Loading...
FCMP2021-0025 Andalusia Plan 401a u�tt Project Details PROJECT NUMBER ` =�w City of La Quinta FCMP2021-0025 MoFT�- Description: ANDALUSIA / FIRE MASTER PLAN / PLAN TYPE 401 Status: APPROVED Type: FIRE CONSTRUCTION MASTER PLAN (WEB) Status Date: Subtype: FIRE SPRINKLER MASTER PLAN Applied: 9/10/2021 Address: 59000 MADISON ST Approved: 9/27/2021 City, State, Zip: LA QUINTA,CA92253 Closed: Project Manager: Expired: Details: ADDITIONAL SITES CHRONOL DAYS REVIEWS ACTIONS INSPECTIONS CONDITIONS NAME TYPE NAME ADDRESSI CITY STATE ZIP PHONE FAX EMAIL APPLICANT SYMONS FIRE PROTECTION INC 12155 PAINE PL POWAY CA 92064 (619)588-6364 Angela@SYMONSFP.0 OM BILL TO SYMONS FIRE PROTECTION INC 12155 PAINE PL POWAY ca 92064 (619)588-6364 Angela@SYMONSFP.0 OM CONTRACTOR SYMONS FIRE PROTECTION INC 12155 PAINE PL POWAY CA 92064 (619)588-6364 Angela@SYMONSFP.0 OM OWNER T D DESERT DEV 81570 CARBONERAS I LA QUINTA CA 92253 1 (619)588-6364 nsparks@andalusiacc.c om •� ii • Printed: Friday, March 03, 2023 4:33:06 PM 1 of 4 CENTRALSOLIARE a u�tt Project Details PROJECT NUMBER ` =�w City of La Quinta FCMP2021-0025 MoFT�- CLTD DESCRIPTION ACCOUNT CITY AMOUNT PAID PAID DATE RECEIPT # CHECK # METHOD PAID BY BY FIRE STAFF - PER HOUR 101-0000-42420 1 $167.00 $167.00 6/20/22 WEB12245 6377173 227 CREDIT 682025 ECON FIRE STAFF - PER HOUR 101-0000-42420 1 $161.00 $161.00 9/27/21 WEB9421 6326674 994 CREDIT 682025 ECON Total Paid for FIRE FEES: $328.00 $328.00 632674778 PAYMENT OVER 101-0000-20330 0 $187.00 $187.00 9/27/21 R67000 22 CREDIT ANGELA ZUMAYA AMA COLLECTED W E B9419 FCMP2021- 0025 / PAYMENT OVER 101-0000-20330 0 $187.00 $187.00 10/25/21 R67468 ANGELA CREDIT ANGELA ZUMAYA AMA COLLECTED ZUMAYA / EEO Total Paid for PAYMENT OVER COLLECTED: $374.00 $374.00 RECORDS MANAGEMENT FEE - 101-0000-42416 0 $21.00 $21.00 9/27/21 WEB9421 632674994 CREDIT 682025 ECON 67 MAJOR Total Paid for RECORDS MANAGEMENT FEE - MAJOR: $21.00 $21.00 TECHNOLOGY 502-0000-43611 0 $5.00 $5.00 9/27/21 WEB9421 632674994 CREDIT 682025 ECON ENHANCEMENT FEE 67 Total Paid for TECHNOLOGY ENHANCEMENT FEE: $5.00 $5.00 • INSPECTION TYPE INSPECTOR SCHEDULED DATE COMPLETED RESULT REMARKS DATE NOTES REVIEW TYPE REVIEWER SENT DATE DUE DATE RETURNED STATUS REMARKS NOTES DATE Printed: Friday, March 03, 2023 4:33:06 PM 2 of 4 CENTRALSOLIARE a u�tt Project Details PROJECT NUMBER ` =�w City of La Quinta FCMP2021-0025 MoFT�- 1ST FIRE (2WK) KOHL HETRICK 9/10/2021 9/24/2021 9/27/2021 APPROVED SEE ATTACHMENTS 1ST PERMIT ARMANDO 9/10/2021 9/13/2021 9/13/2021 COMPLETE TECHNICIAN (1DAY) MAGALLON 2ND FIRE (1WK) KOHL 5/23/2022 5/30/2022 6/16/2022 APPROVED REVISED PLANS/CALCS HETRICK ' ■ i BOND INFORMATION Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED DOC 9/10/2021 Etrakit Contractor 1ST SUBMITTAL - PLAN 21-0642 ANDALUSIA 1 SET PLAN 401 F1.pdf DOC 9/10/2021 Etrakit Contractor 1ST SUBMITTAL - CALCS AREA 1 CALC.PDF 1 (AREA 1) DOC 9/10/2021 Etrakit Contractor 1ST SUBMITTAL - CALCS AREA 2 CALC.PDF 1 (AREA 2) DOC 9/10/2021 Etrakit Contractor 1ST SUBMITTAL - CALCS AREA 3 CALC.PDF 1 (AREA 3) DOC 9/10/2021 Etrakit Contractor 1ST SUBMITTAL - CUT REL FIRES SERIES I SHEETS SPRINKLERS.pdf DOC 9/10/2021 Etrakit Contractor 1ST SUBMITTAL - CUT REL RFC SERIES 1 SHEETS 2 SPRINKLERS.pdf DOC 9/10/2021 Etrakit Contractor APPLICATION ANDALUSIA 401 LOT 1 32.pdf 21-0642 ANDALUSIA DOC 5/23/2022 Etrakit Contractor as -built master plan PLAN 40105-11- 1 2022.pdf DOC 5/23/2022 Etrakit Contractor as -built calcs CALCS AS BUILT 401.pdf 1 FCMP2021-0025 - FCMP2021-0025 - DOC 9/27/2021 KOHL HETRICK APPROVED PLANS AND APPROVED PLANS AND 1 CALCS.pdf CALCS.pdf Printed: Friday, March 03, 2023 4:33:06 PM 3 of 4 CENTRALSOLIARE a u�tt Project Details PROJECT NUMBER ` =�w City of La Quinta FCMP2021-0025 MoFT�- Attachment Type CREATED OWNER DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED DOC 9/27/2021 KOHL HETRICK FCMP2021-0025 - COA FCMP2021-0025 - COA 1 LETTER.pdf LETTER.pdf FCMP2021-0025 - FCMP2021-0025 - DOC 6/16/2022 KOHL HETRICK REVISED APPROVED REVISED APPROVED 1 PLANS AND CALCS.pdf PLANS AND CALCS.pdf Printed: Friday, March 03, 2023 4:33:06 PM 4 of 4 CENTRALSQUARE PANTRY! F eoacHL Wk : III Iryf P RN OFF FOR CAL-1.1—ENVY STAMP C PRESSURE COURTYARD CALCULATED AT 86A�jWAS PER COAC"HEILSU WATER DISTRICT. RESIDUAL SYSTEM GREAT E. z ALLCOW IRTMENTS—HONEHEAD-13 ON—TSPACING.ALL THERROOMARE BASEDON 1­5FTSPACING. CALCULATIONSARE BPSEDON THE—T I CASE SCENARIO TWOHEA CALL ON 15 FTSPACING LJ wo P 4 N i.A I cAR I 777 0 _Uf s TaANSTiTOE� 0 lo LL < E L LABELED A..E..�PAMEL U 1 ILI oE 0 z 9 Lu o > ILI ALL TD'-0" FLAT CLG'S APPROVED Riv—idA C.nty Fi� D1p ft,,nt offig 0 La Quinta fth, Fin M—hal BY: Kohl Hetrick—=--- VICINITY MAP NTS­�. • I zwW 0 Lu s , I o W. GENERAL NOTES FIRE SAFETY SPECIALIST1­11 axrDxN M1111. ­­21­8 moral 1.P1-.EE­­L1.1.M .... RN. —El. �=L,.—.N.N11N­.T E.­E.1E­­NT­­E1T.1 N -11"IT11-1 T T. xwsorammrAO MO.— Oremances. Construction shall remain =.d -Fire I.. p.rp.­ until appmVaa nE DFWn1NxEm x�E eA _T o_ R­ mlxT.pD LINE .1 CEILINGREPRE CHANGEPERMIT UNDERGROUND DETAIL FCMP2021-0025 N.T.S. REZ11 17E.1TA11"E.1R1_11E 1=H F.RE.QIR.%,TL-H xxwL H aaTMewx.eN F_ ­�E 11. — ­­­ THAT H4VE 8— �A EDOUT6DE —E—To ­ . . 'N T. ==ER FIRE SPRINKLER & PIPING PLAN SCALE: 3/16"=1'_o" REMAINDER 11 ­P'1NG1ZE7r1R­T­RT1N 01 INDE—UNI. NF SPRINKLER ­EM DESIGN CRITERIA & F­ REQUIREMENTS. DE..N..1N.­REL. 1.] .—R —INK—F-1 P.., r— — H— .1 N&, I.W. GOLFCOURM Ise FZ DE"GNLIEIINIER NK 111 rostz 01 R 11L 21-11111,111 N RFL R1'NKLEZ L=R rl" R 111G11111,1 I ON11-11 I TENNIS 1— _�H"— R U LAUNDRY HALL WD BA 3 U_Aj'P,:AT.­E0,FR1­ 1H. _rL AT EX L1 M�P­T­Eorl­l 1H L 'p r 4 E1 I P' r 2. . SECTION A AS BUILT u. PN H...­UIDATE. AREA OF. So REMAINDER 71L '11-0642 SECTION N SCALE 1/4" = 11-01, SITE PLAN SCALE 1" = 200'-0" F1 F F1 Hydraulic Calculations for Project Name: Location: , , Drawinq Name: 21-0642 ANDALUSIA PLAN 401 Design Remote Area Number: Occupancy Classification Density Area of Application: Coverage per Sprinkler: Type of sprinklers calculated No. of sprinklers calculated: No. of nozzles calculated: In -rack Demand: Hose Streams: 1 Residentia AREA 1 0.10gpm/ft2 900ft2 (Actual 148ft2) 130ft2 Pendent 1 0 N/A gpm at Node: N/A 0.0 gpm at Node: 1 Type: 5.00 at Node: 5 Type: Total Water Required (including Hose Streams where applicable): From Water Supply at Node 1: 26.00 @ 76.108 Type of System: Volume of Dry/PreAction/Antifreeze/OtherAgent N/A Name of Contractor: Address: Phone Number: Name of designer: DEREK POWELL Authority Having Jurisdiction: Notes: Automatic peaking results Left: N/A Riqht: N/A Calculation Date: 5/11/2022 Allowance at Source Hose (Safety Margin = 10.255) L© M.E.P.CAD, Inc. �JJJAutoSPRINK 2020 06.3.9.0 1 5/11/202211:16:43AM Page 1 Job Name: Remote Area Number: 1 100 90 80 70 60 .N a 50 a� IL` 40 30 20 10 Hydraulic Graph N 1.85 Date: 5/11 /2022 Available Static 26.00 Pressure @ Supply 86.400 86.364 Water Supply Summary Sheet Node: 1 6.00 @ 76.108 500.00 @ 77.760 System demand curve LLI I I I I I I 400 500 600 700 Flow - gpm 800 900 III IIIII1 &@ M.E.P.CAD, Inc. �jjj AutoSPRINK 2020 v16.3.9.0 5/11/2022 11:16:44AM Page 2 Job Name: Remote Area Number: 1 100 90 80 70 60 .N a 50 a� IL` 40 30 20 10 Hydraulic Graph N 1.85 Date: 5/11 /2022 B.O.R. Summary Sheet Node: 6 Static Pressure 82.496 Available Supply 21.00 @ 64.848 21.00 86.364 21.00 @ 54.592 System demand curve 0 EL 111111111 04 8 12 16 20 24 28 Flow - gpm [cYa 36 40 &@ M.E.P.CAD, Inc. �jjj AutoSPRINK 2020 v16.3.9.0 5/11/2022 11:16:44AM Paqe 3 Gr Summary Of Outflowing Devices Job Number: Keportuescnption:KesiaenaaAKtA1 (1) Actual Flow Minimum Flow K-Factor Pressure Device pm pm K psi Hose 5 5.00 5.00 0 55.573 y Sprinkler 207 21.00 21.00 4.3 23.851 b Most Demanding Sprinkler Data L, © M.E.P.CAD, Inc. 111 AutoSPRINK 2020 06.3.9.0 5/11/2022 11:16:46AM Page 4 Job Name: Remote Area Number: 1 Date: 5/11 /2022 Supply Analysis Node Name Static (psi) Residual Flow (psi) co (gpm) Available Total Demand (psi) @ (gpm) Required Pressure (psi) 1 Water Supply 86.400 77.760 500.00 86.364 26.00 76.108 Node Analysis Node Number Elevation (Foot) Node Type Pressure at Node (psi) Discharge at Node (gpm) Notes 1 -8'-0 Supply 76.108 26.00 5 0'-6 55.573 5.00 207 10'-0 Sprinkler 23.851 21.00 2 -5'-0 71.460 3 -5'-0 59.380 4 -3'-0 57.788 6 1'-0 54.592 7 10'-7 47.946 68 10'-7 38.340 103 10'-7 46.613 LM © M.E.P.CAD, Inc. AN AutoSPRINK 2020 06.3.9.0 5/11/2022 11:16:49AM Paqe 5 Job Name: Remote Area Number: 1 Date: 5/11 /2022 Pipe Information Node 1 Elev 1 (Foot) K-Factor Flow added this step (q) Nominal ID Fittings & Devices . Equiv. Length (Foot) Length (Foot) C Factor Total(Pt) Notes Fitting/Device (Equivalent Length) Fixed Pressure Losses, when applicable, are added directly to (Pf) and shown as Fitting (Foot) pf Friction Loss Per Unit (psi) Elev(Pe) Node 2 Elev 2 (Foot) Total Flow (Q) Actual ID Total (Foot) Friction(Pf) 207 10'-0 4.3 21.00 % (See Notes) 41'-3'/z 150 23.851 ..... Route 1 Sprinkler, 5E(4'-0), T(3'-0) 23'-0 0.229253 -0.252 68 10'-7 21.00 0.8740 64'-3'/z 14.741 68 10'-7 % (See Notes) 57'-9 150 38.340 2E(4'-0), T(3'-0) 11'-0 0.120309 103 10'-7 14.82 0.8740 68' 9 8.272 103 10'-7 6.18 % (See Notes) 4'-10 150 46.613 Flow (q) from Route 2 b(1'-0) 1'-0 0.229253 7 10'-7 21.00 0.8740 5'-10 1.333 7 10'-7 1 (See Notes) 10'-6 150 47.946 2E(5'-0), 2f, 3Tr(1'-0), CV(5'-0), T(5'-0), B.O.R. 23'-0 0.074468 4.152 6 1'-0 21.00 1.1010 33'-6 2.494 6 1' 0 1 (See Notes) 0'-6 150 54.592 T(6'-9) 6-9 0.105499 0.217 5 0'-6 21.00 1.0250 