Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
FSS2020-0108
Description: PEPE BUILDS / BRES2019-0239 / FIRE SPRINKLER Type: FIRE SPRINKLER (WEB) Subtype: RESIDENTIAL - CUSTOM Status: FINALED Applied: 8/11/2020 ECON HOMES Approved: 8/27/2020 KHET Parcel No: 774204027 Site Address: 54050 AVENIDA OBREGON LA QUINTA,CA 92253 Subdivision: PM 33991 Block: Lot: 1 Issued: 8/27/2020 KHET Lot Sq Ft: 0 Building Sq Ft: 0 Zoning: Finaled: 11/25/2020 KHET Valuation: $5,000.00 Occupancy Type: Construction Type: Expired: No. Buildings: 0 No. Stories: 0 No. Unites: 0 Details: 90 -"--, /16 i Applied to Approved Approved to Issued Issued to Finaled ADDITIONAL ------------- NAME TYPE NAME ADDRESSI CITY STATE ZIP PHONE FAX EMAIL APPLICANT SOUTHWEST FIRE PROS 31-410 RESERVE DR STE #2 THOUSAND PALMS CA 92276 (760)343-2233 curtis@swfirepros.com BILL TO Maureen Co 31410 reserve Dr. Thousand Palms CA 92276 (760)343-2233 maureen@swfirepros.c om CONTRACTOR SOUTHWEST FIRE PROS 31-410 RESERVE DR STE #2 THOUSAND PALMS CA 92276 (760)343-2233 curtis@swfirepros.com OWNER PEPE BUILDS 54050 AVENIDA OBREGON LA QUINTA CA 92253 (760)343-2233 Printed: Wednesday, February 22, 2023 3:56:38 PM 1 of 3 WsYsrEMS CLTD DESCRIPTION ACCOUNT CITY AMOUNT PAID PAID DATE RECEIPT # CHECK # METHOD PAID BY FIRE SPRINKLER SYSTEMS - SINGLE 101-0000-42421 0 $161.00 $161.00 8/11/20 WEB5969 07887G CREDIT SOUTHWEST FIRE ECON PROS FAMILY DETACHED FIRE SPRINKLER SYSTEMS - SINGLE 101-0000-42420 0 $242.00 $242.00 8/11/20 WEB5969 07887G CREDIT SOUTHWEST FIRE ECON PROS FAMILY DETACHED PC Total Paid for FIRE FEES: $403.00 $403.00 RECORDS 101-0000-42416 0 $10.00 $10.00 8/11/20 WEB5969 07887G CREDIT SOUTHWEST FIRE ECON MANAGEMENT FEE PROS Total Paid for RECORDS MANAGEMENT FEE: $10.00 $10.00 TECHNOLOGY 502-0000-43611 0 $5.00 $5.00 8/11/20 WEB5969 07887G CREDIT SOUTHWEST FIRE ECON ENHANCEMENT FEE PROS Total Paid for TECHNOLOGY ENHANCEMENT FEE: $5.00 $5.00 TOTALS:•• PIS,,INSIPECTIONS SEQID INSPECTION TYPE INSPECTOR SCHEDULED COMPLETED RESULT REMARKS NOTES DATE DATE OVERHEAD ROUGH KHET 9/30/2020 9/30/2020 APPROVED VK494 HEADS INSTALLED INSTEAD OF TYCOS PIPING OVERHEAD HYRO KHET 9/30/2020 9/30/2020 APPROVED FIRE FINAL" KHET 11/25/2020 11/25/2020 APPROVED Printed: Wednesday, February 22, 2023 3:56:38 PM 2 of 3 WsYsrEMS 1ST FIRE (2 WK) I HEOHL 18/11/2020 I 8/25/2020 I 8/27/2020 I APPROVED I SEE ATTCHMENTS BOND INFORMATION Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED Pepe Builds Avenida DOC 8/11/2020 EtrakitContractor Permit Application Obregon Permit 1 Application.pdf DOC 8/11/2020 EtrakitContractor Fire Sprinkler Plan HydraCalc Avenida 1 Obregon.pdf Water System Flow DOC 8/11/2020 EtrakitContractor Fire Sprinkler Plan Analysis Avenida 1 Obregon.pdf DOC 8/11/2020 EtrakitContractor Fire Sprinkler Plan Tyco TY-FRB 2.84.2 5.61 and 8.0.pdf DOC 8/11/2020 EtrakitContractor HydraCalc Pepe Builds FP-1.pdf 1 DOC 8/11/2020 EtrakitContractor Water Flow Analysis Pepe Builds FP-2.pdf 1 DOC 8/11/2020 EtrakitContractor Documents TFP442_09_2019.pdf 1 DOC 8/11/2020 EtrakitContractor Documents Pepe Builds Avenida 1 Obregon_1.pdf DOC 8/27/2020 KOHL HETRICK FSS2020-0108 - FSS2020-0108 - 1 APPROVED PLANS.pdf APPROVED PLANS.pdf DOC 9/30/2020 KOHL HETRICK FSS2020-0108 - COA and FSS2020-0108 - COA & 1 JOB CARD.pdf JOB CARD.pdf Printed: Wednesday, February 22, 2023 3:56:38 PM 3 of 3 WsYsrEMS Nw�.�a�NGeG�G � VNioNmm.) PluGvaLVSiYP) Riverside County Fire Department La Quinta Office of the Fire Marshal By: Kohl Hetricko^ FIRE SAFETY SPECIALIST 08/27/2020 2:23 10 PM The approval of plans and spec fcat ons does not permt the volaton deletion omsson or faulty nstallation of any requ mments of TNe 24 rany Local Ordinances Construction shall .man ssible and exposed for inspection purposes until approved by Me Fire Department PERMIT u - FSS2020-0108 Site Plan May H Mirror AGcitual Residence 1 PraN liil�i QPpSECTIp�yC I �4a�G�x aoannNastOrapm:.com co 0)NMO U y = N M — y D lE N N 21 �Uf�r1 N v v Ej �n 0) c�pPp O 0) CU O y O y O X t LL M N O c'') U)U2No pZ�� I �w0 d- �o me U4 Uj a� > cti w3:Q =)Z a w LO LO O n zoJQ LO PEPE BUILDS Site Plan With Details rmolewrummr 2020-142-R 07-20-2020 ommp JA nedieap cc FP-1 As maaated fu(ure• southwestfi repros. com Q N � �Nc�r— N M O U O��O)NN �r`� U �Q co co W x M No. - Description Date I✓ O LD O J (('f O ���UN W NW�/ � ICU � Z Q J 'd- V J PEPE BUILDS Sprinkler Plan Project number 2020-142-R Date 07-20-2020 Drawn by JA Checked by CC F P-2 Scale -- - - — -- 3/16" = 1'-0" Wafer Supply Information Static Pressure: 100,84 psi Residual Pressure: 86.33 psi Residual Flow: 750 GPM Additional Hose Flow. 0 GPM 3/4'Water Meter 3'-111/2" 12'-8" 6'-11" 2'-3"L. 8'-8" 2'-3" 15PSI Friction Loss O Notification Device 2'-1012" By Others 1" ire Riser 2'-11112 r-T 8'-212" 2'-01rz li 1-1/2'' PVC Underground By Others eov Supply Point `—' �oorvn Z 92' Spare Head Box now. ++^ 1 �' O2'-21 2'-21/2" 3 1" p Y-9 CD 1 1 I 0 7" 1 1 1 5'-9" Y-19 ill" 5'-8" 5'- 8'-0" B'-81n" 0 61-1 M 23 V-71X 3'-01n"per C in Or-fo+a --- +•' Q 0 nr a — o I ° ' ' I--- W M m Fire Protection System Demand; Remote area number: Calc-1 9^ QOccupancy classification: R Density: Gpm/SgFt10 Area of application: 512 SF MAX SgFt 15'-0^ fe'-0" ° f0'.4" Inspectors Test No. of sprinklers calculated: 2 m _ _ ® ,I Inside Hose Streams: 5 GPM iv r ® O0 CO Outside Hose 0GPM +�, +� IL ® C Streams: `rw I otal water required a (including hose streams): 31.0284 GPM° O a required system pressure 23.0016 Psi ,^ b I 9•_9^ I L-- -------------- - --- �� Calc-1 3'-6" 9'-6" 3'_6" 6'-712" 16'-0" 16'-0" 6'-81/2" / LO N n Fire Sprinkler Plan 3116" = 1'-0" GT ION So�tHW ON a' L. No. 1005165 r" a 07Z Sprinkler Schedule No. of SIN Orifice Sprklrs Description (Hydratec) K-Factor Size Temp 0 4 TY2231 Recessed Pendent Light Hazard Quick Response1/2 Orifice 3mm Ge 4.2 12' 200 OF 00 21 TY3596 Concealed Pendent Light Hazard Quick Response12 Orifice 3mm GB 4.9 12' 155 OF 25 Total No. of Sprinklers: 25 ,/�ra(ectixg your �r Hydraulic Calculations by HydraCALC Southwest Fire Pros 31401 Reserve Drive Suite 2 Route 111 Thousand Palms, Ca.92276 760-343-2233 Job Name PEPE BUILDS, LLC 54050 Avenida Obregon La Quinta, Ca Drawing Location 54050 Anenida Obregon Remote Area Calc-1 Contract Data File PEPE BUILDS, LLC 54050 Avenida Obregon La Quinta, Ca Area C Computer Programs by Hydratec Inc. Revision: 50.54.4 Southwest Fire Pros PEPE BUILDS, LLC 54050 Avenida Obregon La Quinta, Ca HYDRAULIC CALCULATIONS for Project name: PEPE BUILDS, LLC 54050 Avenida Obregon La Quinta, Ca Location: 54050 Anenida Obregon Drawing no: Contract number: Date: 08-06-20 Design Remote area number: Calc-1 Remote area location: Kitchen Most Remote From Riser Occupancy classification: R Density: 0.05 - Gpm/SgFt Area of application: 512 SF MAX - SgFt Coverage per sprinkler: 256 - SgFt Type of sprinklers calculated: Rapid Response No. of sprinklers calculated: 2 In -rack demand: - GPM Hose streams: 0 - GPM Total water required (including hose streams): 31.0284 - GPM Type of system: Wet Volume of dry orpreaction system: -Gal Water supply information Date: 07-16-20 Location: GEO 6-6-13-2, PZ 20-11213 Source: CVWD Name of contractor: Southwest Fire Pros Address: 31401 Reserve Drive Suite 2 Thousand Palms, Ca. 92276 Phone number: 760-343-2233 Name of designer: James Aldrich Authority having jurisdiction: Riverside County Fire Prevention Notes: (Include peaking information or gridded systems here.) @ 23.0016 - Psi Page 1 Date Computer Programs by Hydratec Inc. Revision: 50.54.4 Water Supply Curve Southwest Fire Pros PEPE BUILDS, LLC 54050 Avenida Obregon La Quinta, Ca Page 2 Date City Water Supply: Demand: C1 - Static Pressure : 100.84 D1 - Elevation 6.068 C2 - Residual Pressure: 86.33 D2 - System Flow : 31.028 C2 - Residual Flow 750 D2 - System Pressure 23.002 Hose ( Demand ) D3 - System Demand : 31.028 Safety Margin 77.798 150 140 130 P 120 R 110 C1 E 100 S 90 S 80 U 70 R 60 E 50 40 30 D2 20 10 1 100 200 300 400 500 600 700 800 900 FLOW (N^1.85) Computer Programs by Hydratec Inc. Revision: 50.54.4 Fittings Used Summary Southwest Fire Pros Page 3 PEPE BUILDS, LLC 54050 Avenida Obregon La Quinta, Ca Date Fitting Legend Abbrev. Name '/2 % 1 1'/4 1'/2 2 2'/2 3 3'/2 4 5 6 8 10 12 14 16 18 20 24 N* CPVC 90'EII Harvel-Spears 7 7 8 9 11 12 13 0 0 0 0 0 0 0 0 0 0 0 0 O* CPVC Tee - Branch 3 3 5 6 8 10 12 15 0 0 0 0 0 0 0 0 0 0 0 0 R* CPVC Coupling Tee - Run 1 1 1 1 1 1 2 2 0 0 0 0 0 0 0 0 0 0 0 0 T NFPA 13 90' Flow thru Tee 3 4 5 