Loading...
BRER2023-1036BUILDING PERMIT DESIGN & DEVELOPMENT DEPARTMENT 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 PHONE (760) 777-7125 WWW.LAQUINTACA.GOV APPLIED DATE: 09/23/2023 ISSUED DATE: 09/27/2023 Permit Type: Permit Number: Property Address: APN: Legal Description Property Zoning: Valuation: Re-Roof 51150 AVENIDA CARRANZA BRER2023-1036 773061007 Lot 16 MB 18/69 SANTA CARMELITA VALE LA QUINTA UNIT 9 $12,451.00 RC, 16 Owner:DND MANAGEMENT 80811 CAM SANTA JULIANA, INDIO, CA 92253 Applicant:Juan F Partida 46855 desert villa st apt2 apt2, INDIO, CA 92201 Contractor:Juan F Partida / 1100081 46855 desert villa st apt2 apt2, INDIO, CA 92201 Declaration / Acknowledgement PRIOR TO THE ISSUANCE OF THIS PERMIT FOR CONSTRUCTION, ALTERATION, IMPROVEMENT, DEMOLITION, OR REPAIR THE OWNER, APPLICANT AND/OR CONTRACTOR UNDER PENALTY OF PERJURY HAVE AFFIRMED WHEN APPLICABLE, THROUGH THE SUBMITTAL OF FORMS OR BY OTHER ELECTRONIC MEANS, THE FOLLOWING: LICENSED CONTRACTOR OR OWNER-BUILDER DECLARATION (1 or 2) 1) They are licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, and the referenced License is in full force and effect, or; 2) That they are exempt from the Contractors’ State License Law for the reason(s) indicated by either (2)(a) and/or (2)(b), or (2)(c) where he or she is exempt from licensure by a valid exemption. [Section 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractors’ State License Law (Chapter (commencing with Section 7000) of Division 3 of the Business and Professions Code] Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).) a) As owner of the property, or my employees with wages as their sole compensation, will do all of or portions of the work, and the structure is not intended or offered for sale (Section 7044, Business and Professions Code: The Contractors’ State License Law does not apply to an owner of property who, through employees’ or personal effort, builds or improves the property, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the Owner-Builder will have the burden of proving that it was not built or improved for the purpose of sale.). b) As owner of the property, will be exclusively contracting with licensed c) Are exempt from licensure under the Contractors’ State License Law. As an Owner-Builder, they acknowledge that, except for their personal residence in which they must have resided in for at least one year prior to completion of the improvements covered by this permit, they cannot legally sell a structure built as an owner-builder if it has not been constructed in its entirety by licensed contractors. It is understood that a copy of the applicable law, Section 7044 of the Business and Professions Code, is available upon request when this application was submitted at the following Web site: http://www.leginfo.ca.gov/calaw.html. DECLARATION REGARDING CONSTRUCTION LENDING AGENCY (If applicable) A construction lender will be used for completion of the improvements covered by this permit and the name and information of which is on file for public inspection during the regular business hours of the public entity. Failure of the applicant to indicate the construction lender on the application does not relieve that person of the requirement to give the construction lender preliminary notice from that duty. WORKERS’ COMPENSATION DECLARATION (1, 2 or 3) WARNING: FAILURE TO SECURE WORKERS’ COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000), IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY’S FEES. 1) Has and will maintain a certificate of consent to self-insure for workers’ compensation, issued by the Director of Industrial Relations as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 2) Has and will maintain workers’ compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 3) Certifies that, in the performance of the work for which this permit is issued, shall not employ any person in any manner so as to become subject to the workers’ compensation laws of California, and agree that, if should become subject to the workers’ compensation provisions of Section 3700 of the Labor Code, shall forthwith comply with those provisions. NOTICE TO APPLICANT (1, 2 and 3) 1) Each person upon whose behalf this application was made, each person at whose request and for whose benefit work is being performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and employees for any act or omission related to the work being performed under or following issuance of this permit. 2) Any permit issued as a result of this application becomes null and void if work is not commenced within 360 days from date of issuance of such permit, or if cessation of work for 180 days will subject permit to cancellation. On or after January 1, 2019, every permit issued shall become invalid unless the work on the site authorized by such permit is commenced within 12 months after its issuance, or if the work authorized on the site by such permit is suspended or abandoned for a period of 12 months after the time the work is commenced. 3) Certified that they read the application and state that the information provided is correct. Agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above-mentioned property for inspection purposes. IMPORTANT: An Application for Permit was made to the Building Official, subject to the conditions and restrictions set forth at the time of application, which is now hereby an Issued Permit. If any part of the information being supplied on this permit is inaccurate or untrue, please contact the City of La Quinta at (760) 777-7125 immediately for correction. Printed: 5/13/25 11:48 am Page 1 of 3 Permit Type: Permit Number: Property Address: Re-Roof BRER2023-1036 51150 AVENIDA CARRANZA BUILDING PERMIT REROOF WITH SHINGLES [CRRC: 0890-0012] ROOF ASSEMBLY SHALL HAVE A CLASS “A” FIRE RATING PER LQMC §8.02.040. 