BCOM2019-0012 2/3 Title 24I BUILDING ENERGY ANALYSIS REPORT I
PROJECT:
JADABUG KIDS BOUTIQUE (MECH. ONLY)
78377 HWY 111
LA QUI NTA, CA 92253
Project Designer:
GLS ARCHITECTURE GROUP INC.
74991 JONI DR #9
PALM DESERT, CA 92260
760 340.3528
Report Prepared by:
Armando Chavez
44890 SEELEY
LA QUI NTA, CA 92253
760 278.1840
Job Number:
19 - GLS - 019/020
Date:
4/15/2019
CITY OF LP. OUINTA
BUILDING DIVISION
REVIEWED FOR
CODE
COMPLIANCE
AlfthW--i-BY
DATE
1�wi�ai� • c'r�iZ
2 of 3
RECEIVED
HI
CIT''' OF LA QUINTA
COMMUNITY EVEMIPMF'
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2016 Building Energy Efficiency Standards.
This program developed by EnergySoft Software — www.energysoft.com.
M
TABLE OF CONTENTS
Cover Page 1
Table of Contents 2
Form MCH -01-E Prescriptive - Mechanical Systems 3
Form MCH -02-E Prescriptive - HVAC System Requirements 7
Form MCH -03-E Prescriptive - Mechanical Ventilation and Reheat 10
Form MCH -04-E Prescriptive - Required Acceptance Tests 12
Form MCH -05-E Prescriptive - Requirements for Packaged Single Zc 15
Form MCH -07-E Prescriptive - Fan Power Consumption 17
7.1
Jab Nur: k: l' ID: 19 - GLS - 019/020
User Number: 20648
STATE OF CALIFORNIA
MECHANICAL SYSTEMS
CEC-NRCC-MCH-01-E (Revised OV16) CALIFORNIA ENERGY COMMISSION
CERTIFICATE OF COMPLIANCE NRCC-MCH-01-E
Mechanical Systems (Page 1 of 4)
Project Name: JADABUG KIDS BOUTIQUE (MECH. ONLY)
Date Prepared: 4/15/2019
A. MECHANICAL COMPLIANCE DOCUMENTS & WORKSHEETS (check box if worksheet is included)
For detailed instructions on the use of this and all Energy Efficiency Standards compliance forms, refer to the 2016 Nonresidential Manual
Note: The Enforcement Agency may require all forms to be incorporated onto the building plans.
YES NO JComp. Doc./Worksheet #
Title
0 ❑
INRCC-MCH-01-E (Part 1 of 3)
Certificate of Compliance, Declaration. Required on plans for all submittals.
0 ❑
NRCC-MCH-01-E (Part 2 of 3)
Certificate of Compliance, Required Acceptance Tests (MCH -02-A to 11-A). Required on plans for all submittals.
❑ ❑
NRCC-MCH-01-E (Part 3 of 3)
Certificate of Compliance, Required Acceptance Tests (MCH -12-A to 18-A). Required on plans where applicable.
El1:1INRCC-MCH-02-E
(Part 1 of 2)
Mechanical Dry Equipment Summary is required for all submittals with Central Air Systems. It is optional on plans.
0 ❑
NRCC-MCH-02-E (Part 2 of 2)
Mechanical Wet Equipment Summary is required for all submittals with chilled water, hot water or condenser water
systems. It is optional on plans.
El
0 ❑
NRCC-MCH-03-E
Mechanical Ventilation and Reheat is required for all submittals with multiple zone heating and cooling systems. It is
optional on pians.
--- ....
Power Consumption of Fans. Required on plans where applicable —._ ..-........
Power Consumption of Fans, Declaration. Required on plans where applicable
INRCC-MCH-07-E (Part 1 of 2)
❑ ❑
INRCC-MCH-07-E (Part 2 of 2)
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance
January 2016
STATE OF CALIFORNIA
MECHANICAL SYSTEMS
CEG-'NRCC-MCH-01-E (Revised 01116)
CERTIFICATE OF COMPLIANCE
Mechanical Systems
Project Name: JADABUG KIDS BOUTIQUE (MECH. ONLY)
Date Prepared: 4/15/2019
NRCC-MCH-01-E
(Page 2 of 4)
B. MECHANICAL HVAC ACCEPTANCE FORMS (check box for required compliance documents)
Test Performed By:
Designer:
This compliance document is to be used by the designer and attached to the plans. Listed below are all the acceptance tests for HVAC systems. The designer is required to check the applicable
boxes for all acceptance tests that apply and list all equipment that requires an acceptance test. All equipment of the same type that requires a test, list the equipment description and the number
of systems.
Installing Contractor:
The contractor who installed the equipment is responsible to either conduct the acceptance test themselves or have a qualified entity run the test for them. If more than one person has
responsibility for the acceptance testing, each person shall sign and submit the Certificate of Acceptance applicable to the portion of the construction or installation for which they are responsible.
Enforcement Agency:
Plancheck —The NRCC-MCH-01-E compliance document is not considered a completed document and is not to be accepted by the building department unless the correct boxes are checked.
