Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
BCOM2023-0019
DESIGN & DEVELOPMENT DEPARTMENT 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 Permit Type: Permit Number: Property Address APN: Legal Description Property Zoning: Valuation: Building Commercial BCOM2023-0019 BUILDING PERMIT eca Qa�&a CALIFORNIA 49499 EISENHOWER DR (TENNIS CLUB) 658160061 $150,000.00 Owner: Applicant: Contractor: PHONE (760) 777-7125 WWW.LAQUINTACA.GOV APPLIED DATE: 05/11/2023 ISSUED DATE: 08/09/2023 HP LQ INVESTMENT LP 150 RADNOR CHESTER RD STE A-270, RADNOR, PA 19087 Kevin Bowsher 2630 Sepulveda Blvd., Torrance, CA 90505 CROSSFIRE CORP / 1080944 78550 AVENUE 41, BERMUDA DUNES, CA 92203 PRIOR TO THE ISSUANCE OF THIS PERMIT FOR CONSTRUCTION, ALTERATION, IMPROVEMENT, DEMOLITION, OR REPAIR THE OWNER, APPLICANT AND/OR CONTRACTOR UNDER PENALTY OF PERJURY HAVE AFFIRMED WHEN APPLICABLE, THROUGH THE SUBMITTAL OF FORMS OR BY OTHER ELECTRONIC MEANS, THE FOLLOWING: LICENSED CONTRACTOR OR OWNER -BUILDER DECLARATION (1 or 2) 1) They are licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, and the referenced License is in full force and effect, or; 2) That they are exempt from the Contractors' State License Law for the reason(s) indicated by either (2)(a) and/or (2)(b), or (2)(c) where he or she is exempt from licensure by a valid exemption. [Section 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractors' State License Law (Chapter (commencing with Section 7000) of Division 3 of the Business and Professions Code] Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).) a) As owner of the property, or my employees with wages as their sole compensation, will do all of or portions of the work, and the structure is not intended or offered for sale (Section 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who, through employees' or personal effort, builds or improves the property, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the Owner -Builder will have the burden of proving that it was not built or improved for the purpose of sale.). b) As owner of the property, will be exclusively contracting with licensed c) Are exempt from licensure under the Contractors' State License Law. As an Owner -Builder, they acknowledge that, except for their personal residence in which they must have resided in for at least one year prior to completion of the improvements covered by this permit, they cannot legally sell a structure built as an owner -builder if it has not been constructed in its entirety by licensed contractors. It is understood that a copy of the applicable law, Section 7044 of the Business and Professions Code, is available upon request when this application was submitted at the following Web site: http://www.leginfo.ca.gov/calaw.html. DECLARATION REGARDING CONSTRUCTION LENDING AGENCY (If applicable) A construction lender will be used for completion of the improvements covered by this permit and the name and information of which is on file for public inspection during the regular business hours of the public entity. Failure of the applicant to indicate the construction lender on the application does not relieve that person of the requirement to give the WORKERS' COMPENSATION DECLARATION (1, 2 or 3) WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000), IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. 1) Has and will maintain a certificate of consent to self -insure for workers' compensation, issued by the Director of Industrial Relations as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 2) Has and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 3) Certifies that, in the performance of the work for which this permit is issued, shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if should become subject to the workers' compensation provisions of Section 3700 of the Labor Code, shall forthwith comply with those provisions. NOTICE TO APPLICANT (1, 2 and 3) 1) Each person upon whose behalf this application was made, each person at whose request and for whose benefit work is being performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and employees for any act or omission related to the work being performed under or following issuance of this permit. 2) Any permit issued as a result of this application becomes null and void if work is not commenced within 360 days from date of issuance of such permit, or if cessation of work for 180 days will subject permit to cancellation. On or after January 1, 2019, every permit issued shall become invalid unless the work on the site authorized by such permit is commenced within 12 months after its issuance, or if the work authorized on the site by such permit is suspended or abandoned for a period of 12 months after the time the work is commenced. 3) Certified that they read the application and state that the information provided is correct. Agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above -mentioned property for inspection purposes. IMPORTANT: An Application for Permit was made to the Building Official, subject to the conditions and restrictions set forth at the time of application, which is now hereby an Issued Permit. If any part of the information being supplied on this permit is inaccurate or untrue, please contact the City of La Quinta at (760) 777-7125 immediately for correction. Printed: 3/5/25 5:17 pm Page 1 of 6 BUILDING PERMIT Permit Type: Building Commercial Permit Number: BCOM2023-0019 Property Address: 49499 EISENHOWER DR (TENNIS CLUB) construction lender preliminary notice from that duty. Printed: 3/5/25 5:17 pm Page 2 of 6 BUILDING PERMIT Permit Type: Building Commercial Permit Number: BCOM2023-0019 Property Address: 49499 EISENHOWER DR (TENNIS CLUB) LQ RESORT / FITNESS RESTROOMS & LOCKER ROOMS RENOVATION *** 1,522SF RENOVATION OF MEN'S AND WOMAN'S LOCKEF ROOMS AND RESTROOMS AT EXISTING FITNESS CENTER. [VA/R-1/NON-SPRINKLERED]. EXISTING PATH OF TRAVEL COMPLIANT F ARCHITECT. VERIFY IN FIELD. 2022 CALIFORNIA BUILDING CODES. nnntructien Dpta Commercial Work Type Remodel Gross Square Footage 1522 Conditioned Square 0 Footage Code Edition 2022 Remodel Area Square 1522 New Electrical Square 1630 Footage Footage Number of Ventilation 8 Miscellaneous 1 Number of Plumbing 20 Fan(s) Mechanical Fixtures/Traps Transportation Uniform No City Development No Art in Public Places No Mitigation Fee Impact Fee Applicable Fund Exempt Applicable Type Group Sq Ft Value Printed: 3/5/25 5:17 pm Page 3 of 6 BUILDING PERMIT Permit Type: Building Commercial Permit Number: BCOM2023-0019 Property Address: 49499 EISENHOWER DR (TENNIS CLUB) Invoice No. Fee Fee Amount Amount Paid INV-00000138 Re -Inspection Fee $87.53 $87.53 Total for Invoice lNV-00000138 w .. 