Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
FSS2021-0046
ADDITIONAL SITES CHRONOLOGY CONTACTS NAME TYPE NAME ADDRESS1 CITY STATE ZIP PHONE FAX EMAIL APPLICANT nicholas Domnick 16224 space drive moreno valley CA 925511 (951)807-1347 NICKNAFP@MSN.COM CHRONOLOGY TYPE STAFF NAME ACTION DATE COMPLETION DATE NOTES NOTE JULIA AGGREH 3/24/2022 3/25/2022 CONTRACTOR REQUESTED FINAL INSPECTION. PERMIT EXPIRED AS OF 83/12/22 (6 MOS FROM DATE OF LAST APPROVED INSPECTION). ADDED EXTENSION FEE OF $83 AND EXTENDED PERMIT TO 3/28/22 SO CONTRACTOR CAN PAY FEE VIA ETRAKIT. WILL ALSO REQUIRE AN EXTENSION REQUEST LETTER FROM CONTRACTOR. OK TO EXTEND PER KOHL. CONDITIONS Description: FIRE SPRINKLER SYSTEM Type: FIRE SPRINKLER (WEB)Subtype: RESIDENTIAL - CUSTOM HOMES Status: FINALED Applied: 3/10/2021 EPRS Parcel No: 777140014 Site Address: 52605 VIA DONA LA QUINTA,CA 92253 Approved: 3/23/2021 KHET Subdivision: TR 29894-2 Block: Lot: 154 Issued: 8/26/2021 AMA Lot Sq Ft: 0 Building Sq Ft: 0 Zoning: Finaled: 3/30/2022 LIN Valuation: $4,100.00 Occupancy Type: Construction Type: Expired: No. Buildings: 0 No. Stories: 0 No. Unites: 0 Details: Fire Sprinkler Residential Printed: Monday, February 27, 2023 3:31:38 PM 1 of 4 Permit Details City of La Quinta PERMIT NUMBER FSS2021-0046 CONTACTS NAME TYPE NAME ADDRESS1 CITY STATE ZIP PHONE FAX EMAIL BILL TO NICHOLAS DOMNICK FIRE PROTECTION 16224 SPACE DR MORENO VALLEY CA 92551 (951)807-1347 NICK@NDFIREPROTECT ION.COM CONTRACTOR NICHOLAS DOMNICK FIRE PROTECTION 16224 SPACE DR MORENO VALLEY CA 92551 (951)807-1347 NICK@NDFIREPROTECT ION.COM OWNER MR HASKE 16224 space drive moreno valley CA 925511 (951)807-1347 NICKNAFP@MSN.COM INSPECTIONS SEQID INSPECTION TYPE INSPECTOR SCHEDULED COMPLETED RESULT REMARKS NOTES FINANCIAL INFORMATION DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE RECEIPT #CHECK #METHOD PAID BY CLTD BY FIRE PLAN REVISION SUBMITTALS 101-0000-42420 0 $161.00 $161.00 3/23/22 WEB11096 636126688 71 CREDIT nicholas Domnick EPRS FIRE SPRINKLER SYSTEMS - SINGLE FAMILY DETACHED 101-0000-42421 0 $242.00 $242.00 8/26/21 WEB9136 632145095 13 CREDIT nicholas Domnick EPRS FIRE SPRINKLER SYSTEMS - SINGLE FAMILY DETACHED PC 101-0000-42420 0 $242.00 $242.00 8/26/21 WEB9136 632145095 13 CREDIT nicholas Domnick EPRS FIRE STAFF - PER HOUR 101-0000-42420 1 $83.00 $83.00 3/25/22 WEB11144 636177491 77 CREDIT nicholas Domnick EPRS Total Paid for FIRE FEES: $728.00 $728.00 RECORDS MANAGEMENT FEE 101-0000-42416 0 $10.00 $10.00 8/26/21 WEB9136 632145095 13 CREDIT nicholas Domnick EPRS Total Paid for RECORDS MANAGEMENT FEE: $10.00 $10.00 TECHNOLOGY ENHANCEMENT FEE 502-0000-43611 0 $5.00 $5.00 8/26/21 WEB9136 632145095 13 CREDIT nicholas Domnick EPRS Total Paid for TECHNOLOGY ENHANCEMENT FEE: $5.00 $5.00 TOTALS:$743.00 $743.00 Printed: Monday, February 27, 2023 3:31:38 PM 2 of 4 Permit Details City of La Quinta PERMIT NUMBER FSS2021-0046 ATTACHMENTS Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED DOC 3/10/2021 EtrakitPublicReg 1ST SUBMITTAL - HYDRAULIC CALC 1 HASKE RES 1 HEAD CALC.PDF 1 DOC 3/10/2021 EtrakitPublicReg 1ST SUBMITTAL - HYDRAULIC CALC 2 haske res calc.PDF 1 DOC 3/10/2021 EtrakitPublicReg 1ST SUBMITTAL - FIRE SPRINKLER PLAN HASKE RES FIRE 1 OF 2.pdf 1 DOC 3/10/2021 EtrakitPublicReg 1ST SUBMITTAL - FIRE SPRINKLER PLAN 2 HASKE RES FIRE 2 OF 2.pdf 1 DOC 3/10/2021 EtrakitPublicReg 1ST SUBMITTAL - CONCELED HEAD LFII CONCEALED.pdf 1 BOND INFORMATION DATE DATE OVERHEAD HYRO KHET 9/13/2021 9/13/2021 APPROVED OVERHEAD ROUGH PIPING KHET 9/13/2021 9/13/2021 APPROVED SEE NOTES Revised plans and calculations are required prior to final inspection request. Review and revision fees are applicable. *See attachments for inspection notes. FIRE FINAL**LIN 3/30/2022 3/30/2022 APPROVED REVIEWS REVIEW TYPE REVIEWER SENT DATE DUE DATE RETURNED DATE STATUS REMARKS NOTES 1ST FIRE (2 WK)KOHL HETRICK 3/10/2021 3/24/2021 3/23/2021 APPROVED SEE ATTACHMENTS 1ST PERMIT TECH (1 DAY) ARMANDO MAGALLON 3/10/2021 3/11/2021 3/10/2021 COMPLETE 2ND FIRE (1 WK)KOHL HETRICK 9/17/2021 9/24/2021 9/27/2021 APPROVED SEE ATTACHMENTS PARENT PROJECTS Printed: Monday, February 27, 2023 3:31:38 PM 3 of 4 Permit Details City of La Quinta PERMIT NUMBER FSS2021-0046 ATTACHMENTS Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED DOC 3/10/2021 EtrakitPublicReg 1ST SUBMITTAL - PENDANT SPRINKLER HEAD LFII SEMI 4.9.pdf 1 DOC 3/10/2021 EtrakitPublicReg 1ST SUBMITTAL - WATER FLOW residential connection charge form.pdf 1 DOC 3/23/2022 Etrakit Public Registration permit extention letter laquinta permit extention letter.pdf 1 DOC 3/23/2021 KOHL HETRICK FSS2021-0046 - APPROVED PLANS AND CALCS.pdf FSS2021-0046 - APPROVED PLANS AND CALCS.pdf 1 DOC 3/23/2021 KOHL HETRICK FSS2021-0046 - COA AND JOB CARD.pdf FSS2021-0046 - COA AND JOB CARD.pdf 1 DOC 9/13/2021 KOHL HETRICK Pages from FSS2021- 0046 - INSP NOTES.pdf Pages from FSS2021- 0046 - INSP NOTES.pdf 1 DOC 9/20/2021 KOHL HETRICK FSS2021-0046 - REVISED PLAN SUBMITTAL.pdf FSS2021-0046 - REVISED PLAN SUBMITTAL.pdf 1 DOC 9/20/2021 KOHL HETRICK AS BUILT CALCS.PDF AS BUILT CALCS.PDF 1 DOC 9/27/2021 KOHL HETRICK FSS2021-0046 - APPROVED AS-BUILT PLANS.pdf FSS2021-0046 - APPROVED AS-BUILT PLANS.pdf 1 Printed: Monday, February 27, 2023 3:31:38 PM 4 of 4 Permit Details City of La Quinta PERMIT NUMBER FSS2021-0046 FSS2021-0046 - AS-BUILTS , HYDRAULIC CALCULATIONS FOR LOT 154 THE HIDEAWAY LA QUINTA, CA AS BUILT CALCULATIONS FILE NUMBER: 9254 DATE: JUL 31, 2021 -DESIGN DATA- OCCUPANCY CLASSIFICATION: RESIDENTIAL DENSITY: .05 gpm/sq. ft. AREA OF APPLICATION: 500 sq. ft. COVERAGE PER SPRINKLER: 256 sq. ft. NUMBER OF SPRINKLERS CALCULATED: 2 sprinklers TOTAL SPRINKLER WATER FLOW REQUIRED: 26.1 gpm TOTAL WATER REQUIRED (including hose): 31.2 gpm FLOW AND PRESSURE (@ BOR): 31.1 gpm @ 55.3psi SPRINKLER ORIFICE SIZE: 7/16 inch NAME OF CONTRACTOR: NICHOLAS DOMNICK FIRE PROTECTION DESIGN/LAYOUT BY: NICK AUTHORITY HAVING JURISDICTION: LA QUINTA FIRE DEPARTMENT CONTRACTOR CERTIFICATION NUMBER: C-16 # 682276 ALL RUN TEES ADDED IN EQUIVELANT FEET OF PIPE SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 2DATE: 7/31/2021 C:\USERS\NICKN\HASKE 154.SDFJOB TITLE: LOT 154 HIDEAWAY WATER SUPPLY ANALYSIS Static: 104.76 psi Resid: 70.13 psi Flow: 34.0 gpm -14.7 0.0 20.0 40.0 60.0 80.0 100.0 120.0 20 30 40 50 60 70 80 90 100 FLOW (GPM) Note: (1) Dashed Lines indicate extrapolated values from Test Results G A U G E P R E S S U R E ( p s i ) A 1 2 B LEGEND 1 Available pressure 75.27 psi @ 31.2 gpm 2 Required pressure 69.39 psi @ 31.2 gpm A. Source Supply Curve B. System Demand Curve SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 3DATE: 7/31/2021 C:\USERS\NICKN\HASKE 154.SDFJOB TITLE: LOT 154 HIDEAWAY NFPA WATER SUPPLY DATA SOURCE STATIC RESID. FLOW AVAIL. TOTAL REQ’D NODE PRESS. PRESS. @ PRESS. @ DEMAND PRESS. TAG (PSI) (PSI) (GPM) (PSI) (GPM) (PSI) SOURCE 104.8 70.1 34.0 75.3 31.2 69.4 AGGREGATE FLOW ANALYSIS: TOTAL FLOW AT SOURCE 31.2 GPMTOTAL HOSE STREAM ALLOWANCE AT SOURCE 0.0 GPMOTHER HOSE STREAM ALLOWANCES 5.0 GPMTOTAL DISCHARGE FROM ACTIVE SPRINKLERS 26.2 GPM NODE ANALYSIS DATANODE TAG ELEVATION NODE TYPE PRESSURE DISCHARGE NOTES (FT) (PSI) (GPM) M1 101.0 - - - - 64.5 - - - M2 101.0 - - - - 59.5 - - - UGA 101.0 - - - - 57.1 - - - DOM 102.0 - - - - 56.1 - - - BOR 103.0 - - - - 55.3 - - - TOR 113.0 - - - - 48.4 - - - 5 113.0 HOSE STREAM 45.5 5.0 6 113.0 - - - - 43.8 - - - 7 113.0 - - - - 35.4 - - - 8 117.0 - - - - 32.6 - - - 9 117.0 - - - - 24.0 - - - 10 113.0 - - - - 24.6 - - - 11 113.0 - - - - 20.5 - - - 12 113.0 - - - - 19.0 - - - 13 123.0 - - - - 12.8 - - - 14 123.0 - - - - 11.5 - - - 15 123.0 - - - - 7.5 - - - 100 123.0 K= 4.90 7.2 13.1 101 123.0 K= 4.90 7.0 13.0 SOURCE 100.0 SOURCE 69.4 31.2 SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 4DATE: 7/31/2021 C:\USERS\NICKN\HASKE 154.SDFJOB TITLE: LOT 154 HIDEAWAY NFPA PIPE DATA Pipe Tag K-fac Add Fl Add Fl To Fit: L C (Pt)Frm Node El (ft) PT (q) Node/ Nom ID Eq.Ln. F (Pe) NotesTo Node El (ft) PT Tot.