6 8 10 12 15 17 20 25 30 35 50 60 71 81 91 101 121 Units Summary Diameter Units Inches Length Units Feet Flow Units US Gallons per Minute Pressure Units Pounds per Square Inch Note: Fitting Legend provides equivalent pipe lengths for fittings types of various diameters. Equivalent lengths shown are standard for actual diameters of Sched 40 pipe and CFactors of 120 except as noted with *. The fittings marked with a * show equivalent lengths values supplied by manufacturers based on specific pipe diameters and CFactors and they require no adjustment. All values for fittings not marked with a * will be adjusted in the calculation for CFactors of other than 120 and diameters other than Sched 40 per NFPA. Computer Programs by Hydratec Inc. Revision: 50.54.4 Flow Summary - NFPA Southwest Fire Pros PEPE BUILDS, LLC 54050 Avenida Obregon La Quinta, Ca Page 4 Date SUPPLY ANALYSIS Node at Static Residual Available Source Pressure Pressure Flow Pressure Total Demand Required Pressure W M 100.84 86.33 750.0 100.8 31.03 23.002 NODE ANALYSIS Pressure Discharge Node Tag Elevation Node Type at Node at Node Notes 1 11.01 4.9 7.04 13.0 2 11.01 7.28 3 11.01 11.15 TOR 11.01 13.02 DOM 2.43 17.79 5.0 BOR -3.0 22.05 W M -3.0 23.0 4 11.01 4.9 7.07 13.03 5 11.01 7.28 6 11.01 10.77 0.05 256 0.05 256 Computer Programs by Hydratec Inc. Revision: 50.54.4 Final Calculations: Hazen -Williams Southwest Fire Pros Page 5 PEPE BUILDS, LLC 54050 Avenida Obregon La Quinta, Ca Date Node1 Elev1 K Qa Nom Fitting Pipe CFact Pt to or Ftngs Pe ******* Notes ****** Node2 Elev2 Fact Qt Act Eqiv Len Total Pf/Ft Pf 1 11.01 4.90 13.00 1 R 1.0 6.790 150 7.040 to 1.000 0.0 2 11.01 13.0 1.101 7.790 0.0307 0.239 Vel = 4.38 2 11.01 0.54 1 10R 10.0 90.030 150 7.279 to 20 10.0 27.000 0.0 3 11.01 13.54 1.101 N 7.0 117.030 0.0331 3.868 Vel = 4.56 3 11.01 12.49 1 R 1.0 1.880 150 11.147 to 2N 14.0 15.000 0.0 TOR 11.01 26.03 1.101 16.880 0.1108 1.870 Vel = 8.77 TOR 11.01 0.0 1 R 1.0 8.580 150 13.017 to 1.000 3.716 DOM 2.43 26.03 1.101 9.580 0.1108 1.061 Vel = 8.77 DOM 2.43 + 5.00 5.00 1 N 7.0 5.430 150 17.794 to 7.000 2.352 BOR -3 31.03 1.101 12.430 0.1533 1.906 Vel = 10.46 BOR -3 0.0 1.5 N 9.0 29.020 150 22.052 to 9.000 0.0 WM -3 31.03 1.598 38.020 0.0250 0.950 Vel = 4.96 0.0 W M 31.03 23.002 K Factor = 6.47 4 11.01 4.90 13.03 1 6.790 150 7.068 to 0.0 5 11.01 13.03 1.101 6.790 0.0308 0.209 Vel = 4.39 5 11.01 -0.54 1 70 35.0 78.560 150 7.277 to 2R 2.0 44.000 0.0 6 11.01 12.49 1.101 N 7.0 122.560 0.0285 3.491 Vel = 4.21 6 11.01 0.0 1 T 5.0 1.960 120 10.768 to 5.000 0.0 3 11.01 12.49 1.049 6.960 0.0545 0.379 Vel = 4.64 0.0 3 12.49 11.147 K Factor = 3.74 5 11.01 0.54 1 20 10.0 9.500 150 7.277 to 10.000 0.0 2 11.01 0.54 1.101 19.500 0.0001 0.002 Vel = 0.18 0.0 2 0.54 7.279 K Factor = 0.20 Computer Programs by Hydratec Inc. Revision: 50.54.4 tqC00 Worldwide I www.tyco-fire.com Contacts RAPID RESPONSE Series LFII Residential 4.9 K-factor Concealed Pendent Sprinkler Flat Plate, Wet Pipe and Dry Pipe Systems General Description The TYCO RAPID RESPONSE Series LFII Residential 4.9K Concealed Pendent Sprinklers (TY3596) are dec- orative, fusible solder sprinklers, avail- able in both ordinary 160°F (71°C) and intermediate 212°F (100°C) tempera- ture rated configurations. They are designed for use in residential occu- pancies such as homes, apartments, dormitories, and hotels. The cover plate assembly conceals the sprinkler operating components above the ceiling. The flat profile of the cover plate provides the optimum aes- thetically appealing sprinkler design. In addition, the concealed design of the Series LFII Residential Con- cealed Pendent Sprinklers provides 1/2 in. (12,7 mm) vertical adjustment. This adjustment provides a measure of flexibility when cutting fixed sprin- kler drops. The Series LFII Residential Concealed Pendent Sprinklers are intended for use in the following scenarios: • Wet and dry pipe residential sprin- kler systems for one and two fam- ily dwellings and mobile homes per NFPA 13D • Wet and dry pipe residential sprin- kler systems for residential occupan- cies up to and including four stories in height per NFPA 13R IMPORTANT Refer to Technical Data Sheet TFP2300 for warnings pertaining to regulatory and health information. Always refer to Technical Data Sheet TFP700 for the "INSTALLER WARNING" that provides cautions with respect to handling and instal- lation of sprinkler systems and com- ponents. Improper handling and installation can permanently damage a sprinkler system or its compo- nents and cause the sprinkler to fail to operate in a fire situation or cause it to operate prematurely. • Wet and dry pipe sprinkler systems for the residential portions of any occupancy per NFPA 13 The Series LFII Residential Concealed Pendent Sprinklers have been designed with heat sensitivity and water distri- bution characteristics proven to help in the control of residential fires and to improve the chance for occupants to escape or be evacuated. The Series LFII Residential Con- cealed Pendent Sprinklers (TY3596) are shipped with a Disposable Protec- tive Cap. The Protective Cap is tem- porarily removed for installation, and then it can be replaced to help protect the sprinkler while the ceiling is being installed or finished. The tip of the Pro- tective Cap can also be used to mark the center of the ceiling hole into the plaster board, ceiling tiles, and so on, by gently pushing the ceiling product against the Protective Cap. When the ceiling installation is complete the Pro- tective Cap is removed and the Cover Plate Assembly is installed. Dry Pipe System Application The 160°F (71°C) temperature rated Series LFII Residential Concealed Pendent Sprinklers offer a laboratory approved option for designing dry pipe residential sprinkler systems, whereas, most residential sprinklers are labora- tory approved for wet systems only. Through extensive testing, it has been determined that the number of design sprinklers (hydraulic design area) for the Series LFII Residential Concealed Pendent Sprinklers need not be increased over the number of design sprinklers (hydraulic design area) as specified for wet pipe sprinkler systems, as is accustomed for density/ area sprinkler systems designed per NFPA 13. Consequently, the Series LFII Residen- tial Concealed Pendent Sprinklers offer the features of non -water filled pipe in addition to not having to increase the number of design sprinklers (hydraulic design area) for systems designed to NFPA 13, 13D, or 13R. NOTICE The Series LFII Residential Concealed Pendent Sprinklers (TY3596) described herein must be installed and main- tained in compliance with this docu- ment and with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA), in addition to the standards of any authorities having jurisdiction. Failure to do so may impair the performance of these devices. The owner is responsible for main- taining their fire protection system and devices in proper operating con- dition. Contact the installing contrac- tor or product manufacturer with any questions. Sprinkler Identification Number (SIN) TY3596 Page 1 of 6 SEPTEMBER 2019 TFP442 TFP442 Page 2 of 6 Technical Data Approvals UL and C-UL Listed NYC Approved under MEA 44-03-E-2NSF Certified to all requirements of NSF/ANSI 61 Australian WaterMark Certified The TYCO RAPID RESPONSE Series LFII Residential Concealed Pendent Sprinklers are Listed only when installed with LFII Con- cealed Cover Plates having factory -applied finishes. Sprinklers and Cover Plates are separately ordered. See the Ordering Procedure section for more information. Maximum Working Pressure 175 psi (12,1 bar) Discharge Coefficient K=4.9 GPM/psi' (70,6 LPM/bar") Temperature Rating Ordinary 160°F (71°C) Sprinkler/ 139°F (59°C) Cover Plate NOTE: Maximum Ambient Ceiling Temperature for the ordinary temperature configuration is 100°F (38°C) Intermediate* 212°F (100°C) Sprinkler/ 165°F (74°C) Cover Plate *For wet pipe systems only NOTE: Maximum Ambient Ceiling Temperature for the intermediate temperature configuration is 150°F (65°C) Vertical Adjustment 1/2 in. (12,7 mm) Finishes See the Ordering Procedure section Physical Characteristics Body..............................Brass Cap..............................Bronze Saddle.............................Brass Sealing Assembly. Beryllium Nickel w/TEFLON Soldered Link Halves ................ Nickel Lever.............................Bronze Compression Screw .................. Brass Deflector .................. Copper or Brass Guide Pin Housing ..................Bronze Guide Pins ......... Stainless Steel or Bronze Support Cup ....................... Steel Cover Plate ................. Copper/Brass** Retainer ......................... Copper Cover Plate Ejection Spring .... Stainless Steel ** Brass Cover Plate is offered for Intermediate Tem- perature 165°F (74°C) only. Operation When exposed to heat from a fire, the Cover Plate, which is normally soldered to the Retainer at three points, falls away to expose the sprinkler assembly. At this point the Deflector supported by the Arms drops down to its operated position. The fusible link of the sprin- kler assembly is comprised of two link halves that are soldered together with a thin layer of solder. When the rated temperature is reached, the solder melts and the two link -halves separate BODY (1/2" NP CAP SADDLI SUPPOF CUP W11 ROLL FORI THREAC GUIDE PIN GUIDE P HOUSIN THREADINTO SUPPOR CUP UNT MOUNTIN SURFACE FLUSH WI' CEILING SOLDEF TAB SPRINKLER ASSEMBLY ASSEMBLY FIGURE 1 RAPID RESPONSE SERIES LFII RESIDENTIAL CONCEALED PENDENT SPRINKLER (TY3596) allowing the sprinkler to activate and flow water. Design Criteria The TYCO RAPID RESPONSE Series LFII Residential Concealed Pendent Sprinklers (TY3596) are UL and C-UL Listed for installation in accordance with this section. Note: When conditions exist that are outside the scope of the provided cri- teria, refer to the Residential Sprinkler Design Guide TFP490 for the manu- facturer's recommendations that may be acceptable to the authority having jurisdiction. System Types Per the UL and C-UL Listing, the 160°F (71°C) and 212°F (100°C) LFII Residential Concealed Pendent Sprin- klers may be utilized in wet pipe systems. Only the 160°F (71°C) LFII Res- ;EALING )SEMBLY 'RINKLER IENCHING AREA 1PRESSION SCREW LEVER _DER LINK LEMENT FLECTOR PERATED OSITIOM RETAINER H THREAD )IMPLES JECTION SPRING COVER PLATE idential Concealed Pendent Sprinklers may be utilized in dry pipe systems, per the UL and C-UL Listing. Refer to Technical Data Sheet TFP485 about the use of residential sprinklers in residential dry pipe systems. Ceiling Types Smooth flat horizontal, beamed, or sloped in accordance with NFPA 13D, 13R, or 13 as applicable. Hydraulic Design (NFPA 13D and 13R) For systems designed to NFPA 13D or NFPA 13R, the minimum required sprin- kler flow rates are given in Tables A and B as a function of temperature rating and the maximum allowable coverage areas. The sprinkler flow rate is the minimum required discharge from each of the total number of "design sprinklers" as specified in NFPA 13D or NFPA 13R. TFP442 Page 3 of 6 WET PIPE SYSTEM Minimum Flow and Residual Pressure2,3 Maximum Coverage Maximum Temp. Rating Area' p Sfting 160°F (71°C), 212°F (100°C) Minimum ft x ft (m) Deflector to Installation Spacing (m x m) Flow Pressure Ceiling Type ft GPM psi (m) (LPM) (bar) 12 x 12 12 13 7.0 (3,7 x 3,7) (3,7) (49,2) (0,48) Smooth Ceilings 14 x 14 14 13 7.0 7/8 to 1-1/8 in. (4,3 x 4,3) (4,3) (49,2) (0,48) Beamed Ceilings per NFPA 13D or Concealed 8 16 x 16 16 13 7.0 (4,9 x 4,9) (4,9) (49,2) (0,48) 13R, or 13. Installed in (2,4) 18 x 18 18 17 12.0 beam (5,5 x 5,5) (5,5) (64,3) (0,83) 7/8 to 1-1/8 in. below bottom 20 x 20 20 20 16.7 of beam (6,1 x 6,1) (6,1) (75,7) (1,15) Notes: 1. For coverage area dimensions less than or between those indicated, use the minimum required flow for the next highest coverage area for which hydraulic design criteria are stated. 2. Requirement is based on minimum flow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated using the nominal K-factor. See Hydraulic Design under the Design Criteria section. 3. For NFPA 13 residential applications, the greater of 0.1 GPM/ft2 over the design area or the flow in accordance with the criteria in this table must be used. TABLE A WET PIPE SYSTEM SERIES LFII RESIDENTIAL 4.9 K-FACTOR FLAT PLATE CONCEALED PENDENT SPRINKLER (TY3596) NFPA 13D, 13R, AND 13 HYDRAULIC DESIGN CRITERIA DRY PIPE SYSTEM Minimum Flowand Residual Pressure 2,3 Maximum Coverage Maximum Ordinary Temp. Rating Area' Spacing 160°F (71°C) Minimum ft x ft (m) Deflector to Installation Spacing (m x m) Flow Pressure Ceiling Type ft GPM psi (m) (LPM) (bar) 12 x 12 12 13 7.0 (3,7 x 3,7) (3,7) (49,2) (0,48) Smooth Ceilings 14 x 14 14 14 8.2 7/8 to 1-1/8 in. (4,3 x 4,3) (4,3) (53,0) (0,57) Beamed Ceilings per NFPA 13D or Concealed 8 16 x 16 16 15 9.4 (4,9 x 4,9) (4,9) (56,8) (0,65) 13R, or 13. Installed in (2,4) 18 x 18 18 18 13.5 beam (5,5 x 5,5) (5,5) (68,1) (0,93) 7/8 to 1-1/8 in. below bottom 20 x 20 20 21 18.4 of beam (6,1 x 6,1) (6,1) (79,5) (1,27) Notes: 1. For coverage area dimensions less than or between those indicated, use the minimum required flow for the next highest coverage area for which hydraulic design criteria are stated. 2. Requirement is based on minimum flow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated us- ing the nominal K-factor. See Hydraulic Design under the Design Criteria section. 3. For NFPA 13 residential applications, the greater of 0.1 GPM/ft2 over the design area or the flow in accordance with the criteria in this table must be used. TABLE B DRY PIPE SYSTEM RAPID RESPONSE SERIES LFII RESIDENTIAL 4.9 K-FACTOR FLAT PLATE CONCEALED PENDENT (TY3596) NFPA 13D, 13R, AND 13 HYDRAULIC DESIGN CRITERIA TFP442 Page 4 of 6 2-1/2" DIA. _ (63,5 mm) 1/2" (12,7 mm) 1/2 THREADED NPT, ADJUSTMENT COVER- SPRINKLER - RETAINER SUPPORT CUP ASSEMBLY ASSEMBLY 3-3/16" DIA. _ (81,0 mm) TEMPERATURE RATING PROFILE DEPTH AIR GAP ORDINARY 3/16" (4,8 mm) 1/8" (3,2 mm) INTERMEDIATE 5/32" (4,0 mm) 3/32" (2,4 mm) 1 FACE OF SPRINKLER 1-7/8"t1/4" FITTING (47,6 mm MOUNTING t6,4 mm) SURFACE � t PROFILE AIR DEPTH GAP (SEE (SEE TABLE) TABLE) SPRINKLER SUPPORT Cl ASSEMBLY 5/8" (15,9 mr 1-1/8" (28,6 m LE TIP PROTECTIVE CAP COVER PLATE OPERATED RETAINER SPRINKLER DEFLECTOR IN OPERATED POSITION FIGURE 2 RAPID RESPONSE SERIES LFII RESIDENTIAL CONCEALED PENDENT SPRINKLER (TY3596) INSTALLATION DIMENSIONS, PROTECTIVE CAP, AND ACTIVATED DEFLECTOR The number of "design sprinklers" specified in NFPA 13D and 13R for wet pipe systems is to be applied when designing dry pipe systems. Hydraulic Design (NFPA 13) For systems designed to NFPA 13, the number of design sprinklers is to be the four most hydraulically demanding sprinklers. The minimum required dis- charge from each of the four sprinklers is to be the greater of the following: • The flow rates given in Tables A and B as a function of temperature rating and the maximum allowable cover- age area • A minimum discharge of 0.1 GPM/ft2 over the design area comprised of the four most hydrauli- cally demanding sprinklers for actual coverage areas protected by the four sprinklers The number of design sprinklers speci- fied in NFPA 13 for wet pipe systems is to be applied when designing dry pipe systems. Dry Pipe System Water Delivery When using the Series LFII Residen- tial Concealed Pendent Sprinklers in dry pipe sprinkler systems, the time for water delivery must not exceed 15 seconds for the most remote operat- ing sprinkler. Obstruction to Water Distribution Sprinklers are to be located in accor- dance with the obstruction rules of NFPA 13D, 13R, and 13 as applicable for residential sprinklers as well as with the obstruction criteria described within the Technical Data Sheet TFP490. Operational Sensitivity The sprinklers are to be installed rela- tive to the ceiling mounting surface as shown in Figure 2. Sprinkler Spacing The minimum spacing between sprin- klers is 8 ft (2,4 m). The maximum spacing between sprinklers cannot exceed the length of the coverage area (see Table A or B) being hydraulically calculated, for example, maximum 12 ft for a 12 ft x 12 ft coverage area, or 20 ft for a 20 ft x 20 ft coverage area. The Series LFII must not be used in applications where the air pres- sure above the ceiling is greater than that below. Down drafts through the Support Cup could delay sprinkler operation in a fire situation. Installation The TYCO RAPID RESPONSE Series LFII Residential Concealed Pendent Sprinklers (TY3596) must be installed in accordance with this section. General Instructions Damage to the fusible Link Assembly during installation can be avoided by handling the sprinkler by the support cup only. Therefore, do not apply pres- sure to the fusible Link Assembly. A 1/2 in. NPT sprinkler joint should be obtained with a minimum to maximum torque of 7 to 14 