2022 CALIFORNIA BUILDING CODES. Use of Permit Construction Details 2300Re-Roof Area Square Footage RCZoning MHDRGeneral Plan Within La Quinta LimitsCity Limits SANTA CARMELITA VALE LA QUINTA UNIT 9 Subdivision Name 16Lot Number 96994Centerlines 676.527Lot Size Lot 16 MB 18/69 SANTA CARMELITA VALE LA QUINTA UNIT 9 Legal Description Valuation Details Type Group Sq Ft Value Financial Information Fee AmountFee Amount PaidInvoice No. INV-00000942 $119.05 Re-Roof PC $119.05 $5.29 Credit Card Convenience Fee $5.29 $73.53 Re-Roof $73.53 $8.00 Technology Enhancement Fee $8.00 $11.00 Digital Archiving and Records Management Fee - OTC $11.00 $216.87 $216.87 Total for Invoice INV-00000942 Grand Total for Permit $216.87 $216.87 Workflow / Inspections Workflow Step / Action Name Action Type Start Date End Date Application Completeness Check v.1 09/25/2023 9:14 09/26/2023 9:20 Submittal Document Verification v.1 Generic Action 09/25/2023 9:14 Plan Check v.1 09/26/2023 0:00 09/26/2023 9:22 Permit Tech Review v.1 Receive Submittal 09/26/2023 0:00 09/26/2023 9:22 Permit Issuance v.1 09/26/2023 9:22 09/27/2023 8:54 Contractor / Owner-Builder Information v.1 Generic Action 09/26/2023 9:22 Verify & Invoice Fees v.1 Generic Action 09/26/2023 9:22 Ready to Issue v.1 Generic Action 09/26/2023 9:22 Verify Fee Payment & Issue Permit v.1 Generic Action 09/27/2023 8:54 Print, Attach, and Email Building Permit v.1 Create Report 09/27/2023 8:54 09/27/2023 8:54 Re-Roof Inspections v.1 10/11/2023 0:00 10/18/2023 13:31 Pre-Roof v.1 Inspection 10/11/2023 0:00 10/13/2023 9:12 Roof Nail v.1 Inspection 10/14/2023 0:00 10/17/2023 9:00 Roof Nail v.2 Inspection 10/17/2023 0:00 10/18/2023 13:31 Final Inspections v.1 10/28/2023 0:00 10/31/2023 9:11 Final Re-Roof v.1 Inspection 10/28/2023 0:00 10/31/2023 9:11 Printed: 5/13/25 11:48 am Page 2 of 3 Permit Type: Permit Number: Property Address: Re-Roof BRER2023-1036 51150 AVENIDA CARRANZA BUILDING PERMIT Construction or work for which a permit is required shall be subject to inspection by the building official and such construction or work shall remain visible and able to be accessed for inspection purposes until approved. Approval as a result of an inspection shall not be construed to be an approval of a violation of the provisions of the applicable code and other ordinances of the jurisdiction. Inspections presuming to give authority to violate or cancel the provisions of the applicable code and other ordinances of the jurisdiction shall not be valid. It shall be the duty of the owner or the owner's authorized agent to cause the work to remain visible and able to be accessed for inspection purposes. Neither the building official nor the jurisdiction shall be liable for expense entailed in the removal or replacement of any material required to allow inspection. It shall be the duty of the holder of the building permit or their duly authorized agent to notify the building official when work is ready for inspection. It shall be the duty of the permit holder to provide access to and means for inspections of such work that are required by this code. Inspections A building or structure shall not be used or occupied in whole or in part, and a change of occupancy of a building or structure or portion thereof shall not be made, until the building official has issued a certificate of occupancy therefor as provided herein. Issuance of a certificate of occupancy shall not be construed as an approval of a violation of the provisions of the applicable code and other ordinances of the jurisdiction. Certificates presuming to give authority to violate or cancel the provisions of this code or other ordinances of the jurisdiction shall not be valid. Certificate of Occupancy A person shall not make connections from a utility, a source of energy, fuel, or power, or a water system or sewer system to any building or system that is regulated by the applicable code and other ordinances of the jurisdiction for which a permit is required, until approved by the building official. Service Utilities Printed: 5/13/25 11:48 am Page 3 of 3 PRESCRIPTIVE RESIDENTIAL ALTERATIONS THAT DO NOT REQUIRE HERS FIELD VERIFICATION CEC-CF1R-ALT-05-E CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 CERTIFICATE OF COMPLIANCE This compliance document is only applicable to simple alterations that do not require HERS verification for compliance. When HERS verification is required, a CF1R-ALT-01 shall first be registered with a HERS Provider Data Registry. Alterations to Space Conditioning Systems that are exempt from HERS verification requirements may use the CF1R-ALT-05 and CF2R- ALT-05 Compliance Documents. Possible exemptions from duct leakage testing include: less than 25 feet (ft) of ducts were added or replaced; or the existing duct system was insulated with asbestos; or the existing duct system was previously tested and passed by a HERS Rater. If space conditioning systems are altered and are not exempt from HERS verification, then a CF1R-ALT-02 must be completed and registered with a HERS Provider Data Registry. Alterations that utilize closed cell Spray Polyurethane Foam (ccSPF) with a density of 1.5 to less than 2.5 pounds per cubic foot having an R -value greater than 5.8 per inch, or open cell Spray Polyurethane Foam (ocSPF) with a density of 0.4 to less than 1.5 pounds per cub ic foot having an R- value of 3.6 per inch, shall complete and register a CF1R-ALT-01 with a HERS Provider Data Registry. If more than one person has responsibility for installation of the items on this certificate, each person shall prepare and s ign a certificate applicable to the portion of construction for which they are responsible. Alternatively, the person with chief responsibility for construction shall prepare and sign this certificate for the entire construction. All applicable Mandatory Measures shall be me t. Temporary labels shall not be removed before verification by the building inspector. Project Details Field Name Data Entry Field Name Data Entry Project Name Enforcement Agency Dwelling Address Permit Number City and Zip Code Date Permit Issued DND Management 51150 Avenue Carranza La Quinta, 92253 La Quinta bulding and Saftey BRER2023-1036 N/A PRESCRIPTIVE RESIDENTIAL ALTERATIONS THAT DO NOT REQUIRE HERS FIELD VERIFICATION CEC-CF1R-ALT-05-E CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 A. GENERAL INFORMATION Field Field Name Data Entry 01 Project Name 02 Date Prepared 03 Project Location 04 Building Front Orientation (deg or cardinal) 05 CA City 06 Number of Altered Dwelling Units 07 Zip Code 08 Fuel Type 09 Climate Zone 10 Total Conditioned Floor Area (ft2) 11 Building Type 12 Slab Area (ft2) 13 Project Scope DND Management RE Roof 09/22/2023 51150 Avenida Carranza N/A La Quinta 0 92253 Natural Gas 15 1500 Single Family 2200 Re Roof PRESCRIPTIVE RESIDENTIAL ALTERATIONS THAT DO NOT REQUIRE HERS FIELD VERIFICATION CEC-CF1R-ALT-05-E CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 C. Roof Replacement (Section 150.2(b)1H) Field Field Name Data Entry 1 Data Entry 2 Data Entry 3 01 Method of Compliance 02 Roof Pitch 03 Exception 04 CRRC Product ID Number 05 Product Type 06 R-value Deck Insulation 07 Proposed Initial Solar Reflectance 08 Proposed Aged Solar Reflectance 09 Proposed Thermal Emittance 10 Proposed SRI (Optional) 11 Minimum Required Aged Solar Reflectance 12 Minimum Required Thermal Emittance 13 Minimum Required SRI (Optional) NOTES: •Roof area covered by building integrated photovoltaic (PV) panels and solar thermal panels are exempt from the above Cool Roof requirements. •Liquid field applied coatings must comply with installation criteria from Section 110.8(i)4. 