SA2023-1014BUILDING PERMIT
DESIGN & DEVELOPMENT
DEPARTMENT
78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
PHONE (760) 777-7125
WWW.LAQUINTACA.GOV
APPLIED DATE: 12/11/2023
ISSUED DATE: 07/11/2024
Permit Type:
Permit Number:
Property Address:
APN:
Legal Description
Property Zoning:
Valuation:
Sign
78730 HIGHWAY 111
SA2023-1014
643220024
Parcel 4 PM 202/98 PM 30147
$5,000.00
Owner:
Applicant:Jessica Ortega
5765 Northview Pl., Riverside, CA 92506
Contractor:ANN MACDONALD / 643004
1384 E FIFTH ST, ONTARIO, CA 91764
Declaration / Acknowledgement
PRIOR TO THE ISSUANCE OF THIS PERMIT FOR CONSTRUCTION, ALTERATION, IMPROVEMENT, DEMOLITION, OR REPAIR THE OWNER, APPLICANT AND/OR
CONTRACTOR UNDER PENALTY OF PERJURY HAVE AFFIRMED WHEN APPLICABLE, THROUGH THE SUBMITTAL OF FORMS OR BY OTHER ELECTRONIC MEANS, THE
FOLLOWING:
LICENSED CONTRACTOR OR OWNER-BUILDER DECLARATION (1 or 2)
1) They are licensed under provisions of Chapter 9 (commencing with
Section 7000) of Division 3 of the Business and Professions Code, and the
referenced
License is in full force and effect, or;
2) That they are exempt from the Contractors’ State License Law for the
reason(s) indicated by either (2)(a) and/or (2)(b), or (2)(c) where he or
she is exempt from licensure by a valid exemption. [Section 7031.5,
Business and Professions Code: Any city or county that requires a permit
to construct, alter, improve, demolish, or repair any structure, prior to its
issuance, also requires the applicant for the permit to file a signed
statement that he or she is licensed pursuant to the provisions of the
Contractors’ State License Law (Chapter (commencing with Section 7000)
of Division 3 of the Business and Professions
Code] Any violation of Section 7031.5 by any applicant for a permit
subjects the
applicant to a civil penalty of not more than five hundred dollars ($500).)
a) As owner of the property, or my employees with wages as their sole
compensation, will do all of or portions of the work, and the structure is
not intended or offered for sale (Section 7044, Business and Professions
Code: The Contractors’ State License Law does not apply to an owner of
property who, through employees’ or personal effort, builds or improves
the property, provided that the improvements are not intended or offered
for sale. If, however, the building or improvement is sold within one year of
completion, the Owner-Builder will have the burden of proving that it was
not built or improved for the purpose of sale.).
b) As owner of the property, will be exclusively contracting with licensed
c) Are exempt from licensure under the Contractors’ State License Law.
As an Owner-Builder, they acknowledge that, except for their personal
residence in which they must have resided in for at least one year prior to
completion of the improvements covered by this permit, they cannot legally
sell a structure built as an owner-builder if it has not been constructed in
its entirety by licensed contractors. It is understood that a copy of the
applicable law, Section 7044 of the Business and Professions Code, is
available upon request when this application was submitted at the
following Web site:
http://www.leginfo.ca.gov/calaw.html.
DECLARATION REGARDING CONSTRUCTION LENDING AGENCY (If
applicable)
A construction lender will be used for completion of the improvements
covered by this permit and the name and information of which is on file for
public inspection during the regular business hours of the public entity.
Failure of the applicant to indicate the construction lender on the
application does not relieve that person of the requirement to give the
construction lender preliminary notice from that duty.
WORKERS’ COMPENSATION DECLARATION (1, 2 or 3)
WARNING: FAILURE TO SECURE WORKERS’ COMPENSATION COVERAGE IS
UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND
CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000), IN ADDITION
TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION
3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY’S FEES.
1) Has and will maintain a certificate of consent to self-insure for workers’
compensation, issued by the Director of Industrial Relations as provided for
by Section 3700 of the Labor Code, for the performance of the work for
which this permit is issued.
2) Has and will maintain workers’ compensation insurance, as required by
Section 3700 of the Labor Code, for the performance of the work for which
this permit is issued.