lb-ft (9,5 to 19,0 N•m). Higher levels of torque may distort the sprinkler inlet with consequent leakage or impairment of the sprinkler. Do not attempt to compensate for insufficient adjustment in the Cover Plate Assembly by under -or over - tightening the Sprinkler. Readjust the position of the sprinkler fitting to suit. WRENCH RECESS PUSH WRENCH IN TO ENSURE ENGAGEMENT WITH SPRINKLER WRENCHING AREA FIGURE 3 W-TYPE 18 SPRINKLER WRENCH Step 1. The sprinkler must only be installed in the pendent position and with the centerline of the sprinkler per- pendicular to the mounting surface. Step 2. Remove the Protective Cap. Step 3. With pipe thread sealant applied to the pipe threads, and using the W-Type 18 Wrench shown in Figure 3, install and tighten the Sprinkler/ Support Cup Assembly into the fitting. The W-Type 18 Wrench will accept a 1/2 in. ratchet drive. Step 4. Replace the Protective Cap by pushing it upwards until it bottoms out against the Support Cup. The Protec- tive Cap helps prevent damage to the Deflector and Guide Pins during ceiling installation and/or during application of the finish coating of the ceiling. It may also be used to locate the center of the clearance hole by gently pushing the ceiling material against the center point of the Cap. TFP442 Page 5 of 6 Note: As long as the protective Cap remains in place, the system is consid- ered to be "Out Of Service." Step 5. After the ceiling has been com- pleted with the 2-1/2 in. (63 mm) diam- eter clearance hole and in preparation for installing the Cover Plate Assembly, remove and discard the Protective Cap, and verify that the Deflector moves up and down freely. If the sprinkler has been damaged and the Deflector does not move up and down freely, replace the entire sprinkler assembly. Do not attempt to modify or repair a damaged sprinkler. Step 6. Push on the Cover Plate Assembly until its flange comes in contact with the ceiling. Do not continue to push on the Cover Plate Assembly such that it lifts a ceiling panel out of its normal position. If the Cover Plate Assembly cannot be engaged with the Mounting Cup or the Cover Plate Assembly cannot be engaged sufficiently to contact the ceiling, the Sprinkler Fitting must be repositioned. Care and Maintenance The TYCO RAPID RESPONSE Series LFII Residential Concealed Pendent Sprinklers (TY3596) must be maintained and serviced in accordance with this section. Before closing a fire protection system main control valve for maintenance work on the fire protection system which it controls, permission to shut down the affected fire protection system must be obtained from the proper authorities and all personnel who may be affected by this action must be notified. Absence of a Cover Plate may delay the sprinkler operation in a fire situation. When properly installed, there is an air gap between the lip of the Cover Plate and the ceiling. The Ordinary Tem- perature Cover Plate assembly has a nominal 1/8 in. (3,2 mm) air gap. The Intermediate Temperature Cover Plate has a nominal 3/32 (2,4 mm) air gap, as shown in Figure 2. This air gap is necessary for proper operation of the sprinkler by allowing heat flow from a fire to pass below and above the Cover Plate to help assure appropriate release of the Cover Plate in a fire situation. If the ceiling is to be repainted after the installation of the Sprinkler, care must be exercised to ensure that the new paint does not seal off any of the air gap. Factory painted Cover Plates must not be repainted. They should be replaced, if necessary, by factory painted units. Non -factory applied paint may adversely delay or prevent sprinkler operation in the event of a fire. Do not pull the Cover Plate relative to the Enclosure. Separation may result. Sprinklers which are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated, or otherwise altered after leaving the factory. Modi- fied or over heated sprinklers must be replaced. Care must be exercised to avoid damage before, during, and after instal- lation. Sprinklers damaged by drop- ping, striking, wrench twist/slippage, or the like, must be replaced. The owner is responsible for the inspection, testing, and maintenance of their fire protection system and devices in compliance with this document, as well as with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION, for example, NFPA 25, in addition to the standards of any other authorities having jurisdiction. Contact the installing contractor or product manufacturer with any questions. The owner must assure that the sprin- klers are not used for hanging any objects and that the sprinklers are only cleaned by means of gently dusting with a feather duster; otherwise, non - operation in the event of a fire or inad- vertent operation may result. Automatic sprinkler systems should be inspected, tested, and maintained by a qualified Inspection Service in accor- dance with local requirements and/or national codes. Limited Warranty For warranty terms and conditions, visit www.tyco-fire.com. Ordering Procedure Contact your local distributor for avail- ability. When placing an order, indicate the full product name and part number (P/N). Sprinkler Assemblies Specify: Series LFII (TY3596) 4.91K Res- idential Concealed Pendent Sprinkler, P/N (specify): 160'F(71°C) ...................51-112-1-160 212°F(100°C)..................51-112-1-212 Note: Sprinkler and Cover Plates are separately sold. See below for Cover Plate ordering information. Cover Plate Assemblies Specify: LFII Concealed Sprinkler Cover Plate Assembly, temperature rating (specify), (specify) finish, P/N (specify): 139'F(59°C) Ivory (RAU 015) ............... 56-204-0-135 Bright Chrome ................ 56-204-1-135 Beige (RAL1001) .............. 56-204-2-135 Pure White (RAL9010)* .........56-204-3-135 Signal White (RAL9003)** .......56-204-4-135 Grey White (RAL9002).......... 56-204-5-135 Brown(RAL8028)..............56-204-6-135 Black (RAL9005) .............. 56-204-7-135 Brushed Brass ................56-204-8-135 Brushed Chrome ..............56-204-9-135 Custom Paint .................56-204-X-135 165°F (74°C) Ivory (RAU 015) ............... 56-204-0-165 Bright Chrome ................ 56-204-1 165 Beige (RAL1001) ..............56-204-2-165 Pure White (RAL9010)* .........56-204-3-165 Signal White (RAL9003)'* .......56-204-4-165 Grey White (RAL9002).......... 56-204-5-165 Brown(RAL8028)..............56-204-6-165 Black (RAL9005) .............. 56-204-7-165 Brushed Brass ................56-204-8-165 Brushed Chrome ..............56-204-9-165 Custom Paint .................56-204-X-165 'Eastern Hemisphere sales only "Previously known as Bright White Note: All Custom Cover Plates are painted using SHERWIN-WILLIAMS Interior Latex Paint. Contact Johnson Controls Customer Service with any questions related to custom orders. Sprinkler Wrench Specify: W-Type 18 Sprinkler Wrench, P/N 56-000-1-265 TFP442 Page 6 of 6 1400 Pennbrook Parkway, Lansdale, PA 19446 1 Telephone A-215-362-0700 02019 Johnson Controls. All rights reserved. All specifications and other Information shown were current as of document revision date and are subject to change without notice. Johnson 400 NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association; Controls TEFLON is a registered trademark of DuPont; SHERWIN-WILLIAMS is a registered trademark of SWIMC LLC tqco Fire Protection Products Series TY-FRB — Worldwide I www.tyco-fire.com Contacts 2.8, 4.2, 5.6, and 8.0 K-Factor Upright, Pendent, and Recessed Pendent Sprinklers Quick Response, Standard Coverage General Description The TYCO Series TY-FRB, 2.8, 4.2, 5.6, and 8.0 K-factor, Upright, Pendent, and Recessed Pendent Sprinklers described in this data sheet are quick response, standard coverage, deco- rative 3 mm glass bulb -type spray sprinklers designed for use in light or ordinary hazard, commercial occupan- cies such as banks, hotels, and shop- ping malls. The recessed version of the Series TY-FRB Pendent Sprinkler, where applicable, is intended for use in areas with a finished ceiling. This recessed pendent sprinkler uses one of the following: • A two-piece Style 10 (1/2 inch NPT) or Style 40 (3/4 inch NPT) Recessed Escutcheon with 1/2 inch (12,7 mm) of recessed adjustment or up to 3/4 inch (19,1 mm) of total adjustment from the flush pendent position, or a • A two-piece Style 20 (1/2 inch NPT) or Style 30 (3/4 inch NPT) Recessed Escutcheon with 1/4 inch (6,4 mm) of recessed adjustment or up to 1/2 inch (12,7 