Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
2026 RG General Eng. Inc (8) Fritz Burns Park Improv 2021-02 - Change Order 7
ta 0"fra - GEM of h, DESERT - TO: Jon McMillen, City Manager FROM: Bryan McKinney, P.E., Public Works Director/City Engineer Via: Carley Escarrega, Administrative Technician DATE: June 1, 2026 RE: Contract Change Order No. 7 Fritz Burns Park Improvements Project No. 2021-02 Attached for your signatures is one (1) Contract Change Order No. 7 between RG General Engineering, Inc. and the City of La Quinta for the project referenced above. DESCRIPTION OF CHANGE This Contract Change Order allows for additional pool signage Total $167.26 This Contract Change Order allows for additional knox box Total $3,252.20 This Contract Change Order allows for pool deck coating Total $84,270.30 Total $87,689.76 Please sign and return the original to the City Clerk for final distribution. REQUESTING DEPARTMENT TO CHECK THE ITEMS BELOW AS APPROPRIATE: X Contract payments will be charged to the construction account number: 401-0000-60188-202102-CT Authority to execute this agreement is based upon: City Manager's signature authority provided under Resolution No. 2019-021 for budgeted expenditures of $50,000 or less. X City Council approval on August 5, 2025 The following Budget Summary is provided: Project Budget $ 10,052,000.00 Contract Amount ($ 6,879,699.00) Contract Change Orders No. 1 - 6 ($ 516,092.18) This Contract Change Order No. 7 ($ 87,689.76) Balance Remaining $ 2,568,519.06 As indicated, adequate funding is available. 78-495 Calle Tampico La Quinta, CA 92253 760.777.7000 CAI ffORXIA - CONTRACT: FRITZ BURNS PARK IMPROVEMENTS PROJECT #: 2021-02 CONTRACTOR: RG GRNERAL ENGINEERING, INC. 3594 BLUFF STREET NORCO, CA 92860 CONTRACT CHANGE ORDER NO.7 Pursuant to the terms of the original Contract Agreement, you are hereby directed to make the herein described changes or do the following described work not included in the plans and specifications for this Contract. Unless otherwise stated all work shall conform to the terms, general conditions, and special provisions of the original Contract. DESCRIPTION OF CHANGE This Contract Change Order allows for additional pool signage Total $167.26 This Contract Change Order allows for additional knox box Total $3,252.20 This Contract Change Order allows for pool deck coating Total $84,270.30 Original Contract Amount $ 6,879,699.00 Change Orders No. 1 - 6 $ 516,092.18 Add This Change Order No. 7 $ 87,689.76 Revised Contract Total $ 7,483,480.94 By reason of this contract change order the time of completion is adjusted as follows: - 9 - days added to contract time. The contract completion date shall be: May 28, 2026 Submitted By: �'`� �n�F na c� no oar Date: �n Approved JON McMILLEN, City Manager City of La Quinta, California ta Qa 9ra CALIFORNIA -- We, the undersigned Contractor, have given careful consideration to the change proposed and hereby agree, if this proposal is approved, that we will provide all equipment, furnish all materials, perform all labor, except as may be noted above, and perform all services necessary to complete the above specified work, and hereby accept as full payment the amount shown above, which includes all direct and indirect overhead expenses for any delays. Accepted By: fi—esTstie:� r Contractor: P. i C�i�r12� c E�Cjt",e�� �'1c : Date: 05 RG General Engineering, Inc. Cor # 33 Addition Signage Project: Fritz Burns Park Proposal Date: 5-5-26 Labor Name Description Hours Rate Total Subtotal Labor $ Equipment Type Description Hours Rate Total Subtotal Equipment $ Materials Description QTY Unit Total Addition signage 1 is $144.00 Subtotal Material $ Rate Amount Total Markup Sub 15% $21.60 Markup Equipment $ Markup Labor $ Bond 1 % $1.66 Subtotal Total Cost $167.26 Total Cost $167.26 Agency Representative: Date: Contractor Representative: Date: 5-5-26 CHANGE ORDER REQUEST (COR) TO: Richard Gonzalez COMPANY: RG General Engineering, Inc. EMAIL: richard@rginc.net PHONE #: 951-963-4268 DESCRIPTION OF WORK: DATE: 5/5/2026 COR #: 016 PROJECT #: 25058 PROJECT NAME: Project No. 2021-02, Fritz Burns Park Improvements The addition of (1) NFPA 3-0-0 diamond as requested by the Riverside County Fire Department. (1) additional No Diving Sign, and (1) No Running Sign. THIS CHANGE ORDER TOTAL: $144.00 TIME EXTENSION: CONTRACT TIME WILL BE INCREASED WORKING 5 DAYS CAUSED BY THIS CHANGE. MATERIAL LEAD TIME 4 WORKING WEEKS(S) PLUS 1 WORKING DAY(S) LABOR. THIS CHANGE ORDER REQUEST EXCLUDES THE FOLLOWING: a) Permits, fees, inspections, plans, shop drawings, surveying, site fencing, swpps, barricades, traffic