7 3 0.764 5 0'-6 5.00 1 (See Notes) 3'-9'/2 150 55.573 cplg(0'-8) 0'-8 0.156619 1.517 4 -3'-0 26.00 1.0250 4'- 5'h 0.697 4 3' 0 2 (See Notes) 120'-0 150 57.788 cplg(1'-0) 1'-0 0.005996 0.867 3 -5'-0 26.00 2.0030 121'-0 0.726 3 -5-0 1 (See Notes) 0'-6 150 59.380 WMV(-12.000) 0.156619 2 -5'-0 26.00 1.0250 0 6 12.080 2 -5-0 1 (See Notes) 20'-0 150 71.460 EE(1'-4), S 1'-4 0.156619 1.303 1 -8'-0 26.00 1.0250 21'-4'/2 3.345 0.00 76.108 Hose Allowance At Source Total(Pt) Route 1 1 26.00 68 10'-7 14.82 '/, (See Notes) 272'-10 150 38.340 ..... Route 2 Flow (q) from Route 1 13E(4'-0), 6T(3'-0), 2cplg(1'-0), 2EE(1'-0) 74'-0 0.023850 103 10'-7 6.18 0.8740 ]4 6- 10 8.272 & © M.E.P.CAD, Inc. �jjj AutoSPRINK 2020 06.3.9.0 1 5/11/2022 11:16:51AM Page 6 Job Name: Remote Area Number: 1 Date: 5/11 /2022 Pipe Information Elev 1 Flow added Fittings & Length C Factor Total(Pt) Notes Node 1 (Foot) K-Factor this step Nominal ID Devices (Foot) Fitting/Device (Equivalent Fitting (Foot) pf Friction Elev(Pe) (q) Equiv. Length) Fixed Pressure Losses, Elev 2 Total Flow Loss Per Unit when applicable, are added Total Friction(Pf) Node 2 (Foot) (Q) Actual ID F oot) (Foot) ) (psi) directly to (Pf) and shown as (Foot) 46.613 I Total(Pt) Route 2 & © M.E.P.CAD, Inc. �jjj AutoSPRINK 2020 06.3.9.0 1 5/11/2022 11:16:51AM Page 7 Job Name: Remote Area Number: 1 Equivalent Pipe Lenoths of Valves and Fittinos (C=120 only) IC Value Multiplier Date: 5/11 /2022 Actual Inside Diameter 4.87 I Value Of C 100 130 140 150 = Factor Schedule 40 Steel Pipe Inside Diameter Multiplying Factor 0.713 1.16 1.33 1.51 ALV Alarm Valve AngV Angle Valve b Bushing BaIV Ball Valve BFP Back -flow Preventer BV Butterfly Valve C Cross Flow Turn 90' cplg Coupling Cr Cross Run CV Check Valve DeIV Deluge Valve DPV Dry Pipe Valve E 90' Elbow EE 45' Elbow Eel 11'/4' Elbow Ee2 22'/2' Elbow f Flow Device fd Flex Drop FDC Fire Department Connection fE 900 FireLock(TM) Elbow fEE 450 FireLock(TM) Elbow flg Flange FN Floating Node fT FireLock(TM) Tee g Gauge GloV Globe Valve GV Gate Valve Ho Hose Hose Hose HV Hose Valve Hyd Hydrant LtE Long Turn Elbow mecT Mechanical Tee Noz Nozzle P1 Pump In P2 Pump Out PIV Post Indicating Valve PO Pipe Outlet PrV Pressure Relief Valve PRV Pressure Reducing Valve red Reducer/Adapter S Supply sCV Swing Check Valve SFx Seismic Flex Spr Sprinkler St Strainer T Tee Flow Turn 90' Tr Tee Run U Union WirF Wirsbo WMV Water Meter Valve Z Cap & © M.E.P.CAD, Inc. �jjj AutoSPRINK 2020 06.3.9.0 1 5/11/2022 11:16:51AM Page 8 Hydraulic Calculations for Project Name: Location: , , Drawinq Name: 21-0642 ANDALUSIA PLAN 401 Design Remote Area Number: Occupancy Classification Density Area of Application: Coverage per Sprinkler: Type of sprinklers calculated No. of sprinklers calculated: No. of nozzles calculated: In -rack Demand: Hose Streams: I+ Residential AREA 2 0.10gpm/ft2 900ft2 (Actual 85ft2) 130ft2 Pendent 2 0 N/A gpm at Node: N/A 0.0 gpm at Node: 1 Type: 5.00 at Node: 5 Type: Total Water Required (including Hose Streams where applicable): From Water Supply at Node 1: 29.01 @ 77.160 Type of System: Volume of Dry/PreAction/Antifreeze/OtherAgent N/A Name of Contractor: Address: Phone Number: Name of designer: DEREK POWELL Authority Having Jurisdiction: Notes: Automatic peaking results Left: N/A Riqht: N/A Calculation Date: 5/11/2022 Allowance at Source Hose (Safety Margin = 9.195) L© M.E.P.CAD, Inc. �JJJAutoSPRINK 2020 06.3.9.0 2 5/11/202211:17:03AM Page 1 Job Name: Remote Area Number: 2 100 90 80 70 60 .N a 50 N Vl N IL` 40 30 20 10 Hydraulic Graph N 1.85 Date: 5/11 /2022 Available Static 29.01 Pressure @ Supply 86.400 86.355 Water Supply Summary Sheet Node: 1 -1 @ 77.160 500.00 @ 77.760 System demand curve 400 500 600 700 Flow - gpm 800 900 III IIIII1 &@ M.E.P.CAD, Inc. �jjj AutoSPRINK 2020 v16.3.9.0 5/11/2022 11:17:05AM Paqe 2 Hydraulic Graph Job Name: N 1.85 Remote Area Number: 2 Date: 5/11/2022 100 B.O.R. Summary Sheet 90 Node: 6 Static Pressure 82.496 80 70 Available Supply 24.01 @ 63.534 24.01 @ 86.355 60 y 24.01 @ 54.339 Oz50 a� a` 40 30 System demand curve 20 10 0 0 5 10 15 20 25 30 35 40 45 50 Flow - gpm &@ M.E.P.CAD, Inc. �jjj AutoSPRINK 2020 v16.3.9.0 5/11/2022 11:17:05AM Paqe 3 �(P Summary Of Outflowing Devices C t % Job Number: Report Description: Residential AREA 2 (2) Device Actual Flow pm Minimum Flow pm K-Factor K Pressure psi Hose 5 5.00 5.00 0 55.535 Sprinkler 201 12.01 12.00 4.3 7.805 y Sprinkler 205 12.00 12.00 4.3 7.788 b Most Demanding Sprinkler Data L, © M.E.P.CAD, Inc. 111 AutoSPRINK 2020 06.3.9.0 5/11/2022 11:17:06AM Page 4 Job Name: Remote Area Number: 2 Date: 5/11 /2022 Supply Analysis Node Name Static (psi) Residual Flow (psi) co (gpm) Available Total Demand (psi) @ (gpm) Required Pressure (psi) 1 Water Supply 86.400 77.760 500.00 86.355 29.01 77.160 Node Analysis Node Number Elevation (Foot) Node Type Pressure at Node (psi) Discharge at Node (gpm) Notes 1 -8'-0 Supply 77.160 29.01 5 0'-6 55.535 5.00 201 8'-0 Sprinkler 7.805 12.01 205 10'-0 Sprinkler 7.788 12.00 2 -5'-0 71.760 3 -5'-0 59.662 4 -3'-0 57.906 6 1'-0 54.339 7 10'-7 46.990 19 10'-7 8.279 68 10'-7 34.681 LM © M.E.P.CAD, Inc. AN AutoSPRINK 2020 06.3.9.0 5/11/2022 11:17:09AM Paqe 5 Job Name: Remote Area Number: 2 Date: 5/11 /2022 Pipe Information Node 1 Elev 1 (Foot) K-Factor Flow added this step (q) Nominal ID Fittings & Devices . Equiv. Length (Foot) Length (Foot) C Factor Total(Pt) Notes Fitting/Device (Equivalent Length) Fixed Pressure Losses, when applicable, are added directly to (Pf) and shown as Fitting (Foot) pf Friction Loss Per Unit (psi) Elev(Pe) Node 2 Elev 2 (Foot) Total Flow (Q) Actual ID Total (Foot) Friction(Pf) 205 10'-0 4.3 12.00 % (See Notes) 2'-1'/2 150 7.788 ..... Route 1 Sprinkler, E(4'-0), T(3'-0) 7'-0 0.081413 -0.252 19 10'-7 12.00 0.8740 9'-1'/2 0.743 19 10'-7 12.01 % (See Notes) 63'-10'/2 150 8.279 Flow (q) from Route 2 5E(4'-0), 2T(3'-0) 26'-0 0.293798 68 10'-7 24.01 0.8740 r89'-10'/2 26.401 68 10'-7 3/, (See Notes) 57'-9 150 34.681 2E(4'-0), T(3'-0) 11'-0 0.154182 103 10'-7 16.95 0.8740 68'-9 10.601 103 10'-7 7.07 % (See Notes) 4'-10 150 45.282 Flow (q) from Route 3 b(1 0) 1'-0 0.293798 7 10'-7 24.01 0.8740 5'-10 1.709 7 10' 7 1 (See Notes) 10'-6 150 46.990 2E(5'-0), 2f, 3Tr(1'-0), CV(5'-0), T(5'-0), B.O.R. 23'-0 0.095434 4.152 6 1'-0 24.01 1.1010 33'-6 3.196 6 1'-0 1 (See Notes) 0'-6 150 54.339 T(6'-9) 6-9 0.135202 0.217 5 0'-6 24.01 1.0250 7 3 0.980 5 0' 6 5.00 1 (See Notes) 3'-9'/2 150 55.535 cplg(0'-8) 0'-8 0.191846 1.517 4 -3'-0 29.01 1.0250 4'- 5'h 0.854 4 -T-0 2 (See Notes) 120'-0 150 57.906 cplg(1'-0) 1'-0 0.007345 0.867 3 -5'-0 29.01 2.0030 121'-0 0.889 3 50 1 (See Notes) 0'-6 150 59.662 WMV(-12.000) 0.191846 2 -5'-0 29.01 1.0250 0 6 12.097 2 -5'-0 1 (See Notes) 20'-0 150 71.760 EE(1'-4), S 1'-4 0.191846 1.303 1 -8'-0 29.01 1.0250 21'-4'/2 4.098 0.00 77.160 Hose Allowance At Source Total(Pt) Route 1 1 29.01 & © M.E.P.CAD, Inc. �jjj AutoSPRINK 2020 06.3.9.0 2 5/11/2022 11:17:11AM Page 6 Job Name: Remote Area Number: 2 Date: 5/11 /2022 Pipe Information Elev 1 Flow added Fittings & Length C Factor Total(Pt) Notes Node 1 (Foot) K-Factor this step Nominal ID Devices (Foot) Fitting/Device (Equivalent Fitting (Foot) pf Friction Elev(Pe) (q) Equiv. Length) Fixed Pressure Losses, Elev 2 Total Flow Loss Per Unit when applicable, are added Total Friction(Pf) Node 2 (Foot) (Q) Actual ID F oot) (Foot) ) (psi) directly to (Pf) and shown as (Foot) 201 8'-0 4.3 12.01 '/, (See 11'-6'/z 150 7.805 ••••• Route 2••••• Sprinkler, 8'-0 -1.119 Notes) 19 10'-7 12.01 0.8740 0.081581 2E(4'-0) 19'-6'/z 1.593 8.279 Total(Pt) Route 2 68 10'-7 16.95 % (See 272'-10 150 34.681 ..... Route 3 Flow (q) from Route 1 74'-0 Notes) 103 10'-7 7.07 0.8740 0.030565 13E(4'-0), 6T(3'-0), 2cplg(1'-0), 346'-10 10.601 2EE(1'-0) 45.282 Total(Pt) Route 3 & © M.E.P.CAD, Inc. �jjj AutoSPRINK 2020 06.3.9.0 2 5/11/2022 11:17:11AM Page 7 Job Name: Remote Area Number: 2 Equivalent Pipe Lenoths of Valves and Fittinos (C=120 only) IC Value Multiplier Date: 5/11 /2022 Actual Inside Diameter 4.87 I Value Of C 100 130 140 150 = Factor Schedule 40 Steel Pipe Inside Diameter Multiplying Factor 0.713 1.16 1.33 1.51 ALV Alarm Valve AngV Angle Valve b Bushing BaIV Ball Valve BFP Back -flow Preventer BV Butterfly Valve C Cross Flow Turn 90' cplg Coupling Cr Cross Run CV Check Valve DeIV Deluge Valve DPV Dry Pipe Valve E 90' Elbow EE 45' Elbow Eel 11'/4' Elbow Ee2 22'/2' Elbow f Flow Device fd Flex Drop FDC Fire Department Connection fE 900 FireLock(TM) Elbow fEE 450 FireLock(TM) Elbow flg Flange FN Floating Node fT FireLock(TM) Tee g Gauge GloV Globe Valve GV Gate Valve Ho Hose Hose Hose HV Hose Valve Hyd Hydrant LtE Long Turn Elbow mecT Mechanical Tee Noz Nozzle P1 Pump In P2 Pump Out PIV Post Indicating Valve PO Pipe Outlet PrV Pressure Relief Valve PRV Pressure Reducing Valve red Reducer/Adapter S Supply sCV Swing Check Valve SFx Seismic Flex Spr Sprinkler St Strainer T Tee Flow Turn 90' Tr Tee Run U Union WirF Wirsbo WMV Water Meter Valve Z Cap & © M.E.P.CAD, Inc. �jjj AutoSPRINK 2020 06.3.9.0 2 5/11/2022 11:17:11AM Page 8 Hydraulic Calculations for Project Name: Location: , , Drawinq Name: 21-0642 ANDALUSIA PLAN 401 Design Remote Area Number: Occupancy Classification Density Area of Application: Coverage per Sprinkler: Type of sprinklers calculated No. of sprinklers calculated: No. of nozzles calculated: In -rack Demand: Hose Streams: 3 Residential AREA 3 0.10gpm/ft2 900ft2 (Actual 283ft2) 130ft2 Pendent 2 0 N/A gpm at Node: N/A 0.0 gpm at Node: 1 Type: 5.00 at Node: 5 Type: Total Water Required (including Hose Streams where applicable): From Water Supply at Node 1: 29.02 @ 59.044 Type of System: Volume of Dry/PreAction/Antifreeze/OtherAgent N/A Name of Contractor: Address: Phone Number: Name of designer: DEREK POWELL Authority Having Jurisdiction: Notes: Automatic peaking results Left: N/A Right: 58.010 Calculation Date: 5/11/2022 Allowance at Source Hose (Safety Margin = 27.312) L© M.E.P.CAD, Inc. �JJJAutoSPRINK 2020 06.3.9.0 3 5/11/202211:18:01AM Page 1 Hydraulic Graph Job Name: N 1.85 Remote Area Number: 3 Date: 5/11/2022 100 Water Supply Summary Sheet 90 Available Supply Node: 1 Static Pressure 86.400 29.02 @ 86.355 80 500.00 @ 77.760 70 60 29.02 @ 59.0 .N a 50 a� a` 40 System demand curve 30 20 10 0 0100 200 300 400 500 600 700 800 900 1000 Flow - gpm �M © M.E.P.CAD, Inc. AutoSPRINK 2020 06.3.9.0 5/11/2022 11:18:03AM Page 2 Hydraulic Graph Job Name: N 1.85 Remote Area Number: 3 Date: 5/11/2022 100 B.O.R. Summary Sheet 90 Node: 6 Static Pressure 82.496 80 70 Available Supply 24.02 @ 63.529 24.02 @ 86.355 60 .N a 50 a� a` 40 24.02 @ 36.217 /001 30 System demand curve 20 10 /00 0 5 10 15 20 25 30 35 40 45 50 Flow - gpm &@ M.E.P.CAD, Inc. �jjj AutoSPRINK 2020 v16.3.9.0 5/11/2022 11:18:03AM Paqe 3 Gr Summary Of Outflowing Devices Job Number: Keport uescripaon: Kesiaentiai AKtA s (s) Device Actual Flow pm Minimum Flow pm K-Factor K Pressure psi Hose 5 5.00 5.00 0 37.415 y Sprinkler 317 12.01 12.01 4.3 7.800 Sprinkler 320 12.01 12.01 4.3 7.807 b Most Demanding Sprinkler Data L, © M.E.P.CAD, Inc. 111 AutoSPRINK 2020 06.3.9.0 5/11/2022 11:18:04AM Page 4 Job Name: Remote Area Number: 3 Date: 5/11 /2022 Supply Analysis Node Name Static (psi) Residual Flow (psi) co (gpm) Available Total Demand (psi) @ (gpm) Required Pressure (psi) 1 Water Supply 86.400 77.760 500.00 86.355 29.02 59.044 Node Analysis Node Number Elevation (Foot) Node Type Pressure at Node (psi) Discharge at Node (gpm) Notes 1 -8'-0 Supply 59.044 29.02 5 0'-6 37.415 5.00 317 13'-0 Sprinkler 7.800 12.01 320 13'-0 Sprinkler 7.807 12.01 2 -5'-0 53.640 3 -5'-0 41.543 4 -3'-0 39.786 6 1'-0 36.217 7 10'-7 28.866 57 13'-7 8.948 103 10'-7 27.156 LM © M.E.P.CAD, Inc. AN AutoSPRINK 2020 06.3.9.0 5/11/2022 11:18:07AM Page 5 Job Name: Remote Area Number: 3 Date: 5/11 /2022 Pipe Information Node 1 Elev 1 (Foot) K-Factor Flow added this step (q) Nominal ID Fittings & Devices . Equiv. Length (Foot) Length (Foot) C Factor Total(Pt) Notes Fitting/Device (Equivalent Length) Fixed Pressure Losses, when applicable, are added directly to (Pf) and shown as Fitting (Foot) pf Friction Loss Per Unit (psi) Elev(Pe) Node 2 Elev 2 (Foot) Total Flow (Q) Actual ID Total (Foot) Friction(Pf) 317 13'-0 4.3 12.01 % (See Notes) 10'-2 150 7.800 ..... Route 1 Sprinkler, E(4'-0), C(3'-0) 7'-0 0.081529 -0.252 57 13'-7 12.01 0.8740 17'-2 1.399 57 13W % (See Notes) 149'-1'/2 150 8.948 9E(4'-0), 3T(3'-0), 2EE(1'-0) 47'-0 0.086218 1.301 103 10'-7 12.38 0.8740 r196'-1'/2 16.908 103 10'-7 11.65 % (See Notes) 4'-10 150 27.156 Flow (q) from Route 2 b(1'-0) 1'-0 0.294040 7 10'-7 24.02 0.8740 5'-10 1.710 7 10'-7 1 (See Notes) 10'-6 150 28.866 2E(5'-0), 2f, 3Tr(1'-0), CV(5'-0), T(5'-0), B.O.R. 23'-0 0.095513 4.152 6 1'-0 24.02 1.1010 33'-6 3.199 6 1' 0 1 (See Notes) 0'-6 150 36.217 T(6'-9) 6-9 0.135314 0.217 5 0'-6 24.02 1.0250 7 3 0.980 5 0'-6 5.00 1 (See Notes) 3'-9'/2 150 37.415 cplg(0'-8) 0'-8 0.191977 1.517 4 -3'-0 29.02 1.0250 4'- 5'h 0.854 4 3' 0 2 (See Notes) 120'-0 150 39.786 cplg(1'-0) 1'-0 0.007350 0.867 3 -5'-0 29.02 2.0030 121'-0 0.889 3 -5-0 1 (See Notes) 0'-6 150 41.543 WMV(-12.000) 0.191977 2 -5'-0 29.02 1.0250 0 6 12.098 2 -5-0 1 (See Notes) 20'-0 150 53.640 EE(1'-4), S 1'-4 0.191977 1.303 1 -8'-0 29.02 1.0250 21'-4'/2 4.100 0.00 59.044 Hose Allowance At Source Total(Pt) Route 1 1 29.02 320 13'-0 4.3 12.01 '/, (See Notes) 6-0'/2 150 7.807 ..... Route 2 Sprinkler, 2E(4'-0), C(3'-0) 11'-0 0.081600 -0.252 57 IT-7 12.01 0.8740 17'-0%2 1.392 & © M.E.P.CAD, Inc. �jjj AutoSPRINK 2020 06.3.9.0 3 5/11/2022 11:18:09AM Page 6 Job Name: Remote Area Number: 3 Date: 5/11 /2022 Pipe Information Elev 1 Flow added Fittings & Length C Factor Total(Pt) Notes Node 1 (Foot) K-Factor this step Nominal ID Devices (Foot) Fitting/Device (Equivalent Fitting (Foot) pf Friction Elev(Pe) (q) Equiv. Length) Fixed Pressure Losses, Elev 2 Total Flow Loss Per Unit when applicable, are added Total Friction(Pf) Node 2 (Foot) (Q) Actual ID F oot) (Foot) ) (psi) directly to (Pf) and shown as (Foot) 57 13' 7 12.38 '/, (See 181'-6 150 8.948 Flow (q) from Route 1 38'-0 1.301 Notes) 103 10'-7 11.65 0.8740 0.077030 4T(3'-0), 2cplg(1'-0), 6E(4'-0) 219'-6 16.908 27.156 Total(Pt) Route 2 & © M.E.P.CAD, Inc. �jjj AutoSPRINK 2020 06.3.9.0 3 5/11/2022 11:18:09AM Page 7 Job Name: Remote Area Number: 3 Equivalent Pipe Lenoths of Valves and Fittinos (C=120 only) IC Value Multiplier Date: 5/11 /2022 Actual Inside Diameter 4.87 I Value Of C 100 130 140 150 = Factor Schedule 40 Steel Pipe Inside Diameter Multiplying Factor 0.713 1.16 1.33 1.51 ALV Alarm Valve AngV Angle Valve b Bushing BaIV Ball Valve BFP Back -flow Preventer BV Butterfly Valve C Cross Flow Turn 90' cplg Coupling Cr Cross Run CV Check Valve DeIV Deluge Valve DPV Dry Pipe Valve E 90' Elbow EE 45' Elbow Eel 11'/4' Elbow Ee2 22'/2' Elbow f Flow Device fd Flex Drop FDC Fire Department Connection fE 900 FireLock(TM) Elbow fEE 450 FireLock(TM) Elbow flg Flange FN Floating Node fT FireLock(TM) Tee g Gauge GloV Globe Valve GV Gate Valve Ho Hose Hose Hose HV Hose Valve Hyd Hydrant LtE Long Turn Elbow mecT Mechanical Tee Noz Nozzle P1 Pump In P2 Pump Out PIV Post Indicating Valve PO Pipe Outlet PrV Pressure Relief Valve PRV Pressure Reducing Valve red Reducer/Adapter S Supply sCV Swing Check Valve SFx Seismic Flex Spr Sprinkler St Strainer T Tee Flow Turn 90' Tr Tee Run U Union WirF Wirsbo WMV Water Meter Valve Z Cap & © M.E.P.CAD, Inc. �jjj AutoSPRINK 2020 06.3.9.0 3 5/11/2022 11:18:09AM Page 8 Bulletin 006 September 2020 Reliable Features cULus Listed as Residential Sprinklers Push -On cover plate installation Low water flow requirements Product Description Model RFC Series residential sprinklers are flat cover plate, concealed pendent sprinklers intended for installation in accordance with NFPA 13, NFPA 13R, or NFPA 13D. The sprinklers are cULus Listed as Residential Sprinklers in ac- cordance with UL 1626. In addition, Model RFCLL Series sprinklers are cULus Certified for Health Effects to NSF/ANSI standard 61 Annex G (LL) and Australian WaterMark Certified (WMCS). Model RFC30 sprinklers have a 1650F (74°C) temperature rated fusible -link operating element. Model RFC43, RFC49, RFC58, and RFC76 sprinklers are offered with either a 1650F (74°C) or 212OF (100°C) temperature rated fusible -link oper- ating element. Sprinklers with a 1650F (74°C) temperature rating are ordinary temperature classification and are listed for use with a 1350F (57°C) temperature rated cover plate. Sprinklers with a 212OF (100°C) temperature rating are inter- mediate temperature classification and are listed for use with a 1650F (74°C) temperature rated cover plate. Model RFC Series sprinklers are installed with a Model RFC or Model G5 Cover Plate. Model G5 Cover Plates may be installed by either pushing or threading the cover plate into the sprinkler cup. Model RFC30, RFC30LL, RFC43, RFC43LL, RFC49 and RFC49LL sprinklers allow 1/2" (13 mm) of cover plate adjustment. Model RFC58 and RFC76 sprinklers allow 3/4" (19 mm) of cover plate adjustment. Model RFC and G5 Cover Plates are available in a variety of finishes as listed in Table H. Model RFC Series Residential Sprinklers Flat Concealed Pendent Model RFC30 & RFC30LL Model RFC49 & RFC49LL Model RFC76 cULus Listed Model RFC43 & RFC43LL Model RFC58 )M Model RFC & G5 Cover Plate Sprinkler Model p Nominal K-Factor gpm/psi12 (1/min/bar12) Max. Coverage Area ft x ft (m x m) Listings & Approvals Sprinkler Identification Number (SIN) RFC30 3.0(43) 14 x 14 (4.3 x 4.3) cULus RA0611 RFC30LL 3.0(43) 14 x 14 (4.3 x 4.3) cULus, LL, WMCS RA3211 RFC43 4.3(62) 20 x 20 (6.1 x 6.1) cULus RA0612 RFC43LL 4.3(62) 20 x 20 (6.1 x 6.1) cULus, LL, WMCS RA3212 RFC49 4.9(71) 20 x 20 (6.1 x 6.1) cULus RA0616 RFC49LL 4.9(71) 20 x 20 (6.1 x 6.1) cULus, LL, WMCS RA3216 RFC58 5.8(84) 20 x 20 (6.1 x 6.1) cULus RA0613 RFC76 7.6(109) 20 x 20 (6.1 x 6.1) cULus RA0618 cULus: cULus Listed to UL1626, Residential Sprinklers for Fire Protection Service. LL: cULus Certified for Health Effects to NSF/ANSI Standard 61 Annex G (Less than 0.25% Lead content). WMCS: Australian WaterMark Certified. www.reliablesprinkler.com Technical Specifications Style: Flat Concealed Pendent Threads: 1/2" NPT or ISO 7-1 R1/2 Nominal K-Factor: 3.0 (43 metric) Max. Working Pressure: 175 psi (12 bar) Min. Spacing: 8 ft. (2.4 m) Material Specifications Thermal Sensor: Nickel Alloy Solder Link Sprinkler Body: Brass Alloy Levers: Bronze Alloy Yoke: Brass Alloy Sealing Assembly: Nickel Alloy with PTFE Load Screw: Bronze Alloy Towers: Copper Alloy Pins: Stainless Steel Deflector: Bronze Alloy Cup: Steel Cover Plate Finishes (See Table H) Sensitivity Fast -response Temperature Rating 165°F (74°C) sprinkler 135°F (57°C) cover plate Cover Plate Model RFC Cover Plate Model G5 Cover Plate Sprinkler Wrench Model FC (without wrench -able cap) Model W3 (with wrench -able cap) Listings and Approvals cULus Listed to UL 1626 cULus Certified for Health Effects to NSF/ANSI