Loading...
Addendum 1 1 of 4 ADDENDUM NUMBER 1 TO: All Prospective Bidders and Plan Holders FROM: Ubaldo Ayón, Assistant Construction Manager DATE: June 29, 2022 SUBJECT: Project No. 2016-03G X-Park Landscaping and Irrigation Improvements The following shall be considered as incorporated into the project plans and specifications for the above referenced project. Portions of plans and specifications not specifically mentioned in this Addendum remain in force.  PROJECT SPECIFICATIONS Section 1210: Section 1210 is replaced; the following is a summary of the changes: • Bid Item 8: Quantity Updated • Bid Item 16: Description and Quantity Updated to Include all Concrete Curbs • Add Bid Item 28: Apply Stained Arrow per Caltrans Standard Plan A24A, Bike Lane Arrow, Three-part application Section 1500: Sheet 1500-2, Section 3.0, Liquidated Damages, replace first sentence of paragraph 1: As Reads It is agreed by the parties to the Contract that time is of the essence; and that in the case all work is not completed before or upon the expiration of the time limit set forth within Section 1300 Contract; Subsection 4, damage will be sustained by the City and it is, therefore, agreed that the Contractor will pay to the City an amount of $1,500 per work day. Is Amended to Read It is agreed by the parties to the Contract that time is of the essence; and that in the case all work is not completed before or upon the expiration of the time limit set forth within Section 1300 Contract; Subsection 4, damage will be sustained by the City and it is, therefore, agreed that the Contractor will pay to the City an amount of $1,500 per calendar day. 2 of 4 Section 3000: Sheet 3000-8, Section 4.4, Permits, Licenses and Inspection Fees, add the following sentence to the end of paragraph 1: The Contractor will be required to obtain a no-cost Building and Safety permit from the City of La Quinta. The Contractor will be required to request inspection from Building and Safety for the trash enclosure as outlined in the permit. Section 4000: Sheet 4000-4, Section 3.0, Traffic Control, replace the section: As Reads 3.0 TRAFFIC CONTROL (Base Bid Item 2) Traffic Control shall comply with Section 3000-4.1 these Bid Documents. Traffic Control shall be paid for at the contract lump sum (LS) basis as shown on the Bid Schedule. Monthly payments will be made on a pro-rata basis. No additional traffic control will be paid if the add alternate is selected. Is Amended to Read 3.0 WORKING HOURS, SITE CONTROL, AND TRAFFIC CONTROL (Base Bid Item 2) Traffic Control shall comply with Section 3000-4.1 these Bid Documents. X-Park is an active park with the following hours: June 1, 2022 – September 4, 2022 Monday & Tuesday: Closed Wednesday-Friday: 2:00pm-10:00pm Saturdays-Sundays 9:00am-9:00pm September 5, 2022 – June 1, 2023 Monday: Closed Tuesday-Friday: 12:00pm-9:00pm Saturdays-Sundays 9:00am-9:00pm Contractor may work within the fenced area during the times the X-Park is closed only. The Contractor may work outside the fence, in the parkway, and within the parking lot during regular construction hours as listed in the specifications. Concurrent work is encouraged. Contractor shall clean site of construction debris and properly store equipment by the end of each work day. Contractor shall protect all work and open trenches from the public at all times which may require fencing; in addition, Contractor shall install open trench signs, cones, or other protective devices. The use of caution tape tied to cones is not allowed as a means to close off an area. 3 of 4 Complying with Working Hours, Site Control, and Traffic Control shall be paid for at the contract lump sum (LS) basis as shown on the Bid Schedule under Traffic Control. Monthly payments will be made on a pro-rata basis. No additional traffic control will be paid if the add alternate is selected. Sheet 4000-9, Section 8.0, Concrete Removal and Construction, Add Sub-Section 8.1, Concrete Staining, after payment clause: 8.1 Concrete Staining Concrete staining shall conform to the manufacturer guidelines and as specified below. Concrete staining shall be performed with a three-part application: 1. Prep stencil area with EZ Etch, by Ameripolish. Contractor shall take care to only apply application within the stencil area. 2. Stain concrete within Stencil with ColorJuice E, by Ameripolish. Color shall be Walnut. 