3) Certifies that, in the performance of the work for which this permit is
issued, shall not employ any person in any manner so as to become subject
to the workers’ compensation laws of California, and agree that, if should
become subject to the workers’ compensation provisions of Section 3700 of
the Labor Code, shall forthwith comply with those provisions.
NOTICE TO APPLICANT (1, 2 and 3)
1) Each person upon whose behalf this application was made, each person
at whose request and for whose benefit work is being performed under or
pursuant to any permit issued as a result of this application, the owner, and
the applicant, each agrees to, and shall defend, indemnify and hold harmless
the City of La Quinta, its officers, agents, and employees for any act or
omission related to the work being performed under or following issuance of
this permit.
2) Any permit issued as a result of this application becomes null and void if
work is not commenced within 360 days from date of issuance of such
permit, or if cessation of work for 180 days will subject permit to
cancellation. On or after January 1, 2019, every permit issued shall become
invalid unless the work on the site authorized by such permit is commenced
within 12 months after its issuance, or if the work authorized on the site by
such permit is suspended or abandoned for a period of 12 months after the
time the work is commenced.
3) Certified that they read the application and state that the information
provided is correct. Agree to comply with all city and county ordinances and
state laws relating to building construction, and hereby authorize
representatives of this city to enter upon the above-mentioned property for
inspection purposes.
IMPORTANT: An Application for Permit was made to the Building Official,
subject to the conditions and restrictions set forth at the time of application,
which is now hereby an Issued Permit. If any part of the information being
supplied on this permit is inaccurate or untrue, please contact the City of La
Quinta at (760) 777-7125 immediately for correction.
Printed: 5/16/25 10:03 am Page 1 of 3
Permit Type:
Permit Number:
Property Address:
Sign
SA2023-1014
78730 HIGHWAY 111
BUILDING PERMIT
Install 1 wall sign and 1 under canopy sign
Use of Permit
Construction Details
Sign Text Sign Materials Location on premises
0Sign Height (ft)0Sign Width (ft)0Sign Length (ft)
NoSign Illuminated?Number of Wall /
Awning Signs w/
Electrical
I UnderstandDo you Understand?
0Acres Parcel 4 PM 202/98 PM
30147
Legal Description
Valuation Details
Type Group Sq Ft Value
Financial Information
Fee AmountFee Amount PaidInvoice No.
INV-00007872 $10.62 Credit Card Convenience Fee $10.62
$12.00 Digital Archiving and Records Management Fee - OTC $12.00
$404.00 Sign Permit $404.00
$8.00 Technology Enhancement Fee $8.00
$1.00 Building Standards Administration $1.00
$435.62 $435.62 Total for Invoice INV-00007872
Grand Total for Permit $435.62 $435.62
Workflow / Inspections
Workflow Step / Action Name Action Type Start Date End Date
Review v.1 12/12/2023 0:00 07/11/2024 8:50
Sign Review v.1 Receive Submittal 12/12/2023 0:00 12/15/2023 16:56
Sign Review v.2 Receive Submittal 07/08/2024 0:00 07/11/2024 8:50
Issue Permit v.1 07/11/2024 8:53 07/11/2024 13:58
Verify Contractor info & Conditions have been met v.1 Generic Action 07/11/2024 8:53
Verify & Invoice Fees v.1 Generic Action 07/11/2024 8:53
Verify Fee Payment & Issue Permit v.1 Generic Action 07/11/2024 13:58
Print, Attach, and Email Building Permit v.1 Create Report 07/11/2024 13:57 07/11/2024 13:58
Inspections v.1
Framing v.1 Inspection
Rough Electrical v.1 Inspection
Underground Electrical v.1 Inspection
Footing v.1 Inspection
Final Inspections v.1 08/15/2024 0:00 08/20/2024 8:34
Final Sign v.1 Inspection 08/15/2024 0:00 08/19/2024 14:08
Final Sign v.2 Inspection 08/20/2024 8:34 08/20/2024 8:34
Printed: 5/16/25 10:03 am Page 2 of 3
Permit Type:
Permit Number:
Property Address:
Sign
SA2023-1014
78730 HIGHWAY 111
BUILDING PERMIT
Construction or work for which a permit is required shall be subject to inspection by the building official and such construction or work
shall remain visible and able to be accessed for inspection purposes until approved. Approval as a result of an inspection shall not be
construed to be an approval of a violation of the provisions of the applicable code and other ordinances of the jurisdiction. Inspections
presuming to give authority to violate or cancel the provisions of the applicable code and other ordinances of the jurisdiction shall not be
valid. It shall be the duty of the owner or the owner's authorized agent to cause the work to remain visible and able to be accessed for
inspection purposes. Neither the building official nor the jurisdiction shall be liable for expense entailed in the removal or replacement of
any material required to allow inspection.