control, flagging, erosion control and dust control. b) Bid, performance, labor, material, completion or other types of bonds, including cost(s) to obtain such bonds. c) Liquidated damages of any kind. d) Any additional items or services not explicitly delineated within "Pricing Includes" above, and/or any item beyond the "limits of the and commercial pool", as specified. WE WILL NOT PROCEED WITH THE ABOVE CHANGE ORDER REQUEST UNTIL DIRECTED /N WRITING TO DO SO. Elizabeth Mendoza Project Manager I California Waters o 949.528.0900 x 129 1 f 949.528.0910 emendoza@californiawaters.com 23311 E. La Palma Ave. I Yorba Linda, CA 92887 we bring water to life I californiawaters.com 23311 E. La Palma Ave. I Yorba Linda, CA 92887 1949.528.09001 californiawaters.com I CA Lic#958960 C _ALIIORMA WATERS CHANGE ORDER WORKSHEET COMPANY: RC General Engineering, Inc. DATE: 5/5/2026 COR M 016 PROJECT M 25058 PROJECT NAME: Fritz Burns La Quinta SUBCONTRACTOR Subcontractor Scope of Services Performed Net Price Total N/A $ $ SUBCONTRACTOR SUMMARY SUBCONTRACTOR SUB -TOTAL $ MATERIAL Material na<rrinri..n - ----- --- - NFPA Diamond 3-0-0 No Diving Sign No Running Sign 1 1 1 ..« r-i- $ 27.43 $ 29.66 $ 32.95 rvovee Total $ 27.43 $ 29.66 $ 32.95 Freight MATERIAL SUMMARY 1 $ 12.98 $ 12.98 MATERIAL SUB -TOTAL SALES TAX Tax 8.75% $ 103.02 $ 9.01 EQUIPMENT RENTAL E ui ment Rental Descri tion t Da s Rate $ $ Misc. I Fuel $ $ Total $ $ [EQUIPMENT RENTAL SUMMARY EQUIPMENT RENTAL SUB -TOTAL $ LABOR Laker Classifiratinn n .. . - - N/A Low, nave Viner $ Iotal Lauor Price $ LABOR SUMMARY LABOR SUB -TOTAL $ SUBCONTRACTOR TOTAL SUBCONTRACTOR MARKUP 0.00% MATERIAL TOTAL MATERIAL MARKUP 15.00% EQUIPMENT RENTAL TOTAL EQUIPMENT RENTAL MARKUP 15.00% LABOR TOTAL LABOR MARKUP 25.00% SUB-TOTAL(1) OVERHEAD & PROFIT 10.00% SUB-TOTAL(2) CCIP GL INSURANCE CREDIT (Per $1,000 in revenue) SUB-TOTAL(3) PERFORMANCE BOND CHANGE ORDER GRAND TOTAL Version 1.2 California Waters 123311 E. La Palma Avenue: Yorba Linda, CA 92887 1 Office; (949) 528-0900 1 Fax949% 528-0910 iHww.caLformawaters.us. SafeIYSIgn.eom phone: 800-274-5271 toll -free - 973-405-2672 Address: 64 Outwater Lane, Garfield, N) 07026 Fax: 800-279-6897 toll -free - 973-340-7809 Email: sales@safetysign.com - support@safetysign.com SafetySign.com / cart Subtotal: $90.04 Low Price Guarantee 6 Subtotal does not include shipping or sales tax. i Check Out Sign in or create an account to save this cart or load a saved cart. Select All Items I Empty Cart Item Description NFPA Diamond 3-0-0 OItem p: M3362-11AL Edit Item I Remove Full Product Details Size: 11" Diamond Material:.040" Rust -Free Aluminum Mounting: Four 7/32" holes (one in each corner) Packaging: Sold Individually oty 1 Price: $27.43 NO ® No Diving Sign DIVING Item p: F8220-B6C Edit Item I Remove Full Product Details Size:18 • 12" Material:.063" White Rust -Free Aluminum Laminate: None Mounting: Four 1/4" holes (one in each corner) Packaging: Sold Individually aty Price: $29.66 ❑ No Running Sign Item M F7671-ABC Edit Item I Remove Ships Thursday Quantity Price Full Product Details Size: 12 x 18" Material:.063" White Rust -Free Aluminum Laminate: None Mounting: Four 1/4" holes (one in each corner) Packaging: Sold Individually oty Price: $32.95 Select All Items I Empty Cart Sign in or create an account to save this cart or load a saved cart. To buy with a purchase order, open a Brimar Net30 account. Subtotal: $90.04 Low Price Guarantee 9 Subtotal does not include shipping or sales tax. Shipping Estimator Enter a US ZIP code and select your delivery location type to preview your shipping options. Need to ship outside the US? No problem; proceed to checkout to calculate shipping. US ZIP Code 92887 0 Business Delivery For Commercial Addresses O Home Delivery For Residential Addresses Estimate Shipping The prices below are based on discounted FedEx, UPS, and USPS quotes for your ZIP code. The classification of residential and commercial addresses is determined by the shipping carrier. Your shipping rates may differ during checkout when your full address is supplied to FedEx, UPS, and USPS. Shipping Method UPS Ground Price $12.98 Estimated Arrival Shipping Method FedEx Ground May 13. Price $14.27 Estimated Arrival Shipping Method UPS 3 Day Select May 13 Price $24.62 Estimated Arrival Shipping Method UPS 2nd Day Air May 12 Price $30.66 Estimated Arrival Shipping Method FedEx Express Saver May 11 Price $31.09 Estimated Arrival Shipping Method FedEx 2 Day May 12 Price $37.18 Estimated Arrival Cor # 34 3200 Series Knox Box Project: Fritz Burns Park Labor RG General Engineering, Inc. Proposal