BRES2019-034478-495 CALLE TAMPICO D "i-iIRA+CLI VOICE (760) 777-7125
LA QUINTA, CALIFORNIA 92253 FAX (760) 777-7011
DESIGN & DEVELOPMENT DEPARTMENT INSPECTIONS (760) 777-7153
BUILDING PERMIT
Date: 2/13/2020
Permit Type/Subtype: BUILDING RESIDENTIAL/ADDITION Owner:
Application Number: BRES2019-0344 Desert Homes Inc / Trinita Speranza Inc
Property Address: 53145 EISENHOWER DR 53145 EISENHOWER DR
APN: 774055017 LA QUINTA, CA 92253
Application Description: GERTSMAN / 209SF KITCHEN ADDITION
Property Zoning:
Application Valuation: $35,000.00
Applicant: Contractor:
BRUCE BARTER D
BRUCE BARTER
77 TORREMOLINOS 77 TORREMOLINOS
RANCHO MIRAGE, CA 92270 ED 13 2Q20 RANCHO MIRAGE, CA 92270
0 F
(760)851-7356
CITY OF LA QUINTA Llc. No.: 931031
DESIGN & DEVELOPMENT DEPARTMENT
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9
(commencing with Section 7000) of Division 3 of the B mesrancF ions Code, and
my License is in full force and effect.
License Class: B License No.: 931031
1Pt- 1 3 1-0 Contractor:
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State
License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any
city or county that requires a permit to construct, alter, improve, demolish, or repair any
structure, prior to its issuance, also requires the applicant for the permit to file a signed
statement that he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business
and Professions Code) or that he or she is exempt therefrom and the basis for the
alleged exemption. Any violation of Section 7031.5 by any applicant for a permit
subjects the applicant to a civil penalty of not more than five hundred dollars ($500).:
(_) I, as owner of the property, or my employees with wages as their sole
compensation, will do the work, and the structure is not intended or offered for sale.
(Sec. 7044, Business and Professions Code: The Contractors' State License Law does not
apply to an owner of property who builds or improves thereon, and who does the work
himself or herselfthrough his or her own employees, provided that the improvements
are not intended or offered for sale. If, however, the building or improvement is sold
within one year of completion, the owner -builder will have the burden of proving that he
or she did not build or improve for the purpose of sale.).
(_) I, as owner of the property, am exclusively contracting with licensed contractors to
construct the project. (Sec. 7044, Business and Professions Code: The Contractors' State
License Law does not apply to an owner of property who builds or improves thereon,
and who contracts for the projects with a contractor(s) licensed pursuant to the
Contractors' State License Law.).
(_) I am exempt under Sec. , B.&P.C. for this reason
Date: Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for
the performance of the work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's Address:
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
I have and will maintain a certificate of consent to self -insure for workers'
mpensation, as provided for by Section 3700 of the Labor Code, for the performance
of the work for which this permit is issued.
I have and will maintain workers' compensation insurance, as required by
Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued. My workers' compensation insurance carrier and policy number are:
Carr i r XEMPT Policy Number: _
j I certify that in the performance of the work for which this permit is issued, I
shall not employ any person in any manner so as to become subject to the workers'
compensation laws of California, and agree that, if I should become subject to the
workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith
comply with those provisions.
Dall�l j Applicant:.
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL,
AND SHALL SUBJECTAN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO
ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF
COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE,
INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT: Application is hereby made to the Building Official for a permit subject to
the conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose
request and for whose benefit work is performed under or pursuant to any permit issued
as a result of this application , the owner, and the applicant, each agrees to, and shall
defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and
employees for any act or omission related to the work being performed under or
following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not
commenced within 180 days from date of issuance of such permit, or cessation of work
for 180 days will subject permit to cancellation.
I certify that I have read this application and state that the above information is correct.
I agree to comply with all city and county ordinances and state laws relating to building
construction, and hereby authorize representatives of this city to oat a above -
mentioned property for inspection purposes.
Date: Z /a 2-0 Signature (Applicant or Agent)
Date: 2/13/2020
Application Number:
BRES2019-0344
Property Address:
53145 EISENHOWER DR
APN:
774055017
Application Description-
GERTSMAN / 209SF KITCHEN ADDITION
Property Zoning:
Application Valuation:
$35,000.00
Applicant:
BRUCE BARTER
77 TORREMOLINOS
