The URL can be used to link to this page

FSS2022-0069Description: DISCOVER INVESTMENTS / FIRE SPRINKLERS / BRES2021-0516 Type: FIRE SPRINKLER (WEB) Subtype: RESIDENTIAL - CUSTOM Status: FINALED Applied: 3/8/2022 EPRS HOMES Approved: 6/16/2022 KHET Parcel No: 777220011 Site Address: 53739 VIA PALACIO LA QUINTA,CA 92253 Subdivision: TR 29894-2 Block: Lot: 225 Issued: 6/21/2022 ONLINE Lot Sq Ft: 0 Building Sq Ft: 0 Zoning: Finaled: 2/1/2023 LRO Valuation: $4,100.00 Occupancy Type: Construction Type: Expired: No. Buildings: 0 No. Stories: 0 No. Unites: 0 Details: Fire Sprinkler Residential 225 � 100 i Applied to Approved Approved to Issued Issued to Finaled ADDITIONAL maillmll'. •Lllelkelcym CHRONOLOGY TYPE STAFF NAME ACTION DATE COMPLETION DATE NOTES CONTRACTOR REQUESTED FINAL INSPECTION. PERMIT EXPIRED AS OF 12/20/22 (6 MOS FROM DATE OF LAST APPROVED INSPECTION). ADDED EXTENSION FEE OF $88 AND EXTENDED PERMIT TO 1/13/23 SO CONTRACTOR CAN PAY FEE VIA ETRAKIT. EXTENSION LETTER WAS SUBMITTED. OK NOTE JOSE DELGADO 1/12/2023 1/17/2023 TO EXTEND PER KOHL. FEES HAVE BEEN PAID AND CONTRACTOR PROVIDED EXTENSION REQUEST. EXTENDING PERMIT FOR ANOTHER 6 MONTHS. CONDITIONS Printed: Wednesday, April 05, 2023 9:53:22 AM 1 of 5 WsYsrEMS CONTACTS NAME TYPE NAME ADDRESSI CITY STATE ZIP PHONE FAX EMAIL APPLICANT nicholas Domnick 16224 space drive moreno valley CA 92551 (951)807-1347 NICKNAFP@MSN.COM CONTRACTOR NICHOLAS DOMNICK FIRE 16224 SPACE DR MORENO CA 92551 (951)807-1347 NICK@NDFIREPROTECT PROTECTION VALLEY ION.COM OWNER DISCOVER INVESTMENTS LLC 3501 JAMBOREE RD. NEWPORT CA 92660 (951)807-1347 tballard@buchananstr STE 4200 BEACH eet.com FINANCIAL INFORMATION CLTD DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE RECEIPT # CHECK # METHOD PAID BY BY FIRE FAILED OR ADDITIONAL FIELD 101-0000-42421 0 $175.00 $175.00 1/31/23 WEB14210 806684736 CREDIT nicholas Domnick EPRS INSPECTIONS (EXCESSIVE) EACH FIRE PERMIT EXTENSION (ADMIN 101-0000-42420 0 $88.00 $88.00 1/17/23 WEB14082 789723183 CREDIT nicholas Domnick EPRS PROCESSING) FIRE SPRINKLER SYSTEMS - SINGLE 101-0000-42421 0 $167.00 $167.00 6/21/22 WEB12253 637780392 ECHECK nicholas Domnick EPRS 75 FAMILY DETACHED FIRE SPRINKLER SYSTEMS - SINGLE 101-0000-42420 0 $250.00 $250.00 6/21/22 WEB12253 637780392 ECHECK nicholas Domnick EPRS 75 FAMILY DETACHED PC Total Paid for FIRE FEES: $680.00 $680.00 RECORDS 101-0000-42416 0 $11.00 $11.00 6/21/22 WEB12253 637780392 ECHECK nicholas Domnick EPRS MANAGEMENT FEE 75 Total Paid for RECORDS MANAGEMENT FEE: $11.00 $11.00 TECHNOLOGY 502-0000-43611 0 $5.00 $5.00 6/21/22 WEB12253 637780392 ECHECK nicholas Domnick EPRS ENHANCEMENT FEE 75 Total Paid for TECHNOLOGY ENHANCEMENT FEE: $5.00 $5.00 TOTALS:•0 $696.00 Printed: Wednesday, April 05, 2023 9:53:22 AM 2 of 5 WsYsrEMS INSPECTIONS SEQID INSPECTION TYPE INSPECTOR SCHEDULED COMPLETED RESULT REMARKS DATE DATE OVERHEAD ROUGH LIN 6/23/2022 6/23/2022 APPROVED PIPING OVERHEAD HYRO LIN 6/23/2022 6/23/2022 APPROVED Too many paint patch ups being done throughout the home near sprinkler heads. DISAPPROVE For all rooms that have a fire place please FIRE FINAL" LRO 1/18/2023 1/18/2023 See Notes D make sure there is a Smoke/CO Detector placed in instead of only just a Smoke detector. FIRE FINAL" LRO 2/1/2023 2/1/2023 APPROVED RETURNED REVIEWS STATUS REMARKS REVIEW TYPE REVIEWER SENT DATE DUE DATE NOTES DATE 1ST FIRE - ETRAKIT KOHL 3/8/2022 3/22/2022 3/28/2022 REVISIONS REQUIRED SEE ATTACHMENTS (2 WK) HETRICK 1ST PERMIT TECH — PERMIT TECH 3/8/2022 3/9/2022 3/8/2022 COMPLETE ETRAKIT (1 DAY) BUCKET KOHL 6/7/2022 6/14/2022 6/16/2022 APPROVED SEE ATTACHMENTS 2ND FIRE (1 WK) HETRICK Printed: Wednesday, April 05, 2023 9:53:22 AM 3 of 5 WsYsrEMS ATTACHMENTS Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED DOC 3/8/2022 Etrakit Public 1ST SUBMITTAL CUT LFII CONCEALED.pdf 1 Registration SHEET riverside county plan DOC 3/8/2022 E Etrakit Public 1ST SUBMITTAL PLAN review form BALLARD 1 Registration REVIEW FORM Res.pdf DOC 3/8/2022 Etrakit Public 1ST SUBMITTAL CALC 2 BALLARD RES 2 HEAD 1 Registration HD CALC.pdf DOC 3/8/2022 Etrakit Public 1ST SUBMITTAL CALC 1 BALLARD RES1 HEAD 1 Registration HD WORST CASE CALC.pdf laquinta lot 225 DOC 3/8/2022 Etrakit Public 1ST SUBMITTAL BALLARD FIRE Model 1 Registration SPRINKLER PLAN (1).pdf DOC 6/7/2022 Etrakit Public 18 X 18 CALCS BALLARD RES 18 X 18 1 Registration CALC.pdf DOC 6/7/2022 Etrakit Public PLAN REVIEW FORM BALLARD RES PLAN 1 Registration REVIEW FORM.pdf DOC 6/7/2022 Etrakit Public WATER FLOW LETTER BALLARD RES WATER 1 Registration FLOW FROM CVWD.pdf laquinta lot 225 DOC 6/7/2022 Etrakit Public SPRINKLER PLAN BALLARD FIRE 1 Registration REVISED.pdf DOC 6/7/2022 Etrakit Public CUT SHEET TYCO LFII 4.9 SEMI 1 Registration RECESSED.pdf DOC 6/7/2022 Etrakit Public CUTSHEET TYCO NEW FLII 1 Registration CONCEALED.pdf DOC 6/15/2022 Etrakit Public 66 PSI BASED CALC 2 BALLARD 16 X 16 1 Registration HEAD CALC.pdf laquinta lot 225 DOC 6/15/2022 Etrakit Public 16 X 16 SPACING FIRE BALLARD 16 X 16 NEW 1 Registration PLAN FIRE REV.pdf Printed: Wednesday, April 05, 2023 9:53:22 AM 4 of 5 WsYsrEMS ATTACHMENTS Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED lot ballard permit lot ballard permit DOC 1/12/2023 JOSE DELGADO 0 extention letter.docx extention letter.docx FSS2022-0069-1ST FSS2022-0069-1ST DOC 3/28/2022 KOHL HETRICK REVIEW - FIRE PLAN REVIEW - FIRE PLAN 1 CORRECTIONS.pdf CORRECTIONS.pdf FSS2022-0069- FSS2022-0069- DOC 6/16/2022 KOHL HETRICK APPROVED PLANS AND APPROVED PLANS AND 1 CALCS.pdf CALCS.pdf DOC 6/16/2022 KOHL HETRICK FSS2022-0069 - COA FSS2022-0069 - COA 1 AND JOB CARD.pdf AND JOB CARD.pdf Printed: Wednesday, April 05, 2023 9:53:22 AM 5 of 5 WsYsrEMS GENERAL NOTES A. THIS DESIGN & INSTALLATION REFLECTS N.F.P.A. 130, 2016 ED. AND LA QUINTA CITY FIRE DEPARTMENT AMENDMENTS. 1. THIS DRAWING SHOWS THE LAY -OUT OF THE SYSTEM AND INDICATES THE APPROXIMATE LOCATION OF EQUIPMENT mRAxuasrsrtu mia AND PIPING. THE PIPING IS TO BE INSTALLED IN APPROXIMATELY THE AREA AS INDICATED ON THE xyamolmly oe:�oee putoma is SprmHa SyNatem DRAWINGS. HOWEVER, THE CONTRACTOR SHALL BE _ RESPONSABLE FOR ANY MODIFICATIONS AS MAY BE _XL. REQUIRED TO SUIT STRUCTURAL OR JOB CONDITIONS. CONTRACTOR SHALL FURNISH ALL OFFSETS, ADDITIONAL x0 a SPRwNLERS O FITTINGS, PIPE ADJUSMENTS ETC., AS MAY BE REQUIRED TO MEET INSTALLATION CONDITIONS. 5 of oEs 2. ONLY UL APPROVED AND NFPA LISTED EQUIPMENT ww 0 - SHALL BE USED. 'xzwo - 3. THE CONTRACTOR IS TO REVIEW AND VERIFY ALL FIELD 2xxsry CONDITIONS, MEASUREMENTS, PLANS AND STOCK LISTS, oEvoan rrt"aouxurcz 0 4. PENETRATIONS THROUGH FIRE RATED PARTITIONS TO BE SEALED TO MAINTAIN THE INTEGRITY OF THE PARTITION. 1EM OEUAxO 5. CONTRACTOR IS TO PERFORM AND MEET ALL CODE O REQUIRED TESTS, AND FILE A MATERIAL AND TEST CERTIFICATE PER NFPA $13D. , 0 6. HYDRAULIC PLACARD TO BE PROVIDED AT THE BASE OF THE RISER ON CALCULATED SYSTEMS. 7. ALL HEADS SUBJECT TO MECHANICAL DAMAGE TO BE PROVIDED WITH HEAD GUARDS. 8, CONTRACTOR IS TO REPORT CONDITIONS REQUIRING CHANGES FROM PLANS TO THE ENGINEER PRIOR TO STARTING WORK. 9. SPRINKLER HEAD TEMPERATURE RATINGS TO BE IN N ACCORDANCE WITH NFPA 13D OR OTHER GOVERNING MORNIN R( CODE. 10. HANGERS ARE TO BE IN ACCORDANCE WITH NFPA 13D. EARTHQUAKE BRACING TO BE PROVIDED WHERE REQUIRED. - 11. FLUSHING CONNECTIONS TO BE PROVIDED AT THE ENDS OF CROSSMAINS. 12. AUXILIARY DRAINS TO BE PROVIDED WHERE REQUIRED TO DRAIN ALL PORTIONS OF THE SYSTEM. 13. RELIEF VALVES ARE TO BE PROVIDED ON GRIDDED SYSTEMS. 1T ALL WORK SHALL BE APPROVED BY AUTHORITIES HAVING JURISDICTION. — 15. SPARE HEAD CABINET WITH REQUIRED # OF HEADS, AND WRENCH, TO BE PROVIDED. NOTES TO THE OWNER 8 THE SPRINKLER SYSTEM MUST BE MAINTAINED AND TESTED WATER FLOW INFORMATION REGULARLY BY YOU OR YOUR AGENTS IN ACCORDANCE WITH NFPA REQUIREMENTS. STATIC PRESSURE 66 P.s.l. RES. PRESSURE 20 P.s.l. YOU MUST MAINTAIN SUFFICIENT HEAT THROUGHOUT THE FLOW 500 G.P.M. PREMISES TO PREVENT SYSTEM FREEZING. FROM CVWD DAAQ YOU SHALL INFORM TENANTS OF PROPER CARE NECESSARY TO MAINTAIN THE SYSTEM. IF THE CONSTRUCTION OR OCCUPANCY IS ALTERED IN ANY WAY, COVERED PATIO THE SYSTEM WILL HAVE TO BE UPDATED ACCORDINGLY. THE FIRE SPRINKLER INSTALLER SHAL PROVIDE TO THE OWNER/ OCCUPANT INSTRUCTIONS ON INSPECTING, TESTING AND MAINTAINING THE SYSTEM. (NFPA 13-D, SECTION 4.1.1) NOTE TO PLAN CHECKER INSTALL NEW FIRE SPRINKLERS SYSTEM ALL PIPE 1" CPVC 1O' FLAT CEILINGS U.N.O. HANGERS PER 2016 NFPA 13D APN # 777-220-011 i a� ' M o®E�'JD9t8�91i1 Ilwll r 8 oR.,em.axol GUEST JR SUITE 2 11 Aicl g La Qu APoPROVDD M om�o+�n a AIK BY: KohlE.Al d IOcLc 'EL O 0 E1 Ill-'H o022n�0069 . RMIT FFSS29 PRIMARY SUITE GUEST SUITE2 12-, a� PRI NIARY -1 - - BATH 0. 1 r' n1° F� _- 1' V I Fz) 1° (rERln1 8-2 1-4 4-7 oALc 9-4 2-5 4-5 9-11 c IS-6 O elevation change - L. O O _y I L K2O - IAUN T'c - - C, O f )M t6-9 EDIA GYM/ - - BONUS ROOV, 1_1 _ 1. O, 12-fi 1• I• 1—•a 12-0 1. 5-0 O 6 CEILING FAN REMOVED O 2' elevation change - GARAGE2- _ � O O T.R R B60 ILI - ENTR 2' el .tlox ehox e COURTYARD p� m GREAT ROOM ILI .11 8 me® sJ gmmw IIIII o Ann, ml m PROJECT: OWNER : BALLARD RESIDENCE S.HEAD TYPE ORF. K-vac, 1EMP FlN. cT. 53739 VIA PALACIO DESERT LAND HOLDINGS LLC FCnco Lv 11 cone OexlasPAarvc) 1/2 as 155 'MIT as O irCO LFlI (_NIUA ROAM/ GARAGE) 1/2 49 D5 'Mli 10 LOT 225 HIDEAWAY COUNTRY CLUB 42-335 WASHINGTON ST. STE.F340 TYCO LP II 51Gew 11 1/2ez I66 WHT 0 LA QUINTA, CA PALM DESERT, CA 92211 NTAL 54 PER PLANCHECK COMMENTS El o O FIRE SPRINKLER PLAN m O %'fr' �NICKJ DOMNICK �n AAl9aRSTE0.V� �� Zoto QO�i a m� Sao a sQ wo5; Jm m O dmM Oo DESIGN AND INSTALLATION BY: N.D.F.P CA LICENSE: #682276 RICH OLAS DOMNICK FIRE PROTECTION 16224 SPACE DRIVE MORENO VALLEY, CA (951) 807-1347 DRAWN BY NICK ;ALE: 1 4 = ir DATE:03-01-22 PAGE: O7 OF 01 0 HYDRAULIC CALCULATIONS FOR BALLARD RESIDENCE 16 X 16 CALC 53739 VIA PALACIO LA QUINTA, CA FILE NUMBER: 5642 DATE: JUN 15, 2022 -DESIGN DATA - OCCUPANCY CLASSIFICATION: RESIDENTIAL DENSITY: .05 gpm/sq. ft. AREA OF APPLICATION: 500 sq. ft. COVERAGE PER SPRINKLER: 256 sq. ft. NUMBER OF SPRINKLERS CALCULATED: 2 sprinklers TOTAL SPRINKLER WATER FLOW REQUIRED: 26.0 gpm TOTAL WATER REQUIRED (including hose): 31.0 gpm FLOW AND PRESSURE (@ BOR): 26 gpm @ 31.6 psi SPRINKLER ORIFICE SIZE: 7/16 inch NAME OF CONTRACTOR: NICHOLAS DOMNICK FIRE PROTECTION DESIGN/LAYOUT BY: NICK AUTHORITY HAVING JURISDICTION: LA QUINTA FIRE RIVERSIDE COUNTY CONTRACTOR CERTIFICATION NUMBER: C-16 # 682276 SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 2 DATE: 6/15/2022ENBURGER\BALLARD LOT 225\SUBMIT 2\BALLARD 16 X 16 CALC.SDF JOB TITLE: BALLARD 16X16 CALC WATER SUPPLY ANALYSIS Static: 66.00 psi Resid: 20.00 psi Flow: 500.0 gpm :I I 70.0 1 60.0 G A U 50.0 G 2 E 40.0 P 30.0 R E 20.0 S S U 10.0 R E 0.0 LEGEND 1 Available pressure 65.73 psi @ 31.0 gpm 2 i Required pressure 43.56 psi @ 31.0 gpm A. Source Supply Curve B. System Demand Curve P -14.7 1 1 1 1 1 1 1 1 1 s 100150 200 250 300 350 400 450 500 i FLOW (GPM) )_tote: (1) Dashed Lines indicate extrapolated values from