -3 Total 2,142 2,142 ND FL. OFFICE 141 141 141 ND FL. DRESSING J730. 18 18 18 ND FL. HALL/SUPP. 110 110 110 2ND FL. WAITING 43q 0.15 66 66 66 2ND FL. MED. AREA 406 0.15 61 61 61 2ND FLR. TEN. SPC. 13,787 0.15 2,068 2,068 2,068 AH -4 Total 2,464 2,464 AV 340 197 0.15 30 2.0 15.0 30 30 30 75 79 300 75 AV 339 1,32 0.15 199 13.2 15.0 199 199 199 360 530 529 360 AV 338 47 0.50 240 32.1 7.5 240 240 240 486 192 485 486 AV 337 262 0.15 39 2.6 15.0 39 39 39 276 105 300 276 AV 336 764 0.15 115 7.6 15.0 115 115 115 159 306 305 159 AV 335 289 0.50 144 19.4 7.5 144 144 144 414 116 413 414 AV 334 1,154 0.15 173 11.5 15.0 173 173 173 315 462 461 315 AV 333 138 0.15 21 1.4 15.0 21 2121.162 55 300 162 AV 332 404 0.15 61 4.0 15.0 61 61 61 234 162 300 234 AV 331 184 0.15 28 1.8 15.0 28 28 28 90 74 300 90 AV 330 719E 0.15 108 7.2 15.0 108 108 108 165 288 165 C _ _300 Minimum ventilation rate per Section 121 Table 121-A E Based on fixed seat or, the greater of the expected number of occupants and 50% of the CBC occupant load for egress purposes for spaces without fixed seating_ H Required Ventilation Air (REQ'D V.A.) is the larger of the ventilation rates calculated on and AREA or OCCUPANCY BASIS (column D or G). I Must be greater than or equal to H, or use Transfer A_ it (column N) to make. up the difference J Design fan supply cfm (Fan CFM) x 30%; or K Condition area (ft. sq.) x 04 cfm/ft. sq.; or ---------- --- L Maximum of Columns H, J, K, or 300 cfm M This must be less than or equal to Column L and greater that or equal to the sum of Columns H + N. N Transfer air must be provided where the Required Ventilation Air (column I) is greater than the Design Minimum Air (column M). Where required, transfer air must be greater than or equal to the difference between the Required Ventilation Air (column 1) and the Design Minimum Air (column M), column H - M. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 123 of 146 MECHANICAL VENTILATION MECH-3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 PRESCRIPTIVE REHEAT LIMITATION (Section 144(d)) MECHANICAL VENTILATION Section 121(b)2) AREA BASIS OCCUPANCY BASIS VAV MINIMUM A B C D E F G H I J K L M N ZONE/SYSTEM 0 D3 T N a' '_' O .0 d. n N W -n T °o W'a- X D n N -n z O r o n N W T 3 Cr m03 X COY O -nl, Ti _ � GAO O X O - D Cpm too 't1 r3+ N �`� D o oc c)ID T UJ �• �'a A a y. o 3W N X '- ,'gyp ec wed p O X n y O -n r -" 3c_ � P.� •p =• -OS » • a N D AV 329 571 0.15 86 5.7 15.0 86 86 86 1351 229 300 135 AV 328 32 0.15 48 3.2 15.0 48 48 48 219 129 300 219 AV 327 57 0.15 86 5.7 15.0 86 86 86 135 229 300 135 AV 326 573 0.15 86 5.7 15.0 86 86 86 135 229 3001 135 AV 325 506 0.15 76 5.1 15.0 76 76 76 296 202 300 296 AV 324 214 0.15 32 2.1 15.0 32 32 32 63 86 300 63 AV 323 36 0.15 54 3.6 15.0 54 54 54 82 144 300 82 AV 322 28 0.15 43 2.9 15.0 43 43 43 68 1161 300 68 AV 321 192 0.15 29 1.9 15.0 29 29 29 144 77 300 144 AV 320 64 0.15 96 6.4 15.0 96 96 96 144 256 300 144 AV 319 64 0.15 96 6.4 15.0 96 96 96 129 256 300 129 AV 318 352 0.15 53 3.5 15.0 53 53 53 198 141 300 198 AV 317 29E 0.15 44 3.0 15.0 44 44 44 219 118 300 219 AV 316 452 0.15 68 4.5 15.0 68 68 68 153 181 300 153 AV 315 99 0.15 149 9.9 15.0 149 149 149 231 3961 396 231 AV 314 99 0.15149 9.9 15.0 149 149 149 231 396 396 231 AV 313 416 0.15 62 4.2 15.0 62 62 62 153 166 300 153 AV 312 316 0.15 47 3.2 15.0 47 47 47 240 126 300 240 AV 311 45E 0.15 68 4.6 15.0 68 68 68 216 1821 300 216 AV 310 40 0.15 61 4.1 15.0 61 61 61 298 163 300.298 AV 309 27q 0.15 40 5.4 7.5 40 40 40 268 108 300 268 AV 308 396 0.15 59 4.0 15.0 59 59 59 240 158 300 240 AV 307 76E 0.15 115 7.7 15.0115 115 115 177 307 307 177 AV 306 799 0.15 120 8.0 15.0 120 120 120 140 320 319 140 AV 305 62 0.15 94 6.3 15.0 94 94 94 206 25 3001____206 C Minimum ventilation rate per Section 121, Table 121_A_ E Based on fixed seat or the greater of the. expected, number of occupants and 50% .50 of the CBC occupant load for egress purposes for spaces without fixed seating_ H Required Ventilation Air (REQ'D V.A.) is the larger of the ventilation rates calculated on and AREA or OCCUPANCY BASIS (column D or G). th I Must be greater an or equal to H or use Transfer Air (column N) to make up the difference. J Design fan supply cfm (Fan CFM) x 300/6', or K Condition area (ft. sq.) x 04 cfm/ft. sq.; or L Maximum of Columns H, J, K, or 300 cfm M This must be less than or equal to Column Land greater that or equal to the sum of Columns H + N. N Transfer air must be provided where the Required Ventilation Air (column 1) is greater than the Design Minimum Air (column M). Where required, transfer air must be greater than or equal to the difference between the Required Ventilation Air (column 1) and the Design Minimum Air (column M), column H - M. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 124 of 146 MECHANICAL VENTILATION MECH-3-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 TLIMITATION PRESCRIPTIVE REHEAT (Section 144(d)) MECHANICAL VENTILATION Section 121(b)2) AREA BASIS OCCUPANCY BASIS VAV MINIMUM A B C D E F I G H I J K L I M N ZONE/SYSTEM yDa �(D 3 in W 0 �mT �'� oo Wan x Dn �NT � m3 o r <D� o maw wm� 3'� CrNo fii x� �'O0 � 9' CdA ox G t70,G D n=� Tr.� CD3 n"'p stn fav 1° 3 �W w A 7,pCID w�3 o=x in _ MT a 3 - . r'n D AV 304 332 0.15 50 3.3 15.0 50 50 50 114 133 3001 114 AV 303 503 0.15 75 5.0 15.0 75 75 75 330 20 329 330 AV 302 278 0.15 42 2.8 15.0 42 42 42 159 11 300 159 AV 301 32 0.15 48 3.2 15.0 48 48 48 267 129 300 267 3RD FLR. RR/JAN. 317 0.15 48 48 48 127 300 AH -5 Total 3,282 3,282 AV 101 13 0.50 67 8.9 7.5 67 67 67 130 53 300 130 AV 102 502 0.15 75 5.0 15.0 75 75 75 162 20 300 162 AV 106 27 0.15 40 2.7 15.0 40 40 40 102 108 300 102 AV 105 57E 0.15 86 5.8 15.0 86 86 86 174 2301 300 174 AV 108 34 0.15 51 3.4 15.0 51 51 51 135 136 300 135 AV 103 242 0.15 36 2.4 15.0 36 36 36 165 97 300 165 AV 104 76 0.15 11 0.8 15.0 11 11 11 69 30 300 69 AV 107 778 0.15 117 7.8 15.0 117 117 117 270 311 311 270 1ST FLR. RESTROOM 42 0.15 6 6 6 AH -6 Total 490 490 C Minimum ventilation rate per Section 121, Table 121-A E Based on fixed seat or the greater of the expected number of occupants and_50 / of the CBC occupant load for egress purposes for spaces without fixed seating___ - H Required Ventilation Air (REQ'D V.A.) is the larger of the ventilation rales calculated on and AREA or OCCUPANCY BASIS (column D or G). I Must be greater than orequal to H, or use Transfer Air column N) to make up the difference J Design fan supply cfm (Fan CFM) x 30%; or K Condition areaft, s ( q.) x 04 cfm/ff. sq.; or L Maximum of Columns H, J, K, or 300 cfm M This must be less than or equal to Column L and greater that or equal to the sum of Columns H + N. N Transfer air must be provided where the Required Ventilation Air (column 1) is greater than the Design Minimum Air (column M). Where required, transfer air must be greater than or equal to the difference between the Required Ventilation Air (column 1) and the Design Minimum Air (column M), column H - M. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 125 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-CI PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME DFC-1 FLOOR AREA 131 FAN POWER CONSUMPTION A FAN DESCRIPTION Supply Fan B C I D E F DESIGN BRAKE HP EFFICIENCY A) If filter pressure drop is greater than 1 inch W.C. enter NUMBER OF FANS PEAK WATTS B x E x 746 / (C X D) MOTOR DRIVE 0.250 64.0% 97.0% 1.0 300 5) SPf 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.376 _ 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 300 2) SUPPLY DESIGN AIRFLOW (CFM) 800 A) If filter pressure drop is greater than 1 inch W.C. enter 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 filter pressure drop. SPa on line 4 and Total Fan pressure SPf on Line 5. B) Calculate Fan Adjustment and enter on Line 6. 4 SPa 5) SPf 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.376 _ 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(i) apply. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number 07.0021 Page 126 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-C PROJECT NAME -ATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME D FC -2 FLOOR AREA 136 FAN POWER CONSUMPTION A B C D E F DESIGN EFFICIENCY NUMBER PEAK WATTS FAN DESCRIPTION BRAKE HPMOTOR DRIVE OF FANS B x E x 746 / (C X D) Supply Fan 0.250 64.0% 97.0% 1.0 300 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A A) If filter pressure drop is greater than 1 inch W.C. enter filter pressure drop. SPa on line 4 and Total Fan pressure 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 300 2) SUPPLY DESIGN AIRFLOW (CFM) 800 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 144 (h) SPf on Line 5. 