California Pools - Cost Proposalown CALIFORNIA
� commercial pools
2255 Auto Centre Dr, Glendora, CA 91740
Phone: 909.394.1280 Fax: 909.394.4579 Email: bldsC@ca1com 1Poo15.C4rn
CA LIC 415172 DIR 1000001406
DATE: January 16, 2023
TO: Diane Hansen
Management Analyst
City of La Quinta
PROJECT: LQ Park Splash Pad Renovation — Project No 2022-19
FROM: Brett Smith
We are pleased to submit a bid for the above referenced project. This bid is based on the following
proposal documents prepared by the City of La Quinta.
Plan Sheets: None
Specification _Sections: Request for Proposal, Project No 2022-19, LQ Park Splash Pad
Renovation
Addendums: 1, 2
Bond is included in the pricing for this project.
TOTAL BID (Includes Toy Design Option A) $ 749,000.00
ADD Price for Toy Design Option B $ 38,000.00
SCOPE OF WORK
All work shall be completed in accordance with project plans, which will be developed as part of
this project, using generally accepted construction methods and practices. The following
inclusions and exclusions will define our scope of work for construction of the splash pad.
SPLASH PAD INCLUSIONS
• Pad Drawings
1. Layout, dimensions, and sections for pad, perimeter pad walkway, wall /
footing / cap, mechanical room floor, exterior walkways, and equipment
2. Toy layouts
3. Hydraulic designs for underground plumbing and mechanical piping
4. Mechanical equipment design and layout
• Electrical layout
Page 1 of 2
1. Main line connections and low voltage for pad mechanical and control
systems
• Structural Design and Calculations
1. Pad, perimeter pad walkway, wall / footing / cap, toy footings, mechanical
room floor, exterior walkways
■ Health Department Submission and fee, Building department submittal
■ Demolition and removal as follows:
1. Existing splash pad, spray features, and plumbing
2. Pad perimeter wall and footing
3. Equipment in mechanical room
4. Exterior mechanical building slabs and interior slab
5. Water containment tank for existing pad
• Installation of perimeter pool forms based on benchmark, layout, and radius points
• Misc. grading for pad area
■ Excavation, backfill, and compaction of pool piping trenches and water holding tank
■ Provide and install all underground plumbing systems
■ Provide and install two main drains and rain diverter valve
• Structures as follows:
1. Pad and perimeter walkway — gray concrete
2. Seating wall, footing, and wall cap
3. Water holding tank
4. Mechanical room floor and exterior walkways
5. Water toy footings
• Provide and install water toy package Option A, includes toys, actuator, controls, and
manifold — We have allowed $ 95,000.00 for this toy package in the base bid, we will
work with the owner to select toys and layouts based upon this budget.
• Provide and install mechanical equipment as follows:
1. Backflow prevention device and water meter
2. Circulation pump
3. Feature pump
4. High -rate sand filters
5. Automatic chemical control system with Chlorine and CO2 fee units
6. UV system
■ Install pool mechanical equipment plumbing, valves, and fittings
• Electrical as follows:
1. Line voltage electrical connections from existing panel
2. Low voltage interlocks and logic
• Start-up, commissioning, training, and O&M's
EXCLUSIONS
• Stainless steel water play structures — there no vendors that manufacture water toys
in stainless steel
• Epoxy coated rebar at splash pad area — this does not allow for proper bonding
■ Electrical upgrades in mechanical room — we will use existing panels and existing
service
• Building department permit fee — we assume this will be a not cost permit
• Colored or stained concrete or resilient padded surface at pad area
• Compaction at pad area and piping trenches at 90%
• Replacement of grass and irrigation lines around splash pad area
• Any work items not specifically listed above
Page 2 of 2