The URL can be used to link to this page

SA2019-0007DESIGN & DEVELOPMENT DEPARTMENT 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 Permit Type: Permit Number: Property Address APN: Legal Description Property Zoning: Valuation: Sign SA2019-0007 78772 HIGHWAY 111 643080037 $0.00 BUILDING PERMIT eca Qa�&a CALIFORNIA Owner: Applicant: Contractor: PHONE (760) 777-7125 WWW.LAQUINTACA.GOV APPLIED DATE: 02/12/2019 ISSUED DATE: ONE ELEVEN LA QUINTA 46753 ADAMS STREET, LA QUINTA, CA 92253 Jeff Grady 41945 BOARDWALK SUITE L, PALM DESERT, CA 92211 PRIOR TO THE ISSUANCE OF THIS PERMIT FOR CONSTRUCTION, ALTERATION, IMPROVEMENT, DEMOLITION, OR REPAIR THE OWNER, APPLICANT AND/OR CONTRACTOR UNDER PENALTY OF PERJURY HAVE AFFIRMED WHEN APPLICABLE, THROUGH THE SUBMITTAL OF FORMS OR BY OTHER ELECTRONIC MEANS, THE FOLLOWING: LICENSED CONTRACTOR OR OWNER -BUILDER DECLARATION (1 or 2) 1) They are licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, and the referenced License is in full force and effect, or; 2) That they are exempt from the Contractors' State License Law for the reason(s) indicated by either (2)(a) and/or (2)(b), or (2)(c) where he or she is exempt from licensure by a valid exemption. [Section 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractors' State License Law (Chapter (commencing with Section 7000) of Division 3 of the Business and Professions Code] Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).) a) As owner of the property, or my employees with wages as their sole compensation, will do all of or portions of the work, and the structure is not intended or offered for sale (Section 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who, through employees' or personal effort, builds or improves the property, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the Owner -Builder will have the burden of proving that it was not built or improved for the purpose of sale.). b) As owner of the property, will be exclusively contracting with licensed c) Are exempt from licensure under the Contractors' State License Law. As an Owner -Builder, they acknowledge that, except for their personal residence in which they must have resided in for at least one year prior to completion of the improvements covered by this permit, they cannot legally sell a structure built as an owner -builder if it has not been constructed in its entirety by licensed contractors. It is understood that a copy of the applicable law, Section 7044 of the Business and Professions Code, is available upon request when this application was submitted at the following Web site: http://www.leginfo.ca.gov/calaw.html. DECLARATION REGARDING CONSTRUCTION LENDING AGENCY (If applicable) A construction lender will be used for completion of the improvements covered by this permit and the name and information of which is on file for public inspection during the regular business hours of the public entity. Failure of the applicant to indicate the construction lender on the application does not relieve that person of the requirement to give the construction lender preliminary notice from that duty. WORKERS' COMPENSATION DECLARATION (1, 2 or 3) WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000), IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. 1) Has and will maintain a certificate of consent to self -insure for workers' compensation, issued by the Director of Industrial Relations as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 2) Has and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 3) Certifies that, in the performance of the work for which this permit is issued, shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if should become subject to the workers' compensation provisions of Section 3700 of the Labor Code, shall forthwith comply with those provisions. NOTICE TO APPLICANT (1, 2 and 3) 1) Each person upon whose behalf this application was made, each person at whose request and for whose benefit work is being performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and employees for any act or omission related to the work being performed under or following issuance of this permit. 2) Any permit issued as a result of this application becomes null and void if work is not commenced within 360 days from date of issuance of such permit, or if cessation of work for 180 days will subject permit to cancellation. On or after January 1, 2019, every permit issued shall become invalid unless the work on the site authorized by such permit is commenced within 12 months after its issuance, or if the work authorized on the site by such permit is suspended or abandoned for a period of 12 months after the time the work is commenced. 