Test Results SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 3 DATE: 6/15/2022ENBURGER\BALLARD LOT 225\SUBMIT 2\BALLARD 16 X 16 CALC.SDF JOB TITLE: BALLARD 16X16 CALC NFPA WATER SUPPLY DATA SOURCE STATIC RESID. FLOW AVAIL. TOTAL REQ'D NODE PRESS. PRESS. @ PRESS. @ DEMAND PRESS. TAG (PSI) (PSI) (GPM) (PSI) (GPM) (PSI) SOURCE 66.0 20.0 500.0 65.7 31.0 43.6 AGGREGATE FLOW ANALYSIS: TOTAL FLOW AT SOURCE 31.0 GPM TOTAL HOSE STREAM ALLOWANCE AT SOURCE 0.0 GPM OTHER HOSE STREAM ALLOWANCES 5.0 GPM TOTAL DISCHARGE FROM ACTIVE SPRINKLERS 26.0 GPM NODE ANALYSIS DATA NODE TAG ELEVATION NODE TYPE PRESSURE DISCHARGE NOTES (FT) (PSI) (GPM) M1 101.0 - - - - 38.7 - - - NOTES M2 101.0 - - - - 32.7 - - - NOTES UGA 101.0 - - - - 32.3 - - - NOTES DOM 102.0 HOSE STREAM 31.7 5.0 NOTES BOR 102.0 - - - - 31.6 - - - TOR 112.0 - - - - 24.5 - - - 5 112.0 - - - - 22.3 - - - 5A 112.0 - - - - 19.7 - - - 5B 112.0 - - - - 18.8 - - - 5C 112.0 - - - - 18.0 - - - 5D 112.0 - - - - 17.3 - - - 6 112.0 - - - - 18.7 - - - 7 112.0 - - - - 17.8 - - - 8 112.0 - - - - 17.1 - - - 9 112.0 - - - - 17.1 - - - 10 112.0 - - - - 17.0 - - - 10A 114.0 - - - - 15.9 - - - 11 114.0 - - - - 15.6 - - - 12 112.0 - - - - 16.4 - - - 13 112.0 - - - - 16.3 - - - 14 112.0 - - - - 15.1 - - - 15 112.0 - - - - 15.4 - - - 15A 116.0 - - - - 13.9 - - - 16 116.0 - - - - 14.2 - - - 17 116.0 - - - - 14.4 - - - 17A 116.0 - - - - 14.4 - - - 17B 114.0 - - - - 15.3 - - - 18 114.0 - - - - 15.5 - - - 19 114.0 - - - - 15.7 - - - 20 112.0 - - - - 16.8 - - - 21 112.0 - - - - 11.3 - - - 21A 114.0 - - - - 7.4 - - - 100 114.0 K= 4.90 7.0 13.0 101 114.0 K= 4.90 7.0 13.0 SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 4 DATE: 6/15/2022ENBURGER\BALLARD LOT 225\SUBMIT 2\BALLARD 16 X 16 CALC.SDF JOB TITLE: BALLARD 16X16 CALC NODE ANALYSIS DATA NODE TAG ELEVATION NODE TYPE PRESSURE DISCHARGE NOTES (FT) (PSI) (GPM) SOURCE 100.0 SOURCE 43.6 31.0 SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 5 DATE: 6/15/2022ENBURGER\BALLARD LOT 225\SUBMIT 2\BALLARD 16 X 16 CALC.SDF JOB TITLE: BALLARD 16X16 CALC 141a19=0*am 071 W1 Pipe Tag K-fac Add F1 Add F1 To Fit: L C (Pt) Frm Node E1 (ft) PT (q) Node/ Nom ID Eq.Ln. F (Pe) To Node E1 (ft) PT Tot.(Q) Disch Act ID (ft.) T Pf/ft. (Pf) Pipe: 1 Source 0.0 15.00 150 4.9 SOURCE 100.0 43.6 31.0 M2 1.000 2E: 5.4 5.40 0.4 M1 101.0 38.7 31.0 1.025 20.40 0.217 4.4 Pipe: 2 0.0 Fixed Pressure Loss Device M1 101.0 38.7 31.0 UGA 6.0 psi, 31.0 gpm M2 101.0 32.7 31.0 Pipe: 3 0.0 0.0 45.00 150 0.4 M2 101.0 32.7 31.0 DOM 2.000 2E:15.1 15.11 -0.0 UGA 101.0 32.3 31.0 2.067 60.11 0.007 0.4 Pipe: 4 H.S. 5.0 Disch 5.00 150 0.6 UGA 101.0 32.3 26.0 BOR 2.000 E: 7.6 22.67 0.4 DOM 102.0 31.7 31.0 2.067 T:15.1 27.67 0.007 0.2 Pipe: 5 0.0 0.0 2.00 150 0.1 DOM 102.0 31.7 26.0 TOR 2.000 T:15.1 15.11 -0.0 BOR 102.0 31.6 26.0 2.067 17.11 0.005 0.1 Pipe: 6 0.0 0.0 10.00 150 7.1 BOR 102.0 31.6 26.0 5 1.000 E: 7.0 15.00 4.3 TOR 112.0 24.5 26.0 1.101 C: 8.0 25.00 0.111 2.8 Pipe: 7 0.0 0.0 6.00 150 2.2 TOR 112.0 24.5 26.0 5A 1.000 2E:14.0 14.00 -0.0 5 112.0 22.3 26.0 1.101 20.00 0.111 2.2 Pipe: 8 0.0 13.8 6 17.00 150 2.5 5 112.0 22.3 12.2 5B 1.000 T: 6.0 6.00 -0.0 5A 112.0 19.7 26.0 1.101 23.00 0.111 2.5 Pipe: 9 0.0 0.0 19.00 150 0.9 5A 112.0 19.7 12.2 5C 1.000 2E:14.0 14.00 -0.0 5B 112.0 18.8 12.2 1.101 33.00 0.027 0.9 Pipe: 10 0.0 0.0 23.00 150 0.8 5B 112.0 18.8 12.2 5D 1.000 E: 7.0 7.00 -0.0 5C 112.0 18.0 12.2 1.101 30.00 0.027 0.8 Pipe: 11 0.0 0.0 14.00 150 0.7 5C 112.0 18.0 12.2 13 1.000 E: 7.0 13.00 -0.0 5D 112.0 17.3 12.2 1.101 T: 6.0 27.00 0.027 0.7 Pipe: 12 0.0 17.8 14 30.00 150 1.0 5D 112.0 17.3 -5.6 12 1.000 T: 6.0 6.00 -0.0 13 112.0 16.3 12.2 1.101 36.00 0.027 1.0 Notes SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 6 DATE: 6/15/2022ENBURGER\BALLARD LOT 225\SUBMIT 2\BALLARD 16 X 16 CALC.SDF JOB TITLE: BALLARD 16X16 CALC Pipe Tag K-fac Add F1 Add F1 To Fit: L C (Pt) Frm Node E1 (ft) PT (q) Node/ Nom ID Eq.Ln. F (Pe) To Node E1 (ft) PT Tot.(Q) Disch Act ID (ft.) T Pf/ft. (Pf) Pipe: 13 0.0 26.0 21 16.00 150 1.2 13 112.0 16.3 -8.2 15 1.000 T: 6.0 6.00 -0.0 14 112.0 15.1 17.8 1.101 22.00 0.055 1.2 Pipe: 14 0.0 0.0 27.00 150 3.8 14 112.0 15.1 26.0 21A 1.000 E: 7.0 7.00 -0.0 21 112.0 11.3 26.0 1.101 34.00 0.111 3.8 Pipe: 15 0.0 13.0 101 15.00 150 4.0 21 112.0 11.3 13.0 100 1.000 E: 7.0 13.00 0.9 21A 114.0 7.4 26.0 1.101 T: 6.0 28.00 0.111 3.1 Pipe: 16 4.90 13.0 Disch 4.00 150 0.3 21A 114.0 7.4 0.0 1.000 E: 7.0 7.00 -0.0 100 114.0 7.0 13.0 1.101 11.00 0.031 0.3 Pipe: 17 4.90 13.0 Disch 4.00 150 0.3 21A 114.0 7.4 0.0 1.000 E: 7.0 7.00 -0.0 101 114.0 7.0 13.0 1.101 11.00 0.031 0.3 Pipe: 18 0.0 17.8 14 8.00 150 0.1 12 112.0 16.4 -12.2 5D 1.000 E: 7.0 7.00 -0.0 13 112.0 16.3 5.6 1.101 15.00 0.006 0.1 Pipe: 19 0.0 0.0 2.00 150 -0.8 11 114.0 15.6 5.6 13 1.000 E: 7.0 7.00 -0.9 12 112.0 16.4 5.6 1.101 9.00 0.006 0.1 Pipe: 20 0.0 0.0 27.00 150 0.3 10A 114.0 15.9 5.6 12 1.000 2E:14.0 14.00 -0.0 11 114.0 15.6 5.6 1.101 41.00 0.006 0.3 Pipe: 21 0.0 0.0 29.00 150 1.1 10 112.0 17.0 5.6 11 1.000 E: 7.0 13.00 0.9 10A 114.0 15.9 5.6 1.101 T: 6.0 42.00 0.006 0.3 Pipe: 22 0.0 0.0 4.00 150 0.1 9 112.0 17.1 5.6 10A 1.000 T: 6.0 6.00 -0.0 10 112.0 17.0 5.6 1.101 10.00 0.006 0.1 Pipe: 23 0.0 0.0 8.00 150 0.1 8 112.0 17.1 5.6 10 1.000 T: 6.0 6.00 -0.0 9 112.0 17.1 5.6 1.101 14.00 0.006 0.1 Pipe: 24 0.0 8.2 20 14.00 150 0.7 7 112.0 17.8 5.6 9 1.000 T: 6.0 6.00 -0.0 8 112.0 17.1 13.8 1.101 20.00 0.034 0.7 Pipe: 25 0.0 0.0 19.00 150 0.9 6 112.0 18.7 13.8 8 1.000 T: 6.0 6.00 -0.0 7 112.0 17.8 13.8 1.101 25.00 0.034 0.9 Notes SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 7 DATE: 6/15/2022ENBURGER\BALLARD LOT 225\SUBMIT 2\BALLARD 16 X 16 CALC.SDF JOB TITLE: BALLARD 16X16 CALC Pipe Tag K-fac Add F1 Add F1 To Fit: L C (Pt) Frm Node E1 (ft) PT (q) Node/ Nom ID Eq.Ln. F (Pe) To Node E1 (ft) PT Tot.(Q) Disch Act ID (ft.) T Pf/ft. (Pf) Pipe: 26 0.0 0.0 24.00 150 1.0 5A 112.0 19.7 13.8 7 1.000 T: 6.0 6.00 -0.0 6 112.0 18.7 13.8 1.101 30.00 0.034 1.0 Pipe: 27 0.0 26.0 21 9.00 150 0.3 15 112.0 15.4 -17.8 13 1.000 2E:14.0 14.00 -0.0 14 112.0 15.1 8.2 1.101 23.00 0.013 0.3 Pipe: 28 0.0 0.0 4.00 150 -1.5 15A 116.0 13.9 8.2 14 1.000 2E:14.0 14.00 -1.7 15 112.0 15.4 8.2 1.101 18.00 0.013 0.2 Pipe: 29 0.0 0.0 14.00 150 0.3 16 116.0 14.2 8.2 15 1.000 T: 6.0 6.00 -0.0 15A 116.0 13.9 8.2 1.101 20.00 0.013 0.3 Pipe: 30 0.0 0.0 12.00 150 0.2 17 116.0 14.4 8.2 15A 1.000 T: 6.0 6.00 -0.0 16 116.0 14.2 8.2 1.101 18.00 0.013 0.2 Pipe: 30A 0.0 0.0 17.00 150 0.0 17A 116.0 14.4 0.0 1.000 E: 7.0 7.00 -0.0 17 116.0 14.4 0.0 1.101 24.00 0.000 0.0 Pipe: 31 0.0 0.0 2.00 150 0.9 17B 114.0 15.3 0.0 1.000 E: 7.0 7.00 0.9 17A 116.0 14.4 0.0 1.101 9.00 0.000 0.0 Pipe: 32 0.0 0.0 15.00 150 1.1 18 114.0 15.5 8.2 16 1.000 T: 6.0 6.00 0.9 17 116.0 14.4 8.2 1.101 21.00 0.013 0.3 Pipe: 33 0.0 0.0 3.00 150 0.1 19 114.0 15.7 8.2 17 1.000 T: 6.0 6.00 -0.0 18 114.0 15.5 8.2 1.101 9.00 0.013 0.1 Pipe: 34 0.0 0.0 13.00 150 1.1 20 112.0 16.8 8.2 18 1.000 T: 6.0 6.00 0.9 19 114.0 15.7 8.2 1.101 19.00 0.013 0.2 Pipe: 35 0.0 0.0 23.00 150 0.4 8 112.0 17.1 8.2 19 1.000 T: 6.0 6.00 -0.0 20 112.0 16.8 8.2 1.101 29.00 0.013 0.4 Notes SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 8 DATE: 6/15/2022ENBURGER\BALLARD LOT 225\SUBMIT 2\BALLARD 16 X 16 CALC.SDF JOB TITLE: BALLARD 16X16 CALC NOTES (HASS): (1) Calculations were performed by the HASS 2021 D computer program in accordance with NFPA13 (2020) under license no. 64621467 granted by HRS Systems, Inc. 208 Southside Square Petersburg, TN 37144 (931) 659-9760 (2) The system has been calculated to provide an average imbalance at each node of 0.002 gpm and a maximum imbalance at any node of 0.084 gpm. (3) Total pressure at each node is used in balancing the system. Maximum water velocity is 12.0 ft/sec at pipe 1. (4) Items listed in bold print on the cover sheet are automatically transferred from the calculation report. (5) Available pressure at source node SOURCE under full flow conditions is 65.58 psi with a flow of 39.65 gpm. (6) PIPE FITTINGS TABLE HASS Pipe Table Name: standard PAGE: F MATERIAL: CPVC HWC: 150 Diameter Equivalent Fitting Lengths in Feet (in) F E T R K C G F45 Ell Tee RunT Kplg ChkVly Gate 1.101 1.40 7.00 6.00 1.70 1.00 8.00 0.40 PAGE: * MATERIAL: S40 HWC: 120 Diameter Equivalent Fitting Lengths in Feet (in) E T L C B G A D N Ell -------------------------------------------------------- Tee LngEll ChkVly BfyVly GatVly A1mChk DPVly NPTee F F45Ell 1.025 1.79 4.47 1.79 4.47 5.36 0.89 8.93 1.79 4.47 0.89 2.067 5.00 10.00 3.00 11.00 6.00 1.00 10.00 10.00 10.00 2.50 0 HYDRAULIC CALCULATIONS FOR BALLARD RESIDENCE 53739 VIA PALACIO LA QUINTA CA LOT 225 <FILE NUMBER: 5673 -DESIGN DATA - OCCUPANCY CLASSIFICATION: RESIDENTIAL DENSITY: .05 gpm/sq. ft. AREA OF APPLICATION: 500 sq. ft. COVERAGE PER SPRINKLER: 324 sq. ft. NUMBER OF SPRINKLERS CALCULATED: 2 sprinklers TOTAL SPRINKLER WATER FLOW REQUIRED: 34.6 gpm TOTAL WATER REQUIRED (including hose): 39.6 gpm FLOW AND PRESSURE (@ BOR): 39.6 gpm @ 65.2 psi SPRINKLER ORIFICE SIZE: 7/16 inch NAME OF CONTRACTOR: NICHOLAS DOMNICK FIRE PROTECTION DESIGN/LAYOUT BY: NICK AUTHORITY HAVING JURISDICTION: LA QUINTA RIVERSIDE COUNTY FIRE CONTRACTOR CERTIFICATION NUMBER: C-16 # 682276 CALCULATIONS BY HASS COMPUTER PROGRAM (LICENSE # 64621467 ) HRS SYSTEMS, INC. SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 2 DATE: 6/7/2022 C:\USERS\NICKN\BALLARD RES JUNE CALC.SDF JOB TITLE: BALLARD RS CORRECTED WATER SUPPLY ANALYSIS Static: 110.00 psi Resid: 20.00 psi Flow: 500.0 gpm 120.0 1 100.0 G A 80.2 U G E 60.0 P R E 40.0 S S U 20.0 R E LEGEND 1 Available pressure 109.17 psi @ 39.6 gpm 2 i Required pressure 80.22 psi @ 39.6 gpm A. Source Supply Curve B. System Demand Curve P -14.7 1 1 1 1 1 1 1 1 1 s 100150 200 250 300 350 400 450 500 i FLOW (GPM) )_tote: (1) Dashed Lines indicate extrapolated values from Test Results SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 3 DATE: 6/7/2022 C:\USERS\NICKN\BALLARD RES JUNE CALC.SDF JOB TITLE: BALLARD RS CORRECTED NFPA WATER SUPPLY DATA SOURCE STATIC RESID. FLOW AVAIL. TOTAL REQ'D NODE PRESS. PRESS. @ PRESS. @ DEMAND PRESS. TAG (PSI) (PSI) (GPM) (PSI) (GPM) (PSI) SOURCE 110.0 20.0 500.0 109.2 39.6 80.2 AGGREGATE FLOW ANALYSIS: TOTAL FLOW AT SOURCE 39.6 GPM TOTAL HOSE STREAM ALLOWANCE AT SOURCE 0.0 GPM OTHER HOSE STREAM ALLOWANCES 5.0 GPM TOTAL DISCHARGE FROM ACTIVE SPRINKLERS 34.6 GPM NODE ANALYSIS DATA NODE TAG ELEVATION NODE TYPE PRESSURE DISCHARGE NOTES (FT) (PSI) (GPM) M1 101.0 - - - - 72.8 - - - NOTES M2 101.0 - - - - 66.8 - - - NOTES UGA 101.0 - - - - 66.2 - - - NOTES DOM 102.0 - - - - 65.5 - - - NOTES BOR 102.0 - - - - 65.2 - - - NOTES TOR 112.0 - - - - 54.9 - - - NOTES 5 112.0 HOSE STREAM 50.1 5.0 NOTES 6 112.0 - - - - 41.4 - - - NOTES 7 112.0 - - - - 36.6 - - - NOTES 8 112.0 - - - - 32.6 - - - NOTES 9 112.0 - - - - 31.8 - - - NOTES 10 112.0 - - - - 31.3 - - - 10A 114.0 - - - - 28.5 - - - 11 112.0 - - - - 27.1 - - - 12 112.0 - - - - 26.2 - - - 13 112.0 - - - - 25.4 - - - 14 112.0 - - - - 24.3 - - - 15 112.0 - - - - 25.7 - - - 15A 116.0 - - - - 24.5 - - - 16 116.0 - - - - 25.4 - - - 17 116.0 - - - - 26.3 - - - 18 114.0 - - - - 29.0 - - - 19 114.0 - - - - 29.4 - - - 20 112.0 - - - - 31.2 - - - 21 112.0 - - - - 17.7 - - - 100 114.0 K= 4.90 12.9 17.6 101 114.0 K= 4.90 12.0 17.0 SOURCE 100.0 SOURCE 80.2 39.6 SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 4 DATE: 6/7/2022 C:\USERS\NICKN\BALLARD RES JUNE CALC.SDF JOB TITLE: BALLARD RS CORRECTED Ila Q19=0Il:am07l9y1 Pipe Tag K-fac Add F1 Add F1 To Fit: L C (Pt) Frm Node E1 (ft) PT (q) Node/ Nom ID Eq.Ln. F (Pe) Notes To Node E1 (ft) PT Tot.