3 $87.53 INV-00000140 Credit Card Convenience Fee $2.19 $2.19 Total for Invoice lNV-00000140 $2.19 $2.19 INV-00001492 Re -Inspection Fee $87.53 $87.53 Total for Invoice lNV-00001492 $87.53 $87.53 PERMIT-BCOM2023-00' VENT FAN PC $46.72 $46.72 9 HOURLY CHARGE - INTERWEST STRUCTURAL PLAN REVIEW $62.50 $62.50 WATER HEATER CHANGEOUT $14.59 $14.59 TECHNOLOGY ENHANCEMENT FEE $8.00 $8.00 FIXTURE/TRAP $291.80 $291.80 FIRE STAFF - PER HOUR $87.50 $87.50 ALTERATIONS/ADDITIONS - NON-RESIDENTIAL $161.00 $161.00 REMODEL, EA ADDITIONAL 500SF $78.78 $78.78 SOLAR THERMAL $29.18 $29.18 REMODEL, EA ADDITIONAL 500SF PC $63.03 $63.03 FIXTURE/TRAP PC $291.80 $291.80 SEWER CONNECTION/SEPTIC ABANDON $29.18 $29.18 SMI - COMMERCIAL $42.00 $42.00 NON-RESIDENTIAL, FIRST 2,000SF $131.30 $131.30 VENT FAN $116.72 $116.72 OTHER MECHANICAL EQUIPMENT $43.77 $43.77 WATER HEATER CHANGEOUT PC $8.75 $8.75 SOLAR THERMAL PC $29.18 $29.18 REMODEL, FIRST 100SF PC $162.81 $162.81 REMODEL, FIRST 100SF $59.52 $59.52 NON-RESIDENTIAL, FIRST 2,000SF PC $101.54 $101.54 OTHER MECHANICAL EQUIPMENT PC $43.77 $43.77 RECORDS MANAGEMENT FEE - MAJOR $22.00 $22.00 SEWER CONNECTION/SEPTIC ABANDON PC $20.42 $20.42 BSAS SB1473 FEE $6.00 $6.00 Total for Invoice PERMIT-BCOM2023-0019 $1,951.86 $1,951.86 Grand Total for Permit $2,129.11 $2,129.11 Workflow Step / Action Name Action Type Start Date End Date Inspections - Do Not Pour Concrete Until Approved v.1 ---------------------------------------------------------------------------------------------------------------------------------------- 08/23/2023 16:20 Footing v. Inspection ---------------------------------------------------------------------------------------------------------------------------------------- Setbacks v.1 Inspection ---------------------------------------------------------------------------------------------------------------------------------------- Slab v.1 Inspection 08/30/2023 6:40 08/30/2023 17:05 ---------------------------------------------------------------------------------------------------------------------------------------- Underground Plumbing v.1 Inspection 08/23/2023 16:20 08/24/2023 10:18 ---------------------------------------------------------------------------------------------------------------------------------------- Underground Plumbing v.2 Inspection 08/24/2023 17:19 08/25/2023 14:39 ---------------------------------------------------------------------------------------------------------------------------------------- Underground Plumbing v.3 Inspection 08/28/2023 8:20 08/28/2023 14:55 ---------------------------------------------------------------------------------------------------------------------------------------- Water Line v.'i Inspection Inspections - Cover No Work Until Approved v.1 10/09/2023 16:21 Printed: 3/5/25 5:17 pm Page 4 of 6 BUILDING PERMIT Permit Type: Building Commercial Permit Number: BCOM2023-0019 Property Address: 49499 EISENHOWER DR (TENNIS CLUB) Roof Nail v.1 Inspection ---------------------------------------------------------------------------------------------------------------------------------------- Okay to Wrap v.1 Inspection ---------------------------------------------------------------------------------------------------------------------------------------- Rough Fire Clearance v.1 Generic Action 01/02/2024 9:38 ---------------------------------------------------------------------------------------------------------------------------------------- Framing v.1 Inspection 10/09/2023 16:21 10/10/2023 15:36 ---------------------------------------------------------------------------------------------------------------------------------------- Framing v.2 Inspection 10/11/2023 8:13 10/11/2023 16:06 ---------------------------------------------------------------------------------------------------------------------------------------- Framing v.3 Inspection 10/12/2023 16:31 10/13/2023 10:49 ---------------------------------------------------------------------------------------------------------------------------------------- Rough Electrical v.1 Inspection 10/09/2023 16:21 10/10/2023 15:28 ---------------------------------------------------------------------------------------------------------------------------------------- Rough Electrical v.2 Inspection 10/11/2023 8:13 10/11/2023 16:06 ---------------------------------------------------------------------------------------------------------------------------------------- Rough Electrical v.3 Inspection 10/12/2023 16:34 10/13/2023 10:50 ---------------------------------------------------------------------------------------------------------------------------------------- Rough Mechanical v.1 Inspection 10/09/2023 16:21 10/10/2023 15:28 ---------------------------------------------------------------------------------------------------------------------------------------- Rough Mechanical v.2 Inspection 10/11/2023 8:13 10/11/2023 16:07 ---------------------------------------------------------------------------------------------------------------------------------------- Rough Mechanical v.3 Inspection 10/12/2023 16:35 10/13/2023 10:51 ---------------------------------------------------------------------------------------------------------------------------------------- Rough Plumbing v.1 Inspection 10/09/2023 16:21 10/10/2023 15:28 ---------------------------------------------------------------------------------------------------------------------------------------- Rough Plumbing v.2 Inspection 10/11/2023 8:13 10/11/2023 16:07 ---------------------------------------------------------------------------------------------------------------------------------------- Rough Plumbing v.3 Inspection 10/12/2023 16:35 10/13/2023 10:51 ---------------------------------------------------------------------------------------------------------------------------------------- Shower Pan v.1 Inspection ---------------------------------------------------------------------------------------------------------------------------------------- Insulation v.1 Inspection ------------------------------------------ Drywall Nail v.1 Inspection 10/18/2023 7:35 10/18/2023 15:03 -------------------------- T-Bar/Overhead v.1 Inspection .....---------- -- -- -- -- -- -- -- --............................................................................................................ Exterior Lath v.1 Inspection -------------------------- Gas Test v.1 ............................................ Inspection -------------------------------------------- Sewer Connection v.1 Inspection Inspections - Final v.1 11/27/2023 16:30 01/10/2024 10:27 ---------------------------------------------------------------------------------------------------------------------------------------- Fina 're v.1 Inspection 01/02/2024 9:39 ---------------------------------------------------------------------------------------------------------------------------------------- Final Building v.1 Inspection 11/27/2023 16:30 11/29/2023 16:42 ---------------------------------------------------------------------------------------------------------------------------------------- Final Building v.2 Inspection 12/07/2023 17:14 12/08/2023 11:10 ---------------------------------------------------------------------------------------------------------------------------------------- Final Building v.3 Inspection 01/10/2024 10:26 01/10/2024 10:27 Certificate of Occupancy v.1 Issue Certifica` Create Report Construction or work for which a permit is required shall be subject to inspection by the building official and such construction or work shall remain visible and able to be accessed for inspection purposes until approved. Approval as a result of an inspection shall not be construed to be an approval of a violation of the provisions of the applicable code and other ordinances of the jurisdiction. Inspections presuming to give authority to violate or cancel the provisions of the applicable code and other ordinances of the jurisdiction shall not be valid. It shall be the duty of the owner or the owner's authorized agent to cause the work to remain visible and able to be accessed for inspection purposes. Neither the building official nor the jurisdiction shall be liable for expense entailed in the removal or replacement of any material required to allow inspection. It shall be the duty of the holder of the building permit or their duly authorized agent to notify the building official when work is ready for inspection. It shall be the duty of the permit holder to provide access to and means for inspections of such work that are required by this code. Printed: 3/5/25 5:17 pm Page 5 of 6 BUILDING PERMIT Permit Type: Building Commercial Permit Number: BCOM2023-0019 Property Address: 49499 EISENHOWER DR (TENNIS CLUB) A building or structure shall not be used or occupied in whole