3) Certified that they read the application and state that the information provided is correct. Agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above -mentioned property for inspection purposes. IMPORTANT: An Application for Permit was made to the Building Official, subject to the conditions and restrictions set forth at the time of application, which is now hereby an Issued Permit. If any part of the information being supplied on this permit is inaccurate or untrue, please contact the City of La Quinta at (760) 777-7125 immediately for correction. Printed: 5/16/25 11:40 am Page 1 of 3 BUILDING PERMIT Permit Type: Sign Permit Number: Property Address SA2019-0007 78772 HIGHWAY 111 TUSCANO'S PIZZA & BREW QUINTA / SIGN PERMIT Location on premises Sign Illuminated? No Type Group Sq Ft Value Invoice No. Fee Fee Amount Amount Paid PERMIT-SA2019-0007 RECORDS MANAGEMENT FEE $10.00 $10.00 PL - SIGN PERMIT $263.00 $263.00 TECHNOLOGY ENHANCEMENT FEE $5.00 $5.00 Total for Invoice PERMIT-SA2019-0007 $278.00 $278.00 Grand Total for Permit $278.00 $278.00 Workflow Step / Action Name Action Type Start Date End Date meview V. i --------- ------------------------------ Sign Review v. Receive Submittal Issue Permit v.1 ------------------------------------------------------------- Verify Contractor info & Conditions have been met v.1 --------------------------------------------------------------------------- Generic Action ------------------------------------------------------------- Verify & Invoice Fees v.1 --------------------------------------------------------------------------- Generic Action ------------------------------------------------------------- Verify Fee Payment & Issue Permit v.1 --------------------------------------------------------------------------- Generic Action ------------------------------------------------- Print, Attach, and Email Building Permit v.1 Create Report Inspections v.1 ........................................................................................................................................ Building Site v.1 Inspection ---------------------------------------- Footing v.1 Inspection Final Inspections v.1 ---------------------------------------------------------------------------------------------------------------------------------------- Final Building v.1 Inspection Construction or work for which a permit is required shall be subject to inspection by the building official and such construction or work shall remain visible and able to be accessed for inspection purposes until approved. Approval as a result of an inspection shall not be construed to be an approval of a violation of the provisions of the applicable code and other ordinances of the jurisdiction. Inspections presuming to give authority to violate or cancel the provisions of the applicable code and other ordinances of the jurisdiction shall not be valid. It shall be the duty of the owner or the owner's authorized agent to cause the work to remain visible and able to be accessed for inspection purposes. Neither the building official nor the jurisdiction shall be liable for expense entailed in the removal or replacement of any material required to allow inspection. It shall be the duty of the holder of the building permit or their duly authorized agent to notify the building official when work is ready for inspection. It shall be the duty of the permit holder to provide access to and means for inspections of such work that are required by this code. Printed: 5/16/25 11:40 am Page 2 of 3 BUILDING PERMIT Permit Type: Sign Permit Number: SA2019-0007 Property Address: 78772 HIGHWAY 111 A building or structure shall not be used or occupied in whole or in part, and a change of occupancy of a building or structure or portion thereof shall not be made, until the building official has issued a certificate of occupancy therefor as provided herein. Issuance of a certificate of occupancy shall not be construed as an approval of a violation of the provisions of the applicable code and other ordinances of the jurisdiction. Certificates presuming to give authority to violate or cancel the provisions of this code or other ordinances of the iurisdiction shall not be valid. A person shall not make connections from a utility, a source of energy, fuel, or power, or a water system or sewer system to any building or system that is regulated by the applicable code and other ordinances of the jurisdiction for which a permit is required, until approved by the buildina official. Printed: 5/16/25 11:40 am Page 3 of 3 Description: TUSCANO'S PIZZA & BREW QUINTA / SIGN PERMIT Type: SIGN PERMIT PLANNING Subtype: STANDARD Status: APPROVED Applied: 2/12/2019 JLIM Approved: 2/14/2019 CFL Parcel No: 643080037 Site Address: 78772 HIGHWAY 111 LA QUINTA,CA 92253 Subdivision: PM 25865 Block: Lot: 13 Issued: Lot Sq Ft: 0 Building Sq Ft: 0 Zoning: Finaled: Valuation: $0.00 Occupancy Type: Construction Type: Expired: No. Buildings: 0 No. Stories: 0 No. Unites: 0 Details: Applied to Approved ADDITIONAL CHRONOLOGY NAME TYPE NAME ADDRESSI CITY STATE ZIP PHONE FAX EMAIL APPLICANT PD GROUP DBA SIGNARAMA - WILLIAM SIGARDSEN 41945 BOARDWALK PALM DESERT CA SUITE L 92211 glenn@pdsignarama.co m OWNER ONE ELEVEN LA QUINTA 46753 ADAMS STREET LA QUINTA CA 92253 •' • CLTD DESCRIPTION ACCOUNT CITY AMOUNT PAID PAID DATE RECEIPT # CHECK # METHOD PAID BY BY ONE ELEVEN LA PL - SIGN PERMIT 101-0000-42434 0 $263.00 $263.00 2/12/19 R44765 7479 CHECK JLIM QUINTA t777 Total Paid for PL - SIGN PERMIT: $263.00 $263.00 Printed: Wednesday, April 22, 2020 2:14:31 PM 1 of 2 _.:#?wSYSiEMS ■ CLTD DESCRIPTION ACCOUNT CITY AMOUNT PAID PAID DATE RECEIPT # CHECK # METHOD PAID BY BY RECORDS 101-0000-42416 0 $10.00 $10.00 2/12/19 R44765 7479 CHECK ONE ELEVEN LA JLIM MANAGEMENT FEE QUINTA Total Paid for RECORDS MANAGEMENT FEE: $10.00 $10.00 TECHNOLOGY 502-0000-43611 0 $5.00 $5.00 2/12/19 R44765 7479 CHECK ONE ELEVEN LA JLIM ENHANCEMENT FEE QUINTA Total Paid for TECHNOLOGY ENHANCEMENT FEE: $5.00 $5.00 INSPECTIONS diiiiiE�� REVIEWS REVIEW TYPE REVIEWER SENT DATE DUE DATE RETURNED STATUS REMARKS NOTES DATE 1ST PLANNING (1 CARLOS 2/12/2019 2/19/2019 2/14/2019 READY FOR APPROVAL WK) FLORES Attachment Type CREATED OWNER BOND INFORMATION ATTACHMENTS DESCRIPTION PATHNAME SUBDIR ETRAKIT ENABLED DOC 2/14/2019 CARLOS FLORES APPROVED PLANS APPROVED PLANS.pdf 0 DOC 2/12/2019 JACK LIMA APPLICATION APPLICATION.pdf 0 DOC 2/12/2019 JACK LIMA PLANS PLANS.pdf 0 DOC 2/12/2019 JACK LIMA CF-111 CF-1R.pdf 0 Printed: Wednesday, April 22, 2020 2:14:31 PM 2 of 2 __ _.:ff-- WYSiEMS City of La Quinta 78-495 Calle Tampico La Quinta, California 92253 PHONE:760.777.7125 FAX:760.777.1233 Office. p .>` �;R;1 •'K` y,':,. Case Number Accepted Assigned 30-Day By To Deadline SAZOII-Ooo NA Notes: SIGN PERMIT APPLICATION - PERMANENT SIGNS - D Q 0 FEB 12 2019 CITY OF LA QUINTA 0 1GN & DEVELOPMENT DEPARTMENT - L� FEB 18 2019 r�lnn: Sections A and B are to be completed by the applicant in their entirety and shall be accompanied by a site plan and any other applicable information listed in Section C unless specifically waived by the appropriate City staff member and noted thereon. No applications will be accepted by mail or fax SECTION A - SIGN INFORMATION Type of sign: .Y� Permanent wall sign(s) ❑ Permanent freestanding/monument sign(s) ❑ Other _ Name of business: � '(' ' :I r� � � , � (� f � �2 r' ' , � �✓� Site address/ / location: -797`i ,-' Sign program Information regarding if a City approved sign (Application #): program is applicable to the proposed location is available at the Planning Department. Sign location: A%4.7% So Kok C�.S I: 14wr !7—k Sign text: -P/ 2!�_ A / L',>n/L- l� Dimensions: Sign width: Sign height: Structure width: (f0 f Structure height: Single or double sided S, �c (�. Total square feet of sign area: Sign Permit Application - Permanent Page 1 of 2 City of La Quinta • Planning Department • 760.777.7125 08.30.10 P:\Application Submittal Form s\AppIications\SA\SA-P Application - 08.30.10.doc i SECTION B - APPLICANT/OWNER INFORMATION Applicant Certification I certify that I have read this application packet in its entirety and have read and understand the City's sign regulations (LQMC 9.160) along with any City approved property specific sign program applicable to the proposed location. I further certify that each application item submitted is consistent with the requirements listed in the following Section C and all proposed temporary and permanent improvements included in this application are proposed in compliance with all applicable regulations. i understand and agree that if during the processing of the application, it is determined the information submitted does not strictly meet such standards or contains errors or omissions, clarification and/or supplemental information may be required which will delay the processing of this applicatio .� Applicant's Signature: Date: Print Name: r.�. S - IA20�t_ Property Owner Certification I certify under the penalty of the laws of the State of California that I am the property owner of the property that is the subject matter of this application and I am authorizing and hereby do consent to the filing of this application and acknowledge that the final approval by the City of La Quinta, if any, may result in restrictions, limitations and construction obligations being imposed on this real pro erty. 1 Owner/Authorized Agent Signature*: Date: � Print Name(s): 1_. A � v vY15 *An authorized agent for the owner must attach a notarized letter of authorization from the legal property owner. SECTION C - APPLICATION SUBMITTAL REQUIREMENTS ` APPLICATION SUBMITTAL REQUIREMENTS TO BE COMPLETED BY CITY STAFF -a Each .of the following items is required for submittal FDF unless a