Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
FA2022-0011
ADDITIONAL SITES CHRONOLOGY CONTACTS NAME TYPE NAME ADDRESS1 CITY STATE ZIP PHONE FAX EMAIL APPLICANT ROBERT BLACKBEAR 12728 SHOEMAKER AVE SANTA FE SPRINGS CA 90670 (562)201-1732 robert.anthony.blackb ear@jci.com BILL TO ROBERT BLACKBEAR 12728 SHOEMAKER AVE SANTA FE SPRINGS CA 90670 (562)201-1732 ROBERT.ANTHONY.BLA CKBEAR@JCI.COM CONTRACTOR JOHNSON CONTROLS 12728 SHOEMAKER AVE SANTA FE SPRINGS CA 90670 (562)201-1732 OWNER HP LQ INVESTMENT LP 150 RADNOR CHESTER RD STE A-270 RADNOR PA 19087 (562)201-1732 CONDITIONS Description: MODIFY EXISTING FIRE ALARM: PROVIDE NEW DEVICES, RELOCATE. Type: FIRE ALARM (WEB)Subtype: COMMERCIAL - FIRE ALARM SYSTEM Status: ISSUED Applied: 8/23/2022 EPRS Parcel No: 658190011 Site Address: 49499 EISENHOWER DR LA QUINTA,CA 92253 Approved: 10/5/2022 KHET Subdivision: TR 28545-3 Block: Lot: 30 Issued: ONLINE Lot Sq Ft: 0 Building Sq Ft: 0 Zoning: Finaled: Valuation: $20,914.00 Occupancy Type: Construction Type: Expired: No. Buildings: 0 No. Stories: 0 No. Unites: 0 Details: FINANCIAL INFORMATION Printed: Friday, March 03, 2023 3:12:50 PM 1 of 3 Permit Details City of La Quinta PERMIT NUMBER FA2022-0011 ATTACHMENTS Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED DOC 8/23/2022 Etrakit Public Registration 1STSUBMITTAL FIRE ALARM PLANS LaQuintaHiltonElevMod -650133048.pdf 1 BOND INFORMATION INSPECTIONS REVIEWS REVIEW TYPE REVIEWER SENT DATE DUE DATE RETURNED DATE STATUS REMARKS NOTES 1ST FIRE (2 WK)KOHL HETRICK 8/23/2022 9/7/2022 10/5/2022 APPROVED SEE ATTACHMENTS 1ST PERMIT TECH (1 DAY) AARON HICKSON 8/23/2022 8/24/2022 8/23/2022 COMPLETE PARENT PROJECTS DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE RECEIPT #CHECK #METHOD PAID BY CLTD BY FIRE ALARM SYSTEMS 101-0000-42421 0 $175.00 $175.00 10/10/22 WEB13286 738678062 CREDIT ROBERT BLACKBEAR EPRS FIRE ALARM SYSTEMS PC 101-0000-42420 0 $263.00 $263.00 10/10/22 WEB13286 738678062 CREDIT ROBERT BLACKBEAR EPRS Total Paid for FIRE FEES: $438.00 $438.00 RECORDS MANAGEMENT FEE 101-0000-42416 0 $11.00 $11.00 10/10/22 WEB13286 738678062 CREDIT ROBERT BLACKBEAR EPRS Total Paid for RECORDS MANAGEMENT FEE: $11.00 $11.00 TECHNOLOGY ENHANCEMENT FEE 502-0000-43611 0 $5.00 $5.00 10/10/22 WEB13286 738678062 CREDIT ROBERT BLACKBEAR EPRS Total Paid for TECHNOLOGY ENHANCEMENT FEE: $5.00 $5.00 TOTALS:$454.00 $454.00 Printed: Friday, March 03, 2023 3:12:50 PM 2 of 3 Permit Details City of La Quinta PERMIT NUMBER FA2022-0011 ATTACHMENTS Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED DOC 8/23/2022 Etrakit Public Registration 1ST SUBMITTAL FIRE ALARM DATA SHEETS LaQuintaElevMod- 650133048DATA.pdf 1 DOC 10/5/2022 KOHL HETRICK FA2022-0011 - APPROVED PLANS.pdf FA2022-0011 - APPROVED PLANS.pdf 1 DOC 10/5/2022 KOHL HETRICK FA2022-0011 - COA AND JOB CARD.pdf FA2022-0011 - COA AND JOB CARD.pdf 1 Printed: Friday, March 03, 2023 3:12:50 PM 3 of 3 Permit Details City of La Quinta PERMIT NUMBER FA2022-0011 SM1-17(L1)110V1-6S1-6.5WEAOMM1-30(L1)AOMM1-31(L1)SM1-18(L1)AOMM1-(L1)FM1-106(L2) E1101:SIG3-1EM1-123SM1-154(L1)AOMM1-151(L1)AOMM1-152(L1)AOMM1-153L1)MMM1-124SHEET:DRAWN BY:CHECKED BY:JOB #:PROJECT #:DESCRIPTIONCADDATEMARKSYSTEM:CHKISSUE DATE:30" x 42" - Arch E1 Size ISSUE LOG:Revisions shown with # symbol NSCALE:PARKING GARAGE ELEV. MECH. RM.1/8" = 1'-0"LAST PRINTED:LAST SAVED BY:FILE PATH:C:\Users\jjotom3\OneDrive - Johnson Controls\La Quinta Mountain_Dunes - Master\LaQuintaHiltonElev-650133048\Fire\FA-101.dwg8/14/2022 5:21:59 PM JJOTOM3 436:650133048MMLTLJ08/14/22FIRE ALARM SYSTEMLA QUINTA HILTON 49499 EISENHOWER DRIVE, LA QUINTA, CA 92253 9287 CHARLES SMITH AVE. RANCHO CUCAMONGA, CA 91730PHONE: 909-987-7546 SERVICE: 909-987-7546 FAX: 909-989-6718 DISTRICT - 436FA-101DEVICE PLACEMENT PLAN,CALCULATIONS, DETAILSJOHNSON CONTROLS © 2022LA QUINTA HILTON ELEVATOR MOD.© Johnson Controls 2022. All rights reserved. Reuse, copying, modification or alteration of the drawings and other information contained herein is strictly prohibited.SAOMFIRE ALARM SYMBOL LEGENDQTYSYMBOLDESCRIPTIONBRANDMODELBACKBOXWIRECSFM #TYPEINITIATING DEVICES1ADDRESSABLE PHOTOELECTRIC SMOKE SENSOR W/ STANDARDBASESIMPLEX4098-9714 HEAD4" OCT, 1-1/2" DM7272-0026:02184098-9792 BASE7300-0026:02172ADDRESSABLE STANDARD HEAT SENSOR W/ STANDARD BASESIMPLEX4098-9733 HEAD4" OCT, 1-1/2" DM7270-0026:02164098-9792 BASE7300-0026:0217MODULES AND RELAYS4DUAL RELAY IAMSIMPLEX4090-90084" SQ. 2-1/8" D W/ DBL. GANG COVERM7300-0026:0311RACCEPTABLECABLE TYPESFIRE ALARM WIRE LEGENDFPLR FPLP THHN TFFN OUTDOOR ** C.I.CIRCUIT DESCRIPTIONCONSTRUCTIONGAUGECIRCUIT PROPERTIESMIDNETUTP SOLID18 AWG0.60µF MAX TOTAL LINECAPACITANCEXXRRELAY2 COND. SOLID14 AWGXXXXCONDUIT SIZEMAX CONDUCTOR AREACONDUIT SIZEMAX CONDUCTOR AREA1/2"0.122 SQ. INCH*1-1/4"0.598 SQ INCH*3/4"0.213 SQ INCH*1-1/2"0.814 SQ INCH*1"0.346 SQ INCH*2"1.342 SQ INCH** 40% CONDUIT FILL PER N.E.C.STP = SHIELDED TWISTED PAIRITEMS SUCH AS CAPACITANCE BETWEEN CONDUCTORS AND WIRE GAUGE CAN BE CRUCIAL TO THE CIRCUIT DESIGN OF THIS SYSTEMINSTALLATION. THE INSTALLING CONTRACTOR IS RESPONSIBLE FOR SELECTING AND INSTALLING CABLE MANUFACTURER AND MODELTHAT MEETS OR EXCEEDS THE ABOVE REQUIREMENTS. RECOMMENDED CABLE MANUFACTURERS AND MODEL NUMBERS ARE AVAILABLEUPON REQUEST.GENERAL NOTES:1.ALL CEILINGS ARE ASSUMED TO BE 10' A.F.F., SMOOTH CONSTRUCTION UNLESSNOTED OTHERWISE.2.THE DEVICE ADDRESSES INDICATED ON THESE DRAWINGS ARE ANALPHANUMERIC DESCRIPTION OF WHICH CIRCUIT THE DEVICE IS LOCATED ON.DEVICES MAY BE ASSIGNED A DIFFERENT NUMBER WITHIN THE PANEL PROGRAM.CONSULT WITH A JOHNSON CONTROLS TECHNICIAN BEFORE APPLYING APHYSICAL LABEL TO ANY DEVICES.SCALE:ADOBE BLDG. LEVEL 11/8" = 1'-0"SCALE:ADOBE BLDG. LEVEL 21/8" = 1'-0"BALLROOMS 4100es FACPStandbyTotalAlarmTotalModuleQtyDescriptionCurrentStandbyCurrentAlarmPanel Equipment4100-911114100 CONFIG. DOMESTIC 120V*0.37300.37300.47000.47004100-12452FLEX 50 EXPANSION NAC BOARD0.00840.01680.06000.12004100-125412 CHANNEL AUDIO OPERATOR INTERFACE0.00000.00000.02400.02404100-13122ANALOG FLEX 50W AMP W/3 CLASS B NACS 25V0.08500.17002.27004.54004100-51013EXPANSION PWR SUPPLY (XPS) - 120VAC 60HZ0.05000.15000.05000.15004100-51152EXPANSION NAC MODULE - 3 NACS0.02500.05000.02500.05004100-60521EVENT REPORTING DACT0.03000.03000.04000.04004100-60562NETWORK MEDIA CARD WIRED0.05500.11000.05500.11004100-60781NETWORK IF CARD, MODULAR0.04600.04600.04600.04604100-96201BASIC AUDIO WITH MICROPHONE - ANALOG0.25500.25500.58500.5850Panel Totals1.20086.1350IDNet Addressable Devices (SLC)4009-920114009 IDNET NAC EXTENDER, 120 VAC*Constant current draw of .8mA standby and 1mA alarm per address used.Devices requiring additional current are accounted for in the sectionlabeled "Miscellaneous Peripheral Devices Requiring Additional SystemPower".4090-90084ADDRESSABLE DUAL CONTACT RELAY IAM*4090-901068 AMP RELAY IAM*4090-905115IDNET E-SERIES SUPERVISED IAM*4090-91161INTELLIGENT IDNET ISOLATOR MODULE*4098-971474TRUEALARM PHOTO SMOKE SENSOR4098-97332TRUEALARM HEAT SENSOR*4098-975616TRUEALARM DUCT SMOKE SENSOR W/ RELAY OUTPUT*4098-979276TRUEALARM SENSOR BASE*4099-902145ADDRESSABLE SINGLE ACTION NO GRIP PULL STATION*Miscellaneous Peripheral Devices That Require (Additional) System Power4098-984316ENCAPSULATED RELAY PAM-SD0.00000.00000.01500.24004098-975616TRUEALARM DUCT SMOKE SENSOR W/ RELAY OUTPUT0.00300.04800.01500.2400DH24120FPC2DOOR HOLDER,SEMI-FLUSH,CHROME0.02000.04000.00000.00004098-984516DUCT WEATHERPROOF ENCLOSURE0.00000.00000.00000.00007002T-242WHEELOCK HORN/STROBE0.00000.00000.06300.1260Notification AppliancesSetting4906-91011V/O MC NON-ADDRESS, RED, WALL750.00000.00000.18600.18604906-912714A/V MC NON-ADDRESS, RED, WALL1100.00000.00000.28503.99004906-91272A/V MC