Polo Villas (formerly The Orchards) TR 34279 - Title 24BUILDING ENERGY -ANALYSIS REPORT
PROJECT:
Houses #-1--3—Cardinal Direction Calculations
The Orchards
La Quinta, CA
Project Designer:
Elemental Architecture
1555 S Palm Canyon Drive, Suite D202
Palm Springs, CA 92264
Report Prepared by:
Fernando A. Rodriguez
IVIRC Engineering, INC
34300 Gateway Drive, Suite 120
Palm Desert, CA 92211
760.340.9005
-ry 0
-C,
BtJ1LD/rVG LAE r1NV
SAF RECEIVED''.
OR CONs er:
DAZE C 7-10rV JUL 2 8 r� 2015
CITY OF LA QUINTA
COMMUNITY DEVELOPMENT
7/8/2015
The~EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2013 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC —www.energysoft.com.
EnergyPro 6.5 by EnergySoff-- User Number: 5235 ID:
I
TABLE OF CONTENTS
Cover Page 1
Table of Contents 2
Form CF-1 R:PRF-01-E Certificate of Compliance 3
Form RMS-1 Residential Measures Summary 18
Form MF-1 R Mandatory Measures Summary 20
�
r
i
EnergyPro 6.5 by EnergySoft Job Number: ID: User Number: 5235
e
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #1-3 Cardinal Direction Calculations Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis . Input File Name: HOUSES 1-3.xml
CFI R-PRF-01
Page 1 of 15
GENERAL INFORMATION
01
Project Name
Houses #1-3 Cardinal Direction Calculations
02
Calculation Description
Title 24 Analysis
03
Project Location
The Orchards
04
City
La Quinta
05
Standards Version
Compliance 2015
06
Zip Code
07
Compliance Manager Version
BEMCmpMgr 2013-3c (710)
08
Climate Zone
CZ15
09
Software Version
EnergyPro 6.5
10
Building Type
Single Family
11
Front Orientation (deg/Cardinal)
Cardinal
12
Project Scope
Newly Constructed
13
Number of Dwelling Units
1
14
Total Cond. Floor Area (ft)
3636.1
15
Number of Zones
3
16
Slab Area (ftZ)
3636.1
17
Number of Stories
1
18
Addition Cond. Floor Aiea
N/A
19
Natural Gas Available
Yes
20
Addition Slab Area (ftZ)
N/A
21
Glazing Percentage (%)
32.7%
This compliance analysis is valid only for permit applications through July 31, 2015
j1x
COMPLIANCE RESULTS
A%
01
s
Building Complies with Computer Performr^s�ances"
02
This buildingincor orates features that re wire field tesiin and/o� verification b a certified HERS rater under the"su ervision of a CEC-a roved HERS provider.
� P 4 9 Y PV PP
03
This building incorporates one or more Special Features shown below
Registration Number: 215-No186363A-000000000-0000 Registration Date/Time: 2015-07-08 11:54:08 HERS Provider: CalCERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF111-07082015-710 Report Generated at: 2015-07-0811:13:37
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #1-3 Cardinal Direction Calculations
Calculation Description: Title 24 Analysis
Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Input File Name: HOUSES 1-3.xml
CFI R-PRF-01
Page 2 of 15
ENERGY USE SUMMARY
Energy Use
Standard
Proposed
Compliance
Percent
(kTDV/ft2-yr)
Design
Design
Margin
Improvement
Space Heating
2.16
2.38
-0.22
-10.2%
Space Cooling
81.76
79.41
2.35
2.9%
IAQ Ventilation
1.09
1.09
0.00
0.0%
Water Heating
7.06
5.12
1.94
27.5%
PV Credit
----
0.00
0.00
----
North Facing Compliance Total
92.07
88.00
4.07
4.4%
Space Heating
2.16
3.56
-1.40
-64.8%
Space Cooling
81.76
80.15
1.61
2.0%
IAQ Ventilation
1.09
1.09
0.00
0.0%
t
Water Heating
_
7.06
5.12
1.94
27.5%
PV Credit
----
0.00
0.00
----
East Facing Compliance Total
92.07
89.92
2.15
2.3%
Space Heating
2.16
4.30
-2.14
-99.1%
Space Cooling
IAQ Ventilation
C
61.761 7533
09 10.00
L
6.43
7.9%
0.0%
Water Heating
PV Credit
7 06,
+by
#w5:12
f
� �
1.94
27.5%
µ
0.00
South Facing Compliance Total
92.07
85.84
6.23
6.8%
Space Heating
2.16
2.84
-0.68
-31.5%
Space Cooling
81.76
75.79
5.97
7.3%
IAQ Ventilation
1.09
1.09
0.00
0.0%
Water Heating
7.06
5.12
1.94
27.5%
PV Credit
----
0.00
0.00
----
West Facing Compliance Total
92.07
84.84
7.23
7.9%
Registration Number: 215-No186363A-000000000-0000 Registration Date/Time: . 2015-07-08 11:54:08 HERS Provider: CaiCERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-0811:13:37
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #1-3 Cardinal Direction Calculations Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSES 1-3.xml
REQUIRED SPECIAL FEATURES
The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis.
• Cool roof
• Ceiling has high level of insulation
• Window overhangs and/or fins
CFI R-PRF-01
Page 3 of 15
HERS FEATURE SUMMARY
The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is
provided in the building components tables below.
Building -level Verifications:
• High Quality Insulation Installation (QII)
• IAQ mechanical ventilation
Cooling System Verifications:
• Minimum Airflow 3
• Verified EER r
• Verified SEER
• Refrigerant Charge
• Fan Efficacy Watts/CFM v E
HVAC Distribution System Verifications ":;;'
• Duct Sealing
Domestic Hot Water System Verifications:
• None
.. .t
Yt4 f - 3:t 5t 1.1 4-i
11 It 1f It --.
13 3f 14 1.€
ENERGY DESIGN RATING hr
This is the sum of the annual TDV energy consumption for energy use components ihcluded in the Pper®r Man ce,com ance a P"roach for the, Standard Design Building (Energy Budget) and the annual
TDV energy consumption for lighting and components not regulated by Title 24, Part 6 (such as domestic appliances and consumer electronics) and accounting for the annual TDV energy offset by an
on -site renewable energy system.
Reference Energy Use
Energy Design Rating
Margin
Percent Improvement
Total Energy (kTDV/f2-yr)*
131.75
129.60
2.15
1.6%
* includes calculated Appliances and Miscellaneous Energy Use (AMEU)
BUILDING - FEATURES INFORMATION
01
02
03
04
05
06
07
Number of Dwelling
Number of Ventilation
Number of Water
Project Name
Conditioned Floor Area (ft2)
Units
Number of Bedrooms
Number of Zones
Cooling Systems
Heating Systems
Houses #1-3 Cardinal Direction
Calculations
3636.1
1
6
3
0
2
Registration Number: 215-No186363A-000000000-0000 Registration Date/Time: 2015-07-08 11:54:08 HERS Provider: CaiCERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-0811:13:37
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #1-3 Cardinal Direction Calculations Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSES 1-3.xml
CF1 R-PRF-01
Page 4 of 15
ZONE INFORMATION
01
02
03
04
05
06
07
Zone Name
Zone Type
'HVAC System Name
Zone Floor Area
(ft2)
Avg, Ceiling
Height
Water Heating System 1
Water Heating System 2
Living, Dining, Kitchen
Conditioned
FAU-5T Living, Dining, Kit.
1461.8
12.6038
DHW Sys 1
Bedroom Wing
Conditioned
FAU-3T Bedroom VVing2
1533.3
9
DHW Sys 3
Master Suite 1
Conditioned
FAU-2T Master Suite 13
641
9
DHW Sys 3
3
i`
i ..`
�H E 5 R
Registration Number: 215-No186363A-000000000-0000 Registration Date/Time: 2015-07-08 11:54:08 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-0811:13:37
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #1-3 Cardinal Direction Calculations Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis
Input File Name: HOUSES 1-3.xml
CF1 R-PRF-01
Page 5of15
OPAQUE SURFACES
01
02
03
04
05
06
07
08
Name
Zone
Construction
Azimuth
Orientation
Gross Area (ft2)
Window & Door Area (ft)
Tilt (deg)
S-Wall
Living, Dining, Kitchen
R-21 Wall
180
Left
60
55.22
90
N-Wall
Living, Dining, Kitchen
R-21 Wall
0
Right
60
55.22
90
W-Wall
Living, Dining, Kitchen
R-21 Wall
270
Back
620
403.968
90
E-Wall
Living, Dining, Kitchen
R-21 Wall
90 .
Front
558
142.177
90,
Roof
Living, Dining, Kitchen
R-60 Roof Attic
1317
Roof 2
Living, Dining, Kitchen
R-60 Roof Attic
144.8
S-Wall 2
Bedroom Wing
R-21 Wall
180
Left
249
8
90
W-Wall 2
Bedroom Wing
R-21 Wall
270
Back
160.5
28
90
N-Wall 2
Bedroom Wing
R-21 Wall
0
Right
235.5
96
90
S-Wall 3
Bedroom Wing
R-21 Wall
180
Left
130.5
22.7
90
E-Wall 2
�.*Bedroom Wing
R-21 Wall
90
Front
160.5
90
N-Wall 3
Bedroom Wing
R-21 Wall
0
Right
130.5
90
S Wall 4
Bedroom Wing ra- a
� �
R=21 EVVallts-180
_Left
N, 192
22.7
90
E-Wall 3
Bedroom,Wng
j�' R-21 1Nall` )�zt�
"90j
� ,From (�
25.5
17.5
90
S-Wall 5
BedroomaWng '
* xi `F2 21 VVall3, a t:
} " 180
I Lefty ' "
' 153
22.7
90
S-Wall 6
Bedroom VUng
R 21 Wall `
180',
Leftx
160.5
22.7
90
N-Wall 4
Bedroom Wing
R-21 Wall
0
Right
283.5
180
90
Roof 3
Bedroom Wing
R-60 Roof Attic
447
Roof 4
Bedroom Wing
R-60 Roof Attic
222
Roof 5
Bedroom Wing
R-60 Roof Attic
280
Roof 6
Bedroom VVng
R-60 Roof Attic
273.3
Roof 7
Bedroom Wing
. R-60 Roof Attic
191
Roof 8
Bedroom Wing
R-60 Roof Attic
120
S-Wall 7
Master Suite 1
R721 Wall
180
Left
270
28
90
W-Wall 3
Master Suite 1
R-21 Wall
270
Back
144
72
90
N-Wall 5
Master Suite 1
R-21 Wall
0
Right
300
12
90
N-Wall 6
Master Suite 1
R-21 Wall
0
Right
11.3
90
Roof 9
Master Suite 1
R-60 Roof Attic
641
Registration Number: 215-No186363A-000000000-0000 Registration Date/Time: 2015-07-08 11:54:08 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-08 11:13:37
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #1-3 Cardinal Direction Calculations Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSES 1-3.xml
CF1 R-PRF-01
Page 6of15
ATTIC
01
02
03
04
05
06
07
08
Name
Construction
Type
Roof Rise
Roof Reflectance
Roof Emittance
Radiant Barrier
Cool Roof
Attic Living, Dining, Kitchen
Attic RoofLiving, Dining,
Kitchen
Unventilated
0
0.77
0.87
Yes
Yes
Attic Bedroom Wing
Attic RoofBedroom Wing
Unventilated
0
0.77
0.87
Yes
Yes
Attic Master Suite 1
Attic RoofMaster Suite 1
Unventilated
0
0.77
0.87
Yes
Yes
� V
1 {
Registration Number: 215-No186363A-000000000-0000 Registration Date/Time: 2015-07-08 11:54:08 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF113-07082015-710 Report Generated at: 2015-07-08 11:13:37
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD,:.
Project Name: Houses #1-3 Cardinal Direction Calculations Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis
Input File Name: HOUSES 1-3.xml
CF1 R-PRF-01
Page 7of1.5
WINDOWS
01
02
03
04
05
06
07
08
09
10
Name
Type
Surface (Orientation -Azimuth)
Width (ft)
Height (ft)
Multipli
er
Area
(ft)
U-factor
SHGC
Exterior Shading
E
Window
S-Wall (Left-180)
5.5
2.5
1.004
13.8
0.38
0.25
Insect Screen (default)
E 2
Window
S-Wall (Left-180)
5.5
2.5
1.004
13.8
0.38
1 0.25
Insect Screen (default)
E 3
Window
S-Wall (Left-180)
5.5
2.5
1.004
13.8
0.38
0.25
Insect Screen (default)
E 4
Window
S-Wall (Left-180)
5.5
2.5
1.004
13.8
0.38
0.25
Insect Screen (default)
E 5
Window
N-Wall (Right-0)
5.5
2.5
1.004
13.8
0.38
0.25
Insect Screen (default)
E 6
Window
N-Wall (Right-0)
5.5
2.5
1.004
13.8
0.38
0.25
Insect Screen (default)
E 7
Window
N-Wall (Right-0)
5.5
2.5
1.004
13.8
0.38
0.25
Insect Screen (default)
E 8
Window
N-Wall (Right-0)
5.5
2.5
1.004
13.8
0.38
0.25
Insect Screen (default)
A
Window
W-Wall (Back-270)
4.0
2.5
1
10.0
0.38
0.25
Insect Screen (default)
A 2
Window
W-Wall (Back-270)
4.0
2.5
1
10.0
0.38
0.25
Insect Screen (default)
F
Window
W-Wall (Back-270)
6.0
4.0
1
24.0
0.38
0.25
Insect Screen (default)
F 2
Window
W Wall-(Back-270)�-. I> <
.R.y 6:0
4.0
1
24.0
0.38
0.25
Insect Screen (default)
G
Window
W-1Nall (Back-270)I. +` G
'" 9.3 +'
4.0
;0:991 4
;a -37.0
0.38
0.25
Insect Screen (default)
G 2
Window
W--Wall (Back 270)I, }
9,3'/'
4:00.991
t..37:0
0.38
0.25
Insect Screen (default)
K
Window
W-Wall (Back!270) <
4:0
7:0 F
IZ
28.0
0.38
0.25
Insect Screen (default)
L
Window
W-Wall (Back-270)
6.6
7.0
1
42.0
0.38
0.25
Insect Screen (default)
06
Window
W-Wall (Back-270)
9.0
8.0
1
72.0
0.55
0.20
Insect Screen (default)
07
Window
W-Wall (Back-270)
9.0
8.0
1
72.0
0.55
0.20
Insect Screen (default)
08
Window
W-Wall (Back-270)
6.0
8.0
1
48.0
0.42
0.23
Insect Screen (default)
A 3
Window
E-Wall (Front-90)
4.0
2.5
1
10.0
0.38
0.25
Insect Screen (default)
B
Window
E-Wall (Front-90)
2.7
2.5
1.378
9.2
0.38
0.25
Insect Screen (default)
C
Window
E-Wall (Front-90)
6.0
2.5
0.993
14.9
0.38
0.25
Insect Screen (default)
C 2
Window
E-Wall (Front-90)
6.0
2.5
0.993
14.9
0.38
0.25
Insect Screen (default)
C 3
Window
E-Wall (Front-90)
6.0
2.5
0.993
14.9
0.38
0.25
Insect Screen (default)
C 4
Window
E-WWall (Front-90)
6.0
2.5
0.993
14.9
0.38
0.25
Insect Screen (default)
C 5
Window
E-Wall (Front-90)
6.0
2.5
0.993
14.9
0.38
0.25
Insect Screen (default)
D
Window
E-Wall (Front-90)
4.8
2.5
0.994
11.8
0.38
0.25
Insect Screen (default)
01
Window
E-Wall (Front-90)
3.7
10.0
1
36.7 1
0.74
0.19
Insect Screen (default)
J
Window
S-Wall 2 (Left-180)
----
1
8.0 1
0.38
0.25
Insect Screen (default)
Registration Number: 215-N0186363A-000000000-0000 Registration Date/Time: 2015-07-08 11:54:08 HERS Provider: CaICERTS ink.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 • Report Generated at: 2015-07-08 11:13:37
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #1-3 Cardinal Direction Calculations Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSES 1-3.xml
CFI R-PRF-01
Page 8 of 15
K 2
Window
W-Wall 2 (Back-270)
--
-
1
28.0
0.38
0.25
Insect Screen (default)
03
Window
N-Wall 2 (Right-0)
-
1
96.0
0.55
0.20
Insect Screen (default)
I
Window
S-Wall 3 (Left-180)
----
----
1
22.7
0.56
0.24
Insect Screen (default)
12
Window
S-Wall 4 (Left-180)
----
----
1
22.7
0.56
0.24
Insect Screen (default)
H
Window
E-Wall 3 (Front-90)
----
----
1
17.5
0.48
0.25
1 Insect Screen (default)
13
Window
S-Wall 5 (Left-180)
----
----
1
22.7
0.56
0.24
Insect Screen (default)
14
Window
S-Wall 6 (Left-180)
----
----
1
22.7
0.56
0.24
Insect Screen (default)
L 2
Window
N-Wall 4 (Right-0)
----
----
1
42.0
0.38
0.25
Insect Screen (default)
L 3
Window
N-Wall 4 (Right-0)
----
----
1
42.0
0.38
0.25
Insect Screen (default)
04
Window
N-Wall 4 (Right-0)
----
----
1
48.0
0.42
0.23
Insect Screen (default)
05
Window
N-Wall 4 (Right-0)
----
----
1
48.0
0.42
0.23
Insect Screen (default)
K 3
Window
S-Wall 7 (Left-180)
----
----
1
28.0
0.38
0.25
Insect Screen (default)
09
Window
j ; _ W-Wall 3 (Back-270)
1
72.0
0.55
0.20
Insect Screen (default)
M
Window
N-Wall 5 (Right-0)
-
1
12.0
0.38
0.25 1
Insect Screen (default)
.� n
E
Registration Number: 215-NO186363A-000000000-0000 Registration Date/Time: 2015-07-08 11:54:08 HERS Provider: CaiCERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CFIR-07082015-710 Report Generated at: 2015-07-0811:13:37
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #1-3 Cardinal Direction Calculations
Calculation Description: Title 24 Analysis
Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Input File Name: HOUSES 1-3.xml
CF1 R-PRF-01
Page 9of15
OVERHANGS AND FINS
01
02
03
04
05
06
07
08
09
10
11
12
13
14
Overhang
Left Fin
Right Fin
Window
Depth
Dist Up
Left
Extent
Right
Extent
Flap Ht.
Depth
Top Up
DistL
Bot Up
Depth
Top Up
Dist R
Bot Up
E
3
0.1
3
3
0
0
0
0
0
.0
0
0
0
E2
3
0.1
3
3
0
1 0
0
0
0
0
0
0
0
E3
3
0.1
3
3
0
0
0
0
0
0
0
0
0
E4
3
0.1
3
3
0
0
0
0
0
0
0
0
0
E5
3
0.1
3
3
0
0
0
0
0
0
0
0
0
E6
3
0.1
3
3
0
0
0
0
0
0
0
0
0
E7
3 i,
0.1
3
3
0
0
0
0
0
0
0
0
0
E 8
3
0.1
3
3
0
0
0
0
0
0
0
0
0
A
3','
0.1
3
3
0
0
0
0
0
0
0
0
0
A 2
3.:"
"0:1'-
3
.,
... . 3
0
0
0
0
0
0
0
0
0
F
3
y 0.1' ,•
,. 3
3y. ,.
0
,,,�__-o
0
0
0
0
0
0
0
F 2
3 :.�
0.1
3
J 3
a OP.
0
G
G 2
i r3-
3
&� .0.1
., 3
3
fi �3
3
�
0
4 0"
4-0 ~t, a
o 0:11 11
Or"
11 0
Ord
0
0
0
0
0.
0
0
0
0
0
K
3
5`
43 .,3
""-
0
"°"0
0"
"� 0..
0
0
0
0
0
L
3
5
3
3
0
0
0
0
0
0
0
0
0
06.
3
5
3
3
0
0
0
0
0
0
0
0
0
07
3
5
3
3
0.
0
0
0
0
0
0
0
0
08
3
5
3
3
0
0
0
0
0
0
0
0
0
A
3
0.1
3
3
0
0
0
0
0
0
0
0
0
B
3
0.1
3
3
0
0
0
0
0
0
0
0
0
C
3
0.1
3
3
0
0
0
0
0
0
0
0
0
C2
3
0.1
3
3
0
0
0
0
0
0
0
0
0
C3
3
0.1
3
3
0
0
0
0
0
0
0
0
0
C4
3
0.1
3
3;
0
0
0
0
0
0
0
0
0
C5
3
0.1
3
3
0
0
0
0
0
0
0
0
0
D
3
0.1
3
3
0
0
0
0
0
0
0
0
0
01
3
3
3
3
0
0
0
0
0
0
0
0
0
Registration Number: 215-N0186363A-000000000-0000
CA Building Energy Efficiency Standards - 2013 Residential Compliance
Registration Date/Time: 2015-07-08 11:54:08
Report Version - CF1R-07082015-710
HERS Provider: CaICERTS inc.