(Q) Disch Act ID (ft.) T Pf/ft. (Pf) Pipe: 1 Source 0.0 15.00 150 4.9 SOURCE 100.0 69.4 31.2 M2 1.000 2E: 5.4 5.40 0.4 M1 101.0 64.5 31.2 1.025 20.40 0.219 4.5 Pipe: 2 0.0 Fixed Pressure Loss Device M1 101.0 64.5 31.1 UGA 5.0 psi, 31.1 gpm M2 101.0 59.5 31.1 Pipe: 3 0.0 0.0 80.00 150 2.4 M2 101.0 59.5 31.1 DOM 1.500 3E:18.1 18.13 -0.0 UGA 101.0 57.1 31.1 1.610 98.13 0.024 2.4 Pipe: 4 0.0 0.0 5.00 150 1.0 UGA 101.0 57.1 31.1 BOR 1.500 E: 6.0 18.13 0.4 DOM 102.0 56.1 31.1 1.610 T:12.1 23.13 0.024 0.6 Pipe: 5 0.0 0.0 2.00 150 0.8 DOM 102.0 56.1 31.1 TOR 1.500 2E:12.1 12.09 0.4 BOR 103.0 55.3 31.1 1.610 14.09 0.024 0.3 Pipe: 6 0.0 0.0 10.00 150 7.0 BOR 103.0 55.3 31.1 5 1.000 E: 7.0 7.00 4.3 TOR 113.0 48.4 31.1 1.101 17.00 0.154 2.6 Pipe: 7 H.S. 5.0 Disch 5.00 150 2.9 TOR 113.0 48.4 26.1 6 1.000 2E:14.0 14.00 -0.0 5 113.0 45.5 31.1 1.101 19.00 0.154 2.9 Pipe: 8 0.0 0.0 9.00 150 1.7 5 113.0 45.5 26.1 7 1.000 T: 6.0 6.00 -0.0 6 113.0 43.8 26.1 1.101 15.00 0.112 1.7 Pipe: 9 0.0 0.0 61.00 150 8.4 6 113.0 43.8 26.1 8 1.000 2E:14.0 14.00 -0.0 7 113.0 35.4 26.1 1.101 75.00 0.112 8.4 Pipe: 10 0.0 0.0 4.00 150 2.8 7 113.0 35.4 26.1 9 1.000 T: 6.0 6.00 1.7 8 117.0 32.6 26.1 1.101 10.00 0.112 1.1 Pipe: 11 0.0 0.0 57.00 150 8.6 8 117.0 32.6 26.1 10 1.000 2E:14.0 20.00 -0.0 9 117.0 24.0 26.1 1.101 T: 6.0 77.00 0.112 8.6 Pipe: 12 0.0 0.0 4.00 150 -0.6 9 117.0 24.0 26.1 11 1.000 T: 6.0 6.00 -1.7 10 113.0 24.6 26.1 1.101 10.00 0.112 1.1 SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 5DATE: 7/31/2021 C:\USERS\NICKN\HASKE 154.SDFJOB TITLE: LOT 154 HIDEAWAY Pipe Tag K-fac Add Fl Add Fl To Fit: L C (Pt)Frm Node El (ft) PT (q) Node/ Nom ID Eq.Ln. F (Pe) NotesTo Node El (ft) PT Tot.(Q) Disch Act ID (ft.) T Pf/ft. (Pf) Pipe: 13 0.0 0.0 24.00 150 4.1 10 113.0 24.6 26.1 12 1.000 E: 7.0 13.00 -0.0 11 113.0 20.5 26.1 1.101 T: 6.0 37.00 0.112 4.1 Pipe: 14 0.0 0.0 6.00 150 1.5 11 113.0 20.5 26.1 13 1.000 E: 7.0 7.00 -0.0 12 113.0 19.0 26.1 1.101 13.00 0.112 1.5 Pipe: 15 0.0 0.0 10.00 150 6.2 12 113.0 19.0 26.1 14 1.000 E: 7.0 7.00 4.3 13 123.0 12.8 26.1 1.101 17.00 0.112 1.9 Pipe: 16 0.0 0.0 5.00 150 1.2 13 123.0 12.8 26.1 15 1.000 T: 6.0 6.00 -0.0 14 123.0 11.5 26.1 1.101 11.00 0.112 1.2 Pipe: 17 0.0 13.0 101 30.00 150 4.0 14 123.0 11.5 13.1 100 1.000 T: 6.0 6.00 -0.0 15 123.0 7.5 26.1 1.101 36.00 0.112 4.0 Pipe: 18 0.0 0.0 4.00 150 0.3 15 123.0 7.5 13.1 Disch 1.000 E: 7.0 7.00 -0.0 100 123.0 7.2 13.1 1.101 11.00 0.031 0.3 Pipe: 19 0.0 0.0 10.00 150 0.5 15 123.0 7.5 13.0 Disch 1.000 T: 6.0 6.00 -0.0 101 123.0 7.0 13.0 1.101 16.00 0.031 0.5 NOTES (HASS): (1) Calculations were performed by the HASS 2020 D computer program in accordance with NFPA13 (2016) under license no. 64621467 granted by HRS Systems, Inc. 208 Southside Square Petersburg, TN 37144 (931) 659-9760 (2) The system has been calculated to provide an average imbalance at each node of 0.007 gpm and a maximum imbalance at any node of 0.134 gpm. (3) Total pressure at each node is used in balancing the system. Maximum water velocity is 12.1 ft/sec at pipe 1. (4) Items listed in bold print on the cover sheet are automatically transferred from the calculation report. (5) Available pressure at source node SOURCE under full flow conditions is SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 6DATE: 7/31/2021 C:\USERS\NICKN\HASKE 154.SDFJOB TITLE: LOT 154 HIDEAWAY 73.44 psi with a flow of 32.20 gpm. (6) PIPE FITTINGS TABLE HASS Pipe Table Name: standard.pip PAGE: F MATERIAL: CPVC HWC: 150Diameter Equivalent Fitting Lengths in Feet (in) F E T R K C G F45 Ell Tee RunT Kplg ChkVlv Gate 1.101 1.40 7.00 6.00 1.70 1.00 8.00 0.40 PAGE: * MATERIAL: S40 HWC: 120Diameter Equivalent Fitting Lengths in Feet (in) E T L C B G A D N Ell Tee LngEll ChkVlv BfyVlv GatVlv AlmChk DPVlv NPTee -------------------------------------------------------- F F45Ell 1.025 1.79 4.47 1.79 4.47 5.36 0.89 8.93 1.79 4.47 0.89 1.610 4.00 8.00 2.00 9.00 6.00 1.00 10.00 10.00 8.00 2.00 RAPID RESPONSE Series LFII Residential 4.9 K-factor Pendent Sprinkler Wet Pipe and Dry Pipe Systems Page 1 of 6 SEPTEMBER 2019 TFP400 IMPORTANT Refer to Technical Data Sheet TFP2300 for warnings pertaining to regulatory and health information. Always refer to Technical Data Sheet TFP700 for the “INSTALLER WARNING” that provides cautions with respect to handling and instal- lation of sprinkler systems and com- ponents. Improper handling and installation can permanently damage a sprinkler system or its compo- nents and cause the sprinkler to fail to operate in a fire situation or cause it to operate prematurely. Worldwide Contacts www.tyco-fire.com General Description TYCO RAPID RESPONSE Series LFII Residential 4.9K Pendent and Recessed Pendent Sprinklers (TY2234) are decorative, fast response, frangi- ble bulb sprinklers designed for use in residential occupancies such as homes, apartments, dormitories, and hotels. When aesthetics and optimized flow characteristics are the major con- sideration, the Series LFII Residential Sprinklers (TY2234) should be the first choice. The Series LFII Residential Sprinklers are intended for use in the following scenarios: • wet and dry pipe residential sprin- kler systems for one- and two-fam- ily dwellings and mobile homes per NFPA 13D • wet and dry pipe residential sprinkler systems for residential occupancies up to and including four stories in height per NFPA 13R • wet and dry pipe sprinkler systems for the residential portions of any occupancy per NFPA 13 The recessed version of the Series LFII Residential Sprinklers is intended for use in areas with finished ceilings. It employs a two-piece Style 20 Recessed Escutcheon. The Recessed Escutcheon provides 1/4 in. (6,4 mm) of recessed adjustment or up to 1/2 in. (12,7 mm) of total adjustment from the flush ceiling position. The adjustment provided by the Recessed Escutcheon reduces the accuracy to which the pipe drops to the sprinklers must be cut. The Series LFII Residential Sprinklers have been designed with heat sensi- tivity and water distribution charac- teristics proven to help in the control of residential fires and to improve the chance for occupants to escape or be evacuated. Corrosion-resistant coatings, where applicable, are utilized to extend the life of copper alloy sprinklers beyond that which would otherwise be obtained when exposed to corrosive atmo- spheres. Although corrosion-resistant coated sprinklers have passed the standard corrosion tests of the appli- cable Approval agencies, the testing is not representative of all possible cor- rosive atmospheres. Consequently, it is recommended that the end user be consulted with respect to the