or in part, and a change of occupancy of a building or structure or portion thereof shall not be made, until the building official has issued a certificate of occupancy therefor as provided herein. Issuance of a certificate of occupancy shall not be construed as an approval of a violation of the provisions of the applicable code and other ordinances of the jurisdiction. Certificates presuming to give authority to violate or cancel the provisions of this code or other ordinances of the iurisdiction shall not be valid. A person shall not make connections from a utility, a source of energy, fuel, or power, or a water system or sewer system to any building or system that is regulated by the applicable code and other ordinances of the jurisdiction for which a permit is required, until approved by the buildina official. Printed: 3/5/25 5:17 pm Page 6 of 6 BCOM2023-0019 CITY OF LA QUINTA BUILDING DIV nl REVIEWED FOR CODE COMPLIANCE BY:Deisy Mendez DATE: OS103/2023 eca Quif&(v GIA1 „Ir;u0F.1FRI' - DESIGN & DEVELOPMENT DEPARTMENT 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 (760) 777-7125 PATH OF TRAVEL UPGRADE DETERMINATION DATE: 08/02/2023 ADDRESS: 49-499 Eisenhower Dr. STATUS: FIRST REVIEW DESCRIPTION: Fitness Locker/Restroom Renovation PLAN CHECKED BY: TELEPHONE NUMBER: APPLICANT: Kevin Bowsher PLAN CHECK #: BCOM2023-0019 In accordance with the 2022 California Building Code (CBC) Section 11 B-202.4, exception 8, the cost of compliance with Section 11 B-202.4 is allowed to be limited to 20% of the adjusted construction cost of the alterations, structural repairs or additions when the adjusted construction cost does not exceed the current valuation threshold. (A) Construction cost for proposed project (not including costs of improvements to the path of travel to the area of alteration): $ 150,000 (B) Cost of alterations to areas on this path of travel undertaken during the preceding three-year period which did not provide an accessible path of travel to the area of alteration (as applicable): $ 0 (C) Adjusted construction cost (C) = (A) + (B) $ 150,000 PATH OF • •COSTS: Elements serving the area of alteration Is element in If not, will element be Proposed cost of based on priority compliance with upgraded to current compliance with current Chapter 11 B? Chapter 11 B? current Chapter 11 B (Y/N) (Y/N) 1. An accessible entrance $ Y 0 2. An accessible route (interior and exterior) to $ the altered area Y 0 3. At least one accessible restroom for each $ gender or a single accessible unisex, single Y 0 user or family restroom. 4. Accessible public telephones $ N/A 0 5. Accessible drinking fountains $ Y 0 6. When possible, additional accessible elements such as: a. Parking Y $ 0 b. Storage c. Signs d. Alarms e. Other Total cost of providing compliant path of $ 0 (D) travel elements: • OF OF OF •NS I RUC I ION COST: Compliance of path of travel upgrades as % of adjusted construction cost: 0 % (E) (E)% =(D)/(C) Note: This may not be less than 20% LINE S I n=LUTRON® JA8 LED wpRARTGMA 2 CAS: MBI nert�Y Round Regressed for Wet Locations, 700-1600 Lumens, 7-21 Watts Recessed Downlighting LDC La Quinta F R 1 Proj.# 523.01.02 Issue Date: 03-27-23 The SIGMA 2 series boasts a sleek modern look with a broad offering of shapes, including pinspots, slots, and slopes. In addition, choose between multiples, regressed optics and tailed beam angles to match the intended look and feel of your architectural space. Add a hex cell louver, a softening, or a linear spread lens to further customize your fixture to further meet desired optical performance. Technical Mounting: Remodel $„ 203mm 4" 102mm I Hole (ut Size Al,(75mm) * Required for Non -IC models only. Thermal Protector" EUU \ 61 1mm m 11" 61,11d 13e" D9mm 157mm 35mm Ordering Guide Example: S204WS-A30MC-T1-RM1 Trim Trimless Option Source Lumens Color Temp. Color Per Head S204 4 4-4 4 B : Black S : No adapter A: 700 (IC Rated)7 27 : 2700 K W : White B : 700 (IC Box)7 30 : 3000 K C : 1100 (IC Rated) 35: 3500 K QUICKSHIP D : 1100 (IC Boxy 40: 4000 K '® E: 1600 (Non -IC) 50: 5000 K Highlighted ox option denotes QuickShip. FIXTURE SPECIFICATIONS Aperture 23/4" 70mm Application Recessed Approved Location Wet Certification cETLus CRI 90 Dimming Yes Hole Cut Size 215/,6' 75mm Max. Ceiling Thickness 3/d' 19mm Power Factor >0.9 Power Supply Type Constant Current Lumen Maintenance 70% @ 50,000 Hrs THD <20% Title 24 Yes TM40 Annex E P2 / V- / F3 Delivered Lumens Per Head Option Lumens/ Watt Driver Wattage 682 A,B 92 7 968 C,D 85 11 1451 E F 66 22 Beam Lens Options Driver Options Voltage Mounting Shipping Angle 44- 4-44 S: Spot C: Clear protective T: TRIAC, ELV, 120V Input' 1�5 RM : Remodels 1 :Ship Complete M : Medium lens - - 1 : 120V NC: New Construction 2: Ship Rough -in First W : Witle 277V Input 2: 277V AH : ArClutectural B : Rated -40°C, 0-10V, 3: 347V C-Channel Brackets 120-277 & 347V Input' 4: 208V NP: New Construction, D : DALI, Rated -40'C, 5: 240V Chicago Plenum' 120-277V & 347V Input2 M : DMX, 120-277V InpUtl,4 E: Emergency Backup, 0-10V, 120-277V Input2 4 L : Lutron Ecosystem, 120- 277V Input4 Q: Casambi Enabled Driver, 120-277V InpUtl,4 Example items for "Ship Rough -in First": First: S204WS-C30MC-T1-NC2 Second: S204WS-C30MC2 Notes: 1 Delivered lumens provided are based on Available with Source Lumens Per Head 3000 K with wide reflector. option; A, B, C, D or F only. 2 Above ceiling access or remote mount 6 Not available with IC Box (option B, D or F). required. 7 Only available with Driver Options "T" or "C". 3 Only available in 120V (Voltage option 1). 6 Only available with IC Box (option B, D or F). 4 Not available in 347V. QuickShip option is available on orders of Liteline Corporation Telephone Fax Copyright © 2023 416.996.1856 905.709.5255 All rights reserved. 1.866.730.7704 1.888.738.9736 100 pieces or less. QuickShip lead time may vary for orders greater than 100 pieces. No additional shipment rates apply. Subject to availability. For additional options please consult your A -Line representative. All trademarks are the property of their respective owners. Due to our continued efforts to improve our products, product specifications are subject to change without notice. LITELINE.COM REV 1.5.23 Features Beam Angle Multi -faceted reflector available for fixed CCT models in spot (15o), medium (40o) or wide (50°) beam angles. LED Characteristics Available with high powered BRIDGELLIX® LED chip that maintains high lumens per watt with a typical 90 CRI. LED Optics Integrated clear protective lens. Dimming Multiple dimming options are available. 100-10% dimming with TRIAC/ELV, 100-1% dimming with 0-10V, and dim to off with compatible devices. Compatible with OnCloud dimmer. See LED Driver Options for details. Consult factory for compatible dimmers. Thermal Performance Extruded aluminum heat sink ensures optimal heat dissipation and LED life. LED Driver Options LED Driver The LED driver is remote mounted to allow for a lower operating temperature of the LED, longer life, and serviceable separate from the fixture. Includes an 18" (457mm) plenum rated FT6 wire with DC 2.1 connector from the driver to fixture. Inrush current for all drivers is compliant with NEMA 410. See LED Driver Options for more specific details. System Protection Integral thermal protection provided on Non -IC models to indicate improper installations. Mounted to the junction box and will disconnect if insulation is detected. Insulation must maintain 3" (76mm) clearance from top or sides. IC Box and New Construction Chicago Plenum Single wall aluminum housing allows fixture to be installed in insulated ceiling applications. The housing is equipped with rigid hanger bars for easy installation without warping or moving. With Mounting option "NIP" the fixture is built in accordance with City of Chicago Environmental Air (CCEA). Hanger Bars - New Construction and IC Box Rigid hanger bars extend up to 25" (635mm). Score lines on the hanger bars allow for tool -less shortening down to 12" (305mm). Built-in line-up foot allows for accurate housing height during installation. Integrated T-bar clips easily snap onto T-bars. Hanger Bars - Architectural C-Channel Architectural frame bracket accepts C-channel and EMT conduit. Vertically adjustable. Shipping Fixtures can be shipped complete or with rough -in components first, and the remainder once requested. Environment Suitable for use in wet locations. Warranty 5-Year warranty. (T) TRIAC : Dimming for 120V only, 100-10% dimming. (C) TRIAC/ELV/0-10V: TRIAC/ELV dimming for 120V only, 100-10% dimming. 