Standard 61 Annex G (RFC30LL only) Watermark Certified (RFC30LL only) Model RFC30 & RFC30LL Sprinkler Components and Dimensions Body Cup Towe Fusible Li Deflector (retr Pin (exten Deflector (exter 1-3/4" (44 mm) +/- 1/4" (6 mm) Nominal face of fitting to ceiling Model G4/G5 Cover Plate Model RFC30 and RFC30LL Sprinkler Hydraulic Design Criteria Bottom View 2-5/16" (58 mm) Dia. 3-5/16" (84 mm) Dia. �3/16"(5mm) Ceiling Minimum Flow and Residual Pressure Max. Coverage Area (2) Flow Pressure ft. x ft. gpm psi (m x m) (1/min) (bar) 12 x 12 9 9.0 (3.6 x 3.6) (34) (0.62) 14 x 14 10 11.0 (4,3 x 4.3) (38) (0.76) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in Table B above and (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. Bulletin 006 Reliable Page 2 of 8 September 2020 www.reliablesprinkler.com Technical Specifications Style: Flat Concealed Pendent Threads: 1/2" NPT or ISO 7-1 R1/2 Nominal K-Factor: 4.3 (62 metric) Max. Working Pressure: 175 psi (12 bar) Min. Spacing: 8 ft. (2.4 m) Material Specifications Thermal Sensor: Nickel Alloy Solder Link Sprinkler Body: Brass Alloy Levers: Bronze Alloy Yoke: Brass Alloy Sealing Assembly: Nickel Alloy with PTFE Load Screw: Bronze Alloy Towers: Copper Alloy Pins: Stainless Steel Deflector: Bronze Alloy Cup: Steel Sensitivity Fast -response Temperature Rating Ordinary: 165°F (74°C) sprinkler 135°F (57°C) cover plate Intermediate: 212°F (100°C) sprinkler 165°F (74°C) cover plate Cover Plate Model RFC Cover Plate Model G5 Cover Plate Sprinkler Wrench Model FC (without wrench -able cap) Model W3 (with wrench -able cap) Cover Plate Finishes Listings and Approvals (See Table H) cULus Listed to UL 1626 cULus Certified for Health Effects to NSF/ANSI Standard 61 Annex G (RFC43LL only) Watermark Certified (RFC43LL only) Model RFC43 & RFC43LL Sprinkler Components and Dimensions Body Cup Towe Fusible Li Deflector (retry Pin (exter Deflector (extenc 1-3/4" (44 mm) +/- 1/4" (6 mm) Nominal face of fitting to ceiling Model G4/G5 Cover Plate Model RFC43 & RFC43LL Sprinkler Hydraulic Design Criteria r Bottom View , 2-5/16" (58 mm) Dia. 3-5/16" (84 mm) Dia. 3/16" (5 mm) Ceiling Minimum Flow and Residual Pressure 0) Max. Coverage Area (2) Ordinary Temperature Intermediate Temperature Flow Pressure Flow Pressure ft. x ft. (m x m) gpm psi gpm psi (1/min) (bar) (1/min) (bar) 15 x 15 12 7.8 12 7.8 (4.6 x 4.6) (45) (0.54) (45) (0.54) 16 x 16 13 9.1 13 9.1 (4.9 x 4.9) (49) (0.63) (49) (0.63) 18 x 18 18 17.5 (5.5 x 5.5) (68) (1.21) 20 x 20 21 23.8 (6.1 x 6.1) (79) (1.64) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in Table C above and (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. Bulletin 006 Reliable Page 3 of 8 September 2020 www.reliablesprinkler.com Technical Specifications Style: Flat Concealed Pendent Threads: 1/2" NPT or ISO 7-1 R1/2 Nominal K-Factor: 4.9 (71 metric) Max. Working Pressure: 175 psi (12 bar) Min. Spacing: 8 ft. (2.4 m) Material Specifications Thermal Sensor: Nickel Alloy Solder Link Sprinkler Body: Brass Alloy Levers: Bronze Alloy Yoke: Brass Alloy Sealing Assembly: Nickel Alloy with PTFE Load Screw: Bronze Alloy Towers: Copper Alloy Pins: Stainless Steel Deflector: Bronze Alloy Cup: Steel Sensitivity Fast -response Temperature Rating Ordinary: 165°F (74°C) sprinkler 135°F (57°C) cover plate Intermediate: 212°F (100°C) sprinkler 165°F (74°C) cover plate Cover Plate Model G5 Cover Plate Sprinkler Wrench Model FC (without wrench -able cap) Model W3 (with wrench -able cap) Cover Plate Finishes Listings and Approvals cULus Listed to UL 1626 (See Table H) cULus Certified for Health Effects to NSF/ANSI Standard 61 Annex G (RFC49LL only) Watermark Certified (RFC49LL onlv) Model RFC49 & RFC49LL Sprinkler Components and Dimensions i nrei Body Cup Towe Fusible L Deflector (retn Pin (extei Deflector (extent Bottom View 2-5/16" (58 mm) Dia. 1 1-3/4" (44 mm) +/- 1/4" (6 mm) Nominal face of fitting to ceiling �3/16"(5mm) Model G4/G5 Cover Plate 3-5/16" (84 mm) Dia. -1 \ Ceiling Model RFC49 & RFC49LL Sprinkler Hydraulic Design Criteria Minimum Flow and Residual PressureM Max. Coverage Area(') Ordinary Temperature Intermediate Temperature Flow Pressure Flow Pressure ft. x ft. (m x m) gpm psi gpm psi (1/min) (bar) (1/min) (bar) 16 x 16 13 7.0 13 7.0 (4.9 x 4.9) (49.0) (0.48) (49.0) (0.48) 18 x 18 17 12.0 17 12.0 (5.5 x 5.5) (64.3) (0.83) (64.3) (0.83) 20 x 20 20 16.7 21 18.4 (6.1 x6.1) (75.7) (1.15) (79.5) (1.27) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in Table D above and (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. Bulletin 006 Reliable Page 4 of 8 September 2020 www.reliablesprinkler.com Technical Specifications Style: Flat Concealed Pendent Threads: 1/2" NPT or ISO 7-1 R1/2 Nominal K-Factor: 5.8 (84 metric) Max. Working Pressure: 175 psi (12 bar) Min. Spacing: 8 ft. (2.4 m) Material Specifications Thermal Sensor: Nickel Alloy Solder Link Sprinkler Body: Brass Alloy Levers: Bronze Alloy Yoke: Brass Alloy Sealing Assembly: Nickel Alloy with PTFE Load Screw: Bronze Alloy Towers: Copper Alloy Pins: Stainless Steel Deflector: Chrome Plated Bronze Alloy Cup: Steel Cover Plate Finishes (See Table H) Sensitivity Fast -response Temperature Ratings Ordinary: 165°F (74°C) sprinkler 135°F (57°C) cover plate Intermediate: 212°F (100°C) sprinkler 165°F (74°C) cover plate Cover Plate Model G5 Cover Plate Sprinkler Wrench Model FC (without wrench -able cap) Model W3 (with wrench -able cap) Listings and Approvals cULus Listed Model RFC58 Sprinkler Components and Dimensions Thre - Body Cup Towe Fusible Li Deflector (retr< Pin (exter Deflector (extenc 1-7/8" (48 mm) +/- 3/8" (9 mm) Nominal face of fitting to ceiling Model G4/G5 Cover Plate Model RFC58 Sprinkler Hydraulic Design Criteria Bottom View 2-5/16" (58 mm) Di a. 3-5/16" (84 mm) Dia. 3/16" (5 mm) Ceiling Minimum Flow and Residual Pressures') Max. Coverage Area s2s Flow Pressure ft. x ft. gpm psi (m x m) (1/min) (bar) 16 x 16 16 7.6 (4.9 x 4.9) (60.6) (0.53) 18 x 18 18 9.6 (5.5 x 5.5) (68.1) (0.66) 20 x 20 20 11.9 (6.1 x 6.1) (75.7) (0.82) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in Table E above and (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. Bulletin 006 Reliable Page 5 of 8 September 2020 www.reliablesprinkler.com Technical Specifications Style: Flat Concealed Pendent Threads: 3/4" NPT or ISO 7-1 R3/4 Nominal K-Factor: 7.6 (109 metric) Max. Working Pressure: 175 psi (12 bar) Min. Spacing: 8 ft. (2.4 m) Material Specifications Thermal Sensor: Nickel Alloy Solder Link Sprinkler Body: Brass Alloy Levers: Bronze Alloy Yoke: Brass Alloy Sealing Assembly: Nickel Alloy with PTFE Load Screw: Bronze Alloy Towers: Copper Alloy Pins: Stainless Steel Deflector: Bronze Alloy Cup: Steel Cover Plate Finishes (See Table H) Sensitivity Fast -response Temperature Ratings Ordinary: 165°F (74°C) sprinkler 135°F (57°C) cover plate Intermediate: 212°F (100°C) sprinkler 165°F (74°C) cover plate Cover Plate Model G5 Cover Plate Sprinkler Wrench Model FC (without wrench -able cap) Model W3 (with wrench -able cap) Listings and Approvals cULus Listed Model RFC76 Sprinkler Components and Dimensions Thres Body Cup Towei Fusible Li Deflector (retry Pin (exten Deflector (extend /o Bottom View ti 2-5/16" (58 mm) Dia. 1-7/8" (48 mm) +/ 3/8" (9 mm) Nominal face of fitting to ceiling Model G4/G5 Cover Plate Model RFC76 Flat Concealed Sprinkler Hydraulic Design Criteria 3-5/16" (84 mm) Dia. 3/16" (5 mm) Ceiling Minimum Flow and Residual Pressure(') Max. Coverage Area (2) Flow Pressure ft. x ft. gpm psi (m x m) (1/min) (bar) 16 x 16 21 7.6 (4.9 x 4.9) (79.5) (0.52) 18 x 18 24 9.9 (5,5 x 5.5) (90.8) (0.68) 20 x 20 34 20 (6,1 x 6.1) (128.7) (1.4) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in Table E above and (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. Bulletin 006 Reliable Page 6 of 8 September 2020 www.reliablesprinkler.com Cover Plate Finishes(') Standard Finishes Special Application Finishes White Polyester Off White Paint Black Paint Raw Brass Chrome Plated Bright Brass Finished Bronze Black Plated Satin Chrome Stainless Steel Clad (3) Custom Color Paint(2) Notes: 1. Paint or any other coating applied over the factory finish will void all approvals and warranties. 2. Custom color paint is semi -gloss, unless specified otherwise. 3. Stainless steel clad cover plates are Type 316 Stainless Steel on the finished side and C102 Copper Allow on the backside. Cover plates are not listed or approved as corrosion resistant. Installation Dimensions Recommended Min. to Min. to Max. Sprinkler Cover Cover Plate Hole Diameter Cover Plate Max. Face Dropped Deflector Cover Plate Model Plate Diameter in Ceiling Adjustment of Fitting to Distance below Temperature Model inch (mm) inch (mm) inch (mm) Ceilings') Ceiling Rating inch (mm) inch (mm) RFC30, RFC or 3-5/16 2-5/8 1/2 1-1/2 to 2 1/2 to 1 1350F RFC30LL G5 (84) (67) (13) (38 to 51) (13 to 25) (57°C) RFC43, 1350F(2) RFC43LL, RFC or 3-5/16 2-5/8 1/2 1-1/2 to 2 1/2 to 1 (57°C) RFC49, G5 (84) (67) (13) (38 to 51) (13 to 25) or 1650F(3) RFC49LL (74°C) 1350F(2) RFC58, RFC or 3-5/16 2-5/8 3/4 1-1/2 to 2-1/4 1/4 to 1 (57°C) RFC76 G5 (84) (67) (19) (38 to 57) (6 to 25) or 165°F(3) (74°C) Notes: 1. Face of fitting to ceiling dimensions are based on a nominal thread make up. Verify dimensions based on fitting and thread sealing method prior to installation. A 1/2" x 1/2" brass nipple extension (Reliable P/N 6999991900) is available where necessary for replacement of existing sprinklers. 