The URL can be used to link to this page

Home My WebLink AboutSA 2016-0003BUILDING PERMIT DESIGN & DEVELOPMENT DEPARTMENT 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 Permit Type: Sign Permit Number: SA2016-0003 Property Address: 50777 SANTA ROSA PLAZA APN: 770020031 Legal Description Property Zoning: Valuation: $1,000.00 PHONE (760) 777-7125 WWW.LAQUINTACA.GOV APPLIED DATE: 01/15/2016 ISSUED DATE: 01/22/2016 CALIFORNIA Owner: GERRI LYNCH 50-777 SANTA ROSA PLAZA, LA QUINTA, CA 92253 Applicant: KRISTINA BRADY 550 W. 6TH AVE, ESCONDIDO, CA 92025 Contractor: MATTHEWS SIGNS INC 550 W 6TH AVENUE, ESCONDIDO, CA 92025 PRIOR TO THE ISSUANCE OF THIS PERMIT FOR CONSTRUCTION, ALTERATION, IMPROVEMENT, DEMOLITION, OR REPAIR THE OWNER, APPLICANT AND/OR CONTRACTOR UNDER PENALTY OF PERJURY HAVE AFFIRMED WHEN APPLICABLE, THROUGH THE SUBMITTAL OF FORMS OR BY OTHER ELECTRONIC MEANS, THE FOLLOWING: LICENSED CONTRACTOR OR OWNER -BUILDER DECLARATION (1 or 2) 1) They are licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, and the referenced License is in full force and effect, or; 2) That they are exempt from the Contractors' State License Law for the reason(s) indicated by either (2)(a) and/or (2)(b), or (2)(c) where he or she is exempt from licensure by a valid exemption. [Section 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractors' State License Law (Chapter (commencing with Section 7000) of Division 3 of the Business and Professions Code] Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).) a) As owner of the property, or my employees with wages as their sole compensation, will do all of or portions of the work, and the structure is not intended or offered for sale (Section 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who, through employees' or personal effort, builds or improves the property, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the Owner -Builder will have the burden of proving that it was not built or improved for the purpose of sale.). b) As owner of the property, will be exclusively contracting with licensed c) Are exempt from licensure under the Contractors' State License Law. As an Owner -Builder, they acknowledge that, except for their personal residence in which they must have resided in for at least one year prior to completion of the improvements covered by this permit, they cannot legally sell a structure built as an owner -builder if it has not been constructed in its entirety by licensed contractors. It is understood that a copy of the applicable law, Section 7044 of the Business and Professions Code, is available upon request when this application was submitted at the following Web site: http://www.leginfo.ca.gov/calaw.html. DECLARATION REGARDING CONSTRUCTION LENDING AGENCY (If applicable) A construction lender will be used for completion of the improvements covered by this permit and the name and information of which is on file for public inspection during the regular business hours of the public entity. Failure of the applicant to indicate the construction lender on the application does not relieve that person of the requirement to give the WORKERS' COMPENSATION DECLARATION (1, 2 or 3) WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000), IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. 1) Has and will maintain a certificate of consent to self -insure for workers' compensation, issued by the Director of Industrial Relations as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 2) Has and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 3) Certifies that, in the performance of the work for which this permit is issued, shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if should become subject to the workers' compensation provisions of Section 3700 of the Labor Code, shall forthwith comply with those provisions. NOTICE TO APPLICANT (1, 2 and 3) 1) Each person upon whose behalf this application was made, each person at whose request and for whose benefit work is being performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and employees for any act or omission related to the work being performed under or following issuance of this permit. 