1% Dimming over 0-10V is optional, but required for 277V & 347V dimming. (B) Rated -40 : Low temperature driver operation. Dimming to 1 % over 0-10V. (D) DALI : DALI soft dimming to 1%. Dim -to -off with standby power <0.3W. Rated to -40. (M) DMX : DMX/RDM soft dimming to 0.1%. Dim -to -off with standby power <0.3W. (E) Emergency Backup : Integrated emergency battery with switchable output of 5W for 180 minutes, or 10W for 90 minutes of operation during an outage. (L) : Lutron EcoSystem : Suitable for integration into a planned or existing EcoSystem® lighting control solution. Dimming down to 1 % with compatible controls. (0) Casambi Enabled : Casambi wireless module included. Wireless dimming to 1% provided over 0-10V signal from module. Accessories QuickShip Made -To -Order Made -To -Order products ship within seven business days of an order being released. ONLINE PRODUCT DETAILS AND DOCUMENTATION ®P-3010 ALB-27 Q LC-CRTL-DIM-1 75mm round pre -mounting plate for 27" Linear hanger bar, 2-pack. 'I I 1 Smart Wi-Fi dimmer, 150W, 120V. Sigma 2 fixtures. �J ` Compatible with TRIAC Driver. Technical Drawings Mounting: New Construction l I o O 61/2" e M 165mm Mounting: Architectural max. 9.9 �_u Mounting: IC Box / New Construction Chicago Plenum F 71Y16' 196mm o, o CD 0 289mm (d o LDC La Quinta F R 1 Proj.# 523.01.02 Issue Date: 03-27-23 Luminaire Budgetary Diagram Mounting Height vs. Fixture Spacing Sample reference with 90 CRI at 3000 K CCT nn1+ 20ft 18ft 16ft L 14ft .c 12ft 10ft 8ft 6ft Oft Spot CCT Correction Fact4s : I Baseline lumens- 3004 K 16001m 17.7FC 1831x MultipLK3OMKlumea�laluesby- 11001m 15.3FC 1571x 0.95 for 2700 K 7001m 13.3FC 1371x 1.10for 3500K 1.15 for 4000 K 16001m 19.6FC 11031x L20 for 5000 K -11001m 16.6FC 1711x - - - - 7001m 14.2FC 1451x 16001m 112.3FC 1 1321x 11001m 18.4FC 1901x - r 7001m 15.4FC 1581x 16001m 116.3FC 11751x 11001m 111.2FC 11211x - _ _ 7001m 17.1FC 1761x I I 16001m 1 22.7FC 12441x 11001m I115.6FC 11681x 7001m 19.9FC 1 1071x 16001m 133.91`13 13651x - - - - 11001m 123.3FC 12511x 7001m 114.8FC 1 1591x LDC La Quinta F R 1 Proj.# 523.01.02 Issue Date: 03-27-23 / Medium I - - - - I I I Wide I I I I 2ft 4ft 6ft 8ft 1Oft Beam 50% CD Diameter / Fixture Spacing To use Lifeline's Budgetary Diagram: 1. Determine mounting height above work surface for application on Y axis. 2. Determine appropriate spacing by comparing beam cone size on X axis. 3. Select appropriate beam angle and lumen package from slope line at intersection point. Photometry Note : All photometric data is based on 3000 K CCT, wide beam spread, white trim and clear protective lens CCT Correction Factors: Baseline lumens = 3000 K Multiply 3000 K lumen values by: 0,95 for 2700 K 1.10 for 3500 K 1.15for 4000 K 1.20 for 5000 K S204Wx-A30WC-xx-xxx : SIGMA 2, 7W, wide beam spread, clear protective lens 12ft I Zone Lumens % Luminaire o° 0-30 552 80.94% p 0-40 611 89.59% 1 0-60 643 94.28% 60-90 18.6 2.73% D Lux FC L W 70-100 11.5 1.69% 4' 573 53 4' 4' 90-120 9.43 1.38% 8' 143 13 8' 8' 0-90 661 96.92% 12' 64 6 11.9' 11.9' 90-180 20.7 3.04% 16' 36 3 15.9' 15.9' 0-180 682 100% 20' 23 2 19.9' 19.9' S204Wx-C30WC-xx-xxx : SIGMA 2, 11 W,. wide beam spread, clear protective lens Zone Lumens % Luminaire o° 0-30 794 82.02% p 0-40 879 90.81% 1 0-60 924 95.45% 60-90 22.8 2.36% D Lux FC L W 70-100 12.4 1.28% 4' 826 77 4' 4' 90-120 9.79 1.019/0 8' 206 19 8' 8' 0-90 946 97.73% 12' 92 9 11.9' 11.9' 90-180 22.1 2.28% 16' 52 5 15.9' 15.9' 0-180 968 100% 20' 33 3 19.9' 19.9' S204Wx-E30WC-xx-xxx : SIGMA 2, 22W, wide beam spread, clear protective lens 1 i D Lux FC L W 4' 1249 116 4' 4' 8' 312 29 8' 8' 12' 139 13 11.9' 11.9' 16' 78 7 15.9' 15.9' 20' 50 5 19.9' 19.9' Zone Lumens % Luminaire 0-30 1202 82.84% 0-40 1331 91.73% 0-60 1397 96.28% 60-90 30.7 2.12% 70-100 13.4 0.92% 90-120 9.59 0.66% 0-90 1428 98.41% 90-180 23.3 1.61% 0-180 1451 100% LDC La Quinta F R 1 Proj.# 523.01.02 Issue Date: 03-27-23 RLF-1107 1 " LED MICRO TRIMMED RECESSED DOWNLIGHT Fie FI Adjustable CCT LDC La Quinta F R2 Proj.# 523.01.02 II Issue Date: 03-27-23 RLF-1107 with RLT-1101-WH RLF-1107-SW5-WH complete set LED Micro Trimmed Downlights series is designed for residential and commercial spaces. No housing is required for remodel applications. Mounting frame with hanger bars optional for New Construction applications. Trim is sold separately and remote driver is included. Power supply rated for feed through wiring. O TRI� � � � 120V AC DIMMABLE RECESSED TRIM CANLESS IC RATED f /\T Lp7A0 (jjq � WET 50,000 YEAR � `1�1� us IM AIRTIGHT 2-1 /8" CUT-OUT -4° to 104° F INDOOR HOURS WARRANTY Intertek Elm SPECIFICATIONS INPUT VOLTAGE 120V AC WATTAGE 7 W LUMENS 500 Lm EFFICACY 71 Lm/W CRI 90+ BEAM ANGLE 30° DIMMING' TRIAC Dimmin CUT-OUT 2-1/8" 0 Effectively dim down to 10% Sold separately ' See published warranty terms for detailed information PERFORMANCE CCT selectable via switch on heatsink COLOR TEMPERATURE; I LUMEN4 I WATTAGE I EFFICACY I CRI t SW5 (27/30/35/40/50K)5 I 500 Lm I 7 W I 71 Lm/W I 90+ 114 CCT within +/-107 sSwitchable CCT ORDERING INFO STEP 1 - Light Engine with LED MODEL CCT / CRI RLF-1107 - SW5 SW5 - Switchable CCT ,A- (27/30/35/40/50) / 90 CRI STEP 2 - Trim (sold separately) MODEL FINISH RLT-1101 -Round Trim WH - White oftRLT-1106 - Square Trim BK - Black RATINGS IC, Airtight ENVIRONMENT Indoor- Dry, Damp & Wet CERTIFICATIONS cETLus, T24 Compliant LUMEN MAINTENANCE 50,000 hours INCLUDES Remote Driver OPTIONAL Trims and pre -mounting frame for new construction WARRANTY3 5 years 2700K 3000K 3500K 4000K 5000K Warm Neutral Cool White White White OPTIONAL ACCESSORY (Sold separately) MODEL RLH-23354-NC-UNI Multi -size new construction pre -mounting frame with bars. For cutout sizes: 2-1 /8", 2-7/8", 3-3/4" or5-1/4" NY15 Harbor Park Drive Main 800 527 7796 A 219 South 6th Ave Main 800 527 7796 support@jescolighting.com Port Washington, NY 11050 Fax 855 265 5768 I A City of Industry, CA 91746 Fax 855 265 5768 I T Tech Support 855 592 0029 © 2022 JESCO LIGHTING GROUP, LLC Specifications subject to change without notice REV. 04/27/2022 1 OF 2 RLF-1107 1 " LED MICRO TRIMMED RECESSED DOWNLIGHT TECHNICAL DRAWING C LIGHT ENGINE ONLY A B e e o -- - C REMOTE DRIVER D E TRIM OPTIONS (Sold separately) PART NUMBER RLT-1101 DESCRIPTION Round Trim ENVIROMENT Indoor, Wet DIMENSIONS A: V (22 mm) x B: 2-3/8" (60 mm) x C: 3/4" (19 mm) PART NUMBER RLT-1106 DESCRIPTION Square Trim ENVIROMENT Indoor, Wet DIMENSIONS A: 1" (22 mm) x B: 2-3/8" (60 mm) x C: 3/4" (19 mm) COMPATIBLE DIMMERS ffeioieSI06P M6621, 6672, IPL06-10Z PD-6WCL, DVCL-153P, SFTU-5A3P, DMD-LE3-D, CTCL-153P, DV-600P LDC La Quinta F R2 Proj.