4 SPa 144 (i) B) Calculate Fan Adjustment and enter on Line 6. 5) SPf 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.376 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes' or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(1) apply. EnergyPro 4.4 by EnergySoft User Number. 5678 Job Number 07.0021 Page 127 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008__ SYSTEM NAME DFC-3 FLOOR AREA 130 FAN POWER CONSUMPTION A B C I D E F DESIGN EFFICIENCY NUMBER I PEAK WATTS FAN DESCRIPTION BRAKE HPMOTOR DRIVE OF FANS B x E x 7461(C X D) _ Supply Fan 0.250 64.0% 97.0% 1.0 300 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A A) If filter pressure drop is greater than 1 inch W.C. enter 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 300 2) SUPPLY DESIGN AIRFLOW (CFM) 800 filter pressure drop. SPa on line 4 and Total Fan pressure 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)' SPf on Line 5. 144 (i) B) Calculate Fan Adjustment and enter on Line 6. 4 SPa 5) SPf 6) Fan Adjustment = 1-(SPa-1)ISPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)' 0.376. 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating ' Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(i) apply. EnergyPro 4.4 by EnergySoft User Number 5678 Job Number: 07.0021 Page: 128 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME FLOOR AREA FC -1 75 FAN POWER CONSUMPTION A B C D E F DESIGN EFFICIENCY NUMBER PEAK WATTS FAN DESCRIPTION BRAKE HPMOTOR DRIVE OF FANS B x E x 7461(C X D) Supply Fan 0.083 49.0% 97.0% 1.0 130 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A A) If filter pressure drop is greater than 1 inch W.C. enter filter pressure drop. SPa on line 4 and Total Fan pressure 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 130 — 2) SUPPLY DESIGN AIRFLOW (CFM) 595 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 SPf on Line 5. 144 (h) 4 SPa 144 (i) B) Calculate Fan Adjustment and enter on Line 6. _ 5) SPf 6) Fan Adjustment =1-(SPa-1)1SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.219 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) ------ PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 — T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) _ 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(i) apply. F— . nergyPro 4 4 by EnergySoft _ User Number: 5678_ Job Number 07.0021 Page 129 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME FLOOR AREA FC -2 1 19 FAN POWER CONSUMPTION A B C D E F DESIGN EFFICIENCY NUMBER PEAK WATTS FAN DESCRIPTION BRAKE HP MOTOR DRIVE OF FANS B x E x 7461(C X D) Supply Fan 0.450 66.0% 97.0% 1.0 524 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A A) If filter pressure drop is greater than 1 inch W.C. enter 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 524 2) SUPPLY DESIGN AIRFLOW (CFM) 1,400 _ filter pressure drop. SPa on line 4 and Total Fan pressure SPf on Line 5. 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 144 (i) 4 SPa B) Calculate Fan Adjustment and enter on Line 6. 5 SPf 6) Fan Adjustment =1-(SPa-1)ISPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.375 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(i) apply. EnergyPro 4.4 by EnergySoft User Number. 5678 Job Number: 07.0021 Page: 1360f 146 MECHANICAL SIZING AND FAN POWER MECH-4-C PROJECT NAME DATE Eisenhower Ambulates Care Center 10/17/2008 SYSTEM NAME FC -3 FLOOR AREA 262 FAN POWER CONSUMPTION A B C D E F DESIGN EFFICIENCY NUMBER PEAK WATTS FAN DESCRIPTION BRAKE HPMOTOR DRIVE OF FANS B x E x 7461(C X D) Supply Fan 0.380 66.0% 97.0% 1.0 443 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A A) If filter pressure drop is greater than 1 inch W.C. enter filter pressure drop. SPa on line 4 and Total Fan pressure 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 443 — 2) SUPPLY DESIGN AIRFLOW (CFM) 600 — 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)' SPf on Line 5. 