Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
FSS2022-0177
ADDITIONAL SITES CHRONOLOGY CHRONOLOGY TYPE STAFF NAME ACTION DATE COMPLETION DATE NOTES NOTE JOSE DELGADO 1/19/2023 1/23/2023 CONTRACTOR REQUESTED FINAL INSPECTION. PERMIT EXPIRED AS OF 1/16/23 (6 MOS FROM DATE OF LAST APPROVED INSPECTION). ADDED EXTENSION FEE OF $88 AND EXTENDED PERMIT TO 1/20/23 SO CONTRACTOR CAN PAY FEE VIA ETRAKIT. CONTRACTOR PROVIDED WITH EXTENSION REQUEST LETTER. OK TO EXTEND PER KOHL. FEES HAVE BEEN PAID AND CONTRACTOR PROVIDED EXTENSION REQUEST. EXTENDING PERMIT FOR ANOTHER 6 MONTHS. CONDITIONS Description: INSTALLATION OF NEW FIRE SPRINKLER SYSTEM Type: FIRE SPRINKLER (WEB)Subtype: RESIDENTIAL - CUSTOM HOMES Status: FINALED Applied: 4/19/2022 ECON Parcel No: 777400007 Site Address: 80705 VIA MONTECITO LA QUINTA,CA 92253 Approved: 7/5/2022 KHET Subdivision: TR 29894-4 Block: Lot: 61 Issued: 7/14/2022 ONLINE Lot Sq Ft: 0 Building Sq Ft: 0 Zoning: Finaled: 1/26/2023 LRO Valuation: $26,564.00 Occupancy Type: Construction Type: Expired: No. Buildings: 0 No. Stories: 0 No. Unites: 0 Details: Printed: Friday, April 07, 2023 8:38:59 AM 1 of 4 Permit Details City of La Quinta PERMIT NUMBER FSS2022-0177 CONTACTS NAME TYPE NAME ADDRESS1 CITY STATE ZIP PHONE FAX EMAIL APPLICANT Rubi Gutierrez 8085 E. Crystal Drive Anaheim CA 92807 (714)666-8450 engineering@resfire.co m CONTRACTOR RESIDENTIAL FIRE SYSTEMS INC 8085 E CRYSTAL DRIVE ANAHEIM CA 92807 (714)666-8450 engineering@resfire.co m OWNER Peter Marguglio and Linda trocki 53621 Via Dona La Quinta CA 92253 (714)666-8450 FINANCIAL INFORMATION DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE RECEIPT #CHECK #METHOD PAID BY CLTD BY FIRE FAILED OR ADDITIONAL FIELD INSPECTIONS (EXCESSIVE) EACH 101-0000-42421 0 $175.00 $175.00 1/20/23 WEB14112 800581556 CREDIT 786965 ECON FIRE PERMIT EXTENSION (ADMIN PROCESSING) 101-0000-42420 0 $88.00 $88.00 1/20/23 WEB14112 800581556 CREDIT 786965 ECON FIRE SPRINKLER SYSTEMS - SINGLE FAMILY DETACHED 101-0000-42421 0 $250.00 $250.00 7/14/22 WEB12492 668057704 CREDIT 786965 ECON FIRE SPRINKLER SYSTEMS - SINGLE FAMILY DETACHED PC 101-0000-42420 0 $250.00 $250.00 7/14/22 WEB12492 668057704 CREDIT 786965 ECON Total Paid for FIRE FEES: $763.00 $763.00 RECORDS MANAGEMENT FEE 101-0000-42416 0 $11.00 $11.00 7/14/22 WEB12492 668057704 CREDIT 786965 ECON Total Paid for RECORDS MANAGEMENT FEE: $11.00 $11.00 TECHNOLOGY ENHANCEMENT FEE 502-0000-43611 0 $5.00 $5.00 7/14/22 WEB12492 668057704 CREDIT 786965 ECON Total Paid for TECHNOLOGY ENHANCEMENT FEE: $5.00 $5.00 TOTALS:$779.00 $779.00 Printed: Friday, April 07, 2023 8:38:59 AM 2 of 4 Permit Details City of La Quinta PERMIT NUMBER FSS2022-0177 ATTACHMENTS Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED DOC 4/19/2022 Etrakit Contractor 1ST SUBMITTAL PLANS 14339 Marguglio Residence FSP-RG.pdf 1 BOND INFORMATION INSPECTIONS SEQID INSPECTION TYPE INSPECTOR SCHEDULED DATE COMPLETED DATE RESULT REMARKS NOTES OVERHEAD HYRO KHET 7/20/2022 7/20/2022 APPROVED OVERHEAD ROUGH PIPING KHET 7/20/2022 7/20/2022 APPROVED SEE NOTES Confirm 18-inch clearance from Smoke Detectors Confirm maximum 10-feet single head room spacing *Provide Revised Plans and Calcs prior to final for review and approval of as-built conditions. FIRE FINAL**LRO 1/18/2023 1/18/2023 DISAPPROVE D See Notes Too many paint patch ups being done throughout the home near sprinkler heads. FIRE FINAL**LRO 1/26/2023 1/26/2023 APPROVED REVIEWS REVIEW TYPE REVIEWER SENT DATE DUE DATE RETURNED DATE STATUS REMARKS NOTES 1ST FIRE - ETRAKIT (2 WK) KOHL HETRICK 4/19/2022 5/3/2022 5/18/2022 REVISIONS REQUIRED SEE ATTACHMENTS 1ST PERMIT TECH – ETRAKIT (1 DAY) PERMIT TECH BUCKET 4/19/2022 4/20/2022 4/22/2022 COMPLETE 2ND FIRE (1 WK)KOHL HETRICK 6/2/2022 6/9/2022 7/5/2022 APPROVED SEE ATTACHMENTS PARENT PROJECTS Printed: Friday, April 07, 2023 8:38:59 AM 3 of 4 Permit Details City of La Quinta PERMIT NUMBER FSS2022-0177 ATTACHMENTS Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED DOC 4/19/2022 Etrakit Contractor 1ST SUBMITTAL HYDRAULIC CALCS Calcs.pdf 1 DOC 4/19/2022 Etrakit Contractor 1ST SUBMITTAL SRINKLER SPECS Specs.pdf 1 DOC 6/2/2022 Etrakit Contractor Delta 1 Plans 14339 Marguglio Residence FSP-RG Delta 1.pdf 1 DOC 6/2/2022 Etrakit Contractor Delta 1 Hydraulic Calculations Calcs Delta 1.pdf 1 DOC 1/19/2023 JOSE DELGADO FSS 2022-0177 Extension request Letterhead.doc Letterhead.doc 0 DOC 5/18/2022 KOHL HETRICK FSS2022-0177 - FIRE PLAN CORRECTIONS.pdf FSS2022-0177 - FIRE PLAN CORRECTIONS.pdf 1 DOC 7/5/2022 KOHL HETRICK FSS2022-0177 - APPROVED PLANS AND CALCS.pdf FSS2022-0177 - APPROVED PLANS AND CALCS.pdf 1 DOC 7/5/2022 KOHL HETRICK FSS2022-0177 - COA AND JOB CARD.pdf FSS2022-0177 - COA AND JOB CARD.pdf 1 DOC 7/20/2022 KOHL HETRICK FSS2022-0177 - 7-20- 2022 Insp Notes.pdf FSS2022-0177 - 7-20- 2022 Insp Notes.pdf 1 DOC 2/14/2023 KOHL HETRICK FSS2022-0177 - AS- BUILTS AND CALCS APPROVED.pdf FSS2022-0177 - AS- BUILTS AND CALCS APPROVED.pdf 1 Printed: Friday, April 07, 2023 8:38:59 AM 4 of 4 Permit Details City of La Quinta PERMIT NUMBER FSS2022-0177 RESIDENTIALfire systems inc.09.09.1643251NOT TO SCALETEK TYPE SCREWS TYP.OFFSET STRAP TYP.3/4" THRU 2" PIPE3/4" THRU 3" PIPEDOUBLEFASTNER STRAP TYP.SIDE MOUNTEDDOUBLE FASTENER STRAP TYP.3/4" THRU 2" PIPE***MOUNTING POSITION - TOP & BOTTOMSEE BELOW.PIPE SIZE* MOUNTING POSITION - TOP, BOTTOM OR SIDE U.N.O.* 1/4" TEK TYPE SCEWS PROVIDED.INSTALLATION08.21.2005.12.2108.18.1608.18.1612"x_WOOD BLOCK TYP.1/2" OR 3/8" GYP.BOARD TYP.FIRESPRINKLERBRANCH LINE TYP.6" MAX.TYP.STRAP/RESTRAINTTYP.SCREW (W/ BACKINGNUT AT TJIs ONLY)MAIN LINE TYP.JOIST FLOOR FRAMINGSCREW TJI JOISTTJI FLOOR FRAMING09.22.21xxxxxxx08.18.166" MIN.12" MIN.12" MIN.6" MIN.12" MIN.12" MIN.BATTINSULATION(TYPICAL)SPRINKLERPIPE ON TOP OF BOTTOM CHORD OF ROOF TRUSS/CEILING JOIST UNDER BATT INSULATION WITHIN ATTIC TYPICALCEILINGATTICINTERIORSPACECEILINGSPRINKLER BELOWCEILINGPIPEPIPE ON TOP OF BOTTOM CHORD OFROOF TRUSS/ CEILING JOIST UNDER BATTINSULATION WITHIN ATTIC TYPICALBATTINSULATION (TYPICAL)03.23.21FROM FIRE SPRINKLER SYSTEM2'-0" MIN.FIN. FLR.INSPECTOR TEST SIGN1/2" KEYLESS HOSE BIB08.18.1610.17.1810.04.16TOLCO 2" MAX. FIRE SPRINKLER PIPECPVC, COPPER, OR STEEL (SEE PLANS)RING HANGER1/2" MAX.SAMMY #GST 20 (1/4"x2")ORDEWALT PFM2251100 (1/4"x2")(PRE-DRILL @ MID. OF BM.)NOTE: WOOD ANCHOR MUST EXTENDMINIMUM 3/16" ABV. TOP OF BOT. FLANGEMAXIMUM HANGERSPACING PERNFPA 13 (SEE PLANS)3/16" MIN.3/8" ALL THREAD ROD2x_WOOD JOISTTJIEQ.EQ.2" MIN.12.22.21SURGE RESTRAINER09.28.16TYPICAL - 05.12.2105.06.1908.18.1608.24.16ROOF TRUSS OR RAFTERSTRAP/RESTRAINTBRANCH LINEMAIN LINE1/2" OR 3/8" GYP. BOARD TYP.WOOD TRUSS6" MAX.OR JOISTFIRE SPRINKLER08.14.20(FLAT OR SLOPED: SEE PLANS)09.29.211/2" OR 3/8" GYP.BOARD TYP.FIRESPRINKLERBRANCH LINE TYP.TEESTRAP/RESTRAINTTYP.SIDE MOUNTDOUBLEFASTENERSTRAP/RESTRAINTSOLID JOIST ORTJI FLOOR FRAMING09.22.21SOLID JOIST ORTJI FLOOR FRAMINGSCREW (W/ BACKINGNUT AT TJIs ONLY)CAPSCREW (W/ BACKINGNUT AT TJIs ONLY)05.11.216"6"1'-0"MIN. DIST. FROM EDGE OFHOLE TO INSIDE FACE OFNEAREST END SUPPORT2 x D1 MIN.(EXCEPT KNOCKOUTS)D16"6"6"2 x L1 MIN.(EXCEPT KNOCKOUTS)L12'-0"MIN. DIST. FROM EDGE OFHOLE TO INSIDE FACE OFNEAREST INTERMEDIATEOR CANTILEVER SUPPORT1-1/2"Ø HOLES MY BE CUT ANYWHERE OUTSIDE OFHATCHED ZONE IF THEY ARE LOCATED 3" AWAYHORIZONTALLY (EDGE TO EDGE) FROM A LARGER HOLENO FIELD CUT HOLES INHATCHED ZONES TYP.06.24.21#04.23.1910.17.18PROJECT SITESR-41" WATER METER ( FIELD VERIFICATIONNEEDED AT ROUGH INSTALLATION )(-3 PSI INCLUDED IN CALCS)TRFSFS110BRU2-252U12PVC TO COPPER ADAPTERDOMESTIC SHUT OFF VALVE(IF REQUIRED)TO DOMESTIC WATER SUPPLYTO IRRIGATION(W/ IN-LINE CHECK VALVE)1/2" PRESSURE RELIEF VALVE SET AT 175 PSITO FIRE SPRINKLERSYSTEM, SEE PLANSPOINT OF CONNECTION FORRESIDENTIAL FIRE SYSTEMS, INC.1" CPVC RUBBER FACED CHECK VALVEFLOW SWITCH(-3 PSI INCLUDED IN CALCS)300 PSI PRESSURE GAUGETO 1/2" BALL VALVE / DRAIN LINEFIRE SPRINKLER RISERW/ INTERIOR ACCESSPANEL (14-1/2"x24") TYP.1" CPVC1" COPPER K2" PVC40'-0"140'-0"1" COPPER L1" COPPER MEXTERIOR BELL (INSTALLED/WIRING BY OTHERS)M-2M1**SEE FS-02 FOR RCCE1/14/2023 10:17:55 AM, RubiG, OK TO INSTALL,REVISIONS NOT APPROVEDAPPROVEDRiverside County Fire DepartmentLa Quinta Office of the Fire MarshalBy:FIRE SAFETY SPECIALIST02/14/2023 4:05:28 PMThe approval of plans and specifications does notpermit the violation, deletion, omission or faultyinstallation of any requirements of Title 24 or anyLocal Ordinances. Construction shall remainaccessible and exposed for inspection purposesuntil approved by the Fire Department.PERMIT # -FSS2022-0177 - AS BUILTSKohl HetrickReason: I am approving this documentContact Info: 760-409-5109 PROPERTY LINE PROPERTY LINE SpaVIA MONTECITOPoolEXISTING WATER MAIN1" WATER METER1-1/2"WATER SERVICE40'-0"TRU2U3U4SRCELEV: -4ELEV: -2ELEV: 10ELEV: -2PROPOSED FIRE BELL LOCATIONPROPOSED FIRE RISER LOCATION2" PVC140'-0"MARGUGLIO RESIDENCE80705 VIA MONTECITO, LA QUINTALOT 61INSP. TESTPROPOSED REMOTEINSPECTOR'S TESTRESIDENTIALfire systems inc.09.09.1643251SCALE:SITE PLAN1/8" = 1'-0"09.28.1608.18.16SR-41" WATER METER ( FIELD VERIFICATIONNEEDED AT ROUGH INSTALLATION )(-3 PSI INCLUDED IN CALCS)TRFSFS110BRU2-252U12PVC TO COPPER ADAPTERDOMESTIC SHUT OFF VALVE(IF REQUIRED)TO DOMESTIC WATER SUPPLYTO IRRIGATION(W/ IN-LINE