2) Any permit issued as a result of this application becomes null and void if work is not commenced within 360 days from date of issuance of such permit, or if cessation of work for 180 days will subject permit to cancellation. On or after January 1, 2019, every permit issued shall become invalid unless the work on the site authorized by such permit is commenced within 12 months after its issuance, or if the work authorized on the site by such permit is suspended or abandoned for a period of 12 months after the time the work is commenced. 3) Certified that they read the application and state that the information provided is correct. Agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above -mentioned property for inspection purposes. IMPORTANT: An Application for Permit was made to the Building Official, subject to the conditions and restrictions set forth at the time of application, which is now hereby an Issued Permit. If any part of the information being supplied on this permit is inaccurate or untrue, please contact the City of La Quinta at (760) 777-7125 immediately for correction. Printed: 7/2/26 9:52 am Page 1 of 4 BUILDING PERMIT Permit Type: Sign Permit Number: SA2016-0003 Property Address: 50777 SANTA ROSA PLAZA construction lender preliminary notice from that duty. Printed: 7/2/26 9:52 am Page 2 of 4 BUILDING PERMIT Permit Type: Sign Permit Number: SA2016-0003 Property Address: 50777 SANTA ROSA PLAZA (1) NEW SET OF ILLUM. CHANNEL LETTERS ON EXISTING MONUMENT ` Location on premises Sign Illuminated? No Number of Wall / 1 Awning Signs w/ Electrical Type Group Sq Ft Value Invoice No. Fee PERMIT-SA2016-0003 WALL/AWNING SIGN, FIRST PC Credit Card Fee Credit Card Fee WALL/AWNING SIGN, FIRST BSAS SB1473 FEE SIGN PERMIT - PL Fee Amount Amount Paid $87.02 $87.02 $2.48 $2.48 $4.40 $4.40 $24.66 $24.66 $1.00 $1.00 $200.00 $200.00 Total for Invoice PERMIT-SA2016-0003 $319.56 $319.56 Grand Total for Permit $319.56 $319.56 Workflow Step / Action Name Action Type Stan. Date End Date Inspections v.1 01/15/2016 0:00 ........................................................................................................................................ FINAL" v.3 Inspection ........................................................................ FINAL" v.2 Inspection - --------------------------------------------------------------------------------------------------------------------------------------- FINAL" v.1 Inspection Construction or work for which a permit is required shall be subject to inspection by the building official and such construction or work shall remain visible and able to be accessed for inspection purposes until approved. Approval as a result of an inspection shall not be construed to be an approval of a violation of the provisions of the applicable code and other ordinances of the jurisdiction. Inspections presuming to give authority to violate or cancel the provisions of the applicable code and other ordinances of the jurisdiction shall not be valid. It shall be the duty of the owner or the owner's authorized agent to cause the work to remain visible and able to be accessed for inspection purposes. Neither the building official nor the jurisdiction shall be liable for expense entailed in the removal or replacement of any material required to allow inspection. It shall be the duty of the holder of the building permit or their duly authorized agent to notify the building official when work is ready for inspection. It shall be the duty of the permit holder to provide access to and means for inspections of such work that are required by this code. Printed: 7/2/26 9:52 am Page 3 of 4 BUILDING PERMIT Permit Type: Sign Permit Number: SA2016-0003 Property Address: 50777 SANTA ROSA PLAZA A building or structure shall not be used or occupied in whole or in part, and a change of occupancy of a building or structure or portion thereof shall not be made, until the building official has issued a certificate of occupancy therefor as provided herein. Issuance of a certificate of occupancy shall not be construed as an approval of a violation of the provisions of the applicable code and other ordinances of the jurisdiction. Certificates presuming to give authority to violate or cancel the provisions of this