3. Seal concrete with X-Link, by Amipolish, with CA-29 Mini Safe Grip Non-Skid Additive mixed in, by Westcoat. Contractor shall take care to only apply application within the stencil area. Contractor shall provide a sample of the three-part application on concrete for the City’s approval prior to applying to final location. Contractor may provide sample on concrete designated within the project area to be removed. Sample shall be a minimum of 1’x1’. Apply Stained Arrow per Caltrans Standard Plan A24A, Bike Lane Arrow, Three-part application shall be paid for at the each (EA) contract price and no additional compensation will be allowed. Payment shall include full compensation for furnishing all labor, materials, tools, equipment, sample, and doing all work involved in applying concrete stain as specified and no additional compensation will be allowed therefore. Sheet 4000-12, Section 9.0, Asphalt Concrete and Placement of Base Material, Sub- Section 9.5, Measurement and Payment, remove the second paragraph as noted below: The contract Unit price paid per Square Foot of Remove and Construct 5.5” AC over 6.5” AB, CLQ STD. 195 includes full compensation for furnishing all labor, materials, tools, equipment, and incidentals, and for doing all the work involved in constructing and placing Asphalt Concrete Pavement, complete in place, including hauling, as shown on the plans, as specified in the Standard Specifications and these special provisions, and as directed by the engineer, and no additional compensation will be allowed therefore. 4 of 4 Sheet 4000-12, Section 10.0, Miscellaneous Metal Items, Add the following after second paragraph: Metal fencing shall be constructed to the dimensions, color, and shapes shown on the plans. Metal fencing shall be painted conforming to the provisions in Section 59, “Structural Steel Coatings”, of the State Specifications. Color shall be as shown on the plans to be approved by the City prior to the application. Sheet 4000-21, Section 12.0, Landscape and Irrigation, Sub-Section 801-5.1, General, add sentence after first sentence: All mainline shall be 1 ¼” schedule 40 pipe.  PROJECT PLANS The following changes are made to the plans: • Sheet 3: Stained Concrete Arrow Added to Plan • Sheet 6: Clarification to Existing Sleeve Locations Added to Plan. The Contractor is hereby notified; Addendum No. 1 must be acknowledged and initialed as stipulated under the instructions to Bidders and submitted as part of the Bid. Failure to do so shall result in the City designating said bid as "Non-Responsive." APPROVED: Ubaldo Ayón Assistant Construction Manager Attachments: 1. Revised Bid Schedule Dated 6-29-2022 2. Updated Plan Sheets 3. Manufacture Technical Data Sheets END OF ADDENDUM NUMBER 1 ADDENDUM 01 – 6/29/2022 Bid Schedule 1210-1 SECTION 1210 BID SCHEDULE PROJECT NO. 2016-03G X-PARK LANDSCAPING AND IRRIGATION IMPROVEMENTS City of La Quinta 78-495 Calle Tampico La Quinta, CA 92253 To Whom It May Concern: Pursuant to the Invitation to Bid, and in accordance with the provisions therein stated, the undersigned hereby proposes and agrees that on award by the City under this Bid, to execute a Contract, with necessary bonds, to furnish and install any and all labor, materials, transportation and services for Project No. 2016-03G X-Park Landscaping and Irrigation Improvements, in accordance with the plans and specifications therefore adopted and on file with the City within the time hereinafter set forth and at the prices named in this Bid. It is understood that the basis of award shall be the lowest total price of the Base Bid Area. Unit prices in each and every case represent the true unit price used in preparing the bid schedule totals (Bid Form). Unit prices listed herein include material, installation and appurtenant work as is necessary to have the item complete and in place meeting the full intent of the plans and specifications. We acknowledge that unbalanced unit prices shall be sufficient cause for the rejection of our bid. ADDENDUM 01 – 6/29/2022 Bid Schedule 1210-2 BASE BID AREA ITEM NO. ITEM DESCRIPTION EST. QTY. UNIT UNIT PRICE (in figures) DOLLARS ITEM TOTAL (in figures) DOLLARS 1 Mobilization 1 LS $ $ 2 Traffic Control 1 LS $ $ 3 Dust Control 1 LS $ $ 4 Demolition and Disposal per Plans (including bollard removal) 1 LS $ $ 5 Site Wall per Plans 12 SF $ $ 6 Clean/Paint Walls per Plan 1 LS $ $ 7 Concrete for Board Yard per Plans 108 SF $ $ 8 Sidewalk Construction per Plans 600 SF $ $ 9 Stamped Concrete per Plans 483 SF $ $ 10 Drainage Concrete Box/Grate per Plans 7 EA $ $ 11 Full Depth Asphalt Concrete Grind (4”±), Compact Existing Aggregate Base, and 4” Asphalt Concrete Overlay 8 SF $ $ 12 Modification of existing fence and furnish and install Pedestrian Gate per Plans 1 EA $ $ 13 Trash Enclosure per Plans 1 LS $ $ 14 Keystone Block Wall 6” high block, 3-course. Locations to be determined in field 100 LF $ $ 15 Clearing, Grubbing, Weed Abatement, and Soil Preparation (including rock and debris removal) 1 LS $ $ 16 Curb, including mow curb, median type curb, and modified median type curb as designated in the plans. 