11-1274 (RER) Revision 1i
P.O. BOX 1504
78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
c&t!t 4 4 4"
Application Number:
11-00001274
Property Address:
54175 AVENIDA HERRERA
APN:
774-213-019-8 -000000-
Application description:
REMODEL - RESIDENTIAL
Property Zoning:
COVE RESIDENTIAL
Application valuation:
40000
Applicant: „ ) n - y4rchiiect or Engineer:
M14
------------------
LICENSED CONTRACTOR'S DECLARATION
BUILDING & SAFETY DEPARTMENT
BUILDING PERMIT
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with
Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect.
License Class: License No.:
Date: Contractor:
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the
following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).:
(_ 1 I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
Contractors' State License Law does not apply to an owner of property who builds or improves. thereon,
and who does the work himself or herself through his or her own employees, provided that the
improvements are not intended or offered for sale. If, however, the building or improvement is sold within
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.).
(_) I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed
pursuant to the Contractors' State License Law.).
r I am exempt under Sec. , B.&P.C. for this reason
Date: Z2, Owner: .
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's Address:
LQPERMIT
VOICE (760) 777-7012
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Date: 2/22/13
Owner:
RADI ROBERT/WANT QIMIN
54305 EISENHOWER DRIVEr�76��F
LA QUINTA, CA 92253
2 2013Contractor: EHOwner A QUINTA
-----------------------------------------------
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
_ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided
for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued.
_ I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
Code, for the performance of the work for which this permit is issued. My workers' compensation
insurance carrier and policy number are:
Carrier Policy Number
I certify that; in the performance of the work for which this permit is issued, I shall not employ any
person in any manner so as to become subject to the workers' compensation laws of California,
and agree that, if I should become subject to the workers' compensation provisions of Section
3700 of the Labor Code, I shall forthwcomply with those provisions.
Date: Z Z Applicant:
WARNING: FAILURE TO SECURE WORKERS' COMP E ION COVERAGE IS UNLAWFUL, AND SHALL
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
DOLLARS ($100,0001. IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
conditions and restrictions set forth on this application.
I . Each person upon whose behalf this application is made, each person at whose request and for
whose benefit work is performed under or pursuant to any permit issued as a result of this application,
the owner, and the applicant, each agrees to, and shall defend, indemnify and hold Harmless the City
of La Quinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not commenced
Within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject
permit to cancellation.
I certify that I have read this application and state that the above information is correct. I agree to comply with all
city and county ordinances and state laws relating to building construction, 59d hereby authorize representatives
of this county to enter upon the above-mentioned property f m ection e0toses.
Date: Signature (Applicant or Agent):
r
It
LQPEEMIT
Application Number . . . . . 11-00001274
------• Structure Information 176SF ADDITION W/REMODEL/VB/RES-3/CL-A -----
Other struct info . . . . . CODE EDITION 2010
----------------------------------------------------------------------------
Permit . . .
Additional desc . .
Permit Fee . . . .
Issue Date . . .
Expiration Date . .
BUILDING PERMIT
349.50 Plan Check Fee . 227.18
2/15/12 Valuation . . . . 40000
4/29/13
Qty Unit
Charge
Per
Extension
BASE
FEE
252.00
15.00
----------------------------------------------------------------------------
6.5000
THOU BLDG
25,001-50,000
97.50
Permit .
. .
ELECT - ADD/ALT/REM
Additional desc
.
Permit Fee . .
. .
79.87
P1an.Check Fee
19.97
Issue Date . .
. .
2/15/12
Valuation . .
0
Expiration Date
4/29/13
Qty Unit
Charge
Per
Extension
BASE
FEE
15.00
176.00
.0200
ELEC
GARAGE OR NON-RESIDENTIAL
3.52
20.00
.7500
PER ELEC
DEVICE/FIXTURE 1ST 20
15.00
103.00
------------- --------------------------------------------------------------
.4500
EA ELEC
DEVICE/FIXTURE >20
46.35
Permit .
. . MECHANICAL
Additional desc
.
Permit Fee . .
. .
81.50,
Plan Check Fee
20.38
Issue Date
. .
2/15/12
Valuation . . . .
0
Expiration Date
4/29/13
Qty Unit
Charge
Per
Extension
BASE
FEE
15.00
1.00
4.5000
EA MECH
VENT INST/ DUCT ALT
4.50
2.00
9.0000
EA MECH
APPL REP/ALT/ADD
18.00
2.00
9.0000
EA MECH
B/C <=3HP/100K BTU
18.00
3.00
6.5000
EA MECH
VENT FAN
19.50
1.00
--------------------------------------------
6.5000
EA MECH
EXHAUST HOOD
--------------------------------
6.50
Permit. . . PLUMBING
Additional.. desc . .
Permit Fee . . . . 103.50
Issue Date . . 2/15/12
Plan Check Fee 25.88
Valuation . . 0
i
Application Number . . . . . 11-00001274
Permit . . . . . PLUMBING
Expiration Date . . 4/29/13
Qty Unit Charge Per
Extension
BASE FEE
15.00
11.00 6.0000 EA PLB FIXTURE
66.00
2.00 6.0000 EA PLB ROOF DRAIN
12.00
1.00 7.5000 EA PLB WATER HEATER/VENT
7.50
1.00 3.0000 EA- PLB WATER INST/ALT/REP
3.00
----------------------------------------------------------------------------
Special Notes and Comments
176SF MECHANICAL ROOM/STORAGE ADDITION
WITH DECK AND REMODEL TO GARAGE,
WORKSHOP AND RESIDENCE/VB/RES-3/CLASS
A -FR [ENGINEERED] THIS PERMIT DOES NOT
INCLUDE ALTERATION TO THE EXISTING POOL
OR REPLACEMENT OF MISSING EQUIPMENT, NOR
DOES IT PERMIT THE WORKSHOP TO BE USED
FOR SLEEPING PURPOSES, OR THE EXISTING
UNPERMITTED FOUNDATION TO BE USED FOR
NEW CONSTRUCTION. PUBLIC WORKS APPROVED
LOT MERGER NUMBER: 2011-496 - RECORDED
12/16/2011 DOCUMENT NUMBER:
2011-0557074. CODE CASE NUMBER: 10-5433
[JM] 2010 CALIFORNIA BUILDING CODES. .
January 31, 2012 3:50:47 PM AORTEGA
REVISION 1: STRUCTURAL FOUNDATION
ALTERATIONS - SEE NEW S.1 SHEET FOR
SCOPE OF WORK.