3/12 0890-0012 shingle N/A 0.23 24 0.93 24 0.23 0.93 PRESCRIPTIVE RESIDENTIAL ALTERATIONS THAT DO NOT REQUIRE HERS FIELD VERIFICATION CEC-CF1R-ALT-05-E CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 Documentation Author's Declaration Statement 1.I certify that this Certificate of Compliance documentation is accurate and complete. Documentation Author Name: Documentation Author Signature: Company: Signature Date: Address: CEA/ HERS Certification Identification (if applicable): City/State/Zip: Phone: Responsible Person's Declaration Statement I certify the following under penalty of perjury, under the laws of the State of California: 1.The information provided on this Certificate of Compliance is true and correct. 2.I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design identified on this Certificate of Compliance (responsible designer). 3.The energy features and performance specifications, materials, components, and manufactured devices for the building design or system design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of Regulations. 4.The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application. 5.I understand that a registered copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the building, and made available to the enforcement agency for all applicable inspections. I understand that a registered copy of this Certificate of Compliance is required to be included with the documentation the builder provides to the building owner at occupancy. Responsible Designer Name: Responsible Designer Signature: Company: Date Signed: Address: License: City/State/Zip: Phone: For assistance or questions regarding the Energy Standards, contact the Energy Hotline at: 1 -800-772-3300 Juan F Partida Desert Roofing Solutions Inc 09/25/2023 46585 Desert Villa St apt#2 (760)777-5345 Juan F Partida Desert Roofing Solutions Inc 46585 Desert Villa St apt#2 C39 1100081 Indio Ca 92201 (760)777-5345 C39 1100081 Indio, CA 92201 CERTIFICATE OF COMPLIANCE – USER INSTRUCTIONS CF1R-ALT-05-E Prescriptive Residential Alterations That Do Not Require HERS Field Verification (Page 1 of 13) CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 CF1R-ALT-05-E User Instructions NOTE: If more space is needed, print a duplicate page and fill in. Minimum requirements for prescriptive alteration compliance can be found in Building Energy Efficiency Standards Section 150.2(b)1. Completing these forms will require that you have the Reference Appendices for the 2019 Building Energy Efficiency Standards (P400-2018-020). This document contains the Joint Appendices which are used to determine climate zone and to complete the section for opaque surfaces. When the term CF1R is used it means the CF1R-ALT-05. Worksheets are identified by their entire name and subsequently by only the worksheet number, such as ENV-02. Instructions for sections with column numbers and row letters are given separately. If any part of the alteration does not comply, prescriptive compliance fails, in which case the performance compliance approach must be used in an attempt to achieve compliance. A.General Information 1.Project Name: Identifying information, such as owner’s name. 2.Date Prepared: Date of document preparation. 3.Project Location: Legal street address of property or other applicable identifying information. 4.Building Front Orientation: Building fron t orientation expressed in degrees, where North = 0, East = 90, South = 180, and West = 270. Indicate cardinal if it is a subdivision project built in multiple orientations. The standards (section 100.1) include the fo llowing additional details for determining orientation: •Cardinal covers all orientations (for buildings that will be built in multiple orientations); •North is oriented to within 45 degrees of true north, including 45 degrees east of north; •East is oriented to within 45 degrees of true east, including 45 degrees south of east; •South is oriented to within 45 degrees of true south, including 45 degrees west of south; •West is oriented to within 45 degrees of true west, including 45 degrees north of west. 5.CA City: Legal city/town of property. 6.Number of Altered Dwelling Units: 1 for single-family 7.Zip Code: 5-digit zip code for the project location (used to determine climate zone). 8.Fuel Type: Natural Gas, Liquefied Propane Gas, or Electricity. CERTIFICATE OF COMPLIANCE – USER INSTRUCTIONS CF1R-ALT-05-E Prescriptive Residential Alterations That Do Not Require HERS Field Verification (Page 2 of 13) CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 9. Climate Zone: From Reference Appendices, Joint Appendix, JA2.1.1. 10. Total Conditioned Floor Area: Enter the new conditioned floor area in square feet (ft2), as measured from the outside of exterior walls of the dwelling unit or building being altered. 11. Building Type: Single Family (includes duplex), or Multi-Family (a building that shares common walls and common floors or ceilings). 12. Slab Area: Area of the first floor slab (if any) in square feet (ft2). 13. Project Scope: Insulation, Roof Replacement, Fenestration/Glazing, Heating System, Cooling System, Duct System, and/or Water Heating System alteration. B. Building Insulation Details (Section 150.2(b)1) 1. Tag/ID: A label (if any) from the plans, such as A1.4 or wall. 2. Assembly Type: Roof, Ceiling, Wall, or Floor. 3. Frame Type: Wood or Metal. 4. Frame Depth: Nominal dimensions of framing material in inches such as 2x4, 2x6, 2x8, 2x10. 5. Frame Spacing: 16 or 24 inches on center. 6. Proposed Cavity R-value: Insulation installed between framing. Proposed Continuous Insulation R-value: R-value of rigid or continuous insulation (not interrupted by framing). See Table 4.3.4. of Reference Appendices, Joint Appendix, for metal frame construction. NOTE: Section 110.8(d) specifies that if adding insulation to an existing attic, the resulting attic insulation must total R-22. However, the amount of insulation required is limited to the amount of room available for insulation without conflicting with Building Code Section 1203.2. 