waiver is granted by City Staff. All plans shall # of format Waiver `° be legible, accurately scaled, representatively colored paper (on CD- OK'd by .o with identified dimensions and presented on 8'i"x1l" or copies ROM) (initials) N 11 x17 sheets ❑ ❑ Filing Fees Receipt ($100) 1 NA ❑ NA Application 1 NA NA ❑ NA Site Plan (showing location of each proposed and existing sign to 5 NA NA remain) ❑ NA Building Elevations (showing location of each sign on entire side 5 NA NA of building as proposed) Sign Construction Detail (identifying size, colors, construction 5 p NA materials, and lighting components for each varying portion of the NA NA sign) Sign Permit Application - Permanent Page 2 of 2 City of La Quinta - Planning Department - 760.777.7125 08.30.10 P:\Application Submittal Form s%Applications\SA\SA-P Application - 08.30.10.doc STATE OF CALIFORNIA SIGN LIGHTING C_EC-NRCC-LTS-01-E(Rev4sed 08/16) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE AIDrr i Tc ni A. General Information Project Address: j .7 -7 Z_ 14 ou I � � e t Location of Sign Outdoor Signs Indoor Signs Phase of Sign Construction ❑ New Signs ❑ Sign Alterations Type of Lighting Control ❑ New t ighting Controls ❑ Replaced Lighting Controls ❑ Not Installing Lighting Controls This Certificate of Compliance includes the following components (check all that apply): ❑ Mandatory Measures (Lighting Controls) .Maximum Allowed Lighting Power ❑ Specific Lighting Sources 1. Mandatory Sign Lighting Controls NOTES: 1. The some responsible person may install both the sign lighting power and the sign lighting controls, or a different responsible person may install the sign lighting controls than the responsible person installing the sign lighting power. 2. The Mandatory Measures (sign lighting controls) are required for compliance with the sign lighting Standards. If the person responsible for installing the sign lighting power is not also responsible for the sign lighting controls, then the owner of the sign, general contractor, or architect shall be responsible to have the sign lighting controls installed. 3. If more thal1 one person has responsibility for compliance, each responsible person shall prepare and sign a Certificate of Compliance and an Installation Certificate applicable to the portion of construction for which they are responsible; alternatively, the person with chief responsibility for construction shall prepare and sign the Certificate of Compliance Declaration Statement for the entire construction (e.g. a C-10 contractor may complete parts la and 1b on one compliance document and a C-45 contractor may complete parts 2a and 2b on a separate compliance document — the Responsible Designer shall submit the two compliance documents together for the some complete installation). I have responsibility for installing the sign lighting controls:' ❑ Yes, I have responsibility for the sign lighting controls, and will ' �No, I do not have responsibility for installing the sign lighting controls. complete parts la and lb of this compliance document Someone else will complete parts la and lb of this compliance document. 1a. Check Yes or No for all of the following statements: 1 There are existing sign lighting controls that comply with the applicable provisions of §110.9 and §130.3 ❑ Yes ❑ No There are no existing sign lighting controls and I will be installing sign lighting controls that comply with the applicable 2 provisions of §110.9 and §130.3 ❑ Yes ❑ No There are existing sign lighting controls that do not comply with the applicable provisions of §110.9 and §130.3 and I will be 3 installing sign lighting controls that comply with the applicable provisions of §110.9 and §130.3 ❑ Yes ❑ No CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance August 2016 STATE OF CALIFORNIA SIGN LIGHTING CEC-NRCC-LTS-01-E(Revised 08/16) CERTIFICATE OF COMPLIANCE Sign Lighting P rojeM Name' / � NIA WitPrepared: ' // / I N RCC-LTS-01-E (Page 2 of 5) io. Manaatory Sign Lighting Controls - — - — - - If the person signing the Certificate of Compliance Declaration Statement on this NRCC-LTS-01-E is responsible for complying with the sign lighting control requirements, that person shall answer all of the following questions: If there are construction documents, indicate where on the building plans the mandatory measures (sign lighting control) note block can be located: 1 §130.3(a)1. All indoor sign lighting is controlled with an automatic time -switch control or astronomical time- Y N NA switch control. §130.3(a)2A. All outdoor sign lighting is controlled with a photocontrol in addition to an automatic time- O O O 2 switch control, or an astronomical time -switch control. O O O EXCEPTION to Section 130.3(a)2A: Outdoor signs in tunnels, and signs in large permanently covered outdoor Y NA areas that are