April 5, 2012 3:14:50 PM AORTEGA
----------------------------------------------------------------------------
Other Fees . . . . . . . . . BLDG STDS ADMIN (SB1473)
2.00
CHANGE OF CONTRACTOR
4.50
ENERGY REVIEW FEE
22:72
HOURLY PLAN CHECK r
227.50
REPLACEMENT INSP CARD
15.00
STRONG MOTION (SMI) - RES
4.00
Fee summary Charged Paid Credited
---------------------------------------------------------
Due
Permit Fee Total 614.37 614.37 .00
.00
Plan Check Total 293.41 293.41 .00
.00
Other Fee Total 275.72 256.22 .00
19.50
Grand Total 1183.50 1164.00 .00
19.50
LQPERMIT
Bin #,
�lt of.. La Qu1nta.
Building 8f Safety. Division
P.O. Box. 150¢,-7.8-495 Calle Tampico
raP.Quinta, CA 92253 -:(760) 777-7012
Buildin ermit Applrcaitonand Tracking Sheet
Permit #
Project Address: ' Owner's Name:. ✓ —se 7
A. P. Number. Address: 5' Acm N/
Legal Description: City, ST, Zip: — 9219 S
Contrarto[ r l h` e.
,� � o Telephone:
Address: Project Description: �Q '
City. ST, Zip= Cfr tlt `- 0 ,
Telepho 76'p 5 -' R '
State Lie. #: City Lic. #; 'qcr D
Arch., Engr., Designer _ �-
Address-. / `, �
City., ST, Zip: K
-46 r—
Telephone: T Construction Type:. Occupancy:
State Lic. #: Project type (circle one): New Add'n Alter Repair Demo
Name of Contact Person: Sq. Ft : #Stories: # Unity:
Telephone # of Contact Person: ' . Estimated Value of Project:
APPLICANT: DO NOT WRITE BELOW THIS. UNE
#
Submittal
Pig
Req'd
Recd
I
TRACKING PERMIT FEES
Plan Check submitted .� Item Amount
S"durat Cales.
7-
Reviewed, ready for corrections A� Plan Check Deposit. .
Truss Cates:
Called Contact Person Plan Check Balance.
Tide 24 Cates.
Plans picked up Constriction
Flood plain plan
Plans resubmitted.*. Mechanical
Grading plan
2'! Review, ready for correcdo a Electrical
Subcontactor List
Called Contact Person Plumbing
Grant Deed
Plans picked up SALL
H.O.A. Approval
Plans resubmitted Grading
M HOUSE:-
'"` Review', ready for correedons/issie Developer Impact Fee
Planning Approval.
Called Contact Person A.I.P.P.
Pub. Wks. Appr
Date of permit issue h ar
School Fees
op
Total Permit Fees
i/�
P.O. BOX 1504
541-1 S Av-evA, oQGk
c&f 4 4aakrw
LA QUINTA, CALIFORNIA 92247-1504
78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
BUILDING & SAFETY DEPARTMENT
PROPERTY OWNER'S PACKAGE
(760)777-7012
FAX (760) 777-7011
Disclosures & Forms for Owner -Builders Applying for Construction Permits
IMPORTANT! NOTICE TO PROPERTY OWNER
Dear Property Owner:
An application for a building permit has been submitted in your name listing yourself as the builder of the property
improvements specified at
We are providing you with an Owner -Builder Acknowledgment and Information Verification Form to make you aware of your
responsibilities and possible risk you may incur by having this permit issued in your name as the
Owner -Builder. We will not issue a building permit until you have read, initialed your understanding of each provision,
signed, and returned this form to us at our official address indicated. An agent of the owner cannot execute this notice
unless you, the property owner, obtain the prior approval of the permitting authority.
OWNER'S ACKNOWLEDGMENT AND VERIFICATION OF INFORMATION
DIRECTIONS: Read and initial each statement below to signify you understand or verify this information.
c A. I understand a frequent practice of unlicensed persons is to have the property owner obtain an "Owner -Builder"
building permit that erroneously implies that the property owner is providing his or her own labor and material personally. I, as
an Owner -Builder, may be held liable and subject to serious financial risk for any injuries sustained by an unlicensed person
and his or her employees while working on my property. My homeowner's insurance may not provide coverage for those
injuries. I am willfully acting as an Owner -Builder and am aware of the limits of my insurance coverage for injuries to workers
on my property.
. I understand building permits are not required to be signed by property owners unless they are responsible for the
construction and are not hiring a licensed Contractor to assume this responsibility.
I understand as an "Owner -Builder" I am the responsible party of record on the permit. I understand that I may protect
*self from potential financial risk by hiring a licensed Contractor and having the permit filed in his or her name instead of my
own.
60. I understand Contractors are required by law to be licensed and bonded in California and to list their license numbers on
pernnts and contracts.
a- W- I understand if I employ or otherwise engage any persons, other than California licensed Contractors, and the total value
of my construction is at least five hundred dollars ($500), including labor and materials, I may be considered an "employer"
under state and federal law.
(2P16. I understand if I am considered an "employer" under state and federal law, I must register with the state and federal
government, withhold payroll taxes, provide workers' compensation disability insurance, and contribute to unemployment
compensation for each "employee." I also understand my failure to abide by these laws may subject me to serious financial
risk.
I understand under California Contractors' State License Law, an Owner -Builder who builds single-family residential
structures cannot legally build them with the intent to offer them for sale, unless all work is performed by licensed
subcontractors and the number of structures does not exceed four within any calendar year, or all of the work is performed
under contract with a licensed general building Contractor.
(%'X/ 8. I understand as an Owner -Builder if I sell the property for which this permit is issued, I may be held liable for any
financial or personal injuries sustained by any subsequent owner(s) that result from any latent construction defects in the
workmanship or materials.
W9. I understand I may obtain more information regarding my obligations as an "employer" from the Internal Revenue
ervice, the United States Small Business Administration, the California Department.of Benefit Payments, and the California
Division of Industrial Accidents. I also understand I may contact the California Contractors' State License Board (CSLB) at 1-
800-321-CSLB (2752) or www.cslb.ca.gov for more information about licensed contractors.