RANCHO MIRAGE, CA 92270
Owner:
Desert Homes Inc / Trinita Speranza Inc
53145 EISENHOWER DR
LA QUINTA, CA 92253
Contractor:
BRUCE BARTER
77 TORREMOLINOS
RANCHO MIRAGE, CA 92270
(760)851-7356
Llc. No.: 931031
Detail: 209SF ADDITION TO MAIN DWELLING AND 110SF PATIO [ENGINEERED] THIS PERMIT DOES NOT INCLUDE REMODEL TO THE EXISTING DWELLING,
OR CHANGEOUT OF EXISTING MECHANICAL EQUIPMENT OR WATER HEATERS. 2016 CALIFORNIA BUILDING CODES
FINANCIAL
DESCRIPTION
INFORMATION
ACCOUNT
CITY
AMOUNT
ADDITION, FIRST 100 SF
101-0000-42400
0
$134.48
DESCRIPTION
ACCOUNT
CITY
AMOUNT
ADDITION, FIRST 100 SF PC
101-0000-42600
0
$188.92
Total Paid for ADDITION 2018: $323.40
DESCRIPTION
ACCOUNT
CITY
AMOUNT
INVESTIGATION FEE
101-0000-42400
1
$295.48
DESCRIPTION
ACCOUNT
CITY
AMOUNT
INVESTIGATION FEE PC
101-0000-42600
1
$268.88
Total Paid for ADMINISTRATIVE: $564.36
DESCRIPTION
ACCOUNT
CITY
AMOUNT
101-0000-42600
($80.00)
DESCRIPTION
ACCOUNT
CITY
AMOUNT
HOURLY CHARGE - CITY BUILDING STAFF
101-0000-42600
1
$161.00
DESCRIPTION
ACCOUNT
CITY
AMOUNT
HOURLY CHARGE - INTERWEST PLANS EXAMINER
101-0000-42600
0.8
$80.00
Total Paid for BLDG CITY STAFF - PER HOUR: $161.00
DESCRIPTION
ACCOUNT
CITY
AMOUNT
BSAS SB1473 FEE
101-0000-20306
0
$2.00
Total Paid for BUILDING STANDARDS ADMINISTRATION BSA: $2.00
DESCRIPTION
ACCOUNT
CITY
AMOUNT
RESIDENTIAL, FIRST 1,000SF
101-0000-42403
0
$161.00
DESCRIPTION
ACCOUNT
CITY
AMOUNT
RESIDENTIAL, FIRST 1,000SF PC
101-0000-42600
0
$53.13
Total Paid for ELECTRICAL - NEW CONSTRUCTION 2019: $214.13
DESCRIPTION
ACCOUNT
CITY
AMOUNT
PLAN CHECK DEPOSIT- RESIDENTIAL
101-0000-42600
1
$125.00
Total Paid for PLAN CHECK DEPOSIT - RESIDENTIAL: $125.00
DESCRIPTION
ACCOUNT
CITY
AMOUNT
FIXTURE/TRAP
101-0000-42401
0
$13.42
DESCRIPTION
ACCOUNT
CITY
AMOUNT
FIXTURE/TRAP
101-0000-42401
0
$13.42
DESCRIPTION
ACCOUNT
CITY
AMOUNT
FIXTURE/TRAP PC
101-0000-42600
0
$13.42
DESCRIPTION
ACCOUNT
CITY
AMOUNT
FIXTURE/TRAP PC
101-0000-42600
0
$13.42
DESCRIPTION
ACCOUNT
CITY
AMOUNT
GAS SYSTEM, 1-4 OUTLETS
101-0000-42401
0
$13.42
DESCRIPTION
ACCOUNT
CITY
AMOUNT
GAS SYSTEM, 1-4 OUTLETS
101-0000-42401
0
$13.42
ta QaiAra
- 111;M „r rFr lrF, F RV -
PERMIT #
PLAN LOCATION:
Project Address: C ' S j� 0 HW
t J L
fyroject Description: ter�l, Add't, Elect, Plumb, Mech
APN #:
Applicant Name:
Address: ( P'y' e , 1A
City, ST, Zip: �'(�'
Telephone: 76 o, 5—r 7.3 S
Email: bat4ifo Uf1oiPrS' /raI116+ValuationofProject,.%
ContractorName: �j�
' 1"
New SFD Construction:
Address: C A---S
Conditioned Space SF
City, St, Zip
Garage SF
Telephone:
Patio/Porch SF
Email:
Fire Sprinklers SF
State Lic: 13
l 6� 1 City Bus Lic:
Arch/Eng Name:
Construction Type: Occupancy:
Address:
Grading:
City, St, Zip
Telephone:
Bedrooms:
Stories: # Units:
Email:
State Lic: City Bus Lic:
Property Owner's Name: M i'
New Commercial / Tenant Improvements:
Address:
Total Building SF
City, ST, Zip �� e
Construction Type: Occupancy:
Telephone:
Email-
78495 CALLE TAMPICO
LA QUINTA, CA 92253
760-777-7000
BUILDING ENERGY ANALYSIS REPORT
PROJECT:
GERTSMAN RESIDENCE's addition
53145 EINSENHOWER DR
LA QUINTA, CA 92253
Project Designer:
GLS ARCHITECTURE GROUP INC.
74991 JONI DR#9
PALM DESERT, CA 92260
RECEIVED 760 340.3528
OCT 17 2019 Report Prepared by:
CITY OF LADESIGN AND D&E�OPMENT QUINTA
Armando Chavez
DEPARTMENT 7
44890 SEELEY CITY OF LA QUINTA
LA QUINTA, CA 922 3 BUILDING DIVISION
760 278.1840 REVIEWED FOR
CODE
COMPLIANCE
DATES 1 i V0 RY 4 Ay*a&4G`
0-FTIC-e-
Job Number:
19 - GLS - 093 /095
RECEIVED
Date:
0 C T 18 2019
10/1 /2019
INTERWEST
CONSULTING GROUP
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2016 Building Energy Efficiency Standards.
This program developed by EnergySoft Software — www.energysoft.com.
I TABLE OF CONTENTS
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: GERTSMAN ADD. Calculation Date/Time: 17:01, Tue, Oct 01, 2019
CFI R-PRF-01
Page 1 of 9
Calculation Description: Title 24 Analysis
Input File Name: 095 - 53145 EINSENHOWER.ribd16x
GENERAL INFORMATION
01
Project Name
GERTSMAN ADD.
02
Calculation Description
Title 24 Analysis
03
Project Location
53145 EINSENHOWER DR
04
City
LA QUINTA
05
Standards Version
Compliance 2017
06
Zip Code
92253
07
Compliance Manager Version
BEMCmpMgr 2016.3.1 (1149)
08
Climate Zone
CZ15
09
Software Version
CBECC-Res 2016.3.1 (1019)
10
Building Type
Single Family
11
Front Orientation (deg/Cardinal)
0
12
Project Scope
Addition and/or Alteration
13
Number of Dwelling Units
1
14
Total Cond. Floor Area (ft)
1409
15
Number of Zones
2
16
Slab Area (ftZ)
1409
17
Number of Stories
1
18
Addition Cond. Floor Area (ftZ)
209
19
Natural Gas Available
Yes
20
Addition Slab Area (ftZ)
209
21
Glazing Percentage (%)
14.8%
COMPLIANCE RESULTS
01
Building Complies with Computer Performance
02
This building DOES NOT require HERS Verification
03
This building incorporates one or more Special Features shown below
ENERGY USE SUMMARY
04
05
06
07
08
Energy Use (kTDV/ftZ-yr)
Standard Design
Proposed Design
Compliance Margin
Percent Improvement
Space Heating
5.27
5.61
-0.34
-6.5%
Space Cooling
289.31
287.77
1.54
0.5%
IAQ Ventilation
0.00
0.00
0.00
0.0%
Water Heating
19.41
19.41
0.00
0.0%
Photovoltaic Offset
— -
0.00
0.00
----
Compliance Energy Total
313.99
312.79
1.20
0.4%
REQUIRED SPECIAL FEATURES
The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis.