intended to be continuously lit, 24 hours per day and 365 days per year. O O §130.3(a)2B. All outdoor sign lighting that is ON both day and night is controlled with a dimmer that provides the ability to automatically reduce sign lighting power by a minimum of 65% during nighttime hours. Signs that Y N NA 3 are illuminated at night and for more than 1 hour during daylight hours shall be considered ON both day and 1010 O night. EXCEPTION to Section 130.3(a)2B: Outdoor signs in tunnels and large covered areas that are intended to be illuminated both day and night. Y NA 9130.3(a)3. Demand Responsive Electronic Message Center Control. An Electronic Message Center (EMC) O O having a new connected lighting power load greater than 15 kW has a control installed that is capable of Y N N/A 4 reducing the lighting power by a minimum of 30% when receiving a demand response signal. O O O EXCEPTION to Section 130.3(a)3: Lighting for EMCs that is not permitted by a health or life safety statute, ordinance, or regulation to be reduced by 30%. Y NA Field Inspector Notes: O O CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance August 2016 STATE OF CALIFORNIA SIGN LIGHTING CEC-NRCC-LTS-01-E(Revised OB/16) CERTIFICATE OF COMPLIANCE Sign Lighting AMISS[ IN N RCC-LTS-01 E (Page 3 of 5) 2. Mandatory Sign Lighting Measures ' I have responsibility for installing the sign lighting — - — Yes, I have responsibility for the sign lighting, and will complete ❑ No, I do not have responsibility for installing the sign lighting. Someone parts 2a and 2b of this compliance document else will complete parts 2a and 2b of this compliance document. 2a. Maximum Allowed Lighting Power Method of Compliance Certificate of Compliance and Field Inspection Energy Checklist. Complete this part if there are signs using the maximum allowed lighting power method of compliance. (Complete part 2b of this Certificate of Compliance if there are signs using the Specific Lighting Sources method of compliance). A B C D E F G H I J OPTIONAL - Symbol or Energy Verified Field Code Description of the Sign Label (see Allotted Watts Design Complies Inspector instructions Watts Y/N Check that below) Sign Complies 1. U a��y J \ H _tea, eC_n Ln 0 vl a 'a `E N 3N`^ N O " C 0 F+ pCp in X C w— II II Q =- Lu O Q ��,, 0 O- E O U S/� ❑ l'?i g' e� ❑ ❑ o ❑ ❑ 0 ❑ ❑ 0 ❑ ❑ o ❑ ❑ ELI❑ ❑ 1 0 ❑ A Symbol or code used on the plans (when plans are required) and other documents. B A description of the sign, or location of sign on the building; and the location of sign on construction documents. OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory -installed, ENERGY VERIFIED label, confirming that the sign complies with the Section 140.8 of the California 2016 Title 24, Part 6 Standards, using the Maximum Allowed Lighting Power method of compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks C authorized by Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National Standards Institute In accordance with ISO/IEC 17011. Surveillance by the Accredited Certification Body shall be an ongoing annual Inspection program carried out by a Type A Inspection body In accordance with ISO/IEC 17020. For signs with such an ENERGY VERIFIED label, columns 'D'through 'I' are not required to be filled out. Note: Using an ENERGY VERIFIED label Is an optional method to validate compliance. An ENERGY VERIFIED label is not needed for compliance. D The sign area in square feet. E List "I" if the sign is internally illuminated. List "E" if the sign is externally illuminated. F Allowed watts per square foot. Enter 12 if the sign is listed as "I" in column E. Enter 2.3 if sign is listed as "E" in column E. G Multiply the square footage in column D times the allowed Lighting Power Density (LPD = watts) in column F. H Show the total installed watts in the sign, as determined according to the applicable provisions of §130(c). I Enter Y if the number in column H is less than orequal to the number in column G. Otherwise, the sign does not comply. J This page doubles as a field inspection checklist. Field Inspector Notes: CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance August 2016, STATE OF CALIFORNIA SIGN LIGHTING CEC-NRCC-LTS-01-E(Revised 08/16) CERTIFICATE OF COMPLIANCE Sign Lighting Vrp)nct NZ— _ COMMISSION Date Nepu d: 2-// )_ / Ice N RCC-LTS-01-E (Page 4 of 5) 211b. Specific Lighting Source Method of Compliance Certificate of Compliance and Field Inspection Energy Checklist Complete this part if there are signs using the Specific Lighting Source method of compliance. (Complete part 2 of this Certificate of Compliance if there are signs using the maximum allowed lighting power method of compliance) A g C D E OPTIONAL Symbol ENERGY VERIFIED Specific light source used for compliance Field Inspector or Description label Shall include