144 (h) 4) SPa 144 (i) B) Calculate Fan Adjustment and enter on Line 6. 5) SPf 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)� 0.738' 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating ' Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exceptions) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes' or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(1) apply. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page 131 of 146 1 MECHANICAL SIZING AND FAN POWER MECH-4-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME FC -4 FLOOR AREA 1,133 FAN POWER CONSUMPTION A B C I D E F FAN DESCRIPTIONDESIGN EFFICIENCY NUMBER PEAK WATTS BRAKE HP MOTOR DRIVE OF FANS B x E x 7461(C X D) Supply Fan 0.730 76.0% 97.0% 1.0 739 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A A) If filter pressure drop is greater than 1 inch W.C. enter 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 739 2) SUPPLY DESIGN AIRFLOW (CFM) 1,900 ,900filter filter pressure drop. SPa on line 4 and Total Fan pressure 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 SPf on Line 5. 144 (i) B) Calculate Fan Adjustment and enter on Line 6. 4) SPa 5) SPf 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.389 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(1) apply. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page 132 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-C PROJECT NAME —DATE Total Adjustments Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME FC -5 FLOOR A 332 FAN POWER CONSUMPTION A B C I D E F DESIGN EFFICIENCY NUMBER PEAK WATTS FAN DESCRIPTION BRAKE HPMOTOR DRIVE OF FANS B x E x 746 / (C X D) Supply Fan 0.083 49.0% 97.0% 1.0 130 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.6 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A A) If filter pressure drop is greater than 1 inch W.C. enter filter pressure drop. SPa on line 4 and Total Fan pressure 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 130 2) SUPPLY DESIGN AIRFLOW (CFM) 595 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 144 (h) SPf on Line 5. 4 SPa 144 (i) B) Calculate Fan Adjustment and enter on Line 6. 5) SPf 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.219 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.6 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) — PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 - — T-24 Section Capacity -- Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(i) apply. r EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page 133 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-CI PROJECT NAME DATE Eisenhower Ambulatory _Care Center 10/17/2008 SYSTEM NAME FLOOR AREA FC -5A O3 FAN POWER CONSUMPTION A FAN DESCRIPTION Supply Fan B C D E F DESIGN BRAKE HP EFFICIENCY A) If filter pressure drop is greater than 1 inch W.C. enter NUMBER OF FANS PEAK WATTS B x E x 746 / (C X D) MOTOR DRIVE 0.125 55.0% 97.0% 1.0 175 5) SPf 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.228 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 175 -- 2) SUPPLY DESIGN AIRFLOW (CFM) 765 A) If filter pressure drop is greater than 1 inch W.C. enter filter pressure drop. SPa on line 4 and Total Fan pressure SPf on Line 5. 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 144 (i) B) Calculate Fan Adjustment and enter on Line 6. 4) SPa 5) SPf 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.228 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(i) apply. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number 07.0021 Page: 134 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-CI PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME FC -6 FLOOR AREA 12 FAN POWER CONSUMPTION A FAN DESCRIPTION Supply Fan B C D E F DESIGN BRAKE HP EFFICIENCY A) If filter pressure drop is greater than 1 inch W.C. enter NUMBER OF FANS PEAK WATTS B x E x 7461(C X D) MOTOR DRIVE 0.083 49.0% 97.0% 1.0 130 5) SPf 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.219 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 130 2) SUPPLY DESIGN AIRFLOW (CFM) 595 A) If filter pressure drop is greater than 1 inch W.C. enter 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Rw 2)1 o filter pressure drop. SPa on line 4 and Total Fan pressure SPf on Line 5. — B) Calculate Fan Adjustment and enter on Line 6. 