2. For use with 165°F (74°C) temperature rated sprinklers where the Maximum Ceiling Temperature does not exceed 100°F (38°C). 3. For use with 212°F (100°C) temperature rated sprinklers where the Maximum Ceiling Temperature does not exceed 150°F (66°C). Installation Model RFC series sprinklers are intended to be installed in accordance with NFPA 13, NFPA 13R, or NFPA 13D, as well as the requirements of applicable authorities having jurisdiction. Model RFC series sprinklers must not be installed in ceilings with positive pressure in the space above. Ensure that the 4 slots in the cup are open and unobstructed following installation. Model RFC series sprinklers are shipped with a wrench -able protective cap that should remain on the sprinkler until the sprinkler system is placed in service following construction. Model RFC series sprinklers can be installed without removing the wrench -able protective cap using the Model W3 wrench. Alternatively, Model RFC series sprinklers can be installed using the Model FC wrench by temporarily removing the protective cap during installation of the sprinkler. The use of any other wrench to installed Model RFC series sprinklers is not permitted and may damage the sprinkler. Fully insert the Model W3 wrench over the cap until it reaches the bottom of the cup, or the Model FC wrench over the sprinkler until the wrench engages the body. Do not wrench any other part of the sprinkler/cup assembly. The Model W3 and FC wrenches are designed to be turned with a standard 1/2" square drive. Tighten the sprinkler into the fitting after applying a PTFE based thread sealant to the sprinkler's threads. Recommended installation torque is 8 to 18 ft-Ibs (11 to 24 N-m) for 1/2" thread sprinklers and 14 to 20 ft-Ibs (19 to 27 N-m) for 3/4" thread sprinklers. Do not exceed the maximum recommended torque. Exceeding the maximum recommended torque may cause leakage or impairment of the sprinkler. Use care when inserting or removing the wrench from the sprinkler to avoid damage to the sprinkler. Install the cover plate by hand by pushing the cover plate into the cup and turning the cover in the clockwise direction until it is tight against the ceiling. Application Model RFC series sprinklers are intended for installation where residential sprinklers are permitted or required by NFPA 13, NFPA 13R, and NFPA 13D. The sprinklers are concealed pendent residential sprinklers. Model RFC 30 and RFC30LL sprinklers are available in ordinary temperature classification for installation where the Maximum Ceiling Temperature does not exceed 100OF (380C). Model RFC43, RFC43LL, RFC49, RFC49LL, RFC58, and RFC76 sprinklers are available in either ordinary or intermediate temperature classification for installation where the Maximum Ceiling Temperature does not exceed 100OF (38°C) or 150OF (660C), respectively. Bulletin 006 September 2020 Page 7 of 8 www.reliablesprinkler.com Model FC Model W3 For use with Model RFC Series sprinklers For use with Model RFC Series sprinklers without wrench -able cap installed with wrench -able cap installed Model W8 High -strength plastic wrench for limited (emergency) use with Model RFC Series sprinklers without wrench -able cap installed. Meets NFPA requirements for sprinkler wrench on premises. Maintenance Model RFC series sprinklers should be inspected and the sprinkler system maintained in accordance with NFPA 25. Do not clean sprinklers with soap and water, ammonia or any other cleaning fluids. Remove dust by gentle vacuuming. Replace any sprinkler cover plate assembly which has been painted (other than factory applied) or damaged in any way. A stock of spare sprinklers should be maintained to allow quick replace- ment of damaged or operated sprinklers. Prior to installation, sprinklers should be maintained in the original cartons and packaging until used to minimize the potential for damage to sprinklers that would cause improper operation or non -oper- ation. Guarantee For the Reliable Automatic Sprinkler Co., Inc. guarantee, terms, and conditions, visit www.reliablesprinkler.com. Listings and Approvals Listed by Underwriters Laboratories, Inc. and UL Certified for Canada to UL1626, Residential Sprinklers for Fire -protection Service (cULus). Certified by Underwriters Laboratories, Inc. and Underwrit- ers Laboratories of Canada for Health Effects to NSF/ANSI Standard 61 Annex G (LL) (RFC30LL, RFC43LL, and RFC49LL only). Australian WaterMark Certified (RFC30LL, RFC43LL, and RFC49LL only). Patents Model RFC30, RFC30LL, RFC43, RFC43LL, RFC49, RFC49LL, RFC58, and RFC76 sprinklers are covered by U.S. Patent No. 9,248,327 and U.S. Patent No. 7,275,603. Model RFC30, RFC30LL, RFC43 and RFC43LL sprinklers are additionally covered by U.S. Patent No. 8,776,903. Ordering Information Specify the following when ordering. Sprinkler • Model (RFC30, RFC30LL, RFC43, RFC43LL, RFC49, RFC49LL, RFC58, RFC76) • Temperature Rating Cover Plate • Model RFC or G5 • Temperature Rating • Finish (See Table H) Sprinkler Wrench • Model FC • Model W3 • Model W8 (Limited use) r. n Bulletin 006 September 2020 Page 8 of 8 www.reliablesprinkler.com Bulletin 135 April 2021 Rel Q Model F1 Res Series Glass Bulb Residential Sprinklers cULus Listed Features • cULus Listed Residential Sprinklers • Available in pendent and horizontal sidewall orientations • Decorative finishes available, including recessed escutcheons and conical concealed cover plates Product Description Model F1 Res Series sprinklers are residential sprinklers with a 3 mm glass bulb operating element. A variety of K-Factors as well as recessed and conical concealed options are available as detailed in this Bulletin. The F1 Res Series sprinklers are specially engineered for fast thermal response to meet the requirements of UL 1626. They are intended for installation in accordance with NFPA 13, 13R, and 13D. Application The Model F1 Res Series sprinklers cULus Listed Residential sprinklers are intended for use in accordance with NFPA 13, NFPA 13R, or NFPA 13D. The Model F1 Res residential sprinklers are cULus Listed for use in residential occupancies and residential portions of any occupancy, where permitted by NFPA 13, NFPA 13R, or NFPA 13D. For NFPA 13R and NFPA 13D applications, the design flow and pressure shall not be less than the minimum flow and pressure specified in the Listed Design Criteria tables in this Bulletin. For NFPA 13 applications, Residential Sprinkler Summary Important Note: Model D wrench and Model GFR2 wrench are no longer compatible with this product. Model W2 (non - recessed) and Model W4 (recessed, concealed) are required. IT. the design density shall be a minimum of 0.1 gpm/sf (4.1 mm/ min), but in no case shall the flow and pressure be less than the minimum flow and pressure specified in the Listed Design Criteria tables in this bulletin. Model F1 Res Series sprinklers are listed for use in wet systems only. Sprinkler Model Sprinkler Identification Number (SIN) Orientation K-Factor gpm/psi112 (Ipm/bar'12) Thread Size NPT or ISO7-1 Installation Options Max. Coverage Area ft x ft (m x m) F1 Res30 R3511 Pendent 3.0(43) 1/2 Pendent or Recessed 16 x16 (4.9 x 4.9) F1 Res49 R3516 Pendent 4.9(71) 1/2 Pendent or Recessed 20 x 20 (6.1 x 6.1) F1 Res58 R3513 Pendent 5.8(84) 1/2 Pendent or Recessed 20 x 20 (6.1 x 6.1) F1 Res76 R7618 Pendent 7.6(109) 3/4 Pendent or Recessed 20 x 20 (6.1 x 6.1) F1 Res30 CCP R3511 Pendent 3.0(43) 1/2 Conical Concealed 14 x 14 (4.3 x 4.3) F1 Res49 CCP R3516 Pendent 4.9(71) 1/2 Conical Concealed 20 x 20 (6.1 x 6.1) F1 Res58 CCP R3513 Pendent 5.8(84) 1/2 Conical Concealed 20 x 20 (6.1 x 6.1) F1 Res76 CCP R7618 Pendent 7.6(109) 3/4 Conical Concealed 20 x 20 (6.1 x 6.1) F1 Res44 HSW R3531 Horizontal Sidewall 4.4(63) 1/2 Recessed 16 x 20 (4.9 x 6.1) F1 Res44 SWC R3531 Horizontal Sidewall 4.4(63) 112 Conical Concealed 16 x 20 (4.9 x 6.1) F1 Res58 HSW R3533 Horizontal Sidewall 5.8(84) 1/2 Recessed 16 x 20 (4.9 x 6.1) F1 Res 58 HSM RA3533 Horizontal Sidewall 5.8(84) 1/2 Recessed 14 x 26 (4.3 x 7.9) Note: Please note SIN difference between F1 Res58 HSW (R3533) and F1 Res58 HSWX (RA3533). www.reliablesprinkler.com Technical Specifications Finishes Style: Pendent and Recessed Pendent (See Table N) Threads: 1/2" NPT or IS07-1R1/2 Sensitivity Nominal K-Factor: 3.0 (43 metric) Fast -response AdlMk Max. Working Pressure: 175 psi (12 bar) Temperature Ratings Material Specifications 155°F (68°C) 175°F (79°C) Thermal Sensor: 3 mm glass bulb Recessed Escutcheons Sprinkler Frame: Brass Alloy F2 Recessed Button: Copper Alloy FV Recessed* Sealing Assembly: Nickel Alloy with PTFE Sprinkler Wrenches `jf y Load Screw: Bronze Alloy Model W2 411P Deflector: Bronze Alloy Model W4 (Recessed) *Note: Model FV escutcheons are not for use in positively pressurized ceiling plenums. Model F1 Res30 Residential Pendent Sprinkler Components and Installation Dimensions Threads Wrench Flat MSYM Sealing Assembly OOSVB 2-1/4" Glass Bulb (57mm) 12 Load Screw Deflector 1-1/4„ (32mm) Components Dimensions Model F1 Res30 Residential Pendent Sprinkler Hydraulic Design Criteria 2-1/4" (57mm) DIA. 1-15/16" (49mm) DIA. I I 2-7/8" (72mm) Face of fitting to finished ceiling 112" (13mm) +/- 1/4" (6mm) 1-3/4" (44mm) +/ 1/4" (6mm) F2 & FV Recessed Escutcheon Installation Minimum Flow and Residual Pressure in Wet Pipe Systems") Maximum Coverage Area (2) ft. x ft.