Date: 5-5-26 Name Description Hours Rate Total Subtotal Labor $ Equipment Type Description Hours Rate Total Subtotal Equipment $ Materials Description QTY Unit Total Knox Box 3200 series 1 is $2,800.00 Subtotal Material $ Rate Amount Total Markup Sub 15% $420.00 Markup Equipment $ Markup Labor $ Bond 1 % $32.20 Subtotal Total Cost $452.20 Total Cost Agency Representative: Contractor Representative: $3,252.20 Date: Date: 5-5-26 Wolverine Fence _ *Signatory to _Laborers Union* We Devour The Competition" RG Engineering Attn: Richard Gonzales Re: PCO PROPOSAL For Fritz Burn Park 5-4-26 Furnish and Install: Item #1: 1 ea. 3200 Series Knox Box Vault mounted to Gate Post. LumpSum =--------------------------------------------------------------------------------------$2,800.00 If you have any questions please call me at 1-562-948-2030 Sincerely, Lonnie Lopez President This Proposal is Valid for 30 Days 930 SOUTH CYPRESS ST LA HABRA CA 90631 PHONE: 562-948-2030 FAX 562-948-2354 STATE CONTRACTORS LICENCE #870586 DIR #1000009678 RG General Engineering, Inc. COR Date: 5-10-26 Attn: Ubaldo Project: Fritz Burns Park The following is the scope of work for the above project: Multi Coat Decorative Pool Deck Color C-40 Oyster White Per the approved Submittal and Per Attached sheet L.3-1 8 of 48 With a total sf of 5,465 sf Total: $ 84,270.30 Richard Gonzales — President 3594 Bluff St. Norco, CA. 92860 (951) 963-4268 Email: richard@rginc.net CSLB #1086241 CSLB #1086241 DIR #1000979066 l Vil30 9Z/6Z/90 Wiio HiSNOO 2JOJ wz=i Y 0 F: aF00 O w� o a - P. o o w��_ w� oywz w� a Omoz°�LLmapm¢0wN z °yyrc OyF��oiw .0owoO0 O �F¢w wNp p° rcwwo o8wi w NpN= w a w= oN w=u 0EZFFzwb ogF Flzo wn= x000�wo OWwa ,w-oR— 0 zNLLN waSw w Q o3¢z z w3 w z wa— LL-°w a< p2 z z 0w0 w8� KKU =Fw° ` ywU�a-w o o wWaN a� oasfa _ =ww=t F �iZ. �imow aw z z w°W°z 0 y 0� w S °y9-m yw > = i piawrc rc wwrc N> 0o J wwy a wwaow Fare z ¢ yia ¢m wM, wN ow 4 zw =yaw OzwLL - _ =w== !ZZ Nw N wwYrcm zt� rcr a o 'E- -za Nb a° o- - Ea°sw w-� a°a° ap °F J� ° W m - ,ow o w �3: w �a rc J o YIpoay 1 o aaJo ui Frc° °z� ¢3 0 ¢ W 5 p <Smw O� (l F� z J rc� m�o wU m wwzr �wz 0¢= �5¢ 0 w w < zg w� °zing wa zw OUQm boa z-;e Oz o r (n W aKFzw aOo mW dz�� o�F Qom 6w0 z5 R.w a HQ z. yw�Fao w. Nw rcy yom� �jOo ° J oao Fs m ZIm Z omwpmF 00 oti wo o&ym �ww w d (� °zaa58 o00 °5 G� o�rcw- ww- Naw m� w �aN ��- �° .F w6°� z°w w m �rcz Z F¢z<iQ FF Fw F� FZO waN Fwr UwZ M iw O ~ °w5woo �wN uE oo oo� a>LL 18� wow yz g=�� _� =w =o� ors ��� m o C FfFgQ6 FU F = F>U4 FULL UULL ua6 �rdl������������ ....'. -- . ..Oz '1 Z. 0. t .;_ z, .......... .... Imim .. - ----- zW. ! > O »d d w ...>.::..., o z I. I: . . : I:::; O a� - Utw6) ww �� ws zz 3. 35 zp 00 00 00 oz� 9 �w= U�- IjK O ry m iw w Ua� Jwr rc w > ozo i h z6- wz 5 yzw rca ° aw< u 0 zpes ow�o�()= ffis566 mw a €9111 oy=zaa �wFaow s$� gs �$ w� aS16 B z�� wmcwiw 0 E� all I QF s Ml z=z ?E aww° N oWa= — w W z¢~ F �o� =1= WERZ, 0 Q I Of Zzg �0w �a J Q O i U a Z z �Yg �aaa C, w <�V mU) o0Z ,Ez U � 0 rc RG General Engineering, Inc. PROPOSAL Date: 4-22-26 Attn: Ubaldo Project: Fritz Burns Park The following is the scope of work for the above project: Multi coat Decorative Pool Deck See attached Links with this email Conditions: CSLB #1086241 DIR #1000979066 Color C-40 Oyster White 5/5/26 SHOP DRAWING / SUBMITTAL REVIEW ❑ APPROVED [K APPROVED WITH CHANGES NOTED ❑ REVISE AND RESUBMIT ❑ REJECTED Submittal was reviewed for design conformity and general conformance to contract documents only. The contractor is responsible for confirming and correlating dimensions at job sites for tolerances, clearances, quantities, fabrication processes, techniques of construction, coordination of work with other trades, and full compliance with Contract Documents. BY. DATE: 4/24/26 In -Site Landscape Architecture, Inc. San Diego. CA Proposed start date 5-14-26 it will take 7 days to complete work, work base on 5,000 sf if less than 2,500 sf we would have to re -price Total: $ 15.42 Per sf Notes: 1. Concrete surfaces shall be prepared per manufacturer's instructions. 2. Multicoat "Concrete Vapor Seal" shall be installed per manufacturer's instructions. 3. Multicoat "Krete Coat System" shall be installed per manufacturer's instructions. Layer 1 shall be trowel installed base coat Layer 2 shall be hopper installed with "knock down" finish. 4. Multicoat "Acrathane-Colorseal" shall be installed per manufacturer's instructions. (Two coats). 5. Color shall be: "Natural White" C10 Richard Gonzales — President 6. Pool coping, pool tile, stairs, fencing, and similar items shall be protected from product overspray, dripping, spilling, etc. during the installation process. 