The URL can be used to link to this page

Home My WebLink AboutBELC2023-0021BUILDING PERMIT DESIGN & DEVELOPMENT DEPARTMENT 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 Permit Type: Electrical Permit Number: BELC2023-0021 Property Address: 47815 VIA TRIESTE APN: 643130048 Legal Description Property Zoning: Valuation: $503.10 PHONE (760) 777-7125 WWW.LAQUINTACA.GOV APPLIED DATE: 02/08/2023 ISSUED DATE: 02/14/2023 CALIFORNIA Owner: ALLEN MARK C 47815 VIA TRIESTE, LA QUINTA, CA 92253 Applicant: JAMES HEGGE 83852 Avenue 45, Indio, CA 92201 Contractor: JAMES HEGGE / 748171 83852 Avenue 45, Indio, CA 92201 PRIOR TO THE ISSUANCE OF THIS PERMIT FOR CONSTRUCTION, ALTERATION, IMPROVEMENT, DEMOLITION, OR REPAIR THE OWNER, APPLICANT AND/OR CONTRACTOR UNDER PENALTY OF PERJURY HAVE AFFIRMED WHEN APPLICABLE, THROUGH THE SUBMITTAL OF FORMS OR BY OTHER ELECTRONIC MEANS, THE FOLLOWING: LICENSED CONTRACTOR OR OWNER -BUILDER DECLARATION (1 or 2) 1) They are licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, and the referenced License is in full force and effect, or; 2) That they are exempt from the Contractors' State License Law for the reason(s) indicated by either (2)(a) and/or (2)(b), or (2)(c) where he or she is exempt from licensure by a valid exemption. [Section 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractors' State License Law (Chapter (commencing with Section 7000) of Division 3 of the Business and Professions Code] Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).) a) As owner of the property, or my employees with wages as their sole compensation, will do all of or portions of the work, and the structure is not intended or offered for sale (Section 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who, through employees' or personal effort, builds or improves the property, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the Owner -Builder will have the burden of proving that it was not built or improved for the purpose of sale.). b) As owner of the property, will be exclusively contracting with licensed c) Are exempt from licensure under the Contractors' State License Law. As an Owner -Builder, they acknowledge that, except for their personal residence in which they must have resided in for at least one year prior to completion of the improvements covered by this permit, they cannot legally sell a structure built as an owner -builder if it has not been constructed in its entirety by licensed contractors. It is understood that a copy of the applicable law, Section 7044 of the Business and Professions Code, is available upon request when this application was submitted at the following Web site: http://www.leginfo.ca.gov/calaw.html. DECLARATION REGARDING CONSTRUCTION LENDING AGENCY (If applicable) A construction lender will be used for completion of the improvements covered by this permit and the name and information of which is on file for public inspection during the regular business hours of the public entity. Failure of the applicant to indicate the construction lender on the application does not relieve that person of the requirement to give the construction lender preliminary notice from that duty. WORKERS' COMPENSATION DECLARATION (1, 2 or 3) WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000), IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. 1) Has and will maintain a certificate of consent to self -insure for workers' compensation, issued by the Director of Industrial Relations as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 2) Has and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 3) Certifies that, in the performance of the work for which this permit is issued, shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if should become subject to the workers' compensation provisions of Section 3700 of the Labor Code, shall forthwith comply with those provisions. NOTICE TO APPLICANT (1, 2 and 3) 1) Each person upon whose behalf this application was made, each person at whose request and for whose benefit work is being performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and employees for any act or omission related to the work being performed under or following issuance of this permit. 2) Any permit issued as a result of this application becomes null and void if work is not commenced within 360 days from date of issuance of such permit, or if cessation of work for 180 days will subject permit to cancellation. On or after January 1, 2019, every permit issued shall become invalid unless the work on the site authorized by such permit is commenced within 12 months after its issuance, or if the work authorized on the site by such permit is suspended or abandoned for a period of 12 months after the time the work is commenced. 