mm) of total adjustment from the flush pendent position. The adjustment provided by the Recessed Escutcheon reduces the accuracy to which the fixed pipe drops to the sprinklers must be cut. Corrosion -resistant coatings, where applicable, are utilized to extend the life of copper alloy sprinklers beyond that which would otherwise be obtained IMPORTANT Always refer to Technical Data Sheet TFP700 for the "INSTALLER WARNING" that provides cautions with respect to handling and instal- lation of sprinkler systems and com- ponents. Improper handling and installation can permanently damage a sprinkler system or its compo- nents and cause the sprinkler to fail to operate in a fire situation or cause it to operate prematurely. when exposed to corrosive atmo- spheres. Although corrosion -resistant coated sprinklers have passed the standard corrosion tests of the appli- cable approval agencies, the testing is not representative of all possible cor- rosive atmospheres. Consequently, it is recommended that the end user be consulted with respect to the suit- ability of these coatings for any given corrosive environment. The effects of ambient temperature, concentration of chemicals, and gas/chemical velocity, should be considered, as a minimum, along with the corrosive nature of the chemical to which the sprinklers will be exposed. An intermediate level of the Series TY-FRB Pendent Sprinklers is detailed in Technical Data Sheet TFP356, and Sprinkler Guards are detailed in Tech- nical Data Sheet TFP780. NOTICE The Series TY-FRB, 2.8, 4.2, 5.6, and 8.0 K-factor, Upright, Pendent, and Recessed Pendent Sprinklers described herein must be installed and maintained in compliance with this document and with the applica- ble standards of the National Fire Pro- tection Association, in addition to the standards of any authorities having jurisdiction. Failure to do so may impair the performance of these devices. The owner is responsible for maintain- ing their fire protection system and devices in proper operating condition. The installing contractor or sprinkler manufacturer should be contacted with any questions. Sprinkler Identification Number (SIN) TY1131 - Upright 2.8K, 1/2- NPT TY1231 - Pendent 2.8K, 1/2- NPT TY2131 - Upright 4.2K, 1/2-NPT TY2231 - Pendent 4.2K, 1/2- NPT TY3131 - Upright 5.6K, 1/2- NPT TY3231 - Pendent 5.6K, 1/2-NPT TY4131 - Upright 8.OK, 3/4- NPT TY4231 - Pendent 8.OK, 3/4- NPT TY4831 - Upright 8.OK, 1/2- NPT TY4931 - Pendent 8.OK, 1/2- NPT Page 1 of 10 NOVEMBER 2015 TFP171 TFP171 Page 2of10 * Temperature rating ** Pipe thread connections per 1 Frame is indicated on ISO 7-1 can be provided on ESCUTCHEON 2 Button Deflector. special request. PLATE SEATING SURFACE r(57 2-1/4,2 mm) 1-9116" (39,7 mm) STYLE 10 or 20 RECESSED ESCUTCHEON 3 - Sealing 5 - Compression Assembly Screw 4 - Bulb 6 - Deflector* 7 - Bushing 2-7/8" (73,0 mm) DIA. - RECESSED PENDENT [a] Z9b*161x00NP►I FIGURE 1 QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY1131) AND PENDENT (TY1231) SPRINKLERS 2.8 K-FACTOR, 112 INCH NPT * Temperature rating ** Pipe thread connections per is indicated on ISO 7-1 can be provided on ESCUTCHEON Deflector. special request. PLATE SEATING SURFACE 7/16" (11,1 mm) NOMINAL 2-3/16" MAKE -IN (55,6 mm) 2-3/16" 1-1/2" (55,6 mm) (38,1 mm) 1/2" NPT** WRENCH STYLE 10 or 20 FLATS RECESSED 1 - Frame 3 - Sealing 5 - Compression 2 - Button Assembly Screw 4 - Bulb 6 - Deflector* �-- 2-7/8" (73,0 mm) DIA. UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION FIGURE 2 QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY2131) AND PENDENT (TY2231) SPRINKLERS 4.2 K-FACTOR, 112 INCH NPT * Temperature rating is indicated on Deflector. 1/2" NPT* UPRIGHT ESCUTCHEON PLATE SEATING SURFACE i 7/16" _::j '11,1 mm) VOMINAL 2-3/16" MAKE -IN (55,6 mm) 2-3/16" 1-1/2" (55,6 mm) (38,1 mm) * WRENCH STYLE 10 or 20 FLATS RECESSED PENDENT ESCUTCHEON ** Pipe thread connections per ISO 7-1 can be provided on special request. 1 - Frame 3 - Sealing 5 - Compression 2 - Button Assembly Screw 4 - Bulb 6 - Deflector* I-- 2-7/8" (73,0 mm) DIA. RECESSED PENDENT CROSS SECTION FIGURE 3 QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY3131) AND PENDENT (TY3231) SPRINKLERS 5.6 K-FACTOR, 112 INCH NPT TFP171 Page 3 of 10 * Temperature rating ** Pipe thread connections per 1 Frame 3 Sealing 5 - Compression is indicated on ISO 7-1 can be provided on ESCUTCHEON 2 - Button Assembly Screw Deflector. special request. PLATE SEATING 4 Bulb 6 - Deflector* SURFACE 1/2" (12,7 mm) NOMINAL 2-5/16" MAKE -IN (58,7 mm) 2-1/4" (57,2 mm) \ 3/4" NPT** WRENCH STYLE 30 or 40 FLATS RECESSED UPRIGHT PENDENT ESCUTCHEON 2-7/8" (73,0 mm) DIA. RECESSED PENDENT CROSS SECTION FIGURE 4 QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY4131) AND PENDENT (TY4231) SPRINKLERS 8.0 K-FACTOR, 314 INCH NPT 7/16" (11,1 mm) NOMINAL Ll MAKE -IN 2-3/16" it (55,6 mm) 112" NPT ** WRENCH FLATS JUa 1I:N:111 CEILING PLATE SEATING SURFACE f 2-1/4" 1 (57,2 mm) 1-9/16" (39,7 mm) 1 - Frame 5 - Compression 2 - Button Screw 1 3 - Sealing 6 - Deflector Assembly 3 4 - Bulb 2 Y6* * Temperature rating is 4 indicated on Deflector. 5 ** Pipe thread connections per ISO 7-1 can be provided on special request. PENDENT CROSS SECTION FIGURE 5 QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY4831) AND PENDENT (TY4931) SPRINKLERS 8.0 K-FACTOR, 112 INCH NPT WRENCH RECESS (END "A" USED FOR 1/2" NPT MODELS) WRENCH RECESS (END "B" USED FOR 3/4" NPT MODELS) FIGURE 6 W-TYPE 6 SPRINKLER WRENCH WRENCH RECESS PUSH WRENCH IN TO ENSURE ENGAGEMENT WITH SPRINKLER WRENCHING AREA FIGURE 7 W-TYPE 7 RECESSED SPRINKLER WRENCH TFP171 Page 4of10 Technical Data Approvals UL and C-UL Listed FM, LPCB, and NYC Approved Refer to Table A and B for complete approval information including corrosion - resistant status. Maximum Working Pressure Refer to Table C. Discharge Coefficient K=2.8 gpm/psi'/Z (40,3 Ipm/bar/) K=4.2 gpm/psi/2 (60,5 Ipm/bar'/2) K=5.6 gpm/psi'/2 (80,6 Ipm/bar'/2) K=8.0 gpm/psi/Z (115,2 Ipm/bar'/Z) Temperature Rating Refer to Table A and B. Finishes Sprinkler: Refer to Table D. Recessed Escutcheon: Signal or Pure White, Jet Black, Chrome Plated, or Natural Brass Physical Characteristics Frame ............................Bronze Button......................Brass/Copper Sealing Assembly. . Beryllium Nickel w/TEFLON Bulb...............................Glass Compression Screw .................Bronze Deflector ................... Copper/Bronze Bushing(K=2.8).....................Bronze Operation The glass bulb contains a fluid that expands when exposed to heat. When the rated temperature is reached, the fluid expands sufficiently to shatter the glass bulb, allowing the sprinkler to activate and water to flow. Design Criteria The TYCO Series TY-FRB, 2.8, 4.2, 5.6, and 8.0 K-factor, Upright, Pendent, and Recessed Pendent Sprinklers are intended for fire protection systems designed in accordance with the stan- dard installation rules recognized by the applicable Listing or Approval agency (such as, UL Listing is based on the requirements of NFPA 13, and FM Approval is based on the require- ments of FM's Loss Prevention Data Sheets). Only the Style 10, 20, 30, or 40 Recessed Escutcheon, as applica- ble, is to be used for recessed pendent installations. Installation The TYCO Series TY-FRB, 2.8, 4.2, 5.6, and 8.0 K-factor, Upright, Pendent, and Recessed Pendent Sprinklers must be installed in accordance with this section. General Instructions Do not install any bulb -type sprinkler if the bulb is cracked or there is a loss of liquid from the bulb. With the sprin- kler held horizontally, a small air bubble should be present. The diameter of the air bubble is approximately 1/16 inch (1,6 mm) for the 135°F (57°C) and 3/32 inch (2,4 mm) for the 286°F (141°C) tem- perature ratings. A leak -tight 1/2 inch NPT sprinkler joint should be obtained by applying a minimum to maximum torque of 7 to 14 ft.-Ibs. (9,5 to 19,0 Nm). A leak tight 3/4 inch NPT sprinkler joint should be obtained with a torque of 10 to 20 ft.