It shall be the duty of the holder of the building permit or their duly authorized agent to notify the building official when work is ready for
inspection. It shall be the duty of the permit holder to provide access to and means for inspections of such work that are required by this
code.
Inspections
A building or structure shall not be used or occupied in whole or in part, and a change of occupancy of a building or structure or portion
thereof shall not be made, until the building official has issued a certificate of occupancy therefor as provided herein. Issuance of a
certificate of occupancy shall not be construed as an approval of a violation of the provisions of the applicable code and other ordinances
of the jurisdiction. Certificates presuming to give authority to violate or cancel the provisions of this code or other ordinances of the
jurisdiction shall not be valid.
Certificate of Occupancy
A person shall not make connections from a utility, a source of energy, fuel, or power, or a water system or sewer system to any building
or system that is regulated by the applicable code and other ordinances of the jurisdiction for which a permit is required, until approved by
the building official.
Service Utilities
Printed: 5/16/25 10:03 am Page 3 of 3
Generated Date/Time:Documentation Software: Energy Code Ace
CA Building Energy Efficiency Standards - 2022 Nonresidential Compliance Report Version: 2022.0.000
Schema Version: rev 20220101
Compliance ID: 164147-1223-0002
Report Generated: 2023-12-11 16:12:47
STATE OF CALIFORNIA
Sign Lighting CALIFORNIA ENERGY COMMISSION
CERTIFICATE OF COMPLIANCE NRCC-LTS-E
This document is used to demonstrate compliance with requirements in 110.9, 110.12, 130.0/ 160.5, 130.3/ 160.5(d), 140.8/ 170.2(e) and 141.0(b)2M/ 180.2(b)4Bvi for sign lighting
scopes using the prescriptive path. Exit signs and traffic signs are not required to comply with prescriptive requirements per exceptions to 140.8/ 170.2(e) and do not need to complete
this compliance document.
Project Name: Five Below, La Quinta, 78730 Hwy 111 Report Page: (Page 1 of 4)
Project Address: Date Prepared: 2023-12-11T19:12:45-05:00
A. GENERAL INFORMATION
01 Project Location (city)La Quinta
02 Climate Zone 15
03 Occupancy Types within Project Healthcare Facility
Multifamily/ MF Mixed-use >= 4 stories (includes dormitory, senior living)
B. PROJECT SCOPE
This table includes illuminated signs that are within the scope of the permit application and are demonstrating compliance using the prescriptive path outlined in 140.8/ 170.2(e) or
141.0(b)2M/ 180.2(b)4Bvi for alterations. Exit signs and traffic signs are not required to comply with prescriptive requirements per exceptions to 140.8/ 170.2(e) and do not need to
complete this compliance document.
01 02 03 04 05
Name or Item Tag Complete Sign Description Sign Status1 Sign Type Compliance Method2
1 Five Below signs New Outdoor Alternate Light Sources
1FOOTNOTE: Sign alterations that increase the connected lighting load, replace and rewire more that 50% of the ballasts, or relocate the sign to a different location must comply with 140.8/ 170.2(e). See
141.0(b)2M/ 180.2(b)4Bvi for more details.
2The ENERGY VERIFIED Label compliance method is only applicable if the sign has a permanent, factory-installed, ENERGY VERIFIED label certified by UL or comparable, confirming the sign complies with
140.8/ 170.2(e). Note that using an ENERGY VERIFIED label is an optional compliance path, not a mandatory requirement. See the tooltips for this table for more details.