(Q) Disch Act ID (ft.) T Pf/ft. (Pf) Pipe: 1 Source 0.0 15.00 150 7.4 SOURCE 100.0 80.2 39.6 M2 1.000 2E: 5.4 5.40 0.4 M1 101.0 72.8 39.6 1.025 20.40 0.341 7.0 Pipe: 2 0.0 Fixed Pressure Loss Device M1 101.0 72.8 39.6 UGA 6.0 psi, 39.6 gpm M2 101.0 66.8 39.6 Pipe: 3 0.0 0.0 45.00 150 0.7 M2 101.0 66.8 39.6 DOM 2.000 2E:15.1 15.11 -0.0 UGA 101.0 66.2 39.6 2.067 60.11 0.011 0.7 Pipe: 4 0.0 0.0 5.00 150 0.7 UGA 101.0 66.2 39.6 BOR 2.000 2E:15.1 15.11 0.4 DOM 102.0 65.5 39.6 2.067 20.11 0.011 0.2 Pipe: 5 0.0 0.0 2.00 150 0.3 DOM 102.0 65.5 39.6 TOR 2.000 E: 7.6 22.67 -0.0 BOR 102.0 65.2 39.6 2.067 T:15.1 24.67 0.011 0.3 Pipe: 6 0.0 0.0 10.00 150 10.4 BOR 102.0 65.2 39.6 5 1.000 E: 7.0 15.00 4.3 TOR 112.0 54.9 39.6 1.101 C: 8.0 25.00 0.241 6.0 Pipe: 7 H.S. 5.0 Disch 6.00 150 4.8 TOR 112.0 54.9 34.6 6 1.000 2E:14.0 14.00 -0.0 5 112.0 50.1 39.6 1.101 20.00 0.241 4.8 Pipe: 8 0.0 0.0 40.00 150 8.6 5 112.0 50.1 34.6 7 1.000 T: 6.0 6.00 -0.0 6 112.0 41.4 34.6 1.101 46.00 0.187 8.6 Pipe: 9 0.0 0.0 20.00 150 4.9 6 112.0 41.4 34.6 8 1.000 T: 6.0 6.00 -0.0 7 112.0 36.6 34.6 1.101 26.00 0.187 4.9 Pipe: 10 0.0 16.6 20 15.00 150 3.9 7 112.0 36.6 18.0 9 1.000 T: 6.0 6.00 -0.0 8 112.0 32.6 34.6 1.101 21.00 0.187 3.9 Pipe: 11 0.0 0.0 8.00 150 0.8 8 112.0 32.6 18.0 10 1.000 T: 6.0 6.00 -0.0 9 112.0 31.8 18.0 1.101 14.00 0.056 0.8 Pipe: 12 0.0 0.0 4.00 150 0.6 9 112.0 31.8 18.0 10A 1.000 T: 6.0 6.00 -0.0 10 112.0 31.3 18.0 1.101 10.00 0.056 0.6 SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 5 DATE: 6/7/2022 C:\USERS\NICKN\BALLARD RES JUNE CALC.SDF JOB TITLE: BALLARD RS CORRECTED Pipe Tag K-fac Add F1 Add F1 To Fit: L C (Pt) Frm Node E1 (ft) PT (q) Node/ Nom ID Eq.Ln. F (Pe) To Node E1 (ft) PT Tot.(Q) Disch Act ID (ft.) T Pf/ft. (Pf) Pipe: 13 0.0 0.0 27.00 150 2.8 10 112.0 31.3 18.0 11 1.000 E: 7.0 7.00 0.9 10A 114.0 28.5 18.0 1.101 34.00 0.056 1.9 Pipe: 14 0.0 0.0 27.00 150 1.4 10A 114.0 28.5 18.0 12 1.000 2E:14.0 14.00 -0.9 11 112.0 27.1 18.0 1.101 41.00 0.056 2.3 Pipe: 15 0.0 0.0 2.00 150 0.9 11 112.0 27.1 18.0 13 1.000 2E:14.0 14.00 -0.0 12 112.0 26.2 18.0 1.101 16.00 0.056 0.9 Pipe: 16 0.0 0.0 7.00 150 0.7 12 112.0 26.2 18.0 14 1.000 T: 6.0 6.00 -0.0 13 112.0 25.4 18.0 1.101 13.00 0.056 0.7 Pipe: 17 0.0 34.6 21 15.00 150 1.2 13 112.0 25.4 -16.6 15 1.000 T: 6.0 6.00 -0.0 14 112.0 24.3 18.0 1.101 21.00 0.056 1.2 Pipe: 18 0.0 34.6 21 9.00 150 1.4 15 112.0 25.7 -18.0 13 1.000 3E:21.0 21.00 -0.0 14 112.0 24.3 16.6 1.101 30.00 0.048 1.4 Pipe: 19 0.0 0.0 4.00 150 -1.3 15A 116.0 24.5 16.6 14 1.000 T: 6.0 6.00 -1.7 15 112.0 25.7 16.6 1.101 10.00 0.048 0.5 Pipe: 20 0.0 0.0 14.00 150 1.0 16 116.0 25.4 16.6 15 1.000 T: 6.0 6.00 -0.0 15A 116.0 24.5 16.6 1.101 20.00 0.048 1.0 Pipe: 21 0.0 0.0 12.00 150 0.9 17 116.0 26.3 16.6 15A 1.000 T: 6.0 6.00 -0.0 16 116.0 25.4 16.6 1.101 18.00 0.048 0.9 Pipe: 22 0.0 0.0 33.00 150 2.7 18 114.0 29.0 16.6 16 1.000 T: 6.0 6.00 0.9 17 116.0 26.3 16.6 1.101 39.00 0.048 1.9 Pipe: 23 0.0 0.0 3.00 150 0.4 19 114.0 29.4 16.6 17 1.000 T: 6.0 6.00 -0.0 18 114.0 29.0 16.6 1.101 9.00 0.048 0.4 Pipe: 24 0.0 0.0 13.00 150 1.8 20 112.0 31.2 16.6 18 1.000 T: 6.0 6.00 0.9 19 114.0 29.4 16.6 1.101 19.00 0.048 0.9 Pipe: 25 0.0 0.0 23.00 150 1.4 8 112.0 32.6 16.6 19 1.000 T: 6.0 6.00 -0.0 20 112.0 31.2 16.6 1.101 29.00 0.048 1.4 Notes SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 6 DATE: 6/7/2022 C:\USERS\NICKN\BALLARD RES JUNE CALC.SDF JOB TITLE: BALLARD RS CORRECTED Pipe Tag K-fac Add F1 Add F1 To Fit: L C (Pt) Frm Node E1 (ft) PT (q) Node/ Nom ID Eq.Ln. F (Pe) To Node E1 (ft) PT Tot.(Q) Disch Act ID (ft.) T Pf/ft. (Pf) Pipe: 26 0.0 0.0 28.00 150 6.6 14 112.0 24.3 34.6 100 1.000 E: 7.0 7.00 -0.0 21 112.0 17.7 34.6 1.101 35.00 0.187 6.6 Pipe: 28 4.90 17.6 Disch 7.00 150 4.8 21 112.0 17.7 17.0 101 1.000 2E:14.0 14.00 0.9 100 114.0 12.9 34.6 1.101 21.00 0.187 3.9 Pipe: 29 4.90 17.0 Disch 10.00 150 0.9 100 114.0 12.9 0.0 1.000 E: 7.0 7.00 -0.0 101 114.0 12.0 17.0 1.101 17.00 0.050 0.9 NOTES (HASS): (1) Calculations were performed by the HASS 2021 D computer program in accordance with NFPA13 (2020) under license no. 64621467 granted by HRS Systems, Inc. 208 Southside Square Petersburg, TN 37144 (931) 659-9760 (2) The system has been calculated to provide an average imbalance at each node of 0.001 gpm and a maximum imbalance at any node of 0.008 gpm. (3) Total pressure at each node is used in balancing the system. Maximum water velocity is 15.4 ft/sec at pipe 1. (4) Items listed in bold print on the cover sheet are automatically transferred from the calculation report. (5) Available pressure at source node SOURCE under full flow conditions is 108.87 psi with a flow of 46.96 gpm. (6) PIPE FITTINGS TABLE HASS Pipe Table Name: standard Notes SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 7 DATE: 6/7/2022 C:\USERS\NICKN\BALLARD RES JUNE CALC.SDF JOB TITLE: BALLARD RS CORRECTED PAGE: F MATERIAL: CPVC HWC: 150 Diameter Equivalent Fitting Lengths in Feet (in) F E T R K C G F45 Ell Tee RunT Kplg ChkVly Gate 1.101 1.40 7.00 6.00 1.70 1.00 8.00 0.40 PAGE: * MATERIAL: S40 HWC: 120 Diameter Equivalent Fitting Lengths in Feet (in) E T L C B G A D N Ell -------------------------------------------------------- Tee LngEll ChkVly BfyVly GatVly A1mChk DPVly NPTee F F45Ell 1.025 1.79 4.47 1.79 4.47 5.36 0.89 8.93 1.79 4.47 0.89 2.067 5.00 10.00 3.00 11.00 6.00 1.00 10.00 10.00 10.00 2.50 tqC00 Worldwide I www.tyco-fire.com Contacts RAPID RESPONSE Series LFII Residential 4.9 K-factor Pendent Sprinkler Wet Pipe Systems General Description TYCO RAPID RESPONSE Series LFII Residential 4.9K Pendent and Recessed Pendent Sprinklers (TY2236) are decorative, fast response, frangi- ble bulb sprinklers designed for use in residential occupancies such as homes, apartments, dormitories, and hotels. When aesthetics and optimized flow characteristics are the major con- sideration, the Series LFII Residential Sprinklers (TY2236) should be the first choice. The Series LFII Residential Sprinklers are intended for use in the following scenarios: • wet pipe residential sprinkler sys- tems for one- and two-family dwell- ings and mobile homes per NFPA 13D • wet pipe residential sprinkler sys- tems for residential occupancies up to and including four stories in height per NFPA 13R • wet pipe sprinkler systems for the residential portions of any occu- pancy per NFPA 13 The recessed version of the Series LFII Residential Sprinklers is intended for use in areas with finished ceilings when used with one of the following: • A two-piece Style 15 Recessed Escutcheon with recessed adjust- ment up to 5/8 in. (15,9 mm) from the flush pendent position. IMPORTANT Refer to Technical Data Sheet TFP2300 for warnings pertaining to regulatory and health information. Always refer to Technical Data Sheet TFP700 for the "INSTALLER WARNING" that provides cautions with respect to handling and instal- lation of sprinkler systems and com- ponents. Improper handling and installation can permanently damage a sprinkler system or its compo- nents and cause the sprinkler to fail to operate in a fire situation or cause it to operate prematurely. • A two-piece Style 20 Recessed Escutcheon with recessed adjust- ment up to 1/2 in. (12,7 mm) from the flush pendent position. The adjustment provided by either Recessed Escutcheon reduces the accuracy to which the pipe drops to the sprinklers must be cut. The Series LFII Residential Sprinklers have been designed with heat sensi- tivity and water distribution charac- teristics proven to help in the control of residential fires and to improve the chance for occupants to escape or be evacuated. Corrosion -resistant coatings, where applicable, are utilized to extend the life of copper alloy sprinklers beyond that which would otherwise be obtained when exposed to corrosive atmo- spheres. Although corrosion -resistant coated sprinklers have passed the standard corrosion tests of the appli- cable Approval agencies, the testing is not representative of all possible cor- rosive atmospheres. Consequently, it is recommended that the end user be consulted with respect to the suit- ability of these coatings for any given corrosive environment. The effects of ambient temperature, concentration of chemicals, and gas/chemical velocity should be considered, as a minimum, along with the corrosive nature of the chemical to which the sprinklers will be exposed. NOTICE The Series LFII Residential Pendent and Recessed Pendent Sprinklers (TY2236) described herein must be installed and maintained in compli- ance with this document and the appli- cable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA), in addition to the standards of any authorities having jurisdiction. Failure to do so may impair the performance of these devices. The owner is responsible for main- taining their fire protection system and devices in proper operating con- dition. Contact the installing contrac- tor or product manufacturer with any questions. NSFm 0 Sprinkler Identification Number (SIN) TY2236 TY2236 is a replacement for the TY2234. Technical Data Approvals UL and C-UL Listed Certified to all requirements of NSF/ANSI 61 Note: Sprinklers with a polyester finish are UL Listed as corrosion -resistant sprinklers. See the Design Criteria section for details on these approvals. Maximum Working Pressure 175 psi (12,1 bar) Discharge Coefficient K=4.9 gpm/psi'/2 (70,6 Ipm/bar'/2) Temperature Rating 155T (68°C) or 175°F (79°C) Finishes Natural Brass, Pure White Polyester Coated, Signal White Polyester Coated, Jet Black Polyester Coated, or Chrome Plated Page 1 of 4 SEPTEMBER 2020 TFP403 TFP403 Page 2 of 4 7/16" (11,1 mm) 1/2" ESCUTCHEON Components: NOMINAL NPT PLATE SEATING 1 Frame MAKE -IN SURFACE - 2 Button 3 - Sealing Assembly 1 4- Bulb 5 - Compression 2 Screw 2-1/4" 6 - Deflector* 3 p A (57,2 mm) 4 1-5/8" (41,3 mm) * Temperature 5 rating is L_ indicated on 6 Deflector. CROSS SECTION PENDENT 2-7/8" DIA. (73,0 mm) FX��' � WRENCH �W I STYLE E RECESSED CUTCHEON FLATS / RECESSED PENDENT FIGURE 1 RAPID RESPONSE SERIES LFII RESIDENTIAL 4.9K PENDENT AND RECESSED PENDENT SPRINKLERS (TY2236) 2-7/8" DIA. _ (73,0 mm) 5/8" 15,9 mm (9,5±7,9 mm) 2-1/4" DIA. FLUSH FACE OF (57,2 mm) SPRINKLER MOUNTING FITTING PLATE �vo A F�� , MOUNTINGi SURFACE 1/8" (3,2 mm) CLOSURE TY2236 15/16" (23,8 mm) FIGURE 2 SERIES LFII RECESSED PENDENT SPRINKLER ASSEMBLY WITH TWO-PIECE 518 INCH TOTAL ADJUSTMENT STYLE 15 RECESSED ESCUTCHEON / WRENCH RECESS (END "A" USED FOR TY2236) FIGURE 4 W-TYPE 6 SPRINKLER WRENCH 2-7/8" DIA. (73,0 mm) 1/2" (12,7 mm (7,9±6,4 mm) 2-1/4" DIA. FLUSH FACE OF (57,2 mm) SPRINKLER MOUNTING FITTING � PLATE R MOUNTING SURFACE 1/8" (3,2 mm) CLOSURE TY2236 1-9/16" (39,7 mm) 1-1/16" (27,0 mm) FIGURE 3 SERIES LFII RECESSED PENDENT SPRINKLER ASSEMBLY WITH TWO-PIECE 112 INCH TOTAL ADJUSTMENT STYLE 20 RECESSED ESCUTCHEON WRENCH RECESS PUSH WRENCH IN TO ENSURE ENGAGEMENT WITH SPRINKLER WRENCHING AREA FIGURE 5 W-TYPE 7 RECESSED SPRINKLER WRENCH TFP403 Page 3 of 4 WET PIPE SYSTEM Minimum Flow and Residual Pressure (2)(3) Maximum Coveragge Ordinary Temperature Rating Intermediate Temperature Rating Area ( f1 155°F (68°C) 175°F (79°C) Minimum Deflector to Installation Spacing Flow Pressure Flow Pressure ft x ft Ceiling Type ft (m x m) gpm psi gpm psi (m) (1/min) (bar) (1/min) (bar) 12 x 12 13 7.0 13 7.0 Smooth (3,7 x 3,7) (49,2) (0,48) (49,2) (0,48) Ceilings 1-1/4 in. to 4 in. Recessed us- 14 x 14 13 7.0 13 7.0 (4,3 x 4,3) (49,2) (0,48) (49,2) (0,48) Beamed Ceilings per ing either Style 15 or Style 20 8 16 x 16 13 7.0 13 7.0 (4,9 x 4,9) (49,2) (0,48) (49,2) (0,48) NFPA 13D or 13R 1-1/4 in. to Escutcheon or non -recessed Per NFPA 13D, (2,4) 18 x 18 17 12.0 17 12.0 (5,5 x 5,5) (64,3) (0,83) (64,3) (0,83) 1-3/4 in. below bottom of beam. 13R, or 13 20 x 20 20 16.7 20 16.7 Al x 6,1) (75,7) (1,15) (75,7) (1,15) Notes: 1. For coverage area dimensions less than or between those indicated, use the minimum required flow for the next highest coverage area for which hydraulic design criteria are stated. 