- Ibs. (13,4 to 26,8 Nm). Higher levels of torque can distort the sprinkler Inlet with consequent leakage or impairment of the sprinkler. Do not attempt to compensate for insufficient adjustment in the Escutch- eon Plate by under- or over -tightening the sprinkler. Re -adjust the position of the sprinkler fitting to suit. Series TY-FRB Upright and Pendent Sprinklers The Series TY-FRB Pendent and Upright Sprinklers must be installed in accordance with the following instructions. Step 1. Install Pendent sprinklers in the pendent position. Install upright sprin- klers in the upright position. Step 2. With pipe -thread sealant applied to the pipe threads, hand - tighten the sprinkler into the sprinkler fitting. Step 3. Tighten the sprinkler into the sprinkler fitting using only the W-Type 6 Sprinkler Wrench (Figure 6). With ref- erence to Figures 1 through 5, apply the W-Type 6 Sprinkler Wrench to the sprinkler wrench flats. Series TY-FRB Recessed Pendent Sprinklers The Series TY-FRB Recessed Pendent Sprinklers must be installed in accor- dance with the following instructions. Step A. After installing the Style 10, 20, 30, or 40 Mounting Plate, as applica- ble, over the sprinkler threads and with pipe -thread sealant applied to the pipe threads, hand -tighten the sprinkler into the sprinkler fitting. Step B. Tighten the sprinkler into the sprinkler fitting using only the W-Type 7 Recessed Sprinkler Wrench (Figure 7). With reference to Figures 1 to 4, apply the W-Type 7 Recessed Sprinkler Wrench to the sprinkler wrench flats. Step C. After ceiling installation and finishing, slide on the Style 10, 20, 30, or 40 Closure over the Series TY-FRB Sprinkler and push the Closure over the Mounting Plate until its flange comes in contact with the ceiling. TFP171 Page 5 of 10 SPRINKLER FINISH (See Note 5) K FACTOR TYPE TEMPERATURE BULB LIQUID COLOR NATURAL BRASS CHROME PLATED POLYESTER*** 135°F(57°C) Orange PENDENT (TY1231) 155°F (68°C) Red 175°F (79°C) Yellow and 1, 2, 3, 4 UPRIGHT (TY1131) 200°F (93°C) Green 286°F (141°C) Blue 135°F(57°C) Orange 2.8 1/2" NPT RECESSED PENDENT 155°F (68°C) Red 175°F (79°C) Yellow (TY1231)* Figure 8 200°F (93°C) Green 1,2,4 135°F(57°C) Orange RECESSED PENDENT 68°C°F55 1( ) Red (TY1231)** Figure 9 175°F (79°C) Yellow 200°F (93°C) Green 135°F(57°C) Orange PENDENT (TY2231) 155°F (68°C) Red 175°F (79°C) Yellow and UPRIGHT (TY2131) 200°F (93°C) Green 286°F (141°C) Blue 135°F(57°C) Orange 4.2 1/2" NPT RECESSED I PENDENT 1,2 155°F (68°C) Red 175°F (79°C) Yellow (TY2231)* Figure 10 200°F (93°C) I Green 135°F(57°C) Orange RECESSED PENDENT ° ° 155 F (68 C) Red (TY2231)** Figure 11 175°F (79°C) Yellow 200°F (93°C) Green NOTES: 1. Listed by Underwriters Laboratories, Inc., (UL) as Quick Response Sprinklers. 2. Listed by Underwriters Laboratories, Inc., for use in Canada (C-UL) as Quick Response Sprinklers. 3. Approved by Factory Mutual Research Corporation (FM) as Quick Response Sprinklers. 4. Approved by the City of New York under MEA 354-01-E. 5. Where Polyester Coated Sprinklers are noted to be UL and C-UL Listed, the sprinklers are UL and C-UL Listed as Corrosion -Resistant Sprinklers. ` Installed with Style 10 (1/2" NPT) or Style 40 (3/4" NPT) 3/4" Total Adjustment Recessed Escutcheon, as applicable. " Installed with Style 20 (1/2" NPT) or Style 30 (3/4" NPT) 1/2" Total Adjustment Recessed Escutcheon, as applicable. "` Frame and Deflector only. N/A: Not Available TABLE A LABORATORY LISTINGS AND APPROVALS FOR 2.8 AND 4.2 K-FACTOR SPRINKLERS TFP171 Page 6of10 SPRINKLER FINISH (See Note 8) K FACTOR TYPE TEMPERATURE BULB LIQUID COLOR NATURAL BRASS I CHROME PLATED POLYESTER*** LEAD COATED PENDENT (TY3231) 135°F(57°C) Orange 155°F (68°C) Red 175°F (79°C) Yellow and 1, 2, 3, 4, 5, 6, 7 1, 2, 3, 5 UPRIGHT (TY3131) 200°F (93°C) Green 286°F (141°C) Blue 135°F(57°C) Orange 155°F (68°C) Red RECESSED 5.6 1/2" NPT PENDENT (TY3231)* 1, 2, 4, 5 N/A 175°F (79°C) Yellow 200°F (93°C) Green Figure 12 286°F (141°C) Blue 135°F(57°C) Orange 155°F (68°C) Red RECESSED PENDENT (TY3231)** 1, 2, 3, 4, 5 N/A 175°F (79°C) Yellow 200°F (93°C) Green Figure 13 286°F (141°C) Blue PENDENT (TY4231) 135°F(57°C) Orange 155°F (68°C) Red 175°F (79°C) Yellow and 1, 2, 3, 4, 5, 6, 7 1, 2, 5 UPRIGHT (TY4131) 200°F (93°C) Green 286°F (141°C) Blue 135°F(57°C) Orange 155°F (68°C) Red RECESSED 8.0 3/4" NPT PENDENT (TY4231)* 1, 2, 5 N/A 175°F (79°C) Yellow 200°F (93°C) Green Figure 14 286°F (141°C) Blue 135°F(57°C) Orange 155°F (68°C) Red RECESSED PENDENT (TY4231)** 1, 2, 3, 5 N/A 175°F (79°C) Yellow 200°F (93°C) Green Figure 15 286°F (141°C) Blue 8.0 1/2" NPT PENDENT (TY4931) and UPRIGHT (TY4831) 135°F(57°C) Orange 1, 2, 4, 5, 6 1, 2, 5 155°F (68°C) Red 175°F (79°C) Yellow 200°F (93°C) Green 286°F (141°C) Blue NOTES: 1. Listed by Underwriters Laboratories, Inc., (UL) as Quick Response Sprinklers. 2. Listed by Underwriters Laboratories, Inc., for use in Canada (C-UL) as Quick Response Sprinklers. 3. Approved by Factory Mutual Research Corporation (FM) as Quick Response Sprinklers. 4. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 007k/04) as Quick Response Sprinklers. However, LPCB does not rate the thermal sensitivity of recessed sprinklers. 5. Approved by the City of New York under MEA 354-01-E. 6. VdS Approved (For details, contact Tyco Fire Suppression & Building Products, Enschede, Netherlands, Tel. 31-53-428-4444/Fax 31-53-428-3377.) 7. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 094a/06) as Quick Response Sprinklers. 8. Where Polyester Coated and Lead -Coated Sprinklers are noted to be UL and C-UL Listed, the sprinklers are UL and C-UL Listed as Corrosion -Resistant Sprinklers. Where Lead -Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as a Corrosion -Resistant Sprinklers. Installed with Style 10 (1/2" NPT) or Style 40 (3/4" NPT) 3/4" Total Adjustment Recessed Escutcheon, as applicable. " Installed with Style 20 (1/2" NPT) or Style 30 (3/4" NPT) 1/2" Total Adjustment Recessed Escutcheon, as applicable. *** Frame and Deflector only. N/A: Not Available TABLE B LABORATORY LISTINGS AND APPROVALS FOR 5.6 AND 8.0 K-FACTOR SPRINKLERS TFP171 Page 7 of 10 SPRINKLER FINISH K TYPE NATURAL I CHROME POLYESTER LEAD FACTOR BRASS PLATED COATED PENDENT (TY1231) and 2.8 UPRIGHT (TY1131) 1/2" NPT 175 PSI (12,1 BAR) N/A RECESSED PENDENT (TY1231) PENDENT (TY2231) and 4.2 UPRIGHT (TY2131) 1/2" NPT 175 PSI (12,1 BAR) N/A RECESSED PENDENT (TY2231) PENDENT (TY3231) and 5.6 UPRIGHT (TY3131) SI (1(12,BAR) 1/2" NPT OR 105 1 BAR) RECESSED (SEE NOTE 1) PENDENT (TY3231) PENDENT (TY4231) 175 PSI 8.0 and UPRIGHT (TY4131) (12,1 BAR) 3/4" NPT 175 PSI (12,1 BAR) RECESSED N/A PENDENT (TY4231) 8.0 PENDENT (TY4931) 175 PSI 1/2" NPT and 175 PSI (12,1 BAR) (12,1 BAR) UPRIGHT (TY4831) NOTES: 1. The maximum working pressure of 250 psi (17,2 bar) only applies to the Listing by Underwriters Laboratories Inc. (UL); the Listing by Under- writers Laboratories, Inc. for use in Canada (C-UL); and, the Approval by the City of New York. TABLE C MAXIMUM WORKING PRESSURE Care and Maintenance The TYCO Series TY-FRB must be maintained and serviced in accordance with this section. Before closing a fire protection system main control valve for maintenance work on the fire protection system that it controls, obtain permission to shut down the affected fire protection systems from the proper authorities and notify all personnel who may be affected by this action. Absence of the outer piece of an escutcheon, which is used to cover a clearance hole, can delay sprinkler operation in a fire situation. Sprinklers which are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated, or other- wise altered after leaving the factory. Modified sprinklers must be replaced. Sprinklers that have been exposed to corrosive products of combustion, but have not operated, should be replaced if they cannot be completely cleaned by wiping the sprinkler with a cloth or by brushing it with a soft bristle brush. Care must be exercised to avoid damage to the sprinklers before, during, and after installation. Sprin- klers damaged by dropping, striking, wrench twist/slippage, or the like, must be replaced. Also, replace any sprin- kler that has a cracked bulb or that has lost liquid from its bulb. (Ref. Installa- tion Section.) The owner is responsible for the inspection, testing, and maintenance of their fire protection system and devices in compliance with this document, as well as with the applicable standards of the National Fire Protection Asso- ciation (e.g., NFPA 25), in addition to the standards of any other authorities having jurisdiction. Contact the install- ing contractor or sprinkler manufac- turer regarding any questions. Automatic sprinkler systems are rec- ommended to be inspected, tested, and maintained by a qualified Inspec- tion Service in accordance with local requirements and/or national codes. Care must be exercised to avoid damage to the