Report Generated at: 2015-07-08 11:13:37
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #1-3 Cardinal Direction Calculations Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSES 1-3.xml
CF1 R-PRF-01
Page 10 of 15
OPAQUE SURFACE CONSTRUCTIONS
01
02
03
04
05
06
07
Total Cavity
Winter Design
Construction Name
Surface Type
Construction Type
Framing
R-value
U-value
Assembly Layers
• Cavity/Frame: no insul. /2x4 Top Chrd
Attic RoofLiving, Dining,
2x4 Top Chord of Roof Truss @ 24
Roof Deck: Wood Siding/sheathing/decking
Kitchen
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.644
Roofing: Light Roof (Asphalt Shingle)
• Inside Finish: Gypsum Board
Ceilings (below
Cavity/Frame: R-9.1 /2x4
R-60 Roof Attic
attic)
Wood Framed Ceiling
2x4 @ 24 in. O.C.
R 60
0.016
Over Floor Joists: R-50.9 insul.
• Inside Finish: Gypsum Board
• Cavity/Frame: R-21 /2x6
• Exterior Finish: Wood
R-21 Wall
Exterior Walls
Wood Framed Wall
2x6 @ 16 in. O.C.
R 21
0.066
Siding/sheathing/decking
• Cavity / Frame: no insul. / 2x4 Top Chrd
2x4 Top Chord of Roof Truss @ 24
Roof Deck: Wood Siding/sheathing/decking
Attic RoofBedroom Wing
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.644
Roofing. Light Roof (Asphalt Shingle)
Cavity /Frame: no insul. / 2x4 Top Chrd
2x4 Top Chord of Roof Truss @ 24
Roof Deck: Wood Siding/sheathing/decking
Attic RoofMaster Suite 1
Attic Roofs
Wood Framed'Ceiling
tineO.C~!
none;
0.644
Roofing: Light Roof (Asphalt Shingle)
j. i - i 3 r G { w-K i L-001 . U t 1 2 /-sl dr�e--r
SLAB FLOORS 1
�;*L k.l t�-•�1 #.� f"i
01
16241 Lj r
r> C 03 17:3 I>
r-% V1 Mf g--
Its r) 06
06
07
Name
Zone' •
Area (ft2
Perimeter (ft)
Edge Insul. R-value & Depth
Carpeted Fraction
Heated
Slab -on -Grade
Living, Dining, Kitchen
1317
0.1
None
0.8
No
Slab -on -Grade 2
Living, Dining, Kitchen
144.8
0.1
None
0.8
No
Slab -on -Grade 3
Bedroom Wing
447
0.1
None
0.8
No
Slab -on -Grade 4
Bedroom Wing
222
0.1
None
0.8
No
Slab -on -Grade 5
Bedroom Wing
280
0.1
None
0.8
No
Slab -on -Grade 6
Bedroom Wing
273.3
0.1
None
0.8
No
Slab -on -Grade 7
Bedroom Wing
191
0.1
None
0.8
No
Slab -on -Grade 8
Bedroom Wing
120
0.1
None
0.8
No
Slab -on -Grade 9
Master Suite 1
641
0.1
None
0.8
No
Registration Number: 215-No186363A-000000000-0000 Registration Date/Time: 2015-07-08 11:54:08 HERS Provider: CaiCERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-0811:13:37
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #1-3 Cardinal Direction Calculations Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSES 1-3.xml.
CFI R-PRF-01
Page 11 of 15
BUILDING ENVELOPE - HERS VERIFICATION
01
02
03
04
Quality Insulation Installation (QII)
Quality Installation of Spray Foam Insulation
Building Envelope Air Leakage
ACH @ 50 Pa
Required
Not Required
Not Required
---
WATER HEATING SYSTEMS
01
02
03
04
05
06
Name
System Type
Distribution Type
Water Heater
Number of Heaters
Solar Fraction (%)
DHW Sys 1 - 1/1
DHW
Pipe Insulation, All Lines
DHW Heater 1
1
.0%
DHW Sys 3 - 1/1
DHW
Pipe Insulation, All Lines
DHW Heater 3
1
.0%
WATER HEATERS
01
02 4
03
04
05
06
07
08
Name
Heater Element Type
Tank Type
Tank Volume
(gal)
Energy Factor or
Efficiency
Input Rating
Tank Exterior
Insulation
R-value
Standby Loss
(Fraction)
DHW Heater 1
Natural Gas"'
Indirect 0=40;5
.�
1 arm 0.83 in
180000-Btu/hr
12
0
DHW Heater 3
Natural Gas
Indirect
'0:5 ` 11
'ti, } 0.82 11 1(--N
f1�199000-Btu/hr
12
0
e" .r i_U L-=O to u 'a' -u tt 11 U
WATER HEATING - HERS VERIFICATION `"`F1 ` V lm rk
01
02
03
04
05
06
07
Name
Pipe Insulation
Parallel Piping
Compact Distribution
Point -of Use
Recirculation
Control
Central DHW
Distribution
DHW Sys 1 - 1/1
---
---
---
---
DHW Sys 3 - 1/1
-
-
Registration Number: 215-No186363A-000000000-0000 Registration Date/Time: 2015-07-68 11:54:08 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CFSR-07082015-710 Report Generated at: 2015-07-08 11:13:37
e
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #1-3 Cardinal Direction Calculations Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSES 1-3.xml
CF1 R-PRF-01
Page 12 of 15
SPACE CONDITIONING SYSTEMS
01
02
03
04
05
06
SC Sys Name
System Type
Heating Unit Name
Cooling Unit Name
Fan Name
Distribution Name
FAU-5T Living, Dining, Kit
Other Heating and Cooling
System
Heating Component 1
Cooling Component 1
HVAC Fan 1
Air Distribution System 1
FAU-3T Bedroom Wing2
Other Heating and Cooling
System
Heating Component 2
Cooling Component 2
HVAC Fan 2
Air Distribution System 2
FAU-2T Master Suite 13
Other Heating and Cooling
System
Heating Component 3
Cooling Component 3
HVAC Fan 3
Air Distribution System 3
HVAC - HEATING UNIT TYPES
01 4.
02
03
Name '
Type
Efficiency
Heating Component 1
CntrlFurnace - Fuel -fired central furnace
97.3 AFUE
Heating Component 2
CntrlFurnace - Fuel -fired central furnace
97.4 AFUE
Heating Component 3
CntrlFurnace - Fuel -fired central furnace
97.4 AFUE
HVAC - COOLING UNIT TYPES �� 'k
i I: .. i.i
01
- 02 1'4
. , -' 09 L .:04 k- f it
s U5
06
07
`+"
( Efficiency -t_j V
Multi -speed
Name
System Type
EER SEER
Zonally Controlled
Compressor
HERS Verification
Cooling Component 1
SplitAirCond
13
16
Not Zonal
Multi -speed
Cooling Component
1-hers-cool
Cooling Component 2
SplitAirCond
14
19
Not Zonal
Multi -speed
Cooling Component
1-hers-cool
Cooling Component 3
SplitAirCond
14
19
Not Zonal
Multi -speed
Cooling Component
1-hers-cool
HVAC COOLING - HERS VERIFICATION
01
02
03
04
05
06
Name
Verified Airflow
Airflow Target
Verified EER
Verified SEER
Verified Refrigerant
Charge
Cooling Component 1-hers-cool
Required
350
Required
Required
Required
Cooling Component 2-hers-cool
Required
350
Required
Required
Required
Cooling Component 3-hers-cool
Required
350
Required
Required
Required
Registration Number: 215-No186363A-000000000-0000 Registration Date/Time: 2015-07-08 11:54:08 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-08 11:13:37
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #1-3 Cardinal Direction Calculations
Calculation Description: Title 24 Analysis
Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Input File Name: HOUSES 1-3.xml
CF1 R-PRF-01
Page 13 of 15
HVAC - DISTRIBUTION SYSTEMS
01
02
03
04
05
06
07
Name
Type
Duct. Leakage
Insulation R-value
Duct Location
Bypass Duct
HERS Verification
Air Distribution System
Air Distribution System 1
DuctsAttic
Sealed and tested
4.2
Attic
None
1-hers-dist
Air Distribution System 2
DuctsAttic
Sealed and tested
4.2
Attic
None
Air Distribution System
2-hers-dist
Air Distribution System 3
DuctsAttic
Sealed and tested
4.2 .
Attic
None
Air Distribution System
3-hers-dist
HVAC DISTRIBUTION - HERS VERIFICATION
01
02
03
04
05
06
07
08
Name
Duct Leakage
Verification
Duct Leakage
Target (%)
Verified Duct
Location
Verified Duct
Design
Buried
Ducts
Deeply Buried
Ducts
Low -leakage
Air Handler
Air Distribution System 1-hers-dist
,'Required
6.0
Not Required
Not Required
Not Required
Not Required
---
Air Distribution System 2-hers-dist
Required w
6.0
Not Required
Not Required
Not Required
Not Required
---
Air Distribution System 3-hers dist
Required; 1
6.0
-Not Required.
Not Required
Not Required
Not Required
---
f10 31 Jd &k...-. If 1` dL 3i 3.1 3—_! �'r :'y
HVAC-FAN SYSTEMS '+. � II _J1 on �1 �t
01
Ig M w02 0. - C—%
* % � 03
04
Name
Type ' ""` " itV
'Fan' Power (Watts)CFM)
HERS Verification
HVAC Fan 1
Single Speed PSC Furnace Fan
0.58
HVAC Fan 1-hers-fan
HVAC Fan 2
Single Speed PSC Furnace Fan
0.58
HVAC Fan 2-hers-fan
HVAC Fan 3
Single Speed PSC Furnace Fan
0.58
HVAC Fan 3-hers-fan
HVAC FAN SYSTEMS - HERS VERIFICATION
01
02
03
Name
Verified Fan Waft Draw
Required Fan Efficiency (Watts/CFM)
HVAC Fan 1-hers-fan
Required
0.58
HVAC Fan 2-hers-fan
Required
0.58
HVAC Fan 3-hers-fan
Required
0.58
Registration Number: 215-No186363A-000000000-0000 Registration Date/Time: 2015-07-08 11:54:08 HERS Provider: CaiCERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-0811:13:37
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #1-3 Cardinal Direction Calculations Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSES 1-3.xml
CF1 R-PRF-01
Page 14 of 15
IAQ (Indoor Air Quality) FANS
01
02
03
04
05
06
Dwelling Unit
IAQ CFM
IAQ Watts/CFM
IAQ Fan Type
IAQ Recovery
Effectiveness(%)
HERS Verification
SFam IAQVentRpt
88.861
0.25
Default
0
Required
�[
qy
1.A�,
If
�I
�
z
r
•^�..
�- g
r
goy
R.J1r.'
Registration Number: 215-N0166363A-000000000-0000 Registration Date/Time: 2015-07-08 11:54:08 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-08 11:13:37
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #1-3 Cardinal Direction Calculations
Calculation Description: Title 24 Analysis
Calculation Date/Time: 11:08, Wed, Jul 08, 2015
Input File Name: HOUSES 1-3.xml
CFI R-PRF-01
Page 15 of 15
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete. .
Documentation Author Name:
Documentation Author Signature:
Fernando Rodriguez
Company:
Signature Date:
MRC Engineering, Inc.
2015-07-08 11:54:08
Address:
CEA/HERS Certification Identification (If applicable): ,
34300 Gateway Drive, Suite 120
City/State/Zip:
Phone: .
Palm Desert, CA 92211
760-340-9005
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance.
2. 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations. '
3. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications_ submitted tq tthe enforcement agency for, approval with; this. building permit application.
Responsible Designer Name:
It:
L
Responsible Designer Signature.
Fernando Rodriguez
;
H l 1
4
Company:
Date Signed:
07-08 �.
MRC Engineering, Inc.
20 5 11:5 :08
Address:
License:
34300 Gateway Drive, Suite 120
Randall V. Moss E.13453
City/State/Zip:
Phone:
Palm Desert, CA 92211
760-340-9005
Digitally signed by Ca10ERTS. This digital signature is provided in order to secure the content of this registered document, and in noway implies Registration Provider responsibility for the accuracy of the
information.
Registration Number: 215-No166363A-000000000-0000 Registration Date/Time: 2015-07-08 11:54:08 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report.Version - CF1R-07082015-710 Report Generated at: 2015-07-08 11:13:37
RESIDENTIAL MEASURES SUMMARY
RMS-1
Project Name
Houses #1-3 Cardinal Direction Calculatiot
Building Type m Single Family ❑ Addition Alone
❑ Multi Family ❑ Existing+ Addition/Alteration
Date
71812015
Project Address
The Orchards La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. Floor Area
3,636
Addition
n/a
# of Units
1
INSULATION
Construction Type
Area
Cavity (ft)
Special Features Status
Slab Unheated Slab -on -Grade
- no insulation 3,636
Perim = 0'
New
Roof - Wood Framed Attic
R 60 3,636
Cool Roof
New
Wall Wood Framed
R 21 2,715
New
Demising Wood Framed
R 23 432
New
FENESTRATION
Orientation Area ft2
I Total Area: 1,189 Glazing Percentage: 32.7 %
U-Fac SHGC Overhang Sidefins
New/Altered Average U-Factor: 0.46
Exterior Shades Status
Left (S) 55.2
0.380
0.25 3.0
none
Bug Screen New
Right (N) 55.2
0.380
0.25 3.0
none
Bug Screen New
Rear (IM 142.0
0.380
0.25 3.0
none
Bug Screen New
Rear (IM 70.0
0.380
0.25 3.0
none
Bug Screen New
Rear (tM 144.0
0.550
0.20 3.0
none
Bug Screen New
Rear (tM 48.0
0.420
0.23 3.0
none
Bug Screen New
Front (E) 105.5
0.380
0.25 3.0
none
Bug Screen New
Front (E) 36.7
0.740
0.19 3.0
none
Bug Screen New
Left (S) 36.0
0.380
0.25 none
none
Bug Screen New
Rear (K9 28.0
0.380
0.25 none
none
Bug Screen New
Right (N) 96.0
0.550
0.20 none
none
Bug Screen New
Left (S) 90.8
0.560
0.24 none
none
Bug Screen New
Front (E) 17.5
0.480
0.25 none
none
Bug Screen New
Right (N) 96.0
0.380
0.25 none
none
Bug Screen New
HVAC SYSTEMS
Qty. Heating
Min. Eff
Cooling
Min. Eff
Thermostat Status
1 Central Furnace
97% AFUE
Split Air Conditioner
16.0 SEER
Setback
New
1 Central.Fumace
97% AFUE
Split Air Conditioner
19.0 SEER
Setback
New
1 Central Furnace
97% AFUE
Split Air Conditioner
19.0 SEER
Setback
New
HVAC DISTRIBUTION
Location Heating
Cooling Duct Location
Duct
R-Value Status
FAU-5T Living, Dining, Kitc Ducted
Ducted Attic
4.2
New
FAU-3T Bedroom Wing Ducted
Ducted Attic
4.2
New
FAU-2T Master Suite 1 Ducted
Ducted Attic
4.2
New
WATER HEATING
Qty. Type
Gallons Min. Eff
Distribution Status
1 Indirect Gas
1
0.83
All Pipes Ins
New
1 Indirect Gas
1
0.82
All Pipes Ins
New
EnerqyPrp 6.5 by EnergySoft User Number: 5235
Runcode: 2015-07-08T13:03:38
ID:
Page 18 of 23
RESIDENTIAL MEASURES SUMMARY
RMS-1
Project Name
Houses #1-3 Cardinal Direction Calculatiot
Building Type m Single Family ❑ Addition Alone
❑ Multi Family ❑ Existing+ Addition/Alteration
Date
71812015
Project Address
The Orchards La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. Floor Area
3,636
Addition
n/a
# of Units
1
INSULATION
Construction Type
Area
Cavity (ft)Special Features Status
FENESTRATION I Total Area: 1,189 Gla'zing Percentage: 32.7 % New/Altered Average U-Factor: 0.46
Orientation Area ft2 U-Fac SHGC Overhang Sidefins Exterior Shades Status
Right (N) 96.0 0.420
0.23 none none Bug Screen New
Rear (Vt/) 72.0 0.550
0.20 none none Bug Screen New
HVAC SYSTEMS
Qty. Heating Min. Eff
Cooling Min. Eff Thermostat Status
HVAC DISTRIBUTION
Location Heating
Duct
Cooling Duct -Location R-Value Status
WATER HEATING
Qty. Type Gallons Min. Eff Distribution Status
Ener-qyPro 6.5 by EnemySoft User Number: 5235
RunCode: 2015-07-08T13:03:38 ID:
Page 19 of 23
2013 Low -Rise Residential Mandatory Measures Summary
NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the
compliance approach used. Exceptions may apply. Review the respective code section for more information.
Building Envelope Measures:
§I 10.6(a)1:
Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage.
§I 10.6(a)5:
Fenestration products (except field -fabricated windows) have a label listing the certified U-Factor, certified Solar Heat Gain
Coefficient SHGC , and infiltration that meets the requirements of §10-111 (a).
§ 110.7:
Exterior doors and windows are weatherstripped; all joints and penetrations are caulked and sealed.
§I 10.8(a):
Insulation specified or installed meets Standards for Insulating Material. Indicate type and include on the CF2R.
§ 110.8(i):
The thermal emittance and aged solar reflectance values of the cool roofmg material meets the requirements of § 110.8(i) when the
installation of a cool roof is specified on the CF1R.
§110.80):
A radiant barrier shall have an emittance of 0.05 or less when the installation of a radiant barrier is specified on the CFIR.
Minimum R-30 insulation in wood -frame ceiling; or the weighted average U-factor shall not exceed 0.031. Minimum R-19 in a
§ I50.0(a):
rafter roof alteration. Attic access doors shall have permanently attached insulation using adhesive or mechanical fasteners. The
attic access shall be gasketed to prevent air leakage.
§150.0(b):
Loose fill insulation shall conform with manufacturer's installed design labeled R-value.
§150.0(c):
Minimum R-13 insulation in 2x4 inch wood framing wall or have a U-factor of 0.102 or less (R-19 in 2x6 or 0.074 maximum U-
factor).
§ 150.0(d):
Minimum R-19 insulation in raised wood -frame floor or 0.037 maximum U-factor.
§150.0(g)l:
In Climate Zones 14 and 16 a Class II vapor retarder shall be installed on the conditioned space side of all insulation in all exterior
walls, vented attics and unvented attics with air -permeable insulation.
§ 150.0(g)2:
In Climate Zones 1-16 with unvented crawl spaces the earth floor of the crawl space shall be covered with a Class I or Class I1
vapor retarder.
In a building having a controlled ventilation crawl space, a Class I or Class 11 vapor retarder shall be placed over the earth floor of
§ I50.0(g)3:
the crawl space to reduce moisture entry and protect insulation from condensation, as specified in the exception to Section
150.0(d).
§150.0(1):
Slab edge insulation shall: have a water absorption rate, for the insulation material alone without facings, no greater than 0.3%;
have water vapor permeance rate is no greater than 2.0 perm/inch, be protected from physical damage and UV light deterioration;
and when installed as part of a heated slab floor meets the requirements of § 110.8
150.0
§ (q)'
Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors shall have a maximum U-
factor of 0.58; or the weighted average U-factor of all fenestration shall not exceed 0.58.
Fireplaces, Decorative Gas Appliances and Gas Log Measures:
§150.0(e)IA:
Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox.
§150.0(e)1B:
Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is
equipped with a readily accessible, operable, and tight -fitting damper or a combustion -air control device.
§150.0(e)]C:
Masonry or factory -built fireplaces have a flue damper with a readily accessible control.
§150.0(e)2:
Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside
of the building, are prohibited.
Space Conditioning, Water Heating and Plumbing System Measures:
§110.0-§110.3:
HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified to the Energy Commission.
§ I10.3(c)5:
Water heating recirculation loops serving multiple dwelling units meet the air release valve, backflow prevention, pump isolation
valve, and recirculation loop connection requirements of § 110.3(c)5.
Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances (appli-
§110.5:
ances without an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool
ands a heaters.
§150.0(h)l:
Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA using design conditions specified
in §150.0(h)2.
§150.0(h)3A:
Installed air conditioner and heat pump outdoor condensing units shall have a clearance of at least five feet from the outlet of any
dryer vent.
§150.0(i):
Heating systems are equipped with thermostats that meet the setback requirements of §I 10.2(c).
§150.00)IA:
Storage gas water heaters with an energy factor equal to or less than the federal minimum standards shall be externally wrapped
with insulation having an installed thermal resistance of R-12 or greater.
§]50.00)IB:
Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water -heating systems, have R-12 external
insulation or R-16 internal insulation where the internal insulation R-value is indicated on the exterior of the tank.
For domestic hot water system piping, whether buried or unburied: the first 5 feet of hot and cold water pipes from the storage
tank, all piping with a nominal diameter of 3/4 inch or larger, all piping associated with a domestic hot water recirculation system
§ 150.00)2A:
regardless of the pipe diameter, piping from the heating source to storage tank or between tanks, piping buried below grade, and
all hot water pipes from the heating source to kitchen fixtures must be insulated according to the requirements of TABLE 120.3-
A.
§ 150.00)2B:
All domestic hot water pipes that are buried below grade must be installed in a water proof and non -crushable casing or sleeve
that allows for installation, removal, and replacement of the enclosed pipe and insulation.