7. Proposed U-factor: The U-factor for the entire assembly. 8. Joint Appendix JA4 Reference Table: Table number used to determine the R-value or U-factor (e.g., an attic assembly is 4.2.1). 9. Joint Appendix JA4 Reference Cell: Cell number used to determine the R-value or U-factor (e.g., an R-38ceiling with 24-inch on center framing is A21). 10. Required U-factor: From the requirements in Sections 110.8 and 150.0. 11. Comments: Any notes regarding location, unique conditions, or attachments. CERTIFICATE OF COMPLIANCE – USER INSTRUCTIONS CF1R-ALT-05-E Prescriptive Residential Alterations That Do Not Require HERS Field Verification (Page 3 of 13) CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 C. Roof Replacement (Prescriptive Alteration, Section 150.2(b)1H) When 50% or more of the roof is being replaced the roofing requirements are triggered. Any areas of roof covered by building integrated photovoltaic panels and solar thermal panels are exempt, but the area of roof not covered by photovoltaic panels would still need to meet any applicable cool roof requirements. Additionally, there are many alternatives/exceptions to when a cool roof is required. When the roof is steep-sloped (pitch greater than or equal to 2:12) the roof requirements include a cool roof in climate zones 4 and 8-15. The minimum requirement is 0.20 Aged Solar Reflectance, 0.75 Thermal Emittance, or a minimum SRI of 16. 1. Method of Compliance: Indicate if the method of compliance is going to be based on Aged Solar Reflectance and Thermal Emittance , the Solar Reflectance Index (SRI), or an Exception. 2. Roof Pitch: Expressed as 4:12, for example, which means the roof rises 4 fo ot within a span of 12 feet. When roofs have multiple pitches the requirements are based on the pitch of 50 percent or more of the roof. 3. Exception: If meeting one of the exceptions. Indicate which exception is, or will be, met. EXCEPTIONS AND ALTERNATIVES FOR STEEP SLOPE ROOFS: (a) Mass roof 25 pounds per square foot (lbs/ft2) or greater (uncommon situation such as sod roof); (b) Roof has ceiling assemblies with a U-factor less than or equal to 0.025 or R-38 insulation; (c) Roof has a radiant barrier not installed directly above spaced sheathing meeting 150.1(c)2; (d) Nin Climate Zones 2. 4. 9. 10, 12 and 14, no ducts are installed in the attic; or (e) R-2 continuous insulation above the roof deck. In climate zones 4 and 6-15, when there is a low-sloped roof (pitch less than 2:12) the cool roof requirements are for a minimum Aged Solar Reflectance of 0.63, a minimum 0.75 Thermal Emittance, or a minimum SRI of 75. EXCEPTIONS AND ALTERNATIVES FOR LOW SLOPE ROOFS: (a) Mass roof 25 pounds per square foot (lbs/ft2) or greater (uncommon situation such as sod roof); (b) No ducts are installed in the attic; or (c) Roof deck installation trade off—by installing roof deck insulation, a lower aged solar reflectance is required: In Climate Zones 6 and 7 R -2 (0.60), R-4 (0.55), R-6 (0.50), R-8 (0.45), R-10 (no requirement); In Climate Zones 2, 4 and 8-15 R-16 (0.60), R-18 (0.55), R-20 (0.50), R-24 (no requirement). CERTIFICATE OF COMPLIANCE – USER INSTRUCTIONS CF1R-ALT-05-E Prescriptive Residential Alterations That Do Not Require HERS Field Verification (Page 4 of 13) CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 NOTE: If one of the exceptions above has been selected th en the rest of Section C. is not required. 4. CRRC Product ID Number: The CRRC Product ID Number is obtained from the Cool Roof Rating Council’s Rated Product Directory. Products are listed by manufacturer, brand, type of installation, roofing material, and color, as well as product performance. 5. Product type: See Cool Roof Rating Council’s directory. Generally product types include single-ply roof, wood shingles, asphalt roof, metal roof, tile roof. 6. R-value Deck Insulation: If one of the exceptions selected includes adding roof deck insulation, indicate the R -value of the insulation. 7. Proposed Initial Solar Reflectance: Based on the product chosen from the Cool Roof Rating Council’s Rated Product Directory. If using default assumption indicate N/A since the Aged Solar Reflectance is available. 8. Proposed Aged Solar Reflectance: Value is from the Cool Roof Rating Council’s Rated Product Directory. If the aged value is not available, calculate the Aged Solar Reflectance using the Solar Reflectance Index (SRI) Calculator located on the California Energy Commission website or the aging equation ρaged=[0.2+β[ρinitial-0.2], where ρinitial = the initial solar reflectance and soiling resistance β is listed by product type below. VALUES OF SOILING RESISTANCE β BY PRODUCT TYPE Product Type CRRC Product Category β Field-Applied Coating Field-Applied Coating 0.65 Other Not A Field-Applied Coating 0.70 9. Proposed Thermal Emittance: From the product specification default value. If using a calculated Solar Reflectance Index (SRI) place the Thermal Emittance used to calculate SRI. 10. Proposed Solar Reflectance Index (SRI): It is optional to meet the SRI but if chosen to do so, use the Solar Reflectance Index (SRI) Calculator found on the California Energy Commission website. 11. Minimum Required Aged Solar Reflectance: Based on climate zone and roof slope. 12. Minimum Required Thermal Emittance: Based on climate zone and roof slope. 13. Minimum Required SRI: Based on climate zone and roof slope. NOTE: If the cool roofing requirements will be met by a liquid field applied coating, Section 110.8(i)4 requires the coating be applied across the entire roof surface and meet the dry mil thickness or coverage recommended by the manufacturer. D. Fenestration/Glazing Allowed Areas and Efficiencies CERTIFICATE OF COMPLIANCE – USER INSTRUCTIONS CF1R-ALT-05-E Prescriptive Residential Alterations That Do Not Require HERS Field Verification (Page 5 of 13) CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 The Alteration and Fenestration Type will affect how the standards apply and whether the fenestration area is limited. Percentages are determined as Conditioned Floor Area (CFA) x 0.20 = total square footage (ft2) of fenestration allowed (20 percent). Depending on the climate zone, if west- facing fenestration is limited (in climate zones 2, 4, 6-15), it is limited to a maximum of 5 percent. The overall total fenestration area is limited to 20 percent, not 25 percent. Fenestration areas are expressed in square feet, not square inches. 