The URL can be used to link to this page

FA2022-0008ADDITIONAL SITES CHRONOLOGY CONTACTS NAME TYPE NAME ADDRESS1 CITY STATE ZIP PHONE FAX EMAIL APPLICANT Kraig Heminger 16651 Gothard St. Suite B Huntington Beach CA 92647 (561)912-6108 kraig@aztecfiredesign. com BILL TO KRAIG HEMINGER 5342 GLENROY DRIVE HUNTINGTON BEACH CA 92649 (561)912-6108 KRAIG@AZTECFIREDESI GN.COM CONTRACTOR JOHNSON CONTROLS SECURITY SOLUTIONS LLC PO BOX 3042 BOCA RATON FL 33431 (561)912-6108 NICOLA.1.SMALLWILM BUSH@JCI.COM OWNER CSRA KOMAR DESERT CENTER 79795 CA-111 LA QUINTA CA 92253 (561)912-6108 CONDITIONS Description: NEW FIRE ALARM SYSTEM Type: FIRE ALARM (WEB)Subtype: COMMERCIAL - FIRE ALARM SYSTEM Status: ISSUED Applied: 7/5/2022 EPRS Parcel No: 600440001 Site Address: 79705 HIGHWAY 111 LA QUINTA,CA 92253 Approved: 8/10/2022 KHET Subdivision: PM 036269 Block: Lot: 1 Issued: 8/10/2022 ONLINE Lot Sq Ft: 0 Building Sq Ft: 0 Zoning: Finaled: Valuation: $25,000.00 Occupancy Type: Construction Type: Expired: 2/6/2023 EPRS No. Buildings: 0 No. Stories: 0 No. Unites: 0 Details: FINANCIAL INFORMATION Printed: Friday, March 03, 2023 3:04:18 PM 1 of 3 Permit Details City of La Quinta PERMIT NUMBER FA2022-0008 ATTACHMENTS Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED DOC 7/5/2022 Etrakit Public Registration FIRE ALARM DRAWINGS LH La Quinta, CA_FA_CD.pdf 1 BOND INFORMATION INSPECTIONS REVIEWS REVIEW TYPE REVIEWER SENT DATE DUE DATE RETURNED DATE STATUS REMARKS NOTES 1ST FIRE (2 WK)KOHL HETRICK 7/5/2022 7/19/2022 8/10/2022 APPROVED SEE ATTACHMENTS 1ST PERMIT TECH (1 DAY) PERMIT TECH BUCKET 7/5/2022 7/6/2022 7/6/2022 COMPLETE PARENT PROJECTS DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE RECEIPT #CHECK #METHOD PAID BY CLTD BY FIRE ALARM SYSTEMS 101-0000-42421 0 $500.00 $500.00 8/10/22 WEB12735 705106333 CREDIT Kraig Heminger EPRS FIRE ALARM SYSTEMS PC 101-0000-42420 0 $584.00 $584.00 8/10/22 WEB12735 705106333 CREDIT Kraig Heminger EPRS Total Paid for FIRE FEES: $1,084.00 $1,084.00 RECORDS MANAGEMENT FEE 101-0000-42416 0 $11.00 $11.00 8/10/22 WEB12735 705106333 CREDIT Kraig Heminger EPRS Total Paid for RECORDS MANAGEMENT FEE: $11.00 $11.00 TECHNOLOGY ENHANCEMENT FEE 502-0000-43611 0 $5.00 $5.00 8/10/22 WEB12735 705106333 CREDIT Kraig Heminger EPRS Total Paid for TECHNOLOGY ENHANCEMENT FEE: $5.00 $5.00 TOTALS:$1,100.00 $1,100.00 Printed: Friday, March 03, 2023 3:04:18 PM 2 of 3 Permit Details City of La Quinta PERMIT NUMBER FA2022-0008 ATTACHMENTS Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED DOC 7/5/2022 Etrakit Public Registration DATA SHEETS LH La Quinta, CA_FA_Submittal Book.pdf 1 DOC 8/10/2022 KOHL HETRICK FA2022-0008 - APPROVED PLANS.pdf FA2022-0008 - APPROVED PLANS.pdf 1 DOC 8/10/2022 KOHL HETRICK FA2022-0008 - COA AND JOB CARD.pdf FA2022-0008 - COA AND JOB CARD.pdf 1 Printed: Friday, March 03, 2023 3:04:18 PM 3 of 3 Permit Details City of La Quinta PERMIT NUMBER FA2022-0008 J123456789101112131415161718181716151413121110987654321DrawingPRODUCTTYPICALSFA1.2AUTHORIZED FOR:PERMIT / BIDREVISION INFORMATIONIssue Date: 05.09.22Restaurant #: 5663LA QUINTA CALa Quinta CA 9225379-705 HIGHWAY 111CONVERSIONLONGHORNJOHNSON CONTROLNATIONAL CENTER EXCELLENCE14200 E EXPOSITION AVE #1AAURORA, CO 800121-877-330-7404 977249C-10L ICENSE D EL ECTRICAL CONTRACTORSTATE OF CALI FOR NIA CLASSIFICATIONJOH N S O N CO N T ROLS SECURITY SOLUTIONSLICENSE No.SCALE:NTSAFIRE ALARM - FIRE RATED CONCRETE BLOCKWALLSCALE:NTSBFIRE ALARM - FIRE RATED GPY. WALLBOARDSCALE:NTSCFIRE ALARM - FIRE RATED GPY. WALLBOARDSCALE:NTSDFIRE ALARM - CEILING TO WALL TRANSITION AND OPEN WIRING SCALE:NTSEFIRE ALARM - PHONE CONNECTION (NOT USED)SCALE:NTSFFIRE ALARM - POWER DISCONNECTSCALE:NTSJFIRE ALARM - DEVICE WIRINGSCALE:NTSHFIRE ALARM - DROP CEILING & J BOX SCALE:NTSIFIRE ALARM - OS&Y TAMPER SWITCH GATE VALVE SCALE:NTSKFIRE ALARM - STROBE - HORN/STROBE DEVICE WIRINGSCALE:NTSGFIRE ALARM - WATERFLOW & BUTTERFLY TAMPER SWITCHES SCALE:NTSLFIRE ALARM - AUDIBLE DEVICE WIRINGOCTAGON JUNCTION BOXORSQUARE JUNCTION BOX1/2" CONDUIT4S BOX W/ COVERWALLBUTTERFLY TAMPER SWITCHSPRINKLER RISERFLOW SWITCH1/2" WP FLEX CONDUIT1/2" WP FLEX CONDUIT12(+)(-)312(+)(-)3FIRE RATED CABLEOR CONDUITEOL RESISTORAT LAST DEVICEFROM LAST DEVICE+-+-FIRE RATED CABLEOR CONDUITBREAK WIREDO NOT LOOPEOL RESISTORAT LAST DEVICEPRECEDING STROBEOR POWER SUPPLYSTROBESTROBE/HORN+-+-BREAK WIREDO NOT LOOPBREAK WIREDO NOT LOOPNEXT STROBE OR EOLPRECEDING STROBEOR POWER SUPPLYNEXT HORN OR EOLPRECEDING HORN OR POWER SUPPLYSCALE:NTSMFIRE ALARM - DEVICE MOUNTING HEIGHTSTAGDESCRIPTIONAUDIO/VISUAL DEVICE180" AFF MIN (ADA & NFPA) MEASUREMENTS SHOWN TO THE BOTTOM OF LEN96" AFF MAX (ADA & NFPA) MEASUREMENTS SHOWN TO THE TOP OF LEN80" AFF MIN (IBC) MEASUREMENTS SHOWN TO THE BOTTOM OF DEVICE96" AFF MAX (IBC) MEASUREMENTS SHOWN TO THE BOTTOM OF DEVICEVISUAL DEVICE280" AFF MIN (ADA & NFPA) MEASUREMENTS SHOWN TO THE BOTTOM OF LEN96" AFF MAX (ADA & NFPA) MEASUREMENTS SHOWN TO THE TOP OF LEN80" AFF MIN (IBC) MEASUREMENTS SHOWN TO THE BOTTOM OF DEVICE96" AFF MAX (IBC) MEASUREMENTS SHOWN TO THE BOTTOM OF DEVICEAUDIBLE DEVICE3AUDIBLE ONLY: 90" MIN AFF (OTHER MOUNTING HEIGHTS SHALL BE PERMITTED BYTHE AHJ PROVIDING IT MEETS THE SOUND LEVEL OUTPUT REQUIREDAUDIBLE ONLY: NFPA 72 AUDIBLE APPLIANCE 6" MIN BELOW FINISHED CEILINGWALL MOUNT APPLIANCE SHALL HAVE THEIR TOP ABOVE FINISHED FLOOR HEIGHTOF NOT LESS THAN 90" AFFFINISHED FLOORCEILING STRUCTUREFIREPUSH INPULL DOWN48" AFF MAX (ADA & NFPA)42" AFF MIN (ADA & NFPA)80" AFF MIN (ADA & NFPA)96" AFF MAX (ADA & NFPA)96" AFF MAX (IBC)80" AFF MIN (IBC)AUDIBLE ONLY:90" MIN AFF60" AFF TO CENTEROF LCD DISPLAYTAGDESCRIPTIONFIRE ALARM PULLSTATION442" AFF MIN (ADA & NFPA) MEASUREMENTS SHOWN ARE TOP OF PULL HANDLE48" AFF MAX (ADA & NFPA) MEASUREMENTS SHOWN ARE TOP OF PULL HANDLEFIRE ALARM CONTROL PANEL5FIRE ALARM PANEL: INSTALL FIRE ALARM CONTROL PANEL 60" MIN AFF & 72" MAXTO CENTER OF LCD DISPLAYTHE OPERABLE PART OF FIRE ALARM CONTROL PANEL SHALL NOT BE LESS THAN60" MIN & 72" MAXTAGDESCRIPTIONSMOKE DETECTOR6A12" MEASUREMENT SHOWN TO THE CLOSEST EDGE OF THE DETECTORHEAT DETECTOR6B12" MEASUREMENT SHOWN TO THE CLOSEST EDGE OF THE DETECTORSMOKE DETECTOR7A36" MIN MEASUREMENTS SHOWN TO THE CLOSEST EDGE OF THE SMOKE DETECTORA/C SUPPLY OR RETURN DIFFUSERHEAT DETECTOR7B36" MIN MEASUREMENTS SHOWN TO THE CLOSEST EDGE OF THE SMOKE DETECTORA/C SUPPLY OR RETURN DIFFUSERNOTES:FOR CEILINGS WITH BEAM DEPTHS OF LESS THAN 10% OF THE CEILING HEIGHT(0.1 H),SMOOTH CEILING SPACING SHALL BE PERMITTED.FOR CEILINGS WITH BEAM DEPTHS EQUAL TO OR GREATER THAN 10% OF THE CEILINGHEIGHT (0.1 H) AND BEAM SPACING EQUAL TO OR GREATER THAN 40 % OF THE CEILINGHEIGHT (0.4 H), SPOT-TYPE DETECTORS SHALL BE LOCATED ON THE CEILINGIN EACH BEAM POCKET.VISUAL APPLIANCE MOUNTING HEIGHT CONSIDERATIONS IN SLEEPING ROOMS:MIN DISTANCE IN SLEEPING ROOMS IS 24" (610mm) FROM CEILING TO TOPOF LENS FOR 110CD STROBES WITHIN 16' OF THE PILLOW.177CD STROBES, USED IN SLEEPING ROOMS, CAN BE WITHIN THE 24"MINIMUM DISTANCE FROM THE CEILING. THE HIGHER INTENSITY IS TOCOMPENSATE FOR A POSSIBLE SMOKE LAYER.DEVICE MOUNTING HEIGHT REFERENCE (PER NFPA 72)36"TO EXIT DOOR 60" MAXAUDIBLE/VISUAL& VISUAL ONLYAPPLIANCES SYNCHRONIZEMORE THAN TWO APPLIANCESTHAN IN ANY FIELD OF VIEWFOR CEILING HEIGHTS LESS THAN 86",THE VISUAL LENS MOUNTING HEIGHTSSHALL BE WITHIN 6" OF THE CEILINGA/C SUPPLY ORRETURN DIFFUSER12"12"AUDIBLE ONLY:NFPA 72 AUDIBLE APPLIANCE6" MIN BELOW FINISHED CEILINGWALL127A7B6A6B6A6B354FIRE ALARM WIRECONDUITNOTES:1CONDUIT SHALL BE USED FOR ALL EXPOSED FIRE ALARM CABLING INSTALLED BELOW JOISTS AND BEAMS.2CONDUIT SHALL BE A MINIMUM OF 3/4".CONDUIT PENETRATION U.L. C-AJ-10453M FIRE BARRIERCP 25WB+ CAULK OR EQUALPACKING MATERIAL1 OR 2 HOUR RATED CONCRETEBLOCK WALL ASSEMBLYCONDUITNOTES:1CONDUIT SHALL BE RIGIDLY SUPPORTED ON BOTH SIDES OF WALL ASSEMBLY.2THE ANNULAR SPACE BETWEEN CONDUIT AND PERIPHERY OF OPENING SHALL BE 0 TO 1-3/8"3MAXIMUM OF (1) CONDUIT PER FIRE TOP SYSTEM.4PACKING MATERIAL - MINIMUM 4" THICKNESS OF MINIMUM 8 PCF MINERAL WOOL BATT INSULATION SHALL BE FIRMLYPACKED INTO OPENING AS A PERMANENT FORM. PACKING MATERIAL SHALL BE RECESSED FROM BOTH SURFACES OFWALL AS REQUIRED TO ACCOMMODATE THE REQUIRED THICKNESS OF CAULK MATERIAL.5CAULK MATERIAL - MINIMUM 1/2" THICKNESS OF FILL MATERIAL SHALL BE APPLIED WITHIN THE ANNULUS, FLUSH WITHBOTH SURFACES OF THE WALL.1 OR 2 HOUR RATED GYP.WALLBOARD ASSEMBLY3M FIRE BARRIERCP 25WB+ CAULK OR EQUALCONDUIT PENETRATION U.L. W-L-1001NOTES:1CONDUIT SHALL BE INSTALLED AT CENTER OF STUD CAVITY WIDTH AND SHALL BE RIGIDLY SUPPORTED ON BOTH SIDESOF WALL ASSEMBLY.2CAULK FILL MATERIAL SHALL COMPLETELY FILL ANNULAR SPACE BETWEEN CONDUIT AND WALL; AND WITH A WIDTHOF 1/4 " DIAMETER BEAD OF CAULK APPLIED TO PERIMETER OF CONDUIT AT ITS EGRESS OF THE WALL. FOR CONDUIT1" DIAMETER AND SMALLER, ANNULAR SPACE SHALL BE 0 TO 3/16". FOR CONDUIT 4" DIAMETER AND SMALLER,ANNULAR SPACE SHALL BE 0 TO 1-1/2".3MAXIMUM OF (1) CONDUIT PER FIRE TOP SYSTEM.4CONSULT CURRENT U.L. FIRE RESISTANCE DIRECTORY FOR DETAILS.1 OR 2 HOUR RATED GYP.WALLBOARD ASSEMBLY3M FIRE BARRIERCP 25WB+ CAULK OR EQUALCABLE ORCABLE BUNDLECABLE PENETRATION U.L. W-L-3149NOTES:1CONDUIT SHALL BE RIGIDLY SUPPORTED ON BOTH SIDES OF WALL ASSEMBLY.2THE ANNULAR SPACE BETWEEN CABLE/CABLE BUNDLE AND PERIPHERY OF OPENING SHALL BE 0 TO 1".3MAXIMUM OF A 1" DIAMETER CABLE BUNDLE PER FIRESTOP SYSTEM.4CAULK MATERIAL - MINIMUM 5/8 " THICKNESS OF FILL MATERIAL APPLIED WITHIN ANNULUS, FLUSH WITH BOTHSURFACES OF THE WALL. MINIMUM 1/2" DIAMETER BEAD OF CAULK APPLIED AT THE CABLE/WALLBOARD INTERFACEAT POINT CONTACT LOCATION ON BOTH SIDES OF WALL.5CONSULT CURRENT U.L. FIRE RESISTANCE DIRECTORY FOR DETAILS.FIRE ALARM PANELCONDUITDISTRIBUTION PANELDEDICATED LOCKEDCIRCUIT BREAKERCONDUITFIRE ALARM PANELFIRE ALARM DISCONNECTTO DEDICATED LOCKED BRANCHCIRCUIT 120 VAC/20AMP SOURCEWALL4S JUNCTION BOXSCHEDULE 40 PVC OR RIGID CONDUITSCHEDULE 80 PVCOR RIGID CONDUITGROUND LINEWEATHERPROOF J-BOXWITH ELECTRICALLY SUPERVISEDCOVER TAMPER18" - 24"SCHEDULE 80 PVC OR RIGID CONDUITOS & Y TAMPER SWITCHWEATHERPROOF1/2" FLEX CONDUIT1/2" X 36" RIGID CONDUIT1/2" WEATHERPROOF BOX SUPPORT(FS50-1C ARLINGTON OR EQUIVALENT)WEATHERPROOF J-BOXWITH ELECTRICALLY SUPERVISEDCOVER TAMPERNOTES:1ALL CONDUIT SIZE WILL BE DETERMINED BY WIRE FILL.2ALL ELECTRICAL BOXES WILL BE DETERMINED BY CONDUIT SIZE AND WIRE FILL.ABCDEFGHJKLMNP DEDICATED 120 VAC20 AMP CIRCUIT(LOCKED)BATTERY12V 12AHBATTERY12V 12AHSYSTEMDOCUMENTATIONAS-BUILT DRAWINGSBATTERY 12V 7AH CELLUNIT18 AWG4 CONDFPLPFAADEDICATED 120 VAC20 AMP CIRCUIT(LOCKED)U.L. LISTED CENTRAL STATIONJOHNSON CONTROLS14200 EXPOSITION AVE.AURORA, CO. 800121-800-428-7124REEOLREEOLSSU00672FIRE LITEES-200XFACPMCBL-7MCBL-7SLC LOOP18 AWG / 2 COND, FPLP14 AWG2 CONDFPLP14 AWG2 CONDFPLP14 AWG2 CONDFPLP14 AWG2 CONDFPLPCIR4CIR3CIR2CIR1C1C2C3C4REEOLWP110REEOLC115C115C115C30C30C30C75C30C75C30C30C30REEOLREEOLREEOLC30C75C75C75C30C30MUSICSHUTDOWNRTUHVACSHUTDOWNDRTADFM04DWFM03VSM02AFM08RTUHVACSHUTDOWNRTFM09RTHVACSHUTDOWNRTSRTSRTSKHSSAOMM01AIMAOMM05AIMM06AOMM07AOMM10SD02SPD01SD03SD04RTURTHVACSHUTDOWNRTSAOMM11SD05RTURTHVACSHUTDOWNRTSAOMM12RTUFM13SD06WIRE CHARTSYMBOLCIRCUITTYPECIRCUIT DESCRIPTION>MINIMUM SIZE<AND TYPE OF WIREASLCSIGNALING LINE CIRCUIT(POWER LIMITED)2-#18AWGADANNANNUNCIATOR DATA BUS(BLK/RD =DATA)(WHT/GRN = PWR)4-#18AWGDIDCINITIATING DEVICE CIRCUIT(NON-INTELLIGENT DEVICES)2-#18AWGCTRIPNOTIFICATION APPLIANCE TRIP CKT.(COMBINED HORN & VISUAL CIRCUIT)2-#14AWGRTTESTREMOTE TEST STATION TEST4-#18AWGSH = SHEILDEDTW = TWISTED*WIRE MUST BE SHIELDED AS INDICATEDFIRE ALARM RISERDIAGRAM ANDCALCULATIONSFA1.3ABCDEFGHJKLMNP123456789101112131415161718181716151413121110987654321DrawingGENERAL NOTE1)ALL ADDRESSABLE DEVICES REQUIRE SLC LOOP FROM THE FACP TOOPERATE. REFER TO RISER/ONE-LINE DIAGRAM FOR REFERENCE.2)WIRE RUNS ARE DIAGRAMMATIC. ACTUAL INSTALLATION MAY VARY.CIRCUIT LENGTH SHALL NOT EXCEED DISTANCES PROVIDED INVOLTAGE DROP CALCULATIONS.3)DEVICE LOCATIONS ARE APPROXIMATE, EXACT LOCATIONS SHALL BEFIELD VERIFIED4)ALL FIRE ALARM CIRCUITS SHALL BE INSTALLED PER NEC ARTICLE 760(NATIONAL ELECTRIC CODE).5)WHERE CONDUIT IS REQUIRED, MINIMUM SIZE SHALL BE 3/4"6)ALL CABLES SHALL BE RUN UNEXPOSED THROUGHOUT THE ENTIRECABLE PATH.7)OPEN RUN CABLES CONCEALED ABOVE CEILING OR UNDER FLOORSSHALL BE ROUTED UNIFORMLY AND PERPENDICULAR TO THEBUILDING STRUCTURE. CABLES TURNS SHALL BE ROUTED AT 90 DEG.ANGLES TO THE BUILDING. NO DIAGONAL RUNS ARE PERMITTED.8)THE CIRCUIT PATHWAYS ARE DIAGRAMMATIC FOR EASE OFILLUSTRATION.RISER DIAGRAM NOTEDEVICE WIRING SHOWN IS CONCEPTUAL. POINT TO POINT CONNECTIONS MAY VARY. REFER TO FLOOR PLANS FOR REQUIRED EQUIPMENT LOCATIONS. THE ELECTRICAL CONTRACTOR SHALL REFERENCE EQUIPMENTINSTALLATION DOCUMENTS, DRAWING TERMINATION DETAILS, AND RISER DIAGRAM FOR COMPLETE EQUIPMENT INSTALLATION.SHOULD ANY CONFLICT ARISE BETWEEN DESIGNED PLANS, BATTERY CALCULATIONS, VOLTAGE DROPS, AND ACTUAL INSTALLATION SHALL BE BROUGHT TO THE ATTENTION OF JCI IN WRITING UPON DISCOVERY AND PRIORTO ELECTRICAL ROUGH.HWF2-COM BASIC SYSTEM FUNCTIONAL OPERATIONHWF2-COM BASIC SYSTEM FUNCTIONAL OPERATIONWHEN A FIRE ALARM CONDITION (ALARM, SUPERVISORY OR TROUBLE) ISDETECTED, THE FIRE ALARM CONTROL PANEL GOES OFF-HOOK TO DIAL THECENTRAL STATION. THE HWF2-COM DIALER CAPTURE MODULE DETECTS THEOFF-HOOK CONDITION AND PROVIDES THE FIRE PANEL WITH A DIAL TONEWHEN THE FIRE PANEL DETECTS THE DIAL TONE, IT BEGINS DIALING THECENTRAL STATION. AFTER THE DIALING IS COMPLETED, THE DIALERCAPTURE MODULE RETURNS A SIGNAL TO THE FIRE PANEL. THE FIRE PANELTHEN SENDS THE CONTACT ID REPORTS TO THE DIALER CAPTURE MODULE,WHICH IN TURN SENDS A SIGNAL AFTER THE REPORT IS SUCCESSFULLYRECEIVED FROM THE FIRE PANEL. THE DIALER CAPTURE MODULE SENDS THECONTACT ID REPORTS TO THE HWF2-COM SERIES COMMUNICATIONSMODULE. WHEN ALL THE REPORTS ARE SENT, THE FIRE PANEL GOESON-HOOK. THE HWF2-COM SERIES COMMUNICATIONS MODULE THENTRANSMITS THE MESSAGES TO THE CENTRAL STATION (EITHER OVER THELTE NETWORK OR THE INTERNET).SCALE:3/16" =1'-0"ARISER DIAGRAM AND CALCULATIONSNOTE:VOLTAGE FORMULA USED IS:VD = LENGTH (CIRCUIT MEASURED ONE-WAY IN FT.) X LOAD (IN AMPERES) X RESISTANCE (.00316 FOR 14AWG) X 2 (FOR RETURN RESISTANCE)WIRE RESISTANCE VALUES REFERENCED FROM NEC TABLE 8AUTHORIZED FOR:PERMIT / BIDREVISION INFORMATIONIssue Date: 05.09.22Restaurant #: 5663LA QUINTA CALa Quinta CA 9225379-705 HIGHWAY 111CONVERSIONLONGHORNJOHNSON CONTROLNATIONAL CENTER EXCELLENCE14200 E EXPOSITION AVE #1AAURORA, CO 800121-877-330-7404 977249C-10L ICENSE D EL ECTRICAL CONTRACTORSTATE OF CALI FOR NIA CLASSIFICATIONJOH N S O N CO N T ROLS SECURITY SOLUTIONSLICENSE No. 21x4821x5421x4821x5421x6021x6021x6021x42 21x42 21x5421x3021x5421x5421x3621x5421x4221x36LOBBYCOOLERKITCHENDISHWASHINGMECHROOMFIRE RISEROFFICEPREPPREPSERVICEYARDFREEZERSTORAGERECEIVINGEXPOCOOKTO-GOMOTHERSROOMPATIODININGBARBAR DININGWOMENMENALCOVESERVICEnew cpiFACPDOCFAAFACAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAA A A AAAAA AAAAAAAAAAAAKBDRTURTTOOFFICERTURTTOOFFICERTURTTOOFFICEWFM03VSM02D11FM09FM13FM08FM04DRTSX5KHSS435765765769AIMM06AOMM11AOMM12AOMM0512AOMM01AIMSD06SD02SD05SPD01RTURTTOOFFICE576AOMM10SD04RTURTTOOFFICE576AOMM07SD03VS1012ADTOFACPWIRE CHARTSYMBOLCIRCUITTYPECIRCUIT DESCRIPTION>MINIMUM SIZE<AND TYPE OF WIREASLCSIGNALING LINE CIRCUIT(POWER LIMITED)2-#18AWGADANNANNUNCIATOR DATA BUS(BLK/RD =DATA)(WHT/GRN = PWR)4-#18AWGDIDCINITIATING DEVICE CIRCUIT(NON-INTELLIGENT DEVICES)2-#18AWGCTRIPNOTIFICATION APPLIANCE TRIP CKT.(COMBINED HORN & VISUAL CIRCUIT)2-#14AWGRTTESTREMOTE TEST STATION TEST4-#18AWGSH = SHEILDEDTW = TWISTED*WIRE MUST BE SHIELDED AS INDICATEDFLAG NOTES FIRE ALARM PANEL COMMUNICATES TO MONITORING STATION VIA SOLE PATHCELLULAR COMMUNICATION.EXTERIOR HORN STROBE INSTALLED ABOVE FDC 10' ABOVE FINISHED GRADE.FIELD VERIFY LOCATION.ADDRESSABLE OUTPUT RELAY FOR GLOBAL SHUTDOWN.FIELD VERIFY LOCATION.DUAL MONITOR MODULE INSTALLED FOR SUPERVISION OF SPRINKLER FLOW &TAMPER VALVE.NEW FIRE ALARM PANEL SHALL BE CONNECTED TO DEDICATED 120 VAC POWER.LABEL CKT BREAKER "FIRE ALARM".DUCT DETECTORS SHALL BE SUPPLIED BY JCI AND INSTALLED BY OTHERS.ADDRESSABLE DUCT CONNECTS TO SLC. CONNECTIONS TO FIRE ALARM PANELSHALL BE BY JCI. SHALL BE MOUNTED WITHIN REURN AIR SIDE OF EACH ROOFTOP UNIT IN DUCTWORK. FIELD VERIFY LOCATIONS.MOUNT REMOTE TEST STATIONS IN MAIN OFFICE NEXT TO FIRE PANEL.MONITOR MODULE FOR SUPERVISION OF EXISTING KITCHEN HOOD. FIELD VERIFYLOCATION.RELAY INSTALLED FOR MUZAK SHUT DOWN WITHIN 3' OF MUZAK SYSTEM.TERMINATIONS FOR AUDIO SHUNT BY OTHERS.EXISTING FIRE DEPARTMENT CONNECTION. FIELD VERIFY LOCATION.INSTALL STI PROTECTIVE COVER OVER MANUAL PULL STATION.FIRE ALARM SYMBOLSQTYSYMBDESCRIPTIONMANUFACTURERMODELBACKBOXFIRE ALARM PULLSTATIONBG-12LXFIRELITE1 GANGMMF-3004" SQ x 2.5"DCRF-3004" SQ x 2.5"DMDF-3004" SQ x 2.5"DREMOTE ALARM INDICATING AND TEST SWITCHSYSTEM SENSORRTS151KEY1 GANGFIRE ALARM CONTROL PANELES-200XFIRELITEOWN1FIRE ALARM COMMUNICATORHWF2-COMHONEYWELLOWN1FIRE ALARM ANNUNCIATORANN-80FIRELITEANN-SB80KIT-R1FIRE ALARM DOCUMENT BOXSSU00672SPACE AGEOWN1FLOW DETECTOR/SWITCHVALVE SUPERVISORY (TAMPER) SWITCHEXISTINGEXISTINGHORN/STROBE - WALL MOUNT - WEATHERPROOFP2RKSYSTEM SENSORWBBSMOKE DETECTOR - DUCTSTROBE - CEILING MOUNTSCWLSYSTEM SENSOR4" SQ x 2.5"DADDRESSABLE INPUT MODULEADDRESSABLE OUTPUT MODULEDUAL ADDRESSABLE INPUT MODULEFIRELITEFIRELITEFIRELITE4116551411END OF LINE - RESISTORCIRCUIT CONTINUATION14D355PLFIRELITESMOKE DETECTOR - PHOTOELECTRICSD365FIRELITE1KITCHEN HOOD SYSTEMEXISTING14" SQ x 2.5"DHORN/STROBE - CEILING MOUNTPC2WLSYSTEM SENSOR4" SQ x 2.5"DCSFM7165-0075-05007165-0075-05007272-0075:05027150-0075:05037300-0075:01857300-0075:01857300-0075:0185OWN3240-0075:02217300-1653:02127125-1653:05037125-1653:0504FACPDOCFACFAAWPCCREEOLSIAMESE FIRE DEPARTMENT CONNECTIONEXISTING1KBKNOX BOXEXISTING1EXISTING KNOX BOX. FIELD VERIFY LOCATION.1011WFVSDFRTS129465783KHSSAIMAOMAIMSSPVS127300-1645:05117125-1653:0188FIRE ALARMNOTIFICATIONAPPLIANCEPLACEMENT PLANFA1.4.1ABCDEFGHJKLMNP123456789101112131415161718181716151413121110987654321Drawing* CEILING NOTEALL CEILING TILE AREAS ARE SMOOTH FLAT 12' OR LESS.* AUDIBLE DESIGN NOTE:DESIGN IS BASED ON AVERAGE AMBIENT SOUND LEVELFOR AN "A-2" OCCUPANCY REFER TO NFPA 72 TABLE A.18.4.3* ALL FIRE ALARM WIRE SHALL HAVE RED JACKET.