CHECK VALVE)1/2" PRESSURE RELIEF VALVE SET AT 175 PSITO FIRE SPRINKLERSYSTEM, SEE PLANSPOINT OF CONNECTION FORRESIDENTIAL FIRE SYSTEMS, INC.1" CPVC RUBBER FACED CHECK VALVEFLOW SWITCH(-3 PSI INCLUDED IN CALCS)300 PSI PRESSURE GAUGETO 1/2" BALL VALVE / DRAIN LINEFIRE SPRINKLER RISERW/ INTERIOR ACCESSPANEL (14-1/2"x24") TYP.1" CPVC1" COPPER K2" PVC40'-0"140'-0"1" COPPER L 1" COPPER MEXTERIOR BELL (INSTALLED/WIRING BY OTHERS)M-2M11/14/2023 10:18:00 AM, RubiG, OK TO INSTALL,REVISIONS NOT APPROVED LinenLOW WALL10'-0" CLG.10'-0" CLG.17'-0" CLG.14'-0" CLG.14'-0" CLG.14'-0" CLG.10'-0" CLG.12'-0" CLG.12'-0" CLG.10'-0" CLG.10'-0" CLG.10'-1" CLG.10'-0" CLG.8'-0" CLG.10'-0" CLG.10'-0" CLG.10"x10" EXPOSED FLAT BEAMS (TYP.)10'-0" CLG.10"x10" BEAM10"x10" BEAM10"x10" BEAM10"x10" BEAM10'-0" CLG.ENTRY COURTYARDOPEN TO SKY BATH 110'-0" CLG.62 ft²GALLERY 110'-0" CLG. WINE ROOM23 ft²FOYER10'-0" CLG. POWDER10'-0" CLG.58 ft²HER CLOSET10'-0" CLG.201 ft²HIS CLOSET10'-0" CLG.78 ft²OWNER'S SUITE15'-0" CLG.T&G TYP.OWNER'S BATHROOM10'-0" CLG.347 ft²LAUNDRY9'-0" CLG.175 ft²GALLERY 210'-0" CLG. BATH 210'-0" CLG.47 ft²GUEST SUITEBEDROOM 110'-8" CLG. 66 ft³GUEST SUITELIVING10'-0" CLG. GUEST SUITEBATH 110'-0" CLG.110 ft²ENTRY GATEOPEN TO EXTERIOR10'-1" CLG.GARAGE 210'-0" CLG. GARAGE 110'-0" CLG. MECH 110'-0" CLG.30 ft²BULTER'SKITCHEN10'-0" CLG. KITCHEN12'-0" CLG. OFFICEBATH #210'-0" CLG.135 ft²OFFICE 213'-6" CLG. NOOK12'-0" CLG. WET BAR12'-0" CLG. DINING15'-0" CLG. GREAT ROOM14'-0" CLG. LOGGIA #2OPEN TO EXTERIOR15'-0" CLG.LOGGIA 1OPEN TO EXTERIOR12'-0" CLG.MECH 29'-0" CLG.30 ft²ELEC.10'-0"13 ft²CLOSET10'-0" CLG.26 ft²SITTING12'-0" CLG. SSSSCSCSCSCSCSSSSJGSJGCLOSET10'-0" CLG.43 ft²BEDROOM 110'-8" CLG.61.4 ft³Drapery PocketDrapery PocketMEDIA ROOM10'-8" CLG.89.1 ft³BUILT-INDrapery PocketDrapery PocketT&GOFFICE #19'-2" CLG.T&G10'-0" CLG.AUDIO/VIDEO10'-0 CLG.19 ft²1 ft²SKYLIGHT25 ft³SKYLIGHT25 ft³SKYLIGHT25 ft³HEAT ZONE 28 ft²37.14 ft³37.14 ft³37.14 ft³Drapery PocketDPDrapery PocketDrapery Pocket12'-0" CLG. OPEN TO EXTERIOROVERHANG12'-0" CLG. OPEN TO EXTERIORFIR E P L A C E FIR E P L A C E HE A T Z O N E Screen PocketDrapery PocketDrapery Pocket12'-0" CLG.8X 8 G Y P . B O A R D14'-0" CLG.17'-0" CLG.10'-0" CLG.9 ft³9 ft³9 ft³9 ft³9 ft³9 ft³9 ft³9 ft³9 ft³Drapery PocketDrapery PocketDrapery PocketDrapery PocketD.p.Drapery PocketD.p.10'-6" CLG.23.5 ft³T&G8'-0"10'-0" CLG.24 ft²10'-0" CLG.19 ft²10'-0" CLG.18 ft²10'-0" CLG.8'-0" CLG.SKYLIGHT18 ft³FIRE PLACE HEAT ZONEJ Drapery Pocket1 ft²JSKYLIGHT18 ft³1 ft²D.p.10'-0" CLG.50 ft²CLOSET10'-0" CLG.31 ft²CLOSET10'-0" CLG.30 ft²D.p.D.p.RN8"RN2'RN3'-6"RN10"RN1'-6"RN3'RN5'RN1'RN1'RN1'GUEST SUITEBEDROOM 211'-0" CLG.95 ft³RN1'RN5'12345677'-0"89101112TR13RN7'6'-3"11'-0"8'-3"5'-10"14'-9"3'-4"15'-3"13'-6"3'-0"1'-10"11'-1"4'-1" 9'-0" 7'-2"3'-3"4'-7"3'-1"7'-7"5'-11"4'-5"12'-0"6'-11"79.7 ft³7'-6"7'-6"2.5 ft²6'-6"11'-2"1'-2"8'-10"5'-2"6'-4"2'-6"DFS-03DFS-035'-10"8'-0"6'-8"4'-5"2'-10"7'-6"2'-0"4'-6"2'-0" 8'-0"8'-8"10'-0"5'-7"3'-6"5'-8"2'-4"3'-7"3'-2"1'-0"14'-4"1'-2"6'-0"6'-0"6'-2"2'-0"1'-0"10'-10"1'-2"7'-3"7'-3"5'-6"2'-11"7'-9"6'-0"7'-9"10'-0"9'-0"2'-0"3'-10"9'-0"13'-2"9'-0"5'-0"2'-6" 6'-0"8'-0"2'-6"2'-6"5'-7"4'-0"7'-3"5'-5"5'-5"16'-0"4'-3"6'-10"6'-9"4'-10"14'-1"4'-5"7'-3"12'-3"15'-6"8'-6"7'-10"7'-11"0'-6"1'-6"2'-0"9'-11"6'-3" 3'-5"4'-10"4'-0 "5'-10"2'-1"8'-11"3'-5 " 1'-0 "7'-1"2'-4"1'-2"2'-5 "3'-9"9'-0 "4'-6"1'-9"11'-6"5'-0"3'-6"9'-1"4'-2" 8'-2"6'-3"9'-10"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1" 1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1" 1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1"1" 1"1"1"1" 1" 1" 1" 1" 7'-6 " 7'-6 "INSP. TEST9'-0"6'-11"7'-2"1'-5"RN9'-5" 9'-7"8'-7"8'-4 "3'-7"11'-1"3 ft²2'-0"4'- 7 "1"RN3'7'-3 "5'-4"2'-0"5'-6"2'-0"4'-3"2'-0"RN1'RN1'1'-0"1'-0"0'-8"0'-8"7'-11"7'-11"FFS-0315'-0" CLG.1"1"1"1"1"1"1"4B144ARN5'RN5'223'-5"15'-6"1"1"1"1"1"1"1"1" 1" 1" 1"1"1" 1" 3'-10"2'-2"21" 1"1"222FAUFAUEntry CourtyardWDOpen To KitchenOpen To KitchenMEDIA ROOM10'-0" CLG. MECH #110'-0" CLG. OFFICE #112'-0" CLG. LAUNDRY10'-0" CLG. MECH #210'-0" CLG. RESIDENTIALfire systems inc.09.09.16432511ST FLR. AREA:TOTAL AREA:GARAGE AREA:sqft.sqft.sqft.OBSTRUCTIONDABOBSTRUCTIONCLG.BABCLG.WALLABA08.18.16FIRE SPRINKLER PLAN (NFPA 13D) NOTES:- ALL COMPARTMENTS WITH 1 RESIDENTIAL HEAD TO BE SPACED @ MAX. ALL COMPARTMENTS WITH 2 OR MORE RESIDENTIAL HEADS TO BE SPACED @ MAX.- ALL PIPING TO BE CPVC PIPE U.N.O.- ALL DROPS TO HEADS TO BE CPVC PIPE3/4"3/4"20'x20'18'x18'#04.23.19SCALE:SECTION D1/8" = 1'-0"SCALE:FLOOR PLAN3/16" = 1'-0"SCALE:SECTION F1/8" = 1'-0"1/14/2023 10:18:04 AM, RubiG, OK TO INSTALL,REVISIONS NOT APPROVED RESIDENTIAL FIRE SYSTEMS, INC. 8085 EAST CRYSTAL DRIVE ANAHEIM, CA. 92807 HYDRAULIC CALCULATIONS FOR MARGUGLIO RESIDENCE 2HD CALC AT OWNER’S SUITE FILE NUMBER: 14339 DATE: JAN 14, 2023 -DESIGN DATA- OCCUPANCY CLASSIFICATION: NFPA 13D, 2016 EDITION DENSITY: 0.05 gpm/sq. ft. AREA OF APPLICATION: 648.0 sq. ft. COVERAGE PER SPRINKLER: 324.0 sq. ft. max. NUMBER OF SPRINKLERS CALCULATED: 2 sprinklers TOTAL SPRINKLER WATER FLOW REQUIRED: 37.2 gpm TOTAL WATER REQUIRED (including hose): 42.2 gpm FLOW AND PRESSURE (@ BOR): 37.2 gpm @ 44.2 psi REQUIRED PRESSURE (@ SRC): 64.4 psi SPRINKLER ORIFICE SIZE: 1/2 inch NAME OF CONTRACTOR: RESIDENTIAL FIRE SYSTEMS, INC DESIGN/LAYOUT BY: RUBI G. AUTHORITY HAVING JURISDICTION: R.C.F.D./ CITY OF LA QUINTA CONTRACTOR CERTIFICATION NUMBER: 786965 CALCULATIONS BY HASS COMPUTER PROGRAM , SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 2DATE: 1/14/2023ENCE, LA QUINTA\FIRE SPRINKLERS\CALCS\DELTA 2\2HD CALC.SDFJOB TITLE: WATER SUPPLY DATA SOURCE STATIC RESID. FLOW AVAIL. TOTAL REQ’D NODE PRESS. PRESS. @ PRESS. @ DEMAND PRESS. TAG (PSI) (PSI) (GPM) (PSI) (GPM) (PSI) SRC 97.8 20.0 600.0 97.3 42.2 64.4 AGGREGATE FLOW ANALYSIS: TOTAL FLOW AT SOURCE 42.2 GPMTOTAL HOSE STREAM ALLOWANCE AT SOURCE 0.0 GPMOTHER HOSE STREAM ALLOWANCES 5.0 GPMTOTAL DISCHARGE FROM ACTIVE SPRINKLERS 37.2 GPM NODE ANALYSIS DATANODE TAG ELEVATION NODE TYPE PRESSURE DISCHARGE (FT) (PSI) (GPM) 1 17.0 K= 5.80 8.6 17.02 17.0 - - - - 11.1 - - -3 12.0 - - - - 13.4 - - -4 12.0 K= 5.80 12.1 20.24A 12.0 - - - - 14.7 - - -4B 10.0 - - - - 20.2 - - -5 10.0 - - - - 21.7 - - -6 10.0 - - - - 21.7 - - -7 10.0 - - - - 22.9 - - -8 10.0 - - - - 25.0 - - -9 10.0 - - - - 28.0 - - -10 10.0 - - - - 25.6 - - -11 10.0 - - - - 30.5 - - -12 10.0 - - - - 27.6 - - -13 12.0 - - - - 22.4 - - -14 0.0 - - - - 25.1 - - -TR 10.0 - - - - 32.6 - - -FS 5.0 - - - - 37.1 - - -FS1 5.0 - - - - 40.1 - - -BR 2.0 - - - - 44.2 - - -U1 2.0 HOSE STREAM 45.8 5.0U2 -2.0 - - - - 53.7 - - -U3 -2.0 - - - - 56.3 - - -U4 -2.0 - - - - 59.3 - - -SRC -4.0 SOURCE 64.4 42.2 SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 3DATE: 1/14/2023ENCE, LA QUINTA\FIRE SPRINKLERS\CALCS\DELTA 2\2HD CALC.SDFJOB TITLE: PIPE DATA PIPE TAG Q(GPM) DIA(IN) LENGTH PRESS. END ELEV. NOZ. PT DISC. VEL(FPS) HW(C) (FT) SUM. NODES (FT) (K) (PSI) (GPM) FL/FT (PSI) Pipe: 1 -17.0 0.874 PL 10.08 PF 2.51 17.0 5.8 8.6 17.0 9.1 150 FTG 2FE PE 0.02 17.0 0.0 11.1 0.0 0.155 TL 16.08 PV Pipe: 2 -5.2 1.101 PL 13.50 PF 0.22 17.0 0.0 11.1 0.0 1.7 150 FTG 2F2ETR PE 2.23 12.0 0.0 13.4 0.0 0.006 TL 31.50 PV Pipe: 3 20.2 0.874 PL 1.00 PF 1.33 12.0 0.0 13.4 0.0 10.8 150 FTG ER PE 0.04 12.0 5.8 12.1 20.2 0.214 TL 6.00 PV Pipe: 3A -25.4 1.101 PL 6.50 PF 1.33 12.0 0.0 13.4 0.0 8.6 150 FTG FT PE 0.04A 12.0 0.0 14.7 0.0 0.106 TL 12.50 PV Pipe: 3B 11.8 1.101 PL 28.00 PF 1.54A 12.0 0.0 14.7 0.0 4.0 150 FTG 4F4ETR PE -2.22 17.0 0.0 11.1 0.0 0.026 TL 58.00 PV Pipe: 3C -37.2 1.101 PL 8.33 PF 4.64A 12.0 0.0 14.7 0.0 12.5 150 FTG F2E2R PE 0.94B 10.0 0.0 20.2 0.0 0.215 TL 21.33 PV Pipe: 4 -24.3 1.101 PL 10.08 PF 1.54B 10.0 0.0 20.2 0.0 8.2 150 FTG 2F3R PE 0.05 10.0 0.0 21.7 0.0 0.098 TL 15.08 PV Pipe: 5 0.0 0.874 PL 7.50 PF 0.05 10.0 0.0 21.7 0.0 0.0 150 FTG FETR PE 0.06 10.0 0.0 21.7 0.0 0.000 TL 16.50 PV Pipe: 6 -24.3 1.101 PL 10.66 PF 1.25 10.0 0.0 21.7 0.0 8.2 150 FTG FR PE 0.07 10.0 0.0 22.9 0.0 0.098 TL 12.66 PV Pipe: 7 -10.5 1.101 PL 56.75 PF 2.17 10.0 0.0 22.9 0.0 3.5 150 FTG 8F6E9R PE 0.08 10.0 0.0 25.0 0.0 0.020 TL 103.75 PV Pipe: 8 -10.5 1.101 PL 91.00 PF 3.08 10.0 0.0 25.0 0.0 3.5 150 FTG 9F7ET6R PE 0.09 10.0 0.0 28.0 0.0 0.020 TL 146.00 PV Pipe: 9 13.9 1.101 PL 42.16 PF 2.49 10.0 0.0 28.0 0.0 4.7 150 FTG 6F2ET6R PE 0.010 10.0 0.0 25.6 0.0 0.035 TL 69.16 PV SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 4DATE: 1/14/2023ENCE, LA QUINTA\FIRE SPRINKLERS\CALCS\DELTA 2\2HD CALC.SDFJOB TITLE: PIPE TAG Q(GPM) DIA(IN) LENGTH PRESS. END ELEV. NOZ. PT DISC. VEL(FPS) HW(C) (FT) SUM. NODES (FT) (K) (PSI) (GPM) FL/FT (PSI) Pipe: 10 13.9 1.101 PL 51.00 PF 2.710 10.0 0.0 25.6 0.0 4.7 150 FTG 6F2ET7R PE 0.07 10.0 0.0 22.9 0.0 0.035 TL 79.00 PV Pipe: 11 -24.3 1.101 PL 21.75 PF 2.59 10.0 0.0 28.0 0.0 8.2 150 FTG 2F2R PE 0.011 10.0 0.0 30.5 0.0 0.098 TL 25.75 PV Pipe: 12 12.9 1.101 PL 65.00 PF 2.911 10.0 0.0 30.5 0.0 4.3 150 FTG 9F2ET7R PE 0.012 10.0 0.0 27.6 0.0 0.030 TL 96.00 PV Pipe: 13 12.9 1.101 PL 84.50 PF 4.412 10.0 0.0 27.6 0.0 4.3 150 FTG F8E3T5R PE -0.913 12.0 0.0 22.4 0.0 0.030 TL 145.50 PV Pipe: 14 12.9 1.101 PL 46.00 PF 2.513 12.0 0.0 22.4 0.0 4.3 150 FTG 6F5E5R PE 5.214 0.0 0.0 25.1 0.0 0.030 TL 82.00 PV Pipe: 14A 12.9 1.101 PL 12.50 PF 0.614 0.0 0.0 25.1 0.0 4.3 150 FTG 2FT PE -4.34B 10.0 0.0 20.2 0.0 0.030 TL 