suit- ability of these coatings for any given corrosive environment. The effects of ambient temperature, concentration of chemicals, and gas/chemical velocity should be considered, as a minimum, along with the corrosive nature of the chemical to which the sprinklers will be exposed. Dry Pipe System Application The Series LFII Residential Pendent and Recessed Pendent Sprinklers offers a laboratory approved option for designing dry pipe residential sprin- kler systems, whereas, most residential sprinklers are laboratory approved for wet systems only. Through extensive testing, it has been determined that the number of design sprinklers (hydraulic design area) for the Series LFII Residential Pendent and Recessed Pendent Sprinklers (TY2234) need not be increased over the number of design sprinklers (hydraulic design area) as specified for wet pipe sprinkler systems, as is accustomed for density/ area sprinkler systems designed per NFPA 13. Consequently, the Series LFII Resi- dential Sprinklers offer the features of non-water filled pipe in addition to not having to increase the number of design sprinklers (hydraulic design area) for systems designed to NFPA 13, 13D, or 13R. NOTICE The Series LFII Residential Pendent and Recessed Pendent Sprinklers (TY2234) described herein must be installed and maintained in compli- ance with this document and the appli- cable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA), in addition to the standards of any authorities having jurisdiction. Failure to do so may impair the performance of these devices. The owner is responsible for main- taining their fire protection system and devices in proper operating con- dition. Contact the installing contrac- tor or product manufacturer with any questions. Sprinkler Identification Number (SIN) TY2234 TFP400 Page 2 of 6 Technical Data Approvals UL Listed (for use with wet pipe and dry pipe systems) C-UL Listed (for use only with wet pipe systems) Certified to all requirements of NSF/ANSI 61 Australian WaterMark Certified Note: Sprinklers with a polyester finish are UL Listed as corrosion-resistant sprinklers. See the Design Criteria section for details on these approvals. Maximum Working Pressure 175 psi (12,1 bar) Discharge Coefficient K=4.9 GPM/psi½ (70,6 LPM/bar ½) Temperature Rating 155°F (68°C) or 175°F (79°C) Finishes Natural Brass, Pure White Polyester Coated, Signal White Polyester Coated, or Chrome Plated Physical Characteristics Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Brass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . Copper Sealing Assembly ..Beryllium Nickel w/TEFLON Bulb (3 mm) . . . . . . . . . . . . . . . . . . . . . . . . Glass Compression Screw . . . . . . . . . . . . . . . . .Bronze Deflector . . . . . . . . . . . . . . . . . . . . . . . . . .Bronze Operation The glass bulb contains a fluid that expands when exposed to heat. When the rated temperature is reached, the fluid expands sufficiently to shatter the glass bulb, allowing the sprinkler to activate and flow water. Design Criteria The TYCO RAPID RESPONSE Series LFII Residential 4.9K Pendent and Recessed Pendent Sprinklers are UL and C-UL Listed for installation in accordance with this section. Residential Sprinkler Design Guide When conditions exist that are outside the scope of the provided criteria, refer to the Residential Sprinkler Design Guide TFP490 for the manufactur- er’s recommendations that may be acceptable to the local authority having jurisdiction. System Types Per the UL Listing, wet pipe and dry pipe systems may be utilized. Per the C-UL Listing, only wet pipe systems may be utilized. Refer to Technical Data Sheet TFP485 for the use of residential sprinklers in residential dry pipe systems. Ceiling TypesSmooth flat horizontal, or beamed, or sloped, in accordance with the 2013 Edition of NFPA 13D, 13R, or 13, as applicable. Hydraulic Design (NFPA 13D and 13R) For systems designed to NFPA 13D or NFPA 13R, the minimum re quired sprinkler flow rates are given in Tables A and B as a function of tem- perature rating and the maximum allowable coverage areas. The sprinkler flow rate is the minimum required discharge from each of the total number of design sprinklers as specified in NFPA 13D or NFPA 13R. The number of design sprinklers speci- fied in NFPA 13D and 13R for wet pipe systems is to be applied when design- ing dry pipe systems. Hydraulic Design (NFPA 13) For systems designed to NFPA 13, the number of design sprinklers is to be the four most hydraulically demanding sprinklers. The minimum required dis- charge from each of the four sprinklers is to be the greater of the following: • The flow rates given in Table A or B as a function of temperature rating and the maximum allowable coverage area. • A minimum discharge of 0.1 gpm/ft2 over the design area comprised of the four most hydraulically demanding sprinklers for actual coverage areas protected by the four sprinklers. The number of design sprinklers speci- fied in NFPA 13 for wet pipe systems is to be applied when designing dry pipe systems. Dry Pipe System Water DeliveryWhen using the Series LFII Residential Sprinklers (TY2234) in dry pipe sprin-kler systems, the time for water deliv- ery must not exceed 15 seconds for the most remote operating sprinkler. Obstruction to Water Distribution Sprinklers are to be located in accor- dance with the obstruction rules of NFPA 13D, 13R, and 13 as applicable for residential sprinklers as well as with the obstruction criteria described within the Technical Data Sheet TFP490. Operational Sensitivity Sprinklers are to be installed with a deflector-to-ceiling distance of 1-1/4 in. to 4 in. SURFACE ESCUTCHEON PLATE SEATING 1-5/8" (41,3 mm) -2 Button Temperature rating is indicated on Deflector. Deflector Compression Screw Bulb Sealing Assembly -6 * -4 5 - 3 - * * 6 4 5 1 3 2 Components: Frame1- 1/2" NPT 7/16" (11,1 mm) MAKE-IN NOMINAL ESCUTCHEON STYLE 20 RECESSEDWRENCH (57,2 mm) 2-1/4" FLATS (73,0 mm) 2-7/8" DIA. CROSS SECTION PENDENT RECESSED PENDENT FIGURE 1 RAPID RESPONSE SERIES LFII RESIDENTIAL 4.9K PENDENT AND RECESSED PENDENT SPRINKLERS (TY2234) TFP400 Page 3 of 6 Maximum Coverage Area (1) ft x ft (m x m) WET PIPE SYSTEM Minimum Flow and Residual Pressure (2)(3) Ordinary Temperature Rating 155°F (68°C)Intermediate Temperature Rating 175°F (79°C)Deflector to Ceiling Installation Type Minimum Spacing ft (m) Flow gpm (l/min) Pressure psi (bar) Flow gpm (l/min) Pressure psi (bar) 12 x 12 (3,7 x 3,7) 13 (49,2) 7.0 (0,48) 13 (49,2) 7.0 (0,48)Smooth Ceilings 1-1/4 in. to 4 in. Beamed Ceilings per NFPA 13D or 13R 1-1/4 in. to 1-3/4 in. below bottom of beam. Recessed using Style 20 Escutcheon or non-recessed per NFPA 13D, 13R, or 13 8(2,4) 14 x 14 (4,3 x 4,3) 13 (49,2) 7.0 (0,48) 13 (49,2) 7.0 (0,48) 16 x 16 (4,9 x 4,9)13 (49,2)7.0 (0,48)13 (49,2)7.0 (0,48) 18 x 18 (5,5 x 5,5) 17 (64,3) 12.0 (0,83) 17 (64,3) 12.0 (0,83) 20 x 20 (6,1 x 6,1) 20 (75,7) 16.7 (1,15) 20 (75,7) 16.7 (1,15) Notes: 1. For coverage area dimensions less than or between those indicated, use the minimum required flow for the next highest coverage area for which hydraulic design criteria are stated. 2. Requirement is based on minimum flow in gpm (lpm) from each sprinkler. The associated residual pressures are calculated using the nominal K-factor. See Hydraulic Design under the Design Criteria section. 