STATE OF CALIFORNIA
Sign Lighting CALIFORNIA ENERGY COMMISSION
CERTIFICATE OF COMPLIANCE NRCC-LTS-E
Project Name: Five Below, La Quinta, 78730 Hwy 111 Report Page: (Page 2 of 4)
Date Prepared: 2023-12-11T19:12:45-05:00
Generated Date/Time:Documentation Software: Energy Code Ace
CA Building Energy Efficiency Standards - 2022 Nonresidential Compliance Report Version: 2022.0.000
Schema Version: rev 20220101
Compliance ID: 164147-1223-0002
Report Generated: 2023-12-11 16:12:47
C. COMPLIANCE RESULTS
Results in this table are automatically calculated from data input and calculations in Tables B through H. Note: If any cell on this table says "COMPLIES with Exceptional Conditions" refer
to Table D. Exceptional Conditions for guidance or see applicable Table referenced below.
01 02 03
≥
04
OR
05
OR
06 07
Name or Item
Tag
(See Table B)
Complete Sign Description
(See Table B)
Total Allowed (Watts)
(See Table F)
Total Designed
(Watts)
(See Table F)
Compliant Light
Sources
(See Table G)
ENERGY VERIFIED
Label
(See Table H)
Compliance Results
1 Five Below signs ≥OR YES OR COMPLIES
Controls Compliance (See Table F/G/H for Details)COMPLIES
D. EXCEPTIONAL CONDITIONS
This table is auto-filled with uneditable comments because of selections made or data entered in tables throughout the form.
E. ADDITIONAL REMARKS
This table includes remarks made by the permit applicant to the Authority Having Jurisdiction.
F. MAXIMUM ALLOWED LIGHTING POWER AND CONTROLS
This section does not apply to this project.
STATE OF CALIFORNIA
Sign Lighting CALIFORNIA ENERGY COMMISSION
CERTIFICATE OF COMPLIANCE NRCC-LTS-E
Project Name: Five Below, La Quinta, 78730 Hwy 111 Report Page: (Page 3 of 4)
Date Prepared: 2023-12-11T19:12:45-05:00
Generated Date/Time:Documentation Software: Energy Code Ace
CA Building Energy Efficiency Standards - 2022 Nonresidential Compliance Report Version: 2022.0.000
Schema Version: rev 20220101
Compliance ID: 164147-1223-0002
Report Generated: 2023-12-11 16:12:47
G. LIGHT SOURCES AND CONTROLS
This table includes illuminated signs using the Alternate Lighting Sources compliance method per 140.8(b)/ 170.2(e) as indicated on Table B of this compliance document. It also
demonstrates compliance with mandatory controls requirements from 130.3 / 160.5(d) by indicating control types for each sign.
01 02 03 04 05
Name or Item Tag Complete Sign Description Compliant Light Sources1,2
Mandatory Controls Field Inspector
Shut-Off Dimming Demand
Response3 Pass Fail
1 Five Below signs LED + pwr supply 80%+ eff.
Automatic Time
Switch +
Photocontrol
(outdoor)
Power reduced
65%+
* NOTES: Controls with a * require a note in the space below explaining how compliance is achieved. EX: Sign within tunnel illuminated day and night; EXCEPTION to 130.3(a)2A.
1FOOTNOTE: Dropdown choices have been abbreviated, please refer to 140.8(b) / 170.2(e) to confirm compliance with the specific light source technologies listed.
2 Authority having jurisdiction may ask for cutsheets to confirm compliance of light source.
3 Demand response controls are only required for an Electronic Message Center having a new connected lighting power load greater than 15 kW per 110.12(d).
I. DECLARATION OF REQUIRED CERTIFICATES OF INSTALLATION
Selections have been made based on information provided in this document. If any selection have been changed by permit applicant, an explanation should be included in Table E.
Additional Remarks. These documents must be provided to the building inspector during construction and can be found online
Form/Title
NRCI-LTS-E - Must be submitted for all buildings
J. DECLARATION OF REQUIRED CERTIFICATES OF ACCEPTANCE
There are no forms required for this project.
STATE OF CALIFORNIA
Sign Lighting CALIFORNIA ENERGY COMMISSION
CERTIFICATE OF COMPLIANCE NRCC-LTS-E
Project Name: Five Below, La Quinta, 78730 Hwy 111 TApygd SlnA-6SlnA 9 yO 9F
Project Address:Date Prepared:2023-12-11T19:12:45-05:00
Generated Date/Time:Documentation Software: Energy Code Ace
CA Building Energy Efficiency Standards - 2022 Nonresidential Compliance Report Version: 2022.0.000
Schema Version: rev 20220101
Compliance ID: 164147-1223-0002
Report Generated: 2023-12-11 16:12:47
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
I certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
JessicaOrtega
Documentation Author Signature:
Company:
Permit Secured
Signature Date:
Address:CEA/ HERS Certification Identification (if applicable):
City/State/Zip:Phone:
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1.The information provided on this Certificate of Compliance is true and correct.