19.50 PV Pipe: 15 -37.2 1.101 PL 8.66 PF 2.111 10.0 0.0 30.5 0.0 12.5 150 FTG R PE 0.0TR 10.0 0.0 32.6 0.0 0.215 TL 9.66 PV Pipe: 100 -37.2 1.101 PL 5.00 PF 2.4TR 10.0 0.0 32.6 0.0 12.5 150 FTG ER PE 2.2FS 5.0 0.0 37.1 0.0 0.215 TL 11.00 PV Pipe: 101 FIXED PRESSURE LOSS DEVICEFS1 5.0 0.0 40.1 0.0 3.0 psi, 37.2 gpmFS 5.0 0.0 37.1 0.0 Pipe: 102 -37.2 1.101 PL 4.00 PF 2.8FS1 5.0 0.0 40.1 0.0 12.5 150 FTG RC PE 1.3BR 2.0 0.0 44.2 0.0 0.215 TL 13.00 PV Pipe: 103 -37.2 1.055 PL 3.00 PF 1.6BR 2.0 0.0 44.2 0.0 13.7 150 FTG E PE 0.0U1 2.0 H.S. 45.8 5.0 0.264 TL 6.00 PV Pipe: 104 -42.2 1.025 PL 6.00 PF 6.1U1 2.0 H.S. 45.8 5.0 16.4 150 FTG ET PE 1.7U2 -2.0 0.0 53.7 0.0 0.384 TL 16.00 PV Pipe: 105 -42.2 2.003 PL 140.00 PF 2.6U2 -2.0 0.0 53.7 0.0 4.3 150 FTG 4E PE 0.0U3 -2.0 0.0 56.3 0.0 0.015 TL 176.00 PV SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 5DATE: 1/14/2023ENCE, LA QUINTA\FIRE SPRINKLERS\CALCS\DELTA 2\2HD CALC.SDFJOB TITLE: PIPE TAG Q(GPM) DIA(IN) LENGTH PRESS. END ELEV. NOZ. PT DISC. VEL(FPS) HW(C) (FT) SUM. NODES (FT) (K) (PSI) (GPM) FL/FT (PSI) Pipe: 106 FIXED PRESSURE LOSS DEVICEU4 -2.0 0.0 59.3 0.0 3.0 psi, 42.2 gpmU3 -2.0 0.0 56.3 0.0 Pipe: 107 -42.2 1.481 PL 40.00 PF 4.2U4 -2.0 0.0 59.3 0.0 7.9 150 FTG TX PE 0.9SRC -4.0 SRCE 64.4 (N/A) 0.064 TL 66.00 PV NOTES (HASS): (1) Calculations were performed by the HASS 8.8 R4 D computer program in accordance with NFPA13 (2019) under license no. 64623334 granted by HRS Systems, Inc. 208 Southside Square Petersburg, TN 37144 (931) 659-9760 (2) The system has been calculated to provide an average imbalance at each node of 0.004 gpm and a maximum imbalance at any node of 0.102 gpm. (3) Total pressure at each node is used in balancing the system. Maximum water velocity is 16.4 ft/sec at pipe 104. (4) Items listed in bold print on the cover sheet are automatically transferred from the calculation report. (5) Available pressure at source node SRC under full flow conditions is 96.94 psi with a flow of 53.86 gpm. (6) PIPE FITTINGS TABLE User Pipe Table Name: STANDARD.PIP PAGE: F MATERIAL: CPVC HWC: 150Diameter Equivalent Fitting Lengths in Feet (in) F E T R K C G 45 El Tee RunT Kplg ChkVlv Gate 0.874 1.00 4.00 3.00 1.00 1.00 5.00 2.00 1.101 1.00 5.00 5.00 1.00 1.00 8.00 2.00 2.003 2.00 9.00 10.00 1.00 1.00 17.00 3.00 SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 6DATE: 1/14/2023ENCE, LA QUINTA\FIRE SPRINKLERS\CALCS\DELTA 2\2HD CALC.SDFJOB TITLE: PAGE: K MATERIAL: CT-K HWC: 150Diameter Equivalent Fitting Lengths in Feet (in) E T F R K C G N X Ell Tee 45-Ell TeeRun Kouplg ChkVlv GatVlv NPTee AngVlv 1.481 4.00 8.00 2.00 3.00 0.50 9.00 0.00 8.00 18.00 PAGE: L MATERIAL: CT-L HWC: 150Diameter Equivalent Fitting Lengths in Feet (in) E T F R K C G N Ell Tee 45-Ell TeeRun Kouplg ChkVlv GatVlv NPTee 1.025 3.00 7.00 1.00 2.00 0.00 7.00 0.00 7.00 PAGE: M MATERIAL: CT-M HWC: 150Diameter Equivalent Fitting Lengths in Feet (in) E T F R K C G N Ell Tee 45-Ell TeeRun Kouplg ChkVlv GatVlv NPTee 1.055 3.00 7.00 1.00 2.00 0.00 8.00 0.00 7.00 SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 7DATE: 1/14/2023ENCE, LA QUINTA\FIRE SPRINKLERS\CALCS\DELTA 2\2HD CALC.SDFJOB TITLE: WATER SUPPLY ANALYSISStatic: 97.84 psi Resid: 20.00 psi Flow: 600.0 gpm-14.70.020.040.060.080.0100.0120.0120180240300360420480540600FLOW (GPM)Note: (1) Dashed Lines indicate extrapolated values from Test Results (2) On Site pressures are based on hose stream deduction at the sourceGAUGE PRESSURE (psi)A12BLEGEND1Available pressure97.27 psi @ 42.2 gpm2Required pressure 64.36 psi @ 42.2 gpmA. Source Supply CurveB. System Demand Curve SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 8DATE: 1/14/2023ENCE, LA QUINTA\FIRE SPRINKLERS\CALCS\DELTA 2\2HD CALC.SDFJOB TITLE: WATER SUPPLY CURVE 108+ | | | 99+ 0 \ |\ 90+ \ | \ | \ | \ 81+ \ | \ | \ | \ P 72+ \ R | \ E | \ S X \ S 63+ \ U | \ R | \ E | \ 54+ \ ( | \ P | \ S | \ I 45+ \ ) | \ | \ | \ 36+ \ | \ | \ | \ 27+ \ | \ | \ |========================* <-20.0 psi @ 600 gpm 18+ LEGEND Flow Test Point | " | X = Required Water Supply " | 64.36 psi @ 42.2 gpm " 9+ " | 0 = Available Water Supply " | 97.27 psi @ 42.2 gpm " | " 0++-+---+----+-----+------+--------+--------+---------+-----------+ 200 300 400 500 600 700 800 900 1000 FLOW (GPM) RESIDENTIAL FIRE SYSTEMS, INC. 8085 EAST CRYSTAL DRIVE ANAHEIM, CA. 92807 HYDRAULIC CALCULATIONS FOR MARGUGLIO RESIDENCE 1HD CALC AT HIS CLOSET FILE NUMBER: 14339 DATE: JAN 14, 2023 -DESIGN DATA- OCCUPANCY CLASSIFICATION: NFPA 13D, 2016 EDITION DENSITY: 0.05 gpm/sq. ft. AREA OF APPLICATION: 400.0 sq. ft. COVERAGE PER SPRINKLER: 400.0 sq. ft. max. NUMBER OF SPRINKLERS CALCULATED: 1 sprinklers TOTAL SPRINKLER WATER FLOW REQUIRED: 20.0 gpm TOTAL WATER REQUIRED (including hose): 25.0 gpm FLOW AND PRESSURE (@ BOR): 20.0 gpm @ 27.1 psi REQUIRED PRESSURE (@ SRC): 38.1 psi SPRINKLER ORIFICE SIZE: 1/2 inch NAME OF CONTRACTOR: RESIDENTIAL FIRE SYSTEMS, INC DESIGN/LAYOUT BY: RUBI G. AUTHORITY HAVING JURISDICTION: R.C.F.D./ CITY OF LA QUINTA CONTRACTOR CERTIFICATION NUMBER: 786965 CALCULATIONS BY HASS COMPUTER PROGRAM , SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 2DATE: 1/14/2023ENCE, LA QUINTA\FIRE SPRINKLERS\CALCS\DELTA 2\1HD CALC.SDFJOB TITLE: WATER SUPPLY DATA SOURCE STATIC RESID. FLOW AVAIL. TOTAL REQ’D NODE PRESS. PRESS. @ PRESS. @ DEMAND PRESS. TAG (PSI) (PSI) (GPM) (PSI) (GPM) (PSI) SRC 97.8 20.0 600.0 97.6 25.0 38.1 AGGREGATE FLOW ANALYSIS: TOTAL FLOW AT SOURCE 25.0 GPMTOTAL HOSE STREAM ALLOWANCE AT SOURCE 0.0 GPMOTHER HOSE STREAM ALLOWANCES 5.0 GPMTOTAL DISCHARGE FROM ACTIVE SPRINKLERS 20.0 GPM NODE ANALYSIS DATANODE TAG ELEVATION NODE TYPE PRESSURE DISCHARGE (FT) (PSI) (GPM) 1 17.0 - - - - 12.4 - - -2 17.0 - - - - 12.4 - - -3 12.0 - - - - 14.6 - - -4 12.0 - - - - 14.6 - - -4A 12.0 - - - - 14.6 - - -4B 10.0 - - - - 15.5 - - -5 10.0 - - - - 15.3 - - -6 10.0 K= 5.80 11.9 20.07 10.0 - - - - 15.8 - - -8 10.0 - - - - 16.5 - - -9 10.0 - - - - 17.5 - - -10 10.0 - - - - 16.7 - - -11 10.0 - - - - 18.3 - - -12 10.0 - - - - 17.5 - - -13 12.0 - - - - 15.5 - - -14 0.0 - - - - 20.0 - - -TR 10.0 - - - - 19.0 - - -FS 5.0 - - - - 21.9 - - -FS1 5.0 - - - - 24.9 - - -BR 2.0 - - - - 27.1 - - -U1 2.0 HOSE STREAM 27.6 5.0U2 -2.0 - - - - 31.7 - - -U3 -2.0 - - - - 32.6 - - -U4 -2.0 - - - - 35.6 - - -SRC -4.0 SOURCE 38.1 25.0 SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 3DATE: 1/14/2023ENCE, LA QUINTA\FIRE SPRINKLERS\CALCS\DELTA 2\1HD CALC.SDFJOB TITLE: PIPE DATA PIPE TAG Q(GPM) DIA(IN) LENGTH PRESS. END ELEV. NOZ. PT DISC. VEL(FPS) HW(C) (FT) SUM. NODES (FT) (K) (PSI) (GPM) FL/FT (PSI) Pipe: 1 0.0 0.874 PL 10.08 PF 0.01 17.0 0.0 12.4 0.0 0.0 150 FTG 2FE PE 0.02 17.0 0.0 12.4 0.0 0.000 TL 16.08 PV Pipe: 2 0.0 1.101 PL 13.50 PF 0.02 17.0 0.0 12.4 0.0 0.0 150 FTG 2F2ETR PE 2.23 12.0 0.0 14.6 0.0 0.000 TL 31.50 PV Pipe: 3 0.0 0.874 PL 1.00 PF 0.03 12.0 0.0 14.6 0.0 0.0 150 FTG ER PE 0.04 12.0 0.0 14.6 0.0 0.000 TL 6.00 PV Pipe: 3A 0.0 1.101 PL 6.50 PF 0.03 12.0 0.0 14.6 0.0 0.0 150 FTG FT PE 0.04A 12.0 0.0 14.6 0.0 0.000 TL 12.50 PV Pipe: 3B 0.0 1.101 PL 28.00 PF 0.04A 12.0 0.0 14.6 0.0 0.0 150 FTG 4F4ETR PE -2.22 17.0 0.0 12.4 0.0 0.000 TL 58.00 PV Pipe: 3C 0.0 1.101 PL 8.33 PF 0.04A 12.0 0.0 14.6 0.0 0.0 150 FTG F2E2R PE 0.94B 10.0 0.0 15.5 0.0 0.000 TL 21.33 PV Pipe: 4 6.5 1.101 PL 10.08 PF 0.14B 10.0 0.0 15.5 0.0 2.2 150 FTG 2F3R PE 0.05 10.0 0.0 15.3 0.0 0.008 TL 15.08 PV Pipe: 5 20.0 0.874 PL 7.50 PF 3.55 10.0 0.0 15.3 0.0 10.7 150 FTG FETR PE 0.06 10.0 5.8 11.9 20.0 0.209 TL 16.50 PV Pipe: 6 -13.5 1.101 PL 10.66 PF 0.45 10.0 0.0 15.3 0.0 4.6 150 FTG FR PE 0.07 10.0 0.0 15.8 0.0 0.033 TL 12.66 PV Pipe: 7 -5.8 1.101 PL 56.75 PF 0.77 10.0 0.0 15.8 0.0 2.0 150 FTG 8F6E9R PE 0.08 10.0 0.0 16.5 0.0 0.007 TL 103.75 PV Pipe: 8 -5.8 1.101 PL 91.00 PF 1.08 10.0 0.0 16.5 0.0 2.0 150 FTG 9F7ET6R PE 0.09 10.0 0.0 17.5 0.0 0.007 TL 146.00 PV Pipe: 9 7.7 1.101 PL 42.16 PF 0.89 10.0 0.0 17.5 0.0 2.6 150 FTG 6F2ET6R PE 0.010 10.0 0.0 16.7 0.0 0.012 TL 69.16 PV SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 4DATE: 1/14/2023ENCE, LA QUINTA\FIRE SPRINKLERS\CALCS\DELTA 2\1HD CALC.SDFJOB TITLE: PIPE TAG Q(GPM) DIA(IN) LENGTH PRESS. END ELEV. NOZ. PT DISC. VEL(FPS) HW(C) (FT) SUM. NODES (FT) (K) (PSI) (GPM) FL/FT (PSI) Pipe: 10 7.7 1.101 PL 51.00 PF 0.910 10.0 0.0 16.7 0.0 2.6 150 FTG 6F2ET7R PE 0.07 10.0 0.0 15.8 0.0 0.012 TL 79.00 PV Pipe: 11 -13.5 1.101 PL 21.75 PF 0.99 10.0 0.0 17.5 0.0 4.6 150 FTG 2F2R PE 0.011 10.0 0.0 18.3 0.0 0.033 TL 25.75 PV Pipe: 12 6.5 1.101 PL 65.00 PF 0.811 10.0 0.0 18.3 0.0 2.2 150 FTG 9F2ET7R PE 0.012 10.0 0.0 17.5 0.0 0.008 TL 96.00 PV Pipe: 13 6.5 1.101 PL 84.50 PF 1.212 10.0 0.0 17.5 0.0 2.2 150 FTG F8E3T5R PE -0.913 12.0 0.0 15.5 0.0 0.008 TL 145.50 PV Pipe: 14 6.5 1.101 PL 46.00 PF 0.713 12.0 0.0 15.5 0.0 2.2 150 FTG 6F5E5R PE 5.214 0.0 0.0 20.0 0.0 0.008 TL 82.00 PV Pipe: 14A 6.5 1.101 PL 12.50 PF 0.214 0.0 0.0 20.0 0.0 2.2 150 FTG 2FT PE -4.34B 10.0 0.0 15.5 0.0 0.008 TL 19.50 PV Pipe: 15 -20.0 1.101 PL 8.66 PF 0.711 10.0 0.0 18.3 0.0 6.7 150 FTG R PE 0.0TR 10.0 0.0 19.0 0.0 0.068 TL 9.66 PV Pipe: 100 -20.0 1.101 PL 5.00 PF 0.7TR 10.0 0.0 19.0 0.0 6.7 150 FTG ER PE 2.2FS 5.0 0.0 21.9 0.0 0.068 TL 11.00 PV Pipe: 101 FIXED PRESSURE LOSS DEVICEFS1 5.0 0.0 24.9 0.0 3.0 psi, 20.0 gpmFS 5.0 0.0 21.9 0.0 Pipe: 102 -20.0 1.101 PL 4.00 