code or other ordinances of the iurisdiction shall not be valid. A person shall not make connections from a utility, a source of energy, fuel, or power, or a water system or sewer system to any building or system that is regulated by the applicable code and other ordinances of the jurisdiction for which a permit is required, until approved by the buildina official. Printed: 7/2/26 9:52 am Page 4 of 4 EMBASSY SUITES by HILTON' La Quinta - Hotel B Spa January 12, 2016 To Whom it May Concern: We hereby authorize Coast Sign Inc. to proceed with the permit process to remove and re -install the Embassy Suites monument sign at the corner of Calle Tampico and Desert Club Drive. Coast Sign has been furnished site plans and approval from Embassy Suites by Hilton corporate offices to remove and replace the sign with newly designed signage. Should you have any questions or concerns, please contact me directly. Sincerely, Gerri Lynch AGM Embassy Suites by Hilton La Quinta Hotel & Spa 50-777 Santa Rosa Plaza La Quinta, Ca 92253 STATE OF CALIFORNIA SIGN LIGHTING CEC-NRCC-LTS-01-E Revised 06/14 Ift CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE NRCC-LTS-01-E Sign Lighting (Page 1 of 5) Project Name: Date Prepared: Project Address: Location of Sign " utdoor Signs ❑ Indoor Signs Phase of Sign Construction Q New Signs ❑ Sign Alterations Type of Lighting Control &New Lighting Controls ❑ Replaced Lighting Controls ❑ Not Installing Lighting Controls This Certificate of Compliance includes the following components (check all that apply) ❑ Mandatory Measures (Lighting Controls) ❑ Maximum Allowed Lighting Power ❑ Specific Lighting Sources 1. Mandatory Sign Lighting Controls NOTES: 1. The some responsible person may install both the sign lighting power and the sign lighting controls, or a different responsible person may install the sign lighting controls than the responsible person installing the sign lighting power. 2. The Mandatory Measures (sign lighting controls) are required for compliance with the sign lighting Standards. If the person responsible for installing the sign lighting power is not also responsible for the sign lighting controls, then the owner of the sign, general contractor, or architect shall be responsible to have the sign lighting controls installed. 3. If more than one person has responsibility for compliance, each responsible person shall prepare and sign a Certificate of Compliance and an Installation Certificate applicable to the portion of construction for which they are responsible; alternatively, the person with chief responsibilityfor construction shall prepare and sign the Certificate of Compliance Declaration Statement for the entire construction. la. Statements of Responsibility: Any person signing the Certificate of Compliance Declaration Statement on this NRCC-LTS-01-E shall complete Part la. Check Yes or No for all of the following statements: 1 I have responsibility for installing the sign lighting controls Yes, complete parts Sa and lb of this form ❑ No, complete part la of this form 2 There are no existing sign lighting controls and I will be installing compliant sign lighting controls ErYes ❑ No 3 There are no existing sign lighting controls and someone else will be responsible to install compliant sign lighting controls ❑ Yes allo There are existing sign lighting controls that do not comply with the applicable provision of §110.9 and §130.3 and I will be 4 installing compliant sign lighting controls ❑ Yes ENO There are existing sign lighting controls that do not comply with the applicable provision of §110.9 and §130.3 and someone 5 else will be responsible to install compliant sign lighting controls ❑ Yes 151-111-0 CA Building Energy Efficiency Standards - 2013 Nonresidential Compliance June 2014 STATE OF CALIFORNIA SIGN LIGHTING e \! '1 7� CEC-NRCC-LTS-01-E Revised 06/14 CALIFORNIA ENERGY COMMISSION � CERTIFICATE OF COMPLIANCE NRCC-LTS-01-E Sign Lighting (Page 2 of 5) Project Name: Emmay a (' Daft Prepared: I r 1b. Mandatory Sign Lighting Controls If the person signing the Certificate of Compliance Declaration Statement on this NRCC-LTS-01-E is responsible for complying with the sign lighting control requirements, that person shall