only lighting Check that Sign Code (see technologies listed below Complies instructions (List all that apply) below) El El ' t: , ' ❑ ❑ ❑ A Symbol or code used on the plans (when plans are required) and other documents. B A narrative description of the sign, or location of sign on the building; and the location of sign on construction documents OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory -installed ENERGY VERIFIED label, confirming that this sign complies with the Section 140.8 of the California 2016 Title 24, Part 6 Standards, using the Specific Lighting Source Method of Compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized by Underwriters Laboratories C (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National Standards Institute In accordance with ISO/IEC 17011 Surveillance by the Accredited Certification Body shall be an ongoing annual inspection program carried out by a Type A Inspection body in accordance with ISO/IEC 17020. For signs with such an ENERGY VERIFIED label, column 'D' is not required to be filled out. Note: Using an ENERGY VERIFIED label Is an optional method to validate compliance. An ENERGY VERIFIED label Is not needed for compliance. Specific Light Source Compliance Method. The sign(s) identified above use only the following lighting technologies; List all applicable numbers (1 through 9) that apply in column D above for each row. 1 High pressure sodium lamps Metal halide lamps that are pulse start or ceramic served by a ballast that has a minimum efficiency of 88% or greater. 2 Ballast efficiency is the measured output wattage to the lamp divided by the measured operating Input wattage when tested according to ANSI C82.6-2005. Metal halide lamps that are pulse start that are 320 watts or smaller, are not 250 watt or 175 watt lamps, and are 3 served by a ballast that has a minimum efficiency of 80%. Ballast efficiency is the measured output wattage to the lamp divided by the measured operating input wattage when tested according to ANSI C82.6-2005. D Neon or cold cathode lamps with transformer or power supply efficiency greater than or equal to a minimum efficiency of 7S% when 4 the transformer or power supply rated output current is less than 50 mA. The ratio of the output wattage to the input wattage is at 100% tubing load. Neon or cold cathode lamps with transformer or power supply efficiency greater than or equal to a minimum efficiency of 68% when 5 the transformer or power supply rated output current is 50 mA or greater. The ratio of the output wattage to the input wattage is at 100% tubing load. 6 Fluorescent lighting systems meeting one of the following requirements: A.) Use only lamps with a minimum color rendering index (CRI) of 80; or B.) Use only electronic ballasts with a fundamental output frequency not less than 20 kHz. 7 Light emitting diodes (LEDs) with a power supply having an efficiency of 80% or greater. Single voltage external power supplies that are designed to convert 120 volt AC input into lower voltage DC or AC output, and have a 8 nameplate output power less than or equal to 250 watts, shall comply with the applicable requirements of the Appliance Efficiency Regulations (Title 20). 9 Compact fluorescent lamps that do not contain a medium screw base sockets (E24/E26). This page doubles as a field inspection checklist. E I Field Inspector Notes: CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance August 2016 STATE OF CALIFORNIA SIGN LIGHTING CEC- NRCC-LTS-01-E Revised 08115 CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE NRCC-LTS-01-E Sign Lighting (Page 5 of 5) PrnJcet Name: �e /+ 0 5 uatePieParea:�y�y� f r DOCUMENTATION AUTHOR'S DECLARATION STATEMENT 1. I certify that this Certificate of Compliance documentation is accurate and complete. Documentation Author Name: Jeff Grady Documentation Author Signature: � �• " Company: Signarama Signature Date: 2/7/18 Address: 41945 Boardwalk Suite L CEA Certification Identification (if applicable): City/State/Zip: Palm Desert, CA 92211 Phone: 760-776-9907 RESPONSIBLE PERSON'S DECLARATION STATEMENT I certify the following under penalty of perjury, under the laws of the State of California. 1. The information provided on this Certificate of Compliance is true and correct. 2. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design identified on this Certificate of Compliance (responsible designer). 3. The energy features and performance specifications, materials, components, and manufactured devices for the building design or system design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of Regulations. 4, The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application. 5. 