2. Requirement is based on minimum flow in gpm (Ipm) from each sprinkler. The associated residual pressures are calculated using the nominal K-factor. See Hydraulic Design under the Design Criteria section. 3. For NFPA 13 residential applications, the greater of 0.1 gpm/ft2 over the design area or the flow in accordance with the criteria in this table must be used. TABLE A WET PIPE SYSTEM SERIES LFII RESIDENTIAL 4.9K PENDENT AND RECESSED PENDENT SPRINKLERS (TY2236) NFPA 13D, 13R, AND 13 HYDRAULIC DESIGN CRITERIA Physical Characteristics Frame .............................Brass Button ........................... Copper Sealing Assembly. . Beryllium Nickel w/TEFLON Bulb (3 mm)........................ Glass Compression Screw ................. Bronze Deflector..........................Bronze Operation The glass bulb contains a fluid that expands when exposed to heat. When the rated temperature is reached, the fluid expands sufficiently to shatter the glass bulb, allowing the sprinkler to activate and flow water. Design Criteria The TYCO RAPID RESPONSE Series LFII Residential 4.9K Pendent and Recessed Pendent Sprinklers are UL and C-UL Listed for installation in accordance with this section. Residential Sprinkler Design Guide When conditions exist that are outside the scope of the provided criteria, refer to the Residential Sprinkler Design Guide TFP490 for the manufactur- er's recommendations that may be acceptable to the local authority having jurisdiction. System Types Per the UL Listing and the C-UL Listing, wet pipe systems may be utilized. Ceiling Types Smooth flat horizontal, or beamed, or sloped, in accordance with the 2013 Edition of NFPA 13D, 13R, or 13, as applicable. Hydraulic Design (NFPA 13D and 13R) For systems designed to NFPA 13D or NFPA 13R, the minimum required sprin- kler flow rates are given in Table A as a function of temperature rating and the maximum allowable coverage areas. The sprinkler flow rate is the minimum required discharge from each of the total number of design sprinklers as specified in NFPA 13D or NFPA 13R. Hydraulic Design (NFPA 13) For systems designed to NFPA 13, the number of design sprinklers is to be the four most hydraulically demanding sprinklers. The minimum required dis- charge from each of the four sprinklers is to be the greater of the following: • The flow rates given in Table A as a function of temperature rating and the maximum allowable coverage area. • A minimum discharge of 0.1 gpm/ft2 over the design area comprised of the four most hydraulically demanding sprinklers for actual coverage areas protected by the four sprinklers. Obstruction to Water Distribution Sprinklers are to be located in accor- dance with the obstruction rules of NFPA 13D, 13R, and 13 as applicable for residential sprinklers as well as with the obstruction criteria described within the Technical Data Sheet TFP490. Operational Sensitivity Sprinklers are to be installed with a deflector -to -ceiling distance of 1 1/4 in. to 4 in. Sprinkler Spacing The minimum spacing between sprin- klers is 8 ft (2,4 m). The maximum spacing between sprinklers cannot exceed the length of the coverage area (Table A) being hydraulically calcu- lated, for example, maximum 12 ft for a 12 ft x 12 ft coverage area, or 20 ft for a 20 ft x 20 ft coverage area. TFP403 Page 4 of 4 Installation TYCO RAPID RESPONSE Series LFII Residential 4.91K Pendent and Recessed Pendent Sprinklers must be installed in accordance with this section. General Instructions Do not install any bulb type sprinkler if the bulb is cracked or there is a loss of liquid from the bulb. With the sprin- kler held horizontally, a small air bubble should be present. The diameter of the air bubble is approximately 1/16 in. (1,6 mm). A leak -tight 1/2 in. NPT sprinkler joint should be obtained by apply- ing a minimum -to -maximum torque of 7 to 14 lb-ft (9,5 to 19,0 N•m). Higher levels of torque can distort the sprin- kler Inlet with consequent leakage or impairment of the sprinkler. Do not attempt to compensate for insufficient adjustment in an Escutch- eon Plate by under- or over- tightening the sprinkler. Re -adjust the position of the sprinkler fitting to suit. Pendent Sprinklers The Series LFII Residential Pendent Sprinklers must be installed in accor- dance with the following instructions. Step 1. Install pendent sprinklers in the pendent position with the deflector par- allel to the ceiling. Step 2. With pipe thread sealant applied to the pipe threads, hand - tighten the sprinkler into the sprinkler fitting. Step 3. Tighten the sprinkler into the sprinkler fitting using only the W-Type 6 Sprinkler Wrench, as shown in Figure 4. With reference to Figure 1, apply the W-Type 6 Sprinkler Wrench to the wrench flats. Recessed Pendent Sprinklers The Series LFII Residential Recessed Pendent Sprinklers must be installed in accordance with the following instructions. Step A. Install the recessed pendent sprinklers in the pendent position with the deflector parallel to the ceiling. Step B. After installing either the Style 15 or the Style 20 Mounting Plate over the sprinkler threads, and with pipe thread sealant applied to the pipe threads, hand -tighten the sprinkler into the sprinkler fitting. Step C. Tighten the sprinkler into the sprinkler fitting using only the W-Type 7 Recessed Sprinkler Wrench, as shown in Figure 5. With reference to Figure 1, apply the W-Type 7 Recessed Sprinkler Wrench to the sprinkler wrench flats. Step D. After the ceiling has been installed, or the finish coat has been applied, slide on either the Style 15 Closure or the Style 20 Closure over the Series LFII Residential Sprinkler and push the Closure over the Mounting Plate until its flange comes in contact with the ceiling. Care and Maintenance TYCO RAPID RESPONSE Series LFII Residential 4.91K Pendent and Recessed Pendent Sprinklers must be maintained and serviced in accordance with this section. Before closing a fire protection system main control valve for maintenance work on the fire protection system that it controls, permission to shut down the affected fire protection system must be obtained from the proper authorities and notify all personnel who may be affected by this action. Absence of the outer piece of an escutcheon, which is used to cover a clearance hole, can delay sprinkler operation in a fire situation. The owner must assure that the sprin- klers are not used for hanging any objects and that the sprinklers are only cleaned by means of gently dusting with a feather duster; otherwise, non - operation in the event of a fire or inad- vertent operation may result. Sprinklers which are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated, or other- wise altered after leaving the factory. Modified sprinklers must be replaced. Sprinklers that have been exposed to corrosive products of combustion, but have not operated, should be replaced if they cannot be completely cleaned by wiping the sprinkler with a cloth or by brushing it with a soft bristle brush. Care must be exercised to avoid damage to the sprinklers before, during, and after installation. Sprin- klers damaged by dropping, striking, wrench twist/slippage, or the like, must be replaced. Also, replace any sprinkler that has a cracked bulb or that has lost liquid from its bulb. Seethe Installation section. The owner is responsible for the inspec- tion, testing, and maintenance of their fire protection system and devices in compliance with this document, as well as with the applicable standards of the NATIONAL FIRE PROTECTION ASSO- CIATION, such as NFPA 25, in addi- tion to the standards of any authorities having jurisdiction. Contact the install- ing contractor or product manufacturer with any questions. Automatic sprinkler systems are rec- ommended to be inspected, tested, and maintained by a qualified Inspec- tion Service in accordance with local requirements and/or national codes. Limited Warranty For warranty terms and conditions, visit www.tyco-fire.com. Ordering Procedure Contact your local distributor for avail- ability. When placing an order, indicate the full product name and part number (P/N). Sprinkler Assemblies Specify: Series LFII 4.9K Residential Pendent Sprinkler (TY2236), (specify temperature rating), with (specify) finish, P/N (specify): 155°F(68°C) Natural Brass ................. 51-212-1-155 Pure White (RAL 9010) Polyester', 2 .................. 51-212-3-155 Signal White (RAL 9003) Polyester' .................... 51-212-4-155 Jet Black (RAL 9005) Polyester' .................... 51-212-5-155 Chrome Plated ................ 51-212-9-155 175°F(79°C) Natural Brass ..................51-212-1-175 Pure White (RAL 9010) Polyesters, 2 .................. 51-212-3-175 Signal White (RAL 9003) Polyester' .................... 51-212-4-175 Jet Black (RAL 9005) Polyester' .................... 51-212-5-175 Chrome Plated ................ 51-212-9-175 1. UL Listed as corrosion -resistant. 