W10. 1 am aware of and consent to an Owner -Builder building permit applied for in my name, and understand that I am the
party legally and financially responsible for . proposed construction activity at the following address:
efic4!�le
I agree that, as the party legally and financially responsible for this proposed construction activity, I will abide by all
laws and requirements that govern Owner=Builders as well as employers.
k(12. I agree to notify the issuer of this form immediately of any additions, deletions, or changes to any of the information I
ve provided on this form Licensed contractors are regulated by laws designed to protect the public. If you contract with
someone who -does not tave a license, the Contractors' State License Board may be unable to assist you with any financial loss
you may sustain as a result of a complaint. Your only remedy against unlicensed Contractors may be in civil court. It is also
important for you to understand that if an unlicensed Contractor or employee of that individual or firm is injured while working
on your property, you may be held liable for damages. If you obtain a permit as Owner -Builder and wish to hire Contractors,
you will be responsible for verifying whether or not those Contractors are properly licensed and the status of their workers'
compensation insurance coverage.
Before a building permit can be issued, this form must be completed and signed by the property owner,and returned to
the agency responsible for issuing the permit. Note: A copy of the property'owner's driver's license, form notarization, or
other verification acceptable to, the agency isrequired to be presented when the permit is issued to verify the property
owner's signature.
Signature of property owner Date: 2/2Z
Note: The following Authorization Form is required to. be completed by the property owner only when designating
an agent of the property owner to apply for a construction permit for the Owner -Builder.
AUTHORIZATION OF AGENT TO ACT ON PROPERTY OWNER'S BEHALF
Excluding the Notice to Property Owner, the execution of which I understand is my personal responsibility, I hereby authorize
the following person(s) to act as my agent(s) to apply for, sign, and file the documents necessary to obtain an Owner -Builder
Permit for my project.
Scope of Construction Project (or Description of Work):
Project Location or Address:
Name of Authorized Agent:
Address of Authorized Agent:
Tel No
I declare under penalty of perjury that I am the property owner for the address listed.above and I personally filled out the above
information and certify its accuracy. Note: A copy of the owner's driver's license, form notarization, or'other verification
acceptable to the agency is required to be presented when the permit is issued to verify the property owner's signature.
Property Owner's Signature: Date:
I BUILDING ENERGY ANALYSIS REPORT I
PROJECT:
Radi Residence
54-175 Avenue Herrera
La Quinta, CA
Project Designer:
Report Prepared by:
Joan D. Hacker
Insu-form, Inc.
77-810 Las Montanas Road, Suite 201
Palm Desert, Ca 92211
760-345-1352
CITY OF LA QUINTA
BUILDING & SAFETY DEPT.
APPROVED
FOR CONSTRUCTION
Job Number: DATE ^ BY
Date:
1/25/2012
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2008 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC — www.energysoft.com.
EnergyPro 5.1 by EnergySoft User Number: 2655 RunCode: 2012-01-25T17:20:26 /D:
I I TABLE OF CONTENTS I
Cover Page 1.
Table of Contents 2
Form CF -1 R Certificate of Compliance 3
Form MF -1 R Mandatory Measures Summary 11
HVAC System Heating and Cooling Loads Summary 14
r
IEnergyPro 5.1 by EnergySoft Job Number: ID: User Number: 2655 1
PERFORMANCE CERTIFICATE: Residential Part 1 of 5
CF -1 R
Project Name
Radi Residence
Building Type m Single Family O Addition Alone
❑ Multi Family ® Existing+ Addition/Alteration
Date
1/25/2012
Project Address
54-175 Avenue Herrera La QuintsCA
California Energy Climate Zone
Climate Zone 15
Total Cond. Floor Area
2,880
Addition
0
# of Stories
2
FIELD INSPECTION ENERGY CHECKLIST
❑ Yes ❑ No HERS Measures -- If Yes, A CF -4R must be provided per Part 2 of 5 of this form.
❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details.
INSULATION
Construction Type
Area Special
Cavity (ft) Features see Part 2 of 5 Status
Wall Wood Framed
R-11 1,859 Existing
Door Opaque Door
None 40 Existing
Roof Wood Framed Attic
R-19 1,440 Existing
Slab Unheated Slab -on -Grade
None 1,440 Perim = 69' Existing
FENESTRATION U-
Orientation Area(ft) Factor
Exterior
SHGC Overhang Sidefins Shades Status
Front (SIM 21.0 0.710
0.73 2.0 none Bug Screen New
Front (SIM 21.0 0.710
0.73 2.0 none Bug Screen New
Left (NlM 10.5 0.710
0.73 2.0 none Bug Screen New
Left (NW) 53.4 0.710
0.73 2.0 none Bug Screen New
Rear (NE) 40.0 0.710
0.73 2.0 none Bug Screen New
Right (SE) 21.0 0.710
0.73 2.0 none Bug Screen New
Right (SE) 40.0 0.710
0.73 2.0 none Bug Screen New
Right (SE) 40.0 0.710
0.73 2.0 none Bug Screen New
Front (SIM 40.0 0.710
0.73 2.0 none Bug Screen New
Front (SIM 40.0 0.710
0.73 2.0 none Bug Screen New
Left (NlM 10.5 0.710
0.73 2.0 none Bug Screen New
HVAC SYSTEMS
Qty. Heating Min. Eff Cooling Min. Eff Thermostat Status
2 Split Heat Pump 7.00 HSPF Split Heat Pump 13.0 SEER Setback
Altered
HVAC DISTRIBUTION
Location Heating
Duct
Cooling Duct Location R -Value Status
Existing Ducted
Ducted Attic, Ceiling Ins, vented 2.1
Existing
WATER HEATING
Qty. Type Gallons Min. Eff Distribution Status
1 Small Elec. 50
0.87 No Pipe Insulation Altered
EnerqyPro 5.1 by Ener Soft User Number: 2655 RunCode: 20 12-01-2 5 71 7:20:26 ID:
Page 3 of 14
PERFORMANCE CERTIFICATE: Residential Part 1 of 5
CF -1 R
Project Name
Radi Residence
Building Type m Single Family ❑ Addition Alone
❑ Multi Family m Existing+ Addition/Alteration
Date
1/25/2012
Project Address
54-175 Avenue Herrera La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. Floor Area
2,880
Addition
0
# of Stories
2
FIELD INSPECTION ENERGY CHECKLIST
❑ Yes IZI No HERS Measures -- If Yes, A CF -4R must be provided per Part 2 of 5 of this form.
❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details.