PF 0.9FS1 5.0 0.0 24.9 0.0 6.7 150 FTG RC PE 1.3BR 2.0 0.0 27.1 0.0 0.068 TL 13.00 PV Pipe: 103 -20.0 1.055 PL 3.00 PF 0.5BR 2.0 0.0 27.1 0.0 7.3 150 FTG E PE 0.0U1 2.0 H.S. 27.6 5.0 0.084 TL 6.00 PV Pipe: 104 -25.0 1.025 PL 6.00 PF 2.3U1 2.0 H.S. 27.6 5.0 9.7 150 FTG ET PE 1.7U2 -2.0 0.0 31.7 0.0 0.146 TL 16.00 PV Pipe: 105 -25.0 2.003 PL 140.00 PF 1.0U2 -2.0 0.0 31.7 0.0 2.5 150 FTG 4E PE 0.0U3 -2.0 0.0 32.6 0.0 0.006 TL 176.00 PV SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 5DATE: 1/14/2023ENCE, LA QUINTA\FIRE SPRINKLERS\CALCS\DELTA 2\1HD CALC.SDFJOB TITLE: PIPE TAG Q(GPM) DIA(IN) LENGTH PRESS. END ELEV. NOZ. PT DISC. VEL(FPS) HW(C) (FT) SUM. NODES (FT) (K) (PSI) (GPM) FL/FT (PSI) Pipe: 106 FIXED PRESSURE LOSS DEVICEU4 -2.0 0.0 35.6 0.0 3.0 psi, 25.0 gpmU3 -2.0 0.0 32.6 0.0 Pipe: 107 -25.0 1.481 PL 40.00 PF 1.6U4 -2.0 0.0 35.6 0.0 4.7 150 FTG TX PE 0.9SRC -4.0 SRCE 38.1 (N/A) 0.024 TL 66.00 PV NOTES (HASS): (1) Calculations were performed by the HASS 8.8 R4 D computer program in accordance with NFPA13 (2019) under license no. 64623334 granted by HRS Systems, Inc. 208 Southside Square Petersburg, TN 37144 (931) 659-9760 (2) The system has been calculated to provide an average imbalance at each node of 0.001 gpm and a maximum imbalance at any node of 0.016 gpm. (3) Total pressure at each node is used in balancing the system. Maximum water velocity is 10.7 ft/sec at pipe 5. (4) Items listed in bold print on the cover sheet are automatically transferred from the calculation report. (5) Available pressure at source node SRC under full flow conditions is 97.26 psi with a flow of 42.66 gpm. (6) PIPE FITTINGS TABLE User Pipe Table Name: STANDARD.PIP PAGE: F MATERIAL: CPVC HWC: 150Diameter Equivalent Fitting Lengths in Feet (in) F E T R K C G 45 El Tee RunT Kplg ChkVlv Gate 0.874 1.00 4.00 3.00 1.00 1.00 5.00 2.00 1.101 1.00 5.00 5.00 1.00 1.00 8.00 2.00 2.003 2.00 9.00 10.00 1.00 1.00 17.00 3.00 SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 6DATE: 1/14/2023ENCE, LA QUINTA\FIRE SPRINKLERS\CALCS\DELTA 2\1HD CALC.SDFJOB TITLE: PAGE: K MATERIAL: CT-K HWC: 150Diameter Equivalent Fitting Lengths in Feet (in) E T F R K C G N X Ell Tee 45-Ell TeeRun Kouplg ChkVlv GatVlv NPTee AngVlv 1.481 4.00 8.00 2.00 3.00 0.50 9.00 0.00 8.00 18.00 PAGE: L MATERIAL: CT-L HWC: 150Diameter Equivalent Fitting Lengths in Feet (in) E T F R K C G N Ell Tee 45-Ell TeeRun Kouplg ChkVlv GatVlv NPTee 1.025 3.00 7.00 1.00 2.00 0.00 7.00 0.00 7.00 PAGE: M MATERIAL: CT-M HWC: 150Diameter Equivalent Fitting Lengths in Feet (in) E T F R K C G N Ell Tee 45-Ell TeeRun Kouplg ChkVlv GatVlv NPTee 1.055 3.00 7.00 1.00 2.00 0.00 8.00 0.00 7.00 SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 7DATE: 1/14/2023ENCE, LA QUINTA\FIRE SPRINKLERS\CALCS\DELTA 2\1HD CALC.SDFJOB TITLE: WATER SUPPLY ANALYSISStatic: 97.84 psi Resid: 20.00 psi Flow: 600.0 gpm-14.70.020.040.060.080.0100.0120.0120180240300360420480540600FLOW (GPM)Note: (1) Dashed Lines indicate extrapolated values from Test Results (2) On Site pressures are based on hose stream deduction at the sourceGAUGE PRESSURE (psi)A12BLEGEND1Available pressure97.62 psi @ 25.0 gpm2Required pressure 38.12 psi @ 25.0 gpmA. Source Supply CurveB. System Demand Curve SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 8DATE: 1/14/2023ENCE, LA QUINTA\FIRE SPRINKLERS\CALCS\DELTA 2\1HD CALC.SDFJOB TITLE: WATER SUPPLY CURVE 108+ | | | 99+ 0 \ |\ 90+ \ | \ | \ | \ 81+ \ | \ | \ | \ P 72+ \ R | \ E | \ S | \ S 63+ \ U | \ R | \ E | \ 54+ \ ( | \ P | \ S | \ I 45+ \ ) | \ | \ X \ 36+ \ | \ | \ | \ 27+ \ | \ | \ |========================* <-20.0 psi @ 600 gpm 18+ LEGEND Flow Test Point | " | X = Required Water Supply " | 38.12 psi @ 25.0 gpm " 9+ " | 0 = Available Water Supply " | 97.62 psi @ 25.0 gpm " | " 0++-+---+----+-----+------+--------+--------+---------+-----------+ 200 300 400 500 600 700 800 900 1000 FLOW (GPM) www.senjusprinkler.com Document No.U087474 • 01-29-2021 Page 1 of 8 The Model RC-RES Residential Flat Concealed Sprinklers are automatic sprinklers of the compressed fusible solder type. They are decorative and fast responding. The Cover Plate Assembly hides the Deflector, Heat Responsive Element etc., which is concealed above the ceiling. The cover plate has a flat profile, and its diameter is extremely small (2-5/8 inch, 68mm). The push-on and/or thread-on, thread-off design of the concealed cover plate assembly allows for easy installation of the cover plate. Therefore, the Model RC-RES should be your first choice when aesthetics is the major consideration for ultimate appeal and unbeatable performance is desired. The Model RC-RES is designed for residential occupancies and is perfect for use in homes, hotels and other living quarters. The Model RC-RES is to be used in wet pipe residential sprinkler systems for One- and Two- Family Dwellings and Manufactured Homes per NFPA 13D; wet pipe residential sprinkler systems for Residential Occupancies up to and Including Four Stories in Height per NFPA 13R; or, wet pipe sprinkler systems for the residential portions of any occupancies per NFPA 13. The Model RC-RES has a 5.8 (83.6 LPM/bar1/2) K-factor that meets the required residential flow rates with minimal residual pressure, which allows for smaller pipe sizes and water supply requirements. For extended installation flexibility, the Model RC-RES provides 1/2 inch (12.8mm) vertical adjustment. This adjustment in installation decreases the need for precise cutting of the pipe that drops to the sprinkler and allows for a perfect fit with a range of pipe lengths. The heat sensitivity and water distribution design of Model RC-RES allows for an increased chance of residents to escape or evacuate in case of a fire. However, residential fire sprinkler systems are not a substitute for fire safety awareness or fire safety construction required by building codes. “Lead Free” is defined in the Reduction of Lead in Drinking Water Act (S.3874) endorsed by AWWA’s Water Utility Council, and California Assembly Bill #1953 as having less than or equal to a weighted average of 0.25% lead in wetted surface of pipes, plumbing fittings and fixtures. GENERAL DESCRIPTION Residential Lead Free Flat Concealed Sprinkler, Pendent Model RC-RES K-Factor: 5.8 • SIN: SS8561 C US NSF/ANSI/CAN 61 & 372 www.senjusprinkler.com Document No.U087474 • 01-29-2021 Page 2 of 8 • Approvals: { cULus Listed {NSF/ANSI/CAN 61, NSF/ANSI 372 • Sprinkler Identification Number (SIN): SS8561 • Maximum Working Pressure: 175psi (12.1bar) • Discharge Coefficient (Nominal K-Factor): {K = 5.8 GPM/psi1/2 (83.6 LPM/bar1/2) • Temperature Rating: {162°F (72°C) Sprinkler with 140°F (60°C) Cover Plate {205°F (96°C) Sprinkler with 162°F (72°C) Cover Plate • Color Code (Sprinkler) {162°F (72°C): Uncolored {205°F (96°C): White • Color Code (Cover Plate) {140°F (60°C): No Mark {162°F (72°C): White-Colored Mark • Vertical Adjustment: 1/2 inch (12.8 mm) • Cover Plate Finishes: {Standard Finishes: White, Ivory, Beige, Brown, Black, Nickel, Wood Grain {Custom Finishes: Custom color and custom pattern cover plates are available on special order. Contact a Senju Sprinkler representative with any custom orders. Please see chart on Page 8 for more detail. • Physical Characteristics: Ref. Figures 1 and 1.1 Figure 1: Model RC-RES K = 5.8 Figure 1.1: Marking (Color Code) The Model RC-RES must be installed and maintained in accordance with the rules stated herein as well as in compliance with the applicable standards of the National Fire Protection Association regulations and the standards of any other authorities having jurisdiction. In the event of this condition, consult the authorities having jurisdiction for guidance and approval. Failure to do so may impair the integrity of these devices. It is the responsibility of the installing contractor to provide a copy of this document to the owner or their representative, and in turn, it is the obligation of the owner to provide a copy of this document to a succeeding owner. The owner is responsible for maintaining their fire protection system and devices in proper operating condition. The installing contractor or sprinkler manufacturer should be contacted with any related questions. WARNINGS TECHNICAL DATA www.senjusprinkler.com Document No.U087474 • 01-29-2021 Page 3 of 8 The herein stated rules for use and installation of Model RC-RES are provided by the manufacturer and must be strictly implemented for safe and full results. DESIGN CRITERIA Notes Residential Fire Sprinkler Systems should only be designed and installed by individuals who are completely familiar with automatic sprinkler system design, installation procedures, and techniques. Several criteria may apply to the installation and usage of each sprinkler. Consequently, it is recommended that the sprinkler system designer review and develop a working understanding of the complete list of criteria prior to initiating the design of the sprinkler system. Questions concerning sprinkler installation and usage criteria, which are not covered by the following instructions, should be submitted to your contracted company. Include sketches and technical details, as appropriate. In some instances, the requirements of this document may concern specifications which are more stringent, and