Inspector - Before occupancy permit is granted all newly installed process systems must be tested to ensure proper operations.
Test Description MCH -02-A MCH -03-A MCH -04-A MCH -05-A MCH -06-A MCH -07-A I MCH -08-A MCH -09-A MCH -10-A MCH -11-A
Air
Demand
Hydronic
Automatic
Equipment
# of
Outdoor
Single Zone
Economizer
Control
Supply Fan
Valve Leakage
Supply Water System
Demand Shed
Requiring Testing
Units
Air
Distribution
Unitary
Controls
Ventilation
VAV
Test
Temp. Reset Variable Flow
Control
or Verification
Ducts
(DCV)
Control
7.5 TON
p
e
❑
0
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
El
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
, ❑
❑
❑
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016
STATE OF CALIFORNIA
MECHANICAL SYSTEMS
CERTIFICATE OF COMPLIANCE
Mechanical Systems
Project Name: JADABUG KIDS BOUTIQUE (MECH. ONLY)
no
CALIFORNIA ENERGY COMMISSION
NRCC-MCH-01-E
(Page 3 of 4)
Date Prepared: 4/15/2019
C. MECHANICAL HVAC ACCEPTANCE FORMS (check box for required compliance documents)
Test Performed By:
Designer:
This compliance document is to be used by the designer and attached to the plans. Listed below are all the acceptance tests for HVAC systems. The designer is required to check the applicable
boxes for all acceptance tests that apply and list all equipment that requires an acceptance test. All equipment of the same type that requires a test, list the equipment description and the number
of systems. _
Installing Contractor:
The contractor who installed the equipment is responsible to either conduct the acceptance test themselves or have a qualified entity run the test for them. If more than one person has
responsibility for the acceptance testing, each person shall sign and submit the Certificate of Acceptance applicable to the portion of the construction or installation for which they are responsible.
Enforcement Agency:
Plancheck— The NRCC-MCH-01-E compliance document is not considered a completed document and is not to be accepted by the building department unless the correct boxes are checked.
Inspector - Before occupancy permit is granted all newly installed process systems must be tested to ensure proper operations.
Test Description
MCH -12 -A MCH -13-A MCH -14-A MCH -15 A MCH -16-A MCH -17-A MCH -18-A
Equipment Fault Detection & Automatic Fault Distributed Energy Thermal Energy Supply Air Condenser Water
Requiring Testing # of Diagnostics for DX Detection & Storage DX AC Storage (TES) Temperature Reset ECMS
Units Diagnostics for Air & Systems Systems Controls Reset Controls
or Verification Units Zone y
7.5 TON 1 ❑ ❑ ❑ ❑ ❑ ❑
❑ ❑ ❑ ❑ ❑ ❑ ❑
❑ ❑ ❑ ❑ ❑ ❑ ❑
❑ ❑ ❑ ❑ ❑ ❑ ❑
❑ ❑ ❑ ❑ ❑ ❑ ❑
❑ ❑ ❑ ❑ ❑ ❑ ❑
❑ ❑ ❑ ❑ ❑ ❑ ❑
❑ ❑ ❑ ❑ ❑ ❑ ❑
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016
STATE OF CALIFORNIA
MECHANICAL SYSTEMS
CEC-NRCC-MCH-01-E (Revised 01116)
CERTIFICATE OF COMPLIANCE
Mechanical Systems
Protect Name: JADABUG KIDS BOUTIQUE (MECH
ONLY)
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name: Documentation Author Signature
Armando Chavez
Company: Signature Date: 4/15/2019
Date Prepared: 4/15/2019
Address' 44890 SEELEY CEA/ HERS Certification Identification (if applicable):
City/State/Zip: LA QUINTA, CA 92253 Phone: 760 278.1840
N RCC -MCH -01-E
(Page 4 of 4)
i RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design identified on this Certificate of Compliance (responsible
designer).
3. The energy features and performance specifications, materials, components, and manufactured devices for the building design or system design identified on this Certificate of Compliance
conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of Regulations.
4. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application.