3) Certified that they read the application and state that the information provided is correct. Agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above -mentioned property for inspection purposes. IMPORTANT: An Application for Permit was made to the Building Official, subject to the conditions and restrictions set forth at the time of application, which is now hereby an Issued Permit. If any part of the information being supplied on this permit is inaccurate or untrue, please contact the City of La Quinta at (760) 777-7125 immediately for correction. Printed: 5/5/26 8:18 am Page 1 of 3 Permit Type Electrical BUILDING PERMIT Permit Number: Property Address BELC2023-0021 47815 VIA TRIESTE ALLEN / INSTALL (1) 240V 60AMP DEDICATED CIRCUIT AT GARAGE ... INSTALL (1) 240V 60AMP DEDICATED CIRCUIT AT GARAGE FOR VEHICLE CHARGING. 2022 CALIFORNIA BUILDING CODES. New Electrical Square 0 Number of Residential 1 Footage Appliances Type Group Sq Ft Value Invoice No. Fee PERM IT-BELC2023-002 BSAS SB1473 FEE APPLIANCES, RES PERMIT ISSUANCE APPLIANCES, RES PC TECHNOLOGY ENHANCEMENT FEE RECORDS MANAGEMENT FEE Total for Invoice PERM IT-BELC2023-0021 Fee Amount Amount Paid $1.00 $1.00 $14.59 $14.59 $110.88 $110.88 $14.59 $14.59 $8.00 $8.00 $11.00 $11.00 $160.06 $160.06 Grand Total for Permit $160.06 $160.06 Workflow Step / Action Name Action Type Start Date End Date Inspections v.1 02/08/2023 0:00 ELECTRICAL FINAL— v.2 Inspection ELECTRICAL FINAL— v.1 Inspection Construction or work for which a permit is required shall be subject to inspection by the building official and such construction or work shall remain visible and able to be accessed for inspection purposes until approved. Approval as a result of an inspection shall not be construed to be an approval of a violation of the provisions of the applicable code and other ordinances of the jurisdiction. Inspections presuming to give authority to violate or cancel the provisions of the applicable code and other ordinances of the jurisdiction shall not be valid. It shall be the duty of the owner or the owner's authorized agent to cause the work to remain visible and able to be accessed for inspection purposes. Neither the building official nor the jurisdiction shall be liable for expense entailed in the removal or replacement of any material required to allow inspection. It shall be the duty of the holder of the building permit or their duly authorized agent to notify the building official when work is ready for inspection. It shall be the duty of the permit holder to provide access to and means for inspections of such work that are required by this code. Printed: 5/5/26 8:18 am Page 2 of 3 BUILDING PERMIT Permit Type: Electrical Permit Number: BELC2023-0021 Property Address: 47815 VIA TRIESTE A building or structure shall not be used or occupied in whole or in part, and a change of occupancy of a building or structure or portion thereof shall not be made, until the building official has issued a certificate of occupancy therefor as provided herein. Issuance of a certificate of occupancy shall not be construed as an approval of a violation of the provisions of the applicable code and other ordinances of the jurisdiction. Certificates presuming to give authority to violate or cancel the provisions of this code or other ordinances of the iurisdiction shall not be valid. A person shall not make connections from a utility, a source of energy, fuel, or power, or a water system or sewer system to any building or system that is regulated by the applicable code and other ordinances of the jurisdiction for which a permit is required, until approved by the buildina official. Printed: 5/5/26 8:18 am Page 3 of 3 WIRING FOR 60AMP EV CHARGER Customer Name_MarkAllen Project Address_ 47815 Via Trieste, La Quinta CA 92253 Garage 11 Hardwired 60amp EV Charger iervice Panel 200amp BELC2023-0021 CITY OF LA QUINTA BUILDING DIVISION REVIEWED FOR CODE COM PLIANCE By: A. DATE 02/0ei12023 INSTALL (1) 240V 60AMP DEDICATED CIRCUIT AT GARAGE FOR VEHICLE CHARGING. 