7. A minimum of 72 hours is required prior to placing pool furniture and public use. 8. See attached product data sheets CONCRETE VAPOR SHIELD PRODUCT DESCRIPTION 00 '�010 A Tech Data Sheet Vapor Shield is a chemical hardener, densifier, and soluble chloride reducer used over bare concrete prior to cementitious overlay applications. Vapor Shield blocks and reduces vapor emissions through the concrete but leaves concrete breathable, blocks hydro- static pressure up to 20 psi., does not alter color of concrete, nor does it make the surface slippery or less slippery. Vapor Shield helps to reduce dust on floors, reduces the green window from 28 days to an average of 5 days PRIMARY USE Vapor Shield is a clear permanent application that preserves and seals new and existing pneumatic poured or poured -in -place con- crete, seals the complete matrix, and helps preserve its embedded steel. Vapor Shield is a pro -reactive catalytic agent that reacts with free alkali and /or alkali hydrates by filling pore spaces and aggregate 'void areas' with an 'internally produced' silica hydrogel. Alkali is converted to a neutral compound, thereby reducing potential internal chemical reactions. Concrete becomes a denser, stronger bond and is a permanent hydrostatic seal from within. Vapor Shield enhances the bonding quality of concrete shells to be painted or plaster -coated, prevents peeling, cracking, and loss of bondability due to capillary moisture or internal chemical reactions. Vapor Shield will not alter surface appearance or physical features, protects pool shell from damage, such as spalling from freezing/ thaw cycles, neutralizes existing acids and chloride corrosives and reduces rusting/deterioration of embedded steel. Vapor Shield eliminates efflorescence and prevents chemically treated pool water from passing through the pool shell and leaching into the ground water supply. COMPOSITION Vapor Shield is a sensitive water -based reactive catalyst in a proprietary colloidal silicate formulation that produces a silica hydrogel below the surface within the concrete substance. BENEFITS PHYSICAL PROPERTIES - Accelerated "green window" by about 500% - Moisture vapor penetration blocker - Strengthens and hardens concrete - Protects reinforced steel - Freeze -thaw protection - Deep below surface penetration (3-5 inches) - Reduces efflorescence bleed -through stains - No leaching pool chemical into ground water - Water based — environmentally safe - No VOC / VOS content - Helps maintain pool water chemical balance APPLICABLE Vapor Shield STANDARDS ASTM C-672 Section 7 Water Absorption ASMT C-672 Section 9 Suction ASTM C-672 Section 10 Efflorescence ASTM C-666 Freeze -Thaw Resistance ASTM C-666 Salt Attack Resistance DIN 1048 ASTM C-192 Strengthens Concrete AASHTO T260 Chlorine Ion Content AASHTO T259-78 Chloride Ion Penetration VOC / VOS Compliant PHYSICAL LIQUID COLOR CLEAR ODOR NONE SPECIFIC GRAVITY 1.11 +/- FLASH POINT NONE pH 12 +/- TOXICITY NONE BOILING POINT 212F / 100C FREEZE TEMPERATURE 32F / OC HAZARDOUS VAPORS NONE WEIGHT PER GALLON 9.18 LEIS / 4.16KG ENVIRONMENTAL NEUTRAL USER-FRIENDLY YES SHELF LIFE 24 MONTHS SURFACE BONDING EXCELLENT FLAMMABLE NO VOC / VOS CONTENT NONE RESISTANCE TO UV EXCELLENT PAINTABLE YES POLLUTANTS NONE WASTE DISPOSAL METHOD NON -HAZARDOUS RESISTANCE TO ABRASION EXCELLENT POLYMERIZATION NIL SOLIDS BEFORE APPLIED NIL R-FACTOR 100% FREEZE HARM NONE ALLOW TO THAW COVERAGE 200 SF PER GALLON MUTICOAT CORPORATION For Professional Use Only Ranc Antonio Parkway Rancho Santa Margarita CA 92688 949-888-7100 www.MultiCoat.com CONCRETE VAPOR SHIELD Tech Data Sheet INSTALLATION -JOB CONDITIONS - Penetration: Must have direct access to substrate. Any previous coatings must be removed - Abrasion of surface could be required to allow penetration. To test the surface for Vapor Shield penetration place a spot of water approximately the size of a 50 cent piece on the surface, if the water absorbs into the surface entirely within 15 minutes, no abrading is required. If the water sits on the surface or the surface beads water, the surface must be mechanically or chemically abraded. - High Temperatures: When ambient temperature is at or above 95F, cool down the surface by saturating with cold water and allow surface to remain damp. Remove any puddled water. - Wind: Take caution in windy conditions as not to allow product to make contact with unintended surfaces. - Drying: Drying: Dried Vapor Shield can etch glass or dull bright aluminum. When contact is made, immediately rinse with water before the product dries. - Product Strength: DO NOT DILUTE. Use as supplied and directed. - Plaster Coatings: After Vapor Shield has been applied, (not a new shell) wait 24 hours or until the surface is completely dry before applying a breathable plaster coat. (Note: For new concrete, it is recommended to wet cure according to ACI 506.2- 95, section 3.8) - Fractured Concrete: Vapor Shield seals only the concrete, not any fractures. APPLICATION: ON SLABS, WALLS, POOLS, PONDS & FOUNTAINS Thoroughly clean surface of any oils, grease, cleaning agents, curing agents, coatings, sealers, any contami- nants that has purged to the surface, and any product that could prevent Vapor Shield from penetrating. 