5. 1 will ensure that a completed signed copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the building, and made available to the enforcement
agency for all applicable inspections. I understand that a completed signed copy of this Certificate of Compliance is required to be included ith the documentation the builder provides to the
building owner at occupancy. -
Responsible Designer Name: Responsible Designer Signature:
RUBEN ROMERO
Company: GLS ARCHITECTURE GROUP INC. I Date Signed: 4-1
Address: 74991 JONI DR #9
City/State/Zip: PALM DESERT, CA 92260
License:
Phone:
760 340.3528
January 2016
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance
STATE OF CALIFORNIA
HVAC DRY & WET SYSTEM REQUIREMENTS
CERTIFICATE OF COMPLIANCE
HVAC Dry & Wet System Requirements
ProjectName: ,IADAF3IIG IDS ROUTIOU
Date Prepared:
N RCC -MCH -02-E
(Page 1 of 3)
A. Equipment Tags and System Description' - Dry Systems (ALT) - AC -
MANDATORY MEASURES T-24 Sections Reference to the Requirements in the Contract Documentsz
Heating Equipment Efficiency 110.1 or 110.2(a) M1.1
Cooling Equipment Efficiency 110.1 or 110.2(a)
HVAC or Heat Pump Thermostats 110.2(b), 110.2(c)
Furnace Standby Loss Control 110.2(d)
Low Leakage AHUs 110.2(f) Mi 1
Ventilation 120.1(b) AA W
Demand Control Ventilation 120.1(c)4 MiA
Occupant Sensor Ventilation Control6 120.1(c)5, 120.2(e)3
Shutoff and Reset Controls 120.2(e)
Outdoor Air and Exhaust Damper Control 120.2(f)
Isolation Zones 120.2(g) MiA
Automatic Demand Shed Controls 120.2(h) Moll
Economizer FDD 120.2(i) mii
Duct Insulation 120.4 mil
PRESCRIPTIVE MEASURES mil
Equipment is sized in conformance with 140.4(a & b) Y Y/N Y/N Y/N
140.4(a & b) _
Supply Fan Pressure Control 140.4(c) MIA
Simultaneous Heat/Cool$ 140.4(d) M1.1
Economizer 140.4(e) M1.1
Heat and Cool Air Supply Reset 140.4(f) M1.1
Electric Resistance Heating 140.4(g) M1.1
Duct Leakage Sealing and Testing 140.4(1) M1.1
Notes:
1. Provide equipment tags (e.g. AHU 1 to 10) and system description (e.g. Single Duct VAV reheat) as appropriate. Multiple units
with common requirements can be grouped together.
2. Provide references to plans (i.e. Drawing Sheet Numbers) and/or specifications (including Section name/number and relevant
paragraphs) where each requirement is specified. Enter "N/A" if the requirement is not applicable to this system.
3. The referenced plans and specifications must include all of the following information: equipment tag, equipment nominal
capacity, Title 24 minimum efficiency requirements, and actual rated equipment efficiencies. Where multiple efficiency
requirements are applicable (e.g. full- and part -load) include all. Where appliance standards apply (110.1), identify where
equipment is required to be listed per Title 20 1601 et seq.
4. Identify where the ventilation requirements are documented for each central HVAC system. Include references to both central
unit schedules and sequences of operation. If one or more spaces is naturally ventilated identify where this is documented in
the plans and specifications. Multiple zone central air systems must also provide a MCH -03-E compliance document.
5. If one or more spaces has demand controlled ventilation identify where it is specified including the sensor specifications and
the sequence of operation.
6. If one or more space has occupant sensor ventilation control identify where it is specified including the sensor specifications
and the sequence of operation
7. If the system is DDC identify the sequences for the system start/stop, optimal start, setback (if required) and setup (if required).
For all systems identify the specification for the thermostats and time clocks (if applicable).
8. Identify where the heating, cooling and deadband airflows are scheduled for this system. Include a reference to the
specification of the zone controls. Provide a MCH -03-E compliance document.
9. Enter N/A if there is no electric heating. If the system has electric heating indicate which exception to 140.4(8) applies.
10. If duct leakage sealing and testing is required, a MCH -04-A compliance document must be submitted.
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016
STATE OF CALIFORNIA
HVAC DRY & WET SYSTEM REQUIREMENTS
Fns
CEC-NRCC-MCH-02-E Revised 01116 _... CALIFORNIA ENERGY COMMISSION
CERTIFICATE OF COMPLIANCE NRCC-MCH-02-E
HVAC Dry & Wet System Requirements (Page 2 of 3)
Project Name: JADABUG KIDS BOUTIQUE (MECH. ONLY) DatePrepared: 4/15/2019
B. Equipment Tags and System Description' — Wet Systems
MANDATORY MEASURES
T-24 Sections
Reference to the Requirements in the Contract DocumenW
Heating Hot Water Equipment Efficiency3
110.1
Cooling Chilled and Condenser Water
110.1, 140.4(i)
3
Equipment Efficiency
Open and Closed Circuit Cooling Towers
110.2(e) 1
conductivity or flow -based controls
Open and Closed Circuit Cooling Towers
Maximum Achievable Cycles of
110.2(e) 2
Concentration (LSI )6
110.2(e) 3
Open and Closed Circuit Cooling Towers
Flow Meter with analog output
Open and Closed Circuit Cooling Towers
110.2(e) 4
Overflow Alarm
Open and Closed Circuit Cooling Towers
110.2(e) 5
Efficient Drift Eliminators
Pipe Insulation
120.3
PRESCRIPTIVE MEASURES
Cooling Tower Fan Controls 140.4(h)2, 140.4(h)5 Y/N Y/N Y/N
Cooling Tower Flow Controls 140.4(h)3
Centrifugal Fan Cooling Towers 140.4(h)4
Air -Cooled Chiller Limitation 140.46)
Variable Flow System Design 140.4(k)
Chiller and Boiler Isolation 140.4(k)
CHW and HHW Reset Controls 140.4(k)
WLHP Isolation Valves 140.4(k)
VSD on CHW, CW & WLHP Pumps >5HP 140.4(k)
DP Sensor Location 140.4(k)
Notes:
1. Provide equipment tags (e.g. CH 1 to 3) or system description (e.g. CHW loop) as appropriate. Multiple units with common
requirements can be grouped together.