which take precedence over those specified in NFPA 13, 13D, 13R, or by the authority having jurisdiction. The Model RC-RES must not be used in applications where the air pressure above the ceiling is greater than that below. Inspect all sprinklers after installation to ensure that both the gap between the cover plate, ceiling and the 6 slots in the cup are open and free from any air flow impediment. The spray from the sprinkler is distributed radially outward and downward from the sprinkler deflector. Consequently, the sprinklers must be located such that there will be no blind spaces shielded from spray by partitions, room dividers, overhangs or other parts of the dwelling structure. The number of sprinklers within each compartment (as defined by NFPA 13D, 13R, or 13) must be kept as few as possible while observing all guidelines relating to obstructions and spacing. Use only the Cover Plate provided for the Model RC-RES. The sprinkler must be secured in place by firmly fastening the sprinkler system piping to the structure. If the sprinkler is not properly secured in position, reaction forces resulting from sprinkler operation could alter its orientation and its water distribution pattern. OPERATION In case of fire, the solder component that holds together the Cover Plate and the Retainer melts. Then the Cover Plate is released at once. As a result, the Deflector drops down to the intended position. Two Heat Collectors are exposed to fire, and when sufficient heat from the fire is reached, internal components of the sprinkler fall apart. This leads to the water flow to be distributed on the affected fire area. (Ref. Figure 2) Figure 2: Operation Process (For illustrative purposes only) www.senjusprinkler.com Document No.U087474 • 01-29-2021 Page 4 of 8 Available Sprinkler Temperature Ratings Sprinkler Temperature Classification Sprinkler Nominal Temperature Rating Maximum Ambient Ceiling Temperature Temperature Rating of the Cover Plate Assembly Ordinary 162°F (72°C)100°F (38°C)140°F (60°C) Intermediate 205°F (96°C)150°F (66°C)162°F (72°C) Obstruction to Water Distribution Locations of sprinklers must follow the obstruction rules of NFPA 13, 13D and 13R for Residential Sprinklers. General Service Conditions The Model RC-RES must only be utilized in WET PIPE sprinkler systems. Heat Source Criteria Refer to NFPA 13D, 13R or 13 for the requirements relating to the prevention of possible activation of the Heat Responsive Element of Model RC-RES, due to the exposure of a heat source other than an actual fire. Precautionary Warnings for Corrosive Environments Model RC-RES sprinklers should not be installed where they may be subjected to a corrosive environment including the following: 1. Chlorine ion and Chloride environment Stress corrosion cracking may be caused by exposure to environments with Chlorine ion and Chloride. Exposure to this environment may result in sprinklers operating under Non-Fire conditions or Not Operating when exposed to an actual fire. 2. Sprinkler system piping with Copper Sprinkler systems should be constructed in compliance with the applicable standards and the requirements for copper piping when copper piping is used in the sprinkler system. (Reference standards NFPA 13, ASTM B813, B828, and CDA (Copper Development Association) – Solder Joint) All residual flux must be removed from the interior and exterior of the copper piping by thoroughly flushing before installation of the Sprinkler Heads. Otherwise, residues of flux may cause corrosion and/or leakage in the sprinkler system. Hydraulic Design Criteria The minimum required sprinkler flow rates for systems designed to NFPA 13D or 13R are given in Table A as a function of temperature rating and the maximum allowable coverage area. The sprinkler flow rate is the minimum required discharge from the most hydraulically demanding sprinkler from each of the total number of “design sprinklers” as specified in NFPA 13D or 13R. For systems designed to NFPA 13, the number of designed sprinklers is to be the four most hydraulically demanding sprinklers. The minimum required discharge from each of the four sprinklers is to be the greater of the following: • The flow rates given in Table A for NFPA 13D and 13R as a function of temperature rating and maximum allowable coverage area. • A minimum discharge of 0.1GPM/sq.ft. [4.07LPM/sq.m] over the “design area” comprised of the four most hydraulically demanding sprinklers for the actual coverage area being protected by the four sprinklers. www.senjusprinkler.com Document No.U087474 • 01-29-2021 Page 5 of 8 INSTALLATION The Model RC-RES must be installed in accordance with the following instructions: a. For coverage area dimensions less than the above mentioned, it needs to use the minimum required flow for the Next Higher Coverage Area listed. b. Requirement is based on minimum flow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated using the nominal K-Factor. Refer to Hydraulic Design Criteria Section for details. NOTES Do not use any sprinklers which have been subjected to potential mechanical damage. Do not use any sprinklers which show deformation or cracking in either the Sprinkler or the Protective Cap. Prior to installation, sprinklers should be maintained in the original cartons and packaging until used to minimize the potential for damage to the sprinklers that could cause improper operation or non-operation. The Protective Cap must remain on the sprinkler during installation. After the installation is completed, the Protective Cap must be removed to place the sprinkler in service. Use a torque of 7 to 14 ft·lbs (9.5 to 19.0 N·m) to achieve a 1/2 inch NPT sprinkler joint. If you exceed the recommended maximum torque, this could result in damage to the sprinkler inlet, which may lead to leakage from the sprinkler. Use only NR-H model wrench socket for installation of RC-RES sprinklers. Use of any other wrench or socket is prohibited and may cause damage to the sprinkler. In case of insufficient adjustment in Cover Plate installation, do not try to overly tighten, screw the sprinkler too loosely or make any modification to the cover plate assembly. Readjust the sprinkler fitting for a better fit. Do not rotate the Cap Removal Tool for RC to the left with force when placing the two hook arms into place. The installed sprinkler may become loosened, which may cause water leakage. Sprinkler Spacing Criteria The minimum spacing between sprinklers is 8 feet (2.4m). The maximum spacing between sprinklers cannot go beyond the coverage area calculated by using the specific hydraulic factors. (Ref. Table A) Table A. NFPA 13D & 13R Wet Pipe Hydraulic Design Criteria for Model SS8561 For systems with ceiling types smooth flat horizontal, or beamed, or sloped, in accordance with NFPA 13D, 13R or 13 as applicable. Maximum Coverage Area(a) Ft. x Ft. (m x m) Maximum Spacing Ft. (m) Ordinary Temperature Rating 162˚F (72˚C) Intermediate Temperature Rating 205˚F (96˚C)Deflector to Ceiling Installation Type Minimum Spacing Ft. (m)Flow (b) GPM (LPM) Pressure(b) PSI (bar) Flow (b) GPM (LPM) Pressure(b) PSI (bar) 12 x 12 (3.7 x 3.7) 12 (3.7) 16 (60.6) 7.6 (0.52) 16 (60.6) 7.6 (0.52)Smooth Ceilings 3/8 to 7/8 Inches. Beamed Ceilings per NFPA 13D, 13R or 13. Installed in beam 3/8 to 7/8 inches below bottom of beam. Concealed 8 (2.4) 14 x 14 (4.3 x 4.3) 14 (4.3) 16 (60.6) 7.6 (0.52) 16 (60.6) 7.6 (0.52) 16 x 16 (4.9 x 4.9) 16 (4.9) 16 (60.6) 7.6 (0.52) 16 (60.6) 7.6 (0.52) 18 x 18 (5.5 x 5.5) 18 (5.5) 17 (64.4) 8.6 (0.59) 17 (64.4) 8.6 (0.59) 20 x 20 (6.1 x 6.1) 20 (6.1) 20 (75.7) 11.9 (0.82) 20 (75.7) 11.9 (0.82) www.senjusprinkler.com Document No.U087474 • 01-29-2021 Page 6 of 8 Figure 5: Protective Cap Removal Figure 3: Installation Figure 4: Ratchet & Socket Installation Steps Step 1: The installation requirements for the sprinkler are as follows: to be installed only in the pendent position with the waterway perpendicular to the ceiling. Install the sprinkler fitting so that the distance from the face of the fitting to the mounting surface will be nominally 2 inches (50.8mm) as shown in Figure 3. Step 2: With pipe thread sealant applied to the threads, hand tighten the sprinkler into the sprinkler fitting. Then tighten it with the Socket NR-H or Ratchet (3/8” drive) & Socket NR-H Combination (Ref. Figure 4). The teeth of the Socket must fit perfectly with the grooves on the Sprinkler for proper installation (Ref. Figure 4). Step 3: If desired, the Protective Cap may also be used to locate the center of the clearance hole by gently pushing the ceiling material against the center point of the Protective Cap. Before the installation of the ceiling, the sprinkler installation can be started with a 2-3/8 inch (60mm) diameter clearance hole (Ref. Figure 3). Use the “Vertical Adjustment” indicator on the Protective Cap to check for proper installation height (Ref. Figure 3). Step 4: Use the Cap Removal Tool for RC to remove the Protective Cap (Ref. Figure 5), and then push or screw a Cover Plate Assembly on the Cup of the Sprinkler by hand until its flange just has contact with the ceiling (Ref. Figure 6 and Figure 7). Stop tightening the Cover Plate Assembly once the flange has contact with the ceiling. If the ceiling has been lifted from its