(m x m) Flow gpm (1/min) Pressure psi (bar) Deflector to Ceiling Distance 12 x 12 (3.7 x 3.7) 8 (30) 7.0 (0.48) 1 to 4 inches (25 to 100 mm) 14 x 14 (4.3 x 4.3) 10 (38) 11.0 (0.76) 15 x 15 (4.6 x 4.6) 12 (45) 16.0 (1.1) 16 x 16 (4.9 x 4.9) 13 (49) 18.8 (1.3) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in the table above or (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. Bulletin 135 Reliable Page 2 of 15 April 2021 www.reliablesprinkler.com Technical Specifications Finishes Style: Pendent and Recessed Pendent (See Table N) Threads: 1/2" NPT or ISO7-1 R1/2 Sensitivity Nominal K-Factor: 4.9 (71 metric) Fast -response Max. Working Pressure: 175 psi (12 bar) Temperature Ratings 155°F (68°C) Material Specifications 175°F (79°C) Thermal Sensor: 3 mm glass -bulb Recessed Escutcheons Sprinkler Frame: Brass Alloy F1 Recessed Button: Copper Alloy F2 Recessed Sealing Assembly: Nickel Alloy with PTFE FV Recessed* Load Screw: Bronze Alloy Sprinkler Wrenches �- Deflector: Bronze Alloy Model W2 Model W4 (Recessed) *Note: Model FV escutcheons are not for use in positively pressurized ceiling plenums. Model F1 Res49 Residential Pendent Sprinkler Components and Installation Dimensions 2-1/4" (57mm) 2-1/4" (57mm) DIA. Face of fitting DIA. Face of fitting 1-15/16'. to finished 1-15/16" to finished (49mm) DIA. ceiling (49mm) DIA. ceiling 5/8" (16mm) 1/2" (13mm) +/- 3/8" (9mm) +/- 1/4" (6mm) 03$Vtt 00 2-1/4" (57) 1-3/4" (44mm) +/- 1 1-5/8" (41mm) +/- 1/4" (6mm) 3/8" (9mm) 1-1/4" 1 (32mm) 2-7/8" (72mm) DIA. 2-7/8" (72mm) DIA. Dimensions F1 Recessed Escutcheon Installation F2 & FV Recessed Escutcheon Installation Model F1Res49 Residential Pendent Sprinkler Hydraulic Design Criteria Minimum Flow and Residual Pressure in Wet Pipe Systems(' Maximum Coverage Area (2) ft. x ft. (m x m) Flow gpm (1/min) Pressure psi (bar) Deflector to Ceiling Distance 12 x 12 (3.7 x 3.7) 13 (49) 7.0 (0.48) 1 to 4 inches (25 to 100 mm) 14 x 14 (4.3 x 4.3) 13 (49) 7.0 (0.48) 16 x 16 (4.9 x 4.9) 13 (49) 7.0 (0.48) 18 x 18 (5.5 x 5.5) 17 (64) 12.0 (0.83) 20 x 20 (6.1 x 6.1) 20 (76) 16.7 (1.15) 12 x 12 (3.7 x 3.7) 15 (57) 9.4 (0.65) 4 to 8 inches (100 to 200 mm) 14 x 14 (4.3 x 4.3) 16 (61) 10.7 (0.74) 16 x 16 (4.9 x 4.9) 17 (64) 12.0 (0.83) 18 x 18 (5.5 x 5.5) 19 (72) 15.0 (1.03) 20 x 20 (6.1 x 6.1) 22 (83) 20.2 (1.39) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in the table above or (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. Bulletin 135 Reliable Page 3 of 15 April 2021 www.reliablesprinkler.com Technical Specifications Finishes Style: Pendent and Recessed Pendent (See Table N) Threads: 1/2" NPT or ISO7-1 R1/2 Sensitivity° Nominal K-Factor: 5.8 (84 metric) Fast -response Max. Working Pressure: 175 psi (12 bar) Temperature Ratings Material Specifications 155°F (68°C) 175°F (79°C) Thermal Sensor: 3 mm glass bulb Recessed Escutcheons Sprinkler Frame: Brass Alloy F1 Recessed Button: Copper Alloy F2 Recessed Sealing Assembly: Nickel Alloy with PTFE FV Recessed* c, Load Screw: Bronze Alloy Sprinkler Wrenches '. Deflector: Bronze Alloy Model W2 Model W4 (Recessed) *Note: Model FV escutcheons are not for use in positively pressurized ceiling plenums. Model F1 Res58 Residential Pendent Sprinkler Components and Installation Dimensions 2-1/4" (57mm) 2-1/4" (57mm) DIA. Face of fitting DIA. Face of fitting 1-15/16" to finished 1-15/16" to finished (49mm) DIA. ceiling (49mm) DIA. ceiling 5/8" (16mm) I 1/2" (13mm) +/- 3/8" (9mm) +/- 1/4" (6mm) I Fil OOSVH 00 2-1/4"MOM (57) I 1-3/4" (44mm) 1-5/8" (41mm) +/- 1 3/8" (9mm) /4" (6mm) 1-1/4" I I (32mm) 2-7/8" (72mm) DIA. 2-7/8" (72mm) DIA. Dimensions F1 Recessed Escutcheon Installation F2 & FV Recessed Escutcheon Installation Model F1 Res58 Residential Pendent Sprinkler Hydraulic Design Criteria Minimum Flow and Residual Pressure in Wet Pipe Systems') Maximum Coverage Area (2) ft. x ft. (m x m) Flow gpm (1/min) Pressure psi (bar) Deflector to Ceiling Distance 16 x 16 (4.9 x 4.9) 16 (61) 7.6 (0.52) 1 to 4 inches (25 to 100 mm) 18 x 18 (5.5 x 5.5) 19 (72) 10.8 (0.75) 20 x 20 (6.1 x 6.1) 22 (83) 14.4 (1.0) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in the table above or (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. Bulletin 135 Reliable Page 4 of 15 April 2021 www.reliablesprinkler.com Finishes Technical Specifications (See Table N) Style: Pendent and Recessed Pendent Sensitivity Threads: 3/4" NPT or ISO7-1 R3/4 Fast -response Nominal K-Factor: 7.6 (109 metric) Temperature Ratings Max. Working Pressure: 175 psi (12 bar) 155°F (68°C) 175°F (79°C) Material Specifications Recessed Escutcheons Thermal Sensor: 3 mm glass bulb F1 Recessed PL Sprinkler Frame: Brass Alloy F2 Recessed Button: Copper Alloy FV Recessed' .. Sealing Assembly: Nickel Alloy with PTFE Sprinkler Wrenches Load Screw: Bronze Alloy Model W2 Deflector: Bronze Alloy Model W4 (Recessed) *Note: Model FV escutcheons are not for use in positively pressurized ceiling plenums. Model F1 Res76 Residential Pendent Sprinkler Components and Installation Dimensions 2-1/4" (57mm) 2-1/4" (57mm) DIA. Face of fitting DIA. Face of fitting 1-15/16° to finished 1-15/16'. to finished (49mm) DIA. ceiling (49mm) DIA. ceiling 5/8" (16mm) 1/2" (13mm) +/ 3/8" (9mm) +/- 1/4" (6mm) 03SVH 00 Da (57) I 1-3/4" (44mm) +/- 1-5/8" (41mm) +/- 1/4" (6mm) 3/8" (9mm) 1-5/8" I (44mm) 2-7/8" (72mm) DIA. 2-7/8" (72mm) DIA. Dimensions F1 Recessed Escutcheon Installation F2 & FV Recessed Escutcheon Installation Model F1 Res76 Residential Pendent Sprinkler Hydraulic Design Criteria Minimum Flow and Residual Pressure in Wet Pipe Systems') Maximum Coverage Area (2) Flow Pressure Deflector to ft. x ft. (m x m) gpm (1/min) psi (bar) Ceiling Distance 18 x 18 (5.5 x 5.5) 21 (80) 7.6 (0.52) 1 to 4 inches (25 to 100 mm) 20 x 20 (6.1 x 6.1) 23 (87) 9.2 (0.63) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in the table above or (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. Bulletin 135 Reliable Page 5 of 15 April 2021 www.reliablesprinkler.com Technical Specifications Style: Conical Concealed Pendent and Recessed Pendent Threads: 1/2" NPT or ISO7-1 R1/2 Nominal K-Factor: 3.0 (43 metric) Max. Working Pressure: 175 psi (12 bar) Material Specifications Thermal Sensor: 3 mm glass bulb Sprinkler Frame: Brass Alloy Button: Copper Alloy Sealing Assembly: Nickel Alloy with PTFE Load Screw: Bronze Alloy Deflector: Bronze Alloy Finishes (See Table N) Sensitivity Fast -response Temperature Ratings 155°F (68°C) Recessed Escutcheons/Cover Plates CCP Conical Concealed Plate 135°F (57°C)* FP Recessed* Sprinkler Wrenches Model W4 *Note: Model FP escutcheons and CCP cover plates are not listed for use in positively pressurized ceiling plenums. Model F1 Res30 CCP and FP Recessed Pendent Sprinkler Installation Dimensions 2-5/8" (67mm) 1 1 2-5/8" (67mm) =ace of fitting to finished ceiling -1/4" (32mm) /- 1/4" (6mm) 15/16" (24mm) CCP Recessed Escutcheon Installation FP Recessed Escutcheon Installation Model F1 Res30 CCP Pendent & FP Recessed Pendent Sprinkler Hydraulic Design Criteria ace of fitting to finished ceiling -1/4" (32mm) /- 1/4" (6mm) 1" (25mm) /- 1/4" (6mm) Minimum Flow and Residual Pressure in Wet Pipe Systems') Maximum Coverage Area (2) Flow Pressure Deflector to Ceiling Distance ft. x ft. (m x m) gpm (1/min) psi (bar) 12 x 12 (3.7 x 3.7) 8 (30) 7.0 (0.48) 1/2 to 1 inch (13 to 25 mm) 14 x 14 (4.3 x 4.3) 11 (38) 13.4 (0.92) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in the table above or (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. 3. The sprinkler must be installed into a ceiling with the listed cover plate installed. Bulletin 135 Reliable Page 6 of 15 April 2021 www.reliablesprinkler.com Technical Specifications Style: Conical Concealed Pendent and Recessed Pendent Threads: 112" NPT or ISO7-1 R1/2 Nominal K-Factor: 4.9 (71 metric) Max. Working Pressure: 175 psi (12 bar) Material Specifications Thermal Sensor: 3 mm glass bulb Sprinkler Frame: Brass Alloy Button: Copper Alloy Sealing Assembly: Nickel Alloy with PTFE Load Screw: Bronze Alloy Deflector: Bronze Alloy Finishes (See Table N) Sensitivity Fast -response Temperature Ratings 155°F (68°C) Recessed Escutcheons/Cover Plates CCP Conical Concealed Plate 135°F (57°C)* FP Recessed* Sprinkler Wrenches Model W4 *Note: Model FP escutcheons and CCP cover plates are not for use in positively pressurized ceiling plenums. Model F1 Res49 CCP & FP Recessed Pendent Sprinkler Installation Dimensions 9_F/A" lR7mm\ CCP Recessed Escutcheon Installation 2-5/8" (67mm) DIA. 2-5/16" (59mm)DIA. ace of fitting to finished ceiling I Face of fitting to finished ceiling -1/4" (32mm) ® 1-1/4" (32mm) /- 1/4" (6mm) �� — +/ 1/4" (6mm) 14mm Lv— �1" /4" ( m) (24mm) +/- 1/4" (6mm) 3 3/16" (78mm) DIA. FP Recessed Escutcheon Installation Model F1 Res49 CCP Pendent and FP Recessed Pendent Hydraulic Design Criteria Minimum Flow and Residual Pressure in Wet Pipe Systemsi') Maximum Coverage Area (2) ft. x ft. (m x m) Flow gpm (I/min) Pressure psi (bar) Deflector to Ceiling Distance 14 x 14 (4.3 x 4.3) 13 (49) 7.0 (0.48) 1/2 to 1 inch (13 to 25 mm) 16 x 16 (4.9 x 4.9) 14 (53) 8.2 (0.57) 18 x 18 (5.5 x 5.5) 18 (68) 13.5 (0.93) 20 x 20 (6.1 x 6.1) 20 (76) 16.7 (1.15) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in the table above or (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. 