INSULATION Area Special
Construction Type Cavity (ft) Features see Part 2 of 5 Status
FENESTRATION U- Exterior
Orientation Area(ft) Factor SHGC Overhang Sidefins Shades Status
Left (NlAq 3.0 0.710 0.73 2.0 none Bug Screen New
Left (NtM 10.5 0.710 0.73 2.0 none Bug Screen New
Rear (NE) 10.5 0.710 0.73 2.0 none Bug Screen New
Rear (NE) 40.0 0.710 0.73 2.0 none Bug Screen New
Rear (NE) 20.0 0.710 0.73 2.0 none Bug Screen New
Right (SE) 20.0 0.710 0.73 2.0 none Bug Screen New
Right (SE) 20.0 0.710 0.73 2.0 none Bug Screen New
HVAC SYSTEMS
Qty. Heating Min. Eff Cooling Min. Eff Thermostat Status
HVAC DISTRIBUTION Duct
Location Heating Cooling Duct Location R -Value Status
WATER HEATING
Qty. Type Gallons Min. Eff Distribution Status
EnergyPro 5.1 by Ener Soft User Number: 2655 RunCode: 2012-01-25717:20:26 ID:
Page 4 of 14
PERFORMANCE CERTIFICATE: Residential (Part 2 of 5) CF -1 R
Project Name
Radi Residence
Building Type m Single Family ❑ Addition Alone
1 ❑ Multi Family m Existing+ Addition/Alteration
Date
1/25/2012
SPECIAL FEATURES INSPECTION CHECKLIST
The enforcement agency should pay special attention to the items specified in this checklist. These items require special written
justification and documentation, and special verification to be used with the performance approach. The enforcement agency
determines the adequacy of the'justificatibn, and may reject a building or design that otherwise complies based on the adequacy of
the special 'ustification and documentation submitted.
The Existing Heat Pump Exist HVAC has an HSPF less than the Vintage Defaults. Field verification is required.
HERS REQUIRED VERIFICATION
Items in this section require field testing and/or verification by a certified HERS Rater. The inspector must. receive a
completed CF -4R form for each of the measures listed below for final to be given.
Ener Pro 5.1 by Ene Soft User Number: 2655 Run Code: 2012-01-25T17:20:26 /D: Page 5 of 14
PERFORMANCE CERTIFICATE: Residential (Part 3 of 5) CF -1 R
Project Name
Building Type m Single Family_ 0 Addition Alone
Date
Radi Residence
1 0 Multi Family, m Existing+ Addition/Alteration
1112512012
ANNUAL ENERGY USE SUMMARY
Standard Proposed Margin
TDV kBtu/ft2- r
Space Heating 10.52 6.98 3.54
Space Cooling 118.03 116.69 1.33
Fans 22.56 25.19 -2.63
Domestic Hot Water 23.05 21.02 2.02
Pumps 0.00 0.00 0.00
Totals 174.16 169.89 4.27
Percent Better Than Standard: 2.4%
BUILDING COMPLIES - NO HERS VERIFICATION REQUIRED
Fenestration
Building Front Orientation: (Svv) 225 deg Ext. Walls/Roof Wall Area Area
Number of Dwelling Units: 1.00 (Sw) . 640 122
Fuel Available at Site: Natural Gas (Nw) 520 88
Raised Floor Area: 0 (NE) 600 111
Slab on Grade Area: 1,440 (SE):.: 600 141
Average Ceiling Height: 8.0 Roof 1,440 0
Fenestration Average U -Factor: 0.71 TOTAL: 461
Average SHGC: 0.73 Fenestration/CFA Ratio: 16.0
REMARKS
STATEMENT OF COMPLIANCE
This certificate of compliance lists the building features and specifications needed
to comply with Title 24, Parts 1 the Administrative Regulations and Part 6 the'
Efficiency Standards of the California Code of Regulations.
The documentation author hereby certifies that the documentation is accurate and complete.
Documentation Author
Company Insu-form, Inc.
1/152012
Address 77-810 Las Montanas Road, Suite 201 Name Joan D. Hacker
City/State/ZipCity/State/Zip Palm Desert, Ca 92211 Phone 760-345-1352 Signed Date
The individual with overall design responsibility hereby certifies that the proposed building design represented in this set
of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and
with any other calculations submitted with this permit application, and recognizes that compliance using duct design,
duct sealing, verification of refrigerant charge, insulation installation quality, and building envelope sealing require
installer testing and certification and field verification by an approved HERS rater.
Designer or Owner (per Business & Professions Code)
Company 60 SfluttuY(A 531QftV-J
Address `7g 08D CAtz A)14YOy 54"k102- Name AZA 1"T 4O1'&kY
City/State/Zip L a Q Wok, CA • 9 225 3 Phone(7l o_) -77/_ qR q3 Signed License # Date
Ener Pro 5.1 by EnerqySoft User Number.' 2655 RunCode: 2012-01-25T17:20:26 /O: Page 6 of 14
CERTIFICATE OF
COMPLIANCE:
Residential
(Part
4 of 5) CF -1 R
Project Name
Radi Residence
Building
1
Type m
❑
Single Family O Addition Alone
Multi Family m Existing+ Addition/Alteration
Date
1112512012
OPAQUE SURFACE DETAILS
Surface U-
Type Area Factor
Insulation
Cavity Exterior
Frame Interior
Frame Azm
Joint Appendix
Tilt Status 4
Location/Comments
Wall 238 0.110
R-11
225
90 Exisfing 4.3.1-A2
Existing Living
Door 40 1.450
None
225
90 Existing 4.5.1-A1
Existing Living
Wall 196 0.110
R-11
315
90 Existing 4.3.1-A2
Existing Living
Wall 260 0.110
R-11
45
90 Existin : 4.3.1-A2
Existing Living
Roof 68 0.049
R-19
225
0 Existin 4.2.1-A4
Existing Living
Slab 1,440 0.730
None
0 180 Existing 4.4.7-A1
Existing Living
Wall 199 0.110
R-11
135
90 Existing 4.3.1-A2
Existing Living
Door 20 1.450
None
135
90 Remove 4.5.1-A1
Existing Living
Wall 240 0.110
R-11
225
90 Existing 4.3.1-A2
Existing Living
Wall 2361 0.110
R-11
315
90 Existing 4.3.1-A2
Existing Living
Wall 230 0.110
R-11
451
90 Existing 4.3.1-A2
Existing Living
Roof 1,372 0.049
R-19
225
0 Existing 4.2.1-A4