2.I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design identified on this Certificate of Compliance (responsible designer)
3.The energy features and performance specifications, materials, components, and manufactured devices for the building design or system design identified on this Certificate of Compliance conform to the requirements
of Title 24, Part 1 and Part 6 of the California Code of Regulations.
4.The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents, worksheets, calculations,
plans and specifications submitted to the enforcement agency for approval with this building permit application.
5.I will ensure that a completed signed copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the building, and made available to the enforcement agency for all applicable
inspections. I understand that a completed signed copy of this Certificate of Compliance is required to be included with the documentation the builder provides to the building owner at occupancy.
Responsible Designer Name:
Jessica Ortega
Responsible Designer Signature:
Company:
Permit Secured
Date Signed:
Address:License:
City/State/Zip:Phone:
page 1
s i g n & l i g h t i n g
DOL RH
Vx1104092 R1
04/28/23
10/17/23
This design and engineering is
submitted as our proposal, and
the right to use or exhibit in any
form, is not authorized without
written permission by Vixxo.
Designer
Design #
Original Date
Revision Date
78730 CA-111
La Quinta
CA, 92253
Stacie Hicks
Address
City
State
Account Representative:
All electrical scope to be completed in a U.L. approved
method and shall meet current N.E.C. standards
The purchaser agrees to hold the seller harmless against
any cause for action for damages which may occur as a
result of drilling for piers and foundations, including but not
limited to sewer, gas lines or any underground obstacles
which the purchaser or others may deem valuable.
Revision Notes
R1. Updated elevation
SITE
SIGN
1
Square Feet 5
Sign Type
Sign Size
Under Canopy Sign
12”x60”
SIGN
2
SIGN
1
SIGN
2
Square Feet 133.5
Sign Type
Sign Size
Channel Letters
48” FB with 14 1/2” hs.cp
page 2
s i g n & l i g h t i n g
97’- 7” STOREFRONT LEASE WIDTH
F RO N T PA R T I A L E L E VAT I O N
Facade:
LL to engineer and build up outer parapert height to match adjacent tenant,
build up center facade to be 3’-0” higher
LL to engineer new storefront glass, 10’- 6” high, 4’-0” min panel width, no upper mullions
LL to locate 8’ tall storefront doors per tenant’s final plans
LL to install walkway lighting, 6’-0” min O.C., with additional door light
LL to install decorative sconces per Five Below plans
LL to install HILTI eyebolts in facade for temporary banners, see A40 for loc.
LL to procure and install fabric awnings, Sunbrella Royal Blue 12” proj. low profi le
LL to provide curb cut within 30’ of storefront entry
LL to provide unobstructed permanent access to sign mountable
electrical connection area
LL to provide electrical to center of all applicable sign mountable areas
Signage:
-Primary Sign: 48” internally illuminated channel letters with 14
1/2” internally illuminate tagline
-Temp Post and Panel: Construction sign placed near entrance
-Walkway sign: 5’-0” x 1’-0” UC Sign
-Pylon Panel: LL to provide tenant with a sign panel on the
common pylon sign. If a panel is not available, tenant has the
right to take an open panel when available.
scale 3/32”=1’
Finishes by LL:
- Facade: 3” Dryvit 456 Oyster Shell
- Sign Field: 1” Dryvit FIBE-101021S
(to match Pantone 285)
- Frame EIFS: 4“ wide Dryvit 310 China White
- Cornice EIFS: 1“ Dryvit 310 China White
- Pilasters: 2” Dryvit 113 Amarillo White
S IG N
1
Square Feet 5
Sign Type
Sign Size
Under Canopy Sign
12”x60”
S I GN
2
S I G N
2
4'-0"
17'-0"
1'-2 1/2"
5'-7 7/8"5'-7 7/8"5'-7 7/8"
28'-3 1/4"
30'-3 1/4"
7'
-
7
7
/
8
"
Square Feet 133.5
Sign Type
Sign Size
Channel Letters
48” FB with 14 1/2” hs.cp
40'-0” MIN
DOL RH
Vx1104092 R1
04/28/23
10/17/23
This design and engineering is
submitted as our proposal, and
the right to use or exhibit in any
form, is not authorized without
written permission by Vixxo.