1. Vapor Shield is to be applied with a low-pressure sprayer. The sequence of application should be as follows: spray the surface with water, then the Vapor Shield, again with water, then Vapor Shield, and one last time with water only, using a cross hatching motion. During this time, the entire surface area should be well saturated but not allowed to puddle and not allowed to dry. 2. Spray Technique Spray with about a 50% overlap of each stroking motion. For horizontal surfaces: stroke in fanning motion from `left to right' with the first application, and then the second application with an 'up an down' fanning pattern. For vertical surfaces: apply from top to bottom using a `left to right' fanning pattern with the first application and then repeat the same for the second coat. Hold sprayer 8" -12" from concrete surface. 3. Remove any Excess Vapor Shield Excess un-reacted Vapor Shield can leave white crystals on the concrete, Use a broom to push around excess puddled material to push into pores and prevent puddling. Material on surface will react if not and must be removed. 3. Cure Time Allow 24 hr cure time prior to coating the concrete with sealers, epoxies, etc. COVERAGE 200 sf per gallon PRECAUTIONS Vapor Shield does not perform when: - other sealants are on the concrete surface - polymers are in the mix - rebound in pneumatically applied concrete - cover all glass to prevent etching - cover all items not intended for product use - immediately flush accidental over -spray with water - can discolor aluminum - do not use when air or surface temperature is below 40F/4.5C - do not use if temperature will drop below 40F/4.5C within 6hrs. PERFORMANCE VOC's - Rule 1168 of CA. SCAQMD: - Og per L Moisture Vapor Redustion: - >96% per ASTM E96-05 (10 milsDFT) Pull -off Adhesion / Bond Strength: -1,000 psi (6.9 MPa) with failure in concrete substrate (at 28 days per ASTM D7234 Resistance to High Alkalinity: pH 14 plus or minus -14 day spot test, covered - no effect -14 day spot test, uncovered - no effect -14 day immersion - no effect MUTICOAT CORPORATION For Professional Use Only 23331 Antonio Parkway Rancho Santa Margarita CA 92688 949-888-7100 www.MultiCoat.com A SupermBonding, Flexible Cernentitious Coating for Concrete Restoration. DESCRIPTION & USE The MULTICOAT KRETE KOTE 2000 System is a super bonding, flexible synthetic resin modified cementitious coating which forms a cost effective, durable, anti-skid, weather and chemical resistant surface over properly prepared substrates. It can be applied to driveways, walkways, steps, pool decks, and most concrete surfaces. ADVANTAGES • Bonds securely to structurally sound concrete • Easy to apply and cost effective • Fast curing time - short down time • Resistant to moisture penetration, salt spray and most chemicals • High flexural strength - will withstand moderate flexing, unlike most concrete repair coatings • High impact resistance • Resistant to freeze -thaw conditions • Multiple decorative anti-skid finishes and designs are available • Mulitple color selections • Water base - environmentally safe to use and apply SEE TEST DATA SURFACE PREPARATION: Substrate must be structurally sound, free from grease, oil, paint, dirt, dust, sealers, laitence, curing compounds and other foreign materials which may prevent proper bonding. Cracks and imperfections must be repaired. Properly installed expansion joints should be cleaned. APPLICATION MULTICOAT KRETE KOTE and TOP COAT 2000 are furnished in 65 lb. bags and field mixed with potable (clean) water in the approximate amount of 13/4-2 gallons per bag, preferably with a special MULTICOAT Mixing Paddle. Mix vigorously to disperse all lumps and to thoroughly wet all particles,. Suggest 1-11/2 minutes after all dry material added. Use margin trowel to clear vessel sides. Adjust to desired consistency by addition of dry material or small amount of water. For best results let Krete Kote or Top