2013 Low -Rise Residential Mandatory Measures Summary
§150.00)2C:
Pipe for cooling system lines shall be insulated as specified in §150.00)2A. Piping insulation for steam and hydronic heating
systems or hot waters stems with pressure > 15 psig shall meet the requirements in TABLE 120.3-A.
§150.00)3:
Insulation is protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
Insulation exposed to weather shall either be rated for outdoor use or installed with a cover suitable for outdoor service. For
§150.00)3A:
example, protected by aluminum, sheet metal, painted canvas, or plastic cover. Cellular foam insulation protected as specified or
painted with coating that is water retardant and provides shielding from solar radiation that degrades the material.
Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space shall have a Class I
§150.00)3B:
or Class II vapor retarding facing, or the insulation shall be installed at the thickness that qualifies as a Class I or Class II vapor
retarder.
Systems using gas or propane water heaters to serve individual dwelling units shall include: a 120V electrical receptacle within 3
feet of the water heater; a Category III or IV vent, or a Type B vent with straight pipe between the outside termination and the
§150.0(n)l:
space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the installed
water heater, and allows natural draining without pump assistance; and a gas supply line with a capacity of at least 200,000
Btu/hr.
§150.0(n)2:
Recirculating loops serving multiple dwelling units shall meet the requirements of §110.3(c)5.
§150.0(n)3:
Solar water -heating systems and collectors shall be certified and rated by the Solar Rating and Certification Corporation (SRCC)
or by a testing agency approved by the Executive Director.
Ducts and Fans Measures:
All air -distribution system ducts and plenums installed are sealed and insulated to meet the requirements of CIVIC §601.0, §602.0,
§603.0, §604.0, §605.0 and ANSUSMACNA-006-2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition.
Supply -air and retum-air ducts and plenums are insulated to a minimum installed level of R-6.0 (or higher if required by CMC
§605.0) or enclosed entirely in directly conditioned space as confirmed through field verification and diagnostic testing
(RA3.1.4.3.8). Connections of metal ducts and inner core of flexible ducts are mechanically fastened. Openings shall be sealed
§ 150.0(m)1:
with mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181B or
aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than ''A inch, the
combination of mastic and either mesh or tape shall be used. Building cavities, support platforms for air handlers, and plenums
defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying
conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms
shall not be compressed to cause reductions in the cross -sectional area of the ducts.
Factory -Fabricated Duct Systems shall comply with specified requirements for duct construction, connections, and closures; joints
§ 150.0(m)2:
and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes unless such tape is
used in combination with mastic and draw bands.
§150.0(m)3-6:
Field -Fabricated Duct Systems shall comply with requirements for: pressure -sensitive tapes, mastics, sealants, and other
requirements specified for duct construction; duct insulation R-value ratings; duct insulation thickness; and duct labeling.
§ 150.0(m)7:
All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or automatic
dampers.
§ I50.0(m)8:
Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers
except combustion inlet and outlet air openings and elevator shaft vents.
Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind but not
§150.0(m)9:
limited to the following: insulation exposed to weather shall be suitable for outdoor service. For example, protected by aluminum,
sheet metal, painted canvas, or plastic cover. Cellular foam insulation shall be protected as above or painted with a coating that is
water retardant and provides shielding from solar radiation.
§I50.0(m)10:
Flexible ducts cannot have porous inner cores.
When space conditioning systems use forced air duct systems to supply conditioned air to an occupiable space, the ducts shall be
§I50.0(m)11:
sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in accordance with Reference
Residential Appendix RA3.
Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal
§150.0(m)12:
conditioning component, except evaporative coolers, shall be provided with air filter devices that meet the requirements of
§150.0(m)12.
Space conditioning systems that utilize forced air ducts to supply cooling to an occupiable space shall have a hole for the
placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPP) in the supply plenum. The
§ 150.0(m)13:
space conditioning system must also demonstrate airflow > 350 CFM per ton of nominal cooling capacity through the return
grilles, and an air -handling unit fan efficacy <_ 0.58 W/CFM as confirmed by field verification and diagnostic testing, in
accordance with Reference Residential Appendix RA3.
Zonally controlled central forced air cooling systems shall be capable of simultaneously delivering, in every zonal control mode,
§ 150.0(m)15:
an airflow from the dwelling, through the air handler fan and delivered to the dwelling, of> 350 CFM per ton of nominal cooling
capacity, and operating at an air -handling unit fan efficacy of 5 0.58 W/CFM as confirmed by field verification and diagnostic
testing, in accordance with Reference Residential Appendix RA3.
All dwelling units shall meet the requirements of ASHRAE Standard 62.2. Neither window operation nor continuous operation of
§ 150.0(o):
central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of providing the
Whole Building Ventilation.
§150.0(o)IA:
Whole Building Ventilation airflow shall be confirmed through field verification and diagnostic testing, in accordance with
Reference Residential Appendix RA3.
Pool and Spa Heating Systems and Equipment Measures:
Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency
§ 110.4(a):
Regulations; an on -off switch mounted outside of the heater that allows shutting off the heater without adjusting the thermostat
setting; a permanent weatherproof plate or card with operating instructions; and shall not use electric resistance heating.
2013 Low -Rise Residential Mandatory Measures Summary
§110.4(b)l:
Any pool or spa heating equipment shall be installed with at least 36 inches of pipe between filter and heater or dedicated suction
and return lines, or built-up connections for future solar heating.
§I 10.4(b)2:
Outdoor pools or spas that have a heat pump or gas heater shall have a cover.
§110.4(b)3:
Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or pro -
rammed to run only during off-peak electric demand periods.
§ 110.5:
Natural gas pool and spa heaters shall not have a continuous burning pilot light.
§150.0(p):
Residential pool systems or equipment shall meet specified pump sizing, flow rate, piping, filters, and valve requirements.
Lighting Measures:
§ 110.9:
All lighting control devices and systems, ballasts, and luminaires shall meet the applicable requirements of § 110.9.
§150.0(k)IA:
Installed luminaires shall be classified as high -efficacy or low -efficacy for compliance with §150.0(k) in accordance with TABLE
150.0-A or TABLE 150.0-B, as applicable.
§150.0(k)1B:
When a high efficacy and low efficacy lighting system are combined in a single luminaire, each system shall separately comply
with the applicable provisions of § 150.0(k).
The wattage and classification of permanently installed luminaires in residential kitchens shall be determined in accordance with
§150.0(k)] C:
§130.0(c). In residential kitchens, the wattage of electrical boxes finished with a blank cover or where no electrical equipment has
been installed, and where the electrical box can be used for a luminaire or a surface mounted ceiling fan, shall be calculated as 180
watts of low efficacy lighting er electrical box.
§150.0(k)1D:
Ballasts for fluorescent lamps rated 13 watts or greater shall be electronic and shall have an output frequency no less than 20 kHz.
Permanently installed night lights and night lights integral to installed luminaires or exhaust fans shall be rated to consume no
§150.0(k)]E:
more than 5 watts of power per luminaire or exhaust fan as determined in accordance with §130.0(c). Night lights do not need to
be controlled by vacancy sensors.
§ 150.0(k)1F:
Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods) shall meet the applicable
requirements of § 150.0(k).
§150.0(k)2A:
High efficacy luminaires must be switched separately from low efficacy luminaires.
§150.0(k)2B:
Exhaust fans shall be switched separately from lighting systems.
§150.0(k)2C:
Luminaires shall be switched with readily accessible controls that permit the luminaires to be manually switched ON and OFF.
§150.0(k)2D:
Controls and equipment are installed in accordance with manufacturer's instructions.
§150.0(k)2E:
No control shall bypass a dimmer or vacancy sensor function if the control is installed to comply with §150.0(k).
§ ] 50.0(k)2F:
Lighting controls comply with applicable requirements of § 110.9.
An Energy Management Control System (EMCS) may be used to comply with dimmer requirements if. it functions as a dimmer
§150.0(k)2G:
according to §110.9; meets Installation Certificate requirements of §130.4; the EMCS requirements of §130.5; and all other
requirements in §I50.0(k)2.
An Energy Management Control System (EMCS) may be used to comply with vacancy sensor requirements of § I50.0(k) if. it
§150.0(k)2H:
functions as a vacancy sensor according to §110.9; meets Installation Certificate requirements of §130.4; the EMCS requirements
of §130.5; and all other requirements in §150.0(k)2.
§ 150.0(k)2I:
A multiscene programmable controller may be used to comply with dimmer requirements of this section if it provides the
functionality of a dimmer according to §110.9, and complies with all other applicable requirements in §I50.0(k)2.
§150.0(k)3A:
A minimum of 50 percent of the total rated wattage of permanently installed lighting. in kitchens shall be high efficacy.
Kitchen lighting includes all permanently installed lighting in the kitchen except internal lighting in cabinets that illuminate only
§ 150.0(k)3B:
the inside of the cabinets. Lighting in areas adjacent to the kitchen, including but not limited to dining and nook areas, are
considered kitchen lighting if they are not separately switched from kitchen lighting.
§150.0(k)4:
Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of illuminated
cabinet.
§ 150.0(k)5:
A minimum of one high efficacy luminaire shall be installed in each bathroom; and all other lighting installed in each bathroom
shall be high efficacy or controlled by vacancy sensors.
§150.0(k)6:
Lighting installed in attached and detached garages, laundry rooms, and utility rooms shall be high efficacy luminaires and
controlled by vacancy sensors.
§I50.0(k)7:
Lighting installed in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms shall be high
efficacy, or shall be controlled by either dimmers or vacancy sensors.
Luminaires recessed into ceilings shall: be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other
nationally recognized testing/rating laboratory; have a label that certifies that the luminaire is airtight with air leakage less than 2.0
CFM at 75 Pascals when tested in accordance with ASTM E283; be sealed with a gasket or caulk between the luminaire housing
§150.0(k)8:
and ceiling, and shall have all air leak paths between conditioned and unconditioned spaces sealed with a gasket or caulk: and
allow ballast maintenance and replacement without requiring cutting holes in the ceiling.
For recessed compact fluorescent luminaries with ballasts to qualify as high efficacy for compliance with § I50.0(k), the ballasts
shall be certified to the Energy Commission to comply with the applicable requirements in § 110.9.
For single-family residential buildings, outdoor lighting permanently mounted to a residential building or other buildings on the
same lot shall be high efficacy, or may be low efficacy if it meets all of the following requirements:
i. Controlled by a manual ON and OFF switch that does not override to ON the automatic actions of Items ii or iii below; and
§ I50.0(k)9A:
ii. Controlled by a motion sensor not having an override or bypass switch that disables the motion sensor, or controlled by a
motion sensor having a temporary override switch which temporarily bypasses the motion sensing function and automatically
reactivates the motion sensor within 6 hours; and
iii. Controlled by one of the following methods:
t 'i
2013 Low -Rise Residential Mandatory Measures Summary
a. Photocontrol not having an override or bypass switch that disables the photocontrol; or
b. Astronomical time clock not having an override or bypass switch that disables the astronomical time clock, and which is
programmed to automatically turn the outdoor lighting OFF during daylight hours; or
c. Energy management control system which meets all of the following requirements: At a minimum provides the functionality of
an astronomical time clock in accordance with §110.9; meets the Installation Certification requirements in §130.4; meets the
requirements for an EMCS in §130.5; does not have an override or bypass switch that allows the luminaire to be always ON; and,
is programmed to automatically turn the outdoor lighting OFF during daylight hours.
For low-rise multifamily residential buildings, outdoor lighting for private patios, entrances, balconies, and porches; and outdoor
lighting for residential parking lots and residential carports with less than eight vehicles per site shall comply with one of the
§ 150.0(k)9B:
following requirements:
i. Shall comply with § 150.0(k)9A; or
ii. Shall comply with the applicable requirements in §110.9, §130.0, §130.2, §130.4, §140.7 and §141.0.
§150.0(k)9C:
For low-rise residential buildings with four or more dwelling units, outdoor lighting not regulated by §150.0(k)9B or 150.0(k)9D
shall comply with the applicable requirements in §110.9, §130.0, §130.2, §130.4, §140.7 and §141.0.
§ 150.0(k)9D:
Outdoor lighting for residential parking lots and residential carports with a total of eight or more vehicles per site shall comply
with the applicable requirements in §110.9, §130.0, §130.2, §130.4, §140.7 and §141.0.
§I50.0(k)10:
Internally illuminated address signs shall comply with §140.8; or shall consume no more than 5 watts of power as determined
according to §130.0(c).
§ 150.0(k)11:
Lighting for residential parking garages for eight or more vehicles shall comply with the applicable requirements for
nonresidential garages in §110.9, §130.0, §130.1, §130.4, §140.6, and §141.0.
In a low-rise multifamily residential building where the total interior common area in a single building equals 20 percent or less of
§ I 50.0(k)l 2A:
the floor area, permanently installed lighting for the interior common areas in that building shall be high efficacy luminaires or
controlled by an occupant sensor.
In a low-rise multifamily residential building where the total interior common area in a single building equals more than 20
percent of the floor area, permanently installed lighting in that building shall:
§I50.0(k)1213:
i. Comply with the applicable requirements in §110.9, §130.0, §130.1, §140.6 and §141.0; and
ii. Lighting installed in corridors and stairwells shall be controlled by occupant sensors that reduce the lighting power in each
space by at least 50 percent. The occupant sensors shall be capable of turning the light fully On and Off from all designed paths of
ingress and egress.
Solar Ready Buildings:
Single family residences located in subdivisions with ten or more single family residences and where the application for a
§110.10(a)l:
tentative subdivision map for the residences has been deemed complete, by the enforcement agency, on or after January 1, 2014,
shall comply with the requirements of § 110.10(b) through § 110.10(e).
§I 10.10(a)2:
Low-rise multi -family buildings shall comply with the requirements of §I10.10(b) through §I 10.10(d).
The solar zone shall have a minimum total area as described below. The solar zone shall comply with access, pathway, smoke
ventilation, and spacing requirements as specified in Title 24, Part 9 or other Parts of Title 24 or in any requirements adopted by a
local jurisdiction. The solar zone total area shall be comprised of areas that have no dimension less than 5 feet and are no less than
80 square feet each for buildings with roof areas less than or equal to 10,000 square feet or no less than 160 square feet each for
§110.10(b)l:
buildings with roof areas greater than 10,000 square feet.
For single family residences the solar zone shall be located on the roof or overhang of the building and have a total area no less
than 250 square feet. For low-rise multi -family buildings the solar zone shall be located on the roof or overhang of the building or
on the roof or overhang of another structure located within 250 feet of the building or on covered parking installed with the
building project and have a total area no less than 15 percent of the total roof area of the building excluding any skylight area.
§ 110.10(b)2:
All sections of the solar zone located on steep -sloped roofs shall be oriented between 110 degrees and 270 degrees of true north.
§ 110.10(b)3A:
No obstructions, including but not limited to, vents, chimneys, architectural features, and roof mounted equipment, shall be
located in the solar zone.
Any obstruction, located on the roof or any other part of the building that projects above a solar zone shall be located at least twice
§ 110.10(b)3B:
the distance, measured in the horizontal plane, of the height difference between the highest point of the obstruction and the
horizontal projection of the nearest point of the solar zone, measured in the vertical plane.
§ 110.10(b)4:
For areas of the roof designated as solar zone, the structural design loads for roof dead load and roof live load shall be clearly
indicated on the construction documents.
The construction documents shall indicate: a location for inverters and metering equipment and a pathway for routing of conduit
§ 110.10(c):
from the solar zone to the point of interconnection with the electrical service (for single family residences the point of
interconnection will be the main service panel); a pathway for routing of plumbing from the solar zone to the water -heating
system.
§ 110.10(d):
A copy of the construction documents or a comparable document indicating the information from § 110.10(b) through § 110.10(c)
shall be provided to the occupant.
§110.10(e)l:
The main electrical service panel shall have a minimum busbar rating of 200 amps.
The main electrical service panel shall have a reserved space to allow for the installation of a double pole circuit breaker for a
§I 10.10(e)2:
future solar electric installation. The reserved space shall be: positioned at the opposite (load) end from the input feeder location or
main circuit location, and permanently marked as "For Future Solar Electric'.
v�
BUILDING ENERGY ANALYSIS REPORT
PROJECT:
Houses-#4=6_Cardinal Direction Calculations
The Orchards
La Quinta, CA
ti• .
Project Designer:
Elemental Architecture
1555 S Palm Canyon Drive, Suite D202 ,
Palm Springs, CA 92264
Report Prepared by:
Fernando A. Rodriguez
MRC Engineering, INC
,.34300 Gatewa Drive 120
Palm exert, CA 9PH
7 040 o�05E ri j
v
m�zp
R.
(NNE"., ECEIVED'
0C
C
Jo Nu ;cc m JUL 2 8 2015
• cOMM1J&'I7j, D QUINTq
�E! OPMENT
Date:
7/8/2015 r
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2013 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC—www.energysoft.com.
EnergyPro 6.5 by EnergySoft User Number.- 5235 ID:
TABLE OF CONTENTS
Cover Page 1
Table of Contents 2
Form CF-1 R-PRF-01-E Certificate of Compliance 3
Form RMS-1 Residential Measures Summary 15
Form MF-1 R Mandatory Measures Summary 17
y
t
EnergyPro 6.5 by EnergySoft Job Number: ID: User Number: 5235
r
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #4-6 Cardinal Direction Calculations Calculation Date/Time: 11:12, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis
Input File Name: HOUSES 4-6.xml
CF1 R-PRF-01
Page 1 of 12
GENERAL INFORMATION
01
Project Name
Houses #4-6 Cardinal Direction Calculations
02
Calculation Description
Title 24 Analysis
03
Project Location
The Orchards
04
City
La Quinta
05
Standards Version
Compliance 2015
06
Zip Code
07
Compliance Manager Version
BEMCmpMgr 2013-3c (710)
08
Climate Zone
CZ15
09
Software Version
EnergyPro 6.5
10
Building Type
Single Family
11
Front Orientation (deg/Cardinal)
Cardinal
12
Project Scope
Newly Constructed
13
Number of Dwelling Units
1
14
Total Cond. Floor Area (ft)
3481
15
Number of Zones
3
16
Slab Area (ft2)
3481
17
Number of Stories
1
18
Addition Cond. Floor Aiea
N/A
19
Natural Gas Available
Yes
20
Addition Slab Area (ft2)
N/A
21
Glazing Percentage (%)
24.2%
This compliance analysis is valid only for permit applications through July 31, 2015
fir
I f I 'Ir r fl
r<
COMPLIANCE RESULTS 1..' 4-'. 'a
01
Building Complies with Computer Performance
02
This building incorporates features that requiPe field Testing and/or verification by a certifed HERS rater under fhe supervision"of a CEC-approved HERS provider.
03
This building incorporates one or more Special Features shown below
Registration Number: 215-No186365A-000000000-0000 Registration Date/Time: 2015-07-0811:55:23 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance - Report Version - CF1R-07082015-710 Report Generated at: 2015-07-0811:16:51
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #4-6 Cardinal Direction Calculations Calculation Date/Time: 11:12, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis
Input File Name: HOUSES 4-6.xml
CFI R-PRF-01
Page 2 of 12
ENERGY USE SUMMARY
Energy Use
Standard
Proposed
Compliance
Percent
(kTDV/ft2-yr)
Design
Design .
Margin
Improvement
Space Heating
1.94
3.34
-1.40
-72.2%
Space Cooling
79.89
70.95
8.94
11.2%
IAQ Ventilation
1.02
1.02
0.00
0.0%
Water Heating
7.37
5.31
2.06
28.0%
PV Credit
----
0.00
0.00
North Facing Compliance Total
90.22
80.62
9.60
10.6%
Space Heating
1.94
4.88
-2.94
-151.5%
Space Cooling
79.89
73.49
6.40
8.0%
IAQ Ventilation
1.02
1.02
0.00
0.0%
Water Heating
7.37
5.31
a 2.06
28.0%
PV Credit
' . '` ----
0.00
0.00
----
East Facing Compliance Total ;'
90.22
84.70
5.52
6.1%
Space Heating
1.94
5.41
-3.47
-178.9%
Space Cooling
•.is
, 79.861-�
L
`r ; F'
S I �65:95
'
13.94
17.4%
IAQ Ventilation
e� i
1 02
�L02
✓�
I }',
0.00
0.0%
Water Heating
, `�� 4 ti 7 37� 5:s i
{ r 5:31
+cj
2.06
28.0%
PV Credit
(
; P� s
f 000
0.00
----
South Facing Compliance Total
90.22
77:69
12.63
13.9/0
Space Heating
1.94
3.87
-1.93
-99.5%
Space Cooling
79.89
68.30
11.59
14.5%
IAQ Ventilation
1.02
1.02
0.00
0.0%
Water Heating
7.37
5.31
2.06
28.0%
PV Credit
----
0.00
0.00
----
West Facing Compliance Total
90.22
78.50
11.72
13.0%
Registration Number: 215-No186365A-000000000-0000 Registration Date/Time: 2015-07-08 11:55:23 HERS Provider: . CaiCERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-08 11:16:51
,. CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD ,
Project Name: Houses #4-6 Cardinal Direction Calculations = - : Calculation Date/Time: �11:12, Wed, Jul 08, 2015,
Calculation Description: Title 24 Analysis Input File Name: HOUSES 4-6.xml
CFI R-PRF-01
i . Page 3 of .12. �-
REQUIRED SPECIAL FEATURES • r'
The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis.
