The URL can be used to link to this page

FA2021-0008ADDITIONAL SITES CHRONOLOGY CONTACTS NAME TYPE NAME ADDRESS1 CITY STATE ZIP PHONE FAX EMAIL APPLICANT Rosmery Nerey 2500 Maitland Center Pkwy Maitland FL 32751 (866)608-3286 NADFire_engineering@ vectorsecurity.com CHRONOLOGY TYPE STAFF NAME ACTION DATE COMPLETION DATE NOTES E-MAIL AARON HICKSON 8/20/2021 8/20/2021 EMAIL TO APPLICANT WITH BL APPLICATION FOR CONTRACTOR NOTE JOSE DELGADO 5/16/2022 5/16/2022 RICK EDWARDS 760.535.6255 CALLED TO CANCEL INSPECTION FOR WEDNESDAY MAY 18 AND THURSDAY MAY 19 AS HE DOES NOT HAVE THE ITEMS KOHL ASKED FOR READY. HE WILL CALL BACK TO RESCHEDULE ONCE HE HAS THAT INFORMATION. CONDITIONS Description: Install upgraded fire alarm system for existing store Type: FIRE ALARM (WEB)Subtype: COMMERCIAL - FIRE ALARM SYSTEM Status: FINALED Applied: 8/19/2021 EPRS Parcel No: 643020022 Site Address: 78865 HIGHWAY 111 LA QUINTA,CA 92253 Approved: 12/19/2021 KHET Subdivision: PM 9618 Block: Lot: 2 Issued: 12/20/2021 JOD Lot Sq Ft: 0 Building Sq Ft: 0 Zoning: Finaled: 9/8/2022 KHET Valuation: $100,000.00 Occupancy Type: Construction Type: Expired: No. Buildings: 0 No. Stories: 0 No. Unites: 0 Details: Printed: Thursday, February 23, 2023 3:51:27 PM 1 of 5 Permit Details City of La Quinta PERMIT NUMBER FA2021-0008 CONTACTS NAME TYPE NAME ADDRESS1 CITY STATE ZIP PHONE FAX EMAIL CONTRACTOR RICHARD D EDWARDS DBA E-TECH 139 ENCANTO DRIVE ESCONDIDO CA 92027 (866)608-3286 RICK@E- TECHSECURITY.COM OWNER EAGLE HARDWARE & GARDEN INC P O BOX 1000 MOORESVILLE NC 92253 (866)608-3286 INSPECTIONS SEQID INSPECTION TYPE INSPECTOR SCHEDULED DATE COMPLETED DATE RESULT REMARKS NOTES ROUGH-WIRE INSPECTION KHET 1/18/2022 1/20/2022 APPROVED Completed by FSI Bryttany Fergusson FINANCIAL INFORMATION DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE RECEIPT #CHECK #METHOD PAID BY CLTD BY FIRE ALARM SYSTEMS 101-0000-42421 0 $483.00 $483.00 12/20/21 WEB10212 634346351 73 CREDIT Rick Edwards EPRS FIRE ALARM SYSTEMS PC 101-0000-42420 0 $564.00 $564.00 12/20/21 WEB10212 634346351 73 CREDIT Rick Edwards EPRS FIRE FAILED OR ADDITIONAL RE- INSPECTION 101-0000-42421 0 $167.00 $0.00 Total Paid for FIRE FEES: $1,214.00 $1,047.00 RECORDS MANAGEMENT FEE 101-0000-42416 0 $10.00 $10.00 12/20/21 WEB10212 634346351 73 CREDIT Rick Edwards EPRS Total Paid for RECORDS MANAGEMENT FEE: $10.00 $10.00 TECHNOLOGY ENHANCEMENT FEE 502-0000-43611 0 $5.00 $5.00 12/20/21 WEB10212 634346351 73 CREDIT Rick Edwards EPRS Total Paid for TECHNOLOGY ENHANCEMENT FEE: $5.00 $5.00 TOTALS:$1,229.00 $1,062.00 Printed: Thursday, February 23, 2023 3:51:27 PM 2 of 5 Permit Details City of La Quinta PERMIT NUMBER FA2021-0008 FUNCTION TEST KHET 5/11/2022 5/11/2022 DISAPPROVE D SEE NOTES Contractor did not request enough time for inspection which has over 100 devices. Reschedule for minimum 5-hour Day 1 Inspection. Contractor must provide scissor lift to access and inspect high mounted appliances. Modifications to approved plans and equipment location and system layout was observed. Clean As-builts are required at time of reinspection. SPRINKLER MONITORING KHET 5/18/2022 5/18/2022 CANCELED DUCT DETECTORS/VELOCITY KHET 5/18/2022 5/18/2022 CANCELED FUNCTION TEST KHET 5/18/2022 5/18/2022 CANCELED FIRE FINAL**KHET 5/19/2022 5/19/2022 CANCELED 24 HR. BATTERY TEST KHET 5/19/2022 5/19/2022 CANCELED FUNCTION TEST KHET 9/7/2022 9/7/2022 APPROVED DUCT DETECTORS/VELOCITY KHET 9/7/2022 9/7/2022 APPROVED SPRINKLER MONITORING KHET 9/7/2022 9/7/2022 APPROVED 24 HR. BATTERY TEST KHET 9/8/2022 9/8/2022 APPROVED FIRE FINAL**KHET 9/8/2022 9/8/2022 APPROVED REVIEWS REVIEW TYPE REVIEWER SENT DATE DUE DATE RETURNED DATE STATUS REMARKS NOTES 1ST FIRE (2 WK)KOHL HETRICK 8/19/2021 9/2/2021 9/2/2021 REVISIONS REQUIRED SEE ATTACHMENTS 1ST PERMIT TECH (1 DAY) AARON HICKSON 8/19/2021 8/20/2021 8/24/2021 COMPLETE EMAILED BL APPLICATION TO APPLICANT THIS WILL ADD CONTRACTOR TO CENTRAL SQUARE PARENT PROJECTS Printed: Thursday, February 23, 2023 3:51:27 PM 3 of 5 Permit Details City of La Quinta PERMIT NUMBER FA2021-0008 ATTACHMENTS Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED DOC 8/19/2021 EtrakitPublicReg 1ST SUBMITTAL FIRE ALARM SHOP DRAWINGS 208 LQCA PERMIT SET.pdf 1 DOC 8/19/2021 EtrakitPublicReg 1ST SUBMITTAL ALL CUT SHEETS & CFM LISTINGS 0208 Lowes SpecBook.pdf 1 DOC 9/22/2021 Etrakit Public Registration REV 1 FA permit drawings 208 LQCA PERMIT SET REV 1.pdf 1 DOC 12/1/2021 Etrakit Public Registration REV 2 FA permit drawings 208 LQCA PERMIT SET REV 1_1.pdf 1 DOC 1/20/2022 JOSE DELGADO FA2021-0008 APPROVED FA ROUGH INSPECTON 1.18.2021.pdf FA2021-0008 APPROVED FA ROUGH INSPECTON 1.18.2021.pdf 0 DOC 9/2/2021 KOHL HETRICK FA2021-0008 - 1ST PC - FIRE PLAN CORRECTIONS.pdf FA2021-0008 - 1ST PC - FIRE PLAN CORRECTIONS.pdf 1 DOC 9/2/2021 KOHL HETRICK FA2021-0008 - 1ST REVIEW - FIRE CORRECTIONS.pdf FA2021-0008 - 1ST REVIEW - FIRE CORRECTIONS.pdf 1 DOC 9/29/2021 KOHL HETRICK FA2021-0008 - 2ND REVIEW - PLAN CORRECTIONS.pdf FA2021-0008 - 2ND REVIEW - PLAN CORRECTIONS.pdf 1 BOND INFORMATION 2ND FIRE (1 WK)KOHL HETRICK 9/22/2021 9/29/2021 9/29/2021 REVISIONS REQUIRED SEE ATTACHMENTS 3RD FIRE (1 WK)KOHL HETRICK 12/1/2021 12/8/2021 12/19/2021 APPROVED SEE ATTACHMENTS Spoke with Joseph Messer (FA Designer) who will relay the message of several items still not addressed. Will have the actual designer correct and email the clean sheet back ASAP. Printed: Thursday, February 23, 2023 3:51:27 PM 4 of 5 Permit Details City of La Quinta PERMIT NUMBER FA2021-0008 ATTACHMENTS Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED DOC 9/29/2021 KOHL HETRICK FA2021-0008 - 2ND REVIEW - FIRE CORRECTIONS.pdf FA2021-0008 - 2ND REVIEW - FIRE CORRECTIONS.pdf 1 DOC 12/19/2021 KOHL HETRICK FA2021-0008 - APPROVED PLANS.pdf FA2021-0008 - APPROVED PLANS.pdf 1 DOC 12/19/2021 KOHL HETRICK FA2021-0008 - COA AND JOB CARD.pdf FA2021-0008 - COA AND JOB CARD.pdf 1 DOC 5/17/2022 KOHL HETRICK 0208 LQCA FA ASBUILT.pdf 0208 LQCA FA ASBUILT.pdf 1 Printed: Thursday, February 23, 2023 3:51:27 PM 5 of 5 Permit Details City of La Quinta PERMIT NUMBER FA2021-0008 Jeremiah Mundell, SET132057FIRE ALARM SYSTEMSLEVEL IVDate:ENGINEER OF RECORDJeremiah Mundell2500 MAITLAND CTR PKWYSUITE 105703-468-6100NADFireEngineering@vectorsecurity.com5/3/2021AC POWERANNUNCIATORNAC OUT 1NAC OUT 2FACPNAC OUT 3NAC OUT 4+--BATTERYBATTERY+IMM001D002M004RISERM011-022NOTIFICATION APPLIANCE CIRCUIT 1EOL#1NOTIFICATION APPLIANCE CIRCUIT 2EOL#2NOTIFICATION APPLIANCE CIRCUIT 3EOL#3NOTIFICATION APPLIANCE CIRCUIT 4EOL#4NOTIFICATION APPLIANCE CIRCUIT 5EOL#5NOTIFICATION APPLIANCE CIRCUIT 13EOL#13NOTIFICATION APPLIANCE CIRCUIT 14EOL#14NOTIFICATION APPLIANCE CIRCUIT 15EOL#15NOTIFICATION APPLIANCE CIRCUIT 16EOL#16NOTIFICATION APPLIANCE CIRCUIT 17EOL#17NOTIFICATION APPLIANCE CIRCUIT 18EOL#18NOTIFICATION APPLIANCE CIRCUIT 19EOL#19NOTIFICATION APPLIANCE CIRCUIT 22EOL#22-BATTERY+HWF2-COM PANEL MUST BE WITHIN 20'OF FACP & IN SAME ROOMAC POWERTO ROUTER HWF2-COMPANELSOLEPATHCELLULARPRIMARY DIALER+--BATTERYBATTERY++--BATTERYBATTERY++--BATTERYBATTERY++--BATTERYBATTERY+MRSMRSMRSMRSMRSSANNUNCIATORNACPANELNAC POWER SUPPLIES #1-2TROUBLE MODULENACPANEL12115115115115177CCCC115C177NACPANELNACPANEL34NAC POWER SUPPLIES #3-4TROUBLE MODULEC7575751515C15C115177115115115CCCC115CCCCC17717715151515MMPMMMRSMRSMRSSPMMMMMMMMM115115115115177CCCC177115177177177CCCCCCCC177115115115115CCC115115115CCCCC177177177115177177177177115115115115177177CCCCCCCCCC177177CC177115115115177115177115115115115115CCCCCCC RTU8M048/M078 RTU9M049/M079 RTU11M051/M081 RTU14M054/M084 RTU12M052/M082INAC POWERNAC OUT 1NAC OUT 2NAC OUT 3NAC OUT 4NAC OUT 5NAC OUT 6NAC OUT 7INAC POWERNAC OUT 1NAC OUT 2NAC OUT 3NAC OUT 4NAC OUT 5NAC OUT 6NAC OUT 7TB5TB5CCINAC POWERNAC OUT 1NAC OUT 2NAC OUT 3NAC OUT 4NAC OUT 5NAC OUT 6NAC OUT 7INAC POWERNAC OUT 1NAC OUT 2NAC OUT 3NAC OUT 4NAC OUT 5NAC OUT 6NAC OUT 7TB5TB5WPWPWPCCC RTU21M061/M091 RTU3M043/M073 RTU7M047/M077CCCCCCCCD001MMM002M003M031PMRSMRSMRS RTU10M050/M080 RTU1M041/M071 RTU2M042/M072MRSMRS RTU4M044/M074 RTU5M045/M075MRSMRSMRS RTU16M056/M086 RTU17M057/M087 RTU19M059/M089MRS RTU20M060/M090MD003SMMM005MRSMRS RTU13M053/M083 RTU6M046/M076MRS RTU18M058/M088115C115CNOTIFICATION APPLIANCE CIRCUIT 8EOL#8NOTIFICATION APPLIANCE CIRCUIT 9EOL#9NOTIFICATION APPLIANCE CIRCUIT 10EOL#10EOL#11EOL#12115115177177177177177177CCCCCC115C177115C177115115115115CCCC177115115115115CCCC115115115115177115CCCCC115CCCCCCCNOTIFICATION APPLIANCE CIRCUIT 11NOTIFICATION APPLIANCE CIRCUIT 12EOL#2117775CCNOTIFICATION APPLIANCE CIRCUIT 21177C177CC115115C177C115C177177CC177177CC177177CC+--BATTERYBATTERY+NAC POWER SUPPLIES #1-2TROUBLE MODULENACPANEL5INAC POWERNAC OUT 1NAC OUT 2NAC OUT 3NAC OUT 4NAC OUT 5NAC OUT 6NAC OUT 7TB5NOTIFICATION APPLIANCE CIRCUIT 7EOL#7NOTIFICATION APPLIANCE CIRCUIT 20EOL#20NOTIFICATION APPLIANCE CIRCUIT 23EOL#23EOL#24EOL#2511511515CC7575C177177C177C177177CCCCCNOTIFICATION APPLIANCE CIRCUIT 24NOTIFICATION APPLIANCE CIRCUIT 25EOL#615CNOTIFICATION APPLIANCE CIRCUIT 6177C15C15C115C15C177C177177CC177177CC115C15C15C15C15C115C115C15CIMMM029177CMODULE ADDRESSES M###M###POINT TO BE ANNUNCIATED AS:MODULE DETAILSFIREALARMSUPERVISORYALARMTROUBLEALL FIRE ALARM WIRING MUST ANNUNCIATE A TROUBLE ALARM DURING OPEN ANDGROUND FAULT CONDITIONS. ADDITIONALLY ALL OUTPUT CIRCUITS (HORNS/STROBE)ARE REQUIRED TO ANNUNCIATE A TROUBLE ALARM DURING A WIRE TO WIRE SHORTCONDITION. THE FIRE ALARM SYSTEM WILL BE TESTED BY THE OWNER'SREPRESENTATIVES TO THE CRITERIA OF NFPA 72.001RR NAC TRX002FT NAC TRX003SPKLR RM PULLX004MAIN ENTR PULLX005LMBR NAC TRX006HORN CIR. TRX007AC FAILX008KNOXBOXX009010011WATERFLOW #1X012WATERFLOW #2X013WATERFLOW #3X014WATERFLOW #4X015WATERFLOW #5X016WATERFLOW #6X017TAMPER #1X018TAMPER #2X019TAMPER #3X020TAMPER #4X021TAMPER #5X022TAMPER #6X023024025026027028029PIVX030031RISER PULLX032033034035036037038039040041DUCT DET. RTU #1X042DUCT DET. RTU #2X043DUCT DET. RTU #3X044DUCT DET. RTU #4X045DUCT DET. RTU #5X046DUCT DET. RTU #6X047DUCT DET. RTU #7X048DUCT DET. RTU #8X049DUCT DET. RTU #9X050DUCT DET. RTU #10X051DUCT DET. RTU #11X052DUCT DET. RTU #12X053DUCT DET. RTU #13X054DUCT DET. RTU #14X055056DUCT DET. RTU #16X057DUCT DET. RTU #17X058DUCT DET. RTU #18X059DUCT DET. RTU #19X060DUCT DET. RTU #20X061DUCT DET. RTU #21X062063064065066067068069070071SHUTDOWN RTU #1X072SHUTDOWN RTU #2X073SHUTDOWN RTU #3X074SHUTDOWN RTU #4X075SHUTDOWN RTU #5X076SHUTDOWN RTU #6X077SHUTDOWN RTU #7X078SHUTDOWN RTU #8X079SHUTDOWN RTU #9X080SHUTDOWN RTU #10X081SHUTDOWN RTU #11X082SHUTDOWN RTU #12X083SHUTDOWN RTU #13X084SHUTDOWN RTU #14X085086SHUTDOWN RTU #16X087SHUTDOWN RTU #17X088SHUTDOWN RTU #18X089SHUTDOWN RTU #19X090SHUTDOWN RTU #20X091SHUTDOWN RTU #21X092093094095096097098099100DETECTOR ADDRESSES D###D###POINT TO BE ANNUNCIATED AS:DETECTOR DETAILSFIREALARMSUPERVISORYALARMTROUBLEALL FIRE ALARM WIRING MUST ANNUNCIATE A TROUBLE ALARM DURING OPEN ANDGROUND FAULT CONDITIONS. ADDITIONALLY ALL OUTPUT CIRCUITS (HORNS/STROBE)ARE REQUIRED TO ANNUNCIATE A TROUBLE ALARM DURING A WIRE TO WIRE SHORTCONDITION. THE FIRE ALARM SYSTEM WILL BE TESTED BY THE OWNER'SREPRESENTATIVES TO THE CRITERIA OF NFPA 72.001FACP SMOKEX002FT NAC SMOKEX003004005006007008009010011012013014015016017018019020021022023024025026027028029030031032033034035036037038039040041042043044045046047048049050051052053054055056057058059060061062063064065066067068069070071072073074075076077078079080081082083084085086087088089090091092093094095096097098099100SUPPLEMENTARYREQUIRED FIRESAFETY CONTROLSYSTEM OUTPUTSACTUATE COMMON ALARM SIGNAL INDICATOR ACTUATE AUDIBLE ALARM SIGNAL ACTUATE COMMON SUPERVISORY SIGNAL INDICATOR ACTUATE AUDIBLE SUPERVISORY SIGNAL ACTUATE COMMON TROUBLE SIGNAL INDICATOR ACTUATE AUDIBLE COMMON TROUBLE SIGNAL ACTUATE HORNS & STROBES THROUGHOUT FACILITY DISPLAY CHANGE OF STATUS TRANSMIT FIRE SIGNAL TO SUPERVISING STATION TRANSMIT SUPERVISORY SIGNAL TO SUPERVISING STATION TRANSMIT TROUBLE SIGNAL TO SUPERVISING STATION RELEASE MAGNETICALLY HELD DOORS HVAC SHUTDOWN PROCCESS ACTUATE EXTTERIOR HORN/STROBE AT F.D. RESPONSE POINT NOT USED NOT USEDSYSTEM INPUTSABCDEFGHIJKLMNOP1FIRE ALARM SYSTEM AC POWER FAILURE••••12FIRE ALARM SYSTEM LOW BATTERY••••23OPEN CIRCUIT••••34GROUND FAULT••••45NOTIFICATION APPLIANCE SHORT CIRCUIT••••56COMMINCATION LOSS••••67FIRE ALARM SYSTEM PULL STATIONS•••••78NOT USED89SMOKE DETECTORS•••••910IN-DUCT SMOKE DETECTORS••••I1011NOT USED1112NOT USED1213WATERFLOW••••••1314SPRINKLER CONTROL VALVE••••1415NOT USED1516NOT USED1617NOT USED1718NOT USED1819NOT USED1920NOT USED20ABCDEFGHIJKLMNOPI-INDIVIDUAL HVAC SHUTDOWNCONTROL UNITANNUNCIATIONNOTIFICATIONCODE SUMMARYSCOPE OF WORKTHIS PROJECT INVOLVES THE INSTALLATION & TESTING OF AN UPGRADED FIRE PROECTIONSUPERVISORY SYSTEM WITHIN AN EXISTING LOWES RETAIL STORE. THE SYSTEM SHALL BE MONITOREDBY AN APPROVED LISTED MONITORING STATION.APPLICABLE BUILDING CODESBUILDING2019 CBCCODESAMMENDMENTS FIRE2019 CFCELECTRICAL2019 CECNFPA722019 NFPAMECHANICAL2019 CMCOTHEROTHEROCCUPANCYCLASSIFICATIONMERCANTILE GROUP MCONSTRUCTION TYPEGROSS SQ FTTYPE II-B161,985PROJECT INFORMATIONNAME OF PROJECTLOWES 208ADDRESS78-865 HIGHWAY 111LA QUINTA CAPROPOSED USERETAILFIRE ALARM VENDORVECTOR SECURITY13555 WELLINGTON CENTER CIRCLESUITE 123GAINESVILLE, VA 20155(888) 832-8671FIRE ALARM DESIGNERZACHARY GARVERVECTOR SECURITY2500 MAITLAND CENTER PARKWAYMAITLAND, FL 32751(703) 468-6100EXT. 52519INASTALLING CONTRACTORNAME OF CONTRACTORRICK EDAWRDSE-TECH SECURITY139 ENCANTO DRESCONDIDO, CA 92027LICENSE NUMBERNFPA 72 AND ADA DEVICE INSTALLATIONREQUIREMENTS3'-0"MINIMUMANNUNCIATORMANUAL PULL5'-0" MAXIMUM0'-4" MINIMUMSMOKE/ HEATMOUNT ON A BOXAPPROVEDEXITDETECTOR96" MAXIMUMTOP OF DEVICE80" MINIMUMBOTTOM OF DEVICE5'-6"FLOORFINISHEDSTROBECONTROLPANELHORN/ STROBEAIR SUPPLY DIFFUSER ORRETURN AIR OPENINGGRAPHICNATIONAL ELECTRIC CODEINSTALL PERCONDUIT& VISUAL DEVICESMOUNT AUDIBLE0'-4"MINIMUM,0'-6" MINIMUMBOXES.ON APPROVED3'-8"(3'-6" MINIMUM,4'-0" MAXIMUM)HINGED SIDE1'-0"MAXIMUMSTATIONINDEX OF DRAWNIGSFA-0 TITLE SHEET, GENERAL NOTES AND SYSTEM RISER DIAGRAMFA-1 AND FIRE ALARM SYSTEM CALCULATIONSFA-2 FIRE ALARM INITIATE LAYOUTFA-3 FIRE ALARM NOTIFICATION LAYOUTFA-4 FIRE ALARM SYSTEM DEVICE INSTALLATION DETAILSDE-0 DELAYED EGRESS LAYOUTNOTES1. A MICROPROCESSOR-BASED MULTIPLEX FIRE ALARM SYSTEM WITH INTELLIGENT, ADDRESSABLE INITIATIONDEVICES WILL BE REQUIRED. THE RISER DIAGRAM IS BASED AROUND A MULTIPLEX ADDRESSABLE SYSTEM. THEFIRE ALARM SYSTEM SHALL BE MONITORED BY AN APPROVED CENTRAL STATION MONITORING SERVICE.INTERFACE EQUIPMENT WILL BE FULLY UL LISTED AND FM APPROVED FOR THIS PURPOSE.2. SIGNALING LINE CIRCUITS SHALL BE CLASS B, STYLE 4 MINIMUM. INITIATING DEVICE CIRCUITS SHALL BE CLASSB, STYLE B MINIMUM. NOTIFICATION APPLIANCE CIRCUITS SHALL BE CLASS B, STYLE Y MINIMUM.3. OUTDOOR DEVICES (WHEN REQUIRED) SHALL BE MOUNTED ON CAST WEATHERPROOF OUTLET BOXES (2 GANGBELL BOX).4. ALL FIRE ALARM CABLING SHALL BE ROUTED THROUGH CONDUIT FROM DEVICES TO BOTTOM OF THE BAR JOIST.AT THAT POINT CABLING SHALL BE RUN EXPOSED ALONG THE CEILING IF ACCEPTABLE BY THE AHJ.5. THE ELECTRICAL CONTRACTOR SHALL PROVIDE ALL LINE VOLTAGE (120 V. MAX.) IN SEPARATE CONDUIT. SHALLBE INSTALLED PER NEC UNLESS OTHERWISE NOTED BY LOCAL AUTHORITIES.6. ALL EXPOSED CABLE BELOW THE BOTTOM OF THE BAR JOIST, OTHER ROOF STRUCTURE OR OTHER LOCATIONSWHERE THE CABLE MAY BECOME EXPOSED AND/OR DAMAGED, MUST BE INSTALLED WITHIN A STEEL CONDUIT. ALLSPLICES SHALL BE TERMINATED IN A BOX MARKED AS SPLICE POINT.7. SYSTEM OPERATION, TESTING, TURN OVER, WARRANTY, COMPLIANCE, AND AFTER MARKET SERVICE SHALL BEPROVIDED BY THE FIRE ALARM CONTRACTOR.8. VECTOR SECURITY SHALL NOT BE RESPONSIBLE FOR UNAUTHORIZED CHANGES TO OR USES OF THESE PLANS.ALL CHANGES TO THE PLANS MUST BE IN WRITING AND MUST BE APPROVED BY VECTOR SECURITY.9. ALL CONDUIT, BOXES (UNLESS OTHERWISE INDICATED), FITTINGS, COUPLINGS, CONNECTORS, STRAPS,SUPPORTS, PULL-LINES, BUSHINGS, ETC. SHALL BE PROVIDED AND INSTALLED BY THE ELECTRICAL CONTRACTOR.ALL WORK SHALL MEET OR EXCEED THE REQUIREMENTS OF NFPA 70.10. ALL CONDUIT AND BACK BOX SIZES SHALL BE COORDINATED WITH THE FIRE ALARM CONTRACTOR.11. ALL CONDUIT SHALL BE STUBBED UP TO BOTTOM OF BAR JOIST.12. NO HORIZONTAL RUNS ON WALLS WILL BE ALLOWED BELOW THE BAR JOIST.13. LOOSE WIRE SHALL BE INSTALLED AND SECURED TO THE UPPER LEVEL OF THE BAR JOIST AND SHALL RUNEITHER PARALLEL OR AT 90° TO THE JOIST. NO DIAGONAL WIRING WILL BE ALLOWED.14. THE INSTALLATION CONTRACTOR SHALL COORDINATE ALL LOCATIONS WITH THE LATEST FIXTURE PLANS PRIORTO INSTALLATION.15. ALL NOTIFICATION APPLIANCES SHALL BE SYNCHRONIZED PER NFPA 72.16. AUDIBLE EVACUATION SIGNAL SHALL BE TEMPORAL 3 PER NFPA 72.17. A SYSTEM RECORD DOCUMENT BOX SHALL BE INSTALLED PER NFPA 72.18. FIRE ALARM BREAKER SHALL BE LOCKED UP AND LABELED.19. FIRE ALARM CONTROL PANEL OPERATING CONTROLS SHALL NOT BE MORE THAN 72”ABOVE THE FINISHEDFLOOR LEVEL.SCALE:N.T.S.SYSTEM RISER DIAGRAMDATE:SHEETREVISIONSFA-0SHEET NO.1SUBMITTALS PREPARED BY:VECTOR SECURITY NETWORKS2500 MAITLAND CTR PKWYSUITE 105MAITLAND, FL 32751703-468-6100DRAWN BY:JAM5/18/2021THIS DRAWING ANDDESIGNS SHALL NOT BEDUPLICATED, USED, ORDISCLOSED TO OTHERSFOR PROCUREMENT OROTHER PURPOSES,EXCEPT AS OTHERWISEAUTHORIZED BYCONTRACT, WITHOUTWRITTEN CONSENT OFVECTOR SECURITY, INCREPRODUCTIONS SHALLBEAR THIS NOTICE.LOWES 208 78-865 HIGHWAY 111 LA QUINTA CA FIRE ALARM SYSTEM UPGRADE SCALE:N.T.S.SYSTEM ANNUNCIATIONSCALE:N.T.S.SYSTEM INPUT/OUTPUT MATRIX760-480-9803760-535-6255C-10: 723960FIRE ALARM MONITORED BYUL CERTIFICATE NUMBER:GENERAL MONITORING SERVICES INC17951 LYONS CIRHUNTINGTON BEACH, CA 92647-7167UUFX UL#S7894-1S2535(888) 832-8671AS-BUILT05/12/2022 Jeremiah Mundell, SET132057FIRE ALARM SYSTEMSLEVEL IVDate:ENGINEER OF RECORDJeremiah Mundell2500 MAITLAND CTR PKWYSUITE 105703-468-6100NADFireEngineering@vectorsecurity.com5/3/2021DATE:SHEETREVISIONSFA-0SHEET NO.1SUBMITTALS PREPARED BY:VECTOR SECURITY NETWORKS2500 MAITLAND CTR PKWYSUITE 105MAITLAND, FL 32751703-468-6100DRAWN BY:JAM5/18/2021THIS DRAWING ANDDESIGNS SHALL NOT BEDUPLICATED, USED, ORDISCLOSED TO OTHERSFOR PROCUREMENT OROTHER PURPOSES,EXCEPT AS OTHERWISEAUTHORIZED BYCONTRACT, WITHOUTWRITTEN CONSENT OFVECTOR SECURITY, INCREPRODUCTIONS SHALLBEAR THIS NOTICE.LOWES 208 78-865 HIGHWAY 111 LA QUINTA CA FIRE ALARM SYSTEM UPGRADE SCALE:N.T.S.NAC VOLTAGE LOSSFACP BATTERY CALCULATIONS ANDSCALE:N.T.S.BATTERY CALCULATIONS AND VOLTAGE LOSSNAC PANEL 1SCALE:N.T.S.BATTERY CALCULATIONS AND VOLTAGE LOSSNAC PANEL 2SCALE:N.T.S.BATTERY CALCULATIONS AND VOLTAGE LOSSNAC PANEL 3SCALE:N.T.S.BATTERY CALCULATIONS AND VOLTAGE LOSSNAC PANEL 4SCALE:N.T.S.BATTERY CALCULATIONS AND VOLTAGE LOSSNAC PANEL 5AS-BUILT05/12/2022 WIRE LEGENDSYMBOLDRAWING COLORMODEL NUMBERINITIATE CIRCUIT(24V)18/4 FPL FIRE CABLENAC CIRCUIT (24V)14/2 FPL FIRE CABLESLC CIRCUIT (24V)18/4 FPL FIRE CABLEANNUN CIRCUIT (24V)18/4 FPLP FIRE CABLEDUCT DETECTOR PWR14/2 FPL FIRE CABLEFACPANNNACCOMDOCCMRPSIMCWPSSYMBOL LEGENDSYMBOLDESCRIPTIONMODEL NUMBERQTY.FIRE ALARM CONTROL PANELFIRELITEES-200X1FIRE ALARM KEYPAD/ANNUNCIATORFIRELITEANN802NOTIFICATION APPLIANCE POWER SUPPLYFIRELITEFL-PS105CELLULAR COMMUNICATORHONEYWELLHWF2-COM1SPACE AGE DOCUMENT BOXSDR-ACE-11SSU006891ADDRESSABLE INPUT MODULEFIRELITEMMF-30035ADDRESSABLE MINI-INPUT MODULEFIRELITEMMF-3013RELAY MODULEFIRELITECRF-30020ADDRESSABLE SMOKE DETECTOR (CEILINGMOUNTED)FIRELITESD-365T3ADDRESSABLE MANUAL PULL STATIONFIRELITEBG-12LX3ISOLATION MODULEFIRELITEI30080 db HORN/STROBE (CEILING MOUNTED)WHEELOCKHSRC3580 db WEATHERPROOF HORN/STROBE (WALLMOUNTED)WHEELOCKASWP-2475C-FR3STROBE ONLY(WALL MOUNTED @ 80" AFF)WHEELOCKSTRC109SMOKE DETECTOR IN DUCTSYSTEM SENSORD412020FLOW DETECTOR SWITCHEXISTING4TAMPER DETECTOR/SWITCHEXISTING10PRESSURE SETECTOR SWITCHEXISTING2END OF LINE RESISTORMMJeremiah Mundell, SET132057FIRE ALARM SYSTEMSLEVEL IVDate:ENGINEER OF RECORDJeremiah Mundell2500 MAITLAND CTR PKWYSUITE 105703-468-6100NADFireEngineering@vectorsecurity.com5/3/2021MMMMMMMMMMMMM011-022M-002SMMIMIMD-001M-001NACNACSD-002SRTU #3SRTU #2SRTU #18SRTU #7SRTU #5SRTU #6SRTU #9SRTU #8SRTU #12MRRTU-6 M-046 M-076RTU-18 M-058 M-088RMMODULES AND CONTROLRELAYS FOR DUCT SMOKEDETECTORS TO BE MOUNTEDABOVE EGRESS DOORACCESSIBLE BY LADDER.MRRTU-3 M-043 M-073RTU-7 M-047 M-077RMMMMRRRRRTU-8 M-048 M-078RTU-9 M-049 M-079RTU-11 M-051 M-081RTU-12 M-052 M-082RTU-20 M-060 M-090MODULES AND CONTROLRELAYS FOR DUCT SMOKEDETECTORS TO BE MOUNTEDABOVE EGRESS DOORACCESSIBLE BY LADDER.MMPM-004MODULES AND CONTROLRELAYS FOR DUCT SMOKEDETECTORS TO BE MOUNTEDABOVE EGRESS DOORACCESSIBLE BY LADDER.PM-031NACNACFACPNACNACCOMDOCMRSRTU #11SRTU #20M-005NACSD-003MMTOMEZZANINEFROMMEZZANINETO PIVM*APPROXIAMATE LOCATIONOF PIV. CONNECT TO SLC.M-029TOMEZZANINEFROMMEZZANINEMMMMRRRRRTU-1 M-041 M-071RTU-2 M-042 M-072RTU-4 M-044 M-074RTU-5 M-045 M-075RTU-16 M-056 M-086RTU-17 M-057 M-087RTU-19 M-059 M-089RRRMSRTU #19SRTU #4SRTU #17SRTU #16SRTU #1MMMFAAM-003PMODULES AND CONTROLRELAYS FOR DUCT SMOKEDETECTORS TO BE MOUNTEDABOVE EGRESS DOORACCESSIBLE BY LADDER.MMMMMMMMMMMMM011-022PM-031M-005NACSD-003MMTOMEZZANINESMMIMIMD-001M-001PM-004NACNACFACPNACNACCOMDOCSRTU #10SRTU #21MRFROMMAIN FLOORMODULES AND CONTROLRELAYS FOR DUCT SMOKEDETECTORS TO BE MOUNTEDABOVE EGRESS DOORACCESSIBLE BY LADDER.MRRTU-10 M-050 M-080RTU-21 M-061 M-091TOMAIN FLOORSSRTU #14MRM-054 M-084RTU #13M-053 M-083FROMMAIN FLOORMRTOMAIN FLOORDATE:SHEETREVISIONSFA-2SHEET NO.3SUBMITTALS PREPARED BY:VECTOR SECURITY NETWORKS2500 MAITLAND CTR PKWYSUITE 105MAITLAND, FL 32751703-468-6100DRAWN BY:JAM5/18/2021THIS DRAWING ANDDESIGNS SHALL NOT BEDUPLICATED, USED, ORDISCLOSED TO OTHERSFOR PROCUREMENT OROTHER PURPOSES,EXCEPT AS OTHERWISEAUTHORIZED BYCONTRACT, WITHOUTWRITTEN CONSENT OFVECTOR SECURITY, INCREPRODUCTIONS SHALLBEAR THIS NOTICE.LOWES 208 78-865 HIGHWAY 111 LA QUINTA CA FIRE ALARM SYSTEM UPGRADE 1""= 20'-0"INITIATE LAYOUTFIRE ALARM SYSTEM1/8" = 1'-0"DETAILSPRINKLER ROOM1/8" = 1'-0"DETAILFACP & REAR NAC1"=20'-0"DETAILMEZZANINEAS-BUILT05/12/20221"=20'-0"DETAILMEZZANINE 177cd9-3177cd9-4177cd9-5177cd9-6177cd11-1177cd18-4115cd14-6115cd14-5115cd14-4115cd14-3115cd14-2115cd14-1115cd15-1115cd15-2115cd15-3115cd15-4177cd18-3177cd19-6177cd9-1177cd12-6177cd19-1177cd12-1177cd10-6177cd11-6177cd8-6177cd16-515cd2-315cd2-115cd2-215cd2-4115cd13-6115cd13-5115cd13-4115cd13-3115cd13-2115cd13-1177cd18-5115cd19-2115cd19-3115cd19-4115cd19-5115cd12-7115cd12-5115cd12-4115cd12-3115cd12-2177cd16-4177cd16-3177cd16-2177cd16-1177cd17-8177cd17-7177cd17-6177cd17-5177cd17-4177cd17-3177cd17-2177cd18-2177cd18-1177cd15-5177cd15-6177cd9-2177cd3-2177cd3-7177cd4-6177cd5-5177cd5-4177cd8-5177cd21-4177cd2-6177cd2-515cd1-315cd1-115cd1-215cd6-530cd6-315cd6-415cd6-215cd6-1115cd3-1115cd3-3115cd3-4115cd3-5115cd3-6177cd11-2177cd11-3177cd11-4177cd8-1177cd8-2177cd8-3177cd8-4177cd6-6115cd4-1115cd4-2115cd4-3115cd4-4115cd4-5115cd5-1115cd5-2115cd5-375cd1-575cd1-675cd1-4177cd11-5177cd10-1177cd10-2177cd10-3177cd10-4177cd10-5NACNAC75cd7-175cd7-2CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCWP115cd18-6115cd13-7CC115cd16-7115cd16-6CCNACNACFACPNACNACCOMDOCCCNACFAACONNECT TODEVICES ONMEZZ. ABOVETO NAC 1OUT 2TO NAC 1OUT 1WPWPCCCCCCCCCCCCTO NAC 5OUT 1CTO NAC 1OUT 5TO NAC 1OUT 4TO NAC 1OUT 3TO NAC 5OUT 6TO NAC 2OUT 2CCCCCTO NAC 2OUT 5TO NAC 2OUT 4TO NAC 2OUT 3CCTO NAC 2OUT 6TO NAC 4OUT 1CCCCTO NAC 3OUT 6TO NAC 3OUT 2TO NAC 3OUT 1TO NAC 3OUT 3CCCCTO NAC 3OUT 4CCCCTO NAC 3OUT 5CCCCCCC177cd22-1TO NAC 4OUT 2177cd22-2177cd22-3177cd22-6177cd22-5177cd22-4CCCCCC177cd23-3177cd24-4177cd25-4C177cd23-2177cd24-3177cd25-3C177cd23-1177cd24-2177cd25-2C115cd24-1TO NAC 5OUT 3CCCTO NAC 5OUT 4CCCC115cd25-1TO NAC 5OUT 5CCCCCCJeremiah Mundell, SET132057FIRE ALARM SYSTEMSLEVEL IVDate:ENGINEER OF RECORDJeremiah Mundell2500 MAITLAND CTR PKWYSUITE 105703-468-6100NADFireEngineering@vectorsecurity.com5/3/2021177cd21-3C177cd21-2C75cd21-1CTO NAC 2OUT 7CONNECTTO HORNSTOBE(21-4)115cd20-3C115cd20-2C15cd20-1C15cd20-4C15cd20-5C15cd20-6C15cd20-8C115cd20-7CTO NAC 5OUT 2DATE:SHEETREVISIONSFA-3SHEET NO.4SUBMITTALS PREPARED BY:VECTOR SECURITY NETWORKS2500 MAITLAND CTR PKWYSUITE 105MAITLAND, FL 32751703-468-6100DRAWN BY:JAM5/18/2021THIS DRAWING ANDDESIGNS SHALL NOT BEDUPLICATED, USED, ORDISCLOSED TO OTHERSFOR PROCUREMENT OROTHER PURPOSES,EXCEPT AS OTHERWISEAUTHORIZED BYCONTRACT, WITHOUTWRITTEN CONSENT OFVECTOR SECURITY, INCREPRODUCTIONS SHALLBEAR THIS NOTICE.LOWES 208 78-865 HIGHWAY 111 LA QUINTA CA FIRE ALARM SYSTEM UPGRADE 1""= 20'-0"NOTIFICATION LAYOUTFIRE ALARM SYSTEMAS-BUILT05/12/20221"=20'-0"DETAILMEZZANINE1"=20'-0"DETAILMEZZANINE Jeremiah Mundell, SET132057FIRE ALARM SYSTEMSLEVEL IVDate:ENGINEER OF RECORDJeremiah Mundell2500 MAITLAND CTR PKWYSUITE 105703-468-6100NADFireEngineering@vectorsecurity.com5/3/2021DATE:SHEETREVISIONSFA-4SHEET NO.5SUBMITTALS PREPARED BY:VECTOR SECURITY NETWORKS2500 MAITLAND CTR PKWYSUITE 105MAITLAND, FL 32751703-468-6100DRAWN BY:JAM5/18/2021THIS DRAWING ANDDESIGNS SHALL NOT BEDUPLICATED, USED, ORDISCLOSED TO OTHERSFOR PROCUREMENT OROTHER PURPOSES,EXCEPT AS OTHERWISEAUTHORIZED BYCONTRACT, WITHOUTWRITTEN CONSENT OFVECTOR SECURITY, INCREPRODUCTIONS SHALLBEAR THIS NOTICE.LOWES 208 78-865 HIGHWAY 111 LA QUINTA CA FIRE ALARM SYSTEM UPGRADE 1""= 20'-0"INITIATE LAYOUTFIRE ALARM SYSTEMDESIGNER NOTE:SCALE:CORRECT MOUNTINGMOUNT OCTAGON BOX WITH BEAMCLAMPS. DO NOT PENETRATETHE ROOF DECK.INCORRECT MOUNTINGCEILINGSMOKE DETECTORCONDUIT213FROM PANEL ORPREVIOUS DEVICETO NEXTDEVICE48"A.F.F.60"A.F.F.80" A.F.F. MIN TO LENS4S BOX2-GANG RING4S BOX2-GANG RING4S BOXSINGLE GANG RINGHORN/VISUALREMOTEANNUNCIATORMANUAL PULL STATIONFireAlarmHOUSINGHOUSING HINGED TOBACKPLATEBACKPLATEFIRE ALARM CABLESECURE CABLES TO STRUCTURAL MEMBERS INACCORDANCE WITH NEC 760.6.NOTE:ALL CABLE SHALL BE RUN PARALLEL ORPERPENDICULAR & SECURELY FASTENED TOSTRUCTURAL MEMBERS.DESIGNER NOTE:SCALE:96" A.F.F. MAX TO LENS3/8" FLEX CONDUITWP BELL BOX COVERWITH TAMPERPROOFSCREWSRIGID CONDUITGROUND LINE18" OR24" DEEPSCH 40 PVC1.ALL CONDUIT SIZE WILL BE DETERMINED BY WIRE FILL2.ALL ELECTRICAL BOXES WILL BE DETERMINED BY CONDUIT SIZE AND WIRE FILL.3.ALL EXTERIOR WP BELL BOXES TO HAVE TAMPERPROOF SCREWSOS&Y GATE VALVE TAMPERDESIGNER NOTE:SCALE:CORRECTCORRECTCORRECTALWAYS BREAK A WIRE BEFORE CONNECTING IT TOA FIRE ALARM DEVICE, NEVER LOOP AN UNBROKENWIRE UNDER ANY TERMINAL.CONNECT ONLY TWO WIRES UNDER EACHWIRE NUT OR TERMINAL.DESIGNER NOTE:SCALE:SLC LOOPDEVICE BEINGMONITORED(+)(-)FROM PANEL ORPREVIOUS DEVICETO NEXTDEVICE47KΩEOLFIRE STOP COMPOUNDMIN. 