1.Alteration Type: Indicate the type of fenestration alteration - adding fenestration/glazing, replacing fenestration/glazing, adding fenestration/glazing less than or equal to 75 ft2 windows, replacing fenestration/glazing less than or equal to 75 ft2 window, adding fenestration/glazing less than or equal to 16 ft2 skylight and or replacing fenestration/glazing skylights 2.Maximum Allowed Fenestration Area for All Orientations (ft2): The maximum allowed fenestration area is 20 percent. Depending on the type of fenestration and the alteration type, this field may have values such as 75 square feet (ft2) or 16 ft2. 3.Maximum Allowed West-Facing Fenestration Area Only: The Maximum Allowed West-Facing Fenestration Area is 5 percent of the conditioned floor area (used in climate zones 2, 4, and 6-15). NOTE: (1) If adding fenestration/glazing less than or equal to 16 ft2 skylight, enter NA (2) West includes any vertical fenestration oriented to within 45 degrees of true west, including 45 degrees south of west. F or skylights, west also includes any skylight area facing any direction with a pitch of less than 1:12 4.Existing Fenestration Area for All Orientations: Enter the area, in square feet, of the existing fenestration/glazing. Existing West-Facing Fenestration Area: Enter the area, in square feet (ft2), of the existing west-facing fenestration/glazing. If project has no existing west-facing fenestration then enter “0”. 5.Maximum Allowed U-factor: Maximum U-factor from Table 150.1-A, Package A. This field will almost always be 0.30 unless the U-factor will be the area weighted average, CF1R-ENV-02-E, with other higher fenestration windows. For skylights this will be 0.55. NOTE: (1) If meeting Exception 2 to Section 150.2(b)1A (adding less than or equal to 16 square feet (ft2) skylights), enter 0.55. (2) If meeting Exception 1 to Section 150.2(b)1B (replacing less than or equal to 75 square feet (ft2) windows), enter 0.40. (3) If meeting Exception 2 to Section 150.2(b)1B (replacing skylights), enter 0.55. 6.Maximum Allowed SHGC: Maximum solar heat gain coefficient (SHGC) from Table 150.1-A. This field will almost always be either 0.23 or N/A, depending on climate zone. N/A means there is no maximum SHGC required in this climate zone. The SHGC will be the area weighted average, CF1R-ENV-02-E, with other higher fenestration windows. For skylights this will be 0.30. NOTE: (1) If meeting Exception 2 to Section 150.2(b)1A (adding less than or equal to 16 square feet (ft2) skylights), enter 0.30. (2) If meeting Exception 1 to Section 150.2(b)1B (replacing less than or equal to 75 square feet (ft2) windows), enter 0.35. CERTIFICATE OF COMPLIANCE – USER INSTRUCTIONS CF1R-ALT-05-E Prescriptive Residential Alterations That Do Not Require HERS Field Verification (Page 6 of 13) CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 (3) If meeting Exception 2 to Section 150.2(b)1B (replacing skylights), enter 0.30. 7.Comments: Note any special location or comment here. E.Fenestration/Glazing Proposed Areas and Efficiencies - Add (Section 150.2(b)1A) 1.Tag/ID: A label (if any) from the plans, such as W1. 2.Fenestration Type: Indicate the type of fenestration construction e.g., Fixed Window, Operable Window, or Skylight. NOTE: Doors with glazing are counted in one of two ways. A door with 25 percent or more glazing is considered a glazed door and is counted as the entire door area. A door with less than 25 percent glazing can be counted as the entire door area or can be calculated as the actual glass area with a 2-inch (0.17 ft2) frame all around. 3.Frame type: Metal, metal thermal break, or nonmetal. 4.Dynamic Glazing: Indicate if the fenestration has integrated shading device, chromogenic glazing or none for no dynamic gla zing. Chromogenic glazing shall be considered separately from other fenestration types. 5.Orientation (North, East, South, West): The definitions in the Energy Standards include these specific details - •North is oriented to within 45 degrees of true north, including 45 degrees east of north; •East is oriented to within 45 degrees of true east, including 45 degrees south of east; •South is oriented to within 45 degrees of true south, including 45 degrees w est of south; •West is oriented to within 45 degrees of true west, including 45 degrees north of west. NOTE: Skylights in a roof pitch greater than 1:12 can be included as facing the same orientation as that portion of the roof angle. If the skylight is in a roof with a pitch less than 1:12, the skylight is assumed to face west. 6.Number of Panes: Indicate the number of panes for each Tag/ID; is it single, double, or triple pane window? 7.Proposed Fenestration Area (ft2): Indicate the area in square feet (ft2) of each exterior fenestration type, excluding west-facing fenestration. 8.Proposed West Facing Fenestration Area (ft2): In climate zones 2, 4, 6-15, indicate the area in square feet (ft2) of each exterior west-facing fenestration type separately. 9.Proposed U-factor: Enter (a) the National Fenestration Rating Council (NFRC) U-factor based on the proposed brand and type of fenestration using NFRC certified values, (b) the default value from Table 110.6-A or Equation NA6-1, or (c) the weighted average U-factor calculated on form CF1R-ENV-02-E. CERTIFICATE OF COMPLIANCE – USER INSTRUCTIONS CF1R-ALT-05-E Prescriptive Residential Alterations That Do Not Require HERS Field Verification (Page 7 of 13) CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 For the exceptions, up to 3 square feet (ft2) of tubular skylights and up to 3 ft2 of glazing in a door enter N/A, and for up to 16 ft2 of skylight, enter 0.55. If any products (other than the exceptions) have a higher U-factor than 0.30, first complete a form CF1R-ENV-02 to calculate the area-weighted average U-factor and attach it to this CF1R. NOTE: Dynamic glazing is a glazing system that changes its performance U-factor and SHGC based on the physical environment. Dynamic glazing includes chromogenic glazing or integrated shading systems (this does not include internally or externally mounted shading devices). If using dynamic glazing, use the lowest tested U-factor and solar heat gain coefficient (SHGC) in Columns 9 and 11. 10.Proposed U-factor Source: National Fenestration Rating Council (NFRC), Table 110.6-A, Equations NA6-1, or Area-Weighted Average Worksheet (ENV-02). The source of the U-factor data for the fenestration product. 