4 SPa 5) SPf 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.219 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(1) apply. EnergyPro 4.4 by EnergySoft User Number 5678 Job Number: 07.0021 Page 135 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-CI PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME A FLOOR ARE04 FC -7 FAN POWER CONSUMPTION A B C I D E F FAN DESCRIPTION DESIGN EFFICIENCY NUMBER PEAK WATTS BRAKE HP MOTOR DRIVE OF FANS B x E x 746 / (C X D) Supply Fan 0.350 66.0% 97.0% 1.0 408 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A A) If filter pressure drop is greater than 1 inch W.C. enter 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 408 2) SUPPLY DESIGN AIRFLOW (CFM) 800 filter pressure drop. SPa on line 4 and Total Fan pressure SPf on Line 5. 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 B) Calculate Fan Adjustment and enter on Line 6. 4) SPa 5) SPf 6) Fan Adjustment= 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.510'' 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (ice 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(i) apply. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 136 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-C PROJECT NAME DATE _ Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME FLOOR AREA FC -7A 1,179 FAN POWER CONSUMPTION A B C I D E F FAN DESCRIPTION DESIGN EFFICIEN_ CY NUMBER PEAK WATTS BRAKE HP MOTOR DRIVE OF FANS B x E x 746 / (C X D) Supply Fan 0.125 55.0% 97.0% 1.0 175 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A A) If filter pressure drop is greater than 1 inch W.C. enter 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 175 2) SUPPLY DESIGN AIRFLOW (CFM) 765 filter pressure drop. SPa on line 4 and Total Fan pressure 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)' SPf on Line 5. 144 (i) B) Calculate Fan Adjustment and enter on Line 6. 4 SPa _ 5) SPf 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.228 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating ' Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(i) apply. _EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number. 07.0021 Page 137 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-CI PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAMEFLOOR AREA I'C-$S EFFICIENCY FAN POWER CONSUMPTION B C D E F 2) SUPPLY DESIGN AIRFLOW (CFM) DESIGN BRAKE HP EFFICIENCY 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 NUMBER OF FANS PEAK WATTS B x E x 7461(C X D) MOTOR DRIVE 0.083 49.0% 97.0% 1.0 130 5) SPf 6) Fan Adjustment =1-(SPa-1)ISPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.219 _ 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cIm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 130 2) SUPPLY DESIGN AIRFLOW (CFM) 595 A) If filter pressure drop is greater than 1 inch W.C. enter 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 filter pressure drop. SPa on line 4 and Total Fan pressure SPf on Line 5. B) Calculate Fan Adjustment and enter on Line 6. 4 SPa 5) SPf 6) Fan Adjustment =1-(SPa-1)ISPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.219 _ 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cIm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating ' Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes' or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(i) apply. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 138 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-CI PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME FC -9 FLOOR AREA 846 FAN POWER CONSUMPTION A FAN DESCRIPTION Supply Fan B C D E F DESIGN BRAKE HP EFFICIENCY A) If filter pressure drop is greater than 1 inch W.C. enter NUMBER OF FANS PEAK WATTS B x E x 746 / (C X D) MOTOR DRIVE 0.100 49.0% 97.0% 1.0 157 5) SPf 6) Fan Adjustment =1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.245 _ 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 157 2) SUPPLY DESIGN AIRFLOW (CFM) 640 A) If filter pressure drop is greater than 1 inch W.C. enter filter pressure drop. SPa on line 4 and Total Fan pressure SPf on Line 5. 