answer all of the following questions: If there are construction documents, indicate where on the building plans the mandatory measures (sign lighting control) note block can be located: §330.3(a)1. All indoor sign lighting is controlled with an automatic time -switch control or astronomical time- Y N NA 1 switch control. ❑ ❑ Er §330.3(a)2A. All outdoor sign lighting is controlled with a photocontrol in addition to an automatic time- Y N NA switch control, or an astronomical time -switch control. ❑ ❑ 2 EXCEPTION to Section 130.3(a)2A: Outdoor signs in tunnels, and signs in large permanently covered outdoor y NA areas that are intended to be continuously lit, 24 hours per day and 365 days per year. ❑ §130.3(a)2B. All outdoor sign lighting that is ON both day and night is controlled with a dimmer that provides the ability to automatically reduce sign lighting power by a minimum of 65 percent during nighttime hours. Y N NA Signs that are illuminated at night and for more than 1 hour during daylight hours shall be considered ON both ❑ ❑ 3 day and night. EXCEPTION to Section 130.3(a)2B: Outdoor signs in tunnels and large covered areas that are intended to be Y NA illuminated both day and night. ❑ tr §330.3(a)3. Demand Responsive Electronic Message Center Control. An Electronic Message Center (EMC) Y N N/A having a new connected lighting power load greater than 15 kW has a control installed that is capable of ❑ ❑ 4 reducing the lighting power by a minimum of 30 percent when receiving a demand response signal. EXCEPTION to Section 130.3(a)3: Lighting for EMCs that is not permitted by a health or life safety statute, Y NA ordinance, or regulation to be reduced by 30 percent. ❑ Field Inspector Notes: CA Building Energy Efficiency Standards - 2013 Nonresidential Compliance June 2014 STATE OF CALIFORNIA SIGN LIGHTING CEC-NRCC-LTS-01-E Revised 06114 CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE NRCC-LTS-01-E Sign Lighting (Page 3 of 5) Projed Name' EMWSS� Date Prepared: t I r, I W 2. Maximum Allowed Lighting Power Method of Compliance Certificate of Compliance and Field Inspection Energy Checklist Complete this part if there are signs using the maximum allowed lighting power method of compliance. (Complete part 3 of this Certificate of Compliance if there are signs using the Specific lighting sources method of compliance) A B C D E F G H I J Symbol Or Code Description of the Sign OPTIONAL —Energy Verified Label (see instructions below) Allotted Watts Design Watts Complies Y/Ncomplies Filed Inspector Check that sign ✓ v a m VI 0 C v E v x.2 C W 3 2 l u Q G 3 LL 0 Q « F 3 t7 VI �' 0 V ✓ ❑ ❑ ❑ ❑ ❑ ❑ A Symbol or code used on the plans (when plans are required) and other documents. B A description of the sign, or location of sign on the building; and the location of sign on construction documents. C OPTIONAL- Check this box only if this sign has a permanent, pre-printed, factory -installed, ENERGY VERIFIED label, confirming that the sign complies with the Section 140.5 of the California 2013 Title 24, Part 6 Standards, using the Maximum Allowed Lighting Power method of compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized by Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National Standards Institute in accordance with ISO/IEC 17011. Surveillance by the Accredited Certification Body shall be an ongoing annual inspection program carried out by a Type A Inspection body in accordance with ISO/IEC 17020. For signs with such an ENERGY VERIFIED label, columns 'D' through' I' are not required to be filled out. Note: Using an ENERGY VERIFIED label is an optional method to validate compliance. An ENERGY VERIFIED label is not needed for compliance. D The sign area in square feet. E List "I" if the sign is internally illuminated. List "E" if the sign is externally illuminated. F Allowed watts per square foot. Enter 12 if the sign is listed as "I" in column E. Enter 2.3 if sign is listed as "E" in column E. G Multiply the square footage in column D times the allowed Lighting Power Density (LPD = watts) in column F. H Show the total installed watts in the sign, as determined according to the applicable provisions of §130(c). I Enter Y if the number in column H is less than or equal to the number in column G. Otherwise, the sign does not comply. J This page doubles as a field inspection checklist. Field Inspector Notes: CA Building Energy Efficiency Standards - 2013 Nonresidential Compliance June 2014 STATE OF CALIFORNIA SIGN LIGHTING GFGNRCGI TR.