1" THICKNESS. (TYP)CERAMIC FIBER FILLFORMING MATERIAL. (TYP)TWO 1" CONDUITSHOLE IN FLOOR/WALLFIRE STOP COMPOUNDTWO 1" CONDUITSDESIGNER NOTE:SCALE:GRADETO FACPSCH 40 PVC3/8" FLEX CONDUITALL UNDERGROUND TO BE RODDEDAND RETAINER GLANDS USEDCONTROL VALVEWITH PIV STEMPIV TAMPER SWITCHDRY PIPE VALVE ASSEMBLYHIGH/LOW AIRPRESSURE SWITCHDRY PIPE AIR LINEFROM AIRCOMPRESSOR3/8" FLEX CONDUIT (TYPICAL)WP BELL BOX COVER WITHTAMPERPROOF SCREWS (TYPICAL)PRESSURE FLOWSWITCH3/8" FLEX CONDUITBUTTERFLY VALVETAMPER SWITCH3/4" EMT CONDUITWET PIPE VALVEASSEMBLY3/8" FLEX CONDUIT (TYPICAL)WP BELL BOX COVER WITHTAMPERPROOF SCREWS (TYPICAL)WATERFLOW SWITCHBUTTERFLY VALVETAMPER SWITCH 3/8 " FLEX CONDUIT3/4" EMT CONDUITDESIGNER NOTE:SCALE:INCORRECTINCORRECTINCORRECTDESIGNER NOTE:SCALE:DESIGNER NOTE:SCALE:DESIGNER NOTE:SCALE:DESIGNER NOTE:SCALE:DESIGNER NOTE:SCALE:DESIGNER NOTE:SCALE:DESIGNER NOTE:SCALE:DESIGNER NOTE:SCALE:CRF-300 RELAY MODULE & MMF-300 MONITORMODULE DUCT DETECTOR WIRING DIAGRAMNTSFIRE STOP THRU CONCRETE FLOOR/WALL11NTSMMF-300 ADDRESSABLE MODULE WIRING DIAGRAM13NTSTYPICAL MANUAL PULL STATION, REMOTE ANNUN. &HORN / VISUAL SURFACE MOUNT INSTALLATION DETAIL14NTSTAMPER CONNECTIONAT PIV W/ PULL BOX07NTSWIRING METHODS06NTSTYPICAL OS&Y TAMPER SWITCHGATE VALVE INSTALLATION DETAIL10NTSTYPICAL WET RISER MONITORINGDEVICE INSTALLATION DETAIL08NTSTYPICAL DRY RISER MONITORING DEVICEINSTALLATION DETAIL09NTSSD365(T) SMOKE DETECTOR WIRING03SURFACE MOUNTED SMOKE DETECTOR02SMOKE AND HEAT DETECTOR MOUNTING01MANUAL PULL STATION04CABLE FASTENING DETAIL05NTS12RTS151KEY TEST/RESET109FIELDINSTALLEDJUMPER(RED LED)ALARM24153(GREEN LED)NOT USED192011215112+–6D4120 DUCT SMOKEAUX OUT –ALARMR TESTR RESETACC +ACC –AUX OUT +171614AUX A, NOSUP, NOSUP, CALARM, NOALARM, CAUX B, NC1813763548INT/AUX-INT +24V DC -24V DC +AUX A, CAUX A, NCAUX B, NOAUX B, CFIELDINSTALLED4.7K RESISTORFIELDINSTALLEDJUMPERMMF-300 MONITOR MODULET2T1SLC +SLC -T9T8T7T6SUP A/B (-)SUP A/B (+)SUP A (+)SUP A (-)CRF-300 RELAY MODULET2T1SLC +SLC -T10T9T8T7COMM 1NO 2NC 2COMM 2T5T4UNUSEDNO 1T6NC 1RCDI1SMOKE 24VACCARRIER HVAC UNITCONTROL BOARDDI1CR* REFER TO MANUFACTURER WIRING DETAILS* REFER TO MANUFACTURER WIRING DETAILS* REFER TO MANUFACTURER WIRING DETAILSAS-BUILT05/12/2022 LOWE’S #0208 78-865 Highway 111 La Quinta, CA 92253 SUBMITTAL PREPARED BY: VECTOR SECURITY 2500 MAITLAND CENTER PARKWAY, SUITE 105 MAITLAND, FL 32751 866-608-3286 THIS IS TO CERTIFY that the Alarm Service Company indicated below is included by Underwriters Laboratories Inc. (UL) in its Product Directories as eligible to use the UL Listing Mark in connection with Certificated Alarm Systems. The only evidence of compliance with UL's requirements is the issuance of a UL Certificate for the Alarm System and the Certificate is current under UL's Certificate Verification Service. This Certificate does not apply in any way to the communication channel between the protected property and any facility that monitors signals from the protected property unless the use of a UL listed or Classified Alarm Transport Company is specified on the Certificate. CERTIFICATE OF COMPLIANCE VECTOR SECURITY INC 2000 ERICSSON DR WARRENDALE PA 15086-6507 VECTOR SECURITY INC 2000 ERICSSON DR WARRENDALE PA 15086-6507 The Alarm Service Company is Listed in the following Certificate Service Categories: File - Vol No. CCN Listing Category BP4558 - 1 BP8466 - 1 BP5046 - 1 BP4111 - 1 S2535 - 1 ***THIS CERTIFICATE EXPIRES ON 31-MAR-2022 *** "LOOK FOR THE UL ALARM SYSTEM CERTIFICATE" CPVX CVSG CVSU CVWY UUFX [Burglar Alarm Systems] Central Station [Burglar Alarm Systems] Mercantile [Burglar Alarm Systems] Monitoring Station, Residential [Burglar Alarm Systems] Residential Alarm Systems [Signal and Fire Alarm Equipment and Services] (Protective Signaling Services) Central Station WARRENDALE, PA Alarm Service Company: (544986-001)Service Center: (544986-001) Listed Service From: Applicant ID No: Service Center No: Expires: 1553948-000 7 31-MAR-2022 DF-60957:C • 7/16/2018 — Page 1 of 4 ES-200X Intelligent Addressable FACP with Communicator Addressable Fire Alarm Control Panels DF-60957:C General The ES-200X is the latest intelligent addressable Fire Alarm Control Panel (FACP) from Fire•Lite Alarms and is a direct replacement for the MS-9200UDLS. The ES-200X comes with a pre-installed com- municator and supports up to 198 addressable devices (99 detec- tors and 99 modules). With an extensive list of powerful features, the ES-200X programs just like Fire•Lite’s other addressable products, yet fits into applications previously served only by conventional pan- els. The pre-installed IPOTS-COM is a dual technology (POTS and IP) communicator. The POTS transmits system status (alarms, troubles, AC loss, etc.) to a Central Station via the public switched telephone network. The IP communicator’s internet monitoring capability sends alarm signals over the Internet saving the monthly cost of two dedi- cated business telephone lines. Although not required, the second- ary telephone line may be retained providing backup communication over the public switched telephone line. Optional cellular reporting is available using the CELL-MOD or CELL-CAB-FL. Remote and local programming of the control panel is possible using the FS-Tools Upload/Download utility. Programming databases can be uploaded/downloaded via the panel’s USB port (and USB cable) or via an ethernet connection using the IPOTS-COM communicator. The USB port also allows for the download or upload of the entire program, history file, walk-test data, current status and system volt- ages by means of a USB flash drive. The power supply and all electronics are contained on a circuit board supported on a new quick install chassis and housed in a metal cabinet. Available accessories include local and remote upload/download software, remote annunciators, and reverse polar- ity/city box transmitter (4XTMF). Features • Listed to UL Standard 864, 10th edition • Pre-installed IPOTS-COM Ethernet IP and POTS (Plain Old Tele- phone Service) Central Station Communicator over AlarmNet • Optional CELL-MOD or CELL-CAB-FL GSM Central Station Communicator over AlarmNet® • Automated activation of the ECC-50/100 Emergency Command Center • ECC-FFT Firefighter Telephone option • Compatible with SWIFT® wireless devices • Auto-programming (learn mode) reduces installation time. Reports two devices set to the same address • Four built-in, independently programmable Style Z (Class A) or Style Y (Class B) NAC circuits • Selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices • Notification Appliance Circuit End of Line resistor matching • Four programmable function keys for ease of maintenance • Two programmable relays and one fixed trouble relay • Built-in Programmer • Integral 80-character LCD display with backlighting • Real-time clock/calendar with automatic daylight savings control • History file with 1,000 event capacity • Addressable sounder base compatibility • Multi-criteria detector (smoke, heat, CO) with programmable response • Control module delay timer • Automatic detector sensitivity testing (NFPA 72 compliant) • Automatic device type-code verification • Point trouble identification • Waterflow selection per module point • Alarm verification selection per detector point • Maintenance alert warns when smoke detector dust accumula- tion is excessive • One-person audible or silent walk test with walk-test log and printout • System alarm verification selection per detector point • PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA 72 compliant) • Up to 16 ANN-BUS annunciators- 8 per each ANN-Bus • Remote Acknowledge, Alarm Silence, Reset and Drill via addressable modules or remote annunciator • Upload/Download of program and data via USB with optional FS- Tools Programming Utility SLC COMMUNICATION LOOP • Supports LiteSpeed™ and CLIP protocols • SLC operates up to 10,000 ft. (3,000 m) in LiteSpeed mode with twisted, unshielded wire • Single addressable SLC loop which meets NFPA Class B and Class A requirements • 198 addressable device capacity (99 addressable detectors and 99 modules) • Compatible with Fire•Lite’s addressable devices (refer to the SLC Wiring Manual) NOTIFICATION APPLIANCE CIRCUITS (NACS) • Four independently programmable output circuits. Circuits can be configured for the following outputs: –Style Y (Class B) –Style Z (Class A) • Silence Inhibit and Autosilence timer options • Continuous, March Time, Temporal, or California code for main circuit board NACs with two-stage capability • Selectable strobe synchronization per NAC • 2.5 A special application, 250mA regulated, total power for NACs NOTE: Maximum or total 24VDC system power shared between all NAC circuits and the ANN-BUS is 2.7 A Page 2 of 4 — DF-60957:C • 7/16/2018 PROGRAMMING AND SOFTWARE • Autoprogramming (learn mode) reduces installation time • Custom English labels (per point) may be manually entered or selected from an internal library file • Two programmable Form-C relay outputs • 99 software zones • Continuous fire protection during online programming • Program Check automatically catches common errors not linked to any zone or input point •OFFLINE PROGRAMMING: Create the entire program in your office using FS-Tools, a Windows®-based software package, and upload/download system programming locally. Offline program- ming requires an ethernet connection. FS-Tools is available on www.firelite.com. User interface LED INDICATORS • Fire Alarm (red) • CO Alarm (red) • AC Power (green) • Supervisory (yellow) • Trouble (yellow) • Ground fault (yellow) • Battery fault (yellow) • Disabled (yellow) • Maintenance (yellow) • Communication (yellow) • Alarm Silenced (yellow) • F1-F4 Programmable Function Keys (yellow) KEYPAD • 16 key alpha-numeric pad • Acknowledge • Alarm Silence • Drill (Manual Evacuate) • Four (4) programmable function keys • Reset (lamp test) PRODUCT LINE INFORMATION ES-200X: Addressable Fire Alarm Control Panel with one SLC loop. Includes main circuit board with display, pre-installed communicator, chassis with transformer, backbox with door, plastic bag containing screws, cables, key, etc. (For ES-200XC, refer to DF-60958.) FS-Tools: Programming software for Windows®-based PC com- puter. Available for download at www.firelite.com. CELL-CAB-FL/CELL-MOD: Optional GSM communicators. IPOTS-COM: Dual technology (POTS and IP) communicator. (replacement board) DP-ES-R: Optional dress panel for the ES-200X. TR-CE: Optional trim ring for semi-flush mounting. BB-2F: Optional cabinet for one or two modules. BB-6F: Optional cabinet for up to six modules mounted on CHS-6 chassis. BB-26: Battery backbox, holds up to two 25 AH batteries and CHG- 75. BB-55F: Battery box, houses two 55 AH batteries CHS-6: Chassis, mounts up to six multi-modules in a BB-6F cabinet. CHG-75: Battery charger for lead-acid batteries with a rating of 25 to 75 AH. CHG-120F: Remote battery charging system for lead-acid batteries with a rating of 55 to 120 AH. Requires additional BB-55F for mount- ing. BAT Series: Batteries, see data sheet DF-52397. PRN Series: UL listed compatible event printer. Uses tractor-fed paper. OPTIONAL MODULES 4XTMF Reverse Polarity Transmitter Module: Provides a super- vised output for local energy municipal box transmitter, alarm and trouble. Includes a disable switch and disable trouble LED. PWRMOD24 Power Expander Module: Optional power module. Increases alarm power output to 6 amps. COMPATIBLE ANNUNCIATORS ANN-80: Remote LCD annunciator mimics the information dis- played on the FACP LCD display. Recommended wire type is un- shielded. ANN-100: Remote LCD annunciator mimics the information dis- played on the FACP LCD display. Recommended wire type is un- shielded. For use in FM applications only. ANN-I/O: LED Driver Module provides connections to a user sup- plied graphic annunciator. (See DF-52430.) ANN-LED: Annunciator Module provides three LEDs for each zone: Alarm, Trouble, and Supervisory. Ships with red enclosure. (See DF- 60241.) ANN-RLED: Provides alarm (red) indicators for up to 30 input zones or addressable points. (See DF-60241.) ANN-RLY: Relay Module provides 10 programmable Form-C relays. Can be mounted inside the cabinet. (See DF-52431.) ANN-S/PG: Serial/Parallel Printer Gateway module provides a con- nection for a serial or parallel printer. (See DF-52429.) ADDRESSABLE DEVICES All feature a polling LED and rotary switches for addressing. SD365: Addressable low-profile photoelectric smoke detector. Lite- Speed only. SD365-IV: Addressable low-profile photoelectric smoke detector. Ivory. LiteSpeed and CLIP mode. SD365T: Addressable low-profile photoelectric smoke detector with thermal sensor. LiteSpeed only. SD365T-IV: Addressable low-profile photoelectric smoke detector with thermal sensor. Ivory. LiteSpeed and CLIP mode. SD365R: Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing. LiteSpeed only. SD365R-IV: Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing. Ivory. Lite- Speed and CLIP mode. H365: Low-profile 135°F fixed thermal sensor. LiteSpeed only. H365-IV: Low-profile 135°F fixed thermal sensor. Ivory. LiteSpeed and CLIP mode. H365R: Low-profile, intelligent, rate-of-rise thermal sensor. Lite- Speed only. H365R-IV: Low-profile, intelligent, rate-of-rise thermal sensor. Ivory. LiteSpeed and CLIP mode. H365HT: Low-profile intelligent 190°F/88°C fixed thermal sensor. LiteSpeed only. H365HT-IV: Low-profile intelligent 190°F/88°C fixed thermal sensor. Ivory. LiteSpeed and CLIP mode. Legacy Devices CP355: Addressable low-profile ionization smoke detector. SD355: Addressable low-profile photoelectric smoke detector. SD355T: Addressable low-profile photoelectric smoke detector with thermal sensor. SD355R: Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing. SD355CO: Addressable, low-profile device that provides fire, heat, and carbon monoxide (CO) detection. H355: Fast-response, low-profile heat detector. DF-60957:C • 7/16/2018— Page 3 of 4 H355R: Fast-response, low-profile heat detector with rate-of-rise option. H355HT: Fast-response, low-profile heat detector that activates at 190°F/88°C. AD355: Low-profile, intelligent, “Adapt” multi-sensor detector (B350LP base included). B200S: Programmable, addressable sounder base. B200SR: Addressable sounder base. BEAM355: Intelligent beam smoke detector. BEAM355S: Intelligent beam smoke detector with integral sensitiv- ity test. D355PL: InnovairFlex low-flow non-relay duct-detector housing; includes SD355R. DNR: InnovairFlex low-flow non-relay duct-detector housing. (Order SD355R/SD365R separately.) DNRW: InnovairFlex low-flow non-relay duct-detector housing, with NEMA-4 rating. Watertight. (Order SD355R/SD365R separately.) Addressable Modules MMF-300: Addressable Monitor Module for one zone of normally- open dry-contact initiating devices. Mounts in standard 4.0" (10.16 cm.) box. Includes plastic cover plate and end-of-line resistor. Mod- ule may be configured for either a Style B (Class B) or Style D (Class A) IDC. MDF-300: Dual Monitor Module. Same as MMF-300 except it pro- vides two Style B (Class B) only IDCs. MMF-301: Miniature version of MMF-300. Excludes LED and Style D option. Connects with wire pigtails. May mount in device backbox. MMF-302: Similar to MMF-300. Addressable Monitor Module for one zone of conventional two-wire detectors. Requires resettable 24 VDC power. Refer to the Device Compatibility Document for listed compatible devices and quantity limitation. CMF-300: Addressable Control Module for one Style Y/Z (Class B/ A) zone of supervised polarized Notification Appliances. Mounts directly to a 4.0" (10.16 cm.) electrical box. NAC option requires external 24 VDC to power notification appliances. CRF-300: Addressable relay module containing two isolated sets of Form-C contacts, which operate as a DPDT switch. Mounts directly to a 4.0" (10.16 cm.) box, surface mount using the SMB500. BG-12LX: Addressable manual pull station with interface module mounted inside. I300: This module isolates the SLC loop from short circuit conditions (required for Style 6 or 7 operation). ISO-6: Six-fault isolator module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. SMB500: Used to mount all modules except the MMF-301 and M301. MMF-300-10: Ten-input monitor module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. MMF-302-6: Six-zone interface module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. CMF-300-6: Six-circuit supervised control module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. CRF-300-6: Six-relay control module (Form-C relays). Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. SWIFT Wireless Devices W-GATE: LiteSpeed Wireless Gateway W-SD355: LiteSpeed intelligent, wireless photo detector. W-H355R: LiteSpeed intelligent wireless rate of rise (135°) heat detector. W-SD355T: Intelligent wireless photo/heat detector. W-H355: LiteSpeed intelligent wireless fixed-temperature (135°) heat detector. W-MMF: LiteSpeed Intelligent wireless monitor module. W-CRF: LiteSpeed Intelligent wireless relay module. W-BG12LX: LiteSpeed Intelligent wireless pull station. WAV-RL, WAV-WL,WAV-CRL,WAV-CWL: LiteSpeed Intelligent AV bases. W-USB: Wireless USB radio/antenna dongle that plugs into the USB port of a PC running SWIFT Tools. SWIFT Tools: Programming and diagnostic utility for the Wireless Gateway and devices. Available for download from firelite.com. NOTE: For more information on Compatible Addressable Devices for use with the ES-200X, see the following data sheets (document num- bers): SD365 Series (DF-61010), H365 Series (DF-61011), AD355 (DF-52386), BG-12LX (DF-52013), CMF-300-6 (DF-52365), CRF-300-6 (DF-52374), CMF/CRF Series (DF-52130), CP355 (DF-52383), H355 Series (DF-52385), I300 (DF-52389), ISO-6 (DF-60485), MMF-300 Series/MDF-300 (DF-52121), MMF-300-10 (DF-52347), MMF-302-6 (DF-52356), SD355/SD355T (DF-52384), and SLC Wiring Manual (51309). NOTE: Legacy 300 Series detection devices such as the CP300/CP350, SD300(T)/SD350(T) and older modules such as the M300, M301, M302, C304, and BG-10LX are not compatible with LiteSpeed polling. If the SLC contains one of these devices, polling must be set for standard CLIP protocol. Please consult factory for further information on previous 300 Series devices. ADDRESSABLE DEVICE ACCESSORIES End-of-Line Resistor Assembly (R-47K and R-3.9K): The 47k ohm assembly supervises the MMF-300, MDF-300, MMF-301, and CMF-300 module circuits. The 3.9k ohm assembly supervises the MMF-302 module circuit. These resistors are included with each module. Power Supervision Relay: Supervises the power to 4-wire smoke detectors and notification appliances. Wiring Requirements While shielded wire is not required, it is recommended that all SLC wiring be twisted-pair to minimize the effects of electrical interfer- ence. Refer to the panel manual for wiring details. AlarmNet®, Fire-Lite® Alarms, SWIFT®, and System Sensor® are registered trademarks of Honeywell International Inc. Microsoft® and Windows® are registered trademarks of the Microsoft Corporation. ©2018 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Page 4 of 4 — DF-60957:C • 7/16/2018 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com Country of Origin: USA SYSTEM SPECIFICATIONS System Capacity • Intelligent Signaling Line Circuits................................................1 • Addressable device capacity..................................................198 • Programmable software zones.................................................99 • Annunciators.............................................................................16 Electrical Specifications AC Power: Operates in either 120 or 240 VAC, 50/60 Hz, 3.25 A, auto-sensing- no switch required. Wire size: minimum 14 AWG (2.00 mm2) with 600 V insulation. Nonpower-limited, supervised. Battery: Two 12 V 18 AH lead-acid batteries. Battery Charger Capacity: 7-18 AH (ES-200X cabinet holds maximum of two 18 AH batteries.) Communication Loop: Supervised and power-limited. Notification Appliance Circuits: Terminal Block provides connec- tions for four NACs, Style Y (Class B) or Style Z (Class A). Special Application power. Power-limited, supervised circuitry. Maximum signaling current per circuit: 2.5 amps special application, 250mA regulated. End-of-Line Resistor: 4.7k ohm, ½ watt (P/N 71252 UL listed) for Style Y (Class B) NAC; system capable of 1.9 kΩ - 22 kΩ ELR range. Refer to the Fire•Lite Device Compatibility Document for listed compatible devices. Two Programmable Relays and One Fixed Trouble Relay: Con- tact rating: 2.0 A @ 30 VDC (resistive), 0.5 A @ 30 VAC (resistive). Form-C relays, non-power-limited, non-supervised. Cabinet Specifications Door: 19.26" (48.92 cm.) high x 16.82" (42.73 cm.) wide x 0.72" (1.82 cm.) deep. Backbox: 19.00" (48.26 cm.) high x 16.65" (42.29 cm.) wide x 5.25" (13.34 cm.) deep. Trim Ring (TR-CE): 22.00" (55.88 cm.) high x 19.65" (49.91 cm.) wide. Shipping Specifications Weight: 26.9 lbs. (12.20 kg.) Dimensions: 20.00” (50.80 cm.) high x 22.5” (57.15 cm.) wide x 8.5” (21.59 cm.) deep. Temperature and Humidity Ranges This system meets NFPA requirements for operation at 0 – 49°C/32 – 120°F and at a relative humidity 93% ± 2% RH (noncondensing) at 32°C ± 2°C (90°F ± 3°F). However, the useful life of the system's standby batteries and the electronic components may be adversely affected by extreme temperature ranges and humidity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of 15 – 27°C/60 – 80°F. NFPA Standards The ES-200X complies with the following NFPA 72 Fire Alarm Sys- tems requirements: – LOCAL (Automatic, Manual, Waterflow and Sprinkler Supervi- sory). – AUXILIARY (Automatic, Manual and Waterflow) (requires 4XTMF). – REMOTE STATION (Automatic, Manual and Waterflow) (Where a DACT is not accepted, the alarm, trouble and supervi- sory relays may be connected to UL 864 listed transmitters. For reverse polarity signaling of alarm and trouble, 4XTMF is required.) – PROPRIETARY (Automatic, Manual and Waterflow). – CENTRAL STATION (Automatic, Manual and Waterflow, and Sprinkler Supervised). –OT, PSDN (Other Technologies, Packet-switched Data Net- work) – IBC 2012, IBC 2009, IBC 2006, IBC 2003, IBC 2000 (Seismic). – CBC 2007 (Seismic) Agency Listings and Approvals The listings and approvals below apply to the basic ES-200X control panel. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. •UL: S624 •FM approved •CSFM: 7165-0075:500 •FDNY: COA #6261 NOTE: See DF-60958 for ULC-listed model. DF-52417:D • 3/15/2018 — Page 1 of 2 ANN-80 80-Character Serial LCD Annunciator Annunciators DF-52417:D • B-90 General The ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions. The ANN-80 and the FACP communicate over a two-wire serial interface employ- ing the ANN-Bus communication format. Connected devices are powered, via two additional wires, by either the host FACP or a remote UL-listed, filtered power supply. The ANN-80 is red; for white, order ANN-80-W. The ANN-80 displays English-language text of system point informa- tion including device type, zone, independent point alarm, trouble or supervisory status, as well as any custom alpha labels programmed into the control panel. It includes control switches for remote control of critical system functions. (A keyswitch prevents unauthorized operation of the control switches.) Up to eight ANN-80s may be connected to the ANN-Bus of each FACP. No programming is required, which saves time during system commissioning. Features • Listed to UL Standard 864, 9th Edition •Backlit 80-character LCD display (20 characters x 4 lines) •Mimics all display information from the host panel •Control switches for System Acknowledge, Signal Silence, Drill, and Reset •Control switches can be independently enabled or disabled at the FACP •Keyswitch enables/disables control switches and mechanically locks annunciator enclosure •Keyswitch can be enabled or disabled at the FACP •Enclosure supervised for tamper •System status LEDs for AC Power, Alarm, Trouble, Supervisory, and Alarm Silence •Local sounder can be enabled or disabled at the FACP •ANN-80 connects to the ANN-Bus terminal on the FACP and requires minimal panel programming •Displays device type identifiers, individual point alarm, trouble, supervisory, zone, and custom alpha labels •Time-and date display field •Surface mount directly to wall or to single, double, or 4" square electrical box •Semi-flush mount to single, double, or 4" square electrical box. Use ANN-SB80KIT for angled view mounting •Can be remotely located up to 6,000 feet (1,800 m) from the panel •Backlight turns off during AC loss to conserve battery power but will turn back on if an alarm condition occurs •May be powered by 24 VDC from the host FACP or by remote power supply (requires 24 VDC) • Up to eight ANN-80s can be connected on the ANN-Bus Controls and Indicators •AC Power •Alarm • Trouble • Supervisory • Alarm Silenced Specifications •Operating voltage range: 18 VDC to 28 VDC •Current consumption @ 24 VDC nominal (filtered and non- resettable): 40 mA maximum •Ambient temperature: 32°F to 120°F (0°C to 49°C) •Relative humidity: 93% ± 2% RH (non-condensing) at 32°C ± 2°C (90°F ± 3°F) •5.375” (13.65 cm.) high x 6.875” (17.46 cm.) wide x 1.375” (3.49 cm.) deep •For use indoors in a dry location •All connections are power-limited and supervised The ANN-Bus POWERING THE DEVICES ON THE ANN-BUS FROM AUXIL- IARY POWER SUPPLY The ANN-Bus can be powered by an auxiliary power supply when the maximum number of ANN-Bus devices exceeds the ANN-Bus power requirements. See the FACP manual for more information. ANN-BUS DEVICE ADDRESSING Each ANN-Bus device requires a unique address (ID Number) in order to communicate with the FACP. A maximum of 8 devices can be connected to the FACP ANN-Bus communication circuit. See the FACP manual for more information. WIRE REQUIREMENTS: COMMUNICATIONS CIRCUIT The ANN-80 connects to the FACP ANN-Bus communications cir- cuit. To determine the type of wire and the maximum wiring distance that can be used with FACP ANN-Bus accessory modules, it is nec- essary to calculate the total worst case current draw for all modules on a single 4-conductor bus. The total worst case current draw is calculated by adding the individual worst case currents for each module. NOTE: For total worst case current draw on a single ANN-Bus refer to appropriate FACP manual. Fire-Lite® Alarms is a registered trademark of Honeywell International Inc. ©2018 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Page 2 of 2 — DF-52417:D • 3/15/2018 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com Country of Origin: USA WIRE REQUIREMENTS: POWER CIRCUIT • 14 to 18 AWG (0.75 - 2.08 mm 2) wire for 24 VDC power circuit is acceptable. Power wire distance limitation is set by 1.2 volt maxi- mum line drop form source to end of circuit. • All connections are power-limited and supervised. • A maximum of eight ANN-80 modules may be connected to this circuit. Ordering Options ANN-80: Red 80 character LCD Annunciator. ANN-80-W: White, 80 character LCD Annunciator. ANN-SB80KIT-R: Red surface mount backbox with angled wedge. ANN-SB80KIT-W: White surface mount backbox with angled wedge. Agency Listings and Approvals The listings and approvals below apply to the ANN-80. In some cases, certain modules may not be listed by certain approval agen- cies, or listing may be in process. Consult factory for latest listing status. •UL: S2424 • FM approved •CSFM: 7120-0075:0211 •MEA: 442-06-E DF-61093:C • 3/10/2021 — Page 1 of 2 FL-PS6(C) & FL-PS10(C) 6 Amp and 10 Amp, 24 Volt Remote Power Supplies Power Supplies/Accessories DF-61093:C • D-60 General The PS Series is a remote power supply line from Fire•Lite Alarms and is a direct replacement for the FCPS-24FS6/8 Series. The FL- PS6(C) is a 6 amp and the FL-PS10(C) is a 10 amp, remote power supply with battery charger that may be connected to any 12 or 24 volt fire alarm control panel (FACP) or used as a standalone power supply. The PS Series provides 24 VDC power for NACs (notifica- tion appliance circuits) configured as either Class B or Class A (requires the ZNAC-PS option card) with multiple sync protocol options. The PS Series also provides auxiliary power, constant or resettable, suited for detectors, annunciators, door holders, and other fire alarm system peripherals. The PS Series cabinet can hold two 7 AH or 18 AH batteries and can charge up to 33 AH batteries in a separate cabinet. Features • Up to five (6 amp model) or seven (10 amp model) inde- pendently-configurable, power-limited output circuits for: –Class B and/or Class A NACs –Class B and/or Class A resettable or non-resettable 24V auxil- iary power –door holder power • Converts from Class B to Class A wiring without losing any out- puts using the ZNAC-PS converter card (sold separately) • Optimal for powering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated power • Configurable for ANSI® Temporal 3 or Temporal 4 coded output • UL-Listed NAC synchronization using System Sensor®, Whee- lock®, Gentex®, or AMSECO® appliances • Synchronization can be triggered from FACP NAC/remote sync outputs, cascaded power supply, or a control module, single or multi, which may be housed within the power supply cabinet • Ability to cascade up to four power supplies • Two (6 amp model) or three (10 amp model) fully-isolated input/ control circuits which can be programmed to any output • Two Form C normally-closed trouble relays for AC Trouble and General Trouble, Ground Fault relay available on Canadian mod- els only • 6 or 10 amp full load output, respectively, with 3 A maximum/cir- cuit • Individual NAC power and trouble LEDs for diagnostic efficiency • Trouble history modes for diagnostic support • Wide range end-of-line supervision value (normal: 2K-27K ohms) • Selectable earth fault detection (enable or disable) • AC trouble report delay timer • Completely configurable via onboard DIP switches, no extra soft- ware required • Self-contained in compact, locking cabinet constructed of heavy gauge steel with a corrosion-resistant powder coat chip and scratch-resistant finish • Cabinet designed with ten double knockouts and a removable door for ease of installation and wiring • Includes integral battery charger capable of charging up to 33 AH batteries • Cabinet can house two 7 AH or 18 AH batteries • Battery charger may be disabled via DIP switch for applications requiring larger batteries and external battery charger • Removable terminal blocks accommodate up to 12 AWG (3.1mm2) wire • Works with any UL 864 FACP which utilizes an industry-standard reverse-polarity notification circuit • Optional devices include addressable control, monitor, and relay modules and power-supervision relay (EOLR-1) Standards and Codes The FL-PS Series comply with the following standards: •NFPA 72 National Fire Alarm Code •UL 864 Standard for Control Units for Fire Alarm Systems (NAC expander mode), 10th Edition •UL 1481 Power Supplies for Fire Alarm Systems •IBC 2009 (when using SEISKIT-MULTI-1) •CBC 2007 (when using SEISKIT-MULTI-1) Agency Listings and Approvals These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. •UL Listed: S2424 •ULC Listed: S2424 (FL-PS6/10C) •CSFM Approved: 7315-0075:0510 •FDNY Approved •FM Approved Fire•Lite® Alarms and System Sensor® are registered trademarks of Honeywell International, Inc. Wheelock® is a registered trademark of Cooper Technologies Company. Gentex® is a registered trademark of Gentex Corporation. AMSECO® is a registered trademark of Potter Electric Signal Company, LLC. ANSI® is a registered trademark of the American National Standards Institute, Inc. ©2020 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Page 2 of 2 — DF-61093:C • 3/10/2021 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com Country of Origin: USA SYSTEM SPECIFICATIONS Primary (AC) Power: •FL-PS6(C): 120 VAC, 50/60 Hz, 5.0A maximum •FL-PS10(C): 120VAC, 50/60 Hz, 6.2 A maximum •Wire Size: #12-14 AWG with 600 V insulation Command Input Circuit: •Trigger Input Voltage: 9 to 32 VDC •Trigger Current: 2.0 mA (16 - 32 V); Per Input: 1.0 mA (9 - 16 V) Trouble Contact Rating: 4 A at 24 VDC Output Circuits: • 24 VDC filtered, regulated • FL-PS6: TB8-TB9 – 1A Regulated, 3A special applications; TB10-TB12 – 0.3A Regulated, 3A special applications • FL-PS10: TB8-TB11 – 1.5A Regulated, 3A special applications; TB12-TB14 – 0.3A Regulated, 3A special applications • 6.0 A (FL-PS6) or 10.0 A (FL-PS10) maximum total continuous current for all outputs Secondary Power (Battery) Charging Circuit: • Supports lead-acid batteries only • Float-charge voltage: 27.6 VDC • Maximum current charge: 1.5 A • Maximum battery capacity: 18 AH (inside cabinet) • Maximum battery charging capacity: 33 AH (external cabinet) Physical: •Dimensions: 20.0”H x 14.5”W x 3.5”D (cm: 50.8H x 36.83W x 8.9D) •Weight: with two 7Ah batteries is 24 pounds (10.9 kg), with two 18 AH batteries is 39 pounds (17.7 kg) Ordering Information FL-PS6: 6.0 A, 120 VAC remote charger power supply in a lock- able, metal enclosure FL-PS6C: Same as above, ULC-listed model FL-PS10: 10.0 A, 120 VAC remote charger power supply in a lock- able, metal enclosure FL-PS10C: Same as above, ULC-listed model ZNAC-PS: Optional Class A output converter module CMF-300: Addressable Control Module for one Class B or Class A zone of supervised, polarized Notification Appliances. Notification Appliance Circuit option requires external 24 VDC to power notifica- tion appliances. CRF-300: Addressable relay module containing two isolated sets of Form-C contacts, which operate as a DPDT switch MMF-300: Addressable Monitor Module for one zone of normally open dry-contact initiating devices. Includes plastic cover plate and end-of-line resistor. Module may be configured for either a Class B or Class A IDC. MDF-300: Dual Monitor Module. Same as MMF-300 except it pro- vides two inputs for Class B wiring only CDRM-300: Provides two monitored inputs and two Form-C relays. Functions in Class B wiring only. CMF-300-6: Six-circuit supervised control module CRF-300-6: Six Form-C relay control module EOLR-1: 12/24 VDC end-of-line relay for monitoring four-wire smoke detector power BAT-1270-BP: Battery, 12 volt, 7.0 AH, 5-pack (two required). BAT-12180-BP: Battery, 12 volt, 18AH, 2-pack BAT-12330: Battery, 12 volt, 33AH SEISKIT-MULTI-1: Seismic kit for the FL-PS Series. Includes bracket and hardware for two 7AH or two 18AH batteries. Fire Alarm Communicators HWF2-COM Series LTE / IP Single or Dual Path Commercial Fire Communicators HFW2V-COM HFW2A-COM The HWF2-COM Series LTE / IP fire communicators are single or dual path commercial fire alarm communicators that offer Contact ID reporting with any FACP (fire alarm control panel) with a built-in dialer. Models include: •HWF2V-COM (Verizon LTE & IP) •HWF2A-COM (AT&T LTE & IP) Both models connect directly to the primary or secondary communication ports of a fire panel’s digital alarm communicator transmitter (DACT). Three selectable reporting paths include: LTE cellular only, IP only, or IP primary with LTE cellular backup. All signals from the HWF2-COM Series are delivered to the AlarmNet® network control center which routes highly encrypted, cybersecured Ethernet data packets via a customer-provided Internet connection or LTE cellular network to the appropriate central station. The AlarmNet® network control center is fully redundant and monitored 24/7. Installation and programming are easy through the AlarmNet 360® website, using the handheld 7720P Programming tool, or using the control panel's programming mode (for panels that support this option). FEATURES & BENEFITS •LTE and IP connection tested every day • Three selectable reporting paths: LTE cellular only, IP only, or IP Primary with LTE cellular backup • Requires no change to the existing FACP configuration • Connects directly to the primary and secondary telephone ports of a DACT • Plan choices range from 5 minute, 60 minute, 6 hour, and 24 hour supervision intervals • Operates over the following communication protocols: LTE, HSPA+(4G) HSPA (3G) • Works over any type of customer provided Ethernet 10/100 based network connection (LAN or WAN), DSL model or cable modem • Data transmits over standard Contact ID protocol but is secured with the industry's advanced encryption standard (AES 256 bit) • Supports both dynamic (DHCP) or public and private Static IP addressing • Reliable connection: IP and cellular connection tested every day • Built-in, standalone power supply module. Onboard charging circuit design accommodates battery backup. Includes primary power and battery supervision •Diagnostic LEDs indicate signal strength and status • Choice of LTE provider services • QOS: Quality of Service diagnostics via AlarmNet conveys vital communicator information including signal strength, message path used, and when the message was received • 7720P Handheld programmer for easy setup Page 2 of 3 — DH-62010:A • 5/31/2019 The HWF2-COM LTE / IP fire communicators operate over the most modern and common cellular networks including LTE, 4G and3G. They connect to any customer provided Ethernet 10/100 base network connection (LAN or WAN), DSL or cable modem. Selectable reporting path feature allows the radios to be configured for a single or dual path, while providing appropriate supervision intervals based on NFPA 72 requirements. Selectable paths and supervision timing intervals include: Operation When an event occurs, the FACP goes off-hook to dial the central station. The HWF2-COM Series dialer capture module detects the offhook condition and provides the fire panel with a dial tone. When the fire panel detects the dial tone, it begins dialing the central station. After the dialing is completed, the dialer capture module returns a signal to the fire panel. The fire panel then sends the Contact ID reports to the dialer capture module, which in turn sends a signal after the report is successfully received from the fire panel. The dialer capture nodule sends the Contact ID reports to the HWF2-COM Series communications module. When all the reports are sent, the fire panel goes on-hook. The HWF2-COM Series communications module then transmits the messages to the central station either over the LTE network or the Internet (depending on configuration). Fire Communicator / Panel Capability The HWF2-COM Series is compatible with fire alarm control panels that use the Contact ID communications format as described in the SIA DC-05 standard. Easy to Program The HWF2-COM communicator can be pre-programmed using the 7720P programmer to enter all central station information. This is saved to the HWF2-COM communicator panel memory. When the HWF2-COM is installed at the site and connected to the Internet/ Intranet, it registers with the AlarmNet Receiver. For most installations, the only required parameters are: • Primary City ID (two digits), obtained from your monitoring station • Primary Central Station ID (two digits), obtained from your monitoring station • Primary Subscriber ID (four digits), obtained from your monitoring station • Communication Module MAC ID, and MAC CRC number located on the outside of the box and inside of the module All parameters are assigned by the monitoring station. AlarmNet AlarmNet communications technology provides a highly reliable alternative for the transmission of alarm signals. The network provides extensive coverage in the United States and Canada. The AlarmNet Network Control Center processes signals from powerful servers in multiple locations equipped with 24/7 infrastructure support. Redundant hardware servers, real-time backup databases, and generators with battery backup at all locations ensure continuity of service. Signals from AlarmNet are transmitted to central station receivers using multiple communication paths consisting of the Internet, LTE radio network, or toll free plain old telephone service (POTS). Visit AlarmNet.com to learn more. Installation Requirements, UL Compliance To meet UL864/NFPA requirements, ensure the following: • HWF2-COM Series must be installed in accordance with the National Fire Protection Association (NFPA) standards 70 and 72 •HWF2-COM Series must be mounted in the same room and within 20 feet of the fire panel. • HWF2-COM Series and all equipment used for the IP connection (e.g., router, hub, modem, etc) must be UL-listed, powered from an unswitched branch circuit, and be provided with appropriate standby power. • HWF2-COM Series must use the 7AH battery (not included) to provide 24 hour backup capability SELECTABLE PATH DESCRIPTION SUPERVISION TIMES 2010 Cell Single path, cellular 5 Minutes 2010 IP Single path, IP 5 Minutes 2010 IP & Cell Dual path, IP and cellular 24 Hours 2013 Cell Single path, cellular 60 Minutes 2013 IP Single path, IP 60 Minutes 2013 IP & Cell Dual path, IP and cellular 6 Hours HWF2-COM Series Technical Specifications DH-62010 | A | 05/19 ©2019 Honeywell International Inc. AlarmNet® and AlarmNet 360® are registered trademarks of Honeywell International Inc. ©2019 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. We try to keep our product information up-to- date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. Country of origin: USA Honeywell Power Products 12 Clintonville Road Northford, CT 06472-1610 877.HPP.POWR www.honeywellpower.com ELECTRICAL Transformer: Primary: 120VAC, 60Hz, 0.5A Secondary: 18VDC, 50VA Battery: One 12 V 7.0 AH lead-acid battery: (not supplied) Battery charging current: 1 Amp maximum Battery discharge current: Standby 230mA, Active 950mA CABINET SPECIFICATIONS Dimensions: 14.875" H x 12.75" W x 3.0" D (37.8cm H x 32.4cm W x 7.6cm D) Color: Red SHIPPING DIMENSIONS Weight: 5.3 lbs (6.94kg) Dimensions: 15.625" H x 13.79" W x 9.25" D (39.7cm H x 34.9cm W x 23.9cm D) TEMPERATURE AND HUMIDITY RANGES This system meets NFPA requirements for operation at 0 - 49°C/32-120°F and at a relative humidity 93%+- 2% RH (non-condensing at 32°C +- 2°C(90°F +-3°F). However the useful life of the system's standby batteries and the electronic components may be adversely affected by extreme temperature ranges and humidity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of 15 - 27°C/60-80°F. PRODUCT LINE INFORMATION HWF2V-COM: LTE Digital Cellular Fire Alarm Communicator and Internet Panel, Verizon LTE / IP HWF2A-COM: LTE Digital Cellular Fire Alarm Communicator and Internet Panel, AT&T LTE / IP Both models include: Red cabinet with key and lock Wall outlet box Dialer capture module LTE communications module Antenna and mounting adapter PowerBoost1 power supply LED display board Transformer Manual and required screws Cables, etc. ANTENNA AND EXTERNAL HARDWARE CELL-ANT3DB: 3dBA gain antenna WA7626-CA: SMA to N adapter cable 7626-50HC: 50 ft. antenna cable, low loss Note for external installations: the WA7626-CA adapter cable and 7626-50HC antenna cable are only required when installing the CELL-ANT3DB antenna remotely. OTHER ACCESSORIES 7720P: HWF2V-COM, HWF2A-COM and IPGSM-4G handheld programmer HPTCOVER: Plug-in transformer box for HWF2V-COM, HWF2A-COM, and IPGSM-4G communicators BAT-1270 : Battery 12 Volts, 7AH, sealed AGENCY LISTINGS AND APPROVALS The listings and approvals below apply to the HWF2-COM Series communicators. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult the factory for latest listings. UL Listed: S789 CSFM: 7300-1645:0511 FDNY: Approved NFPA®Made In U.S.A. Space Age Electronics, Inc. www.1sae.com 800.486.1723 Toll Free 508.485.0966 Local 508.485.4740 Fax • 2 Key ring hooks to hold system keys • Business card holder for key contacts • Overall Dimensions are 12” x 13” tall and 2 ¼ deep • 16 gauge steel box and cover for security • Durable powercoat baked on other colors available • Standard ¾”cat 30 key lock other lock as- semblies available • Solid stainless steel piano hinge • Permanently screened white ink 1” high “Fire Alarm Documents” • Legend sheet for passwords and system information FDB Standard Features: Space Age Electronics, Inc. 2013 ED0447 LT10505 Rev.B 1/2 FIRE DOCUMENT BOX The FDB is the perfect fit to meet the demanding code requirements today. SAE's number one goal is to manufacture code compliant solutions and this product allows you to do just that. NFPA 72 2010 section 6.2.2.1 states, "A record of installed software and firmware version numbers shall be maintained at the location of the fire alarm control unit." This durable 16 gauge steel enclosure with a solid piano hinge and key lock will keep all of your code required documents in one safe place. Along with your fire alarm software you can store your test & inspection documents, service records, manuals & AS built drawings for the system. The FDB is designed to hold critical manuals and documents with a durable steel retainer. It has designated hooks to organize key rings and hold important business cards for easy access and reference. Inside the cover it has a organized note table that allows for documentation for passwords and other critical system information. Space Age Electronics, Inc. 2008 Space Age Electronics, Inc. www.1sae.com 800.486.1723 Toll Free 508.485.0966 Local 508.485.4740 Fax Ordering Information: Part # Description SSU00672 Fire Document Box RED SSU00673 Custom screening with your Logo solutions (IAMEFAD) This document is subject to change without notice, see doc # ED0479 for legal disclaimer The fire alarm documents box (FDB) shall be constructed of 18 gauge cold rolled steel. It shall have a red powder coat epoxy finish. The cover shall be permanently screened with 1" high lettering "FIRE ALARM DOCUMENTS " with white indelible ink. The access door shall be locked with a 3/4" barrel lock and the hinge shall be a solid width 12" stainless steel piano hinge. The enclosure will supply 4 mounting holes. Inside the enclosure will accommodate standard 8 1/2 x 11 manuals and loose document records that will be protected within the enclosure. A legend sheet will be permanently attached to the door for system required documentation, key contacts and system information. The enclosure shall also provide 2 key ring holders with a location to mount standard business type cards for key contact personnel. Legend sheet for storing system information including contacts, sign-o , maintenance & test information, and alternate locations of additional records. Business Card Holder Key Ring Hooks Space Age Electronics, Inc. 58 Chocksett Road Sterling, MA 01564 800-486-1723 www.1sae.com For replacement forms order P/N: EA0316 (Qty. 10) LT10644 Rev. 1 Minimum Required Documentation (SIG-FUN) (Reference NFPA-72 2013 Section 7.2.1) 1 Written narrative providing intent and system description □ N/A □ Enclosed Or Alt. Location _____________________________________________ 2 Riser diagram □ N/A □ Enclosed Or Alt. Location _____________________________________________ 3 Floor plan layout showing location of all devices and control equipment □ N/A □ Enclosed Or Alt. Location _____________________________________________ 4 Sequence of operation in either an input/ output matrix or narrative form □ N/A □ Enclosed Or Alt. Location _____________________________________________ 5 Equipment technical data sheets □ N/A □ Enclosed Or Alt. Location _____________________________________________ 6 Manufacturers published instructions, including operation and maintenance instruction □ N/A □ Enclosed Or Alt. Location _____________________________________________ 7 Battery calculations (where batteries are provided) □ N/A □ Enclosed Or Alt. Location _____________________________________________ 8 Voltage drop calculations for notification appliance circuits □ N/A □ Enclosed Or Alt. Location _____________________________________________ 9 Completed record of inspection and testing in accordance with 7.6.6 and 7.8.2 □ N/A □ Enclosed Or Alt. Location _____________________________________________ 10 Completed record of completion in accordance with 7.5.6 and 7.8.2 □ N/A □ Enclosed Or Alt. Location _____________________________________________ 11 Copy of site specific software, where applicable □ N/A □ Enclosed Or Alt. Location _____________________________________________ 12 Record (as-built) drawings □ N/A □ Enclosed Or Alt. Location _____________________________________________ 13 Periodic inspection, testing, and maintenance documentation in accordance with Section 7.6 □ N/A □ Enclosed Or Alt. Location _____________________________________________ 14 Records, record retention, and record maintenance in accordance with 7.7 □ N/A □ Enclosed Or Alt. Location _____________________________________________ Signed:_______________________ Date: ____ / ____ / ____ Property Information Name of property: ________________________ Address: ________________________________ Description of property:_____________________ Occupancy type:__________________________ Certifications and Approvals 16.1 System Installation Contractor: This system, as specified herein, has been installed and tested according to all NFPA standards cited herein. Signed:_______________________ Printed name:__________________ Date: ____ / ____ / ____ Organization:__________________ Title:_________________________ Phone: _______________________ 16.5 Authority Having Jurisdiction: I have witnessed a satisfactory acceptance test of this system and find it to be installed and operating properly in accordance with its approved plans and specifications, with its approved sequence of operations, and with all NFPA standards cited herein. Signed:_______________________ Printed name:__________________ Date: ____ / ____ / ____ Organization:__________________ Title:_________________________ Phone: _______________________ Equipment Information ID No 1: ________________________ Serial: __________________________ Access code:_____________________ ID No 2: ________________________ Serial: __________________________ Access code:_____________________ ED0447 LT10505 Rev.B 2/2 DF-52121:E • 07/30/2015 — Page 1 of 4 MMF-300(A) Series, MDF-300 Addressable Monitor Modules Addressable Devices DF-52121:E • E-325 General Four different monitor modules are available for Fire•Lite’s intelligent control panels to suit a variety of applications. Moni- tor modules are used to supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors (MMF-302(A)). MMF-300(A) is a standard-sized module (typically mounts to a 4" [10.16 cm] square box) that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices. MMF-301(A) is a miniature monitor module a mere 1.3" (3.302 cm) H x 2.75" (6.985 cm) W x 0.65" (1.651 cm) D that super- vises a Style B (Class B) circuit of dry-contact input devices. Its compact design allows the MMF-301(A) to be mounted in a single-gang box behind the device it monitors. MMF-302(A) is a standard-sized module used to monitor and supervise compatible two-wire, 24 volt, smoke detectors on a Style D (Class A) or Style B (Class B) circuit. MDF-300(A) is a standard-sized dual monitor module used to monitor and supervise two independent two-wire Style B (Class B) dry-contact initiating device circuits (IDCs) at two separate, consecutive addresses in intelligent, two-wire sys- tems. LiteSpeed™ is a communication protocol developed by Fire•Lite Engineering that greatly increases the speed of com- munication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of other communication protocols. MMF-300(A) Monitor Module • Built-in type identification automatically identifies this device as a monitor module to the control panel. • Powered directly by two-wire SLC loop. No additional power required. • High noise (EMF/RFI) immunity. • SEMS screws with clamping plates for ease of wiring. • Direct-dial entry of address: 01 – 159 on MS-9600 series panels, 01 – 99 on other compatible systems. • LED flashes during normal operation and latches on steady to indicate alarm. The MMF-300(A) Monitor Module is intended for use in intelli- gent, two-wire systems, where the individual address of each module is selected using the built-in rotary switches. It pro- vides either a two-wire or four-wire fault-tolerant Initiating Device Circuit (IDC) for normally-open-contact fire alarm and supervisory devices. The module has a panel-controlled LED indicator. The MMF-300(A) can be used to replace M300(A) modules in existing systems. MMF-300(A) APPLICATIONS Use to monitor a zone of four-wire smoke detectors, manual fire alarm pull stations, waterflow devices, or other normally- open dry-contact alarm activation devices. May also be used to monitor normally-open supervisory devices with special supervisory indication at the control panel. Monitored circuit may be wired as an NFPA Style B (Class B) or Style D (Class A) Initiating Device Circuit. A 47K Ohm End-of-Line Resistor (provided) terminates the Style B circuit. No resistor is required for supervision of the Style D circuit. MMF-300(A) OPERATION Each MMF-300(A) uses one of the available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/nor- mal/short) of its Initiating Device Circuit (IDC). A flashing LED indicates that the module is in communication with the control panel. The LED latches steady on alarm (subject to current limitations on the loop). MMF-300(A) SPECIFICATIONS Nominal operating voltage: 15 to 32 VDC. Maximum current draw: 5.0 mA (LED on). Average operating current: 375 µA (LED flashing), 1 com- munication every 5 seconds, 47k EOL. Maximum IDC wiring resistance: 1500 Ohms. Maximum IDC Voltage: 11 Volts. EOL resistance: 47K Ohms. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% noncondensing. Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep box. MMF-301(A) Mini Monitor Module • Built-in type identification automatically identifies this device as a monitor module to the panel. • Powered directly by two-wire SLC loop. No additional power required. • High noise (EMF/RFI) immunity. MMF-300(A) (Type H)6999cov.jpg Page 2 of 4 — DF-52121:E • 07/30/2015 • Tinned, stripped leads for ease of wiring. • Direct-dial entry of address: 01 – 159 on MS-9600 series panels, 01 – 99 on other compatible systems The MMF-301(A) Mini Monitor Module can be installed in a single-gang junction directly behind the monitored unit. Its small size and light weight allow it to be installed without rigid mounting. The MMF-301(A) is intended for use in intelligent, two-wire systems where the individual address of each module is selected using rotary switches. It provides a two-wire initiat- ing device circuit for normally-open-contact fire alarm devices. The MMF-301(A) can be used to replace M301(A) modules in existing systems. MMF-301(A) APPLICATIONS Use to monitor a single device or a zone of four-wire smoke detectors, manual fire alarm pull stations, waterflow devices, or other normally-open dry-contact devices. May also be used to monitor normally-open supervisory devices with special supervisory indication at the control panel. Monitored circuit/ device is wired as an NFPA Style B (Class B) Initiating Device Circuit. A 47K Ohm End-of-Line Resistor (provided) terminates the circuit. MMF-301(A) OPERATION Each MMF-301(A) uses one of the available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/nor- mal/short) of its Initiating Device Circuit (IDC). MMF-301(A) SPECIFICATIONS Nominal operating voltage: 15 to 32 VDC. Average operating current: 350 µA, 1 communication every 5 seconds, 47k EOL; 600 µA Max. (Communicating, IDC Shorted). Maximum IDC wiring resistance: 1500 Ohms. Maximum IDC Voltage: 11 Volts. Maximum IDC Current: 450 µA. EOL resistance: 47K Ohms. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% noncondensing. Dimensions: 1.3" (3.302 cm) high x 2.75" (6.985 cm) wide x 0.65" (1.651 cm) deep. Wire length: 6" (15.24 cm) minimum. MMF-302(A) Interface Module • Supports compatible two-wire smoke detectors. • Supervises IDC wiring and connection of external power source. • High noise (EMF/RFI) immunity. • SEMS screws with clamping plates for ease of wiring. • Direct-dial entry entry of address: 01 – 159 on MS-9600 series panels, 01 – 99 on other compatible systems. • LED flashes during normal operation. • LED latches steady to indicate alarm on command from control panel. The MMF-302(A) Interface Module is intended for use in intelli- gent, addressable systems, where the individual address of each module is selected using built-in rotary switches. This module allows intelligent panels to interface and monitor two- wire conventional smoke detectors. It transmits the status (normal, open, or alarm) of one full zone of conventional detectors back to the control panel. All two-wire detectors being monitored must be UL compatible with the module. The MMF-302(A) can be used to replace M302(A) modules in existing systems. MMF-302 (A) APPLICATIONS Use the MMF-302(A) to monitor a zone of two-wire smoke detectors. The monitored circuit may be wired as an NFPA Style B (Class B) or Style D (Class A) Initiating Device Circuit. A 3.9 K Ohm End-of-Line Resistor (provided) terminates the end of the Style B or D (class B or A) circuit (maximum IDC loop resistance is 25 Ohms). Install ELR across terminals 8 and 9 for Style D application. MMF-302(A) OPERATION Each MMF-302(A) uses one of the available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/nor- mal/short) of its Initiating Device Circuit (IDC). A flashing LED indicates that the module is in communication with the control panel. The LED latches steady on alarm (subject to current limitations on the loop). MMF-302(A) SPECIFICATIONS Nominal operating voltage: 15 to 32 VDC. Maximum current draw: 5.1 mA (LED on). Maximum IDC wiring resistance: 25 Ohms. Average operating current: 270 µA, 1 communication and 1 LED flash every 5 seconds, 3.9k eol. EOL resistance: 3.9K Ohms. External supply voltage (between Terminals T10 and T11): • DC voltage: 24 volts power limited. • Ripple voltage: 0.1 Vrms maximum. • Current: 90 mA per module maximum. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% noncondensing. Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep box. MDF-300(A) Dual Monitor Module The MDF-300(A) Dual Monitor Module is intended for use in intelligent, two-wire systems. It provides two independent two- wire initiating device circuits (IDCs) at two separate, consecutive addresses. It is capable of monitoring normally open contact fire alarm and supervisory devices. The module has a single panel- controlled LED.6720m101.wmf DF-52121:E • 07/30/2015 — Page 3 of 4 NOTE: The MDF-300(A) provides two Style B (Class B) IDC cir- cuits ONLY. Style D (Class A) IDC circuits are NOT supported in any application. MDF-300(A) SPECIFICATIONS Normal operating voltage range: 15 to 32 VDC. Maximum current draw: 6.4 mA (LED on). Average operating current: 750 µA (LED flashing). Maximum IDC wiring resistance: 1,500 Ohms. Maximum IDC Voltage: 11 Volts. Maximum IDC Current: 240 µA EOL resistance: 47K Ohms. Temperature range: 32° to 120°F (0° to 49°C). Humidity range: 10% to 93% (non-condensing). Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep box. MDF-300(A) AUTOMATIC ADDRESSING The MDF-300(A) automatically assigns itself to two address- able points, starting with the original address. For example, if the MDF-300(A) is set to address “26”, then it will automati- cally assign itself to addresses “26” and “27”. NOTE: “Ones” addresses on the MDF-300(A) are 0, 2, 4, 6, or 8 only. Terminals 6 and 7 use the first address, and terminals 8 and 9 use the second address. Installation MMF-300(A), MMF-302(A), and MDF-300(A) modules mount directly to a standard 4" (10.16 cm) square, 2.125" (5.398 cm) deep, electrical box. They may also be mounted to the SMB500 surface-mount box. Mounting hardware and installa- tion instructions are provided with each module. All wiring must conform to applicable local codes, ordinances, and regu- lations. These modules are intended for power-limited wiring only. The MMF-301(A) module is intended to be wired and mounted without rigid connections inside a standard electrical box. All wiring must conform to applicable local codes, ordinances, and regulations. Agency Listings and Approvals In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult fac- tory for latest listing status. •UL: S2424. •ULC: S2424. •FM Approved. •CSFM: 7300-0075:0185. •MEA: 72-01-E. Product Line Information NOTE: “A” suffix indicates ULC-listed model. MMF-300(A): Monitor module. MMF-301(A): Monitor module, miniature. MMF-302(A): Monitor module, two-wire detectors. MDF-300(A): Monitor module, dual, two independent Class B circuits. SMB500: Optional surface-mount backbox. NOTE: See installation instructions and refer to the SLC Wiring Manual, PN 51309. Architects’/Engineers’ Specifications Specifications of these devices and all FireLite products are available from FireLite. CAUTION: Avoid duplicating addresses on the system. Page 4 of 4 — DF-52121:E • 07/30/2015 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com Fire·Lite® is a registered trademark and LiteSpeed™ and FireWatch™ are trademarks of Honeywell International Inc. ©2015 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. DF-52130 — Page 1 of 2 CMF-300 and CRF-300 Module The CMF-300 Addressable Control Module provides Fire•Lite Alarm's MS-9200 and MS-9600 intelligent control panels a supervised Class B (Style Y) or Class A (Style Z) circuit for Notification Appliances (horns, strobes, etc.). Addressability allows the CMF to be activated, either manu- ally or through panel programming, on a select (zone or area of coverage) basis. The CRF-300 Addressable Relay Module provides the MS-9200 and MS-9600 systems with two isolated sets of Form-C dry-contact outputs for activating a variety of auxil- iary devices, such as fans, dampers, door holders, con- trol equipment, etc. Addressability allows the dry contact to be activated, either manually or through panel program- ming, on a select basis. • Built-in type identification automatically identifies these devices to the control panel. • Internal circuitry and relay powered directly by two-wire SLC loop. The CMF module requires power (for horns, strobes, etc.). • Integral LED “blinks” green each time a communication is received from the control panel and turns on in steady red when activated. • High noise immunity (EMF/RFI). • The CMF may be used to switch 24-volt NAC power. • Wide viewing angle of LED. • SEMS screws with clamping plates for wiring ease. •Direct Decade 01-99 (MS-9200) and 01-159 (MS-9600) entry of address. The CMF is used to switch 24 VDC audible/visual power. The CRF may be programmed to operate dry contacts for door holders, Air Handling Unit shutdown, etc. • The face plate is made of off-white Noryl®. • Controls include two rotary switches for direct-dial entry of address (01-99 on the MS-9200 and 01-159 on the MS-9600). • The CMF is configured for a single Class B (Style Y) or Class A (Style Z) Notification Appliance Circuit. • The CRF provides two Form-C dry contacts that switch together. Noryl® is a registered trademark of GE Plastics, a subsidiary of General Electric Company.CMF300.jpgEach CMF or CRF uses one of 99 (MS-9200) or 159 (MS- 9600) possible module addresses on a SLC loop. It re- sponds to regular polls from the control panel and reports its type and status, including the open/normal/short sta- tus of its Notification Appliance Circuit (NAC). The LED blinks with each poll received. On command, it activates its internal relay. The CMF supervises Class B (Style Y) or Class A (Style Z) notification or control circuits. Upon code command from the panel, the CMF will discon- nect the supervision and connect the external power sup- ply in the proper polarity across the load device. The dis- connection of the supervision provides a positive indica- tion to the panel that the control relay actually turned ON. The external power supply is always relay isolated from the communication loop so that a trouble condition on the external power supply will never interfere with the rest of the system. Rotary switches set a unique address for each module. The address may be set before or after mounting. The built-in TYPE CODE (not settable) will identify the module to the control panel, so as to differentiate between a mod- ule and a sensor address. DF-52130 E-350September 28, 2001 Section: Addressable Deviceswww.firelite.com This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms, One Fire-Lite Place, Northford, Connecticut 06472. Phone: (800) 627-3473, Toll Free FAX: (877) 699- 4105, FAX Back:(888) 388-3299.Made in the U.S.A. 7300-0075:185 Page 2 of 2 — DF-52130 Normal operating voltage: 15 to 32 VDC. Maximum current draw: 5.1 mA (LED on). Average operating current: 390 µA (LED flashing). External supply voltage (between Terminals T3 and T4): maximum 80 volts (RMS or DC). Drain on external supply: 2 mA maximum (using internal EOL relay). EOL resistance: 47K ohms. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% non-condensing. Dimensions: 4.5" (114.3 mm) high x 4" (101.6 mm) wide x 1.25" (31.75 mm) deep. Mounts to a 4" (101.6 mm) square x 2.125" (53.975 mm) deep box. Normal operating voltage: 15 to 32 VDC. Maximum current draw: 5.1 mA (LED on). Average operating current: 270 µA (LED flashing). EOL resistance: not used. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% non-condensing. Dimensions: 4.5" (114.3 mm) high x 4" (101.6 mm) wide x 1.25" (31.75 mm) deep. Mounts to a 4" (101.6 mm) square x 2.125" (53.975 mm) deep box. CMF-300 Intelligent Addressable Control Module. CRF-300 Intelligent Addressable Relay Module. SMB500 Optional Surface-Mount Backbox. CB500 Control Module Barrier — required by UL for separating power-limited and non-power lim- ited wiring in the same junction box as CMF-300.6724mt1.wmf6724mt2.wmfNote CB500 Module Barrier, which creates isolated quadrant. 6724rate.tbl 4" (101.6 mm) square x 2.125" (53.975 mm) deep box Load Description Application Maximum Voltage Current Rating Resistive Non-Coded 30 VDC 3.0 A Resistive Coded 30 VDC 2.0 A Resistive Non-Coded 110 VDC 0.9 A Resistive Non-Coded 125 VAC 0.9 A Inductive (L/R = 5 ms) Coded 30 VDC 0.5 A Inductive (L/R = 2 ms) Coded 30 VDC 1.0 A Inductive (PF = 0.35) Non-Coded 125 VAC 0.5 A DF-61010:A • 4/2/18 — Page 1 of 3 SD365(A) Series Addressable Photoelectric Detectors Addressable Devices DF-61010:A SD365 General The Fire-Lite SD365(A), SD365T(A), and SD365R(A) Series addressable plug-in photoelectric smoke detectors are designed for both performance and aesthetics. A new modern, sleek, contempo- rary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. Exclusively for use with Fire-Lite’s addressable fire alarm control panels, the SD365(A) Series point ID capability allows each detec- tor’s address to be set with rotary, decimal address switches, provid- ing exact detector location for emergency personnel to quickly locate a fire during its early stages, potentially saving precious rescue time while also reducing property damage. Two LEDs on each sensor light to provide a local, visible sensor indication. The SD365(A) Series also offers 135°F (57°C) fixed temperature thermal sensing on the SD365T(A) and a remote test capable detec- tor on the SD365R(A) for use with DNR(A)/DNRW duct smoke detector housings. Features SLC LOOP • Two-wire loop connection. • Unit uses base for wiring. ADDRESSING • Addressable by device. • Rotary, decimal addressing: Please refer to the Fire-Lite panel manuals for device capacity. ARCHITECTURE • New modern profile for improved aesthetics. • Unique single-source design to respond quickly and dependably to a broad range of fires. • Integral communications and built-in type identification. • Built-in tamper-resistant feature. • Removable cover and insect-resistant screen for simple field cleaning. OPERATION • Designed to meet UL 268 7th Edition. • Factory preset at 1.5% nominal sensitivity for panel alarm thresh- old level. • Visible LED “blinks” when the unit is addressed (communicating with the fire panel) and latches on in alarm. • Low standby current. MECHANICALS • Sealed against back pressure. • Mounts to: single-gang box, 3.5" (8.89 cm) or 4.0" (10.16 cm) octagonal box, or 4.0" (10.16 cm) square electrical box (with or without a mud ring - not included). OPTIONS • Remote LED output connection, RA100Z. Installation SD365(A) series plug-in detectors use a detachable mounting base to simplify installation, service and maintenance. Mount base (all base types) on an electrical backbox which is at least 1.5" (3.81 cm) deep. For a chart of compatible junction boxes, see DF-60059. NOTE: Because of the inherent supervision provided by the SLC loop, end-of-line resistors are not required. Wiring “T-taps” or branches are permitted for Style 4 (Class B) wiring. SD365R(A) mounts in a D355PL(A) or DNR(A) /DNRW duct detector housing. Operation Each SD365(A) Series detector uses one possible addresses on the Fire-lite Signaling Line Circuit (SLC). It responds to regular polls from the system and reports its type and status. Detector Sensitivity Test Each detector can have its sensitivity tested (required per NFPA 72, Chapter 14 on Inspection, Testing and Maintenance) when installed/ connected to an ES-50X or ES-200X addressable fire alarm control panel. The results of the sensitivity test can be printed off the for record keeping. Specification Voltage range: 15 – 32 VDC (peak). Standby current: 200 μA @ 24 VDC. Max current: 4.5 mA @ 24 VDC (latched “ON”). Air velocity: 4,000 ft./min. (20 m/sec.) maximum. Sensitivity: UL Applications: 0.5% to 4.0% per foot obscuration Size: 2.0" (5.3 cm) high; base determines diameter. –B300-6: 6.1" (15.6 cm) diameter. –B501: 4" (10.2 cm) diameter. For a complete list of detector bases see DN-60981. Shipping weight: 3.4 oz. (95 g). DF-61010:A • 4/4/18 — Page 2 of 3 Operating temperature range: • SD365(A): 0°C to 50°C (32°F to 122°F); • SD365T(A): 0°C to 38°C (32°F to 100°F). • SD365R(A): installed in a DNR(A)/DNRW -20°C to 70°C (-4°F to 158°F). Relative humidity: 10%-93%, non-condensing. Listings Listings and approvals below apply to the SD365 Series detectors. In some cases, certain detectors may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. • UL/ULC Listed: S1059 • CSFM: 7272-0075-0502 • FM Approved Product Line Information NOTE: Detectors must be mounted to one of the Intelligent Bases listed below. NOTE: “IV” suffix indicates LiteSpeed® and CLIP device. NOTE: “A” suffix indicates Canadian version. SD365(A): White, Addressable photoelectric detector; B300-6 base included. LiteSpeed only. SD365(A)-IV: Ivory, Addressable photoelectric detector; B300-6 base included. SD365T(A): White, Same as SD365 but with thermal element; B300-6 base included. LiteSpeed only. SD365T(A)-IV: Ivory, Same as SD365 but with thermal element; B300-6 base included. SD365R(A): White, Remote test capable addressable photoelectric detector for use with DNR(A)/DNRW. LiteSpeed only. SD365R(A)-IV: Ivory, Remote test capable addressable photoelec- tric detector; for use with DNR(A)/DNRW. INTELLIGENT BASES NOTE: For details on intelligent bases, see DN-60981. B300-6: White, 6” base, standard flanged low-profile mounting base. (CSFM: 7300-1653:0109 Pending) B300-6-IV: Ivory,6” base, standard flanged low-profile mounting base. (CSFM: 7300-1653:0109 Pending) B300A-6: Same as B300-6, ULC listed. B300A-6-IV: Ivory, 6” standard flanged low-profile mounting base, ULC listed. B300-6-BP: Bulk pack of B300-6, package contains 10 B501-WHITE: White, 4” standard European flangeless mounting base. UL/ULC listed. (CSFM: 7300-1653:0109 Pending) B501-BL: Black, 4” standard European flangeless mounting base. UL/ULC listed. (CSFM: 7300-1653:0109 Pending) B501-IV: Ivory color, 4” standard European flangeless mounting base. UL/ULC listed. (CSFM: 7300-1653:0109 Pending) B501-WHITE-BP: Bulk pack of B501-WHITE contains 10. B224RB-WH: White, relay base. (CSFM: 7300-1653:0216 Pending) B224RB-IV: Ivory, relay base. (CSFM: 7300-1653:0216 Pending) B224RBA-WH: White, relay base, ULC listing. B224RBA-IV: Ivory, relay base, ULC listing. B224BI-WH: White, isolator detector base. (CSFM: 7300- 1653:0216 Pending) B224BI-IV: Ivory isolator detector base. (CSFM: 7300-1653:0216 Pending) B224BIA-WH: White, isolator detector base, ULC listing. B224BIA-IV: Ivory isolator detector base, ULC listing. B200S-WH: White, Intelligent addressable sounder base capable of producing sound output in high or low volume with ANSI Temporal 3, ANSI Temporal 4, continuous tone, marching tone, and custom tone. Uses FlashScan protocol. (CSFM: 7300-1653:0213 Pending) B200S-IV: Ivory, Intelligent addressable sounder base capable of producing sound output in high or low volume with ANSI Temporal 3, ANSI Temporal 4, continuous tone, marching tone, and custom tone. Uses FlashScan protocol. (CSFM: 7300-1653:0213 Pending) B200SA-WH: Same as B200S-WH, ULC listing. B200SA-IV: Same as B200S-IV, ULC listing. B200SCOA-WH: White, Intelligent, programmable sounder base in English/French (required in Canada for ULC applications with CO Series detector applications. B200SCOA-IV: Ivory Intelligent, programmable sounder base in English/French (required in Canada for ULC applications with CO Series detector applications, ULC listing. B200S-LF-WH: White, Low Frequency Intelligent, programmable sounder base. Produces a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent; designed to meet the NFPA 72 sleeping space requirement. (CSFM: 7300-1653:0238 Pending) B200S-LF-IV: Ivory, Low Frequency Intelligent, programmable sounder base. Produces a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent; designed to meet the NFPA 72 sleeping space requirement. (CSFM: 7300-1653:0238 Pending) B200SR-WH: White, Intelligent sounder base capable of producing sound output with ANSI Temporal 3 or continuous tone. Intended for retrofit applications. (CSFM: 7300-1653:0213 Pending) B200SR-IV: Ivory, Intelligent sounder base capable of producing sound output with ANSI Temporal 3 or continuous tone. Intended for retrofit applications. (CSFM: 7300-1653:0213 Pending) B200SRA-WH: Same as B200SR-WH with, ULC listing. B200SRA-IV: Same as B200SR-IV in Ivory color, ULC listing. B200SR-LF-WH: White, Low Frequency Intelligent, programmable sounder base. Produces a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent; designed to meet the NFPA 72 sleeping space requirement. Intended for retrofit applica- tions. (CSFM: 7300-1653:0238 Pending) B200SR-LF-IV: Ivory, Low Frequency Intelligent, programmable sounder base. Produces a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent; designed to meet the NFPA 72 sleeping space requirement. Intended for retrofit applica- tions. (CSFM: 7300-1653:0238 Pending) MOUNTING KITS AND ACCESSORIES TR300: White, replacement flange for B210LP(A) base. TR300-IV: Ivory, replacement flange for B210LP(A) base. RA100Z(A): Remote LED annunciator. 