• Window overhangs and/or fins
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-06232018-1149 Report Generated at: 2019-10-01 17:01:50
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: GERTSMAN ADD. Calculation Daterrime: 17:01, Tue, Oct 01, 2019
CF1 R-PRF-01
Page 2 of 9
Calculation Description: Title 24 Analysis
Input File Name: 095 - 53145 EINSENHOWER.ribdl6x
HERS FEATURE SUMMARY
The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is
provided in the building components tables below.
Building -level Verifications:
--None--
Cooling System Verifications:
-- None --
HVAC Distribution System Verifications:
- -- None --
Domestic Hot Water System Verifications:
- --None --
BUILDING - FEATURES INFORMATION
01
02
03
04
05
06
07
Project Name
Conditioned Floor Area (ft2)
Number of Dwelling
Units
Number of Bedrooms
Number of Zones
Number of Ventilation
Cooling Systems
Number of Water
Heating Systems
GERTSMAN ADD.
1409
1
4
2
0
1
ZONE INFORMATION
01
02
03
04
05
06
07
Zone Name
Zone Type
HVAC System Name
Zone Floor Area
(ft)
Avg. Ceiling
Height
Water Heating System 1
Water Heating System 2
Z- 1
Conditioned
A-AC-1
1200
8
DHW Sys 1
n/a
Z- 2
Conditioned
A-AC-1
209
8
DHW Sys 1
n/a
Registration Number: Registration Datef Fime: HERS Provider:
CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-06232018-1149 Report Generated at: 2019-10-01 17:01:50
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: GERTSMAN ADD. Calculation Date/Time: 17:01, Tue, Oct 01, 2019
CF1 R-PRF-01
Page 3 of 9
Calculation Description: Title 24 Analysis
Input File Name: 095 - 53145 EINSENHOWER.ribd16x
OPAQUE SURFACES
01
02
03
04
05
06
07
08
09
10
11
Name
Zone
Construction
Azimuth
Orientation
Gross Area
(ft2)
Window & Door
Area (ft2)
Tilt
(deg)
Wall
Exception
Status
Verified
Existing
Condition
N - 245
Z- 1
Def Wall Prior to 78
0
Front
245
24
90
n/a
Existing
No
E - 175
Z- 1
Def Wall Prior to 78
90
Left
175
37.3325
90
n/a
Existing
No
S - 245
Z- 1
Def Wall Prior to 78
180
Back
245
30.002
90
n/a
Existing
No
W - 170
Z- 1
Def Wall Prior to 78
270
Right
170
68
90
n/a
Existing
No
TO GARAGE
Z- 1 »Z- 2
Def Wall Prior to 781
144
0
n/a
Existing
No
1200
Z- 1
Def Roof Prior to '78
1200
n/a
Existing
No
N - 92
Z- 2
R-15 Wall --
0
Front
92
0
90
none
New
n/a
E - 146
Z- 2
R-15 Wall --
90
Left
146
45.6658
90
none
New
n/a
S - 92
Z- 2
R-15 Wall --
180
Back
92
24
90
none
New
n/a
209
Z- 2
R-33 FOAM R.R.
209
n/a
New
n/a
ATTIC
01
02
03
04
05
06
07
08
09
10
Name
Construction
Type
Roof Rise
Roof
Reflectance
Roof
Emittance
Radiant
Barrier
Cool
Roof
Status
Verified Existing
Condition
Attic Z- 1
Attic RoofZ- 1
Ventilated
0
0.1
0.85
No
No
Existing
No
Attic Z- 2
Attic RoofZ- 2
Ventilated
1
0.1
0.85
No
No
New
No
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-06232018-1149 Report Generated at: 2019-10-01 17:01:50
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: GERTSMAN ADD. Calculation Date/Time: 17:01, Tue, Oct 01, 2019
CF1 R-PRF-01
Page 4 of 9
Calculation Description: Title 24 Analysis
Input File Name: 095 - 53145 EINSENHOWER.ribd16x
FENESTRATION / GLAZING
01
02
03
04
05
06
07
08
09
10
11
Name
Surface (Orientation -Azimuth)
Width (ft)
Height (ft)
Multiplier
Area (ft2)
U-factor
SHGC
Exterior Shading
Status
Verified
Existing
Condition
6040
N - 245 (Front-0)
6.0
4.0
1
24.0
0.71
0.73
Insect Screen (default)
Existing
No
4010
E - 175 (Left-90)
4.0
1.0
1
4.0
0.71
0.73
Insect Screen (default)
Existing
No
5068
E - 175 (Left-90)
5.0
6.7
0.995
33.3
0.71
0.73
Insect Screen (default)
Existing
No
3020
S - 245 (Back-180)
3.0
2.0
1
6.0
0.71
0.73
Insect Screen (default)
Existing
No
2020
S - 245 (Back-180)
3.0
2.0
0.667
4.0
0.71
0.73
Insect Screen (default)
Existing
No
5040
S - 245 (Back-180)
5.0
4.0
1
20.0
0.71
0.73
Insect Screen (default)
Existing
No
8040
W - 170 (Right-270)
8.0
4.0
1
32.0
0.71
0.73
Insect Screen (default)
Existing
No
4040
W - 170 (Right-270)
4.0
4.0
1
16.0
0.71
0.73
Insect Screen (default)
Existing
No
2668
E - 146 (Left-90)
2.5
6.7
0.995
16.7
0.29
0.23
Insect Screen (default)
New
n/a
3068
E - 146 (Left-90)
2.5
6.7
1.194
20.0
0.29
0.23
Insect Screen (default)
New
n/a
3030
E - 146 (Left-90)
3.0
3.0
1
9.0
0.29
0.23
Insect Screen (default)
New
n/a
8030
S - 92 (Back-180)
8.0
3.0
1
24.0
0.29
0.23
Insect Screen (default)
New
n/a
OPAQUE DOORS
01
02
03
04
05
06
Name
Side of Building
Area (ft2)
U-factor
Status
Verified Existing Condition
30682
W - 170
20.0
0.50
Existing
No
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-06232018-1149 Report Generated at: 2019-10-01 17:01:50
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: GERTSMAN ADD. Calculation Date/Time: 17:01, Tue, Oct 01, 2019
CF1 R-PRF-01
Page 5 of 9
Calculation Description: Title 24 Analysis
Input File Name: 095 - 53145 EINSENHOWER.ribdl6x
OVERHANGS AND FINS
01
02
03 04
05
06
07 08
09
10
11
12
13
14
Overhang
Left Fin
Right Fin
Window
Depth
Dist Up
Left
Extent
Right
Extent
Flap Ht.