Existing Living
Wall 260 0.110
R-11
135
90 Existing 4.3.1-A2
Existing Living
------------------
FENESTRATION SURFACE
DETAILS
ID Type Area
U -Factor
SHGC2
Azm Status
Glazing Type
Location/Comments
1 Window 21.0
1.190 Default
0.83 Default
225 Removed
Single Metal Clear
Existing Living
2 Window 21.0
1.190 Default
0.83 Default
225 Removed
Single Metal Clear
Existing Living
3 Window 21.0
0.710 Default
0.73 Default
225 New
Double Metal Clear
Existing Living
4 Window 21.0
0.710 Default
0.73 Default
225 New
Double Metal Clear
Existing Living
5 Window 17.8
1.190 Default
0.83 Default
315 Removed
Single Metal Clear
Existing Living
6 Window 10.5
1.190 Default
0.83 Default
315 Removed
Single Metal Clear
Existing Living
7 Window 10.5
0.710 Default
0.73 Default
315 New
Double Metal Clear
Existing Living
8 Window 53.4
1.190 Default
0.83 Default
315 Removed
Single Metal Clear
Existing Living
9 Window 53.4
0.710 Default
0.73 Default
315 New
Double Metal Clear
Existing Living
10 Window 40.0
1.190 Default
0.83 Default
45 Removed Single Metal Clear
Existing Living
11 Window 40.0
0.710 Default
0.73 Default
45 New
Double Metal Clear
Existing Living
12 Window 21.0
1.190 Default
0.83 Default
135 Removed Single Metal Clear
Existing Living
13 Window 21.01
0.710 Default
0.73 Default
135 New
Double Metal Clear
Existing Living
14 Window 53.41
1.190 1 Default
0.83 Default
135 Removed Single Metal Clear
Existing Living
15 Window 53.41
1.190 1 Default
0.83 Default
135 Removed Single Metal Clear
Existing Living
16 Window 40.01
0.710 1 Default
0.73 Default
135 New
Double Metal Clear
Existing Living
(1) Ll -Factor Type:
2 SHGC Type:
116-A = Default Table from Standards, NFRC = Labeled Value
116-B = Default Table from Standards, NFRC = Labeled Value
EXTERIOR SHADING DETAILS
ID Exterior Shade Type
SHGC
Window
H t Wd
Ove hanq Left Fin
Len H t LExt RExt• Dist Len
Right Fin
Hat Dist Len H t
1 Bug Screen
0.76
3.51 6.0
2.0 0.1
2.0 2:U
2 Bug Screen
0.76
3.5 6.0
2.0 0.1
2.0 i3O
3 Bug Screen
0.76
3.5 6.0
2.0 0.1
2.0 2-.0-
4 Bug Screen
0.76
3.5 6.0
2.0 0.1
2.0 2,0
5 Bug Screen
0.76
6.8 2.8
2.0 0.1
2.0 2.0
6 Bug Screen
0.76
3.5 3.0
2.0 0.1
2.0 2.0
7 Bug Screen
0.76
3.0 3.5
2.0 0.1
2.0 '2.0
8 Bug Screen
0.76
6.8 8.0
2.0 0.1
2.0 2.0
9 Bug Screen
0.76
6.8 8.0
2.0 0.1
2.0 2.0
10 Bug Screen
0.76
6.8 6.0
2.0 0.1
2.0 2.0
11 Bug Screen
0.76
6.8 6.0
2.0 0.1
2.0 2.0
12 Bug Screen
0.76
3.5 6.0
2.0 0.1
2.0 2.0
13 Bug Screen
0.76
3.5 6.0
2.0 0.1
2.0 2.0
14 Bug Screen
0.76
6.8 6.0
2.0 0.1
2.0 2.0
15 Bug Screen
0.761
6.81 8.0
2.0 0.1
2.0 2.0
16 JBug Screen
1 0.761
6.81 6.0
2.0 0.1
2.0 2.0
Ener Pro 5.1 by Ener Soft
User Number: 2655 RunCode: 2012-01-25T17:20:26 ID:
Page 7 of14
CERTIFICATE OF COMPLIANCE:
Residential
(Part 4 of 5) CF -1 R
Project Name
Radi Residence
Building Type m Single Family ❑ Addition Alone
1 ❑ Multi Family 10 Existing+ Addition/Alteration
Date
1112512012
OPAQUE SURFACE DETAILS
Surface U-
Type Area Factor
Insulation Joint Appendix
Cavity Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments
FENESTRATION SURFACE DETAILS
ID
T e Area
U -Factor
SHGC
Azm Status GlazingType
Location/Comments
17
Window 40.0
0.710 Default
0.73 Default
135 New Double Metal Clear
Existing Living
18
Window 40.0
1.190 Default
0.83 Default
225 Removed Single Metal Clear
Existing Living
19
Window 40.0
0.710 Default
0.73 Default
225 New Double Metal Clear
Existing Living
20
Window 20.0
1.190 Default
0.83 Default
225 Removed Single Metal Clear
Existing Living
21
Window 40.0
1.190 Default
0.83 Default
225 Removed Single Metal Clear
Existing Living
22
Window 40.0
0.710 Default
0.73 Default
225 New Double Metal Clear
Existing Living
23
Window 10.5
1.190 Default
0.83 Default
315 Removed Single Metal Clear
Existing Living
24
Window 10.5
0.710 Default
0.73 Default
315 New Double Metal Clear
Existing living
25
Window 3.0
1.190 Default
0.83 Default
315 Removed Single Metal Clear
Existing Living
26
Window 3.0
0.710 1 Default
0.73 Default
315 New Double Metal Clear
Existing Living
27
Window 10.5
1.190 Default
0.83 Default
315 Removed Single Metal Clear
Existing Living
28
Window 10.5
0.710 Default
0.73 Default
315 New DoubleMeta/ Clear
Existing Living
29
Window 10.5
1.190 Default
0.83 Default
45 Removed Single Metal Clear
Existing Living
30
Window 10.5
0.710 Default
0.73 Default
45 New Double Metal Clear
Existing Living
31
Window 20.0
1.190 Default
0.83 Default
45 Removed Single Metal Clear
Existing Living
32
Window 18.0
1.190 Default
0.83 Default
45 Removed Single Metal Clear
Existing Living
(1) U -Factor Type:
2 SHGC Type:
116-A = Default Table from Standards, NFRC = Labeled Value
116-B = Default Table from Standards, NFRC = Labeled Value
EXTERIOR SHADING DETAILS
ID
Exterior Shade Type
SHGC
Window
H t Wd
Ove hang Left Fin Right Fin
Len H t LExt REM Dist Len H t Dist Len H t
17
Bug Screen
0.76
6.8 6.0
2.0 0.1 2.0 2.0
18
Bug Screen
0.76
6.8 6.0
2.0 0.1 2.0 2.0
19
Bug Screen
0.76
6.8 6.0
2.0 0.1 2.0 2.0
20
Bug Screen
0.76
4.0 5.0
2.0 0.1 2.0 2.0
21
Bug Screen
0.76
6.8 6.0
2.0 0.1 2.0 2.0
22
Bug Screen
0.76
6.8 6.0
2.0 0.1 2.0 2.0
23
Bug Screen
0.76
3.5 3.0
2.0 0.1 2.0 2.0
24
Bug Screen
0.76
3.5 3.0
2.0 0.1 2.0 2,0
25
Bug Screen
0.76
1.0 3.0
2.0 0.1 2.0 2:a
26
Buiq Screen
0.76
1.0 3.0
2.0 0.1 2.0 2:b
27
Bug Screen
0.76
3.5 3.0
2.0 0.1 2.0 2.b
28
Bug Screen
0.76
3.51 3.0
2.0 0.1 2.0 2.`6.