3. The sprinkler must be installed into a ceiling with the listed cover plate installed. Bulletin 135 Reliable Page 7 of 15 April 2021 www.reliablesprinkler.com Technical Specifications Style: Conical Concealed Pendent and Recessed Pendent Threads: 112" NPT or ISO7-1 R1/2 Nominal K-Factor: 5.8 (84 metric) Max. Working Pressure: 175 psi (12 bar) Material Specifications Thermal Sensor: 3 mm glass bulb Sprinkler Frame: Brass Alloy Button: Copper Alloy Sealing Assembly: Nickel Alloy with PTFE Load Screw: Bronze Alloy Deflector: Bronze Alloy Finishes (See Table N) Sensitivity Fast -response Temperature Ratings 155°F (68-C) Recessed Escutcheons/Cover Plates CCP Conical Concealed Plate 135°F (57°C)* FP Recessed* Sprinkler Wrenches Model W4 *Note: Model FP escutcheons and CCP cover plates are not for use in positively pressurized ceiling plenums. Model F1 Res58 CCP and FP Recessed Pendent Sprinkler Installation Dimensions CCP Recessed Escutcheon Installation 2-5/8" (67mm) DIA. 2-5/16" (59mm)DIA. ace of fitting to finished ceiling Face of fitting to finished ceiling 1/4" (32mm) 1-1/4" (32mm) - 1/4" (6mm) v�-rrrn rrrrrrT +/- 1/4" (6mm) 1 1 m) 15/16" +/- 1/4/4"" ((6mm) (24mm) 3-3/16" (78mm) DIA. FP Recessed Escutcheon Installation Model F1 Res58 CCP Pendent & FP Recessed Pendent Hydraulic Design Criteria 111171 101 ra Minimum Flow and Residual Pressure in Wet Pipe Systems') Maximum Coverage Area (2) ft. x ft. (m x m) Flow gpm (1/min) Pressure psi (bar) Deflector to Ceiling Distance 7 16 x 16 (4.9 x 4.9) 16 (61) 7.6 (0.52) 1/2 to 1 inch (13 to 25 mm) 18 x 18 (5.5 x 5.5) 19 (72) 10.8 (0.75) 20 x 20 (6.1 x 6.1) 22 (83) 14.4 (1.0) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in the table above or (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. 3. The sprinkler must be installed into a ceiling with the listed cover plate installed. Bulletin 135 Reliable Page 8 of 15 April 2021 www.reliablesprinkler.com Technical Specifications Style: Conical Concealed Pendent and Recessed Pendent Threads: 3/4" NPT or ISO7-1 R3/4 Nominal K-Factor: 7.6 (109 metric) Max. Working Pressure: 175 psi (12 bar) Material Specifications Thermal Sensor: 3 mm glass bulb Sprinkler Frame: Brass Alloy Button: Copper Alloy Sealing Assembly: Nickel Alloy with PTFE Load Screw: Bronze Alloy Deflector: Bronze Alloy Finishes (See Table N) Sensitivity Fast -response Temperature Ratings 155°F (68°C) Recessed Escutcheons/Cover Plates CCP Conical Concealed Plate 135°F (57°C)* FP Recessed* Sprinkler Wrenches Model W4 *Note: Model FP escutcheons and CCP cover plates are not for use in positively pressurized ceiling plenums. Model F1 Res76 CCP and FP Recessed Pendent Sprinkler Installation Dimensions CCP Recessed Escutcheon Installation .-5/8" (67mm) DIA. 2-5/16" (59mm)DIA. ace of fitting i Face of fitting to finished to finished ceiling ceiling -1/4" (32mm) ®0 1-1/4" (32mm) /- 1/4" (6mm) o T - TT +/- 1/4" (6mm) 15/16" 1" m) (24mm) +/- 1/4/4"" (6mm) 3-3/ 1\8(78mm) DIA. FP Recessed Escutcheon Installation Model F1 Res76 CCP Pendent & FP Recessed Pendent Hydraulic Design Criteria Minimum Flow and Residual Pressure in Wet Pipe Systems0) Maximum Coverage Area (2) Flow Pressure Deflector to Ceiling Distance ft. x ft. (m x m) gpm (1/min) psi (bar) 16 x 16 (4.9 x 4.9) 21 (80) 7.6 (0.52) 1 inch 1/2 (13 to o 25 mm) 18 x 18 (5.5 x 5.5) 22 (83) 8.4 (0.58) 20 x 20 (6.1 x 6.1) 25 (95) 10.8 (0.75) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in the table above or (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. 3. The sprinkler must be installed into a ceiling with the listed cover plate installed. Bulletin 135 Reliable Page 9 of 15 April 2021 www.reliablesprinkler.com Technical Specifications Finishes Style: Sidewall and Recessed Sidewall (See Table N) Threads: 1/2" NPT or ISO7-1 R1/2 Sensitivity Nominal K-Factor: 4.4 (63 metric) Fast -response Max. Working Pressure: 175 psi (12 bar) Temperature Ratings 155°F (68°C) Material Specifications 175°F (79°C) w %` t Thermal Sensor: 3 mm glass bulb Recessed Escutcheons Sprinkler Frame: Brass Alloy F2 Recessed `4 Button: Copper Alloy FV Recessed lR Sealing Assembly: Nickel Alloy with PTFE Sprinkler Wrenches Load Screw: Bronze Alloy Model W2 Deflector: Bronze Alloy Model W4 (Recessed) Model F1Res44 Horizontal Sidewall Sprinkler Installation Dimensions Face of fitting to finished wall 1-5/8" (41 mm) 3/8" (10mm) +/- 1/4" (6mm) +/- 1/4" (6mm) 2-7/16" (62mm) 5/16" (8mm) Dimensions 2-1/4" 1-15/16" (57mm) (49mm) - DIA. DIA. F2 & FV Recessed Escutcheon Installation Model F1 Res44 Horizontal Sidewall Sprinkler Hydraulic Design Criteria Top of Deflector Down from Ceiling to be Either 4" to 6" (100 to 150 mm) or 6" to 12" (150 to 300 mm) Based on Hydraulic Calculations Minimum Flow and Residual Pressure in Wet Pipe Systems(') Maximum Coverage Area (2) ft. x ft. (m x m) Flow gpm (1/min) Pressure psi (bar) Deflector to Ceiling Distance 12 x 12 (3.7 x 3.7) 12 (45) 7.5 (0.52) 4 6 inches (100 to 150 mm) t 14 x 14 (4.3 x 4.3) 14 (53) 10.2 (0.70) 15 x 15 (4.6 x 4.6) 15 (57) 11.6 (0.80) 16 x 16 (4.9 x 4.9) 16 (61) 13.3 (0.92) 16 x 18 (4.9 x 5.5) 18 (68) 16.8 (1.16) 16 x 20 (4.9 x 6.1) 23 (87) 27.4 (1.89) 18 x 18 (5.5 x 5.5) 19 (72) 18.7 (1.29) 12 x 12 (3.7 x 3.7) 14 (53) 10.2 (0.7) 6 to 12 inches (150 to 300 mm) 14 x 14 (4.3 x 4.3) 16(61) 13.2(0.91) 15 x 15 (4.6 x 4.6) 16 (61) 13.2 (0.91) 16 x 16 (4.9 x 4.9) 17 (64) 15.0 (1.03) 16 x 18 (4.9 x 5.5) 20 (76) 20.7 (1.43) 16 x 20 (4.9 x 6.1) 23 (87) 27.4 (1.89) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in the table above or (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. Bulletin 135 Reliable Page 10 of 15 April 2021 www.reliablesprinkler.com Technical Specifications Style: Conical Concealed Sidewall Threads: 1/2" NPT or ISO 7-1 131/2 Nominal K-Factor: 4.4 (63 metric) Max. Working Pressure: 175 psi (12 bar) Material Specifications Thermal Sensor: 3 mm glass -bulb Sprinkler Frame: Brass Alloy Button: Copper Alloy Sealing Assembly: Nickel Alloy with PTFE Load Screw: Bronze Alloy Deflector: Bronze Alloy Finishes (See Table N) Sensitivity Fast -response Temperature Ratings 155°F (68°C) 175°F (79°C) (') Cover Plates SWC Conical Concealed Plate(�) SWC-2 (Slotted) Conical Concealed Platet3i Sprinkler Wrenches Model W4 SWC._ l SWC-2 Note: (t) Not for installation where the maximum ceiling temperature exceeds 100°F due to cover plate temperature rating. (2) 135°F SWC Conical Concealed Plate for 155OF (68°C) sprinklers (3) 135°F SWC-2 (Slotted) Conical Concealed Plate for 1750F (79°C) sprinklers Model F1 Res44 SWC Conical Concealed Horizontal Sidewall Sprinkler and Installation Dimensions 5/16" (8mm) Dimensions 1" (25mm) 1" (25mm) +/-1/4" (6mm) 1/4" (6mm) Face of fitting to finished wall (67mm) (58mm) - - DIA. DIA. 1 5/8" H-(41mm) SWC & SWC-2 Concealed Cover Plate Installation Top of Deflector Down 3 5I from Ceiling to be Either 4" to 6" (100mm to (84mm) 150mm) or 6" to 12" DIA. (150mm to 300mm) Based on Hydraulic Calculations Model F1 Res44 SWC Conical Concealed Horizontal Sidewall Sprinkler Hydraulic Design Criteria Minimum Flow and Residual Pressure in Wet Pipe Systems(') Maximum Coverage Area (2) ft. x ft. (m x m) Ordinary Temperature Rating 155°F (68°C) Intermediate Temperature Rating 175°F (79°C) Deflector to Ceiling Distance Flow gpm (1/min) Pressure psi (bar) Flow gpm (1/min) Pressure psi (bar) 12 x 12 (3.7 x 3.7) 13 (49) 8.7 (0.60) 14 (53) 10.2 (0.7) 14 x 14 (4.3 x 4.3) 14 (53) 10.2 (0.7) 14 (53) 10.2 (0.7) 15 x 15 (4.6 x 4.6) 16 (61) 13.2 (0.91) -- -- 4 to 6 inches 16 x 16 (4.9 x 4.9) 17 (64) 15.0 (1.03) -- _ _ (100 to 150 mm) 16 x 18 (5.5 x 5.5) 19(72) 18.7(1.31) -- -- 16 x 20 (4.9 x 6.1) 23 (87) 27.4 (1.89) - - - - 12 x 12 (3.7 x 3.7) 14 (53) 10.2 (0.7) -- -- 14x14(4.3x4.3) 15(57) 11.7(0.81) -- -- 15 x 15 (4.6 x 4.6) 17 (64) 15.0 (1.03) -- _ _ 6 to 12 inches (150 to 300 mm) 16 x 16 (4.9 x 4.9) 18 (68) 16.8 (1.16) -- -- 16 x 18 (4.9 x 5.5) 20 (76) 20.7 (1.43) - - - - Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in the table above or (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. Bulletin 135 Reliable Page 11 of 15 April 2021 www.reliablesprinkler.com Technical Specifications Finishes Style: Sidewall and Recessed Sidewall (See Table N) Threads: 1/2" NPT or IS07-1R1/2 Sensitivity Nominal K-Factor: 5.8 (84 metric) Fast -response j r" Max. Working Pressure: 175 psi (12 bar) Temperature Ratings 155-F (68-C) �n Material Specifications 175°F (79°C) Thermal Sensor: 3 mm glass bulb Recessed Escutcheons ' Sprinkler Frame: Brass Alloy F2 Recessed Button: Copper Alloy FV Recessed Sealing Assembly: Nickel Alloy with PTFE Sprinkler Wrenches Load Screw: Bronze Alloy Model W2 Deflector: Bronze Alloy Model W4 (Recessed) Model F1Res58 Residential Horizontal Sidewall Sprinkler Installation Dimensions 2-7/16" (62mm) Dimensions Face of fitting to finished wall 3/8" (10mm) +/- 1/4" (6mm) 2-1I/4" 1-15/16" (57mm) DIA. (49mm) DIA. - - 5/16" (8mm) 1-5/8" (41 mm) +/- 1/4" (6mm) Top of Deflector Down from Ceiling to be Either 4" to 6" (100 to 150 mm) or 6" to 12" 71 (150 to 300 mm) Based on Hydraulic Calculations F2 & FV Recessed Escutcheon Installation Model F1 Res58 Horizontal Sidewall Sprinkler Hydraulic Design Criteria Minimum Flow and Residual Pressure in Wet Pipe Systems') Maximum Coverage Area (2) ft. x ft. (m x m) Flow gpm (1/min) Pressure psi (bar) Deflector to Ceiling Distance 12 x 12 (3.7 x 3.7) 16 (61) 7.6 (0.52) 4 to 6 inches (100 to 150 mm) 14 x 14 (4.3 x 4.3) 18 (68) 9.7 (0.66) 15 x 15 (4.6 x 4.6) 19 (72) 10.7 (0.74) 16 x 16 (4.9 x 4.9) 21 (80) 13.2 (0.91) 16 x 18 (5.5 x 5.5) 25 (95) 18.6 (1.28) 16 x 20 (4.9 x 6.1) 29 (110) 25.0 (1.72) 12 x 12 (3.7 x 3.7) 22 (83) 14.4 (1.0) 6 to 12 inches (150 to 300 mm) 14 x 14 (4.3 x 4.3) 22 (83) 14.4 (1.0) 15 x 15 (4.6 x 4.6) 24 (91) 17.1 (1.18) 16 x 16 (4.9 x 4.9) 26 (98) 20.1 (1.39) 16 x 18 (4.9 x 5.5) 31 (117) 28.6 (1.97) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in the table above or (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. 