# 523.01.02 Issue Date: 03-27-23 DIMENSIONS A 1-7/8" 48 mm B 2-7/8" 73 mm C 7-1/4" 184 mm D 2-3/8" 60 mm TRIM INSTALLED E 3-3/8" 85 mm B t A -Aperture B B A -Aperture DIMENSIONS A 7" 178 mm B 6-7/8" 175 mm C 1-1/4" 32 mm D 1-1/4" 32 mm E Trade size 1/2" Knockout C C N Y 15 Harbor Park Pot Washington, NY 11050 aain 88552 55 265 5768 I C ve M00277796^ City of Indus219 South try, CA 91746 FAve ax 8855 265 5768 I O Tech Support o8555 5922 0029 ©2022 JESCO LIGHTING GROUP, LLC Specifications subject to change without notice REV. 04/27/2022 2OF2 CM407RA=S=P1R 4" LED SURFACE MOUNT PI I IqN K/InI II\IT f)IgV F)n\A/NII IC= I -IT \A/ITN PIR 0,FI\I0,nD O • Frosted PC Diffuser High Quality Aluminum CM407RA-S-PIR with PIR Motion Sensor LDC La Quinta F R3 Proj.# 523.01.02 Issue Date: 03-27-23 ` Field Adjustab 65' CCT H = 14ft - D=14ff EFFECTIVE INDUCTION AREA 'Isling for PC ffuser hole Inction ox The LED Surface Mount Flush Disk Downlight with Built-in PIR Sensor series is designed for residential and commercial applications. With ultra Low profile design measures a depth of only 1-1 /4" and ADA Compliant for Wall Mounting and is suitable for use in closets. Compliant with NEC Sec. 410.16 (A) (3) and 410.16 (C) (5), can easily install within a standard junction box or housing. The Frosted Polycarbonate Diffuser provides comfortable non -glare lighting with no hot spots. 5-Level field -selectable Color Temperature is available. O WEr L70 50,000 SYEAR c us ALUMINUM 120V AC 120 ° BEAM -4' to 104' F INDOOR GOOD FOR CLOSETS HOURS WARRANTY Intertek Elm SPECIFICATIONS INPUT VOLTAGE 120V AC WATTAGE low LUMENS 600 Lm EFFICACY 60 Lm/W CRI 90+ ' See published warranty terms for detailed information PERFORMANCE COLOR TEMPERATURE IOL SW5 (27 30 35/40/50K)5 ' 4CCTwithin+/-10% SSwitchable CCT LUMEN 1 WATTAGE I EFFICACY I CRI 600 Lm I low 1 60 Lm/W 1 90+ ORDERING INFO MODEL CM407RA-S-PIR-SW5-W I BEAM ANGLE 120° ENVIRONMENT Indoor - Dry & Wet CERTIFICATIONS cETLus, T24 Compliant LUMEN MAINTENANCE 50,000 hours WARRANTY' 5 years II2700K 000K 3500K 4000K 5000K Warm Neutral Cool White White White 219 005277796 N Y Pot Wassh ngtkon, NY 11050 gain 855 265 5768 I C ve M005277796^ Ciy South Industry, CA 91746 Fox 855 265 5768 I O TecphpSupport o855 5922 0029 © 2022 JESCO LIGHTING GROUP, LLC Specifications subject to change without notice REV. 03/25/2022 1 OF 2 CM407RA=S=P1R 4" LED SURFACE MOUNT GI 1 ICu nAnl INIT nI(ZV nn\A/NII 1(`WT \A/ITW DID CGNICnD HOW IT WORKS 65° H=14ft \ D=14ff EFFECTIVE INDUCTION AREA LDC La Quinta F R3 Proj.# 523.01.02 Issue Date: 03-27-23 The fixture turns ON whenever motion is detected, not only in the dark but also in daylight. The fixture will turn OFF after 30 seconds of no motion DIMENSIONAL DRAWINGS A DIMENSIONS A 6-7/8" 201 mm B 1-1/8" 28 mm C 1-3/4" 44 mm INSTALLATION J-BOX Each Box includes: • 4" Disk Light • 2 J-box Screws • 3 Wire Nuts 219 N Y Pot Wassh ngtkon, NY 11050 gain 855 265 5768 I C ve M005277796^ Ciy South Industry, CA 91746 Fox 855 265 5768 I O TecphpSupport 005277796 o855 5922 0029 © 2022 JESCO LIGHTING GROUP, LLC Specifications subject to change without notice REV. 03/25/2022 2OF2 La Quinta Resort Club Fitness Center Fixtures Finishes Toilets: ITEM NO. Kohler Dexter - Men's Antimicrobial Urinal K-PR5452-TlDS w/ Mach Tripoint Flushoreter Kohler Highcliff Men's and Womens Ultra Top Spud K-96057-SS-0 Antimicrobial Flushmoter Bowl Kohler Elongated Toilet Seat w/ AntimicrobialAgent K-4731-CA-0 Kohler Tripoint 1.28gpm Flushometer K-7531 Sinks: Kohler Brazn 23" rectangular semi -recessed vessel K-21060 bathroom sink FAUCETS: ADA SHOWERS: Kohler Purist 1.75 gpm multifunction handshower kit K-22178G-CP Suppiy elbow w/ valve K-22172-CP Kohler Purist MasterShower Thermostatic Valve trim K-T14488-4-CP Kohler 112" MasterShower Thermostic Mixing Valve K-2972-KS-CP SHOWERS Kohler Purist 1.75 gpm multifunction showerhead K-T14488-4-CP Kohler Purist MasterShower Thermostatic Valve trim K-2972-KS-CP Kohler 1/2" MasterShower Thermostic Mixing Valve K-2972-KS-CP SINK FAUCETS: Kohler Obio Toouchless faucet w/Kenesis sensor and mixer DC -powered K-1041377-SANA Proposed ADA Shower Bench 24" x 15" Foldng Shower ench ADA QUANTITY CEC** X 2 X X X 6 X 6 X 6 X 6 X X X �1 Phenoic Slatted Teak APFSSB-24015OPT X LOCKERS Existing 2 X 2 2 2 2 X 2 2 N X La Quinta Resort Club Fitness Center Fixtures Finishes Propae,ed Toilet Partitions Ironwood Mfg. Compact Laminate Partitions see attached X Proposed Floor Tile BedrocAans Barrique 8 x 40 wood look matte porcelain the in Vert Proposed Wall and Shower Tile Bedrasians 3 x 12 Matte Porcelain Tile Proposed Sink Counters Quartz floating counter w/5" mitered edge X **California Energy Commission KOHLEk Dexter TM Antimicrobial urinal with Macho Tripoint© flushometer Features • Fixture and touchless flushometer combination is engineered for optimal performance • Washout urinal • Antimicrobial finish inhibits the growth of mold-, mildew-, stain-, and odor -causing bacteria on the fixture surface. This product does not protect users against bacteria, viruses, or other disease organisms. Always clean and wash this product thoroughly before and after each use • 1 pint or 0,125 gpf (0.47 Ipf) • 314" (19 mm) top spud • Flush valve activation distance is factory -set • No external flush volume adjustment ensures water conservation • 24-hour automatic sentinel flush keeps trapway fresh • Mechanical override enables flushometer to be used manually even during a power outage • Chloramine and chlorine resistance on all rubber components exposeo to waterway • Locking stop cap provides protection against vandalism • 125-micron filter protects internal components • High back pressure vacuum breaker • Powered by 1.5V AA lithium batteries • For this combination, order K-5452-ETSS urinal and K-10UDOOD20 flushometer Material • Vitreous china urinal • Brass flush valve with durable Polished Chrome finish Technology • Electronic infrared sensor with Tripoint® technology for accurate activation • Patented piston technology for superior flush volume accuracy Water Conservation & Rebates • This product can help a building earn Water Efficiency points in LEED3 Green Building Rating System Included Components Additional Components: 2" outlet spud 314" inlet spud Hanger(s) K-PR5452-T1 DS �erS� ADA 4''r•�'``, ww N14O Mai Codes/Standards ASME Al 12.18.1/CSA B125.1 ASME Al 12.19.2/CSA B45.1 ASSE 1037/ASME Al 12.1037/CSA BI25.37 DOE - Energy Policy Act 1992 EPA WaterSense(s California Energy Commission (CEC) ADA ICC/ANSI A117.1 KOHLER® One -Year Limited Warranty See website for detailed warranty information. 1 -80a-4 KO H L ER (1 -800-45 6-4537) THE BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. KILER For the most current Specification Sheet, go to www.kohier.com. e 3-18 21023 20:16 - US/ KOHLER, Dexter TM Antimicrobial urinal with Macho Tripoint@ flushometer K-PR5452-T1 DS 2.3/8" (60 mm) a 2-9/16°-T-� (65 mm) 3/4 I PS 2 NPT Tap 17-1/2" (445 mm) Standard Installation 9-1/2" (241 mm) Max ADA Installation 11-3/8" (289 mm) 37-1 /2" (953 mm) 24" (610 mm) Standard 14-11/16" Installation (373 mm) 17" (432 mm) Max ADA Installation Floor - Technical Information All product dimensions are nominal Flush outlet Washout technology: Spud size 3/4, Inlet, Top Pressure and Supply Requirements Fixture pressure min 25 psi (172.4 kPa) (static): Fixture flow rate min: 25 gpm (94.6 Ipm) Fixture pressure 80 psi (551.6 kPa) Max (static): 5" (127 mm) Wall Hangers - 32-3/4" 30" (832 mm) (762 mm) To Floor for To Floor for Regular Retrofit Installation Installation 13-3/4` (349 mm) 2 NPT Tap r 3/4" (19 mm)� Outlet Detail 6" (152 mm) Notes Install this product according to the installation instructions. ADA compliant when installed to the specific requirements of these regulations. 