3. For NFPA 13 residential applications, the greater of 0.1 gpm/ft2 over the design area or the flow in accordance with the criteria in this table must be used. Maximum Coverage Area (1) ft x ft (m x m) DRY PIPE SYSTEM Minimum Flow and Residual Pressure (2)(3) Ordinary Temperature Rating 155°F (68°C)Intermediate Temperature Rating 175°F (79°C)Deflector to Ceiling Installation Type Minimum Spacing ft (m) Flow gpm (l/min) Pressure psi (bar) Flow gpm (l/min) Pressure psi (bar) 12 x 12 (3,7 x 3,7) 13 (49,2) 7.0 (0,48) 13 (49,2) 7.0 (0,48)Smooth Ceilings 1-1/4 in. to 4 in. Beamed Ceilings per NFPA 13D or 13R 1-1/4 in. to 1-3/4 in. below bottom of beam. Recessed using Style 20 Escutcheon or non-recessed per NFPA 13D, 13R, or 13 8 (2,4) 14 x 14 (4,3 x 4,3)14 (53,0)8.2 (0,57)14 (53,0)8.2 (0,57) 16 x 16 (4,9 x 4,9)15 (56,8)9.4 (0,65)15 (56,8)9.4 (0,65) 18 x 18 (5,5 x 5,5) 18 (68,1) 13.5 (0,93) 18 (68,1) 13.5 (0,93) 20 x 20 (6,1 x 6,1) 21 (79,5) 18.4 (1,27) 21 (79,5) 18.4 (1,27) Notes: 1. For coverage area dimensions less than or between those indicated, use the minimum required flow for the next highest coverage area for which hydraulic design criteria are stated. 2. Requirement is based on minimum flow in gpm (lpm) from each sprinkler. The associated residual pressures are calculated using the nominal K-factor. See Hydraulic Design under the Design Criteria section. 3. For NFPA 13 residential applications, the greater of 0.1 gpm/ft2 over the design area or the flow in accordance with the criteria in this table must be used. TABLE A WET PIPE SYSTEM SERIES LFII RESIDENTIAL 4.9K PENDENT AND RECESSED PENDENT SPRINKLERS (TY2234) NFPA 13D, 13R, AND 13 HYDRAULIC DESIGN CRITERIA TABLE B DRY PIPE SYSTEM SERIES LFII RESIDENTIAL 4.9K PENDENT AND RECESSED PENDENT SPRINKLERS (TY2234) NFPA 13D, 13R, AND 13 HYDRAULIC DESIGN CRITERIA TFP400 Page 4 of 6 Sprinkler Spacing The minimum spacing between sprin- klers is 8 ft (2,4 m). The maximum spacing between sprinklers cannot exceed the length of the coverage area (Table A or B) being hydraulically calcu- lated, for example, maximum 12 ft for a 12 ft x 12 ft coverage area, or 20 ft for a 20 ft x 20 ft coverage area. Installation TYCO RAPID RESPONSE Series LFII Residential 4.9K Pendent and Recessed Pendent Sprinklers must be installed in accordance with this section. General Instructions Do not install any bulb type sprinkler if the bulb is cracked or there is a loss of liquid from the bulb. With the sprin- kler held horizontally, a small air bubble should be present. The diameter of the air bubble is approximately 1/16 in. (1,6 mm). A leak-tight 1/2 in. NPT sprinkler joint should be obtained by applying a min- imum-to-maximum torque of 7 to 14 lb-ft (9,5 to 19,0 N∙m). Higher levels of torque can distort the sprinkler Inlet with consequent leakage or impairment of the sprinkler. Do not attempt to compensate for insufficient adjustment in an Escutch- eon Plate by under- or over- tightening the sprinkler. Re-adjust the position of the sprinkler fitting to suit. Pendent Sprinklers The Series LFII Residential Pendent Sprinklers must be installed in accor- dance with the following instructions: Step 1. Install pendent sprinklers in the pendent position with the deflector par- allel to the ceiling. Step 2. With pipe thread sealant applied to the pipe threads, hand- tighten the sprinkler into the sprinkler fitting. Step 3. Tighten the sprinkler into the sprinkler fitting using only the W-Type 6 Sprinkler Wrench (Figure 3). With ref- erence to Figure 1, apply the W-Type 6 Sprinkler Wrench to the wrench flats. Recessed Pendent Sprinklers The Series LFII Residential Recessed Pendent Sprinklers must be installed in accordance with the following instructions: Step A. Install recessed pendent sprin- klers in the pendent position with the deflector parallel to the ceiling. Step B. After installing the Style 20 Mounting Plate over the sprinkler threads and with pipe thread sealant applied to the pipe threads, hand- tighten the sprinkler into the sprinkler fitting. Step C. Tighten the sprinkler into the sprinkler fitting using only the W-Type 7 Recessed Sprinkler Wrench (Figure 4). With reference to Figure 1, apply the W-Type 7 Recessed Sprinkler Wrench to the sprinkler wrench flats. Step D. After the ceiling has been installed or the finish coat has been applied, slide on the Style 20 Closure over the Series LFII Residential Sprin- kler and push the Closure over the Mounting Plate until its flange comes in contact with the ceiling. TY2234 2-7/8" DIA. (73,0 mm) (57,2 mm) 2-1/4" DIA. MOUNTING SPRINKLER CLOSURE SURFACE FITTING FACE OF (11,1±3,2 mm) 7/16±1/8" MOUNTING PLATE 1-3/8" (34,9 mm) 1-1/8" (28,6 mm) (3,2 mm) 1/8" 1/2" (12,7 mm) 1/4" (6,4 mm) RECESS WRENCH WITH SPRINKLER ENGAGEMENT IN TO ENSURE WRENCHING AREA PUSH WRENCH WRENCH RECESS (END "A" USED FOR TY2234) FIGURE 2 STYLE 20 RECESSED ESCUTCHEON FOR USE WITH THE RAPID RESPONSE SERIES LFII RESIDENTIAL PENDENT SPRINKLER FIGURE 4 W-TYPE 7 RECESSED SPRINKLER WRENCH FIGURE 3 W-TYPE 6 SPRINKLER WRENCH TFP400 Page 5 of 6 Care and Maintenance TYCO RAPID RESPONSE Series LFII Residential 4.9K Pendent and Recessed Pendent Sprinklers must be maintained and serviced in accordance with this section: Before closing a fire protection system main control valve for maintenance work on the fire protection system that it controls, permission to shut down the affected fire protection system must be obtained from the proper authorities and notify all personnel who may be affected by this action. Absence of the outer piece of an escutcheon, which is used to cover a clearance hole, can delay sprinkler operation in a fire situation. The owner must assure that the sprin- klers are not used for hanging any objects and that the sprinklers are only cleaned by means of gently dusting with a feather duster; otherwise, non- operation in the event of a fire or inad- vertent operation may result. Sprinklers which are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated, or other- wise altered after leaving the factory. Modified sprinklers must be replaced. Sprinklers that have been exposed to corrosive products of combustion, but have not operated, should be replaced if they cannot be completely cleaned by wiping the sprinkler with a cloth or by brushing it with a soft bristle brush. Care must be exercised to avoid damage to the sprinklers before, during, and after installation. Sprin- klers damaged by dropping, striking, wrench twist/slippage, or the like, must be replaced. Also, replace any sprinkler that has a cracked bulb or that has lost liquid from its bulb. See the Installation section. The owner is responsible for the inspection, testing, and maintenance of their fire protection system and devices in compliance with this document, as well as with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION, for example, NFPA 25, in addition to the standards of any authorities having jurisdiction. Contact the installing contractor or product manufacturer with any questions. Automatic sprinkler systems are rec- ommended to be inspected, tested, and maintained by a qualified Inspec- tion Service in accordance with local requirements and/or national codes. Limited Warranty For warranty terms and conditions, visit www.tyco-fire.com. Ordering Procedure Contact your local distributor for avail- ability. When placing an order, indicate the full product name and part number (P/N). Sprinkler Assemblies Specify: Series LFII 4.9K Residential Pendent Sprinkler (TY2234), (specify temperature rating), with (specify) finish, P/N (specify): 155°F (68°C) Natural Brass .................51-201-1-155 Pure White (RAL 9010) Polyester1, 2 ..................51-201-3-155 Signal White (RAL 9003) Polyester1 ....................51-201-4-155 Chrome Plated ................51-201-9-155 175°F (79°C) Natural Brass .................51-201-1-175 Pure White (RAL 9010) Polyester1, 2 ..................51-201-3-175 Signal White (RAL 9003) Polyester1 ....................51-201-4-175 Chrome Plated . . . . . . . . . . . . . . . . 