NON-ADDRESS, RED, WALL750.00000.00000.22100.44204906-915113S/V M-C NON-ADDRESS, RED, WALL1100.00000.00000.25203.27604906-915114S/V M-C NON-ADDRESS, RED, WALL150.00000.00000.06000.84004906-91511S/V M-C NON-ADDRESS, RED, WALL300.00000.00000.09400.09404906-91516S/V M-C NON-ADDRESS, RED, WALL750.00000.00000.18601.1160EXIST-DEV4EXISTING SG NOTIFICATION APPLIANCES150.00000.00000.03500.1400Peripheral Totals0.088010.6900RUI Totals00.00000.0000Address Totals164Addresses0.13120.1640* Device Address current draw included below (See Additional Current Draws):System Totals*:Standby1.4200Alarm16.98902. Backup Amplifier assumes Main Amplifier alarm current on failure.StandbyStandbyAlarmAlarmBattery Set #1 (Cabinet/Charger #1)CurrentTotalCurrentTotalSelect ALL Power Supplies on this battery set:SPS-10.64705.7040XPS-10.33006.3360XPS-20.23684.7100XPS-30.07500.0750Sub Total1.288816.8250Additional Current Draws:RUI Connected Peripheral Devices0x 0.0035= 0.0000x 0.0035= 0.0000MAPNET/IDNet Device Address Communication Current164x 0.000800= 0.1312x 0.001000= 0.1640Sub Total1.420016.9890Spare addressable point capacity0%0x 0.0008= 0.0000x 0.001= 0.0000Total1.420016.9890Standby Time =24Hrsx 1.4200= 34.0800Standby AhAlarm Time =15Min0.25 x 16.989= 4.2473Alarm Ah38.3273Additional Spare Battery Capacity =0%+0.000038.3273Battery Discharge Factor =20%+7.6655Minimum Battery Required2081-9296 50AH (2x)45.9927Battery Supplied2081-9296 50AH (2x)* System Totals represent total system current requirements. Those currents may be distributed between multiple battery sets or power supplies as shown above.StandbyStandbyAlarmAlarmADDED 4ADDED 3ADDED 1ADDED 2SCALE:EXISTING BALLROOM FACP REVISED BATTERY CALCULATION NO SCALEDEVICE MOUNTING HEIGHT REFERENCEPER NFPA 72SIDE WALLCEILINGVISUAL APPLIANCE MOUNTING HEIGHT CONSIDERATIONS IN SLEEPING ROOMS1.MIN DISTANCE IN SLEEPING ROOMS IS 24" (610mm) FROM CEILING TO TOPOF LENS FOR 110CD STROBES WITHIN 16' OF THE PILLOW2.177CD STROBES, USED IN SLEEPING ROOMS, CAN BE WITHIN THE 24"(610mm) MINIMUM DISTANCE FROM THE CEILING. THE HIGHER INTENSITY ISTO COMPENSATE FOR A POSSIBLE SMOKE LAYER.AUDIBLE ONLYAUDIBLE/VISUAL& VISUAL ONLYAPPLIANCESSYNCHRONIZE MORETHAN TWO APPLIANCESIN ANY FIELD OF VIEW.NOTE: REFER TO THE PROPER DEVICEINSTALLATION INSTRUCTIONSFOR BACKBOX MOUNTING HEIGHT.NOTE: MEASUREMENTSSHOWN ARE TO THE CLOSESTEDGE OF THE DETECTOR.THE 4" REQUIREMENT FOR SMOKE DETECTORS HASBEEN REMOVED FROM THE 2010 EDITION OF NFPA 72CEILING MOUNTEDSMOKE/HEATDETECTORACCEPTED HEREHEAT DETECTORSNEVER HEREWALL MOUNTEDSMOKE/HEAT DETECTOR4"(102mm)4"(102mm)3' (914mm)MINIMUMA/C SUPPLYOR RETURNDIFFUSERFINISHEDFLOORFIREMAGNETICDOORHOLDERFIREPHONEJACKFOR CEILING HEIGHTS LESS THAN 86"(2180mm), THE VISUAL LENS MOUNTING HEIGHTSHALL BE WITHIN 6" (150mm) OF THE CEILING.96" MAX (ADA, IBC, NFPA)(2440mm MAX)ABOVE FINISHED FLOORTO TOP OF LENS48" MAX (ADA) (1219mm)48" MAX (NFPA, ADA) (1219mm MAX)42" MIN (NFPA) (1067mm MIN)MEASUREMENTS SHOWN ARETO TOP OF PULL HANDLEMANUAL PULLSTATIONTO EXIT DOOR5' (MAX.)(1524mm)DOORWIDTHLESS 3"(76mm)5"(127mm)90" MIN (2286mm MIN)ABOVE FINISHED FLOOR(OTHER MOUNTING HEIGHTS SHALL BEPERMITTED BY THE AHJ PROVIDING IT MEETSTHE SOUND LEVEL OUTPUT REQUIRED.)NFPA 72 AUDIBLE APPLIANCE 6" MIN(152.4mm MIN) BELOW FINISHED CEILINGFIREFINISHEDWALL12" (305mm)MAXIMUM TO TOP OF SENSOR80" MIN (ADA, IBC, NFPA)(2032mm MIN)ABOVE FINISHED FLOORTO BOTTOM OF LENS0=OFF1=ON2412422442452432402472482502512492532542552522461931941961971952092102112122131922081451461481491471611621631641651441601761771781791801811992002022032012152162172182192052062072212222232042201511521541551531671681691701711571581591731741751561721831841851861871881891901911501661821982142242252262272282292302312322332342352362372382391286432786842423516ADDRESS SHOWN ABOVE IS 1201ON1OFF1291301321331319798100101991131141151161179611212881828485834950525351656667686948648013513613913813710310410610710511912012112212314214114310911011112512612710812414087889190895556585957717273747594939561626377787960769254708610211813433343637351245317181920210163239404342417810119232425262746454713141529303112284462238DIP SWITCHES 5 THRU 8DO NOT USE ADDRESS 0 FOR AN IDNET ADDRESS9NOTE:THE 4098-9771, -9794, -9795, -9798 SOUNDER BASES HAVE A 9-POSITION DIP SWITCH. THE FIRST EIGHT DIP SWITCHES SET THESOUNDER BASE ADDRESS. DIP SWITCH POSITION 9 IS SET TO OFF OR ON DEPENDING UPON THE SOUNDER BASE POWERSOURCE. WHEN THE SOUNDER BASE IS CONNECTED TO A 24 VDC POWER SOURCE, DIP SWITCH POSITION 9 IS SET TO “OFF”AND THE 24 VDC POWER IS SUPERVISED BY THE SOUNDER BASE. WHEN THE SOUNDER BASE IS POWERED BY THE PANEL’SNOTIFICATION APPLIANCE CIRCUIT (NAC), DIP SWITCH POSITION 9 IS SET TO “ON” AND THE POWER IS SUPERVISED BY THENAC AND NOT THE SOUNDER BASE. THE 4098-9770 AND -9797 BASES HAVE THE SAME LAYOUT, BUT DOESN’T OFFERSOUNDER FUNCTIONALITY. THEY USE AN 8-WAY DIP SWITCH ONLY.SEENOTEDIPSWITCHES1 THRU 4DIP SWITCH SETTINGS - INITIATINGSIMPLEX IDNetCLASS B WIRINGWIRING NOTES(+)(-)(+)DUAL CONTACT RELAY IAMIDNet SLCMOUNTING OPTION "A"4090-9008 DUALCONTACT RELAYIAMCOVER PLATE-+CNONCCNONCCOMM-+CNONCCNONCCOMM(-)(+)OPTIONAL TAPLOCATION FORIDNet SLC1.MAINTAIN CORRECT POLARITY ON TERMINALCONNECTIONS.2.ALWAYS CUT CONDUCTORS AND SECURE UNDERTERMINALS. NEVER LOOP WIRES UNDERTERMINALS.3.ANY WIRE SPLICES TO BE MADE BY LISTED ANDAHJ APPROVED METHODS (CLASS B ONLY).1.FOR ADDITIONAL MOUNTING OPTIONS, DOWNLOAD DATA SHEET S4090-0014 FROM HTTP://WWW.SIMPLEX-FIRE.COMIDNet SLC(-)SERIESCONNECTIONTERMINATION VIEWT-TAP (SPLICE)CONNECTIONELECTRICAL BOXTO CONTROLLEDDEVICES. SEE DATASHEET FOR POWERRATINGLIMITATIONS.SIMPLEX 4090-9008MOUNTING OPTIONSOPTION 1DESCRIPTIONNOTEA4" (102mm) SQUARE BOX, 2-1/8" MINIMUM DEPTH WITH DOUBLE GANG COVER PLATE.BY OTHERSB4" (102mm) SQUARE BOX, 2-1/8" MINIMUM DEPTH WITH SIMPLEX 4090-9801 TRIMPLATE FOR SEMI-FLUSH MOUNTED BOXBOX BY OTHERS, PLATES ORDEREDSEPARATELYC4" (102mm) SQUARE BOX, 2-1/8" MINIMUM DEPTH WITH SIMPLEX 4090-9802 TRIMPLATE FOR SURFACE MOUNTED BOXBOX BY OTHERS, PLATES ORDEREDSEPARATELYCLASS B WIRING1.MAINTAIN CORRECT POLARITY ONTERMINAL CONNECTIONS.2.ALWAYS CUT CONDUCTORS AND SECUREUNDER TERMINALS. NEVER LOOP WIRESUNDER TERMINALS.3.ANY WIRE SPLICES TO BE MADE BY LISTEDAND AHJ APPROVED METHODS.WIRING NOTESIDNetSLC(-)(+)(-)(+)STANDARD SENSOR BASE(-)(+)OPTIONAL TAPLOCATIONFOR IDNet SLCT-TAP (SPLICE)CONNECTIONSERIESCONNECTIONIDNet SLCTERMINATION VIEW: DEVICE REARSENSOR3' (941mm)MIN.4" (102mm)CEILING MOUNTED SENSORHEAT SENSORS NEVER HERE12"(305mm)MAXIMUMTO TOP OFSENSORFINISHED WALLWALL MOUNTED SENSORMOUNTING OPTION "A"SIMPLEX 4098-97921.FOR ADDITIONAL MOUNTING OPTIONS, DOWNLOAD DATA SHEET 4098-0019 FROM HTTP://WWW.SIMPLEX-FIRE.COMMOUNTING OPTIONSOPTION 1DESCRIPTIONNOTEASINGLE GANG BOX, 2-1/8" (54mm) DEEP - FLUSH MOUNTBY OTHERSB4" (102mm) OCTAGONAL BOX, 1-1/2" (38mm) DEEP, MINIMUM - FLUSH MOUNTBY OTHERSC4" (102mm) SQUARE BOX, 1-1/2" DEEP (MIN) W/ SIMPLEX 4098-9832ADAPTER KITBOX BY OTHERS, 4098-9832 ORDEREDSEPARATELYD4" (102mm) SQUARE BOX, 1-1/2" DEEP (MIN)W/ SINGLE GANG COVER PLATE 3/4" (19mm) EXTENSIONBY OTHERSBASEELECTRICAL BOX#6-32 SCREWWITH WASHER(NOT SUPPLIED)#8-32 x 1-1/4" PANHEADMACHINE SCREW(TIGHTEN TO 4-6 in.