1 will ensure that a completed signed copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the building, and made available to the enforcement agency for all applicable inspections. I understand that a completed signed copy of this Certificate of Compliap5e is required to be included with the documentation the builder provides t the building owner at occupancy. Responsible Designer Name: Responsible Designer Signature: Company: Signarama Date Signed: 2/7/18 Address: 41945 Boardwalk Suite L License 830131 City/state/zip: palm Desert, CA 92211 PhO1e 760-776-9907 CA Building Energy Efficiency Standards - 2013 Nonresidential Compliance August 2015 New face 47" Replacing word F1L " _J , L ` L= -14%:J Sig arama- The way to grow your business. 41945 BOARDWALK, SUITE L PALM DESERT, CA 92211 PH 760.776.9907 / FX 760.776.9844 NORTH ELEVATION Existing E-1 a Frontage: _100_ Linear Feet Total Signage S.F Contractor's Lic # 830131 C45, C61/1342 Workers Comp. #1938807 City Liic. #97005491 Internally Illuminated Acrylic Faced Channel Letters Depth: 5" Aluminum Thickness:.040 Acrylic Thickness: 1/8" Face Color: White 4 color process Return Color: Black Trim Cap Color: Black Mounting: Back Standoff: Flush L.E.D. Color: White PLANNING APPROVAL ADMINISTRATIVE CASE# SA2019-0007 EXHIBIT# INITIAL cflores DATE 02/14/2019 5:19:47 PM 76-772 Customer: Tuscano's Pizza Brewerly Address: 78-772 Hwy 111 La Quinta, CA 92253 Dwg. No.: 94698 Date: 2-7-19 Designer: GA Salesperson: BS FEB 18 2019 Telephone:909-215-7351 Jobsite: Fax:760-xxx-)o= Same NorthELEVATION Rev.. 1 CHANNEL LETTER & LIGHT BOX SECTION 5" .040 ALUMINUM INTERNALLY ILLUMINATED LED, RETURNS I WALL , TRIMCAP ACRYLIC FACES HOUSE POWER- / L.E.D. MODULE VL LOW VOLTAGE WIRE DISCONNECT WIRE NUTS SWITCH EACH LETTER FASTENED BY A MINIMUM OF 4 #10 SCREWS WITH STUCCO APPROVED ANCHORS 12VOLT L. E. D. DRIVER � #8 SHEET METAL SCREW ALL WALL KNETRAIIONS TO BE SEALED WITH UL LISTED SILICONE SEALANT U.L. 48 NEC ELECTRICAL CODE 2016 THIS SIGN IS INTENDED TO BE INSTALLED IN ACCORDANCE WITH REQUIREMENTS OF ARTICLE 600 ON THE NATIONAL ELECTRIC CODE AND OR OTHER APPLICABLE LOCAL CODES. THIS INCLUDES PROPER GROUNDING AND BONDING OF THE SIGN.THE LOCATION OF THE DISCONNECT SWITCH AFTER INSTALLATION SHALL COMPLY WITH ARTICLE 600.6(A)(1) OF THE NATIONAL ELECTRICAL CODE. CHANNEL LETTER CONNECTION DETAIL 12VOLT L.E.D. DISCONNECT SWITCH DRIVER r� L MOUNTING STUCTURE HOUSi POWER laTE—WMl IT!+B� 1Lc!�� l la l U. L. LISTED AND LABELED COMPLIES WITH 2O16 CA ELECTRIC CODE, ARTICLE 600_ YOUR SIGNATURE ACKNOWLEDGES FULL APPROVAL OF DESIGN CONTENT AND LAYOUT, RELEASING SIGN*A*RAMA FROM RESPONSIBILITY IN REGARD TO INCORRECT DESIGN AND INFORMATION. THE COLORS SHOWN ARE ONLY REPRESENTATIVE OFACTUAL PMS COLOR CALL OUTS. FINAL COLOR WILL BE MATCHED AS CLOSE AS POSSIBLE, COMMENSURATE WITH MATERIALS USED. THIS DESIGN /S PROPRIETARY PROPERTYAND MAY NOT BE USED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SIGN*A*RAMA. New face 28" Replacing word Li Ar Sianarama- qW The way to grow your business. 41945 BOARDWALK, SUITE L PALM DESERT, CA 92211 PH 760.776.9907 / FX 760.776.9844 EAST ELEVATION Frontage: _90_ Linear Feet Total Signage S.F Contractor's Lic # 830131 C45, C61ID42 Workers Comp. # 1938807 City L'Ic. #97005491 Internally Illuminated Acrylic Faced Channel Letters Depth: 5" Aluminum Thickness:.040 Acrylic Thickness: 1/8" Face Color: White 4 color process Return Color: Black Trim Cap Color: Black Mounting: Back Standoff: Flush L.E.D. Color: White PLANNING APPROVAL ADMINISTRATIVE CASE# SA2019-0007 EXHIBIT# INITIAL cflores DATE 02/14/2019 5:19:47 PM Customer: Tuscano's Pizza Brewerly Address: 78-772 Hwy I I I La Quinta, CA 92253 Dwg. No.: 94698 Date: 2-7-19 Designer: GA Salesperson: BS Telephone:909-215-7351 Jobsite: Fax:7gp-xxx-xxia Same East ELEVATION Rev.. 1 CHANNEL LETTER & LIGHT BOX SECTION 5" ALUMINUM .040 INTERNALLY ILLUMINATED LE.D. RETURNS WALL ��— TRIMCAP �— ACRYLIC FACES - HOUSE POWER-1 � L.E.D. MODULE LOW VOLTAGE WIRE DISCONNECT WIRE NUTS SWITCH EACH LETTER FASTENED BY A MINIMUM OF 4 #10 SCREWS WITH STUCCO APPROVED 12VOLT L,E.D, ANCHORS DRIVER #8 SHEET METAL SCREW ALL WALL PENETRATIONS TO BE SEALED WITH UL LISTED SILICONE SEALANT U.L. 48 NEC ELECTRICAL CODE 2016 THIS SIGN 15INTENDED TO BE INSTALLED IN ACCORDANCE WITH REQUIREMENTS OF ARTICLE 600 ON THE NATIONAL ELECTRIC CODE AND OR OTHER APPLICABLE LOCAL CODES. THIS INCLUDES PROPER GROUNDING AND BONDING OF THE SIGN. THE LOCATION OF THE DISCONNECT SWITCH AFTER INSTALLATION SHALL COMPLY WITH ARTICLE 600.6(A)(1) OF THE NATIONAL ELECTRICAL CODE. CHANNEL LETTER CONNECTION DETAIL 12VOLT L,E,D, DISCONNECT � SWITCH DRIVER 1 ! iC)' I:ii POWER MOUNTING STUCTURE U.L. LISTED AND LABELED COMPLIES WITH 2O16 CA ELECTRIC CODE, ARTICLE 600 YOUR SIGNATURE ACKNOWLEDGES FULL APPROVAL OF DESIGN CONTENT AND LAYOUT, RELEASING SIGN"A"RAMA FROM RESPONSIBILITY /N REGARD TO INCORRECT DESIGN AND INFORMATION. THE COLORS SHOWN ARE ONLY REPRESENTATIVE OFACTUAL PMS COLOR CALL OUTS. FINAL COLOR WILL BE MATCHED AS CLOSE AS POSSIBLE, COMMENSURATE WITH MATERIALS USED. THIS DESIGN IS PROPRIETARY PROPERTYAND MAY NOT BE USED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SIGN A"RAMA. A2 New face 28" Replacing word F 71 17.3" � ' . 