1,802 LF $ $ 17 ¾” Crushed Rock – Desert Gold 18,036 SF $ $ 18 6” Minus Baja Cresta Rubble 2,651 SF $ $ 19 3/8” Crushed Rock – Apache Brown 1,018 SF $ $ ADDENDUM 01 – 6/29/2022 Bid Schedule 1210-3 ITEM NO. ITEM DESCRIPTION EST. QTY. UNIT UNIT PRICE (in figures) DOLLARS ITEM TOTAL (in figures) DOLLARS 20 3/8” Minus Decomposed Granite – Desert Gold 36,145 SF $ $ 21 3/8” Minus Stabilized Decomposed Granite – Desert Gold 12,615 SF $ $ 22 Lawn – Sod 4,215 SF $ $ 23 Artificial Turf with Heatblock Technology 3,590 SF $ $ 24 Furnish and Install Boulders per Plans 36 EA $ $ 25 Furnish and Install Landscaping per Plans 1 LS $ $ 26 Furnish and Install Irrigation per Plans 1 LS $ $ 27 90-Day Maintenance Period 1 LS $ $ 28 Apply Stained Arrow per Caltrans Standard Plan A24A, Bike Lane Arrow, Three-part application 1 EA $ $ Total Amount of Bid Items 1 - 28 $ GRAND TOTAL BASE BID (Figures): $ GRAND TOTAL BASE BID (Words): Bid Amount of each of the above Bid Items must be filled in and completed. It is understood that the quantities shown hereon are but estimates and the bidder is responsible to verify quantities prior to submitting a bid. Final payment will be based upon actual work performed, subject to such adjustments and alterations as elsewhere provided herein. ___________________________________________________________ Signature of Bidder (Ink) ___________________________________________________________ Name of Bidder (Printed or Typed) ___________________________________________________________ Bidder Telephone Number ___________________________________________________________ Bidder Email Address WESTWARD HO DRIVE DUNE PALMS ROAD77-899 WOLF RD.PH. (760) 777-9131FAX (760) 777-9132PALM DESERT, CALIC# 2754, EXP 04/30/2492211HERMANNDESIGNGROUPSUITE 102 WESTWARD HO DRIVE DUNE PALMS ROADFFE 70.0P.E. 69.33SEE ALTUM SHEETS 1-5 FORGRADING AND DUDEKSHEETS 1-4 FOR DRAINAGEOUTSIDE OF SKATEPARKSEE ALTUM SHEETS 1-5FOR GRADING ANDDUDEK SHEETS 1-4 FORPARKING LOTBASIN No. 2RIM = 5,538 SFBOTTOM = 2,263 SFBOTTOM EL. = 56.00.34 AC-FTWS = 60.0BASIN No. 3RIM = 6,476 SFBOTTOM = 2383 SFBOTTOM EL. = 56.00.39 AC-FTWS = 60.06059585756605958575661626162SEE DUDEK PLANS FORBASIN NO.1   77-899 WOLF RD.PH. (760) 777-9131FAX (760) 777-9132PALM DESERT, CALIC# 2754, EXP 04/30/2492211HERMANNDESIGNGROUPSUITE 102 Technical Data Sheet Last Updated: 2018.March.28 | Page 1 of 2 Category > Prepare EZ Etch Concrete Surface Etching Agent Ameripolish, Inc.• 120 Commercial AVE • Lowell, AR 72745 • (479) 725-0033 • www.ameripolish.com Information subject to change. Visit website for current information. © 2018 Ameripolish, Inc. All rights reserved. Product Specification Application:Spray or brush Appearance:Clear liquid VOC:Compliant (<40g/L) Shelf life:1 year Solvent:Water-based Packaging Specification Product # Shipping Wt. Container EZE2 50 lbs.5 gallons RTU EZE10 300 lbs.30 gallons RTU EZE60 550 lbs.55 gallons RTU EZE110 2,500 lbs.250 gallons RTU Product Description Ameripolish® EZ Etch cleans excess mortar, free latent lime, grease, oil, food stains, and organic material from concrete floors and opens up the surface to prepare it for penetrating products such as Ameripolish® ColorJuice Extreme, AquaShield, overlay concrete systems, and water or solvent-based sealers. EZ Etch is environmentally friendly and nonabrasive for use on polished concrete, stone, terrazzo, and other custom concrete surfaces. Features EZ Etch is a perfect blend of materials that work together to make it easy to etch concrete surfaces to better allow for penetration into concrete.•Opens the concrete to prepare it for penetrating agents•Safe for interior and exterior environments•Biodegradable, low odor and non-flammable•Has been designed to work well with other Ameripolish® products such as those formulated for Surface Preparation, Densification, Decorative Color, Surface Protection and Maintenance. EZ Etch is designed to work well with Ameripolish® ColorJuice 3D, AquaShield, X-Link Surface Sealers, or DNS 400. Uses EZ Etch has been formulated to remove mortar, construction soil, grease, oil, food stains, and organic materials that might prevent penetration.