2. Eastern Hemisphere sales only. Recessed Escutcheon Specify: Style 15 Escutcheon with (specify*) finish, P/N (specify*) or Style 20 Recessed Escutcheon with (specify*) finish, P/N (specify*) * Refer to Technical Data Sheet TFP770. Sprinkler Wrenches Specify: W-Type 6 Sprinkler Wrench, P/N 56-000-6-387 Specify: W-Type 7 Sprinkler Wrench, P/N 56-850-4-001 1400 Pennbrook Parkway, Lansdale, PA 19446 I Telephone +1-215-362-0700 O 2019 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice. NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association; TEFLON Is a reglstered tratlemark of DuPont Johnson 01,to Controls tqC00 Worldwide I www.tyco-fire.com Contacts RAPID RESPONSE Series LFII Residential Sprinklers 5.8 K-factor Pendent and Recessed Pendent Wet Pipe Systems General Description The TYCO RAPID RESPONSE Series LFII Residential Pendent and Recessed Pendent Sprinklers (TY3934) are dec- orative, fast response, frangible bulb sprinklers designed for use in residen- tial occupancies such as homes, apart- ments, dormitories, and hotels. When aesthetics and optimized flow charac- teristics are the major consideration, the Series LFII Residential Sprinklers (TY3934) should be the first choice. The Series LFII Residential Sprinklers are intended for use in the following scenarios: • wet pipe residential sprinkler sys- tems for one- and two-family dwell- ings and mobile homes per NFPA 13D • wet pipe residential sprinkler sys- tems for residential occupancies up to and including four stories in height per NFPA 13R • wet pipe sprinkler systems for the residential portions of any occu- pancy per NFPA 13 The recessed version of the Series LFII Residential Sprinklers is intended for use in areas with finished ceil- ings. It employs a two-piece Style 20 Recessed Escutcheon. The Recessed Escutcheon provides 1/4 in. (6,4 mm) of recessed adjustment or up to 1/2 in. (12,7 mm) of total adjustment from the flush ceiling position. The adjustment IMPORTANT Refer to Technical Data Sheet TFP2300 for warnings pertaining to regulatory and health information. Always refer to Technical Data Sheet TFP700 for the "INSTALLER WARNING" that provides cautions with respect to handling and instal- lation of sprinkler systems and com- ponents. Improper handling and installation can permanently damage a sprinkler system or its compo- nents and cause the sprinkler to fail to operate in a fire situation or cause it to operate prematurely. provided by the Recessed Escutcheon reduces the accuracy to which the pipe drops to the sprinklers must be cut. The Series LFII Residential Sprinklers have been designed with heat sensi- tivity and water distribution charac- teristics proven to help in the control of residential fires and to improve the chance for occupants to escape or be evacuated. Corrosion -resistant coatings, where applicable, are utilized to extend the life of copper alloy sprinklers beyond that which would otherwise be obtained when exposed to corrosive atmo- spheres. Although corrosion -resistant coated sprinklers have passed the standard corrosion tests of the appli- cable Approval agencies, the testing is not representative of all possible cor- rosive atmospheres. Consequently, it is recommended that the end user be consulted with respect to the suit- ability of these coatings for any given corrosive environment. The effects of ambient temperature, concentration of chemicals, and gas/chemical velocity should be considered, as a minimum, along with the corrosive nature of the chemical to which the sprinklers will be exposed. NOTICE The Series LFII Residential Pendent and Recessed Pendent Sprinklers (TY3934) described herein must be installed and maintained in compliance with this doc- ument and the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA), in addition to the standards of any authorities having jurisdiction. Failure to do so may impair the performance of these devices. The owner is responsible for main- taining their fire protection system and devices in proper operating con- dition. Contact the installing contrac- tor or product manufacturer with any questions. Sprinkler Identification Number (SIN) TY3934 Page 1 of 4 DECEMBER 2018 TFP401 TFP401 Page 2 of 4 Components: ESCUTCHEON PLATE 112" 7/16" (11,1 mm) STYLE 20 1 - Frame SEATING SURFACE NPT NOMINAL MAKE -IN RECESSED 2 - Button + ESCUTCHEON 3 - Sealing 1 Assembly \ 4 - Bulb 3 5 -Compression 2^ 1 Screw 2 (50,8 mm) 6 - Deflector* 4 1-3/8" (34,9 mm) * Temperature 5 WRENCH FLATS rating is indicated 6* on Deflector DEFLECTOR * 2-7/8" (73,0 mm) DIA. — CROSS SECTION PENDENT RECESSED PENDENT FIGURE f RAPID RESPONSE SERIES LFII RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS (TY3934) Technical Data Approvals UL and C-UL Listed Certified to all requirements of NSF/ANSI 61 Note: Sprinklers with a polyester finish are UL Listed as corrosion -resistant sprinklers. Discharge Coefficient K = 5.8 GPM/psi'/2 (83,5 LPM/bar'/2) Temperature Rating 155°F (68°C) or 175°F (79°C) Finishes Natural Brass, Pure White Polyester Coated, Signal White Polyester Coated, Jet Black Polyester Coated, or Chrome Plated Physical Characteristics Frame .............................Brass Button............................Bronze Sealing Assembly. . Beryllium Nickel w/TEFLON Bulb (3 mm)........................ Glass Compression Screw .................. Brass Deflector...........................Brass Operation The glass bulb contains a fluid that expands when exposed to heat. When the rated temperature is reached, the fluid expands sufficiently to shatter the glass bulb, allowing the sprinkler to activate and flow water. Design Criteria The TYCO RAPID RESPONSE Series LFII Residential Pendent and Recessed Pendent Sprinklers (TY3934) are to be installed in accordance with this section. Residential Sprinkler Design Guide When conditions exist that are outside the scope of the provided criteria, refer to the Residential Sprinkler Design Guide TFP490 for the manufactur- er's recommendations that may be acceptable to the local authority having jurisdiction. Ceiling Types Smooth flat horizontal, or beamed, or sloped, in accordance with the 2013 Edition of NFPA 13D, 13R, or 13 as applicable. Hydraulic Design (NFPA 13D and 13R) For systems designed to NFPA 13D or NFPA 13R, the minimum required sprin- kler flow rates are given in Table A as a function of temperature rating and the maximum allowable coverage areas. The sprinkler flow rate is the minimum required discharge from each of the total number of design sprinklers as specified in NFPA 13D or NFPA 13R. The number of design sprinklers speci- fied in NFPA 13D and 13R for wet pipe systems is to be applied when design- ing dry pipe systems. Hydraulic Design (NFPA 13) For systems designed to NFPA 13, the number of design sprinklers is to be the four most hydraulically demanding sprinklers. The minimum required dis- charge from each of the four sprinklers is to be the greater of the following: • The flow rates given in Table A as a function of temperature rating and the maximum allowable coverage area. • A minimum discharge of 0.1 gpm/ft2 over the design area comprised of the four most hydraulically demanding sprinklers for actual coverage areas protected by the four sprinklers. Obstruction to Water Distribution Sprinklers are to be located in accor- dance with the obstruction rules of NFPA 13D, 13R, and 13 as applicable for residential sprinklers as well as with the obstruction criteria described within the Technical Data Sheet TFP490. Operational Sensitivity Sprinklers are to be installed with a deflector -to -ceiling distance of 1 in. to 4 in. below smooth ceilings. For Beamed Ceiling conditions as allowed by NFPA, the maximum deflec- tor distance below the bottom of a beam is 1-3/4 in. Refer to the NFPA Standards for allowed beam configurations. Sprinkler Spacing The minimum spacing between sprin- klers is 8 ft (2,4 m). The maximum spacing between sprinklers cannot exceed the length of the coverage area (Table A) being hydraulically calculated (for example, maximum 12 ft for a 12 ft x 12 ft coverage area, or 20 ft for a 20 ft x 20 ft coverage area). TFP401 Page 3 of 4 WET PIPE SYSTEM Minimum Flow and Residual Pressure(b. °) Max. Coverage ordinary Temp. Rating Intermediate Temp. Rating Area (a) 155°F (68°C) 175°F (79°C) Minimum Deflector to Installation Spacing Flow Pressure Flow Pressure ft x ft Ceiling Type ft (m x m) gpm psi gpm psi (m) (Ipm) (bar) (Ipm) (bar) 12 x 12 16 7.6 16 7.6 Smooth (3,7 x 3,7) (60,6) (0,52) (60,6) (0,52) Ceilings 1 in. to Recessed 14 x 14 16 7.6 16 7.6 (4,3 x 4,3) (60,6) (0,52) (60,6) (0,52) 4 in. Beamed using Style 20 Escutcheon or 8 16 x 16 16 7.6 16 7.6 (4,9 x 4,9) (60,6) (0,52) (60,6) (0,52) Ceilings per NFPA 13D or 13R non -recessed per NFPA 13D, 13R, or 13 (2,4) 18 x 18 18 9.6 18 9.6 (5,5 x 5,5) (68,1) (0,66) (68,1) (0,66) 1 in. to 1-3/4 in. below bottom 20 x 20 20 11.9 20 11.9 (6,1 x 6,1) (75,7) (0,82) (75,7) (0,82) of beam. Notes: a. For coverage area dimensions less than or between those indicated, use the minimum required flow for the next highest coverage area for which hydraulic design criteria are stated. b. Requirement is based on minimum flow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated using the nominal K-factor. See Hydraulic Design under the Design Criteria section. c. For NFPA 13 residential applications, the greater of 0.1 gpm/ftz over the design area or the flow in accordance with the criteria in this table must be used. TABLE A WET PIPE SYSTEM SERIES LFII RESIDENTIAL PENDENT AND RECESSED PENDENT SPRINKLERS (TY3934) NFPA 13D, 13R, AND 13 HYDRAULIC DESIGN CRITERIA 2-7/8" DIA. _ (73,0 mm) FACE OF SPRINKLER 2-1/4" DIA. FITTING (57,2 mm) 5/16±1/4" (7,9t6,4 mm) 1/2" (12,7 mm) FLUSH I MOUNTING 1/8" SURFACE (3,2 mm) CLOSURE TY3934 MOUNTING 1-3/8" (34,9 mm) PLATE 7/8" (22,2 mm) FIGURE 2 STYLE 20 RECESSED ESCUTCHEON FOR USE WITH THE RAPID RESPONSE SERIES LFII RESIDENTIAL PENDENT SPRINKLER (TY3934) Installation The TYCO RAPID RESPONSE Series LFII Residential Pendent and Recessed Pendent Sprinklers (TY3934) must be installed in accordance with this section. General Instructions Do not install any bulb type sprinkler if the bulb is cracked or there is a loss of liquid from the bulb. With the sprin- kler held horizontally, a small air bubble should be present. The diameter of the air bubble is approximately 1/16 in. (1,6 mm). A leak -tight 1/2 in. NPT sprinkler joint should be obtained by applying a minimum -to -maximum torque of 7 to 14 lb-ft (9,5 to 19,0 N•m). Higher levels of torque can distort the sprinkler Inlet with consequent leakage or impairment of the sprinkler. Do not attempt to compensate for insufficient adjustment in an Escutch- eon Plate by under- or over- tightening the sprinkler. Re -adjust the position of the sprinkler fitting to suit. WRENCH RECESS (USE ONLY END "A") FIGURE 3 W-TYPE 6 SPRINKLER WRENCH WRENCH RECESS PUSH WRENCH IN TO ENSURE ENGAGEMENT WITH SPRINKLER WRENCHING AREA FIGURE 4 W-TYPE 7 RECESSED SPRINKLER WRENCH TFP401 Page 4 of 4 Series LFII Residential Pendent Sprinkler Installation The Series LFII Residential Pendent Sprinklers must be installed in accor- dance with the following instructions. Step 1. Install pendent sprinklers in the pendent position with the deflector par- allel to the ceiling. Step 2. With pipe thread sealant applied to the pipe threads, hand - tighten the sprinkler into the sprinkler fitting. Step 3. Tighten the sprinkler into the sprinkler fitting using only the W-Type 6 Sprinkler Wrench (Figure 3). With ref- erence to Figure 1, apply the