MUP 2022-0005 Madison St 54001 Modification to T-Mobile Telecommunication Facility (07.14.2022)
July 14, 2022
Paulina Mendez
SBA Communication
959 South Coast Drive, Suite 200
Costa Mesa, CA 92626
SUBJECT: MINOR USE PERMIT 2022-0005: T-MOBILE CELL SITE
MODIFICATION 54001 MADISON STREET
The Design and Development Department has approved your request to remove (15)
antennas and replace with (6) antennas, (6) RRUs, add (1) new microwave dish, (1) new
diesel generator and associated equipment, at an existing telecommunication facility
located at 54-001 Madison Street. Approval of this application is subject to the attached
exhibits for the Minor Use Permit and the following Findings and Conditions of Approval per
La Quinta Municipal Code (LQMC) Sections 9.210.025 (F) and 9.170.090 (A-E):
FINDINGS
1. Consistency with the General Plan: The proposed equipment at the existing
telecommunication facility is consistent with the goals, objectives and policies of the
General Plan, in that the proposed equipment is intended to enhance community
access to quality wireless communication services.
2. Consistency with Zoning Code: The proposed new equipment at the existing
telecommunication facility will not create new adverse visual impacts. No change to
the height of the antenna location or general configuration is proposed. The
associated equipment will be placed entirely within the existing equipment cabinet.
The Minor Use Permit is consistent with the provisions of LQMC Section 9.210.025
“Minor Use Permits” and Chapter 9.170 “Wireless Telecommunication Facilities”.
3. Compliance with CEQA. Processing and approval of the permit application are in
compliance with the requirements of the California Environmental Quality Act. The
Minor Use Permit is exempt from the California Environmental Quality Act (CEQA),
pursuant to Section 15301, Existing Facilities.
4. Surrounding Uses: Approval of the application will not create conditions materially
detrimental to the public health, safety and general welfare or injurious to or
incompatible with other properties or land uses in the vicinity.
CONDITIONS
1. The applicant/property owner agrees to defend, indemnify, and hold harmless the
City of La Quinta (the “City”), its agents, officers and employees from any claim, or
litigation arising out of the City’s approval of this project. This indemnification shall
include any award toward attorney’s fees. The City of La Quinta shall have the right
to select its defense counsel in its sole discretion. The City of La Quinta shall promptly
notify the applicant of any claim, action, or proceeding and shall cooperate fully in
the defense.
2. The applicant shall comply with all provisions of La Quinta Municipal Code Section
9.170 “Wireless Telecommunication Facilities”.
3. The applicant shall comply with any applicable provisions contained in Conditions of
Approval for Conditional Use Permit CUP2004-085 and CUP2004-085, Amendment
No. 1.
4. The applicant is permitted to install and remove the equipment identified on the scope
of work on the approved and attached plans for MUP2022-0005. All new and
replacement equipment shall be painted to match the color on the array. Applicant is
also permitted to install all other related equipment within existing equipment
cabinets located in the lease area. All missing and damaged palm fronds shall be
replaced.
5. The applicant shall obtain all necessary building permits from the City’s Building
Division and is responsible for meeting all applicable plan check submittal
requirements. Plans submitted for building permit plan check shall include an
accurate vicinity map.
This decision may be appealed to the Planning Commission by any party who submits the
necessary paperwork and filing fee of $1,526.00 to this office within 15 days of the date of
approval of this permit. Should you have any questions please contact me at (760) 777-
7086.
Sincerely,
Sijifredo Fernandez
Associate Planner
Design and Development
PLANNING APPROVAL ADMINISTRATIVE CASE# ____________________ EXHIBIT# ____________________ INITIAL sfernandez DATE 07/14/2022 5:33:25 PM MUP2022-0005
12/15/2021
03/31/22
QUANTITY COUNTED QUANTITY PROVIDED PART NUMBER DESCRIPTIONS SHEET LIST PIECE WEIGHT (LBS)WEIGHT (LB) NOTESMATERIAL & HARDWARE
FOLLOWING ITEMS ARE "CUSTOM" PARTS
6 6 P296 SITE PRO PIPE (2 3/8" O.D. X 8'‐0") A53 GR‐B SCH 40 A‐1 30.14 180.8 GALVANIZED (LENGTH NOT TO EXCEED 10’‐0”)
6 6 P3096 SITE PRO PIPE (2 7/8" O.D. X 8'‐0") A53 GR‐B SCH 40 A‐1 47.45 284.7 GALVANIZED (LENGTH NOT TO EXCEED 10’‐0”)
6 6 SP219 SITE PRO PIPE MOUNT KIT A‐1 12.47 74.8 GALVANIZED
6 6 SP219H SITE PRO PIPE MOUNT ASSEMBLY A‐1 12.61 75.7 GALVANIZED
6 6 SCX2‐K SITE PRO CROSSOVER PLATE KIT A‐1 8.39 50.3 GALVANIZED
6 6 SCX23‐K SITE PRO CROSSOVER PLATE KIT A‐1 8.40 50.4 GALVANIZED
3 3 P30150 SITE PRO PIPE (2 7/8" O.D. X 12'‐6") A53 GR‐B SCH 40 A‐1 74.14 222.4 GALVANIZED (FINAL CUT LENGTH TO BE DETERMINED IN FIELD)
3 3 SP1‐MSK8 SITE PRO UNIVERSAL ANGLE CORNER CONNECTION BRACKET A‐1 36.33 109.0 GALVANIZED
3 3 L33375‐6 'L 3" X 3" X 3/8" X 6'‐0" A36 D‐1 43.81 131.4 GALVANIZED (FINAL CUT LENGTH TO BE DETERMINED IN FIELD)
NOTE: ALL MATERIALS, WHICH WEREN'T LISTED IN THIS SHEET, ARE ASSUMED TO BE PROVIDED BY THE CONTRACTOR.
1179.6TOTAL WEIGHT (LBS) =
BILL OF MATERIALS
12/15/2021
03/31/22
12/15/2021
03/31/22
ITEM
NO.QTY. PART NO. DESCRIPTIONS
1 6 P296 SITE PRO PIPE (2 3/8" O.D. X 8'-0") A53 GR-B SCH 40
2 6 P3096 SITE PRO PIPE (2 7/8" O.D. X 8'-0") A53 GR-B SCH 40
3 6 SP219 SITE PRO PIPE MOUNT KIT
4 6 SP219H SITE PRO PIPE MOUNT ASSEMBLY
5 6 SCX2-K SITE PRO CROSSOVER PLATE KIT
6 6 SCX23-K SITE PRO CROSSOVER PLATE KIT
7 3 P30150 SITE PRO PIPE (2 7/8" O.D. X 12'-6") A53 GR-B SCH 40
8 3 SP1-MSK8 SITE PRO UNIVERSAL ANGLE CORNER CONNECTION B
12/15/2021
03/31/22
12/15/2021
03/31/22
ITEM
NO.QTY. PART NO. DESCRIPTIONS
1 3 L33375-6 'L 3" X 3" X 3/8" X 6'-0" A36
12/15/2021
03/31/22
12/15/2021
03/31/22
12/15/2021
03/31/22
12/15/2021
03/31/22
12/15/2021
03/31/22
12/15/2021
03/31/22
12/15/2021
03/31/22
12/15/2021
03/31/22