(N�lRevicwd M1141 Ift CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE NRCC-LTS-01-E Sign Lighting (Page 4 of 5) Pmje Name: Date Prepared: I 3. Speck Lighting Source Method of Compliance Certificate of Compliance and Field Inspection Energy Checklist Complete this part if there are signs using the Specific lighting source method of compliance. (Complete part 2 of this Certificate of Compliance if there are signs using the maximum allowed lighting power method of compliance) A B C D E OPTIONAL Specific light source used for nspector FieldCheck Symbol ENERGY VERIFIED compliance that Sign Check that Sign or Description label Shall include only lighting Complies Code (see instructions technologies listed below below) List all that apply ❑ ❑ ❑ ❑ A Symbol or code used on the plans (when plans are required) and other documents. B A narrative description of the sign, or location of sign on the building, and the location of sign on construction documents C OPTIONAL- Check this box only if this sign has a permanent, pre-printed, factory -installed ENERGY VERIFIED label, confirming that this sign complies with the Section 140.8 of the California 2013 Title 24, Part 6 Standards, using the Specific Lighting Source Method of Compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized by Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National Standards Institute in accordance with ISO/IEC 17011. Surveillance by the Accredited Certification Body shall be an ongoing annual inspection program carried out by a Type A Inspection body in accordance with ISO/IEC 17020. For signs with such an ENERGY VERIFIED label, column'D' is not required to be filled out. Note: Using an ENERGY VERIFIED label is an optional method to validate compliance. An ENERGY VERIFIED label is not needed forcom fiance. Specific Light Source Compliance Method. The signs) identified above use only the following lighting technologies: List all applicable numbers (1 through 9) that apply in column D above for each row. 1 I High pressure sodium lamps Metal halide lamps that are pulse start or ceramic served by a ballast that has a minimum efficiency of 88 percent or 1 greater. Ballast efficiency is the measured output wattage to the lamp divided by the measured operating input wattage when tested according to ANSI C82.6-2005. Metal halide lamps that are pulse start that are 320 watts or smaller, are not 250 watt or 175 watt lamps, and are served by a ballast that has a minimum efficiency of 80 percent. 3 Ballast efficiency is the measured output wattage to the lamp divided by the measured operating input wattage when tested according to ANSI C82.6-2005. Neon or cold cathode lamps with transformer or power supply efficiency greater than or equal to a minimum efficiency of 75 percent D 4 when the transformer or power supply rated output current is less than 50 mA. The ratio of the output wattage to the input wattage is at 100 percent tubing load. Neon or cold cathode lamps with transformer or power supply efficiency greater than or equal to a minimum efficiency of 68 percent 5 when the transformer or power supply rated output current is 50 mA or greater. The ratio of the output wattage to the Input wattage is at 100 percent tubing load. Fluorescent lighting systems meeting one of the following requirements: A. Use only lamps with a minimum color rendering index (CRI) of 6 80; or B. Use only electronic ballasts with a fundamental output frequency not less than 20 kHz. 7 Light emitting diodes (LEDs) with a power supply having an efficiency of 80 percent or greater; Single voltage external power supplies that are designed to convert 120 volt AC Input into lower voltage DC or AC output, and have a 8 nameplate output power less than or equal to 250 watts, shall comply with the applicable requirements of the Appliance Efficiency Regulations (Title 20). 