W-Type 6 Sprinkler Wrench to the wrench flats. Series LFII Residential Recessed Pendent Sprinkler Installation The Series LFII Residential Recessed Pendent Sprinklers must be installed in accordance with the following instructions. Step A. Install recessed pendent sprin- klers in the pendent position with the deflector parallel to the ceiling. Step B. After installing the Style 20 Mounting Plate over the sprinkler threads and with pipe thread sealant applied to the pipe threads, hand - tighten the sprinkler into the sprinkler fitting. Step C. Tighten the sprinkler into the sprinkler fitting using only the W-Type 7 Recessed Sprinkler Wrench (Figure 4). With reference to Figure 1, apply the W-Type 7 Recessed Sprinkler Wrench to the sprinkler wrench flats. Step D. After the ceiling has been installed or the finish coat has been applied, slide on the Style 20 Closure over the Series LFII Residential Sprin- kler and push the Closure over the Mounting Plate until its flange comes in contact with the ceiling. Care and Maintenance The TYCO RAPID RESPONSE Series LFII Residential Pendent and Recessed Pendent Sprinklers (TY3934) must be maintained and serviced in accordance with this section. Before closing a fire protection system main control valve for maintenance work on the fire protection system that it controls, permission to shut down the affected fire protection system must be obtained from the proper authorities and notify all personnel who may be affected by this action. Absence of the outer piece of an escutcheon, which is used to cover a clearance hole, can delay sprinkler operation in a fire situation. The owner must assure that the sprin- klers are not used for hanging any objects and that the sprinklers are only cleaned by means of gently dusting with a feather duster; otherwise, non - operation in the event of a fire or inad- vertent operation may result. Sprinklers which are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated, or other- wise altered after leaving the factory. Modified sprinklers must be replaced. Sprinklers that have been exposed to corrosive products of combustion, but have not operated, should be replaced if they cannot be completely cleaned by wiping the sprinkler with a cloth or by brushing it with a soft bristle brush. Care must be exercised to avoid damage to the sprinklers - before, during, and after installation. Sprin- klers damaged by dropping, striking, wrench twist/slippage, or the like, must be replaced. Also, replace any sprinkler that has a cracked bulb or that has lost liquid from its bulb. Seethe Installation Section. The owner is responsible for the inspection, testing, and maintenance of their fire protection system and devices in compliance with this document, as well as with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION, for example, NFPA 25, in addition to the standards of any authorities having jurisdiction. Contact the installing contractor or product manufacturer regarding any questions. Automatic sprinkler systems are rec- ommended to be inspected, tested, and maintained by a qualified Inspec- tion Service in accordance with local requirements and/or national codes. Limited Warranty For warranty terms and conditions, visit www.tyco-fire.com. Ordering Procedure Contact your local distributor for availability. When placing an order, indicate the full product name and Part Number (P/N). Sprinkler Assembly Specify: Series LFII (TY3934), K = 5.8, Residential Pendent Sprinkler, (specify) temperature rating, (specify) finish, P/N (specify): 155°F(68°C) Natural Brass ................. 51-058-1-155 Pure White (RAL 9010) Polyester', 2 ..................51-058-3-155 Signal White (RAL 9003) Polyester' .................... 51-058-4-155 Jet Black (RAL 9005) Polyester' .................... 51-058-5-155 Chrome Plated ................51-058-9-155 175°F(79°C) Natural Brass ................. 51-058-1-175 Pure White (RAL 9010) Polyester', 2 .................. 51-058-3-175 Signal White (RAL 9003) Polyester' .................... 51-058-4-175 Jet Black (RAL 9005) Polyester' .................... 51-058-5-175 Chrome Plated ................ 51-058-9-175 1. ILL Listed as corrosion -resistant. 2. Eastern Hemisphere sales only. Recessed Escutcheon Specify: Style 20 Recessed Escutch- eon with (specify') finish, P/N (specify') 'Refer to Technical Data Sheet TFP770 Sprinkler Wrench Specify: W-Type 6 Sprinkler Wrench, P/N 56-000-6-387 Specify: W-Type 7 Sprinkler Wrench, P/N 56-850-4-001 1400 Pennbrook Parkway, Lansdale, PA 19446 I Telephone +1-215-362-0700 m 2019 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice. NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association; TEFLON Is a registered tratlemark of DuPont Johnson 01,to Controls tqC00 Worldwide I www.tyco-fire.com Contacts RAPID RESPONSE Series LFII Residential 4.9 K-factor Concealed Pendent Sprinkler Flat Plate, Wet Pipe and Dry Pipe Systems General Description The TYCO RAPID RESPONSE Series LFII Residential 4.9K Concealed Pendent Sprinklers (TY3596) are dec- orative, fusible solder sprinklers, avail- able in both ordinary 160°F (71°C) and intermediate 212°F (100°C) tempera- ture rated configurations. They are designed for use in residential occu- pancies such as homes, apartments, dormitories, and hotels. The cover plate assembly conceals the sprinkler operating components above the ceiling. The flat profile of the cover plate provides the optimum aes- thetically appealing sprinkler design. In addition, the concealed design of the Series LFII Residential Con- cealed Pendent Sprinklers provides 1/2 in. (12,7 mm) vertical adjustment. This adjustment provides a measure of flexibility when cutting fixed sprin- kler drops. The Series LFII Residential Concealed Pendent Sprinklers are intended for use in the following scenarios: • Wet and dry pipe residential sprin- kler systems for one and two fam- ily dwellings and mobile homes per NFPA 13D • Wet and dry pipe residential sprin- kler systems for residential occupan- cies up to and including four stories in height per NFPA 13R IMPORTANT Refer to Technical Data Sheet TFP2300 for warnings pertaining to regulatory and health information. Always refer to Technical Data Sheet TFP700 for the "INSTALLER WARNING" that provides cautions with respect to handling and instal- lation of sprinkler systems and com- ponents. Improper handling and installation can permanently damage a sprinkler system or its compo- nents and cause the sprinkler to fail to operate in a fire situation or cause it to operate prematurely. • Wet and dry pipe sprinkler systems for the residential portions of any occupancy per NFPA 13 The Series LFII Residential Concealed Pendent Sprinklers have been designed with heat sensitivity and water distri- bution characteristics proven to help in the control of residential fires and to improve the chance for occupants to escape or be evacuated. The Series LFII Residential Con- cealed Pendent Sprinklers (TY3596) are shipped with a Disposable Protec- tive Cap. The Protective Cap is tem- porarily removed for installation, and then it can be replaced to help protect the sprinkler while the ceiling is being installed or finished. The tip of the Pro- tective Cap can also be used to mark the center of the ceiling hole into the plaster board, ceiling tiles, and so on, by gently pushing the ceiling product against the Protective Cap. When the ceiling installation is complete the Pro- tective Cap is removed and the Cover Plate Assembly is installed. Dry Pipe System Application The 160°F (71°C) temperature rated Series LFII Residential Concealed Pendent Sprinklers offer a laboratory approved option for designing dry pipe residential sprinkler systems, whereas, most residential sprinklers are labora- tory approved for wet systems only. Through extensive testing, it has been determined that the number of design sprinklers (hydraulic design area) for the Series LFII Residential Concealed Pendent Sprinklers need not be increased over the number of design sprinklers (hydraulic design area) as specified for wet pipe sprinkler systems, as is accustomed for density/ area sprinkler systems designed per NFPA 13. Consequently, the Series LFII Residen- tial Concealed Pendent Sprinklers offer the features of non -water filled pipe in addition to not having to increase the number of design sprinklers (hydraulic design area) for systems designed to NFPA 13, 13D, or 13R. NOTICE The Series LFII Residential Concealed Pendent Sprinklers (TY3596) described herein must be installed and main- tained in compliance with this docu- ment and with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA), in addition to the standards of any authorities having jurisdiction. Failure to do so may impair the performance of these devices. The owner is responsible for main- taining their fire protection system and devices in proper operating con- dition. Contact the installing contrac- tor or product manufacturer with any questions. Sprinkler Identification Number (SIN) TY3596 Page 1 of 6 SEPTEMBER 2019 TFP442 TFP442 Page 2 of 6 Technical Data Approvals UL and C-UL Listed NYC Approved under MEA 44-03-E-2NSF Certified to all requirements of NSF/ANSI 61 Australian WaterMark Certified The TYCO RAPID RESPONSE Series LFII Residential Concealed Pendent Sprinklers are Listed only when installed with LFII Con- cealed Cover Plates having factory -applied finishes. Sprinklers and Cover Plates are separately ordered. See the Ordering Procedure section for more information. Maximum Working Pressure 175 psi (12,1 bar) Discharge Coefficient K=4.9 GPM/psi' (70,6 LPM/bar") Temperature Rating Ordinary 160°F (71°C) Sprinkler/ 139°F (59°C) Cover Plate NOTE: Maximum Ambient Ceiling Temperature for the ordinary temperature configuration is 100°F (38°C) Intermediate* 212°F (100°C) Sprinkler/ 165°F (74°C) Cover Plate *For wet pipe systems only NOTE: Maximum Ambient Ceiling Temperature for the intermediate temperature configuration is 150°F (65°C) Vertical Adjustment 1/2 in. (12,7 mm) Finishes See the Ordering Procedure section Physical Characteristics Body..............................Brass Cap..............................Bronze Saddle.............................Brass Sealing Assembly. Beryllium Nickel w/TEFLON Soldered Link Halves ................ Nickel Lever.............................Bronze Compression Screw .................. Brass Deflector .................. Copper or Brass Guide Pin Housing ..................Bronze Guide Pins ......... Stainless Steel or Bronze Support Cup ....................... Steel Cover Plate ................. Copper/Brass** Retainer ......................... Copper Cover Plate Ejection Spring .... Stainless Steel ** Brass Cover Plate is offered for Intermediate Tem- perature 165°F (74°C) only. Operation When exposed to heat from a fire, the Cover Plate, which is normally soldered to the Retainer at three points, falls away to expose the sprinkler assembly. At this point the Deflector supported by the Arms drops down to its operated position. The fusible link of the sprin- kler assembly is comprised of two link halves that are soldered together with a thin layer of solder. When the rated temperature is reached, the solder melts and the two link -halves separate BODY (1/2" NP CAP SADDLI SUPPOF CUP W11 ROLL FORI THREAC GUIDE PIN GUIDE P HOUSIN THREADINTO SUPPOR CUP UNT MOUNTIN SURFACE FLUSH WI' CEILING SOLDEF TAB SPRINKLER ASSEMBLY ASSEMBLY FIGURE 1 RAPID RESPONSE SERIES LFII RESIDENTIAL CONCEALED PENDENT SPRINKLER (TY3596) allowing the sprinkler to activate and flow water. Design Criteria The TYCO RAPID RESPONSE Series LFII Residential Concealed Pendent Sprinklers (TY3596) are UL and C-UL Listed for installation in accordance with this section. Note: When conditions exist that are outside the scope of the provided cri- teria, refer to the Residential Sprinkler Design Guide TFP490 for the manu- facturer's recommendations that may be acceptable to the authority having jurisdiction. System Types Per the UL and C-UL Listing, the 160°F (71°C) and 212°F (100°C) LFII Residential Concealed Pendent Sprin- klers may be utilized in wet pipe systems. Only the 160°F (71°C) LFII Res- ;EALING )SEMBLY 'RINKLER IENCHING AREA 1PRESSION SCREW LEVER _DER LINK LEMENT FLECTOR PERATED OSITIOM RETAINER H THREAD )IMPLES JECTION SPRING COVER PLATE idential Concealed Pendent Sprinklers may be utilized in dry pipe systems, per the UL and C-UL Listing. Refer to Technical Data Sheet TFP485 about the use of residential sprinklers in residential dry pipe systems. Ceiling Types Smooth flat horizontal, beamed, or sloped in accordance with NFPA 13D, 13R, or 13 as applicable. Hydraulic Design (NFPA 13D and 13R) For systems designed to NFPA 13D or NFPA 13R, the minimum required sprin- kler flow rates are given in Tables A and B as a function of temperature rating and the maximum allowable coverage areas. The sprinkler flow rate is the minimum required discharge from each of the total number of "design sprinklers" as specified in NFPA 13D or NFPA 13R. TFP442 Page 3 of 6 WET PIPE SYSTEM Minimum Flow and Residual Pressure2,3 Maximum Coverage Maximum Temp. Rating Area' p Sfting 160°F (71°C), 212°F (100°C) Minimum ft x ft (m) Deflector to Installation Spacing (m x m) Flow Pressure Ceiling Type ft GPM psi (m) (LPM) (bar) 12 x 12 12 13 7.0 (3,7 x 3,7) (3,7) (49,2) (0,48) Smooth Ceilings 14 x 14 14 13 7.0 7/8 to 1-1/8 in. (4,3 x 4,3) (4,3) (49,2) (0,48) Beamed Ceilings per NFPA 13D or Concealed 8 16 x 16 16 13 7.0 (4,9 x 4,9) (4,9) (49,2) (0,48) 13R, or 13. Installed in (2,4) 18 x 18 18 17 12.0 beam (5,5 x 5,5) (5,5) (64,3) (0,83) 7/8 to 1-1/8 in. below bottom 20 x 20 20 20 16.7 of beam (6,1 x 6,1) (6,1) (75,7) (1,15) Notes: 1. For coverage area dimensions less than or between those indicated, use the minimum required flow for the next highest coverage area for which hydraulic design criteria are stated. 2. Requirement is based on minimum flow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated using the nominal K-factor. See Hydraulic Design under the Design Criteria section. 3. For NFPA 13 residential applications, the greater of 0.1 GPM/ft2 over the design area or the flow in accordance with the criteria in this table must be used. TABLE A WET PIPE SYSTEM SERIES LFII RESIDENTIAL 4.9 K-FACTOR FLAT PLATE CONCEALED PENDENT SPRINKLER (TY3596) NFPA 13D, 13R, AND 13 HYDRAULIC DESIGN CRITERIA DRY PIPE SYSTEM Minimum Flowand Residual Pressure 2,3 Maximum Coverage Maximum Ordinary Temp. Rating Area' Spacing 160°F (71°C) Minimum ft x ft (m) Deflector to Installation Spacing (m x m) Flow Pressure Ceiling Type ft GPM psi (m) (LPM) (bar) 12 x 12 12 13 7.0 (3,7 x 3,7) (3,7) (49,2) (0,48) Smooth Ceilings 14 x 14 14 14 8.2 7/8 to 1-1/8 in. (4,3 x 4,3) (4,3) (53,0) (0,57) Beamed Ceilings per NFPA 13D or Concealed 8 16 x 16 16 15 9.4 (4,9 x 4,9) (4,9) (56,8) (0,65) 13R, or 13. Installed in (2,4) 18 x 18 18 18 13.5 beam (5,5 x 5,5) (5,5) (68,1) (0,93) 7/8 to 1-1/8 in. below bottom 20 x 20 20 21 18.4 of beam (6,1 x 6,1) (6,1) (79,5) (1,27) Notes: 1. For coverage area dimensions less than or between those indicated, use the minimum required flow for the next highest coverage area for which hydraulic design criteria are stated. 2. Requirement is based on minimum flow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated us- ing the nominal K-factor. See Hydraulic Design under the Design Criteria section. 3. For NFPA 13 residential applications, the greater of 0.1 GPM/ft2 over the design area or the flow in accordance with the criteria in this table must be used. TABLE B DRY PIPE SYSTEM RAPID RESPONSE SERIES LFII RESIDENTIAL 4.9 K-FACTOR FLAT PLATE CONCEALED PENDENT (TY3596) NFPA 13D, 13R, AND 13 HYDRAULIC DESIGN CRITERIA TFP442 Page 4 of 6 2-1/2" DIA. _ (63,5 mm) 1/2" (12,7 mm) 1/2 THREADED NPT, ADJUSTMENT COVER- SPRINKLER - RETAINER SUPPORT CUP ASSEMBLY ASSEMBLY 3-3/16" DIA. _ (81,0 mm) TEMPERATURE RATING PROFILE DEPTH AIR GAP ORDINARY 3/16" (4,8 mm) 1/8" (3,2 mm) INTERMEDIATE 5/32" (4,0 mm) 3/32" (2,4 mm) 1 FACE OF SPRINKLER 1-7/8"t1/4" FITTING (47,6 mm MOUNTING t6,4 mm) SURFACE � t PROFILE AIR DEPTH GAP (SEE (SEE TABLE) TABLE) SPRINKLER SUPPORT Cl ASSEMBLY 5/8" (15,9 mr 1-1/8" (28,6 m LE TIP PROTECTIVE CAP COVER PLATE OPERATED RETAINER SPRINKLER DEFLECTOR IN OPERATED POSITION FIGURE 2 RAPID RESPONSE SERIES LFII RESIDENTIAL CONCEALED PENDENT SPRINKLER (TY3596) INSTALLATION DIMENSIONS, PROTECTIVE CAP, AND ACTIVATED DEFLECTOR The number of "design sprinklers" specified in NFPA 13D and 13R for wet pipe systems is to be applied when designing dry pipe systems. Hydraulic Design (NFPA 13) For systems designed to NFPA 13, the number of design sprinklers is to be the four most hydraulically demanding sprinklers. The minimum required dis- charge from each of the four sprinklers is to be the greater of the following: • The flow rates given in Tables A and B as a function of temperature rating and the maximum allowable cover- age area • A minimum discharge of 0.1 GPM/ft2 over the design area comprised of the four most hydrauli- cally demanding sprinklers for actual coverage areas protected by the four sprinklers The number of design sprinklers speci- fied in NFPA 13 for wet pipe systems is to be applied when designing dry pipe systems. Dry Pipe System Water Delivery When using the Series LFII Residen- tial Concealed Pendent Sprinklers in dry pipe sprinkler systems, the time for water delivery must not exceed 15 seconds for the most remote operat- ing sprinkler. Obstruction to Water Distribution Sprinklers are to be located in accor- dance with the obstruction rules of NFPA 13D, 13R, and 13 as applicable for residential sprinklers as well as with the obstruction criteria described within the Technical Data Sheet TFP490. Operational Sensitivity The sprinklers are to be installed rela- tive to the ceiling mounting surface as shown in Figure 2. Sprinkler Spacing The minimum spacing between sprin- klers is 8 ft (2,4 m). The maximum spacing between sprinklers cannot exceed the length of the coverage area (see Table A or B) being hydraulically calculated, for example, maximum 12 ft for a 12 ft x 12 ft coverage area, or 20 ft for a 20 ft x 20 ft coverage area. The Series LFII must not be used in applications where the air pres- sure above the ceiling is greater than that below. Down drafts through the Support Cup could delay sprinkler operation in a fire situation. Installation The TYCO RAPID RESPONSE Series LFII Residential Concealed Pendent Sprinklers (TY3596) must be installed in accordance with this section. General Instructions Damage to the fusible Link Assembly during installation can be avoided by handling the sprinkler by the support cup only. Therefore, do not apply pres- sure to the fusible Link Assembly. A 1/2 in. NPT sprinkler joint should be obtained with a minimum to maximum torque of 7 to 14 lb-ft (9,5 to 19,0 N•m). Higher levels of torque may distort the sprinkler inlet with consequent leakage or impairment of the sprinkler. Do not attempt to compensate for insufficient adjustment in the Cover Plate Assembly by under -or over - tightening the Sprinkler. Readjust the position of the sprinkler fitting to suit. WRENCH RECESS PUSH WRENCH IN TO ENSURE ENGAGEMENT WITH SPRINKLER WRENCHING AREA FIGURE 3 W-TYPE 18 SPRINKLER WRENCH Step 1. The sprinkler must only be installed in the pendent position and with the centerline of the sprinkler per- pendicular to the mounting surface. Step 2. Remove the Protective Cap. Step 3. With pipe thread sealant applied to the pipe threads, and using the W-Type 18 Wrench shown in Figure 3, install and tighten the Sprinkler/ Support Cup Assembly into the fitting. The W-Type 18 Wrench will accept a 1/2 in. ratchet drive. Step 4. Replace the Protective Cap by pushing it upwards until it bottoms out against the Support Cup. The Protec- tive Cap helps prevent damage to the Deflector and Guide Pins during ceiling installation and/or during application of the finish coating of the ceiling. It may also be used to locate the center of the clearance hole by gently pushing the ceiling material against the center point of the Cap. TFP442 Page 5 of 6 Note: As long as the protective Cap remains in place, the system is consid- ered to be "Out Of Service." Step 5. After the ceiling has been com- pleted with the 2-1/2 in. (63 mm) diam- eter clearance hole and in preparation for installing the Cover Plate Assembly, remove and discard the Protective Cap, and verify that the Deflector moves up and down freely. If the sprinkler has been damaged and the Deflector does not move up and down freely, replace the entire sprinkler assembly. Do not attempt to modify or repair a damaged sprinkler. Step 6. Push on the Cover Plate Assembly until its flange comes in contact with the ceiling. Do not continue to push on the Cover Plate Assembly such that it lifts a ceiling panel out of its normal position. If the Cover Plate Assembly cannot be engaged with the Mounting Cup or the Cover Plate Assembly cannot be engaged sufficiently to contact the ceiling, the Sprinkler Fitting must be repositioned. Care and Maintenance The TYCO RAPID RESPONSE Series LFII Residential Concealed Pendent Sprinklers (TY3596) must be maintained and serviced in accordance with this section. Before closing a fire protection system main control valve for maintenance work on the fire protection system which it controls, permission to shut down the affected fire protection system must be obtained from the proper authorities and all personnel who may be affected by this action must be notified. Absence of a Cover Plate may delay the sprinkler operation in a fire situation. When properly installed, there is an air gap between the lip of the Cover Plate and the ceiling. The Ordinary Tem- perature Cover Plate assembly has a nominal 1/8 in. (3,2 mm) air gap. The Intermediate Temperature Cover Plate has a nominal 3/32 (2,4 mm) air gap, as shown in Figure 2. This air gap is necessary for proper operation of the sprinkler by allowing heat flow from a fire to pass below and