Depth
Top Up
Dist L
Bot Up
Depth
Top Up
Dist R
Bot Up
6040
2
0.1
2
2
0
0
0
0
0
0
0
0
0
4010
2
0.1
2
2
0
0
0
0
0
0
0
0
0
5068
2
0.1
2
2
0
0
0
0
0
0
0
0
0
3020
2
0.1
2
2
0
0
0
0
0
0
0
0
0
2020
2
0.1
2
2
0
0
0
0
0
0
0
0
0
5040
2
0.1
2
2
0
0
0
0
0
0
0
0
0
8040
2
0.1
2
2
0
0
0
0
0
0
0
0
0
4040
10
0.1
10
10
0
0
0
0
0
0
0
0
0
2668
6
0.1
6
6
0
0
0
0
0
0
0
0
0
3068
6
0.1
6
6
0
0
0
0
0
0
0
0
0
3030
6
0.1
6
6
0
0
0
0
0
0
0
0
0
8030
2
0.1
2
2
0
0
0
0
0
0
0
0
0
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-06232018-1149 Report Generated at: 2019-10-01 17:01:50
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: GERTSMAN ADD. Calculation Date/Time: 17:01, Tue, Oct 01, 2019
CF1 R-PRF-01
Page 6 of 9
Calculation Description: Title 24 Analysis
Input File Name: 095 - 53145 EINSENHOWER.ribd16x
OPAQUE SURFACE CONSTRUCTIONS
01
02
03
04
05
06
07
Total Cavity
Winter Design
Construction Name
Surface Type
Construction Type
Framing
R-value
U-factor
Assembly Layers
• Cavity / Frame: no insul. / 2x4 Top Chrd
2x4 Top Chord of Roof Truss @ 24
Roof Deck: Wood Siding/sheathing/decking
Attic RoofZ- 1
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.644
Roofing: Light Roof (Asphalt Shingle)
Inside Finish: Gypsum Board
Ceilings (below
Cavity/Frame: R-9.1 /2x4
Def Roof Prior to '78
attic)
Wood Framed Ceiling
2x4 @ 16 in. O.C.
R 11
0.083
Over Ceiling Joists: R-1.9 insul.
• Inside Finish: Gypsum Board
• Cavity / Frame: no insul. / 2x4
Def Wall Prior to 78
Exterior Walls
Wood Framed Wall
2x4 @ 16 in. O.C.
none
0.361
Exterior Finish: 3 Coat Stucco
Inside Finish: Gypsum Board
Cavity/Frame: no insul. /2x4
Def Wall Prior to 781
Interior Walls
Wood Framed Wall
2x4 @ 16 in. O C.
none
0.277
Other Side Finish: Gypsum Board
• Cavity/Frame: no insul. /2x4 Top Chrd
2x4 Top Chord of Roof Truss @ 24
Roof Deck: Wood Siding/sheathing/decking
Attic RoofZ- 2
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.633
Roofing: 5 PSF (Normal Gravel)
• Inside Finish: Gypsum Board
Ceilings (below
Cavity/Frame: R-14.3/2x6
R-33 FOAM R.R.
attic)
Wood Framed Ceiling
2x6 @ 16 in. O.C.
R 33
0.030
Over Ceiling Joists: R-18.7 insul.
Inside Finish: Gypsum Board
Cavity / Frame: R-15 / 2x4
R-15 Wall --
Exterior Walls
Wood Framed Wall
2x4 @ 16 in. O.C.
R 15
0.095
Exterior Finish: 3 Coat Stucco
SLAB FLOORS
01
02
03
04
05
06
07
08
09
Verified
Perimeter
Carpeted
Existing
Name
Zone
Area (ft)
(ft)
Edge Insul. R-value
Fraction
Heated
Status
Condition
12002
Z- 1
1200
0.1
None
0.8
No
Existing
No
2092
Z- 2
209
0.1
None
0.8
No
New
No
BUILDING ENVELOPE - HERS VERIFICATION
01
02
03
04
Quality Insulation Installation (QII)
Quality Installation of Spray Foam Insulation
Building Envelope Air Leakage
CFM50
Not Required
Not Required
Not Required
n/a
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-06232018-1149 Report Generated at: 2019-10-01 17:01:50
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: GERTSMAN ADD. Calculation Date/Time: 17:01, Tue, Oct 01, 2019
CF1 R-PRF-01
Page 7 of 9
Calculation Description: Title 24 Analysis
Input File Name: 095 - 53145 EINSENHOWER.ribdl6x
WATER HEATING SYSTEMS
01
02
03
04
05
06
07
08
Name
System Type
Distribution Type
Water Heater
Number of
Heaters
Solar
Fraction
(%)
Status
Verified Existing
Condition
DHW Sys 1
DHW
Standard
DHW Heater 1
1
0
Existing
No
WATER HEATERS
01
02
03
04
05
06
07
08
09
10
11
12
Input Rating /
Tank
Standby
Heater
Tank
Uniform Energy
Pilot /
Insulation
Loss /
First Hour
Tank Location
Element
Number
Volume
Factor / Energy
Thermal
R-value
Recovery
Rating I
NEEA Heat Pump
or Ambient
Name
Type
Tank Type
of Units
(gal)
Factor / Efficiency
Efficiency
(Int/Ext)
Eff
Flow Rate
Brand / Model
Condition
DHW Heater 1
Gas
Small Storage
1
50
0.527 EF
— 75 kBtu/hr
0
n/a
n/a
n/a
n/a
SPACE CONDITIONING SYSTEMS
01
02
03
04
05
06
07
08
SC Sys Name
System Type
Heating Unit Name
Cooling Unit Name
Fan Name
Distribution
Name
Status
Verified Existing
Condition
FA-AC-1
Other Heating and Cooling
System
Heating Component 1
Cooling Component 1
HVAC Fan 1
Air Distribution
System 1
Existing
No
HVAC - DISTRIBUTION SYSTEMS
01
02
03
04
05
06
07
08
09
10
Insulation
Supply Duct
Return Duct
Verified Existing
HERS
Name
Type
Duct Leakage
R-value
Location
Location
Bypass Duct
Status
Condition
Verification
Air Distribution
Ducts located in attic
Existing (not
System 1
(Ventilated and
specified)
4.2
Attic
Attic
None
Existing
No
n/a
Unventilated)
IAQ (Indoor Air Quality) FANS