2. Provide references to plans (i.e. Drawing Sheet Numbers) and/or specifications (including Section name/number and relevant
paragraphs) where each requirement is specified. Enter "N/A" if the requirement is not applicable to this system.
3. The referenced plans and specifications must include all of the following information: equipment tag, equipment nominal
capacity, Title 24 minimum efficiency requirements, and actual rated equipment efficiencies. Where multiple efficiency
requirements are applicable (e.g. full- and part -load) include all. For chillers operating at non-standard efficiencies provide the
Kadj values. For chillers also note whether the efficiencies are Path A or Path B.
4. Identify if cooling towers have propeller fans. If towers use centrifugal fans document which exception is used.
5. If air-cooled chillers are used, document which exceptions have been used to comply with 140.4(j) and the total installed design
capacity of the air-cooled chillers in the chilled water plant.
Identify the existence of a completed MCH -06-E when open or closed circuit cooling towers are specified to be installed,
otherwise enter "N/A".
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016
STATE OF CALIFORNIA
HVAC SYSTEM REQUIREMENTS
10", � -
CE C-NRCC-NICH-02-E (Revised 03)14) CALWORNIA ENERGY COMMISSION T
CERTIFICATE OF COMPLIANCE NRCC-MCH-02-E
HVAC Wet System Requirements (Page 3 of 3)
Project Name: JADABUG KIDS BOUTIQUE (MECH. ONLY) DatePrepared: 4/15/2019
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
Armando Chavez
Documentation Author Signature:
Signature Date: 4/15/2019
CEA/ HERS Certification Identification (if applicable):
Company:
Address: 44890 SEELEY
City/State/Zip:
LA QUINTA, CA 92253
Phone: 760 278.1840
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design
identified on this Certificate of Compliance (responsible designer).
3. The energy features and performance specifications, materials, components, and manufactured devices for the building design or system
design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
4. The building design features or system design features identified on this Certificate of Compliance are consistent with the information
provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement
agency for approval with this building permit application.
5. 1 will ensure that a completed signed copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the
building, and made available to the enforcement agency for all applicable inspections. I understand that a coml t
ped signed copy of this
Certificate of Compliance is required to be included with the documentation the builder provides to uild' owner occupancy.
Responsible Designer Name: RUBEN ROMERO
Responsible Designer Signature:
Company- GLS ARCHITECTURE GROUP INC.
Date Signed:
Address: 74991 JONI DR #9
License:
Phone` 760 340.3528
City/state/zip: PALM DESERT, CA 92260 _
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016
STATE OF CALIFORNIA
MECHANICAL VENTILATION AND REHEAT
r,
[% �1
CEC-NRCC-MCH-03.E (Revised 05/16) _ CALIFORNIA ENERGY COMMISSION
CERTIFICATE OF COMPLIANCE NRCC-MCH-03-E
Mechanical Ventilation & Reheat (Page 1 of 2)
Project Name: JADABUG KIDS BOUTIQUE (MECH. ONLY) Date Prepared: 4/15/2019
A. Mechanical Ventilation and Reheat
ROOM
VAV Reheated Primary
VAV Deadband
ACTUAL DESIGN INFO (FROM EQUIPMENT SCHEDULES, ETC)
AREA BASIS
OCCUPANCY BASIS
BASIS
MINIMUM
Air CFM
Primary Air CFM
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
¢
r
a
>-
¢ n
>-�:
a°
U
o
w
w
a
¢
a
J
o
Z
°
m,
m
O
12
Q
w
�.
Z L-
(D
O
¢
H r
'^ x
>
z <
T2 ?j
fG a O
cU
c z
[z 6
w
a z
w
Q
Z
O¢ ,-.
wN
C
w
a
}
m
w
a
w
n.
Z
¢
a
w 2i
> O
iJ
¢- 00 _
g n V ¢
z
w
w J
O
p
m ?'
L� O
vi O
m
a
Z Z U
a n
2 ¢ U
e-
2 v
}
-`-
LL u
s
D¢ '."
LL
g
U
O
¢
wa
U O
Z u
u
U p
Z
o
s U
O
w Q
V CX ,V..
a"
7 V
a
O
D O
w U U
¢>
L7 °C v
O
>
o>
l7
np
0 u�Q`r
vra
L7
v,a
z
z
Z
p
V
z
z
�
�
�p
�
w Q
�
�
cn¢
a1
x
�
mg
¢
¢
U
N
o U
o
d
u
Z
u
d
o a
El
ElPass
Pass
(E) -T.I
1,528
0.15
229
2.2
75.0
164
229
❑ Fail
❑ Fail
11 Fail
X N/A
X N/A
❑ Pass
❑ Pass
Total
229
❑ Pass
❑ Fail
❑ Fail
❑ Fail
❑ N/A
❑ N/A
❑ Pass
❑ Pass
Pass
(N) T. 1.