above the Cover Plate to help assure appropriate release of the Cover Plate in a fire situation. If the ceiling is to be repainted after the installation of the Sprinkler, care must be exercised to ensure that the new paint does not seal off any of the air gap. Factory painted Cover Plates must not be repainted. They should be replaced, if necessary, by factory painted units. Non -factory applied paint may adversely delay or prevent sprinkler operation in the event of a fire. Do not pull the Cover Plate relative to the Enclosure. Separation may result. Sprinklers which are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated, or otherwise altered after leaving the factory. Modi- fied or over heated sprinklers must be replaced. Care must be exercised to avoid damage before, during, and after instal- lation. Sprinklers damaged by drop- ping, striking, wrench twist/slippage, or the like, must be replaced. The owner is responsible for the inspection, testing, and maintenance of their fire protection system and devices in compliance with this document, as well as with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION, for example, NFPA 25, in addition to the standards of any other authorities having jurisdiction. Contact the installing contractor or product manufacturer with any questions. The owner must assure that the sprin- klers are not used for hanging any objects and that the sprinklers are only cleaned by means of gently dusting with a feather duster; otherwise, non - operation in the event of a fire or inad- vertent operation may result. Automatic sprinkler systems should be inspected, tested, and maintained by a qualified Inspection Service in accor- dance with local requirements and/or national codes. Limited Warranty For warranty terms and conditions, visit www.tyco-fire.com. Ordering Procedure Contact your local distributor for avail- ability. When placing an order, indicate the full product name and part number (P/N). Sprinkler Assemblies Specify: Series LFII (TY3596) 4.91K Res- idential Concealed Pendent Sprinkler, P/N (specify): 160'F(71°C) ...................51-112-1-160 212°F(100°C)..................51-112-1-212 Note: Sprinkler and Cover Plates are separately sold. See below for Cover Plate ordering information. Cover Plate Assemblies Specify: LFII Concealed Sprinkler Cover Plate Assembly, temperature rating (specify), (specify) finish, P/N (specify): 139'F(59°C) Ivory (RAU 015) ............... 56-204-0-135 Bright Chrome ................ 56-204-1-135 Beige (RAL1001) .............. 56-204-2-135 Pure White (RAL9010)* .........56-204-3-135 Signal White (RAL9003)** .......56-204-4-135 Grey White (RAL9002).......... 56-204-5-135 Brown(RAL8028)..............56-204-6-135 Black (RAL9005) .............. 56-204-7-135 Brushed Brass ................56-204-8-135 Brushed Chrome ..............56-204-9-135 Custom Paint .................56-204-X-135 165°F (74°C) Ivory (RAU 015) ............... 56-204-0-165 Bright Chrome ................ 56-204-1 165 Beige (RAL1001) ..............56-204-2-165 Pure White (RAL9010)* .........56-204-3-165 Signal White (RAL9003)'* .......56-204-4-165 Grey White (RAL9002).......... 56-204-5-165 Brown(RAL8028)..............56-204-6-165 Black (RAL9005) .............. 56-204-7-165 Brushed Brass ................56-204-8-165 Brushed Chrome ..............56-204-9-165 Custom Paint .................56-204-X-165 'Eastern Hemisphere sales only "Previously known as Bright White Note: All Custom Cover Plates are painted using SHERWIN-WILLIAMS Interior Latex Paint. Contact Johnson Controls Customer Service with any questions related to custom orders. Sprinkler Wrench Specify: W-Type 18 Sprinkler Wrench, P/N 56-000-1-265 TFP442 Page 6 of 6 1400 Pennbrook Parkway, Lansdale, PA 19446 1 Telephone A-215-362-0700 02019 Johnson Controls. All rights reserved. All specifications and other Information shown were current as of document revision date and are subject to change without notice. Johnson 400 NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association; Controls TEFLON is a registered trademark of DuPont; SHERWIN-WILLIAMS is a registered trademark of SWIMC LLC RE: REQUEST STATIC PRESSURE FOR 53739 VIA PALACIO IN THE HIDEAWAY la Quintal ca 0 David McGee <DMcGee@cvwd.org> `j Reply To Nick Domnick From: Nick Dom nick <nick0ndfireprotection.com Sent: Wednesday, March 30, 2022 3:22 PM To: David McGee<DMcGee(@cvwd.org.> Subject: Re: REQU EST STATI C PRESSU RE FOR 59799 VIA PALACI01 N THE HI DEAWAY la Quinta, ca (E)dernal e-mail: Do not click on links or open attachments unless you recognize the sender and you know the content is safe. The pressure here is 110 psi at 4 ft above finish grade Sent from my Phone On Mar 80, 2022, at 9:18 PM, David McGee <DMcGeeOcvwd.org- wrote: Nick, This address is a different pressure zone than the one you gave metoday, That's why it's so much lower. Thanks, David McGee Development Services Ext-3537 From: David McGee CAL FIRE - RIVERSIDE UNIT RIVERSIDE COUNTY FIRE DEPARTMENT OFFICE OF THE FIRE MARSHAL — LA QUINTA CALIFORNIA 78495 Calle Tampico, La Quinta, CA 92253 • Phone (760) 777-7074 • www.rvcfire.org June 16, 2022 Nick Domnick Fire Protection 16224 Space Drive Moreno Valley, CA 92551 Re: Residential Fire Sprinkler Plan Review — HIDEAWAY LOT 225 FSS2022-0069 / 53739 VIA PALACIO, LA QUINTA, CA 92253 The sprinkler plans you submitted for the above referenced project have been reviewed by Riverside County Fire Department - Office of the Fire Marshal personnel and are approved with the following conditions. Permanently marked identification signs shall be attached to all control valves. The following inspections/tests are required to be witnessed by Office of the Fire Marshal Staff: (a) Overhead Rough and Hydro static test: All piping shall be visible and pumped at normal operating pressure. *No jacketed electrical and data wiring shall be in contact with, nor have the potential to contact CPVC piping once insulation is installed. (b) Final inspection The Fire Department approved plans and conditions letter must be at the job site. Applicant/installer shall be responsible to contact the Fire Department to schedule inspections. Requests for inspections are to be made at least 48 hours in advance and may be arranged by calling (760)777-7131. All questions regarding the meaning of these conditions should be referred to the Office of the Fire Marshal staff at (760)777-7074. Kohl Hetrick - Fire Safety Specialist i6RIVERSIDE COUNTY FIRE PROTECTION PLANNING RECORD OF INSPECTIONS / PERMIT CARD al�Cv ,uGKCv THIS CARD IS TO REMAIN ON SITE AT ALL TIMES.—CALIFORNIA— INSTALLING CONTRACTOR MUST BE PRESENT FOR ALL INSPECTIONS. SEE NOTES ON REVERSE SIDE. JOB ADDRESS: 53739 VIA PALACIO PERMIT#: FSS2022-0069 AT ED: 6/16/2022 DESCRIPTION: HIDEAWAY LOT 225 CONTRACTOR: NICK DOMNICK FIRE PROTECTION HYDRANT SYSTEM DATE INITIALS SPECIAL SUPPRESSION DATE INITIALS Thrust block pre -pour Door fan test UG rough piping Abort test UG hydro Mechanical shutdown Flush Detector test Final IF Deluge/pre-action SPRINKLER U.G. Final IF Thrust block pre -pour UST/AST TANK UG rough piping Installation UG hydro Removal Flush Emergency shut off Final IF Primary piping FIRE SPRINKLER Secondary piping Weld inspection Dispensers & shear valves Overhead rough piping Final IF Overhead hydro MISC. INSPECTIONS UG flush / OK to connect Spray booths Main drain/inspectors' test Hood/duct extinguishing High pile storage High pile rack storage In -rack sprinklers H.P. vents/access/corridors Hose racks Tract access/hydrant verification Final E F Access & Address verification HOOD EXTINGUISHING OTHER CONST. PERMIT Detection system Function test Gas/electrical shut-off Nozzle model/placement Fire alarm connection Final e F SPRAY BOOTHS FIRE CODE PERMIT(S) Installation Air flow test Mechanical interlock Extinguishing system Fire alarm connection Final e F FIRE ALARM KNOX SYSTEM Rough -wire inspection Building Knox box Function test Gate access Knox box/padlock Duct detectors/velocity BUILDING INSPECTIONS 24 hr. battery test T/I final Sprinkler monitoring Shell final Final E F Final for occupancy FINAL INSPECTION DATE: INSPECTORS SIGNATURE: **WHEN CALLING FOR AN INSPECTION PLEASE HAVE PERMIT NUMBER READY. SEE NOTES ON REVERSE SIDE- 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 INSPECTION NOTES 1. Sway bracing and hangers will be inspected at the time of rough piping inspection. 2. All required hydrostatic pressure tests shall maintain 200 psi for a 2-hour duration. (EX: Residential Fire Sprinkler Systems) 3. Fire sprinkler system remodels: if indicated on plans or this card, a hydrostatic pressure test shall be required. 4. All underground joints and thrusts blocks shall be exposed and readily visible during the hydrostatic test. 5. Contractor shall supply all testing equipment, access and operating instructions at time of test. 6. All systems shall be inspected, tested, and approved by a Fire Inspector before any work is started that may cause the affected system to be covered or hidden. POLICIES ON FIELD INSPECTIONS A. INSPECTION REQUESTS: Inspections are made subject to availability. Please have the permit number available when scheduling inspections. For City of La Quinta inspections call: (760) 777-7131. B. APPROVED PLANS: Shall be kept on the job site at all times that work is in progress. Work shall NOT commence without approved plans. C. INSPECTION REQUESTS: As required by the California Fire Code, the appropriate installing contractor shall be required to schedule the necessary inspections and be present on site for inspections. D. RE -INSPECTIONS: Will be charged against a permit when an inspection has failed, is not ready, the responsible party not on site or where previously noted corrections have not been completed. E. COMMODITIES: Unless otherwise noted on approved plans or letter of conditions, no commodities shall be entered into the structure until clearance has been granted by the Fire Dept and Building Official. F. OCCUPANCY: Buildings shall NOT be occupied by persons other than construction workers until a Final Fire Clearance has been granted by the Fire Dept and a Certificate for Occupancy has been issued by the Building Official. INSPECTION NOTES: THIS CARD IS REQURIED TO BE POSTED AT THE CONSTRUCTION SITE. THIS CARD AND APPROVED PLANS MUST BE AVAILABLE AT THE CONSTRUCTION SITE FOR ALL INSPECTIONS. THIS PERMIT SHALL EXPIRE AND BECOME NULL AND VOID IF THE WORK AUTHORIZED IS NOT COMMENCED WITHIN 180 DAYS OR IF THE WORK IS SUSPENDED OR ABANDONED FOR A PERIOD OF 180 DAYS OR MORE. THIS PERMIT IS FOR FIRE DEPARTMENT APPROVAL ONLY AND DOES NOT INTEND TO ABROGATE MORE RESTRICTIVE REQUIREMENTS OF OTHER AGENCIES HAVING RESPONSIBILITY. 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 Nicholas Domnick Fire Protection 16224 Space Drive Moreno Valley, CA 92551 To whom it may concern, Please extend my permit for Ballard Residence 53739 Via Palacio. This project is taking longer than expected but is now ready for final. 951-807-1347