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 _ 144 (i) B) Calculate Fan Adjustment and enter on Line 6. 4 SPa 5) SPf 6) Fan Adjustment =1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.245 _ 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) _ 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(1) apply. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 139 of 146 MECHANICAL SIZING AND FAN POWER PROJECT NAME Eisenhower Arnbulatmy Care Center SYSTEM NAME — FC -10 FILTER PRESSURE ADJUSTMENT EQUATION 144-A A) If filter pressure drop is greater than 1 inch W.C. enter filter pressure drop. SPa on line 4 and Total Fan pressure SPf on Line 5. B) Calculate Fan Adjustment and enter on Line 6 C) Calculate Adjusted Fan Power Index and enter on Line 7 MECH-4-CI DATE 10/17/2008 FLOOR AREA 189 B C D E F DESIGN BRAKE HP 0.500 EFFICIENCY NUMBER OF FANS PEAK WATTS B x E x 746 / (C X D) MOTOR DRIVE 76.0% 97.0% 1.0 506 Total Adjustments 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 506 2) SUPPLY DESIGN AIRFLOW (CFM) 800 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 4 SPa 5) SPf 6) Fan Adjustment = 1 -(SP, -1)/SPf 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.632 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAGS) PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section - Capacity --- Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(i) apply. 4.4 b Ener Soft --- Y 9Y User Number: 5678 - ---- --- _______ _____User Number: 07.0021 Page:140 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME AH -1 FLOOR R 692 FAN POWER CONSUMPTION A FAN DESCRIPTION Supply Fan Return Fan B C I D E F DESIGN BRAKE HP EFFICIENCY A) If filter pressure drop is greater than 1 inch W.C. enter NUMBER OF FANS PEAK WATTS B x E x 7461(C X D) MOTOR DRIVE 22.300 91.0% 97.0% 1.0 18,846 8.710 88.5% 97.0% 1.0 7,569 C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 1.201 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 26,416 2) SUPPLY DESIGN AIRFLOW (CFM) 22,000 A) If filter pressure drop is greater than 1 inch W.C. enter 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 filter pressure drop. SPa on line 4 and Total Fan pressure SPf on Line 5. 13) Calculate Fan Adjustment and enter on Line 6. 4 SPa 5) SPf 6) Fan Adjustment= 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 1.201 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(i) apply. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page: 141 of 146 (MECHANICAL SIZING AND FAN POWER MECH-4-CI PROJECT NAME DATE Eisenhower Ambulatory Care Center_ 10/17/2008 SYSTEM NAME AH -2 FLOOR AREA 11,252 FAN POWER CONSUMPTION A FAN DESCRIPTION Supply Fan Return Fan B DESIGN BRAKE HP 21.360 7.150 C I D EFFICIENCY MOTOR DRIVE 91.0% 97.0% 87.5% 97.0% 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 filter pressure drop. SPa on line 4 and Total Fan pressure SPf on Line 5. B) Calculate Fan Adjustment and enter on Line 6. 4 SPa E NUMBER OF FANS 1.0 1.0 PEAK WATTS BxEx7461(CXD)' 18,052 1 6,2841 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) —24,336 2) SUPPLY DESIGN AIRFLOW (CFM) 21,000 A) If filter pressure drop is greater than 1 inch W.C. enter 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 filter pressure drop. SPa on line 4 and Total Fan pressure SPf on Line 5. B) Calculate Fan Adjustment and enter on Line 6. 4 SPa 5) SPf 6) Fan Adjustment= 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 1.159 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(i) apply. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number 07.0021 Page. 142 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME AH -3 FLOOR AREA 7,846 FAN POWER CONSUMPTION A B C D E F FAN DESCRIPTION DESIGN BRAKE HP EFFICIENCY SPf on Line 5. NUMBER OF FANS PEAK WATTS B x E x 7461(C X D) MOTOR DRIVE Supply Fan 10.890 89.5% 97.0% 1.0 9,358 Return Fan 4.400 86.5% 97.00 1.0 3,912 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S)_ Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A A) If filter pressure drop is greater than 1 inch W.C. enter filter pressure drop. SPa on line 4 and Total Fan pressure 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 13,270 2) SUPPLY DESIGN AIRFLOW (CFM) 13,000 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 SPf on Line 5. 