•Opens concrete surfaces to make them receptive to overlay systems, color stains, densifiers, stain protectors and sealers.•It is the first step in the ColorJuice Extreme Exterior Concrete Colorant System•Can be used safely on new construction, warehouses, food packaging facilities, airports, residential, restaurants, parking garages, medical facilities, shopping malls, and restoration•Self-neutralizing and non-harmful to plants and animals Technical Data Sheet Last Updated: 2018.March.28 | Page 2 of 2 Category > Prepare EZ Etch Concrete Surface Etching Agent Ameripolish, Inc.• 120 Commercial AVE • Lowell, AR 72745 • (479) 725-0033 • www.ameripolish.com Information subject to change. Visit website for current information. © 2018 Ameripolish, Inc. All rights reserved. • US Environmental Protection Agency • California Air Resources Board SCM Districts* • South Coast Air Quality Management District • Maricopa County, AZ • Northeast Ozone Transport Commission *Before application, verify product conformance with local and state codes. Warning & Safety Information KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. BEFORE USING THIS PRODUCT PLEASE READ THE SAFETY DATA SHEET IN ITS ENTIRETY! Safety Data Sheets (SDS) can be found online at www.ameripolish. com or upon request by contacting Ameripolish at 1-800- 592-9320. Warranty The information contained herein is believed to be reliable. This information is based on laboratory testing and results. Because of variations in methods, conditions and equipment, each user must test this product to make a judgment of performance. Applicator is responsible for testing material for effectiveness and performance. Manufacturer obligation is limited to the refund of purchase price or replacement of material if proven to be defective. Claims must be made in writing and received within one year from date of product sale to original buyer. Sole remedy shall be replacement of product proven defective. Dilution & Coverage Ameripolish® EZ Etch is shipped ready to use (RTU) and can be diluted with water for moderate stains. • Heavy stains (maximum strength): 200 - 400 sqft• Moderate stains (dilute 1 part concentrate to 4 parts water): 400 - 600 sq ft. Application EZ Etch comes as a concentrate that can be used at full strength for maximum effect. If surfaces are moderately stained, it can be diluted 4:1 (4 parts water to 1 part concentrate) with water to increase coverage. 1. Apply EZ Etch to surfaces by conical tip sprayer. Make sure the surface is fully covered and allow EZ Etch to work a minimum of 10 minutes. 2. After 10 minutes, power wash or scrub the surface using a brush or scrubbing machine. 3. After scrubbing, rinse the surface thoroughly with water and vacuum up to remove any surface material. 4. Apply a second etch to areas where stains persist. Let soak, scrub, and wash as stated above. Cleanup Rinse all equipment and applicators with water shortly after using EZ Etch. Storage• Store upright in safe dry place at 40-100ºF (4-41ºC)• Keep product from freezing• Keep out of reach of children• Seal container after use• Do not mix with other chemicals VOC Compliance In addition, Ameripolish® EZ Etch offers VOC compliance with low VOC at <40g/L and is also compliant with national, state, and district regulations: Technical Data Sheet Last Updated: 2020.March.25 | Page 1 of 3 Category > Color ColorJuice E Exterior Concrete Colorant Ameripolish, Inc.• 120 Commercial AVE • Lowell, AR 72745 • (479) 725-0033 • www.ameripolish.com Information subject to change. Visit website for current information. © 2018 Ameripolish, Inc. All rights reserved. Product Specification Application:Spray Appearance:Colored Liquid VOC:Compliant (<1g/L) Shelf life:1 year Base:Water-Based Packaging Specification Item #Unit CJHARD-1 1 gallon / Hardener - Part A N/A 1 gallon / Colorant - Part B CJHARD-5 5 gallon / Hardener - Part A N/A 5 gallon / Colorant - Part B N/A Sample Bottle CJ100 Full Sample Kit Product Description ColorJuice E Concrete Colorant is a fast, easy way to apply color to some types of interior and many types of exterior concrete. ColorJuice E is an improved formula of the old ColorJuice 3D and has an identical application process. It provides durable, rich hues by bonding color pigment directly into the concrete. ColorJuice E is ideal for porous concrete finishes such as broom- finished or stamped concrete including pavements, porches, patios, driveways, sidewalks and