Designer
Design #
Original Date
Revision Date
78730 CA-111
La Quinta
CA, 92253
Stacie Hicks
Address
City
State
Account Representative:
All electrical scope to be completed in a U.L. approved
method and shall meet current N.E.C. standards
The purchaser agrees to hold the seller harmless against
any cause for action for damages which may occur as a
result of drilling for piers and foundations, including but not
limited to sewer, gas lines or any underground obstacles
which the purchaser or others may deem valuable.
Revision Notes
R1. Updated elevation
PLANNING APPROVAL
ADMINISTRATIVE
CASE # ____________________
EXHIBIT # ____________________
INITIAL :
DATE :
SA2023-1014
sfernandez
07/11/2024 8:57:35AM
page 3
s i g n & l i g h t i n g
DOL RH
Vx1104092 R1
04/28/23
10/17/23
This design and engineering is
submitted as our proposal, and
the right to use or exhibit in any
form, is not authorized without
written permission by Vixxo.
Designer
Design #
Original Date
Revision Date
78730 CA-111
La Quinta
CA, 92253
Stacie Hicks
Address
City
State
Account Representative:
All electrical scope to be completed in a U.L. approved
method and shall meet current N.E.C. standards
The purchaser agrees to hold the seller harmless against
any cause for action for damages which may occur as a
result of drilling for piers and foundations, including but not
limited to sewer, gas lines or any underground obstacles
which the purchaser or others may deem valuable.
Revision Notes
R1. Updated elevation
F RO N T F U LL E L E VAT I O N
page 4
s i g n & l i g h t i n g
DOL RH
Vx1104092 R1
04/28/23
10/17/23
This design and engineering is
submitted as our proposal, and
the right to use or exhibit in any
form, is not authorized without
written permission by Vixxo.
Designer
Design #
Original Date
Revision Date
78730 CA-111
La Quinta
CA, 92253
Stacie Hicks
Address
City
State
Account Representative:
All electrical scope to be completed in a U.L. approved
method and shall meet current N.E.C. standards
The purchaser agrees to hold the seller harmless against
any cause for action for damages which may occur as a
result of drilling for piers and foundations, including but not
limited to sewer, gas lines or any underground obstacles
which the purchaser or others may deem valuable.
Revision Notes
R1. Updated elevation
S I G N
1
Channel Letter Set - FB+Tagline
28’-3 1/4”
4’-0”
17’-0”
1’-2 1/2”
5 3/8”
5’-7 7/8”
1. FACES: .177” Thick Acrylic
2. RETURNS: 040" Aluminum Returns Stapled To Backs
3. TRIM CAP: 1” Wide w/#8 x 1/2" Lg Pan Head Screws
Painted To Match. Trim Cap Chem Bonded To Faces.
3a. TRIM CAP CLIPS: (Letters 54" & Over) Brake Formed
.040" x 2” Wide Alum Clips Painted To Match Trim Cap.
Attach w/ #8 X 1/2" Long Pan Head Screws. Clips To
Be Installed At All Trim Cap Screws. Max 18" On Center
4. BACKS: 3MM Routed ACM Stapled To Returns. Seal w/
VOC Compliant White Latex Caulk
5. DRAIN HOLES: 1/4ӯ With Light Cover. (2) Per Letter.
No Drain Holes For Interior Letters
6. LEDS: Principal True White Qwik Mod 2 Modules
10. ENCLOSURE: Paige Box Or Approved Equal
11. PRIMARY: 1/2” Conduit To Disconnect Switch Secure
To Wall w/Straps By Others
7. WIRE: Secondary Low Voltage Led Wire
8. PASS THRU: Paige Wallbuster Or Approved Equal.
12. SERVICE SWITCH: Located On Side Of Enclosure
9. POWER SUPPLY: Principal 60 Watt 12VDC Class 2
Power Supply Inside Enclosure.
Specifications Side Section View Mounting
Electrical:
5"2
8
6
4
14
5
13
3
1
15
PF1
PF3
PF2
11
9
10
12
7
2
1
3
3a
TRIM CAP CLIP DETAIL
LETTERS 54” AND OVER
e. Mounting Hardware By Sign Installer Unless Otherwise
Noted.
c. All Visible Wiring & Conduit To Be Run In Straight Lines &
90° Bends.
b. Final Primary Hook-up By Sign Installer Where Allowed By
Local Codes.