01
02
03
04
05
06
Dwelling Unit
IAQ CFM
IAQ WattsICFM
IAQ Fan Type
IAQ Recovery
Effectiveness(%)
HERS Verification
SFam IAQVentRpt
0
0.25
Default
0
Not Required
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-06232018-1149 Report Generated at: 2019-10-01 17:01:50
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: GERTSMAN ADD. Calculation Date/Time: 17:01, Tue, Oct 01, 2019
CF1 R-PRF-01
Page 8 of 9
Calculation Description: Title 24 Analysis
Input File Name: 095 - 53145 EINSENHOWER.ribdl6x
PROJECT NOTES
--ALL INPUT DATA. HVAC EQUIPMENT, WATER HEATER EQUIP, USED IN THIS CALCULATION WAS PROVIDED BY THE PLANS PREPARER. ANY ALTERATION OR DEVIATION FROM THIS
CALCULATION WILL BE GENERAL CONTRACTOR RESPONSABILITY. -• AC CONTRACTOR SHALL VERIFY LOAD CALCULATIONS AND AC SIZING. HVAC LOADS PROVIDED IN THIS
DOCUMENT ARE APROXIMATE CALCULATIONS. -- ANY REVISION/CHANGE SHALL BE NOTIFIED TO THE ENERGY CONSULTANT TO REVISE COMPLIANCE WITH THE STANDARDS
PRIOR OF HVAC EQUIPMENT ORDER.
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-06232018-1149 Report Generated at: 2019-10-01 17:01:50
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: GERTSMAN ADD. Calculation Date/Time: 16:58, Tue, Oct 01, 2019
CFI R-PRF-01
Page 9 of 9
Calculation Description: Title 24 Analysis
Input File Name: 095 - 53145 EINSENHOWER.ribd16x
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
Documentation Author Signature:
Armando Chavez
Signature Date:
Company:
10/1 /2019
Address: 44890 SEELEY
CEA/HERS Certification Identification (If applicable):
city/Stat'CR:OUINTA, CA 92253
Phone:
760 278.1840
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance.
2. 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
3. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit applica
Responsible De ner Name:
Rl1M ROMERO
Responsible Designer Signature:
Company:
GLS ARCHITECTURE GROUP INC.
Date Signed:
10/1/2019
Address:74991 JONI DR #9
License:
N/A
City/State/Z :
P,�LM DESERT, CA 92260
Phone:
760 340.3528
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2016 Residential Compliance Report Version - CF1 R-07312017-695 Report Generated at: 2019-10-01 16:59:17
RESIDENTIAL MEASURES SUMMARY
RMS-1
Project Name
GERTSMAN RESIDENCE'S
Project Address
53145 EINSENHOWER DR
addition
LA QUINTA
Building Type 10 Single Family ❑ Addition Alone
❑ Multi Family m Existing+ Addition/Alteration
California Energy Climate Zone Total Cond. Floor Area Addition
CA Climate Zone 15 1,409209
Date
101112019
# of Units
FI
INSULATION
Construction Type
Cavity
Area
(ft2 Special Features
Status
Slab Unheated Slab -on -Grade
Roof Wood Framed Attic
- no insulation
R 11
1,200 Perim = 0'
1,200
Existing
Existing
Wall Wood Framed
no insulation
820
Existing
Door Opaque Door
- no insulation
20
Existing
Slab Unheated Slab -on -Grade
no insulation
209 Perim = 0'
New
Roof Wood Framed Attic
R 38
209
New
Wall Wood Framed
R 15
260
New
FENESTRATION
Orientation Area(ff)
LTotal Area:
U-Fac
209 Glazing Percentage: 14.8% New/Altered Avers a L1-Factor.
SHGC Overhang Sidefins Exterior Shades
0.2s
Status
Front (N) 24.0
0.710
0.73 2.0
none Bug Screen
Existing
Left (E) 37.3
0.710
0.73 2.0
none Bug Screen
Existing
Rear (S) 30.0
0.710
0.73 2.0
none Bug Screen
Existing
Right (W) 32.0
0.710
0.73 2.0
none Bug Screen
Existing
Right (W) 16.0
0.710
0.73 10.0
none Bug Screen
Existing
Left (E) 45.7
0.290
0.23 6.0
none Bug Screen
New
Rear (S) 24.0
0.290
0.23 2.0
none Bug Screen
New
HVAC SYSTEMS
Qty. Heating Min. Eff
Cooling Min. Eff
Thermostat
Status
1 Central Furnace 78% AFUE
Split Air Conditioner 8.9 SEER
Setback
Existing
HVAC DISTRIBUTION
Duct
Location Heating
Cooling Duct Location
R-Value
Status
A -AC_ Ducted
Ducted Attic
4.2
Existing
WATER HEATING
Gallons Min. Eff Distribution
Status
Ener Pro 7.1 by EnenqySoft User Number: 20648 la; 19 - GLS - 0931095 Pace 12 of 16
1.0111 2016 Low -Rise Residential Mandatory Measures Summary
NOTE: Low-rise residential buildings subject to the Energy Standards must comply with all applicable mandatory measures, regardless of the compliance approach
used. Review the respective section for more information. *Exceptions may apply.
Can Inal ub/niu
Building Envelope Measures:
§ 110.6(a)1
Air Leakage. Manufactured fenestration, exterior doors, and exterior pet doors must limit air leakage to 0.3 cfm/ftz or less when tested per
NFRC-400 or ASTM E283 or AAMANVDMA/CSA 101/I.S.2/A440-2011.'