sprinklers -before, during, and after installation. Sprin- klers damaged by dropping, striking, wrench twist/slippage, or the like, must be replaced. Also, replace any sprin- kler that has a cracked bulb or that has lost liquid from its bulb. (Ref. Installa- tion Section). Initial and frequent visual inspections of random samples are recommended for corrosion -resistant sprinklers to verify the integrity of the corrosion -resistant material of construction. Thereafter, annual inspections per NFPA 25 should suffice. Inspections of corrosion -resistant sprinklers are recommended at close range, instead of from the floor level per NFPA. Inspection at close range can better determine the exact sprin- kler condition and the long-term integ- rity of the corrosion -resistant material, which can be affected by the corrosive conditions present. TFP171 Page 8of10 5/8±1/4" (15,9±6,4 mm) FACE OF SPRINKLER FITTING MOUNTING SURFACE 2-7/8" DIA. _ (73,0 mm) 3/4" (19,1 mm) 2-1/4" DIA. 1/4" (6,4 mm) (57,2 mm) MOUNTING /r PLATE CLOSURE SERIES TY-FRB i rl:,� 1/8" (3,2 mm) 1-5/16" (33,3 mm) 13/16" (20,6 mm) FIGURE 8 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 314 INCH TOTAL ADJUSTMENT STYLE 10 RECESSED ESCUTCHEON 2.8 K-FACTOR, 112 INCH NPT 2-7/8" DIA. 5/8±1/4" (73,0 mm) 3/4" (19,1 mm) (15,9±6,4 mm) 2-1/4" DIA. 1/4" (6,4 mm) FACE OF (57,2 mm) MOUNTING SPRINKLER PLATE FITTING 1/8" (3,2 mm) MOUNTING SURFACE CLOSURE SERIES 1-1/4" (31,8 mm) TY-FRB 3/4" (19,1 mm) FIGURE 10 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 314 INCH TOTAL ADJUSTMENT STYLE 10 RECESSED ESCUTCHEON 4.2 K-FACTOR, 112 INCH NPT 1/2±1/8" (12,7±3,2 mm) FACE OF SPRINKLER FITTING r \ MOUNTING SURFACE CLOSURE _ 2-7/8" DIA. (73,0 mm) 1/2" (12,7 mm) 2-1/4" DIA. 1/4" (6,4 mm) (57,2 mm) MOUNTING PLATE 1/8" (3,2 mm) P77 7/. SERIES 1-5/16" (33,3 mm) TY-FRB 1-1/16" (27,0 mm) FIGURE 9 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 112 INCH TOTAL ADJUSTMENT STYLE 20 RECESSED ESCUTCHEON 2.8 K-FACTOR, 112 INCH NPT 1/2±1/8" (12,7±3,2 mm) FACE OF SPRINKLER FITTING r \ MOUNTING SURFACE 2-7/8" DIA. (73,0 mm) 1/2" (12,7 mm) 2-1/4" DIA. 1/4" (6,4 mm) (57,2 mm) MOUNTING PLATE CLOSURE SERIES TY-FRB 1/8" (3,2 mm) P77 7, 1-1/4" (31,8 mm) 1 " (25,4 mm) FIGURE 11 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 112 INCH TOTAL ADJUSTMENT STYLE 20 RECESSED ESCUTCHEON 4.2 K-FACTOR, 112 INCH NPT TFP171 Page 9 of 10 5/8±1/4" (15,9±6,4 mm) FACE OF SPRINKLER FITTING MOUNTING SURFACE 2-7/8" DIA. (73,0 mm) 3/4" (19,1 mm) 2-1/4" DIA. 1/4" (6,4 mm) (57,2 mm) MOUNTING PLATE CLOSURE SERIES TY-FRB 1 1/8" t (3,2 mm) 1-1/4" (31,8 mm) 3/4" (19,1 mm) FIGURE 12 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 314 INCH TOTAL ADJUSTMENT STYLE 10 RECESSED ESCUTCHEON 5.6 K-FACTOR, 112 INCH NPT 2-7/8" DIA. 5/8+1/4" (73,0 mm) 3/4" (19,1 mm) (15,9±6,4 mm) 2-1/4" DIA. 1/4" (6,4 mm) FACE OF (57,2 mm) MOUNTING SPRINKLER PLATE FITTING 1/8" (3,2 mm) MOUNTING SURFACE CLOSURE SERIES 1-5/16" (33,3 mm) TY-FRB 13/16" (20,6 mm) FIGURE 14 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 314 INCH TOTAL ADJUSTMENT STYLE 40 RECESSED ESCUTCHEON 8.0 K-FACTOR, 314 INCH NPT 1/2±1/8" (12,7±3,2 mm) FACE OF SPRINKLER FITTING i \ MOUNTING SURFACE CLOSURE _ 2-7/8" DIA. (73,0 mm) 1/2" (12,7 mm) 2-1/4" DIA. 1/4" (6,4 mm) (57,2 mm) MOUNTING PLATE 1/8" (3,2 mm) P77 Z. SERIES 1-1/4" (31,8 mm) TY-FRB 1 " (25,4 mm) FIGURE 13 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 112 INCH TOTAL ADJUSTMENT STYLE 20 RECESSED ESCUTCHEON 5.6 K-FACTOR, 112 INCH NPT 2-7/8" DIA. 1/2±1/8" (73,0 mm) 1/2" (12,7 mm) (12,7±3,2 mm) 2-1/4" DIA. 1/4" (6,4 mm) FACE OF (57,2 mm) MOUNTING SPRINKLER PLATE FITTING 1/8" (3,2 mm) 0 F77, MOUNTING SURFACE CLOSURE SERIES 1-5/16" (33,3 mm) TY-FRB 1-1/16" (27,0 mm) FIGURE 15 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 112 INCH TOTAL ADJUSTMENT STYLE 30 RECESSED ESCUTCHEON 8.0 K-FACTOR, 314 INCH NPT TFP171 Page 10 of 10 P/N 57 - XXX - X - XXX SIN 330 2.8K UPRIGHT (1/2"NPT) TY1131 331 2.8K PENDENT (1/2"NPT) TY1231 340 4.2K UPRIGHT (1/2"NPT) TY2131 341 4.2K PENDENT (1/2"NPT) TY2231 370 5.6K UPRIGHT (1/2"NPT) TY3131 371 5.6K PENDENT (1/2"NPT) TY3231 390 8.OK UPRIGHT (3/4"NPT) TY4131 391 8.OK PENDENT (3/4"NPT) TY4231 360 8.OK UPRIGHT (1/2"NPT) TY4831* 361 8.OK PENDENT (1/2"NPT) TY4931* SPRINKLER FINISH 1 NATURAL BRASS 3 PURE WHITE POLYESTER (RAL9010)t 4 SIGNAL WHITE POLYESTER (RAL9003) 5 JET BLACK POLYESTER (RAL9005)2 7 LEAD COATED 9 1 CHROME PLATED TEMPERATURE RATINGS 135 135°F (57°C) 155 155°F(68°C) 175 175-F(79°C) 200 200°F (93°C) 286 286°F (141°C) NOTES: 1. Eastern Hemisphere sales only. 2. Available in only 2.8K, 4.2K, and 8.OK, 155°F (68°C) and 200°F (93°C); requires lead time to manufacture. TABLE D SERIES TY-FRB PENDENT AND UPRIGHT SPRINKLERS PART NUMBER SELECTION Limited Warranty For warranty terms and conditions, visit www.tyco-fire.com. Ordering Procedure Contact your local distributor for availability. When placing an order, indicate the full product name and Part Number (P/N). Sprinkler Assemblies with NPT Thread Connections Specify: Series TY-FRB (Specify SIN), (specify K-factor), (specify Pendent or Upright) Sprinkler (specify) temperature rating, (specify) finish or coating, P/N (specify from Table D) Recessed Escutcheon Specify: Style (10, 20, 30, or 40) Recessed Escutcheon with (specify*) finish, P/N (specify*) Sprinkler Wrench Specify: W-Type 6 Sprinkler Wrench, P/N 56-000-6-387 Specify: W-Type 7 Sprinkler Wrench, P/N 56-850-4-001 * Refer to Technical Data Sheet TFP770 GLOBAL HEADQUARTERS 11400 Pennbrook Parkway, Lansdale, PA 19446 1 Telephone +1-215-362-0700 Copyright © 2015 Tyco Fire Products, LP. All rights reserved. tl�CO TEFLON is trademark of The DuPont Corporation. Fire Protection Products Z Domestic Water System Flow Analysis Coachella Valley Water District 75515 Hovley Lane East Palm Desert, CA 92211 Domestic Water System Flow Analysis (Hydraulic Model) Requested By: SOUTHWEST FIRE PROS Date: 7/16/20 Address: 31410 RESERVE DR. #2 THOUSAND PALMS, CA 92276 APN: 774-204-029 Req. Fire Flow: 1500gpm at 20psi fort hours. Contact Name: CURT CARRICO Project Name: PEPE BUILDS RESIDENCE Phone: 760.343.2233 Email: curtis@swfirepros.com Cell: 760.668.7744 Domestic Water System Flow Analysis Location: FIRE FLOW ANALYSYS-HYDRANT CLOSEST TO 54050 AVENIDA OBREGON, LA QUINTA, GEO 6-6- 13-2, PZ 20-11213 Flow Analysis Description Model Information ' ' ' Requested + Test 1 Test 2 Test 3 Test 4 Flow Domestic Elevation (Ft): 260 system flow available without Steady State, Dynamic (psi): 100.84 Residual Pressure (psi): 86.33 Fire Flow Tested (gpm): 750 N/A exceeding CVWD's Combined Total: N/A criteria. Tested Model Junction: J2904 Duration: 2 hours Demand Conditions: Peak Day Demand (PDD) Reservoir No./Level (s): Reservoir 6632/10.92' Pumps Operating No's: Pumps On Pressure Zone and HGL: Upper La Quinta (482') Model: I Working 5-9-19-CVWD-DomesticWater 012616 Comments: The domestic water system is capable of providing 750 gpm for 2 hours that satisfies CVWD's minimum pressure, velocity, and/or head loss criteria. This simulated system flow analysis may not include all facilities that may be required for this development/project. Please check with Development Services for further information on all required facilities. The theoretical flow to drop the residual pressure to 20 psi is 2,050 gpm. Please note the theoretical flow exceeds CVWD's design criteria on the domestic water network. These results are based on hydraulic modelling and not a guarantee that CVWD's domestic water system will have the capacity to supply water to the project at the flows or pressures indicated. It is important to note that the capacity of the on -site fire system, meters, service lines, backflow assemblies and other appurtenances were not considered in this analysis, which may alter actual flows or pressures. Due to continuous changes in the system, CVWD only considers this system flow analysis valid for six months from date of modelling/analysis. These system flow analysis comments are for plan check purposes only. The ultimate design responsibility resides with the Engineer -of -Record for this Project. Should you have any questions or need additional information, please contact me at (760) 398-2661, ext. 2397. Completed By: Date: z Page 1 of 1 ENG DS-016 (8/31/15) 3NIl Inn -------------------------------------------------------------------------------- -----. 