11.Proposed SHGC: In climate zones 2, 4, 6-15 enter the solar heat gain coefficient (SHGC) from (a) National Fenestration Rating Council (NFRC), or (b) default value from Table 110.6-B or Equation NA6-2, or (c) the weighted average SHGC calculated on form CF1R-ENV-02. For the exceptions – up to 3 square feet (ft2) of tubular skylights and up to 3ft2 of glazing in a door, enter N/A; up to 16ft2 of skylight, enter 0.30. If any products (other than the exceptions) have a higher SHGC than required by Table 150.1-A, first complete a form CF1R-ENV-02 to calculate the area-weighted average SHGC and attach it to this CF1R. 12.Proposed SHGC Source: National Fenestration Rating Council (NFRC), Table 110.6-A, Equations NA6-1, or Area-Weighted Average Worksheet (ENV-02). The source of the U-factor data for the fenestration product. 13.Exterior Shading Device: If exterior shading devices are used to meet the SHGC requirement, indicate the type of device (from Table S -1 of CF1R-ENV-03 Solar Heat Gain Coefficient Worksheet) and attach an ENV-03. NOTES: (1)An exterior shading device is not used for products with an NFRC rated U-factor and SHGC; based on a factory integrated shading device. (2)If using an overhang for south-facing glazing, the glazing must be fully shaded at solar noon on August 21 and substantially exposed to direct sunlight at solar noon on December 21 (see Residential Compliance Manual, Section 3.3.6.3). 14.Combined SHGC from CF1R-ENV-03: If exterior shading devices are combined with the solar heat gain coefficient (SHGC) value of the fenestration to meet the prescriptive SHGC requirements (as indicated by a value in column E. 13), indicate the SHGC calculated on form CF1R-ENV-03 and attach the form for each window with an exterior shading device. To determine compliance with allowable fenestrations areas and efficiencies, complete rows 15 -32. CERTIFICATE OF COMPLIANCE – USER INSTRUCTIONS CF1R-ALT-05-E Prescriptive Residential Alterations That Do Not Require HERS Field Verification (Page 8 of 13) CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 15.Total Proposed Fenestration Area: Enter the sum of the existing (D04a) and proposed fenestration areas for all orientations (E07 + E08). For project scopes: Add Fenestration/Glazing less than or equal to 75 square feet (ft2) and/or Add Fenestration/Glazing less than or equal to 16 ft2, enter NA. 16.Maximum Allowed Fenestration Area: Enter the maximum allowed fenestration area for all orientations, from D02. 17.Is the Total Proposed Fenestration Area less than or equal to the Maximum Allowed Fenestration Area: Indicate Yes if the Total Proposed Fenestration Area is less than or equal to the Maximum Allowed Fenestration Area. If No, the project fails prescriptive compliance – specified fenestration areas must be reduced, or compliance may be attempted using the performance approach . NOTE: If Total Proposed Fenestration Area equals NA, Design Complies - Indicate Yes. 18.Total Proposed West-Facing Fenestration Area: Enter the sum of the existing (D04b) and proposed west-facing fenestration areas (E08). For project scopes: Add Fenestration/Glazing less than or equal to 75 square feet (ft2) and/or Add Fenestration/Glazing less than or equal to 16 ft2, enter NA. 19.Maximum Allowed West-Facing Fenestration Area: Enter the maximum allowed west -facing fenestration area only, from D03. 20.Is the Total Proposed Fenestration Area less than or equal to the Maximum Allowed West-Facing Fenestration Area: Indicate Yes if the Total Proposed West-Facing Fenestration Area is less than or equal to the Maximum Allowed West -Facing Fenestration Area. If No, the project fails prescriptive compliance – specified west-facing fenestration areas must be reduced, or compliance may be attempted using the performance approach. NOTE: If Total Proposed West-Facing Fenestration Area equals NA, Design Complies - Indicate Yes. 21.Proposed Fenestration U-factor (Windows): If necessary, report the area-weighted average U-factor from the completed CF1R-ENV-02. Otherwise, report the single largest associated value from column E09. 22.Required Fenestration U-factor (Windows): Enter the Maximum Allowed U-factor (D05a). 23.Is the Proposed Fenestration U-factor less than or equal to the Required Fenestration U-factor: Indicate Yes if the Proposed Fenestration U- factor is less than or equal to the Required Fenestration U -factor. If No, the project fails prescriptive compliance – specified fenestration U- factor must be reduced, or compliance may be attempted using the performance approach. 24.Proposed Fenestration SHGC (Windows): If necessary, report the area-weighted average SHGC from the completed CF1R-ENV-02. Otherwise, report the single largest associated value from column E11 or E14. 25.Required Fenestration SHGC (Windows): Enter the Maximum Allowed solar heat gain coefficient (SHGC) (D06a). 26.Is the Proposed Fenestration SHGC less than or equal to the Required Fenestration SHGC: Indicate Yes if the Proposed Fenestration SHGC is less than or equal to the Required Fenestration SHGC. If No, the project fails prescriptive compliance – specified fenestration SHGC must be reduced, or compliance may be attempted using the performance approach. CERTIFICATE OF COMPLIANCE – USER INSTRUCTIONS CF1R-ALT-05-E Prescriptive Residential Alterations That Do Not Require HERS Field Verification (Page 9 of 13) CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 27. Proposed Fenestration U-factor (Skylights): If necessary, report the area-weighted average U-factor from the completed CF1R-ENV-02. Otherwise, report the single largest associated value from column E09. 28. Required Fenestration U-factor (Skylights): Enter the Maximum Allowed U-factor (D05b). 29. Is the Proposed Fenestration U-factor less than or equal to the Required Fenestration U-factor: Indicate Yes if the Proposed Fenestration U- factor is less than or equal to the Required Fenestration U-factor. If No, the project fails prescriptive compliance – specified fenestration U- factor must be reduced, or compliance may be attempted using the performance approach . 30. Proposed Fenestration SHGC (Skylights): If necessary, report the area-weighted average solar heat gain coefficient (SHGC) from the completed CF1R-ENV-02. Otherwise, report the single largest associated value from column E11 or E14. 31. Required Fenestration SHGC (Skylights): Enter the Maximum Allowed solar heat gain coefficient (SHGC) (D06b). 