9 Compact fluorescent lamps that do not contain a medium screw base sockets (E24/E26). E This page doubles as a field inspection checklist. Field Inspector Notes: CA Building Energy Efficiency Standards - 2013 Nonresidential Compliance June 2014 STATE OF CALIFORNIA SIGN LIGHTING CEGNRGG-LTS-01-E Revised 06114 CALIFORNIA ENERGY COMMISSION '"W CERTIFICATE OF COMPLIANCE NRCC-LTS-01-E Sign Lighting (Page 5 of 5) Project Name: t/Vt patePrepareE: ` ( DOCUMENTATION AUTHOR'S DECLARATION STATEMENT 1. 1 certify that this Certificate of Compliance documentation is accurate and complete. Documentation Author Name: Documentation Author Signature: Company:Q �� . signature Date: ` I Address: / ,,J O CEA( HERS Unification Identi cation (if applicable): CItY/State/i\Ipp � 0J CA 5 Phone: —7 u,[ f nO -76 5^� S- L RESPONSIBLE PERSON'S DECLARATION ATEMENT I certify the following under penalty of perjury, under the laws of the State of California: 1. The information provided on this Certificate of Compliance is true and correct. 2. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design identified on this Certificate of Compliance (responsible designer). 3. The energy features and performance specifications, materials, components, and manufactured devices for the building design or system design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of Regulations. 4. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application. S. I will ensure that a completed signed copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the building, and made available to the enforcement agency for all applicable inspections. I understand that a completed signed copy of this Certificate of Compliance is required to be Included with the documentation the builder provides to the building owner at occupancy. Responsible Designer Name: Responsible Designer Signature: Company: Pp�/��YNL• Dale Signed: Address: License: y q� city/state/zip : O Phone: CA Building Energy Efficiency Standards - 2013 Nonresidential Compliance June 2014 1 11r 1 SITE PLAN '-r"i r '1W / 11 « Alb:_ F L 4W - W / T ' _.• 1 re COASTS'GV— IN C O R P O R A T E D Date: 09-09-15 Project Name: EMBASSY SUITES Scale: NTS Address: 50-777 Santa Rosa Plaza Drawn: Flor B. City / State: LA QUINTA, CA 1500 West Embassy St. Anaheim, CA 92802 (714)520-9144 FAX: (714)520-5a47 Sales: Ryan W. Client Approval: Date: This is an original unpublished drawing created by Coast Sign, Inc. It is submitted foryour personal use in conjunction with a project being planned for you by Coast Sign, Inc., And shall not be reproduced, used by or disclosed to any firm or corporation for any purpose whatsoever withoutwritten permission. VI �I SIGNAGE SPECIFICATIONS REPLACEMENT CHANNEL LETTERS A Manufacture and Install (1) set of Channel Letters AREA MAP 1,41%LI C///asgJ c�� a Wa Y yQ' C�WdView Desert Fall WaY Villa Cortina Apantl .1 /Embassy Suites La •Ouinta -Hotel 8 Spa 5299 Benjamin Franklin .. Vacan— Pemal w Elementary School c t � Calle Tampico Calle Tampico wn v, Old ToCompany M.Vlyr „ Coffee � n Old Town La Ouinta Carder Par' Stott Pizza Bar 6 Grill �' Casual eatery V th ri The Grill on Main 5Ports Gar enargVG o gle emda La Fonda M,pd-92015Goag1e Terms Privacy maoegoogle.com Designer Date Revision Notes DESIGN DRAWING 1 of 3 KH 10/30/15 Refer to PathFinder. Request Number: Hermes A. 02-01-15 Refer to PathFinder. PRJ-EMST-99989-R6 Rodel B. 12-07-15 Refer to PathFinder. File Location: W:\Hilton\Art\Embassy Suites\PRJ-EMST-99989 11 X 17 TEMPLATE VERSION 7.0 NOTE REFACE EXISTING GROUND SIGN. NOTE: NOT A STANDARD SIGN NOTE: CONCEPTUAL IMAGE ONLY CUSTOM DUE TO ILLUMINATION VERIFY ARTWORK AND DIMENSIONS 11 PRIOR TO FABRICATION 11 PHOTO ENHANCEMENT- SIGN A 11 JEJ 1V1 -" 1`1 011, ►7 r �IJ •�:', i' .. .. ,�� 0 Alr`.1 `��i�• y�ti.�L �F• •. }'�¢Y.•�11�71�!��(.��'•., �f •r I�M� " _ _ ti��••t.�L`s• 'i ti.� ,�j� - •7'i.. "�;bl�-g7TT'''-``,:_ ��.�-�.R.L,.i�• J,a` if- .f r� y^_.r1_ _. � -.. ••t. r• .•�Ii �'" •.Y i` H; +',i- ��,�•• �1Fii ate. ^� r. ly"A. _--�♦_ , �-r�� •+►�' -4 �. 'ter. L► i 7 - 'i.r� - • : *Ro Sri ,iti�-'fir RiPP ~ n_• • 'Y..� `lj ♦ A �%" , 4 , �. Date: Project Name: 09-09-15 EMBASSY SUITES 're¢ "'•!