144 (h) 4 SPa 144 (i) B) Calculate Fan Adjustment and enter on Line 6. 5) SPf 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 1.021 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S)_ PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(1) apply. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page. 143 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME AH -4 FLOOR AREA 16,423 FAN POWER CONSUMPTION A FAN DESCRIPTION Supply Fan Return Fan B C D ___E_7 F DESIGN BRAKE HP EFFICIENCY NUMBER OF FANS PEAK WATTS B x E x 7461(C X D) MOTOR DRIVE 17.750 91.0% 97.0% 1.0 15,001 6.030 87.5% 97.0% 1.0 5,300 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 1.194 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A A) If filter pressure drop is greater than 1 inch W.C. enter 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 20,301 2) SUPPLY DESIGN AIRFLOW (CFM) 17,000 filter pressure drop. SPa on line 4 and Total Fan pressure SPf on Line 5. 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 B) Calculate Fan Adjustment and enter on Line 6. 4 SPa 5) SPf 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 1.194 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(i) apply. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page. 144 of 146 MECHANICAL SIZING AND FAN POWER MECH-4-C PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME AH -5 FLOOR AREA 20,090 FAN POWER CONSUMPTION A B C D E F FAN DESCRIPTION DESIGN BRAKE HPMOTOR EFFICIENCY filter pressure drop. SPa on line 4 and Total Fan pressure NUMBER OF FANS PEAK WATTS B x E x 746 / (C X D) SPf on Line 5. DRIVE Supply Fan 31.220 92.4% 97.0% 1.0 25,985 Return Fan 10.470 89.5% 97.0% 1.0 8,997 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 1.296 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A A) If filter pressure drop is greater than 1 inch W.C. enter 1) TOTAL FAN SYSTEM POWER (Watts, Sum Column F) 34,982 2) SUPPLY DESIGN AIRFLOW (CFM) 27,000 - filter pressure drop. SPa on line 4 and Total Fan pressure 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 SPf on Line 5. -- -- 144 (i) B) Calculate Fan Adjustment and enter on Line 6. 4 SPa 5) SPf 6) Fan Adjustment = 1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 1.296 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) _-- PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(1) apply. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number. 07.0021 Page 145 of 146 MECHANICAL SIZING AND FAN POWER MECH-44 PROJECT NAME DATE Eisenhower Ambulatory Care Center 10/17/2008 SYSTEM NAME AH -6 FLOOR AREA 2,957 FAN POWER CONSUMPTION B DESIGN BRAKE HP 5.000 3.000 E NUMBER OF FANS 1.0 1.0 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) Total Adjustments FILTER PRESSURE ADJUSTMENT EQUATION 144-A 1) TOTAL FAN SYSTEM POWER (Wafts, Sum Column F) Exception 2) SUPPLY DESIGN AIRFLOW (CFM) -7062 4,000 A) If filter pressure drop is greater than 1 inch W.C. enter 3) TOTAL FAN SYSTEM POWER INDEX (Row 1/Row 2)1 filter pressure drop. SPa on line 4 and Total Fan pressure SPf on Line 5. B) Calculate Fan Adjustment and enter on Line 6. 4 SPa 5) SPf 6) Fan Adjustment =1-(SPa -1)/SPf C) Calculate Adjusted Fan Power Index and enter on Line 7. 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 1.766'. 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for VAV systems. ITEM or SYSTEM TAG(S) PRESCRIPTIVE MEASURES Electric Resistance Heating 1 Heat Rejection System 2 Air Cooled Chiller Limitation 3 T-24 Section Capacity Exception Notes 144 (g) 144 (h) 144 (i) 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used, explain which exception(s) to Section(g) apply. 2. Are centrifugal fan cooling towers used on this project? (Enter "Yes" or "No") If centrifugal fan cooling tower are used, explain which exception(s) to Section 144(h) apply. 3. Total installed capacity (tons) of all water and air cooled chillers under this permit. If there are more than 100 tons of air-cooled chiller capacity being installed, explain which exception(s) to Section 144(i) apply. EnergyPro 4.4 by EnergySoft User Number: 5678 Job Number: 07.0021 Page 146 of 146