-lbs.)MOUNTING OPTION "B" GROUND FLOOR - BALLROOMSGROUND FLOOR - BALLROOMSSM1-35(L2)1FL CORR #1 113 AOMM 1 - 1 2 5 ( L 2 ) 1 F L C O R R # 1 1 1 3 DH HOLDERS RFM1-37(L2)1FL CORR #1 113 SM 1 - 3 8 ( L 2 )1FL STORAGE SM1-39(L2)1FL SERVICE 115 SM 1 - 4 0 ( L 2 )1FL ELEV. LOBBY 106 SM1-41(L2)1FL ELEV. LOBBY SM 1 - 4 2 ( L 2 )1FL ELEV. LOBBY AIMM1-43(L2)B L D G B C D R I S E R I NKITCHEN WFZ6.8KAIMM 1 - 4 4 ( L 2 )BLDG B C D SPRNKLRV A L V E I N K I T C H N VSZ6.8KAIMM1-45(L2)FIESTA BALLROOMRISER IN KITCHEN AIMM 1 - 4 6 ( L 2 ) FI E S T A S P R N K L RVALVE RISER IN KITCS VSZ6.8KAIMM1-47(L2)FIESTA P.I.V.AUXILLARY BUILDINGSAIMM 1 - 4 8 ( L 2 )ALL STANDPIPE P.I.V.FM 1 - 4 9 ( L 2 )1FL ELEV. LOBBY SM 1 - 5 0 ( L 2 ) 1 F L F O Y E R # 1 1 0 4 SM1-51(L2)1FL FOYER #1 104 SM 1 - 5 2 ( L 2 ) 1 F L F O Y E R # 1 1 0 4 FM1-53(L2)1FL FOYER #2 101 SM 1 - 5 4 ( L 2 ) 1 F L F O Y E R # 2 1 0 1 SM1-55(L2)1FL FOYER #2 101 SM 1 - 5 6 ( L 2 ) 1 F L F O Y E R # 2 1 0 1 FM1-57(L2)1FL FOYER #2 101 SM 1 - 5 8 ( L 2 ) 1 F L F O Y E R # 3 1 0 1 SM1-59(L2)1FL FOYER #3 101 SM 1 - 6 0 ( L 2 ) 1 F L F O Y E R # 3 1 0 1 SM1-61(L2)1FL BANQUETSTORAGE 116 SM 1 - 6 2 ( L 2 )1FL MAIL 118 SM1-63(L2)1FL CORR #2 119 SM 1 - 6 4 ( L 2 ) 1 F L S T O R A G E 1 2 2 SM1-65(L2)1 F L S T O R A G E 1 2 2 FM 1 - 6 6 ( L 2 ) 1 F L S E R V I C E 1 1 5 SM1-67(L2)1FL SERVICE 115 SM 1 - 6 8 ( L 2 ) 1 F L S E R V I C E 1 1 5 SM1-69(L2)1FL BANQUETSTORAGE 116 SM1-70(L2)1FL BANQUETS T O R A G E 1 1 6 SM1-71(L2)1 F L S E R V I C E SM 1 - 7 2 ( L 2 ) 1 F L S E R V I C E 1 1 5 SM1-73(L2)1FL SERVICE 115 SM 1 - 7 4 ( L 2 ) 1 F L S T O R A G E SM1-75(L2)1FL FOYER #4 124 SM 1 - 7 6 ( L 2 )1FL FOYER #4 124 FM1-77(L2)1 F L F O Y E R # 4 1 2 4 SM 1 - 7 8 ( L 2 )1FL FOYER #4 124 SM1-79(L2)1FL ALCOVE 139SM 1 - 8 0 ( L 2 )1FL MENS SM1-81(L2)1FL WOMENS SM1-83(L2)1FL EXISTINGELECTRICAL SM 1 - 8 4 ( L 2 ) 1 F L C O R R . # 2 K - 0 5 AOMM1-85(L2)1FL ELEV. ROOMPRIMARY RECALL TO ELEV. INTERFASE RAOMM 1 - 8 6 ( L 2 )1FL ELEV. ROOMA L T E R N A T E R E C A L L AOMM1-87(L2)1FL ELEV. ROOMFIRE HAT FLASH SM 1 - 8 8 ( L 2 )1FL ELEV. ROOM SM1-89(L2)1FL ELEV. LOBBY K-12 FM 1 - 9 0 ( L 2 ) 1 F L C O R R B Y FI E S T A B A L L R O O M FM1-92(L2)1 F L F I E S T A B A L L R O O M FM1-93(L2)1FL FIESTABALLROOM FM 1 - 9 4 ( L 2 ) 1 F L F I E S T A B A L L R O O M FM1-95(L2)1FL FIESTABALLROOM FM 1 - 9 6 ( L 2 ) 1 F L F I E S T A B A L L R O O M FM1-97(L2)1FL FIESTABALLROOM FM 1 - 9 8 ( L 2 ) 1 F L F I E S T A B A L L R O O M FM1-99(L2)1FL FIESTABALLROOM FM 1 - 1 0 0 ( L 2 ) 1 F L F I E S T A B A L L R O O M FM1-101(L2)1FL FIESTABALLROOM FM 1 - 1 0 2 ( L 2 ) 1 F L F I E S T A B A L L R O O M FM1-103(L2)1FL FIESTABALLROOM FM1-104(L2)1FL FIESTAB A L L R O O M FM1-105(L2)1FL FIESTABALLROOM FM1-106(L2)1 F L F I E S T A B A L L R O O M FM1-107(L2)1FL FIESTABALLROOM FM 1 - 1 0 8 ( L 2 ) 1 F L F I E S T A B A L L R O O M FM1-109(L2)1FL FIESTABALLROOM FM 1 - 1 1 0 ( L 2 ) 1 F L F I E S T A B A L L R O O M FM1-111(L2)1FL FIESTABALLROOM FM1-112(L2)1FL FIESTAB A L L R O O M FM1-113(L2)1FL FIESTAB A L L R O O M FM1-114(L2)1 F L C O R R B Y FI E S T A B A L L R O O M FM1-115(L2)1FL FIESTABALLROOM FM1-116(L2)1 F L F I E S T A B A L L R O O M FM1-117(L2)1FL FIESTABALLROOM FM 1 - 1 1 8 ( L 2 ) 1 F L F I E S T A B A L L R O O M FM1-119(L2)1FL FIESTABALLROOM FM 1 - 1 2 0 ( L 2 ) 1 F L F I E S T A B A L L R O O M FM1-121(L2)1FL FIESTABALLROOM 15V2-1S2-1 .5W75V2-2S2-2.5W15V2-3S2-3 .5W15V2-4S2-4.5W75V2-5S2-5 .5W75V2-6S2-6.5W110V2-7S2-7 .5W110V2-8S2-8.5W75V2-9S2-9 .5W75V2-10S2-10.5W10KNAC - V2110V3-1S3-1.5W30V3-2S3-2 .5W15V3-3S3-3.5W15V3-4S3-4 .5W15V3-5S3-5.5W15V3-6S3-6 .5W75V3-7S3-7.5W15V3-8S3-8 .5W15V3-9S3-9.5W10KNAC - V315V4-1S4-1.5W75V4-2S4-2 .5W15V4-3S4-3.5W110V4-4S4-4.5W110V4-5S4-5 .5W15V4-6S4-6.5W15V4-7S4-7.5W10KNAC - V410KSpeak - S210KSpeak - S3UNDERGROUND PARKINGUNDERGROUND PARKINGFM 1 - 1 2 ( L 1 )UNDERGROUNDP A R K I N G B Y S / ESTAIR SM 1 - 1 7 ( L 1 )UNDERGROUNDP A R K I N G E L E VLOBBY AIMM 1 - 2 0 ( L 1 ) U N D E R G R O U N DPARKING WESTR I S E R WFZ6.8KAIMM1-21(L1)UNDERGROUNDPARKING WESTTAMPERVSZ6.8KFM 1 - 2 2 ( L 1 ) U N D E R G R O U N DPARKING BY N/WS T A I R FM 1 - 2 4 ( L 1 )UNDERGROUNDP A R K I N GNORTHWEST RAMP110V1-1S1-110KSpeak - S4IDNet - M1(L2)NAC - V2NAC - V3NAC - V4Speak - S1Speak - S2Speak - S3IDNet - M1(L1)NAC - V1Speak - S44100ESLOCATED INGROUND FLOORCORR #1 113NODE 1 FACP1TO TELEPHONEMOUNTING BOARD2 PAIR TELCORJ-31X JACKSUPPLIED BY ECLINE 114' RJ45 CABLE (2080-9047)SUPPLIED WITH PANELTO IDNETDEVICES INUNDERGROUNDPARKINGIMM1-1(L1)1FL CORR #1 113ISO TO UGLMIDNet - M1MMMMMNVSZ6.8KVSZ6.8KTO 4007ES FACPLOCATED INMARKET PLACENTO 4007ES FACPLOCATED INBUNGALOW CFROM ISO MODULEM1-1(L1)NEXT TO FACPTO ELEV. INTERFASE RTO ELEV. INTERFASE R4009NAC1M1-82(L2)LOCATED INEXISTING ELEC.1120 VOLT ACDEDICATEDCIRCUITMVSVSVSVSVSMDHDHDDoor Holder - DH1120 VOLT AC DEDICATEDCIRCUITDIALERAOMM 1 - 3 0 ( L 1 )UNDERGROUNDPARKING FLORES PARKING ELEVATOR PRIR AOMM1-31(L1)UNDERGROUNDP A R K I N G FLORES PARKING ELEVATOR ALTR SM 1 - 7 ( L 2 )1FL CONFERENCEA 126 SM1-8(L2)1 F L C O N F E R E N C E B 127 SM 1 - 9 ( L 2 )1FL CONFERENCE C 1 2 8 FM1-10(L2)1FL FOYER #4 124EXIT SM 1 - 3 2 ( L 2 )1FL OFFICE 137 FM1-33(L2)1FL FOYER #2 101EXIT SM 1 - 3 4 ( L 2 ) 1 F L F O Y E R # 3 1 0 1 FM 1 - 1 2 2 ( L 2 ) 1 F L F I E S T A B A L L R O O M SM1-131(L2)1FL FIESTA BALLROOMATTIC SM1-132(L2)1FL FIESTA BALLROOMATTIC SM 1 - 1 3 3 ( L 2 ) 1 F L F I E S T A B A L L R O O MATTIC SM1-134(L2)1FL FIESTA BALLROOMATTIC SM 1 - 1 3 5 ( L 2 ) 1 F L F I E S T A B A L L R O O MATTIC SM1-136(L2)1FL FIESTA BALLROOMATTIC SM 1 - 1 3 7 ( L 2 ) 1 F L F I E S T A B A L L R O O MATTIC SM1-138(L2)1FL FIESTA BALLROOMATTIC SM 1 - 1 3 9 ( L 2 ) 1 F L F I E S T A B A L L R O O MATTIC SM1-140(L2)1FL FIESTA BALLROOMATTIC SM 1 - 1 4 1 ( L 2 ) 1 F L F I E S T A B A L L R O O MATTIC SM1-142(L2)1FL FIESTA BALLROOMATTIC SM 1 - 1 4 3 ( L 2 )1FL FIESTA BALLROOMATTIC SM 1 - 1 4 4 ( L 2 )1FL FIESTA BALLROOMATTIC SM 1 - 1 4 5 ( L 2 )1FL FIESTA BALLROOMATTIC SM 1 - 1 4 6 ( L 2 )1FL FIESTA BALLROOMATTIC SM 1 - 1 4 7 ( L 2 )1FL FIESTA BALLROOMATTIC SM 1 - 1 4 8 ( L 2 )1FL FIESTA BALLROOMATTIC SM 1 - 1 4 9 ( L 2 )1FL FIESTA BALLROOMATTIC SM 1 - 1 5 0 ( L 2 )1FL FIESTA BALLROOMATTIC WFZ6.8KVSZ6.8K110V1-2S1-2110V1-3S1-3110V1-4S1-4110V1-5S1-5110V1-6S1-6110V1-7S1-7 PRR10KTO FANROOF FLOOR - BALLROOMSROOF FLOOR - BALLROOMSFROM ISO MODULENEXT TO FACPFROM FACPIDNet - M1(L3)PowerSRWPM 1 - 1 5 5 ( L 3 )RFL FLORES BALLRMSRTU#1 SUPPLYPRR10KTO FANS RWPM1-156(L3)R F L F L O R E S B A L L R M S R T U # 1 R E T U R N SRWPM 1 - 1 5 7 ( L 3 )RFL FLORES BALLRMSRTU#2 SUPPLYPRR10KTO FANS RWPM1-158(L3)R F L F L O R E S B A L L R M S R T U # 2 R E T U R N PRR10KTO FAN SRWPM 1 - 1 5 9 ( L 3 )RFL FLORES BALLRMSRTU#3 SUPPLYPRR10KTO FANS RWPM1-160(L3)R F L F L O R E S B A L L R M S R T U # 3 R E T U R N PRR10KTO FAN SRWPM 1 - 1 6 1 ( L 3 )RFL FLORES BALLRMSRTU#4 SUPPLYPRR10KTO FANS RWPM1-162(L3)R F L F L O R E S B A L L R M S R T U # 4 R E T U R N PRR10KTO FAN SRWPM 1 - 1 6 3 ( L 3 )RFL FLORES BALLRMSRTU#5 SUPPLYPRR10KTO FANS RWPM1-164(L3)R F L F L O R E S B A L L R M S R T U # 5 R E T U R N PRR10KTO FAN SRWPM 1 - 1 6 5 ( L 3 )RFL FLORES BALLRMSRTU#6 SUPPLYPRR10KTO FANS RWPM1-166(L3)R F L F L O R E S B A L L R M S R T U # 6 R E T U R N PRR10KTO FAN SRWPM 1 - 1 6 7 ( L 3 )RFL FLORES BALLRMSRTU#7 SUPPLYPRR10KTO FANS RWPM1-168(L3)R F L F L O R E S B A L L R M S R T U # 7 R E T U R N PRR10KTO FAN SRWPM 1 - 1 6 9 ( L 3 )RFL FLORES BALLRMSRTU#8 SUPPLYPRR10KTO FANS RWPM1-170(L3)R F L F L O R E S B A L L R M S R T U # 8 R E T U R N PRR10KTO FANSECOND FLOOR - BALLROOMSSECOND FLOOR - BALLROOMSSM1-126(L2)2FL ELEV LOBBY SM1-127(L2)2FL SALES HALLWAY SM1-128(L2)2 F L E V E N T O F F I C E SM1-129(L2)2FL EVENT HALL SM1-130(L2)1 F L H A L L M E C H A N I C A L 10KSpeak - S110KNAC - V1110V1-8S1-81101:SIG3-11101:SIG3-2 751:SIG3-31101:SIG3-4 1101:SIG3-51101:SIG3-6 1101:SIG3-71101:SIG3-8 10K1:SIG31:SIG3V1101:SIG4-1751:SIG4-2 1101:SIG4-3751:SIG4-4 751:SIG4-51101:SIG4-6 751:SIG4-71101:SIG4-8 10K1:SIG41:SIG4VAIMM1-27LAUNDRY BUILDING FM1-25LAUNDRY BUILDING M15V4-8S4-8.5W15V5-1 15V5-2V5-3 15V5-41510KNAC - V5WFZ6.8KLAUNDRY BUILDINGLAUNDRY BUILDINGAIMM 1 - 1 5 ( L 2 )FACILITY BLDG &C A S I T A S 6 0 0 - 9 0 0 VSZ6.8KAIMM1-16(L2)FLORES BLDG P.I.V.VSZ6.8KSM 1 - 2 6 ( L 2 )1FL FLORES ELEC RM INSIDES E C U R I T Y WFZ6.8KSM 1 - 1 1 ( L 1 )UNDERGROUNDPARKNG SECOMP.STORAGE SM1-14(L1)UNDERGROUNDPARKING S/E ELECCAGE SM1-18(L1)UNDERGROUNDPARKNG ELEVM A C H I N E R M AIMM1-44(L2)1FL GENERALSTORAGE 109 - VS AOMM 1 - ( L 1 )UNDERGROUNDPARKING FLORES PARKING FLASHING HATR AIMM 1 - 1 7 1 ( L 2 )1FL GENERALS T O R A G E 1 0 9 - W F M1-123(L1)1FL ELEV LOBBYAOMM1-151(L1)1FL ELEV. MECH. RM.P R I M A R Y R E C A L L TO ELEV. INTERFASE RAOMM1-152(L1)1 F L E L E V . M E C H . R M .ALTERNATE RECALL AOMM1-153(L1)1 F L E L E V . M E C H . R M .FIRE HAT FLASH TO ELEV. INTERFASE RTO ELEV. INTERFASE RSM1-154(L1)1FL ELEV. MECH RM.M1-124(L2)2FL ELEV LOBBYSHEET:DRAWN BY:CHECKED BY:JOB #:PROJECT #:DESCRIPTIONCADDATEMARKSYSTEM:CHKISSUE DATE:30" x 42" - Arch E1 Size ISSUE LOG:Revisions shown with # symbolSCALE:N.T.S.RISER DIAGRAMLAST PRINTED:LAST SAVED BY:FILE PATH:C:\Users\jjotom3\OneDrive - Johnson Controls\La Quinta Mountain_Dunes - Master\LaQuintaHiltonElev-650133048\Fire\FA-201.dwg8/14/2022 5:22:00 PM JJOTOM3 436:650133048MMLTLJ08/14/22FIRE ALARM SYSTEMLA QUINTA HILTON 49499 EISENHOWER DRIVE, LA QUINTA, CA 92253 9287 CHARLES SMITH AVE. RANCHO CUCAMONGA, CA 91730PHONE: 909-987-7546 SERVICE: 909-987-7546 FAX: 909-989-6718 DISTRICT - 436FA-201RISER DIAGRAMJOHNSON CONTROLS © 2022LA QUINTA HILTON ELEVATOR MOD.© Johnson Controls 2022. All rights reserved. Reuse, copying, modification or alteration of the drawings and other information contained herein is strictly prohibited.RISER NOTES:1.RISER IS A DIAGRAMMATICAL REPRESENTATION OF THESYSTEM ARCHITECTURE IN BUILDING CROSS SECTION. IT ISNOT INTENDED TO REPRESENT ACTUAL WIRE RUNS, PANELCONFIGURATIONS OR PENETRATIONS. REFER TO FLOORPLANS AND PANEL DETAILS FOR CIRCUIT ROUTING ANDCONFIGURATION INFORMATION.2.ALL WIRING SHALL COMPLY WITH APPLICABLE ELECTRICALCODES. REFER TO 'APPLICABLE CODES & STANDARDS' ONSHEET FA-001 FOR SPECIFIC CODE REFERENCES.SAOMFIRE ALARM SYMBOL LEGENDQTYSYMBOLDESCRIPTIONBRANDMODELBACKBOXWIRECSFM #TYPEINITIATING DEVICES1ADDRESSABLE PHOTOELECTRIC SMOKE SENSOR W/ STANDARDBASESIMPLEX4098-9714 HEAD4" OCT, 1-1/2" DM7272-0026:02184098-9792 BASE7300-0026:02172ADDRESSABLE STANDARD HEAT SENSOR W/ STANDARD BASESIMPLEX4098-9733 HEAD4" OCT, 1-1/2" DM7270-0026:02164098-9792 BASE7300-0026:0217MODULES AND RELAYS4DUAL RELAY IAMSIMPLEX4090-90084" SQ. 2-1/8" D W/ DBL. GANG COVERM7300-0026:0311RACCEPTABLECABLE TYPESFIRE ALARM WIRE LEGENDFPLR FPLP THHN TFFN OUTDOOR ** C.I.CIRCUIT DESCRIPTIONCONSTRUCTIONGAUGECIRCUIT PROPERTIESMIDNETUTP SOLID18 AWG0.60µF MAX TOTAL LINECAPACITANCEXXRRELAY2 COND. SOLID14 AWGXXXXCONDUIT SIZEMAX CONDUCTOR AREACONDUIT SIZEMAX CONDUCTOR AREA1/2"0.122 SQ. INCH*1-1/4"0.598 SQ INCH*3/4"0.213 SQ INCH*1-1/2"0.814 SQ INCH*1"0.346 SQ INCH*2"1.342 SQ INCH** 40% CONDUIT FILL PER N.E.C.STP = SHIELDED TWISTED PAIRITEMS SUCH AS CAPACITANCE BETWEEN CONDUCTORS AND WIRE GAUGE CAN BE CRUCIAL TO THE CIRCUIT DESIGN OF THIS SYSTEMINSTALLATION. THE INSTALLING CONTRACTOR IS RESPONSIBLE FOR SELECTING AND INSTALLING CABLE MANUFACTURER AND MODELTHAT MEETS OR EXCEEDS THE ABOVE REQUIREMENTS. RECOMMENDED CABLE MANUFACTURERS AND MODEL NUMBERS ARE AVAILABLEUPON REQUEST.AREA OF WORKAREA OF WORKAREA OF WORK FIRE ALARM SYSTEM PRODUCT SUBMITTAL LA QUINTA HILTON ELEVATOR MOD. 49499 EISENHOWER DRIVE LA QUINTA, CA 92253 Electrical Engineer's Stamp:OSHPD Approval Stamp: Submittal Prepared By: Johnson Controls Fire Protection, LP 9287 CHARLES SMITH RANCHO CUCAMONGA, CA 91730 PH: 909-987-7546 FX: 909-989-6718 Prepared By: TOMMY JOHNSON Date Prepared: 8/14/2022 FIRE ALARM SYSTEM PRODUCT SUBMITTAL LA QUINTA HILTON ELEVATOR MOD. 49499 EISENHOWER DRIVE LA QUINTA, CA 92253 Product ID Description Manufacture C.S.F.M. INITIATING DEVICES 4098-9714 TRUEALARM PHOTO SMOKE SENSOR SIMPLEX 7272-0026:0218 4098-9792 TRUE ALARM SENSOR BASE SIMPLEX 7300-0026:0217 4098-9733 TRUEALARM HEAT SENSOR SIMPLEX 7270-0026:0216 MISCELLANEOUS DEVICES 4090-9008 DUAL CONTACT RELAY IAM SIMPLEX 7300-0026:0311 Job Number:650133048 Prepared By:TOMMY JOHNSON Date:8/14/2022 TrueAlarm Analog Sensors – Photoelectric and Heat; Standard Bases and Accessories * These products have been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7272-0026:218, 7271-0026:231, 7270-0026:216, and 7300-0026:217 for allowable values and/or conditions concerning material presented in this document. Additional listings may be applicable, contact your local Simplex product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are the property of Tyco Fire Protection Products. Features TrueAlarm analog sensing provides: • Digital transmission of analog sensor values using IDNet or MAPNET II two-wire communications For use with the following Simplex products: • 4007ES, 4010, 4010ES, 4100ES, and 4100U Series control units; and 4008 Series control units with reduced feature set (refer to data sheet S4008-0001 for details) • 4020, 4100, and 4120 Series control units, Universal Transponders, and 2120 TrueAlarm CDTs equipped for MAPNET II operation Fire alarm control unit provides: • Peak value logging allowing accurate analysis of each sensor for individual sensitivity selection • Sensitivity monitoring satisfying NFPA 72 sensitivity testing requirements; automatic individual sensor calibration check verifies sensor integrity • Automatic environmental compensation, multi-stage alarm operation, and display of sensitivity directly in percent per foot • Ability to display and print detailed sensor information in plain English language Photoelectric smoke sensors provide: • Sensitivity levels from 0.2% to 3.1%. See TrueAlarm sensors for more information. Heat sensors provide: • Three fixed temperature sensing thresholds: 135°F, 155°F and 190°F • Rate-of-rise temperature sensing • Utility temperature sensing • Listed to UL 521 and ULC-S530 General features: • Operation is for ceiling or wall mounting • Listed to UL 268 7th Edition and ULC-S529 • NEMA 1 rated. See TrueAlarm analog sensing product selection chart for more information. • Louvered smoke sensor design enhances smoke capture by directing flow to chamber; entrance areas are minimally visible when ceiling mounted • Designed for EMI compatibility • Magnetic test feature is provided • Different bases are available to support a supervised or unsupervised output relay, and/or a remote LED alarm indicator Additional base reference: • For isolator bases, refer to data sheet S4098-0025 • For sounder bases, refer to data sheet S4098-0028 • For photo/heat sensors, refer to data sheet S4098-0024 (single address) and S4098-0033 (dual address) Description Digital communication of analog sensing TrueAlarm analog sensors provide an analog measurement digitally communicated to the host control panel using Simplex addressable communications. At the control unit, the data is analyzed and an average value is determined and stored. An alarm or other abnormal condition is determined by comparing the sensor's present value against its average value and time. Intelligent data evaluation Monitoring each sensor's average value provides a continuously shifting reference point. This software filtering process compensates for environmental factors, such as dust and dirt, and component aging, providing an accurate reference for evaluating new activity. With this filtering, there is a significant reduction in the probability of false or nuisance alarms caused by shifts in sensitivity, either up or down. Control unit selection Peak activity for each sensor is stored to assist in evaluating specific locations. The alarm set point for each TrueAlarm sensor is determined at the host control unit, selectable as more or less sensitive as the individual application requires. Figure 1: 4098-9714 TrueAlarm photoelectric sensor mounted in base Timed/multi-stage selection You can program sensor alarm