51-201-9-175 1. UL Listed as corrosion-resistant. 2. Eastern Hemisphere sales only. Recessed Escutcheon Specify: Style 20 Recessed Escutch- eon with (specify*) finish, P/N (specify*) * Refer to Technical Data Sheet TFP770. Sprinkler Wrenches Specify: W-Type 6 Sprinkler Wrench, P/N 56-000-6-387 Specify: W-Type 7 Sprinkler Wrench, P/N 56-850-4-001 TFP400 Page 6 of 6 NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association; TEFLON is a registered trademark of DuPont 1400 Pennbrook Parkway, Lansdale, PA 19446 | Telephone +1-215-362-0700 © 2019 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice. RAPID RESPONSE Series LFII Residential 4.9 K-factor Concealed Pendent Sprinkler Flat Plate, Wet Pipe and Dry Pipe Systems Page 1 of 6 SEPTEMBER 2019 TFP442 IMPORTANT Refer to Technical Data Sheet TFP2300 for warnings pertaining to regulatory and health information. Always refer to Technical Data Sheet TFP700 for the “INSTALLER WARNING” that provides cautions with respect to handling and instal- lation of sprinkler systems and com- ponents. Improper handling and installation can permanently damage a sprinkler system or its compo- nents and cause the sprinkler to fail to operate in a fire situation or cause it to operate prematurely. Worldwide Contacts www.tyco-fire.com General Description The TYCO RAPID RESPONSE Series LFII Residential 4.9K Concealed Pendent Sprinklers (TY3596) are dec- orative, fusible solder sprinklers, avail- able in both ordinary 160°F (71°C) and intermediate 212°F (100 °C) tempera- ture rated configurations. They are designed for use in residential occu- pancies such as homes, apartments, dormitories, and hotels. The cover plate assembly conceals the sprinkler operating components above the ceiling. The flat profile of the cover plate provides the optimum aes- thetically appealing sprinkler design. In addition, the concealed design of the Series LFII Residential Con- cealed Pendent Sprinklers provides 1/2 in. (12,7 mm) vertical adjustment. This adjustment provides a measure of flexibility when cutting fixed sprin- kler drops. The Series LFII Residential Concealed Pendent Sprinklers are intended for use in the following scenarios: • Wet and dry pipe residential sprin- kler systems for one and two fam- ily dwellings and mobile homes per NFPA 13D • Wet and dry pipe residential sprin- kler systems for residential occupan- cies up to and including four stories in height per NFPA 13R • Wet and dry pipe sprinkler systems for the residential portions of any occupancy per NFPA 13 The Series LFII Residential Concealed Pendent Sprinklers have been designed with heat sensitivity and water distri- bution characteristics proven to help in the control of residential fires and to improve the chance for occupants to escape or be evacuated. The Series LFII Residential Con- cealed Pendent Sprinklers (TY3596) are shipped with a Disposable Protec- tive Cap. The Protective Cap is tem- porarily removed for installation, and then it can be replaced to help protect the sprinkler while the ceiling is being installed or finished. The tip of the Pro- tective Cap can also be used to mark the center of the ceiling hole into the plaster board, ceiling tiles, and so on, by gently pushing the ceiling product against the Protective Cap. When the ceiling installation is complete the Pro- tective Cap is removed and the Cover Plate Assembly is installed. Dry Pipe System Application The 160 °F (71°C) temperature rated Series LFII Residential Concealed Pendent Sprinklers offer a laboratory approved option for designing dry pipe residential sprinkler systems, whereas, most residential sprinklers are labora- tory approved for wet systems only. Through extensive testing, it has been determined that the number of design sprinklers (hydraulic design area) for the Series LFII Residential Concealed Pendent Sprinklers need not be increased over the number of design sprinklers (hydraulic design area) as specified for wet pipe sprinkler systems, as is accustomed for density/ area sprinkler systems designed per NFPA 13. Consequently, the Series LFII Residen- tial Concealed Pendent Sprinklers offer the features of non-water filled pipe in addition to not having to increase the number of design sprinklers (hydraulic design area) for systems designed to NFPA 13, 13D, or 13R. NOTICE The Series LFII Residential Concealed Pendent Sprinklers (TY3596) described herein must be installed and main- tained in compliance with this docu- ment and with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA), in addition to the standards of any authorities having jurisdiction. Failure to do so may impair the performance of these devices. The owner is responsible for main- taining their fire protection system and devices in proper operating con- dition. Contact the installing contrac- tor or product manufacturer with any questions. Sprinkler Identification Number (SIN) TY3596 TFP442 Page 2 of 6 Technical Data Approvals UL and C-UL Listed NYC Approved under MEA 44-03-E-2NSF Certified to all requirements of NSF/ANSI 61 Australian WaterMark Certified The TYCO RAPID RESPONSE Series LFII Residential Concealed Pendent Sprinklers are Listed only when installed with LFII Con- cealed Cover Plates having factory-applied finishes. Sprinklers and Cover Plates are separately ordered. See the Ordering Procedure section for more information. Maximum Working Pressure 175 psi (12,1 bar) Discharge Coefficient K=4.9 GPM/psi½ (70,6 LPM/bar½) Temperature Rating Ordinary 160°F (71°C) Sprinkler/ 139°F (59°C) Cover Plate NOTE: Maximum Ambient Ceiling Temperature for the ordinary temperature configuration is 100°F (38°C) Intermediate* 212°F (100 °C) Sprinkler/ 165°F (74 °C) Cover Plate *For wet pipe systems only NOTE: Maximum Ambient Ceiling Temperature for the intermediate temperature configuration is 150°F (65°C) Vertical Adjustment 1/2 in. (12,7 mm) Finishes See the Ordering Procedure section Physical Characteristics Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Brass Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bronze Saddle . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Brass Sealing Assembly ..Beryllium Nickel w/TEFLON Soldered Link Halves . . . . . . . . . . . . . . . . Nickel Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bronze Compression Screw . . . . . . . . . . . . . . . . . .Brass Deflector . . . . . . . . . . . . . . . . . .Copper or Brass Guide Pin Housing . . . . . . . . . . . . . . . . . .Bronze Guide Pins .........Stainless Steel or Bronze Support Cup . . . . . . . . . . . . . . . . . . . . . . . Steel Cover Plate . . . . . . . . . . . . . . . . .Copper/Brass** Retainer . . . . . . . . . . . . . . . . . . . . . . . . . Copper Cover Plate Ejection Spring ....Stainless Steel ** Brass Cover Plate is offered for Intermediate Tem- perature 165°F (74°C) only. Operation When exposed to heat from a fire, the Cover Plate, which is normally soldered to the Retainer at three points, falls away to expose the sprinkler assembly. At this point the Deflector supported by the Arms drops down to its operated position. The fusible link of the sprin- kler assembly is comprised of two link halves that are soldered together with a thin layer of solder. When the rated temperature is reached, the solder melts and the two link-halves separate allowing the sprinkler to activate and flow water. Design Criteria The TYCO RAPID RESPONSE Series LFII Residential Concealed Pendent Sprinklers (TY3596) are UL and C-UL Listed for installation in accordance with this section. Note: When conditions exist that are outside the scope of the provided cri- teria, refer to the Residential Sprinkler Design Guide TFP490 for the manu- facturer's recommendations that may be acceptable to the authority having jurisdiction. System Types Per the UL and C-UL Listing, the 160 °F (71°C) and 212°F (100 °C) LFII Residential Concealed Pendent Sprin- klers may be utilized in wet pipe systems. Only the 160°F (71°C) LFII Res- idential Concealed Pendent Sprinklers may be utilized in dry pipe systems, per the UL and C-UL Listing. Refer to Technical Data Sheet TFP485 about the use of residential sprinklers in residential dry pipe systems. Ceiling Types Smooth flat horizontal, beamed, or sloped in accordance with NFPA 13D, 13R, or 13 as applicable. Hydraulic Design (NFPA 13D and 13R) For systems designed to NFPA 13D or NFPA 13R, the minimum re quired sprin- kler flow rates are given in Tables A and B as a function of temperature rating and the maximum allowable coverage areas. The sprinkler flow rate is the minimum required discharge from each of the total number of “design sprinklers” as specified in NFPA 13D or NFPA 13R. SPRINKLER ASSEMBLY COVER PLATE ASSEMBLY COVER PLATE EJECTION SPRING RETAINER WITH THREAD DIMPLES SEALING ASSEMBLY COMPRESSION SCREW DEFLECTOR (OPERATED POSITION) SPRINKLER WRENCHING AREA SOLDER LINK ELEMENT LEVER SOLDER TAB DEFLECTOR CAP BODY (1/2" NPT) SADDLE SUPPORT CUP WITH ROLL FORMED THREADS GUIDE PIN GUIDE PIN HOUSING THREAD INTO SUPPORT CUP UNTIL MOUNTING SURFACE IS FLUSH WITH CEILING FIGURE 1 RAPID RESPONSE SERIES LFII RESIDENTIAL CONCEALED PENDENT SPRINKLER (TY3596) TFP442 Page 3 of 6 Maximum Coverage Area 1 ft x ft (m x m) Maximum Spacingft (m) DRY PIPE SYSTEM Minimum Flow and Residual Pressure 2, 3 Ordinary Temp. Rating 160°F (71°C)Deflector to Ceiling Installation Type Minimum Spacing ft (m) Flow GPM (LPM) Pressure psi (bar) 12 x 12(3,7 x 3,7)12(3,7)13 (49,2) 7.0 (0,48)Smooth Ceilings 7/8 to 1-1/8 in. Beamed Ceilings per NFPA 13D or 13R, or 13. Installed in beam 7/8 to 1-1/8 in. below bottom of beam Concealed 8(2,4) 14 x 14 (4,3 x 4,3) 14 (4,3) 14 (53,0) 8.2 (0,57) 16 x 16(4,9 x 4,9)16(4,9)15 (56,8)9.4 (0,65) 18 x 18 (5,5 x 5,5) 18 (5,5) 18 (68,1) 13.5 (0,93) 20 x 20(6,1 x 6,1)20(6,1)21 (79,5)18.4 (1,27) Notes: 1. For coverage area dimensions less than or between those indicated, use the minimum required flow for the next highest coverage area for which hydraulic design criteria are stated. 2. Requirement is based on minimum flow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated us- ing the nominal K-factor. See Hydraulic Design under the Design Criteria section. 3. For NFPA 13 residential applications, the greater of 0.1 GPM/ft2 over the design area or the flow in accordance with the criteria in this table must be used. Maximum Coverage Area 1 ft x ft (m x m) Maximum Spacingft (m) WET PIPE SYSTEM Minimum Flow and Residual Pressure 2, 3 Temp. Rating 160°F (71°C), 212°F (100 °C)Deflector to Ceiling Installation Type Minimum Spacing ft (m) Flow GPM (LPM) Pressure psi (bar) 12 x 12 (3,7 x 3,7)12 (3,7)13 (49,2) 7.0 (0,48)Smooth Ceilings 7/8 to 1-1/8 in. Beamed Ceilings per NFPA 13D or 13R, or 13. Installed in beam 7/8 to 1-1/8 in. below bottom of beam Concealed 8(2,4) 14 x 14 (4,3 x 4,3) 14 (4,3) 13 (49,2) 7.0 (0,48) 16 x 16 (4,9 x 4,9)16 (4,9)13 (49,2)7.0 (0,48) 18 x 18 (5,5 x 5,5) 18 (5,5) 17 (64,3) 12.0 (0,83) 20 x 20 (6,1 x 6,1)20 (6,1)20 (75,7)16.7 (1,15) Notes: 1. For coverage area dimensions less than or between those indicated, use the minimum required flow for the next highest coverage area for which hydraulic design criteria are stated. 2. Requirement is based on minimum flow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated using the nominal K-factor. See Hydraulic Design under the Design Criteria section. 3. For NFPA 13 residential applications, the greater of 0.1 GPM/ft2 over the design area or the flow in accordance with the criteria in this table must be used. TABLE A WET PIPE SYSTEM SERIES LFII RESIDENTIAL 4.9 K-FACTOR FLAT PLATE CONCEALED PENDENT SPRINKLER (TY3596) NFPA 13D, 13R, AND 13 HYDRAULIC DESIGN CRITERIA TABLE B DRY PIPE SYSTEM RAPID RESPONSE SERIES LFII RESIDENTIAL 4.9 K-FACTOR FLAT PLATE CONCEALED PENDENT (TY3596) NFPA 13D, 13R, AND 13 HYDRAULIC DESIGN CRITERIA TFP442 Page 4 of 6 The number of “design sprinklers” specified in NFPA 13D and 13R for wet pipe systems is to be applied when designing dry pipe systems. Hydraulic Design (NFPA 13) For systems designed to NFPA 13, the number of design sprinklers is to be the four most hydraulically demanding sprinklers. The minimum required dis- charge from each of the four sprinklers is to be the greater of the following: • The flow rates given in Tables A and B as a function of temperature rating and the maximum allowable cover- age area • A minimum discharge of 0.1 GPM/ft2 over the design area comprised of the four most hydrauli- cally demanding sprinklers for actual coverage areas protected by the four sprinklers The number of design sprinklers speci- fied in NFPA 13 for wet pipe systems is to be applied when designing dry pipe systems. Dry Pipe System Water Delivery When using the Series LFII Residen- tial Concealed Pendent Sprinklers in dry pipe sprinkler systems, the time for water delivery must not exceed 15 seconds for the most remote operat- ing sprinkler. Obstruction to Water Distribution Sprinklers are to be located in accor- dance with the obstruction rules of NFPA 13D, 13R, and 13 as applicable for residential sprinklers as well as with the obstruction criteria described within the Technical Data Sheet TFP490. Operational Sensitivity The sprinklers are to be installed rela- tive to the ceiling mounting surface as shown in Figure 2. Sprinkler Spacing The minimum spacing between sprin- klers is 8 ft (2,4 m). The maximum spacing between sprinklers cannot exceed the length of the coverage area (see Table A or B) being hydraulically calculated, for example, maximum 12 ft for a 12 ft x 12 ft coverage area, or 20 ft for a 20 ft x 20 ft coverage area. The Series LFII must not be used in applications where the air pres- sure above the ceiling is greater than that below. Down drafts through the Support Cup could delay sprinkler operation in a fire situation. Installation