29
Bug Screen
0.76
3.5 3.0
2.0 0.1 2.0 2.0
30
Bug Screen
0.76
3.5 3.0
2.0 0.1 2.0 2.0
31
IBug Screen
0.76
4.0 5.0
2.0 0.1 2.0 2.01 1
32
JBug Screen
0.76
3.5 3.0
2.0 0.1 2.0 2.01 1
Ener
Pro 5.1 by EnergySoft
User Number.- 2655 RunCode: 2012-01-25717:20:26 ID:
Page 8 of 14
CERTIFICATE OF COMPLIANCE:
Residential (Part 4 of 5) CF-1 R
Project Name
Radi Residence
Building Type m Single Family; ❑ Addition Alone
❑ Multi Family. m Existing+ Addition/Alteration
Date
1112512012
OPAQUE SURFACE DETAILS
Surface U-
Type Area Factor
Insulation Joint Appendix
Cavity Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments
FENESTRATION SURFACE DETAILS
ID
Type Area
U-Factor
SHGC
Azm Status Glazing Type Location/Comments
33
Window 40.0
0.710 Default
0.73 Default
45 New Double Metal Clear Existing Living
34
I/l/indow 20.0
1.190 Default
0.83 Default
45 Removed Single Metal Clear Existing Living
35
Window 20.0
0.710 Default
0.73 Default
45 New Double Metal Clear Existing Living
36
Window 20.0
1.190 Default
0.83 Default
135 Removed Single Metal Clear Existing Living
37
Window 20.0
0.710 Default
0.73 Default
135 New Double Metal Clear Existing Living
38
Window 20.0
1.190 Default
0.83 Default
135 Removed Single Metal Clear Existing Living
39
Window 20.0
0.710 Default
0.73 Default
135 New Double Metal Clear Existing Living
40
Window 24.0
1.190 Default
0.83 Default
135 Removed Single Metal Clear Existing Living
(1) Ll-Factor Type:
2 SHGC Type:
116-A = Default Table from Standards, NFRC = Labeled Value
116-B = Default Table from Standards, NFRC = Labeled Value
EXTERIOR SHADING DETAILS
ID
Exterior Shade Type
SHGC
Window
-Hqt TWd
Ove hanq Left Fin Right Fin
Len H t I LExt RExt Dist Len H t Dist Len H t
33
Bug Screen
0.76
6.8 6.0
2.0 0.1 2.0 2.0
34
Bug Screen
0.76
4.0 5.0
2.0 0.1 2.0 2.0
35
Bug Screen
0.76
4.0 5.0
2.0 0.1 2.0 2.0
36
Bug Screen
0.76
4.0 5.0
2.0 0.1 2.0 2.0
37
Bug Screen
0.76
4.0 5.0
2.0 0.1 2.0 2.0
38
Bug Screen
0.76
4.0 5.0
2.0 0.1 2.0 2.0
39
Bug Screen
0.76
3.0 8.0
2.0 0.1 2.0 2.0
40
Bug Screen
0.76
4.0 5.0
2.0 0.1 2.0 2.0
EnergyPro
5.1 by Ener Soft
User Number. 2655 RunCode: 2012-01-25717:20:26 ID: Pae 9 of 14
CERTIFICATE OF COMPLIANCE: Residential (Part 5 of 5)
CF-1 R
Project Name
Radi Residence
Building Type 10 Single Family' ❑ Addition Alone
❑ Multi Family ® Existing+ Addition/Alteration
Date
1112512012
BUILDING ZONE INFORMATION
System Name
Floor Area .
Zone Name New Existing . Altered Removed Volume Year Built
Existing Existing Living 1,440
11,520 1979
Existing Living 1,440
11,520 1979
Totals 0 2,8801 0 0
HVAC SYSTEMS
System Name C!y. Heating Type Min. Eff. Cooling Type Min. Eff. Thermostat Type Status
Existing
2 Split Heat Pump 7.00 HSPF Split Heat Pump 13.0 SEER Setback
Altered
pre-altered for above
Packaged Heat Pum 5.00 HSPF Packaged Heat Pump ' 10.0 SEER Setback
HVAC DISTRIBUTION
System Name
Duct
Heating Cooling Duct Location R-Value
Ducts
Tested? Status
Existing Ducted Ducted Attic, Ceiling Ins, vented 2.1
❑ Existing
pre-altered for above Ducted Ducted Attic, Ceiling Ins, vented 2.1
❑
WATER HEATING SYSTEMS
S stem Name
Qty.
Type
Distribution
Rated
Input
Btuh)
Tank
Cap.
Energy
Factor
or RE
Standby
Loss or
Pilot
Ext.
Tank
Insul. R-
Value
Status
AO SMITH PEC-050
1
Small Elec.
No Pipe Insulation
15,359
_WaIL
*,50
0.87
n/a
n/a
Altered
Existing
1
Small Elec.
pre-altered for Above
15,3591
28
0.80
n/a
n/a
MULTI-FAMILY WATER
HEATING
DETAILS
HYDRONIC
HEATING SYSTEM
PIPING
Control
Hot Water Piping Length
(ft)
0
i�
0 (h
Q —
System Name
Pipe
Len th
Pipe
Diameter
Insul.
Thick.
Qty.THP
Plenum Outside Buried
El
❑
EnergyPro 5.1 by Ener Soft User Number.' 2655 RunCode: 2012-01-25T17:20:26,. ID:
Pae 10 of 14
MANDATORY MEASURES SUMMARY: Residential Pae 1 of 3 MF -1 R
Project Name
Radi Residence
Date
1 1/25/2012
NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of
the compliance approach used. More stringent energy measures listed on the Certificate of Compliance (CF -1 R, CF -1 R -ADD, or CF -
1 R -ALT Form) shall supersede the items marked with an asterisk (*) below. This Mandatory Measures Summary shall be incorporated
into the permit documents, and the applicable features shall be considered by all parties as minimum component performance
specifications whether they are shown elsewhere in the documents or in this summary. Submit all applicable sections of the MF -1 R
Form with plans.