set points for timed automatic sensitivity selection, such as more sensitive at night, less sensitive during day. Control unit programming can also provide multi-stage operation per sensor. Sensor alarm and trouble LED indication Each sensor base's LED pulses to indicate communications with the unit. If the control unit determines a sensor is in alarm, or is dirty or has some other type of trouble, the details are annunciated at the control unit and that sensor base's LED will be turned on steadily. During a system alarm, the control unit will control the LEDs such that an LED indicating a trouble will return to pulsing to help identify the alarmed sensors. TrueAlarm sensor bases and accessories Sensor base features Base mounted address selection: • Address remains with its programmed location • Accessible from front, DIP switch under sensor General features: • Automatic identification provides default sensitivity when substituting sensor types • Integral red LED for power-on (pulsing), or alarm or trouble (steady on) • Locking anti-tamper design mounts on standard outlet box • Magnetically operated functional test UL, ULC, CSFM Listed;FM Approved* TrueAlarm Analog Sensing S4098-0019 Rev. 26 7/2021 Datasheet Sensor bases 4098-9792, standard sensor base 4098-9789, sensor base with wired connections for: • 2098-9808 remote LED alarm indicator or 4098-9822 relay (relay is unsupervised and requires separate 24 VDC) Supervised relay bases (not compatible with 2120 CDT): •4098-9791, 4-wire sensor base, use with remote or locally mounted 2098-9737 relay, requires separate 24 VDC •4098-9780, 2-wire sensor base, use with remote or locally mounted 4098-9860 relay, no separate power required • Supervised relay operation is programmable and can be manually operated from control unit • Includes wired connections for remote LED alarm indicator or 4098-9822 relay (relay is unsupervised and requires separate 24 VDC) Sensor base options 2098-9737, remote or local mount supervised relay: • DPDT contacts for resistive/suppressed loads, power limited rating of 3 A at 28 VDC; non-power limited rating of 3 A at 120 VAC (requires external 24 VDC coil power) 4098-9860, remote or local mount supervised relay: • SPDT dry contacts, power limited rating of 2 A at 30 VDC, resistive; non- power limited rating of 0.5 A at 125 VAC, resistive 4098-9822, LED annunciation relay: • Activates when base LED is on steady, indicating local alarm or trouble • DPDT contacts for resistive/suppressed loads, power limited rating of 2 A at 28 VDC; non-power limited rating of 1/2 A at 120 VAC, (requires external 24 VDC coil power) 4098-9832, adapter plate: • Required for surface or semi-flush mounting to 4 in. square electrical box and for surface mounting to 4 in. octagonal box • Can be used for cosmetic retrofitting to existing 6 3/8 in. diameter base product 2098-9808, remote red LED alarm indicator: • Mounts on single gang box (shown in illustration) Figure 2: Remote red LED alarm indicator Description TrueAlarm sensor bases contain integral addressable electronics that constantly monitor the status of the detachable photoelectric or heat sensors. Each sensor's output is digitized and transmitted to the system fire alarm control unit every four seconds. Since TrueAlarm sensors use the same base, you can easily interchange different sensor types to meet specific location requirements. This feature also allows intentional sensor substitution during building construction. When conditions are temporarily dusty, instead of covering the smoke sensors causing them to be disabled, you can install the heat sensors without reprogramming the control unit. Although the control unit will indicate an incorrect sensor type, the heat sensor will operate at a default sensitivity providing heat detection for building protection at that location. Mounting reference Figure 3: Mounting reference Table 1: Product mounting - SKU reference Product SKU Relay 4098-9822 Supervised relay 1. 2098-9739 2. 4098-9860 Adapter plate 4098-9832 TrueAlarm bases 4098-9780, 4098-9789, 4098-9791, 4098-9792 TrueAlarm Analog Sensors – Photoelectric and Heat; Standard Bases and Accessories Page 2 S4098-0019 Rev. 26 7/2021 TrueAlarm sensors Features • Sealed against rear air flow entry • Interchangeable mounting • EMI/RFI shielded electronics • Heat sensors: - Selectable rate compensated, fixed temperature sensing with or without rate-of-rise operation - Rated spacing distance between sensors: Fixed Temp. Setting UL & ULC Spacing FM Spacing, Either Fixed Temperature Setting 135°F (57.2°C) 190°F (88°C)* 60 ft x 60 ft (18.3 m) 155°F (68°C)40 ft x 40 ft (12.2 m) 20 ft x 20 ft (6.1 m) for fixed temperature only; RTI = Quick 50 ft x 50 ft (15.2 m) for fixed temperature with either rate-of-rise selection; RTI = Ultra Fast Note: *190°F (88°C) ratings apply only to the 4098-9734 sensor. Smoke sensors: • Photoelectric technology sensing • 360° smoke entry for optimum response • Built-in insect screens 4098-9714 photoelectric sensor TrueAlarm photoelectric sensors use a stable, pulsed LED light source and a silicon photodiode receiver to deliver consistent and accurate low power smoke sensing. Three user selectable sensitivities for special applications are available for each individual sensor, 0.2%, 0.5%, and 1% per foot. Standard sensitivity is 1.25% to 3.1% per foot. The fire alarm control unit runs an algorithm that can vary the sensitivity for normal applications between 1.25% and 3.1% per foot. Note: Fixed sensitivity settings higher than 1.0% per foot are not UL268 7th Edition compliant. The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow. Figure 4: 4098-9714 photoelectric sensor with base 4098-9733 and 4098-9734 heat sensors TrueAlarm heat sensors are self-restoring and provide rate compensated, fixed temperature sensing, selectable with or without rate-of-rise temperature sensing. Due to its small thermal mass, the sensor accurately and quickly measures the local temperature for analysis at the fire alarm control unit. Rate-of-rise temperature detection is selectable at the control unit for either 15°F (8.3°C) or 20°F (11.1°C) per minute. Fixed temperature sensing is independent of rate-of-rise sensing and programmable to operate at 135°F (57.2°C) or 155°F (68°C). The 4098-9734 sensor provides an additional 190°F (88°C) set point. In a slow developing fire, the temperature may not increase rapidly enough to operate the rate-of-rise feature. However, an alarm will be initiated when the temperature reaches its rated fixed temperature setting. TrueAlarm heat sensors can be programmed as a utility device to monitor for temperature extremes in the range from 32°F to 155°F (0°C to 68°C). This feature can provide freeze warnings or alert to HVAC system problems. Refer to specific panels for availability. Figure 5: 4098-9733 heat sensor with base Figure 6: 4098-9734 high temperature heat sensor with base WARNING: In most fires, hazardous levels of smoke and toxic gas can build up before a heat detection device would initiate an alarm. In cases where Life Safety is a factor, the use of smoke detection is highly recommended. Application reference Sensor locations should be determined only after careful consideration of the physical layout and contents of the area to be protected. Refer to NFPA 72, the National Fire Alarm and Signaling Code. On smooth ceilings, smoke sensor spacing of 30 ft (9.1 m) may be used as a guide. For detailed application information including sensitivity selection, refer to Installation Instructions 574-709. TrueAlarm Analog Sensors – Photoelectric and Heat; Standard Bases and Accessories Page 3 S4098-0019 Rev. 26 7/2021 TrueAlarm analog sensing product selection chart