32. Is the Proposed Fenestration SHGC less than or equal to the Required Fenestration SHGC: Indicate Yes if the Proposed Fenestration solar heat gain coefficient (SHGC) is less than or equal to the Required Fenestration SHGC. If No, the project fails prescriptive compliance – specified fenestration SHGC must be reduced, or compliance may be attempted using the performance approach. F. Fenestration/Glazing Proposed Areas and Efficiencies – Replace (Section 150.2(b)1B) 1. Tag/ID: A label (if any) from the plans, such as W1. 2. Fenestration Type: Indicate the type of fenestration construction (e.g., Fixed Window, Operable Window, or Skylight). NOTE: Doors with glazing are counted in one of two ways. A door with 25 percent or more glazing is considered a glazed door and is counted as the entire door area. A door with less than 25 percent glazing can be counted as the entire door area or can be calculated as the actual glass area with a 2-inch (0.17 ft2) frame all around. 3. Frame Type: Metal, metal thermal break, or nonmetal. 4. Dynamic Glazing: Indicate if the fenestration has integrated shading device, chromogenic glazing or none for no dynamic Gla zing. NOTE: Chromogenic glazing shall be considered separately from other fenestration types. 5. Orientation (North, East, South, West): The definitions in the Energy Standards include these specific details - • North is oriented to within 45 degrees of true north, including 45 degrees east of north; • East is oriented to within 45 degrees of true east, including 45 degrees south of east; • South is oriented to within 45 degrees of true south, including 45 degrees west of south; • West is oriented to within 45 degrees of true west, including 45 degrees north of west. NOTE: Skylights in a roof pitch greater than 1:12 can be included as facing the same orientation as that portion of the roof angle. If the skylight is in a roof with a pitch less than 1:12, the skylight is assumed to face west. CERTIFICATE OF COMPLIANCE – USER INSTRUCTIONS CF1R-ALT-05-E Prescriptive Residential Alterations That Do Not Require HERS Field Verification (Page 10 of 13) CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 6. Area Removed (ft2): Enter the area, in square feet (ft2), of the fenestration/glazing being removed. 7. Area Added (ft2): Enter the area, in square feet (ft2), of the fenestration/glazing being added. 8. Net Added Area (ft2): The difference between the Area Added and the Area Removed. 9. Proposed U-factor: Enter (a) the National Fenestration Rating Council (NFRC) U-factor based on the proposed brand and type of fenestration using NFRC certified values, (b) the default value from Table 110.6-A, (c) Equation NA6-1, or (d) the area-weighted average U- factor calculated on form CF1R-ENV-02-E, Area-Weighted Average Calculation Worksheet. For the exceptions, up to 3 square feet (ft2) of tubular skylights and up to 3 ft2 of glazing in a door enter N/A, and for up to 16 ft2 of skylight, enter 0.55. If any products (other than the exceptions) have a higher U -factor than 0.30, first complete an ENV-02 to calculate a weighted average U-factor and attach it to this CF1R. NOTE: Dynamic glazing is a glazing system that changes its performance U-factor and solar heat gain coefficient (SHGC) based on the physical environment. Dynamic glazing includes chromogenic glazing or integrated shading systems (this does not include internally or externally mounted shading devices). If using dynamic glazing, use the lowest tested U -factor and SHGC in Columns 9 and 11. 10. Proposed U-factor Source: National Fenestration Rating Council (NFRC), Table 110.6-A, Equations NA6-1, or Area-Weighted Average Worksheet (ENV-02). The source of the U-factor data for the fenestration product. 11. Proposed SHGC: In climate zones 2, 4, 6-15 enter the solar heat gain coefficient (SHGC) from (a) National Fenestration Rating Council (NFRC), (b) default value from Table 110.6-B, (c) Equation NA6-2, or (d) the weighted average SHGC calculated on form CF1R-ENV-02. For the exceptions – up to 3 square feet (ft2) of tubular skylights and up to 3ft2 of glazing in a door, enter N/A; up to 16ft2 of skylight, enter 0.30. If any products (other than the exceptions) have a higher SHGC than required by Table 150.1-A or Table 150.1-B, first complete a form CF1R-ENV-02 to calculate the area-weighted average SHGC and attach it to this CF1R. 12. Proposed SHGC Source: National Fenestration Rating Council (NFRC), Table 110.6-B, Equations NA6-2, or Area-Weighted Average Worksheet (ENV-02). The source of the solar heat gain coefficient (SHGC) data for the fenestration product. 13. Exterior Shading Device: If exterior shading devices are used to meet the solar heat gain coefficient (SHGC) requirement, indicate the type of device (from Table S-1 of CF1R-ENV-03 Solar Heat Gain Coefficient Worksheet) and attach an ENV-03. NOTES: (1)An exterior shading device is not used for products with a National Fenestration Rating Council (NFRC) rated U-factor and solar heat gain coefficient (SHGC); based on a factory integrated shading device. CERTIFICATE OF COMPLIANCE – USER INSTRUCTIONS CF1R-ALT-05-E Prescriptive Residential Alterations That Do Not Require HERS Field Verification (Page 11 of 13) CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 (2)If using an overhang for south-facing glazing, the glazing must be fully shaded at solar noon on August 21 and substantially exposed to direct sunlight at solar noon on December 21 (see Residential Manual, Section 3.5.5). 14.Combined SHGC from CF1R-ENV-03: If exterior shading devices are combined with the solar heat gain coefficient (SHGC) value of the fenestration to meet the prescriptive SHGC requirements (as indicated by a value in column F. 13), indicate the SHGC calculat ed on form CF- 1R-ENV-03 and attach the form for each window with an exterior shading device. To determine compliance with allowable fenestration areas, complete rows 15-30. 15.Net Added West-facing Fenestration Area: If limited, enter the total amount of west-facing fenestration ONLY that will be added to the dwelling unit when alterations are complete. 16.Is Net Added Fenestration Area less than or equal to 0 for west-facing fenestration? Indicate Yes or No. If No, the project fails prescriptive compliance – specified west-facing fenestration areas must be reduced, or compliance may be attempted using the performance approach. 17.Net Added Fenestration Area (all orientations): This field is to show the net area of added fenestration for all orientations . 