normal position in the process of tightening the Cover Plate Assembly, readjust the cover plate assembly as necessary. If the flange of the Cover Plate Assembly cannot contact the ceiling sufficiently, readjust the sprinkler fitting as necessary. When properly installed, there is a nominal 1/16 inch (1.6mm) air gap between the lip of the Cover Plate and the ceiling, as shown in Figure 6. www.senjusprinkler.com Document No.U087474 • 01-29-2021 Page 7 of 8 CARE & MAINTENANCE The following instructions must be implemented for the maintenance and service of the Model RC-RES. Notes Wet pipe sprinkler systems must be maintained at a minimum temperature of 40°F / 4°C to prevent freezing and bursting of the pipe and/or sprinklers. Automatic sprinklers are not to be tested with a heat source. Operation of the heat responsive element can result. Absence of a Cover Plate Assembly may delay the response time of the sprinkler in case of a fire. Install the cover plate assembly properly, as shown in Figure 6. Improper installation of the cover plate assembly may cause improper operation or non-operation. If the ceiling is to be repainted after the installation of the Sprinkler, care must be exercised to ensure that the new paint does not seal off any of the air gap. Factory painted Cover Plates must not be repainted. They should be replaced, if necessary, by factory painted cover plates. Non- factory applied paint may adversely delay or prevent sprinkler operation in case of a fire. Do not pull the Cover Plate. Separation may result. In preparation for maintenance of the fire protection system, permission to close the main control valve must be obtained from the proper authorities, and all affected parties by this action, and must be informed before the maintenance session can commence. Do NOT enclose any sprinklers within drapes, curtains, or valances. Do NOT hang anything from the sprinklers. Do NOT clean the sprinklers with soap and/or water, detergents, ammonia, cleaning fluids, or other chemicals. Remove dust, lint, cobwebs, cocoons, insects, and larvae by gently brushing with a feather duster or gently vacuuming with a soft bristle (i.e., dusting) brush attachment. Exercise suitable safety precautions in the use and storage of highly flammable materials. The rapid rate of fire development and spread of these materials can reduce the ability of the sprinkler system to aid in the control of a fire involving such hazards. Figure 7: Installation (Correct and Incorrect) Figure 6: Installation (Cover Plate Assembly) www.senjusprinkler.com Document No.U087474 • 01-29-2021 Page 8 of 8 ORDER PROCEDURE LIMITED WARRANTY When placing an order, please contact a local distributor with the following information (Model Name, Temperature Rating and Finish). For details of warranty, refer to Sales Contract. Leaking or corroded sprinklers must be replaced. Automatic Sprinklers must be kept in a cool and dry place. Automatic sprinklers must never be physically altered, such as painted, plated, or coated, once shipped from the factory. If the sprinklers have been in any way modified, they must be replaced. Great caution must be applied to prevent damage to the sprinklers at all stages - before, during, and after installation. Damaged units because of dropping, hitting, over-tightening, or wrench slippage, must be replaced. The Model RC-RES must only be replaced with pendent sprinklers which are listed for residential fire protection service and which have the same nominal K-Factor, the same coverage area, and the same or lower flow ratings (as indicated under Table A “Hydraulic Design Criteria”). When remodeling, such as by adding false beams or light fixtures or changing the location of compartment walls, first verify that the new construction will not violate the installation requirements of the applicable standards of NFPA. Alter the new construction and/or the sprinkler system to suit the requirements of this document and the applicable NFPA regulations. The owner is responsible for the maintenance of the sprinkler system, including inspection and testing of its compliance with this document, as well as the standards of the National Fire Protection Association (e.g., NFPA 25), and the regulations of any other authorities having jurisdiction. The owner should direct any questions regarding the above rules and regulations to the installing contractors or the sprinkler manufacturer. It is recommended that automatic sprinkler systems be inspected, tested, and maintained by a qualified Inspection Service in accordance with NFPA 25. Sprinkler • Model: RC-RES SIN: SS8561, Residential Flat Concealed Sprinkler, Pendent, K5.8, Temperature: 162°F (72°C) or 205°F (96°C) Cover Plate Assembly • 2-5/8 inch (φ68mm) or 3-1/4 inch (φ83mm) or 2-5/8 inch square (□68mm), Order separately from Sprinkler Please refer to the chart below for available sizes, temperature, and finishes. Tools & Accessories • Socket NR-H for use with a 3/8” drive ratchet (not included) • Socket NR-H Plastic for use with a 1/2” drive ratchet (not included) • Cap Removal Tool for RC • Cover Plate Installation Tool Standard Finishes Custom Finishes White Ivory Beige Brown Black Nickel Copper Wood Grain Custom Color Custom Pattern 2-5/8” Round, 140°F ------ 3-1/4” Round, 140°F 2-5/8” Square, 140°F ------- 2-5/8” Round, 162°F ------- 3-1/4” Round, 162°F -- 2-5/8” Square, 162°F ------- victaulic.com 43.01 16382 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved. ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT. 1.0 PRODUCT DESCRIPTION RESIDENTIAL PENDENT/RECESSED PENDENT SPRINKLERS SIN V3010 V2740 V5610 V3426 ORIENTATION PENDENT PENDENT PENDENT PENDENT K-FACTOR1 3.0 Imp./4.2 S.I.4.9 Imp./7.1 S.I.5.6 Imp./8.1 S.I.6.9 Imp./9.9 S.I. CONNECTION 1/2" NPT/15 mm 1/2" NPT/15 mm 1/2" NPT/15 mm 3/4” NPT/20 mm MAX. WORKING PRESSURE 175 psi (1200 kPa)175 psi (1200 kPa)175 psi (1200 kPa)175 psi (1200 kPa) GLOBE RE-DESIGNATION GL3010 –GL5610 – GLOBE EQUIVALENT –GL4910 –– AVAILABLE WRENCHES SPRINKLER V27 Recessed V27 Open End V56 Recessed V56 Open End V34 Recessed V34 Open End V3010 ■■ V2740 ■■ V5610 ■■ V3426 ■■ Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar Min. Operating Pressure: UL: 7psi/48 kPa/.5 bar Temperature Rating: See tables in section 2.0 1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0. Victaulic® FireLock™ Series FL-RES Residential, Quick Response Pendent and Recessed Pendent, K3.0 (4.3), K4.9 (7.0), K5.6 (8.0), K6.9 (9.9)43.01 1 43.01 16382 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved. victaulic.com 2.0 CERTIFICATION/LISTINGS SIN Nominal K Factor Listing Agency/ Approved Temperature Ratings Max. Coverage Area Width X Length Flow Pressure Adjustment Deflector to Ceiling/ Mounting Surface Distance Minimum Spacing Imperial S.I.2 155°F/68°C 175°F/79°C 200°F/93°C Ft. x Ft m x m GPM L/min PSI kPa in mm in (mm) Ft. m V3010 3.0 4.2 cULus EU cULus cULus 12 x 12 3.7 x 3.7 8 30.3 7.1 49 1/2 15 Smooth Ceilings Recessed See Installation Detail Smooth Ceilings Exposed Max. 4 (101.6) Beamed Ceilings Adjacent per NFPA 13, 13D, or 13R as appropriate Beamed Ceilings In Beam 14 Max. Beam Depth Recessed in Beam: See Installation detail 8 2.4 14 x 14 4.3 x 4.3 10 37.8 11.1 76.5 V2740 4.9 7.1 cULus cULus N/A 12 x 12 3.7 x 3.7 13 49.2 7.0 48 1/2 and 3/4 15 and 20 14 x 14 4.3 x 4.3 13 49.2 7.0 48 16 x 16 4.9 x 4.9 13 49.2 7.0 48 18 x 18 5.5 x 5.5 17 64.3 12.0 83 20 x 20 6.1 x 6.1 20 75.7 16.7 115 1/2 15 V5610 5.6 8.1 cULus NA N/A 12 x 12 3.7 x 3.7 15 57 7.2 50 1/2 15 16 x 16 4.9 x 4.9 19 72 11.5 79 18 x 18 5.5 x 5.5 21 79 14.1 97 20 x 20 6.1 x 6.1 24 91 18.4 127 V3426 6.9 9.9 cULus cULus N/A 12 x 12 3.7 x 3.7 20 75.7 8.4 58 1/2 and 3/4 15 and 20 14 x 14 4.3 x 4.3 20 75.7 8.4 58 16 x 16 4.9 x 4.9 20 75.7 8.4 58 18 x 18 5.5 x 5.5 20 75.7 8.4 58 20 x 20 6.1 x 6.1 22 83.3 10.2 70 NOTE • Listings and approval as of printing. 2 victaulic.com 43.01 16382 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved. victaulic.com 3.0 SPECIFICATIONS – MATERIAL Deflector: Bronze Bulb Nominal Diameter: 3.0mm Load Screw: Bronze Pip Cap: Bronze Spring Seal Assembly: PTFE coated Beryllium nickel alloy Frame: Brass Lodgement Spring: Stainless Steel Installation Wrench: Ductile iron Sprinkler Frame Finishes: • Plain brass • Chrome plated • White polyester painted • Flat black polyester painted • Custom polyester painted NOTE • For cabinets and other accessories refer to separate sheet. ⁄"/11 mm Nominal make-in Frame Bulb Load screw Deector Pip cap and spring seal 2¼"/ 57 mm 1⁄"/ 28 mm V3010 ⁄"/11 mm Nominal make-in Frame Bulb Load screw Deector Lodgement spring Pip cap and spring seal 2⁄"/ 60 mm 1⁄"/ 27 mm V2740 ⁄"/11 mm Nominal make-in Frame Bulb Load screw Deector Pip cap and spring seal 2¼"/ 57 mm 1¼"/ 32 mm V5610 ½"/13 mm Nominal make-in Frame Bulb Load screw Deector Lodgement spring Pip cap and spring seal 2½"/ 63 mm 1⁄"/ 36 mm V3426 3 victaulic.com 43.01 16382 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved. victaulic.com 4.0 DIMENSIONS 2⁄"/60 mm 2"/51 mm Hole in ceiling Finished surface1¼"/32 mm Min. 1¾"/44 mm Max. Typical ceiling ⁄"/3 mm Min. ⁄"/16 mm Max. 2⁄"/ 75 mm V3010 2⁄"/60 mm 2"/51 mm Hole in ceiling Typical ceiling Finished surface 1"/25 mm Max. (¾" Adj.) ¾"/19 mm Max. (½" Adj.) ¼"/6 mm Min. 1⁄"/43 mm Max. 1⁄"/30 mm Min. (½" Adj.) ⁄"/24 mm Min. (¾" Adj.) 2⁄"/ 75 mm V2740 4 victaulic.com 43.01 16382 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved. victaulic.com 4.0 DIMENSIONS (CONTINUED) 2⁄"/60 mm 2"/51 mm Hole in ceiling Finished surface Typical ceiling ⁄"/3 mm Min. ⁄"/16 mm Max. 1¼"/32 mm Min. 1¾"/44 mm Max. 2⁄"/ 75 mm V5610 2⁄"/60 mm 2"/51 mm Hole in ceiling Typical ceiling Finished surface ⁄"/22 mm Max. (¾" Adj.) ⁄"/16 mm Max. (½" Adj.) ⁄"/3mm Min. 1⁄"/29 mm Min. ( ¾Adj .) 