Cool roof `
• Ceiling has high level of insulation '
• Window overhangs and/or fins
HERS FEATURE SUMMARY -
The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is
provided in the building components tables below.
Building -level Verifications: `
• IAQ mechanical ventilation ~ .
Cooling System Verifications: - -
• Minimum Airflow
•, Verified SEER _
• Refrigerant Charge,
• Fan Efficacy Watts/CFM' �-
HVAC Distribution System Verifications:
• Duct Sealing
Domestic Hot Water System Verificationsi , ,¢ - --None
ENERGY DESIGN RATINGfl • .. I
4e •.• -} d.9N ed' `-. ' .rt-r.r6a .,.RF` vn mM fW -zin<ii5 u,i i c' f F' e* btgn>'
This is the sum of the annual TDV energy con suinption.forrenergy use aomponenfs'.included mthe performance compliance approach for the Standard Design Building (Energy Budget) and the annual
TDV energy consumption for lighting and components not egulated by.Title 241 Part 6 (such as domestic`appliances'and consumer, electronics) and accounting for the annual TDV energy offset by an
on -site renewable energy system. _ '� i , ,- - 1 , 'i ''I` ' "Oe V i Wok 0 4 '
Reference Energy Use
- =_=V Energy Design Rating . ,
Margin
Percent Improvement
Total Energy (kTDV/f2-yr)"
"130.35
-_, 124.83 ; .b - "`
5.52 -
'- _ 4.2%
r * includes calculated Appliances and Miscellaneous Energy Use (AMEU)
BUILDING - FEATURES INFORMATION
01
02
03
04 '
05
06
07
-•
Number of Dwelling
-
Number of Ventilation
Number of Water
Project Name +
Conditioned Floor Area (ft2)
Units
Number of Bedrooms
Number of Zones
- - Cooling Systems
Heating Systems '
Houses #4-6 Cardinal Direction
3481
5•
3
- 0
2 ;
. - Calculations
ere Registration Number.'215-N0186365A-000000000-0000 9, Registration Date/Time 2015-07-081L55:23 .
~ CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version'- CF1R-07082015-710
HERS Provider: " - CalCERTS inc..
Report Generated at: 2015 07 08 11:16:51• -
'+
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #4-6 Cardinal Direction Calculations Calculation Date/Time: 11:12, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis
Input File Name: HOUSES 4-6.xml
CFI R-PRF-01
Page 4 of 12
ZONE INFORMATION
01
02
03
04
05
06
07
Zone Name
Zone Type
HVAC System Name
Zone Floor Area
(ft2)
Avg. Ceiling
Height
Water Heating System 1
Water Heating System 2
Living, Dining, Kitchen,
Conditioned
FAU-4T Living, Dining, Kit
1666
12.7407
DHW Sys 1
Bedroom Wing
Conditioned
FAU-3T Bedroom Wing2
1210
8.5
DHW Sys 3
Master Suite 1
Conditioned
FAU-2T Master Suite 13
605
8.5
DHW Sys 3
OPAQUE SURFACES
01
02
03
04
05
06
07
08
Name
Zone
Construction
Azimuth
Orientation
Gross Area (ft2)
Window & Door Area (ft2)
Tilt (deg)
N-Wall
Living, Dining, Kitchen,
R-21 Wall
0
Right
475.3
212
90
S-Wall
Living; Dining, Kitchen,
R-21 Wall
180
Left
747.5
12
90
E-Wall
Living, Dining, Kitchen,..
R-21 Wall
90
Front
129.5
36.5924
90
W-Wall
N-Wall2
Living, Dining, Kitchen, _
Living, Dining, Kitchen'?
R-21 Wall
µ ^ 270
Back
iRight
207
127.5
124.908
30
90
90
Roof
Living; Dinin6,*itchen
1R-60 Roof Attic'- `
«.
,�
1570
Roof 2
Living, Dining?+ tchen,
=R A
- R;60 Roof Attic
bl's= yiy.eP�� ti!='4s. 4'Ati
i'+M. Ti R 1S-
_
M' k.. P1.�••. !�"T
96
.
N-Wall 3
Bedroom Wing .t
14`21 Wall9-A
-PiK '0' 4'
L-d` Right
250.8
12
90
E-Wall 2
Bedroom Wing
R-21 Wall
90
Front
136
90
S-Wall 2
Bedroom Wing
R-21 Wall
180
Left
63.8
90
W-Wall 2
Bedroom Wing
R-21 Wall
270
Back
136
72
90
W-Wall 3
Bedroom Wing
R-21 Wall ..
270
Back
164.3
74
90
W-Wall 4
Bedroom Wing
R-21 Wall
270
Back
106.3
64
90
E-Wall 3
Bedroom Wing
R-21 Wall
90
Front
263.5
79:1718
90
Roof 3
Bedroom Wing
R-60 Roof Attic
490
Roof 4
Bedroom Wing
R-60 Roof Attic
315
Roof 5
Bedroom Wing
R-60 Roof Attic
215
Roof 6
Bedroom Wing
R-60 Roof Attic
190
N-Wall 4
Master Suite 1
R-21 Wall
0
Right
160.1
42
90
W-Wall 5
Master Suite 1
R-21 Wall
270
Back
171.4
72
90
S-Wall 3
Master Suite 1
R-21 Wall
180
Left
287.6
12
90
Roof 7
Master Suite 1
R-60 Roof Attic
605
Registration Number: 215-No186365A-000000000-0000 Registration Date/Time: 2015-07-08 11:55:23 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-08 11:16:51
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #4-6 Cardinal Direction Calculations Calculation Date/Time: 11:12, Wed, Jul 08, 2015'
Calculation Description: Title 24 Analysis Input File Name: HOUSES 4-6.xml
CFI R-PRF-01
Page 5 of 12
ATTIC
01
02
03
04
05
06
07
08
Name
Construction
Type
Roof Rise
Roof Reflectance
Roof Emittance
Radiant Barrier
Cool Roof
Attic Living, Dining, Kitchen,
Attic RoofLiving, Dining,
Kitchen,
Unventilated
0
0.77
0.87
Yes
Yes
Attic Bedroom Wing
Attic RoofBedroom Wing
Unventilated
.0
0.77
0.87
Yes
Yes
Attic Master Suite 1
Attic RoofMaster Suite 1
Unventilated
0
0.77
0.87
Yes
Yes
4
L E F-Cr
7 n c
1c- fit.
Registration Number: 215-No186365A-000000000-0000 Registration Date/Time: 2015-07-08 11:55:23
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CFIR-07082015-710
HERS Provider: CaICERTS inc.
Report Generated at: 2015-07-08 11:16:51
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #4-6 Cardinal Direction Calculations Calculation Date/Time: 11:12, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis
Input File Name: HOUSES 4-6.xml
CFI R-PRF-01
Page 6 of 12
WINDOWS
01
02
03
04
05
06
07
08
09
10
Name
Type
Surface (Orientation -Azimuth)
Width (ft)
Height (ft)
Multipli
er
Area
(ft)
U-factor
SHGC
Exterior Shading
C
Window
N-Wall (Right-0)
9.0
4.0
1
36.0
0.38
0.25
Insect Screen (default)
C 2
Window
N-Wall (Right-0)
8.0
4.0
1
32.0
0.38
0.25
Insect Screen (default)
06
Window
N-Wall (Right-0)
9.0
8.0
1
72.0
0.55
0.20
Insect Screen (default)
07
Window
N-Wall (Right-0)
9.0
8.0
1
72.0
0.55
0.20
Insect Screen (default)
G
Window
S-Wall (Left-180)
6.0
2.0
1
12.0
0.38
0.25
Insect Screen (default)
F
Window
E-Wall (Front-90)
2.8
11.8
1.093
36.6
0.56
0.24
Insect Screen (default)
A
Window
W-Wall (Back-270)
5.0
2.5
1
12.5
0.38
0.25
Insect Screen (default)
B
Window
y� W-Wall (Back-270)
8.0
4.0
1
32.0
0.38
0.25
Insect Screen (default)
J
Window
F W-Wall (Back-270)
2.3
7.0
1.006
16.4.
0.38
0.25
Insect Screen (default)
08
Window
t W-Wall (Back-270)
8.0
8.0
1
64.0
0.42
0.23
Insect Screen (default)
I
Window
WWall 2 (Right-0)
5.0
2.0
1
10.0
0.38
0.25
Insect Screen (default)
12
Window
N-Wall; 2 (Right-0)1 f7:t
,-,,, E5 0
:� 2.0
1
10.0
0.38
0.25
Insect Screen (default)
13
Window
r , '. ..� W"Wall 2 (RightO). �a
•:, 5 0 �*
2.0
. �r1
s 10.0
0.38
0.25
Insect Screen (default)
G 2
11
Window
Window
' N Wall.3 (Ftight`0)
W-Wall 2i Back=270
6'y0
9:0
2:0
-8;0
112.0
T:
72.0
0.38
0.55
0.25
0.22
Insect Screen (default)
Insect Screen default
14
Window
W-Wall 3 (Back-270)
5.0
2.0
1
10.0
0.38
0.25
Insect Screen (default)
09
Window
W-Wall 3 (Back-270)
8.0
8.0
1
64.0
0.42
0.23
Insect Screen (default)
10
Window
W-Wall 4 (Back-270)
8.0
8.0
1
64.0
0.42
0.23
Insect Screen (default)
D
Window
E-Wall 3 (Front-90)
6.5
2.0
0.869
11.3
0.38
0.25
Insect Screen (default)
D 2
Window
E-Wall 3 (Front-90)
6.5
2.0
0.869
11.3
0.38
0.25
Insect Screen (default)
D 3
Window
E-Wall 3 (Front-90)
6.5
2.0
0.869
11.3
0.38
0.25
Insect Screen (default)
01
Window
E-Wall 3 (Front-90)
5.7
8.0
0.993
45.3
0.74
0.19
Insect Screen (default)
H
Window
N-Wall 4 (Right-0)
6.0
7.0
1
42.0
0.38
0.25
Insect Screen (default).
05
Window
W-Wall 5 (Back-270)
9.0
8.0
1
72.0
0.55
6.20
Insect Screen (default)
G 3
Window
S-Wall 3 (Left-180)
6.0
2.0
1
12.0
0.38
0.25
Insect Screen (default)
Registration Number: 215-N0186365A-000000000-0000 Registration Date/Time: 2015-07-08 11:55:23 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version,- CF1R-07082015-710 Report Generated at: 2015-07-08 11:16:51
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #4-6 Cardinal Direction Calculations Calculation Date/Time: 11: 12, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis
Input File Name: HOUSES 4-6.xml
CFI R-PRF-01
Page 7 of 12
OVERHANGS AND FINS
01
02
03
04
05
06
07
08
09
10
11
12
13
1 14
Overhang
Left Fin
Right.Fin
Window
Depth
Dist Up
Left
Extent
Right
Extent
Flap Ht.
Depth
Top Up
DistL
Bot Up
Depth
Top Up
Dist R
Bot Up
C
4
0.1
4.
4
0
0
0
0
0
0
0
0
0
C2
4
0.1
4
4
0
0
0
0
0
0
0
0
0
06
4
0.1
4
4
0
0
0
0
0
0
0
0
0
07
4
0.1
4
4
0
0
0
0
0
0
0
0
0
G
0
0
0
0
0
0
0
0
0
0
0
0
0
F
1.5
0.1
1.5
1.5
0
0
0
0
0
0
0
0
0
A
4
0.1
4
4
0-
0
0
0
0
0
0
0
0
B
4
0.1
4
4
0
0
0
0
0
0
0
0
0
J
4
0.1
4
4
0
0
0
0
0
0
0
0
0
08
4
0.1 -
4
4
0
0
0
0
0
0
0
0
0
3
0.13
3
0
0
0
0
0
0
0
12
3
0.1
3
?3
1
0k ,'
0, �'
:i%0
0
0
0
0
0
13
3
'0.1
.�`�-3�
yl
61 S3' 4
i --�Ow: F
:1 0
01� 1i
I.i��'.i
0
0
0
0
0
G 2
0
,0
LJ0
1:3 0 c
c0 . IL
e-,0
T 0;--'k
r: 0zl�
0
0
0
0
0
11
0
0
` 40
10
0
-d
0"
0-
0
0
0
0
0
14
1.5
0.1
1.5
1.5
0
0
0
0
0
0
0
0
0
09
1.5
0.1
1.5
1.5
0
0
0
0
0
0
0
0
0
10
1.5
0.1
1.5
1.5
0
0
0
0
0
0
0
0
0
D
5.5
0.1
5.5
5.5
0
0
0
0
0
0
0
0
0
D 2
5.5
0.1
5.5
5.5
0
0
0
0
0
0
0
0
0
D 3
5.5
0.1
5.5
5.5
0
0
0
0
0
0
0
0
0
01
5.5
0.1
5.5
5.5
0
0
0
0
0
0
0
0
0
H
1.5
0.1
1.5
1.5
0
0
0
0
0
0
0
0
0
05
1.5
0.1
1.5
1.5
0
0
0
0
0
0
0
0
0
G3
0
0
0
0
0
0
0
0
0
0
0
0
0
Registration Number: 215-N0186365A-000000000-0000 Registration Date/Time: - 2015-07-06 11:55:23 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-0811:16:51
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #4-6 Cardinal Direction Calculations Calculation Date/Time: 11:12, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSES 4-6.xml
CF1 R-PRF-01
Page 8of12
OPAQUE SURFACE CONSTRUCTIONS
01
02
03
04
05
06
07
Total Cavity
Winter Design
Construction Name
Surface Type
Construction Type
Framing
R-value
U-value
Assembly Layers
• Cavity/Frame: no insul. /2x4 Top Chrd
Attic RoofLiving, Dining,
2x4 Top Chord of Roof Truss @ 24
Roof Deck: Wood Siding/sheathing/decking
Kitchen,
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.644
Roofing: Light Roof (Asphalt Shingle)
• Inside Finish: Gypsum Board
Ceilings (below
Cavity/Frame: R-9.1 /2x4
R-60 Roof Attic
attic)
Wood Framed Ceiling
2x4 @ 24 in. O.C.
R 60
0.016
Over Floor Joists: R-50.9 insul.
• Inside Finish: Gypsum Board
• Cavity / Frame: R-21 / 2x6
• Exterior Finish: Wood
R-21 Wall
Exterior Walls :
Wood Framed Wall
2x6 @ 16 in. O.C. •.
R 21
0.066
Siding/sheathing/decking
• Cavity / Frame: no insul. / 2x4 Top Chrd
2x4 Top Chord of Roof Truss @ 24
Roof Deck: Wood Siding/sheathing/decking
Attic RoofBedroom Wing
Attic Roofs r '-
Wood Framed Ceiling
in. O.C.
none
0.644
Roofing: Light Roof (Asphalt Shingle)
Cavity /Frame: no insul. / 2x4 Top Chrd
2x4 Top Chord of Roof Truss @ 24
Roof Deck: Wood Siding/sheathing/decking
Attic RoofMaster Suite 1
Attic Roofs
Wood Framed;Ceiling
i n :� 0. 7.Z.
none;
0.644
Roofing: Light Roof (Asphalt Shingle)
SLAB FLOORS p..' \ �
1. U Kli It
01
' 02 l
03
-- p�04 '"
i 05
06
07
Name
Zone y
Area (ft2i
Perimeter (ft) A.•
Edge Insul. R-value & Depth
Carpeted Fraction
Heated
Slab -on -Grade
Living, Dining, Kitchen,
1570
0.1
None
0.8
No
Slab -on -Grade 2
Living, Dining, Kitchen,
96
0.1
None
0.8
No
Slab -on -Grade 3
Bedroom Wing
490
0.1
None
0.8
No
Slab -on -Grade 4
Bedroom Wing
315
0.1
None
0.8
No
Slab -on -Grade 5
Bedroom Wing
215
0.1
None
0.8
No
Slab -on -Grade 6
Bedroom Wing
190
0.1
None
0.8
No
Slab -on -Grade 7
Master Suite 1
605
0.1
None
0.8
No
BUILDING ENVELOPE - HERS VERIFICATION
01
02
03
04
Quality Insulation Installation (QII)
Quality Installation of Spray Foam Insulation
Building Envelope Air Leakage
ACH @ 50 Pa
Not Required
. Not Required
Not Required
---
Registration Number: 215-N0186365A-000000000-0000 Registration Date/Time: 2015-07-08 11:55:23 HERS Provider: CaiCERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-0811:16:51
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #4-6 Cardinal Direction Calculations Calculation Date/Time: 11:12, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis
Input File Name: HOUSES 4-6.xml
CF1 R-PRF-01
Page 9 of 12
WATER HEATING SYSTEMS
01
02
03
04
05
06
Name
System Type
Distribution Type
Water Heater
Number of Heaters
Solar Fraction (%)
DHW Sys 1 - 1/1
DHW
Pipe Insulation, All Lines
DHW Heater 1
1
.0%
DHW Sys 3 - 1/1
DHW
Pipe Insulation, All Lines
DHW Heater 3
1
.0%
WATER HEATERS
01
02
03
04
05
06
07
08
Name
Heater Element Type
Tank Type
Tank Volume
(gal)
Energy Factor or
Efficiency
Input Rating
Tank Exterior
Insulation
R-value
Standby Loss
(Fraction)
DHW Heater 1
Natural Gas
Indirect
0.5
0.83
180000-Btu/hr
12
0
DHW Heater 3
Natural Gas
Indirect
0.5
0.83
180000-Btu/hr
12
0
WATER HEATING - HERS VERIFICATION t-
01
02 r ' .,..t
3.
04
05
06
07
Name
Pipe Insulation
,Parallel Piping
(
Compact Distribution
Point -of Use
Recirculation
Control
Central DHW
Distribution
DHW Sys 1 - 1/1
"_ �'.
r 5 - _;, ._ .. u
ae
Q
---
---
DHW Sys 3 - 1/1
SPACE CONDITIONING SYSTEMS
01
02
03
04
05
06
SC Sys Name
System Type
Heating Unit Name
Cooling Unit Name
Fan Name
Distribution Name
FAU-4T Living, Dining, Kit
Other Heating and Cooling.
System
Heating Component 1
Cooling Component 1
HVAC Fan 1
Air Distribution System 1
FAU-3T Bedroom Wing2
Other Heating and Cooling
System
Heating Component 2
Cooling Component 2
HVAC Fan 2
Air Distribution System 2
FAU-2T Master Suite 13
Other Heating and Cooling
System
Heating Component 3
Cooling Component 3
HVAC Fan 3
Air Distribution System 3
Registration Number: 215-N0186365A-000000000-0000 Registration Date/Time: 2015-07-08 11:55:23 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-0811:16:51
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #4-6 Cardinal Direction Calculations Calculation Date/Time: 11:12, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSES 4-6.xml,
CF1 R-PRF-01
Page 10 of 12
HVAC - HEATING UNIT TYPES °
01
02
03
Name
Type.
Efficiency
Heating Component 1
CntrlFurnace - Fuel -fired central furnace
97.3 AFUE
Heating Component 2
CntrlFurnace - Fuel -fired central furnace
97.4 AFUE
Heating Component 3
CntrlFurnace - Fuel -fired central furnace
97.4 AFUE
HVAC - COOLING UNIT TYPES
01
02
03
04
05
06
07
Efficiency
Multi -speed
Name
System Type
EER SEER
Zonally Controlled
Compressor
HERS Verification
Cooling Component 1
SplitAirCond
13
18
Not Zonal
Multi -speed
Cooling Component
1-hers-cool
Cooling Component 2
SplitAirCond
13
19
Not Zonal
Multi -speed
Cooling Component
1-hers-cool
Cooling Component 3
SplitAirCond
13
19
Not Zonal
Multi -speed
Cooling Component
1-hers-cool
HVAC COOLING - HERS VERIFICATION �, '
�, 1 ,
01
, 02 t w ar^
^' 03t R �a ar
a # 04,E
05
06
Name
Verified Airflow
Airflow Target
Verified EER
Verified SEER
Verified Refrigerant
Charge
Cooling Component 1-hers-cool
Required
350
Not Required
Required
Required
Cooling Component 2-hers-cool
Required
350
Not Required
Required
Required
Cooling Component 3-hers-cool
Required
350
Not Required
Required
Required
HVAC - DISTRIBUTION SYSTEMS
01
02
03
04
.05
06
07
Name
Type
Duct Leakage
Insulation R-value
Duct Location
Bypass Duct
HERS Verification
Air Distribution System 1
DuctsAttic
Sealed and tested
4.2
Attic
None
Air Distribution System
1-hers-dist
Air Distribution System 2
DuctsAttic
Sealed and tested
4.2
Attic
None
Air Distribution System
2-hers-dist
Air Distribution System 3
DuctsAttic
Sealed and tested
4.2
Attic
None
Air Distribution System
3-hers-dist
Registration Number: 215-N0186365A-000000000-0000 Registration Date/Time: 2015-07-08 11:55:23 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-08 11:16:51
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #4-6 Cardinal Direction Calculations
Calculation Description: Title 24 Analysis
Calculation Date/Time: 11:12, Wed, Jul 08, 2015
Input File Name: HOUSES 4-6.xml
CF1 R-PRF-01
Page 11 of 12
HVAC DISTRIBUTION - HERS VERIFICATION
01
02
03
04
05
06
07
08 -
Name
Duct Leakage
Verification
Duct Leakage
Target (%)
Verified Duct
Location
Verified Duct
Design
Buried
Ducts
Deeply Buried
Ducts
Low -leakage
Air Handler
Air Distribution System 1-hers-dist
Required
6.0
Not Required
Not Required
Not Required
Not Required
---
Air Distribution System 2-hers-dist
Required
6.0
Not Required
Not Required
Not Required
Not Required
---
Air Distribution System 3-hers-dist
Required
6.0
Not Required
Not Required
Not Required
Not Required
HVAC -FAN SYSTEMS
01
02
03
04
Name
Type
Fan Power (Watts/CFM)
HERS Verification
HVAC Fan 1
Single Speed PSC Furnace Fan
0.58
HVAC Fan 1-hers-fan
HVAC Fan 2
Single Speed PSC Furnace Fan
0.58
HVAC Fan 2-hers-fan
HVAC Fan 3
Single Speed PSC Furnace Fan
0.58
HVAC Fan 3-hers-fan
HVAC FAN SYSTEMS - HERS VERIFICATION
�
}
01
[[ �
E r
{ �
J �i.02 1 �s
� � �
03
Name
ks'
y�_� rp$$' p}
;�a�,_.a._4'4 I If ��....-i.
q[ Verifietl Fan Watt Draw
R Veri i hs i rx..�� �
jj/j {{ {`
� �A ��.�-0ti
, Required Fan Efficiency (WattsICFM)
"4
HVAC Fan 1-hers-fan ?