1-800-4KC)HLER (1-800-456-4537) 1 yL BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. OF KOHLER, For the most current Specification Sheet, go to www.kohier.com. 3-18-2023 20:16 - U S/ KOHLER., TMU Ultra Top spud antimicrobial flushometer bowl K-96057-SS Features • E Ion gated bowl offers added room and comfort • Antimicrobial finish inhibits the growth of mold-, mildew-, stain-, and odor -causing bacteria on the fixture surface. This product does not protect users against bacteria, viruses, or other disease organisms. Always clean and wash this product thoroughly before and after each use • 1-1 /2" (38 mm) top spud • 10" x 7" (254 mm x 178 mm) water surface • 2-1/8" (54 mm) fully glazed trapway • 10" or 12" (254 or 305 mm) rough -in • 1.0 gpf (3.8 Ipf), 1.1 gpf (4.2 Ipf), 1.28 (4.8 Ipf), or 1.6 gpf (6.0 Ipf) depending on flushometer specified • Supports static load of 2,500 Ibs Material • Vitreous china Technology • Designed to outperform competitors in bowl cleanliness and p ug resistance • Maximum waste removal • Ernginnered for toilet seat cover removal • E.<cellent bowl rinse • E;Igineered to flush effectively in buildings with low supply p essure and flow • Maximum drain line carry at all flush volumes per ASME standard Installation • Replaces Highcliff K-4368, Highcrest K-4302 and Highline K-4405. Hoight and footprint may vary • Seat sold separately Included Components Additional Components: Bolt cap accessory pack Spud 3�tierSe�� ADA CSA B651 OBC Codes/Standards ASME Al 12.19.2/CSA B45.1 DOE - Energy Policy Act 1992 EPA WaterSense" California Energy Commission (CEC) ADA ICC/ANSI A117.1 CSA B651 OBC KOHLER@ One -Year Limited Warranty See website for detailed warranty information. Available Colors/Finishes Color tiles intended for reference only. Color Code Description 0 White 1-800-4KOHLER (1-800-456-4537) THE BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. OF KOHLER. For the most current Specification Sheet, go to www.kohler.com. 4-2-2023 21:27 - US KOHLER, 1-5/8" (41 mm) or 3-5/8" (8.2 mm) 1-1/2" Spud 3-5/8" (92 mm) or 5-5/8" (143 mm) _28" (711 mm) or 30" (762 mm) -26-1/8" (664 mm) 6-3/8" (162 mm) 16-5/8" (422 mm) 10" (254 mm) of Outlet or 12 (305 mm) Technical Information All product dimensions are nominal Toilet types Floor -mount Waste Outlet: Floor Bowl shape: Elongated Flush type. Flushometer valve siphon Spud size Inlet, Top Trap passageway: 2-1/8" (54 mm) Water surface size: 10" x 7" (254 mm x 178 mm) Rim to water 6" (152 mm) surface: Rough -in: 12" (305 mm) Seat -mounting 5-1/2" (140 mm) holes: HighcliffTM Ultra Top spud antimicrobial flushometer bowl K-96057-SS For Back -to -Back Toilif Installations 1 I I I I Use a 45' double Do not use a wye fitting. _ _ _ _ double sanitary tee 14-5/8" (371 mm) I Front of Bowl 10" (254 mm) 16-1 /4" (413 mm) 5-5/8" (143 mm) Notes Install this product according to the installation instructions. For back-to-back toilet installations: Use only a 450 double wye fitting. ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations. Plumbing codes may require elongated toilets and elongated, open -front seats in public bathrooms. Accessibility standards may require controls to be located on the open side of the toilet. Fixture Supply Requirements Min static pressure: 35 psi (241.3 kPa) Max static pressure: 80 psi (551.6 kPa) Min flowing 25 psi (172.4 kPa) pressure 1-800-4KOHLER (1-800-456-4537) THE BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. QF IC�JHLER- For the me st current Specification Sheet, go to www.kohler.com. 4-2-2023 21:27 - US KOHLER StrongholdT"" ® Commercial elongated toilet seat with antimicrobial agent K-4731-CA Features • Commercial elongated open -front seat without lid • Antimicrobial agent inhibits growth of odor -causing bacteria, mold, and mildew. This product does not protect users against bacteria, viruses, or other disease organisms. Always clean and wash this product thoroughly before and after each use • Ergonomic contour adds additional comfort • Integrated lift tab on seat edge offers a more hygienic solution for raising and lowering • I he check hinge will stop the seat from leaning back and applying pressure on a tank or a flushometer Material • Plastic construction Codes/Standards None Applicable KOHLER@ One -Year Limited Warranty See website for detailed warranty information. Available Colors/Finishes Color tiles intended for reference only. Color Code Description 0 White 1-800-41<01-ILER (1-800456-4537) THE BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. OF KOHLER. For the most current Specification Sheet, go to www kohler.cQm_ 5-2-2023 01:50 - US KOHLER Stronghold TM Commercial elongated toilet seat with antimicrobial agent K-4731-CA 5-1/2" Technical Information All product dimensions are nominal. Seat shape type: Elongated Seat front type: Open -front Seat hinge type: Check Seat -mounting 5-1/2" (140 mm) holes: 18-3/4" (476 mm) Notes Install this product according to the installation guide. 1-800-4KC)HLER (1-800-456-4537) THE BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. K�HLERa For the most current Specification Sheet, go to www.kohlor.com. 5-2-2023 01:50 - US KOHLER. Faucets Features • F ixture-mount design ' Includes a 30-year hybrid energy cell Material • Brass TripointIrM Exposed hybrid 1.28 gpf toilet flushometer K-7531 Technology ' Electronic infrared sensor with TripointT"' technology for accurate activation Slow -closing piston technology Installation • Intended for toilet installations with 1-1/2" spud coupling connection ADA CSA 13651 OBC Codes/Standards ASME Al 12.18.1/CSA B125.1 CSA B125.3 CSA B64 ASSE 1037/ASME Al 12.1037/CSA B125.37 ADA ICC/ANSI A117.1 CSA B651 OBC KOHLER@ One -Year Limited Warranty See website for oetailed warranty information. 1-800-4KOHLER (1-800-456-4537) THE BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. DE ��Rs For that most current Specification Sheet, go to www.kohler.com. 4-4-2023 01:22 - US/CA KOHLER. Faucets TripointTM Exposed hybrid 1.28 gpf toilet flushometer K-7531 *10-314" (273 mm) minimum with a 6" (152 mm) critical level above the fixture T 5/8" (16 mm) 1" IPS Supply 4-3/8" (111 mm) Min 5" (127 mm) Max 16-3/4" (425 mm) Max *11-1/2"r(152 (292 mm)mm) 0 3" (76 mm) Technical Information All produc: dimensions are nominal. Power source: Hybrid Energy Cell, included Pressure/fixture Supply Requirements Fixture pressure 80 psi (551.6 kPa) max (st-atic): Min flowing 25 psi (172.4 kPa) pressure: Min flow rate: 25 gpm (94.6 Ipm) 1-9/16" (40 mm) 2-1/4" (57 mm) Min 5" (127 mm) Max �1u (25 mm) 1` 0 2-1/2" (64 mm) Notes Install this product according to the installation guide. ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations. For ADA installations, rear grab bar may need to be split or shifted. 1-800-4KOHLER (1-800-456-4537) THE BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. OF IC�HLER� For the most current Specification Sheet, go to vrvrw kohler.com. 4-4-2023 01 :22 - US/CA KOHLEIL Features • No faucet holes; requires wall- or counter -mount faucet • Brass drain and color -matched brass drain cover • With overflow • Rectangular basin Material • Vitreous china Installation • Vessel Included Components Additional Components: 1377123-' Drain Assembly BraznTM 23" rectangular vessel bathroom sink K-21060 ADA�[!-;SA B651 LoBO Codes/Standards ASME Al 12.19.2/CSA B45.1 ADA ICC/ANSI A117.1 CSA B651 OBC KOHLER@ One -Year Limited Warranty See website for detailed warranty information. Available Colors/Finishes Color tiles intended for reference only. Color Code Description 0 White HB1 Honed Black 1-800-4KOHLER (1-800-456-4537) THE BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. �� ���� For the! most current Specification Sheet, go to www.kohler.com. 4-10-2023 21:56 - US/CA KOHLER, 16" (406 mm) 11-1 /2" --(292 mm) -� BraznTM 23" rectangular semi -recessed vessel bathroom sink K-21060 4-15/16" (125 mm) 3-1/2" i' 23" (584 mm)(89 mm) �- 7" 12-13/16" (178 mm) F(325 mm) i 13-1/2' 1-1/4" OD (343 mm) 3/8" Hots �_3/8" Cold 4" (102 mm) Technical Information All product dimensions are nominal. Installatio Vessel Drain hoi 1-3/4" (45 mm) Template: 1483026-7, required, includeo 1" (25 mm)_,! 