1⁄"/34 mm Min. (½" Adj.) 1⁄"/47 mm Max. 2⁄"/ 75 mm V3426 5 victaulic.com 43.01 16382 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved. victaulic.com User Responsibility for Product Selection and Suitability Each user bears final responsibility for making a determination as to the suitability of Victaulic products for a particular end-use application, in accordance with industry standards and project specifications, as well as Victaulic performance, maintenance, safety, and warning instructions. Nothing in this or any other document, nor any verbal recommendation, advice, or opinion from any Victaulic employee, shall be deemed to alter, vary, supersede, or waive any provision of Victaulic Company's standard conditions of sale, installation guide, or this disclaimer. Intellectual Property Rights No statement contained herein concerning a possible or suggested use of any material, product, service, or design is intended, or should be constructed, to grant any license under any patent or other intellectual property right of Victaulic or any of its subsidiaries or affiliates covering such use or design, or as a recommendation for the use of such material, product, service, or design in the infringement of any patent or other intellectual property right. The terms “Patented” or “Patent Pending” refer to design or utility patents or patent applications for articles and/or methods of use in the United States and/or other countries. Note This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations. Installation Reference should always be made to the Victaulic installation handbook or installation instructions of the product you are installing. Handbooks are included with each shipment of Victaulic products, providing complete installation and assembly data, and are available in PDF format on our website at www.victaulic.com. Warranty Refer to the Warranty section of the current Price List or contact Victaulic for details. Trademarks Victaulic and all other Victaulic marks are the trademarks or registered trademarks of Victaulic Company, and/or its affiliated entities, in the U.S. and/or other countries. 5.0 PERFORMANCE Sprinkler is to be installed and designed as per NFPA, FM Datasheets, or any local standards. 6.0 NOTIFICATIONS WARNING • Read and understand all instructions before attempting to install any Victaulic products. • Always verify that the piping system has been completely depressur- ized and drained immediately prior to installation, removal, adjust- ment, or maintenance of any Victaulic products. • Wear safety glasses, hardhat, and foot protection. Failure to follow these instructions could result in death or serious personal injury and property damage. • These products shall be used only in fire protection systems that are designed and installed in accordance with current, applicable National Fire Protection Association (NFPA 13, 13D, 13R, etc.) standards, or equivalent standards, and in accordance with applicable building and fire codes. These standards and codes contain important information regarding protection of systems from freezing temperatures, corrosion, mechanical damage, etc. • The installer shall understand the use of this product and why it was specified for the particular application. • The installer shall understand common industry safety standards and potential consequences of improper product installation. • It is the system designer's responsibility to verify suitability of materials for use with the intended fluid media within the piping system and external environment. • The material specifier shall evaluate the effect of chemical composition, pH level, operating temperature, chloride level, oxygen level, and flow rate on materials to confirm system life will be acceptable for the intended service. Failure to follow installation requirements and local and national codes and standards could compromise system integrity or cause system failure, resulting in death or serious personal injury and property damage. 7.0 REFERENCE MATERIALS Ratings: All glass bulbs are rated for temperatures from -67°F/-55°C. 6 victaulic.com Agency Listings WFDTH Waterflow Detector The System Sensor WFDTH Retard T-Tap Waterflow Detector is designed for primary signaling in residential systems and fits within 2×4 stud wall construction. Features • Residential sprinkler systems • Sealed retard mechanism • Visual switch activation • Rugged, dual SPDT switches enclosed in a durable terminal block • Easy to install and maintain design • Vertical or horizontal mount • Field replaceable retard mechanism and switch assembly • Twelve different flexible paddles • Durable, tamper resistant enclosure • Two conduit openings • Handy depth gauge • Accommodates up to 12 AWG wire • 100% synchronization fires alarm panel and local bell simultaneously The WFDTH fits any tee that has a 1˝ NPT branch, including: 1˝, 1¼˝, 1½˝, and 2˝ NPT threaded ferrous and brass tees; 1˝, 1¼˝, 1½˝ and 2˝ copper sweat tees; Central, Spears®, and Victaulic® brand 1˝ CPVC tees; and 1½˝ polybutylene tees. Design. The design of the WFDTH makes it easy to install and simple to maintain. It can be mounted in the vertical or horizontal position. Two conduit openings permit easy attachment to the local alarm system. The retard mechanism and switch assembly are field- replaceable. Features. Twelve different flexible paddles fit 1˝, 1¼˝, 1½˝, and 2˝ tees. Sizes are marked clearly on the paddle for ease of installation. Plastic paddles slip over the actuating lever and are securely fastened with one screw. The handy depth gauge insures the proper installation depth and clearance of the detector to the tee. Construction. The WFDTH includes a durable and tamper resistant enclosure. Its sealed retard assures that the delay mechanism is not contaminated by dust and dirt when the cover is removed. The long lasting cover completely encloses the electrical components to further keep out dust and dirt. Improved self-guiding security screws and removal tools make detectors resistant to tampering and simplify field maintenance. S739 CS169 167-93-E7770-1653:114 3033305 3825 Ohio Avenue • St. Charles, IL 60174 Phone: 800-SENSOR2 • Fax: 630-377-6495 ©2010 System Sensor. Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. A05-0941-008 • 7/10 • #2451 Electrical Connections Ordering Information UL Model No.ULC/Canadian Model No.Description WFDTH WFDTHA Waterflow Detector, Fits 1˝, 1¼˝, 1½˝, 2˝ ferrous and brass threaded tees; 1˝, 1¼˝, 1½˝, 2˝ copper sweat tees; 1˝ CPVC tees; and 1½˝ polybutylene tees Accessories A77-01-02 Replacement terminal block for WFDTH S07-66002 Replacement tamper screws for covers of WFDTH PRK9 Replacement paddle kit – 12 paddles for WFDTH (see WFDTH for sizes included) WFDW Replacement tamper proof wrench for cover of WFDTH A3008-00 Replacement retard mechanism C58-0009-000 Replacement metal cover Spears® is a registered trademark of the Spears Manufacturing Company. Victaulic® is a registered trademark of the Victaulic Company of America. WFDTH Specifications Architectural/Engineering Specifications Model shall be a WFDTH as manufactured by System Sensor. T-tap waterflow detectors shall be installed on a tee that has a 1˝ NPT branch including: 1˝, 1¼˝, 1½˝, or 2˝ threaded ferrous or brass tee; 1–2˝ copper sweat tees; Central, Spears®, and Victaulic® brand 1˝ CPVC tees; or 1½˝ polybutylene tee as designated on the drawings and/or as specified herein. Detectors shall mount on any clear pipe span of the appropriate size, either a vertical or horizontal run at least 6˝ from any fittings or valves which may change water direction, flow rate, or pipe diameter or no closer than 24˝ from a valve or drain. Detectors shall have a sensitivity in the range of 4 to 10 gallons per minute and a static pressure rating of 250 psi. The retard t-tap detector shall be a sealed mechanical pneumatic unit with visual indication of actuation. The actuation mechanism shall include a polyethylene vane inserted through the tee fitting and connected by a mechanical linkage to the delay mechanism. Outputs shall consist of dual SPDT switches (Form C contacts). Two conduit entrances (one of which is a knockout type) for standard fittings of commonly used electrical conduit shall be provided on the detectors. A grounding provision is provided. WFDTH is listed by Underwriters Laboratories for indoor use. Delay Adjustment Dial + + – – SSM24-X SSV120-X NOTE: COMMON AND B-NO CONNECTIONS WILL CLOSE WHEN VANE IS DEFLECTED, I.E., WHEN WATER IS FLOWING. DUAL SWITCHES PERMIT APPLICATIONS TO BE COMBINED ON A SINGLE DETECTOR. BREAK WIRE AS SHOWN FOR SUPERVISION OF CONNECTION. DO NOT ALLOW STRIPPED WIRE LEADS TO EXTEND BEYOND SWITCH HOUSING. DO NOT LOOP WIRES. POWER 24VDC OR 120VAC INITIATING LOOP UL-LISTED