The TYCO RAPID RESPONSE Series LFII Residential Concealed Pendent Sprinklers (TY3596) must be installed in accordance with this section. General Instructions Damage to the fusible Link Assembly during installation can be avoided by handling the sprinkler by the support cup only. Therefore, do not apply pres- sure to the fusible Link Assembly. A 1/2 in. NPT sprinkler joint should be obtained with a minimum to maximum torque of 7 to 14 lb-ft (9,5 to 19,0 N·m). Higher levels of torque may distort the sprinkler inlet with consequent leakage or impairment of the sprinkler. Do not attempt to compensate for insufficient adjustment in the Cover Plate Assembly by under-or over- tightening the Sprinkler. Readjust the position of the sprinkler fitting to suit. Step 1. The sprinkler must only be installed in the pendent position and with the centerline of the sprinkler per- pendicular to the mounting surface. Step 2. Remove the Protective Cap. Step 3. With pipe thread sealant applied to the pipe threads, and using the W-Type 18 Wrench shown in Figure 3, install and tighten the Sprinkler/ Support Cup Assembly into the fitting. The W-Type 18 Wrench will accept a 1/2 in. ratchet drive. Step 4. Replace the Protective Cap by pushing it upwards until it bottoms out against the Support Cup. The Protec- tive Cap helps prevent damage to the Deflector and Guide Pins during ceiling installation and/or during application of the finish coating of the ceiling. It may also be used to locate the center of the clearance hole by gently pushing the ceiling material against the center point of the Cap. 1/2" NPT 3-3/16" DIA. (81,0 mm) 2-1/2" DIA. (63,5 mm) MOUNTING SURFACE FACE OF SPRINKLER FITTING DEFLECTOR IN OPERATED POSITION 1/2" (12,7 mm) THREADED ADJUSTMENT 1-7/8"±1/4" (47,6 mm ±6,4 mm) SPRINKLER- SUPPORT CUP ASSEMBLY COVER- RETAINER ASSEMBLY SPRINKLER- SUPPORT CUP ASSEMBLY OPERATED SPRINKLER COVER PLATE RETAINER DISPOSABLE PROTECTIVE CAP AIR GAP (SEE TABLE) PROFILE DEPTH (SEE TABLE) AIR GAP TEMPERATURE RATING 5/8" (15,9 mm) 1-1/8" (28,6 mm) TIP 1/8" (3,2 mm) 3/32" (2,4 mm) 3/16” (4,8 mm) 5/32” (4,0 mm) ORDINARY INTERMEDIATE PROFILE DEPTH FIGURE 2 RAPID RESPONSE SERIES LFII RESIDENTIAL CONCEALED PENDENT SPRINKLER (TY3596) INSTALLATION DIMENSIONS, PROTECTIVE CAP, AND ACTIVATED DEFLECTOR WRENCH RECESS PUSH WRENCH IN TO ENSURE ENGAGEMENT WITH SPRINKLER WRENCHING AREA FIGURE 3 W-TYPE 18 SPRINKLER WRENCH TFP442 Page 5 of 6 Note: As long as the protective Cap remains in place, the system is consid- ered to be “Out Of Service.” Step 5. After the ceiling has been com- pleted with the 2-1/2 in. (63 mm) diam- eter clearance hole and in preparation for installing the Cover Plate Assembly, remove and discard the Protective Cap, and verify that the Deflector moves up and down freely. If the sprinkler has been damaged and the Deflector does not move up and down freely, replace the entire sprinkler assembly. Do not attempt to modify or repair a damaged sprinkler. Step 6. Push on the Cover Plate Assembly until its flange comes in contact with the ceiling. Do not continue to push on the Cover Plate Assembly such that it lifts a ceiling panel out of its normal position. If the Cover Plate Assembly cannot be engaged with the Mounting Cup or the Cover Plate Assembly cannot be engaged sufficiently to contact the ceiling, the Sprinkler Fitting must be repositioned. Care and Maintenance The TYCO RAPID RESPONSE Series LFII Residential Concealed Pendent Sprinklers (TY3596) must be maintained and serviced in accordance with this section. Before closing a fire protection system main control valve for maintenance work on the fire protection system which it controls, permission to shut down the affected fire protection system must be obtained from the proper authorities and all personnel who may be affected by this action must be notified. Absence of a Cover Plate may delay the sprinkler operation in a fire situation. When properly installed, there is an air gap between the lip of the Cover Plate and the ceiling. The Ordinary Tem- perature Cover Plate assembly has a nominal 1/8 in. (3,2 mm) air gap. The Intermediate Temperature Cover Plate has a nominal 3/32 (2,4 mm) air gap, as shown in Figure 2. This air gap is necessary for proper operation of the sprinkler by allowing heat flow from a fire to pass below and above the Cover Plate to help assure appropriate release of the Cover Plate in a fire situation. If the ceiling is to be repainted after the installation of the Sprinkler, care must be exercised to ensure that the new paint does not seal off any of the air gap. Factory painted Cover Plates must not be repainted. They should be re placed, if necessary, by factory painted units. Non-factory applied paint may adversely delay or prevent sprinkler operation in the event of a fire. Do not pull the Cover Plate relative to the Enclosure. Separation may result. Sprinklers which are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated, or otherwise altered after leaving the factory. Modi- fied or over heated sprinklers must be replaced. Care must be exercised to avoid damage before, during, and after instal- lation. Sprinklers damaged by drop- ping, striking, wrench twist/slippage, or the like, must be replaced. The owner is responsible for the inspection, testing, and maintenance of their fire protection system and devices in compliance with this document, as well as with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION, for example, NFPA 25, in addition to the standards of any other authorities having jurisdiction. Contact the installing contractor or product manufacturer with any questions. The owner must assure that the sprin- klers are not used for hanging any objects and that the sprinklers are only cleaned by means of gently dusting with a feather duster; otherwise, non- operation in the event of a fire or inad- vertent operation may result. Automatic sprinkler systems should be inspected, tested, and maintained by a qualified Inspection Service in accor- dance with local requirements and/or national codes. Limited Warranty For warranty terms and conditions, visit www.tyco-fire.com. Ordering Procedure Contact your local distributor for avail- ability. When placing an order, indicate the full product name and part number (P/N). Sprinkler Assemblies Specify: Series LFII (TY3596) 4.9K Res- idential Concealed Pendent Sprinkler, P/N (specify): 160°F (71°C)...................51-112-1-160 212 °F (100 °C)..................51-112-1-212 Note: Sprinkler and Cover Plates are separately sold. See below for Cover Plate ordering information. Cover Plate Assemblies Specify: LFII Concealed Sprinkler Cover Plate Assembly, temperature rating (specify), (specify) finish, P/N (specify): 139°F (59°C) Ivory (RAL1015) . . . . . . . . . . . . . . .56-204-0-135 Bright Chrome ................56-204-1-135 Beige (RAL1001) . . . . . . . . . . . . . .56-204-2-135 Pure White (RAL9010)* . . . . . . . . .56-204-3-135 Signal White (RAL9003)** . . . . . . .56-204-4-135 Grey White (RAL9002). . . . . . . . . .56-204-5-135 Brown (RAL8028). . . . . . . . . . . . . .56-204-6-135 Black (RAL9005) . . . . . . . . . . . . . . 