18.Is Net Added Fenestration Area less than or equal to 0 for all orientations? Indicate Yes or No. If No, the project fails prescriptive compliance –specified fenestration areas must be reduced, or compliance may be attempted using the performance approach. 19.Proposed Fenestration U-factor (Windows): If necessary, enter the area-weighted average U-factor from the completed CF1R-ENV-02. Otherwise, report the single largest associated value from F09. 20.Required Fenestration U-factor (Windows): From Section D., report the value of column 05a. 21.Is the Proposed Fenestration U-factor less than or equal to the Required Fenestration U-factor? Indicate Yes or No. If No, the project fails prescriptive compliance – specified fenestration U-factor must be reduced, or compliance may be attempted using the performance approach. 22.Proposed Fenestration SHGC (Windows): If necessary, enter the area-weighted average solar heat gain coefficient (SHGC) from the complete CF1R-ENV-02. Otherwise, report the single largest associated value from columns F11 or F14. 23.Required Fenestration SHGC (Windows): From Section D., report the value of column 06a. 24.Is the Proposed Fenestration SHGC less than or equal to the Required Fenestration SHGC? Indicate Yes or No. If No, the project fails prescriptive compliance – specified fenestration SHGC must be reduced, or compliance ma y be attempted using the performance approach. 25.Proposed Fenestration U-factor (Skylights): If necessary, enter the area-weighted average U-factor from the completed CF1R-ENV-02. Otherwise, report the single largest associated value from F09. 26.Required Fenestration U-factor (Skylights): From Section D., report the value of column 05b. 27.Is the Proposed Fenestration U-factor less than or equal to the Required Fenestration U-factor? Indicate Yes or No. If No, the project fails prescriptive compliance – specified fenestration U-factors must be reduced, or compliance may be attempted using the performance approach. CERTIFICATE OF COMPLIANCE – USER INSTRUCTIONS CF1R-ALT-05-E Prescriptive Residential Alterations That Do Not Require HERS Field Verification (Page 12 of 13) CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 28.Proposed Fenestration SHGC (Skylights): If necessary, enter the area-weighted average solar heat gain coefficient (SHGC) from the completed CF1R-ENV-02. Otherwise, report the single largest associated value from columns F11 or F14. 29.Required Fenestration SHGC (Skylights): From Section D., report the value of column 06b. 30.Is the Proposed Fenestration SHGC less than or equal to the Required Fenestration SHGC? Indicate Yes or No. If No, the project fails prescriptive compliance – specified fenestration SHGC must be reduced, or compliance may be attempted using the performance approach. G.Space Conditioning (SC) Systems – Heating/Cooling Requirements of the Standards apply to a heating and cooling system alteration based on the type of alteration and the system type (Section 150.2(b)1). A completely new system will meet all mandatory and prescriptive requirements, which vary by climate zon e (based on Section 150.2(b)1C). When parts of a system are replaced, it may trigger some of the same requirements that apply to new systems and duct alterati ons. A Certificate of Compliance for Alterations to Space Conditioning Systems (CF1R-ALT-02) is required for each dwelling unit with a space conditioning system alteration. 1.Space Conditioning (SC) System Identification or Name: Name of the space conditioning (SC) system or any other identifying name. 2.Space Conditioning (SC) System Location or Area Served: Zone, or area, served by the space conditioning (SC) system. 3.Exemption from HERS Verification: Section 150.2(b)1E a.Space Conditioning (SC) System was not altered. b.Duct systems with less than 25 linear feet in unconditioned spaces as determined by visual inspection. c.Existing duct systems constructed, insulated or sealed with asbestos d.Duct systems that have been documented to have been previously sealed as confirmed through field verification and diagnostic testing in accordance with procedures in the Reference Appendices, Residential Appendix, RA3.1. CERTIFICATE OF COMPLIANCE – USER INSTRUCTIONS CF1R-ALT-05-E Prescriptive Residential Alterations That Do Not Require HERS Field Verification (Page 13 of 13) CA Building Energy Efficiency Standards - 2022 Residential Compliance January 2022 H.Water Heating Systems Water heating compliance for an alteration is described in Section 150.2(b)1H. Options: 1.Is natural gas connected to the existing water heater? Yes or No. 2.Water Heating System Identification or Name: Name of the Water Heating System or any other identifying name. 3.System Option (from §150.2(b)1Hiii): Indicate the prescriptive option: 1, 2, 3, or 4. 4.Water Heating System Type: Domestic Hot Water (DHW), Hydronic, or Combined Hydronic. DHW is for domestic hot water, hydronic is a water heating system used for space heating only; combined hydronic is when the water heater will provide both space conditioning and domestic hot water. 5.Water Heater Type: Consumer Instantaneous, Consumer Storage, Heat pump water heater, NEEA Tier 3 heat pump water heater 6.Volume: Indicate the volume of the storage tank. For consumer instantaneous, enter ‘n/a’. 7.Fuel Type: Natural Gas, Propane, Heat Pump, Electricity. 8.Number of Water Heaters in System: Enter the total number of water heaters for each system. Documentation Declaration Statements 1.The person who prepared the CF1R will sign and complete the fields for their name, company (if applicable), address, phone nu mber, certification information (if applicable), date and signature. 2.The person who is assuming responsibility for the project being built to comply with Title 24, Part 6, will complete the fiel ds for their name, company (if applicable), address, phone number, license number (if applicable), date and signature. 1.Gas or propane water heating system; or 2.A single heat pump water heater. The storage tank shall not be located outdoors and shall be placed on an incompressible, rig id insulated surface with a minimum thermal resistance of R-10. The water heater shall be installed with a communication interface that meets either the requirements of Section 110.12(a) or has a ANSI/CTA-2045-B communication port; or 3.A single heat pump water heater that meets the requirements of NEEA Advanced Water Heater Specification Tier 3 or higher; or 4.If no natural gas is connected to the existing water heater location, a consumer electric water heater