SAD 1995-065Q&A
MEMORANDUM
CASE: SAS
Your sign permit application is hereby approved, subject to the following provisions or
conditions:
The sign shall. be installed pursuant to the attached exhibits.
2.. The permit shall expire on
3. The maximum number of signs anners permitted shall be 8
4. If the sign permit involves permanent electric facilities, a building. permit shall be
obtained.
5. If the sign is a temporary sign, please contact Mr. Don Whelchel in the Code
Enforcement Department once the sign(s) has been installed so that he can inspect
the sign (or signs) and verify compliance . with the attached requirements. Mr.
Whelchel will need to see this memorandum so that he can attach a City decal 'to
your paperwork in the field. He can be reached by.calling 777-7050. If the sign is
permanent, please contact Mr. Whelchel prior to installing the sign at the site so that
he can be present while the sign (or signs) is being installed.
o
6. Additional Conditions: ,�e� � �c ,0 /,--J #=z,p-,—rA7 T t, J
Thank you for your cooperation.
Attachments
c: Code Enforcement Department
Building Department
MM
V,
SUBDIVISION .FLAG POLICY ..-
1. Eight flags shall be considered the maximum number of flags
permitted.
2. The pole .heights shall be a maximum of 20-feet in height for the
perimeter of the project and 16-feet for the interior.
3. The size of each flag shall be a maximum of 18 square feet for the
perimeter and 12 square feet for the interior.
4. Rigid flags, secured on more than one side, are not permitted.
5. The flags may vary in color or have multiple colors, but fluorescent
colors are not allowed.
6. Any wording on the flags shall be limited to the name of the
subdivision and/or name of the developer. Flags which have a
phrase or part of a phrase which is read on multiple or subsequent
flags shall not be allowed..
7. The flags shall be approved for a six month period then reviewed by
the Community Development. Department and if in acceptable
condition, granted. an extension for up to six months.
8. There shall be no more than one flag per pole.
9. The height of the flag pole shall be measured from finish grade at the
property line. .
10. The flag pole size shall be determined by the lateral load and size of
the flag. Staff shall supply applicants with the acceptable standards.
FORK042
October 18.;..1994 (Minute Motion.94-229). - City Council
CORRESPONDENCE
r
r
1