2,390
0.15
359
3.4
75.0
256
359
❑ Fail
❑ Fail
❑ Fail
N/A
X N/A
❑ Pass
❑ Pass
El Pass
Total
359
❑ Fail
❑ Fail
❑ Fail
❑ N/A
❑ N/A
❑ Pass
❑ Pass
❑ Pass
❑ Fail
❑ Fail
❑ Fail
❑ N/A
❑ N/A
❑ Pass
❑ Pass
❑ Pass
❑ Fail
❑ Fail
❑ Fail
❑ N/A
❑ N/A
❑ Pass
❑ Pass
❑ Pass
❑ Fail
❑ Fail
❑ Fail
❑ N/A
❑ N/A
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance May 2016
STATE OF CALIFORNIA
MECHANICAL VENTILATION AND REHEAT
f1
CEC-NRCC-MCH•03-E (Revised 05/16) CALIFORNIA ENERGY COMMISSION �
CERTIFICATE OF COMPLIANCE NRCC-MCH-03-E
Mechanical Ventilation & Reheat (Page 2 of 2)
Project Name: JADABUG KIDS BOUTIQUE (MECH. ONLY) Date Prepared: 4/15/2019
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT _
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name: Armando Chavez Documentation Author Signature:
Company: Signature Date: 4/15/2019
Address: 44890 SEELEY
CEA/ HERS Certification Identification (if applicable):
City/State/Zip: LA QUINTA, CA 92253
Phone' 760 278.1840
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design identified on this Certificate of Compliance (responsible
designer).
3. The energy features and performance specifications, materials, components, and manufactured devices for the building design or system design identified on this Certificate of Compliance
conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of Regulations.
4. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application.
5. 1 will ensure that a completed signed copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the building, and made available to the enforcement
agency for all applicable inspections. I understand that a completed signed copy of this Certificate of Compliance is required to be included with the documentation the builder provides to the
building owner at occupancy. _ �1
Responsible Designer Name: RUBEN ROMERO Responsible Designer Signature:
Company: GLS ARCHITECTURE GROUP INC. Date signed:
J
Address:
74991 JONI DR #9
License:
... ........... ....
Phone. 760 340.3528
- -..
City/State/Zip: PALM DESERT, CA 92260
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance May 2016
STATE OF CALIFORNIA
REQUIRED ACCEPTANCE TESTS
;.EG-NRCC-MCH-04-E {Revised 01/15k CALIFORNIA ENERGY COMMISSION T
CERTIFICATE OF COMPLIANCE NRCC-MCH-04-E
Required Acceptance Tests (Page 1 of 3)
Project Name: JADABUG KIDS BOUTIQUE (MECH. ONLY) Date Prepared: 4/15/2019
A. MECHANICAL COMPLIANCE FORMS & WORKSHEETS
(indicate if worksheet is included)
For detailed instructions on the use of this and all Energy Standards compliance documents, refer to the 2016 Nonresidential Manual
Note: The Enforcement Agency may require all compliance documents to be incorporated onto the building plans. The NRCC-MCH-04-E and NRCC-MECH-05-E are alternative
compliance documents to NRCC-MCH-01-E, NRCC-MCH-02-E and NRCC-MCH-03-E for projects using only single zone packaged HVAC systems.
j YES NO Form I Title
✓ I I NRCC-MCH-04-E (1 of 2)
✓ NRCC-MCH-04-E (2 of 2)
✓ NRCC-MCH-05-E (1 of 2)
✓ I I NRCC-MCH-05-E (2 of 2)
Certificate of Compliance. Required on plans when used.
Mechanical Acceptance Tests. Required on plans when used.
HVAC Prescriptive Requirements. It is required on plans when used.
Mechanical SWH Equipment Summary is required for all submittals with service water heating, pools or spas. It is
required on plans where applicable.
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016
STATE OF CALIFORNIA
REQUIRED ACCEPTANCE TESTS
w'5
CERTIFICATE OF COMPLIANCE NRCC-MCH-04-E
Required Acceptance Tests (Page 2 of 3)
Project Name: JADABUG KIDS BOUTIQUE (MECH. ONLY) Date Prepared: 4/15/2019
Designer:
This compliance document is to be used by the designer and attached to the plans. Listed below are all the acceptance tests for mechanical systems. The designer is required to
check the applicable boxes by all acceptance tests that apply and list all equipment that require an acceptance test. If all equipment of a certain type requires a test, list the
equipment description and the number of systems. The NA number designates the Section in the Appendix of the Nonresidential Reference Appendices Manual that describes
the test. Since this compliance document will be part of the plans, completion of this section will allow the responsible party to budget for the scope of work appropriately.
Enforcement Agency:
Systems Acceptance. Before occupancy permit is granted for a newly constructed building or space, or a new space -conditioning system serving a building or space is operated
for normal use, all control devices serving the building or space shall be certified as meeting the Acceptance Requirements for Code Compliance.
Systems Acceptance. Before occupancy permit is granted. All newly installed HVAC equipment must be tested using the Acceptance Requirements.