1 - ft - 9 - 9 4 - it - 9 - 9 i I I I I I I I I I I I f I I � `------------'-"--------------------------- OFFICE USE ONLY: REVIEW DATE: ca Qul & . ❑ APPROVED ❑ CORRECTIONS CALIFORNIA% - w CALLED FOR PICKUP: DESIGN & DEVELOPMENT DEPARTMENT 78-495 Calle Tampico PICKED UP: La Quinta, California 92253 (760) 777-7125 / FAX (760) 777-7011 FIRE REVIEW APPLICATION El SUBMITTAL # 0 REVISION # PERMIT NO. APPLICANT/OWNER INFORMATION Applicant Name: MAUREEN CO Owner Name: PEPE BUILDS Mailing Address: 31-410 RESERVE DR., STE Site Address: 54050 AVENIDA OBREGO Phone Number: 760-343-2233 Project FIRE SPRINKLER, #25 Email: MAUREEN@SWFIREPROS Description: (Include # of sprinkler heads) Pursuant to a Cooperative Agreement to Provide Fire Services, the Riverside County Fire Department serves as the City's fire department, and the County designee serves as the City's fire chief. Applicant recognizes this contracted arrangement and shall comply with County Fire Department directions. CONTRACTOR INFORMATION Contractor Name: SOUTHWEST FIRE PROS Contractor #: 1005165 Signature: 14 /V / Contact Person: MAUREEN CO Mailing Address: 31410 RESERVE DR., STE Print Name: MAUREEN CO City, State, Zip: THOUSAND PALMS, CA 9'd Phone Number: 760-343-2233 Business License #: LIC-767387 Email Address: MAUREEN@SWFIREPRO: A. APPLICATION TYPE FIRE SPRINKLER SYSTEM STORAGE TANKS NEW COMMERCIAL/INDUSTRIAL ------------ ❑ DISPENSERS ONLY HOURLY@161/HR ❑ 0-35,000 SO FT $670 ❑ ABOVE GROUND HOURLY@161/HR ❑ 35,001-75,000 SO FT $791 SUPRESSION SYSTEM ❑ 75,001-120,000 SO FT ❑ 120,001 AND UP $992 $1234 ❑ HOOD & DUCT ❑ SPRAY BOOTH $418 HOURLY@161/HR ❑ TENANT IMPROVEMENTS - FIRE SPRINKLER $418 ❑ OTHER SUPRESSION SYSTEM HOURLY@161/HR ❑ RESIDENTIAL SPRINKLER SYSTEMS ------------ MASTER PLAN O 1-50 SPRINKLER HEADS $418 ❑ MASTER PLAN HOURLY@161/HR ❑ 51-100 SPRINKLER HEADS $498 MISC ❑ OVER 100 SPRINKLER HEADS $579 ❑ HAZMAT HOURLY@161/HR ❑ RESIDENTIAL TRACT HOME (EA.) ADDITIONAL ------------- ❑ HIGH PILE RACK STORAGE HOURLY@161/HR ❑ 1-50 SPRINKLER HEADS ❑ 51-100 SPRINKLER HEADS $176 $257 ❑ PRIVATE FIRE MAINS ❑ TECHNICAL REPORT RESEARCH $901 HOURLY@161/HR ❑ OVER 100 SPRINKLER HEADS $337 ❑ MULTI -FAMILY Q OR MORE) $590 FIRE ALARM SYSTEM ❑ COMMERCIAL - SPRINKLER MONITORING $418 ❑ FIRE PUMPS ❑ STANDPIPE SYSTEMS ❑ WATER TANKS $659 $579 $418 $740 ❑ COMMERCIAL - FIRE ALARM SYSTEM Fnrh n n6rnrinn r,. i—I-A ,. T,.,.ti..,.i.._.. $1062 10PYRO THER HOURLY@161/HR -...._..__..._..-- _- ,,.. I ,., « - ,.v u, ;Iu Ktvlltu 1U/1/1U1y 'For permits billed at an hourly rate, these fees will be added at time of payment. CAL FIRE - RIVERSIDE UNIT RIVERSIDE COUNTY FIRE DEPARTMENT OFFICE OF THE FIRE MARSHAL — LA QUINTA CALIFORNIA 78495 Calle Tampico, La Quinta, CA 92253 • Phone (760) 777-7074 • www.rvcfire.org August 27, 2020 Southwest Fire Pros 31410 Reserve Drive #2 Thousand Palms, CA 92276 Re: Residential Fire Sprinkler Plan Review — PEPE BUILDS FSS2020-0108 / 54050 AVENIDA OBREGON, LA QUINTA, CA 92253 The sprinkler plans you submitted for the above referenced project have been reviewed by Riverside County Fire Department - Office of the Fire Marshal personnel and are approved with the following conditions. Permanently marked identification signs shall be attached to all control valves. The following inspections/tests are required to be witnessed by Office of the Fire Marshal Staff: (a) Overhead Rough and Hydro static test: All piping shall be visible and pumped at normal operating pressure. *No jacketed electrical and data wiring shall be in contact with, nor have the potential to contact CPVC piping once insulation is installed. (b) Final inspection The Fire Department approved plans and conditions letter must be at the job site. Applicant/installer shall be responsible to contact the Fire Department to schedule inspections. Requests for inspections are to be made at least 48 hours in advance and may be arranged by calling (760)777-7131. All questions regarding the meaning of these conditions should be referred to the Office of the Fire Marshal staff at (760)777-7074. Kohl Hetrick - Fire Safety Specialist It it RIVERSIDE COUNTY FIRE PROTECTION PLANNING 0 RECORD OF INSPECTIONS / PERMIT CARD CVGICt/ THIS CARD IS TO REMAIN ON SITE AT ALL TIMES. - cALLroRMA - INSTALLING CONTRACTOR MUST BE PRESENT FOR ALL INSPECTIONS. SEE NOTES ON REVERSE SIDE. JOB ADDRESS: 54050 AVENIDA OBREGON PERMIT#: FSS2020-0108 DATE ISSUED: 8/27/2020 DESCRIPTION: RES. FIRE SPRINKLER CONTRACTOR: SOUTHWEST FIRE PROS HYDRANT SYSTEM DATE INITIALS SPECIAL SUPPRESSION DATE INITIALS Thrust block pre -pour Door fan test UG rough piping Abort test UG hydro Mechanical shutdown Flush Detector test Final EF Deluge/pre-action SPRINKLER U.G. Final EF Thrust block pre -pour UST/AST TANK UG rough piping Installation UG hydro Removal Flush Emergency shut off Final EF Primary piping FIRE SPRINKLER Secondary piping Weld inspection Dispensers & shear valves Overhead rough piping Final EF Overhead hydro MISC. INSPECTIONS UG flush / OK to connect Spray booths Main drain/inspectors' test Hood/duct extinguishing High pile storage High pile rack storage In -rack sprinklers H.P. vents/access/corridors Hose racks Tract access/hydrant verification Final EF Access & Address verification HOOD EXTINGUISHING OTHER CONST. PERMIT Detection system Function test Gas/electrical shut-off Nozzle model/placement Fire alarm connection Final E F SPRAY BOOTHS FIRE CODE PERMIT(S) Installation Air flow test Mechanical interlock Extinguishing system Fire alarm connection Final EF FIRE ALARM KNOX SYSTEM Rough -wire inspection Building Knox box Function test Gate access Knox box/padlock Duct detectors/velocity BUILDING INSPECTIONS 24 hr. battery test T/I final Sprinkler monitoring Shell final Final EF Final for occupancy 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 FINAL INSPECTION DATE: INSPECTORS SIGNATURE: **WHEN CALLING FOR AN INSPECTION PLEASE HAVE PERMIT NUMBER READY. SEE NOTES ON REVERSE SIDE** 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 INSPECTION NOTES 1. Sway bracing and hangers will be inspected at the time of rough piping inspection. 2. All required hydrostatic pressure tests shall maintain 200 psi for a 2-hour duration. (EX: Residential Fire Sprinkler Systems) 3. Fire sprinkler system remodels: if indicated on plans or this card, a hydrostatic pressure test shall be required. 4. All underground joints and thrusts blocks shall be exposed and readily visible during the hydrostatic test. 5. Contractor shall supply all testing equipment, access and operating instructions at time of test. 6. All systems shall be inspected, tested, and approved by a Fire Inspector before any work is started that may cause the affected system to be covered or hidden. POLICIES ON FIELD INSPECTIONS A. INSPECTION REQUESTS: Inspections are made subject to availability. Please have the permit number available when scheduling inspectionr-. For City of La Quinta inspections call: (760) 777-7131. B. APPROVED PLANS: Shall be kept on the job site at all times that work is in progress. Work shall NOT commence without approved plans. C. INSPECTION REQUESTS: As required by the California Fire Code, the appropriate installing contractor shall be required to schedule the necessary inspections and be present on site for inspections. D. RE -INSPECTIONS: Will be charged against a permit when an inspection has failed, is not ready, the responsible party not on site or where previously noted corrections have not been completed. E. COMMODITIES: Unless otherwise noted on approved plans or letter of conditions, no commodities shall be entered into the structure until clearance has been granted by the Fire Dept and Building Official. F. OCCUPANCY: Buildings shall NOT be occupied by persons other than construction workers until a Final Fire Clearance has been granted by the Fire Dept and a Certificate for Occupancy has been issued by the Building Official. INSPECTION NOTES: THIS CARD IS REQURIED TO BE POSTED AT THE CONSTRUCTION SITE. THIS CARD AND APPROVED PLANS MUST BE AVAILABLE AT THE CONSTRUCTION SITE FOR ALL INSPECTIONS. THIS PERMIT SHALL EXPIRE AND BECOME NULL AND VOID IF THE WORK AUTHORIZED IS NOT COMMENCED WITHIN 180 DAYS OR IF THE WORK IS SUSPENDED OR ABANDONED FOR A PERIOD OF 180 DAYS OR MORE. 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 THIS PERMIT IS FOR FIRE DEPARTMENT APPROVAL ONLY AND DOES NOT INTEND TO ABROGATE MORE RESTRICTIVE REQUIREMENTS OF OTHER AGENCIES HAVING RESPONSIBILITY. 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131