Coat stand in bucket for 3-5 minutes, then add a small amount of water and rebreak material. This will give additional pot life. Mixed KRETE KOTE and TOP COAT 2000 are applied by roller, trowel, or squeegie in one coat plus texture coat, or two or more coats plus texture coat, depending on surface condition. With Hopper Gun - Trowel Knock Down to achieve French Lace Texture. ACRATHANE COLORSEAL must be applied in two thin coats. First Coat - Mix Colorseal to uniformity with slow speed mixer. With continuous mixing, add clean water in ratio of 1 part water to 3 parts Colorseal. APPLY DILUTED COLORSEAL WITH'/z" TO 3/a" nap roller, using firm pressure. Allow a minimum of (1) hour to dry. SURFACE PREPARATION CRACK REPAIR WITH SPEED BOND (SEE CRACK REPAIR SYSTEM). I BASE COAT APPLICATION —TROWELED Jv- - FINISH COAT —TEXTURED HOPPER GUN — KNOCK DOWN ACRATHANE COLORSEAL MC311 PACKAGING AND STORAGE (Note: ACRATHANE Clear Sealers are applied in one or two coats full strength. DO NOT DILUTE.) Second Coat - DO NOT DILUTE COLORSEAL! Mix to uniformity only. Apply with firm pressure. DO NOT APPLY THICKER THAN RECOMMENDED! Airless sprayer may be used for final coat. Allow to cure for a minimum of 24-48 hours before commencing foot traffic, 72 hours for vehicular traffic. COVERAGE Each 65 lb. of KRETE KOTE or TOP COAT 2000 as described under "APPLICATION," will cover approximately 125-150 sq. ft. depending on surface contitions(2 coats) or 65 sq.ft. (3 coats). Each gallon of ACRATHANE COLORSEAL will cover approximately 150-200 sq. ft. per gallon, depending on surface texture and/porosity. (See ACRATHANE COLORSEAL Instructions for use). LIMITATIONS Do not apply if substrate temperature is below 40OF or above 100°F, or if ambient temperature below 40OF above 1000F. Do not apply if precipitation is expected within a twenty four (24) hour period. DO NOT USE IF CONCRETE SLAB MAY BE SUBJECT TO NEGATIVE SIDE WATER OR WATER VAPOR PRESSURE Do not bridge expansion or control joints with the Krete Kote System. All expansion or control joints must be cut and cleaned out and filled with approved caulking material KRETE KOTE or TOP COAT 2000 are furnished in 65 lb bags. ACRATHANE COLORSEAL is furnished in 1 and 5 gallon containers. Store in dry area at 40°- 90°F. Shelf life is approximately 24 months in unopened bags and approximately 18 months in unopened pails. DAMAGE LIMITATION Seller shall not be liable for any damages, injury, loss, direct or consequential, resulting from its products. The parties intend that the limitation of damages, including consequential damages, applies even if the exclusive remedy provided for herein fails of its essential purpose. EXCLUSIVE REMEDY Seller's sole obligation, and buyer's exclusive remedy shall be to replace material if found to be defective. WARRANTY DISCLAIMER There are no warranties which extend beyond the description of the fact hereof. Seller expressly disclaims all other warranties regarding the use of its products, whether expressed or implied, including the implied warranties of merchantability and for fitness of a particular purpose. Since use of the product is beyond the Seller's control, the Buyer assumes all risk of use. WARRANTY Materials are guaranteed with respect to uniformity and quality within manufacturer's specifications. TEST DATA - KRETE KOTE 2000 / TOP COAT 2000 TEST METHOD RESULTS 1. Weatherometer.............................................. ASTM G23.............................................................................................................................. 2000 hrs - Passed 2. Compressive Strength .................................. ASTM C109...................................................... 45 Days air cured.......................................................2595 psi 3.Tensile Strength ............................................... ASTM-C190............................................................................................................................................... 457 psi 4. Bond Strength (Flatwise Tension) ................... ASTM-C297............................................................................................................................................... 225 psi 5. Abrasion Test .................................................. ASTM-1242A..................................................... 1000cyc-1000gms.................................................. 39 mil loss 6. Salt Spray ....................................................... ASTM-B117............................................................................................................................... 