The NRCC-MCH-04-E compliance document is not considered a completed document and is not to be accepted by the building department unless the correct boxes are checked.
The equipment requiring testing, person performing the test (Example: HVAC installer, TAB contractor, controls contractor, PE in charge of project) and what Acceptance test
must be conducted. The following checked -off forms are required for ALL newly installed and replaced equipment. In addition a Certificate of Acceptance documents shall be
submitted to the building department that certifies plans, specifications, installation certificates, and operating and maintenance information meet the requirements of Section
10-103(b) and Title 24 Part 6. The building inspector must receive the properly filled out and signed compliance documents before the building can receive final occupancy.
_ _ ...... ...........
Test Description MCH -02-A MCH -03-A MCH -04-A MCH -05-A I MCH -06-A MCH -07-A MCH -11-A MCH -12-A MCH -14-A MCH -18-A Test Performed By:
_...............
Equipment Demand Automatic Distributed Energy
Requiring Single ! Air Control Demand FDD for Energy Management
Testing or I # of Outdoor Zone
Verification ; Units Air Unitan
7.5 TON
Distribution Economizer Ventilation Supply Shed Packaged Storage DX Control
Ducts Controls (DCV) Fan VAV Control DX Units AC Systems System
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016
STATE OF CALIFORNIA
REQUIRED ACCEPTANCE TESTS
-� "0-1-
CEC-NRCC-MCN-04•E Revised 01116 CALIFORNIA ENERGY COMMISSION
CERTIFICATE OF COMPLIANCE NRCC-MCH-04-E
Required Acceptance Tests (Page 3 of 3)
Project Name:JADABUG KIDS BOUTIQUE (MECH. ONLY) Date Prepared: 4/15/2019
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name: Armando Chavez
Documentation Author Signature:
Signature Date: 4/15/2019
CEA/ HERS Certification Identification (if applicable):
Company:
Address: 44890 SEELEY
City/State/Zip: LA QUINTA, CA 92253
I
Phone: 760 278.1840
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design identified on this Certificate of Compliance (responsible
designer).
3. The energy features and performance specifications, materials, components, and manufactured devices for the building design or system design identified on this Certificate of Compliance
conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of Regulations.
4. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application.
5. 1 will ensure that a completed signed copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the building, and made available to the enforcement
agency for all applicable inspections. I understand that a completed signed copy of this Certificate of Compliance is required to be included with the documentation the builder provides to the
building owner at occupancy.
Responsible Designer Name: RUBEN ROMERO
Responsible Designer Signature: 00,
Date Signed: / /
Company:
GLS ARCHITECTURE GROUP INC.
Address: 74991 JONI DR #9
License:
City/State/Zip: PALM DESERT, CA 92260
Phone: 760 340.3528
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016
STATE OF CALIFORNIA
REQUIREMENTS FOR PACKAGED SINGLE ZONE UNITS
�,_
CEC-NRCC-MCH-05-E (Revised 01/15) CALIFORNIA ENERGY COMMISSION _
CERTIFICATE OF COMPLIANCE NRCC-MCH-05-E
Requirements for Packaged Single -Zone Units (Page 1 of 2)
Project Name:JADABUG KIDS BOUTIQUE (MECH. ONLY) Date PreparecIAM5%2019
Equipment Tag(s)1 ALT - AC
MANDATORY MEASURES T-24 Sections Requirement' As Scheduled Requirement' As Scheduled' Requirement' As Scheduled'
Heating Equipment Efficiency" 110.1 or 110.2(a) 3.30 COP 3.40 COP
Cooling Equipment Efficiency° 110.1 or 110.2(a) 11.0 EER 11.2 EER
Thermostats' 110.2(b), 110.2(c) Setback Setback
Furnace Standby Loss Control° 110.2(d)
Low Leakage AHU 110.2(f) NR none
Ventilation' 120.1(b) 359 256
Demand Control Ventilation ° 120.1(c)4 NR No
Occupant Sensor Ventilation Control' 120.1(c)5, 120.2(e)3
Shutoff and Reset ControW 120.2(e) Req Procirammable
Outdoor Air and Exhaust Damper Control 120.2(f) Req Auto
Automatic Demand Shed Controls 120.2(h) NK none
Economizer FDD 120.2(i) Keq
Duct Insulation 120.4 n/a none
PRESCRIPTIVE MEASURES
Equipment is sized in conformance with 140.4(a & b)
29,571 Btu/hr 53,713 Btu/hr
140.4 (a & b)
38,051 Btu/hr 74,596 Btu/hr
Economizer 140.4(e)
Reg Fixed Enth (Int
Electric Resistance Heatingl" 140.4(g)
No No
Duct Leakage Sealing and Testing." 140.4(1)
NR I No �
Notes:
1. Provide equipment tags (e.g. AC1 orAC1 to 10). Multiple units of the same make and model with the same application and accessories can be grouped together.