pool decks. ColorJuice E can also be used for interior concrete (at the appropriate grit stages) such as garage floors, and can be applied to other cementitious surfaces. Features• Ideal for outdoor use and can be used indoors as well• Fast, easy application• Available in 14 stock colors• Water-based and UV stable• Low VOC• Must be used with X-Link Sealers• Better results when EZ Etch is used to prep surface before color application• In one step improves abrasion resistance, hardens surface, and improves stain resistance while adding color• Reducing freeze/thaw damage and salt damage• Horizontal or vertical application Uses• Ameripolish® ColorJuice E is a fast, easy way to apply color to many types of concrete• Provides durable color by bonding through silicate hardeners, is not hazardous, and eliminates wait times that you would see with other stains• It is ideal for garage floors, sidewalks, porches, patios, driveways, and pool decks, and will bond to most cementitious surfaces.• Can also be applied to interior concrete surfaces• May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete Technical Data Sheet Last Updated: 2020.March.25 | Page 2 of 3 Category > Color ColorJuice E Exterior Concrete Colorant Ameripolish, Inc.• 120 Commercial AVE • Lowell, AR 72745 • (479) 725-0033 • www.ameripolish.com Information subject to change. Visit website for current information. © 2018 Ameripolish, Inc. All rights reserved. Project Conditions: Recommended ambient temperature during application should be 40-90°F (4-32°C). Porous Concrete (broom finished, stamped, etc.) Surface Preparation: Clean concrete with Ameripolish® EZ Etch with a power washer or use other methods. Remove all debris, stains, sealers, and coatings. Concrete must be thoroughly dry before Ameripolish® ColorJuice E application. Equipment: Apply Ameripolish® ColorJuice E using Ameripolish® approved sprayer with conical tip. Application: Spray a light first application of product allowing it to completely absorb and penetrate. After one hour, or when dry, spray a second light application, if needed. Move sprayer in direction at 90 degrees from first application. Protection: Seal concrete using Ameripolish® X-Link Sealer according to the manufacturer’s specifications. Cleanup Clean up tools or any overspray with water before product dries. Allow time to dry. Remove dust or debris with broom, vacuum, water hose, mop, or auto scrubber. Renew protective sealer every one to two years depending on wear and foot traffic. Storage• Store upright in safe dry place at 40-105Fº (4 -41Cº)• Keep product from freezing• Keep out of reach of children• Seal container after use• Do not mix with other chemicals VOC Compliance In addition, Ameripolish® ColorJuice E offers VOC compliance with low VOC at <1g/L and is also compliant with national, state, and district regulations: • US Environmental Protection Agency • California Air Resources Board SCM Districts* • South Coast Air Quality Management District • Maricopa County, AZ • Northeast Ozone Transport Commission *Before application, verify product conformance with local and state codes. Dilution & Coverage Mix Ameripolish® ColorJuice E - Part A (hardener) with Ameripolish® ColorJuice E - Part B (colorant), shake well and the product is ready to be used. On troweled concrete, product will cover approximately 600- 800 sf/gallon (15-20m2/L), and 300-400 sq/gllon (7-10m2/L) on porous concrete. Highly absorbent concrete may lower coverage rates. Preparation Ameripolish® ColorJuice E should be prepared properly. Use Ameripolish® Strip and Clean for cleaning and degreasing Amer- ipolish® EZ Etch for profiling and removing and latent concrete. For an increase in protection use Ameripolish® X-Link Sealers. NEW CONCRETE SHOULD CURE FOR 28 DAYS BEFORE APPLICATION. For best results, perform a moisture content test on both newly poured and existing slabs. Slabs with moisture content 5 lbs per 1000 sf or less show best performance (ASTM F1869 calci- um chloride test). High moisture levels may affect performance of color. Do not apply if concrete is frozen, dirty, or has standing water. Application Make sure the concrete is prepared properly using the Ameripolish® Strip and Clean and/or Ameripolish® EZ Etch products according to the manufacturer’s specifications. Testing: Prior to starting the project, apply Ameripolish® ColorJuice E to sample area of each type of concrete to be treated, using application procedures proposed for project. Confirm that concrete is receptive to colorant. Spray Ameripolish® ColorJuice E with a conical (Gray # 8) tip to lightly wet surface without creating puddles. Apply in a consistent, overlapping circular motion, holding the wand approximately 12- 18 inches above the surface. Color will absorb into concrete more quickly in some places than others. This is normal and does NOT indicate that extra dye is needed. For broom finished concrete, additional applications may be needed to reach the desired color. Do not over apply. Technical Data Sheet Last Updated: 2020.March.25 | Page 3 of 3 Category > Color ColorJuice E Exterior Concrete Colorant Ameripolish, Inc.