, >
Required,
0.58
HVAC Fan 2-hers-fan
Required''" 'r k
`�"'"-" "
0.58
HVAC Fan 3-hers-fan
Required
0.58
IAQ (Indoor Air Quality) FANS
01
02
03
04
05
06
Dwelling Unit
IAQ CFM
IAQ Watts/CFM
IAQ Fan Type
IAQ Recovery
Effectiveness(%)
HERS Verification
SFam IAQVentRpt
79.81
0.25
Default
0
Required
Registration Number: 215-N0186365A-000000000-0000 Registration Date/Time: 2015-07-08 11:55:23 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-0811:16:51
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Houses #4-6 Cardinal Direction Calculations
Calculation Description: Title 24 Analysis
Calculation Date/Time: 11:12, Wed, Jul 08, 2015
Input File Name: HOUSES 4-6.xml
CFI R-PRF-01
Page 12 of 12
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
Documentation Author Signature:
Fernando Rodriguez
X
Company:
Signature Date:
MRC Engineering, Inc.
2015-07-08 11:55:23
Address:
CEA/HERS Certification Identification (If applicable):
34300 Gateway Drive, Suite 120
City/State/Zip:
Phone:
Palm Desert, CA 92211
760-340-9005
RESPONSIBLE PERSON'S DECLARATION STATEMENT
11
I certify the following under penalty of perjury, under the laws of the State of California:
1. I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance:
2. 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
3. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to.the enforcement agency.,for approval.wth this.building permit application.
Responsible Designer Name:
J L
1,
Responsible Designer Signature;
Fernando Rodriguez
C li
Company: p
Date.Signed:`
07 � 3
MRC Engineering, Inc.
2015 0811:55:23
: 5:
Address:
License:
34300 Gateway Drive, Suite 120
Randall V. Moss E.13453
City/State/Zip:
Phone:
Palm Desert, CA 92211
760-340-9005
Digitally signed by CaICERTS. This digital signature is provided in order to secure the content of this registered document, and in no way implies Registration Provider responsibility for the accuracy of the
information.
Registration Number: 215-No186365A-000000000-0000 Registration Date/Time: .2015-07-08 11:55:23 HERS Provider: CaiCERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-08 11:16:51
RESIDENTIAL MEASURES SUMMARY
RMS-1
Project Name
Houses #4-6 Cardinal Direction Calculatiot
Building Type m Single Family ❑ Addition Alone
❑ Multi Family ❑ Existing+ Addition/Alteration
Date
71812015
Project Address
The Orchards La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. Floor Area
3,481
Addition
n/a
# of Units
1
INSULATION
Construction Type
Area
Cavity ftz
Special Features Status
Slab Unheated Slab -on -Grade
no insulation 3,481
Perim = 0'
New
Roof Wood Framed Attic
R 60 3,481
Cool Roof
New
Wall Wood Framed
R 21 2,584
New
Demising Wood Framed
R 23 358
New
FENESTRATION
Orientation Area(f 2)
I Total Area: 843 Glazing Percentage: 24.2 %
U-Fac SHGC Overhang Sidefins
New/Altered Average U-Factor: 0.47
Exterior Shades Status
Right (N) 68.0
0.380
0.25 4.0
none
Bug Screen New
Right (N) 144.0
0.550
0.20 4.0
none
Bug Screen
New
Left (S) 24.0
0.380
0.25 none
none
Bug Screen
New
Front (E) 36.6
0.560
0.24 1.5
none
Bug Screen
New
Rear (IM 60.9
0.380
0.25 4.0
none
Bug Screen 'New
Rear (W) 64.0
0.420
0.23 4.0
none
Bug Screen
New
Right (N) 30.0
0.380
0.25 3.0
none
Bug Screen
New
Right (N) 12.0
0:380
0.25 none
none
Bug Screen
New
Rear (W) 72.0
0.550
0.22 none
none
Bug Screen
New
Rear (W) 10.0
0.380
0.25 1.5
none
Bug Screen
New
Rear (W) 128.0
0.420
0.23 1.5
none
Bug Screen
New
Front (E) 33.9
0.380
0.25 5.5
none
Bug Screen
New
Front (E) 45.3
0.740
0.19 5.5
none
Bug Screen
New
Right (N) 42.0
0.380
0.25 1.5
none
Bug Screen
New
HVAC SYSTEMS
Qty. Heating
Min. Eff
Cooling
Min. Eff
Thermostat Status
1 Central Furnace
97% AFUE
Split Air Conditioner
18.0 SEER
Setback
New
1 Central Furnace
97% AFUE
Split Air Conditioner
19.0 SEER
Setback
New
1 Central Furnace
97% AFUE
Split Air Conditioner
19.0 SEER
Setback
New
HVAC DISTRIBUTION
Location Heating
Cooling Duct Location
Duct
R-Value Status
FAU-4T Living, Dining, Kitc Ducted
Ducted Attic
4.2
New
FAU-3T Bedroom Wing Ducted
Ducted Attic
4.2
New
FAU-2T Master Suite 1 Ducted
Ducted Attic
4.2
New
WATER HEATING
Qty. Type
Gallons Min. Eff
Distribution Status
1 Indirect Gas
1
0.83
All Pipes Ins
New
1 Indirect Gas
1
0.83
All Pipes Ins
New
EnergyPro 6.5 by Ene Soft User Number.- 5235
RunCode: 2015-07-08T13:09:30
ID:
Pa a 15 of 20
RESIDENTIAL MEASURES SUMMARY
RMS-1
Project Name
Houses #4-6 Cardinal Direction Calculatiot
Building Type m Single Family ❑ Addition Alone
❑ Multi Family ❑ Existing+ Addition/Alteration
Date
71812015
Project Address
The Orchards La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. Floor Area
3,481
Addition
n/a
# of Units
1
INSULATION
Construction Type
Area
Cavity (ft Special Features Status
FENESTRATION I Total Area: 843 Glazing Percentage: 24.2 % New/Altered Average U-Factor: 0.47
Orientation Area ffz U-Fac SHGC Overhang Sidefins Exterior Shades Status
Rear (W) 72.0 0.550
0.20 1.5 none Bug Screen New
HVAC SYSTEMS
Qty. Heating Min. Eff
Cooling Min. Eff Thermostat Status
HVAC DISTRIBUTION
Location Heating
Duct
Cooling Duct Location R-Value Status
WATER -HEATING
Qty. Type Gallons Min. Eff Distribution Status
EnergyPro 6.5 by Ene Soft User Number. 5235
RunCode: 2015-07-08T13:09:30 /D:
Page 16 of 20
2013 Low -Rise Residential Mandatory Measures Summary
NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the
compliance aonroach used. Excentions may annly. Review the resnective code section for mare information_
Building Envelope Measures:
§I10.6(a)1:
Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage.
§I 10.6(a)5:
Fenestration products (except field -fabricated windows) have a label listing the certified U-Factor, certified Solar Heat Gain
Coefficient SHGC , and infiltration that meets the requirements of §10-111 (a).
§110.7:
Exterior doors and windows are weatherstripped; all joints and penetrations are caulked and sealed.
§I 10.8(a):
Insulation specified or installed meets Standards for Insulating Material. Indicate type and include on the CF2R.
§ 110.8(i):
The thermal emittance and aged solar reflectance values of the cool roofing material meets the requirements of § 110.8(i) when the
installation of a cool roof is specified on the CFIR.
§ 110.80):
A radiant barrier shall have an emittance of 0.05 or less when the installation of a radiant barrier is specified on the CFI R.
Minimum R-30 insulation in wood -frame ceiling; or the weighted average U-factor shall not exceed 0.031. Minimum R-19 in a
§ 150.0(a):
rafter roof alteration. Attic access doors shall have permanently attached insulation using adhesive or mechanical fasteners. The
attic access shall be gasketed to prevent air leakage.
§150.0(b):
Loose fill insulation shall conform with manufacturer's installed design labeled R-value.
§150.0(c):
Minimum R-13 insulation in 2x4 inch wood framing wall or have a U-factor of 0.102 or less (R-19 in 2x6 or 0.074 maximum U-
factor).
§ 150.0(d):
Minimum R-19 insulation in raised wood -frame floor or 0.037 maximum U-factor.
§I50.0(g)1:
In Climate Zones 14 and 16 a Class II vapor retarder shall be installed on the conditioned space side of all insulation in all exterior
walls, vented attics and unvented attics with air -permeable insulation.
§ 150.0(g)2:
In Climate Zones 1-16 with unvented crawl spaces the earth floor of the crawl space shall be covered with a Class I or Class II
vapor retarder.
In a building having a controlled ventilation crawl space, a Class I or Class II vapor retarder shall be placed over the earth floor of
§ 150.0(g)3:
the crawl space to reduce moisture entry and protect insulation from condensation, as specified in the exception to Section
150.0(d).
§150.0(1):
Slab edge insulation shall: have a water absorption rate, for the insulation material alone without facings, no greater than 0.3%;
have water vapor permeance rate is no greater than 2.0 perm/inch, be protected from physical damage and UV light deterioration;
and when installed as part of a heated slab floor meets the requirements of § 110.8(g).
150.0 (q)'
Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors shall have a maximum U-
factor of 0.58; or the weighted average U-factor of all fenestration shall not exceed 0.58.
Fireplaces, Decorative Gas Appliances and Gas Log Measures:
§150.0(e)IA:
Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox.
§150.0(e)1B:
Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is
equipped with a readily accessible, operable, and tight -fitting damper or a combustion -air control device.
§ 150.0(e) I C:
Masonry or factory -built fireplaces have a flue damper with a readily accessible control.
§ 150.0(e)2:
Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside
of the building, are prohibited.
Space Conditioning, Water Heating and Plumbing System Measures:
§110.0-§110.3:
HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified to the Energy Commission.
§I 10.3(c)5:
Water heating recirculation loops serving multiple dwelling units meet the air release valve, backflow prevention, pump isolation
valve, and recirculation loop connection requirements of § 110.3(c)5.
Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances (appli-
§110.5:
ances without an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool
ands a heaters.
§I50.0(h)1:
Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA using design conditions specified
in§150.Oh2.
§150.0(h)3A:
Installed air conditioner and heat pump outdoor condensing units shall have a clearance of at least five feet from the outlet of any
dryer vent.
§ 150.0(i):
Heating systems are equipped with thermostats that meet the setback requirements of § 110.2(c).
§150.00)IA:
Storage gas water heaters with an energy factor equal to or less than the federal minimum standards shall be externally wrapped
with insulation having an installed thermal resistance of R-12 or greater.
§ 150.00)113:
Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water -heating systems, have R-12 external
insulation or R-16 internal insulation where the internal insulation R-value is indicated on the exterior of the tank.
For domestic hot water system piping, whether buried or unburied: the first 5 feet of hot and cold water pipes from the storage
tank, all piping with a nominal diameter of 3/4 inch or larger, all piping associated with a domestic hot water recirculation system
§ 150.00)2A:
regardless of the pipe diameter, piping from the heating source to storage tank or between tanks, piping buried below grade, and
all hot water pipes from the heating source to kitchen fixtures must be insulated according to the requirements of TABLE 120.3-
A.
§ 150.00)2B:
All domestic hot water pipes that are buried below grade must be installed in a water proof and non -crushable casing or sleeve
that allows for installation, removal, and replacement of the enclosed pipe and insulation.
2013 Low -Rise Residential Mandatory Measures Summary
§I50.00)2C:
Pipe for cooling system lines shall be insulated as specified in §150.00)2A. Piping insulation for steam and hydronic heating
systems or hot waters stems with pressure > 15 psig shall meet the requirements in TABLE 120.3-A.
§150.00)3:
Insulation is protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
Insulation exposed to weather shall either be rated for outdoor use or installed with a cover suitable for outdoor service. For
§150.00)3A:
example, protected by aluminum, sheet metal, painted canvas, or plastic cover. Cellular foam insulation protected as specified or
painted with coating that is water retardant and provides shielding from solar radiation that degrades the material.
Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space shall have a Class 1
§150.00)3B:
or Class H vapor retarding facing, or the insulation shall be installed at the thickness that qualifies as a Class I or Class II vapor
retarder.
Systems using gas or propane water heaters to serve individual dwelling units shall include: a 120V electrical receptacle within 3
feet of the water heater; a Category III or IV vent, or a Type B vent with straight pipe between the outside termination and the
§150.0(n)1:
space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the installed
water heater, and allows natural draining without pump assistance; and a gas supply line with a capacity of at least 200,000
Btu/hr.
§I50.0(n)2:
Recirculating loops serving multiple dwelling units shall meet the requirements of §I 10.3(c)5.
§ 150.0(n)3:
Solar water -heating systems and collectors shall be certified and rated by the Solar Rating and Certification Corporation (SRCC)
or by a testing agency approved by the Executive Director.
Ducts and Fans Measures:
All air -distribution system ducts and plenums installed are sealed and insulated to meet the requirements of CMC §601.0, §602.0,
§603.0, §604.0, §605.0 and ANSI/SMACNA-006-2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition.
Supply -air and return -air ducts and plenums are insulated to a minimum installed level of R-6.0 (or higher if required by CMC
§605.0) or enclosed entirely in directly conditioned space as confirmed through field verification and diagnostic testing
(RA3.1.4.3.8). Connections of metal ducts and inner core of flexible ducts are mechanically fastened. Openings shall be sealed
§150.0(m)l:
with mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181B or
aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than 'A inch, the
combination of mastic and either mesh or tape shall be used. Building cavities, support platforms for air handlers, and plenums
defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying
conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms
shall not be compressed to cause reductions in the cross -sectional area of the ducts.
Factory -Fabricated Duct Systems shall comply with specified requirements for duct construction, connections, and closures; joints
§150.0(m)2:
and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes unless such tape is
used in combination with mastic and draw bands.
§150.0(m)3-6:
Field -Fabricated Duct Systems shall comply with requirements for: pressure -sensitive tapes, mastics, sealants, and other
requirements specified for duct construction; duct insulation R-value ratings; duct insulation thickness; and duct labeling.
§ 150.0(m)7:
All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or automatic
dampers.
§ 150.0(m)8:
Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers
except combustion inlet and outlet air openings and elevator shaft vents.
Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind but not
§150.0(m)9:
limited to the following: insulation exposed to weather shall be suitable for outdoor service. For example, protected by aluminum,
sheet metal, painted canvas, or plastic cover. Cellular foam insulation shall be protected as above or painted with a coating that is
water retardant and provides shielding from solar radiation.
§150.0(m)]0:
Flexible ducts cannot have porous inner cores.
When space conditioning systems use forced air duct systems to supply conditioned air to an occupiable space, the ducts shall be
§150.0(m)l1:
sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in accordance with Reference
Residential Appendix RA3.
Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal
§ 150.0(m)12:
conditioning component, except evaporative coolers, shall be provided with air filter devices that meet the requirements of
§150.0(m)12.
Space conditioning systems that utilize forced air ducts to supply cooling to an occupiable space shall have a hole for the
placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPP) in the supply plenum. The
§150.0(m)l3:
space conditioning system must also demonstrate airflow> 350 CFM per ton of nominal cooling capacity through the return
grilles, and an air -handling unit fan efficacy < 0.58 W/CFM as confirmed by field verification and diagnostic testing, in
accordance with Reference Residential Appendix RA3.
Zonally controlled central forced air cooling systems shall be capable of simultaneously delivering, in every zonal control mode,
§150.0(m)15:
an airflow from the dwelling, through the air handler fan and delivered to the dwelling, of>_ 350 CFM per ton of nominal cooling
capacity, and operating at an air -handling unit fan efficacy of S 0.58 W/CFM as confirmed by field verification and diagnostic
testing, in accordance with Reference Residential Appendix RA3.
All dwelling units shall meet the requirements of ASHRAE Standard 62.2. Neither window operation nor continuous operation of
§150.0(o):
central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of providing the
Whole Building Ventilation.
§I50.0(o)IA:
Whole Building Ventilation airflow shall be confirmed through field verification and diagnostic testing, in accordance with
Reference Residential Appendix RA3.
Pool and Spa Heating Systems and Equipment Measures:
Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency
§ 110.4(a):
Regulations; an on -off switch mounted outside of the heater that allows shutting off the heater without adjusting the thermostat
setting; a permanent weatherproof plate or card with operating instructions; and shall not use electric resistance heating.
'2013 Low -Rise Residential Mandatory Measures Summary
§ 110.4(b)1:
Any pool or spa heating equipment shall be installed with at least 36 inches of pipe between filter and heater or dedicated suction
and return lines, or built-up connections for future solar heating.
§I 10.4(b)2:
Outdoor pools or spas that have a heat pump or gas heater shall have a cover.
§110.4(b)3:
Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or pro -
rammed to run only during off-peak electric demand periods.
§110.5:
Natural gas pool and spa heaters shall not have a continuous burning pilot light.
§150.0(p):
Residential pool systems or equipment shall meet specified pump sizing, flow rate, piping, filters, and valve requirements.
Lighting Measures:
§110.9:
All lighting control devices and systems, ballasts, and luminaires shall meet the applicable requirements of §110.9.
§150.0(k)iA:
Installed luminaires shall be classified as high -efficacy or low -efficacy for compliance with §150.0(k) in accordance with TABLE
150.0-A or TABLE 150.0-B, as applicable.
§ 150.0(k)1B:
When a high efficacy and low efficacy lighting system are combined in a single luminaire, each system shall separately comply
with the applicable provisions of § 150.0(k).
The wattage and classification of permanently installed luminaires in residential kitchens shall be determined in accordance with
§ 150.0(k) I C:
§ 130.0(c). In residential kitchens, the wattage of electrical boxes finished with a blank cover or where no electrical equipment has
been installed, and where the electrical box can be used for a luminaire or a surface mounted ceiling fan, shall be calculated as 180
watts of low efficacy lighting er electrical box.
§150.0(k)ID:
Ballasts for fluorescent lamps rated 13 watts or greater shall be electronic and shall have an output frequency no less than 20 kHz.
Permanently installed night lights and night lights integral to installed luminaires or exhaust fans shall be rated to consume no
§150.0(k)IE:
more than 5 watts of power per luminaire or exhaust fan as determined in accordance with §130.0(c). Night lights do not need to
be controlled by vacancy sensors.
§150.0(k)1F:
Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods) shall meet the applicable
requirements of §I50.0(k).
§ 150.0(k)2A:
High efficacy luminaires must be switched separately from low efficacy luminaires.
§150.0(k)2B:
Exhaust fans shall be switched separately from lighting systems.
§150.0(k)2C:
Luminaires shall be switched with readily accessible controls that permit the luminaires to be manually switched ON and OFF.
§150.0(k)2D:
Controls and equipment are installed in accordance with manufacturer's instructions.
§ 150.0(k)2E:
No control shall bypass a dimmer or vacancy sensor function if the control is installed to comply with § 150.0(k).
§150.0(k)2F:
Lighting controls comply with applicable requirements of §110.9.
An Energy Management Control System (EMCS) may be used to comply with dimmer requirements if: it functions as a dimmer
§150.0(k)2G:
according to § 110.9; meets Installation Certificate requirements of §130.4; the EMCS requirements of § 130.5; and all other
requirements in §150.0(k)2.