2. Enter the following information as appropriate: Unit Manufacturer, • Unit Model Number (including all accessories); Description of the unit (e.g. gas -pack or heat pump; rated heating capacity
(enter "N/A" if no heating); and, rated cooling capacity (enter "N/A" if no cooling). For unit capacities include the units (e.g. kBtuh or tons).
3. For each requirement enter the minimum requirement from the Standard In the left column (under "Standard Requirement"). In the right column (under "As Scheduled") enter the value for
the units as specified.
4. Where there is more than one requirement (e.g. full and part load efficiency) enter both with the appropriate labels (e.g. COP and IEER).
5. In the left column identify the thermostatic requirements from the standard (e.g. programmable setback thermostat or heat pump with electric heat), . In the right column indicate the
capabilities of the thermostat as scheduled.
6. If the unit has a furnace which is rated at?225,000 Btuh of capacity, indicate the rated standby loss and ignition source (e.g. IID). If there is no furnace or the unit is rated for <225,000 Btuh
indicate "N/A".
7. In the left column, enter both the required ventilation value from Table 120.1A and for the number of occupants times 15 cfm/person. In the right column enter the actual minimum
ventilation as scheduled. If the space is naturally ventilated enter "N/A" in the left column and "the space is naturally ventilated" in the right column.
8. If the space is required to have either DCV or Occupant Sensor Ventilation Control indicate "required" in the left column (otherwise indicate "N/A" in the left column). If either DCV or Occupant
Sensor Ventilation Control is provided indicate "provided" in the right column (otherwise indicate "N/A" in the right column)
9. In the left column indicate the required time controls from the standard. In the right column identify the device that provides this functionality (e.g. EMCS or programmable timeclock).
10. Enter N/A if there is no electric heating. If the system has electric heating indicate which exception to 140.4(g) applies.
11. If duct leakage sealing and testing is required, a MCH -04-A compliance document must be submitted.
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016
STATE OF CALIFORNIA
REQUIREMENTS FOR PACKAGED SINGLE ZONE UNITS
CEC-NRCC-MCH-05-E (Revised 01118)
CERTIFICATE OF COMPLIANCE NRCC-MCH-05-E
Requirements for Packaged Single -Zone Units (Page 2 of 2)
Project Name: JADABUG KIDS BOUTIQUE (MECH. ONLY) Date Prepared: 4/15/2019
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name: Armando Chavez Documentation Author Signature:
Company: Signature Date: 4/15/2019
Address: 44890 SEELEY CEA/HERS Certification Identification (if applicable):
City/State/Zip: LA QUINTA, CA 92253 Phone` 760 278.1840
RESPONSIBLE PERSON'S DECLARATION STATEMENT
-----------------------
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design identified on this Certificate of Compliance (responsible
designer).
3. The energy features and performance specifications, materials, components, and manufactured devices for the building design or system design identified on this Certificate of Compliance
conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of Regulations.
4. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application.
5. 1 will ensure that a completed signed copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the building, and made available to the enforcement
agency for all applicable inspections. I understand that a completed signed copy of this Certificate of Compliance is required to be included with the documentation the builder provides to
the building owner at occupancy. /]z 4e
Responsible Designer Name: RUBEN ROMERO
Responsible Designer Signature:
company: GLS ARCHITECTURE GROUP INC-
......... ........................ _ _........-....._..-
Date Signed:
Address: 74991 JONI DR #9
License:
City/State/Zip: PALM DESERT, CA 92260
Phone: 760 340.3528
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016
STATE OF CALIFORNIA
FAN POWER CONSUMPTION
:EC•NRCC-MGH-07-E (Revised 01176) CALIFORNIA ENERGY GUMMI65IC]N
CERTIFICATE OF COMPLIANCE NRCC-MCH-07-E
Power Consumption of Fans Requirements (Page 1 of 2)
Project Name: JADABUG KIDS BOUTIQUE (MECH. ONLY) Date Prepared: 4/15/2019
A. Constant Volume Fan Systems
NOTE: Provide one copy of this worksheet for each fan system with a total fan system horsepower greater than 25 hp of Constant Volume Fan
Systems when using the Prescriptive Approach. See Power Consumption of fans §140.4(c).
01 02 03 04 05
EFFICIENCY PEAK WATTS
FAN DESCRIPTION DESIGN BRAKE I NUMBER OF A02 x A04 x 746 /
HP MOTOR DRIVE FANS (A03a x A03b)
(E) - AC- - Supply Fan 0.500 85.5% 100.0% 1.0 436
Exhaust Fan 0.025 85.5% 100.0% 1.0 31
B. Variable Air Volume Fan Systems I
NOTE: Provide one copy of this worksheet for each fan system with a total fan system horsepower greater than 25 hp of Variable Air Volume (VA V) 1
Systems when using the Prescriptive Approach. See Power Consumption of fans §140.4(c). J
01 02 03 04 05
EFFICIENCY PEAK WATTS
DESIGN BRAKE NUMBER OF
FAN DESCRIPTION B02 x B04 x 746 /
HP MOTOR DRIVE FANS (B03a x B03b)
C. Totals and Adjustments
FILTER PRESSURE ADJUSTMENT TOTAL FAN SYSTEM POWER (WATTS, SUM
Equation 140.4-A in §140.4(c) of the 01 COLUMN F)
Building Energy Efficiency
Standards. 02 SUPPLY DESIGN AIRFLOW
A) If filter pressure drop (SPa) is
greater than 1 inch W. C. or 245
Pascal then enter SPa on line 4.