3 – 32 VDC. Mounts to a U.S. single-gang electrical box. For use with B501(A) and B300- 6(A). M02-04-00: Test magnet. M02-09-00: Test magnet with telescoping handle. CK300: Color Kit (includes cover and trim ring), white, 10-pack. CK300-IV: Color Kit (includes cover and trim ring), ivory, 10-pack. CK300-BL: Color Kit (includes cover and trim ring), black, 10-pack. FireLite® Alarms is a registered trademark of Honeywell International Inc. ©2018 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Page 3 of 3 — DF-61010:A • 4/4/18 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com Fire Alarm Systems | FMM‑100DAT2CK‑B Dual‑action, Die‑cast Metal Manual Station (blue) FMM‑100DAT2CK‑B Dual‑action, Die‑cast Metal Manual Station (blue) www.boschsecurity.com u Terminal connections u Gold‑plated alarm contacts for corrosion resistance u Surface back box The FMM‑100DAT2CK‑B is a high‑quality, metal manual station in blue. This dual‑action manual station comes with a key lock and contains gold‑plated contacts to resist corrosion. Functions Operation With the dual‑action configuration the upper bar on the front of the manual station rotates inward allowing the activation bar to be grasped and operated by a single hand. When the lower bar on the front of the manual station (the activation bar) is pulled, it latches open and is easily visible from 50 ft (15 m). Reset the activation bar by opening the manual station with the key and placing the activation bar in its normal upright position. An optional scored acrylic break rod is available. Certifications and approvals Region Certification USA UL UNIU: Boxes, Non-Coded (UL38),UNIU7: Boxes, Non-Coded Certified forCanada (cULus) Installation/configuration notes Compatibility Information The manual station is compatible with all Bosch Security Systems, Inc. Fire Alarm Control Panels. Mounting Considerations The manual station can be surface mounted on the FMM‑100BB‑B Surface-mount Back Box (blue) or flush mounted on a standard single‑gang back box. To comply with ADA standards, the manual station must be less than 48 in. (1.2 m) above the floor for front wheelchair access and less than 54 in. (1.3 m) above the floor for side wheelchair access. Parts included The following parts are provided with each manual station in the FMM‑100 series: Quant.Component 1 Manual station 1 D102 Key (1358 key) 1 FMM‑100GR Acrylic Break Rod 1 Hardware pack 1 Literature pack Technical specifications Environmental Relative Humidity:90% at +100°F (+38°C) Temperature (operating): -40°F to +150°F (-40°C to +66°C) Mechanical Color:Blue Dimensions (H x W x D):4.75 in. x 3.25 in. x 1.1 in. (12 cm x 8.3 cm x 2.8 cm) Material:die‑cast metal Inputs Switch Rating:1 A at 30 VDC or 125 VAC Ordering information FMM‑100DAT2CK‑B Dual‑action, Die‑cast Metal Manual Station (blue) High‑quality, metal manual emergency station in blue Order number FMM-100DAT2CK-B Accessories D102 Replacement Key Replacement key (#1358) for LOCK‑1358 and the D101 lock. Order number D102 FMM‑100BB‑B Surface‑mount Back Box (blue) Blue cast‑metal back box Order number FMM-100BB-B FMM‑100GR Scored Acrylic Break Rods Scored acrylic rods (12 per package) Order number FMM-100GR 2 | FMM‑100DAT2CK‑B Dual‑action, Die‑cast Metal Manual Station (blue) 3 | FMM‑100DAT2CK‑B Dual‑action, Die‑cast Metal Manual Station (blue) Represented by: Americas:Europe, Middle East, Africa:Asia-Pacific:China:America Latina: Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 security.sales@us.bosch.com www.boschsecurity.us Bosch Security Systems B.V. P.O. Box 80002 5617 BA Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 emea.securitysystems@bosch.com www.boschsecurity.com Robert Bosch (SEA) Pte Ltd, Security Systems 11 Bishan Street 21 Singapore 573943 Phone: +65 6571 2808 Fax: +65 6571 2699 apr.securitysystems@bosch.com www.boschsecurity.asia Bosch (Shanghai) Security Systems Ltd. 201 Building, No. 333 Fuquan Road North IBP Changning District, Shanghai 200335 China Phone +86 21 22181111 Fax: +86 21 22182398 www.boschsecurity.com.cn Robert Bosch Ltda Security Systems Division Via Anhanguera, Km 98 CEP 13065-900 Campinas, Sao Paulo, Brazil Phone: +55 19 2103 2860 Fax: +55 19 2103 2862 latam.boschsecurity@bosch.com www.boschsecurity.com © Bosch Security Systems 2014 | Data subject to change without notice 2708873483 | en, V2, 11. Aug 2014 DF-52013:D • 4/13/2012 — Page 1 of 2 BG-12LX Addressable Manual Pull Station Addressable Devices DF-52013:D • E-100 FLPullStation.jpgGeneral The Fire·Lite BG-12LX is a state-of-the-art, dual-action (i.e., requires two motions to activate the station) pull station that includes an addressable interface (mounted inside) for Fire·Lite’s addressable fire alarm control panels (FACPs) Because the BG-12LX is addressable, the control panel can display the exact location of the activated manual station. This leads fire personnel quickly to the location of the alarm. Features • Maintenance personnel can open station for inspection and address setting without causing an alarm condition. • Built-in bicolor LED, which is visible through the handle of the station, flashes in normal operation and latches steady red when in alarm. • Handle latches in down position and the word “ACTIVATED” appears to clearly indicate the station has been operated. • Captive screw terminals wire-ready for easy connection to SLC loop (accepts up to 12 AWG/3.25 mm² wire). • Can be surface mounted (with SB-10 or SB-I/O) or semi- flush mounted. Semi-flush mount to a standard single- gang, double-gang, or 4" (10.16 cm) square electrical box. • Smooth dual-action design. • Meets ADAAG controls and operating mechanisms guide- lines (Section 4.1.3[13]); meets ADA requirement for 5 lb. maximum activation force. • Highly visible. • Attractive shape and textured finish. • Key reset. • Includes Braille text on station handle. • Optional trim ring (BG12TR). • Meets UL 38, Standard for Manually Actuated Signaling Boxes. Construction Shell, door, and handle are molded of durable polycarbonate material with a textured finish. Specifications •Shipping Weight: 9.6 oz. (272.15 g) •Normal operating voltage: 24 VDC. •Maximum SLC loop voltage: 28.0 VDC. •Maximum SLC standby current: 375 μA. •Maximum SLC alarm current: 5 mA. •Temperature Range: 32°F to 120°F (0°C to 49°C) •Relative Humidity: 10% to 93% (noncondensing) •For use indoors in a dry location Installation The BG-12LX will mount semi-flush into a single-gang, double- gang, or standard 4" (10.16 cm) square electrical outlet box, or will surface mount to the model SB-10 or SB-I/O surface back- box. If the BG-12LX is being semi-flush mounted, then the optional trim ring (BG12TR) may be used. The BG12TR is usually needed for semi-flush mounting with 4" (10.16 cm) or double-gang boxes (not with single-gang boxes). Operation Pushing in, then pulling down on the handle causes it to latch in the down/activated position. Once latched, the word “ACTI- VATED” (in bright yellow) appears at the top of the handle, while a portion of the handle protrudes from the bottom of the station. To reset the station, simply unlock the station with the key and pull the door open. This action resets the handle; clos- ing the door automatically resets the switch. Each manual station, on command from the control panel, sends data to the panel representing the state of the manual switch. Two rotary decimal switches allow address settings (1 – 159 with Breakaway Tab removed for MS-9600 Series, 1 – 99 and MS-9200UDLS, 1 – 50 for MS-9050UD). Architectural/Engineering Specifications Manual Fire Alarm Stations shall be non-coded, with a key- operated reset lock in order that they may be tested, and so designed that after actual Emergency Operation, they cannot be restored to normal except by use of a key. An operated sta- tion shall automatically condition itself so as to be visually detected as activated. Manual stations shall be constructed of red-colored polycarbonate material with clearly visible operat- ing instructions provided on the cover. The word FIRE shall appear on the front of the stations in white letters, 1.00 inches (2.54 cm) or larger. Stations shall be suitable for surface mounting on matching backbox SB-10 or SB-I/O; or semi-flush mounting on a standard single-gang, double-gang, or 4" (10.16 cm) square electrical box, and shall be installed Page 2 of 2 — DF-52013:D • 4/13/2012 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com FireLite® Alarms® is a registered trademark of Honeywell International Inc. ©2012 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Made in the U.S. A. within the limits defined by the Americans with Disabilities Act (ADA) or per national/local requirements. Manual Stations shall be Underwriters Laboratories listed. Manual stations shall connect with two wires to one of the con- trol panel SLC loops. The manual station shall, on command from the control panel, send data to the panel representing the state of the manual switch. Manual stations shall provide address setting by use of rotary decimal switches. Product Line Information BG-12LX: Dual-action addressable pull station. Includes key locking feature. (Listed for Canadian and non-Canadian appli- cations.) SB-10: Surface backbox; metal. SB-I/O: Surface backbox; plastic. BG12TR: Optional trim ring. 17003: Keys, set of two. Agency Listings and Approvals In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in pro- cess. Consult factory for latest listing status. •UL/ULC Listed: S711 (listed for Canadian and non-Cana- dian applications). •MEA: 67-02-E. •CSFM: 7150-0075:0184. • FM Approved. Patented: U.S. Patent No. D428,351; 6,380,846; 6,314,772; 6,632,108. DF-52389:B • 01/05/2012 — Page 1 of 2 I300(A) Fault Isolator Module Addressable Devices DF-52389:B • E-940 General The Fire•Lite I300(A) Fault Isolator Module is used with Fire•Lite’s addressable fire alarm control panels (FACPs) to protect the system against wire-to-wire short circuits on the SLC loop. The I300(A) should be placed between each device on the SLC loop to isolate a short-circuit problem between the modules. It is required for true Style 7 operation so that other devices can continue to operate normally in the event of a short-circuit on the SLC. Features • Powered by SLC loop directly, no external power required. • Mounts in standard junction boxes (4.0"/10.16 cm square, 2.125"/5.398 cm deep). • Integral LED blinks to indicate normal condition. Illuminates steady when short circuit condition is detected. • High noise (EMF/RFI) immunity. Applications The Fault Isolator Modules should be spaced between groups of sensors in a loop to protect the rest of the loop. Use to iso- late short circuit problems within a section of a loop so that other sections can continue to operate normally. The I300(A) supports a maximum of 25 devices in-between isolators, except when using relay bases. NOTE: LOADS PER RELAY BASE AND ISOLATORS/ISOLATOR BASES: The maximum number of addressable devices between isolators (or B224BIA isolator bases) is 25 devices. B224RB relay bases draw more current than other intelligent devices. When calculating the 25-device maximum, B224RB rep- resents 2.5 DEVICES; see example on page 2. NOTE: ON MAXIMUM NUMBER OF DEVICES: See the SLC Manual (51309) for information on loss of addresses due to current limitations. Each module or base added reduces the capacity of address positions in an SLC. All SLC field devices must have been purchased after February 1995 to meet the aforementioned requirements. If the SLC field devices were purchased prior to February 1995, each isolator used reduces the capacity of an SLC by two address positions. Requirements differ as applied to relay bases; see note above. Specifications •Operating voltage: 15 – 32 VDC (peak). •Maximum current upon activation due to short circuit: refer to the manual for the main FACP. •Standby current: 450 μA maximum; I300(A) is not isolating – relay closed. •Temperature range: 32°F to 120°F (0°C to 49°C). •Relative humidity: 10% to 93%. •Weight: 5 oz. (150 grams). •Dimensions: 4.5”H x 4.5”W x 0.25” D (11.43 cm H x 11.43 cm W x 0.635 cm D). Construction The face plate is made of off-white plastic. Module includes yellow LED indicator that pulses when normal and illuminates steady when a short is detected. Operation Automatically opens circuit when the line voltage drops below four volts. Fault Isolator Modules should be spaced between groups of addressable devices (maximum 25, see notes on page 1) in a loop to protect the rest of the loop. If a short occurs between any two isolators, then both isolators immedi- ately switch to an open circuit state and isolate the groups of sensors between them. The remaining units on the loop con- tinue to fully operate. In Style 4 loops, the I300(A) is generally used at each T-tap branch, to limit the effect of short circuits on a branch to the devices on that branch. The LED indicator is on continuously during a short circuit condition. The I300(A) Fault Isolator Module automatically restores the shorted portion of the communications loop to normal. Installation • Mount on a standard junction box (4.0"/10.16 cm square) which is at least 2.125"/5.398 cm deep. • Terminal screws are provided for “in and out” wiring. • Installation instructions are provided with each module. • Surface-mount box is available as an option. 2243devices.wmf isolator module or base isolator module or base detector module 25 DEVICES I300(A) Page 2 of 2 — DF-52389:B • 01/05/2012 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com Fire·Lite® are registered trademarks of Honeywell International Inc. ©2012 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Made in the U.S. A. Engineering Specifications Fault Isolator Modules shall be provided to automatically iso- late wire-to-wire short circuits on an SLC loop. The Fault Isola- tor Module shall limit the number of modules or detectors that may be rendered inoperative by a short circuit fault on the SLC Loop. If a wire-to-wire short occurs, the Fault Isolator Module shall automatically open-circuit (disconnect) the SLC loop. When the short circuit condition is corrected, the Fault Isolator Module shall automatically reconnect the isolated section of the SLC loop. The Fault Isolator Module shall not require any address-setting, and its operations shall be totally automatic. It shall not be necessary to replace or reset an Fault Isolator Module after its normal operation. The Fault Isolator Module shall mount in a standard 4" (10.16 cm) deep electrical box, in a surface-mounted backbox, or in the Fire Alarm Control Panel. It shall provide a single LED which shall flash to indi- cate that the Isolator is operational and shall illuminate steadily to indicate that a short circuit condition has been detected and isolated. Agency Approvals and Listings These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in progress. Consult factory for listing details. •UL Listed: S2424 (I300 only). •ULC Listed: S2424 (I300A only). •CSFM: 7300-0075:0159. •MEA: 3-94-E. • FM Approved. Product Line Information NOTE: “A” suffix indicates ULC Listed model. I300I300A: Same as I300 with ULC Listing. SMB500: Optional surface-mount backbox. Examples of Device Counts (see notes under Applications)52389-2011g.wmfisolator module or base isolator module or basedetector with standard base module Starts Next Count detector with relay base Counts as... (less than 25 total) Weatherproof appliances, Version 2 Description Designed for life safety, performance and reliability, the Wheelock weatherpoof notification appliances nclude: Weatherproof Appliances Series Strobes RSSWP Horn strobes ASWP Horn AH-24WP, AH-12WP Multitone horn strobes MTWP Multitone horns MT Speaker strobes ET70WP Speakers ET-1010 All strobe models are UL dual listed—meeting both UL1638 and UL1971 requirements. As dual listed appliances, these weatherproof strobes, horn strobes and speaker strobes are listed for outdoor applications under UL 1638 as well as under UL 1971, the Standard for Safety Signaling Devices for Hearing Impaired. With an extended temperature range of –40°F to 150°F (–40°C to 66°C), Wheelock weatherproof appliances meet or exceed UL outdoor test requirements for rain, humidity and corrosion resistance while providing multiple strobe intensity options, including the highest strobe ratings available for area coverage per NFPA 72 strobe spacing tables (up to 185 candela for wall mounting and 177 candela for ceiling mounting). To enable weatherproof mounting, Eaton provides the industry’s widest choice of mounting options for surface or unique semi-flush installation. Models are available for surface mounting to Wheelock weatherproof backboxes on walls or ceilings. The optional WP-KIT allows the weatherproof backboxes (IOB, WPBB or WPSBB) to be mounted to a recessed electrical box for concealed conduit installation. For semi-flush installation, the WPA* and WFPA* kits allow a customer to mount the weatherproof appliances to a recessed electrical box without the need for an external weatherproof backbox. See Table 10 on page three of this document for a summarization of these mounting options and the required accessories. All models may be synchronized using the Wheelock DSM sync modules, Wheelock power supplies or other manufacturers panels incorporating the Wheelock patented sync proto- col. The horn output of horn strobes can be independently controlled on 2-wire circuits using the Wheelock patented sync protocol. MTWP horn strobe models are 4-wire appliances; the strobes can be synchronized while the audible can be connected to a coded fire alarm system. MT horns may be synchronized, using the temporal Code 3 horn setting. * Technical Data TD450112EN Effective February 2019 Supersedes September 2017 Wheelock AH, AS, MT, RSS, ET70 2 Technical Data TD450112EN February 2019 EATON www.eaton.com Wheelock AH, AS, MT, RSS, ET70 Features & benefits • Weatherproof with extended temperature range of –40°F to 150°F (–40°C to 66°C)* • Dual Listed strobe models (UL 1638 and UL 1971) • Industry’s highest strobe candela options • Strobes and Code 3 horn synchronize using the Wheelock Sync Modules or panels with built-in Wheelock Patented Sync Protocol • Models with field selectable tone, dBA and candela settings • Wall or ceiling mounting options • Surface or semi-flush mounting (indoor and outdoor) • IN/OUT wiring termination accepting two #12-18 AWG wires at each terminal otee:N Please read these specifications and associated installation instructions, before using, specifying, or installing this product. Visit Eaton.com/massnotification for current installation instructions. Approvals & compliances • Approvals include: UL Standards 1971, 1638, 464 and 1480; ULC, California State Fire Marshal (CSFM); and Factory Mutual (FM) (see agency approvals by model number on pages 4 and 5 of this document) • The series RSSWP, ASWP, AH-24WP, MTWP-2475W, and MT-12/24 have UL/ULC approval down to –40°F. The ET-1010 and ET70WP have UL approval down to –40°F. • Compliance with the following requirements: NFPA; UFC; FCC, ANSI 117.1; OSHA Part 29, 1910.165; AD General notes • Strobes are designed to flash at 1 flash per second minimum over their UL Listed Regulated Voltage Range. • All candela ratings represent minimum effective Strobe intensity based on UL Standards 1971 and 1638 as indicated in candela ratings table. • Models are available in red or white. Contact Customer Service for order code and delivery. Drawings + 75cdWP 0.602 + 75cdWP 4.80 4.80 Figure 1. RSSWP front and side views 4.80 4.80 2.55 Figure 2. ASWP front and side views FIRE ALARM DEVICE - DO NOT PAINT WP75cd + 5.126 5.126FIRE ALARM DEVICE - DO NOT PAINT WP75cd + 0.65 Figure 3. MTWP front and side views 5.368 FIRE ALARM DEVICE - DO NOT PAINT 75cdWP 5.120 5.120 Figure 4. ET70WP front and side views 5.13 5.13 2.17 Figure 5. MT front and side views 3 Technical Data TD450112EN February 2019 EATON www.eaton.com Wheelock AH, AS, MT, RSS, ET70 4.29 4.29 4.09 1.92 Figure 6. ET-1010 front and side views Table 1. Maximum RMS current for AH models UL Max Current for AH 24 VDC High (99) dBA 0.080 Med (95) dBA 0.043 Low (90) dBA 0.021 Table 2. dBA ratings for ET-1010 and ET70WP models UL Reverberant dBA @ 10 ft. Watts Model 1/8 1/4 1/2 1 2 4 8 ET-1010 77 80 83 86 87 92 94 ET70WP 77 88 83 86 88 91 93 Table 3. Maximum RMS current and dBA, MT weatherproof models MTWP/MT 24 VDC MT 12 VDC dBA HI STD HI STD Horn 0.108 0.044 0.177 0.034 Bell 0.053 0.024 0.095 0.020 March Time 0.104 0.087 0.142 0.034 Code 3 Horn 0.122 0.035 0.200 0.034 Code 3 Tone 0.135 0.035 0.152 0.021 Slow Whoop 0.098 0.037 0.142 0.035 Siren 0.104 0.036 0.152 0.030 Hi/Lo 0.057 0.025 0.114 0.026 Table 4. Strobe and ASWP ratings Strobe Candela UL 1971 UL 1638 @ 77°F UL 1638 @ –40°F Max RMS Current (strobe only) Maximum RMS Current for ASWP High Med Low 2475W 30 a 180 115 0.138 0.168 0.155 0.150 2475C 15 180 115 0.138 0.168 0.155 0.150 MCWH 135 135 56 0.300 0.355 0.340 0.335 185 185 77 0.420 0.480 0.465 0.460 MCCH 115 115 47 0.300 0.355 0.340 0.335 177 177 73 0.420 0.480 0.465 0.460 24185 185 185 77 0.420 24177 177 177 73 0.420 a Wall mount rating only ULC Anechoic dBA at 10 Feet 24 VDC 12 VDC 92 87 92 87 86 80 86 80 89 84 89 84 88 83 88 83 85 80 85 80 90 85 90 85 89 84 89 84 86 81 86 81 Candela ratings 4 Technical Data TD450112EN February 2019 EATON www.eaton.com Wheelock AH, AS, MT, RSS, ET70 Wall mount models Table 5. Specification and ordering information Agency Approvals Model Number Finish Order Code UL ULC CSFM FM Strobe RSSWP-2475W-FR Red 9013 X X X X RSSWP-2475W-FW White 3034 X X X X RSSWP-24MCWH-FR Red 5161 X X X – RSSWP-24MCWH-FW White 5165 X X X – Audible strobe ASWP-2475W-FR Red 9012 X X X X ASWP-24MCWH-FR Red 5137 X X X – ASWP-24MCWH-FW White 5140 X X X – Multitone strobe MTWP-2475W-FR Red 8420 X X X X MTWP-2475W-FW White 3112 X X X X MTWP-24MCWH-FR Red 5132 X X X – MTWP-24MCWH-FW White 5134 X X X – Speaker strobe ET70WP-2475W-FR Red 9077 X X X ET70WP-2475W-FW White 3179 X X X ET70WP-24185W-FR Red 4885 X X X ET70WP-24185W-FW White 4891 X X X Ceiling mount models Table 6. Specification and ordering information Agency Approvals Model Number Finish Order Code UL ULC CSFM FM Strobe RSSWP-2475C-FR Red 4338 X X X X RSSWP-2575C-FW White 4446 X X X X RSSWP-24MCCH-FR Red 5167 X X X – RSSWP-24MCCH-FW White 5187 X X X – Audible strobe ASWP-2475C-FR Red 4251 X X X X ASWP-2475C-FW White 4502 X X X X ASWP-24MCCH-FR Red 5149 X X X – ASWP-24MCCH-FW White 5157 X X X – Multitone strobe MTWP-2474C-FR Red 4457 X X X X MTWP-2475C-FW White 4458 X X X X MTWP-24MCCH-FR Red 5102 X X X – MTWP-24MCCH-FW White 5122 X X X – Speaker strobe ET70WP-2475C-FR Red 4452 X X X ET70WP-2475C-FW White 4454 X X X ET70WP-24177C-FR Red 4845 X X X ET70WP-24177C-FW White 4859 X X X 5 Technical Data TD450112EN February 2019 EATON www.eaton.com Wheelock AH, AS, MT, RSS, ET70 Wall or ceiling mount models Table 7. Specification and ordering information Agency Approvals Model Number Finish Order Code UL ULC FM Audible AH-24WP-R Red 7416 X X X Horn MT-12/24-R MT-12/24-W Red White 5023 5024 X X X X X X Speaker ET-1010-R Red 3135 X Available X ET-1010-W White 3137 X Available X Mounting accessories Table 8. Ordering information Model Number Finish Order Code Backboxes IOB-R a Red 5046 IOB-W a White 5047 WPSBB-R a Red 9751 WPSBB-W a White 3033 WPBB-R a Red 9014 WPBB-W a White 4692 WBB-R Red 2959 WBB-W White 2960 a IOB, WPSBB and WPBB models include weep holes and plug in the event that moisture may have entered the appliance. Model Number Finish Order Code Gasket kit WP-KIT N/A 4486 Flush plates WFPA-R Red 4698 WFPA-W White 4701 WFP-R Red 4696 WFP-W White 4697 Table 9. Mounting options Surface Mount Flush Mount Mounting Options Exposed Conduit Concealed Conduit RSSWP Strobes WPSBB WPSBB + WP-KIT WFP ET70WP Speaker Strobes IOB IOB + WP-KIT WFP ASWP Horn Strobes WPBB WPBB + WP-KIT WFPA AHWP Horns WBB -–WFP ET-1010 Speakers WBB -–WFP MTWP Multitone Strobes IOB IOB + WP-KIT WFP Multitone IOB IOB + WP-KIT WFP otee:N Refer to Data Sheet TD450028EN for mounting options Eaton is a registered trademark. All other trademarks are property of their respective owners. Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com Eaton Life safety & mass notification solutions 273 Branchport Ave. Long Branch, NJ 07740 Eaton.com/massnotification © 2019 Eaton All Rights Reserved Printed in USA Publication No. TD450112EN February 2019 Technical Data TD450112EN Effective February 2019 Wheelock AH, AS, MT, RSS, ET70 Architects and engineers specifications General Weatherproof notification appliances shall be UL listed for outdoor use. Weatherproof strobe appliances shall be listed under UL Standard 1638 (Standard for Visual Signaling Appliances) for Indoor/Outdoor use and UL Standard 1971 (Standard for Safety Signaling Devices for Hearing Impaired). The appliances shall be available for optional wall mounting or ceiling mounting to weatherproof backboxes using either exposed conduit, concealed conduit, or semi-flush mounting to a recessed electrical box in walls or ceilings using Wheelock mounting accessories. Weatherproof Strobes and Audibles Weatherproof strobe appliances shall be Wheelock RSSWP models or approved equals. The weatherproof strobes shall produce a mini- mum flash rate of 60 flashes per minute over the UL Regulated Voltage Range of 16 to 33 VDC and shall incorporate a Xenon flashtube. The weatherproof strobes shall be available with UL 1971 candela ratings up to 185 cd for wall mounting and 177 cd for ceiling mounting. UL 1638 candela ratings up to 180 cd at 77°F shall be available. The strobes shall operate over an extended temperature range of –40°F to 150°F (–40°C to 66°C) and be listed for maximum humidity of 95% RH. Strobe inputs shall be polarized for compatibility with standard reverse polarity supervision of circuit wiring by a Fire Alarm Control Panel (FACP). Weatherproof audibles shall be Wheelock AH models or approved equals, and the weatherproof audible/strobe combinations shall be Wheelock ASWP models or approved equals. The weatherproof horns and multitone audibles shall be listed for Indoor/Outdoor use under UL Standard 464. The horns shall be able to produce a continuous output or a temporal code-3 output that can be synchronized. The horns shall have at least 3 sound level settings. Horn/strobe combinations shall be able to be synchronized on a single NAC. Multitone audibles shall Wheelock MT models or approved equals. The multitone horns shall be able to produce 8 distinct tones selectable by dip switch and shall have at least 2 sound level settings. Multitone audible/strobe combinations shall have independent inputs for the audible and strobe. The strobes shall be able to be synchronized. When set to Code 3 Horn, the audible shall be able to be synchronized. The audibles shall be able to be coded when operated on a separate NAC. ASWP audibles and strobes shall be able to be synchronized on a 2-wire circuit with the ability to silence the audible if required. The strobes on MT multitone audible/strobe appliances shall be able to be synchronized and shall be able to be operated on a separate circuit from the audibles while the audible circuit is connected to a coded or continuous NAC. When set to Code 3 Horn, the MT multitone audibles shall be able to be synchronized. Weatherproof Speakers and Speaker/Strobes Weatherproof speakers shall be Wheelock ET-1010 models or approved equals, and speaker strobes shall be ET70WP or approved equals. Weatherproof speakers and speaker strobes shall be UL listed for indoor/outdoor use under UL Standard 1480. All speakers shall provide field selectable taps for 1/8W to 8W operation for either 25 VRMS or 70 VRMS audio systems and shall incorporate a sealed back construc- tion for extra protection and improved audibility. Speakers shall be listed to produce up to 94 dBA and shall incorporate a vandal resistant grille design. Speaker strobes shall be available for surface or semi-flush mounting to walls or ceilings and shall be listed to produce up to 93 dBA. Sync Modules When synchronization of strobes or temporal code-3 audibles is required, the appliances shall be compatible with the Wheelock DSM sync modules, Wheelock power supplies or other manufacturers panels with built-in Wheelock patented sync protocol. The strobes and audibles shall not drift out of synchronization at any time during operation. Weatherproof Mounting Accessories Weatherproof mounting options shall include surface mounting or semi-flush mounting to walls or ceilings. Surface mounted appliances shall mount to Wheelock IOB, WBB, WPBB or WPSBB weatherproof backboxes using either exposed conduit or concealed conduit. For concealed conduit the weatherproof backbox shall be mounted to a recessed electrical box with Wheelock’s WP-KIT to provide a weatherproof seal for the electrical box. Semi-flush mounted appliances shall mount to a recessed electrical box using Wheelock WFP or WFPA flush plates to provide a weatherproof seal between the electrical box and the appliance. WE ENCOURAGE AND SUPPORT NICET CERTIFICATION 3-YEAR WARRANTY Description: Strobe, Horn Strobe, and Horn Notification Appliances Notification Ceiling Wall Wheelock® ExcederTM Series TM *** ***5 The Wheelock® ExcederTM Series of notification appliances feature a sleek modern design that will please building owners with reduced total cost of ownership. Installers will benefit from its comprehensive feature list, including the most candela options in one appliance, low current draw, no tools needed for setting changes, voltage test points, 12/24 VDC operation, universal mounting base and multiple mounting options for both new and retrofit construction. The Wheelock® ExcederTM Series incorporates high reliability and high efficiency optics to minimize current draw allowing for a greater number of appliances on the notification appliance circuit. All strobe models feature an industry first of 8 candela settings on a single appliance. Models with an audible feature 3 sound settings (90, 95, 99 dB). All switches to change settings, can be set without the use of a tool and are located behind the appliance to prevent tampering. Wall models feature voltage test points to take readings with a voltage meter for troubleshooting and AHJ inspection. The Wheelock® ExcederTM Series of wall and ceiling notification appliances feature a Universal Mounting Base (UMB) designed to simplify the installation and testing of horns, strobes, and combination horn strobes. The separate universal mounting base can be pre-wired to allow full testing of circuit wiring before the appliance is installed and the surface is finished. It comes complete with a Contact Cover for protection against dirt, dust, paint and damage to the contacts. The Contact Cover also acts as a shunting device to allow pre-wire testing for common wiring issues. The Contact Cover is polarized to prevent it from being installed incorrectly and prevents the appliance from being installed while it is on the UMB. When the Contact Cover is removed the circuit will show an open until the appliance is installed. The UMB allows for consistent installation and easy replacement of appliances if required. Wall models provide an optional locking screw for extra secure installation, while the ceiling models provide a captivated screw to prevent the screw from falling during installation. - Save up to 48% in current draw* - Up to 9 models now in 1 appliance - Save up to 14% cost of installation** Compatibility and Requirements - Synchronize using the Wheelock® Sync Modules or panels with built-in Wheelock® Patented Sync Protocol - Compatible with UL “Regulated Voltage” using filtered VDC or unfiltered VRMS input voltage - Strobes produce 1 flash per second over the “Regulated Voltage” range * Compared to competitive models ** Compared to previous models *** Patented * UL max current rating is the maximum RMS current within the listed voltage range (16-33 VDC for 24 VDC units). For strobes the UL max current is usually at the minimum listed voltage (16 VDC for 24 VDC units). For audibles the max current is usually at the maximum listed voltage (33 VDC for 24 VDC units). For unfiltered ratings, see installation instructions. Strobe Ratings per UL Standard 1971 UL Max Current* 24 VDC / 24 FWR 12 VDC Model Regulated Voltage Range VDC 15 15/75 30 60 75 95 110 115 135 150 177 185 15 15/75 ST 8.0-33.0 0.057 0.070 0.085 0.135 0.163 0.182 0.205 0.253 0.110 0.140 STC 8.0-33.0 0.061 0.085 0.103 0.135 0.163 0.182 0.205 0.253 0.110 Horn Strobe Ratings per UL 1971 & Anechoic at 24 VDC UL Max Current* at Anechoic 99 dBA 24 VDC 12 VDC Model Regulated Voltage Range VDC 15 15/75 30 60 75 95 110 115 135 150 177 185 15 15/75 HS 8.0-33.0 0.082 0.095 0.102 0.148 0.176 0.197 0.242 0.282 0.125 0.159 HSC 8.0-33.0 0.082 0.102 0.141 0.148 0.176 0.197 0.242 0.282 0.125 UL Max Current* at Anechoic 95 dBA 24 VDC 12 VDC Model Regulated Voltage Range VDC 15 15/75 30 60 75 95 110 115 135 150 177 185 15 15/75 HS 8.0-33.0 0.073 0.083 0.087 0.139 0.163 0.186 0.230 0.272 0.122 0.153 HSC 8.0-33.0 0.073 0.087 0.128 0.139 0.163 0.186 0.230 0.272 0.122 UL Max Current* at Anechoic 90 dBA 24 VDC 12 VDC Model Regulated Voltage Range VDC 15 15/75 30 60 75 95 110 115 135 150 177 185 15 15/75 HS 8.0-33.0 0.065 0.075 0.084 0.136 0.157 0.184 0.226 0.267 0.120 0.148 HSC 8.0-33.0 0.065 0.084 0.120 0.136 0.157 0.184 0.226 0.267 0.120 Horn Ratings per UL Anechoic Model Regulated Voltage Range VDC 99 dB 95 dB 90 dB HN 16-33.0 0.064 0.044 0.022 HNC 16-33.0 0.084 0.044 0.022 HN 8.0-17.5 0.047 0.026 0.017 HNC 8.0-17.5 0.047 0.026 0.017 Low Current Draw = Fewer Power Supplies NOTE: All CAUTIONS and WARNINGS are identified by the symbol . All warnings are printed in bold capital letters. WARNING: PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR APPLYING THIS PRODUCT. VISIT WWW.COOPERNOTIFICATION.COM OR CONTACT COOPER NOTIFICATION FOR THE CURRENT INSTALLATION INSTRUCTIONS. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS, CAUTIONS OR WARNINGS COULD RESULT IN IMPROPER APPLICATION, INSTALLATION AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS. General Notes: General Notes: • Strobes are designed to flash at 1 flash per second minimum over their “Regulated Voltage Range”. • All candela ratings represent minimum effective strobe intensity based on UL Standard 1971. • Series Exceder Strobe products are Listed under UL Standards 1971 and 464 for indoor use with a temperature range of 32°F to 120°F (0°C to 49°C) and maximum humidity of 93% (± 2%) UL 464 (85% UL 1971). • Series Exceder horns are under UL Standard 464 for audible signal appliances (Indoor use only). Specification & Ordering Information Model Strobe Candela Sync w/ DSM or Wheelock Power Supplies 12/24 VDC*Mounting Options Horn Strobes HSR 15/1575/30/75/95/110/135/185 X X UMB** HSW 15/1575/30/75/95/110/135/185 X X UMB** HSRC 15/30/60/75/95/115/150/177 X X UMB** HSWC 15/30/60/75/95/115/150/177 X X UMB** Strobes STR 15/1575/30/75/95/110/135/185 X X UMB** STW 15/1575/30/75/95/110/135/185 X X UMB** STRC 15/30/60/75/95/115/150/177 X X UMB** STWC 15/30/60/75/95/115/150/177 X X UMB** Horn HNR X X UMB** HNW X X UMB** HNRC X X UMB** HNWC X X UMB** Strobe Ratings per UL Standard 1971 UL Max Current* 24 VDC / 24 FWR12 VDC ModelRegulated Voltage Range VDC1515/75306075951101151351501771851515/75 ST8.0-33.00.0570.0700.0850.1350.1630.1820.2050.2530.1100.140 STC8.0-33.00.0610.0850.1030.1350.1630.1820.2050.2530.110 Horn Strobe Ratings per UL 1971 & Anechoic at 24 VDC UL Max Current* at Anechoic 99 dBA 24 VDC12 VDC ModelRegulated Voltage Range VDC1515/75306075951101151351501771851515/75 HS8.0-33.00.0820.0950.1020.1480.1760.1970.2420.2820.1250.159 HSC8.0-33.00.0820.1020.1410.1480.1760.1970.2420.2820.125 UL Max Current* at Anechoic 95 dBA 24 VDC12 VDC ModelRegulated Voltage Range VDC1515/75306075951101151351501771851515/75 HS8.0-33.00.0730.0830.0870.1390.1630.1860.2300.2720.1220.153 HSC8.0-33.00.0730.0870.1280.1390.1630.1860.2300.2720.122 UL Max Current* at Anechoic 90 dBA 24 VDC12 VDC ModelRegulated Voltage Range VDC1515/75306075951101151351501771851515/75 HS8.0-33.00.0650.0750.0840.1360.1570.1840.2260.2670.1200.148 HSC8.0-33.00.0650.0840.1200.1360.1570.1840.2260.2670.120 Model Legend HN = Horn ST = Strobe HS = Horn Strobe C = Ceiling Mount W = White R = Red Example 1: STRC = Strobe, Red, Ceiling Mount Example 2: HSR = Horn Strobe, Red, Wall Mount Example 3: HSW = Horn Strobe, White, Wall Mount Example 4: STW-AL = Strobe, White, Wall Mount, Alert Lettering Common base for wall and ceiling with 5 mounting options Voltage test points for quick troubleshooting and easy spot checking (wall models only) Example: HSR8 candelas on 1 device1 gang, 2 gang, 4” sq, 3.5” octal & 4” octal boxes8 candela settings NOTE: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance with Cooper Wheelock Inc., dba Cooper Notification standard terms and conditions. **UMB = Universal Mounting Base *UMBEasy to remember model codesExample: HSWC Contact Cover *12 VDC models feature 15 & 15/75 settings A = Agent Lettering (Strobes only) AL = Alert Lettering (Strobes only) N = No Lettering (Strobes only) The notification appliances shall be Wheelock® Exceder™ Series HS Audible Strobe appliances, Series ST Visual Strobe appliances and Series HN Audible appliances or approved equals. The Series HS and ST Strobes shall be listed for UL Standard 1971 (Emergency Devices for the Hearing-Impaired) for Indoor Fire Protection Service. The Series HS and HN Audibles shall be UL Listed under Standard 464 (Fire Protective Signaling). All Series shall meet the requirements of FCC Part 15 Class B. All inputs shall be compatible with standard reverse polarity supervision of circuit wiring by a Fire Alarm Control Panel (FACP) with the ability to operate from 8 to 33 VDC. Indoor wall models shall incorporate voltage test points for easy voltage inspection. The Series HS Audible Strobe and ST Strobe appliances shall produce a flash rate of one (1) flash per second over the Regulated Voltage Range and shall incorporate a Xenon flashtube enclosed in a rugged Lexan® lens. The Series shall be of low current design. Where Multi-Candela appliances are specified, the strobe intensity shall have 8 field selectable settings at 15, 15/75, 30, 75, 95, 110, 135, 185 candela for wall mount and 15, 30, 60, 75, 95, 115, 150, 177 candela for ceiling mount. The selector switch for selecting the candela shall be tamper resistant. The 15/75 candela strobe shall be specified when 15 candela UL Standard 1971 Listing with 75 candela on-axis is required (e.g. ADA compliance). Appliances with candela settings shall show the candela selection in a visible location at all times when installed. The audible shall have a minimum of three (3) field selectable settings for dBA levels and shall have a choice of continuous or temporal (Code 3) audible outputs. The Series HS Audible Strobe, ST Strobe and Series HN Audible shall incorporate a patented Universal Mounting Base that shall allow mounting to a single-gang, double-gang, 4-inch square, 3.5-inch octal, 4-inch octal or 100mm European type back boxes. Two wire appliance wiring shall be capable of directly connecting to the mounting base. Continuity checking of the entire NAC circuit prior to attaching any notification appliances shall be allowed. Product shall come with Contact Cover to protect contact springs. Removal of an appliance shall result in a supervision fault condition by the Fire Alarm Control Panel (FACP). The mounting base shall be the same base among all horn, strobe, horn strobe, wall and ceiling models. All notification appliances shall be backwards compatible. The Series HS and ST wall models shall have a low profile measuring 5.24” H x 4.58” W x 2.19” D. Series HN wall shall measure 5.24” H x 4.58” W x 1.6” D. The Series HSC and STC shall been round and have a low profile with a diameter of 6.68” x 2.63” D. Series HNC ceiling shall have a diameter of 6.68” x 1.50” D. When synchronization is required, the appliance shall be compatible with Wheelock®’s DSM Sync Modules, Wheelock® Power Supplies or other manufacturer’s panels with built-in Wheelock® Patented Sync Protocol. The strobes shall not drift out of synchronization at any time during operation. If the sync protocol fails to operate, the strobe shall revert to a non-synchronized flash-rate and still maintain (1) flash per second over its Regulated Voltage Range. The appliance shall also be designed so that the audible signal may be silenced while maintaining strobe activation when used with Wheelock® synchronization protocol. Wall Appliances – UL Standard 1971, UL Standard 464, California State Fire Marshal (CSFM), ULC, FM Ceiling Appliances – UL Standard 1971, UL Standard 464, California State Fire Marshal (CSFM), ULC, FM Exceder - Spec Sheet 6/11 WE ENCOURAGE AND SUPPORT NICET CERTIFICATION 3 YEAR WARRANTY NotificationCooper Notification is NJ Location 273 Branchport Ave. Long Branch, NJ 07740 P: 800-631-2148 F: 732-222-8707 www.coopernotification.com Architects and Engineers Specifications Agency Listings 4-Wire Photoelectric Duct Smoke Detector The InnovairFlex™ Series are the only duct smoke detectors flexible enough to fit configurations from square to rectangular and everything in between. Features • Photoelectric, integrated low-flow technology • Air velocity rating from 100 ft/min to 4,000 ft/min (0.5 m/s to 20.32 m/sec) • Versatile mounting options: square or rectangular configuration • Plug-in sensor offers superb false alarm immunity and the latest sensor technology • Broad ranges for operating temperature (–4°F to 158°F) and humidity (0% to 95% non-condensing) • Patented sampling tube installs from front or back of the detector with no tools required • Increased wiring space with a newly added ¾-inch conduit knockout • One easy-access Test/Reset button and improved LED status • Patented interconnect feature for multi-fan shutdown • New high contrast terminal designations • Built-in short circuit protection from operator wiring errors • Field selectable settings for configuring the detector • Two DPDT Form-C relay contacts • 24 VAC/DC or 120 VAC • Backward compatibility with existing Innovair products, including remote accessories The InnovairFlex D4120 4-wire photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints and mounts to round or rectangular ductwork. This unit senses smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute, temperatures of –4°F to 158°F, and a humidity range of 0 to 95 percent (non- condensing). A plug-in sensor head offers improved false alarm immunity and simple installation, testing, and maintenance. An improved cover design isolates the sensor head from the low-flow feature for simple maintenance. The InnovairFlex housing provides ample wiring space, a ¾-inch conduit knockout, and built-in short circuit protection to prevent damage to sensitive components during installation. High contrast terminal designations make wiring easy. With its 2:1 sensor-to-power capability, the power board of the D4120 may be used to monitor a second sensor, D4S, simultaneously (i.e., supply and return side). As many as 50 InnovairFlex detectors can be interconnected. When one unit senses smoke, all interconnected detectors will switch their relays; only the detector sensing smoke will go into alarm, thus pinpointing the fire source. An easy-access Test/Reset button makes it possible to test the unit with the cover on. Three DIP switches can be used to configure field selectable settings: cover tamper delay, number of sensors to be controlled, and shut down on trouble option. Each power board has two LEDs that can be used to indicate the status of connected sensors, and a quick reference imprinted on the cover explains the LED status indications (Standby, Maintenance, Trouble, and Alarm). The InnovairFlex duct smoke detector can be customized to meet local codes and specifications without additional wiring. The new InnovairFlex product line is compatible with all previous Innovair models, including remote test accessories. WARNING: Duct smoke detectors are NOT a substitute for open area smoke detectors; NOT a substitute for early warning detection; NOT a replacement for a building’s regular fire detection system. Refer to NFPA 72 and 90A for additional information.S911 3029700 3242-1653:207 2202 A05-0419-002 InnovairFlex™ Duct Smoke Detector Specifications Architectural/Engineering Specifications The air duct smoke detector shall be a System Sensor InnovairFlex™ D4120 Photoelectric Duct Smoke Detector. The detector housing shall be UL listed per UL 268A specifically for use in air handling systems. The flexible housing of the duct smoke detector fits multiple footprints from square to rectangular. The detector shall operate at air velocities of 100 feet per minute to 4000 feet per minute (0.5 to 20.32 meters/second). The unit shall be capable of controlling up to 50 air handling systems when interconnected with other detectors. The detector shall be capable of providing a trouble signal in the event that the front cover is removed. It shall be capable of local testing via magnetic switch, test button on the cover, or remote testing using the SSK451 Multi-Signaling Accessory or the RTS451KEY Remote Test Station. Terminal connections shall be of the strip and clamp method suitable for 12–18 AWG wiring. Physical Specifications Size: (Rectangular Dimensions) (Square Dimensions) 14.38 in (37 cm) Length; 5 in (12.74 cm) Width; 2.5 in (6.36 cm) Depth 7.75 in (19.7 cm) Length; 9 in (22.9 cm) Width; 2.5 in (6.35 cm) Depth Weight:2.5 lbs (1.14 kg) Operating Temperature Range:D4120 & D4S: –4° to 158°F (–20° to 70°C); D4P120: –40° to 158°F (–40° to 70°C) Storage Temperature Range:D4120 & D4S: –22° to 158°F (–30° to 70°C); D4P120: –40° to 158°F (–40° to 70°C) Operating Humidity Range:0% to 95% relative humidity non-condensing Air Duct Velocity:100 to 4000 ft/min (0.5 to 20.32 m/sec) Electrical Ratings Power supply voltage:20–29 VDC 24 VAC 50–60 Hz 120 VAC 50–60 Hz Input capacitance:270 µF max.270 µF max.N/A Reset voltage:3.0 VDC min.2.0 VAC min.10 VAC min. Reset time: (with RTS451).03 to 0.3 sec..03 to 0.3 sec..03 to 0.3 sec. Reset time: (by power down)0.6 sec. max.0.6 sec. max.0.6 sec. max. Power up time:35 sec. max.35 sec. max.35 sec. max. Alarm response time:15 sec.15 sec.15 sec. Sensitivity Test:See detector label See detector label See detector label Current Requirements: (Using No Accessories) Max. standby current:21 mA @ 24VDC 65 mA RMS @ 24VAC 60Hz 20 mA RMS @ 120VAC 60Hz Max. alarm current:65 mA @ 24VDC 135 mA RMS @ 24VAC 60Hz 35 mA RMS @ 120VAC 60Hz Contact Ratings Alarm initiation contacts: (SPST)2.0A @ 30 VDC (resistive) Alarm auxiliary contacts: (DPDT)10A @ 30 VDC (resistive); 10A @ 250 VAC (resistive); ½ HP @ 240 VAC ; ¼ HP @ 120 VAC Note: Alarm auxiliary contacts shall not be connected to initiating circuits of control panels. Use the alarm initiation contact for this purpose. Supervisory contacts: (SPDT)2.0A @ 30 VDC (resistive); 2.0A @ 125 VAC (resistive) Accessory Current Loads at 24 VDC Device Standby Trouble Alarm APA151/APA451 12.5 mA n/a 30 mA Max. MHR/MHW 0 mA n/a 29 mA Max. RA100Z 0 mA n/a 12 mA Max. RTS151/RTS151KEY 0 mA/12 mA n/a 12 mA Max. RTS2/RTS2-AOS 3.0mA max 16 mA Max.with strobe: 55 mA max; without strobe 30 mA max Note: Any combination of accessories may be used such that the given accessory loads are: 110 mA or less at the Aux output, and 50 mA or less at the Alarm output Installing the InnovairFlex Sampling Tube The InnovairFlex sampling tube may be installed from the front or back of the detector. The tube locks securely into place and can be removed by releasing the front or rear locking tab (front locking tab shown below right). A05-0419-002 Wiring for 4-wire Duct Smoke Detector and Accessories Important Notes on 2:1 Sensor-to-Power Capability • 2:1 sensor-to-power capability is not available for all InnovairFlex models. The feature is only available on the D4120 4-wire conventional models. • 2:1 sensor-to-power capability can be enabled using one D4120 and one D4S, or two D4S and one D4P120. Important Interconnect Notes • When using the interconnect feature, all interconnected units must be powered using the same independent supply. • Polarity must be maintained throughout the interconnect wiring. Connect the INT+ terminal on unit 1 to the INT+ terminal on unit 2 and so on. Similarly, connect the INT/AUX– terminal on unit 1 to the INT/AUX- terminal on unit 2 and so on. • Up to 50 D4120 units, 50 D4P120 units, or 50 units of combination may be interconnected. • Up to 10 DH100ACDC units may be interconnected. Please note that each of the 9 DH100ACDC units interconnected may be replaced by three D4P120 units. Therefore, when using the interconnect feature a single DH100ACDC can drive either 9 DH100ACDCs or 27 D4120 units. * NOTE: Alarm can be reset only at the initiating device and not at the devices interconnected. NOTE 1: 24V Power Inputs accept a non-polarized 24VDC or 24VAC 50-60Hz. 120VAC Power Inputs accept only 120VAC 50-60Hz. Connect power source to appropriate terminals of each detector. See specifications for additional power supply information. NOTE 2: Auxiliary contacts shown in standby position. Contacts switch during alarm as indicated by arrows. Auxiliary contacts are not to be used for connection to the control panel. See specifications for contact ratings. NOTE 3: Supervisory contacts shown in standby position. Open contacts indicate a trouble condition to the panel. See specifications for contact ratings. NOTE 4: Alarm Initiation contacts shown in standby position. Closed contacts indicate an alarm condition to the panel. See specifications for contact ratings. *Please refer to the corresponding installation manual for accessory wiring diagrams. 