Installation Notes:
a. Sufcient Primary Dedicated Circuit Within 5' Of Center Of
Sign By Others.
d. Seal All Building Penetrations.
13. RIV-NUTS: 1/4-20. Minimum (3) Per Individual Letter
14. HARDWARE: Minimum 1/4"Ø Non-corrosive Hardware.
Minimum (3) Per Individual Letter
Threaded Rod Will Be Provided Standard (1ft Per Mounting
Point). Pipe Spacers Provided Standard. All Other Hardware
Is to Be Provided By Installer As Required.
Colors & Finishes:
Interior Of All Letters To Be Finished White
PF3. TRIM CAP: To Match Returns
PF1. FACE: #7328 White
PF2. RETURNS: Pre-nished Silver Metallic
PF4. BACKS: Pre-nished White
15. Existing wall type - TBD
Scale nts
Est. Weight 250 Square Feet 133.5
Sign Type
Sign Size
Channel Letters
48” FB with 14 1/2” hs.cp
Total amps: 2.2
(2) 60 Watt 12VDC Class 2
Principal Tr ue White Qwik Mod 2 Modules
(1) 20A-120V
(1) 20A-120V
Electrical Requirements
page 5
s i g n & l i g h t i n g
DOL RH
Vx1104092 R1
04/28/23
10/17/23
This design and engineering is
submitted as our proposal, and
the right to use or exhibit in any
form, is not authorized without
written permission by Vixxo.
Designer
Design #
Original Date
Revision Date
78730 CA-111
La Quinta
CA, 92253
Stacie Hicks
Address
City
State
Account Representative:
All electrical scope to be completed in a U.L. approved
method and shall meet current N.E.C. standards
The purchaser agrees to hold the seller harmless against
any cause for action for damages which may occur as a
result of drilling for piers and foundations, including but not
limited to sewer, gas lines or any underground obstacles
which the purchaser or others may deem valuable.
Revision Notes
R1. Updated elevation
SI G N
2
3'-0"
1'
-
0
"
TBD
8'
-
6
"
M
I
N
T
Y
P
(V
I
F
)
(A
B
S
O
L
UT
E
M
I
N
7
'
-
6
"
)
5'-0"
EQ EQ
1"
4"
COLORS & FINISHES
P1. PANEL & MOUNTING BRACKETS: Satin White
V1. GRAPHICS: 1st Sur face Arlon 2500-67 Translucent
Bright Blue
SIGN CONSTRUCTION
8. SLEEPER: 1/8" X 1-1/2" X 1-1/2" Angle Spanning
Minimum (2) Str uctural Members
3a. HOLES: 7/16"Ø For 3/8"Ø Hardware
5. TUBE: 1/8" x 1-1/2" x 1-1/2" x 4-3/4" Long Aluminum
Painted P1
7. HARDWARE: 3/8"Ø Non-corrosive Hardware Painted
P1. (2) Per Plate
2. PLATE: 1/4" X 1" X 4" Aluminum Flat Bar Painted P1
1. PANEL: Fabricated Aluminum Painted P1. Faces To Be
.090" Aluminum VHB Taped To 3/4" x 3/4" x 1/2"
Aluminum Tube Frame. 1/4"Ø Riv Nuts In Top Of Tube
Frame For Mounting
3. PLATE: 1/4" X 2" X 4" Aluminum Flat Bar Painted P1
6. HARDWARE: 1/4"Ø Painted P1
4. TUBE: 1/8" x 1" x 1" Aluminum Painted P1
INSTALLATION HARDWARE
SIGN SPECIFICATIONS
1
2 5
6
4
6
3
P1
P1 P1
P1
P1
P1
P1
V1
EST W EI G H T: 25 lbs
7
8
9
1
2
4
P1
P1
P1
1'
-
0
"
1"
P17
0'
-
5
"
5
3
3a
4"
2"
2-
3
/
4
"
EQ
EQ EQ
EQ
1/4”
Under Canopy Sign FB-FB12-UC - Non-illuminated
SCA L E: 1" = 1' 0"
Specifica ons Side Section View Mounting Bracket
TBD