56-204-7-135 Brushed Brass ................56-204-8-135 Brushed Chrome . . . . . . . . . . . . . .56-204-9-135 Custom Paint .................56-204-X-135 165°F (74 °C) Ivory (RAL1015) . . . . . . . . . . . . . . .56-204-0-165 Bright Chrome ................56-204-1 165 Beige (RAL1001) . . . . . . . . . . . . . .56-204-2-165 Pure White (RAL9010)* . . . . . . . . .56-204-3-165 Signal White (RAL9003)** . . . . . . .56-204-4-165 Grey White (RAL9002). . . . . . . . . .56-204-5-165 Brown (RAL8028). . . . . . . . . . . . . .56-204-6-165 Black (RAL9005) . . . . . . . . . . . . . .56-204-7-165 Brushed Brass ................56-204-8-165 Brushed Chrome . . . . . . . . . . . . . .56-204-9-165 Custom Paint .................56-204-X-165 *Eastern Hemisphere sales only **Previously known as Bright White Note: All Custom Cover Plates are painted using SHERWIN-WILLIAMS Interior Latex Paint. Contact Johnson Controls Customer Service with any questions related to custom orders. Sprinkler Wrench Specify: W-Type 18 Sprinkler Wrench, P/N 56-000-1-265 TFP442 Page 6 of 6 NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association; TEFLON is a registered trademark of DuPont; SHERWIN-WILLIAMS is a registered trademark of SWIMC LLC 1400 Pennbrook Parkway, Lansdale, PA 19446 | Telephone +1-215-362-0700 © 2019 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice. Nicholas Domnick Fire Protection 16224 Space Drive Moreno Valley, CA 92551 Phone: (951) 807-1347 www.ndfireprotection.com La Quinta Fire Dear Sir or Madam: I would like to request an extension to the permit for the residence located at 52605 Via Dona. Permit number FSS 2021-0046 due to project delays. Nicholas J. Domnick, owner NDFP ND FP License #C-16 682276 OFFICE OF THE FIRE MARSHAL – LA QUINTA 78495 Calle Tampico, La Quinta, CA 92253 • Phone (760) 777-7074 • www.rvcfire.org March 24, 2021 Nicholas Domnick Fire Protection 16224 Space Drive Moreno Valley, CA 92551 Re: Residential Fire Sprinkler Plan Review – HASKE RESIDENCE FSS2021-0046 / 52605 VIA DONA, LA QUINTA, CA 92253 The sprinkler plans you submitted for the above referenced project have been reviewed by Riverside County Fire Department - Office of the Fire Marshal personnel and are approved with the following conditions. Permanently marked identification signs shall be attached to all control valves. The following inspections/tests are required to be witnessed by Office of the Fire Marshal Staff: (a) Overhead Rough and Hydro static test: All piping shall be visible and pumped at normal operating pressure. *No jacketed electrical and data wiring shall be in contact with, nor have the potential to contact CPVC piping once insulation is installed. (b) Final inspection The Fire Department approved plans and conditions letter must be at the job site. Applicant/installer shall be responsible to contact the Fire Department to schedule inspections. Requests for inspections are to be made at least 48 hours in advance and may be arranged by calling (760)777-7131. All questions regarding the meaning of these conditions should be referred to the Office of the Fire Marshal staff at (760)777-7074. Kohl Hetrick - Fire Safety Specialist 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 RIVERSIDE COUNTY FIRE PROTECTION PLANNING RECORD OF INSPECTIONS / PERMIT CARD THIS CARD IS TO REMAIN ON SITE AT ALL TIMES. INSTALLING CONTRACTOR MUST BE PRESENT FOR ALL INSPECTIONS. SEE NOTES ON REVERSE SIDE. JOB ADDRESS: 52605 VIA DONA PERMIT#: FSS2021-0046 DATE ISSUED: 3/23/2021 DESCRIPTION: HASKE RESIDENCE CONTRACTOR: NICK DOMNICK FIRE PROTECTION HYDRANT SYSTEM DATE INITIALS SPECIAL SUPPRESSION DATE INITIALS Thrust block pre-pour Door fan test UG rough piping Abort test UG hydro Mechanical shutdown Flush Detector test Final E F Deluge/pre-action SPRINKLER U.G. Final E F Thrust block pre-pour UST/AST TANK UG rough piping Installation UG hydro Removal Flush Emergency shut off Final E F Primary piping FIRE SPRINKLER Secondary piping Weld inspection Dispensers & shear valves Overhead rough piping Final E F Overhead hydro MISC. INSPECTIONS UG flush / OK to connect Spray booths Main drain/inspectors’ test Hood/duct extinguishing High pile storage High pile rack storage In-rack sprinklers H.P. vents/access/corridors Hose racks Tract access/hydrant verification Final E F Access & Address verification HOOD EXTINGUISHING OTHER CONST. PERMIT Detection system Function test Gas/electrical shut-off Nozzle model/placement Fire alarm connection Final E F SPRAY BOOTHS FIRE CODE PERMIT(S) Installation Air flow test Mechanical interlock Extinguishing system Fire alarm connection Final E F FIRE ALARM KNOX SYSTEM Rough-wire inspection Building Knox box Function test Gate access Knox box/padlock Duct detectors/velocity BUILDING INSPECTIONS 24 hr. battery test T/I final Sprinkler monitoring Shell final Final E F Final for occupancy FINAL INSPECTION DATE: INSPECTORS SIGNATURE: **WHEN CALLING FOR AN INSPECTION PLEASE HAVE PERMIT NUMBER READY. SEE NOTES ON REVERSE SIDE** 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 INSPECTION NOTES 1. Sway bracing and hangers will be inspected at the time of rough piping inspection. 2. All required hydrostatic pressure tests shall maintain 200 psi for a 2-hour duration. (EX: Residential Fire Sprinkler Systems) 3. Fire sprinkler system remodels: if indicated on plans or this card, a hydrostatic pressure test shall be required. 4. All underground joints and thrusts blocks shall be exposed and readily visible during the hydrostatic test. 5. Contractor shall supply all testing equipment, access and operating instructions at time of test. 6. All systems shall be inspected, tested, and approved by a Fire Inspector before any work is started that may cause the affected system to be covered or hidden. POLICIES ON FIELD INSPECTIONS A. INSPECTION REQUESTS: Inspections are made subject to availability. Please have the permit number available when scheduling inspections. For City of La Quinta inspections call: (760) 777-7131. B. APPROVED PLANS: Shall be kept on the job site at all times that work is in progress. Work shall NOT commence without approved plans. C. INSPECTION REQUESTS: As required by the California Fire Code, the appropriate installing contractor shall be required to schedule the necessary inspections and be present on site for inspections. D. RE-INSPECTIONS: Will be charged against a permit when an inspection has failed, is not ready, the responsible party not on site or where previously noted corrections have not been completed. E. COMMODITIES: Unless otherwise noted on approved plans or letter of conditions, no commodities shall be entered into the structure until clearance has been granted by the Fire Dept and Building Official. F. OCCUPANCY: Buildings shall NOT be occupied by persons other than construction workers until a Final Fire Clearance has been granted by the Fire Dept and a Certificate for Occupancy has been issued by the Building Official. INSPECTION NOTES: THIS CARD IS REQURIED TO BE POSTED AT THE CONSTRUCTION SITE. THIS CARD AND APPROVED PLANS MUST BE AVAILABLE AT THE CONSTRUCTION SITE FOR ALL INSPECTIONS. THIS PERMIT SHALL EXPIRE AND BECOME NULL AND VOID IF THE WORK AUTHORIZED IS NOT COMMENCED WITHIN 180 DAYS OR IF THE WORK IS SUSPENDED OR ABANDONED FOR A PERIOD OF 180 DAYS OR MORE. THIS PERMIT IS FOR FIRE DEPARTMENT APPROVAL ONLY AND DOES NOT INTEND TO ABROGATE MORE RESTRICTIVE REQUIREMENTS OF OTHER AGENCIES HAVING RESPONSIBILITY.