COMPATIBLE CONTROL PANEL CONTACT RATINGS 125/250 VAC 24 VDC 10 AMPS 2.5 AMPS SCHEMATIC OF INDIVIDUAL SWITCH IN “NO WATERFLOW” CONDITION SUGGESTED EOL RESISTOR B-NO COM A-NC Delay adjustment dial NOTE: Retard time may exceed 90 seconds. Adjust and verify that time does not exceed 90 seconds.55700154530TIME D E L AY IN SECOND SNUMBER O N D I A L IS APPROXIM A T E Physical/Operating Specifications Static Pressure Rating 250 PSI (max.)Operating Temperature Range 32°F to 120°F (0°C to 49°C) Maximum Surge 18 FPS Enclosure Rating UL listed for indoor use Triggering Threshold Bandwidth (Flow Rate) 4–10 GPM Cover Tamper Switch Canadian models only, factory installed Overall Dimensions, Installed 4.5˝ H × 3.55˝ W × 6.7˝ L (11.4cm H × 9cm W × 17cm L) Service Use Automatic Sprinkler: NFPA 13 One or Two Family Dwelling: NFPA 13D Residential Occupancies up to 4 Stories: NFPA 13R National Fire Alarm Code: NFPA 72 Contact Ratings Two sets of SPDT (Form C) 10.0 A @ 125/250 VAC 2.5 A @ 24 VDC Shipping Weight 2.6 lbs. (1.2 kg.) Compatible Tee Fittings Threaded ferrous and brass tees, copper sweat tees, CPVC tees, and polybutylene tees Warranty 3 years Conduit Entrances Two openings for ½˝ conduit.U.S. Patent Numbers 3,845,259; 4,782,333; 5,213,205 FlameGuard® CPVC Fire Sprinkler Products Technical Information FlameGuard® CPVC True Union Drain & Swing Check Valves for NFPA 13D Applications Only Made in the U.S.A.Suitable for low pressure air handling 5 psi, not for distribution of compressed air or gas Page 1424Due to Material Cost Variations, Prices Subject to Change. Check On-line Catalog@ www.spearsmfg.com TRUE UNION INDUSTRIAL DRAIN VALVES CPVC Gray Valve with CPVC Orange End Connector Socket x Socket E D A B C Part Number Size A B C D E 1822-007CFG 3/4 2-1/4 2-3/4 4-3/4 2-7/8 3-3/8 1822-010CFG 1 2-1/2 2-7/8 5-1/8 3-1/8 3-7/16 1822-012CFG 1-1/4 3-1/16 3-1/4 5-3/4 3-5/8 3-7/8 1822-015CFG 1-1/2 3-1/2 3-1/2 6-1/4 4 4-3/16 1822-020CFG 2 4-1/4 4-3/4 7-3/4 4-1/2 5-1/8 Not UL Listed FlameGuard®CPVC Drain & Swing Check Valves for NFPA 13D Applications Only Application: FlameGuard® CPVC Orange Swing Check Valves and PVC/CPVC True Union Drain Valves are for use in configuring CPVC Fire Sprinkler System connection to water supply (riser/drain assembly) in NFPA 13D installations only. These valves are not UL Listed and NOT for use in any other locations within the fire sprinkler system. TRUE UNION DRAIN VALVES PVC Valve with CPVC End Connector Socket x Socket D A B C E Part Number Size A B C D E 3622-007FG 3/4 2-1/4 2-3/4 4-3/4 2 3 3622-010FG 1 2-1/2 2-7/8 5-1/8 2-5/16 3-7/16 Not UL Listed FlameGuard® CPVC Fire Sprinkler Products Technical Information FlameGuard® CPVC True Union Drain & Swing Check Valves for NFPA 13D Applications Only Page 1425 Suitable for low pressure air handling 5 psi, not for distribution of compressed air or gas Spears® Manufacturing CompanyDue to Material Cost Variations, Prices Subject to Change. Check On-line Catalog@ www.spearsmfg.com CPVC SPECIAL REINFORCED THREAD INLET SWING CHECK VALVES SR Fipt x Socket A B C D Part Number Size A B C D Approx. Wt. (Lbs) S1520-10FSRSCO 1 1-11/16 2-15/16 4-9/16 2-5/8 .33 S1520-12FSRSCO 1-1/4 2-1/16 3-5/8 5-1/2 3-3/8 .42 S1520-15FSRSCO 1-1/2 2-7/16 3-11/16 5-5/8 3-3/8 .89 Not UL Listed CPVC SWING CHECK VALVES Socket x Socket Part Number Size A B C D Approx. Wt. (Lbs) S1520-10CO 1 1-11/16 2-5/16 4-9/16 2-5/8 .33 S1520-12CO 1-1/4 2-1/16 2-15/16 5-1/2 3-3/8 .42 S1520-15CO 1-1/2 2-7/16 3 5-5/8 3-3/8 .89 Not UL Listed A B C D OFFICE OF THE FIRE MARSHAL – LA QUINTA 78495 Calle Tampico, La Quinta, CA 92253 • Phone (760) 777-7074 • www.rvcfire.org July 5, 2022 Residential Fire Systems INC 8085 E Crystal Drive Anaheim, CA 92807 Re: Residential Fire Sprinkler Plan Review – MARGUGLIO FSS2022-0177 / 80705 VIA MONTECITO, LA QUINTA, CA 92253 The sprinkler plans you submitted for the above referenced project have been reviewed by Riverside County Fire Department - Office of the Fire Marshal personnel and are approved with the following conditions. Permanently marked identification signs shall be attached to all control valves. The following inspections/tests are required to be witnessed by Office of the Fire Marshal Staff: (a) Overhead Rough and Hydro static test: All piping shall be visible and pumped at normal operating pressure. *No jacketed electrical and data wiring shall be in contact with, nor have the potential to contact CPVC piping once insulation is installed. (b) Final inspection The Fire Department approved plans and conditions letter must be at the job site. Applicant/installer shall be responsible to contact the Fire Department to schedule inspections. Requests for inspections are to be made at least 48 hours in advance and may be arranged by calling (760)777-7131. All questions regarding the meaning of these conditions should be referred to the Office of the Fire Marshal staff at (760)777-7074. Kohl Hetrick - Fire Safety Specialist 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 RIVERSIDE COUNTY FIRE PROTECTION PLANNING RECORD OF INSPECTIONS / PERMIT CARD THIS CARD IS TO REMAIN ON SITE AT ALL TIMES. INSTALLING CONTRACTOR MUST BE PRESENT FOR ALL INSPECTIONS. SEE NOTES ON REVERSE SIDE. JOB ADDRESS: 80705 VIA MONTECITO PERMIT#: FSS2022-0177 DATE ISSUED: 7/5/2022 DESCRIPTION: MARGUGLIO RESIDENCE CONTRACTOR: RESIDENTIAL FIRE SYSTEMS INC HYDRANT SYSTEM DATE INITIALS SPECIAL SUPPRESSION DATE INITIALS Thrust block pre-pour Door fan test UG rough piping Abort test UG hydro Mechanical shutdown Flush Detector test Final E F Deluge/pre-action SPRINKLER U.G. Final E F Thrust block pre-pour UST/AST TANK UG rough piping Installation UG hydro Removal Flush Emergency shut off Final E F Primary piping FIRE SPRINKLER Secondary piping Weld inspection Dispensers & shear valves Overhead rough piping Final E F Overhead hydro MISC. INSPECTIONS UG flush / OK to connect Spray booths Main drain/inspectors’ test Hood/duct extinguishing High pile storage High pile rack storage In-rack sprinklers H.P. vents/access/corridors Hose racks Tract access/hydrant verification Final E F Access & Address verification HOOD EXTINGUISHING OTHER CONST. PERMIT Detection system Function test Gas/electrical shut-off Nozzle model/placement Fire alarm connection Final E F SPRAY BOOTHS FIRE CODE PERMIT(S) Installation Air flow test Mechanical interlock Extinguishing system Fire alarm connection Final E F FIRE ALARM KNOX SYSTEM Rough-wire inspection Building Knox box Function test Gate access Knox box/padlock Duct detectors/velocity BUILDING INSPECTIONS 24 hr. battery test T/I final Sprinkler monitoring Shell final Final E F Final for occupancy FINAL INSPECTION DATE: INSPECTORS SIGNATURE: **WHEN CALLING FOR AN INSPECTION PLEASE HAVE PERMIT NUMBER READY. SEE NOTES ON REVERSE SIDE** 78495 CALLE TAMPICO, LA QUINTA, CA 92253 / 760-777-7000 / INSPECTION HOTLINE: 760-777-7131 INSPECTION NOTES 1. Sway bracing and hangers will be inspected at the time of rough piping inspection. 2. All required hydrostatic pressure tests shall maintain 200 psi for a 2-hour duration. (EX: Residential Fire Sprinkler Systems) 3. Fire sprinkler system remodels: if indicated on plans or this card, a hydrostatic pressure test shall be required. 4. All underground joints and thrusts blocks shall be exposed and readily visible during the hydrostatic test. 5. Contractor shall supply all testing equipment, access and operating instructions at time of test. 6. All systems shall be inspected, tested, and approved by a Fire Inspector before any work is started that may cause the affected system to be covered or hidden. POLICIES ON FIELD INSPECTIONS A. INSPECTION REQUESTS: Inspections are made subject to availability. Please have the permit number available when scheduling inspections. For City of La Quinta inspections call: (760) 777-7131. B. APPROVED PLANS: Shall be kept on the job site at all times that work is in progress. Work shall NOT commence without approved plans. C. INSPECTION REQUESTS: As required by the California Fire Code, the appropriate installing contractor shall be required to schedule the necessary inspections and be present on site for inspections. D. RE-INSPECTIONS: Will be charged against a permit when an inspection has failed, is not ready, the responsible party not on site or where previously noted corrections have not been completed. E. COMMODITIES: Unless otherwise noted on approved plans or letter of conditions, no commodities shall be entered into the structure until clearance has been granted by the Fire Dept and Building Official. F. OCCUPANCY: Buildings shall NOT be occupied by persons other than construction workers until a Final Fire Clearance has been granted by the Fire Dept and a Certificate for Occupancy has been issued by the Building Official. INSPECTION NOTES: THIS CARD IS REQURIED TO BE POSTED AT THE CONSTRUCTION SITE. THIS CARD AND APPROVED PLANS MUST BE AVAILABLE AT THE CONSTRUCTION SITE FOR ALL INSPECTIONS. THIS PERMIT SHALL EXPIRE AND BECOME NULL AND VOID IF THE WORK AUTHORIZED IS NOT COMMENCED WITHIN 180 DAYS OR IF THE WORK IS SUSPENDED OR ABANDONED FOR A PERIOD OF 180 DAYS OR MORE. THIS PERMIT IS FOR FIRE DEPARTMENT APPROVAL ONLY AND DOES NOT INTEND TO ABROGATE MORE RESTRICTIVE REQUIREMENTS OF OTHER AGENCIES HAVING RESPONSIBILITY.