Table 2: TrueAlarm sensor bases (for use with sensors 4098-9714 and 4098-9733) SKU Color Description Compatibility Mounting requirements 4098-9792 White 4098-9776 Black Standard sensor base No options 4 in. octagonal or 4 in. square box, 1 1/2 in. min. depth; or single gang box, 2 in. min. depth 4098-9789 White 4098-9789 4098-9789IND 4098-9789IND White 4098-9775 Black Sensor base with connections for remote LED alarm indicator or unsupervised relay 2098-9808 remote alarm indicator or 4098-9822 unsupervised relay 2098-9737 supervised remote relay 4098-9791 **White 4-wire sensor Supervised relay base with connections for LED indicator or unsupervised relay 2098-9808 remote alarm indicator or 4098-9822 unsupervised relay 4098-9860 supervised remote relay 4098-9780**White 2-wire sensor supervised relay base with connections for LED Indicator or unsupervised relay 2098-9808 remote alarm indicator or 4098-9822 unsupervised relay 4 in. octagonal or 4 in. square box Note: Box depth requirements depend on total wire count and wire size, refer to accessories list below for reference. ** 4098-9791 and 4098-9780 are NOT compatible with the 2120 CDT Note: * SKU numbers ending in IND are assembled in India. Refer to Application Manual 574-709 and Installation Instructions 574-707 for additional information. Table 3: TrueAlarm sensors SKU Color Description Compatibility Mounting requirements 4098-9714 1 4098-9714 IND 1 White 4098-9774 1 Black Photoelectric smoke sensor 4098-9733 1 White 4098-9778 1 Black Heat sensor 4098-9734 1 White High temperature heat sensor Bases 4098-9775, 4098-9776, 4098-9792, 4098-9789, 4098-9791, and 4098-9780 Refer to base requirements 1NEMA 1 rated. Table 4: TrueAlarm sensor/base accessories SKU Description Compatibility Mounting requirements 2098-9737 Supervised relay, mounts remote or in base electrical box For use with 4098-9791 base 4098-9860 Supervised relay, mounts remote or in base electrical box For use with 4098-9780 base Remote mounting requires 4 in. octagonal or 4 in. square box, 1 1/2 in. minimum depth Base mounting requires 4 in. octagonal box, 2 1/8 in. deep with 1 1/2 in. extension ring 2098-9808 1 Remote red LED alarm indicator on single gang stainless steel plate Bases 4098-9789, 4098-9791, and 4098-9780 Single gang box, 1 1/2 in. minimum depth 4098-9822 Unsupervised relay, tracks base led status. Note: Mounts only in base electrical box. Bases 4098-9789, 4098-9791, and 4098-9780 4 in. octagonal box, 2 1/8 in. deep with 1 1/2 in. extension ring 4098-9832 Adapter plate Bases 4098-9792, 4098-9789, 4098-9791, and 4098-9780 Required for surface or semi-flush mounted 4 in. square box and for surface mounted 4 in. octagonal box 1 NEMA 1 rated. Specifications Table 5: General operating specifications Specification Rating Communications and sensor supervisory power IDNet or MAPNET II communications, auto-selected, 1 address for each base Communications connections Screw terminals for in/out wiring, 18 to 14 AWG (0.82 mm2 to 2.08 mm2) Remote LED alarm indicator current 1 mA typical, no impact to alarm current Remote LED alarm indicator and relay connections Color coded wire leads, 18 AWG (0.82 mm2 ) UL listed operating temperature range 32°F to 100°F (0°C to 38°C) Page 4 S4098-0019 Rev. 26 7/2021 TrueAlarm Analog Sensors – Photoelectric and Heat; Standard Bases and Accessories Table 5: General operating specifications Specification Rating with 4098-9733 Heat Sensor 32°F to 122°F (0°C to 50°C) with 4098-9714 Smoke Sensor 15°F to 122°F (-9°C to 50°C)Operating temperature range with 4098-9734 Heat Sensor 32°F to 150°F (0°C to 66°C) Storage temperature range 0°F to 140°F (-18°C to 60°C) Humidity range 10% to 95% RH 4098-9714 smoke sensor air velocity rating 0 to 4000 ft/min (0-1220 m/min) Housing color Frost white or black Table 6: 4098-9791 Base with supervised remote relay 2098-9737 Specification Rating Externally supplied relay coil voltage 18 VDC to 32 VDC (nominal 24 VDC) Supervisory current 270 μA, from 24 VDC supply Alarm current with 2098-9737 relay 28 mA, from 24 VDC supply Note: See Sensor base options for contact ratings. Table 7: 4098-9780 Base with supervised remote relay 4098-9860 Specification Rating Power Supplied from communications Table 8: 4098-9822 Unsupervised relay, requirements for bases 4098-9789, 4098-9791, and 4098-9780 Specification Rating Externally supplied relay coil voltage 18 VDC to 32 VDC (nominal 24 VDC) Supervisory current Supplied from communications Alarm current 13 mA from separate 24 VDC supply Note: See Sensor base options for contact ratings. Page 5 S4098-0019 Rev. 26 7/2021 TrueAlarm Analog Sensors – Photoelectric and Heat; Standard Bases and Accessories S4098-0019 Rev. 26 7/2021 © 2021 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision and are subject to change without notice. Additional listings may be applicable, contact your local Simplex® product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. Simplex, and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited. NFPA 72 and National Fire Alarm Code are registered trademarks of the National Fire Protection Association (NFPA). TrueAlarm Analog Sensors – Photoelectric and Heat; Standard Bases and Accessories CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7272-0026:0218 Page 1 of 1 CATEGORY: 7272 -- SMOKE DETECTOR-SYSTEM TYPE-PHOTOELECTRIC LISTEE:Simplex6 Technology Park Drive, Westford, MA 01886 Contact: Jim Goyette (978) 577-4074 Fax (978) 731-8881 Email: james.goyette@jci.com DESIGN: Models 4098-9714, -9774, -9714TSP, -9714TTP, -9754, -9754TSP, -9754TTP; GSA4098-9714, and -9754 analog photoelectric type smoke detectors. *Models 4098-9764, 4098-9764BA, and 4098-9764BK Multi-criteria Smoke/Heat Detectors. Models 4098-9754, -9779, -9754TSP, -9754TTP; GSA4098-9754; *4098-9764, *4098-9764BA, and *4098-9764BK analog photoelectric type smoke detectors employ an integral supplemental heat sensor (135°F fixed temperature and 20°F rate of rise). This heat sensor is intended for use as a supplemental device to the smoke detector and is not intended for use in lieu of required heat detectors. Refer to listee's printed data sheet for additional detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as photoelectric smoke detectors for use with listee’s separately listed compatible fire alarm control units. Units are intended for use with smoke detector bases Models 4098-9789, -9789TSP, -9789TTP, -9791, -9791TSP, -9775, -9776, -9777, -9791TTP, -9792, -9792TSP, 9792TTP, -9793, 9793TSP, -9793TTP; GSA4098-9792, and -9793 (CSFM Listing No. 7300-0026:0217); 4098--9794, -9794TSP, -9794TTP (CSFM Listing No. 7300-0026:0500). Models 4098-9714, -9714TSP and -9714TTP are listed for use with Models 4098-9750, -9751, -9752 and -9753 duct detector units (CSFM Listing No. 3240-0026:0220) and Models 4098-9755, -9755TSP and -9755TTP duct detector units (CSFM Listing No. 3240-0026:0241). Model 4098-9714 with Model 4098-9751 is suitable for installations inside air ducts with air velocities between 0-2000 fpm. Refer to listee’s Installation Instruction Manual for details. NOTE: The photoelectric type detectors are generally more effective at detecting slow, smoldering fires which smolder for hours before bursting into flames. Sources of these fires may include cigarettes burning in couches or bedding. The ionization type detectors are generally more effective at detecting fast, flaming fires that consume combustible materials rapidly and spread quickly. Sources of these fires may include paper burning in a waste container or a grease fire in the kitchen. *Revision 10-20-20 VWW July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7300-0026:0217 Page 1 of 2 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE:Simplex6 