* SLC LOOP SHALL HAVE A MINIMUM SEPARATION OF 1FT ON THE VERTICAL RUNS AND 4FT ONALL OTHERS PER NFPA 72 A.12.3.7.NFPA 72 A.12.3.7 The recommended minimum separation to preventphysical damage is 12 in. (300 mm) where the cable is installedvertically and 48 in. (1.22 m) where the cable is installed horizontally.The audible and visual alarms will comply with the provisions of Title 24 Section 907.GENERAL NOTE1)ALL ADDRESSABLE DEVICES REQUIRE SLC LOOP FROM THE FACP TOOPERATE. REFER TO RISER/ONE-LINE DIAGRAM FOR REFERENCE.2)WIRE RUNS ARE DIAGRAMMATIC. ACTUAL INSTALLATION MAY VARY.CIRCUIT LENGTH SHALL NOT EXCEED DISTANCES PROVIDED INVOLTAGE DROP CALCULATIONS.3)DEVICE LOCATIONS ARE APPROXIMATE, EXACT LOCATIONS SHALL BEFIELD VERIFIED4)ALL FIRE ALARM CIRCUITS SHALL BE INSTALLED PER NEC ARTICLE 760(NATIONAL ELECTRIC CODE).5)WHERE CONDUIT IS REQUIRED, MINIMUM SIZE SHALL BE 3/4"6)ALL CABLES SHALL BE RUN UNEXPOSED THROUGHOUT THE ENTIRECABLE PATH.7)OPEN RUN CABLES CONCEALED ABOVE CEILING OR UNDER FLOORSSHALL BE ROUTED UNIFORMLY AND PERPENDICULAR TO THEBUILDING STRUCTURE. CABLES TURNS SHALL BE ROUTED AT 90 DEG.ANGLES TO THE BUILDING. NO DIAGONAL RUNS ARE PERMITTED.8)THE CIRCUIT PATHWAYS ARE DIAGRAMMATIC FOR EASE OFILLUSTRATION.SCALE:3/16" =1'-0"AINITIATION APPLIANCE PLACEMENT PLAN TRUENAUTHORIZED FOR:PERMIT / BIDREVISION INFORMATIONIssue Date: 05.09.22Restaurant #: 5663LA QUINTA CALa Quinta CA 9225379-705 HIGHWAY 111CONVERSIONLONGHORNJOHNSON CONTROLNATIONAL CENTER EXCELLENCE14200 E EXPOSITION AVE #1AAURORA, CO 800121-877-330-7404 977249C-10L ICENSE D E L ECTRICAL CONTRACTORSTATE OF CALI FOR NIA CLASSIFICATIONJOH N S O N CO N T ROLS SECURITY SOLUTIONSLICENSE No. 21x4821x5421x4821x5421x6021x6021x6021x42 21x42 21x5421x3021x5421x5421x3621x5421x4221x36LOBBYCOOLERKITCHENDISHWASHINGMECHROOMFIRE RISEROFFICEPREPPREPSERVICEYARDFREEZERSTORAGERECEIVINGEXPOCOOKTO-GOMOTHERSROOMPATIODININGBARBAR DININGWOMENMENALCOVESERVICEnew cpiFACPDOCFACC4C4C4C3C3C3C3C3C3C3C3C3 C3 C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C3C2C2C2C2C2C2C2C2C2C2C2C2C2C2C2C2C2C2C2C2C1C1C1C1C1C1C1C1C1C1C1C1C1C1C1C1C1C1C1 C1C1C1C1C1C1C1C75C75C30C75WP110C30C75C75C30C30C30C30C115C115C115C30C30C30C30REEOLREEOLREEOLREEOLFAAKB12VS81012WIRE CHARTSYMBOLCIRCUITTYPECIRCUIT DESCRIPTION>MINIMUM SIZE<AND TYPE OF WIREASLCSIGNALING LINE CIRCUIT(POWER LIMITED)2-#18AWGADANNANNUNCIATOR DATA BUS(BLK/RD =DATA)(WHT/GRN = PWR)4-#18AWGDIDCINITIATING DEVICE CIRCUIT(NON-INTELLIGENT DEVICES)2-#18AWGCTRIPNOTIFICATION APPLIANCE TRIP CKT.(COMBINED HORN & VISUAL CIRCUIT)2-#14AWGRTTESTREMOTE TEST STATION TEST4-#18AWGSH = SHEILDEDTW = TWISTED*WIRE MUST BE SHIELDED AS INDICATEDFLAG NOTES FIRE ALARM PANEL COMMUNICATES TO MONITORING STATION VIA SOLE PATHCELLULAR COMMUNICATION.EXTERIOR HORN STROBE INSTALLED ABOVE FDC 10' ABOVE FINISHED GRADE.FIELD VERIFY LOCATION.ADDRESSABLE OUTPUT RELAY FOR GLOBAL SHUTDOWN.FIELD VERIFY LOCATION.DUAL MONITOR MODULE INSTALLED FOR SUPERVISION OF SPRINKLER FLOW &TAMPER VALVE.NEW FIRE ALARM PANEL SHALL BE CONNECTED TO DEDICATED 120 VAC POWER.LABEL CKT BREAKER "FIRE ALARM".DUCT DETECTORS SHALL BE SUPPLIED BY JCI AND INSTALLED BY OTHERS.ADDRESSABLE DUCT CONNECTS TO SLC. CONNECTIONS TO FIRE ALARM PANELSHALL BE BY JCI. SHALL BE MOUNTED WITHIN REURN AIR SIDE OF EACH ROOFTOP UNIT IN DUCTWORK. FIELD VERIFY LOCATIONS.MOUNT REMOTE TEST STATIONS IN MAIN OFFICE NEXT TO FIRE PANEL.MONITOR MODULE FOR SUPERVISION OF EXISTING KITCHEN HOOD. FIELD VERIFYLOCATION.RELAY INSTALLED FOR MUZAK SHUT DOWN WITHIN 3' OF MUZAK SYSTEM.TERMINATIONS FOR AUDIO SHUNT BY OTHERS.EXISTING FIRE DEPARTMENT CONNECTION. FIELD VERIFY LOCATION.INSTALL STI PROTECTIVE COVER OVER MANUAL PULL STATION.FIRE ALARM SYMBOLSQTYSYMBDESCRIPTIONMANUFACTURERMODELBACKBOXFIRE ALARM PULLSTATIONBG-12LXFIRELITE1 GANGMMF-3004" SQ x 2.5"DCRF-3004" SQ x 2.5"DMDF-3004" SQ x 2.5"DREMOTE ALARM INDICATING AND TEST SWITCHSYSTEM SENSORRTS151KEY1 GANGFIRE ALARM CONTROL PANELES-200XFIRELITEOWN1FIRE ALARM COMMUNICATORHWF2-COMHONEYWELLOWN1FIRE ALARM ANNUNCIATORANN-80FIRELITEANN-SB80KIT-R1FIRE ALARM DOCUMENT BOXSSU00672SPACE AGEOWN1FLOW DETECTOR/SWITCHVALVE SUPERVISORY (TAMPER) SWITCHEXISTINGEXISTINGHORN/STROBE - WALL MOUNT - WEATHERPROOFP2RKSYSTEM SENSORWBBSMOKE DETECTOR - DUCTSTROBE - CEILING MOUNTSCWLSYSTEM SENSOR4" SQ x 2.5"DADDRESSABLE INPUT MODULEADDRESSABLE OUTPUT MODULEDUAL ADDRESSABLE INPUT MODULEFIRELITEFIRELITEFIRELITE4116551411END OF LINE - RESISTORCIRCUIT CONTINUATION14D355PLFIRELITESMOKE DETECTOR - PHOTOELECTRICSD365FIRELITE1KITCHEN HOOD SYSTEMEXISTING14" SQ x 2.5"DHORN/STROBE - CEILING MOUNTPC2WLSYSTEM SENSOR4" SQ x 2.5"DCSFM7165-0075-05007165-0075-05007272-0075:05027150-0075:05037300-0075:01857300-0075:01857300-0075:0185OWN3240-0075:02217300-1653:02127125-1653:05037125-1653:0504FACPDOCFACFAAWPCCREEOLSIAMESE FIRE DEPARTMENT CONNECTIONEXISTING1KBKNOX BOXEXISTING1EXISTING KNOX BOX. FIELD VERIFY LOCATION.1011WFVSDFRTS129465783KHSSAIMAOMAIMSSPVS127300-1645:05117125-1653:0188FIRE ALARMINITIATING DEVICEPLACEMENT PLANFA1.4.2ABCDEFGHJKLMNP123456789101112131415161718181716151413121110987654321Drawing* CEILING NOTEALL CEILING TILE AREAS ARE SMOOTH FLAT 12' OR LESS.* AUDIBLE DESIGN NOTE:DESIGN IS BASED ON AVERAGE AMBIENT SOUND LEVELFOR AN "A-2" OCCUPANCY REFER TO NFPA 72 TABLE A.18.4.3* ALL FIRE ALARM WIRE SHALL HAVE RED JACKET.* SLC LOOP SHALL HAVE A MINIMUM SEPARATION OF 1FT ON THE VERTICAL RUNS AND 4FT ONALL OTHERS PER NFPA 72 A.12.3.7.NFPA 72 A.12.3.7 The recommended minimum separation to preventphysical damage is 12 in. (300 mm) where the cable is installedvertically and 48 in. (1.22 m) where the cable is installed horizontally.The audible and visual alarms will comply with the provisions of Title 24 Section 907.GENERAL NOTE1)ALL ADDRESSABLE DEVICES REQUIRE SLC LOOP FROM THE FACP TOOPERATE. REFER TO RISER/ONE-LINE DIAGRAM FOR REFERENCE.2)WIRE RUNS ARE DIAGRAMMATIC. ACTUAL INSTALLATION MAY VARY.CIRCUIT LENGTH SHALL NOT EXCEED DISTANCES PROVIDED INVOLTAGE DROP CALCULATIONS.3)DEVICE LOCATIONS ARE APPROXIMATE, EXACT LOCATIONS SHALL BEFIELD VERIFIED4)ALL FIRE ALARM CIRCUITS SHALL BE INSTALLED PER NEC ARTICLE 760(NATIONAL ELECTRIC CODE).5)WHERE CONDUIT IS REQUIRED, MINIMUM SIZE SHALL BE 3/4"6)ALL CABLES SHALL BE RUN UNEXPOSED THROUGHOUT THE ENTIRECABLE PATH.7)OPEN RUN CABLES CONCEALED ABOVE CEILING OR UNDER FLOORSSHALL BE ROUTED UNIFORMLY AND PERPENDICULAR TO THEBUILDING STRUCTURE. CABLES TURNS SHALL BE ROUTED AT 90 DEG.ANGLES TO THE BUILDING. NO DIAGONAL RUNS ARE PERMITTED.8)THE CIRCUIT PATHWAYS ARE DIAGRAMMATIC FOR EASE OFILLUSTRATION.SCALE:3/16" =1'-0"AINITIATING DEVICE PLACEMENT PLAN TRUENAUTHORIZED FOR:PERMIT / BIDREVISION INFORMATIONIssue Date: 05.09.22Restaurant #: 5663LA QUINTA CALa Quinta CA 9225379-705 HIGHWAY 111CONVERSIONLONGHORNJOHNSON CONTROLNATIONAL CENTER EXCELLENCE14200 E EXPOSITION AVE #1AAURORA, CO 800121-877-330-7404 977249C-10L ICENSE D E L ECTRICAL CONTRACTORSTATE OF CALI FOR NIA CLASSIFICATIONJOH N S O N CO N T ROLS SECURITY SOLUTIONSLICENSE No. PRODUCT DATA SUBMITTAL FIRE ALARM SYSTEM PRODUCT DATA SUBMITTALS PREPARED FOR: LONGHORN STEAKHOUSE TBD 79-705 HIGHWAY 111 LA QUINTA, CA 92253 Prepared By: JOHNSON CONTROLS INTERNATIONAL 14200 E. EXPOSITION AVE., AURORA, COLORADO 80012 Item # 1 ES-200X FIRE ALARM CONTROL PANEL 2 CSFM 7165-0075:0500 3 ANN-80 FIRE ALARM ANNUNCIATOR 4 CSFM 7120-0075:0211 5 HWF2-COM CELL DIALER 6 SSU00677 FIRE RECORDS DOCUMENT BOX 7 SD365 INTELLIGENT PHOTO SMOKE DETECTOR 8 CSFM 7272-0075:0502 9 D355PL INTELLIGENT DUCT PHOTO SMOKE DETECTOR 10 CSFM 3240-0075:0221 11 BG-12LX INTELLIGENT MANUAL PULL STATION 12 CSFM 7150-0075:0503 Supervising Modules, Relays and Ancillary Equipment MMF-300 INTELLIGENT MONITOR MODULE MDF-300 INTELLIGENT DUAL MONITOR MODULE 14 CSFM 7300-0075:0185 15 CRF-300 ADDRESSABLE RELAY 16 CSFM 7300-0075:0185 17 RTS-151 KEY REMOTE TEST SWITCH 18 CSFM 7300-1653:0212 19 STI-1230 PULL STATION COVER SCWL MULTI - CANDELA CEILING MOUNT STROBE WHITE PC2WL MULTI - CANDELA CEILING MOUNT HORN STROBE WHITE 21 CSFM 7125-1653:0504 22 CSFM 7125-1653:0503 23 P2RK MULTI - CANDELA WEATHERPROOFF HORN STROBE 24 CSFM 7125-1653:0188 20 Notification Appliances Product Information Table of Contents Fire Alarm Control Panel & Panel Components Initiating Devices 13 DF-60957:A • 1/8/2018 — Page 1 of 4 ES-200X Intelligent Addressable FACP with Communicator Addressable Fire Alarm Control Panels DF-60957:A General The ES-200X is the latest intelligent addressable Fire Alarm Control Panel (FACP) from Fire•Lite Alarms. The ES-200X comes with a pre-installed communicator and supports up to 198 addressable devices (99 detectors and 99 modules). With an extensive list of powerful features, the ES-200X programs just like Fire•Lite’s other addressable products, yet fits into applications previously served only by conventional panels. The pre-installed IPOTS-COM is a dual technology (POTS and IP) communicator. The POTS transmits system status (alarms, troubles, AC loss, etc.) to a Central Station via the public switched telephone network. The IP communicator’s internet monitoring capability sends alarm signals over the Internet saving the monthly cost of two dedi- cated business telephone lines. Although not required, the second- ary telephone line may be retained providing backup communication over the public switched telephone line. Optional cellular reporting is available using the CELL-MOD or CELL-CAB-FL. Remote and local programming of the control panel is possible using the FS-Tools Upload/Download utility. Programming databases can be uploaded/downloaded via the panel’s USB port (and USB cable) or via an ethernet connection using the IPOTS-COM communicator. The USB port also allows for the download or upload of the entire program, history file, walk-test data, current status and system volt- ages by means of a USB flash drive. The power supply and all electronics are contained on a circuit board supported on a new quick install chassis and housed in a metal cabinet. Available accessories include local and remote upload/download software, remote annunciators, and reverse polar- ity/city box transmitter (4XTMF). Features • Listed to UL Standard 864, 10th edition • Pre-installed IPOTS-COM Ethernet IP and POTS (Plain Old Tele- phone Service) Central Station Communicator over AlarmNet • Optional CELL-MOD or CELL-CAB-FL GSM Central Station Communicator over AlarmNet® • Automated activation of the ECC-50/100 Emergency Command Center • ECC-FFT Firefighter Telephone option • Compatible with SWIFT® wireless devices • Auto-programming (learn mode) reduces installation time. Reports two devices set to the same address • Four built-in, independently programmable Style Z (Class A) or Style Y (Class B) NAC circuits • Selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices • Notification Appliance Circuit End of Line resistor matching • Four programmable function keys for ease of maintenance • Two programmable relays and one fixed trouble relay • Built-in Programmer • Integral 80-character LCD display with backlighting • Real-time clock/calendar with automatic daylight savings control • History file with 1,000 event capacity • Addressable sounder base compatibility • Multi-criteria detector (smoke, heat, CO) with programmable response • Control module delay timer • Automatic detector sensitivity testing (NFPA 72 compliant) • Automatic device type-code verification • Point trouble identification • Waterflow selection per module point • Alarm verification selection per detector point • Maintenance alert warns when smoke detector dust accumula- tion is excessive • One-person audible or silent walk test with walk-test log and printout • System alarm verification selection per detector point • PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA 72 compliant) • Up to 16 ANN-BUS annunciators- 8 per each ANN-Bus • Remote Acknowledge, Alarm Silence, Reset and Drill via addressable modules or remote annunciator • Upload/Download of program and data via USB with optional FS- Tools Programming Utility SLC COMMUNICATION LOOP • Supports LiteSpeed™ and CLIP protocols • SLC operates up to 10,000 ft. (3,000 m) in LiteSpeed mode with twisted, unshielded wire • Single addressable SLC loop which meets NFPA Class B and Class A requirements • 198 addressable device capacity (99 addressable detectors and 99 modules) • Compatible with Fire•Lite’s addressable devices (refer to the SLC Wiring Manual) NOTIFICATION APPLIANCE CIRCUITS (NACS) • Two independently programmable output circuits. Circuits can be configured for the following outputs: –Style Y (Class B) –Style Z (Class A) • Silence Inhibit and Autosilence timer options • Continuous, March Time, Temporal, or California code for main circuit board NACs with two-stage capability • Selectable strobe synchronization per NAC • 2.5 A special application, 250mA regulated, total power for NACs NOTE: Maximum or total 24VDC system power shared between all NAC circuits and the ANN-BUS is 2.7 A Page 2 of 4 — DF-60957:A • 1/8/2018 PROGRAMMING AND SOFTWARE • Autoprogramming (learn mode) reduces installation time • Custom English labels (per point) may be manually entered or selected from an internal library file • Two programmable Form-C relay outputs • 99 software zones • Continuous fire protection during online programming • Program Check automatically catches common errors not linked to any zone or input point •OFFLINE PROGRAMMING: Create the entire program in your office using FS-Tools, a Windows®-based software package, and upload/download system programming locally. Offline program- ming requires an ethernet connection. FS-Tools is available on www.firelite.com. User interface LED INDICATORS • Fire Alarm (red) • CO Alarm (red) • AC Power (green) • Supervisory (yellow) • Trouble (yellow) • Ground fault (yellow) • Battery fault (yellow) • Disabled (yellow) • Maintenance (yellow) • Communication (yellow) • Alarm Silenced (yellow) • F1-F4 Programmable Function Keys (yellow) KEYPAD • 16 key alpha-numeric pad • Acknowledge • Alarm Silence • Drill (Manual Evacuate) • Four (4) programmable function keys • Reset (lamp test) PRODUCT LINE INFORMATION ES-200X: Addressable Fire Alarm Control Panel with one SLC loop. Includes main circuit board with display, pre-installed communicator, chassis with transformer, backbox with door, plastic bag containing screws, cables, key, etc. (For ES-200XC, refer to DF-60958.) FS-Tools: Programming software for Windows®-based PC com- puter. Available for download at www.firelite.com. CELL-CAB-FL/CELL-MOD: Optional GSM communicators. IPOTS-COM: Dual technology (POTS and IP) communicator. (replacement board) DP-ES-R: Optional dress panel for the ES-200X. TR-CE: Optional trim ring for semi-flush mounting. BB-2F: Optional cabinet for one or two modules. BB-6F: Optional cabinet for up to six modules mounted on CHS-6 chassis. BB-26: Battery backbox, holds up to two 25 AH batteries and CHG- 75. BB-55F: Battery box, houses two 55 AH batteries CHS-6: Chassis, mounts up to six multi-modules in a BB-6F cabinet. CHG-75: Battery charger for lead-acid batteries with a rating of 25 to 75 AH. CHG-120F: Remote battery charging system for lead-acid batteries with a rating of 55 to 120 AH. Requires additional BB-55F for mount- ing. BAT Series: Batteries, see data sheet DF-52397. PRN Series: UL listed compatible event printer. Uses tractor-fed paper. OPTIONAL MODULES 4XTMF Reverse Polarity Transmitter Module: Provides a super- vised output for local energy municipal box transmitter, alarm and trouble. Includes a disable switch and disable trouble LED. PWRMOD24 Power Expander Module: Optional power module. Increases alarm power output to 6 amps. COMPATIBLE ANNUNCIATORS ANN-80: Remote LCD annunciator mimics the information dis- played on the FACP LCD display. Recommended wire type is un- shielded. ANN-100: Remote LCD annunciator mimics the information dis- played on the FACP LCD display. Recommended wire type is un- shielded. For use in FM applications only. ANN-I/O: LED Driver Module provides connections to a user sup- plied graphic annunciator. (See DF-52430.) ANN-LED: Annunciator Module provides three LEDs for each zone: Alarm, Trouble, and Supervisory. Ships with red enclosure. (See DF- 60241.) ANN-RLED: Provides alarm (red) indicators for up to 30 input zones or addressable points. (See DF-60241.) ANN-RLY: Relay Module provides 10 programmable Form-C relays. Can be mounted inside the cabinet. (See DF-52431.) ANN-S/PG: Serial/Parallel Printer Gateway module provides a con- nection for a serial or parallel printer. (See DF-52429.) ADDRESSABLE DEVICES All feature a polling LED and rotary switches for addressing. SD365: Addressable low-profile photoelectric smoke detector. Lite- Speed only. SD365-IV: Addressable low-profile photoelectric smoke detector. Ivory. LiteSpeed and CLIP mode. SD365T: Addressable low-profile photoelectric smoke detector with thermal sensor. LiteSpeed only. SD365T-IV: Addressable low-profile photoelectric smoke detector with thermal sensor. Ivory. LiteSpeed and CLIP mode. SD365R: Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing. LiteSpeed only. SD365R-IV: Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing. Ivory. Lite- Speed and CLIP mode. H365: Low-profile 135°F fixed thermal sensor. LiteSpeed only. H365-IV: Low-profile 135°F fixed thermal sensor. Ivory. LiteSpeed and CLIP mode. H365R: Low-profile, intelligent, rate-of-rise thermal sensor. Lite- Speed only. H365R-IV: Low-profile, intelligent, rate-of-rise thermal sensor. Ivory. LiteSpeed and CLIP mode. H365HT: Low-profile intelligent 190°F/88°C fixed thermal sensor. LiteSpeed only. H365HT-IV: Low-profile intelligent 190°F/88°C fixed thermal sensor. Ivory. LiteSpeed and CLIP mode. Legacy Devices CP355: Addressable low-profile ionization smoke detector. SD355: Addressable low-profile photoelectric smoke detector. SD355T: Addressable low-profile photoelectric smoke detector with thermal sensor. SD355R: Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing. SD355CO: Addressable, low-profile device that provides fire, heat, and carbon monoxide (CO) detection. H355: Fast-response, low-profile heat detector. DF-60957:A • 1/8/2018 — Page 3 of 4 H355R: Fast-response, low-profile heat detector with rate-of-rise option. H355HT: Fast-response, low-profile heat detector that activates at 190°F/88°C. AD355: Low-profile, intelligent, “Adapt” multi-sensor detector (B350LP base included). B200SR: Addressable sounder base. BEAM355: Intelligent beam smoke detector. BEAM355S: Intelligent beam smoke detector with integral sensitiv- ity test. D355PL: InnovairFlex low-flow non-relay duct-detector housing; includes SD355R. DNR: InnovairFlex low-flow non-relay duct-detector housing. (Order SD355R/SD365R separately.) DNRW: InnovairFlex low-flow non-relay duct-detector housing, with NEMA-4 rating. Watertight. (Order SD355R/SD365R separately.) Addressable Modules MMF-300: Addressable Monitor Module for one zone of normally- open dry-contact initiating devices. Mounts in standard 4.0" (10.16 cm.) box. Includes plastic cover plate and end-of-line resistor. Mod- ule may be configured for either a Style B (Class B) or Style D (Class A) IDC. MDF-300: Dual Monitor Module. Same as MMF-300 except it pro- vides two Style B (Class B) only IDCs. MMF-301: Miniature version of MMF-300. Excludes LED and Style D option. Connects with wire pigtails. May mount in device backbox. MMF-302: Similar to MMF-300. Addressable Monitor Module for one zone of conventional two-wire detectors. Requires resettable 24 VDC power. Refer to the Device Compatibility Document for listed compatible devices and quantity limitation. CMF-300: Addressable Control Module for one Style Y/Z (Class B/ A) zone of supervised polarized Notification Appliances. Mounts directly to a 4.0" (10.16 cm.) electrical box. NAC option requires external 24 VDC to power notification appliances. CRF-300: Addressable relay module containing two isolated sets of Form-C contacts, which operate as a DPDT switch. Mounts directly to a 4.0" (10.16 cm.) box, surface mount using the SMB500. BG-12LX: Addressable manual pull station with interface module mounted inside. I300: This module isolates the SLC loop from short circuit conditions (required for Style 6 or 7 operation). ISO-6: Six-fault isolator module. Mount one or two modules in a BB- 2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. SMB500: Used to mount all modules except the MMF-301 and M301. MMF-300-10: Ten-input monitor module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. MMF-302-6: Six-zone interface module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. CMF-300-6: Six-circuit supervised control module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. CRF-300-6: Six-relay control module (Form-C relays). Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. SWIFT Wireless Devices W-GATE: LiteSpeed Wireless Gateway W-SD355: LiteSpeed intelligent, wireless photo detector. W-H355R: LiteSpeed intelligent wireless rate of rise (135°) heat detector. W-SD355T: intelligent wireless photo/heat detector. W-H355: LiteSpeed intelligent wireless fixed-temperature (135°) heat detector. W-MMF: LiteSpeed Intelligent wireless monitor module. W-CRF: LiteSpeed Intelligent wireless relay module. W-BG12LX: LiteSpeed Intelligent wireless pull station. WAV-RL, WAV-WL,WAV-CRL,WAV-CWL: LiteSpeed Intelligent AV bases. W-USB: Wireless USB radio/antenna dongle that plugs into the USB port of a PC running SWIFT Tools. SWIFT Tools: Programming and diagnostic utility for the Wireless Gateway and devices. Available for download from firelite.com. NOTE: For more information on Compatible Addressable Devices for use with the ES-200X, see the following data sheets (document num- bers): SD365 Series (DF-61010), H365 Series (DF-61011), AD355 (DF- 52386), BG-12LX (DF-52013), CMF-300-6 (DF-52365), CRF-300-6 (DF- 52374), CMF/CRF Series (DF-52130), CP355 (DF-52383), H355 Series (DF-52385), I300 (DF-52389), ISO-6 (DF-60485), MMF-300 Series/ MDF-300 (DF-52121), MMF-300-10 (DF-52347), MMF-302-6 (DF- 52356), SD355/SD355T (DF-52384), and SLC Wiring Manual (51309). NOTE: Legacy 300 Series detection devices such as the CP300/CP350, SD300(T)/SD350(T) and older modules such as the M300, M301, M302, C304, and BG-10LX are not compatible with LiteSpeed polling. If the SLC contains one of these devices, polling must be set for standard CLIP protocol. Please consult factory for further information on previous 300 Series devices. ADDRESSABLE DEVICE ACCESSORIES End-of-Line Resistor Assembly (R-47K and R-3.9K): The 47k ohm assembly supervises the MMF-300, MDF-300, MMF-301, and CMF-300 module circuits. The 3.9k ohm assembly supervises the MMF-302 module circuit. These resistors are included with each module. Power Supervision Relay: Supervises the power to 4-wire smoke detectors and notification appliances. Wiring Requirements While shielded wire is not required, it is recommended that all SLC wiring be twisted-pair to minimize the effects of electrical interfer- ence. Refer to the panel manual for wiring details. AlarmNet®, Fire-Lite® Alarms, SWIFT®, and System Sensor® are registered trademarks of Honeywell International Inc. Microsoft® and Windows® are registered trademarks of the Microsoft Corporation. ©2018 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Page 4 of 4 — DF-60957:A • 1/8/2018 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com Assembled in the USA SYSTEM SPECIFICATIONS System Capacity • Intelligent Signaling Line Circuits................................................1 • Addressable device capacity..................................................198 • Programmable software zones.................................................99 • Annunciators.............................................................................16 Electrical Specifications AC Power: 120/240 VAC, 50/60 Hz, 3.25 A. Wire size: minimum 14 AWG (2.00 mm2) with 600 V insulation. Nonpower-limited, super- vised. Battery: Two 12 V 18 AH lead-acid batteries. Battery Charger Capacity: 7-18 AH (ES-200X cabinet holds maximum of two 18 AH batteries.) Communication Loop: Supervised and power-limited. Notification Appliance Circuits: Terminal Block provides connec- tions for four NACs, Style Y (Class B) or Style Z (Class A). Special Application power. Power-limited, supervised circuitry. Maximum signaling current per circuit: 2.5 amps special application, 250mA regulated. End-of-Line Resistor: 4.7k ohm, ½ watt (P/N 71252 UL listed) for Style Y (Class B) NAC; system capable of 1.9 kΩ - 22 kΩ ELR range. Refer to the Fire•Lite Device Compatibility Document for listed compatible devices. Two Programmable Relays and One Fixed Trouble Relay: Con- tact rating: 2.0 A @ 30 VDC (resistive), 0.5 A @ 30 VAC (resistive). Form-C relays, non-power-limited, non-supervised. Cabinet Specifications Door: 19.26" (48.92 cm.) high x 16.82" (42.73 cm.) wide x 0.72" (1.82 cm.) deep. Backbox: 19.00" (48.26 cm.) high x 16.65" (42.29 cm.) wide x 5.25" (13.34 cm.) deep. Trim Ring (TR-CE): 22.00" (55.88 cm.) high x 19.65" (49.91 cm.) wide. Shipping Specifications Weight: 26.9 lbs. (12.20 kg.) Dimensions: 20.00” (50.80 cm.) high x 22.5” (57.15 cm.) wide x 8.5” (21.59 cm.) deep. Temperature and Humidity Ranges NFPA Standards The ES-200X complies with the following NFPA 72 Fire Alarm Sys- tems requirements: – LOCAL (Automatic, Manual, Waterflow and Sprinkler Supervi- sory). – AUXILIARY (Automatic, Manual and Waterflow) (requires 4XTMF). – REMOTE STATION (Automatic, Manual and Waterflow) (Where a DACT is not accepted, the alarm, trouble and supervi- sory relays may be connected to UL 864 listed transmitters. For reverse polarity signaling of alarm and trouble, 4XTMF is required.) – PROPRIETARY (Automatic, Manual and Waterflow). – CENTRAL STATION (Automatic, Manual and Waterflow, and Sprinkler Supervised). –OT, PSDN (Other Technologies, Packet-switched Data Net- work) – IBC 2012, IBC 2009, IBC 2006, IBC 2003, IBC 2000 (Seismic). – CBC 2007 (Seismic) Agency Listings and Approvals The listings and approvals below apply to the basic ES-200X control panel. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. •UL: S624 NOTE: See DF-60958 for ULC-listed model. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7165-0075:0500 Page 1 of 2 CATEGORY: 7165 -- FIRE ALARM CONTROL UNIT (COMMERCIAL) LISTEE:FIRE-LITE ALARMS INC.One Fire-Lite Place, Northford, CT 06410-1653 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models ES-50X and ES-200X Addressable Fire Alarm Control Units. Automatic, manual, waterflow, sprinkler supervisory, local, remote station (PPU), and central station (PPU) services. The ES-50X is a compact version of the ES-200X. The ES-50X has 50 addressable device capability and 2 Notification Appliance Circuits with a 3.0 amps total 24VDC output in Alarm. The ES-200X has 198 addressable device capability and 4 Notification Appliance Circuits with 3.0amps total 24VDC output in Alarm expandable to 6.0amps with Model PWRMOD24. The Model IPOTS-COM provides Phone and IP communication. *The CELL-MODE has the option to be configured by a compatible control unit for the following pathways: Cellular only without a backup path, primary Cellular communication path, or secondary Cellular communication path. Models ES-50X and ES-200X system components are as follows: IPOTS-COM POTS and IP Communicator 4XTMF Transmitter Module ANN-80 Remote Annunciator Module ANN-100 Remote Annunciator Module ANN-I/O LED Driver Module ANN-S/PG Serial/Parallel Interface Module ANN-RLY Form-C Relay Module ANN-LED Annunciator Module ANN-RLED Annunciator Module CELL-MOD GSM Communicator DP-ES-R Dress Panel Model ES-200X system components are as follows: PWRMOD24 NAC Power Expander Module Refer to the listee's data sheet for additional detailed product description and operational considerations. RATING:120/240Vac 50/60Hz *Rev 10-01-19 gt July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator Listing No. Page 2 of 2 7165-0075:0500 INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as fire alarm control units, emergency alarm system control units and process management equipment for use with separately listed compatible initiating and indicating devices. Refer to Manufacturers Installation Instruction Manual for details. NOTE: For Fire Alarm Verification Feature (Delay of fire alarm), the maximum Retard/Reset/Restart period must be adjusted to 30 seconds or less. *Rev 10-01-19 gt July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator df-52417:c • 05/22/09 — Page 1 of 2 ANN-80 80-Character LCD Serial Annunciator Annunciators df-52417:c • B-90 52417cov.jpgGeneral The ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced condi- tions. The ANN-80 and the FACP communicate over a two-wire serial interface employing the ANN-BUS communication format. Connected devices are powered, via two additional wires, by either the host FACP or a remote UL-listed, filtered power supply. ANN-80 is red; for white, order ANN-80-W. The ANN-80 displays English-language text of system point information including device type, zone, independent point alarm, trouble or supervisory status, as well as any custom alpha labels programmed into the control panel. It includes con- trol switches for remote control of critical system functions. (A keyswitch prevents unauthorized operation of the control switches.) Up to eight ANN-80s may be connected to the ANN-BUS of each FACP. No programming is required, which saves time dur- ing system commissioning. Features • Listed to UL Standard 864, 9th Edition. • Backlit 80-character LCD display (20 characters x 4 lines). • Mimics all display information from the host panel. • Control switches for System Acknowledge, Signal Silence, Drill, and Reset. • Control switches can be independently enabled or disabled at the FACP. • Keyswitch enables/disables control switches and mechani- cally locks annunciator enclosure • Keyswitch can be enabled or disabled at the FACP. • Enclosure supervised for tamper. • System status LEDs for AC Power, Alarm, Trouble, Supervi- sory, and Alarm Silence. • Local sounder can be enabled or disabled at the FACP. • ANN-80 connects to the ANN-BUS terminal on the FACP and requires minimal panel programming. • Displays device type identifiers, individual point alarm, trou- ble, supervisory, zone, and custom alpha labels. • Time-and date display field. • Surface mount directly to wall or to single, double, or 4" square electrical box. • Semi-flush mount to single, double, or 4" square electrical box. Use ANN-SB80KIT for angled view mounting. • Can be remotely located up to 6,000 feet (1,800 m) from the panel. • Backlight turns off during AC loss to conserve battery power but will turn back on if an alarm condition occurs. • May be powered by 24 VDC from the host FACP or by remote power supply (requires 24 VDC). • Up to eight ANN-80s can be connected on the ANN-BUS. Controls and Indicators •AC Power •Alarm •Trouble • Supervisory • Alarm Silenced Specifications •Operating voltage range: 18 VDC to 28 VDC. •Current consumption @ 24 VDC nominal (filtered and non- resettable): 40 mA maximum. •Ambient temperature: 32°F to 120°F (0°C to 49°C). •Relative humidity: 93% ± 2% RH (noncondensing) at 32°C ± 2°C (90°F ± 3°F). • 5.375” (13.65 cm.) high x 6.875” (17.46 cm.) wide x 1.375” (3.49 cm.) deep. • For use indoors in a dry location. • All connections are power-limited and supervised. Agency Listings and Approvals The listings and approvals below apply to the ANN-80. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. •UL: S2424 •FM approved •CSFM: 7120-0075:211 •MEA: 442-06-E The ANN-BUS POWERING THE DEVICES ON THE ANN-BUS FROM AUXILIARY POWER SUPPLY The ANN-BUS can be powered by an auxiliary power supply when the maximum number of ANN-BUS devices exceeds the ANN-BUS power requirements. See the FACP manual for more information. Page 2 of 2 — df-52417:c • 05/22/09 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com FireLite® Alarms is a registered trademark of Honeywell International Inc. ©2009 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Made in the U.S. A. ANN-BUS DEVICE ADDRESSING Each ANN-BUS device requires a unique address (ID Number) in order to communicate with the FACP. A maximum of 8 devices can be connected to the FACP ANN-BUS communication circuit. See the FACP manual for more information. WIRE REQUIREMENTS: COMMUNICATIONS CIRCUIT The ANN-80 connects to the FACP ANN-BUS communications circuit. To determine the type of wire and the maximum wiring distance that can be used with FACP ANN-BUS accessory mod- ules, it is necessary to calculate the total worst case current draw for all modules on a single 4-conductor bus. The total worst case current draw is calculated by adding the individual worst case currents for each module. NOTE: For total worst case current draw on a single ANN-BUS refer to appropriate FACP manual. After calculating the total worst case current draw, the following table specifies the maximum distance the modules can be located from the FACP on a single wire run. The table ensures 6.0 volts of line drop maximum. In general, the wire length is lim- ited by resistance, but for heavier wire gauges, capacitance is the limiting factor. These cases are marked in the chart with an asterisk (*). Maxi- mum length can never be more than 6,000 feet (1,800 m), regardless of gauge used. See table below. WIRE REQUIREMENTS: POWER CIRCUIT • 14 to 18 AWG (0.75 - 2.08 mm 2) wire for 24 VDC power cir- cuit is acceptable. Power wire distance limitation is set by 1.2 volt maximum line drop form source to end of circuit. • All connections are power-limited and supervised. • A maximum of eight ANN-80 modules may be connected to this circuit. WIRING CONFIGURATION The following figure illustrates the wiring between the FACP and ANN-BUS devices. FACP Wiring to ANN-BUS Device ORDERING OPTIONS: ANN-80: Red 80 character LCD Annunciator. ANN-80-W: White, 80 character LCD Annunciator. ANN-SB80KIT-R: Red surface mount backbox with angled wedge. ANN-SB80KIT-W: White surface mount backbox with angled wedge. Communication Pair Wiring Distance: FACP to Last ANN-BUS Module Total Worst Case Current Draw (amps)22 Gauge 18 Gauge 16 Gauge 14 Gauge 0.100 1,852 ft. 4,688 ft. * 6,000 ft. *6,000 ft. 0.200 926 ft. 2,344 ft. 3,731 ft. 5,906 ft. 0.300 617 ft. 1,563 ft. 2,488 ft. 3,937 ft. 0.400 463 ft. 1,172 ft. 1,866 ft. 2,953 ft. 0.500 370 ft. 938 ft. 1,493 ft. 2,362 ft. 0.600 309 ft. 781 ft. 1,244 ft. 1,969 ft. 0.700 265 ft. 670 ft. 1,066 ft. 1,687 ft. 0.800 231 ft. 586 ft. 933 ft. 1,476 ft. 0.900 206 ft. 521 ft. 829 ft. 1,312 ft. 1.000 (max.) 185 ft. 469 ft. 746 ft. 1,181 ft. ANN-BUS and power wiring are supervised and power-limited. ANN-BUS Device MS-9050UD CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7120-0075:0211 Page 1 of 1 CATEGORY: 7120 -- ANNUNCIATORS LISTEE:FIRE-LITE ALARMS INC.One Fire-Lite Place, Northford, CT 06410-1653 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Model ANN-80 and *ANN-80W remote fire annunciators. Unit is a 80-character, supervised backlit LCD fire annunciator. Communication between the control panel and the annunciator is accomplished over a two-wire serial interface employing the ANN-BUS protocol. Refer to listee's data sheet for additional detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances and in manner acceptable to the authority having jurisdiction. MARKING: Listee's name, product number, electrical rating and UL label. APPROVAL: Listed as an annunciators for use separately listed compatible fire alarm control units. Refer to Manufacturers Installation Manual for details. *Rev. 04-28-08 bh July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator HWF2-COM SERIES HWF2A-COM HWF2V-COM LTE / IP Single or Dual Path Commercial Fire Communicators The HWF2-COM Series LTE / IP fire communicators are single or dual path commercial fire alarm communicators that offer Contact ID reporting with any FACP (fire alarm control panel) with a built-in dialer. Models include: HWF2A-COM (AT&T LTE & IP) HWF2V-COM (Verizon LTE & IP) Both models connect directly to the primary or secondary communication ports of a fire panel’s digital alarm communicator transmitter (DACT). Three selectable reporting paths include: LTE cellular only, IP only, or IP primary with LTE cellular backup. All signals from the HWF2-COM Series are delivered to the AlarmNet® network control center which routes highly encrypted, cybersecured Ethernet data packets via a customer-provided Internet connection or LTE cellular network to the appropriate central station. The AlarmNet® network control center is fully redundant and monitored 24/7. Installation and programming are easy using the handheld 7720P Programming tool. FEATURES AND BENEFITS •LTE and IP connection tested every day • Three selectable reporting paths: LTE cellular only, IP only, or IP Primary with LTE cellular backup • Requires no change to the existing FACP configuration • Connects directly to the primary and secondary telephone ports of a DACT • Plan choices range from 5 minute, 60 minute, 6 hour, and 24 hour supervision intervals • Operates over the following communication protocols: LTE, HSPA+(4G) HSPA (3G) • Works over any type of customer provided Ethernet 10/100 based network connection (LAN or WAN), DSL model or cable modem • Data transmits over standard Contact ID protocol but is secured with the industry's advanced encryption standard (AES 256 bit) • Supports both dynamic (DHCP) or public and private Static IP addressing • Reliable connection: IP and cellular connection tested every day • Built-in, standalone power supply module. Onboard charging circuit design accommodates battery backup. Includes primary power and battery supervision • Diagnostic LEDs indicate signal strength and status • Choice of LTE provider services • QOS: Quality of Service diagnostics via AlarmNet conveys vital communicator information including signal strength, message path used, and when the message was received • 7720P Handheld programmer for easy setup Page 2 of 3 — DH-62010:B • 6/27/2019 The HWF2-COM LTE / IP fire communicators operate over the most modern and common cellular networks including LTE, 4G and3G. They connect to any customer provided Ethernet 10/100 base network connection (LAN or WAN), DSL or cable modem. Selectable reporting path feature allows the radios to be configured for a single or dual path, while providing appropriate supervision intervals based on NFPA 72 requirements. Selectable paths and supervision timing intervals include: OPERATION When an event occurs, the FACP goes off-hook to dial the central station. The HWF2-COM Series dialer capture module detects the off-hook condition and provides the fire panel with a dial tone. When the fire panel detects the dial tone, it begins dialing the central station. After the dialing is completed, the dialer capture module returns a signal to the fire panel. The fire panel then sends