7/1 I .1� I' L1. 1 1/1 WEST ELEVATION y-�� r, J�!jV .z �+c� t1_ 1, 1 tii Internally Illuminated Acrylic Faced Channel Letters Depth: 5" Aluminum Thickness:.040 Acrylic Thickness: 1/8" Face Color: White 4 color process Return Color: Black Trim Cap Color: Black Mounting: Back Standoff: Flush L.E.D. Color: White PLANNING APPROVAL ADMINISTRATIVE CASE# SA2019-0007 EXHIBIT# INITIAL cflores DATE 02/14/2019 5:19:47 PM CHANNEL LETTER & LIGHT BOX SECTION 5" .040 ALUMINUM INTERNALLY ILLUMINATED L.E.D. RETURNS r WALL] TRIMCAP �— ACRYLIC FACES HOUSE POWER—► L.E.D. MODULE LOW VOLTAGE WIRE DISCONNECT WIRE NUTS SWITCH CH LETTER FASTENED BYA ;TANICHORS NIMUM OF 4 #10 SCREWS H STUCCO APPROVED 12VOLT L, E. D. DRIVER 8 SHEET METAL SCREW ALL WALL PPNETRATIgNS TO BE SEALED WITH UL LISTED SILICONE SEALANT U.L. 48 NEC ELECTRICAL CODE 2016 THIS SIGN 15 INTENDED TO BE INSTALLED IN ACCORDANCE WITH REQUIREMENTS OF ARTICLE 600 ON THE NATIONAL ELECTRIC CODE AND OR OTHER APPLICABLE LOCAL CODES. THIS INCLUDES PROPER GROUNDING AND BONDING OF THE SIGN. THE LOCATION OF THE DISCONNECT SWITCH AFTER INSTALLATION SHALL COMPLY WITH ARTICLE 600.6(A)(1) OF THE NATIONAL ELECTRICAL CODE. CHANNEL LETTER CONNECTION DETAIL 12VOLT L.E.D. DISCONNECT DRIVER SWITCH FOT H(7_iSi POWER MOUNTING STUCTURE CFOV#a LOW I I C1OMEi U.L. LISTED AND LABELED COMPLIES WITH 2O16 CA ELECTRIC CODE, ARTICLE 600 Frontage: _90_ Linear Feet Total Signage S.F. Customer: Telephone: 909-215-7351 Tuscano's Pizza Brewerly Fax:760-xxx-)o= Address: 78-772 Hwy I I I La Quinta, CA 92253 West ELEVATION Jobsite: Customer val: Same and p oval: V Sigparama-Contractors e way to grow your business. 41945 BOARDWALK, SUITE L PALM DESERT, CA 92211 PH 760.776.9907 / FX 760.776.9844 Llc # 830131 C45, C61/D42 Workers Com # 1938807 p' City L'Ic. # 97005491 Dwg. No.: 94698 Rev.: 1 Date: 2-7-19 YOUR SIGNATURE ACKNOWLEDGES FULL APPROVAL OFDESIGN CONTENT AND LAYOUT, RELEASING SIGN*A*RAMA FROM RESPONS/BILITY/N REGARD TO INCORRECT DESIGN AND INFORMATION. THE COLORS SHOWN ARE ONLY REPRESENTATIVE OF ACTUAL PMS COLOR CALL OUTS. FINAL COLOR WILL BE MATCHED AS CLOSEAS POSSIBLE, COMMENSURATE WITH MATERIALS USED. THIS DESIGN IS PROPRIETARY PROPERTYAND MAY NOT BE USED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SIGN*A*RAMA. A3 Designer: GA Salesperson: BS New face 28" Replacing word FXY D D17.3n L U 1 SOUTH ELEVATION Internally Illuminated Acrylic Faced Channel Letters Depth: 5" Aluminum Thickness:.040 Acrylic Thickness: 1/8" Face Color: White 4 color process Return Color: Black Trim Cap Color: Black Mounting: Back Standoff: Flush L.E.D. Color: White PLANNING APPROVAL ADMINISTRATIVE CASE# SA2019-0007 EXHIBIT# INITIAL cflores DATE 02/14/2019 5:19:47 PM CHANNEL LETTER & LIGHT BOX SECTION 5" .040 ALUMINUM INTERNALLY ILLUMINATED L.E.D. RETURNS WALL �--� TRIMCAP ACRYLIC FACES HOUSE POWER--* L.E.D. MODULE LOW VOLTAGE WIRE DISCONNECT WIRE NUTS SWITCH E ACH CH LETTER FASTENED BY A NIMUM OF 4 #10 SCREWS H STUCCO APPROVED 12VOLT L.E.D. DRIVER 8 SHEET METAL SCREW ALL WALL NEt MRA 4 TO BE SEALED WITH UL LISTED SILICONE SEALANT U.L. 48 NEC ELECTRICAL CODE 2016 THIS SIGN IS INTENDED TO BE INSTALLED IN ACCORDANCE WITH REQUIREMENTS OF ARTICLE 600 ON THE NATIONAL ELECTRIC CODE AND OR OTHER APPLICABLE LOCAL CODES. THIS INCLUDES PROPER GROUNDING AND BONDING OF THE SIGN.THE LOCATION OF THE DISCONNECT SWITCH AFTER INSTALLATION SHALL COMPLY WITH ARTICLE 600.6(A)(1) OF THE NATIONAL ELECTRICAL CODE. CHANNEL LETTER CONNECTION DETAIL DISCONNECT 12VOLT L.E.D. SWITCH -► I—r�1� DRIVER i ��—HOUSE POWER MOUNTING STUCTURE U.L. LISTED AND LABELED COMPLIES WITH 2O16 CA ELECTRIC CODE, ARTICLE 600 Frontage: _100_ Linear Feet Customer: Telephone: 909-215-7351 Jobsite: customer oval: Tuscano's Pizza Brewerly Fax:760-xxx-xxxx Same i,. Address: 78-772 Hwy I I I L ndl p Val: Total Signage S.F. La Quinta, CA 92253 South ELEVATION SicrnaramaContractor's Llc # 830131 C45, C61/D42 DWg. No.: 94698 Rey.: 1 YOUR SIGNATURE ACKNOWLEDGES FULL APPROVAL OF DESIGN CONTENT The way to grow your business. Date: 2-7-19 AND LAYOUT, RELEASING SIGN A*RAMA FROM RESPONSIBILITY IN REGARD TO INCORRECT DESIGN AND INFORMATION. THE COLORS SHOWN ARE ONLY 41945 BOARDWALK, SUITE L Workers Com #1938807 p' REPRESENTATIVE OFACTUAL PMS COLOR CALL OUTS. FINAL COLOR WILL BE MATCHED AS CLOSEAS POSSIBLE, COMMENSURATE Designer: GA PALM DESERT, CA 92211 WITH MATERIALS USED. PH 760.776.9907 / FX 760.776.9844 City Llc. # 97005491 Salesperson: BS p THIS DESIGN IS PROPRIETARY PROPERTYAND MAY NOT BE USED WITHOUT A4 THE EXPRESSED WRITTEN CONSENT OF SIGNA`RAMA.