An Energy Management Control System (EMCS) may be used to comply with vacancy sensor requirements of § I50.0(k) if. it
§150.0(k)2H:
functions as a vacancy sensor according to §110.9; meets Installation Certificate requirements of §130.4; the EMCS requirements
of § 130.5; and all other requirements in § 150.0(k)2.
§ I50.0(k)2I:
A multiscene programmable controller may be used to comply with dimmer requirements of this section if it provides the
functionality of a dimmer according to §110.9, and complies with all other applicable requirements in §150.0(k)2.
§ 150.0(k)3A:
A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy.
Kitchen lighting includes all permanently installed lighting in the kitchen except internal lighting in cabinets that illuminate only
§ 150.0(k)3B:
the inside of the cabinets. Lighting in areas adjacent to the kitchen, including but not limited to dining and nook areas, are
considered kitchen lighting if they are not separately switched from kitchen lighting.
§I50.0(k)4:
Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of illuminated
cabinet.
§150.0(k)5:
A minimum of one high efficacy luminaire shall be installed in each bathroom; and all other lighting installed in each bathroom
shall be high efficacy or controlled by vacancy sensors.
§150.0(k)6:
Lighting installed in attached and detached garages, laundry rooms, and utility rooms shall be high efficacy luminaires and
controlled by vacancy sensors.
§ I50.0(k)7:
Lighting installed in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms shall be high
efficacy, or shall be controlled by either dimmers or vacancy sensors.
Luminaires recessed into ceilings shall: be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other
nationally recognized testing/rating laboratory; have a label that certifies that the luminaire is airtight with air leakage less than 2.0
CFM at 75 Pascals when tested in accordance with ASTM E283; be sealed with a gasket or caulk between the luminaire housing
§150.0(k)8:
and ceiling, and shall have all air leak paths between conditioned and unconditioned spaces sealed with a gasket or caulk; and
allow ballast maintenance and replacement without requiring cutting holes in the ceiling.
For recessed compact fluorescent luminaries with ballasts to qualify as high efficacy for compliance with § 150.0(k), the ballasts
shall be certified to the Energy Commission to comply with the applicable requirements in § 110.9.
For single-family residential buildings, outdoor lighting permanently mounted to a residential building or other buildings on the
same lot shall be high efficacy, or may be low efficacy if it meets all of the following requirements:
i. Controlled by a manual ON and OFF switch that does not override to ON the automatic actions of Items ii or iii below; and
§ 150.0(k)9A:
ii. Controlled by a motion sensor not having an override or bypass switch that disables the motion sensor, or controlled by a
motion sensor having a temporary override switch which temporarily bypasses the motion sensing function and automatically
reactivates the motion sensor within 6 hours; and
iii. Controlled by one of the following methods:
2013 Low -Rise Residential Mandatory Measures Summary
a. Photocontrol not having an override or bypass switch that disables the photocontrol; or
b. Astronomical time clock not having an override or bypass switch that disables the astronomical time clock, and which is
programmed to automatically turn the outdoor lighting OFF during daylight hours; or
c. Energy management control system which meets all of the following requirements: At a minimum provides the functionality of
an astronomical time clock in accordance with § 110.9; meets the Installation Certification requirements in § 130.4; meets the
requirements for an EMCS in §130.5; does not have an override or bypass switch that allows the luminaire to be always ON; and,
is programmed to automatically turn the outdoor lighting OFF during daylight hours.
For low-rise multifamily residential buildings, outdoor lighting for private patios, entrances, balconies, and porches; and outdoor
lighting for residential parking lots and residential carports with less than eight vehicles per site shall comply with one of the
§150.0(k)9B:
following requirements:
i. Shall comply with §I50.0(k)9A; or
ii. Shall comply with the applicable requirements in §110.9, §130.0, §130.2, §130.4, §140.7 and §141.0.
§150.0(k)9C:
For low-rise residential buildings with four or more dwelling units, outdoor lighting not regulated by §150.0(k)9B or 150.0(k)9D
shall comply with the applicable requirements in §110.9, §130.0, §130.2, §130.4, §140.7 and §141.0.
§ 150.0(k)9D:
Outdoor lighting for residential parking lots and residential carports with a total of eight or more vehicles per site shall comply
with the applicable requirements in §110.9, §130.0, §130.2, §130.4, §140.7 and §141.0.
§150.0(k)10:
Internally illuminated address signs shall comply with §140.8; or shall consume no more than 5 watts of power as determined
according to § 130.0(c).
§150.0(k)11:
Lighting for residential parking garages for eight or more vehicles shall comply with the applicable requirements for
nonresidential garages in §110.9, §130.0, §130.1, §130.4, §140.6. and §141.0.
In a low-rise multifamily residential building where the total interior common area in a single building equals 20 percent or less of
§150.0(k)12A:
the floor area, permanently installed lighting for the interior common areas in that building shall be high efficacy luminaires or
controlled by an occupant sensor.
In a low-rise multifamily residential building where the total interior common area in a single building equals more than 20
percent of the floor area, permanently installed lighting in that building shall:
§150.0(k)12B:
i. Comply with the applicable requirements in §110.9, §130.0, §130.1, §140.6 and §141.0; and
ii. Lighting installed in corridors and stairwells shall be controlled by occupant sensors that reduce the lighting power in each
space by at least 50 percent. The occupant sensors shall be capable of turning the light fully On and Off from all designed paths of
ingress and egress.
Solar Ready Buildings:
Single family residences located in subdivisions with ten or more single family residences and where.the application for
§I 10.10(a)1:
tentative subdivision map for the residences has been deemed complete, by the enforcement agency, on or after January 1, 2014,
shall comply with the requirements of §I 10.10(b) through §110.10(e).
§110.10(a)2:
Low-rise multi -family buildings shall comply with the requirements of §I 10.10(b) through §110.10(d).
The solar zone shall have a minimum total area as described below. The solar zone shall comply with access, pathway, smoke
ventilation, and spacing requirements as specified in Title 24, Part 9 or other Parts of Title 24 or in any requirements adopted by a
local jurisdiction. The solar zone total area shall be comprised of areas that have no dimension less than 5 feet and are no less than
80 square feet each for buildings with roof areas less than or equal to 10,000 square feet or no less than 160 square feet each for
§ 110.10(b) l :
buildings with roof areas greater than 10,000 square feet.
For single family residences the solar zone shall be located on the roof or overhang of the building and have a total area no less
than 250 square feet. For low-rise multi -family buildings the solar zone shall be located on the roof or overhang of the building or
on the roof or overhang of another structure located within 250 feet of the building or on covered parking installed with the
building project and have a total area no less than 15 percent of the total roof area of the building excluding any skylight area.
§ 110.10(b)2:
All sections of the solar zone located on steep -sloped roofs shall be oriented between 110 degrees and 270 degrees of true north.
§110.10(b)3A:
No obstructions, including but not limited to, vents, chimneys, architectural features, and roof mounted equipment, shall be
located in the solar zone.
Any obstruction, located on the roof or any other part of the building that projects above a solar zone shall be located at least twice
§ 110.10(b)3B:
the distance, measured in the horizontal plane, of the height difference between the highest point of the obstruction and the
horizontal projection of the nearest point of the solar zone, measured in the vertical plane.
§ 110.10(b)4:
For areas of the roof designated as solar zone, the structural design loads for roof dead load and roof live load shall be clearly
indicated on the construction documents.
The construction documents shall indicate: a location for inverters and metering equipment and a pathway for routing of conduit
§ 110.10(c):
from the solar zone to the point of interconnection with the electrical service (for single family residences the point of
interconnection will be the main service panel); a pathway for routing of plumbing from the solar zone to the water -heating
system.
§ 110.10(d):
A copy of the construction documents or a comparable document indicating the information from § 110.10(b) through § 110.10(c)
shall be provided to the occupant.
§ 110.10(e)l:
The main electrical service panel shall have a minimum busbar rating of 200 amps.
The main electrical service panel shall have a reserved space to allow for the installation of a double pole circuit breaker for a
§110.10(e)2:
future solar electric installation. The reserved space shall be: positioned at the opposite (load) end from the input feeder location or
main circuit location, and permanently marked as "For Future Solar Electric".
BUILDING ENERGY ANALYSIS REPORT
PROJECT:
Ho a 7-Cardinal Direction Calculations
The Orchards
La Quinta, CA
Project Designer:
Elemental Architecture
1555 S Palm Canyon Drive, Suite D202
Palm Springs, CA 92264
Report Prepared by:,
Fernando A. Rodrigue
MRC Engineering, IN
34300 Gateway Drive, Su e
�i
Palm Desert, CA 92 11 CD/NO & s QUllV
760. 340.9005 F� PPR AFFT 1' DFP A
R Co ��® T
rF $ TIO/V
e
�auN
Job Number:
JUL 2 8 2015
CITY OF LA QUINTA
• Date: COMMUNITY DEVELOPMENT
7/8/2015
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2013 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC — www.energysoft.com.
EnergyPro 6.5 by EnergySoft User Number: 5235 ID:
41
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD,
Project Name: House #7 Cardinal Direction Calculations Calculation Date/Time: 11 .-02, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis
Input File Name: HOUSE 7.xml
CFI R-PRF-01
Page I of 13
GENERAL INFORMATION
01
Project Name
House #7 Cardinal Direction Calculations
02
Calculation Description
Title 24 Analysis
03
Project Location
The Orchards
04
City
La Quinta
05
Standards Version
Compliance 2015
06
Zip Code
07
Compliance Manager Version
BEMCmpMgr 2013-3c (710)
08
Climate Zone
CZ15
09
Software Version
EnergyPro 6.5
10
Building Type
Single Family.
11
Front Orientation (deg/Cardinal)
Cardinal
12
Project Scope
Newly Constructed
13
Number of Dwelling Units
1
14
Total Cond. Floor Area (ft)
3481.4
15
Number of Zones
3
16
Slab Area (ft2)
3481.4
17
Number of Stories
1
18
Addition Cond. Floor A"rea
N/A
19
Natural Gas Available
Yes
20
Addition Slab Area (ft)
N/A .
21
Glazing Percentage (%)
25.0%
This compliance analysis is valid only for permit applications through July 31, 2015
COMPLIANCE RESULTS 1 Frr '+b`t. C. l 4 ; IL Wlk 11 = , 1E k c
01
Building Complies with Computer Performance
02
This building incorporates features that require field testing and/o'verification by "a certified HERS rater unifier the supervision of a CEC-approved HERS provider.
03
This building incorporates one or more Special Features shown below
Registration Number: 215-No186367A-000000000-0000 Registration Date/Time: 2015-07-08 11:56:33 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CFIR-07082015-710 Report Generated at: 2015-07-08 11:06:11
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: House #7 Cardinal Direction Calculations Calculation Date/Time: 11:02, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis
Input File Name: HOUSE 7.xml
CFI R-PRF-01 -
Page 2 of 13
ENERGY USE SUMMARY
Energy Use
Standard
Proposed
Compliance
Percent
(kTDV/ft2-yr)
Design
Design
Margin
Improvement
Space Heating
2.01
3.38
-1.37
-68.2%
Space Cooling
80.66
69.02
11.64
14.4%
IAQ Ventilation
1.02
1.02
0.00
0.0%
Water Heating
7.37
5.31
2.06
28.0%
PV Credit
----
0.00
0.00
----
North Facing Compliance Total
91.06
78.73
12.33
13.5%
Space Heating
2.01
3.53
-1.52
-75.6%
Space Cooling
80.66
72.92
7.74
9.6%
IAQ Ventilation
1.02
1.02
0.00
0.0%
Water Heating
7.37
5.31
2.06
28.0%
PV Credit
0.00
0.00
----
East Facing Compliance Total
91.06
82.78
8.28
9.1%
Space Heating
2.01
5.02
-3.01
-149.8%
Space Cooling
80.66+: ?
I 4 z
73 42
7.24
9.0%
IAQ Ventilation
# j
1 02
02
�.;
{
0.00
0.0%
Water Heating
,,y
_
737, t
, �. t'
r 531
I.k aJ
��,_ i
2.06
28.0%
^
/
PV Credit
tt
0 00
G
�t
0.00
South Facing Compliance Total
01.06
84.77
;
h
6.29
6.9%
Space Heating
2.01
4.71
-2.70
-134.3%
Space Cooling
80.66
68.93.
11.73
14.5%
IAQ Ventilation
1.02
1.02
0.00
0.0%
Water Heating
7.37
5.31
2.06
28.0%
PV Credit
----
0.00
0.00
----
West Facing Compliance Total
91.06
79.97
11.09
12.2%
Registration Number: 215-N0186367A-000000000-0000
CA Building Energy Efficiency Standards - 2013 Residential Compliance
Registration Date/Time: 2015-07-08 11:56:33
Report Version - CF111-07082015-710
HERS Provider: CaICERTS inc.
Report Generated at: 2015-07-0811:06:11
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: House #7 Cardinal Direction Calculations Calculation Date/Time: 11:02, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSE 7.xml
REQUIRED SPECIAL FEATURES
The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis:
• Cool roof
• Ceiling has high level of insulation
• Window overhangs and/or fins
CF1 R-PRF-01
Page 3 of 13
HERS FEATURE SUMMARY
The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is
provided in the building components tables below.
Building -level Verifications:
• IAQ mechanical ventilation
Cooling System Verifications:
• Minimum Airflow
• Verified SEER 3.
• Refrigerant Charge {
• Fan Efficacy Watts/CFM'
HVAC Distribution System Verifications: l
• Duct Sealing
Domestic Hot Water System Verifications;.. '
• None
ENERGY DESIGN RATING fl. �4 V
,s�.ea h._ ..S rhv-'yi• ti
This is the sum of the annual TDV energy con sumption :for.energy use components mcliided in the performance compliance approach for the Standard Design Building (Energy Budget) and the annual
TDV energy consumption for lighting and components not'regulated by.,Title 24; Part-6 (such as dom_estic`appl,iances'and consumer, electronics) and accounting for the annual TDV energy offset by an
on -site renewable energy system. k V I .1'.;' t ' V t' ..i X: 9
Reference Energy Use
Energy Design Rating
Margin
Percent Improvement
Total Energy (kTDV/f2-yr)*
131.19
124:90
6.29
4.8%
includes calculated Appliances and Miscellaneous Energy Use (AMEU)
BUILDING - FEATURES INFORMATION
01
02
03
04
05
06
07
Number of Dwelling
Number of Ventilation
Number of Water
Project Name
Conditioned Floor Area (f:2)
Units
Number of Bedrooms
Number of Zones
Cooling Systems
Heating Systems
House #7 Cardinal Direction
3481.4 .
1
5
3
0
2
Calculations
Registration Number: 215-No186367A-000000000-0000 Registration Date/Time: 2015-07-08 11:56:33 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-08 11:06:11
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: House #7 Cardinal Direction Calculations Calculation Date/Time: 11:02, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSE 7.xml
CF1 R-PRF-01 -
Page 4 of 13
ZONE INFORMATION
01
02
03
04
05
06
07
Zone Name
Zone Type
HVAC System Name
Zone Floor Area
(ft2)
Avg. Ceiling
Height
Water Heating System 1
Water Heating System 2
Living, Dining, Kitchen,
Conditioned
FAU-4T Living, Dining, Kit
1766
12.7554
DHW Sys 1
Bedroom Wing
Conditioned
FAU-3T Bedroom Wing2
1110.4
8.5
DHW Sys 3
Master Suite 1
Conditioned
FAU-2T Master Suite 13
605
8.5
DHW Sys 3
Registration Number: 215-No186367A-000000000-0000 Registration Date/Time: 2015-07-08 11:56:33 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-0811:06:11
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: House #7 Cardinal Direction Calculations Calculation Date/Time: 11:02, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSE 7.xml
CF1 R-PRF-01
Page 5.of 13
OPAQUE SURFACES
01
02
03
04
05
06
07
08
Name
Zone
Construction
Azimuth
Orientation
Gross Area (ft2)
Window & Door Area (ft)
Tilt (deg)
N-Wall
Living, Dining, Kitchen,
R-21 Wall
0
Left
475.3
216
90
S-Wall
Living, Dining, Kitchen,
R-21 Wall
180
Right
747.5
12
90
W-Wall
Living, Dining, Kitchen,
R-21 Wall
270
Front
129.5
36.5924
90
E-Wall
Living, Dining, Kitchen,
R-21 Wall
90
Back
193.5
152.908
90
N-Wall 2
Living, Dining, Kitchen,
R-21 Wall
0
Left
127.5
30
90
Roof
Living, Dining, Kitchen,
R-60 Roof Attic
1670
Roof 2
Living, Dining, Kitchen,
R-60 Roof Attic
96
N-Wall 3
Bedroom Wing
R-21 Wall
0
Left
250.8
90
W-Wall 2
Bedroom Wing
R-21 Wall
270
Front
39.7
10
90
S-Wall 2
Bedroom Wing
R-21 Wall
180
Right
63.8
90
E-Wall 2
Bedroom Wing
R-21 Wall
90
Back
136
72
90
E-Wall 3
, Bedroom Wing, µ ,YC
R-21 Wall
90
Back
144.5
74
90
N-Wall4
Bedroom Wing ''
t s°
v�1,R='21$1NaliI l t:-
�' da d
''13, �D~
�.
Left
Left
144.5
74
90
W-Wall3
1 Bedroon:Wng
R-21 Wall` "M'-i
q L�27,,
d.:
Front
141.7
90
S-Wall 3
Bedroom Wng '° "
' . '' R 21 1NallW U
f 180
'Right '-
191.3
90
W-Wall 4
r' Bedroom Wng
; R=21 Wall--'
J 270 1i
L Front ^
; 133.2
67.8748
90
Roof 3
Bedroom Wing
R-60 Roof Attic
460
Roof 4
Bedroom Wing
R-60 Roof Attic
265
Roof 5
Bedroom Wing
R-60 Roof Attic
300.4
Roof 6
Bedroom Wing
R-60 Roof Attic
85
N-Wall 5
Master Suite 1
R-21 Wall
0
Left
160.1
42
90
E-Wall 4
Master Suite 1
R-21 Wall
90
Back
171.4
72
90
S-Wall 4
Master Suite 1
R-21 Wall
180
Right
287.6
12
90
Roof 7
Master Suite 1
R-60 Roof Attic
605
Registration Number: 215-No186367A-000000000-0000 Registration Date/Time: 2015-07-08 11:56:33
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710
HERS Provider: CaICERTS inc.
Report Generated at: 2015-07-0811:06:11
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: House #7 Cardinal Direction Calculations Calculation Date/Time: 11:02, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSE 7.xml
CF1R-PRF-01 -
Page 6 of 13
ATTIC
01
02
03 .
04
05
06
07
08
Name
Construction
Type
Roof Rise
Roof Reflectance
Roof Emittance
Radiant Barrier
Cool Roof
Attic Living, Dining, Kitchen,
Attic RoofLiving, Dining,
Kitchen,
Unventilated
0
0.77
0.87
Yes
Yes
Attic Bedroom Wing
Attic RoofBedroom Wing
Unventilated
0
0.77
0.87
Yes
Yes
Attic Master.Suite 1
Attic RoofMaster Suite 1
Unventilated
0
0.77
0.87
Yes
Yes
E7��'a, F �% f"��
fi.
r��1 E 7,
Registration Number: 215-No1e6367A-000000000-0000 Registration Date/Time: 2015-07-06 11:56:33 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF111-07082015-710 Report Generated at: 2015-07-0811:06:11
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: House #7 Cardinal Direction Calculations
Calculation Description: Title 24 Analysis
Calculation Date/Time: 11:02, Wed, Jul 08, 2015
Input File Name: HOUSE 7.xml
CFI R-PRF-01
Page 7 of 13
WINDOWS
01
02
03
04
05
06
07
08
09
10
Name
Type
Surface (Orientation -Azimuth)
Width (ft)
Height (ft)
Multipli
er
Area
(ft2)
U-factor
SHGC
Exterior Shading
C
Window
N-Wall.(Left-0)
9.0
4.0
1
36.0
0.38
0.25
Insect Screen (default)
C 2
Window
N-Wall (Left-0)
9.0
.4.0
1
36.0
0.38
0.25
Insect Screen (default)
06
Window
N-Wall (Left-0)
9.0
8.0
1
72.0
0.55
0.20
Insect Screen (default)
07
Window
N-Wall (Left-0)
9.0
8.0
1
72.0
0.55
0.20
Insect Screen (default)
G
Window
S-Wall (Right-180)
6.0
2.0
1
12.0
0.38
0.25
Insect Screen (default)
F
Window
W-Wall (Front-270)
2.8
11.8
1.093
36.6
0.56
0.24
Insect Screen (default)
A
Window
E-Wall (Back-90)
5.0
2.5
1
12.5
0.38
0.25
Insect Screen (default)
B
Window
E-Wall (Back-90)
8.0
4.0
1
32.0
0.38
0.25
Insect Screen (default)
J
Window
E-Wall (Back-90)
2.3
7.0
1.006
16.4
0.38
0.25
Insect Screen (default)
K
Window
E-Wall (Back-90)
4.0
7.0
1
28.0
0.38
0.25
Insect Screen (default)
08
Window
E-Wall (Back-90)
8.0
8.0
1
64.0
0.42
0.23
Insect Screen (default)
I
Window
T N Wall,2 (Left-0)fj, i i
55:0-
2.0
1
10.0
0.38
0.25
Insect Screen (default)
12
Window
N-Wall 2 (Left20)1 [ f.; J,Itf
50 y
2.0
1�10.0
0.38
0.25
Insect Screen (default)
13
Window
N-Wall•2 (Left-d)U."