2022 CALIFORNIA BUILDING CODES. ❑ 2 Pole 50 Amp Breaker w/ G13 Cu Romex (m wall) ----❑—Jt�i`IY�&i'd—i-4-��-�eEe�9t188i-i19St-�il------------- - - ---- 0 Standard 40 1 Amp Charging Station In5tall 02 Pole 40 Amp Breaker ,w/3 #8 + 1 #8 Grid 3/4" Conduit )95tandard 60 Amp Charging Station In5tall ❑ 2 Pole 50 Amp Breaker w/ Combination Of Romex € Conduit ❑ 2 Pole GO Amp Breaker w/ 413 Cu Romex (in wall) ❑ Standard 90 Amp Charging Station In5tall 2 Pole GO Amp Breaker w/2 #GCu + #8 Grid 3/4" Conduit ❑ 2 Pole 90 Amp Breaker w/ 2/3 Cu Romex (in Wall) ❑ 2 Pole 90 Amp Breaker w/ 2#4 Cu + #8 Gnd I" Conduit hegge Electrical Contractors Inc. XEw5ting s Service 200 Amp 83-8 J2 Ave. 45 ❑ Exi5ting 5ennce 400 Amps Indio, Ca. 92201 X Denotes Outlet or Charging Station Location Lic# 748171 83852 AVENUE 45 INDIO, CA 92201 CA. LIC# 748171 ELECTRICAL LOAD CALCULATION CUSTOMER Mark Allen DATE February 3, 2023 BELC2023-0021 CITY OF LA QUINTA BUILDING DIVISION REVIEWED FOR COD E COM PUAN CE BY: A. /l am, DATE 091099190-93 SQUARE FEET LIVING 2,036 3 6,108 GD 672 1 672 DW 1,380 1 1,380 SMALL APPLIANCES 1,500 3 4,500 MICRO 1,680 1 1,680 CART CHARGER 0 0 0 DUAL FUEL RANGE 8,100 0 0 SINGLE OVEN 4,800 1 4,800 COOKTOP-GAS 720 1 720 WASHER 720 1 720 GAS DRYER 960 1 960 ELECTRIC PATIO HEATERS 0 0 0 WATER COOL 1,080 0 0 POOL POWER 50 AMP 3,840 1 3,840 LANDSCAPE FUTURE 1,200 1 1,200 TOTAL -KW 26,580 PERCENT KW 1st 10,000 KW 100% 10,000 10,000 REMAINDER 40 % 16,580 6,632 EV CHARGER 60 11,520 1 100% 11,520 FURNACE 1,500 1 100% 1,500 A/C COMPRESSORS #1 6,648 1 100% 6,648 A/C COMPRESSORS #2 5,064 0 100% 0 A/C COMPRESSORS #3 3,960 0 100% 0 A/C COMPRESSORS #4 1,494 0 100% 0 TOTAL 36,300 DIVIDED BY 240 V 151.25 AMPS USE 200 AMP SERVICE T-SLn Gen 3 Wall Connector Manual 48A Single Phase r PRODUCT OVERVIEW This manual applies to Wall Connectors identified by part number 1457768-**-* Product Specifications Voltage and Wiring Nominal 200-240 V AC single-phase Current Output Range 12 - 48 amps Terminal Blocks 12-4 AWG (3.5 - 25 mm2), copper only Supported Conduit Sizing 3/ in (21 mm) default, 1 in (27 mm) optional Grounding Scheme TN/TT Frequency 50/60 Hz Cable Length 7.3 m (24 ft) Wall Connector Dimensions Height: 13.6 in (345 mm) Wire Box Bracket Dimensions Width: 6.1 in (155 mm) Depth: 4.3 in (110 mm) Height: 9.8 in (250 mm) Width: 4.7 in (120 mm) Depth: 2.0 in (50 mm) Weight (including wirebox) 10 Ib. (4.5 kg) Operating Temperature -22°F to 122°F (-30°C to 50°C) Storage Temperature -40°F to 185°F (-40°C to 85°C) Enclosure Rating Type 3R Ventilation Not required Means of Disconnect External branch circuit breaker Ground Fault Circuit Interrupter Integrated, no additional required (CCID20) Wi-Fi 2.4 GHz, 802.11b/g/n Agency Approvals cULus - E351001 Transportation and storage: Ensure that Wall Connector is within storage temperature when moving, transporting, or storing. This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Gen 3 Wall Connector Manual 5 PRODUCT OVERVIEW Circuit Breaker Rating / Maximum Output Power Output For maximum power output, install a standard double pole 60 amp circuit breaker. Wall Connector includes integrated GFCI protection - do not install a GFCI circuit breaker. Wall Connector incorporates automatic load management, which allows the max output to be customized to an existing power supply. If the electrical supply is unable to support the 60 amp configuration, select a lower amperage configuration. Circuit breaker (amps) 60 50 40 30 20 15 Max output (amps) 48 40 32 24 16 12 Power output at 240 volts (kW) .i NOTE: External disconnect switches are neither required nor recommended. 11.5 9.6 7.6 5.7 3.8 2.8 .i NOTE: Circuit breaker size is programmed during the commissioning process. See Commissioning Procedure on page 28 for details. .i NOTE: Some Tesla vehicles may draw less current than the max output. Actual charging rate depends on Wall Connector output and onboard charger in the vehicle. Branch Circuit Conductors and Ground Wire • If installing for less than maximum power, refer to local electrical code to select correct conductors and ground wire size that are suitable for the chosen circuit breaker. • If installing for maximum power, use minimum 6 AWG, 90' C-rated copper wire for conductors. .i NOTE: Upsize conductors if necessary. • For sites with multiple Wall Connectors, each Wall Connector must have its own branch circuit with L1, L2/N, and Ground. • COPPER WIRE TERMINATIONS ONLY for landing in Wall Connector wirebox terminals. Conductors can be stranded or solid. • Hardwire branch circuits to disconnects or circuit breakers. Do NOT install cord -and -plug type connections. • For outdoor installations, use watertight fittings when securing feeder wires to the wirebox. Gen 3 Wall Connector Manual 6 PRODUCT OVERVIEW Grounding Connections Wall Connector must have a ground path back to the main equipment earthing point on site. Without a proper ground connection, the Wall Connector will fault during a ground assurance test. Equipment - grounding conductor must be run with the circuit conductors and connected to the equipment -grounding terminal in the wirebox. Install a ground (PE) wire sized according to local electrical code. Gen 3 Wall Connector Manual