the Contact ID reports to the dialer capture module, which in turn sends a signal after the report is successfully received from the fire panel. The dialer capture nodule sends the Contact ID reports to the HWF2- COM Series communications module. When all the reports are sent, the fire panel goes on-hook. The HWF2-COM Series communications module then transmits the messages to the central station either over the LTE network or the Internet (depending on configuration). FIRE COMMUNICATOR / PANEL CAPABILITY The HWF2-COM Series is compatible with fire alarm control panels that use the Contact ID communications format as described in the SIA DC-05 standard. EASY TO PROGRAM The HWF2-COM communicator can be pre-programmed using the 7720P programmer to enter all central station information. This is saved to the HWF2-COM communicator panel memory. When the HWF2-COM is installed at the site and connected to the Internet/ Intranet, it registers with the AlarmNet Receiver. For most installations, the only required parameters are: • Primary City ID (two digits), obtained from your monitoring station • Primary Central Station ID (two digits), obtained from your monitoring station • Primary Subscriber ID (four digits), obtained from your monitoring station • Communication Module MAC ID, and MAC CRC number located on the outside of the box and inside of the module All parameters are assigned by the monitoring station. ALARMNET AlarmNet communications technology provides a highly reliable alternative for the transmission of alarm signals. The network provides extensive coverage in the United States and Canada. The AlarmNet Network Control Center processes signals from powerful servers in multiple locations equipped with 24/7 infrastructure support. Redundant hardware servers, real-time backup databases, and generators with battery backup at all locations ensure continuity of service. Signals from AlarmNet are transmitted to central station receivers using multiple communication paths consisting of the Internet, LTE radio network, or toll free plain old telephone service (POTS). Visit AlarmNet.com to learn more. INSTALLATION REQUIREMENTS, UL COMPLIANCE To meet UL864/NFPA requirements, ensure the following: • HWF2-COM Series must be installed in accordance with the National Fire Protection Association (NFPA) standards 70 and 72 • HWF2-COM Series must be mounted in the same room and within 20 feet of the fire panel. • HWF2-COM Series and all equipment used for the IP connection (e.g., router, hub, modem, etc) must be UL-listed, powered from an unswitched branch circuit, and be provided with appropriate standby power. • HWF2-COM Series must use the 7AH battery (not included) to provide 24 hour backup capability SELECTABLE PATH DESCRIPTION SUPERVISION TIMES 2010 Cell Single path, cellular 5 Minutes 2010 IP Single path, IP 5 Minutes 2010 IP & Cell Dual path, IP and cellular 24 Hours 2013 Cell Single path, cellular 60 Minutes 2013 IP Single path, IP 60 Minutes 2013 IP & Cell Dual path, IP and cellular 6 Hours HWF2-COM SERIES TECHNICAL SPECIFICATIONS DH-62010 | B | 06/19 ©2019 Honeywell International Inc. AlarmNet® is a registered trademarks of Honeywell International Inc. ©2019 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. Country of origin: USA ELECTRICAL Transformer: • Primary: 120VAC, 60Hz, 0.5A • Secondary: 18VDC, 50VA Battery: • One 12 V 7.0 AH lead-acid battery: (not supplied) • Battery charging current: 1 Amp maximum • Battery discharge current: Standby 230mA, Active 950mA CABINET SPECIFICATIONS • Dimensions: 14.875" H x 12.75" W x 3.0" D (37.8cm H x 32.4cm W x 7.6cm D) • Color: Red SHIPPING DIMENSIONS • Weight: 5.3 lbs (6.94kg) • Dimensions: 15.625" H x 13.79" W x 9.25" D (39.7cm H x 34.9cm W x 23.9cm D) TEMPERATURE AND HUMIDITY RANGES This system meets NFPA requirements for operation at 0 - 49°C/32-120°F and at a relative humidity 93%+- 2% RH (non- condensing at 32°C +- 2°C(90°F +-3°F). However the useful life of the system's standby batteries and the electronic components may be adversely affected by extreme temperature ranges and humidity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of 15 - 27°C/60-80°F. PRODUCT LINE INFORMATION HWF2V-COM: LTE Digital Cellular Fire Alarm Communicator and Internet Panel, Verizon LTE / IP HWF2A-COM: LTE Digital Cellular Fire Alarm Communicator and Internet Panel, AT&T LTE / IP Honeywell Power Products 12 Clintonville Road Northford, CT 06472-1610 203.484.7161 www.honeywellpower.com Both models include: • Red cabinet with key and lock • Wall outlet box • Dialer capture module • LTE communications module • Antenna and mounting adapter •PowerBoost1 power supply • LED display board •Transformer • Manual and required screws •Cables, etc. ANTENNA AND EXTERNAL HARDWARE CELL-ANT3DB: 3dBA gain antenna WA7626-CA: SMA to N adapter cable 7626-50HC: 50 ft. antenna cable, low loss Note: The WA7626-CA adapter cable and 7626-50HC antenna cable are only required when installing the CELL-ANT3DB antenna remotely. OTHER ACCESSORIES 7720P: HWF2V-COM, HWF2A-COM and IPGSM-4G handheld programmer HPTCOVER: Plug-in transformer box for HWF2V-COM, HWF2A-COM, and IPGSM- 4G communicators BAT-1270: Battery 12 Volts, 7AH, sealed AGENCY LISTINGS AND APPROVALS The listings and approvals below apply to the HWF2-COM Series communicators. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult the factory for latest listings. UL Listed: S789 CSFM: 7300-1645:0511 FDNY: Approved CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7300-1645:0511 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE:ADEMCO INC.2 Corporate Center Drive, Melville, NY 11747 Contact: Issa Khouryawad (516) 577-2312 Fax (516) 577-3540 Email: issa.khouryawad@resideo.com DESIGN: Models HWF2A-COM and HWF2V-Com Commercial Internet and LTE Communicator. The unit uses the Internet as its primary reporting path, and switches to cell service (secondary path as backup) when the Internet is not available. *The units are transmitters that captures DACT communication from a host panel and converts to IP and/or Cellular for transmission to the receiving station. Units also have the option for IP Only or Cellular only without a backup path. Refer to listee's product specification data sheets and installation, operation, and maintenance manual for detailed product description and operational considerations. RATING:Primary - 120 VAC, 60 Hz Secondary - 18 VAC, 5 VA INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as a control unit accessory for use with separately listed compatible commercial fire alarm control units. Refer to listee’s installation Instruction Manual for details. *Rev 08-01-19 gt July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator NFPA®Made In U.S.A. Space Age Electronics, Inc. www.1sae.com 800.486.1723 Toll Free 508.485.0966 Local 508.485.4740 Fax 2 Key ring hooks to hold system keys Business card holder for key contacts Overall Dimensions are 12” x 13” tall and 2 ¼ deep 16 gauge steel box and cover for security Durable powercoat baked on other colors available Standard ¾”cat 30 key lock other lock as- semblies available Solid stainless steel piano hinge Permanently screened white ink 1” high “Fire Alarm Documents” Legend sheet for passwords and system information FDB Standard Features: Space Age Electronics, Inc. 2013 ED0447 LT10505 Rev.B 1/2 FIRE DOCUMENT BOX The FDB is the perfect fit to meet the demanding code requirements today. SAE's number one goal is to manufacture code compliant solutions and this product allows you to do just that. NFPA 72 2010 section 6.2.2.1 states, "A record of installed software and firmware version numbers shall be maintained at the location of the fire alarm control unit." This durable 16 gauge steel enclosure with a solid piano hinge and key lock will keep all of your code required documents in one safe place. Along with your fire alarm software you can store your test & inspection documents, service records, manuals & AS built drawings for the system. The FDB is designed to hold critical manuals and documents with a durable steel retainer. It has designated hooks to organize key rings and hold important business cards for easy access and reference. Inside the cover it has a organized note table that allows for documentation for passwords and other critical system information. Space Age Electronics, Inc. 2008 Space Age Electronics, Inc. www.1sae.com 800.486.1723 Toll Free 508.485.0966 Local 508.485.4740 Fax Ordering Information: Part # Description SSU00672 Fire Document Box RED SSU00673 Custom screening with your Logo solutions (IAMEFAD) This document is subject to change without notice, see doc # ED0479 for legal disclaimer The fire alarm documents box (FDB) shall be constructed of 18 gauge cold rolled steel. It shall have a red powder coat epoxy finish. The cover shall be permanently screened with 1" high lettering "FIRE ALARM DOCUMENTS " with white indelible ink. The access door shall be locked with a 3/4" barrel lock and the hinge shall be a solid width 12" stainless steel piano hinge. The enclosure will supply 4 mounting holes. Inside the enclosure will accommodate standard 8 1/2 x 11 manuals and loose document records that will be protected within the enclosure. A legend sheet will be permanently attached to the door for system required documentation, key contacts and system information. The enclosure shall also provide 2 key ring holders with a location to mount standard business type cards for key contact personnel. Legend sheet for storing system information including contacts, sign-off , maintenance & test information, and alternate locations of additional records. Business Card Holder Key Ring Hooks Space Age Electronics, Inc. 58 Chocksett Road Sterling, MA 01564 800-486-1723 www.1sae.com For replacement forms order P/N: EA0316 (Qty. 10) LT10644 Rev. 1 Minimum Required Documentation (SIG-FUN) (Reference NFPA-72 2013 Section 7.2.1) 1 Written narrative providing intent and system description 2 Riser diagram 3 Floor plan layout showing location of all devices and control equipment 4 Sequence of operation in either an input/ output matrix or narrative form 5 Equipment technical data sheets 6 Manufacturers published instructions, including operation and maintenance instruction 7 Battery calculations (where batteries are provided) 8 Voltage drop calculations for notification appliance circuits 9 Completed record of inspection and testing in accordance with 7.6.6 and 7.8.2 10 Completed record of completion in accordance with 7.5.6 and 7.8.2 11 Copy of site specific software, where applicable 12 Record (as-built) drawings 13 Periodic inspection, testing, and maintenance documentation in accordance with Section 7.6 14 Records, record retention, and record maintenance in accordance with 7.7 Property Information Certifications and Approvals 16.1 System Installation Contractor: This system, as specified herein, has been installed and tested according to all NFPA standards cited herein. 16.5 Authority Having Jurisdiction: I have witnessed a satisfactory acceptance test of this system and find it to be installed and operating properly in accordance with its approved plans and specifications, with its approved sequence of operations, and with all NFPA standards cited herein. Equipment Information ED0447 LT10505 Rev.B 2/2 DF-61010:B • 71/2019 — Page 1 of 3 SD365 Series Addressable Photoelectric Smoke Detectors Addressable Devices DF-61010:B The Fire•Lite® Alarms SD365(A), SD365R(A), and SD365HT(A) intelli-gent plug-in smoke detectors are designed for both performance and aesthetics, and are direct replacements for the SD355 Series. A new modern, sleek, contemporary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. Exclusively for use with Fire•Lite’s addressable fire alarm control panels, the SD365(A) Series point ID capability allows each detec- tor’s address to be set with rotary, decimal address switches, provid- ing exact detector location for emergency personnel to quickly locate a fire during its early stages, potentially saving precious res- cue time while also reducing property damage. Two LEDs on each sensor light to provide a local, visible sensor indication. The SD365(A) Series also offers 135°F (57°C) fixed temperature thermal sensing on the SD365T(A) and a remote test capable detec- tor on the SD365R(A) for use with DNR(A)/DNRW duct smoke detector housings. Features SLC LOOP: • Two-wire SLC loop connection • Unit uses base for wiring • Compatible with LiteSpeed™ and CLIP protocol systems • Stable communication technique with noise immunity ADDRESSING: • Addressable by device • Rotary, decimal addressing (Refer to the Fire•Lite panel manuals for device capacity.) ARCHITECTURE: • Sleek, low-profile, stylish design •Unique single-source design to respond quickly and dependably to a broad range of fires • Integral communications and built-in device-type identification •Built-in tamper resistant feature •Remote test feature from the panel •Walk test with address display (an address on 121 will blink the detector LED: 12-[pause]-1(LiteSpeed systems only) •Built-in functional test switch activated by external magnet •Removable cover and insect-resistant screen for simple field cleaning •Expanded color options OPERATION: •Designed to meet UL 268 7th Edition •Factory preset at 1.5% nominal sensitivity for panel alarm thresh- old level •LED “blinks” when the unit is polled (communicating with the fire panel) and latches in alarm. •Low standby current MECHANICALS: •Sealed against back pressure •SEMS screws for wiring of the separate base •Designed for direct-surface or electrical-box mounting • Plugs into separate base for ease of installation and maintenance • Separate base allows interchange of photoelectric, ionization and thermal sensors OPTIONS: • Optional relay, isolator, and sounder bases Installation SD365 Series plug-in intelligent smoke detectors use a detachable base to simplify installation, service and maintenance. Installation instructions are shipped with each detector. Mount detector base (all base types) on an electrical backbox which is at least 1.5" (3.81 cm) deep. For a chart of compatible junction boxes, see DF-60059. NOTE: Because of the inherent supervision provided by the SLC loop, end-of-line resistors are not required. Wiring “T-taps” or branches are permitted for Style 4 (Class “B”) wiring only. When using relay or sounder bases, consult the I300(A) installation sheet I56-3626 for device limitations between isolator modules and iso- lator bases. Construction These detectors are constructed of fire-resistant plastic. The SD365 Series plug-in intelligent smoke detectors are designed to commer- cial standards and offer an attractive appearance. Operation Each SD365 Series detector uses one of the panel’s addresses (total limit is panel dependent) on the Fire•Lite Signaling Line Circuit (SLC). It responds to regular polls from the control panel and reports its type and the status. If it receives a test command from the panel (or a local magnet test), it stimulates its electronics and reports an alarm. It blinks its LEDs when polled and turns the LEDs on when commanded by the panel. The SD365 Series offers features and performance that represent the latest in smoke detector technology. Detector Sensitivity Test Each detector can have its sensitivity tested (required per NFPA 72, Chapter 14 on Inspection, Testing and Maintenance) when installed/ connected to an Fire•Lite addressable fire alarm control panel. The results of the sensitivity test can be printed for record keeping. Page 2 of 3 — DF-61010:B • 71/2019 Product Line Information NOTE: “-IV” suffix indicates CLIP and LiteSpeed device. NOTE: “A” suffix indicates Canadian version. SD365: White, low-profile intelligent photoelectric sensor, LiteSpeed only SD365A: Same as SD365 but with ULC listing SD365-IV: Ivory, low-profile intelligent photoelectric sensor SD365A-IV: Same as SD365-IV but with ULC listing SD365T: White, same as SD365 but includes a built-in 135°F (57°C) fixed-temperature thermal device, LiteSpeed only SD365TA: Same as SD365T but with ULC listing SD365T-IV: Ivory, same as SD365T but includes a built-in 135°F (57°C) fixed-temperature thermal device SD365TA-IV: Same as SD365T-IV but with ULC listing SD365R: White, low-profile intelligent photoelectric sensor, remote test capable, for use with DNR/DNRW, LiteSpeed only SD365RA: Same as SD365R but with ULC listing, for use with DNRA SD365R-IV: Ivory, low-profile intelligent photoelectric sensor, remote test capable, for use with DNR/DNRW SD365RA-IV: Same as SD365R-IV but with ULC listing, for use with DNRA INTELLIGENT BASES NOTE: For details on intelligent bases, see DF-60059. B300-6: White, 6” base, standard flanged low-profile mounting base (CSFM: 7300-1653:0109) B300-6-IV: Ivory,6” base, standard flanged low-profile mounting base (CSFM: 7300-1653:0109) B300A-6: Same as B300-6, ULC listed B300A-6-IV: Ivory, 6” standard flanged low-profile mounting base, ULC listed B300-6-BP: Bulk pack of B300-6, package contains 10 B501-WHITE: White, 4” standard European flangeless mounting base. UL/ULC listed (CSFM: 7300-1653:0109) B501-BL: Black, 4” standard European flangeless mounting base. UL/ULC listed (CSFM: 7300-1653:0109) B501-IV: Ivory color, 4” standard European flangeless mounting base. UL/ULC listed (CSFM: 7300-1653:0109) B501-WHITE-BP: Bulk pack of B501-WHITE contains 10 B224RB-WH: White, relay base (CSFM: 7300-1653:0216) B224RB-IV: Ivory, relay base (CSFM: 7300-1653:0216) B224RBA-WH: White, relay base, ULC listing B224RBA-IV: Ivory, relay base, ULC listing B224BI-WH: White, isolator detector base (CSFM: 7300-1653:0216) B224BI-IV: Ivory isolator detector base (CSFM: 7300-1653:0216) B224BIA-WH: White, isolator detector base, ULC listing B224BIA-IV: Ivory isolator detector base, ULC listing B200S-WH: White, Intelligent addressable sounder base capable of producing sound output in high or low volume with ANSI Temporal 3, ANSI Temporal 4, continuous tone, marching tone, and custom tone. Uses FlashScan protocol. (CSFM: 7300-1653:0213) B200S-IV: Ivory, Intelligent addressable sounder base capable of producing sound output in high or low volume with ANSI Temporal 3, ANSI Temporal 4, continuous tone, marching tone, and custom tone. Uses FlashScan protocol. (CSFM: 7300-1653:0213) B200SA-WH: Same as B200S-WH, ULC listing B200SA-IV: Same as B200S-IV, ULC listing B200SCOA-WH: White, Intelligent, programmable sounder base in English/French (required in Canada for ULC applications with CO Series detector applications B200SCOA-IV: Ivory Intelligent, programmable sounder base in English/French (required in Canada for ULC applications with CO Series detector applications, ULC listing B200S-LF-WH: White, Low Frequency Intelligent, programmable sounder base. Produces a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent; designed to meet the NFPA 72 sleeping space requirement. (CSFM: 7300-1653:0238) B200S-LF-IV: Ivory, Low Frequency Intelligent, programmable sounder base. Produces a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent; designed to meet the NFPA 72 sleeping space requirement. (CSFM: 7300-1653:0238) B200SR-WH: White, Intelligent sounder base capable of producing sound output with ANSI Temporal 3 or continuous tone. Intended for retrofit applications. (CSFM: 7300-1653:0213) B200SR-IV: Ivory, Intelligent sounder base capable of producing sound output with ANSI Temporal 3 or continuous tone. Intended for retrofit applications. (CSFM: 7300-1653:0213) B200SRA-WH: Same as B200SR-WH with, ULC listing B200SRA-IV: Same as B200SR-IV in Ivory color, ULC listing B200SR-LF-WH: White, Low Frequency Intelligent, programmable sounder base. Produces a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent; designed to meet the NFPA 72 sleeping space requirement. Intended for retrofit applica- tions. (CSFM: 7300-1653:0238) B200SR-LF-IV: Ivory, Low Frequency Intelligent, programmable sounder base. Produces a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent; designed to meet the NFPA 72 sleeping space requirement. Intended for retrofit applica- tions. (CSFM: 7300-1653:0238) MOUNTING KITS AND ACCESSORIES TR300: White, replacement flange for B210LP(A) base TR300-IV: Ivory, replacement flange for B210LP(A) base RA100Z(A): Remote LED annunciator. 