Building Envelope Measures:
116(a)l: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage.
§116(a)4: Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, certified Solar Heat Gain
Coefficient SHGC , and infiltration that meets the requirements of 10-111 (a).
117: Exterior doors and windows are weather-stripped; all joints and penetrations are caulked and sealed.
118(a): Insulationspecified or installed meets Standards for Insulating Material. Indicate type and include on CF -6R Form.
§118(1): The thermal emittance and solar reflectance values of the cool roofing material meets the requirements of §118(1) when the
installation of a Cool Roof is specified on the CF -1 R Form.
*§1 50 a : Minimum R-19 insulation in wood -frame ceiling orequivalent U -factor.
150(b): Loose fill insulation shall conform with manufacturer's installed design labeled R -Value.
*§1 50 c : Minimum R-13 insulation in wood -frame wall orequivalent U -factor.
*§1 50 d : Minimum R-13 insulation in raised wood -frame floor orequivalent U -factor.
150(f): Air retarding wrap is tested, labeled, and installed according to ASTM E1677-95 2000 when specified on the CF -1 R Form.
150 : Mandatory Vapor barrier installed in Climate Zones 14 or 16.
§150(1): Water absorption rate for slab edge insulation material alone without facings is too greater than 0.3%; water vapor permeance
rate is no greater than 2.0perm/inch and shall be protected from physical damage and UV light deterioration.
Fireplaces, Decorative Gas Appliances and Gas Log Measures:
150 e 1 A: Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox.
§150(e)1 B: Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is
equipped with a with a readily accessible, operable, and tight -fitting damper and or a combustion -air control device.
§150(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the
outside of the building, are prohibited.
Space Conditioning, Water Heating and Plumbing System Measures:
§110-§113: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified by the Energy
Commission.
§113(c)5: Water heating recirculation loops serving multiple dwelling units and High -Rise residential occupancies meet the air release
valve, backflow prevention, pump isolation valve, and recirculation loop connection requirements of §113(c)5.
§115: Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances
(appliances with an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool and
spa heaters.
150(h): Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA.
§1500): Heating systems are equipped with thermostats that meet the setback requirements of Section 112(c).
§150(j)1A: Storage gas water heaters rated with an Energy Factor no greater than the federal minimal standard are externally wrapped
with insulation having an installed thermal resistance of R-12 or greater. ,
§150(j)1 B: Unfired storage tanks, such as storage tanks or backup tanks for solar water -heating system, or other indirect hot water
tanks have R-12 external insulation or R-16 internal insulation where the internal insuldtion R -value is indicated on the exterior of the
tank.
§150(j)2: First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire length of
recirculating sections of hot water pipes are insulated per Standards Table 150-B.
§150(j)2: Cooling system piping (suction, chilled water, or brine lines),and piping insulated between heating source and indirect hot
water tank shall be insulated to Table 150-B and Equation 150-A.
§150(j)2: Pipe insulation for steam hydronic heating systems or hot water systems >15 psi, meets the requirements of Standards Table
123-A.
150(')3A: Insulation is protected from damage, including that due to sunlight, moisture equipment maintenance and wind.
§150(j)3A: Insulation for chilled water piping and refrigerant suction lines includes a vapor retardant or is enclosed entirely in
conditioned space.
150(j)4: Solar water -heating systems and/or collectors are certified by the Solar Rating and Certification Corporation.
EnergyPro 5.1 by EnergySoft User Number: 2655 RunCode: 2012-01-25T17:20:26 ID: Page 11 of 14
MANDATORY MEASURES SUMMARY: Residential (Page 2 of 3 MF -1 R
Project Name
Date
Radi Residence
1 1/25/2012
§150(m)1: All air -distribution system ducts and plenums installed, are sealed and insulated to meet the requirements of CMC Sections
601, 602, 603, 604, 605 and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minimum installed level of R-
4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the
applicable requirements of UL 181, UL 181 A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is
used to seal openings reater than 1/4 inch, the combination of mastic and either mesh or tape shall be used
§150(m)1: Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed
sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may
contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area
of the ducts.
§150(m)2D: Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes
unless such tape is used in combination with mastic and draw bands.
150(m)7: Exhaust fans stems have back draft or automatic dampers.
§150(m)8: Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated
dampers.
§150(m)9: Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar
radiation that can cause degradation of the material.
150 m 10: Flexible ducts cannot have porous inner cores.
§150(o): All dwelling units shall meet the requirements of ANSI/ASHRAE Standard 62.272007 Ventilation and Acceptable Indoor Air
Quality in Low -Rise Residential Buildings. Window operation is not a permissible method of providing the Whole Building Ventilation
required in Section 4 of that Standard.
Pool and Spa Heating Systems and Equipment Measures:
§114(a): Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency
Regulations; an on-off switch mounted outside of the heater; a permanent weatherproof plate or card with operating instructions; and
shall not use electric resistance heating ora pilot light.
§114(b)1: Any pool or spa heating equipment shall be installed with at least 36" of pipe between filter and heater, or dedicated suction
and return lines or built-up connections for future solar heating.
114(b)2: Outdoor pools ors as that have a heat pump or gas heater shall have a cove.
§114(b)3: Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or
programmed to run only during off-peak electric demand periods.
150 : Residential pool systems orequipment meet the pump sizing, flow rate, i i.' ,'filters, and valve requirements of §150
Residential Lighting Measures:
§150(k)1: High efficacy luminaires or LED Light Engine with Integral Heat Sink has an`efficacy that is no lower than the efficacies
contained in Table 150-C and is not a low efficacy luminaire asspecified by §150(k)2.`1:
150(k)3: The wattage of permanently installed luminaires shall be determined asspecified by §130(d).
§150(k)4: Ballasts for fluorescent lamps rated 13 Watts or greater shall be electronic and shall have an output frequency no less than
20 kHz.
§150(k)5: Permanently installed night lights and night lights integral to a permanently installed luminaire or exhaust fan shall contain
only high efficacy lamps meeting the minimum efficacies contained in Table 150-C and shall not contain a line -voltage socket or line -
voltage lamp holder; OR shall be rated to consume no more than five watts of power as determined by §130(d), and shall not contain a
medium screw -base socket.
150(k)6: Lighting integral to exhaust fans, in rooms other than kitchens, shall meet the applicable requirements of §150(k).