300 hrs - Passed 7.Water Vapor Transmission ............................... ASTM-E96A.......................................................................................................................................... 8.5 Perms 8.50-Cycle Freeze thaw ...................................... ASTM-C67 ................................................................................................................................................ Passed 9.Flexural Strength ............................................. ASTM-D790............................................................................................................. Modulus of Rupture - 770psi 10. Impact Resistance ........................................ MIL-D-3134F ............................................................................................................................................. Passed 11. Flame Spread ............................................... ASTM-E84 ................................................................................................................................................. Class A MULTICOAT° CORPORATION West Coast Toll Free: (877) 685-8426 (949) 888-7100 Fax (949) 888-2555 Website: www.multicoat.com E-mail: info@multicoat.com MULTICOAT° PRODUCTS, INC. AVAILABLE THROUGH East Coast Toll Free: (800) 660-6729 (304) 586-0616 Fax (304) 586-0620 Website: www.multicoat.com E-mail: info@multicoat.com MMEINTHEUM MC311 The Coating of the Future... Today High Quality Decorative Protective Sealers. DESCRIPTION & USE Multicoat's ACRATHANE COLORSEAL consists of a series of high quality waterbase modified resins that provide a high quality, durable seal on masonry, cementitious, and other building substrates. Colors are factory blended to insure uniformity. ACRATHANE COLORSEAL is designed for application to a variety of Multicoat's Systems, most notably the KRETE KOTE System. It provides a tough, color consistent, durable and wear resistant protection to surfaces subject to heavy foot and moderate vehicular traffic. Ideally suited for pool decks. ACRATHANE CLEARSEAL is also a water base material. Not typically used in Colorseal applications, however it can be used to achieve a glossy, wet look. Is also used in conjunction with MULTI -STAIN to lock in the color. CLEARSEAL can also be used on most masonry and stone substrates. ADVANTAGES: • Long Wearing • Enhances Appearance • Easy to Clean • Multiple Color Availability • Weather Resistant • Water Base - Green Friendly • Ideal for Re -Sealing Old Kool-Deck • Chemical Resistant for Pool Decks APPLICABLE STANDARDS Meets USDA criteria for use in meat, poultry, and food processing. SEE TEST DATA SURFACE PREPARATION Substrate must be structurally sound and free from grease, oil, dirt, dust, sealers, water repellents and other foreign materials which may interfere with proper bonding. Surface must be completely dry prior to COLORSEAL or CLEARSEAL application. Multicoat KRETE KOTE and TOP COAT must be allowed to set up and cure for at least 24 to 48 hours before COLORSEAL application. New concrete should be allowed to cure for a minimum of 20 days, and be free from curing compounds, release agents if any, and other water repellent materials which may prevent proper bonding. Do not use on treated lumber. Mid t110Y �P£l11nc ONE GALLON CANS FIVE GALLON PAILS r ARC- v ti 1 APPLY DILUTED FIRST COAT OF ACRATHANE COLORSEAL WITH ROLLER. SECOND COAT (FULL STRENGTH COAT) CAN BE APPLIED BY AIRLESS SPRAYER OR ROLLER. iE�` CLEARSEAL GOES ON WHITE AND DRIES TO A CLEAR FILM IN MINUTES. CAN BE ROLLED OR SPRAYED. C MC311 COLORSEAL APPLICATION Multicoat COLORSEAL must be applied in two coats. First Coat: Mix COLORSEAL to uniformity with slow speed mixer. With continuous mixing add clean water in ratio of 1 part water to 3 parts COLORSEAL. Apply diluted COLORSEAL with nap roller with very firm pressure. (1/2" nap roller for smooth and 3/4" nap roller for rough surfaces). Allow a minimum of one (1) hour to dry. Second Coat: Mix to uniformity only. Apply with firm pressure. DO NOT APPLY THICKER THAN RECOMMENDED. Airless sprayers may be used for the final coat. Allow final coat a minimum of 24 hours before placing area into use. Will fully cure in 14 days, during which care should be exercised against excessive abuse. Each pail has a `lot' number. Do not mix lot numbers during the final coat. If more than one lot number must be used, box the material to insure color uniformity. CLEARSEAL APPLICATION Mix to uniformity with slow speed mixer. DO NOT DILUTE CLEARSEAL, use as packaged. One coat