3-32 VDC. Mounts to a U.S. single-gang electrical box. For use with B501(A) and B300-6(A). M02-04-00: Test magnet M02-09-00: Test magnet with telescoping handle CK300: Color Kit (includes cover and trim ring), white, 10-pack CK300-IV: Color Kit (includes cover and trim ring), ivory, 10-pack CK300-BL: Color Kit (includes cover and trim ring), black, 10-pack LiteSpeed™ is a trademark, and Fire•Lite® Alarms and System Sensor® are registered trademarks of Honeywell International Inc. ©2019 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Page 3 of 3 — DF-61010:B • 71/2019 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX:(877) 699-4105. www.firelite.com Country of Origin: Mexico SYSTEM SPECIFICATIONS Sensitivity: • UL Applications: 0.5% to 4.0% per foot obscuration. • ULC Applications: 0.5% to 3.5% per foot obscuration Size: 2.0" (5.3 cm) high; base determines diameter – B300-6: 6.1" (15.6 cm) diameter – B501: 4" (10.2 cm) diameter For a complete list of detector bases see DF-60983 Shipping weight: 3.4 oz. (95 g) Operating temperature range: • SD365: 32°F to 122°F (0°C to 50°C) • SD365T Series: 32°F to 100°F(0°C to 38°C) • SD365R Series installed in a DNR/DNRW, -4°F to 158°F (-20°C to 70°C) UL/ULC Listed Velocity Range: 0-4000 ft/min. (1219.2 m/min.), suitable for installation in ducts Relative humidity: 10% – 93% non-condensing Thermal ratings: fixed-temperature set point 135°F (57°C), rate-of- rise detection 15°F (8.3°C) per minute, high temperature heat 190°F (88°C) ELECTRICAL SPECIFICATIONS Voltage range: 15 - 32 volts DC peak Standby current (max. avg.): 200µA @ 24 VDC (one communica- tion every 5 seconds with LED enabled) Max current: 4.5 mA @ 24 VDC (“ON”) DETECTOR SPACING AND APPLICATIONS Fire•Lite recommends spacing detectors in compliance with NFPA 72. In low airflow applications with smooth ceiling, space detectors 30 feet (9.1m). For specific information regarding detector spacing, placement, and special applications refer to NFPA 72. A System Smoke Detector Application Guide, document A05-1003, is avail- able at www.systemsensor.com. Listings and Approvals Listings and approvals below apply to the SD365 Series detectors. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. • UL/ULC Listing: S1059 • FM Approved • CSFM: 7272-0075:0502 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7272-0075:0502 Page 1 of 1 CATEGORY: 7272 -- SMOKE DETECTOR-SYSTEM TYPE-PHOTOELECTRIC LISTEE:FIRE-LITE ALARMS INC.One Fire-Lite Place, Northford, CT 06410-1653 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models SD365, SD365R and SD365T analog addressable, photoelectric smoke detectors for open area and duct installations. Model SD365T has a complementary heat detector. All models are similarl except for population/depopulation of components on the Printed Wiring Board for the intended features. All above models may be followed by two digit Suffix indicating the color of the detector enclosure: no suffix for white, -IV for ivory, -BL for black. Refer to listee's Installation and Maintenance Instruction for additional detailed product description and operational considerations. RATING:24 VDC. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as photoelectric smoke detectors. Detectors are for use with separately listed System Sensor base Models *B501, *B210LP (CSFM Listing 7300-1653:0109), *B350LP (CSFM Listing 7300-0075:0192), B200S and B200SR (CSFM Listing 7300-1653:0213), B200S-LF and B200SR-LF (CSFM Listing 7300-1653:0238), B300-6 and B300-6-IS bases (CSFM Listing 7300-1653:0109), System Sensor duct detector housings Models DNR and DNRW (CSFM listing 3240-1653:0209), Fire-Lite duct detector housing Model D355PL (CSFM listing 3240-0075:0221) and separately listed compatible fire alarm control units. Refer to manufacturer’s Installation Manual for details. *All models comply with the applicable requirements in ANSI/UL 268, Smoke Detectors for Fire Alarm Systems, 7th Edition, January 11, 2016. NOTE: The photoelectric type detectors are generally more effective at detecting slow, smoldering fires that smolder for hours before bursting into flame. Sources of these fire may include cigarettes burning in the couched or bedding. The ionization type detectors are generally more effective at detecting fast, flaming fires that consume combustible materials rapidly and spread quickly. Sources of these fires include paper burning in a waste container or a grease fire in the kitchen. XLF:7272-0028:0503 *Revision 12-17-19 VWW July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator DF-60430:C2 • 12/18/2012 — Page 1 of 2 D355PL(A)/DNRW InnovairFlex Intelligent Non-Relay Photoelectric Duct Smoke Detector Intelligent Addressable Devices DF-60430:C2 • E-650 General The Fire•Lite InnovairFlex® D355PL(A) intelligent non-relay photoelectric duct smoke detector and DNRW watertight non- relay photoelectric duct smoke detector feature a pivoting housing that fits both square and rectangular footprints capa- ble of mounting to a round or rectangular duct. DNRW duct smoke detector, with its NEMA-4 rating, is listed as a watertight, UV resistant enclosure providing protection against falling dirt, rain, and windblown dust, splashing and hose directed water, allowing operators to use the detector in the most extreme environments. These units sense smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute (0.5 to 20.32 m/s), temperatures of -4°F to 158°F (-20°C to 70°C), and a humidity range of 0 to 95 percent (non-condensing.) An improved cover design isolates the sensor head, which allows for ease of maintenance. A cover tamper feature indi- cates a trouble signal for a removed or improperly installed sensor cover. The Fire•Lite InnovairFlex housing provides a 3/ 4-inch conduit knockout and ample space to facilitate easy wir- ing and mounting of a relay module. The Fire•Lite InnovairFlex duct smoke detector can be custom- ized to meet local codes and specifications without additional wiring. The new InnovairFlex product line is compatible with all previous Innovair models, including remote test accessories. Features • Photoelectric, integrated low-flow technology. • Air velocity rating from 100 ft/min to 4,000 ft/min (0.5 m/s to 20.32 m/s). • Versatile mounting options: square or rectangular configu- ration. • Broad ranges for operating temperature (-4°F to 158°F, - 20°C to 70°C) and humidity (0% to 95% non-condensing). • Patented sampling tube installs from front or back of the detector with no tools required. • Cover tamper signal. • Increased wiring space with a newly added 3/4” conduit knockout. • Available space within housing to accommodate mounting of a relay module. • Easily accessible code wheels on sensor head (sold sepa- rately). • Clear cover for convenient visual inspection. • Remote testing capability. • Requires com line power only. • Accommodates the installation of an addressable relay module, sold separately, (CRF-300) for applications requir- ing a Form-C relay. Specifications Size: (Rectangle) 14.38 in (37 cm) Length; 5 in (12.7 cm) Width, 2.5 in (6.6 cm) Depth. Size: (Square) 7.75 in (19.7 cm) Length; 9 in (22.9 cm) Width; 2.5 in (6.35 cm) Depth. Weight: 1.6 lb (0.73 kg). Operating Temperature Range: -4°F to 158°F (-20°C to 70°C). Storage Temperature Range: -22°F to 158°F (-30°C to 70°C). Operating Humidity Range: 0% to 95% relative humidity (non-condensing). Air Duct Velocity: 100 to 4,000 ft/min (0.5 to 20.32 m/s). Accessories Fire•Lite provides system flexibility with a variety of accesso- ries, including two remote test stations and different means of visible and audible system annunciation. As with our duct smoke detectors, all duct smoke detectors accessories are UL listed. D355PLs and DNRWs with a date code of 0013 or higher do not require external 24VDC for remote test applications when used with a remote-test-capable detector. ACCESSORY CURRENT LOADS AT 24 VDC Agency Listings and Approvals Consult product manual for lists of compatible UL-Listed devices. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Con- sult factory for latest listing status. •UL: S1059. •ULC: S1059 Device Standby Alarm RA100Z 0mA 12 mA Max RTS151/ RTS151KEY 0mA 12mA Max intelligent innovair- Page 2 of 2 — DF-60430:C2 • 12/18/2012 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com Fire•Lite® Alarms is a registered trademark of Honeywell International Inc.  ©2012 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Made in the U.S. A. •CSFM: 3242-1653:0209. • FM approved. Product Line Information D355PL: Intelligent non-relay photoelectric low flow smoke detector housing. Includes SD355R Detector. DNRW: Watertight intelligent non-relay photoelectric low flow duct smoke detector housing. Does not include detector head. SD355R(A): Remote test capable addressable low-profile photoelectric smoke detector. SD355(A): Addressable low-profile photoelectric smoke detec- tor. DCOIL: Remote test coil. Required for older DNR(W) duct detector housing. DST1: Metal sampling tube duct width up to 1 ft (0.3m). DST1.5: Metal sampling tube duct widths up to 1 ft to 2 ft (0.3 to 0.6 m). DST3: Metal sampling tube duct widths up to 2 ft to 4 ft (0.6 to 1.2 m). DST5: Metal sampling tube duct widths up to 4 ft to 8 ft (1.2 to 2.4 m). DST10: Metal sampling tube duct widths up to 8 ft to 12 ft (2.4 to 3.7 m). DH400OE-1: Weatherproof enclosure. ETX: Metal exhaust tube duct, width 1 ft (0.3 m). M02-04-00: Test magnet. P48-21-00: End cap for metal sampling tubes. RA100Z: Remote annunciator alarm LED. RTS151: Remote test station. RTS151KEY: Remote test station with key lock. Important Note • DNRW duct detector housings with a date code of 0013 or higher do not require a DCOIL or auxiliary 24 VDC for remote test applications when used with a remote test capable detector. • DNRW duct detector housings with a date code of 0012 or earlier require a DCOIL and auxiliary 24 VDC power for remote test applications. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.3240-0075:0221 Page 1 of 1 CATEGORY: 3240 -- DUCT SMOKE DETECTOR HOUSING/BASE LISTEE:FIRE-LITE ALARMS INC.One Fire-Lite Place, Northford, CT 06410-1653 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Model *D355PL analog photoelectric duct smoke detector housing. Unit consists of a duct detector housing, exhaust tubes, and separately listed Fire-Lite Alarms’ Model SD355 or SD355R detector heads (OSFM Listing No. 7272-0075:194). Refer to listee's data sheet for additional detailed product description and operational considerations. RATING:24 VDC INSTALLATION: In accordance with listee's printed installation instruction, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, rating, air velocity and UL label. APPROVAL: Listed as conventional photoelectric duct smoke detector housing for use with separately listed fire alarm control units. Refer to listee’s Installation Instruction Manual for details. XLF:3240-1653:0209 01-02-18 gt July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator DF-52013:D • 4/13/2012 — Page 1 of 2 BG-12LX Addressable Manual Pull Station Addressable Devices DF-52013:D • E-100 FLPullStation.jpgGeneral The Fire·Lite BG-12LX is a state-of-the-art, dual-action (i.e., requires two motions to activate the station) pull station that includes an addressable interface (mounted inside) for Fire·Lite’s addressable fire alarm control panels (FACPs) Because the BG-12LX is addressable, the control panel can display the exact location of the activated manual station. This leads fire personnel quickly to the location of the alarm. Features • Maintenance personnel can open station for inspection and address setting without causing an alarm condition. • Built-in bicolor LED, which is visible through the handle of the station, flashes in normal operation and latches steady red when in alarm. • Handle latches in down position and the word “ACTIVATED” appears to clearly indicate the station has been operated. • Captive screw terminals wire-ready for easy connection to SLC loop (accepts up to 12 AWG/3.25 mm² wire). • Can be surface mounted (with SB-10 or SB-I/O) or semi- flush mounted. Semi-flush mount to a standard single- gang, double-gang, or 4" (10.16 cm) square electrical box. • Smooth dual-action design. • Meets ADAAG controls and operating mechanisms guide- lines (Section 4.1.3[13]); meets ADA requirement for 5 lb. maximum activation force. • Highly visible. • Attractive shape and textured finish. • Key reset. • Includes Braille text on station handle. • Optional trim ring (BG12TR). • Meets UL 38, Standard for Manually Actuated Signaling Boxes. Construction Shell, door, and handle are molded of durable polycarbonate material with a textured finish. Specifications •Shipping Weight: 9.6 oz. (272.15 g) •Normal operating voltage: 24 VDC. •Maximum SLC loop voltage: 28.0 VDC. •Maximum SLC standby current: 375 A. •Maximum SLC alarm current: 5 mA. •Temperature Range: 32°F to 120°F (0°C to 49°C) •Relative Humidity: 10% to 93% (noncondensing) •For use indoors in a dry location Installation The BG-12LX will mount semi-flush into a single-gang, double- gang, or standard 4" (10.16 cm) square electrical outlet box, or will surface mount to the model SB-10 or SB-I/O surface back- box. If the BG-12LX is being semi-flush mounted, then the optional trim ring (BG12TR) may be used. The BG12TR is usually needed for semi-flush mounting with 4" (10.16 cm) or double-gang boxes (not with single-gang boxes). Operation Pushing in, then pulling down on the handle causes it to latch in the down/activated position. Once latched, the word “ACTI- VATED” (in bright yellow) appears at the top of the handle, while a portion of the handle protrudes from the bottom of the station. To reset the station, simply unlock the station with the key and pull the door open. This action resets the handle; clos- ing the door automatically resets the switch. Each manual station, on command from the control panel, sends data to the panel representing the state of the manual switch. Two rotary decimal switches allow address settings (1 – 159 with Breakaway Tab removed for MS-9600 Series, 1 – 99 and MS-9200UDLS, 1 – 50 for MS-9050UD). Architectural/Engineering Specifications Manual Fire Alarm Stations shall be non-coded, with a key- operated reset lock in order that they may be tested, and so designed that after actual Emergency Operation, they cannot be restored to normal except by use of a key. An operated sta- tion shall automatically condition itself so as to be visually detected as activated. Manual stations shall be constructed of red-colored polycarbonate material with clearly visible operat- ing instructions provided on the cover. The word FIRE shall appear on the front of the stations in white letters, 1.00 inches (2.54 cm) or larger. Stations shall be suitable for surface mounting on matching backbox SB-10 or SB-I/O; or semi-flush mounting on a standard single-gang, double-gang, or 4" (10.16 cm) square electrical box, and shall be installed Page 2 of 2 — DF-52013:D • 4/13/2012 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com FireLite® Alarms® is a registered trademark of Honeywell International Inc. ©2012 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Made in the U.S. A. within the limits defined by the Americans with Disabilities Act (ADA) or per national/local requirements. Manual Stations shall be Underwriters Laboratories listed. Manual stations shall connect with two wires to one of the con- trol panel SLC loops. The manual station shall, on command from the control panel, send data to the panel representing the state of the manual switch. Manual stations shall provide address setting by use of rotary decimal switches. Product Line Information BG-12LX: Dual-action addressable pull station. Includes key locking feature. (Listed for Canadian and non-Canadian appli- cations.) SB-10: Surface backbox; metal. SB-I/O: Surface backbox; plastic. BG12TR: Optional trim ring. 17003: Keys, set of two. Agency Listings and Approvals In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in pro- cess. Consult factory for latest listing status. •UL/ULC Listed: S711 (listed for Canadian and non-Cana- dian applications). •MEA: 67-02-E. •CSFM: 7150-0075:0184. • FM Approved. Patented: U.S. Patent No. D428,351; 6,380,846; 6,314,772; 6,632,108. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7150-0075:0184 Page 1 of 1 CATEGORY: 7150 -- FIRE ALARM PULL BOXES LISTEE:FIRE-LITE ALARMS INC.One Fire-Lite Place, Northford, CT 06410-1653 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models BG-12, BG-12S, BG-12NC, BG-12W, BG-12LW, BG-12WP, BG-12LWP, BG-12L, BG-12LX, BG-12LA, BG-12PS, BG-12LSP, BG-12SP, BG-12LR, BG-12LRA, BG-12LAO, BG-12LAOB, BG-12-LO, BG-12LOB, BG-12LPS, BG-12LPSP, BG-12SL, UT-PS1 and UT-PS2 fire alarm pull boxes. The BG-12 series is a dual action pull station that has normally open switch contacts. Refer to listee's data sheet for detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number and UL label. APPROVAL: Listed as fire alarm boxes for use with separately listed compatible fire alarm control units. Models BG-12WP, BG-12W, BG-12LW and BG-12LWP are intended for outdoor use when installed with Model WP-10 back box. Models BG-LAOB and BG-12LOB are intended for outdoor use when installed with Model WBB or WP-10 back box. * These manual pull boxes meet the requirements of UL Standard 38, 1999 Edition and California amendments. XLF:7150-0028:0199 *Updated 08-17-09 fm July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator DF-52121:E • 07/30/2015 — Page 1 of 4 MMF-300(A) Series, MDF-300 Addressable Monitor Modules Addressable Devices DF-52121:E • E-325 General Four different monitor modules are available for Fire•Lite’s intelligent control panels to suit a variety of applications. Moni- tor modules are used to supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors (MMF-302(A)). MMF-300(A) is a standard-sized module (typically mounts to a 4" [10.16 cm] square box) that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices. MMF-301(A) is a miniature monitor module a mere 1.3" (3.302 cm) H x 2.75" (6.985 cm) W x 0.65" (1.651 cm) D that super- vises a Style B (Class B) circuit of dry-contact input devices. Its compact design allows the MMF-301(A) to be mounted in a single-gang box behind the device it monitors. MMF-302(A) is a standard-sized module used to monitor and supervise compatible two-wire, 24 volt, smoke detectors on a Style D (Class A) or Style B (Class B) circuit. MDF-300(A) is a standard-sized dual monitor module used to monitor and supervise two independent two-wire Style B (Class B) dry-contact initiating device circuits (IDCs) at two separate, consecutive addresses in intelligent, two-wire sys- tems. LiteSpeed™ is a communication protocol developed by Fire•Lite Engineering that greatly increases the speed of com- munication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of other communication protocols. MMF-300(A) Monitor Module • Built-in type identification automatically identifies this device as a monitor module to the control panel. • Powered directly by two-wire SLC loop. No additional power required. • High noise (EMF/RFI) immunity. • SEMS screws with clamping plates for ease of wiring. • Direct-dial entry of address: 01 – 159 on MS-9600 series panels, 01 – 99 on other compatible systems. • LED flashes during normal operation and latches on steady to indicate alarm. The MMF-300(A) Monitor Module is intended for use in intelli- gent, two-wire systems, where the individual address of each module is selected using the built-in rotary switches. It pro- vides either a two-wire or four-wire fault-tolerant Initiating Device Circuit (IDC) for normally-open-contact fire alarm and supervisory devices. The module has a panel-controlled LED indicator. The MMF-300(A) can be used to replace M300(A) modules in existing systems. MMF-300(A) APPLICATIONS Use to monitor a zone of four-wire smoke detectors, manual fire alarm pull stations, waterflow devices, or other normally- open dry-contact alarm activation devices. May also be used to monitor normally-open supervisory devices with special supervisory indication at the control panel. Monitored circuit may be wired as an NFPA Style B (Class B) or Style D (Class A) Initiating Device Circuit. A 47K Ohm End-of-Line Resistor (provided) terminates the Style B circuit. No resistor is required for supervision of the Style D circuit. MMF-300(A) OPERATION Each MMF-300(A) uses one of the available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/nor- mal/short) of its Initiating Device Circuit (IDC). A flashing LED indicates that the module is in communication with the control panel. The LED latches steady on alarm (subject to current limitations on the loop). MMF-300(A) SPECIFICATIONS Nominal operating voltage: 15 to 32 VDC. Maximum current draw: 5.0 mA (LED on). Average operating current: 375 μA (LED flashing), 1 com- munication every 5 seconds, 47k EOL. Maximum IDC wiring resistance: 1500 Ohms. Maximum IDC Voltage: 11 Volts. EOL resistance: 47K Ohms. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% noncondensing. Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep box. MMF-301(A) Mini Monitor Module • Built-in type identification automatically identifies this device as a monitor module to the panel. • Powered directly by two-wire SLC loop. No additional power required. • High noise (EMF/RFI) immunity. MMF-300(A) (Type H)6999cov.jpg Page 2 of 4 — DF-52121:E • 07/30/2015 • Tinned, stripped leads for ease of wiring. • Direct-dial entry of address: 01 – 159 on MS-9600 series panels, 01 – 99 on other compatible systems The MMF-301(A) Mini Monitor Module can be installed in a single-gang junction directly behind the monitored unit. Its small size and light weight allow it to be installed without rigid mounting. The MMF-301(A) is intended for use in intelligent, two-wire systems where the individual address of each module is selected using rotary switches. It provides a two-wire initiat- ing device circuit for normally-open-contact fire alarm devices. The MMF-301(A) can be used to replace M301(A) modules in existing systems. MMF-301(A) APPLICATIONS Use to monitor a single device or a zone of four-wire smoke detectors, manual fire alarm pull stations, waterflow devices, or other normally-open dry-contact devices. May also be used to monitor normally-open supervisory devices with special supervisory indication at the control panel. Monitored circuit/ device is wired as an NFPA Style B (Class B) Initiating Device Circuit. A 47K Ohm End-of-Line Resistor (provided) terminates the circuit. MMF-301(A) OPERATION Each MMF-301(A) uses one of the available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/nor- mal/short) of its Initiating Device Circuit (IDC). MMF-301(A) SPECIFICATIONS Nominal operating voltage: 15 to 32 VDC. Average operating current: 350 μA, 1 communication every 5 seconds, 47k EOL; 600 μA Max. (Communicating, IDC Shorted). Maximum IDC wiring resistance: 1500 Ohms. Maximum IDC Voltage: 11 Volts. Maximum IDC Current: 450 μA. EOL resistance: 47K Ohms. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% noncondensing. Dimensions: 1.3" (3.302 cm) high x 2.75" (6.985 cm) wide x 0.65" (1.651 cm) deep. Wire length: 6" (15.24 cm) minimum. MMF-302(A) Interface Module • Supports compatible two-wire smoke detectors. • Supervises IDC wiring and connection of external power source. • High noise (EMF/RFI) immunity. • SEMS screws with clamping plates for ease of wiring. • Direct-dial entry entry of address: 01 – 159 on MS-9600 series panels, 01 – 99 on other compatible systems. • LED flashes during normal operation. • LED latches steady to indicate alarm on command from control panel. The MMF-302(A) Interface Module is intended for use in intelli- gent, addressable systems, where the individual address of each module is selected using built-in rotary switches. This module allows intelligent panels to interface and monitor two- wire conventional smoke detectors. It transmits the status (normal, open, or alarm) of one full zone of conventional detectors back to the control panel. All two-wire detectors being monitored must be UL compatible with the module. The MMF-302(A) can be used to replace M302(A) modules in existing systems. MMF-302 (A) APPLICATIONS Use the MMF-302(A) to monitor a zone of two-wire smoke detectors. The monitored circuit may be wired as an NFPA Style B (Class B) or Style D (Class A) Initiating Device Circuit. A 3.9 K Ohm End-of-Line Resistor (provided) terminates the end of the Style B or D (class B or A) circuit (maximum IDC loop resistance is 25 Ohms). Install ELR across terminals 8 and 9 for Style D application. MMF-302(A) OPERATION Each MMF-302(A) uses one of the available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/nor- mal/short) of its Initiating Device Circuit (IDC). A flashing LED indicates that the module is in communication with the control panel. The LED latches steady on alarm (subject to current limitations on the loop). MMF-302(A) SPECIFICATIONS Nominal operating voltage: 15 to 32 VDC. Maximum current draw: 5.1 mA (LED on). Maximum IDC wiring resistance: 25 Ohms. Average operating current: 270 μA, 1 communication and 1 LED flash every 5 seconds, 3.9k eol. EOL resistance: 3.9K Ohms. External supply voltage (between Terminals T10 and T11): • DC voltage: 24 volts power limited. • Ripple voltage: 0.1 Vrms maximum. • Current: 90 mA per module maximum. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% noncondensing. Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep box. MDF-300(A) Dual Monitor Module The MDF-300(A) Dual Monitor Module is intended for use in intelligent, two-wire systems. It provides two independent two- wire initiating device circuits (IDCs) at two separate, consecutive addresses. It is capable of monitoring normally open contact fire alarm and supervisory devices. The module has a single panel- controlled LED.6720m101.wmf DF-52121:E • 07/30/2015 — Page 3 of 4 NOTE: The MDF-300(A) provides two Style B (Class B) IDC cir- cuits ONLY. Style D (Class A) IDC circuits are NOT supported in any application. MDF-300(A) SPECIFICATIONS Normal operating voltage range: 15 to 32 VDC. Maximum current draw: 6.4 mA (LED on). Average operating current: 750 μA (LED flashing). Maximum IDC wiring resistance: 1,500 Ohms. Maximum IDC Voltage: 11 Volts. Maximum IDC Current: 240 μA EOL resistance: 47K Ohms. Temperature range: 32° to 120°F (0° to 49°C). Humidity range: 10% to 93% (non-condensing). Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep box. MDF-300(A) AUTOMATIC ADDRESSING The MDF-300(A) automatically assigns itself to two address- able points, starting with the original address. For example, if the MDF-300(A) is set to address “26”, then it will automati- cally assign itself to addresses “26” and “27”. NOTE: “Ones” addresses on the MDF-300(A) are 0, 2, 4, 6, or 8 only. Terminals 6 and 7 use the first address, and terminals 8 and 9 use the second address. Installation MMF-300(A), MMF-302(A), and MDF-300(A) modules mount directly to a standard 4" (10.16 cm) square, 2.125" (5.398 cm) deep, electrical box. They may also be mounted to the SMB500 surface-mount box. Mounting hardware and installa- tion instructions are provided with each module. All wiring must conform to applicable local codes, ordinances, and regu- lations. These modules are intended for power-limited wiring only. The MMF-301(A) module is intended to be wired and mounted without rigid connections inside a standard electrical box. All wiring must conform to applicable local codes, ordinances, and regulations. Agency Listings and Approvals In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult fac- tory for latest listing status. •UL: S2424. •ULC: S2424. •FM Approved. •CSFM: 7300-0075:0185. •MEA: 72-01-E. Product Line Information NOTE: “A” suffix indicates ULC-listed model. MMF-300(A): Monitor module. MMF-301(A): Monitor module, miniature. MMF-302(A): Monitor module, two-wire detectors. MDF-300(A): Monitor module, dual, two independent Class B circuits. SMB500: Optional surface-mount backbox. NOTE: See installation instructions and refer to the SLC Wiring Manual, PN 51309. Architects’/Engineers’ Specifications Specifications of these devices and all FireLite products are available from FireLite. CAUTION: Avoid duplicating addresses on the system. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7300-0075:0185 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE:FIRE-LITE ALARMS INC.One Fire-Lite Place, Northford, CT 06410-1653 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models MDF-300, MMF-301, MMF-300, MMF-302, MCF-300 monitor modules; Models CRF-300 and CMF-300 control modules; and MMF-302-6 six zone interface signaling device module. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING:15-32 VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model designation, electrical rating, and UL label. APPROVAL: Listed as control unit accessories for use with listee's separately listed electrically compatible fire alarm control units. NOTE: *Rev. 05-06-05 JW July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator df-60379:A1 • 08/04/09 — Page 1 of 2 CRF-300(A) Relay Module Addressable Devices df-60379:A1 • E-400 General The CRF-300(A) Addressable Relay Module provides the sys- tem with a dry-contact output for activating a variety of auxil- iary devices, such as fans, door holders, dampers, control equipment, etc. Addressability allows the dry contact to be activated through panel programming, on a select basis. LiteSpeed™ is a communication protocol developed by Fire•Lite Engineering that greatly enhances the speed of com- munication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of other designs. Features • Built-in type identification automatically identifies these devices to the control panel. • Internal circuitry and relay powered directly by two-wire SLC loop. • Integral LED “blinks” green each time a communication is received from the control panel and turns on in steady red when activated. • High noise immunity (EMF/RFI). • Wide viewing angle of LED. • SEMS screws with clamping plates for wiring ease. • Direct-dial entry of address: 01– 159 for MS-9600(A) series panels, 01 – 99 on MS-9200UDLS(A) and MS-9050UD(A). Applications The CRF-300(A) may be programmed to operate dry contacts for door holders, Air Handling Unit shutdown, etc., and to reset four-wire smoke detector power. Construction • The face plate is made of off-white heat-resistant plastic. • Controls include two rotary switches for direct-dial entry of address setting. • The CRF-300(A) is configured for a single Class B (Style Y) or Class A (Style Z) Notification Appliance Circuit. • The CRF-300(A) provides two Form-C dry contacts that switch together. Operation Each CRF-300(A) uses one of the addresses on a SLC loop. It responds to regular polls from the control panel and reports its type and status, including the open/normal/short status of its Notification Appliance Circuit (NAC). The LED blinks with each poll received. On command, it activates its internal relay. NOTE: Open/short supervision is suspended with the CRF-300. Rotary switches set a unique address for each module. The address may be set before or after mounting. The built-in TYPE CODE (not settable) will identify the module to the con- trol panel, so as to differentiate between a control module and a relay module. Specifications Normal operating voltage: 15 to 32 VDC. Maximum SLC current draw: 6.5 mA (LED on). Average operating current: 230 A direct poll (CLIP mode), 255 A group poll (LiteSpeed mode) with LED flashing. EOL resistance: not used. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% non-condensing. Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 mm) deep box. Relay Contact Ratings Load Description Application Maximum Voltage Current Rating Resistive Non-Coded 30 VDC 3.0 A Resistive Coded 30 VDC 2.0 A Resistive Non-Coded 110 VDC 0.9 A Resistive Non-Coded 125 VAC 0.9 A Inductive (L/R=5ms) Coded 30 VDC 0.5 A Inductive (L/R=2ms) Coded 30 VDC 1.0 A Inductive (PF=0.35) Non-Coded 125 VAC 0.5 A CRF-300(A)60379cov.jpg Page 2 of 2 — df-60379:A1 • 08/04/09 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com LiteSpeed™ is a trademark and Fire•Lite® Alarms is a registered trademark of Honeywell International Inc. ©2009 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Made in the U.S. A. Agency Listings and Approvals In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult fac- tory for latest listing status. •UL: S2424 •ULC: S2424 • FM approved •CSFM: 7300-0075:185 •MEA: 72-01-E Product Line Information CRF-300(A): Intelligent addressable relay module. : Intelligent addressable relay module, ULC listed model. SMB500: Optional surface-mount backbox. NOTE: For installation instructions, see document I56-1190-005 and refer to the SLC Wiring Manual, document 51309. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7300-0075:0185 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE:FIRE-LITE ALARMS INC.One Fire-Lite Place, Northford, CT 06410-1653 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models MDF-300, MMF-301, MMF-300, MMF-302, MCF-300 monitor modules; Models CRF-300 and CMF-300 control modules; and MMF-302-6 six zone interface signaling device module. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING:15-32 VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model designation, electrical rating, and UL label. APPROVAL: Listed as control unit accessories for use with listee's separately listed electrically compatible fire alarm control units. NOTE: *Rev. 05-06-05 JW July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator Agency Listings S2522 3034401 7300-1653:0212 7300-1653:0211 7135-1653:0196 9080301 Duct Smoke Detector Accessories Expand the versatility of the InnovairFlex™ line of duct smoke detectors with System Sensor notification and test accessories. Available Accessories APA151 Piezo Annunciator MHR Mini-Horn, Red MHW Mini-Horn, White RA100Z/RA100ZA Remote Annunciator RTS151 Remote Test Station RTS151KEY Remote Test Station with Key RTS2 Multi-Signaling Accessory AOS Add-On Strobe RTS2-AOS Multi-Signaling Accessory Duct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options. All System Sensor duct smoke detectors and accessories are UL listed. The APA151 piezo annunciator, which replaces the APA451 with a new, improved look, provides an audible alarm signal, a red LED to indicate alarm status, and a green LED to indicate power status. It is intended for use with System Sensor 4-wire conventional duct smoke detector applications without a system control panel, to comply with NFPA 90A. The MHR and MHW SpectrAlert® Advance mini-horns feature temporal or continuous tones at high and low volume settings. Their small footprint allows mounting to single-gang back boxes for applications where a small device is desired. The RA100Z and RA100ZA remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition. The RTS151 and RTS151KEY remote test stations are automatic fire detector accessories designed to test duct smoke detectors from a convenient location. For 4-wire detectors, the RTS151KEY test station features a multi-colored LED that alternates between steady green and red. For 2-wire detectors, the LED illuminates red for alarm. The RTS2 and RTS2-AOS multi-signaling accessories are designed to work with InnovairFlex 4-wire conventional duct smoke detectors. These accessories include a key switch that can be used to select one of two connected sensors to be tested, reset, or both by a push button switch. They also enable sensitivity measurements using the SENS-RDR sensitivity reader (sold separately). The AOS (Add-On Strobe) is an optional accessory included with the RTS2- AOS model. 3825 Ohio Avenue • St. Charles, IL 60174 Phone: 800-SENSOR2 • Fax: 630-377-6495 www.systemsensor.com ©2013 System Sensor. Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. HVDS20202 • 8/13 APA151 Piezo Annunciator Voltage Regulated 24 VDC Operating Voltage 16 to 33 VDC Maximum Alarm Current 30 mA Temperature Range 0°C to 49°C (32°F to 120°F) Relative Humidity 10 to 93% non-condensing Wire Gauge 12 to 18 AWG Dimensions 4.6˝ H × 2.9˝ W × .45˝ D MHR/MHW SpectrAlert® Advance Mini-Horns Voltage Regulated 12 DC or FWR (Full Wave Rectified) or Regulated 24 VDC or FWR Sounder Current Draw 22 mA RMS max. at 8 to 17.5 Volts DC 29 mA RMS max. at 16 to 33 Volts DC Temperature Range 0°C to 49°C (32°F to 120°F) Humidity Range 10 to 93% non-condensing Nominal Sounder Frequency 3 kHz Wire Gauge 12 to 18 AWG Dimensions 4.6˝ H × 2.9˝ W × 0.45˝ D RA100Z/RA100ZA Remote Annunciator Voltage Range Conventional System: 3.1 to 32 VDC Intelligent System: 18 to 32 VDC Maximum Alarm Current 10 mA Dimensions 4.6 ˝ H × 2.8˝ W × 1.3˝ D Specifications, Duct Smoke Detector Accessories RTS151 Remote Test Station Power Requirements Alarm LED: 2.8 to 32 VDC, 12 mA max. Total Current: 105 mA max. Test Switch 10 VA @ 32 VDC Reset Switch 10 VA @ 32 VDC Alarm Response Time 40 seconds max. Temperature Range –10°C to 60°C (14°F to 140°F) Relative Humidity 95% non-condensing Wire Gauge 14 to 18 AWG Dimensions 4.8˝ H x 2.90˝ W x 1.4˝ D RTS151KEY Remote Test Station with Key Power Requirements Power LED (Green): 14 to 35 VDC, 12 mA max. Alarm LED (Red): 2.8 to 32 VDC, 12 mA max. Total Current: 105 mA max. Alarm Response Time 40 seconds max. Temperature Range –10°C to 60°C (14°F to 140°F) Relative Humidity 95% non-condensing Wire Gauge 14 to 18 AWG Dimensions 4.6˝ H × 2.75˝ W × 1.8˝ D RTS2 and RTS2-AOS Multi-signaling Accessory Voltage 20 to 29 VDC Power Requirements Standby: 3.0 mA max. Trouble: 16.0 mA max. Alarm without strobe: 30 mA max. Alarm with strobe: 55 mA max. Sounder 85 dBA at ten feet Temperature Range –10°C to 60°C (14°F to 140°F) Relative Humidity 95% non-condensing Wire Gauge 14 to 22 AWG Dimensions 4.8˝ W x 5.3˝ H x 1.6˝ D For the very latest product specifications and listing information, please visit the System Sensor Web site at www.systemsensor.com. RTS151 UL S4011 RA100Z UL S2522 RTS151KEY UL S2522 MHW UL S4011 MHR UL S4011 APA151 UL S4011 RTS2-AOS UL S2522 AOS CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7300-1653:0212 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE:System Sensor, Unincorporated Div of Honeywell Int'l Inc.3825 Ohio Ave, St. Charles, IL 60174 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models RTS151, RTS151KEY and RA100Z Duct Smoke Detector accessories. Refer to listee's data sheet for detailed product description and operational considerations. RATING:Refer to the installation manuals. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as control unit accessories for use with separately listed compatible fire alarm control units. Refer to listee’s Installation Instruction Manual for details. 04-03-09 bh July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator FIRE PRODUCTS For more information, call 1-800-888-4784 (4STI) or visit www.sti-usa.com KEY FEaTURES General Information · Proven effective for more than 35 years in helping stop false fire alarms without restricting legitimate alarms. · Can be used as a guard against physical damage to a manual pull station, with or without the optional warning horn. · Three year guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components). Design · Larger sizes and surface mounted pull stations accommodated with STI-3100 conduit spacer. · Weather models have closed cell gaskets. · The Stopper II design is a registered trademark of Safety Technology International, Inc. Construction · UL Listed to U.S. and Canadian safety standards (also for custom labeling). Installation · When covering a pull station outside, UL requires stations to be listed for outdoor use. · Typical working properties of polycarbonate are -40° to 250°F (-40° to 121°C). Electronics · Power source is a 9V DC alkaline battery included on standard Stopper II (remote powered unit available). Options · Optional horn has a choice of 95 or 105 dB at one foot. · Standard red units have “In Case of Fire...” label unless specified with “no label” or “custom label” (extra charge for custom label). PRODUCT OVERVIEW This protective cover has been helping to stop false fire alarms around the world for more than 35 years, without restricting legitimate alarms. all models offer excellent protection against physical damage (both accidental and intentional) and several against severe environments both inside and out. It is ideal for schools, colleges, hospitals, nursing homes, stores, hotels and public buildings of almost every kind where there is a threat of false alarms. hOW IT WORKS Stopper II consists of a clear, tamperproof, tough polycarbonate shield and frame, but the line includes models with the option of a piezo horn, spacer, Form “C” dry relay contact and gaskets. The cover accommodates most manual pull stations. When the Stopper II with horn is lifted to gain access to the protected alarm, a piercing self- contained 95 or 105 dB warning horn (at one foot) sounds. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it drops off of the frame and a horn will sound (models with horn) until the cover is snapped back onto the frame or for the life of the battery. STI STOPPER II® STI-1100 ADACompliant ADACompliantSEE REVERSE FOR DETAILS ® Printed in U.S.a., © 1987-2009 Safety Technology International, Inc. 2306 Airport Road Waterford, Michigan 48327, USA Tel: 248-673-9898 Fax: 248-673-1246 Toll-free: 800-888-4784 info@sti-usa.com www.sti-usa.com Unit 49G Pipers Road Park Farm Industrial Estate Redditch, Worcestershire B98 OHU England Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999 Free: 0800 085 1678 (UK) www.sti-europe.com 04/11Subject to change without notice.Printed in U.S.a., © 1987-2017 Safety Technology International, Inc. 2306 Airport Road Waterford, Michigan 48327, USA Tel: 248-673-9898 Fax: 248-673-1246 Toll-free: 800-888-4784 info@sti-usa.com www.sti-usa.com Taylor House 34 Sherwood Road Bromsgrove, Worcestershire B60 3DR, England Tel: +44 (0)1527 520 999 Fax: +44 (0)1527 501 999 info@sti-emea.com www.sti-emea.com 07/18Subject to change without notice. aPPROVaLS & WaRRanTY TESTING It has been tested and approved or listed by: · UL/cUL Listed no. S2466 · For fire alarm applications, UL38 requires outdoor listed stations for outdoor use · State of California (obtain local fire marshal approval) · MEa 49-00-E (STI-1200) · Flush models aDa Compliant. Surface models aDa Compliant for operation (UL Certified no. S2466) · Weather Stopper® versions designed to meet the requirements of IP54. · The indoor/outdoor rated station covers, when mounted on a smooth surface, provide a rain tight seal similar to a 3R enclosure rating. WARRANTY Three year guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components). STI Stopper II® Dimensions and Technical Information MODELS aVaILaBLE Stopper II® Models Indoor Use STI-1100* With horn for flush mount STI-1130* With horn and spacer STI-1200* Without horn flush mount STI-1230* Without horn with spacer Weather Stopper® with gaskets (Indoor/Outdoor rated) STI-1150* Stopper II with horn flush mount STI-1155* Stopper II with horn and spacer STI-1250* STI-1200 flush mount and gasket STI-3150* STI-1200 with spacer and gaskets Accessories KIT-316 Louvers for STI-3100 KIT-H19015 Two 3/16” allen wrenches STI-1102 Replacement horn for cover with alarm STI-1280 Backplate STI-3002 Weather gasket STI-3003 Conduit gasket STI-3004 Rigid conduit gasket STI-3100 2” conduit spacer with ½” or ¾” conduit entry STI-3104 2” conduit spacer with ½” or ¾” conduit entry (includes one ¾” conduit entry gasket) * Add -NR for no label on horn housing Add -CR for custom label on horn housing Add -FR for French labeling Add -ES for Spanish labeling IMPORTanT nOTICE Stopper II “FIRE” models are intended to be used in areas where the incidence of false fire alarms from manual pull stations is high or has proven to be a serious problem. any disadvantage of this device is more than balanced when one considers the consequences of false fire alarms, especially if fire service personnel and equipment are responding to a false fire alarm when they are needed for a real fire somewhere else. add to this the disruption to the facility when false alarms occur. If you have, or may have, a problem with false fire alarms or physical/weather damage to your fire alarm activation devices, the Stopper II could prove invaluable. *WaRnInG: ! For RC models: UL Listing does not permit relay contacts to connect to the fire alarm or a life safety function. The power supply for horns, according to UL Listing, cannot be connected to a UL Listed fire alarm system. For electrical specifications see install book. RC models contain one set of Form “C” dry contacts. Contacts rated 30 VaC/VDC 1 amp. EXTERNAL DIMENSIONS: • Flush 7.2 W x 10.2 H x 3.3 D in. (183x259x84mm) • Surface 7.2 W x 10.2 H x 5.5 D in. (183x259x140mm) SPACER SPACER COVER COVER HORN HOUSING 8.875 in. (225mm) 6 in. (152mm) 5.37 in. (137mm) 8.875 in. (225mm) 7.4 in. (188mm) 5.34 in. (136mm) 2 in. (51mm) .5 in. (13mm) 3.175 in. (81mm) 1 in. (25mm) 3.175 in. (81mm) 2 in. (51mm) .78 in. (20mm)SPACER ADDS 2” DEPTH (50mm) 3 in. (76mm)4 in. (102mm)5 in. (127mm)5.5 in. (140mm) 6.81 in. (173mm) 1.61 in. (41mm) 2.32 in. (59mm) 2.73 in. (70mm) 3.18 in. (81mm) 3.30 in. (84mm) 5.28 in. (134mm) 7.23 in. (184mm) 10.07 in. (256mm) SPACER SPACER COVER COVER HORN HOUSING 8.875 in. (225mm) 6 in. (152mm) 5.37 in. (137mm) 8.875 in. (225mm) 7.4 in. (188mm) 5.34 in. (136mm) 2 in. (51mm) .5 in. (13mm) 3.175 in. (81mm) 1 in. (25mm) 3.175 in. (81mm) 2 in. (51mm) .78 in. (20mm)SPACER ADDS 2” DEPTH (50mm) 3 in. (76mm)4 in. (102mm)5 in. (127mm)5.5 in. (140mm) 6.81 in. (173mm) 1.61 in. (41mm) 2.32 in. (59mm) 2.73 in. (70mm) 3.18 in. (81mm) 3.30 in. (84mm) 5.28 in. (134mm) 7.23 in. (184mm) 10.07 in. (256mm) SIDE VIEW MODELS WITH HORN (STI-1100 Series) SIDE VIEW MODELS WITHOUT HORN (STI-3150 Series)ALL MODELS END VIEW Features • Plug-in design with minimal intrusion into the back box • Tamper-resistant construction • Automatic selection of 12- or 24-volt operation at 15 and 30 candela • Field-selectable candela settings on ceiling units: 15, 30, 75, 95, 115, 150, and 177 • Horn rated at 88+ dBA at 16 volts • Rotary switch for horn tone and two volume selections • Universal mounting plate for ceiling units • Mounting plate shorting spring feature checks wiring continuity before device installation • Electrically Compatible with legacy SpectrAlert and SpectrAlert Advance devices • Compatible with MDL3 sync module • Listed for ceiling mounting only The System Sensor L-Series offers the most versatile and easy-to-use line of horns, strobes, and horn strobes in the industry with lower current draws and modern aesthetics. With white and red plastic housings, wall and ceiling mounting options, System Sensor L-Series can meet virtually any application requirement. The entire L-Series product line of ceiling-mount strobes and horn strobes include a variety of features that increase their application versatility while simplifying installation. All devices feature a plug-in design with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time- consuming ground faults. To further simplify installation, the L-Series utilizes a universal mounting plate so installers can mount them to a wide array of back boxes. With an onboard shorting spring, installers can test wiring continuity before the device is installed. Installers can also easily adapt devices to a suit a wide range of application requirements using field-selectable candela settings, automatic selection of 12- or 24-volt operation, and a rotary switch for horn tones with two volume selections. Indoor Selectable- Output Strobes and Horn Strobes for Ceiling Applications System Sensor L-Series audible visible notification products are rich with features guaranteed to cut installation times and maximize profits with lower current draw and modern aesthetics. Agency Listings 7125-1653:0504 7135-1653:0503 S5512 S4011 FM approved except for ALERT models 3057383 AVDS868-02 • 12/01/2017 • Page 3 AVDS868-02 • 12/01/2017 • Page 2 L-Series Specifications Architect/Engineer Specifications General L-Series ceiling-mount strobes and horn strobes shall mount to a standard 4 × 4 × 1½-inch back box, 4-inch octagon back box, or double- gang back box. Two-wire products shall also mount to a single-gang 2 × 4 × 17⁄8-inch back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, L-Series products, when used with the Sync•Circuit™ Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor L-Series products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full-wave rectified unfiltered power supply. Ceiling strobes and horn strobes shall have field-selectable candela settings including 15, 30, 75, 95, 115, 150, and 177. Strobe The strobe shall be a System Sensor L-Series Model _______ listed to UL 1971 and shall be approved for fire protective service. The strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. Horn Strobe Combination The horn strobe shall be a System Sensor L-Series Model _______ listed to UL 1971 and UL 464 and shall be approved for fire protective service. The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have two audibility options and an option to switch between a temporal three pattern and a non-temporal (continuous) pattern. These options are set by a multiple position switch. The horn on horn strobe models shall operate on a coded or non-coded power supply. Synchronization Module The module shall be a System Sensor Sync•Circuit model MDL3 listed to UL 464 and shall be approved for fire protective service. The module shall synchronize L-Series strobes at 1 Hz and horns at temporal three. Also, while operating the strobes, the module shall silence the horns on horn strobe models over a single pair of wires. The module shall mount to a 4 11 ⁄16 × 4 11 ⁄16 × 2 1 ⁄8-inch back box. The module shall also control two Style Y (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply. Physical/Electrical Specifications Standard Operating Temperature 32°F to 120°F (0°C to 49°C) Humidity Range 10 to 93% non-condensing Strobe Flash Rate 1 flash per second Nominal Voltage Regulated 12 VDC or regulated 24 DC/FWR1 Operating Voltage Range2 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal) Operating Voltage Range (MDL3)8.5 to 17.5V (12 V nominal) or 16.5 to 33 V (24V nominal) Input Terminal Wire Gauge 12 to 18 AWG Ceiling-Mount Dimensions (including lens)6.8" diameter × 2.5" high (173 mm diameter × 64 mm high) Ceiling-Mount Surface Mount Back Box Skirt Dimensions (SBBCRL, SBBCWL) 6.9" diameter x 3.4" high (175 mm diameter x 86 mm high) Notes: 1. Full Wave Rectified (FWR) voltage is a non-regulated, time-varying power source that is used on some power supply and panel outputs. 2. P, S, PC, and SC products will operate at 12 V nominal only for 15 and 30 cd. AVDS868-02 • 12/01/2017 • Page 3 Horn Strobe Output (dBA) Switch Position Sound Pattern dB 8–17.5 Volts 16–33 Volts DC DC FWR 1 Temporal High 84 89 89 2 Temporal Low 75 83 83 3 Non-Temporal High 85 90 90 4 Non-Temporal Low 76 84 84 5 3.1 KHz Temporal High 83 88 88 6 3.1 KHz Temporal Low 76 82 82 7 3.1 KHz Non-Temporal High 84 89 89 8 3.1 KHz Non-Temporal Low 77 83 83 UL Current Draw Data Horn Strobe Tones and Sound Output Data UL Max. Horn Current Draw (mA RMS) Sound Pattern dB 8–17.5 Volts 16–33 Volts DC DC FWR Temporal High 39 44 54 Temporal Low 28 32 54 Non-Temporal High 43 47 54 Non-Temporal Low 29 32 54 3.1 KHz Temporal High 39 41 54 3.1 KHz Temporal Low 29 32 54 3.1 KHz Non-Temporal High 42 43 54 3.1 KHz Non-Temporal Low 28 29 54 Coded High 43 47 54 3.1 KHz Coded High 42 43 54 UL Max. Strobe Current Draw (mA RMS) Candela 8–17.5 Volts 16–33 Volts DC DC FWR Candela Range 15 87 41 60 30 153 63 86 75 N/A 111 142 95 N/A 134 164 115 N/A 158 191 150 N/A 189 228 177 N/A 226 264 UL Max. Current Draw (mA RMS), Ceiling Horn Strobe, Candela Range (15–177 cd) DC Input 8–17.5 Volts 16–33 Volts 15cd 30cd 15cd 30cd 75cd 95cd 115cd 150cd 177cd Temporal High 103 167 71 90 143 165 187 217 254 Temporal Low 96 165 54 71 137 161 185 211 249 Non-Temporal High 106 173 71 90 141 165 187 230 273 Non-Temportal Low 95 166 54 71 124 161 170 216 258 3.1K Temporal High 111 164 69 94 147 163 184 229 257 3.1K Temporal Low 103 163 54 88 143 155 185 212 252 3.1K Non-Temporal High 111 172 69 94 144 164 202 229 271 3.1K Non-Temporal Low 103 169 54 88 131 155 187 217 259 FWR Input 16–33 Volts 15cd 30cd 75cd 95cd 115cd 150cd 177cd Temporal High 107 135 179 198 223 254 286 Temporal Low 78 101 151 172 199 229 262 Non-Temporal High 107 135 179 198 223 254 286 Non-Temportal Low 78 101 151 172 199 229 262 3.1K Temporal High 108 135 179 200 225 255 289 3.1K Temporal Low 79 101 150 171 196 229 260 3.1K Non-Temporal High 108 135 179 200 225 255 289 3.1K Non-Temporal Low 79 101 150 171 196 229 260 3825 Ohio Avenue • St. Charles, IL 60174 Phone: 800-SENSOR2 • Fax: 630-377-6495 ©2017 System Sensor. Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. AVDS868-02 • 12/01/2017 L-Series Dimensions Model Description Ceiling Horn Strobes PC2RL 2-Wire, Horn Strobe, Red PC2WL 2-Wire, Horn Strobe, White PC4RL 4-Wire, Horn Strobe, Red PC4WL 4-Wire, Horn Strobe, White L-Series Ordering Information Ceiling-Mount Horn Strobes Ceiling Surface Mount Back Box Model Description Ceiling Strobes SCRL Strobe, Red SCWL Strobe, White SCWL-CLR-ALERT Strobe, White, ALERT Accessories TRC-2 Universal Ceiling Trim Ring Red TRC-2W Universal Ceiling Trim Ring White SBBCRL Ceiling Surface Mount Back Box, Red SBBCWL Ceiling Surface Mount Back Box, White 6.83" diam. (173 mm) 2.47" (62.7 mm) 1.37" (34.8 mm)6.92" diam. (175.77 mm) 2.5" (64 mm) 2-Wire Ceiling Mount Horn Strobes with Ceiling Surface Mount Back Box 4-Wire Ceiling Mount Horn Strobes with Ceiling Surface Mount Back Box A0531-01 A0545-00 A0546-00 A0494-01 For a ceiling-listed horn-only device, see AVDS865 “Indoor Selectable- Output Horns, Strobes, and Horn Strobes for Wall Applications”. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7135-1653:0503 Page 1 of 2 CATEGORY: 7135 -- AUDIBLE DEVICES LISTEE:System Sensor, Unincorporated Div of Honeywell Int'l Inc.3825 Ohio Ave, St. Charles, IL 60174 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: System Sensor Indoor 2-wire and *4-wire Models: HWL, HRL, HGWL and HGRL Horns; CHWL and CHRL Chimes; P2RL, P2WL, P2GRL, P2GWL, P2RL-P, P2WL-P, P2RL-SP, P2WL-SP, *P4RL and *P4WL Wall Horn Strobes; PC2RL, PC2WL, *PC4RL and *PC4WL Ceiling Horn Strobes; CHSRL and CHSWL Wall Chime Strobes; CHSCRL and CHSCWL Ceiling Chime Strobes; Wall Bezel Parts: BZR-F, BZR-AL, BZR-AG, BZR-EV, BZR-P, BZR-SP, BZR-PG, BZW-F, BZW-AL, BZW-AG, BZW-EV, BZW-P, BZW-SP, BZW-PG, BZGR-F, BZGR-AL, BZGR-AG, BZGR-EV, BZGR-P, BZGR-SP, BZGR-PG, BZGW-F, BZGW-AL, BZGW-AG, BZGW-EV, BZGW-P, BZGW-SP and BZGW-PG, Ceiling Bezel Parts: BZRC-F, BZRC-AL, BZRC-AG, BZRC-EV, BZRC-P, BZRC-SP, BZRC-PG, BZWC-F, BZWC-AL, BZWC-AG, BZWC-EV, BZWC-P, BZWC-SP and BZWC-PG. Color Lens: LENS-A2, LENS-B2, LENS-G2, LENS-R2, LENS-AC2, LENS-BC2, LENS-GC2 and LENS-RC2. WallTrim Rings: *TR-2 and *TR-2W CeilingTrim Rings: *TRC-2 and *TRC-2W. Wall Surface Mounted Back Boxes: SBBRL, SBBGRL, SBBWL and SBBGWL, Ceiling Surface Mounted Back Boxes: Revision 08-21-2017 dcc July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator Listing No. Page 2 of 2 7135-1653:0503 SBBCRL and SBBCWL MP120KL 120 VAC Adapter Mounting Plate Refer to listee's data sheet for detailed product description and operational considerations. RATING:12 VDC regulated and 24 VDC/FWR INSTALLATION: In accordance with listee's printed installation instructions, NFPA 72, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as audible devices when used with separately listed compatible fire alarm control units. Suitable for indoor use, wall or ceiling mounted. Authority having jurisdiction should be consulted prior to installation. Refer to listee’s Installation Instruction Manual for details. Revision 08-21-2017 dcc July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7125-1653:0504 Page 1 of 2 CATEGORY: 7125 -- FIRE ALARM DEVICES FOR THE HEARING IMPAIRED LISTEE:System Sensor, Unincorporated Div of Honeywell Int'l Inc.3825 Ohio Ave, St. Charles, IL 60174 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: System Sensor Indoor 2-wire Models: SRL, SWL, SGRL, SGWL, SRL-P SWL-P, SRL-SP, SWL-CLR-ALERT and SWL-ALERT Wall Strobes; SCRL, SCWL and SCWL-CLR-ALERT Ceiling Strobes. Wall Bezel Parts: BZR-F, BZR-AL, BZR-AG, BZR-EV, BZR-P, BZR-SP, BZR-PG, BZW-F, BZW-AL, BZW-AG, BZW-EV, BZW-P, BZW-SP, BZW-PG, BZGR-F, BZGR-AL, BZGR-AG, BZGR-EV, BZGR-P, BZGR-SP, BZGR-PG, BZGW-F, BZGW-AL, BZGW-AG, BZGW-EV, BZGW-P, BZGW-SP and BZGW-PG, Ceiling Bezel Parts: BZRC-F, BZRC-AL, BZRC-AG, BZRC-EV, BZRC-P, BZRC-SP, BZRC-PG, BZWC-F, BZWC-AL, BZWC-AG, BZWC-EV, BZWC-P, BZWC-SP and BZWC-PG. Color Lens: LENS-A2, LENS-B2, LENS-G2, LENS-R2, LENS-AC2, LENS-BC2, LENS-GC2 and LENS-RC2. WallTrim Rings: TR2 and TR2W CeilingTrim Rings: TRC2 and TRC2W. Wall Surface Mounted Back Boxes: SBBRL, SBBGRL, SBBWL and SBBGWL, Ceiling Surface Mounted Back Boxes: SBBCRL and SBBCWL Refer to listee's data sheet for detailed product description and operational considerations. *Rev 04-04-19 gt July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator Listing No. Page 2 of 2 7125-1653:0504 RATING:Regulated 12 VDC setting: 8-17.5 VDC Regulated 24 VDC/fwr setting: 16-33 VDC INSTALLATION: In accordance with listee's printed installation instructions, NFPA 72, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as two wire strobe units used for synchronous application when used with separately listed compatible fire alarm control units. Suitable for indoor use, vertical wall or horizontal ceiling mounted. *Listed with software code, S05-0048-001 for low temperature compensation. Authority having jurisdiction should be consulted prior to installation. Refer to listee’s Installation Instruction Manual for details. *Rev 04-04-19 gt July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator Agency Listings Features t 8FBUIFSQSPPGQFS/&."9 *1 t -JTUFEUP6- TUSPCF BOE6- IPSO t $PNQBUJCMFXJUI4ZTUFN4FOTPSTZODISPOJ[BUJPOQSPUPDPMBOE MFHBDZ4QFDUS"MFSUQSPEVDUT t 'JFMETFMFDUBCMFDBOEFMBTFUUJOHT BOE t "VUPNBUJDTFMFDUJPOPGPSWPMUPQFSBUJPOBUBOE DBOEFMB t 3PUBSZTXJUDIGPSIPSOUPOFBOEUISFFWPMVNFTFMFDUJPOT t )PSOSBUFEBUE#"BUWPMUT t 3BUFEGSPNo¡'UP¡' t 6OJWFSTBMNPVOUJOHQMBUFXJUIBOPOCPBSETIPSUJOHTQSJOHUIBU UFTUTXJSJOHDPOUJOVJUZCFGPSFEFWJDFTBSFJOTUBMMFE t 1MVHJOEFTJHOXJUINJOJNBMJOUSVTJPOJOUPUIFCBDLCPY t 5BNQFSSFTJTUBOUDPOTUSVDUJPO t -JTUFEGPSDFJMJOHPSXBMMNPVOUJOH SpectrAlert Advance PGGFSTUIFCSPBEFTUMJOFPGPVUEPPSIPSOT TUSPCFT BOEIPSOTUSPCFTJOUIFJOEVTUSZ8JUIXIJUFPSSFEQMBTUJD IPVTJOHT XBMMPSDFJMJOHNPVOUJOHPQUJPOT BOEQMBJOPS'*3&QSJOUFE EFWJDFT 4QFDUS"MFSU"EWBODFDBONFFUWJSUVBMMZBOZBQQMJDBUJPO SFRVJSFNFOU JODMVEJOHJOEPPS PVUEPPS XFU BOEESZBQQMJDBUJPOTJO UFNQFSBUVSFTGSPN¦¡'UP¡' -JLFUIFFOUJSF4QFDUS"MFSU"EWBODFMJOF PVUEPPSIPSOT TUSPCFT BOEIPSOTUSPCFTGPSXBMMBQQMJDBUJPOTJODMVEFBWBSJFUZPGGFBUVSFT UIBUJODSFBTFBQQMJDBUJPOnFYJCJMJUZBOETJNQMJGZJOTUBMMBUJPO'JSTU m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nBOHFTBOEJNQSPWFESFTJTUBODFUPTBMUXBUFS DPSSPTJPO,OPDLPVUTMPDBUFEPOUIFCBDLFMJNJOBUFUIFOFFEUPESJMM IPMFTGPSTDSFXJONPVOUJOH1MBTUJDBOENFUBMXFBUIFSQSPPGCBDL CPYFTDPNFXJUI£JODIUPQBOECPUUPNDPOEVJUFOUSJFTBOE£JODI LOPDLPVUTBUUIFCBDL"TDSFXJO/15QMVHXJUIBO0SJOHHBTLFU GPSBXBUFSUJHIUTFBMJTJODMVEFEXJUIFBDICBDLCPY Outdoor Selectable- Output Horns, Strobes, and Horn Strobes for Wall Applications SpectrAlert® Advance outdoor audible visible products are rich with features that cut installation times and maximize profits. .&"& PVUEPPSTUSPCFT IPSOTUSPCFT DIJNFTUSPCFT IPSOT DIJNFT 4 DIJNFT IPSOTUSPCFT IPSOT 4 PVUEPPSBOEBMFSUTUSPCFT "7%4 SpectrAlert Advance Outdoor Horn, Strobe, and Horn Strobe Specifications Architect/Engineer Specifications General 4QFDUS"MFSU"EWBODFPVUEPPSIPSOT TUSPCFT BOEIPSOTUSPCFTTIBMMNPVOUUPBXFBUIFSQSPPGCBDLCPY"VOJWFSTBMNPVOUJOHQMBUFTIBMM CFVTFEGPSNPVOUJOHDFJMJOHBOEXBMMQSPEVDUT5IFOPUJmDBUJPOBQQMJBODFDJSDVJUXJSJOHTIBMMUFSNJOBUFBUUIFVOJWFSTBMNPVOUJOHQMBUF "MTP 4QFDUS"MFSU"EWBODFQSPEVDUT XIFOVTFEXJUIUIF4ZODt$JSDVJU™.PEVMFBDDFTTPSZ TIBMMCFQPXFSFEGSPNBOPODPEFEOPUJmDBUJPO BQQMJBODFDJSDVJUPVUQVUBOETIBMMPQFSBUFPOBOPNJOBMPSWPMUT8IFOVTFEXJUIUIF4ZODt$JSDVJU.PEVMF WPMUSBUFEOPUJmDBUJPO BQQMJBODFDJSDVJUPVUQVUTTIBMMPQFSBUFCFUXFFOBOEWPMUTWPMUSBUFEOPUJmDBUJPOBQQMJBODFDJSDVJUPVUQVUTTIBMMPQFSBUFCFUXFFO BOEWPMUT0VUEPPS4QFDUS"MFSU"EWBODFQSPEVDUTTIBMMPQFSBUFCFUXFFO¦BOEEFHSFFT'BISFOIFJUGSPNBSFHVMBUFE%$PSGVMMXBWF SFDUJmFEVOmMUFSFEQPXFSTVQQMZ4USPCFTBOEIPSOTUSPCFTTIBMMIBWFmFMETFMFDUBCMFDBOEFMBTFUUJOHTJODMVEJOH BOE Strobe 5IFTUSPCFTIBMMCFB4ZTUFN4FOTPS4QFDUS"MFSU"EWBODF.PEFM@@@@@@@MJTUFEUP6-BOETIBMMCFBQQSPWFEGPSmSFQSPUFDUJWFTFSWJDF 5IFTUSPCFTIBMMCFXJSFEBTBQSJNBSZTJHOBMJOHOPUJmDBUJPOBQQMJBODFBOEDPNQMZXJUIUIF"NFSJDBOTXJUI%JTBCJMJUJFT"DUSFRVJSFNFOUTGPS WJTJCMFTJHOBMJOHBQQMJBODFT nBTIJOHBU)[PWFSUIFTUSPCFTFOUJSFPQFSBUJOHWPMUBHFSBOHF5IFTUSPCFMJHIUTIBMMDPOTJTUPGBYFOPOnBTI UVCFBOEBTTPDJBUFEMFOTSFnFDUPSTZTUFN5IFTUSPCFNVTUCFJOTUBMMFEXJUIJUTXFBUIFSQSPPGCBDLCPYJOPSEFSUPSFNBJOPVUEPPSBQQSPWFE QFS6-5IFTUSPCFTIBMMCFTVJUBCMFGPSVTFJOXFUFOWJSPONFOUT Horn Strobe Combination 5IFIPSOTUSPCFTIBMMCFB4ZTUFN4FOTPS4QFDUS"MFSU"EWBODF.PEFM@@@@@@@MJTUFEUP6-BOE6-BOETIBMMCFBQQSPWFEGPS mSFQSPUFDUJWFTFSWJDF5IFIPSOTUSPCFTIBMMCFXJSFEBTBQSJNBSZTJHOBMJOHOPUJmDBUJPOBQQMJBODFBOEDPNQMZXJUIUIF"NFSJDBOTXJUI %JTBCJMJUJFT"DUSFRVJSFNFOUTGPSWJTJCMFTJHOBMJOHBQQMJBODFT nBTIJOHBU)[PWFSUIFTUSPCFTFOUJSFPQFSBUJOHWPMUBHFSBOHF5IFTUSPCF MJHIUTIBMMDPOTJTUPGBYFOPOnBTIUVCFBOEBTTPDJBUFEMFOTSFnFDUPSTZTUFN5IFIPSOTIBMMIBWFUISFFBVEJCJMJUZPQUJPOTBOEBOPQUJPOUP TXJUDICFUXFFOBUFNQPSBMUISFFQBUUFSOBOEBOPOUFNQPSBM DPOUJOVPVT QBUUFSO5IFTFPQUJPOTTIBMMCFTFUCZBNVMUJQMFQPTJUJPOTXJUDI 0OGPVSXJSFQSPEVDUT UIFTUSPCFTIBMMCFQPXFSFEJOEFQFOEFOUMZPGUIFTPVOEFS5IFIPSOPSIPSOTUSPCFNPEFMTTIBMMPQFSBUFPOBDPEFEPS OPODPEFEQPXFSTVQQMZ5IFIPSOTUSPCFNVTUCFJOTUBMMFEXJUIJUTXFBUIFSQSPPGCBDLCPYJOPSEFSUPSFNBJOPVUEPPSBQQSPWFEQFS6-5IF IPSOTUSPCFTIBMMCFTVJUBCMFGPSVTFJOXFUFOWJSPONFOUT Physical/Electrical Specifications Operating Temperature o¡'UP¡' o¡$UP¡$ Strobe Flash Rate nBTIQFSTFDPOE Nominal Voltage 3FHVMBUFE%$'83PSSFHVMBUFE%$'83 Operating Voltage Range2 UP7 7OPNJOBM PSUP7 7OPNJOBM Input Terminal Wire Gauge UP"8( Wall-Mount Dimensions (including lens)-¨8¨% NN-¨NN8¨NN% Horn Dimensions -¨8¨% NN-¨NN8¨NN% Wall-Mount Weatherproof Back Box Dimensions (SA-WBB)-¨8¨% NN-¨NN8¨NN% Notes: 'VMM8BWF3FDUJmFE '83 WPMUBHFJTBOPOSFHVMBUFE UJNFWBSZJOHQPXFSTPVSDFUIBUJTVTFEPOTPNFQPXFSTVQQMZBOEQBOFMPVUQVUT 1 4 1$ BOE4$QSPEVDUTXJMMPQFSBUFBU7OPNJOBMPOMZGPSBOEDE "7%4 Horn and Horn Strobe Output (dBA) Switch Position Sound Pattern dB 8–17.5 Volts 16–33 Volts 24-Volt Nominal Reverberant Anechoic DC FWR DC FWR DC FWR DC FWR 5FNQPSBM )JHI 88 88 2 5FNQPSBM .FEJVN 3 5FNQPSBM -PX 83 /PO 5FNQPSBM )JHI 82 82 88 88 5 /PO 5FNQPSBM .FEJVN 85 85 /PO 5FNQPSBM -PX 88 †$PEFE )JHI 82 82 88 88 8†$PEFE .FEJVN 85 85 †$PEFE -PX 88 85 †4FUUJOHT BOEBSFOPUBWBJMBCMFPOXJSFIPSOTUSPCF UL Max. Strobe Current Draw (mA RMS) Candela 8–17.5 Volts 16–33 Volts DC FWR DC FWR Standard Candela Range /" /" /" /" /" /" /" /" /" /" High Candela Range /" /"228 /" /" /" /" /" /" 258 UL Max. Current Draw (mA RMS), 2-Wire Horn Strobe, Standard Candela Range (15–115 cd) DC Input 8–17.5 Volts 16–33 Volts 15 15/75 15 15/75 30 75 95 110 115 5FNQPSBM)JHI 5FNQPSBM.FEJVN 5FNQPSBM-PX /PO5FNQPSBM)JHI /PO5FNQPSBM.FEJVN 85 /PO5FNQPSBM-PX FWR Input 5FNQPSBM)JHI 88 5FNQPSBM.FEJVN 88 5FNQPSBM-PX /PO5FNQPSBM)JHI /PO5FNQPSBM.FEJVN 85 /PO5FNQPSBM-PX UL Max. Current Draw (mA RMS), 2-Wire Horn Strobe, High Candela Range (135–185 cd) DC Input 16–33 Volts FWR Input 16–33 Volts 135 150 177 185 135 150 177 185 5FNQPSBM)JHI 5FNQPSBM)JHI 258 5FNQPSBM.FEJVN 235 253 288 5FNQPSBM.FEJVN 258 5FNQPSBM-PX 232 282 5FNQPSBM-PX /PO5FNQPSBM)JHI 255 /PO5FNQPSBM)JHI 233 /PO5FNQPSBM.FEJVN /PO5FNQPSBM.FEJVN 232 /PO5FNQPSBM-PX 238 /PO5FNQPSBM-PX UL Max. Horn Current Draw (mA RMS) Sound Pattern dB 8–17.5 Volts 16–33 Volts DC FWR DC FWR 5FNQPSBM )JHI 55 5FNQPSBM .FEJVN 58 5FNQPSBM -PX 38 /PO5FNQPSBM )JHI /PO5FNQPSBM .FEJVN /PO5FNQPSBM -PX $PEFE )JHI 55 $PEFE .FEJVN $PEFE -PX 52 UL Current Draw Data Horn Tones and Sound Output DataCandela Derating 'PS,TFSJFTQSPEVDUTVTFEBUMPXUFNQFSBUVSFT MJTUFE DBOEFMBSBUJOHTNVTUCFSFEVDFEJOBDDPSEBODFXJUI UIJTUBCMF Strobe Output (cd) Listed Candela Candela rating at –40°F %POPUVTFCFMPX¡' 0IJP"WFOVFt4U$IBSMFT *- 1IPOF4&/403t'BY ª4ZTUFN4FOTPS 1SPEVDUTQFDJmDBUJPOTTVCKFDUUPDIBOHFXJUIPVUOPUJDF7JTJUTZTUFNTFOTPSDPN GPSDVSSFOUQSPEVDUJOGPSNBUJPO JODMVEJOHUIFMBUFTUWFSTJPOPGUIJTEBUBTIFFU "7%4t SpectrAlert Advance Diagrams Model Description Wall Horn Strobes 13,†8JSF)PSO4USPCF 4UBOEBSEDE 3FE 0VUEPPS JODMVEFTQMBTUJDXFBUIFSQSPPGCBDLCPY 13),†8JSF)PSO4USPCF )JHIDE 3FE 0VUEPPS JODMVEFTQMBTUJDXFBUIFSQSPPGCBDLCPY 18,†8JSF)PSO4USPCF 4UBOEBSEDE 8IJUF 0VUEPPS JODMVEFTQMBTUJDXFBUIFSQSPPGCBDLCPY 18),†8JSF)PSO4USPCF )JHIDE 8IJUF 0VUEPPS JODMVEFTQMBTUJDXFBUIFSQSPPGCBDLCPY 13,†8JSF)PSO4USPCF 4UBOEBSEDE 3FE 0VUEPPS JODMVEFTQMBTUJDXFBUIFSQSPPGCBDLCPY 18, 8JSF)PSO4USPCF 4UBOEBSEDE 8IJUF 0VUEPPS JODMVEFTQMBTUJDXFBUIFSQSPPGCBDLCPY 13), 8JSF)PSO4USPCF )JHIDE 3FE 0VUEPPS 7 JODMVEFTQMBTUJDXFBUIFSQSPPGCBDLCPY Wall Strobes 43,†4USPCF 4UBOEBSEDE 3FE 0VUEPPS JODMVEFTQMBTUJDXFBUIFSQSPPGCBDLCPY 43),†4USPCF )JHIDE 3FE 0VUEPPS JODMVEFTQMBTUJDXFBUIFSQSPPGCBDLCPY 48,†4USPCF 4UBOEBSEDE 8IJUF 0VUEPPS JODMVEFTQMBTUJDXFBUIFSQSPPGCBDLCPY 48),†4USPCF )JHIDE 8IJUF 0VUEPPS JODMVEFTQMBTUJDXFBUIFSQSPPGCBDLCPY Horns )3,†)PSO 3FE 0VUEPPS JODMVEFTQMBTUJDXFBUIFSQSPPGCBDLCPY Accessories 4"8## 3FE .FUBM8FBUIFSQSPPG#BDL#PY 4"8##8 8IJUF .FUBM8FBUIFSQSPPG#BDL#PY SpectrAlert Advance Ordering Information Notes: "EEi1wUPNPEFMOVNCFSGPSQMBJOIPVTJOH OPi'*3&wNBSLJOHPODPWFS FH 13,1 p"EEi3wUPNPEFMOVNCFSGPSXFBUIFSQSPPGSFQMBDFNFOUEFWJDF OPCBDLCPYJODMVEFE POMZGPSVTFXJUIXFBUIFSQSPPGPVUEPPSnVTINPVOUJOHQMBUF 851BOE8518 i4UBOEBSEDEwSFGFSTUPTUSPCFTUIBUJODMVEF BOEDBOEFMBTFUUJOHTi)JHIDEwSFGFSTUPTUSPCFTUIBUJODMVEF BOE DBOEFMBTFUUJOHTWhen replacing standard outdoor units both the device and back box must be replaced. 4.7˝ 5.6˝ 2.5˝ Wall-Mount Horn Strobes Wall Plastic Weatherproof Back Box Wall-Mount Horn Strobe with Plastic Weatherproof Back Box CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No.7125-1653:0188 Page 1 of 1 CATEGORY: 7125 -- FIRE ALARM DEVICES FOR THE HEARING IMPAIRED LISTEE:System Sensor, Unincorporated Div of Honeywell Int'l Inc.3825 Ohio Ave, St. Charles, IL 60174 Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309 Email: lisa.brant@honeywell.com DESIGN: Models CHSR and CHSW Chime/Strobes. Models P2R, P2W, P2RH and P2WH Horn/Strobes two-wire type, rectangular enclosure. Models PC2R, PC2W, PC2RH and PC2WH Horn/Strobes two-wire type, round enclosure Models P4R, P4W, P4RH and P4WH Horn/Strobes four-wire type, rectangular enclosure. Models PC4R, PC4W, PC4RH and PC4WH Horn/Strobes* four-wire type, round enclosure. All models are intended for indoor use only unless other wise indicated. Models may be followed by the suffix “K” indicating indoor or outdoor use, or may be followed by suffix “P” for plain housing with no lettering. “K” suffix models are suitable for outdoor applications at temperatures from -40°F to +151°F (-40°C to +66°C) and are rated NEMA 4X when used with the System Sensor weather proof back boxes models SA-WBB (Wall), SA-WBBW (Wall), SA-WBBC (Ceiling) and *SA-WBBCW (Ceiling). Refer to listee's data sheet for additional detailed product description and operational considerations. RATING:Standard Horn/Strobes and Chime/Strobes 8 - 17.5 or 16-33 VDC/FWR Hi CD Horn/Strobes 16-33 VDC/FWR INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as *horn/strobes or chime/strobes suitable for signaling appliances and equipment for the hearing impaired applications when used with separately listed compatible fire alarm control units. Horn/strobes with -K suffix are suitable for indoor or outdoor use, ceiling or wall mount. Chime section is suitable for private mode and indoor use only. Horn/Strobes or chime/strobes* can generate the distinctive three-pulse audible Temporal Pattern Fire Alarm Evacuation Signal (for total evacuation) in accordance with NFPA 72, 2010 Edition. Refer to listee’s Installation Instruction Manual for details. *Corrected 12-15-11 bh July 01, 2022Date Issued:Listing Expires June 30, 2023 Authorized By: Fire Engineering Division This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee’s data sheet, installation instructions and/or other VICTOR WONG, Program Coordinator OFFICE OF THE FIRE MARSHAL – LA QUINTA 78495 Calle Tampico, La Quinta, CA 92253 • Phone (760) 777-7074 • www.rvcfire.org August 10, 2022 Johnson Controls PO Box 3042 Boca Raton, FL 33431 Re: Fire Alarm System Plan Review – LONGHORN STEAKHOUSE FA2022-0008 / 79705 HIGHWAY 111, LA QUINTA, CA 92253 The fire alarm system plans you submitted for the above referenced project have been reviewed by Riverside County Fire Department - Office of the Fire Marshal personnel and are approved with the following conditions. 1. For Central Station monitoring service, provide written documentation, at the time of acceptance testing, that there is a contract to provide the runner and maintenance services as required per NFPA 72. 2. The Office of the Fire Marshal staff shall witness the following inspections/tests: a) Rough-Wire Inspection – all wire not in conduit is exposed for inspection. b) Function Test / Start 24-hour Battery - The alarm installer shall provide all needed testing equipment to complete the final alarm inspection. c) 5-Minute Ring-out / Final Acceptance Testing and Certification 3. Provide a completed NFPA 72 Record of Completion that the system has been installed in accordance with the approved plans and specifications as required. 4. Operating, testing, and maintenance instructions, record drawings (“as builds”), site-specific software and equipment specifications shall be provided in a documentation cabinet in compliance with NFPA 72 Section 7.7.2 The Fire Department approved plans and conditions letter must be at the job site. Applicant/installer shall be responsible to contact the Fire Department to schedule inspections. Requests for inspections are to be made at least 48 hours in advance and may be arranged by calling (760)777-7131. All questions regarding the meaning of these conditions should be referred to the Office of the Fire Marshal staff at (760)777-7074. Kohl Hetrick - Fire Safety Specialist 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 RIVERSIDE COUNTY FIRE PROTECTION PLANNING RECORD OF INSPECTIONS / PERMIT CARD THIS CARD IS TO REMAIN ON SITE AT ALL TIMES. INSTALLING CONTRACTOR MUST BE PRESENT FOR ALL INSPECTIONS. SEE NOTES ON REVERSE SIDE. JOB ADDRESS: 79705 HIGHWAY 111 PERMIT#: FA2022-0008 DATE ISSUED: 8/10/2022 DESCRIPTION: LONGHORN STEAKHOUSE – NEW FA CONTRACTOR: JOHNSON CONTROLS HYDRANT SYSTEM DATE INITIALS SPECIAL SUPPRESSION DATE INITIALS Thrust block pre-pour Door fan test UG rough piping Abort test UG hydro Mechanical shutdown Flush Detector test Final E F Deluge/pre-action SPRINKLER U.G. Final E F Thrust block pre-pour UST/AST TANK UG rough piping Installation UG hydro Removal Flush Emergency shut off Final E F Primary piping FIRE SPRINKLER Secondary piping Weld inspection Dispensers & shear valves Overhead rough piping Final E F Overhead hydro MISC. INSPECTIONS UG flush / OK to connect Spray booths Main drain/inspectors’ test Hood/duct extinguishing High pile storage High pile rack storage In-rack sprinklers H.P. vents/access/corridors Hose racks Tract access/hydrant verification Final E F Access & Address verification HOOD EXTINGUISHING OTHER CONST. PERMIT Detection system Function test Gas/electrical shut-off Nozzle model/placement Fire alarm connection Final E F SPRAY BOOTHS FIRE CODE PERMIT(S) Installation Air flow test Mechanical interlock Extinguishing system Fire alarm connection Final E F FIRE ALARM KNOX SYSTEM Rough-wire inspection Building Knox box Function test Gate access Knox box/padlock Duct detectors/velocity BUILDING INSPECTIONS 24 hr. battery test T/I final Sprinkler monitoring Shell final Final E F Final for occupancy FINAL INSPECTION DATE: INSPECTORS SIGNATURE: **WHEN CALLING FOR AN INSPECTION PLEASE HAVE PERMIT NUMBER READY. SEE NOTES ON REVERSE SIDE** 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 INSPECTION NOTES 1. Sway bracing and hangers will be inspected at the time of rough piping inspection. 2. All required hydrostatic pressure tests shall maintain 200 psi for a 2-hour duration. (EX: Residential Fire Sprinkler Systems) 3. Fire sprinkler system remodels: if indicated on plans or this card, a hydrostatic pressure test shall be required. 4. All underground joints and thrusts blocks shall be exposed and readily visible during the hydrostatic test. 5. Contractor shall supply all testing equipment, access and operating instructions at time of test. 6. All systems shall be inspected, tested, and approved by a Fire Inspector before any work is started that may cause the affected system to be covered or hidden. POLICIES ON FIELD INSPECTIONS A. INSPECTION REQUESTS: Inspections are made subject to availability. Please have the permit number available when scheduling inspections. For City of La Quinta inspections call: (760) 777-7131. B. APPROVED PLANS: Shall be kept on the job site at all times that work is in progress. Work shall NOT commence without approved plans. C. INSPECTION REQUESTS: As required by the California Fire Code, the appropriate installing contractor shall be required to schedule the necessary inspections and be present on site for inspections. D. RE-INSPECTIONS: Will be charged against a permit when an inspection has failed, is not ready, the responsible party not on site or where previously noted corrections have not been completed. E. COMMODITIES: Unless otherwise noted on approved plans or letter of conditions, no commodities shall be entered into the structure until clearance has been granted by the Fire Dept and Building Official. F. OCCUPANCY: Buildings shall NOT be occupied by persons other than construction workers until a Final Fire Clearance has been granted by the Fire Dept and a Certificate for Occupancy has been issued by the Building Official. INSPECTION NOTES: THIS CARD IS REQURIED TO BE POSTED AT THE CONSTRUCTION SITE. THIS CARD AND APPROVED PLANS MUST BE AVAILABLE AT THE CONSTRUCTION SITE FOR ALL INSPECTIONS. THIS PERMIT SHALL EXPIRE AND BECOME NULL AND VOID IF THE WORK AUTHORIZED IS NOT COMMENCED WITHIN 180 DAYS OR IF THE WORK IS SUSPENDED OR ABANDONED FOR A PERIOD OF 180 DAYS OR MORE. THIS PERMIT IS FOR FIRE DEPARTMENT APPROVAL ONLY AND DOES NOT INTEND TO ABROGATE MORE RESTRICTIVE REQUIREMENTS OF OTHER AGENCIES HAVING RESPONSIBILITY.