§ 110.6(a)5:
Labeling. Fenestration products must have a label meeting the requirements of § 10-111(a).
§ 110.6(b):
Field fabricated exterior doors and fenestration products must use U-factors and solar heat gain coefficient (SHGC) values from TABLES
110.6-A and 110.6-13 for compliance and must be caulked and/or weatherstri ed.'
§ 110.7:
Air Leakage. All joints, penetrations, and other openings in the building envelope that are potential sources of air leakage must be caulked,
asketed, or weather stripped.
§ 110.8(a):
Insulation Certification by Manufacturers. Insulation specified or installed must meet Standards for Insulating Material.
§ 110.8(g):
Insulation Requirements for Heated Slab Floors. Heated slab floors must be insulated per the requirements of § 110.8(g).
§ 110.8(i):
Roofing Products Solar Reflectance and Thermal Emittance. The thermal emittance and aged solar reflectance values of the roofing
material must meet the requirements of § 110.8 i when the installation of a cool roof is specified on the CF1 R.
§ 110.80):
Radiant Barrier. A radiant barrier must have an emittance of 0.05 or less and be certified to the Department of Consumer Affairs.
Ceiling and Rafter Roof Insulation. Minimum R-22 insulation in wood -frame ceiling; or the weighted average U-factor must not exceed 0.043.
Minimum R-19 or weighted average U-factor of 0.054 or less in a rafter roof alteration. Attic access doors must have permanently attached
§ 150.0(a):
insulation using adhesive or mechanical fasteners. The attic access must be gasketed to prevent air leakage. Insulation must be installed in
direct contact with a continuous roof or ceiling which is sealed to limit infiltration and exfiltration as specified in § 110.7, including but not limited
to placing insulation either above or below the roof deck or on top of a drywall ceiling.'
§ 150.0(b):
Loose -fill Insulation. Loose fill insulation must meet the manufacturer's required density for the labeled R-value.
Wall Insulation. Minimum R-13 insulation in 2x4 inch wood framing wall or have a U-factor of 0.102 or less (R-19 in 2x6 or U-factor of 0.074 or
§ 150.0(c):
less). Opaque non -framed assemblies must have an overall assembly U-factor not exceeding 0.102, equivalent to an installed value of R-13 in a
wood framed assembl .'
§ 150.0(d):
_
Raised -floor Insulation. Minimum R-19 insulation in raised wood framed floor or 0.037 maximum U-factor.`
§ 150.0(f):
Slab Edge Insulation. Slab edge insulation must meet all of the following: have a water absorption rate, for the insulation material alone without
facings, no greater than 0.3%; have a water vapor permeance no greater than 2.0 perm/inch; be protected from physical damage and UV light
deterioration; and, when installed as part of a heated slab floor, meet the requirements of § 110.8(g).
§ 150.0(g)1:
Vapor Retarder. In Climate Zones 1-16, the earth floor of unvented crawl space must be covered with a Class I or Class II vapor retarder. This
requirement also applies to controlled ventilation crawls ace for buildings complying with the exception to § 150.0(d).
§ 150.0(g)2:
Vapor Retarder. In Climate Zones 14 and 16, a Class I or Class II vapor retarder must be installed on the conditioned space side of all
insulation in all exterior walls, vented attics, and unvented attics with air -permeable insulation.
150.0
§ (q)'
Fenestration Products. Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors must have a
maximum U-factor of 0.58; or the weighted average U-factor of all fenestration must not exceed 0.58.'
Fireplaces, Decorative Gas Appliances, and Gas Log Measures:
§ 150.0(e)1A:
Closable Doors. Masonry or factory -built fireplaces must have a closable metal or glass door covering the entire opening of the firebox.
§ 150.0(e)1 B:
Combustion Intake. Masonry or factory -built fireplaces must have a combustion outside air intake, which is at least six square inches in area
and is equipped with a readily accessible, operable, and tight -fitting damper or combustion -air control device.`
§ 150.0(e)1 C:
Flue Damper. Masonry or factory -built fireplaces must have a flue damper with a readily accessible control.'
§ 150.0(e)2:
Pilot Light. Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside of
the building, are prohibited.
Space Conditioning, Water Heating, and Plumbing System Measures:
§ 110.0-§ 110.3:
Certification. Heating, ventilation and air conditioning (HVAC) equipment, water heaters, showerheads, faucets, and all other regulated
appliances must be certified by the manufacturer to the Energy Commission.'
§ 110.2(a):
HVAC Efficiency. Equipment must meet the applicable efficiency requirements in TABLE 110.2-A through TABLE 110.2-K.'
Controls for Heat Pumps with Supplementary Electric Resistance Heaters. Heat pumps with supplementary electric resistance heaters
§ 110.2(b):
must have controls that prevent supplementary heater operation when the heating load can be met by the heat pump alone; and in which the
cut -on temperature for compression heating is higher than the cut -on temperature for supplementary heating, and the cut-off temperature for
comp ression heating is higher than the cut-off temperature for supplementary heating.'
§ 110.2(c):
Thermostats. All unitary heating or cooling systems not controlled by a central energy management control system (EMCS) must have a
setback thermostat.'
Water Heating Recirculation Loops Serving Multiple Dwelling Units. Water heating recirculation loops serving multiple dwelling units must
§ 110.3(c)5:
meet the air release valve, backflow prevention, pump priming, pump isolation valve, and recirculation loop connection requirements of §
110.3(c)5.
§ 110.3(c)7:
Isolation Valves. Instantaneous water heaters with an input rating greater than 6.8 kBTU/hr (2 kW) must have isolation valves with hose bibbs
or other fittings on both cold water and hot water lines of water heating systems to allow for water tank flushing when the valves are closed.
§ 110.5:
Pilot Lights. Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces; household cooking appliances (appli-
ances without an electrical super voltage connection with pilot lights that consume less than 150 Btu/hr are exempt); and pool and spa heaters.'
Building Cooling and Heating Loads. Heating and/or cooling loads are calculated in accordance with ASHRAE Handbook, Equipment
§ 150.0(h)1:
Volume, Applications Volume, and Fundamentals Volume; SMACNA Residential Comfort System Installation Standards Manual; or ACCA
Manual J using design conditions specified in § 150.0(h)2.