24VAC/DC 9 10 AUXILIARY CONTACTS FOR FAN SHUTDOWN, ETC. (NOTE 2) 16 6 17 8 18 7 N.O.C.N.C.N.O.C.N.C. 16 6 17 8 18 7 N.O.C.N.C.N.O.C.N.C. SUPERVISORY CONTACTS (NOTE 3) 24V 9 10 AUXILIARY CONTACTS FOR FAN SHUTDOWN, ETC. (NOTE 2) SUPERVISORY CONTACTS (NOTE 3) SUP C.SUP N.O.SUP N.O.SUP C. 5 4ALARM INITIATION CONTACTS (NOTE 4) 5 4ALARMINITIATION CONTACTS (NOTE 4) ALARM INITIATION LOOP UL/FM LISTED 4-WIRE CONTROL PANEL + 120 VAC 120 VAC OR OR AUX A AUX BAUX A AUX B ALARM C.ALARM C. ALARM N.O.ALARM N.O. 14 1433 FIRST DETECTOR IN THE LOOP POWER INPUTS (NOTE 1)POWER INPUTS (NOTE 1) LAST DETECTOR IN THE LOOP EOL RESISTOR SPECIFIED BY PANEL MANUFACTURER 3825 Ohio Avenue • St. Charles, IL 60174 Phone: 800-SENSOR2 • Fax: 630-377-6495 ©2010 System Sensor. Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. A05-0419-002 • 2/10 • #2305 Accessories System Sensor provides system flexibility with a variety of accessories, including two remote test stations and several different means of visible and audible system annunciation. As with our duct smoke detectors, all duct smoke detector accessories are UL listed. Ordering Information Part No.Description D4120 4-wire photoelectric low-flow duct smoke detector Accessories D4S 4-wire photoelectric sensor component only MHR Mini Horn, Red D4P120 4-wire photoelectric power board component only, 24 VAC/DC, 120 VAC MHW Mini Horn, White 2D51 4-wire conventional photoelectric sensor head P48-21-00 End cap for metal sampling tubes DST1 Metal sampling tube duct width up to 1ft (0.3m)RA100Z Remote annunciator alarm LED DST1.5 Metal sampling tube duct widths 1 ft to 2 ft (0.3 to 0.6 m) RTS151 Remote test station DST3 Metal sampling tube duct widths 2 ft to 4 ft (0.6 to 1.2 m)RTS151KEY Remote test station with key lock DST5 Metal sampling tube duct widths 4 ft to 8 ft (1.2 to 2.4 m)RTS2 - AOS Multi-signaling accessory DST10 Metal sampling tube duct widths 8 ft to 12 ft (2.4 to 3.7 m) APA151 Remote annunciator with piezo alarm DH400 OE-1 Weatherproof enclosure ETX Metal exhaust tube duct width 1ft (0.3m) M02-04-00 Test magnet RTS151 UL S4011 RA100Z UL S2522 RTS151KEY UL S2522 MHW UL S4011 MHR UL S4011 APA151 UL S4011 RTS2-AOS UL S2522 AOS Agency Listings Duct Smoke Detector Accessories Expand the versatility of the InnovairFlex™ line of duct smoke detectors with System Sensor notification and test accessories. Available Accessories APA151 Piezo Annunciator MHR Mini-Horn, Red MHW Mini-Horn, White RA100Z/RA100ZA Remote Annunciator RTS151 Remote Test Station RTS151KEY Remote Test Station with Key RTS2 Multi-Signaling Accessory AOS Add-On Strobe RTS2-AOS Multi-Signaling Accessory Duct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options. All System Sensor duct smoke detectors and accessories are UL listed. The APA151 piezo annunciator, which replaces the APA451 with a new, improved look, provides an audible alarm signal, a red LED to indicate alarm status, and a green LED to indicate power status. It is intended for use with System Sensor 4-wire conventional duct smoke detector applications without a system control panel, to comply with NFPA 90A. The MHR and MHW SpectrAlert® Advance mini-horns feature temporal or continuous tones at high and low volume settings. Their small footprint allows mounting to single-gang back boxes for applications where a small device is desired. The RA100Z and RA100ZA remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition. The RTS151 and RTS151KEY remote test stations are automatic fire detector accessories designed to test duct smoke detectors from a convenient location. For 4-wire detectors, the RTS151KEY test station features a multi-colored LED that alternates between steady green and red. For 2-wire detectors, the LED illuminates red for alarm. The RTS2 and RTS2-AOS multi-signaling accessories are designed to work with InnovairFlex 4-wire conventional duct smoke detectors. These accessories include a key switch that can be used to select one of two connected sensors to be tested, reset, or both by a push button switch. They also enable sensitivity measurements using the SENS-RDR sensitivity reader (sold separately). The AOS (Add-On Strobe) is an optional accessory included with the RTS2-AOS model. 3825 Ohio Avenue • St. Charles, IL 60174 Phone: 800-SENSOR2 • Fax: 630-377-6495 ©2009 System Sensor. Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. A05-0423-000 • 5/09 • #1840 APA151 Piezo Annunciator Voltage Regulated 24 VDC Operating Voltage 16 to 33 VDC Maximum Alarm Current 30 mA Temperature Range 0°C to 49°C (32°F to 120°F) Relative Humidity 10 to 93% non-condensing Wire Gauge 12 to 18 AWG Dimensions 4.6˝ H × 2.9˝ W × .45˝ D MHR/MHW SpectrAlert® Advance Mini-Horns Voltage Regulated 12 DC or FWR (Full Wave Rectified) or Regulated 24 VDC or FWR Operating Voltage 8 to 33 VDC (9 to 33 VDC with Sync•Circuit™ Module) Sounder Current Draw 22 mA RMS max. at 8 to 17.5 Volts DC 17 mA RMS max. at 8 to 17.5 Volts FWR 29 mA RMS max. at 16 to 33 Volts DC 25 mA RMS max. at 16 to 33 Volts FWR Temperature Range 0°C to 49°C (32°F to 120°F) Humidity Range 10 to 93% non-condensing Nominal Sounder Frequency 3 kHz Wire Gauge 12 to 18 AWG Dimensions 4.6˝ H × 2.9˝ W × 0.45˝ D RA100Z/RA100ZA Remote Annunciator Voltage Range Conventional System: 3.1 to 32 VDC Intelligent System: 18 to 32 VDC Maximum Alarm Current 12 mA Dimensions 4.6 ˝ H × 2.8˝ W × 1.3˝ D Specifications, Duct Smoke Detector Accessories RTS151 Remote Test Station Power Requirements Alarm LED: 2.8 to 32 VDC, 12 mA max. Total Current: 105 mA max. Test Switch 10 VA @ 32 VDC Reset Switch 10 VA @ 32 VDC Alarm Response Time 40 seconds max. Temperature Range –10°C to 60°C (14°F to 140°F) Relative Humidity 95% non-condensing Wire Gauge 14 to 18 AWG Dimensions 4.8˝ H x 2.90˝ W x 1.4˝ D RTS151KEY Remote Test Station with Key Power Requirements Power LED (Green): 14 to 35 VDC, 12 mA max. Alarm LED (Red): 2.8 to 32 VDC, 12 mA max. Total Current: 105 mA max. Alarm Response Time 40 seconds max. Temperature Range –10°C to 60°C (14°F to 140°F) Relative Humidity 95% non-condensing Wire Gauge 14 to 18 AWG Dimensions 4.6˝ H × 2.75˝ W × 1.8˝ D RTS2 and RTS2-AOS Multi-signaling Accessory Voltage 20 to 29 VDC Power Requirements Standby: 3.0 mA max. Trouble: 16.0 mA max. Alarm without strobe: 30 mA max. Alarm with strobe: 55 mA max. Sounder 85 dBA at ten feet Temperature Range –10°C to 60°C (14°F to 140°F) Relative Humidity 95% non-condensing Wire Gauge 14 to 22 AWG Dimensions 4.8˝ W x 5.3˝ H x 1.6˝ D For the very latest product specifications and listing information, please visit the System Sensor Web site at www.systemsensor.com. RTS151 UL S4011 RA100Z UL S2522 RTS151KEY UL S2522 MHW UL S4011 MHR UL S4011 APA151 UL S4011 RTS2-AOS UL S2522 AOS DF-61011:B • 6/26/2019 — Page 1 of 3 H365 Series Addressable Heat Detectors Addressable Devices DF-61011:B The Fire•Lite® Alarms H365(A), H365R(A), and H365HT(A) addressable plug-in thermal detectors are designed for both perfor- mance and aesthetics and are a direct replacement for the H355 Series. A new modern, sleek, contemporary design and advanced thermal technologies make the H365(A) Series ideal for both system operation and building design. Exclusively for use with Fire•Lite’s addressable fire alarm control panels, the H365(A) Series point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for emergency personnel to quickly locate a fire during its early stages, potentially saving precious rescue time while also reducing property damage. Two LEDs on each sensor light to provide a local, visible sensor indication. The H365(A) Series includes fixed temperature, rate-of-rise and high heat fixed temperature detectors that provide effective, intelli- gent property protection for a variety of applications. Detectors are available for both LiteSpeed™ and CLIP applications as designated. Features SLC LOOP: • Two-wire SLC loop connection • Unit uses base for wiring ADDRESSING: • Addressable by device • Rotary, decimal addressing (Refer to the Fire•Lite panel manuals for device capacity.) ARCHITECTURE: •Designed to meet UL 268 7th Edition • Sleek, low-profile, stylish design • State-of-the-art thermistor technology for fast response • Integral communications and built-in device-type identification •Built-in tamper resistant feature •Built-in functional test switch activated by external magnet OPERATION: •Fixed temperature model (H365(A)) factory preset to 135°F (57°C) •Rate-of-rise model (H365R(A)), 15°F (8.3°C) per minute •High-temperature model (H365HT(A)) factory preset to 190°F (88°C) •360°-field viewing angle of the two visual alarm indicators, LEDs blink red in Normal condition and turn on steady red in Alarm •LEDs blink every time the unit is polled MECHANICALS: •Sealed against back pressure •SEMS screws for wiring of the separate base •Designed for direct-surface or electrical-box mounting •Plugs into separate base for ease of installation and maintenance •Separate base allows interchange of photoelectric, ionization and thermal sensors OTHER SYSTEM FEATURES: • Remote test feature from the panel • Walk test with address display • Low standby current OPTIONS: • Remote LED output connection to optional RA100Z remote LED annunciator Installation H365 Series plug-in intelligent thermal detectors use a detachable base to simplify installation, service and maintenance. Installation instructions are shipped with each detector. Mount detector base (all base types) on an electrical backbox which is at least 1.5" (3.81 cm) deep. For a chart of compatible junction boxes, see DF-60059. NOTE: Because of the inherent supervision provided by the SLC loop, end-of-line resistors are not required. Wiring “T-taps” or branches are permitted for Style 4 (Class “B”) wiring only. When using relay or sounder bases, consult the I300(A) installation sheet I56-3626 for device limitations between isolator modules and iso- lator bases. Applications Use thermal detectors for protection of property. For further informa- tion, refer to I56-6525, Applications Manual for System Smoke Detectors, which provides detailed information on detector spacing, placement, zoning, wiring, and special applications. Construction These detectors are constructed of fire-resistant plastic. The H365 Series plug-in intelligent thermal detectors are designed to commer- cial standards and offer an attractive appearance. Operation Each H365 Series detector uses one of the panel’s addresses (total limit is panel dependent) on the Fire•LiteJCI Signaling Line Circuit (SLC). It responds to regular polls from the control panel and reports its type and the status. If it receives a test command from the panel (or a local magnet test), it stimulates its electronics and reports an alarm. It blinks its LEDs when polled and turns the LEDs on when commanded by the panel. The H365 Series offers features and per- formance that represent the latest in thermal detector technology. Page 2 of 3 — DF-61011:B • 6/26/2019 Product Line Information NOTE: “-IV” suffix indicates CLIP and LiteSpeed device. NOTE: “A” suffix indicates Canadian version. H365: White, low-profile intelligent 135°F fixed thermal sensor, LiteSpeed only H365A: Same as H365 but with ULC listing H365-IV: Ivory, low-profile intelligent 135°F fixed thermal sensor, LiteSpeed and CLIP H365A-IV: Same as H365-IV but with ULC listing H365R: White, low-profile intelligent rate-of-rise thermal sensor, LiteSpeed only H365RA: Same as H365R but with ULC listing H365R-IV: Ivory, low-profile intelligent rate-of-rise fixed thermal sen- sor, LiteSpeed and CLIP H365RA-IV: Same as H365R-IV but with ULC listing H365H: White, low-profile intelligent 190°F fixed thermal sensor, LiteSpeed only H365HA: Same as H365H but with ULC listing H365H-IV: Ivory, low-profile intelligent 190°F thermal sensor, Lite- Speed and CLIP H365HA-IV Same as H365H-IV but with ULC listing INTELLIGENT BASES NOTE: For details on intelligent bases, see DF-60059. B300-6: White, 6” base, standard flanged low-profile mounting base (CSFM: 7300-1653:0109) B300-6-IV: Ivory,6” base, standard flanged low-profile mounting base (CSFM: 7300-1653:0109) B300A-6: Same as B300-6, ULC listed B300A-6-IV: Ivory, 6” standard flanged low-profile mounting base, ULC listed B300-6-BP: Bulk pack of B300-6, package contains 10 B501-WHITE: White, 4” standard European flangeless mounting base. UL/ULC listed (CSFM: 7300-1653:0109) B501-BL: Black, 4” standard European flangeless mounting base. UL/ULC listed (CSFM: 7300-1653:0109) B501-IV: Ivory color, 4” standard European flangeless mounting base. UL/ULC listed (CSFM: 7300-1653:0109) B501-WHITE-BP: Bulk pack of B501-WHITE contains 10 B224RB-WH: White, relay base (CSFM: 7300-1653:0216) B224RB-IV: Ivory, relay base (CSFM: 7300-1653:0216) B224RBA-WH: White, relay base, ULC listing B224RBA-IV: Ivory, relay base, ULC listing B224BI-WH: White, isolator detector base (CSFM: 7300-1653:0216) B224BI-IV: Ivory isolator detector base (CSFM: 7300-1653:0216) B224BIA-WH: White, isolator detector base, ULC listing B224BIA-IV: Ivory isolator detector base, ULC listing B200S-WH: White, Intelligent addressable sounder base capable of producing sound output in high or low volume with ANSI Temporal 3, ANSI Temporal 4, continuous tone, marching tone, and custom tone. Uses FlashScan protocol. (CSFM: 7300-1653:0213) B200S-IV: Ivory, Intelligent addressable sounder base capable of producing sound output in high or low volume with ANSI Temporal 3, ANSI Temporal 4, continuous tone, marching tone, and custom tone. Uses FlashScan protocol. (CSFM: 7300-1653:0213) B200SA-WH: Same as B200S-WH, ULC listing B200SA-IV: Same as B200S-IV, ULC listing B200SCOA-WH: White, Intelligent, programmable sounder base in English/French (required in Canada for ULC applications with CO Series detector applications B200SCOA-IV: Ivory Intelligent, programmable sounder base in English/French (required in Canada for ULC applications with CO Series detector applications, ULC listing B200S-LF-WH: White, Low Frequency Intelligent, programmable sounder base. Produces a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent; designed to meet the NFPA 72 sleeping space requirement. (CSFM: 7300-1653:0238) B200S-LF-IV: Ivory, Low Frequency Intelligent, programmable sounder base. Produces a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent; designed to meet the NFPA 72 sleeping space requirement. (CSFM: 7300-1653:0238) B200SR-WH: White, Intelligent sounder base capable of producing sound output with ANSI Temporal 3 or continuous tone. Intended for retrofit applications. (CSFM: 7300-1653:0213) B200SR-IV: Ivory, Intelligent sounder base capable of producing sound output with ANSI Temporal 3 or continuous tone. Intended for retrofit applications. (CSFM: 7300-1653:0213) B200SRA-WH: Same as B200SR-WH with, ULC listing B200SRA-IV: Same as B200SR-IV in Ivory color, ULC listing B200SR-LF-WH: White, Low Frequency Intelligent, programmable sounder base. Produces a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent; designed to meet the NFPA 72 sleeping space requirement. Intended for retrofit applica- tions. (CSFM: 7300-1653:0238) B200SR-LF-IV: Ivory, Low Frequency Intelligent, programmable sounder base. Produces a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent; designed to meet the NFPA 72 sleeping space requirement. Intended for retrofit applica- tions. (CSFM: 7300-1653:0238) MOUNTING KITS AND ACCESSORIES TR300: White, replacement flange for B210LP(A) base TR300-IV: Ivory, replacement flange for B210LP(A) base RA100Z(A): Remote LED annunciator. 3-32 VDC. Mounts to a U.S. single-gang electrical box. For use with B501(A) and B300-6(A). M02-04-00: Test magnet M02-09-00: Test magnet with telescoping handle CK300: Color Kit (includes cover and trim ring), white, 10-pack CK300-IV: Color Kit (includes cover and trim ring), ivory, 10-pack CK300-BL: Color Kit (includes cover and trim ring), black, 10-pack LiteSpeed™ is a trademark and Fire•Lite® Alarms is a registered trademark of Honeywell International Inc. ©2019 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Page 3 of 3 — DF-61011:B • 6/26/2019 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX:(877) 699-4105. www.firelite.com Country of Origin: Mexico SYSTEM SPECIFICATIONS Size: 2.0" (5.3 cm) high; base determines diameter – B300-6: 6.1" (15.6 cm) diameter – B501: 4" (10.2 cm) diameter For a complete list of detector bases see DF-60983 Shipping weight: 3.4 oz. (95 g) Operating temperature range: • H365, H365R Series: –4°F to 100°F (–20°C to 38°C) • H365H Series: –4°F to 150°F (–20°C to 66°C) Detector spacing: UL approved for 50 ft. (15.24 m) center-to-cen- ter, FM approved for 25 x 25 ft. (7.62 x 7.62 m) spacing Relative humidity: 10% – 93% non-condensing Thermal ratings: fixed-temperature set point 135°F (57°C), rate-of- rise detection 15°F (8.3°C) per minute, high temperature heat 190°F (88°C) Mounting: B300-6(A) flanged base, included See “Product Line Information: Intelligent Bases,” if using a dif- ferent base. ELECTRICAL SPECIFICATIONS Voltage range: 15 - 32 volts DC peak Standby current (max. avg.): 200uA @ 24 VDC (one communica- tion every 5 seconds with LED enabled) Max current: 4.5 mA @ 24 VDC (“ON”) Listings and Approvals Listings and approvals below apply to the H365(A) Series detectors. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. • UL/ULC Listing: S2517 •FM Approved •CSFM: 7272-0075:0501 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7165-0075:0500 Page 1 of 2 CATEGORY: 7165 -- FIRE ALARM CONTROL UNIT (COMMERCIAL) LISTEE:FIRE-LITE ALARMS INC.One Fire-Lite Place, Northford, CT 06410-1653 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models ES-50X and ES-200X Addressable Fire Alarm Control Units. Automatic, manual, waterflow, sprinkler supervisory, local, remote station (PPU), and central station (PPU) services. The ES-50X is a compact version of the ES-200X. The ES-50X has 50 addressable device capability and 2 Notification Appliance Circuits with a 3.0 amps total 24VDC output in Alarm. The ES-200X has 198 addressable device capability and 4 Notification Appliance Circuits with 3.0amps total 24VDC output in Alarm expandable to 6.0amps with Model PWRMOD24. The Model IPOTS-COM provides Phone and IP communication. *The CELL-MODE has the option to be configured by a compatible control unit for the following pathways: Cellular only without a backup path, primary Cellular communication path, or secondary Cellular communication path. Models ES-50X and ES-200X system components are as follows: IPOTS-COM POTS and IP Communicator 4XTMF Transmitter Module ANN-80 Remote Annunciator Module ANN-100 Remote Annunciator Module ANN-I/O LED Driver Module ANN-S/PG Serial/Parallel Interface Module ANN-RLY Form-C Relay Module ANN-LED Annunciator Module ANN-RLED Annunciator Module CELL-MOD GSM Communicator DP-ES-R Dress Panel Model ES-200X system components are as follows: PWRMOD24 NAC Power Expander Module Refer to the listee's data sheet for additional detailed product description and operational considerations. RATING:120/240Vac 50/60Hz *Rev 10-01-19 gt July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. Listing No. Page 2 of 2 7165-0075:0500 INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as fire alarm control units, emergency alarm system control units and process management equipment for use with separately listed compatible initiating and indicating devices. Refer to Manufacturers Installation Instruction Manual for details. NOTE: For Fire Alarm Verification Feature (Delay of fire alarm), the maximum Retard/Reset/Restart period must be adjusted to 30 seconds or less. *Rev 10-01-19 gt July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7315-0075:0510 Page 1 of 1 CATEGORY: 7315 -- POWER UNITS LISTEE:FIRE-LITE ALARMS INC.One Fire-Lite Place, Northford, CT 06410-1653 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models FL-PS6 and FL-PS10 Power Supply Expander. Model Variations: Model FL-PS6: Maximum 6A Capacity; 5 Class B NAC's; 2 Command Inputs; Trouble and AC Loss Relays; Red Enclosure Model FL-PS10: Maximum 10A Capacity; 7 Class B NAC's; 3 Command Inputs; Trouble and AC Loss Relays; Red Enclosure Refer to listee's printed data sheet for detailed product description and operational considerations. RATING:Model FL-PS6: 120V AC, 50/60 Hz, 5.0A Maximum Model FL-PS10: 120V AC, 50/60 Hz, 6.2A Maximum INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as a power supply extender when used with separately listed compatible fire alarm control units. Refer to listee's Installation Instruction Manual for details. XLF:7315-0028:0513 10-08-20 VWW July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7300-1645:0511 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE:ADEMCO INC.2 Corporate Center Drive, Melville, NY 11747 Contact: Issa Khouryawad (516) 577-2312 Fax (516) 577-3540 Email: issa.khouryawad@resideo.com DESIGN: Models HWF2A-COM and HWF2V-Com Commercial Internet and LTE Communicator. The unit uses the Internet as its primary reporting path, and switches to cell service (secondary path as backup) when the Internet is not available. *The units are transmitters that captures DACT communication from a host panel and converts to IP and/or Cellular for transmission to the receiving station. Units also have the option for IP Only or Cellular only without a backup path. Refer to listee's product specification data sheets and installation, operation, and maintenance manual for detailed product description and operational considerations. RATING:Primary - 120 VAC, 60 Hz Secondary - 18 VAC, 5 VA INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as a control unit accessory for use with separately listed compatible commercial fire alarm control units. Refer to listee’s installation Instruction Manual for details. *Rev 08-01-19 gt July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7300-0553:0110 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE:SPACE AGE ELECTRONICS58 Chockett Road, Sterling, MA 01564 Contact: Robert Scholl (508) 485-0966 Fax (508) 485-4740 Email: bobs@1sae.com DESIGN: Models TC2-32, TC1-18, TCX/A 64, TCX/D 128, ACE/A, AC2, ACE/D, IF-2, IF1, IFX/A and IFX/D enclosures. Models ACE-11, ACE-12 and ACE-13, *ACE2424, *ACE 3036, *ACE 2436, *ACE 3048 document cabinets. Refer to listee's data sheet for detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number and UL label. APPROVAL: Listed as fire alarm equipment enclosures and document cabinets for use with listee's fire alarm equipment. Refer to listee’s Installation Instruction Manual for details. 02-09-16 dc July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7300-0075:0185 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE:FIRE-LITE ALARMS INC.One Fire-Lite Place, Northford, CT 06410-1653 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models MDF-300, MMF-301, MMF-300, MMF-302, MCF-300 monitor modules; Models CRF-300 and CMF-300 control modules; and MMF-302-6 six zone interface signaling device module. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING:15-32 VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model designation, electrical rating, and UL label. APPROVAL: Listed as control unit accessories for use with listee's separately listed electrically compatible fire alarm control units. NOTE: *Rev. 05-06-05 JW July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7272-0075:0502 Page 1 of 1 CATEGORY: 7272 -- SMOKE DETECTOR-SYSTEM TYPE-PHOTOELECTRIC LISTEE:FIRE-LITE ALARMS INC.One Fire-Lite Place, Northford, CT 06410-1653 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models SD365, SD365R and SD365T analog addressable, photoelectric smoke detectors for open area and duct installations. Model SD365T has a complementary heat detector. All models are similarl except for population/depopulation of components on the Printed Wiring Board for the intended features. All above models may be followed by two digit Suffix indicating the color of the detector enclosure: no suffix for white, -IV for ivory, -BL for black. Refer to listee's Installation and Maintenance Instruction for additional detailed product description and operational considerations. RATING:24 VDC. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as photoelectric smoke detectors. Detectors are for use with separately listed System Sensor base Models *B501, *B210LP (CSFM Listing 7300-1653:0109), *B350LP (CSFM Listing 7300-0075:0192), B200S and B200SR (CSFM Listing 7300-1653:0213), B200S-LF and B200SR-LF (CSFM Listing 7300-1653:0238), B300-6 and B300-6-IS bases (CSFM Listing 7300-1653:0109), System Sensor duct detector housings Models DNR and DNRW (CSFM listing 3240-1653:0209), Fire-Lite duct detector housing Model D355PL (CSFM listing 3240-0075:0221) and separately listed compatible fire alarm control units. Refer to manufacturer’s Installation Manual for details. *All models comply with the applicable requirements in ANSI/UL 268, Smoke Detectors for Fire Alarm Systems, 7th Edition, January 11, 2016. NOTE: The photoelectric type detectors are generally more effective at detecting slow, smoldering fires that smolder for hours before bursting into flame. Sources of these fire may include cigarettes burning in the couched or bedding. The ionization type detectors are generally more effective at detecting fast, flaming fires that consume combustible materials rapidly and spread quickly. Sources of these fires include paper burning in a waste container or a grease fire in the kitchen. XLF:7272-0028:0503 *Revision 12-17-19 VWW July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7150-1615:0122 Page 1 of 1 CATEGORY: 7150 -- FIRE ALARM PULL BOXES LISTEE:BOSCH SECURITY SYSTEMS130 Perinton Parkway, Fairport, NY 14450 Contact: Peter Namisnak (585) 678-3655 Fax (585) 678-3263 Email: peter.namisnak@us.bosch.com DESIGN: Models, FMM-462, FMM-462-D, FMM-325A, FMM-325A-D, FMM-7045, and FMM-7045-D fire alarm manual pull stations. Refer to listee's data sheet for detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinance and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as manual pull stations for use with listee's separately listed compatible fire alarm control units. Refer to listee’s Installation Instruction Manual for details. * These manual pull boxes meet the requirements of UL Standard 38, 1999 Edition and California amendments. NOTE: FORMERLY: 7150-0801:131 *Rev. 12-15-2009 fm July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7150-0075:0184 Page 1 of 1 CATEGORY: 7150 -- FIRE ALARM PULL BOXES LISTEE:FIRE-LITE ALARMS INC.One Fire-Lite Place, Northford, CT 06410-1653 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models BG-12, BG-12S, BG-12NC, BG-12W, BG-12LW, BG-12WP, BG-12LWP, BG-12L, BG-12LX, BG-12LA, BG-12PS, BG-12LSP, BG-12SP, BG-12LR, BG-12LRA, BG-12LAO, BG-12LAOB, BG-12-LO, BG-12LOB, BG-12LPS, BG-12LPSP, BG-12SL, UT-PS1 and UT-PS2 fire alarm pull boxes. The BG-12 series is a dual action pull station that has normally open switch contacts. Refer to listee's data sheet for detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number and UL label. APPROVAL: Listed as fire alarm boxes for use with separately listed compatible fire alarm control units. Models BG-12WP, BG-12W, BG-12LW and BG-12LWP are intended for outdoor use when installed with Model WP-10 back box. Models BG-LAOB and BG-12LOB are intended for outdoor use when installed with Model WBB or WP-10 back box. * These manual pull boxes meet the requirements of UL Standard 38, 1999 Edition and California amendments. XLF:7150-0028:0199 *Updated 08-17-09 fm July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7300-0075:0159 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE:FIRE-LITE ALARMS INC.One Fire-Lite Place, Northford, CT 06410-1653 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models M300, M301 monitor modules, I300 isolator module and Model C300 and C304 control modules. Refer to listee's data sheet for detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, and UL label. APPROVAL: Listed as control unit accessories for use with listee's separately listed compatible Model MS-9200 control unit (CSFM Listing No. 7165-0075:158). NOTE: XL:7300-1209:152. This file was deleted. Duplicate. *Rev. 05-06-05 July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7125-0785:0131 Page 1 of 2 CATEGORY: 7125 -- FIRE ALARM DEVICES FOR THE HEARING IMPAIRED LISTEE:Cooper Wheelock Inc.7246 16th St. E., Ste. 105, Sarasota, FL 34243 Contact: Thomas Conover (941) 487-2336 Email: thomaslconover@eaton.com DESIGN: Models AS-1215, -2415, -1230, -2430, -121575, -241575, -2475 and -24110 audible/strobes for the hearing impaired followed by any three alpha/numeric characters indicating lens orientation, lettering and color. Models AS-1215W, -2415W, -1230W, -2430W, -121575W, -241575W, -2475W and -24110W audible/strobes for the hearing impaired followed by any three alpha/numeric characters indicating lens orientation, lettering and color. These units with suffix -W are for wall mount only. *Models AS-121575W and AS-241575W lens color may be white, red, blue, green, or amber. Models AS-2415C, -2430C, -2475C and -24100C audible/strobes for the hearing impaired followed by two alpha/numeric characters indicating lens lettering, orientation and color. These units are intended for ceiling mount only. Model AH-12, -24, AH-12WP, -24WP audible appliances (no strobe), followed by an alpha or numeric character indicating product color. Model AS-24MCW and AS-24MCC audible/strobe, followed by any two alpha or numeric character indicating lettering and product color. *Lens color may be white, red, blue, green, or amber. Models ASWP-2475W and *ASWP-2475C audible/strobe with integral private mode fire/emergency visual signaling for non-hearing impaired applications. Lens color may be white, red, blue, green, and amber. Both models are suitable for outdoor use when mounted on the Model WPBB back box. Models AS-24MCWH, AS-24MCCH, *ASWP-24MCWH, and *ASWP-24MCCH audible/strobes for the hearing impaired followed by two alpha/numeric characters indicating lens lettering and product color. Units with suffix CH are for ceiling mount only. Units with suffix WH are for wall mount only. *Lens color may be white, red, blue, green, or amber. Refer to the listee's data sheet for detailed product description and operational considerations. *Rev. 10-01-07 July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. Listing No. Page 2 of 2 7125-0785:0131 RATING:Electrical: 8-17.5/16-33 VDC/VFWR Flash Rate: 60 flashes/minute Candela: 15:15cd,1575:15/75cd,30:30cd,75:75cd,95:95cd,100:100cd,110:110cd MCW: Selectable 15cd, 30cd, 75cd,110cd MCC: Selectable 15cd, 30cd,75cd,95cd MCWH: Selectable 135cd,185cd (65cd, 90cd at -40 C) MCCH: Selectable 115cd,177cd (50cd, 75cd at -40 C) INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. Models ASWP-2475W, ASWP-24MCWH, AS-24MCW and AS-24MCWH are for wall mount only. Models ASWP-2475C, ASWP-24MCCH, AS-24MCCH, AND AS-24MCC are for ceiling mount only. Models with suffix -W or WH are for wall mount only. Models with suffix -C or -CH are for ceiling mount only. MARKING: Listee's name, model number, electrical/candela rating, and UL label. APPROVAL: Listed as audible and audible/visual signaling devices suitable for the hearing impaired when used in conjunction with separately listed electrically compatible fire alarm control units. For indoor use only except Models AH-12WP, AH-24WP, *ASWP-2475W, ASWP-2475C, ASWP-24MCWH, and ASWP-24MCCH audible appliances are suitable for indoor/outdoor. For synchronization, Models AS Series must be used with Model SM-12/24, SMX-12/24, DSM-12/24 or DSMX-12/24 sync control module (CSFM Listing No. 7300-0785:132). Refer to listee’s Installation Instruction Manual for details. These appliances can generate a distinctive three-pulse Temporal Pattern Fire Alarm Evacuation Signal (for total evacuation) in accordance with NFPA 72, 2002 Edition. NOTE: Models AH-12, AH-24, -12WP and -24WP audible devices are not suitable for the hearing impaired applications. *Rev. 10-01-07 July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7125-0785:0168 Page 1 of 1 CATEGORY: 7125 -- FIRE ALARM DEVICES FOR THE HEARING IMPAIRED LISTEE:Cooper Wheelock Inc.7246 16th St. E., Ste. 105, Sarasota, FL 34243 Contact: Thomas Conover (941) 487-2336 Email: thomaslconover@eaton.com DESIGN: Exceder Series: Models ST strobe, HS horn strobe and HN horn. Model ST is a synchronous and non-synchronous strobe light. Model HS a visual/audible appliance and Model HN is an audible signal appliance. All units followed by R (red) or W (white). Additionally, a ‘C’ may be added for ceiling models and/or a ‘-NR’ may be added for non-resettable models. For non -NR models and optional ‘S’ for silver fascia may be added*. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING:Electrical: 12 VDC/24VDC/FWR Candela (wall)*: 15, 15/75, 30, 75, 95, 110, 135 & 185 Candela (ceiling)*: 15, 30, 60, 75, 95, 115, 150, & 177 INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. All models are for indoor use and for wall mount only or ceiling mount only* MARKING: Listee's name, model number, electrical/candela rating, and UL label. APPROVAL: Listed as horn for fire alarm signaling and strobe, horn /strobe for the hearing impaired when used with separately listed electrically compatible fire alarm control units. Refer to listee ’s Installation Instructions Manual for details. *Rev. 9-24-09 fm July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.3242-1653:0207 Page 1 of 1 CATEGORY: 3242 -- DUCT SMOKE DETECTOR, PHOTO. (W/ OR W/O BASE) LISTEE:System Sensor, Unincorporated Div of Honeywell Int'l Inc.3825 Ohio Ave, St. Charles, IL 60174 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models D4120, D4240, RD4120, P270-3000PL, TD41203, TD41204, LD4S, LD4120X, LD4120H, D4S, D4P120, CD4P120 LD4P120X, LD4P120H, TD4C, PD4120, YD4120, YD4P120, and AD4P120 four-wire conventional photoelectric duct smoke detectors and subassemblies. Unit consists of a duct detector housing, powerboard with electrical components and relays, exhaust tubes, and listed 2D51 detector head (CSFM Listing No. 7272-1653:203). Model AD4S sensor component. Models *TD4C, LD4120X, LD4120H, LD4P120X and LD4P120H do not contain a 120 VAC transformer. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING:20-29 VDC, *24 VAC, 120 VAC (except Models *TD4C, LD4120X, LD4120H, LD4P120X and LD4P120H *do not have 120 VAC rating). INSTALLATION: In accordance with listee's printed installation instruction, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, rating, air velocity and UL label. APPROVAL: Listed as conventional photoelectric duct smoke detector for use with separately listed fire alarm control units. Refer to listee’s Installation Instruction Manual for details. *Rev. 03-27-13 gt July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7300-1653:0212 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE:System Sensor, Unincorporated Div of Honeywell Int'l Inc.3825 Ohio Ave, St. Charles, IL 60174 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models RTS151, RTS151KEY and RA100Z Duct Smoke Detector accessories. Refer to listee's data sheet for detailed product description and operational considerations. RATING:Refer to the installation manuals. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as control unit accessories for use with separately listed compatible fire alarm control units. Refer to listee’s Installation Instruction Manual for details. 04-03-09 bh July 01, 2021Date Issued:Listing Expires June 30, 2022 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other DAVID CASTILLO,, M.E., F.P.E. 1 Ferguson, Bryttany@CALFIRE Subject:FA2021-0008 - LOWES 205 - FIRE ALARM ROUGH WIRE Location:78865 HIGHWAY 111 Start:Tue 1/18/2022 11:00 AM End:Tue 1/18/2022 12:30 PM Recurrence:(none) Meeting Status:Accepted Organizer:Jose Delgado Required Attendees:Jose Delgado; Kohl Hetrick Optional Attendees:Ferguson, Bryttany@CALFIRE Categories:LQ INSPECTION Rep. Name: RICK EDWARDS 760-535-6255 Co. Name: Phone#: Cell#: CrossSt: HYDRANT SYSTEM PASS FAIL FIRE ALARM PASS FAIL Thrust block pre-pour X Rough-wire inspection X Underground rough Function test Underground hydro Duct detectors/velocity Flush 24 hr. battery test Final Sprinkler monitoring SPRINKLER U.G. Final Thrust block pre-pour SPECIAL SUPPRESSION Underground rough Door fan test Underground hydro Abort test Flush Mechanical shutdown Final Detector test FIRE SPRINKLER Deluge/pre-action Weld inspection Final Overhead rough piping UST/AST TANK Overhead hydro Installation UG flush / OK to connect Removal Main drain/Inspect. Test Emergency shut off High pile storage Primary piping In-rack sprinklers Secondary piping Hose racks Dispensers & shear valves Final Final KITCHEN HOOD EXTINGUISHING MISC. INSPECTION Detection system Spray booths Function Test Hood/duct extinguishing Gas/Electrical shut-off High pile rack storage Nozzle model/placement H.P. vents/access/corridors Fire alarm connection Tract access/hydrant verification Final Other: FIRE & LIFE SAFETY INSPECTION SPRAY BOOTHS KNOX SYSTEM 2 Installation Building Knox box Air flow test Gate access Knox box/padlock Mechanical interlock BUILDING INSPECTIONS Extinguishing system T/I final Fire alarm connection Shell final Final Final for occupancy Start Time: Finish Time: FA2021-0008; FIRE ALARM ROUGH WIRE INSPECTION LOWES 205 APPROVED PLANS AND JOB CARD ON SITE; BUILT PER PLAN WITH EXCEPTION OF RTUs RELOCATED AND MARKED ON PLANS AND RELOCATION OF 1 HORN/STROBE IN GARDEN AREA TO APPROVED LOCATION AGAINST EAST WALL; NEW PULL AND ANNUNCIATOR IN FRONT OF STORE AND REMOVING OLDER DEVICES; NEW FACP, CELL PANEL, MONITOR MODULE WITH PULL STATION AND SMOKE; SHALL LABEL; NEW WATER FLOWS AND BUTTERFLYS AT RISERS AND NEW MANUAL PULL; SHALL HAVE ACCESS TO MANAGERS OFFICES AT FINAL INSPECTION; APPROVED FIRE ALARM ROUGH INSPECTION; SIGNED JOB CARD; BF Start Time: Finish Time: 3 Thank you, Bryttany Ferguson Fire Systems Inspector/Office of the Fire Marshal CAL FIRE/Riverside County Fire Department Proudly serving Riverside County Main: 760-863-8886 Cell: 760-217-0532 77933 La Montanas Rd. Ste. 201, Palm Desert, CA 92211 Bryttany.Ferguson@fire.ca.gov | www.rvcfire.org The Office of the County Fire Marshal is committed to facilitating fire and life safety solutions by empowering its employees to serve our community through innovation and partnership. Warning: this message is from an external user and should be treated with caution. Advise Jose of any clearances or corrections Fire Admin Assistant – Jose Delgado – 760-777-7128 - jodelgado@laquintaca.gov -----Original Appointment----- From: Jose Delgado <jodelgado@laquintaca.gov> Sent: Thursday, January 6, 2022 2:03 PM To: Jose Delgado; Hetrick, Kohl@CALFIRE Subject: FA2021-0008 - LOWES 205 - FIRE ALARM ROUGH WIRE When: Tuesday, January 18, 2022 11:00 AM-12:30 PM (UTC-08:00) Pacific Time (US & Canada). Where: 78865 HIGHWAY 111 Warning: this message is from an external user and should be treated with caution. Rick Edwards 760.535.6255 OFFICE OF THE FIRE MARSHAL – LA QUINTA 78495 Calle Tampico, La Quinta, CA 92253 • Phone (760) 777-7074 • www.rvcfire.org September 2, 2021 Vector Security Networks 2500 Maitland Center Pkwy Maitland, FL 32751 E-Tech Security Rick Edwards 139 Encanto Drive Escondido, CA 92027 Re: Fire Alarm System Plan Review – LOWE’S - FIRE ALARM UPGRADE FA2021-0008 / 78865 HIGHWAY 111, LA QUINTA, CA 92253 The fire alarm system plans you submitted for the above referenced project have been reviewed by Riverside County Fire Department - Office of the Fire Marshal personnel and require the following corrections or details: [1] On Sheet FA-0, please make the following adjustments/corrections: a. Module Address Table identifies functions of a Fire Pump. Confirm that a fire pump is present, and the modules need to be included. i. If so, Pump Run is permitted to be Supervisory (NFPA72:23.8.5.9.1) b. Module Address Table identifies function of Elevator and Elevator Recall. Confirm that an Elevator is present, and the modules need to be included. c. System Input/Output Matrix shows 14-Sprinkler Control Valve to “Acuate Common Trouble Signal Indicator.” I believe this should be “Actuate Audible Supervisory Signal”. d. System Riser Diagram adjustments: i. Identify Notification Appliance Circuits 11 & 12. ii. Provide unit addressing for the Notification Appliances that matches the plan location details. [2] On Sheet FA-2, please make the following adjustments/corrections: a. Correct the Symbol Legend. Strobe Only with a C indicator are indicated to also be wall mounted. b. Identify monitoring of the existing Post Indicator Valve located on the NW corner of the project. *Approximate location indicated on the plans and can be confirmed on Google Street View. [3] On Sheet FA-3, Please make the following adjustments/corrections: a. At locations indicating an arrow for the Notification Appliance Circuit returning to the NAC, provide notation of the NAC and Output number. b. Number the NAC locations appropriately on the plan location details. c. Notification Appliance Circuit 20 ends at device 2. No further detail is provided for the additional 9 devices shown in the System Riser Diagram. d. There is no detailed information for Notification Appliance Circuit 21 on the plan details. e. Does the “Lumber and Building Products” area have more notification? The 75cd fixed horn/strobes can only provide 45-feet of visual coverage. f. A ceiling mounted strobe is floating in the back Shipping/Receiving area with a unit address of 9-6. Rectify. All questions regarding the meaning of these conditions should be referred to the Office of the Fire Marshal staff at (760)777-7074. Kohl Hetrick - Fire Safety Specialist 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 OFFICE OF THE FIRE MARSHAL – LA QUINTA 78495 Calle Tampico, La Quinta, CA 92253 • Phone (760) 777-7074 • www.rvcfire.org September 29, 2021 Vector Security Networks 2500 Maitland Center Pkwy Maitland, FL 32751 E-Tech Security Rick Edwards 139 Encanto Drive Escondido, CA 92027 Re: Fire Alarm System 2nd Plan Review – LOWE’S - FIRE ALARM UPGRADE FA2021-0008 / 78865 HIGHWAY 111, LA QUINTA, CA 92253 The fire alarm system plans you submitted for the above referenced project have been reviewed by Riverside County Fire Department - Office of the Fire Marshal personnel and require the following corrections or details: [1] On Sheet FA-0, please make the following adjustments/corrections: a. Module Address Table still identifies components of a Fire Pump. Rectify. b. Module Address Table identifies “Test Header”. Correct to PIV Tamper. c. System Input/Output Matrix shows 14-Sprinkler Control Valve to “Actuate Common Trouble Signal Indicator.” I believe this should be “Actuate Audible Supervisory Signal”. NOT ADDRESSED d. System Riser Diagram adjustments: i. Identify Notification Appliance Circuit 22 correctly. ii. Provide unit addressing for the Notification Appliances that matches the plan location details. *SEE PLAN NOTES [2] On Sheet FA-2, please make the following adjustments/corrections: a. Correct the reference of “Test Header” monitoring to “PIV Tamper” monitoring [3] On Sheet FA-3, Please make the following adjustments/corrections: a. At locations indicating an arrow for the Notification Appliance Circuit returning to the NAC, provide notation of the NAC and Output number. NEED TO CORRECT THROUGHOUT. SEE PLAN NOTES b. Identify existing exterior water-flow bells. SEE PLAN NOTES FOR LOCATION. All questions regarding the meaning of these conditions should be referred to the Office of the Fire Marshal staff at (760)777-7074. Kohl Hetrick - Fire Safety Specialist 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 OFFICE OF THE FIRE MARSHAL – LA QUINTA 78495 Calle Tampico, La Quinta, CA 92253 • Phone (760) 777-7074 • www.rvcfire.org December 19, 2021 Vector Security 13555 Wellington Center Circle #123 Gainesville, VA 20155 E-Tech Security 139 Encanto Drive Escondido, CA 92027 Re: Fire Alarm System Plan Review – LOWES 208 FA2021-0008 / 78-865 HIGHWAY 111, LA QUINTA, CA 92253 The fire alarm system plans you submitted for the above referenced project have been reviewed by Riverside County Fire Department - Office of the Fire Marshal personnel and are approved with the following conditions. 1. For Central Station monitoring service, provide written documentation, at the time of acceptance testing, that there is a contract to provide the runner and maintenance services as required per NFPA 72. 2. The Office of the Fire Marshal staff shall witness the following inspections/tests: a) Rough-Wire Inspection – all wire not in conduit is exposed for inspection. b) Function Test / Start 24-hour Battery - The alarm installer shall provide all needed testing equipment to complete the final alarm inspection. c) 5-Minute Ring-out / Final Acceptance Testing and Certification 3. Provide a completed NFPA 72 Record of Completion that the system has been installed in accordance with the approved plans and specifications as required. 4. Operating, testing, and maintenance instructions, record drawings (“as builds”), site-specific software and equipment specifications shall be provided in a documentation cabinet in compliance with NFPA 72 Section 7.7.2 The Fire Department approved plans and conditions letter must be at the job site. Applicant/installer shall be responsible to contact the Fire Department to schedule inspections. Requests for inspections are to be made at least 48 hours in advance and may be arranged by calling (760)777-7131. All questions regarding the meaning of these conditions should be referred to the Office of the Fire Marshal staff at (760)777-7074. Kohl Hetrick - Fire Safety Specialist 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 RIVERSIDE COUNTY FIRE PROTECTION PLANNING RECORD OF INSPECTIONS / PERMIT CARD THIS CARD IS TO REMAIN ON SITE AT ALL TIMES. INSTALLING CONTRACTOR MUST BE PRESENT FOR ALL INSPECTIONS. SEE NOTES ON REVERSE SIDE. JOB ADDRESS: 78865 HIGHWAY 111 PERMIT#: FA2021-0008 DATE ISSUED: 12/19/2021 DESCRIPTION: LOWES 208 CONTRACTOR: E-TECH SECURITY / CSLB: 723960 HYDRANT SYSTEM DATE INITIALS SPECIAL SUPPRESSION DATE INITIALS Thrust block pre-pour Door fan test UG rough piping Abort test UG hydro Mechanical shutdown Flush Detector test Final E F Deluge/pre-action SPRINKLER U.G. Final E F Thrust block pre-pour UST/AST TANK UG rough piping Installation UG hydro Removal Flush Emergency shut off Final E F Primary piping FIRE SPRINKLER Secondary piping Weld inspection Dispensers & shear valves Overhead rough piping Final E F Overhead hydro MISC. INSPECTIONS UG flush / OK to connect Spray booths Main drain/inspectors’ test Hood/duct extinguishing High pile storage High pile rack storage In-rack sprinklers H.P. vents/access/corridors Hose racks Tract access/hydrant verification Final E F Access & Address verification HOOD EXTINGUISHING OTHER CONST. PERMIT Detection system Function test Gas/electrical shut-off Nozzle model/placement Fire alarm connection Final E F SPRAY BOOTHS FIRE CODE PERMIT(S) Installation Air flow test Mechanical interlock Extinguishing system Fire alarm connection Final E F FIRE ALARM KNOX SYSTEM Rough-wire inspection Building Knox box Function test Gate access Knox box/padlock Duct detectors/velocity BUILDING INSPECTIONS 24 hr. battery test T/I final Sprinkler monitoring Shell final Final E F Final for occupancy FINAL INSPECTION DATE: INSPECTORS SIGNATURE: **WHEN CALLING FOR AN INSPECTION PLEASE HAVE PERMIT NUMBER READY. SEE NOTES ON REVERSE SIDE** 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 INSPECTION NOTES 1. Sway bracing and hangers will be inspected at the time of rough piping inspection. 2. All required hydrostatic pressure tests shall maintain 200 psi for a 2-hour duration. (EX: Residential Fire Sprinkler Systems) 3. Fire sprinkler system remodels: if indicated on plans or this card, a hydrostatic pressure test shall be required. 4. All underground joints and thrusts blocks shall be exposed and readily visible during the hydrostatic test. 5. Contractor shall supply all testing equipment, access and operating instructions at time of test. 6. All systems shall be inspected, tested, and approved by a Fire Inspector before any work is started that may cause the affected system to be covered or hidden. POLICIES ON FIELD INSPECTIONS A. INSPECTION REQUESTS: Inspections are made subject to availability. Please have the permit number available when scheduling inspections. For City of La Quinta inspections call: (760) 777-7131. B. APPROVED PLANS: Shall be kept on the job site at all times that work is in progress. Work shall NOT commence without approved plans. C. INSPECTION REQUESTS: As required by the California Fire Code, the appropriate installing contractor shall be required to schedule the necessary inspections and be present on site for inspections. D. RE-INSPECTIONS: Will be charged against a permit when an inspection has failed, is not ready, the responsible party not on site or where previously noted corrections have not been completed. E. COMMODITIES: Unless otherwise noted on approved plans or letter of conditions, no commodities shall be entered into the structure until clearance has been granted by the Fire Dept and Building Official. F. OCCUPANCY: Buildings shall NOT be occupied by persons other than construction workers until a Final Fire Clearance has been granted by the Fire Dept and a Certificate for Occupancy has been issued by the Building Official. INSPECTION NOTES: THIS CARD IS REQURIED TO BE POSTED AT THE CONSTRUCTION SITE. THIS CARD AND APPROVED PLANS MUST BE AVAILABLE AT THE CONSTRUCTION SITE FOR ALL INSPECTIONS. THIS PERMIT SHALL EXPIRE AND BECOME NULL AND VOID IF THE WORK AUTHORIZED IS NOT COMMENCED WITHIN 180 DAYS OR IF THE WORK IS SUSPENDED OR ABANDONED FOR A PERIOD OF 180 DAYS OR MORE. THIS PERMIT IS FOR FIRE DEPARTMENT APPROVAL ONLY AND DOES NOT INTEND TO ABROGATE MORE RESTRICTIVE REQUIREMENTS OF OTHER AGENCIES HAVING RESPONSIBILITY.