4" (610 mm 34" —I`_- (864 mm) g■ ! 1 27" I (203 mm) (686 mm): Min ` Min 11" (279 mm) 9" (229 mm) Min Recommended ADA Installation Notes Install this product according to the installation instructions - NOTICE: Countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is not responsible for cutout errors when the incorrect cut-out template is used. ADA. OBC, CSA B651 compliant when installed to the specific requirements of these regulations. 1-800-4KOHLER (1-800-456-4537) O E B��D LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. THE OFIL OK For the most current Specification Sheet, go to www.ko_hier.com. 1-8-2023 22:27 - US/CA KOHLER. Faucets PuristT"" 24" four -function handshower kit, 1.75 gpm K-22178-G Features • Includes PuristTM 1.75-gpm multifunction handshower, 60" metal hose, 30" slidebar and contemporary slidebar trim • Multifunction showerhead and handshower each have advanced spray engines to provide three experiences: full coverage, pulsating massage, and silk spray • Full coverage spray produces an encompassing spray ideal for everyday use • Pulsating massage spray targets sore muscles to ease away aches and pains ' Silk spray releases a dense, luxurious spray ideal for rinsing ' Thumb tab allows for a smooth transition between sprays • combination of balance, weight, grip, and angle makes this hancishower comfortable and easy to use • NlasterCleanlm sprayface features an easy -to -clean surface that withstands mineral buildup • 1.75 gpm (6.6 Ipm) flow rate. ' 30" slidebar features adjustable mounting brackets for installation flexibility • Coordinates with Purist7m, StillnessTM, and Composed'"" faucets and accessories • Features a nonpositive shutoff: water -saving pause mode to temporarily reduce water flow Material • KOHLER finishes resist corrosion and tarnishing s a L q,i ADA Codes/Standards ASME A112.18.1/CSA B125.1 DOE - Energy Policy Act 1992 EPA WaterSense- California Energy Commission (CEC) ADA ICC/ANSI A117.1 KOHLER® Faucet Lifetime Limited Warranty See website for detailed warranty information. Available Colors/Finishes Color tiles intended for reference only. Color Code Description CP Polished Chrome BN VibrantTM' Brushed Nickel BL Matte Black 1-800-4KOHLER (1-800-456-4537) THE BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. OFKOHLER,, For the most current Specification Sheet, go to w�_kQbJq[ com. 4-5-2023 20:43 - US/CA KOHLERs Faucets 5-5/8" (143 mm) i 0 2-1/4"' � (57 mm)', 28" (71 1 mr 3" (76 mm) Technical Information All product dimensions a-e nominal. Handshower: Rated maximum flow: 1.75 gaUmin (6.6 I/min) Pressure: 45 psi (3.1 bar) Purist® 1.75 gpm multifunction handshower kit K-22178-G 3-7/8" (9A mm) 7— 11-3/16" (284 mm) G1/2 \�600 (1524 mm) Overall Length 1/2 0 5° (127 mm) Notes Install this product according to the installation instructions. IMPORTANT' The slide bar must be mounted to stud framing supports at both the top and bottom mounting locations. Plastic wall anchors will not support the slide bar. Do not use or depend on plastic wall anchors to attach the slide bar. Plumbing codes may require that an atmospheric vacuum breaker be installed in -line to handshowers. Consult with local codes. ADA, OBC compliant when installed to the specific requirements of these regulations. 1-800-4KOHLER (1-800-456-4537) THE BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. OF KOHLEk For the most current Specification Sheet, go to www.kohler.corn. 12-24-2019 10:34 - US KOHLER. Faucets Features • Advanced spray engine provides three experiences: full coverage, pulsating massage, and silk spray. • Full coverage spray produces an encompassing spray for everyday use and utilizes Katalystm air induction to create large, full drops. • Pulsating massage spray targets sore muscles to ease away aches and pains. • Silk spray releases a dense, luxurious spray ideal for rinsing. • Thumb tab allows for a smooth transition between sprays. • MasterClean"' spray nozzles prohibit mineral buildup for easy cleaning. • 1.75 gpm (gallons per minute) flow rate. • Shower arm and flange not included. • Coordinates with Purist®, Stillness®, and Composedo faucets and accessories. Material • KOHLER finishes resist corrosion and tarnishing. Installation • 1.r2-inch - 14 NPT connection. • Wall -mount. Water Conservation & Rebates • This product can help a building earn Water Efficiency points in the LEEDO Green Building Rating System. Recommended Products/Accessories K-7397 Shower Arm and Flange K-7395 Shower A*m and Flange K-933 Shower Arm and Flange K-934 Shower Arm and Flange Purist® 1.75 gpm multifunction showerhead K-22170-G .-W-A- Codes/Sta ndards ASME Al12.18.1/CSA B125.1 DOE - Energy Policy Act 1992 EPA WaterSenses California Energy Commission (CEC) KOHLER® Faucet Lifetime Limited Warranty See website for detailed warranty information. Available Colors/Finishes Color tiles intended for reference only. Color Code Description CP Polished Chrome SN Vibrant® Polished Nickel BN Vibrant® Brushed Nickel BV Vibrant® Brushed Bronze BL Matte Black RGD Vibrant Rose Gold TT Vibrant Titanium 1-800.4KOHLER (1-800-456-4537) THE BOLD LOOK Kohle, Co. reserves the right to make revisions without notice to product specifications. OF KOHLER, For the most current Specification Shoat, go to www.kohler.com. 12-24 2019 10:33 - US KOHLER. Faucets 4-5/16' (110 mm) 1 /2'-14 IVP Technical Information All product dimensions are nominal. Showerhead/Body Spray: Rated maximum flow: 1.75 gal/min (6.6 I/min) Purist@ 1.75 gpm multifunction showerhead K-22170-G -0 5-1/2' (140 mm) 0 G �0O Oho 0 a� 00, - �' 0 O O 0 g � 0 0 � Notes Install this product according to the installation instructions. 1-800-4KOHLER (1-800-456-4537) THE BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. OF KOHLER, For the most current Specification Sheet, go to www.kohier.com. 12-24-2019 10:33 - US KOHLER. Faucets Purist® MasterShower® Thermostatic Valve Trim K-T14488-4 Features • Includes face plate with handle. • Single handle controls temperature setting. • Supplied with ADA compliant metal lever handle. • Complements the Purists faucet and accessory collections. Material • Premium material construction with metal handle ensures . if� reliability and durability. • KOHLER finishes resist corrosion and tamishing. Installation • Trim set requires valve to complete installation. • Patented K-joint installation technology ensures consistent trim appearance, regardless of variability in valve rough -in. ADA I CSA B651 OBC Required Products/Accessories K-;?975-KS 3/4" Thermostatic Mixing Valve or K=?972-KS 1/2" Thermostatic Mixing Valve Codes/Standards ASME Al 12.18.1/CSA B125.1 ADA [CC/ANSI Al 17.1 CSA B651 OBC KOHLER® Faucet Lifetime Limited Warranty See website for detailed warranty information. Available Colors/Finishes Color tiles intended for reference only Color Code Description CP Polished Chrome SN Vibrant® Polished Nickel AF Vibrant® French Gold L BGD VibrantO Moderne Brushed Gold 0 BN Vibrant® Brushed Nickel LBV Vibrant® Brushed Bronze BL Matte Black 1-8004KOHLER (1-800-456-4537) THE BOLD LOOK Kohle- Co. reserves the right to make revisions without notice to product specifications. OF IWHLER For the most current Specification Sheet, go to www.kohler.com. 12-24-2019 23:04 - US/CA/MX KOHLER, Faucets ---r 2-5/8" (67 mm) Technical Information All product dimensions are nominal. Purist® MasterShower® Thermostatic Valve Trim K-T14488-4 Notes Install this product according to the installation instructions. ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations. 