2016 Low -Rise Residential Mandatory Measures Summary
§ 150.0(h)3A:
Clearances. Installed air conditioner and heat pump outdoor condensing units must have a clearance of at least 5 feet from the outlet of any
dryer vent. _
§ 150.0(h)3B:
Liquid Line Drier. Installed air conditioner and heat pump systems must be equipped with liquid line filter driers if required, as specified by
manufacturer's instructions.
§ 150.00)1:
Storage Tank Insulation. Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water -heating systems, must have
R-12 external insulation or R-16 internal insulation where the internal insulation R-value is indicated on the exterior of the tank.
Water piping and cooling system line insulation. For domestic hot water system piping, whether buried or unburied, all of the following must
be insulated according to the requirements of TABLE 120.3-A: the first 5 feet of hot and cold water pipes from the storage tank; all piping with a
§ 150.00)2A:
nominal diameter of 314 inch or larger; all piping associated with a domestic hot water recirculation system regardless of the pipe diameter;
piping from the heating source to storage tank or between tanks; piping buried below grade; and all hot water pipes from the heating source to
kitchen fixtures.'
§ 150.00)2B:
Water piping and cooling system line insulation. All domestic hot water pipes that are buried below grade must be installed in a water proof
and non -crushable casing or sleeve:
§ 150.00)2C:
Water piping and cooling system line insulation. Pipe for cooling system lines must be insulated as specified in § 150.00)2A. Distribution
piping for steam and h dronic heating systems or hot waters stems must meet the requirements in TABLE 120.3-A.'
§ 150.00)3:
Insulation Protection. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
Insulation Protection. Insulation exposed to weather must be installed with a cover suitable for outdoor service. For example, protected by
§ 150.00)3A:
aluminum, sheet metal, painted canvas, or plastic cover. The cover must be water retardant and provide shielding from solar radiation that can
cause degradation of the material.
§ 150.00)3B:
Insulation Protection. Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space must have a
Class I or Class II vapor retarder.
Gas or Propane Systems. Systems using gas or propane water heaters to serve individual dwelling units must include all of the following: a
§ 150.0(n)1:
120V electrical receptacle within 3 feet of the water heater; a Category III or IV vent, or a Type B vent with straight pipe between the outside
termination and the space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the
water heater, and allows natural draining without pump assistance; and a gas supply line with a capacity of at least 200,000 Btu/hr.
§ 150.0(n)2:
Recirculating Loops. Recirculating loops serving multiple dwelling units must meet the requirements of § 110.3(c)5.
§ 150.0(n)3:
Solar Water -heating Systems. Solar water -heating systems and collectors must be certified and rated by the Solar Rating and Certification
Corporation (SRCC) or by a listing agency that is approved by the Executive Director.
Ducts and Fans Measures:
§ 110.8(d)3:
Ducts. Insulation installed on an existing space -conditioning duct must comply with § 604.0 of the California Mechanical Code (CMC). If a
contractor installs the insulation, the contractor must certify to the customer, in writing, that the insulation meets this requirement.
CMC Compliance. All air -distribution system ducts and plenums must be installed, sealed, and insulated to meet the requirements of CMC
§§ 601.0, 602.0, 603.0, 604.0, 605.0 and ANSIISMACNA-006-2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition. Portions
of supply -air and return -air ducts and plenums must be insulated to a minimum installed level of R-6.0 (or higher if required by CMC § 605.0) or
a minimum installed level of R-4.2 when entirely in conditioned space as confirmed through field verification and diagnostic testing
§ 150.0(m)1:
(RA3.1.4.3.8). Connections of metal ducts and inner core of flexible ducts must be mechanically fastened. Openings must be sealed with
mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181B or aerosol sealant that
meets the requirements of UL 723. If mastic or tape is used to seal openings greater than inch, the combination of mastic and either mesh or
tape must be used. Building cavities, support platforms for air handlers, and plenums designed or constructed with materials other than sealed
sheet metal, duct board or flexible duct must not be used for conveying conditioned air. Building cavities and support platforms may contain
ducts. Ducts installed in cavities and support platforms must not be compressed to cause reductions in the cross -sectional area of the ducts.'
Factory -Fabricated Duct Systems. Factory -fabricated duct systems must comply with applicable requirements for duct construction,
§ 150.0(m)2:
connections, and closures; joints and seams of duct systems and their components must not be sealed with cloth back rubber adhesive duct
tapes unless such tape is used in combination with mastic and draw bands.
§ 150.0(m)3:
Field -Fabricated Duct Systems. Field -fabricated duct systems must comply with applicable requirements for: pressure -sensitive tapes,
mastics, sealants, and other requirements specified for duct construction.
§ 150.0(m)7:
Backdraft Dampers. All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or
automatic dampers.
§ 150.0(m)8:
Gravity Ventilation Dampers. Gravity ventilating systems serving conditioned space must have either automatic or readily accessible,
manually operated dampers in all openings to the outside, except combustion inlet and outlet air openings and elevator shaft vents.
Protection of Insulation. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, and
§ 150.0(m)9:
wind. Insulation exposed to weather must be suitable for outdoor service. For example, protected by aluminum, sheet metal, painted canvas, or
plastic cover. Cellular foam insulation must be protected as above or painted with a coating that is water retardant and provides shielding from
solar radiation.
§ 150.0(m)10:
_
Porous Inner Core Flex Duct. Porous inner core flex duct must have a non -porous layer between the inner core and outer vapor barrier.
Duct System Sealing and Leakage Test. When space conditioning systems use forced air duct systems to supply conditioned air to an
§ 150.0(m)11.
occupiable space, the ducts must be sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in
accordance with § 150.0 m 11 and Reference Residential Appendix RA3.
Air Filtration. Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal
§ 150.0(m)12:
conditioning component, except evaporative coolers, must be provided with air filter devices that meet the design, installation, efficiency,
pressure drop, and labeling requirements of § 150.0(m)12.