150(k)7: All switching devices and controls shall meet the requirements of §150(k)7.
§150(k)8: A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy.
EXCEPTION: Up to 50 watts for dwelling units less than or equal to 2,500 ft2 or 100 watts for dwelling units larger than 2,500 ft2 may be
exempt from the 50% high efficacy requirement when: all low efficacy luminaires in the kitchen are controlled by a manual on occupant
sensor, dimmer, energy management system (EMCS), or a multi -scene programmable control system; and all permanently installed
luminaries in garages, laundry rooms, closets greater than 70 square feet, and utility rooms are high efficacy and controlled by a
manual -on occupant sensor.
§150(k)9: Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of
illuminated cabinet.
EnergyPro 5.1 by EnergySoft User Number: 2655 RunCode: 2012-01-25717:20:26 ID: Page 12 of 14
MANDATORY MEASURES SUMMARY: Residential :• (Page 3 of 3 MF -1 R
Project Name
Date
Radi Residence
1/25/2012
§150(k)10: Permanently installed luminaires in bathrooms, attached and detached garages, laundry rooms, closets and utility rooms
shall be high efficacy.
EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided.that they are controlled by a manual -on
occupant sensor certified to comply with the applicable requirements of §119.
EXCEPTION 2: Permanently installed low efficacy luminaires in closets less than 70 square feet are not required to be controlled by a
manual -on occupancy sensor.
§150(k)l 1: Permanently installed luminaires located in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms,
closets, and utility rooms shall be high efficacy luimnaires. EXCEPTION 1: Permanently installed low efficacy luminaires shall be
allowed provided they are controlled by either a dimmer switch that complies with the applicable requirements of §119, or by a manual -
on occupant sensor that complies with the applicable requirements of §119. EXCEPTION 2: Lighting in detached storage building less
than 1000 square feet located on a residential site is not required to comply with §150 k 11.
§150(k)12: Luminaires recessed into insulated ceilings shall be listed for zero clearance insulation contact (IC) by Underwriters
Laboratories or other nationally recognized testing/rating laboratory; and have a label that certifies the lumiunaire is airtight with air
leakage less then 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; and be sealed with a gasket or caulk between
the luminaire housing and ceiling.
§150(k)13: Luminaires providing outdoor lighting, including lighting for private patios in low-rise residential buildings with four or more
dwelling units, entrances, balconies, and porches, which are permanently mounted to a'residential building or to other buildings on the
same lot shall be high efficacy. EXCEPTION 1: Permanently installed outdoor low efficacy luminaires shall be allowed provided that
they are controlled by a manual on/off switch, a motion sensor not having an override or;bypass switch that disables the motion sensor,
and one of the following controls: a photocontrol not having an override or bypass switch'that disables the photocontrol; OR an
astronomical time clock not having an override or bypass switch that disables the astronomical time clock; OR an energy management
control system (EMCS) not having an override or bypass switch that allows the luminaire to be always on EXCEPTION 2: Outdoor
luminaires used to comply with Exception to §150(k)13 may be controlled by a temporary override switch which bypasses the motion
sensing function provided that the motion sensor is automatically reactivated within six hours. EXCEPTION 3: Permanently installed
luminaires in or around swimming pool, water features, or other location subject to Article 680 of the California Electric Code need not
be high efficacy luminaires.
§150(k)14: Internally illuminated address signs shall comply with Section 148; OR not contain a screw -base socket, and consume no
more than five watts of power as determined according to §130(d).
§150(k)15: Lighting for parking lots and carports with a total of for 8 or more vehicles per site shall comply with the applicable
requirements in Sections 130, 132, 134, and 147. Lighting for parking garages for 8 or more vehicles shall comply with the applicable
requirements of Sections 130, 131, 134, and 146.
§150(k)l6: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more
dwelling units shall be high efficacy luminaires. EXCEPTION: Permanently installed low efficacy luminaires shall be allowed provided
that they are controlled by an occupant sensors certified to comply with the applicable requirements of 119.
•i
EnergyPro 5.1 by EnergySofr User Number: 2655 Run Code: 2012-01-25T17:20:26','. ID: Page 13 of 14
HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY
Project Name
Radi Residence
Date
1/25/2012
System Name
Existing
Floor Area
2,880
ENGINEERING CHECKS
SYSTEM LOAD
Number of Systems
2
COIL
CFM
Total Room Loads 3,048
Return Vented Lighting
Return Air Ducts
Return Fan
Ventilation 0
Supply Fan
Supply Air Ducts
TOTAL SYSTEM LOAD
COOLING
PEAK COIL HTG.
PEAK
Heating System
Sensible
Latent CFM
Sensible
Output per System
47,500
50,001
4,331 1,099
42,055
Total Output Btuh
95,000
0
Output Btuh/s ft
33.0
5,180
2,578
Cooling System
0
0
Output per System
47,000
0
0 0
0
Total Output Btuh
94,000
0
4,331
0
Total Output Tons
7.8
1 5,180
2,578
Total Output Btuh/s ft
32.6
Total Output s ft/Ton
367.7
1 60,360
47,211
Air System
CFM per System
1,600
HVAC EQUIPMENT SELECTION
Airflow cfm
3,200
CARRIER 50HS-048 --- 301- 62,860 22,894
59,334
Airflow cfm/s ft
1.11
10.0 kW Supplemental Electric
68,260
Airflow cfm/Ton
408.5
Outside Air %
0.0 %
Total Adjusted System Output 1 62,860 22,894
(Adjusted for Peak Design conditions)
TIME OF SYSTEM PEAK Aug 3P M
127,594
Outside Air cfm/s ft 0.00
Note: values above given at ARI conditions
Jan 1 AM
HEATING SYSTEM PSYCHROMETRICS
jAirstream Temperatures at Time of Heating Peak
26 OF
No
Outside Air
0 cfm
69 OF
69 OF 87 OF 107 OF 107 OF
Heating Coil Aux. Heat Coil Supply Fan
3,200 cfm 106 F
ROOM o
70 OF
COOLING SYSTEM PSYCHROMETICS Airstream Temperatures at Time of Cooli ng Peak
112/78°F
Outside Air
0 cfm
80/67°F
80/67°F 61/60°F 61/60°F ,
Cooling Coil Supply Fan 63 / 61 OF
3,200 cfm ,
53.8% ROOM
78/66°F
EnergyPro5.1 by EnergySoff
User Number: 2655 RunCode: 2012-01-25717:20:26 /D: Page 14 of 14
I