• 120 Commercial AVE • Lowell, AR 72745 • (479) 725-0033 • www.ameripolish.com Information subject to change. Visit website for current information. © 2018 Ameripolish, Inc. All rights reserved. Warning & Safety Information KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. BEFORE USING THIS PRODUCT PLEASE READ THE SAFETY DATA SHEET IN ITS ENTIRETY! Safety Data Sheets (SDS) can be found online at www.ameripolish.com or upon request by contacting Ameripolish at 1-800-592-9320. Warning & Safety Information (cont’d) People, property, vehicles, animals, plants, and all surfaces not intending to be colored should be protected from the product, splash, overspray, and wind drift, using polyethylene sheeting or other proven protective material. If design requires discreet areas of color, mask adjoining areas, lining color edges with blue painter’s tape or similar adhesive masking material (DO NOT LEAVE DOWN FOR EXTENDED PERIODS OF TIME). Surfaces, animals, or clothing contacted by colorant may be permanently colored. Warranty The information contained herein is believed to be reliable. This information is based on laboratory testing and results. Because of variations in methods, conditions and equipment, each user must test this product to make a judgment of performance. Applicator is responsible for testing material for effectiveness and performance. Manufacturer obligation is limited to the refund of purchase price or replacement of material if proven to be defective. Claims must be made in writing and received within one year from date of product sale to original buyer. Sole remedy shall be replacement of product proven defective. Technical Data Sheet Last Updated: 2019.April.18 | Page 1 of 3 Category > Protect X-Link™ E (WL) Modified Urethane in Wet Look Finish Ameripolish, Inc.• 120 Commercial AVE • Lowell, AR 72745 • (479) 725-0033 • www.ameripolish.com Information subject to change. Visit website for current information. © 2018 Ameripolish, Inc. All rights reserved. Product Specification Application:Spray on Appearance:Milky VOC:Compliant (5g/l) Shelf life:1 year Solvent:Water-Based Packaging Specification Product #Shipping Wt.Container XS-1 10 lbs.1 gallon RTU XS-5 50 lbs.5 gallons RTU XS-30 300 lbs.30 gallons RTU XS-55 550 lbs.55 gallons RTU XS-250 2,500 lbs.250 gallons RTU Product Description Ameripolish® X-Link E (WL) is a modified urethane high- gloss sealer. Modified from our original X- Link WL , X-Link E (WL) provides a true wet look. X-Link E (WL) is extremely durable and breathable from beneath the concrete. X-Link E (WL) is designed for use with ColorJuice Extreme, but can be used to seal natural concrete as well as other cementitious surfaces such as porous brick, natural and manufactured stone, stucco, slate, and flagstone. Features• RTU = Ready to use• “Wet-Look” finish• Non-yellowing finishes• Breathable and fast-drying• Oil and chemical resistant• Added mildew and UV protection• For outdoor applications• Penetrating and durable• Fast application, 1 hour drying• Water-based• Can be applied to most cementitious surfaces, other unglazed stone, and masonry surfaces Uses• Ameripolish® X-Link™ E (WL) exterior masonry and concrete-type surfaces.• Use on colored or uncolored, stamped or exposed aggregate concrete, porous brick, natural and manufactured stone, stucco, slate, unglazed tile and flagstone. Dilution & Coverage Ameripolish® X-Link™ E (WL) is shipped Ready to Use (RTU) and should not be mixed with any other chemical. Approximate coverage rate is 500-1000 sqft per gallon depending on the porosity of concrete or other surfaces. Technical Data Sheet Last Updated: 2019.April.18 | Page 2 of 3 Category > Protect X-Link™ E (WL) Modified Urethane in Wet Look Finish Ameripolish, Inc.