Ot, 1
2016 Low -Rise Residential Mandatory Measures Summary
rDuct
System Sizing and Air Filter Grille Sizing. Space conditioning systems that use forced air ducts to supply cooling to an occupiable
space must have a hole for the placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPP) in the
§ 150.0(m)13:
supply plenum. The space conditioning system must also demonstrate airflow, 2 350 CFM per ton of nominal cooling capacity through the return
grilles, and an air -handling unit fan efficacy 5 0.58 WICFM as confirmed by field verification and diagnostic testing, in accordance with
Reference Residential Appendix RA3.3. This applies to both single zone central forced air systems and every zone for zonally controlled central
forced air systems.'
Ventilation for Indoor Air Quality. All dwelling units must meet the requirements of ASHRAE Standard 62.2. Neither window operation nor
§150.0(o):
continuous operation of central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of
providing whole -building ventilation.
§ 150.0(o)1A:
Field Verification and Diagnostic Testing. Whole -building ventilation airflow must be confirmed through field verification and diagnostic
testing, in accordance with Reference Residential Appendix RA3.7.
Pool and Spa Systems and Equipment Measures:
Certification by Manufacturers. Any pool or spa heating system or equipment must be certified to have all of the following: a thermal efficiency
§ 110.4(a):
that complies with the Appliance Efficiency Regulations; an on -off switch mounted outside of the heater that allows shutting off the heater
without adjusting the thermostat setting; a permanent weatherproof plate or card with operating instructions; and must not use electric
resistance heatin .'
§ 110.4(b)1:
Piping. Any pool or spa heating equipment must be installed with at least 36 inches of pipe between the filter and the heater, or dedicated
suction and return lines, or built-in or built-up connections to allow for future solar heating.
§ 110.4(b)2:
Covers. Outdoor pools or spas that have a heat pump or gas heater must have a cover.
§ 110.4(b)3:
Directional inlets and time switches for pools. Pools must have directional inlets that adequately mix the pool water, and a time switch that
will allow all pumps to be set or programmed to run only during off-peak electric demand periods. _
§ 110.5.
Pilot Light. Natural gas pool and spa heaters must not have a continuously burning pilot light.
§ 150.0 (p):
Pool Systems and Equipment Installation. Residential pool systems or equipment must meet the specified requirements for pump sizing, flow
rate, piping, filters, and valves.'
Lighting Measures:
§ 110.9:
Lighting Controls and Components. All lighting control devices and systems, ballasts, and luminaires must meet the applicable requirements
of § 110.9.'
§ 110.9(e):
JA8 High Efficacy Light Sources. To qualify as a JA8 high efficacy light source for compliance with § 150.0(k), a residential light source must
be certified to the Energy Commission according to Reference Joint Appendix JA8.
§ 150.0(k)1A:
Luminaire Efficacy. All installed luminaires must be high efficacy in accordance with TABLE 150.0-A.
Blank Electrical Boxes. The number of electrical boxes that are more than 5 feet above the finished floor and do not contain a luminaire or
§ 150.0(k)1 B:
other device must be no greater than the number of bedrooms. These electrical boxes must be served by a dimmer, vacancy sensor control, or
fan speed control.
Recessed Downlight Luminaires in Ceilings. Luminaires recessed into ceilings must meet all of the requirements for: insulation contact (IC)
§ 150.0(k)1 C:
labeling; air leakage; sealing; maintenance; and socket and light source as described in § 150.0(k)1 C. A JA8-2016-E light source rated for
elevated temperature must be installed by final inspection in all recessed downli ht luminaires in ceilings.
§ 150.0(k)1 D:
Electronic Ballasts. Ballasts for fluorescent lamps rated 13 watts or greater must be electronic and must have an output frequency no less than
20 kHz.
Night Lights. Permanently installed night lights and night lights integral to installed luminaires or exhaust fans must be rated to consume no
§ 150.0(k)1 E:
more than 5 watts of power per luminaire or exhaust fan as determined in accordance with § 130.0(c). Night lights do not need to be controlled
by v cancy sensors.
§ 150.0(k)1 F:
Lighting Integral to Exhaust Fans. Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods)
must meet the applicable requirements of § 150.0 k .'
Screw based luminaires. Screw based luminaires must not be recessed downlight luminaires in ceilings and must contain lamps that comply
§ 150.0(k)1 G:
with Reference Joint Appendix JA8. Installed lamps must be marked with "JA8-2016" or "JA8-2016-E" as specified in Reference Joint Appendix
JA8.'
§ 150.0(k)1 H:
Enclosed Luminaires. Light sources installed in enclosed luminaires must be JAB compliant and must be marked with "JA8-2016-E."
§ 150.0(k)2A:
Interior Switches and Controls. All forward phase cut dimmers used with LED light sources must comply with NEMA SSL 7A.
§ 150.0(k)2B:
Interior Switches and Controls. Exhaust fans must be switched separately from lighting systems.'
§ 150.0(k)2C:
Interior Switches and Controls. Luminaires must be switched with readily accessible controls that permit the luminaires to be manually
switched ON and OFF.
§ 150.0(k)2D:
Interior Switches and Controls. Controls and equipment must be installed in accordance with manufacturer's instructions.
§ 150.0(k)2E:
Interior Switches and Controls. No control must bypass a dimmer or vacancy sensor function if the control is installed to comply with
150.0(k).
§ 150.0(k)2F:
Interior Switches and Controls. Lighting controls must comply with the applicable requirements of § 110.9.
Interior Switches and Controls. An energy management control system (EMCS) may be used to comply with dimmer requirements if it:
§ 150.0(k)2G:
functions as a dimmer according to § 110.9; meets the Installation Certificate requirements of § 130.4; meets the EMCS requirements of §
130.5(f); and meets all other requirements in § ]2.
Interior Switches and Controls. An EMCS may be used to comply with vacancy sensor requirements in § 150.0(k) if it meets all of the
§ 150.0(k)2H:
following: it functions as a vacancy sensor according to § 110.9; the Installation Certificate requirements of § 130.4; the EMCS requirements of §
130.5 ; and all other requirements in § 150.0(k)2.
§ 150.0(k)21:
Interior Switches and Controls. A multiscene programmable controller may be used to comply with dimmer requirements in § 150.0(k) if it
provides the functionality of a dimmer according to § 110.9, and complies with all other applicable requirements in § 150.0(k)2.