�'3 COAST SIGH Scale: Noted Address: 50-777 Santa Rosa Plaza •- Drawn: City I State: N C O R P O R A T E D Flor B. LA QUINTA, CA +• 1500 West Embassy St. Anaheim, CA 92802 Sales: Client Approval: Date: (714)520-9144 FAX: (714)520-5a47 Ryan W. SUITE S by HILTON This is an original unpublished drawing created by Coast Sign, Inc. It is submitted foryour personal use in conjunction with a project being planned for you by Coast Sign, Inc., And shall not be reproduced, used by or disclosed to any firm or corporation for any purpose whatsoever withoutwritten permission. Designer Date Revision Notes DESIGN DRAWING 2 of 3 KH 10/30/15 Refer to PathFinder. Request Number: Hermes A. 02-01-15 Refer to PathFinder. PRJ-EMST-99989-R6 Rodel B. 12-07-15 Refer to PathFinder. File Location: W:\Hilton\Art\Embassy Suites\PRJ-EMST-99989 11 X 17 TEMPLATE VERSION 7.0 DETAIL @ CHANNEL LETTERS 0 CV co 3" 1'-6 3/4" 71-011 51-111 EMBASSY (SUITES J J H W by HILTON LU 1/4" FCO LETTERS STUD MOUNTED REPLACEMENT CHANNEL LETTERS - REMOTE SCALE: 3/4" = V-0" LOGO CABINET: 1 1/2" DEEP EXTRUDED ALUMINUM CABINET. PAINT FACE OF RETAINERS TO MATCH PMS 3278 GREEN (SEMI -GLOSS). PAINT FILLER & FILLER SIDE OF RETAINERS PMS 419c DARK GRAY (SEMI -GLOSS). INTERIOR PAINTED with STARBRITE L.E.P. .177" (4.5mm) THK. WRT30 WHITE CYRO SG PLASTIC FACES with 1st SURFACE 3M (OR APPROVED EQUIV.) 3630-6520 GREEN VINYL BACKGROUND. WHITE SHO-THRU GRAPHICS. ILLUMINATED WITH WHITE L.E.D.s CHANNEL LETTERS: 1 1/2" DEEP LETTERS with REMOTE POWER SUPPLIES. .040" (1 mm) THK. ALUM. RETURNS. RETURNS PTM. #310 CHINA WHITE. - PAINT SAMPLE AVAILABLE UPON REQUEST. INTERIORS PAINTED with STARBRITE L.E.P. ALUMINUM FACE WITH CLEAR BACKS BLACK VINYL COPY. WHITE L.E.D. MODULES (G.E. OR APPROVED EQUIV.). INSTALL L.E.D. PER MANUFACTURER'S RECOMMENDATION. ALL ILLUMINATED SIGNAGE REQUIRE THE CLIENT'S ELECTRICIAN TO FURNISH & INSTALL A COMPLETE PHOTOCELL AND/OR TIME CLOCK TO ALLOW SIGNS TO OPERATE AT DESIGNATED INTERVALS. HOWEVER, SIGN SHALL NEVER OPERATE ON A 24/7 BASIS. .040" (1 mm) THK. ALUM. RETURN. COLOR VARIES (SEE SPECS) - 1" (25.4mm) JEWELITE RETAINER (OR APPROVED EQUIV.) TO BE, USED PER MANUFACTURER'S RECOMMENDAIONS. .177"(4.5mm) THK. CYRO SG — FACES. SEE PREVIOUS SHEET FOR COLOR TREATMENT. .063"(1.6mm) THK. ALUM. CAD CUT BACKS WHITE L.E.D. (INSTALL LE PER MANUFACTURER'S RECOMMENDATIONS PAINT LETTER INTERIOR with STARBRITE L.E.P. WEEP HOLES IN LOW POINTS OF LETTERS. (2) MIN. LIGHT SHIELD REQUIRED AT EA. HOLE. NIGHT VIEW .375" (9.5mm) DIA. NON -CORROSIVE HARDWARE AS REQUIRED PER WALL CONSTRUCTION. 2" x 2" (50.8mm x 50.8mm) GALV. CLIP ON BACK OF LETTER. SEAL -TIGHT FROM LETTER BACKS TO TRANSFORMER BOX L.E.D. POWER SUPPLY IN TRANS. BOX BEHIND WALL O O — J-BOX with PRIMARY O ELECTRICAL (BY OTHERS) .040" (1 mm) THK. ALUM. RI COLOR VARIES (SEE SPE, ALUMINUM F CLEARACR WHITE L.E.D. (INSTALL PER MANUFACTURER'; RECOMMENDATIONS PAINT LETTER INTERIO with STARBRITE L.E.P. WEEP HOLES IN LOW F OF LETTERS. (2) MIN. SHIELD REQUIRED AT E 1 1/2" ' (9.5mm) DIA. NON -CORROSIVE DWARE AS REQUIRED PER L CONSTRUCTION. 2" (50.8mm x 50.8mm) GALV. ON BACK OF ER, SEAL -TIGHT FROM LETTER BACKS TO TRANSFORMER BOX L.E.D. POWER SUPPLY IN TRANS. BOX BEHIND WALL J-BOX with PRIMARY ELECTRICAL (BY OTHERS) LOGO SECTION -REMOTE POWER SUPPLY LETTER SECTION -REMOTE POWER SUPPLY NOTE: NOT A STANDARD SIGN NOTE: CONCEPTUAL IMAGE ONLY CUSTOM DUE TO ILLUMINATION VERIFY ARTWORK AND DIMENSIONS PRIOR TO FABRICATION COAST SIGN N C O R P O R A T E ID 1500 West Embassy St. Anaheim, CA 92802 (714) 520-9144 FAX: (714) 520-5847 Date: 09-09-15 project Name: EMBASSY SUITES This is an original unpublished drawing created by Coast use in co unIt ction submitted for your personal use in conjunction with a foryour a project being planned for you by Coast Sign, Inc., And shall not be reproduced, used by or disclosed to any firm or corporation for any purpose whatsoever without written permission. No. Designer Date Revision Notes DESIGN D RAW I N G 3 of 3 Scale: Noted Address: 50-777 Santa Rosa Plaza 1 KH 10/30/15 Refer to PathFinder. Request Number: PRJ-EMST-99989-R6 File Location: W:\Hilton\Art\Embassy Suites\PRJ-EMST-99989 2 Hermes A. 02-01-15 Refer to PathFinder. Drawn: Drawn: B. City/State: LA QUINTA, CA 3 4 Sales: Ryan W. Client Approval: Date: 5 Rodel B. 12-07-15 Refer to PathFinder. g 11 X 17 TEMPLATE VERSION 7.0