1-800-4KC HLER (1-800-456-4537) 1 HE BOLD LOOK Kohler Co reserves the right to make revisions without notice to product specifications. OF KOHLER. For the most current Specification Sheet, go to www.kohler.c9m. 12-24-2019 23:04 - US/CA/MX KOHLER, Faucets Features • High -flow thermostatic mixing valve. • Thermostatic technology automatically maintains outlet temperature during water pressure fluctuations and/or inlet water temperature changes. • Single handle temperature control, • 10.9 gpm flow rate at 45 psi. • 'r.-" female NPT inlet connections. • One Yz' female NPT outlet connection. • Service stops with integral filters. • Provides automatic anti -scald protection. • Adjustable comfort setting (preset at approximately 104 degrees Fahrenheit). • Integrated adjustable high temperature limit stop to control maximum water temperature. • Requires volume control (sold separately). • Requires thermostatic trim (sold separately). Material • Forged de-zincification-resistant brass body provides longterm reliability and resistance to aggressive water conditions. • Advanced materials selected for resistance to seizing or attack from aggressive water conditions. Installation • F,illy-serviceable from the front of the valve. • C,irtdclge is reversible for installations where hot and cold supplies are reversed. • Requires K-9663 twin ell (sold separately) when using a diverter bath spout. Required Accessories K-,977-K 3/4" Volume Control Valve or K-2974-K 112" Volume Control Valve MasterShower@ 112" Thermostatic Mixing Valve K-2972-KS Codes/Standards ASME Al 12.18.1/CSA B125.1 ASSE 1016/ASME Al 12.1016/CSA 13125.16 KOHLER® Faucet Lifetime Limited Warranty See website for detailed warranty information. USA/Canada: 1-800-4KOHLER (1-800-456-4537) THE BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. OF KOHLER. For the most current Specification Sheet, go to www.k�c hlQr_�_Qm. 3-7-2017 07:05 KOHLER. Faucets 4-5/8" (117 mm) 1/2" NPT Shower Outlet 112" NPT Hot lNet t 2-1/16" (52 mm) 1 7/16" (127 mm) 1-1/8" ("C79 mm) Technical Information All produc' dimensions are nominal. MasterShower@ 112" Thermostatic Mixing Valve K-2972-KS 3-3/4" (95 mm) Max 1/2" I 2-7/16' Finished (13 mm) (62 mm) Wall Min 2 1/" NPT Finished Cold Inlet Wall 3-7/8" (98 mm) T� 3-1/2' (89 mm) 1-3/16" (30 mm) 4-5/8" (117 mm) Notes Install this product according to the installation guide. For bath -only installations, valve may be installed upside down. USA/Canada: 1-800-4KOHLER (1-800-456-4537) THE BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. OF ICpHLER., For the most current Specification Sheet, go to www.kohler.c m. 3-7-2017 07:05 KOHLER. Faucets TM ob�D Touchless faucet w/Klnesis sensor and m xer, C- Features • Kinesis— technology with concealed sensor allows for a clean aesthetic and provides extraordinarily accurate and reliable actuation in varying installation environments • Below -counter valving reduces the faucet footprint and provides easier service • Design -forward aesthetic for commercial bathroom spaces • 0.5 gpm (1.9 Ipm) maximum flow rate • AA battery -powered; up to four-year battery life (approx. 105,000 cycles) • On -demand usage with 30-second max. continual run cycle to prevent vandalism and save water • Vandal -resistant aerator • 18' (457 mm) stainless steel braided flexible supply hose for easy installation • 4-7/8" (124 mm) spout reach • Complies with the Safe Drinking Water Act (SDWA) • I icludes four AA batteries Material • Brass spout • Cast brass valve Technology • KinesisIm sensor technology offers on -demand detection for maximum water savings Installation • Single -hole mounting • Includes spout assembly, grid drain, control box assembly, supply hose, mixer and standard mounting hardware Recommended Products/Accessories K-23726 Drain treatment K-23723 Faucet cleaner Optional Prod ucts/Accessories K-13478-A 4" escutcheon plate for InsightT"^ and Kinesis® faucet K-13478-13 4" escutcheon plate for InsightTTM and Kinesis® faucet K-13479-A 8" escutcheon plate for InsightTm and Kinesis@ faucet K-13479-B 8" escutcheon plate for InsightTM and KinesisG faucet Included Components Additional Components: 24154 7 129-A powered K-104B77-SANA ADA I CSA B651 OBC Codes/Standards ASME A112.18.1/CSA B125.1 NSF/ANSI/CAN 61 NSF/ANSIICAN 372 All applicable US Federal and State material regulations DOE - Energy Policy Act 1992 California Energy Commission (CEC) ADA ICC/ANSI A117.1 CSA B651 OBC KOHLERO One -Year Limited Warranty See website for detailed warranty information. Available Colors/Finishes Color tiles intended for reference only. Color Code Descriptlon CP Polished Chrome 1-80G-4KOHLER (1-800-456-4537) 1HL BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. IC�HLER: For the most current Specification Sheet, go to www.kohler.com. , 1-8-2023 20:54 - US/CA/MX O bI00 KOHLER. Faucets Touchless faucet w/KinesisT" sensor and mixer,DC- powered K-1 U4B77-SANA 0 2-5/16" (59 mm)_ (32 mm) Min 0 1-1/2 0 (38 mm) Max ' 1-3/4" _-(44 mm) Max 47-1/4" (1200 mm) Tube Length j 34-7/16" (875 mm) Sensor Cable Length 18" (457 mm) Hose Length 3/8" c� Compression Fitting 3/8„ - 3-3/16" Compression (81 mm) Fitting Technical Information All product dimensions are nominal Power source: Battery - DC, included Faucet: Flow rate: 0.5 gal/min (1.9 Vmin) Pressure: 60 psi (4.1 bar) Valve bod,, : Cast brass Drain inclUcled: Yes Spout: Spout reach: 4-7/8" (124 mm) 4- 7/8" (124 mm) , 9-1/4" (235 mm) 6-13/16" (173 mm) 0 2-1/8" (54 mm) 5-1/8" (130 mm) s 3-13/16" (97 mm) _ �1-1/4" OD 4-5/16" (110 mm) 3-11/16" (94 mm) Notes Install this product according to the installation instructions. A 1-1/4" (32 mm) minimum to 1-1/2" (38 mm) maximum diameter mounting hole is required. The minimum distance between the back of the faucet spout and the wall must be 1-3/4" (44 mm). This will allow proper clearance for setscrew access. The maximum distance between the bathroom sink basin edge to the base of the faucet spout must be 1-3/4" (44 mm). ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations. 1-800-4KGHLER (1-800-456-4537) THE BOLD LOOK Kohler Co. reserves the right to make revisions without notice to product specifications. KOHLERa For the most current Specification Sheet, go to vww.kohler.com. 1-8-2023 20:54 - US/CA/MX III ironwood Job Features • Headrail Braced partitions • 6 each partitions and 1 each urinal screen • Ironwood linear zero sightline • Doors with louvers • Hef-1 edge banding for compact laminate Component Details • 58" length doors • 58" length panels • 82" length pilasters • 58` length urinal screens Variances and Additional Notes QUOTE #51018 La Quints Resort Material Details • Wilsonart compact laminate • Rio 7947-60 pattern • Color coordinated HeH banding Hardware Details • Surface moon; hinges • Stainless steel hardware • Stirrup Brackets • Cast stainless screen brackets • Surface mount indicator slide latch • 8" bar pull, i per standard, 2 otherwise • Par lition maxi i lun -� clear death 66'. • Stalls deeper than 60' will require an additional pilaster at the back panel to wall connection. • Pricing includes one pattern. Additional patterns require a requote. • Quoted lead time is from the date we receive necessary approvals. Actual lead time detenrined at release. • Ironwood products are made -to -order items and can NOT be returned for credit. • For each cutout add: $55 for Plam, $75 for Compact Laminate, S100 for Solid Surface, S300 for Quartz. Other Considerations and Recommendations • ADA minimum 9" floor gap and 18' clear at ceiling (for fire suppression) may be required • Partial framed walls, if any, include a continuous panel bracket for privacy • Urinal screens wider than 24" require support (pilaster or post), • Stile and rail doors greater than 84" in length require mid -rail. • Stalls deeper than 60" typically require solicinq or an additional pilaster at the back panel to wall connection. • Ensure adequate barking at all wall, ceiling, and floor connections.