3. Please note SIN difference between F1 Res58 HSW (R3533) and F1 Res58 HSWX (RA3533). Bulletin 135 Reliable Page 12 of 15 April 2021 www.reliablesprinkler.com Finishes Technical Specifications (See Table N) Style: Sidewall and Recessed Sidewall Sensitivity Threads: 1 /2" NPT or ISO7-1 R1 /2 Fast -response Nominal K-Factor: 5.8 (84 metric) Temperature Ratings Max. Working Pressure: 175 psi (12 bar) 155°F (68°C) 175°F (79°C) Material Specifications Recessed Escutcheons Thermal Sensor: 3 mm glass bulb F2 Recessed { Sprinkler Frame: Brass Alloy FV Recessed Button: Copper Alloy Sprinkler Wrenches l Sealing Assembly: Nickel Alloy with PTFE Model W2 Load Screw: Bronze Alloy Model W4 (Recessed) Deflector: Bronze Alloy Model F1 Res58 HSWX Residential Horizontal Sidewall Sprinkler Installation Dimensions 2-7/8" (73mm) 5/16" (8mm) Dimensions Face of fitting to finished wall 3/8" (10mm) +/- 1/4" (6mm) 2-1/4" 1-15/16" (57mm) (49mm) DIA. DIA. 1-7/8" (48mm) +/- 1/4" (6mm) F2 & FV Recessed Escutcheon Installation Model F1 Res58 HSWX Horizontal Sidewall Sprinkler Hydraulic Design Criteria Top of Deflector Down From Ceiling to be Either 4" to 6" (100 to 150 mm) or 6" to 12" (150 to 300 mm) Based on Hydraulic Calculations Minimum Flow and Residual Pressure in Wet Pipe Systems') Maximum Coverage Area(2) ft. x ft. (m x m) Flow gpm (1/min) Pressure psi (bar) Deflector to Ceiling Distance 18 x 20 (5.5 x 6.1) 30 (114) 26.8 (1.85) 4 to 6 inches (100 to 150 mm) 20 x 20 (6.1 x 6.1) 30 (114) 26.8 (1.85) 16 x 22 (4.9 x 6.7) 33 (125) 32.4 (2.23) 16 x 24 (4.9 x 7.3) 38 (144) 42.9 (2.96) 14 x 26 (4.3 x 7.9) 42 (160) 52.4 (3.63) 18 x 20 (5.5 x 6.1) 35 (133) 36.4 (2.51) 6 to 12 inches (150 to 300 mm) 16 x 22 (4.9 x 6.7) 38 (144) 42.9 (2.96) 16 x 24 (4.9 x 7.3) 42 (160) 52.4 (3.61) 14 x 26 (4.3 x 7.9) 46 (174) 62.9 (4.34) Notes: 1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in the table above or (2) the flow required to achieve a minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler. 2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed. 3. Please note SIN difference between F1 Res58 HSW (R3533) and F1 Res58 HSWX (RA3533). Bulletin 135 Reliable Page 13 of 15 April 2021 www.reliablesprinkler.com Finishes Standard Finishes Special Application Finishes Sprinkler<'� F1, F2. FV, FPM, CCP, SWC (Conical) Sprinkler �'� F1, F2. FV, FP(3), CCP, SWC (Conical) Escutcheons Cover Plates �'� Escutcheons Cover Plates 0) Bronze Brass Bright Brass Bright Brass Bright Brass Chrome Plated Chrome Plated Chrome Plated Dull Chrome Dull Chrome Dull Chrome White White White Paint Black Black Black Paint Polyester(') Polyester Polyester(') Polyester Custom Color Custom Color Custom Color Paint Polyester Polyester Electroless Nickel - - PTFE (1) - Notes: (1) Paint or any other coating applied over the factory finish will void all approvals and warranties. (2) cULus Listed Corrosion Resistant. (3) The Model FP escutcheon assembly consists of an unfinished galvanized cup with a finished escutcheon ring. Installation Models F1 Res sprinklers are to be installed as shown in this bulletin. Model F1, F2, FV, and FP recessed escutcheons are the only recessed escutcheons to be used with Model F1 Res sprinklers. Not all F1 Res sprinklers may be used with all recessed escutcheons offered. Confirm listing of escutcheon type for use with individual sprinklers. Use of any other recessed escutcheon will void all approvals and warranties. For installing Model F1 Res sprinklers, use only the Model W2 sprinkler Wrench; for installing Models F1 Res Recessed Pendent, Sidewall, Conical Concealed Pendent (CCP), and Sidewall Concealed (SWC and SWC-2) sprinklers use only the Model W4 sprinkler wrench. Use of wrenches other than those specified may damage these sprinklers. Installation of F1 Res sprinklers in a wall or ceiling will require a hole diameter of 2-1/4" (57 mm) for F1 or F2 recessed escutcheons; or 2-5/8" (67 mm) for FP recessed escutcheons, CCP, SWC, and SWC-2 cover plates. Install F1 Res HSW sprinklers with a ceiling to deflector distance that complies with the hydraulic design criteria tables in this bulletin. The flow arrow on deflector must point away from near wall and "Top" marking must face the ceiling. A 'leak tight" sprinkler joint can be obtained with the following torque: • 1/2" NPT and IS07-1R1/2: 8-18 ft-Ibs (11 —24 N-m) • 3/4" NPT and ISO7-1 R3/4: 14-20 ft-Ibs (19 — 27 N-m) Do not tighten sprinklers over maximum recommended torque. This may cause leakage or impairment of the sprinklers. Do not install any glass bulb sprinklers where the bulb is cracked or there is a loss of liquid from the bulb. Glass bulb sprinklers have orange bulb protectors to minimize bulb damage during shipping, handling and installation. Remove this protection at the time the sprinkler system is placed in service. Removal of the protectors before this time may leave the bulb vulnerable to damage. RASCO wrenches are designed to install sprinklers when protectors are in place. Remove protectors by undoing the clasp by hand. Do not use tools to remove the protectors. =UUM19P Model W2 Model W4 Wrench Installation Example Model W4 The Model W4 wrench includes two sets of jaws. One set of jaws is equivalent to a Model GFR2 wrench and the other set of jaws is equivalent to a Model W 1 wrench. Use the smallest of the two sets of jaws that will fit on the sprinkler's wrench flats. The Model W4 wrench is used in conjunction with the installer's nominal 1/2" square drive ratchet and nominal 5" (125mm) long extension (not provided) as shown in Figure 13. Bulletin 135 April 2021 Page 14 of 15 www.reliablesprinkler.com Maintenance Reliable Model F1 Res Sprinklers should be inspected and the sprinkler system maintained in accordance with NFPA 25, 13, 13D, and 13R, as well as the requirements of any Authorities Having Jurisdiction. Prior to installation, sprinklers should remain in the original cartons and packaging until used. This will minimize the potential for damage to sprinklers that could cause improper operation or non -operation. Do not clean sprinklers with soap and water, ammonia liquid or any other cleaning fluids. Remove dust by gentle vacuuming without touching the sprinkler. Replace any sprinkler which has been painted (other than factory applied). Properly installed CCP, SWC, and SWC-2 cover plates will have an air gap that is required for proper operation, do not seal the gap or paint the cover plates. Replace any sprinkler which has been damaged, where cracks are observed in the glass bulb, or when liquid has been lost from the glass bulb. A stock of spare sprinklers should be maintained to allow quick replacement of damaged or operated sprinklers. Failure to properly maintain sprinklers may result in inadvertent operation or non -operation during a fire event. Listings & Approvals Listed by Underwriters Laboratories Inc. and UL Certified for Canada (cULus) Guarantee For Reliable Automatic Sprinkler Company guarantee, terms, and conditions, visit www.reliablesprinkler.com. Patents For patents applicable to products contained in this technical bulletin, please visit www.r-s.co Ordering Information Specify the following when ordering: Sprinkler • Model (See Table A) • Temperature Rating • Threads (NPT or IS07-1) • Finish (See Table N) Escutcheon or Cover Plate • Model • Finish (See Table N) Sprinkler Wrench • Model W2 (Pendent and HSW) • W4 (Recessed and Concealed) Note: Please note SIN difference between F1 Res58 HSW (R3533) and F1 Res58 HSWX (RA3533). LO M N O O O 0) O O Z d Bulletin 135 Reliable Page 15 of 15 April 2021 www.reliablesprinkler.com CAL FIRE - RIVERSIDE UNIT RIVERSIDE COUNTY FIRE DEPARTMENT OFFICE OF THE FIRE MARSHAL — LA QUINTA CALIFORNIA 78495 Calle Tampico, La Quinta, CA 92253 • Phone (760) 777-7074 • www.rvcfire.org September 27, 2021 Symons Fire Protection INC 9475 Chesapeake Drive San Diego, CA 92123 Re: Residential Fire Sprinkler Plan Review — ANDALUSIA FCMP2021-0025 / MASTER PLAN 401 The sprinkler plans you submitted for the above referenced project have been reviewed by Riverside County Fire Department - Office of the Fire Marshal personnel and are approved with the following conditions. Contractor shall separately apply and pay fees for the various Production Home lots associated with this project as each will be handled under separate permit. Permanently marked identification signs shall be attached to all control valves. The following inspections/tests are required to be witnessed by Office of the Fire Marshal Staff: (a) Overhead Rough and Hydro static test: All piping shall be visible and pumped at normal operating pressure. *No jacketed electrical and data wiring shall be in contact with, nor have the potential to contact CPVC piping once insulation is installed. (b) Final inspection The Fire Department approved plans and conditions letter must be at the job site. Applicant/installer shall be responsible to contact the Fire Department to schedule inspections. Requests for inspections are to be made at least 48 hours in advance and may be arranged by calling (760)777-7131. All questions regarding the meaning of these conditions should be referred to the Office of the Fire Marshal staff at (760)777-7074. Kohl Hetrick - Fire Safety Specialist