5:0 �
2:0
110:0
0.38
0.25
Insect Screen (default)
E
Window
W-Wall,2.(Front=2704
2 5'+�,
`4 0
�
10.0
0.38
0.25
Insect Screen (default)
10
Window
E-Wall 2 (Back-90)
9.0
8.0
1
72.0
0.55
0.20
Insect Screen (default)
14
Window
E-Wall 3 (Back-90)
5.0
2.0
1
10.0
0.38
0.25
Insect Screen (default)
09
Window
E-Wall 3 (Back-90)
8.0
N.
8.0
1
64.0
0.42
0.23
Insect Screen (default)
15
Window
N-Wall 4 (Left-0)
5.0
2.0
1
10.0
0.38
0.25
Insect Screen (default)
12
Window
N-Wall 4 (Left-0)
8.0
8.0
1
64.0
0.42
0.23
Insect Screen (default)
D
Window
W-Wall 4 (Front-270)
6.5
2.0
0.869
11.3
0.38
0.25
Insect Screen (default)
D 2
Window
W-Wall 4 (Front-270)
6.5
2.0
0.869
11.3
0.38
0.25
Insect Screen (default)
01
Window
W-Wall 4 (Front-270)
5.7
8.0
0.993
45.3
0.38
0.25
Insect Screen (default)
H
Window
N-Wall 5 (Left-0)
6.0
7.0
1 1
42.0 1
0.38
0.25
Insect Screen (default)
05
Window
E-Wall 4 (Back-90)
9.0
8.0
1
72.0
0.55
0.20
Insect Screen (default)
G 2
Window
S-Wall 4 (Right-180)
6.0
2.0
1
12.0 1
0.38
0.25
Insect Screen (default)
Registration Number: 215-No186367A-000006000-0000 Registration Date/Time: 2015-07-08 11:56:33 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF111-07082015-710 Report Generated at: 2015-07-0811:06:11
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: House #7 Cardinal Direction Calculations Calculation Date/Time: 11:02, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis
Input File Name: HOUSE 7.xml
CF1 R-PRF-01
Page 8 of 13
OVERHANGS AND FINS
01
02
03
04
05
06
07
08
09
10
11
12
13
14
Overhang
Left Fin
Right Fin
Window
Depth
Dist Up
Left
Extent
Right
Extent
Flap Ht.
Depth
Top Up
DistL
Bot Up
Depth
Top Up
Dist R
Bot Up
C
4
0.1
4
4
0
0
0
0
0
0
0
0
0
C2
4
0.1
4
4
0
0
0
0
0
0
0
0
0
06
4
0.1
4
4
0
0
0
0
0
0
0
0
0
07
4
0.1
4
4
0
0
0
0
0
0
0
0
0
G
0
0
0
0
0
0
0
0
0
0
0
0
0
F
1.5
0.1
1.5
1.5
0
0
0
0
0
0
0
0
0
A
4
0.1
4
4
0
0
0
0,
0
0
0
0
0
B
4 ,1
0.1
4
4
0
0
0
0
0
0
0
0
0
1
4'
0.1
4
4
0
0
0
0
0
0
0
0
0
K
4,
0:1
4s
4
0
0
0
0
0
0
0
0
0
08
4
0.1
4
4 �
..a 0.
,:�,�0�
OnI
0
0
0
0
0
0
1
3 1
dt 0.1
3 C" ,�
3
; L' 0 +' `
0 `-
01
r 0;r` '
0
0
0
0
0
12
! „j 3
y 10.1 1
3"
r 53'e
!�r
�+�-SOJ
�JJ
4i 0
tl1 Sr;
0 11 #.F
,� 0�
"i 0
0
0
0
0
13
3
'^ Q�1
Lj.3 r:
i17�, 3 C
r0 IL-
4,,-_0 % i
"t 0,4-\
�� 0
0
0
0
0
0
E
1.5
0.1
1.5 `"
•1.5-
-0 _0
0"`
- 0`
0
0
0
0
0
10
0
0
0
0
0
0
0
0
0
0
0
0
0
14
1.5
0.1
1.5
1.5
0
0
0
0
0
0
0
0
0
09
1.5
0.1
1.5
1.5
0
0
0
0
0
0
0
0
0
15
0
0
0
0
0
0
0
0
0
0
0
0
0
12
0
0
0
0
0
0
0
0
0
0
0
0
0
D
5.5
0.1
5.5
5.5
0
0
0
0
0
0
0
0
0
D 2
5.5
0.1
5.5
5.5
0
0
0
0
0
0
0
0
0
01
5.5
0.1
5.5
5.5
0
0
0
0
0
0
0
0
0
H
0
0
0
0
0
0
0
0
0
0
0
0
0
05
3
0.1
3
3
0
0
0
0
0
0
0
0
0
G2
0
0
0 1
0
0
0
0
0
0
0
0
0
0
Registration Number: 215-N0186367A-000000000-0000
CA Building Energy Efficiency Standards - 2013 Residential Compliance
Registration Date/Time: 2015-07-0811:56:33
Report Version - CF111-07082015-710
HERS Provider: CaICERTS inc.
Report Generated at: 2015-07-0811:06:11
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: House #7 Cardinal Direction Calculations Calculation Date/Time: 11:02, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSE 7.xml
CF1 R-PRF-01
Page 9 of 13
OPAQUE SURFACE CONSTRUCTIONS
01
02
03
04
05
06
07
Total Cavity
Winter Design
Construction Name
Surface Type
Construction Type
Framing
R-value
U-value
Assembly Layers
• Cavity / Frame: no insul. / 2x4 Top Child
Attic RoofLiving, Dining,
2x4 Top Chord of Roof Truss @ 24
Roof Deck: Wood Siding/sheathing/decking
Kitchen,
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.644
Roofing. Light Roof (Asphalt Shingle)
• Inside Finish: Gypsum Board
Ceilings (below
Cavity/Frame: R-9.1 /2x4
R-60 Roof Attic
attic)
Wood Framed Ceiling
2x4 @ 24 in. O.C.
R 60
0.016
Over Floor Joists: R-50.9 insul.
• Inside Finish: Gypsum Board
• Cavity / Frame: R-21 / 2x6
• Exterior Finish: Wood
R-21 Wall
Exterior Walls
Wood Framed Wall
2x6 @ 16 in. O.C.
R 21
0.066
Siding/sheathing/decking
• Cavity / Frame: no insul. / 2x4 Top Chrd
2x4 Top Chord of Roof Truss @ 24
Roof Deck: Wood Siding/sheathing/decking
Attic RoofBedroom Wing
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.644
Roofing: Light Roof (Asphalt Shingle)
• Cavity / Frame: no insul. / 2x4 Top Chrd
-
2x4 Top Chord of Roof Truss @ 24
Roof Deck: Wood Siding/sheathing/decking
Attic RoofMaster Suite 1
Attic Roofs
Wood Framed'Ceiling
r t rirn. O.C" a � +
„y none
0.644
Roofing. Light Roof (Asphalt Shingle)
SLAB FLOORS F `°� h.l U 'I , 1-,
01
' 02�
03
`I404 "--
a 05
06
07
Name
Zone
Area (ft) •
Perimeter (ft) _
Edge Insul. R-value & Depth
Carpeted Fraction
Heated
Slab -on -Grade
Living, Dining, Kitchen,
1670
0.1
None
0.8
No
Slab -on -Grade 2
Living, Dining, Kitchen,
96
0.1
None
0.8
No
Slab -on -Grade 3
Bedroom Wing
460
0.1
None
0.8
No
Slab -on -Grade 4
Bedroom Wing
265
0.1
None
0.8
No
Slab -on -Grade 5
Bedroom Wing
300.4
0.1
None
0.8
No
Slab -on -Grade 6
Bedroom Wing
85
0.1
None
0.8
No
Slab -on -Grade 7
Master Suite 1
605
0.1
None
0.8
No
BUILDING ENVELOPE - HERS VERIFICATION
01
02
03
04
Quality Insulation Installation (QII)
Quality Installation of Spray Foam Insulation
Building Envelope Air Leakage
ACH @ 50 Pa
Not Required
. Not Required
Not Required
---
Registration Number: 215-No186367A-000000000-0000 Registration Date/Time: 2015-07-08 11:56:33 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-08 11:06:11
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: House #7 Cardinal Direction Calculations Calculation Date/Time: 11:02, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSE 7.xml
CFI R-PRF-01
Page 10 of 13
WATER HEATING SYSTEMS
01
02
03
04
05
06
Name
System Type
Distribution Type
Water Heater
Number of Heaters
Solar Fraction (%)
DHW Sys 1 - 1/1
DHW
Pipe Insulation, All Lines
DHW Heater 1
1
.0%
DHW Sys 3 - 111
DHW
Pipe Insulation, All Lines
DHW Heater 3
1
.0%
WATER HEATERS
01
02
03
04
05
06
07
08
Name
Heater Element Type
Tank Type
Tank Volume
(gal)
Energy Factor or
Efficiency
Input Rating
Tank Exterior
Insulation
R-value
Standby Loss
(Fraction)
DHW Heater 1
Natural Gas
Indirect
0.5
0.83
180000-Btu/hr
12
0
DHW Heater 3
Natural Gas
Indirect
0.5
0.83
180000-Btu/hr
12
0
WATER HEATING - HERS VERIFICATION .'
01
02._, -
03
04
05
06
07
i
r
Recirculation
Central DHW
Name
Pipe Insulation
.�
�`r Parallel Piping (
s Compact Distribution
t Poiht-of Use
Control
Distribution
DHW Sys 1 - 1/1--
s
---
---
DHW Sys 3 - 1/1
SPACE CONDITIONING SYSTEMS
01
02
03
04
05
06
SC Sys Name
System Type
Heating Unit Name
Cooling Unit Name
Fan Name
Distribution Name
FAU-4T Living, Dining, Kit
Other Heating and Cooling
System
Heating Component 1
Cooling Component 1
HVAC Fan 1
Air Distribution System 1
FAU-3T Bedroom Wing2
Other Heating and Cooling System
Heating Component 2
Cooling Component 2
HVAC Fan 2
Air Distribution System 2
FAU-2T Master Suite 13
Other Heating and Cooling
System
Heating Component 3
Cooling Component 3
HVAC Fan 3
Air Distribution System 3
Registration Number: 215-No166367A-000000000-0000 Registration Date/Time: 2015-07-08 11:56:33 HERS Provider: CaiCERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF111-07082015-710 Report Generated at: 2015-07-0811:06:11
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD CF1R-PRF-01
Project Name: House #7 Cardinal Direction Calculations Calculation Date/Time: 11:02, Wed, Jul 08, 2015 Page 11 of 13
Calculation Description: Title 24 Analysis Input File Name: HOUSE 7.xml
HVAC - HEATING UNIT TYPES
01
02
03
Name
Type
Efficiency
Heating Component 1
CntrlFurnace - Fuel -fired central furnace
97.3 AFUE
Heating Component 2
CntrlFurnace - Fuel -fired central furnace
97.4 AFUE
Heating Component 3
CntrlFurnace - Fuel -fired central furnace
97.4 AFUE
HVAC - COOLING UNIT TYPES
01
02
03
04
05
06
07
Efficiency
Multi -speed
Name
System Type
EER SEER
Zonally Controlled
Compressor
HERS Verification
Cooling Component 1
SplitAirCond
13
18
Not Zonal
Multi -speed
Cooling Component
1-hers-cool
Cooling Component 2
SplitAirCond
13
19
Not Zonal
Multi -speed
Cooling Component
1-hers-cool
Cooling Component 3
, SplitAirCond j r,
m 13
19
Not Zonal
Multi -speed
Cooling Component
1-hers-cool
HVAC COOLING -HERS VERIFICATION J
M.
I: �.k
01
02: n
ar^ 03
04 °w.
4 .. OS
06
Name
k 1
Verified Airflow
# �.+ .. # * N.
Airflow Target
4° t
Verified EER
Verified SEER
Verified Refrigerant
Charge
Cooling Component 1-hers-cool
Required
350
Not Required
Required
Required
Cooling Component 2-hers-cool
Required
350
Not Required
Required
Required
Cooling Component 3-hers-cool
Required
350
Not Required.
Required
Required
HVAC - DISTRIBUTION SYSTEMS
01
02
03
04
05-
06
07
Name
Type
Duct Leakage
Insulation R-value
Duct Location
Bypass Duct
HERS Verification
Air Distribution System 1
DuctsAttic
Sealed and tested
4.2
Attic
None
Air Distribution System
1-hers-dist
Air Distribution System 2
DuctsAttic
Sealed and tested'
4.2
Attic
None
Air Distribution System
2-hers-dist
Air Distribution System 3
DuctsAttic
Sealed and tested
4.2
Attic
None
Air Distribution System
3-hers-dist
Registration Number: 215-No186367A-000000000-0000 Registration Date/Time: 2015-07-08 11:56:33 HERS Provider: CaiCERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CFiR-07082015-710 Report Generated at: 2015-07-08 11:06:11
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: House #7 Cardinal Direction Calculations . Calculation Date/Time: 11:02, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis
Input File Name: HOUSE 7.xml
CFI R-PRF-01
Page 12 of 13
HVAC DISTRIBUTION - HERS VERIFICATION
01
02
03
04
05
06
07
08
Name
Duct Leakage
Verification
Duct Leakage
Target (%)
Verified Duct
Location
Verified Duct
Design
Buried
Ducts
Deeply Buried
Ducts
Low -leakage
Air Handler
Air Distribution System 1-hers-dist
Required
6.0
Not Required
Not Required
Not Required
Not Required
-
Air Distribution System 2-hers-dist
Required
6.0
Not Required
Not Required
Not Required
Not Required
Air Distribution System 3-hers-dist
Required
6.0
Not Required
Not Required
Not Required
Not Required
HVAC - FAN SYSTEMS
01
02
03
04
Name
Type
Fan Power (Watts/CFM)
HERS Verification
HVAC Fan 1
Single Speed PSC Furnace Fan
0.58
HVAC Fan 1-hers-fan
HVAC Fan 2
Single Speed PSC Furnace Fan
0.58
HVAC Fan 2-hers-fan
HVAC Fan 3
Single Speed PSC Furnace Fan
0.58
HVAC Fan 3-hers-fan
-..
HVAC FAN SYSTEMS - HERS VERIFICATIONLJ
01
y.,—�'eW,,trye
F - II # 02 �.'-� N
A7,
03
Name
Verified Fan Watt Draw,, 11 If I I kit
Required Fan Efficiency (Watts/CFM)
HVAC Fan 1-hers-fan
A e 0— t- w Required % % A �x r - �
0.58
HVAC Fan 2-hers-fan
"' x r ' Required "{ y a'^'` "`
0.58
HVAC Fan 3-hers-fan
Required
0.58
IAQ (Indoor Air Quality) FANS
01
02
03
04
05
06
Dwelling Unit
IAQ CFM
IAQ Watts/CFM
IAQ Fan Type
IAQ Recovery
Effectiveness(%)
HERS Verification
SFam IAQVentRpt
79.814
0.25
Default
0
Required
Registration Number: 215-No186367A-000000000-0000 Registration Date/Time: 2015-07-08 11:56:33 HERS Provider: CaiCERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-0811:06:11
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: House #7 Cardinal Direction Calculations Calculation Date/Time: 11:02, Wed, Jul 08, 2015
Calculation Description: Title 24 Analysis Input File Name: HOUSE 7.xml
CF1 R-PRF-01
Page 13 of 13
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
Documentation Author Signature:
Fernando Rodriguez
Company:
Signature Date:
MRC Engineering, Inc.
2015-07-08 11:56:33
Address:
CEA/HERS Certification Identification (If applicable):
34300 Gateway Drive, Suite 120
City/State/Zip:
Phone:
Palm Desert, CA 92211
760-340-9005
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California: , a
1. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance.
2. 1 certify that the energy features and performance specifications
identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
3. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications submittedd to -the enforcemer t agency,for approval,with lhis.building permit application.
Responsible Designer Name:
6
If
Responsible Designer SignatureL:
Crira'r��Gsvie¢
Fernando Rodriguez ��
.
Company: '�, '.
Date,Signed:
V E
MRC Engineering, Inc.
2015-07-08 11:56:33
Address:
License:
34300 Gateway Drive, Suite 120
Randall V. Moss E.13453
City/State/Zip:
-
Phone:
Palm Desert, CA 92211
760-340-9005
Digitally signed by Ca10ERTS. This digital signature is provided in order to secure the content of this. registered document, and in no way implies Registration Provider responsibility for the accuracy of the
information.
Registration Number: 215-NO186367A-000000000-0000 Registration Date/Time: 2015-07-08 11:56:33 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-07082015-710 Report Generated at: 2015-07-08 11:06:11
TABLE OF CONTENTS
Cover Page 1
Table of Contents- 2
Form CF-1 R-PRF-01-E Certificate of Compliance F 3
Form RMS-1 Residential Measures Summary 16
Form MF-1 R Mandatory Measures Summary y • " 18
RESIDENTIAL MEASURES SUMMARY
RMS-1
Project Name
House #7 Cardinal Direction Calculations
Building Type m Single Family ❑ Addition Alone
❑ Multi Family ❑ Existing+ Addition/Alteration
Date
71812015
Project Address
The Orchards La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. Floor Area
3,481
Addition
n/a
# of Units
1
INSULATION
Construction Type
Area
Cavity' ftz
Special Features Status
Slab Unheated Slab -on -Grade
- no insulation 3,481
Perim = 0'
New
Roof Wood Framed Attic
R 60 3,481
Cool Roof
New
Wall Wood Framed
R 21 2,667
New
Demising Wood Framed
R 23 358
New
FENESTRATION
Orientation Area(ft2)
I Total Area: 871 Glazing Percentage: 25.0
U-Fac SHGC Overhang Sidefins
New/Altered Average U-Factor: 0.45
Exterior Shades Status
Left (N) 72.0
0.380
0.25 4.0
none
Bug Screen New
Left (N) 144.0
0.550
0.20 4.0
none
Bug Screen
New
Right (S) 24.0
0.380
0.25 none
none
Bug Screen
New
Front (lM 36.6
0.560
0.24 1.5
none
Bug Screen
New
Rear (E) 88.9
0.380
0.25 4.0
none
Bug Screen
New
Rear (E) 64.0
0.420
0.23 4.0
none
Bug Screen
New
Left (N) 30.0
0.380
0.25 3.0
none
Bug Screen
New
Front (lM 10.0
0.380
0.25 1.5
none
Bug Screen
New
Rear (E) 72.0
0.550
0.20 none
none
Bug Screen
New
Rear (E) 10.0
0.380
0.25 1.5
none
Bug Screen
New
Rear (E) 64.0
0.420
0.23 1.5
none
Bug Screen
New
Left (N) 52.0
0.380
0.25 none
none
Bug Screen
New
Left (N) 64.0
0.420
0.23 none
none
Bug Screen New
Front (W) 67.9
0.380
0.25 5.5
none
Bug Screen
New
HVAC SYSTEMS
Qty. Heating
Min. Eff
Cooling
Min. Eff
Thermostat Status
1 Central Furnace
97% AFUE
Split Air Conditioner
18.0 SEER
Setback
New
1 Central Furnace
97% AFUE
Split Air Conditioner
19.0 SEER
Setback
New
1 Central Furnace
97% AFUE
Split Air Conditioner
19.0 SEER
Setback
New
HVAC DISTRIBUTION
Location Heating
Cooling Duct Location
Duct
R-Value Status
FAU-4T Living, Dining, Kitc Ducted
Ducted Attic
4.2
New
FAU-3T Bedroom Wing Ducted
Ducted Attic
4.2
New
FAU-2T Master Suite 1 Ducted
Ducted Attic
4.2
New
WATER HEATING
Qty. Type
Gallons Min. Eff
Distribution Status
1 Indirect Gas
1
0.83
All Pipes Ins
New
1 Indirect Gas
1
0.83
All Pipes Ins
New
Ene Pro 6.5 by EnergySoft User Number- 5235
RunCode: 2015-07-OBT12.31:05
ID:
Page 16 of 21
RESIDENTIAL MEASURES SUMMARY
RMS-1
Project Name
House #7 Cardinal Direction Calculations
Building Type m Single Family ❑ Addition Alone
❑ Multi Family ❑ Existing+ Addition/Alteration
Date
7/8/2015
Project Address
The Orchards La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. Floor Area
3,481
Addition
Na
# of Units
1
INSULATION
Construction Type
Area
Cavity ft) Special Features Status
FENESTRATION I Total Area: 871 Glazing Percentage: 25.0 % New/Altered Average U-Factor: 0.45
Orientation Area ft2 U-Fac SHGC Overhang Sidefins Exterior Shades Status
Rear (E) 72.0 0.550
0.20 3.0 none Bug Screen New
HVAC SYSTEMS
Qty. Heating Min. Eff
Cooling Min. Eff Thermostat Status
HVAC DISTRIBUTION
Location Heating
Duct
Cooling Duct Location R-Value Status
WATER HEATING
Qty. Type Gallons Min. Eff Distribution Status
EnemyPro 6.5 by Enemysoft User Number. 5235
RunCode: 2015-07-08T12:31:05 ID:
Page 17 of 21
` 2013 Low -Rise Residential Mandatory Measures Summary
NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the
compliance approach used. Exceptions may apply. Review the respective code section for more information.