application is recommended for a semi -gloss appearance. Two coats will have a shiny gloss appearance. Clear Seal goes on white and dries clear. LIMITATIONS Do not apply if substrate temperature is below 40OF or above 100°F, or if ambient temperature below 40OF above 1000F. Do not apply if precipitation is expected within a twenty four (24) hour period. COVERAGE ACRATHANE COLORSEAL and CLEARSEAL: 200 - 300 sq. ft. per gallon depending on surface texture, porosity and method of application. PACKAGING AND STORAGE COLORSEAL and CLEARSEAL: Furnished in 1 gallon cans and 5 gallon Pails. Shelf life approximately 18 months in unopened containers. Store at 400 to 900 F in a dry environment. DAMAGE LIMITATION Seller shall not be liable for any damages, injury, loss, direct or consequential, resulting from its products. The parties intend that the limitation of damages, including consequential damages, applies even if the exclusive remedy provided for herein fails of its essential purpose. EXCLUSIVE REMEDY Seller's sole obligation, and buyer's exclusive remedy shall be to replace material if found to be defective. WARRANTY DISCLAIMER There are no warranties which extend beyond the description of the fact hereof. Seller expressly disclaims all other warranties regarding the use of its products, whether expressed or implied, including the implied warranties of merchantability and for fitness of a particular purpose. Since use of the product is beyond the Seller's control, the Buyer assumes all risk of use. WARRANTY Materials are guaranteed with respect to uniformity and quality within manufacturer's specifications. TEST DATA - ACRATHANE COLORSEAL/CLEARSEAL TEST METHOD RESULTS 1. Chemical Resistance Test .............................. ASTM D2299 Turpentine............................................................. 1 Gasoline................................................................1 TEST RESULTS KEY Paint Thinner......................................................... 1 1. Unaffected Lubricating Oil ....................................................... 1 Sulfuric Acid-3%................................................. 2 2. Superficial Affect (Will Hydraulic Fluids .................................................... 3 need to be cleaned.) Toluene..................................................................1 Salt Solution 20%.................................................. 1 3. Considerable Affect Muratic Acid 10%.................................................. 1 (May have to re -seal) Prestone Coolant ................................................... 1 ® MULTICOATO CORPORATION MULTICOATO PRODUCTS, INC. West Coast East Coast Toll Free: (877) 685-8426 Toll Free: (800) 660-6729 (949) 888-7100 Fax (949) 888-2555 (304) 586-0616 Fax (304) 586-0620 Website: www.multicoat.com Website: www.multicoat.com E-mail: info@multicoat.com E-mail: info@multicoat.com AVAILABLE THROUGH MMEINTHEUM MC311 The Coating Of the Future... Today � � < < �® \< /° <� �� �� d� k\7 �B )/ «) F-_ /e 2 }= S /\{{ }� $G \� /� \Ol � \\\ƒ o ;a � eE}a ®!-! }$o `/ \_ 1 < < n \ y )\$ S \ z= ± l+,� SO co §/\�O� � � \{f 0 2 » Cl - \\\} %f!/ ` < (e \ \ §(\ R &\ #§ <a k� IX) z $© /� < }\ƒ cn G § z )z, Luu \§ \\ }§ _ / LLJ / \\ § e<\ §« i k \w\ ) aE L CY CY LU a 2 LU /�\\e S¥ Leu c/ § \° < 0 � w w El §=/y $t \/b/\ / 2021-02 - RG General - Fritz Burns Park Improvements - CCO 7 Final Audit Report 2026-05-20 Created: 2026-05-20 By: Carley Escarrega (cescarrega@laquintaca.gov) Status: Signed Transaction ID: CBJCHBCAABAAv6tvo3MZ-AbgRwJgb6kBcjmEGKY5xjfh "2021-02 - RG General - Fritz Burns Park Improvements - CCO 7" History Document created by Carley Escarrega (cescarrega@laquintaca.gov) 2026-05-20 - 3:16:37 PM GMT Document emailed to uayon@laquintaca.gov for signature 2026-05-20 - 3:16:59 PM GMT Email viewed by uayon@laquintaca.gov 2026-05-20 - 3:18:20 PM GMT Signer uayon@laquintaca.gov entered name at signing as Ubaldo Ayon 2026-05-20 - 3:51:07 PM GMT Document e-signed by Ubaldo Ayon (uayon@laquintaca.gov) Signature Date: 2026-05-20 - 3:51:09 PM GMT - Time Source: server - Signature Appearance Selected: DRAW Document emailed to bmckinney@laquintaca.gov for signature 2026-05-20 - 3:51:15 PM GMT Email viewed by bmckinney@laquintaca.gov 2026-05-20 - 4:09:11 PM GMT Signer bmckinney@laquintaca.gov entered name at signing as Bryan McKinney 2026-05-20 - 4:09:55 PM GMT Document e-signed by Bryan McKinney (bmckinney@laquintaca.gov) Signature Date: 2026-05-20 - 4:09:57 PM GMT - Time Source: server - Signature Appearance Selected: TYPE Agreement completed. 2026-05-20 - 4:09:57 PM GMT 0 Adobe Acrobat Sign