Enter Total Fan pressure drop
across the fan (SPf) on line 5.
B) Calculate Fan Adjustment and
enter on line 6.
467 1 W
2,000 1 CFM
03 TOTAL FAN SYSTEM POWER INDEX (Row 1 / Row 2)1 0.234 W/CFM
in W.0 or
04 SPa
Pa
in W.0 or
05 SPf Pa
06 1 Fan Adjustment = 1-(SPa —1)/SPf
C) Calculate Adjusted Fan Power 07 I ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.234 W/CFM
Index and enter on row 7
1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for
VAV systems.
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016
STATE OF CALIFORNIA
FAN POWER CONSUMPTION
CEC•NRCC•MCH-07-E Revised 01116 CALIFORNIA ENERGY COMMISSION
CERTIFICATE OF COMPLIANCE NRCC-MCH-07-E
.............................................
Power Consumption of Fans Requirements (Page 1 of 2)
Project Name: JADABUG KIDS BOUTIQUE (MECH. ONLY) Date Prepared: 4/15/2019
A. Constant Volume Fan Systems
NOTE: Provide one copy of this worksheet for each fan system with a total fan system horsepower greater than 25 hp of Constant Volume Fan
Systems when using the Prescriptive Approach. See Power Consumption of fans §140.4(c).
01 _......_........_ 02 03 04 05
DESIGN BRAKE EFFICIENCY NUMBER OF PEAK WATTS
FAN DESCRIPTION HP FANS A02 x A04 x 746 /
MOTOR DRIVE (A03a x A03b)
(ALT) - AC- - Supply Fan 0.550 85.5% 100.0% i 1.01 480
B. Variable Air Volume Fan Systems
NOTE: Provide one copy of this worksheet for each fan system with a total fan system horsepower greater than 25 hp of Variable Air Volume (VAV)
Systems when using the Prescriptive Approach. See Power Consumption of fans §140.4(c).
01 02 i 03 04 05
EFFICIENCY PEAK WATTS
FAN DESCRIPTION DESIGN BRAKE NUMBER OF B02 x B04 x 746 /
HP MOTOR DRIVE FANS (B03a x B03b)
C. Totals and Adjustments
FILTER PRESSURE ADJUSTMENT TOTAL FAN SYSTEM POWER (WATTS, SUM
Equation 140.4-A in §140.4(c) of the 01 COLUMN F)
Building Energy Efficiency
Standards. 02 SUPPLY DESIGN AIRFLOW
A) If filter pressure drop (SPa) is 03 TOTAL FAN SYSTEM POWER INDEX (Row 1/ Row 2)1
greater than 1 inch W. C. or 245
Pascal then enter SPa on line 4. 04 SPa
Enter Total Fan pressure drop
across the fan (SPf) on line 5.
05 SPf
B) Calculate Fan Adjustment and
enter on line 6. �O6 Fan Adjustment= 1-(SPa —1)/SPf
480 1 W
3,000 1 CFM
0.160 W/CFM
in W.0 or
Pa
in W.0 or
Pa
C) Calculate Adjusted Fan Power 07 'ADJUSTED FAN POWER INDEX (Line 3 x Line 6)1 0.160 W/CFM
Index and enter on row 7
1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/cfm for Constant Volume systems or 1.25 W/cfm for
VAV systems.
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016
STATE OF CALIFORNIA
FAN POWER CONSUMPTION
CALIFORNIA ENERGY
CERTIFICATE OF COMPLIANCE NRCC-MCH-07-E
Power Consumption of Fans Requirements (Page 2 of 2)
Project Name: JADABUG KIDS BOUTIQUE (MECH. ONLY) Date Prepared:4/15/2019
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name: Armando Chavez
Documentation Author Signature:
Signature Date: 4/15/2019
CEA/ HERS Certification Identification (if applicable):
Company:
Address: 44890 SEELEY
City/State/Zip: LA QUINTA, CA 92253
phone` 760 278.1840
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design
identified on this Certificate of Compliance (responsible designer).
3. The energy features and performance specifications, materials, components, and manufactured devices for the building design or system
design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
4. The building design features or system design features identified on this Certificate of Compliance are consistent with the information
provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement
agency for approval with this building permit application.
5. 1 will ensure that a completed signed copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the
building, and made available to the enforcement agency for all applicable inspections. I understand that a com feted signed copy of this
Certificate of Compliance is required to be included with the documentation the builder provides to PI/buiJKng oWAer at occupancy.
Responsible Designer Name: RUBEN ROMERO
Responsible Designer Signature:
Company, GLS ARCHITECTURE GROUP INC.
Date Signed:
Address: 74991 JONI DR #9
License:
City/state/zip: PALM DESERT, CA 92260
phone` 760 340.3528
CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016