Building Envelope Measures:
§I 10.6(a)1:
Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage.
§I 10.6(a)5:
Fenestration products (except field -fabricated windows) have a label listing the certified U-Factor, certified Solar Heat Gain
Coefficient SHGC , and infiltration that meets the requirements of §10-111(a).
§110.7:
Exterior doors and windows are weatherstripped; all joints and penetrations are caulked and sealed.
§ 110.8(a):
Insulation specified or installed meets Standards for Insulating Material. Indicate type and include on the CF2R.
§ 110.8(i):
The thermal emittance and aged solar reflectance values of the cool roofing material meets the requirements of § 110.8(i) when the
installation of a cool roof is specified on the CF1R.
§ 110.80):
A radiant barrier shall have an emittance of 0.05 or less when the installation of a radiant barrier is specified on the CFI R.
Minimum R-30 insulation in wood -frame ceiling; or the weighted average U-factor shall not exceed 0.031. Minimum R-19 in a
§ 150.0(a):
rafter roof alteration. Attic access doors shall have permanently attached insulation using adhesive or mechanical fasteners. The
attic access shall be gasketed to prevent air leakage.
§150.0(b):
Loose fill insulation shall conform with manufacturer's installed design labeled R-value.
§ 150.0(c):
Minimum R-13 insulation in 2x4 inch wood framing wall or have a U-factor of 0.102 or less (R-19 in 2x6 or 0.074 maximum U-
factor).
§ 150.0(d):
Minimum R-19 insulation in raised wood -frame floor or 0.037 maximum U-factor.
§150.0(g)l:
In Climate Zones 14 and 16 a Class II vapor retarder shall be installed on the conditioned space side of all insulation in all exterior
walls, vented attics and unvented attics with air -permeable insulation.
§ 150.0(g)2:
In Climate Zones 1-16 with unvented crawl spaces the earth floor of the crawl space shall be covered with a Class I or Class II
vapor retarder.
In a building having a controlled ventilation crawl space, a Class I or Class II vapor retarder shall be placed over the earth floor of
§ 150.0(g)3:
the crawl space to reduce moisture entry and protect insulation from condensation, as specified in the exception to Section
150.0(d).
§ 150.0(1):
Slab edge insulation shall: have a water absorption rate, for the insulation material alone without facings, no greater than 0.3%;
have water vapor permeance rate is no greater than 2.0 perm/inch, be protected from physical damage and UV light deterioration;
and when installed as part of a heated slab floor meets the requirements of § 110.8(g).
150.0 (q)'
Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors shall have a maximum U-
factor of 0.58; or the weighted average U-factor of all fenestration shall not exceed 0.58.
Fireplaces, Decorative Gas Appliances and Gas Log Measures:
§ 150.0(e)1 A:
Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox.
§150.0(e)1B:
Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is
equipped with a readily accessible, operable, and tight -fitting damper or a combustion -air control device.
§150.0(e)1C:
Masonry or factory -built fireplaces have a flue damper with a readily accessible control.
§150.0(e)2:
Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside
of the building, are prohibited.
Space Conditioning, Water Heating and Plumbing System Measures:
§110.0-§110.3:
HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified to the Energy Commission.
§110.3(c)5:
Water heating recirculation loops serving multiple dwelling units meet the air release valve, backflow prevention, pump isolation
valve, and recirculation loop connection requirements of §I 10.3(c)5.
Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances (appli-
§ 110.5:
ances without an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool
ands a heaters.
§150.0(h)1:
Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA using design conditions specified
in §150.0(h)2.
§150.0(h)3A:
Installed air conditioner and heat pump outdoor condensing units shall have a clearance of at least five feet from the outlet of any
dryer vent.
§150.0(i):
Heating systems are equipped with thermostats that meet the setback requirements of §I 10.2(c).
§150.00)IA:
Storage gas water heaters with an energy factor equal to or less than the federal minimum standards shall be externally wrapped
with insulation having an installed thermal resistance of R-12 or greater.
§I50.00)1B:
Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water -heating systems, have R-12 external
insulation or R-16 internal insulation where the internal insulation R-value is indicated on the exterior of the tank.
For domestic hot water system piping, whether buried or unburied: the first 5 feet of hot and cold water pipes from the storage
tank, all piping with a nominal diameter of 3/4 inch or larger, all piping associated with a domestic hot water recirculation system
§ 150.00)2A:
regardless of the pipe diameter, piping from the heating source to storage tank or between tanks, piping buried below grade, and
all hot water pipes from the heating source to kitchen fixtures must be insulated according to the requirements of TABLE 120.3-
A.
§ 150.00)2B:
All domestic hot water pipes that are buried below grade must be installed in a water proof and non -crushable casing or sleeve
that allows for installation, removal, and replacement of the enclosed pipe and insulation.
2013 Low -Rise Residential Mandatory Measures Summary
§I50.00)2C:
Pipe for cooling system lines shall be insulated as specified in §I50.00)2A. Piping insulation for steam and hydronic heating
systems or hot waters stems with pressure > 15 psig shall meet the requirements in TABLE 120.3-A.
§150.00)3:
Insulation is protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
Insulation exposed to weather shall either be rated for outdoor use or installed with a cover suitable for outdoor service. For
§ 150.00)3A:
example, protected by aluminum, sheet metal, painted canvas, or plastic cover. Cellular foam insulation protected as specified or
painted with coating that is water retardant and provides shielding from solar radiation that degrades the material.
Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space shall have a Class I
§150.00)3B:
or Class II vapor retarding facing, or the insulation shall be installed at the thickness that qualifies as a Class I or Class II vapor
retarder.
Systems using gas or propane water heaters to serve individual dwelling units shall include: a 120V electrical receptacle within 3
feet of the water heater; a Category III or IV vent, or a Type B vent with straight pipe between the outside termination and the
§150.0(n)l:
space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the installed
water heater, and allows natural draining without pump assistance; and a gas supply line with a capacity of at least 200,000
Btu/hr.
§150.0(n)2:
Recirculating loops serving multiple dwelling units shall meet the requirements of §] 10.3(c)5.
§150.0(n)3:
Solar water -heating systems and collectors shall be certified and rated by the Solar Rating and Certification Corporation (SRCC)
or by a testing agency approved by the Executive Director.
Ducts and Fans Measures:
All air -distribution system ducts and plenums installed are sealed and insulated to meet the requirements of CMC §601.0, §602.0,
§603.0, §604.0, §605.0 and ANSI/SMACNA-006-2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition.
Supply -air and return -air ducts and plenums are insulated to a minimum installed level of R-6.0 (or higher if required by CMC
§605.0) or enclosed entirely in directly conditioned space as confirmed through field verification and diagnostic testing
(RA3.1.4.3.8). Connections of metal ducts and inner core of flexible ducts are mechanically fastened. Openings shall be sealed
§150.0(m)l:
with mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 18113 or
aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than 'A inch, the
combination of mastic and either mesh or tape shall be used. Building cavities, support platforms for air handlers, and plenums
defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying
conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms
shall not be compressed to cause reductions in the cross -sectional area of the ducts.
Factory -Fabricated Duct Systems shall comply with specified requirements for duct construction, connections, and closures; joints
§150.0(m)2:
and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes unless such tape is
used in combination with mastic and, draw bands.
§150.0(m)3-6:
Field -Fabricated Duct Systems shall comply with requirements for: pressure -sensitive tapes, mastics, sealants, and other
requirements specified for duct construction; duct insulation R-value ratings; duct insulation thickness; and duct labeling.
§ 150.0(m)7:
All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or automatic
dampers.
§150.0(m)8:
Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers
except combustion inlet and outlet air openings and elevator shaft vents.
Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind but not
§ 150.0(m)9:
limited to the following: insulation exposed to weather shall be suitable for outdoor service. For example, protected by aluminum,
sheet metal, painted canvas, or plastic cover. Cellular foam insulation shall be protected as above or painted with a coating that is
water retardant and provides shielding from solar radiation.
§I50.0(m)] 0:
Flexible ducts cannot have porous inner cores.
When space conditioning systems use forced air duct systems to supply conditioned air to an occupiable space, the ducts shall be
§I50.0(m)11:
sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in accordance with Reference
Residential Appendix RA3.
Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal
§150.0(m)12:
conditioning component, except evaporative coolers, shall be provided with air filter devices that meet the requirements of
§ 150.0(m)12.
Space conditioning systems that utilize forced air ducts to supply cooling to an occupiable space shall have a hole for the
placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPP) in the supply plenum. The
§150.0(m)13:
space conditioning system must also demonstrate airflow > 350 CFM per ton of nominal cooling capacity through the return
grilles, and an air -handling unit fan efficacy < 0.58 W/CFM as confirmed by field verification and diagnostic testing, in
accordance with Reference Residential Appendix RA3.
Zonally controlled central forced air cooling systems shall be capable of simultaneously delivering, in every zonal control mode,
§150.0(m)15:
an airflow from the dwelling, through the air handler fan and delivered to the dwelling, of> 350 CFM per ton of nominal cooling
capacity, and operating at an air -handling unit fan efficacy of < 0.58 W/CFM as confirmed by field verification and diagnostic
testing, in accordance with Reference Residential Appendix RA3.
All dwelling units shall meet the requirements of ASHRAE Standard 62.2. Neither window operation nor continuous operation of
§ 150.0(o):
central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of providing the
Whole Building Ventilation.
§150.0(o)]A:
Whole Building Ventilation airflow shall be confirmed through field verification and diagnostic testing, in accordance with
Reference Residential Appendix RA3.
Pool and Spa Heating Systems and Equipment Measures:
Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency
§ 110.4(a):
Regulations; an on -off switch mounted outside of the heater that allows shutting off the heater without adjusting the thermostat
setting; a permanent weatherproof plate or card with operating instructions; and shall not use electric resistance heating.
' 2013 Low -Rise Residential Mandatory Measures Summary
§I 10.4(b)1:
Any pool or spa heating equipment shall be installed with at least 36 inches of pipe between filter and heater or dedicated suction
and return lines, or built-up connections for future solar heating.
§ 110.4(b)2:
Outdoor pools or spas that have a heat pump or gas heater shall have a cover.
§I 10.4(b)3:
Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or pro -
rammed to run only during off-peak electric demand periods.
§110.5:
Natural gas pool and spa heaters shall not have a continuous burning pilot light.
§ 150.0(p):
Residential pool systems or equipment shall meet specified pump sizing, flow rate, piping, filters, and valve requirements.
Lighting Measures:
§110.9:
All lighting control devices and systems, ballasts, and luminaires shall meet the applicable requirements of §110.9.
§150.0(k)IA:
Installed luminaires shall be classified as high -efficacy or low -efficacy for compliance with §150.0(k) in accordance with TABLE
150.0-A or TABLE 150.0-B, as applicable.
§150.0(k)IB:
When a high efficacy and low efficacy lighting system are combined in a single luminaire, each system shall separately comply
with the applicable provisions of § 150.0(k).
The wattage and classification of permanently installed luminaires in residential kitchens shall be determined in accordance with
§150.0(k)1C:
§130.0(c). In residential kitchens, the wattage of electrical boxes finished with a blank cover or where no electrical equipment has
been installed, and where the electrical box can be used for a luminaire or a surface mounted ceiling fan, shall be calculated as 180
watts of low efficacy lighting er electrical box.
§I50.0(k)1D:
Ballasts for fluorescent lamps rated 13 watts or greater shall be electronic and shall have an output frequency no less than 20 kHz.
Permanently installed night lights and night lights integral to installed luminaires or exhaust fans shall be rated to consume no
§150.0(k)1E:
more than 5 watts of power per luminaire or exhaust fan as determined in accordance with §I30.0(c). Night lights do not need to
be controlled by vacancy sensors. A
§ 150.0(k)1F:
Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods) shall meet the applicable
requirements of §I50.0(k).
§ 150.0(k)2A:
High efficacy luminaires must be switched separately from low efficacy luminaires.
§150.0(k)2B:
Exhaust fans shall be switched separately from lighting systems.
§I50.0(k)2C:
Luminaires shall be switched with readily accessible controls that permit the luminaires to be manually switched ON and OFF.
§150.0(k)2D:
Controls and equipment are installed in accordance with manufacturer's instructions.
§150.0(k)2E:
No control shall bypass a dimmer or vacancy sensor function if the control is installed to comply with §I50.0(k).
§150.0(k)2F:
Lighting controls comply with applicable requirements of §110.9.
An Energy Management Control System (FMCS) may be used to comply with dimmer requirements if: it functions as a dimmer
§150.0(k)2G:
according to §110.9; meets Installation Certificate requirements of §130.4; the EMCS requirements of §130.5; and all other
requirements in §150.0(k)2.
An Energy Management Control System (EMCS) may be used to comply with vacancy sensor requirements of § I50.0(k) if: it
§150.0(k)2H:
functions as a vacancy sensor according to §110.9; meets Installation Certificate requirements of §130.4; the EMCS requirements
of §130.5; and all other requirements in §150.0(k)2.
§ 150.0(k)2I:
A multiscene programmable controller may be used to comply with dimmer requirements of this section if it provides the
functionality of a dimmer according to § 110.9, and complies with all other applicable requirements in §I50.0(k)2.
§ 150.0(k)3A:
A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy.
Kitchen lighting includes all permanently installed lighting in the kitchen except internal lighting in cabinets that illuminate only
§150.0(k)3B:
the inside of the cabinets. Lighting in areas adjacent to the kitchen, including but not limited to dining and nook areas, are
considered kitchen lighting if they are not separately switched from kitchen lighting.
§ 150.0(k)4:
Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of illuminated
cabinet.
§150.0(k)5:
A minimum of one high efficacy luminaire shall be installed in each bathroom; and all other lighting installed in each bathroom
shall be high efficacy or controlled by vacancy sensors.
§150.0(k)6:
Lighting installed in attached and detached garages, laundry rooms, and utility rooms shall be high efficacy luminaires and
controlled by vacancy sensors.
§ 150.0(k)7:
Lighting installed in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms shall be high
efficacy, or shall be controlled by either dimmers or vacancy sensors.
Luminaires recessed into ceilings shall: be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other
nationally recognized testing/rating laboratory; have a label that certifies that the luminaire is airtight with air leakage less than 2.0
CFM at 75 Pascals when tested in accordance with ASTM E283; be sealed with a gasket or caulk between the luminaire housing
§I50.0(k)8:
and ceiling, and shall have all air leak paths between conditioned and unconditioned spaces sealed with a gasket or caulk; and
allow ballast maintenance and replacement without requiring cutting holes in the ceiling.
For recessed compact fluorescent luminaries with ballasts to qualify as high efficacy for compliance with § 150.0(k), the ballasts
shall be certified to the Energy Commission to comply with the applicable requirements in § 110.9.
For single-family residential buildings, outdoor lighting permanently mounted to a residential building or other buildings on the
same lot shall be high efficacy, or may be low efficacy if it meets all of the following requirements:
i. Controlled by a manual ON and OFF switch that does not override to ON the automatic actions of Items ii or iii below: and
§150.0(k)9A:
ii. Controlled by a motion sensor not having an override or bypass switch that disables the motion sensor, or controlled by a
motion sensor having a temporary override switch which temporarily bypasses the motion sensing function and automatically
reactivates the motion sensor within 6 hours; and
iii. Controlled by one of the following methods:
2013 Low -Rise Residential Mandatory Measures Summary
a. Photocontrol not having an override or bypass switch that disables the photocontrol; or
b. Astronomical time clock not having an override or bypass switch that disables the astronomical time clock, and which is
programmed to automatically turn the outdoor lighting OFF during daylight hours; or
c. Energy management control system which meets all of the following requirements: At a minimum provides the functionality of
an astronomical time clock in accordance with §110.9; meets the Installation Certification requirements in §130.4; meets the
requirements for an EMCS in §130.5; does not have an override or bypass switch that allows the luminaire to be always ON; and,
is pro rammed to automatically turn the outdoor lighting OFF during daylight hours.
For low-rise multifamily residential buildings, outdoor lighting for private patios, entrances, balconies, and porches; and outdoor
lighting for residential parking lots and residential carports with less than eight vehicles per site shall comply with one of the
§I50.0(k)9B:
following requirements:
i. Shall comply with §I50.0(k)9A: or
ii. Shall comply with the applicable requirements in §110,9, §130.0, §130.2, §130.4, §140.7 and §141.0.
§ 150.0(k)9C:
For low-rise residential buildings with four or more dwelling units, outdoor lighting not regulated by § 150.0(k)9B or 150.0(k)9D
shall comply with the applicable requirements in §110.9, §130.0, §130.2, §130.4, §140.7 and §141.0.
§ 150.0(k)9D:
Outdoor lighting for residential parking lots and residential carports with a total of eight or more vehicles per site shall comply
with the applicable requirements in § 110.9, § 130.0, § 130.2, § 130.4, § 140.7 and § 141.0.
§150.0(k)10:
Internally illuminated address signs shall comply with §140.8; or shall consume no more than 5 watts of power as determined
according to § 130.0(c).
§I50.0(k)11:
Lighting for residential parking garages for eight or more vehicles shall comply with the applicable requirements for
nonresidential garages in §110.9, §130.0, §130.1, §130.4, §140.6, and §141.0.
In a low-rise multifamily residential building where the total interior common area in a single building equals 20 percent or less of
§ 150.0(k)12A:
the floor area, permanently installed lighting for the interior common areas in that building shall be high efficacy luminaires or
controlled by an occupant sensor.
In a low-rise multifamily residential building where the total interior co on area in a single building equals more than 20
percent of the floor area, permanently installed lighting in that building shall:
§150.0(k)12B:
i. Comply with the applicable requirements in §110.9, §130.0, §130.1, §140.6 and §141.0; and
ii. Lighting installed in corridors and stairwells shall be controlled by occupant sensors that reduce the lighting power in each
space by at least 50 percent. The occupant sensors shall be capable of turning the light fully On and Off from all designed paths of
ingress and egress.
Solar Ready Buildings:
Single family residences located in subdivisions with ten or more single family residences and where the application for a
§ 110.10(a)1:
tentative subdivision map for the residences has been deemed complete, by the enforcement agency, on or after January 1, 2014,
shall comply with the requirements of §I 10.10(b) through §I10.10(e).
§I10.10(a)2:
Low-rise multi -family buildings shall comply with the requirements of §I 10.10(b) through §110.10(d).
The solar zone shall have a minimum total area as described below. The solar zone shall comply with access, pathway, smoke
ventilation, and spacing requirements as specified in Title 24, Part 9 or other Parts of Title 24 or in any requirements adopted by a
local jurisdiction. The solar zone total area shall be comprised of areas that have no dimension less than 5 feet and are no less than
80 square feet each for buildings with roof areas less than or equal to 10,000 square feet or no less than 160 square feet each for
§I 10.10(b)l:
buildings with roof areas greater than 10,000 square feet.
For single family residences the solar zone shall be located on the roof or overhang of the building and have a total area no less
than 250 square feet. For low-rise multi -family buildings the solar zone shall be located on the roof or overhang of the building or
on the roof or overhang of another structure located within 250 feet of the building or on covered parking installed with the
building project and have a total area no less than 15 percent of the total roof area of the building excluding any skylight area. '
§I 10.10(b)2:
All sections of the solar zone located on steep -sloped roofs shall be oriented between 110 degrees and 270 degrees of true north.
§I 10.10(b)3A:
No obstructions, including but not limited to, vents, chimneys, architectural features, and roof mounted equipment, shall be
located in the solar zone.
Any obstruction, located on the roof or any other part of the building that projects above a solar zone shall be located at least twice
§110.10(b)3B:
the distance, measured in the horizontal plane, of the height difference between the highest point of the obstruction and the
horizontal projection of the nearest point of the solar zone, measured in the vertical lane.
§ 110.10(b)4:
For areas of the roof designated as solar zone, the structural design loads for roof dead load and roof live load shall be clearly
indicated on the construction documents.
The construction documents shall indicate: a location for inverters and metering equipment and a pathway for routing of conduit
§110.10(c):
from the solar zone to the point of interconnection with the electrical service (for single family residences the point of
interconnection will be the main service panel); a pathway for routing of plumbing from the solar zone to the water -heating
system.
§ 110.10(d):
A copy of the construction documents or a comparable document indicating the information from § 110.10(b) through § 110.10(c)
shall be provided to the occupant.
§ 110.10(e)l:
The main electrical service panel shall have a minimum busbar rating of 200 amps.
The main electrical service panel shall have a reserved space to allow for the installation of a double pole circuit breaker for a
§ 110.10(e)2:
future solar electric installation. The reserved space shall be: positioned at the opposite (load) end from the input feeder location or
main circuit location, and permanently marked as "For Future Solar Electric".
y 0