Technology Park Drive, Westford, MA 01886 Contact: Jim Goyette (978) 577-4074 Fax (978) 731-8881 Email: james.goyette@jci.com DESIGN: Models *4098-9766, *-9767, *-9767BA, *-9767E, -9775, -9776, -9777, -9780, -9780E, -9789, -9789E, -9789TSP, -9789TTP, -9791, -9791E, -9791TSP, -9791TTP, -9792, -9792E, -9792TSP, -9792TTP, -9793, -9793E, -9793TSP, -9793TTP, -9796, -9796TSP, -9796TTP; GSA4098-9780, -9792, -9793, and -9796 smoke detector bases. These bases act as an interface between the sensor and the MAPNET controller. Refer to listee’s printed data sheet for additional detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as detector bases for use with listee's separately listed compatible fire alarm control units. Models *4098-9766, *-9767, *-9767BA, *-9767E, -9775, -9776, -9777, -9780, -9780E, -9789, -9789E, -9789TSP, -9789TTP, -9791, -9791E, -9791TSP, -9791TTP, -9792, -9792E, -9792TSP, -9792TTP, -9793, -9793E, -9793TSP, -9793TTP; GSA4098-9780, -9792, and -9793 are intended for use with: Models 4098-9714, *-9774, and GSA4098-9714 photoelectric smoke detectors (CSFM Listing No. 7272-0026:0218); Model 4098-9717 ionization smoke detector (CSFM Listing No. 7271-0026:0231); and Models 4098-9733, -9734, *-9778 and GSA4098-9733, -9734 heat detectors (CSFM Listing No. 7270-0026:0216). Models 4098-9796, -9796TSP, -9796TTP, GSA4098-9796 are only intended for use with Models 4098-9754 or GSA4098-9754 photoelectric smoke detector (CSFM Listing No.7272-0026:0218). These base/sounders CAN NOT produce the temporal code pattern in accordance with NFPA 72, 2002 Edition. If this temporal code is required, the sounder/base unit must be used with the control unit that can produce the temporal pattern. Refer to listee’s Installation *Revision 8-12-21 VWW July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator Listing No. Page 2 of 2 7300-0026:0217 Instruction Manual for details. *Revision 8-12-21 VWW July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7270-0026:0216 Page 1 of 1 CATEGORY: 7270 -- HEAT DETECTOR LISTEE:Simplex6 Technology Park Drive, Westford, MA 01886 Contact: Jim Goyette (978) 577-4074 Fax (978) 731-8881 Email: james.goyette@jci.com DESIGN: Models 4098-9733, 4098-9733E, 4098-9734, 4098-9734E, *4098-9778, GSA4098-9733 or GSA4098-9734 electric combination rate compensated, fixed temperature, and rate of rise heat detectors. Intended for use with listee's separately listed compatible detector bases. Refer to listee's printed data sheet for additional detailed product description and operational considerations. RATING:135°F and 155°F all models. 190°F (-9734 models only) INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical/temperature ratings and UL label. APPROVAL: Listed as a heat detector for use with listee’s separately listed compatible fire alarm control units. Refer to listee’s Installation Instruction Manual for details. *Revision 12-13-2016 dc July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator Features Dual Contact Relay IAM (Individual Addressable Module): A single addressable point provides control and status tracking of two, 2 A Form “C” contacts Low power latching relay design allows IDNet or MAPNET II communications to supply both data and module power Relay is set to OFF on initial power up and upon loss of IDNet or MAPNET II communications For use with following Simplex control panels: Model Series 4007ES, 4010ES, 4100ES, and 4100U fire alarm control panels for IDNet communications Model Series 4100/4100U/4100ES, 4120, 4020, and 2120 Communicating Device Transponders (CDTs) equipped with MAPNET II communications Compact construction: Mounts in standard 4” (102 mm) square electrical box, optional adapter bracket is available to mount in a 4 11⁄16” square electrical box Screw terminals for wiring connections Visible LED flashes to indicate communications, can be selected at panel to indicate activated state Optional 4” square box covers are available to allow LED to be viewed after installation UL listed to Standard 864 Description Dual Contact Relay IAMs allow fire alarm control panels to control two remotely located Form “C” contact using IDNet or MAPNET II addressable communications for both data and module power. Typical applications would be for switching local power for control functions such as elevator capture, or control of HVAC components, pressurization fans, dampers, etc. Relay status is also communicated requiring only one device address. Product Selection Model Description 4090-9008 Dual Contact Relay IAM Optional Adapter Plates Model Description 4090-9813 Adapter plate to fit 4 11⁄16” (119 mm) square electrical box 4090-9801 For semi-flush mounted box Optional trim plate for 4” boxes with LED viewing window, includes mounting screws; galvanized steel 4090-9802 For surface mounted box * This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7300-0026:0311 for allowable values and/or conditions concerning material presented in this document. Additional listings may be applicable; contact your local Simplex product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are the property of Tyco Fire Protection Products. 1 2 4 8 16 32 64 128 4090-9008 Dual Contact Relay IAM (shown approximately 1/2 size) Specifications Communications IDNet or MAPNET II communications, 1 address per device Power Supplied by communications Installation Instructions 579-1040 IDNet Firmware Requires 3.12.04 or higher Contact Ratings* (not rated for incandescent switching) Type Dual Form C contacts (DPDT) with terminal block access to Common, N.O., and N.C for each contact Power-Limited 2 A @ 30 VDC, resistive from listed fire alarm supply 1 A @ 30 VDC, inductive Nonpower-Limited 0.5 A @ 125 VAC, resistive Relay Fusing Each contact common is fused with a 2 A fast acting non-time delay fuse * Provide external transient suppression as required per application. DC inductive loads can typically be diode suppressed; 120 VAC loads may require RC networks or varistors, depending on device type. Refer to Installation Instructions for additional information. Wire Connections Screw terminals for in/out wiring, 18 to 14 AWG wire (0.82 to 2.08 mm2) IDNet or MAPNET II Communications Wiring Reference Up to 2500 ft ( 762 m) from control panel Up to 10,000 ft ( 3048 m) total wiring distance (including T-Taps) Compatible with Simplex 2081-9044 Overvoltage Protectors Dimensions 4 ⅛” H x 4” W x 1 ⅜” D (105 mm x 102 mm x 35 mm) Mounting Plate Sheet metal, galvanized Temperature Range 32° to 120° F (0° to 49° C), intended for indoor operation Humidity Range Up to 93% RH at 100° F (38° C) Addressable Initiation Peripherals UL, ULC, CSFM Listed; IDNet and MAPNET II Communicating Devices FM Approved* Model 4090-9008 Dual Contact Relay IAM S4090-0014-3 11/2014 Optional Trim Plates for 4" Square Boxes with Visible LED 4090-9802, Trim plate for surface mounted box 4090-9801, Trim plate for semi-flush mounted box 4-9/16" (116 mm) 4-9/16" (116 mm) 4-5/16" (109 mm) Light pipe for LED viewing 4-5/16" (109 mm) Mounting Reference with 4-11/16" Square and 4" Square Boxes 4090-9008 Dual Contact Relay IAM Assembly 4090-9813 Adapter Plate for 4-11/16" square box (includes 2, #8 mounting screws) 4-11/16" (119 mm) square electrical box, 2-1/8" (54 mm) minimum depth (supplied separately) 4" (102 mm) square electrical box, 2-1/8" (54 mm) minimum depth (supplied separately) 4-11/16" or 4" square cover plate (supplied separately) Use mounting screws supplied with box Add supplied label to cover on-site if controlling 120 VAC Tyco Fire Protection Products • Westminster, MA • 01441-0001 • USA S4090-0014-3 11/2014 www.simplex-fire.com © 2014 Tyco Fire Protection Products. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice. TYCO, SIMPLEX, and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited. Dual Contact Relay IAM Mounting Information CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7300-0026:0311 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE:Simplex6 Technology Park Drive, Westford, MA 01886 Contact: Jim Goyette (978) 577-4074 Fax (978) 731-8881 Email: james.goyette@jci.com DESIGN: Models 4090-9118 relay IAM (individually addressable module) module, 4090-9119 relay IAM module with unsupervised feedback, 4090-9008 dual relay IAM, *4090-9010 eight amp relay IAM and 4090-9120 six-point I/O module. (IAM). Refer to listee's data sheet for detailed product description and operational considerations. RATING:30 VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating and UL label. APPROVAL: Listed as control unit accessories for use with listee's separately listed compatible fire alarm control units. Refer to listee’s Installation Instruction Manual for details. *Rev. 04-24-13 gt July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator OFFICE OF THE FIRE MARSHAL – LA QUINTA 78495 Calle Tampico, La Quinta, CA 92253 • Phone (760) 777-7074 • www.rvcfire.org October 5, 2022 Johnson Controls 12728 Shoemaker Ave Santa Fe Springs, CA 90670 Re: Fire Alarm System Plan Review – LA QUINTA RESORT – ELEVATOR MONITORING FA2022-0011 – 49499 EISENHOWER DRIVE, LA QUINTA, CA 92253 The fire alarm system plans you submitted for the above referenced project have been reviewed by Riverside County Fire Department - Office of the Fire Marshal personnel and are approved with the following conditions. 1. For Central Station monitoring service, provide written documentation, at the time of acceptance testing, that there is a contract to provide the runner and maintenance services as required per NFPA 72. 2. The Office of the Fire Marshal staff shall witness the following inspections/tests: a) Rough-Wire Inspection – all wire not in conduit is exposed for inspection. b) Function Test - The alarm installer shall provide all needed testing equipment to complete the final alarm inspection. c) Final Acceptance Testing and Certification 3. Provide a completed NFPA 72 Record of Completion that the system has been installed in accordance with the approved plans and specifications as required. 4. Operating, testing, and maintenance instructions, record drawings (“as builds”), site-specific software and equipment specifications shall be provided in a documentation cabinet in compliance with NFPA 72 Section 7.7.2 5. Existing (Non-finaled) Fire Alarm Permits shall be inspected and finaled out as condition of this permit: a. FA2020-0003 – Replace Existing FACP – Campus System (JCI Job: 436:616101001) i. Last function test and 24-hour battery inspections failed (1/13/2021) ii. *Permit requires extension letter request. b. FA2019-0012 – Sub-FACP – Marketplace TI (JCI Job: 434:615168901) i. *Permit requires extension letter request. c. FA2019-0013 – Sub-FACP – Meeting Rooms TI (JCI Job: 434:615174701) i. *Permit requires extension letter request. The Fire Department approved plans and conditions letter must be at the job site. Applicant/installer shall be responsible to contact the Fire Department to schedule inspections. Requests for inspections are to be made at least 48 hours in advance and may be arranged by calling (760)777-7131. All questions regarding the meaning of these conditions should be referred to the Office of the Fire Marshal staff at (760)777-7074. Kohl Hetrick - Fire Safety Specialist 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 RIVERSIDE COUNTY FIRE PROTECTION PLANNING RECORD OF INSPECTIONS / PERMIT CARD THIS CARD IS TO REMAIN ON SITE AT ALL TIMES. INSTALLING CONTRACTOR MUST BE PRESENT FOR ALL INSPECTIONS. SEE NOTES ON REVERSE SIDE. JOB ADDRESS: PERMIT#: DATE ISSUED: DESCRIPTION: CONTRACTOR: HYDRANT SYSTEM DATE INITIALS SPECIAL SUPPRESSION DATE INITIALS Thrust block pre-pour Door fan test UG rough piping Abort test UG hydro Mechanical shutdown Flush Detector test Final E F Deluge/pre-action SPRINKLER U.G. Final E F Thrust block pre-pour UST/AST TANK UG rough piping Installation UG hydro Removal Flush Emergency shut off Final E F Primary piping FIRE SPRINKLER Secondary piping Weld inspection Dispensers & shear valves Overhead rough piping Final E F Overhead hydro MISC. INSPECTIONS UG flush / OK to connect Spray booths Main drain/inspectors’ test Hood/duct extinguishing High pile storage High pile rack storage In-rack sprinklers H.P. vents/access/corridors Hose racks Tract access/hydrant verification Final E F Access & Address verification HOOD EXTINGUISHING OTHER CONST. PERMIT Detection system Function test Gas/electrical shut-off Nozzle model/placement Fire alarm connection Final E F SPRAY BOOTHS FIRE CODE PERMIT(S) Installation Air flow test Mechanical interlock Extinguishing system Fire alarm connection Final E F FIRE ALARM KNOX SYSTEM Rough-wire inspection Building Knox box Function test Gate access Knox box/padlock Duct detectors/velocity BUILDING INSPECTIONS 24 hr. battery test T/I final Sprinkler monitoring Shell final Final E F Final for occupancy FINAL INSPECTION DATE: INSPECTORS SIGNATURE: **WHEN CALLING FOR AN INSPECTION PLEASE HAVE PERMIT NUMBER READY. SEE NOTES ON REVERSE SIDE** 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 INSPECTION NOTES 1. Sway bracing and hangers will be inspected at the time of rough piping inspection. 2. All required hydrostatic pressure tests shall maintain 200 psi for a 2-hour duration. (EX: Residential Fire Sprinkler Systems) 3. Fire sprinkler system remodels: if indicated on plans or this card, a hydrostatic pressure test shall be required. 4. All underground joints and thrusts blocks shall be exposed and readily visible during the hydrostatic test. 5. Contractor shall supply all testing equipment, access and operating instructions at time of test. 6. All systems shall be inspected, tested, and approved by a Fire Inspector before any work is started that may cause the affected system to be covered or hidden. POLICIES ON FIELD INSPECTIONS A. INSPECTION REQUESTS: Inspections are made subject to availability. Please have the permit number available when scheduling inspections. For City of La Quinta inspections call: (760) 777-7131. B. APPROVED PLANS: Shall be kept on the job site at all times that work is in progress. Work shall NOT commence without approved plans. C. INSPECTION REQUESTS: As required by the California Fire Code, the appropriate installing contractor shall be required to schedule the necessary inspections and be present on site for inspections. D. RE-INSPECTIONS: Will be charged against a permit when an inspection has failed, is not ready, the responsible party not on site or where previously noted corrections have not been completed. E. COMMODITIES: Unless otherwise noted on approved plans or letter of conditions, no commodities shall be entered into the structure until clearance has been granted by the Fire Dept and Building Official. F. OCCUPANCY: Buildings shall NOT be occupied by persons other than construction workers until a Final Fire Clearance has been granted by the Fire Dept and a Certificate for Occupancy has been issued by the Building Official. INSPECTION NOTES: THIS CARD IS REQURIED TO BE POSTED AT THE CONSTRUCTION SITE. THIS CARD AND APPROVED PLANS MUST BE AVAILABLE AT THE CONSTRUCTION SITE FOR ALL INSPECTIONS. THIS PERMIT SHALL EXPIRE AND BECOME NULL AND VOID IF THE WORK AUTHORIZED IS NOT COMMENCED WITHIN 180 DAYS OR IF THE WORK IS SUSPENDED OR ABANDONED FOR A PERIOD OF 180 DAYS OR MORE. THIS PERMIT IS FOR FIRE DEPARTMENT APPROVAL ONLY AND DOES NOT INTEND TO ABROGATE MORE RESTRICTIVE REQUIREMENTS OF OTHER AGENCIES HAVING RESPONSIBILITY.