• 120 Commercial AVE • Lowell, AR 72745 • (479) 725-0033 • www.ameripolish.com Information subject to change. Visit website for current information. © 2018 Ameripolish, Inc. All rights reserved. Concentrate® for long lasting protection. Cleanup Remove dust and debris with broom, vacuum, water hose, mop or auto-scrubber. Ameripolish® X-Link™ E (WL) should be reapplied every 2-3 years, or more often if deemed necessary. Storage• Store upright in safe dry place at 40-110Fº (4 -43Cº)• Keep product from freezing• Keep out of reach of children• Seal container after use• Do not mix with other chemicals VOC Compliance In addition, Ameripolish® X-Link E (WL) offers VOC compliance with low VOC at 5g/L and is also compliant with national, state and district regulations: • US Environmental Protection Agency• California Air Resources Board SCM Districts*• South Coast Air Quality Management District*• Maricopa County, AZ• Northeast Ozone Transport Commission* *Before application, verify product conformance with local and state codes. Warning & Safety Information KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. BEFORE USING THIS PRODUCT PLEASE READ THE SAFETY DATA SHEET IN ITS ENTIRETY! Safety Data Sheets (SDS) can be found online at www.ameripolish.com or upon request by contacting Ameripolish at 1-800-592-9320. Warranty The information contained herein is believed to be reliable. This information is based on laboratory testing and results. Because of variations in methods, conditions and equipment, each user must test this product to make Preparation WARNING: People, property, vehicles, animals, plants, and all surfaces not intended to be sealed should be protected from the product, splash, over-spray, and wind drift, using polyethylene sheeting or other proven protective material. NEW CONCRETE MUST CURE FOR AT LEAST 28 DAYS BEFORE APPLICATION. For best results, perform a moisture content test on both newly-poured and existing slabs. Slabs with a moisture content 5 lbs per 1000 sf or less show best performance (ASTM F1869 calcium chloride test). High moisture levels may affect performance of sealer. Do not apply if concrete is frozen, dirty or has standing water. Hydrostatic pressure may affect sealer performance. Surface to be sealed must be completely clean. Remove efflorescence, oil, dirt, was, paints, sealers, and curing compounds; pressure wash and/or power scrub if necessary. Ameripolish® Strip & Clean™ is highly recommended to clean the surface. Application1. Prior to starting project, apply X-Link™ E (WL) to sample area of each type of concrete to be treated, using application procedures proposed for project. Confirm that concrete is receptive to sealer. 2. Ambient temperature during application should be 55°F-80°F (12.8°C-26.7°C). Do not apply on rainy, foggy, or extremely humid days. Excess moisture may prevent sealer from drying properly.3. Apply X-Link™ E (WL) using an Ameripolish® Sprayer fitted with a conical mist tip gray #8. 4. Spray X-Link™ E (WL) with the conical tip sprayer in circular motions approximately 18 inches from the project surface. 5. Apply 2 applications for optimal performance and true wet look sheen. Foot traffic may be allowed on sealed surface after 2-4 hours. For heavy traffic, allow 24 hours curing. Sealed surface should be inspected periodically for areas of thin or traffic worn sealer, and sealer reapplied as needed. Normal traffic may require reapplication of X-Link™ E (WL) annually. Use Ameripolish® Rejuvenating Cleaner Technical Data Sheet Last Updated: 2019.April.18 | Page 3 of 3 Category > Protect X-Link™ E (WL) Modified Urethane in Wet Look Finish Ameripolish, Inc.• 120 Commercial AVE • Lowell, AR 72745 • (479) 725-0033 • www.ameripolish.com Information subject to change. Visit website for current information. © 2018 Ameripolish, Inc. All rights reserved. a judgment of performance. Applicator is responsible for testing material for effectiveness and performance. Manufacturer obligation is limited to the refund of purchase price or replacement of material if proven to be defective. Claims must be made in writing and received within one year from date of product sale to original buyer. Sole remedy shall be replacement of product proven defective. Description CA-29 Mini Safe Grip is a Non-Skid Additive that can be added to sealers or topcoats to produce a skid resistant surface to help reduce slip hazards. This lightweight product will remain suspended in most coatings and leaves a less aggressive texture than CA-30 or CA-31. Uses CA-29 can be added to many Westcoat products, but is specifically designed to be used with thin film forming sealers and topcoats, such as: EC-11, EC-32, EC-34, EC-95G, EC-95F, EC-101, EC-102, SC-10, SC-42, SC-65, SC-70 and SC-71. Advantages Increases Slip Resistance • Stays Suspended in Thin Materials • Easy to Use • Works in Clear and Pigmented Coatings PRODUCTSPECIFICATION DISCLAIMER: PURCHASER’S SOLE AND EXCLUSIVE REMEDY AGAINST THE MANUFACTURER OF WESTCOAT, SHALL BE LIMITED SOLELY TO THE REPLACEMENT OF ANY DEFECTIVE MATERIAL OR A PAYMENT BY THE MANUFACTURER IN AN AMOUNT EQUAL TO THE COST OF THE ORIGINAL MATERIAL. R CA-29 6/20 1 of 24007 Lockridge St • San Diego, CA 92102 800-250-4519 • Fax 619-255-7187 • westcoat.com CA-29 Mini Safe Grip Product Data Packaging 32 ounce bottle Colors White, but dries Clear Coverages N/A Mix Ratio Up to 32 ounces by volume per 5 gallons of: SC-10, SC-42, SC-70 or SC-71 Up to 32 ounces by volume per 3 gallons of: EC-11, EC-32, EC-34, EC-95G, EC-95F, EC-101, EC-102 or SC-65 VOC Content 0 gm/l Shelf Life Indefinite in unopened packaging CA ACCESSORIES ADDITIVES & ACCESSORIES Inspection Surface must be prepared in the proper manner that is required in the System Specification sheet for the desired application. Preparation Refer to appropriate System Specification sheet prior to installation. Mixing Mix up to 1 quart (32 ounces by volume) per 5 gallons of SC-10, SC-42, SC-70 or SC-71. Mix up to 1 quart (32 ounces by volume) per 3 gallons of EC-11, EC-32, EC-34, EC-95G, EC-95F, EC-101, EC-102 or SC-65. This will leave a consistent texture that is still fairly easy to clean. The actual skid resistance will be greatly affected by the existing texture of the surface you are covering and the thickness of the coating applied. Do not exceed these amounts without consulting Westcoat. CA-29 may affect the overall gloss or sheen. It is recommended to prepare a mock up prior to application. PRODUCTSPECIFICATION DISCLAIMER: PURCHASER’S SOLE AND EXCLUSIVE REMEDY AGAINST THE MANUFACTURER OF WESTCOAT, SHALL BE LIMITED SOLELY TO THE REPLACEMENT OF ANY DEFECTIVE MATERIAL OR A PAYMENT BY THE MANUFACTURER IN AN AMOUNT EQUAL TO THE COST OF THE ORIGINAL MATERIAL. R CA-29 6/20 2 of 2 CA-29 Mini Safe GripCAACCESSORIES ADDITIVES & ACCESSORIES Coverage For more information on coverage, please refer to the appropriate System Specification sheet. Application For more information on application, please refer to the appropriate System Specification sheet. Dry Time For more information on dry times, please refer to the appropriate System Specification sheet. Clean Up Uncured material can be removed with an environmentally-safe solvent. If cured, material can only be removed mechanically. Limitations • This product is designed for professional use only. • Do not apply in temperatures below 55°F or above 95°F. • Not intended for use with any Non-Westcoat brands. • Not designed to be broadcast. • CA-29 may alter the gloss or sheen on the topcoat or sealer. • It is strongly suggested that all limitations and attributes are disclosed to customer and end user. • Westcoat takes no responsibility for slippery surfaces. The applicator and the customer determine the texture. If additional skid resistance is required, please contact Westcoat for recommendations. • Do not use more CA-29 than recommended. • Do not allow any Westcoat products to freeze. Health Precautions Inhalation of vapor or mist can cause headache, nausea irritation of nose, throat and lungs. Avoid breathing vapors, it is strongly recommended that respirators are worn. Prolonged or repeated skin contact can cause slight skin irritation. All epoxies have the potential of causing skin irritations or allergic reactions. Be careful not to get on skin, clothes or in eyes. Gloves are strongly recommended. If splashed in the eye, flush with warm water and contact a physician if blurring persists. Solvent based products are extremely flammable, extinguish all pilot lights and sources of ignition such as electrical motors. Be sure to have adequate cross ventilation prior to installing. Slip Precaution Westcoat Specialty Coatings Systems highly recommends the use of a slip-resistant additive to all coatings/systems that may be exposed to wet, oily, greasy or slippery conditions. It is the end user’s responsibility to provide a flooring system that meets current safety standards. Westcoat and its distributors will not be responsible for injury incurred during a slip and fall incident. For the current coefficient of friction requirements, please consult your local building codes. 4007 Lockridge St • San Diego, CA 92102 800-250-4519 • Fax 619-255-7187 • westcoat.com